===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
Configured MCU 'mcu' (1024 moves)
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-185-gdebcc22f'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
webhooks client 3041199168: {'program': 'Moonraker', 'version': 'v0.7.1-253-g3e70e4b'}
=============== Log rollover at Fri Dec 31 00:00:00 2021 ===============
Stats 3925.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3203032 bytes_read=1543449 bytes_retransmit=9 bytes_invalid=0 send_seq=86103 receive_seq=86103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.074 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=677358 sysload=0.15 cputime=208.928 memavail=1638284 print_time=3936.071 buffer_time=2.165 print_stall=10 extruder: target=215 temp=215.0 pwm=0.460
Stats 3926.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3203754 bytes_read=1543851 bytes_retransmit=9 bytes_invalid=0 send_seq=86123 receive_seq=86123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=677422 sysload=0.15 cputime=208.981 memavail=1632928 print_time=3937.033 buffer_time=2.126 print_stall=10 extruder: target=215 temp=215.1 pwm=0.435
Stats 3927.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3204478 bytes_read=1544266 bytes_retransmit=9 bytes_invalid=0 send_seq=86143 receive_seq=86143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=677519 sysload=0.15 cputime=209.017 memavail=1634284 print_time=3938.220 buffer_time=2.312 print_stall=10 extruder: target=215 temp=215.1 pwm=0.473
Stats 3928.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3205183 bytes_read=1544665 bytes_retransmit=9 bytes_invalid=0 send_seq=86165 receive_seq=86165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=677584 sysload=0.14 cputime=209.073 memavail=1634284 print_time=3939.152 buffer_time=2.242 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 3929.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3205877 bytes_read=1545047 bytes_retransmit=9 bytes_invalid=0 send_seq=86186 receive_seq=86186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.453 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=677679 sysload=0.14 cputime=209.126 memavail=1634556 print_time=3940.075 buffer_time=2.164 print_stall=10 extruder: target=215 temp=215.1 pwm=0.430
Stats 3930.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3206516 bytes_read=1545442 bytes_retransmit=9 bytes_invalid=0 send_seq=86204 receive_seq=86204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.8 pwm=0.935 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=677744 sysload=0.14 cputime=209.167 memavail=1634560 print_time=3940.985 buffer_time=2.074 print_stall=10 extruder: target=215 temp=215.0 pwm=0.501
Stats 3931.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3207619 bytes_read=1545891 bytes_retransmit=9 bytes_invalid=0 send_seq=86232 receive_seq=86232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.344 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=677871 sysload=0.14 cputime=209.217 memavail=1634308 print_time=3942.763 buffer_time=2.850 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 3932.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3208252 bytes_read=1546278 bytes_retransmit=9 bytes_invalid=0 send_seq=86252 receive_seq=86252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=677935 sysload=0.14 cputime=209.270 memavail=1634500 print_time=3943.628 buffer_time=2.714 print_stall=10 extruder: target=215 temp=215.2 pwm=0.352
Stats 3933.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3208947 bytes_read=1546700 bytes_retransmit=9 bytes_invalid=0 send_seq=86273 receive_seq=86273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=678001 sysload=0.12 cputime=209.325 memavail=1634508 print_time=3944.478 buffer_time=2.561 print_stall=10 extruder: target=215 temp=214.9 pwm=0.513
Stats 3934.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3209628 bytes_read=1547106 bytes_retransmit=9 bytes_invalid=0 send_seq=86294 receive_seq=86294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.263 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=678094 sysload=0.12 cputime=209.378 memavail=1634700 print_time=3945.321 buffer_time=2.403 print_stall=10 extruder: target=215 temp=215.1 pwm=0.404
Stats 3935.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3210344 bytes_read=1547503 bytes_retransmit=9 bytes_invalid=0 send_seq=86316 receive_seq=86316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.443 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=678159 sysload=0.12 cputime=209.421 memavail=1634952 print_time=3946.125 buffer_time=2.206 print_stall=10 extruder: target=215 temp=215.0 pwm=0.508
Stats 3936.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3210976 bytes_read=1547925 bytes_retransmit=9 bytes_invalid=0 send_seq=86337 receive_seq=86337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.8 pwm=0.530 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=678223 sysload=0.12 cputime=209.474 memavail=1634892 print_time=3946.915 buffer_time=1.995 print_stall=10 extruder: target=215 temp=215.1 pwm=0.420
Stats 3937.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3212259 bytes_read=1548406 bytes_retransmit=9 bytes_invalid=0 send_seq=86370 receive_seq=86370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.8 pwm=0.609 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=678380 sysload=0.12 cputime=209.540 memavail=1634136 print_time=3948.429 buffer_time=2.502 print_stall=10 extruder: target=215 temp=215.0 pwm=0.401
Stats 3938.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3212886 bytes_read=1548793 bytes_retransmit=9 bytes_invalid=0 send_seq=86390 receive_seq=86390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=678444 sysload=0.11 cputime=209.594 memavail=1634148 print_time=3949.148 buffer_time=2.221 print_stall=10 extruder: target=215 temp=215.1 pwm=0.348
Stats 3939.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3213962 bytes_read=1549245 bytes_retransmit=9 bytes_invalid=0 send_seq=86417 receive_seq=86417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=678571 sysload=0.11 cputime=209.652 memavail=1634148 print_time=3950.496 buffer_time=2.569 print_stall=10 extruder: target=215 temp=214.9 pwm=0.511
Stats 3940.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3214580 bytes_read=1549646 bytes_retransmit=9 bytes_invalid=0 send_seq=86437 receive_seq=86437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.373 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=678667 sysload=0.11 cputime=209.704 memavail=1633896 print_time=3951.122 buffer_time=2.194 print_stall=10 extruder: target=215 temp=214.9 pwm=0.511
Stats 3941.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=3215648 bytes_read=1550078 bytes_retransmit=9 bytes_invalid=0 send_seq=86463 receive_seq=86463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.016 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=678795 sysload=0.11 cputime=209.764 memavail=1634268 print_time=3952.256 buffer_time=2.328 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 3942.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=3216711 bytes_read=1550530 bytes_retransmit=9 bytes_invalid=0 send_seq=86490 receive_seq=86490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.436 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=678951 sysload=0.11 cputime=209.820 memavail=1634520 print_time=3953.200 buffer_time=2.271 print_stall=10 extruder: target=215 temp=215.0 pwm=0.437
Stats 3943.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=3217887 bytes_read=1550976 bytes_retransmit=9 bytes_invalid=0 send_seq=86519 receive_seq=86519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.078 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=679117 sysload=0.10 cputime=209.880 memavail=1634772 print_time=3954.001 buffer_time=2.072 print_stall=10 extruder: target=215 temp=215.0 pwm=0.490
Stats 3944.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=3219386 bytes_read=1551418 bytes_retransmit=9 bytes_invalid=0 send_seq=86550 receive_seq=86550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=679506 sysload=0.10 cputime=209.925 memavail=1634660 print_time=3955.007 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.1 pwm=0.406
Stats 3945.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=3220482 bytes_read=1551870 bytes_retransmit=9 bytes_invalid=0 send_seq=86577 receive_seq=86577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=679818 sysload=0.10 cputime=209.982 memavail=1634352 print_time=3956.042 buffer_time=2.111 print_stall=10 extruder: target=215 temp=215.0 pwm=0.531
Stats 3946.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=3221166 bytes_read=1552276 bytes_retransmit=9 bytes_invalid=0 send_seq=86595 receive_seq=86595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=680129 sysload=0.10 cputime=210.027 memavail=1633852 print_time=3957.058 buffer_time=2.126 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 3947.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=3221798 bytes_read=1552658 bytes_retransmit=9 bytes_invalid=0 send_seq=86614 receive_seq=86614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.569 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=680447 sysload=0.10 cputime=210.079 memavail=1633852 print_time=3958.073 buffer_time=2.138 print_stall=10 extruder: target=215 temp=215.0 pwm=0.455
Stats 3948.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=3222521 bytes_read=1553080 bytes_retransmit=9 bytes_invalid=0 send_seq=86635 receive_seq=86635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=680766 sysload=0.10 cputime=210.138 memavail=1633844 print_time=3959.088 buffer_time=2.153 print_stall=10 extruder: target=215 temp=215.1 pwm=0.466
Stats 3949.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=3223251 bytes_read=1553481 bytes_retransmit=9 bytes_invalid=0 send_seq=86655 receive_seq=86655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=681053 sysload=0.10 cputime=210.193 memavail=1633820 print_time=3959.937 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.1 pwm=0.486
Stats 3950.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=3223932 bytes_read=1553863 bytes_retransmit=9 bytes_invalid=0 send_seq=86674 receive_seq=86674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.542 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=681366 sysload=0.10 cputime=210.249 memavail=1633852 print_time=3961.060 buffer_time=2.121 print_stall=10 extruder: target=215 temp=215.2 pwm=0.367
Stats 3951.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3224624 bytes_read=1554305 bytes_retransmit=9 bytes_invalid=0 send_seq=86696 receive_seq=86696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=681649 sysload=0.10 cputime=210.311 memavail=1634164 print_time=3962.104 buffer_time=2.163 print_stall=10 extruder: target=215 temp=215.2 pwm=0.435
Stats 3952.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3225255 bytes_read=1554706 bytes_retransmit=9 bytes_invalid=0 send_seq=86716 receive_seq=86716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.355 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=681938 sysload=0.10 cputime=210.370 memavail=1634192 print_time=3963.017 buffer_time=2.076 print_stall=10 extruder: target=215 temp=215.1 pwm=0.508
Stats 3953.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3225958 bytes_read=1555088 bytes_retransmit=9 bytes_invalid=0 send_seq=86735 receive_seq=86735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.401 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=682261 sysload=0.09 cputime=210.430 memavail=1634192 print_time=3964.061 buffer_time=2.119 print_stall=10 extruder: target=215 temp=215.1 pwm=0.499
Stats 3954.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3226702 bytes_read=1555515 bytes_retransmit=9 bytes_invalid=0 send_seq=86757 receive_seq=86757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=682584 sysload=0.09 cputime=210.490 memavail=1634188 print_time=3964.974 buffer_time=2.030 print_stall=10 extruder: target=215 temp=215.1 pwm=0.446
Stats 3955.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3227351 bytes_read=1555916 bytes_retransmit=9 bytes_invalid=0 send_seq=86777 receive_seq=86777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.361 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=682835 sysload=0.09 cputime=210.551 memavail=1634200 print_time=3966.223 buffer_time=2.279 print_stall=10 extruder: target=215 temp=215.1 pwm=0.454
Stats 3956.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3227868 bytes_read=1556298 bytes_retransmit=9 bytes_invalid=0 send_seq=86793 receive_seq=86793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.438 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=683027 sysload=0.09 cputime=210.595 memavail=1633696 print_time=3967.116 buffer_time=2.170 print_stall=10 extruder: target=215 temp=215.1 pwm=0.454
Stats 3957.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3228463 bytes_read=1556700 bytes_retransmit=9 bytes_invalid=0 send_seq=86810 receive_seq=86810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.050 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=683284 sysload=0.09 cputime=210.649 memavail=1633948 print_time=3968.187 buffer_time=2.239 print_stall=10 extruder: target=215 temp=215.0 pwm=0.521
Stats 3958.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3229089 bytes_read=1557091 bytes_retransmit=9 bytes_invalid=0 send_seq=86828 receive_seq=86828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=683544 sysload=0.08 cputime=210.709 memavail=1634200 print_time=3969.437 buffer_time=2.488 print_stall=10 extruder: target=215 temp=215.2 pwm=0.335
Stats 3959.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3229610 bytes_read=1557473 bytes_retransmit=9 bytes_invalid=0 send_seq=86847 receive_seq=86847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.513 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=683676 sysload=0.08 cputime=210.749 memavail=1634200 print_time=3969.972 buffer_time=2.022 print_stall=10 extruder: target=215 temp=215.2 pwm=0.450
Stats 3960.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3230175 bytes_read=1557885 bytes_retransmit=9 bytes_invalid=0 send_seq=86866 receive_seq=86866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=684006 sysload=0.08 cputime=210.803 memavail=1634452 print_time=3971.070 buffer_time=2.118 print_stall=10 extruder: target=215 temp=215.2 pwm=0.450
Stats 3961.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3231617 bytes_read=1558387 bytes_retransmit=9 bytes_invalid=0 send_seq=86901 receive_seq=86901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.382 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=684230 sysload=0.08 cputime=210.865 memavail=1634468 print_time=3972.274 buffer_time=2.320 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 3962.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3232605 bytes_read=1558794 bytes_retransmit=9 bytes_invalid=0 send_seq=86925 receive_seq=86925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=684358 sysload=0.08 cputime=210.921 memavail=1633988 print_time=3973.296 buffer_time=2.341 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 3963.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3233714 bytes_read=1559246 bytes_retransmit=9 bytes_invalid=0 send_seq=86952 receive_seq=86952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=684515 sysload=0.07 cputime=210.979 memavail=1634020 print_time=3974.495 buffer_time=2.538 print_stall=10 extruder: target=215 temp=215.1 pwm=0.440
Stats 3964.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3234345 bytes_read=1559647 bytes_retransmit=9 bytes_invalid=0 send_seq=86972 receive_seq=86972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.320 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=684579 sysload=0.07 cputime=211.031 memavail=1634020 print_time=3975.144 buffer_time=2.182 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 3965.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3235438 bytes_read=1560079 bytes_retransmit=9 bytes_invalid=0 send_seq=87001 receive_seq=87001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.044 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=684738 sysload=0.07 cputime=211.089 memavail=1634524 print_time=3976.552 buffer_time=2.589 print_stall=10 extruder: target=215 temp=215.1 pwm=0.398
Stats 3966.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3236125 bytes_read=1560526 bytes_retransmit=9 bytes_invalid=0 send_seq=87024 receive_seq=87024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=684802 sysload=0.07 cputime=211.133 memavail=1634280 print_time=3977.278 buffer_time=2.314 print_stall=10 extruder: target=215 temp=214.8 pwm=0.564
Stats 3967.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3236779 bytes_read=1560932 bytes_retransmit=9 bytes_invalid=0 send_seq=87045 receive_seq=87045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=684866 sysload=0.07 cputime=211.181 memavail=1634280 print_time=3978.039 buffer_time=2.074 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 3968.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3237750 bytes_read=1561344 bytes_retransmit=9 bytes_invalid=0 send_seq=87070 receive_seq=87070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.041 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=684995 sysload=0.07 cputime=211.240 memavail=1634280 print_time=3979.630 buffer_time=2.664 print_stall=10 extruder: target=215 temp=215.0 pwm=0.448
Stats 3969.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3238396 bytes_read=1561776 bytes_retransmit=9 bytes_invalid=0 send_seq=87093 receive_seq=87093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=685058 sysload=0.07 cputime=211.294 memavail=1634476 print_time=3980.461 buffer_time=2.494 print_stall=10 extruder: target=215 temp=215.1 pwm=0.389
Stats 3970.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3239113 bytes_read=1562187 bytes_retransmit=9 bytes_invalid=0 send_seq=87115 receive_seq=87115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=685123 sysload=0.07 cputime=211.331 memavail=1634728 print_time=3981.305 buffer_time=2.338 print_stall=10 extruder: target=215 temp=215.0 pwm=0.497
Stats 3971.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3239786 bytes_read=1562569 bytes_retransmit=9 bytes_invalid=0 send_seq=87134 receive_seq=87134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=685186 sysload=0.07 cputime=211.378 memavail=1634980 print_time=3982.165 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.0 pwm=0.533
Stats 3972.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3240456 bytes_read=1563020 bytes_retransmit=9 bytes_invalid=0 send_seq=87155 receive_seq=87155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.425 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=685252 sysload=0.07 cputime=211.434 memavail=1634728 print_time=3983.040 buffer_time=2.071 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 3973.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3241553 bytes_read=1563452 bytes_retransmit=9 bytes_invalid=0 send_seq=87184 receive_seq=87184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=685412 sysload=0.06 cputime=211.492 memavail=1634980 print_time=3984.849 buffer_time=2.877 print_stall=10 extruder: target=215 temp=215.0 pwm=0.461
Stats 3974.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3242213 bytes_read=1563844 bytes_retransmit=9 bytes_invalid=0 send_seq=87205 receive_seq=87205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=685475 sysload=0.06 cputime=211.529 memavail=1634668 print_time=3985.756 buffer_time=2.784 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 3975.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3242899 bytes_read=1564290 bytes_retransmit=9 bytes_invalid=0 send_seq=87228 receive_seq=87228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=685540 sysload=0.06 cputime=211.580 memavail=1634356 print_time=3986.684 buffer_time=2.709 print_stall=10 extruder: target=215 temp=214.9 pwm=0.538
Stats 3976.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3243579 bytes_read=1564697 bytes_retransmit=9 bytes_invalid=0 send_seq=87249 receive_seq=87249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=685603 sysload=0.06 cputime=211.623 memavail=1633996 print_time=3987.621 buffer_time=2.646 print_stall=10 extruder: target=215 temp=215.0 pwm=0.501
Stats 3977.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3244231 bytes_read=1565094 bytes_retransmit=9 bytes_invalid=0 send_seq=87268 receive_seq=87268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=11 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.365 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=685668 sysload=0.06 cputime=211.671 memavail=1633940 print_time=3988.569 buffer_time=2.591 print_stall=10 extruder: target=215 temp=215.0 pwm=0.412
Stats 3978.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3244952 bytes_read=1565505 bytes_retransmit=9 bytes_invalid=0 send_seq=87288 receive_seq=87287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=685731 sysload=0.14 cputime=211.724 memavail=1633688 print_time=3989.526 buffer_time=2.548 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 3979.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3245540 bytes_read=1565892 bytes_retransmit=9 bytes_invalid=0 send_seq=87307 receive_seq=87307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=685829 sysload=0.14 cputime=211.773 memavail=1633748 print_time=3990.498 buffer_time=2.519 print_stall=10 extruder: target=215 temp=214.8 pwm=0.565
Stats 3980.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3246248 bytes_read=1566304 bytes_retransmit=9 bytes_invalid=0 send_seq=87329 receive_seq=87329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=685893 sysload=0.14 cputime=211.828 memavail=1634008 print_time=3991.468 buffer_time=2.485 print_stall=10 extruder: target=215 temp=215.0 pwm=0.445
Stats 3981.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3246984 bytes_read=1566730 bytes_retransmit=9 bytes_invalid=0 send_seq=87351 receive_seq=87351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=685959 sysload=0.14 cputime=211.886 memavail=1634008 print_time=3992.444 buffer_time=2.461 print_stall=10 extruder: target=215 temp=214.9 pwm=0.523
Stats 3982.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3247640 bytes_read=1567127 bytes_retransmit=9 bytes_invalid=0 send_seq=87370 receive_seq=87370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=686023 sysload=0.14 cputime=211.936 memavail=1634512 print_time=3993.426 buffer_time=2.442 print_stall=10 extruder: target=215 temp=214.9 pwm=0.523
Stats 3983.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3248325 bytes_read=1567534 bytes_retransmit=9 bytes_invalid=0 send_seq=87391 receive_seq=87391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.010 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=686089 sysload=0.13 cputime=211.992 memavail=1633948 print_time=3994.412 buffer_time=2.427 print_stall=10 extruder: target=215 temp=215.0 pwm=0.420
Stats 3984.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3249009 bytes_read=1567950 bytes_retransmit=9 bytes_invalid=0 send_seq=87411 receive_seq=87411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=686153 sysload=0.13 cputime=212.046 memavail=1634144 print_time=3995.403 buffer_time=2.416 print_stall=10 extruder: target=215 temp=214.8 pwm=0.543
Stats 3985.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3249713 bytes_read=1568342 bytes_retransmit=9 bytes_invalid=0 send_seq=87432 receive_seq=87432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.460 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=686252 sysload=0.13 cputime=212.102 memavail=1634112 print_time=3996.404 buffer_time=2.416 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 3986.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3250424 bytes_read=1568749 bytes_retransmit=9 bytes_invalid=0 send_seq=87453 receive_seq=87453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=686315 sysload=0.13 cputime=212.160 memavail=1633832 print_time=3997.396 buffer_time=2.407 print_stall=10 extruder: target=215 temp=214.8 pwm=0.551
Stats 3987.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3251124 bytes_read=1569184 bytes_retransmit=9 bytes_invalid=0 send_seq=87475 receive_seq=87475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.131 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=686379 sysload=0.13 cputime=212.215 memavail=1633840 print_time=3998.392 buffer_time=2.402 print_stall=10 extruder: target=215 temp=215.1 pwm=0.349
Stats 3988.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3251793 bytes_read=1569561 bytes_retransmit=9 bytes_invalid=0 send_seq=87495 receive_seq=87495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=686440 sysload=0.28 cputime=212.270 memavail=1634092 print_time=3999.388 buffer_time=2.396 print_stall=10 extruder: target=215 temp=214.8 pwm=0.522
Stats 3989.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3252476 bytes_read=1569952 bytes_retransmit=9 bytes_invalid=0 send_seq=87515 receive_seq=87515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=686504 sysload=0.28 cputime=212.326 memavail=1634096 print_time=4000.384 buffer_time=2.391 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 3990.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3253168 bytes_read=1570366 bytes_retransmit=9 bytes_invalid=0 send_seq=87537 receive_seq=87537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.463 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=686568 sysload=0.28 cputime=212.379 memavail=1634160 print_time=4001.380 buffer_time=2.386 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 3991.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3253847 bytes_read=1570750 bytes_retransmit=9 bytes_invalid=0 send_seq=87557 receive_seq=87557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=686667 sysload=0.28 cputime=212.432 memavail=1634220 print_time=4002.383 buffer_time=2.388 print_stall=10 extruder: target=215 temp=214.9 pwm=0.508
Stats 3992.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3254487 bytes_read=1571162 bytes_retransmit=9 bytes_invalid=0 send_seq=87576 receive_seq=87576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=686731 sysload=0.28 cputime=212.483 memavail=1634220 print_time=4003.368 buffer_time=2.371 print_stall=10 extruder: target=215 temp=214.9 pwm=0.508
Stats 3993.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3255188 bytes_read=1571583 bytes_retransmit=9 bytes_invalid=0 send_seq=87597 receive_seq=87597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=686796 sysload=0.33 cputime=212.539 memavail=1634472 print_time=4004.355 buffer_time=2.357 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 3994.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3255872 bytes_read=1571970 bytes_retransmit=9 bytes_invalid=0 send_seq=87617 receive_seq=87617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.461 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=686858 sysload=0.33 cputime=212.590 memavail=1634724 print_time=4005.338 buffer_time=2.338 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 3995.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3256504 bytes_read=1572362 bytes_retransmit=9 bytes_invalid=0 send_seq=87635 receive_seq=87635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=686923 sysload=0.33 cputime=212.642 memavail=1634672 print_time=4006.315 buffer_time=2.314 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 3996.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3257194 bytes_read=1572798 bytes_retransmit=9 bytes_invalid=0 send_seq=87656 receive_seq=87656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=686986 sysload=0.33 cputime=212.684 memavail=1634688 print_time=4007.288 buffer_time=2.287 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 3997.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3257851 bytes_read=1573180 bytes_retransmit=9 bytes_invalid=0 send_seq=87675 receive_seq=87675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=687083 sysload=0.33 cputime=212.733 memavail=1634928 print_time=4008.265 buffer_time=2.261 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 3998.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3258486 bytes_read=1573572 bytes_retransmit=9 bytes_invalid=0 send_seq=87693 receive_seq=87693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=687144 sysload=0.31 cputime=212.787 memavail=1634684 print_time=4009.216 buffer_time=2.210 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 3999.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3259165 bytes_read=1573983 bytes_retransmit=9 bytes_invalid=0 send_seq=87712 receive_seq=87712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=687209 sysload=0.31 cputime=212.843 memavail=1634416 print_time=4010.165 buffer_time=2.158 print_stall=10 extruder: target=215 temp=215.0 pwm=0.425
Stats 4000.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3259797 bytes_read=1574365 bytes_retransmit=9 bytes_invalid=0 send_seq=87731 receive_seq=87731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=687272 sysload=0.31 cputime=212.895 memavail=1634424 print_time=4011.105 buffer_time=2.097 print_stall=10 extruder: target=215 temp=215.0 pwm=0.425
Stats 4001.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3260452 bytes_read=1574797 bytes_retransmit=9 bytes_invalid=0 send_seq=87751 receive_seq=87751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=687337 sysload=0.31 cputime=212.951 memavail=1634424 print_time=4012.035 buffer_time=2.024 print_stall=10 extruder: target=215 temp=215.0 pwm=0.445
Stats 4002.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3261589 bytes_read=1575228 bytes_retransmit=9 bytes_invalid=0 send_seq=87778 receive_seq=87777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=687498 sysload=0.31 cputime=213.006 memavail=1634420 print_time=4013.867 buffer_time=2.855 print_stall=10 extruder: target=215 temp=215.0 pwm=0.446
Stats 4003.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3262186 bytes_read=1575610 bytes_retransmit=9 bytes_invalid=0 send_seq=87796 receive_seq=87796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=687561 sysload=0.28 cputime=213.062 memavail=1634428 print_time=4014.762 buffer_time=2.748 print_stall=10 extruder: target=215 temp=214.9 pwm=0.513
Stats 4004.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3262902 bytes_read=1576022 bytes_retransmit=9 bytes_invalid=0 send_seq=87816 receive_seq=87815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=687627 sysload=0.28 cputime=213.116 memavail=1634436 print_time=4015.641 buffer_time=2.625 print_stall=10 extruder: target=215 temp=214.9 pwm=0.536
Stats 4005.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3263584 bytes_read=1576433 bytes_retransmit=9 bytes_invalid=0 send_seq=87838 receive_seq=87837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=687691 sysload=0.28 cputime=213.170 memavail=1634428 print_time=4016.505 buffer_time=2.488 print_stall=10 extruder: target=215 temp=215.0 pwm=0.465
Stats 4006.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3264247 bytes_read=1576845 bytes_retransmit=9 bytes_invalid=0 send_seq=87859 receive_seq=87859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.472 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=687756 sysload=0.28 cputime=213.208 memavail=1634740 print_time=4017.353 buffer_time=2.335 print_stall=10 extruder: target=215 temp=215.0 pwm=0.426
Stats 4007.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3264929 bytes_read=1577272 bytes_retransmit=9 bytes_invalid=0 send_seq=87881 receive_seq=87881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=687851 sysload=0.28 cputime=213.257 memavail=1634748 print_time=4018.196 buffer_time=2.178 print_stall=10 extruder: target=215 temp=214.7 pwm=0.651
Stats 4008.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3266032 bytes_read=1577708 bytes_retransmit=9 bytes_invalid=0 send_seq=87909 receive_seq=87908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.492 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=687981 sysload=0.26 cputime=213.314 memavail=1634764 print_time=4019.786 buffer_time=2.767 print_stall=10 extruder: target=215 temp=215.0 pwm=0.427
Stats 4009.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3266676 bytes_read=1578090 bytes_retransmit=9 bytes_invalid=0 send_seq=87928 receive_seq=87927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=688047 sysload=0.26 cputime=213.367 memavail=1634728 print_time=4020.552 buffer_time=2.532 print_stall=10 extruder: target=215 temp=214.8 pwm=0.577
Stats 4010.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3267321 bytes_read=1578507 bytes_retransmit=9 bytes_invalid=0 send_seq=87948 receive_seq=87947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=688141 sysload=0.26 cputime=213.420 memavail=1634244 print_time=4021.296 buffer_time=2.274 print_stall=10 extruder: target=215 temp=214.9 pwm=0.452
Stats 4011.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3268311 bytes_read=1578953 bytes_retransmit=9 bytes_invalid=0 send_seq=87974 receive_seq=87973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.8 pwm=0.757 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=688304 sysload=0.26 cputime=213.477 memavail=1634500 print_time=4022.725 buffer_time=2.699 print_stall=10 extruder: target=215 temp=214.9 pwm=0.504
Stats 4012.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3269022 bytes_read=1579345 bytes_retransmit=9 bytes_invalid=0 send_seq=87995 receive_seq=87994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=688369 sysload=0.26 cputime=213.531 memavail=1634256 print_time=4023.363 buffer_time=2.336 print_stall=10 extruder: target=215 temp=214.9 pwm=0.449
Stats 4013.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3270077 bytes_read=1579797 bytes_retransmit=9 bytes_invalid=0 send_seq=88022 receive_seq=88021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.064 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=688531 sysload=0.24 cputime=213.589 memavail=1633972 print_time=4024.574 buffer_time=2.547 print_stall=10 extruder: target=215 temp=215.2 pwm=0.300
Stats 4014.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3270634 bytes_read=1580193 bytes_retransmit=9 bytes_invalid=0 send_seq=88040 receive_seq=88040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=688597 sysload=0.24 cputime=213.640 memavail=1634004 print_time=4025.120 buffer_time=2.093 print_stall=10 extruder: target=215 temp=215.0 pwm=0.435
Stats 4015.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3271685 bytes_read=1580610 bytes_retransmit=9 bytes_invalid=0 send_seq=88066 receive_seq=88066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=688761 sysload=0.24 cputime=213.694 memavail=1634004 print_time=4026.064 buffer_time=2.036 print_stall=10 extruder: target=215 temp=215.1 pwm=0.399
Stats 4016.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3273019 bytes_read=1581097 bytes_retransmit=9 bytes_invalid=0 send_seq=88097 receive_seq=88097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.480 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=689185 sysload=0.24 cputime=213.749 memavail=1633440 print_time=4027.029 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 4017.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3274367 bytes_read=1581533 bytes_retransmit=9 bytes_invalid=0 send_seq=88125 receive_seq=88124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=689503 sysload=0.24 cputime=213.809 memavail=1633692 print_time=4028.160 buffer_time=2.129 print_stall=10 extruder: target=215 temp=215.0 pwm=0.514
Stats 4018.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3275017 bytes_read=1581905 bytes_retransmit=9 bytes_invalid=0 send_seq=88142 receive_seq=88141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=689817 sysload=0.22 cputime=213.867 memavail=1633440 print_time=4029.172 buffer_time=2.139 print_stall=10 extruder: target=215 temp=214.9 pwm=0.523
Stats 4019.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3275694 bytes_read=1582327 bytes_retransmit=9 bytes_invalid=0 send_seq=88163 receive_seq=88162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=690138 sysload=0.22 cputime=213.928 memavail=1633700 print_time=4030.184 buffer_time=2.150 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 4020.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3276367 bytes_read=1582744 bytes_retransmit=9 bytes_invalid=0 send_seq=88183 receive_seq=88183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=690462 sysload=0.22 cputime=213.987 memavail=1634012 print_time=4031.196 buffer_time=2.161 print_stall=10 extruder: target=215 temp=215.1 pwm=0.439
Stats 4021.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3277217 bytes_read=1583146 bytes_retransmit=9 bytes_invalid=0 send_seq=88204 receive_seq=88203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=690784 sysload=0.22 cputime=214.046 memavail=1633760 print_time=4032.251 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.2 pwm=0.388
Stats 4022.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3277816 bytes_read=1583563 bytes_retransmit=9 bytes_invalid=0 send_seq=88223 receive_seq=88223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=691035 sysload=0.22 cputime=214.105 memavail=1633784 print_time=4033.162 buffer_time=2.125 print_stall=10 extruder: target=215 temp=215.1 pwm=0.511
Stats 4023.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3278504 bytes_read=1583954 bytes_retransmit=9 bytes_invalid=0 send_seq=88242 receive_seq=88241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=691321 sysload=0.20 cputime=214.165 memavail=1633732 print_time=4034.202 buffer_time=2.164 print_stall=10 extruder: target=215 temp=215.1 pwm=0.438
Stats 4024.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3279094 bytes_read=1584331 bytes_retransmit=9 bytes_invalid=0 send_seq=88260 receive_seq=88259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.8 pwm=0.706 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=691612 sysload=0.20 cputime=214.223 memavail=1633764 print_time=4035.112 buffer_time=2.073 print_stall=10 extruder: target=215 temp=215.1 pwm=0.438
Stats 4025.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3279821 bytes_read=1584753 bytes_retransmit=9 bytes_invalid=0 send_seq=88281 receive_seq=88280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=691933 sysload=0.20 cputime=214.283 memavail=1633520 print_time=4036.153 buffer_time=2.111 print_stall=10 extruder: target=215 temp=215.1 pwm=0.522
Stats 4026.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3280528 bytes_read=1585169 bytes_retransmit=9 bytes_invalid=0 send_seq=88301 receive_seq=88300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=692224 sysload=0.20 cputime=214.344 memavail=1634024 print_time=4037.063 buffer_time=2.020 print_stall=10 extruder: target=215 temp=215.2 pwm=0.431
Stats 4027.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3281136 bytes_read=1585551 bytes_retransmit=9 bytes_invalid=0 send_seq=88319 receive_seq=88319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=692475 sysload=0.20 cputime=214.400 memavail=1634280 print_time=4038.309 buffer_time=2.266 print_stall=10 extruder: target=215 temp=215.3 pwm=0.382
Stats 4028.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3281750 bytes_read=1585958 bytes_retransmit=9 bytes_invalid=0 send_seq=88338 receive_seq=88337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=692666 sysload=0.27 cputime=214.456 memavail=1634484 print_time=4039.199 buffer_time=2.155 print_stall=10 extruder: target=215 temp=215.2 pwm=0.445
Stats 4029.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3282286 bytes_read=1586359 bytes_retransmit=9 bytes_invalid=0 send_seq=88357 receive_seq=88357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=692922 sysload=0.27 cputime=214.511 memavail=1634528 print_time=4040.266 buffer_time=2.222 print_stall=10 extruder: target=215 temp=215.1 pwm=0.491
Stats 4030.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3282973 bytes_read=1586746 bytes_retransmit=9 bytes_invalid=0 send_seq=88378 receive_seq=88377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=693181 sysload=0.27 cputime=214.568 memavail=1634776 print_time=4041.512 buffer_time=2.464 print_stall=10 extruder: target=215 temp=215.3 pwm=0.325
Stats 4031.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3283544 bytes_read=1587183 bytes_retransmit=9 bytes_invalid=0 send_seq=88399 receive_seq=88398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=693377 sysload=0.27 cputime=214.622 memavail=1634536 print_time=4042.402 buffer_time=2.354 print_stall=10 extruder: target=215 temp=215.1 pwm=0.453
Stats 4032.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3284057 bytes_read=1587574 bytes_retransmit=9 bytes_invalid=0 send_seq=88417 receive_seq=88416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=693608 sysload=0.27 cputime=214.679 memavail=1634536 print_time=4043.156 buffer_time=2.107 print_stall=10 extruder: target=215 temp=215.1 pwm=0.394
Stats 4033.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3285188 bytes_read=1587996 bytes_retransmit=9 bytes_invalid=0 send_seq=88444 receive_seq=88443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.482 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=693772 sysload=0.24 cputime=214.733 memavail=1634284 print_time=4044.074 buffer_time=2.022 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 4034.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3286269 bytes_read=1588458 bytes_retransmit=9 bytes_invalid=0 send_seq=88473 receive_seq=88472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=693904 sysload=0.24 cputime=214.789 memavail=1634536 print_time=4045.110 buffer_time=2.057 print_stall=10 extruder: target=215 temp=215.0 pwm=0.529
Stats 4035.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3287371 bytes_read=1588899 bytes_retransmit=9 bytes_invalid=0 send_seq=88501 receive_seq=88500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.443 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=694067 sysload=0.24 cputime=214.847 memavail=1634788 print_time=4046.324 buffer_time=2.269 print_stall=10 extruder: target=215 temp=214.9 pwm=0.566
Stats 4036.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3288416 bytes_read=1589331 bytes_retransmit=9 bytes_invalid=0 send_seq=88527 receive_seq=88526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=694197 sysload=0.24 cputime=214.904 memavail=1634552 print_time=4047.668 buffer_time=2.612 print_stall=10 extruder: target=215 temp=215.0 pwm=0.452
Stats 4037.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3289033 bytes_read=1589748 bytes_retransmit=9 bytes_invalid=0 send_seq=88547 receive_seq=88546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=694292 sysload=0.24 cputime=214.959 memavail=1634552 print_time=4048.396 buffer_time=2.340 print_stall=10 extruder: target=215 temp=215.0 pwm=0.452
Stats 4038.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3289702 bytes_read=1590164 bytes_retransmit=9 bytes_invalid=0 send_seq=88569 receive_seq=88569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=694354 sysload=0.22 cputime=215.011 memavail=1634316 print_time=4049.136 buffer_time=2.079 print_stall=10 extruder: target=215 temp=214.9 pwm=0.524
Stats 4039.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3290773 bytes_read=1590576 bytes_retransmit=9 bytes_invalid=0 send_seq=88595 receive_seq=88594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=694483 sysload=0.22 cputime=215.068 memavail=1634268 print_time=4050.689 buffer_time=2.630 print_stall=10 extruder: target=215 temp=215.1 pwm=0.406
Stats 4040.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3291411 bytes_read=1590998 bytes_retransmit=9 bytes_invalid=0 send_seq=88616 receive_seq=88615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.306 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=694582 sysload=0.22 cputime=215.123 memavail=1633992 print_time=4051.500 buffer_time=2.439 print_stall=10 extruder: target=215 temp=215.1 pwm=0.405
Stats 4041.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3292010 bytes_read=1591414 bytes_retransmit=9 bytes_invalid=0 send_seq=88635 receive_seq=88635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=694646 sysload=0.22 cputime=215.175 memavail=1634060 print_time=4052.331 buffer_time=2.269 print_stall=10 extruder: target=215 temp=215.0 pwm=0.518
Stats 4042.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3292647 bytes_read=1591801 bytes_retransmit=9 bytes_invalid=0 send_seq=88655 receive_seq=88655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.453 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=694712 sysload=0.22 cputime=215.226 memavail=1634312 print_time=4053.177 buffer_time=2.114 print_stall=10 extruder: target=215 temp=215.0 pwm=0.458
Stats 4043.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3293814 bytes_read=1592258 bytes_retransmit=9 bytes_invalid=0 send_seq=88684 receive_seq=88683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.193 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=694839 sysload=0.21 cputime=215.286 memavail=1634060 print_time=4054.916 buffer_time=2.851 print_stall=10 extruder: target=215 temp=214.9 pwm=0.578
Stats 4044.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3294482 bytes_read=1592654 bytes_retransmit=9 bytes_invalid=0 send_seq=88703 receive_seq=88702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=694902 sysload=0.21 cputime=215.338 memavail=1634060 print_time=4055.809 buffer_time=2.743 print_stall=10 extruder: target=215 temp=215.2 pwm=0.377
Stats 4045.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3295084 bytes_read=1593031 bytes_retransmit=9 bytes_invalid=0 send_seq=88720 receive_seq=88720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=694968 sysload=0.21 cputime=215.374 memavail=1634068 print_time=4056.719 buffer_time=2.652 print_stall=10 extruder: target=215 temp=215.1 pwm=0.523
Stats 4046.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3295811 bytes_read=1593477 bytes_retransmit=9 bytes_invalid=0 send_seq=88741 receive_seq=88740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.135 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=695032 sysload=0.21 cputime=215.425 memavail=1633564 print_time=4057.637 buffer_time=2.567 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 4047.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3296501 bytes_read=1593859 bytes_retransmit=9 bytes_invalid=0 send_seq=88762 receive_seq=88761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.548 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=695097 sysload=0.21 cputime=215.477 memavail=1633316 print_time=4058.565 buffer_time=2.494 print_stall=10 extruder: target=215 temp=215.1 pwm=0.382
Stats 4048.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3297202 bytes_read=1594241 bytes_retransmit=9 bytes_invalid=0 send_seq=88783 receive_seq=88782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=695160 sysload=0.19 cputime=215.531 memavail=1633324 print_time=4059.503 buffer_time=2.430 print_stall=10 extruder: target=215 temp=215.0 pwm=0.452
Stats 4049.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3297859 bytes_read=1594664 bytes_retransmit=9 bytes_invalid=0 send_seq=88803 receive_seq=88803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=695225 sysload=0.19 cputime=215.574 memavail=1633324 print_time=4060.450 buffer_time=2.377 print_stall=10 extruder: target=215 temp=214.9 pwm=0.515
Stats 4050.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3298521 bytes_read=1595044 bytes_retransmit=9 bytes_invalid=0 send_seq=88823 receive_seq=88823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=695257 sysload=0.19 cputime=215.621 memavail=1633324 print_time=4061.159 buffer_time=2.084 print_stall=10 extruder: target=215 temp=214.8 pwm=0.535
Stats 4051.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3299244 bytes_read=1595451 bytes_retransmit=9 bytes_invalid=0 send_seq=88844 receive_seq=88844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=695353 sysload=0.19 cputime=215.675 memavail=1633584 print_time=4062.115 buffer_time=2.039 print_stall=10 extruder: target=215 temp=214.9 pwm=0.508
Stats 4052.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3299962 bytes_read=1595887 bytes_retransmit=9 bytes_invalid=0 send_seq=88865 receive_seq=88865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=695450 sysload=0.19 cputime=215.733 memavail=1633532 print_time=4063.343 buffer_time=2.266 print_stall=10 extruder: target=215 temp=215.0 pwm=0.420
Stats 4053.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3300647 bytes_read=1596274 bytes_retransmit=9 bytes_invalid=0 send_seq=88885 receive_seq=88885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.615 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=695516 sysload=0.17 cputime=215.785 memavail=1633784 print_time=4064.319 buffer_time=2.241 print_stall=10 extruder: target=215 temp=215.1 pwm=0.384
Stats 4054.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3301352 bytes_read=1596676 bytes_retransmit=9 bytes_invalid=0 send_seq=88905 receive_seq=88905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=695580 sysload=0.17 cputime=215.840 memavail=1633784 print_time=4065.298 buffer_time=2.219 print_stall=10 extruder: target=215 temp=214.8 pwm=0.571
Stats 4055.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3302024 bytes_read=1597097 bytes_retransmit=9 bytes_invalid=0 send_seq=88926 receive_seq=88926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.204 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=695645 sysload=0.17 cputime=215.895 memavail=1634032 print_time=4066.283 buffer_time=2.204 print_stall=10 extruder: target=215 temp=214.9 pwm=0.432
Stats 4056.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3302721 bytes_read=1597504 bytes_retransmit=9 bytes_invalid=0 send_seq=88947 receive_seq=88947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=695739 sysload=0.17 cputime=215.947 memavail=1634288 print_time=4067.273 buffer_time=2.193 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 4057.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3303364 bytes_read=1597896 bytes_retransmit=9 bytes_invalid=0 send_seq=88965 receive_seq=88965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=695805 sysload=0.17 cputime=216.000 memavail=1634292 print_time=4068.265 buffer_time=2.181 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 4058.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3304001 bytes_read=1598302 bytes_retransmit=9 bytes_invalid=0 send_seq=88983 receive_seq=88983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.146 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=695869 sysload=0.16 cputime=216.051 memavail=1633796 print_time=4069.258 buffer_time=2.174 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 4059.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3304698 bytes_read=1598689 bytes_retransmit=9 bytes_invalid=0 send_seq=89003 receive_seq=89003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=695934 sysload=0.16 cputime=216.101 memavail=1633800 print_time=4070.251 buffer_time=2.162 print_stall=10 extruder: target=215 temp=214.9 pwm=0.442
Stats 4060.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3305389 bytes_read=1599096 bytes_retransmit=9 bytes_invalid=0 send_seq=89024 receive_seq=89024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.073 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=695997 sysload=0.16 cputime=216.155 memavail=1633552 print_time=4071.244 buffer_time=2.154 print_stall=10 extruder: target=215 temp=215.0 pwm=0.442
Stats 4061.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3306071 bytes_read=1599527 bytes_retransmit=9 bytes_invalid=0 send_seq=89044 receive_seq=89044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=696062 sysload=0.16 cputime=216.207 memavail=1633552 print_time=4072.236 buffer_time=2.146 print_stall=10 extruder: target=215 temp=214.8 pwm=0.527
Stats 4062.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3306730 bytes_read=1599909 bytes_retransmit=9 bytes_invalid=0 send_seq=89063 receive_seq=89063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.170 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=696157 sysload=0.16 cputime=216.260 memavail=1633828 print_time=4073.229 buffer_time=2.139 print_stall=10 extruder: target=215 temp=214.9 pwm=0.428
Stats 4063.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3307441 bytes_read=1600321 bytes_retransmit=9 bytes_invalid=0 send_seq=89085 receive_seq=89085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.582 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=696223 sysload=0.15 cputime=216.316 memavail=1634056 print_time=4074.220 buffer_time=2.129 print_stall=10 extruder: target=215 temp=214.8 pwm=0.530
Stats 4064.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3308149 bytes_read=1600747 bytes_retransmit=9 bytes_invalid=0 send_seq=89107 receive_seq=89107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=696287 sysload=0.15 cputime=216.371 memavail=1633568 print_time=4075.208 buffer_time=2.116 print_stall=10 extruder: target=215 temp=214.8 pwm=0.535
Stats 4065.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3308854 bytes_read=1601134 bytes_retransmit=9 bytes_invalid=0 send_seq=89127 receive_seq=89127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=696353 sysload=0.15 cputime=216.422 memavail=1633544 print_time=4076.190 buffer_time=2.095 print_stall=10 extruder: target=215 temp=214.9 pwm=0.430
Stats 4066.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3309535 bytes_read=1601551 bytes_retransmit=9 bytes_invalid=0 send_seq=89147 receive_seq=89147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=696417 sysload=0.15 cputime=216.473 memavail=1634188 print_time=4077.168 buffer_time=2.072 print_stall=10 extruder: target=215 temp=214.9 pwm=0.519
Stats 4067.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3310196 bytes_read=1601967 bytes_retransmit=9 bytes_invalid=0 send_seq=89167 receive_seq=89167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=696482 sysload=0.15 cputime=216.525 memavail=1634440 print_time=4078.141 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.0 pwm=0.452
Stats 4068.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3310874 bytes_read=1602349 bytes_retransmit=9 bytes_invalid=0 send_seq=89186 receive_seq=89186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=696575 sysload=0.13 cputime=216.565 memavail=1634440 print_time=4079.109 buffer_time=2.012 print_stall=10 extruder: target=215 temp=215.0 pwm=0.414
Stats 4069.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3312040 bytes_read=1602786 bytes_retransmit=9 bytes_invalid=0 send_seq=89214 receive_seq=89213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.086 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=696672 sysload=0.13 cputime=216.618 memavail=1634440 print_time=4080.777 buffer_time=2.676 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 4070.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3312748 bytes_read=1603217 bytes_retransmit=9 bytes_invalid=0 send_seq=89236 receive_seq=89236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.184 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=696770 sysload=0.13 cputime=216.677 memavail=1634448 print_time=4081.966 buffer_time=2.863 print_stall=10 extruder: target=215 temp=215.0 pwm=0.428
Stats 4071.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3313487 bytes_read=1603624 bytes_retransmit=9 bytes_invalid=0 send_seq=89258 receive_seq=89257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=696833 sysload=0.13 cputime=216.730 memavail=1634452 print_time=4082.899 buffer_time=2.795 print_stall=10 extruder: target=215 temp=215.0 pwm=0.413
Stats 4072.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3314175 bytes_read=1604031 bytes_retransmit=9 bytes_invalid=0 send_seq=89278 receive_seq=89278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.164 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=696897 sysload=0.13 cputime=216.766 memavail=1634452 print_time=4083.823 buffer_time=2.718 print_stall=10 extruder: target=215 temp=214.9 pwm=0.515
Stats 4073.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3314855 bytes_read=1604452 bytes_retransmit=9 bytes_invalid=0 send_seq=89299 receive_seq=89299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=696993 sysload=0.12 cputime=216.815 memavail=1634200 print_time=4084.753 buffer_time=2.648 print_stall=10 extruder: target=215 temp=215.1 pwm=0.446
Stats 4074.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3315539 bytes_read=1604839 bytes_retransmit=9 bytes_invalid=0 send_seq=89319 receive_seq=89319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=697058 sysload=0.12 cputime=216.851 memavail=1634200 print_time=4085.636 buffer_time=2.530 print_stall=10 extruder: target=215 temp=215.0 pwm=0.446
Stats 4075.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3316224 bytes_read=1605251 bytes_retransmit=9 bytes_invalid=0 send_seq=89339 receive_seq=89338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=697122 sysload=0.12 cputime=216.899 memavail=1633696 print_time=4086.522 buffer_time=2.414 print_stall=10 extruder: target=215 temp=215.0 pwm=0.512
Stats 4076.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3316880 bytes_read=1605682 bytes_retransmit=9 bytes_invalid=0 send_seq=89361 receive_seq=89361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.489 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=697188 sysload=0.12 cputime=216.945 memavail=1634208 print_time=4087.392 buffer_time=2.284 print_stall=10 extruder: target=215 temp=214.9 pwm=0.516
Stats 4077.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3317563 bytes_read=1606069 bytes_retransmit=9 bytes_invalid=0 send_seq=89381 receive_seq=89381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=697251 sysload=0.12 cputime=216.988 memavail=1634208 print_time=4088.246 buffer_time=2.137 print_stall=10 extruder: target=215 temp=215.0 pwm=0.421
Stats 4078.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3318711 bytes_read=1606547 bytes_retransmit=9 bytes_invalid=0 send_seq=89411 receive_seq=89411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=697412 sysload=0.11 cputime=217.033 memavail=1634460 print_time=4089.905 buffer_time=2.796 print_stall=10 extruder: target=215 temp=214.9 pwm=0.488
Stats 4079.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3319383 bytes_read=1606948 bytes_retransmit=9 bytes_invalid=0 send_seq=89432 receive_seq=89431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=697476 sysload=0.11 cputime=217.081 memavail=1634712 print_time=4090.705 buffer_time=2.593 print_stall=10 extruder: target=215 temp=214.9 pwm=0.485
Stats 4080.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3320248 bytes_read=1607355 bytes_retransmit=9 bytes_invalid=0 send_seq=89456 receive_seq=89455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=697540 sysload=0.11 cputime=217.138 memavail=1634192 print_time=4091.483 buffer_time=2.364 print_stall=10 extruder: target=215 temp=215.0 pwm=0.475
Stats 4081.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000066 bytes_write=3320863 bytes_read=1607787 bytes_retransmit=9 bytes_invalid=0 send_seq=89475 receive_seq=89475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=697639 sysload=0.11 cputime=217.192 memavail=1634220 print_time=4092.255 buffer_time=2.137 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
Stats 4082.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000066 bytes_write=3321925 bytes_read=1608228 bytes_retransmit=9 bytes_invalid=0 send_seq=89503 receive_seq=89503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.574 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=697795 sysload=0.11 cputime=217.252 memavail=1634220 print_time=4093.672 buffer_time=2.552 print_stall=10 extruder: target=215 temp=214.9 pwm=0.490
Stats 4083.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000066 bytes_write=3322544 bytes_read=1608610 bytes_retransmit=9 bytes_invalid=0 send_seq=89522 receive_seq=89522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=697858 sysload=0.10 cputime=217.303 memavail=1634472 print_time=4094.345 buffer_time=2.225 print_stall=10 extruder: target=215 temp=215.0 pwm=0.401
Stats 4084.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000066 bytes_write=3323691 bytes_read=1609072 bytes_retransmit=9 bytes_invalid=0 send_seq=89551 receive_seq=89551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=57.5 mcu_temp: temp=41.6 sd_pos=698018 sysload=0.10 cputime=217.364 memavail=1634480 print_time=4095.612 buffer_time=2.491 print_stall=10 extruder: target=215 temp=214.8 pwm=0.581
Stats 4085.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000066 bytes_write=3324285 bytes_read=1609468 bytes_retransmit=9 bytes_invalid=0 send_seq=89570 receive_seq=89570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=698081 sysload=0.10 cputime=217.402 memavail=1634488 print_time=4096.161 buffer_time=2.040 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 4086.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3325350 bytes_read=1609910 bytes_retransmit=9 bytes_invalid=0 send_seq=89598 receive_seq=89598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=698239 sysload=0.10 cputime=217.445 memavail=1634988 print_time=4097.181 buffer_time=2.059 print_stall=10 extruder: target=215 temp=215.1 pwm=0.384
Stats 4087.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3326663 bytes_read=1610372 bytes_retransmit=9 bytes_invalid=0 send_seq=89628 receive_seq=89627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.433 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=698437 sysload=0.10 cputime=217.498 memavail=1635300 print_time=4098.230 buffer_time=2.105 print_stall=10 extruder: target=215 temp=215.0 pwm=0.477
Stats 4088.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3328441 bytes_read=1610873 bytes_retransmit=9 bytes_invalid=0 send_seq=89667 receive_seq=89667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=698888 sysload=0.10 cputime=217.561 memavail=1634804 print_time=4099.300 buffer_time=2.175 print_stall=10 extruder: target=215 temp=214.9 pwm=0.529
Stats 4089.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3329197 bytes_read=1611260 bytes_retransmit=9 bytes_invalid=0 send_seq=89687 receive_seq=89687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=699140 sysload=0.10 cputime=217.619 memavail=1634552 print_time=4100.309 buffer_time=2.181 print_stall=10 extruder: target=215 temp=215.0 pwm=0.419
Stats 4090.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3329866 bytes_read=1611662 bytes_retransmit=9 bytes_invalid=0 send_seq=89704 receive_seq=89704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.018 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=699396 sysload=0.10 cputime=217.667 memavail=1634516 print_time=4101.317 buffer_time=2.189 print_stall=10 extruder: target=215 temp=215.0 pwm=0.488
Stats 4091.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3330576 bytes_read=1612078 bytes_retransmit=9 bytes_invalid=0 send_seq=89725 receive_seq=89724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=699657 sysload=0.10 cputime=217.720 memavail=1634844 print_time=4102.326 buffer_time=2.196 print_stall=10 extruder: target=215 temp=215.0 pwm=0.479
Stats 4092.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3331246 bytes_read=1612445 bytes_retransmit=9 bytes_invalid=0 send_seq=89741 receive_seq=89740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=699916 sysload=0.10 cputime=217.781 memavail=1634804 print_time=4103.334 buffer_time=2.201 print_stall=10 extruder: target=215 temp=215.1 pwm=0.479
Stats 4093.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3331920 bytes_read=1612862 bytes_retransmit=9 bytes_invalid=0 send_seq=89761 receive_seq=89760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=700143 sysload=0.09 cputime=217.841 memavail=1634700 print_time=4104.134 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.1 pwm=0.417
Stats 4094.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3332592 bytes_read=1613273 bytes_retransmit=9 bytes_invalid=0 send_seq=89782 receive_seq=89782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=700395 sysload=0.09 cputime=217.900 memavail=1634440 print_time=4105.172 buffer_time=2.036 print_stall=10 extruder: target=215 temp=215.2 pwm=0.410
Stats 4095.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3333264 bytes_read=1613655 bytes_retransmit=9 bytes_invalid=0 send_seq=89801 receive_seq=89801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.572 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=700649 sysload=0.09 cputime=217.956 memavail=1634440 print_time=4106.209 buffer_time=2.071 print_stall=10 extruder: target=215 temp=215.0 pwm=0.561
Stats 4096.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3333920 bytes_read=1614082 bytes_retransmit=9 bytes_invalid=0 send_seq=89820 receive_seq=89820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=700907 sysload=0.09 cputime=218.018 memavail=1634184 print_time=4107.246 buffer_time=2.107 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 4097.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3334571 bytes_read=1614468 bytes_retransmit=9 bytes_invalid=0 send_seq=89837 receive_seq=89837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=701170 sysload=0.09 cputime=218.066 memavail=1634692 print_time=4108.283 buffer_time=2.144 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 4098.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3335258 bytes_read=1614850 bytes_retransmit=9 bytes_invalid=0 send_seq=89856 receive_seq=89856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=701430 sysload=0.08 cputime=218.116 memavail=1634188 print_time=4109.286 buffer_time=2.145 print_stall=10 extruder: target=215 temp=215.2 pwm=0.427
Stats 4099.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3335896 bytes_read=1615257 bytes_retransmit=9 bytes_invalid=0 send_seq=89875 receive_seq=89874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.447 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=701618 sysload=0.08 cputime=218.172 memavail=1634448 print_time=4110.350 buffer_time=2.209 print_stall=10 extruder: target=215 temp=215.2 pwm=0.427
Stats 4100.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3336516 bytes_read=1615653 bytes_retransmit=9 bytes_invalid=0 send_seq=89894 receive_seq=89893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.8 sd_pos=701810 sysload=0.08 cputime=218.230 memavail=1634448 print_time=4111.415 buffer_time=2.272 print_stall=10 extruder: target=215 temp=215.2 pwm=0.387
Stats 4101.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3336989 bytes_read=1616045 bytes_retransmit=9 bytes_invalid=0 send_seq=89911 receive_seq=89911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.041 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=702004 sysload=0.08 cputime=218.287 memavail=1634196 print_time=4112.479 buffer_time=2.334 print_stall=10 extruder: target=215 temp=215.3 pwm=0.429
Stats 4102.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3337508 bytes_read=1616452 bytes_retransmit=9 bytes_invalid=0 send_seq=89929 receive_seq=89929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=702131 sysload=0.08 cputime=218.346 memavail=1633940 print_time=4113.189 buffer_time=2.042 print_stall=10 extruder: target=215 temp=215.2 pwm=0.415
Stats 4103.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3338171 bytes_read=1616843 bytes_retransmit=9 bytes_invalid=0 send_seq=89948 receive_seq=89947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.518 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=702329 sysload=0.07 cputime=218.405 memavail=1634192 print_time=4114.254 buffer_time=2.105 print_stall=10 extruder: target=215 temp=215.3 pwm=0.368
Stats 4104.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3339027 bytes_read=1617250 bytes_retransmit=9 bytes_invalid=0 send_seq=89971 receive_seq=89971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=702628 sysload=0.07 cputime=218.466 memavail=1633888 print_time=4115.325 buffer_time=2.175 print_stall=10 extruder: target=215 temp=215.1 pwm=0.535
Stats 4105.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=3340359 bytes_read=1617717 bytes_retransmit=9 bytes_invalid=0 send_seq=90001 receive_seq=90001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.497 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=702850 sysload=0.07 cputime=218.527 memavail=1633888 print_time=4116.546 buffer_time=2.396 print_stall=10 extruder: target=215 temp=215.2 pwm=0.447
Stats 4106.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3341484 bytes_read=1618165 bytes_retransmit=9 bytes_invalid=0 send_seq=90029 receive_seq=90028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=703006 sysload=0.07 cputime=218.589 memavail=1633576 print_time=4117.615 buffer_time=2.462 print_stall=10 extruder: target=215 temp=215.1 pwm=0.505
Stats 4107.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3342090 bytes_read=1618547 bytes_retransmit=9 bytes_invalid=0 send_seq=90049 receive_seq=90049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.043 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=703068 sysload=0.07 cputime=218.643 memavail=1633828 print_time=4118.218 buffer_time=2.064 print_stall=10 extruder: target=215 temp=215.2 pwm=0.420
Stats 4108.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3343104 bytes_read=1618982 bytes_retransmit=9 bytes_invalid=0 send_seq=90075 receive_seq=90075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=703196 sysload=0.07 cputime=218.705 memavail=1633824 print_time=4119.514 buffer_time=2.359 print_stall=10 extruder: target=215 temp=215.1 pwm=0.495
Stats 4109.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3343796 bytes_read=1619382 bytes_retransmit=9 bytes_invalid=0 send_seq=90097 receive_seq=90097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=703291 sysload=0.07 cputime=218.759 memavail=1634072 print_time=4120.211 buffer_time=2.055 print_stall=10 extruder: target=215 temp=215.2 pwm=0.378
Stats 4110.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3344874 bytes_read=1619795 bytes_retransmit=9 bytes_invalid=0 send_seq=90124 receive_seq=90123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=703420 sysload=0.07 cputime=218.820 memavail=1634088 print_time=4121.685 buffer_time=2.527 print_stall=10 extruder: target=215 temp=215.0 pwm=0.465
Stats 4111.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3345513 bytes_read=1620232 bytes_retransmit=9 bytes_invalid=0 send_seq=90145 receive_seq=90144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=703484 sysload=0.07 cputime=218.877 memavail=1634084 print_time=4122.456 buffer_time=2.297 print_stall=10 extruder: target=215 temp=215.1 pwm=0.465
Stats 4112.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3346115 bytes_read=1620633 bytes_retransmit=9 bytes_invalid=0 send_seq=90164 receive_seq=90164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=703549 sysload=0.07 cputime=218.933 memavail=1634084 print_time=4123.249 buffer_time=2.089 print_stall=10 extruder: target=215 temp=215.0 pwm=0.465
Stats 4113.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3347197 bytes_read=1621055 bytes_retransmit=9 bytes_invalid=0 send_seq=90192 receive_seq=90191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=703709 sysload=0.06 cputime=218.997 memavail=1634084 print_time=4124.898 buffer_time=2.736 print_stall=10 extruder: target=215 temp=215.1 pwm=0.413
Stats 4114.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3347804 bytes_read=1621477 bytes_retransmit=9 bytes_invalid=0 send_seq=90212 receive_seq=90212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=703773 sysload=0.06 cputime=219.046 memavail=1634300 print_time=4125.747 buffer_time=2.585 print_stall=10 extruder: target=215 temp=215.1 pwm=0.388
Stats 4115.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3348472 bytes_read=1621878 bytes_retransmit=9 bytes_invalid=0 send_seq=90232 receive_seq=90232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=703836 sysload=0.06 cputime=219.094 memavail=1634092 print_time=4126.612 buffer_time=2.448 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 4116.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3349208 bytes_read=1622285 bytes_retransmit=9 bytes_invalid=0 send_seq=90253 receive_seq=90253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=703898 sysload=0.06 cputime=219.151 memavail=1633788 print_time=4127.492 buffer_time=2.328 print_stall=10 extruder: target=215 temp=215.1 pwm=0.382
Stats 4117.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3349898 bytes_read=1622717 bytes_retransmit=9 bytes_invalid=0 send_seq=90276 receive_seq=90276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=703997 sysload=0.06 cputime=219.200 memavail=1633792 print_time=4128.388 buffer_time=2.223 print_stall=10 extruder: target=215 temp=215.0 pwm=0.502
Stats 4118.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3350577 bytes_read=1623118 bytes_retransmit=9 bytes_invalid=0 send_seq=90296 receive_seq=90296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=704061 sysload=0.06 cputime=219.257 memavail=1633540 print_time=4129.297 buffer_time=2.129 print_stall=10 extruder: target=215 temp=214.9 pwm=0.526
Stats 4119.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3351258 bytes_read=1623505 bytes_retransmit=9 bytes_invalid=0 send_seq=90316 receive_seq=90316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.467 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=704127 sysload=0.06 cputime=219.318 memavail=1633548 print_time=4130.216 buffer_time=2.048 print_stall=10 extruder: target=215 temp=215.1 pwm=0.376
Stats 4120.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3352411 bytes_read=1623976 bytes_retransmit=9 bytes_invalid=0 send_seq=90345 receive_seq=90344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=704257 sysload=0.06 cputime=219.384 memavail=1633548 print_time=4132.083 buffer_time=2.910 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 4121.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3353059 bytes_read=1624373 bytes_retransmit=9 bytes_invalid=0 send_seq=90364 receive_seq=90363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=704321 sysload=0.06 cputime=219.440 memavail=1633800 print_time=4133.031 buffer_time=2.857 print_stall=10 extruder: target=215 temp=214.9 pwm=0.533
Stats 4122.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3353658 bytes_read=1624780 bytes_retransmit=9 bytes_invalid=0 send_seq=90384 receive_seq=90384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=11 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=704419 sysload=0.06 cputime=219.504 memavail=1633800 print_time=4134.001 buffer_time=2.823 print_stall=10 extruder: target=215 temp=215.0 pwm=0.423
Stats 4123.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3354403 bytes_read=1625196 bytes_retransmit=9 bytes_invalid=0 send_seq=90405 receive_seq=90404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.473 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=704483 sysload=0.05 cputime=219.560 memavail=1633800 print_time=4134.954 buffer_time=2.774 print_stall=10 extruder: target=215 temp=214.9 pwm=0.525
Stats 4124.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3355036 bytes_read=1625573 bytes_retransmit=9 bytes_invalid=0 send_seq=90423 receive_seq=90422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=704549 sysload=0.05 cputime=219.616 memavail=1633800 print_time=4135.923 buffer_time=2.741 print_stall=10 extruder: target=215 temp=215.0 pwm=0.448
Stats 4125.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3355716 bytes_read=1625980 bytes_retransmit=9 bytes_invalid=0 send_seq=90443 receive_seq=90443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=704613 sysload=0.05 cputime=219.667 memavail=1633564 print_time=4136.897 buffer_time=2.714 print_stall=10 extruder: target=215 temp=214.9 pwm=0.481
Stats 4126.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3356367 bytes_read=1626411 bytes_retransmit=9 bytes_invalid=0 send_seq=90463 receive_seq=90463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=704679 sysload=0.05 cputime=219.709 memavail=1633308 print_time=4137.875 buffer_time=2.693 print_stall=10 extruder: target=215 temp=214.9 pwm=0.481
Stats 4127.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3357071 bytes_read=1626798 bytes_retransmit=9 bytes_invalid=0 send_seq=90484 receive_seq=90483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=704742 sysload=0.05 cputime=219.761 memavail=1633808 print_time=4138.859 buffer_time=2.674 print_stall=10 extruder: target=215 temp=214.9 pwm=0.497
Stats 4128.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3357731 bytes_read=1627205 bytes_retransmit=9 bytes_invalid=0 send_seq=90504 receive_seq=90504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=704841 sysload=0.05 cputime=219.813 memavail=1634060 print_time=4139.858 buffer_time=2.673 print_stall=10 extruder: target=215 temp=215.0 pwm=0.435
Stats 4129.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3358398 bytes_read=1627616 bytes_retransmit=9 bytes_invalid=0 send_seq=90524 receive_seq=90523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=704905 sysload=0.05 cputime=219.861 memavail=1633816 print_time=4140.836 buffer_time=2.650 print_stall=10 extruder: target=215 temp=214.9 pwm=0.435
Stats 4130.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3358972 bytes_read=1627993 bytes_retransmit=9 bytes_invalid=0 send_seq=90541 receive_seq=90541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.161 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=704970 sysload=0.05 cputime=219.909 memavail=1633564 print_time=4141.826 buffer_time=2.639 print_stall=10 extruder: target=215 temp=215.0 pwm=0.495
Stats 4131.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3359707 bytes_read=1628410 bytes_retransmit=9 bytes_invalid=0 send_seq=90562 receive_seq=90561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=705033 sysload=0.05 cputime=219.955 memavail=1633816 print_time=4142.816 buffer_time=2.628 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 4132.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3360387 bytes_read=1628831 bytes_retransmit=9 bytes_invalid=0 send_seq=90583 receive_seq=90582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=705099 sysload=0.05 cputime=220.012 memavail=1633872 print_time=4143.805 buffer_time=2.617 print_stall=10 extruder: target=215 temp=215.0 pwm=0.539
Stats 4133.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3361068 bytes_read=1629218 bytes_retransmit=9 bytes_invalid=0 send_seq=90603 receive_seq=90602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.131 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=705163 sysload=0.04 cputime=220.070 memavail=1634128 print_time=4144.795 buffer_time=2.605 print_stall=10 extruder: target=215 temp=215.0 pwm=0.425
Stats 4134.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3361727 bytes_read=1629620 bytes_retransmit=9 bytes_invalid=0 send_seq=90622 receive_seq=90622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.407 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=705262 sysload=0.04 cputime=220.118 memavail=1634136 print_time=4145.797 buffer_time=2.607 print_stall=10 extruder: target=215 temp=214.9 pwm=0.549
Stats 4135.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3362410 bytes_read=1630041 bytes_retransmit=9 bytes_invalid=0 send_seq=90644 receive_seq=90643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=705326 sysload=0.04 cputime=220.171 memavail=1634136 print_time=4146.771 buffer_time=2.577 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 4136.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3363075 bytes_read=1630433 bytes_retransmit=9 bytes_invalid=0 send_seq=90663 receive_seq=90661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=705392 sysload=0.04 cputime=220.229 memavail=1634388 print_time=4147.753 buffer_time=2.558 print_stall=10 extruder: target=215 temp=215.1 pwm=0.395
Stats 4137.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3363788 bytes_read=1630866 bytes_retransmit=9 bytes_invalid=0 send_seq=90685 receive_seq=90685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=705455 sysload=0.04 cputime=220.277 memavail=1634388 print_time=4148.730 buffer_time=2.535 print_stall=10 extruder: target=215 temp=214.9 pwm=0.514
Stats 4138.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3364465 bytes_read=1631287 bytes_retransmit=9 bytes_invalid=0 send_seq=90707 receive_seq=90706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.490 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=705520 sysload=0.04 cputime=220.332 memavail=1634640 print_time=4149.703 buffer_time=2.507 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 4139.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3365088 bytes_read=1631669 bytes_retransmit=9 bytes_invalid=0 send_seq=90725 receive_seq=90725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=705584 sysload=0.04 cputime=220.387 memavail=1634840 print_time=4150.670 buffer_time=2.473 print_stall=10 extruder: target=215 temp=214.8 pwm=0.527
Stats 4140.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000054 bytes_write=3365761 bytes_read=1632066 bytes_retransmit=9 bytes_invalid=0 send_seq=90744 receive_seq=90744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=705682 sysload=0.04 cputime=220.443 memavail=1634340 print_time=4151.646 buffer_time=2.447 print_stall=10 extruder: target=215 temp=215.0 pwm=0.440
Stats 4141.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3366416 bytes_read=1632492 bytes_retransmit=9 bytes_invalid=0 send_seq=90763 receive_seq=90763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=705745 sysload=0.04 cputime=220.497 memavail=1634340 print_time=4152.588 buffer_time=2.387 print_stall=10 extruder: target=215 temp=215.0 pwm=0.440
Stats 4142.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3367092 bytes_read=1632879 bytes_retransmit=9 bytes_invalid=0 send_seq=90783 receive_seq=90783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.532 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=705810 sysload=0.04 cputime=220.557 memavail=1634340 print_time=4153.533 buffer_time=2.331 print_stall=10 extruder: target=215 temp=215.1 pwm=0.393
Stats 4143.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3367778 bytes_read=1633286 bytes_retransmit=9 bytes_invalid=0 send_seq=90804 receive_seq=90804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=705874 sysload=0.04 cputime=220.615 memavail=1634340 print_time=4154.469 buffer_time=2.266 print_stall=10 extruder: target=215 temp=215.1 pwm=0.431
Stats 4144.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3368489 bytes_read=1633717 bytes_retransmit=9 bytes_invalid=0 send_seq=90827 receive_seq=90827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=705940 sysload=0.04 cputime=220.676 memavail=1634340 print_time=4155.394 buffer_time=2.190 print_stall=10 extruder: target=215 temp=215.1 pwm=0.410
Stats 4145.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3369173 bytes_read=1634104 bytes_retransmit=9 bytes_invalid=0 send_seq=90847 receive_seq=90847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=706004 sysload=0.04 cputime=220.729 memavail=1634324 print_time=4156.310 buffer_time=2.105 print_stall=10 extruder: target=215 temp=214.9 pwm=0.550
Stats 4146.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3369844 bytes_read=1634536 bytes_retransmit=9 bytes_invalid=0 send_seq=90867 receive_seq=90867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=706103 sysload=0.04 cputime=220.791 memavail=1634156 print_time=4157.221 buffer_time=2.013 print_stall=10 extruder: target=215 temp=214.9 pwm=0.493
Stats 4147.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3370971 bytes_read=1634967 bytes_retransmit=9 bytes_invalid=0 send_seq=90894 receive_seq=90893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.505 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=706232 sysload=0.04 cputime=220.855 memavail=1634408 print_time=4158.983 buffer_time=2.773 print_stall=10 extruder: target=215 temp=214.8 pwm=0.558
Stats 4148.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3371567 bytes_read=1635349 bytes_retransmit=9 bytes_invalid=0 send_seq=90912 receive_seq=90912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=706295 sysload=0.03 cputime=220.912 memavail=1634412 print_time=4159.843 buffer_time=2.632 print_stall=10 extruder: target=215 temp=214.7 pwm=0.594
Stats 4149.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3372302 bytes_read=1635761 bytes_retransmit=9 bytes_invalid=0 send_seq=90932 receive_seq=90931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=706361 sysload=0.03 cputime=220.962 memavail=1633856 print_time=4160.688 buffer_time=2.475 print_stall=10 extruder: target=215 temp=214.8 pwm=0.543
Stats 4150.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3372964 bytes_read=1636172 bytes_retransmit=9 bytes_invalid=0 send_seq=90953 receive_seq=90953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.050 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=706456 sysload=0.03 cputime=221.014 memavail=1633796 print_time=4161.529 buffer_time=2.313 print_stall=10 extruder: target=215 temp=214.9 pwm=0.456
Stats 4151.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3373617 bytes_read=1636579 bytes_retransmit=9 bytes_invalid=0 send_seq=90974 receive_seq=90974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=706521 sysload=0.03 cputime=221.070 memavail=1634064 print_time=4162.324 buffer_time=2.102 print_stall=10 extruder: target=215 temp=214.8 pwm=0.535
Stats 4152.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3374694 bytes_read=1637021 bytes_retransmit=9 bytes_invalid=0 send_seq=91000 receive_seq=90999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=706650 sysload=0.03 cputime=221.129 memavail=1634064 print_time=4163.874 buffer_time=2.651 print_stall=10 extruder: target=215 temp=214.8 pwm=0.550
Stats 4153.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3375265 bytes_read=1637422 bytes_retransmit=9 bytes_invalid=0 send_seq=91019 receive_seq=91019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.539 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=706744 sysload=0.03 cputime=221.185 memavail=1633828 print_time=4164.615 buffer_time=2.390 print_stall=10 extruder: target=215 temp=214.9 pwm=0.460
Stats 4154.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3375957 bytes_read=1637809 bytes_retransmit=9 bytes_invalid=0 send_seq=91039 receive_seq=91039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=706809 sysload=0.03 cputime=221.240 memavail=1634316 print_time=4165.338 buffer_time=2.109 print_stall=10 extruder: target=215 temp=215.0 pwm=0.463
Stats 4155.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3376957 bytes_read=1638246 bytes_retransmit=9 bytes_invalid=0 send_seq=91063 receive_seq=91063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=706937 sysload=0.03 cputime=221.300 memavail=1634328 print_time=4166.679 buffer_time=2.449 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 4156.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3377617 bytes_read=1638672 bytes_retransmit=9 bytes_invalid=0 send_seq=91085 receive_seq=91085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=707032 sysload=0.03 cputime=221.364 memavail=1634580 print_time=4167.302 buffer_time=2.069 print_stall=10 extruder: target=215 temp=215.1 pwm=0.376
Stats 4157.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3378629 bytes_read=1639089 bytes_retransmit=9 bytes_invalid=0 send_seq=91111 receive_seq=91111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=707164 sysload=0.03 cputime=221.421 memavail=1634952 print_time=4168.432 buffer_time=2.196 print_stall=10 extruder: target=215 temp=214.9 pwm=0.469
Stats 4158.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3379720 bytes_read=1639541 bytes_retransmit=9 bytes_invalid=0 send_seq=91139 receive_seq=91138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=707328 sysload=0.03 cputime=221.481 memavail=1634952 print_time=4169.374 buffer_time=2.135 print_stall=10 extruder: target=215 temp=215.0 pwm=0.418
Stats 4159.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3381097 bytes_read=1640002 bytes_retransmit=9 bytes_invalid=0 send_seq=91171 receive_seq=91170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=707752 sysload=0.03 cputime=221.539 memavail=1634708 print_time=4170.336 buffer_time=2.094 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 4160.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3382430 bytes_read=1640434 bytes_retransmit=9 bytes_invalid=0 send_seq=91200 receive_seq=91199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.162 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=708100 sysload=0.03 cputime=221.599 memavail=1634708 print_time=4171.580 buffer_time=2.334 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 4161.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3383062 bytes_read=1640856 bytes_retransmit=9 bytes_invalid=0 send_seq=91217 receive_seq=91217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=708412 sysload=0.03 cputime=221.658 memavail=1634708 print_time=4172.465 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.0 pwm=0.440
Stats 4162.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3383610 bytes_read=1641252 bytes_retransmit=9 bytes_invalid=0 send_seq=91236 receive_seq=91236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.097 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=708633 sysload=0.03 cputime=221.715 memavail=1634456 print_time=4173.338 buffer_time=2.087 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 4163.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3384387 bytes_read=1641634 bytes_retransmit=9 bytes_invalid=0 send_seq=91256 receive_seq=91255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=709021 sysload=0.02 cputime=221.781 memavail=1634456 print_time=4174.475 buffer_time=2.220 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 4164.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3384927 bytes_read=1642051 bytes_retransmit=9 bytes_invalid=0 send_seq=91275 receive_seq=91275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.497 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=709281 sysload=0.02 cputime=221.840 memavail=1634452 print_time=4175.260 buffer_time=2.002 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 4165.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3385792 bytes_read=1642462 bytes_retransmit=9 bytes_invalid=0 send_seq=91297 receive_seq=91297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=709596 sysload=0.02 cputime=221.901 memavail=1634404 print_time=4176.298 buffer_time=2.037 print_stall=10 extruder: target=215 temp=215.0 pwm=0.479
Stats 4166.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3386543 bytes_read=1642856 bytes_retransmit=9 bytes_invalid=0 send_seq=91317 receive_seq=91317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.066 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=709915 sysload=0.02 cputime=221.964 memavail=1634396 print_time=4177.331 buffer_time=2.067 print_stall=10 extruder: target=215 temp=215.1 pwm=0.485
Stats 4167.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3387222 bytes_read=1643265 bytes_retransmit=9 bytes_invalid=0 send_seq=91338 receive_seq=91338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.676 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=710242 sysload=0.02 cputime=222.025 memavail=1634648 print_time=4178.485 buffer_time=2.222 print_stall=10 extruder: target=215 temp=215.1 pwm=0.403
Stats 4168.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3387911 bytes_read=1643655 bytes_retransmit=9 bytes_invalid=0 send_seq=91358 receive_seq=91358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=710535 sysload=0.02 cputime=222.087 memavail=1634456 print_time=4179.397 buffer_time=2.133 print_stall=10 extruder: target=215 temp=215.0 pwm=0.500
Stats 4169.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3388626 bytes_read=1644027 bytes_retransmit=9 bytes_invalid=0 send_seq=91378 receive_seq=91377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=710860 sysload=0.02 cputime=222.147 memavail=1634708 print_time=4180.465 buffer_time=2.200 print_stall=10 extruder: target=215 temp=215.1 pwm=0.449
Stats 4170.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3389158 bytes_read=1644439 bytes_retransmit=9 bytes_invalid=0 send_seq=91396 receive_seq=91396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=711078 sysload=0.02 cputime=222.205 memavail=1634708 print_time=4181.362 buffer_time=2.095 print_stall=10 extruder: target=215 temp=215.1 pwm=0.449
Stats 4171.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3389797 bytes_read=1644845 bytes_retransmit=9 bytes_invalid=0 send_seq=91415 receive_seq=91414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=711301 sysload=0.02 cputime=222.267 memavail=1634708 print_time=4182.422 buffer_time=2.155 print_stall=10 extruder: target=215 temp=215.2 pwm=0.349
Stats 4172.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3390366 bytes_read=1645227 bytes_retransmit=9 bytes_invalid=0 send_seq=91433 receive_seq=91433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=711557 sysload=0.02 cputime=222.329 memavail=1634464 print_time=4183.647 buffer_time=2.377 print_stall=10 extruder: target=215 temp=215.0 pwm=0.558
Stats 4173.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3390948 bytes_read=1645648 bytes_retransmit=9 bytes_invalid=0 send_seq=91452 receive_seq=91451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.018 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=711721 sysload=0.02 cputime=222.385 memavail=1634464 print_time=4184.354 buffer_time=2.083 print_stall=10 extruder: target=215 temp=215.1 pwm=0.409
Stats 4174.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3391586 bytes_read=1646020 bytes_retransmit=9 bytes_invalid=0 send_seq=91469 receive_seq=91468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=712012 sysload=0.02 cputime=222.440 memavail=1634468 print_time=4185.604 buffer_time=2.331 print_stall=10 extruder: target=215 temp=215.2 pwm=0.409
Stats 4175.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3392066 bytes_read=1646392 bytes_retransmit=9 bytes_invalid=0 send_seq=91486 receive_seq=91485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.444 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=712276 sysload=0.02 cputime=222.500 memavail=1633964 print_time=4186.353 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.2 pwm=0.461
Stats 4176.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3393539 bytes_read=1646918 bytes_retransmit=9 bytes_invalid=0 send_seq=91521 receive_seq=91521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=712505 sysload=0.02 cputime=222.556 memavail=1633660 print_time=4187.759 buffer_time=2.484 print_stall=10 extruder: target=215 temp=215.1 pwm=0.494
Stats 4177.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3394199 bytes_read=1647300 bytes_retransmit=9 bytes_invalid=0 send_seq=91540 receive_seq=91540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=712571 sysload=0.02 cputime=222.601 memavail=1633660 print_time=4188.301 buffer_time=2.025 print_stall=10 extruder: target=215 temp=215.2 pwm=0.408
Stats 4178.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3395232 bytes_read=1647712 bytes_retransmit=9 bytes_invalid=0 send_seq=91565 receive_seq=91565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=712733 sysload=0.02 cputime=222.644 memavail=1633600 print_time=4189.513 buffer_time=2.236 print_stall=10 extruder: target=215 temp=215.2 pwm=0.444
Stats 4179.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3396344 bytes_read=1648178 bytes_retransmit=9 bytes_invalid=0 send_seq=91593 receive_seq=91592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=712858 sysload=0.02 cputime=222.694 memavail=1633856 print_time=4190.852 buffer_time=2.571 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 4180.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3396977 bytes_read=1648570 bytes_retransmit=9 bytes_invalid=0 send_seq=91613 receive_seq=91613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=712919 sysload=0.02 cputime=222.747 memavail=1633856 print_time=4191.571 buffer_time=2.289 print_stall=10 extruder: target=215 temp=215.2 pwm=0.464
Stats 4181.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3397586 bytes_read=1648982 bytes_retransmit=9 bytes_invalid=0 send_seq=91632 receive_seq=91632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=712982 sysload=0.02 cputime=222.790 memavail=1633856 print_time=4192.310 buffer_time=2.028 print_stall=10 extruder: target=215 temp=215.1 pwm=0.464
Stats 4182.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3398669 bytes_read=1649428 bytes_retransmit=9 bytes_invalid=0 send_seq=91659 receive_seq=91658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=713112 sysload=0.02 cputime=222.840 memavail=1633864 print_time=4193.857 buffer_time=2.573 print_stall=10 extruder: target=215 temp=215.2 pwm=0.408
Stats 4183.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3399327 bytes_read=1649820 bytes_retransmit=9 bytes_invalid=0 send_seq=91680 receive_seq=91679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.005 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=713211 sysload=0.02 cputime=222.891 memavail=1633872 print_time=4194.664 buffer_time=2.379 print_stall=10 extruder: target=215 temp=215.1 pwm=0.450
Stats 4184.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3399974 bytes_read=1650232 bytes_retransmit=9 bytes_invalid=0 send_seq=91701 receive_seq=91701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.031 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=713275 sysload=0.02 cputime=222.944 memavail=1634176 print_time=4195.491 buffer_time=2.204 print_stall=10 extruder: target=215 temp=215.0 pwm=0.562
Stats 4185.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3400690 bytes_read=1650658 bytes_retransmit=9 bytes_invalid=0 send_seq=91723 receive_seq=91723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.385 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=713341 sysload=0.02 cputime=223.000 memavail=1633672 print_time=4196.333 buffer_time=2.045 print_stall=10 extruder: target=215 temp=215.1 pwm=0.496
Stats 4186.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3401852 bytes_read=1651100 bytes_retransmit=9 bytes_invalid=0 send_seq=91752 receive_seq=91751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.225 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=713471 sysload=0.02 cputime=223.058 memavail=1633420 print_time=4198.065 buffer_time=2.773 print_stall=10 extruder: target=215 temp=215.2 pwm=0.411
Stats 4187.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3402520 bytes_read=1651497 bytes_retransmit=9 bytes_invalid=0 send_seq=91771 receive_seq=91770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=713566 sysload=0.02 cputime=223.113 memavail=1633424 print_time=4198.954 buffer_time=2.661 print_stall=10 extruder: target=215 temp=215.1 pwm=0.444
Stats 4188.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3403174 bytes_read=1651908 bytes_retransmit=9 bytes_invalid=0 send_seq=91790 receive_seq=91789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.367 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=713632 sysload=0.02 cputime=223.165 memavail=1633372 print_time=4199.858 buffer_time=2.564 print_stall=10 extruder: target=215 temp=215.0 pwm=0.512
Stats 4189.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3403833 bytes_read=1652290 bytes_retransmit=9 bytes_invalid=0 send_seq=91809 receive_seq=91808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=713695 sysload=0.02 cputime=223.214 memavail=1633372 print_time=4200.771 buffer_time=2.475 print_stall=10 extruder: target=215 temp=215.0 pwm=0.512
Stats 4190.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3404499 bytes_read=1652697 bytes_retransmit=9 bytes_invalid=0 send_seq=91829 receive_seq=91829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=713761 sysload=0.02 cputime=223.266 memavail=1633372 print_time=4201.694 buffer_time=2.397 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 4191.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3405191 bytes_read=1653138 bytes_retransmit=9 bytes_invalid=0 send_seq=91851 receive_seq=91851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=713825 sysload=0.02 cputime=223.322 memavail=1633380 print_time=4202.627 buffer_time=2.329 print_stall=10 extruder: target=215 temp=215.0 pwm=0.450
Stats 4192.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3405845 bytes_read=1653520 bytes_retransmit=9 bytes_invalid=0 send_seq=91870 receive_seq=91870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.434 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=713891 sysload=0.02 cputime=223.374 memavail=1633128 print_time=4203.569 buffer_time=2.270 print_stall=10 extruder: target=215 temp=215.1 pwm=0.450
Stats 4193.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3406607 bytes_read=1653917 bytes_retransmit=9 bytes_invalid=0 send_seq=91890 receive_seq=91889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=713984 sysload=0.01 cputime=223.428 memavail=1633640 print_time=4204.522 buffer_time=2.222 print_stall=10 extruder: target=215 temp=215.0 pwm=0.450
Stats 4194.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3407386 bytes_read=1654359 bytes_retransmit=9 bytes_invalid=0 send_seq=91913 receive_seq=91912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=714048 sysload=0.01 cputime=223.483 memavail=1633360 print_time=4205.481 buffer_time=2.180 print_stall=10 extruder: target=215 temp=214.9 pwm=0.571
Stats 4195.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3408160 bytes_read=1654756 bytes_retransmit=9 bytes_invalid=0 send_seq=91935 receive_seq=91934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.053 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=714111 sysload=0.01 cputime=223.535 memavail=1633712 print_time=4206.446 buffer_time=2.143 print_stall=10 extruder: target=215 temp=215.0 pwm=0.448
Stats 4196.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3408832 bytes_read=1655178 bytes_retransmit=9 bytes_invalid=0 send_seq=91955 receive_seq=91955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=714177 sysload=0.01 cputime=223.589 memavail=1633960 print_time=4207.415 buffer_time=2.111 print_stall=10 extruder: target=215 temp=214.9 pwm=0.462
Stats 4197.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3409539 bytes_read=1655604 bytes_retransmit=9 bytes_invalid=0 send_seq=91977 receive_seq=91977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=714241 sysload=0.01 cputime=223.641 memavail=1634212 print_time=4208.389 buffer_time=2.084 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 4198.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3410232 bytes_read=1656001 bytes_retransmit=9 bytes_invalid=0 send_seq=91999 receive_seq=91999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.476 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=714306 sysload=0.01 cputime=223.693 memavail=1633960 print_time=4209.368 buffer_time=2.061 print_stall=10 extruder: target=215 temp=214.8 pwm=0.528
Stats 4199.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3410932 bytes_read=1656418 bytes_retransmit=9 bytes_invalid=0 send_seq=92019 receive_seq=92019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.656 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=714401 sysload=0.01 cputime=223.745 memavail=1634472 print_time=4210.352 buffer_time=2.042 print_stall=10 extruder: target=215 temp=214.8 pwm=0.515
Stats 4200.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3411648 bytes_read=1656829 bytes_retransmit=9 bytes_invalid=0 send_seq=92041 receive_seq=92041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=714467 sysload=0.01 cputime=223.798 memavail=1634412 print_time=4211.337 buffer_time=2.027 print_stall=10 extruder: target=215 temp=214.9 pwm=0.476
Stats 4201.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3412331 bytes_read=1657231 bytes_retransmit=9 bytes_invalid=0 send_seq=92061 receive_seq=92061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.423 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=714531 sysload=0.01 cputime=223.852 memavail=1634412 print_time=4212.323 buffer_time=2.011 print_stall=10 extruder: target=215 temp=214.9 pwm=0.439
Stats 4202.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3413058 bytes_read=1657658 bytes_retransmit=9 bytes_invalid=0 send_seq=92083 receive_seq=92083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=714596 sysload=0.01 cputime=223.905 memavail=1634164 print_time=4213.309 buffer_time=1.995 print_stall=10 extruder: target=215 temp=215.0 pwm=0.430
Stats 4203.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3414208 bytes_read=1658094 bytes_retransmit=9 bytes_invalid=0 send_seq=92111 receive_seq=92110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=714721 sysload=0.01 cputime=223.960 memavail=1634476 print_time=4215.281 buffer_time=2.966 print_stall=10 extruder: target=215 temp=214.9 pwm=0.464
Stats 4204.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3414835 bytes_read=1658471 bytes_retransmit=9 bytes_invalid=0 send_seq=92129 receive_seq=92128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=714815 sysload=0.01 cputime=224.013 memavail=1634728 print_time=4216.267 buffer_time=2.950 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 4205.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3415540 bytes_read=1658893 bytes_retransmit=9 bytes_invalid=0 send_seq=92150 receive_seq=92149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=714880 sysload=0.01 cputime=224.067 memavail=1634224 print_time=4217.250 buffer_time=2.930 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 4206.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3416249 bytes_read=1659324 bytes_retransmit=9 bytes_invalid=0 send_seq=92172 receive_seq=92172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=714944 sysload=0.01 cputime=224.106 memavail=1633924 print_time=4218.229 buffer_time=2.909 print_stall=10 extruder: target=215 temp=214.9 pwm=0.553
Stats 4207.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3416925 bytes_read=1659701 bytes_retransmit=9 bytes_invalid=0 send_seq=92191 receive_seq=92190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=715010 sysload=0.01 cputime=224.151 memavail=1633984 print_time=4219.203 buffer_time=2.880 print_stall=10 extruder: target=215 temp=215.0 pwm=0.481
Stats 4208.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3417635 bytes_read=1660128 bytes_retransmit=9 bytes_invalid=0 send_seq=92213 receive_seq=92212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.656 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=715074 sysload=0.09 cputime=224.206 memavail=1634488 print_time=4220.172 buffer_time=2.849 print_stall=10 extruder: target=215 temp=215.0 pwm=0.480
Stats 4209.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3418288 bytes_read=1660544 bytes_retransmit=9 bytes_invalid=0 send_seq=92235 receive_seq=92235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.8 pwm=0.796 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=715107 sysload=0.09 cputime=224.259 memavail=1634740 print_time=4220.879 buffer_time=2.553 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 4210.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3419034 bytes_read=1660931 bytes_retransmit=9 bytes_invalid=0 send_seq=92256 receive_seq=92255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.041 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=715172 sysload=0.09 cputime=224.310 memavail=1635004 print_time=4221.843 buffer_time=2.516 print_stall=10 extruder: target=215 temp=214.9 pwm=0.488
Stats 4211.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3419763 bytes_read=1661363 bytes_retransmit=9 bytes_invalid=0 send_seq=92276 receive_seq=92275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.468 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=715268 sysload=0.09 cputime=224.368 memavail=1635256 print_time=4222.802 buffer_time=2.472 print_stall=10 extruder: target=215 temp=214.9 pwm=0.488
Stats 4212.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3420559 bytes_read=1661779 bytes_retransmit=9 bytes_invalid=0 send_seq=92299 receive_seq=92298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=715365 sysload=0.09 cputime=224.425 memavail=1635004 print_time=4223.992 buffer_time=2.660 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 4213.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3421251 bytes_read=1662171 bytes_retransmit=9 bytes_invalid=0 send_seq=92320 receive_seq=92319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.074 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=715430 sysload=0.08 cputime=224.479 memavail=1634500 print_time=4224.925 buffer_time=2.591 print_stall=10 extruder: target=215 temp=214.8 pwm=0.577
Stats 4214.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3421916 bytes_read=1662588 bytes_retransmit=9 bytes_invalid=0 send_seq=92340 receive_seq=92339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.484 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=715493 sysload=0.08 cputime=224.532 memavail=1634308 print_time=4225.848 buffer_time=2.514 print_stall=10 extruder: target=215 temp=215.0 pwm=0.492
Stats 4215.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3422631 bytes_read=1663009 bytes_retransmit=9 bytes_invalid=0 send_seq=92363 receive_seq=92363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.106 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=715556 sysload=0.08 cputime=224.582 memavail=1634308 print_time=4226.761 buffer_time=2.427 print_stall=10 extruder: target=215 temp=215.0 pwm=0.462
Stats 4216.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3423302 bytes_read=1663411 bytes_retransmit=9 bytes_invalid=0 send_seq=92383 receive_seq=92383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=715651 sysload=0.08 cputime=224.621 memavail=1634764 print_time=4227.673 buffer_time=2.337 print_stall=10 extruder: target=215 temp=215.1 pwm=0.389
Stats 4217.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3424012 bytes_read=1663848 bytes_retransmit=9 bytes_invalid=0 send_seq=92407 receive_seq=92407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.086 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=715716 sysload=0.08 cputime=224.666 memavail=1634260 print_time=4228.553 buffer_time=2.217 print_stall=10 extruder: target=215 temp=215.1 pwm=0.438
Stats 4218.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3424688 bytes_read=1664249 bytes_retransmit=9 bytes_invalid=0 send_seq=92427 receive_seq=92427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=715779 sysload=0.08 cputime=224.717 memavail=1634768 print_time=4229.427 buffer_time=2.088 print_stall=10 extruder: target=215 temp=215.0 pwm=0.515
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4219.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3425843 bytes_read=1664676 bytes_retransmit=9 bytes_invalid=0 send_seq=92456 receive_seq=92455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=715908 sysload=0.08 cputime=224.775 memavail=1634520 print_time=4231.128 buffer_time=2.787 print_stall=10 extruder: target=215 temp=214.9 pwm=0.551
Stats 4220.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3426554 bytes_read=1665108 bytes_retransmit=9 bytes_invalid=0 send_seq=92479 receive_seq=92478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.609 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=716006 sysload=0.08 cputime=224.831 memavail=1634468 print_time=4231.970 buffer_time=2.627 print_stall=10 extruder: target=215 temp=215.1 pwm=0.420
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4221.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3427256 bytes_read=1665539 bytes_retransmit=9 bytes_invalid=0 send_seq=92502 receive_seq=92501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.527 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=716069 sysload=0.08 cputime=224.885 memavail=1634484 print_time=4232.761 buffer_time=2.417 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 4222.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3427879 bytes_read=1665931 bytes_retransmit=9 bytes_invalid=0 send_seq=92522 receive_seq=92522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=716134 sysload=0.08 cputime=224.937 memavail=1634972 print_time=4233.546 buffer_time=2.201 print_stall=10 extruder: target=215 temp=215.0 pwm=0.559
Stats 4223.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3428948 bytes_read=1666383 bytes_retransmit=9 bytes_invalid=0 send_seq=92550 receive_seq=92549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=716260 sysload=0.07 cputime=224.994 memavail=1634468 print_time=4235.048 buffer_time=2.702 print_stall=10 extruder: target=215 temp=215.1 pwm=0.466
Stats 4224.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3429598 bytes_read=1666789 bytes_retransmit=9 bytes_invalid=0 send_seq=92571 receive_seq=92570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=716323 sysload=0.07 cputime=225.044 memavail=1634468 print_time=4235.765 buffer_time=2.418 print_stall=10 extruder: target=215 temp=214.9 pwm=0.521
Stats 4225.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3430232 bytes_read=1667184 bytes_retransmit=9 bytes_invalid=0 send_seq=92592 receive_seq=92592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.552 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=716387 sysload=0.07 cputime=225.098 memavail=1634160 print_time=4236.451 buffer_time=2.103 print_stall=10 extruder: target=215 temp=214.9 pwm=0.529
Stats 4226.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3431294 bytes_read=1667639 bytes_retransmit=9 bytes_invalid=0 send_seq=92619 receive_seq=92619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=716545 sysload=0.07 cputime=225.143 memavail=1633980 print_time=4237.727 buffer_time=2.377 print_stall=10 extruder: target=215 temp=214.9 pwm=0.528
Stats 4227.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3432622 bytes_read=1668079 bytes_retransmit=9 bytes_invalid=0 send_seq=92650 receive_seq=92649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=716672 sysload=0.07 cputime=225.199 memavail=1633972 print_time=4238.859 buffer_time=2.507 print_stall=10 extruder: target=215 temp=215.2 pwm=0.346
Stats 4228.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3433276 bytes_read=1668466 bytes_retransmit=9 bytes_invalid=0 send_seq=92672 receive_seq=92671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.778 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=716768 sysload=0.06 cputime=225.253 memavail=1634188 print_time=4239.356 buffer_time=2.003 print_stall=10 extruder: target=215 temp=215.0 pwm=0.462
Stats 4229.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3434907 bytes_read=1668961 bytes_retransmit=9 bytes_invalid=0 send_seq=92709 receive_seq=92708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=717026 sysload=0.06 cputime=225.312 memavail=1634440 print_time=4240.581 buffer_time=2.227 print_stall=10 extruder: target=215 temp=215.0 pwm=0.480
Stats 4230.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3436395 bytes_read=1669442 bytes_retransmit=9 bytes_invalid=0 send_seq=92744 receive_seq=92744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=717422 sysload=0.06 cputime=225.373 memavail=1633996 print_time=4241.583 buffer_time=2.228 print_stall=10 extruder: target=215 temp=215.0 pwm=0.456
Stats 4231.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=3437526 bytes_read=1669874 bytes_retransmit=9 bytes_invalid=0 send_seq=92771 receive_seq=92770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.505 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=717895 sysload=0.06 cputime=225.433 memavail=1634500 print_time=4242.661 buffer_time=2.304 print_stall=10 extruder: target=215 temp=215.2 pwm=0.361
Stats 4232.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=3438112 bytes_read=1670286 bytes_retransmit=9 bytes_invalid=0 send_seq=92790 receive_seq=92789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.448 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=718303 sysload=0.06 cputime=225.492 memavail=1634508 print_time=4243.437 buffer_time=2.078 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 4233.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=3438728 bytes_read=1670682 bytes_retransmit=9 bytes_invalid=0 send_seq=92808 receive_seq=92808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=718749 sysload=0.06 cputime=225.548 memavail=1634008 print_time=4244.410 buffer_time=2.051 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 4234.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=3439481 bytes_read=1671074 bytes_retransmit=9 bytes_invalid=0 send_seq=92829 receive_seq=92829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=719297 sysload=0.06 cputime=225.609 memavail=1634016 print_time=4245.535 buffer_time=2.175 print_stall=10 extruder: target=215 temp=215.2 pwm=0.358
Stats 4235.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=3440435 bytes_read=1671511 bytes_retransmit=9 bytes_invalid=0 send_seq=92854 receive_seq=92853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=719845 sysload=0.06 cputime=225.673 memavail=1634008 print_time=4246.606 buffer_time=2.245 print_stall=10 extruder: target=215 temp=215.2 pwm=0.389
Stats 4236.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3440998 bytes_read=1671932 bytes_retransmit=9 bytes_invalid=0 send_seq=92874 receive_seq=92874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.120 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=720191 sysload=0.06 cputime=225.721 memavail=1633756 print_time=4247.377 buffer_time=2.015 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 4237.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3441774 bytes_read=1672324 bytes_retransmit=9 bytes_invalid=0 send_seq=92895 receive_seq=92895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=720663 sysload=0.06 cputime=225.774 memavail=1634016 print_time=4248.406 buffer_time=2.041 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 4238.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3442410 bytes_read=1672731 bytes_retransmit=9 bytes_invalid=0 send_seq=92913 receive_seq=92913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.186 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=721145 sysload=0.06 cputime=225.836 memavail=1634276 print_time=4249.434 buffer_time=2.069 print_stall=10 extruder: target=215 temp=215.2 pwm=0.463
Stats 4239.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3443103 bytes_read=1673122 bytes_retransmit=9 bytes_invalid=0 send_seq=92932 receive_seq=92931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.604 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=721631 sysload=0.05 cputime=225.894 memavail=1634520 print_time=4250.462 buffer_time=2.097 print_stall=10 extruder: target=215 temp=215.1 pwm=0.469
Stats 4240.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3443954 bytes_read=1673524 bytes_retransmit=9 bytes_invalid=0 send_seq=92955 receive_seq=92954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.043 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=722180 sysload=0.05 cputime=225.959 memavail=1634780 print_time=4251.674 buffer_time=2.307 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 4241.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3444415 bytes_read=1673955 bytes_retransmit=9 bytes_invalid=0 send_seq=92971 receive_seq=92971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=722401 sysload=0.05 cputime=226.011 memavail=1635028 print_time=4252.378 buffer_time=2.009 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 4242.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3445173 bytes_read=1674327 bytes_retransmit=9 bytes_invalid=0 send_seq=92989 receive_seq=92988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=722872 sysload=0.05 cputime=226.072 memavail=1634784 print_time=4253.786 buffer_time=2.416 print_stall=10 extruder: target=215 temp=215.0 pwm=0.474
Stats 4243.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3445597 bytes_read=1674694 bytes_retransmit=9 bytes_invalid=0 send_seq=93004 receive_seq=93004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.612 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=723127 sysload=0.05 cputime=226.112 memavail=1634540 print_time=4254.490 buffer_time=2.120 print_stall=10 extruder: target=215 temp=215.1 pwm=0.520
Stats 4244.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3446267 bytes_read=1675120 bytes_retransmit=9 bytes_invalid=0 send_seq=93024 receive_seq=93023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=723486 sysload=0.05 cputime=226.161 memavail=1634792 print_time=4255.545 buffer_time=2.173 print_stall=10 extruder: target=215 temp=215.0 pwm=0.487
Stats 4245.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3446849 bytes_read=1675497 bytes_retransmit=9 bytes_invalid=0 send_seq=93041 receive_seq=93041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=723842 sysload=0.05 cputime=226.216 memavail=1635012 print_time=4256.466 buffer_time=2.092 print_stall=10 extruder: target=215 temp=215.0 pwm=0.487
Stats 4246.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3447793 bytes_read=1675914 bytes_retransmit=9 bytes_invalid=0 send_seq=93064 receive_seq=93064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=724300 sysload=0.05 cputime=226.261 memavail=1635292 print_time=4257.752 buffer_time=2.379 print_stall=10 extruder: target=215 temp=215.1 pwm=0.403
Stats 4247.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3448872 bytes_read=1676370 bytes_retransmit=9 bytes_invalid=0 send_seq=93090 receive_seq=93089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.035 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=724452 sysload=0.05 cputime=226.310 memavail=1635540 print_time=4258.552 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 4248.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3449855 bytes_read=1676782 bytes_retransmit=9 bytes_invalid=0 send_seq=93114 receive_seq=93114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=724577 sysload=0.05 cputime=226.364 memavail=1635804 print_time=4259.560 buffer_time=2.184 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 4249.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3451050 bytes_read=1677224 bytes_retransmit=9 bytes_invalid=0 send_seq=93143 receive_seq=93142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=724734 sysload=0.04 cputime=226.420 memavail=1635552 print_time=4260.743 buffer_time=2.364 print_stall=10 extruder: target=215 temp=214.9 pwm=0.532
Stats 4250.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3451704 bytes_read=1677655 bytes_retransmit=9 bytes_invalid=0 send_seq=93165 receive_seq=93165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.401 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=724798 sysload=0.04 cputime=226.474 memavail=1635804 print_time=4261.385 buffer_time=2.005 print_stall=10 extruder: target=215 temp=215.1 pwm=0.420
Stats 4251.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3452753 bytes_read=1678082 bytes_retransmit=9 bytes_invalid=0 send_seq=93191 receive_seq=93190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=724957 sysload=0.04 cputime=226.528 memavail=1635864 print_time=4262.775 buffer_time=2.395 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 4252.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3453401 bytes_read=1678489 bytes_retransmit=9 bytes_invalid=0 send_seq=93212 receive_seq=93211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=725020 sysload=0.04 cputime=226.582 memavail=1635360 print_time=4263.495 buffer_time=2.113 print_stall=10 extruder: target=215 temp=215.0 pwm=0.528
Stats 4253.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3454421 bytes_read=1678951 bytes_retransmit=9 bytes_invalid=0 send_seq=93239 receive_seq=93238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=725145 sysload=0.04 cputime=226.638 memavail=1635604 print_time=4265.023 buffer_time=2.641 print_stall=10 extruder: target=215 temp=215.1 pwm=0.509
Stats 4254.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3455044 bytes_read=1679338 bytes_retransmit=9 bytes_invalid=0 send_seq=93259 receive_seq=93258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=725242 sysload=0.04 cputime=226.687 memavail=1635872 print_time=4265.822 buffer_time=2.437 print_stall=10 extruder: target=215 temp=214.9 pwm=0.578
Stats 4255.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3455713 bytes_read=1679750 bytes_retransmit=9 bytes_invalid=0 send_seq=93280 receive_seq=93280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=725306 sysload=0.04 cputime=226.739 memavail=1635612 print_time=4266.642 buffer_time=2.257 print_stall=10 extruder: target=215 temp=215.1 pwm=0.427
Stats 4256.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3456371 bytes_read=1680181 bytes_retransmit=9 bytes_invalid=0 send_seq=93300 receive_seq=93300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.137 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=725371 sysload=0.04 cputime=226.791 memavail=1635184 print_time=4267.476 buffer_time=2.090 print_stall=10 extruder: target=215 temp=215.1 pwm=0.481
Stats 4257.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3457369 bytes_read=1680583 bytes_retransmit=9 bytes_invalid=0 send_seq=93323 receive_seq=93323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.137 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=725500 sysload=0.04 cputime=226.842 memavail=1634932 print_time=4269.193 buffer_time=2.805 print_stall=10 extruder: target=215 temp=215.0 pwm=0.481
Stats 4258.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3458077 bytes_read=1680985 bytes_retransmit=9 bytes_invalid=0 send_seq=93343 receive_seq=93343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=725564 sysload=0.04 cputime=226.880 memavail=1634872 print_time=4270.074 buffer_time=2.686 print_stall=10 extruder: target=215 temp=215.0 pwm=0.521
Stats 4259.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3458769 bytes_read=1681396 bytes_retransmit=9 bytes_invalid=0 send_seq=93363 receive_seq=93362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=725662 sysload=0.04 cputime=226.924 memavail=1635120 print_time=4270.977 buffer_time=2.587 print_stall=10 extruder: target=215 temp=215.0 pwm=0.454
Stats 4260.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3459470 bytes_read=1681793 bytes_retransmit=9 bytes_invalid=0 send_seq=93384 receive_seq=93384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=725726 sysload=0.04 cputime=226.962 memavail=1635128 print_time=4271.881 buffer_time=2.490 print_stall=10 extruder: target=215 temp=215.1 pwm=0.413
Stats 4261.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3460114 bytes_read=1682205 bytes_retransmit=9 bytes_invalid=0 send_seq=93403 receive_seq=93403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=725792 sysload=0.04 cputime=226.992 memavail=1635380 print_time=4272.798 buffer_time=2.407 print_stall=10 extruder: target=215 temp=215.0 pwm=0.476
Stats 4262.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3460765 bytes_read=1682621 bytes_retransmit=9 bytes_invalid=0 send_seq=93423 receive_seq=93423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=725856 sysload=0.04 cputime=227.024 memavail=1635380 print_time=4273.724 buffer_time=2.333 print_stall=10 extruder: target=215 temp=214.9 pwm=0.538
Stats 4263.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3461409 bytes_read=1683008 bytes_retransmit=9 bytes_invalid=0 send_seq=93443 receive_seq=93443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.048 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=725922 sysload=0.04 cputime=227.069 memavail=1634884 print_time=4274.661 buffer_time=2.265 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 4264.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3462109 bytes_read=1683415 bytes_retransmit=9 bytes_invalid=0 send_seq=93464 receive_seq=93464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.427 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=726018 sysload=0.03 cputime=227.123 memavail=1634888 print_time=4275.607 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.1 pwm=0.362
Stats 4265.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3462768 bytes_read=1683821 bytes_retransmit=9 bytes_invalid=0 send_seq=93482 receive_seq=93482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=726083 sysload=0.03 cputime=227.165 memavail=1634888 print_time=4276.562 buffer_time=2.164 print_stall=10 extruder: target=215 temp=215.1 pwm=0.405
Stats 4266.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3463429 bytes_read=1684218 bytes_retransmit=9 bytes_invalid=0 send_seq=93501 receive_seq=93501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.100 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=726147 sysload=0.03 cputime=227.201 memavail=1634576 print_time=4277.521 buffer_time=2.123 print_stall=10 extruder: target=215 temp=214.9 pwm=0.496
Stats 4267.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3464110 bytes_read=1684615 bytes_retransmit=9 bytes_invalid=0 send_seq=93520 receive_seq=93520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.509 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=726212 sysload=0.03 cputime=227.246 memavail=1634580 print_time=4278.485 buffer_time=2.084 print_stall=10 extruder: target=215 temp=215.0 pwm=0.416
Stats 4268.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3464740 bytes_read=1685031 bytes_retransmit=9 bytes_invalid=0 send_seq=93540 receive_seq=93540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=726275 sysload=0.03 cputime=227.301 memavail=1634572 print_time=4279.454 buffer_time=2.052 print_stall=10 extruder: target=215 temp=214.9 pwm=0.545
Stats 4269.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3465416 bytes_read=1685418 bytes_retransmit=9 bytes_invalid=0 send_seq=93560 receive_seq=93560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=726340 sysload=0.03 cputime=227.350 memavail=1634580 print_time=4280.428 buffer_time=2.023 print_stall=10 extruder: target=215 temp=215.1 pwm=0.452
Stats 4270.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3466075 bytes_read=1685815 bytes_retransmit=9 bytes_invalid=0 send_seq=93579 receive_seq=93579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=726435 sysload=0.03 cputime=227.404 memavail=1634320 print_time=4281.406 buffer_time=2.000 print_stall=10 extruder: target=215 temp=214.9 pwm=0.480
Stats 4271.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3467246 bytes_read=1686281 bytes_retransmit=9 bytes_invalid=0 send_seq=93607 receive_seq=93606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=726564 sysload=0.03 cputime=227.466 memavail=1634564 print_time=4283.369 buffer_time=2.959 print_stall=10 extruder: target=215 temp=215.0 pwm=0.514
Stats 4272.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3467951 bytes_read=1686683 bytes_retransmit=9 bytes_invalid=0 send_seq=93629 receive_seq=93629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=726629 sysload=0.03 cputime=227.519 memavail=1634324 print_time=4284.350 buffer_time=2.940 print_stall=10 extruder: target=215 temp=215.2 pwm=0.343
Stats 4273.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3468571 bytes_read=1687095 bytes_retransmit=9 bytes_invalid=0 send_seq=93649 receive_seq=93648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=66 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.085 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=726693 sysload=0.03 cputime=227.573 memavail=1634284 print_time=4285.331 buffer_time=2.921 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 4274.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3469292 bytes_read=1687501 bytes_retransmit=9 bytes_invalid=0 send_seq=93670 receive_seq=93669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.203 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=726759 sysload=0.03 cputime=227.625 memavail=1634292 print_time=4286.313 buffer_time=2.900 print_stall=10 extruder: target=215 temp=215.1 pwm=0.399
Stats 4275.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=3469992 bytes_read=1687898 bytes_retransmit=9 bytes_invalid=0 send_seq=93692 receive_seq=93691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=726854 sysload=0.03 cputime=227.679 memavail=1634308 print_time=4287.294 buffer_time=2.881 print_stall=10 extruder: target=215 temp=215.0 pwm=0.503
Stats 4276.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3470698 bytes_read=1688340 bytes_retransmit=9 bytes_invalid=0 send_seq=93713 receive_seq=93713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=726920 sysload=0.03 cputime=227.723 memavail=1634536 print_time=4288.273 buffer_time=2.860 print_stall=10 extruder: target=215 temp=215.0 pwm=0.465
Stats 4277.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3471355 bytes_read=1688726 bytes_retransmit=9 bytes_invalid=0 send_seq=93731 receive_seq=93730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=726984 sysload=0.03 cputime=227.769 memavail=1635044 print_time=4289.249 buffer_time=2.832 print_stall=10 extruder: target=215 temp=215.0 pwm=0.506
Stats 4278.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3472020 bytes_read=1689108 bytes_retransmit=9 bytes_invalid=0 send_seq=93750 receive_seq=93749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=727050 sysload=0.03 cputime=227.821 memavail=1635300 print_time=4290.219 buffer_time=2.801 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 4279.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3472657 bytes_read=1689530 bytes_retransmit=9 bytes_invalid=0 send_seq=93770 receive_seq=93770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=727113 sysload=0.03 cputime=227.873 memavail=1635032 print_time=4291.184 buffer_time=2.765 print_stall=10 extruder: target=215 temp=215.1 pwm=0.416
Stats 4280.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3473352 bytes_read=1689921 bytes_retransmit=9 bytes_invalid=0 send_seq=93789 receive_seq=93788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=727179 sysload=0.03 cputime=227.924 memavail=1635044 print_time=4292.145 buffer_time=2.724 print_stall=10 extruder: target=215 temp=215.1 pwm=0.376
Stats 4281.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3474031 bytes_read=1690328 bytes_retransmit=9 bytes_invalid=0 send_seq=93809 receive_seq=93809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=727275 sysload=0.03 cputime=227.970 memavail=1635024 print_time=4293.101 buffer_time=2.680 print_stall=10 extruder: target=215 temp=214.9 pwm=0.533
Stats 4282.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3474695 bytes_read=1690740 bytes_retransmit=9 bytes_invalid=0 send_seq=93829 receive_seq=93828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=727341 sysload=0.03 cputime=228.016 memavail=1634968 print_time=4294.050 buffer_time=2.626 print_stall=10 extruder: target=215 temp=214.9 pwm=0.471
Stats 4283.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3475378 bytes_read=1691151 bytes_retransmit=9 bytes_invalid=0 send_seq=93850 receive_seq=93850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=727405 sysload=0.03 cputime=228.061 memavail=1635236 print_time=4294.989 buffer_time=2.565 print_stall=10 extruder: target=215 temp=215.1 pwm=0.383
Stats 4284.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3476073 bytes_read=1691538 bytes_retransmit=9 bytes_invalid=0 send_seq=93871 receive_seq=93870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=727469 sysload=0.02 cputime=228.106 memavail=1634984 print_time=4295.919 buffer_time=2.491 print_stall=10 extruder: target=215 temp=215.0 pwm=0.481
Stats 4285.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3476721 bytes_read=1691952 bytes_retransmit=9 bytes_invalid=0 send_seq=93891 receive_seq=93891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.600 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=727531 sysload=0.02 cputime=228.159 memavail=1634992 print_time=4296.839 buffer_time=2.410 print_stall=10 extruder: target=215 temp=214.8 pwm=0.558
Stats 4286.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3477363 bytes_read=1692361 bytes_retransmit=9 bytes_invalid=0 send_seq=93912 receive_seq=93912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.603 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=727595 sysload=0.02 cputime=228.209 memavail=1635264 print_time=4297.749 buffer_time=2.320 print_stall=10 extruder: target=215 temp=215.0 pwm=0.423
Stats 4287.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3478063 bytes_read=1692753 bytes_retransmit=9 bytes_invalid=0 send_seq=93935 receive_seq=93935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=727691 sysload=0.02 cputime=228.259 memavail=1635208 print_time=4298.659 buffer_time=2.229 print_stall=10 extruder: target=215 temp=214.8 pwm=0.600
Stats 4288.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3478751 bytes_read=1693163 bytes_retransmit=9 bytes_invalid=0 send_seq=93956 receive_seq=93956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=727757 sysload=0.02 cputime=228.316 memavail=1634956 print_time=4299.535 buffer_time=2.104 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
Stats 4289.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3479901 bytes_read=1693603 bytes_retransmit=9 bytes_invalid=0 send_seq=93984 receive_seq=93984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.211 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=727886 sysload=0.02 cputime=228.367 memavail=1634712 print_time=4301.261 buffer_time=2.829 print_stall=10 extruder: target=215 temp=214.9 pwm=0.504
Stats 4290.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3480521 bytes_read=1693995 bytes_retransmit=9 bytes_invalid=0 send_seq=94005 receive_seq=94005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=727950 sysload=0.02 cputime=228.414 memavail=1634712 print_time=4302.100 buffer_time=2.668 print_stall=10 extruder: target=215 temp=214.8 pwm=0.537
Stats 4291.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3481204 bytes_read=1694422 bytes_retransmit=9 bytes_invalid=0 send_seq=94024 receive_seq=94024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=728046 sysload=0.02 cputime=228.473 memavail=1634712 print_time=4302.941 buffer_time=2.505 print_stall=10 extruder: target=215 temp=214.9 pwm=0.520
Stats 4292.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3481881 bytes_read=1694823 bytes_retransmit=9 bytes_invalid=0 send_seq=94045 receive_seq=94044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.027 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=728110 sysload=0.02 cputime=228.529 memavail=1634712 print_time=4303.728 buffer_time=2.293 print_stall=10 extruder: target=215 temp=214.9 pwm=0.550
Stats 4293.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3482536 bytes_read=1695225 bytes_retransmit=9 bytes_invalid=0 send_seq=94067 receive_seq=94067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.191 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=728176 sysload=0.02 cputime=228.585 memavail=1634420 print_time=4304.511 buffer_time=2.075 print_stall=10 extruder: target=215 temp=215.0 pwm=0.431
Stats 4294.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3483605 bytes_read=1695672 bytes_retransmit=9 bytes_invalid=0 send_seq=94094 receive_seq=94093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=728305 sysload=0.02 cputime=228.646 memavail=1634460 print_time=4306.008 buffer_time=2.570 print_stall=10 extruder: target=215 temp=215.0 pwm=0.434
Stats 4295.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3484194 bytes_read=1696073 bytes_retransmit=9 bytes_invalid=0 send_seq=94113 receive_seq=94113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=728399 sysload=0.02 cputime=228.690 memavail=1634216 print_time=4306.727 buffer_time=2.289 print_stall=10 extruder: target=215 temp=215.1 pwm=0.362
Stats 4296.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3485297 bytes_read=1696505 bytes_retransmit=9 bytes_invalid=0 send_seq=94140 receive_seq=94139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.436 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=728529 sysload=0.02 cputime=228.744 memavail=1634984 print_time=4308.057 buffer_time=2.615 print_stall=10 extruder: target=215 temp=214.9 pwm=0.525
Stats 4297.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3485895 bytes_read=1696932 bytes_retransmit=9 bytes_invalid=0 send_seq=94161 receive_seq=94161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=728625 sysload=0.02 cputime=228.790 memavail=1635208 print_time=4308.677 buffer_time=2.234 print_stall=10 extruder: target=215 temp=214.9 pwm=0.579
Stats 4298.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3486977 bytes_read=1697378 bytes_retransmit=9 bytes_invalid=0 send_seq=94190 receive_seq=94190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=728751 sysload=0.02 cputime=228.839 memavail=1635216 print_time=4309.805 buffer_time=2.361 print_stall=10 extruder: target=215 temp=214.8 pwm=0.600
Stats 4299.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3488085 bytes_read=1697800 bytes_retransmit=9 bytes_invalid=0 send_seq=94218 receive_seq=94217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=728946 sysload=0.02 cputime=228.900 memavail=1635240 print_time=4310.770 buffer_time=2.324 print_stall=10 extruder: target=215 temp=214.9 pwm=0.479
Stats 4300.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3489423 bytes_read=1698277 bytes_retransmit=9 bytes_invalid=0 send_seq=94249 receive_seq=94249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=729400 sysload=0.02 cputime=228.956 memavail=1634956 print_time=4311.674 buffer_time=2.228 print_stall=10 extruder: target=215 temp=214.9 pwm=0.476
Stats 4301.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3490848 bytes_read=1698753 bytes_retransmit=9 bytes_invalid=0 send_seq=94282 receive_seq=94281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=729815 sysload=0.02 cputime=229.010 memavail=1634948 print_time=4312.754 buffer_time=2.306 print_stall=10 extruder: target=215 temp=214.9 pwm=0.476
Stats 4302.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3491490 bytes_read=1699135 bytes_retransmit=9 bytes_invalid=0 send_seq=94301 receive_seq=94300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=730259 sysload=0.02 cputime=229.075 memavail=1634760 print_time=4313.625 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.0 pwm=0.416
Stats 4303.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3492093 bytes_read=1699552 bytes_retransmit=9 bytes_invalid=0 send_seq=94320 receive_seq=94320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=730741 sysload=0.02 cputime=229.128 memavail=1634720 print_time=4314.620 buffer_time=2.171 print_stall=10 extruder: target=215 temp=215.0 pwm=0.416
Stats 4304.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3492815 bytes_read=1699953 bytes_retransmit=9 bytes_invalid=0 send_seq=94341 receive_seq=94340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=731198 sysload=0.02 cputime=229.181 memavail=1634732 print_time=4315.539 buffer_time=2.086 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 4305.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3493437 bytes_read=1700335 bytes_retransmit=9 bytes_invalid=0 send_seq=94359 receive_seq=94359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.024 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=731689 sysload=0.02 cputime=229.237 memavail=1634732 print_time=4316.536 buffer_time=2.082 print_stall=10 extruder: target=215 temp=214.9 pwm=0.478
Stats 4306.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3494291 bytes_read=1700772 bytes_retransmit=9 bytes_invalid=0 send_seq=94380 receive_seq=94380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.025 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=732195 sysload=0.02 cputime=229.283 memavail=1634700 print_time=4317.595 buffer_time=2.141 print_stall=10 extruder: target=215 temp=215.0 pwm=0.426
Stats 4307.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3495037 bytes_read=1701163 bytes_retransmit=9 bytes_invalid=0 send_seq=94399 receive_seq=94398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.697 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=732668 sysload=0.02 cputime=229.337 memavail=1634484 print_time=4318.619 buffer_time=2.162 print_stall=10 extruder: target=215 temp=215.0 pwm=0.489
Stats 4308.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3495672 bytes_read=1701545 bytes_retransmit=9 bytes_invalid=0 send_seq=94418 receive_seq=94417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=733151 sysload=0.02 cputime=229.401 memavail=1634732 print_time=4319.642 buffer_time=2.183 print_stall=10 extruder: target=215 temp=215.0 pwm=0.489
Stats 4309.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3496376 bytes_read=1701957 bytes_retransmit=9 bytes_invalid=0 send_seq=94437 receive_seq=94436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=733639 sysload=0.01 cputime=229.469 memavail=1635256 print_time=4320.666 buffer_time=2.205 print_stall=10 extruder: target=215 temp=214.9 pwm=0.489
Stats 4310.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3497078 bytes_read=1702368 bytes_retransmit=9 bytes_invalid=0 send_seq=94458 receive_seq=94458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.489 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=734062 sysload=0.01 cputime=229.532 memavail=1635000 print_time=4321.494 buffer_time=2.032 print_stall=10 extruder: target=215 temp=215.1 pwm=0.377
Stats 4311.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3497675 bytes_read=1702771 bytes_retransmit=9 bytes_invalid=0 send_seq=94476 receive_seq=94476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=734412 sysload=0.01 cputime=229.596 memavail=1635268 print_time=4322.545 buffer_time=2.081 print_stall=10 extruder: target=215 temp=214.9 pwm=0.506
Stats 4312.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3498266 bytes_read=1703178 bytes_retransmit=9 bytes_invalid=0 send_seq=94494 receive_seq=94494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=734760 sysload=0.01 cputime=229.662 memavail=1635500 print_time=4323.489 buffer_time=2.026 print_stall=10 extruder: target=215 temp=214.9 pwm=0.479
Stats 4313.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3498889 bytes_read=1703559 bytes_retransmit=9 bytes_invalid=0 send_seq=94510 receive_seq=94510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.448 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=735145 sysload=0.01 cputime=229.727 memavail=1634992 print_time=4324.647 buffer_time=2.182 print_stall=10 extruder: target=215 temp=215.1 pwm=0.418
Stats 4314.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3499483 bytes_read=1703926 bytes_retransmit=9 bytes_invalid=0 send_seq=94527 receive_seq=94526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=735504 sysload=0.09 cputime=229.793 memavail=1634748 print_time=4325.698 buffer_time=2.232 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 4315.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3500358 bytes_read=1704377 bytes_retransmit=9 bytes_invalid=0 send_seq=94550 receive_seq=94550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=735860 sysload=0.09 cputime=229.850 memavail=1634756 print_time=4326.643 buffer_time=2.175 print_stall=10 extruder: target=215 temp=214.9 pwm=0.532
Stats 4316.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000069 bytes_write=3500856 bytes_read=1704759 bytes_retransmit=9 bytes_invalid=0 send_seq=94566 receive_seq=94566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=736189 sysload=0.09 cputime=229.893 memavail=1634992 print_time=4327.516 buffer_time=2.048 print_stall=10 extruder: target=215 temp=215.1 pwm=0.458
Stats 4317.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000069 bytes_write=3502454 bytes_read=1705206 bytes_retransmit=9 bytes_invalid=0 send_seq=94599 receive_seq=94598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.237 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=736512 sysload=0.09 cputime=229.950 memavail=1634964 print_time=4328.793 buffer_time=2.323 print_stall=10 extruder: target=215 temp=215.0 pwm=0.458
Stats 4318.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000069 bytes_write=3503469 bytes_read=1705662 bytes_retransmit=9 bytes_invalid=0 send_seq=94624 receive_seq=94623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.435 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=736642 sysload=0.09 cputime=230.018 memavail=1634704 print_time=4329.823 buffer_time=2.351 print_stall=10 extruder: target=215 temp=215.1 pwm=0.458
Stats 4319.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000069 bytes_write=3504595 bytes_read=1706094 bytes_retransmit=9 bytes_invalid=0 send_seq=94653 receive_seq=94652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.214 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=736807 sysload=0.17 cputime=230.087 memavail=1634216 print_time=4331.033 buffer_time=2.559 print_stall=10 extruder: target=215 temp=215.2 pwm=0.377
Stats 4320.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000069 bytes_write=3505246 bytes_read=1706486 bytes_retransmit=9 bytes_invalid=0 send_seq=94674 receive_seq=94673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.595 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=736873 sysload=0.17 cputime=230.148 memavail=1634460 print_time=4331.683 buffer_time=2.209 print_stall=10 extruder: target=215 temp=215.1 pwm=0.440
Stats 4321.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3506283 bytes_read=1706962 bytes_retransmit=9 bytes_invalid=0 send_seq=94700 receive_seq=94699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.8 pwm=0.880 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=737032 sysload=0.17 cputime=230.215 memavail=1634440 print_time=4333.080 buffer_time=2.604 print_stall=10 extruder: target=215 temp=215.1 pwm=0.440
Stats 4322.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3506874 bytes_read=1707349 bytes_retransmit=9 bytes_invalid=0 send_seq=94719 receive_seq=94719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.444 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=737097 sysload=0.17 cputime=230.274 memavail=1634464 print_time=4333.815 buffer_time=2.338 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 4323.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3507536 bytes_read=1707756 bytes_retransmit=9 bytes_invalid=0 send_seq=94740 receive_seq=94740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=737161 sysload=0.17 cputime=230.333 memavail=1634724 print_time=4334.572 buffer_time=2.093 print_stall=10 extruder: target=215 temp=215.1 pwm=0.460
Stats 4324.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3508640 bytes_read=1708207 bytes_retransmit=9 bytes_invalid=0 send_seq=94768 receive_seq=94767 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=737323 sysload=0.15 cputime=230.397 memavail=1634700 print_time=4336.156 buffer_time=2.677 print_stall=10 extruder: target=215 temp=215.2 pwm=0.409
Stats 4325.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3509240 bytes_read=1708599 bytes_retransmit=9 bytes_invalid=0 send_seq=94788 receive_seq=94788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=737388 sysload=0.15 cputime=230.461 memavail=1634244 print_time=4336.978 buffer_time=2.497 print_stall=10 extruder: target=215 temp=215.1 pwm=0.432
Stats 4326.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3509932 bytes_read=1709011 bytes_retransmit=9 bytes_invalid=0 send_seq=94807 receive_seq=94807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.014 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=737451 sysload=0.15 cputime=230.509 memavail=1634196 print_time=4337.814 buffer_time=2.333 print_stall=10 extruder: target=215 temp=215.0 pwm=0.507
Stats 4327.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3510571 bytes_read=1709422 bytes_retransmit=9 bytes_invalid=0 send_seq=94826 receive_seq=94826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=737517 sysload=0.15 cputime=230.562 memavail=1634536 print_time=4338.667 buffer_time=2.183 print_stall=10 extruder: target=215 temp=215.1 pwm=0.454
Stats 4328.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3511271 bytes_read=1709819 bytes_retransmit=9 bytes_invalid=0 send_seq=94848 receive_seq=94848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=737581 sysload=0.15 cputime=230.623 memavail=1634856 print_time=4339.535 buffer_time=2.050 print_stall=10 extruder: target=215 temp=215.0 pwm=0.490
Stats 4329.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3512374 bytes_read=1710256 bytes_retransmit=9 bytes_invalid=0 send_seq=94875 receive_seq=94875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.082 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=737741 sysload=0.14 cputime=230.691 memavail=1634596 print_time=4341.317 buffer_time=2.831 print_stall=10 extruder: target=215 temp=215.0 pwm=0.489
Stats 4330.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3513072 bytes_read=1710677 bytes_retransmit=9 bytes_invalid=0 send_seq=94896 receive_seq=94896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.456 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=737839 sysload=0.14 cputime=230.741 memavail=1634352 print_time=4342.224 buffer_time=2.737 print_stall=10 extruder: target=215 temp=215.0 pwm=0.433
Stats 4331.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3513732 bytes_read=1711074 bytes_retransmit=9 bytes_invalid=0 send_seq=94915 receive_seq=94915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.169 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=737903 sysload=0.14 cputime=230.793 memavail=1634596 print_time=4343.140 buffer_time=2.651 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 4332.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3514493 bytes_read=1711481 bytes_retransmit=9 bytes_invalid=0 send_seq=94937 receive_seq=94936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=737968 sysload=0.14 cputime=230.856 memavail=1634840 print_time=4344.067 buffer_time=2.575 print_stall=10 extruder: target=215 temp=215.1 pwm=0.396
Stats 4333.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3515161 bytes_read=1711897 bytes_retransmit=9 bytes_invalid=0 send_seq=94957 receive_seq=94956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=738030 sysload=0.14 cputime=230.917 memavail=1634860 print_time=4345.003 buffer_time=2.509 print_stall=10 extruder: target=215 temp=214.9 pwm=0.477
Stats 4334.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3515778 bytes_read=1712284 bytes_retransmit=9 bytes_invalid=0 send_seq=94976 receive_seq=94976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=738128 sysload=0.13 cputime=230.981 memavail=1634924 print_time=4345.960 buffer_time=2.465 print_stall=10 extruder: target=215 temp=214.9 pwm=0.560
Stats 4335.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3516525 bytes_read=1712696 bytes_retransmit=9 bytes_invalid=0 send_seq=94998 receive_seq=94998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=738159 sysload=0.13 cputime=231.042 memavail=1634916 print_time=4346.657 buffer_time=2.160 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 4336.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3517243 bytes_read=1713137 bytes_retransmit=9 bytes_invalid=0 send_seq=95020 receive_seq=95020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.173 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=738223 sysload=0.13 cputime=231.097 memavail=1634180 print_time=4347.609 buffer_time=2.112 print_stall=10 extruder: target=215 temp=214.9 pwm=0.460
Stats 4337.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3517932 bytes_read=1713524 bytes_retransmit=9 bytes_invalid=0 send_seq=95040 receive_seq=95040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.086 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=738288 sysload=0.13 cputime=231.150 memavail=1634196 print_time=4348.566 buffer_time=2.066 print_stall=10 extruder: target=215 temp=215.0 pwm=0.460
Stats 4338.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3518645 bytes_read=1713926 bytes_retransmit=9 bytes_invalid=0 send_seq=95060 receive_seq=95060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=738417 sysload=0.13 cputime=231.212 memavail=1634144 print_time=4349.788 buffer_time=2.284 print_stall=10 extruder: target=215 temp=215.0 pwm=0.460
Stats 4339.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3519356 bytes_read=1714352 bytes_retransmit=9 bytes_invalid=0 send_seq=95082 receive_seq=95082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=738480 sysload=0.12 cputime=231.276 memavail=1634128 print_time=4350.759 buffer_time=2.251 print_stall=10 extruder: target=215 temp=215.2 pwm=0.343
Stats 4340.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3520079 bytes_read=1714744 bytes_retransmit=9 bytes_invalid=0 send_seq=95103 receive_seq=95103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=738578 sysload=0.12 cputime=231.340 memavail=1633876 print_time=4351.743 buffer_time=2.230 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 4341.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3520764 bytes_read=1715176 bytes_retransmit=9 bytes_invalid=0 send_seq=95123 receive_seq=95123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=738642 sysload=0.12 cputime=231.406 memavail=1633856 print_time=4352.712 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.0 pwm=0.467
Stats 4342.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3521414 bytes_read=1715577 bytes_retransmit=9 bytes_invalid=0 send_seq=95143 receive_seq=95143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.475 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=738708 sysload=0.12 cputime=231.467 memavail=1633640 print_time=4353.689 buffer_time=2.172 print_stall=10 extruder: target=215 temp=215.0 pwm=0.467
Stats 4343.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3522081 bytes_read=1715959 bytes_retransmit=9 bytes_invalid=0 send_seq=95162 receive_seq=95162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=738771 sysload=0.12 cputime=231.529 memavail=1633624 print_time=4354.666 buffer_time=2.146 print_stall=10 extruder: target=215 temp=215.1 pwm=0.419
Stats 4344.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3522824 bytes_read=1716384 bytes_retransmit=9 bytes_invalid=0 send_seq=95184 receive_seq=95184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=738836 sysload=0.11 cputime=231.592 memavail=1633600 print_time=4355.643 buffer_time=2.114 print_stall=10 extruder: target=215 temp=215.0 pwm=0.530
Stats 4345.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3523511 bytes_read=1716789 bytes_retransmit=9 bytes_invalid=0 send_seq=95207 receive_seq=95207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=738900 sysload=0.11 cputime=231.652 memavail=1633872 print_time=4356.620 buffer_time=2.091 print_stall=10 extruder: target=215 temp=214.9 pwm=0.551
Stats 4346.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3524230 bytes_read=1717176 bytes_retransmit=9 bytes_invalid=0 send_seq=95229 receive_seq=95229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=738996 sysload=0.11 cputime=231.706 memavail=1634172 print_time=4357.604 buffer_time=2.075 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 4347.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3524957 bytes_read=1717606 bytes_retransmit=9 bytes_invalid=0 send_seq=95251 receive_seq=95251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=57.9 mcu_temp: temp=41.4 sd_pos=739060 sysload=0.11 cputime=231.755 memavail=1634080 print_time=4358.569 buffer_time=2.039 print_stall=10 extruder: target=215 temp=214.8 pwm=0.598
Stats 4348.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3525624 bytes_read=1718000 bytes_retransmit=9 bytes_invalid=0 send_seq=95271 receive_seq=95271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=739124 sysload=0.11 cputime=231.809 memavail=1634080 print_time=4359.537 buffer_time=2.007 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 4349.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3526680 bytes_read=1718412 bytes_retransmit=9 bytes_invalid=0 send_seq=95296 receive_seq=95296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=739221 sysload=0.10 cputime=231.875 memavail=1634080 print_time=4361.207 buffer_time=2.675 print_stall=10 extruder: target=215 temp=215.0 pwm=0.439
Stats 4350.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3527437 bytes_read=1718839 bytes_retransmit=9 bytes_invalid=0 send_seq=95318 receive_seq=95318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=739284 sysload=0.10 cputime=231.943 memavail=1634092 print_time=4362.166 buffer_time=2.630 print_stall=10 extruder: target=215 temp=214.8 pwm=0.515
Stats 4351.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3528104 bytes_read=1719245 bytes_retransmit=9 bytes_invalid=0 send_seq=95339 receive_seq=95339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=739413 sysload=0.10 cputime=232.005 memavail=1634124 print_time=4363.368 buffer_time=2.832 print_stall=10 extruder: target=215 temp=214.9 pwm=0.463
Stats 4352.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3528773 bytes_read=1719652 bytes_retransmit=9 bytes_invalid=0 send_seq=95360 receive_seq=95360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=739477 sysload=0.10 cputime=232.067 memavail=1634352 print_time=4364.303 buffer_time=2.767 print_stall=10 extruder: target=215 temp=215.1 pwm=0.377
Stats 4353.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3529501 bytes_read=1720079 bytes_retransmit=9 bytes_invalid=0 send_seq=95382 receive_seq=95382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=739542 sysload=0.10 cputime=232.133 memavail=1634324 print_time=4365.233 buffer_time=2.696 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 4354.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3530218 bytes_read=1720495 bytes_retransmit=9 bytes_invalid=0 send_seq=95405 receive_seq=95405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=739605 sysload=0.09 cputime=232.197 memavail=1634344 print_time=4366.154 buffer_time=2.616 print_stall=10 extruder: target=215 temp=215.1 pwm=0.409
Stats 4355.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3530915 bytes_read=1720887 bytes_retransmit=9 bytes_invalid=0 send_seq=95426 receive_seq=95426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=739671 sysload=0.09 cputime=232.261 memavail=1634352 print_time=4367.064 buffer_time=2.525 print_stall=10 extruder: target=215 temp=215.1 pwm=0.465
Stats 4356.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3531579 bytes_read=1721304 bytes_retransmit=9 bytes_invalid=0 send_seq=95446 receive_seq=95446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.497 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=739765 sysload=0.09 cputime=232.323 memavail=1634084 print_time=4367.965 buffer_time=2.425 print_stall=10 extruder: target=215 temp=215.1 pwm=0.465
Stats 4357.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3532353 bytes_read=1721740 bytes_retransmit=9 bytes_invalid=0 send_seq=95470 receive_seq=95470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.060 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=739831 sysload=0.09 cputime=232.382 memavail=1634104 print_time=4368.853 buffer_time=2.313 print_stall=10 extruder: target=215 temp=215.0 pwm=0.499
Stats 4358.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3533014 bytes_read=1722122 bytes_retransmit=9 bytes_invalid=0 send_seq=95489 receive_seq=95489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=739895 sysload=0.09 cputime=232.439 memavail=1634328 print_time=4369.727 buffer_time=2.186 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 4359.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3533715 bytes_read=1722554 bytes_retransmit=9 bytes_invalid=0 send_seq=95512 receive_seq=95512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=739961 sysload=0.08 cputime=232.500 memavail=1634380 print_time=4370.585 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.0 pwm=0.529
Stats 4360.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3534782 bytes_read=1722990 bytes_retransmit=9 bytes_invalid=0 send_seq=95539 receive_seq=95539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=740124 sysload=0.08 cputime=232.559 memavail=1634136 print_time=4372.255 buffer_time=2.713 print_stall=10 extruder: target=215 temp=214.9 pwm=0.542
Stats 4361.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3535420 bytes_read=1723372 bytes_retransmit=9 bytes_invalid=0 send_seq=95558 receive_seq=95558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=740187 sysload=0.08 cputime=232.602 memavail=1634120 print_time=4373.064 buffer_time=2.521 print_stall=10 extruder: target=215 temp=214.9 pwm=0.542
Stats 4362.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3536137 bytes_read=1723814 bytes_retransmit=9 bytes_invalid=0 send_seq=95580 receive_seq=95580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.523 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=740285 sysload=0.08 cputime=232.658 memavail=1633856 print_time=4373.853 buffer_time=2.309 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 4363.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3536813 bytes_read=1724225 bytes_retransmit=9 bytes_invalid=0 send_seq=95602 receive_seq=95602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=740349 sysload=0.08 cputime=232.716 memavail=1633880 print_time=4374.619 buffer_time=2.074 print_stall=10 extruder: target=215 temp=214.9 pwm=0.554
Stats 4364.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3537812 bytes_read=1724637 bytes_retransmit=9 bytes_invalid=0 send_seq=95627 receive_seq=95627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=740507 sysload=0.08 cputime=232.765 memavail=1633608 print_time=4376.101 buffer_time=2.555 print_stall=10 extruder: target=215 temp=215.1 pwm=0.432
Stats 4365.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3538484 bytes_read=1725059 bytes_retransmit=9 bytes_invalid=0 send_seq=95648 receive_seq=95648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=740570 sysload=0.08 cputime=232.808 memavail=1633628 print_time=4376.774 buffer_time=2.228 print_stall=10 extruder: target=215 temp=215.1 pwm=0.472
Stats 4366.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3539466 bytes_read=1725490 bytes_retransmit=9 bytes_invalid=0 send_seq=95674 receive_seq=95674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=740697 sysload=0.08 cputime=232.854 memavail=1634640 print_time=4378.066 buffer_time=2.519 print_stall=10 extruder: target=215 temp=215.1 pwm=0.406
Stats 4367.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3540237 bytes_read=1725907 bytes_retransmit=9 bytes_invalid=0 send_seq=95697 receive_seq=95697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.441 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=740792 sysload=0.08 cputime=232.899 memavail=1634404 print_time=4378.679 buffer_time=2.132 print_stall=10 extruder: target=215 temp=215.0 pwm=0.451
Stats 4368.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3541246 bytes_read=1726349 bytes_retransmit=9 bytes_invalid=0 send_seq=95722 receive_seq=95722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=740918 sysload=0.08 cputime=232.959 memavail=1634144 print_time=4379.728 buffer_time=2.181 print_stall=10 extruder: target=215 temp=214.9 pwm=0.592
Stats 4369.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3542320 bytes_read=1726801 bytes_retransmit=9 bytes_invalid=0 send_seq=95750 receive_seq=95750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.441 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=741075 sysload=0.07 cputime=233.022 memavail=1634128 print_time=4380.592 buffer_time=2.043 print_stall=10 extruder: target=215 temp=215.0 pwm=0.446
Stats 4370.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3544053 bytes_read=1727273 bytes_retransmit=9 bytes_invalid=0 send_seq=95787 receive_seq=95787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.413 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=741496 sysload=0.07 cputime=233.085 memavail=1634136 print_time=4381.694 buffer_time=2.145 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 4371.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3545202 bytes_read=1727725 bytes_retransmit=9 bytes_invalid=0 send_seq=95814 receive_seq=95814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=741973 sysload=0.07 cputime=233.148 memavail=1634376 print_time=4382.764 buffer_time=2.215 print_stall=10 extruder: target=215 temp=215.2 pwm=0.411
Stats 4372.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3545874 bytes_read=1728136 bytes_retransmit=9 bytes_invalid=0 send_seq=95833 receive_seq=95833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.669 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=742413 sysload=0.07 cputime=233.205 memavail=1634640 print_time=4383.700 buffer_time=2.149 print_stall=10 extruder: target=215 temp=215.1 pwm=0.426
Stats 4373.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3546504 bytes_read=1728513 bytes_retransmit=9 bytes_invalid=0 send_seq=95851 receive_seq=95851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.458 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=742895 sysload=0.07 cputime=233.269 memavail=1634640 print_time=4384.621 buffer_time=2.070 print_stall=10 extruder: target=215 temp=215.1 pwm=0.500
Stats 4374.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3547192 bytes_read=1728930 bytes_retransmit=9 bytes_invalid=0 send_seq=95871 receive_seq=95871 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=743384 sysload=0.06 cputime=233.330 memavail=1634384 print_time=4385.612 buffer_time=2.060 print_stall=10 extruder: target=215 temp=215.1 pwm=0.443
Stats 4375.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3548073 bytes_read=1729351 bytes_retransmit=9 bytes_invalid=0 send_seq=95895 receive_seq=95895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=743967 sysload=0.06 cputime=233.387 memavail=1634392 print_time=4386.772 buffer_time=2.220 print_stall=10 extruder: target=215 temp=215.2 pwm=0.465
Stats 4376.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3548762 bytes_read=1729738 bytes_retransmit=9 bytes_invalid=0 send_seq=95915 receive_seq=95915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=744442 sysload=0.06 cputime=233.449 memavail=1634388 print_time=4387.791 buffer_time=2.238 print_stall=10 extruder: target=215 temp=215.1 pwm=0.465
Stats 4377.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3549474 bytes_read=1730180 bytes_retransmit=9 bytes_invalid=0 send_seq=95937 receive_seq=95937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=744825 sysload=0.06 cputime=233.515 memavail=1634388 print_time=4388.626 buffer_time=2.072 print_stall=10 extruder: target=215 temp=215.1 pwm=0.494
Stats 4378.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3550122 bytes_read=1730576 bytes_retransmit=9 bytes_invalid=0 send_seq=95956 receive_seq=95956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=745315 sysload=0.06 cputime=233.578 memavail=1634620 print_time=4389.645 buffer_time=2.091 print_stall=10 extruder: target=215 temp=215.1 pwm=0.451
Stats 4379.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3550810 bytes_read=1730958 bytes_retransmit=9 bytes_invalid=0 send_seq=95975 receive_seq=95975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=745804 sysload=0.06 cputime=233.638 memavail=1634900 print_time=4390.664 buffer_time=2.109 print_stall=10 extruder: target=215 temp=215.2 pwm=0.451
Stats 4380.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3551647 bytes_read=1731395 bytes_retransmit=9 bytes_invalid=0 send_seq=95999 receive_seq=95999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=746287 sysload=0.06 cputime=233.699 memavail=1634924 print_time=4391.681 buffer_time=2.125 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 4381.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3552277 bytes_read=1731786 bytes_retransmit=9 bytes_invalid=0 send_seq=96018 receive_seq=96017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=746667 sysload=0.06 cputime=233.761 memavail=1634648 print_time=4392.824 buffer_time=2.268 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 4382.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3552898 bytes_read=1732198 bytes_retransmit=9 bytes_invalid=0 send_seq=96039 receive_seq=96039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=746919 sysload=0.06 cputime=233.819 memavail=1634648 print_time=4393.599 buffer_time=2.043 print_stall=10 extruder: target=215 temp=215.2 pwm=0.388
Stats 4383.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3553471 bytes_read=1732610 bytes_retransmit=9 bytes_invalid=0 send_seq=96058 receive_seq=96058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=747303 sysload=0.06 cputime=233.885 memavail=1634400 print_time=4394.646 buffer_time=2.089 print_stall=10 extruder: target=215 temp=215.1 pwm=0.471
Stats 4384.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3554090 bytes_read=1733001 bytes_retransmit=9 bytes_invalid=0 send_seq=96076 receive_seq=96076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=747661 sysload=0.22 cputime=233.946 memavail=1634148 print_time=4395.692 buffer_time=2.135 print_stall=10 extruder: target=215 temp=215.0 pwm=0.550
Stats 4385.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3554750 bytes_read=1733383 bytes_retransmit=9 bytes_invalid=0 send_seq=96095 receive_seq=96095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=748020 sysload=0.22 cputime=234.005 memavail=1633836 print_time=4396.739 buffer_time=2.180 print_stall=10 extruder: target=215 temp=215.1 pwm=0.418
Stats 4386.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3555689 bytes_read=1733820 bytes_retransmit=9 bytes_invalid=0 send_seq=96119 receive_seq=96119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.529 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=748417 sysload=0.22 cputime=234.056 memavail=1634340 print_time=4397.681 buffer_time=2.122 print_stall=10 extruder: target=215 temp=215.0 pwm=0.526
Stats 4387.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3556994 bytes_read=1734286 bytes_retransmit=9 bytes_invalid=0 send_seq=96149 receive_seq=96149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=748638 sysload=0.22 cputime=234.098 memavail=1634416 print_time=4398.855 buffer_time=2.294 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 4388.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3558112 bytes_read=1734718 bytes_retransmit=9 bytes_invalid=0 send_seq=96178 receive_seq=96178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=748765 sysload=0.22 cputime=234.141 memavail=1634400 print_time=4399.892 buffer_time=2.330 print_stall=10 extruder: target=215 temp=214.9 pwm=0.542
Stats 4389.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3559169 bytes_read=1735165 bytes_retransmit=9 bytes_invalid=0 send_seq=96204 receive_seq=96204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=748892 sysload=0.20 cputime=234.186 memavail=1634408 print_time=4401.098 buffer_time=2.536 print_stall=10 extruder: target=215 temp=215.1 pwm=0.465
Stats 4390.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3559843 bytes_read=1735571 bytes_retransmit=9 bytes_invalid=0 send_seq=96225 receive_seq=96225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=748955 sysload=0.20 cputime=234.245 memavail=1634396 print_time=4401.748 buffer_time=2.185 print_stall=10 extruder: target=215 temp=215.3 pwm=0.298
Stats 4391.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3560787 bytes_read=1735983 bytes_retransmit=9 bytes_invalid=0 send_seq=96250 receive_seq=96250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=749109 sysload=0.20 cputime=234.295 memavail=1634160 print_time=4403.142 buffer_time=2.579 print_stall=10 extruder: target=215 temp=215.0 pwm=0.550
Stats 4392.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3561486 bytes_read=1736420 bytes_retransmit=9 bytes_invalid=0 send_seq=96271 receive_seq=96271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=749175 sysload=0.20 cputime=234.348 memavail=1634168 print_time=4403.876 buffer_time=2.312 print_stall=10 extruder: target=215 temp=215.0 pwm=0.482
Stats 4393.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3562185 bytes_read=1736831 bytes_retransmit=9 bytes_invalid=0 send_seq=96293 receive_seq=96293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.095 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=749239 sysload=0.20 cputime=234.390 memavail=1634376 print_time=4404.632 buffer_time=2.068 print_stall=10 extruder: target=215 temp=215.2 pwm=0.390
Stats 4394.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3563182 bytes_read=1737248 bytes_retransmit=9 bytes_invalid=0 send_seq=96319 receive_seq=96319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=749401 sysload=0.18 cputime=234.442 memavail=1634940 print_time=4406.226 buffer_time=2.661 print_stall=10 extruder: target=215 temp=215.1 pwm=0.522
Stats 4395.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3563883 bytes_read=1737680 bytes_retransmit=9 bytes_invalid=0 send_seq=96342 receive_seq=96342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=749467 sysload=0.18 cputime=234.495 memavail=1634672 print_time=4407.032 buffer_time=2.467 print_stall=10 extruder: target=215 temp=215.2 pwm=0.370
Stats 4396.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3564581 bytes_read=1738091 bytes_retransmit=9 bytes_invalid=0 send_seq=96364 receive_seq=96364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.086 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=749562 sysload=0.18 cputime=234.537 memavail=1634352 print_time=4407.867 buffer_time=2.301 print_stall=10 extruder: target=215 temp=215.1 pwm=0.543
Stats 4397.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3565244 bytes_read=1738503 bytes_retransmit=9 bytes_invalid=0 send_seq=96386 receive_seq=96386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=749628 sysload=0.18 cputime=234.576 memavail=1634096 print_time=4408.718 buffer_time=2.151 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 4398.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3565853 bytes_read=1738924 bytes_retransmit=9 bytes_invalid=0 send_seq=96404 receive_seq=96404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=749691 sysload=0.18 cputime=234.626 memavail=1634040 print_time=4409.584 buffer_time=2.016 print_stall=10 extruder: target=215 temp=215.1 pwm=0.470
Stats 4399.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3566923 bytes_read=1739346 bytes_retransmit=9 bytes_invalid=0 send_seq=96431 receive_seq=96431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=749853 sysload=0.25 cputime=234.682 memavail=1633912 print_time=4411.360 buffer_time=2.792 print_stall=10 extruder: target=215 temp=215.0 pwm=0.534
Stats 4400.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3567567 bytes_read=1739743 bytes_retransmit=9 bytes_invalid=0 send_seq=96453 receive_seq=96453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=749918 sysload=0.25 cputime=234.733 memavail=1634364 print_time=4412.264 buffer_time=2.695 print_stall=10 extruder: target=215 temp=215.0 pwm=0.455
Stats 4401.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3568284 bytes_read=1740199 bytes_retransmit=9 bytes_invalid=0 send_seq=96475 receive_seq=96475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=749981 sysload=0.25 cputime=234.788 memavail=1634040 print_time=4413.178 buffer_time=2.609 print_stall=10 extruder: target=215 temp=215.1 pwm=0.413
Stats 4402.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3568955 bytes_read=1740591 bytes_retransmit=9 bytes_invalid=0 send_seq=96496 receive_seq=96496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=750047 sysload=0.25 cputime=234.841 memavail=1634548 print_time=4414.102 buffer_time=2.533 print_stall=10 extruder: target=215 temp=214.8 pwm=0.515
Stats 4403.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3569655 bytes_read=1740988 bytes_retransmit=9 bytes_invalid=0 send_seq=96518 receive_seq=96518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=750111 sysload=0.25 cputime=234.896 memavail=1634136 print_time=4415.036 buffer_time=2.465 print_stall=10 extruder: target=215 temp=214.8 pwm=0.513
Stats 4404.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3570339 bytes_read=1741423 bytes_retransmit=9 bytes_invalid=0 send_seq=96540 receive_seq=96540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=750210 sysload=0.23 cputime=234.949 memavail=1633984 print_time=4415.985 buffer_time=2.415 print_stall=10 extruder: target=215 temp=214.9 pwm=0.521
Stats 4405.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3571028 bytes_read=1741805 bytes_retransmit=9 bytes_invalid=0 send_seq=96561 receive_seq=96561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=750273 sysload=0.23 cputime=235.000 memavail=1633844 print_time=4416.927 buffer_time=2.356 print_stall=10 extruder: target=215 temp=214.9 pwm=0.524
Stats 4406.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3571685 bytes_read=1742187 bytes_retransmit=9 bytes_invalid=0 send_seq=96582 receive_seq=96582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=750339 sysload=0.23 cputime=235.051 memavail=1634056 print_time=4417.881 buffer_time=2.308 print_stall=10 extruder: target=215 temp=214.9 pwm=0.465
Stats 4407.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3572408 bytes_read=1742630 bytes_retransmit=9 bytes_invalid=0 send_seq=96604 receive_seq=96604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=750402 sysload=0.23 cputime=235.098 memavail=1634204 print_time=4418.839 buffer_time=2.266 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 4408.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3573041 bytes_read=1743011 bytes_retransmit=9 bytes_invalid=0 send_seq=96623 receive_seq=96623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=750464 sysload=0.23 cputime=235.141 memavail=1634324 print_time=4419.802 buffer_time=2.228 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 4409.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3573710 bytes_read=1743398 bytes_retransmit=9 bytes_invalid=0 send_seq=96643 receive_seq=96643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.374 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=750524 sysload=0.21 cputime=235.192 memavail=1634624 print_time=4420.770 buffer_time=2.195 print_stall=10 extruder: target=215 temp=215.1 pwm=0.381
Stats 4410.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3574399 bytes_read=1743829 bytes_retransmit=9 bytes_invalid=0 send_seq=96663 receive_seq=96663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=750590 sysload=0.21 cputime=235.245 memavail=1634568 print_time=4421.743 buffer_time=2.167 print_stall=10 extruder: target=215 temp=214.9 pwm=0.466
Stats 4411.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3575081 bytes_read=1744221 bytes_retransmit=9 bytes_invalid=0 send_seq=96684 receive_seq=96684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=750653 sysload=0.21 cputime=235.296 memavail=1634024 print_time=4422.715 buffer_time=2.139 print_stall=10 extruder: target=215 temp=214.8 pwm=0.536
Stats 4412.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3575765 bytes_read=1744628 bytes_retransmit=9 bytes_invalid=0 send_seq=96705 receive_seq=96705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=750718 sysload=0.21 cputime=235.347 memavail=1633744 print_time=4423.688 buffer_time=2.111 print_stall=10 extruder: target=215 temp=214.9 pwm=0.447
Stats 4413.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3576484 bytes_read=1745069 bytes_retransmit=9 bytes_invalid=0 send_seq=96727 receive_seq=96727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.481 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=750780 sysload=0.21 cputime=235.400 memavail=1633976 print_time=4424.660 buffer_time=2.083 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 4414.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3577168 bytes_read=1745466 bytes_retransmit=9 bytes_invalid=0 send_seq=96749 receive_seq=96749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=750845 sysload=0.19 cputime=235.450 memavail=1633712 print_time=4425.633 buffer_time=2.055 print_stall=10 extruder: target=215 temp=215.1 pwm=0.384
Stats 4415.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3577872 bytes_read=1745888 bytes_retransmit=9 bytes_invalid=0 send_seq=96773 receive_seq=96773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=750909 sysload=0.19 cputime=235.501 memavail=1633956 print_time=4426.605 buffer_time=2.026 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 4416.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3578889 bytes_read=1746349 bytes_retransmit=9 bytes_invalid=0 send_seq=96799 receive_seq=96799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=751037 sysload=0.19 cputime=235.554 memavail=1634220 print_time=4428.546 buffer_time=2.963 print_stall=10 extruder: target=215 temp=215.1 pwm=0.471
Stats 4417.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3579557 bytes_read=1746736 bytes_retransmit=9 bytes_invalid=0 send_seq=96819 receive_seq=96819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.372 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=751102 sysload=0.19 cputime=235.606 memavail=1633724 print_time=4429.509 buffer_time=2.926 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 4418.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3580248 bytes_read=1747148 bytes_retransmit=9 bytes_invalid=0 send_seq=96841 receive_seq=96841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.381 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=751166 sysload=0.19 cputime=235.661 memavail=1633668 print_time=4430.467 buffer_time=2.883 print_stall=10 extruder: target=215 temp=215.0 pwm=0.461
Stats 4419.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3580936 bytes_read=1747574 bytes_retransmit=9 bytes_invalid=0 send_seq=96863 receive_seq=96863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.468 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=751232 sysload=0.18 cputime=235.716 memavail=1633820 print_time=4431.420 buffer_time=2.836 print_stall=10 extruder: target=215 temp=214.9 pwm=0.511
Stats 4420.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3581587 bytes_read=1747971 bytes_retransmit=9 bytes_invalid=0 send_seq=96885 receive_seq=96885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=751328 sysload=0.18 cputime=235.767 memavail=1633680 print_time=4432.368 buffer_time=2.784 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
Stats 4421.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3582331 bytes_read=1748393 bytes_retransmit=9 bytes_invalid=0 send_seq=96909 receive_seq=96909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=751393 sysload=0.18 cputime=235.823 memavail=1633476 print_time=4433.311 buffer_time=2.726 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 4422.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=3583022 bytes_read=1748834 bytes_retransmit=9 bytes_invalid=0 send_seq=96931 receive_seq=96931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.512 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=751456 sysload=0.18 cputime=235.877 memavail=1633556 print_time=4434.244 buffer_time=2.659 print_stall=10 extruder: target=215 temp=214.9 pwm=0.567
Stats 4423.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=3583706 bytes_read=1749236 bytes_retransmit=9 bytes_invalid=0 send_seq=96954 receive_seq=96954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.607 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=751522 sysload=0.18 cputime=235.930 memavail=1633800 print_time=4435.167 buffer_time=2.582 print_stall=10 extruder: target=215 temp=215.1 pwm=0.408
Stats 4424.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=3584371 bytes_read=1749643 bytes_retransmit=9 bytes_invalid=0 send_seq=96975 receive_seq=96975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=751586 sysload=0.16 cputime=235.982 memavail=1633924 print_time=4436.081 buffer_time=2.495 print_stall=10 extruder: target=215 temp=215.0 pwm=0.453
Stats 4425.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=3585133 bytes_read=1750079 bytes_retransmit=9 bytes_invalid=0 send_seq=96999 receive_seq=96999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=751651 sysload=0.16 cputime=236.038 memavail=1633920 print_time=4436.985 buffer_time=2.398 print_stall=10 extruder: target=215 temp=215.1 pwm=0.389
Stats 4426.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=3585802 bytes_read=1750466 bytes_retransmit=9 bytes_invalid=0 send_seq=97019 receive_seq=97019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=751744 sysload=0.16 cputime=236.091 memavail=1633944 print_time=4437.894 buffer_time=2.307 print_stall=10 extruder: target=215 temp=214.9 pwm=0.514
Stats 4427.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3586459 bytes_read=1750883 bytes_retransmit=9 bytes_invalid=0 send_seq=97039 receive_seq=97039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.483 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=751809 sysload=0.16 cputime=236.131 memavail=1633612 print_time=4438.759 buffer_time=2.172 print_stall=10 extruder: target=215 temp=215.0 pwm=0.490
Stats 4428.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3587145 bytes_read=1751304 bytes_retransmit=9 bytes_invalid=0 send_seq=97060 receive_seq=97060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=751873 sysload=0.16 cputime=236.184 memavail=1633648 print_time=4439.625 buffer_time=2.036 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
Stats 4429.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3588190 bytes_read=1751731 bytes_retransmit=9 bytes_invalid=0 send_seq=97088 receive_seq=97088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.562 rpi: temp=57.5 mcu_temp: temp=41.4 sd_pos=752003 sysload=0.15 cputime=236.240 memavail=1633292 print_time=4441.309 buffer_time=2.720 print_stall=10 extruder: target=215 temp=214.9 pwm=0.539
Stats 4430.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3588908 bytes_read=1752143 bytes_retransmit=9 bytes_invalid=0 send_seq=97111 receive_seq=97110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=752101 sysload=0.15 cputime=236.292 memavail=1633656 print_time=4442.148 buffer_time=2.558 print_stall=10 extruder: target=215 temp=215.0 pwm=0.470
Stats 4431.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3589604 bytes_read=1752580 bytes_retransmit=9 bytes_invalid=0 send_seq=97132 receive_seq=97132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.404 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=752164 sysload=0.15 cputime=236.342 memavail=1633908 print_time=4442.927 buffer_time=2.337 print_stall=10 extruder: target=215 temp=215.1 pwm=0.470
Stats 4432.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3590209 bytes_read=1752972 bytes_retransmit=9 bytes_invalid=0 send_seq=97150 receive_seq=97150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.546 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=752230 sysload=0.15 cputime=236.395 memavail=1634136 print_time=4443.706 buffer_time=2.116 print_stall=10 extruder: target=215 temp=214.9 pwm=0.531
Stats 4433.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3591237 bytes_read=1753404 bytes_retransmit=9 bytes_invalid=0 send_seq=97176 receive_seq=97176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.206 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=752360 sysload=0.15 cputime=236.448 memavail=1634116 print_time=4445.194 buffer_time=2.604 print_stall=10 extruder: target=215 temp=215.0 pwm=0.457
Stats 4434.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3591857 bytes_read=1753815 bytes_retransmit=9 bytes_invalid=0 send_seq=97195 receive_seq=97195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.256 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=752455 sysload=0.14 cputime=236.501 memavail=1634048 print_time=4445.913 buffer_time=2.322 print_stall=10 extruder: target=215 temp=214.9 pwm=0.516
Stats 4435.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3592849 bytes_read=1754237 bytes_retransmit=9 bytes_invalid=0 send_seq=97222 receive_seq=97222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.168 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=752585 sysload=0.14 cputime=236.547 memavail=1633832 print_time=4447.233 buffer_time=2.641 print_stall=10 extruder: target=215 temp=215.1 pwm=0.397
Stats 4436.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3593557 bytes_read=1754654 bytes_retransmit=9 bytes_invalid=0 send_seq=97245 receive_seq=97245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.053 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=752684 sysload=0.14 cputime=236.582 memavail=1633456 print_time=4447.849 buffer_time=2.257 print_stall=10 extruder: target=215 temp=214.9 pwm=0.575
Stats 4437.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3594657 bytes_read=1755120 bytes_retransmit=9 bytes_invalid=0 send_seq=97272 receive_seq=97272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.411 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=752814 sysload=0.14 cputime=236.627 memavail=1633480 print_time=4448.978 buffer_time=2.386 print_stall=10 extruder: target=215 temp=215.0 pwm=0.430
Stats 4438.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3595668 bytes_read=1755547 bytes_retransmit=9 bytes_invalid=0 send_seq=97300 receive_seq=97300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.379 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=752977 sysload=0.14 cputime=236.685 memavail=1633676 print_time=4449.917 buffer_time=2.325 print_stall=10 extruder: target=215 temp=215.0 pwm=0.450
Stats 4439.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3597157 bytes_read=1756014 bytes_retransmit=9 bytes_invalid=0 send_seq=97333 receive_seq=97333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=753427 sysload=0.13 cputime=236.746 memavail=1633992 print_time=4450.847 buffer_time=2.254 print_stall=10 extruder: target=215 temp=214.9 pwm=0.472
Stats 4440.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3598386 bytes_read=1756480 bytes_retransmit=9 bytes_invalid=0 send_seq=97363 receive_seq=97363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.417 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=753744 sysload=0.13 cputime=236.805 memavail=1634176 print_time=4451.630 buffer_time=2.036 print_stall=10 extruder: target=215 temp=214.9 pwm=0.463
Stats 4441.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3599039 bytes_read=1756862 bytes_retransmit=9 bytes_invalid=0 send_seq=97382 receive_seq=97382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=754218 sysload=0.13 cputime=236.863 memavail=1634216 print_time=4452.616 buffer_time=2.021 print_stall=10 extruder: target=215 temp=215.0 pwm=0.463
Stats 4442.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3599755 bytes_read=1757274 bytes_retransmit=9 bytes_invalid=0 send_seq=97401 receive_seq=97401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=754826 sysload=0.13 cputime=236.929 memavail=1634240 print_time=4453.848 buffer_time=2.253 print_stall=10 extruder: target=215 temp=214.9 pwm=0.463
Stats 4443.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3600667 bytes_read=1757710 bytes_retransmit=9 bytes_invalid=0 send_seq=97425 receive_seq=97425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=755315 sysload=0.13 cputime=236.994 memavail=1634192 print_time=4454.834 buffer_time=2.238 print_stall=10 extruder: target=215 temp=214.7 pwm=0.590
Stats 4444.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3601449 bytes_read=1758107 bytes_retransmit=9 bytes_invalid=0 send_seq=97447 receive_seq=97447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=755772 sysload=0.20 cputime=237.055 memavail=1634240 print_time=4455.735 buffer_time=2.138 print_stall=10 extruder: target=215 temp=214.9 pwm=0.474
Stats 4445.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3602172 bytes_read=1758519 bytes_retransmit=9 bytes_invalid=0 send_seq=97469 receive_seq=97469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=756247 sysload=0.20 cputime=237.116 memavail=1634232 print_time=4456.749 buffer_time=2.152 print_stall=10 extruder: target=215 temp=215.0 pwm=0.393
Stats 4446.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3602811 bytes_read=1758930 bytes_retransmit=9 bytes_invalid=0 send_seq=97488 receive_seq=97488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=756627 sysload=0.20 cputime=237.173 memavail=1634956 print_time=4457.602 buffer_time=2.004 print_stall=10 extruder: target=215 temp=214.9 pwm=0.502
Stats 4447.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=3603456 bytes_read=1759327 bytes_retransmit=9 bytes_invalid=0 send_seq=97507 receive_seq=97507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=757111 sysload=0.20 cputime=237.237 memavail=1635008 print_time=4458.616 buffer_time=2.017 print_stall=10 extruder: target=215 temp=215.0 pwm=0.433
Stats 4448.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=3604284 bytes_read=1759739 bytes_retransmit=9 bytes_invalid=0 send_seq=97529 receive_seq=97529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=757731 sysload=0.20 cputime=237.303 memavail=1634732 print_time=4459.884 buffer_time=2.285 print_stall=10 extruder: target=215 temp=215.0 pwm=0.454
Stats 4449.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=3605027 bytes_read=1760155 bytes_retransmit=9 bytes_invalid=0 send_seq=97549 receive_seq=97549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.234 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=758181 sysload=0.18 cputime=237.360 memavail=1634812 print_time=4460.819 buffer_time=2.220 print_stall=10 extruder: target=215 temp=214.9 pwm=0.513
Stats 4450.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=3605636 bytes_read=1760542 bytes_retransmit=9 bytes_invalid=0 send_seq=97569 receive_seq=97569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=758524 sysload=0.18 cputime=237.418 memavail=1634528 print_time=4461.861 buffer_time=2.261 print_stall=10 extruder: target=215 temp=215.1 pwm=0.403
Stats 4451.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=3606230 bytes_read=1760954 bytes_retransmit=9 bytes_invalid=0 send_seq=97588 receive_seq=97588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.417 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=758870 sysload=0.18 cputime=237.475 memavail=1634292 print_time=4462.903 buffer_time=2.302 print_stall=10 extruder: target=215 temp=215.1 pwm=0.468
Stats 4452.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3606795 bytes_read=1761350 bytes_retransmit=9 bytes_invalid=0 send_seq=97605 receive_seq=97604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.056 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=759249 sysload=0.18 cputime=237.530 memavail=1634288 print_time=4463.944 buffer_time=2.344 print_stall=10 extruder: target=215 temp=215.1 pwm=0.468
Stats 4453.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3607340 bytes_read=1761732 bytes_retransmit=9 bytes_invalid=0 send_seq=97623 receive_seq=97623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=759474 sysload=0.18 cputime=237.587 memavail=1634288 print_time=4464.639 buffer_time=2.038 print_stall=10 extruder: target=215 temp=215.2 pwm=0.387
Stats 4454.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3608072 bytes_read=1762144 bytes_retransmit=9 bytes_invalid=0 send_seq=97645 receive_seq=97645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.457 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=759955 sysload=0.16 cputime=237.647 memavail=1634288 print_time=4466.028 buffer_time=2.426 print_stall=10 extruder: target=215 temp=215.0 pwm=0.552
Stats 4455.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3609055 bytes_read=1762585 bytes_retransmit=9 bytes_invalid=0 send_seq=97670 receive_seq=97670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.8 pwm=0.593 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=760348 sysload=0.16 cputime=237.709 memavail=1634052 print_time=4466.985 buffer_time=2.382 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 4456.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3610172 bytes_read=1763017 bytes_retransmit=9 bytes_invalid=0 send_seq=97699 receive_seq=97699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=760513 sysload=0.16 cputime=237.763 memavail=1634340 print_time=4467.824 buffer_time=2.220 print_stall=10 extruder: target=215 temp=215.2 pwm=0.362
Stats 4457.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3611176 bytes_read=1763459 bytes_retransmit=9 bytes_invalid=0 send_seq=97724 receive_seq=97724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=760643 sysload=0.16 cputime=237.806 memavail=1634372 print_time=4468.852 buffer_time=2.248 print_stall=10 extruder: target=215 temp=215.2 pwm=0.433
Stats 4458.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3612339 bytes_read=1763925 bytes_retransmit=9 bytes_invalid=0 send_seq=97754 receive_seq=97754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=760775 sysload=0.16 cputime=237.867 memavail=1634112 print_time=4470.054 buffer_time=2.449 print_stall=10 extruder: target=215 temp=215.0 pwm=0.578
Stats 4459.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3613048 bytes_read=1764322 bytes_retransmit=9 bytes_invalid=0 send_seq=97776 receive_seq=97776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=760840 sysload=0.15 cputime=237.923 memavail=1634096 print_time=4470.700 buffer_time=2.095 print_stall=10 extruder: target=215 temp=215.3 pwm=0.416
Stats 4460.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3614046 bytes_read=1764744 bytes_retransmit=9 bytes_invalid=0 send_seq=97800 receive_seq=97800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=760997 sysload=0.15 cputime=237.981 memavail=1634088 print_time=4472.089 buffer_time=2.484 print_stall=10 extruder: target=215 temp=215.2 pwm=0.496
Stats 4461.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3614732 bytes_read=1765160 bytes_retransmit=9 bytes_invalid=0 send_seq=97820 receive_seq=97820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.115 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=761059 sysload=0.15 cputime=238.036 memavail=1634132 print_time=4472.820 buffer_time=2.214 print_stall=10 extruder: target=215 temp=215.1 pwm=0.496
Stats 4462.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3615631 bytes_read=1765567 bytes_retransmit=9 bytes_invalid=0 send_seq=97841 receive_seq=97841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=761186 sysload=0.15 cputime=238.094 memavail=1634332 print_time=4474.350 buffer_time=2.742 print_stall=10 extruder: target=215 temp=215.2 pwm=0.376
Stats 4463.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3616331 bytes_read=1765989 bytes_retransmit=9 bytes_invalid=0 send_seq=97862 receive_seq=97862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=761282 sysload=0.15 cputime=238.148 memavail=1634632 print_time=4475.161 buffer_time=2.552 print_stall=10 extruder: target=215 temp=215.0 pwm=0.562
Stats 4464.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3617039 bytes_read=1766385 bytes_retransmit=9 bytes_invalid=0 send_seq=97883 receive_seq=97883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=761347 sysload=0.14 cputime=238.206 memavail=1634664 print_time=4475.965 buffer_time=2.354 print_stall=10 extruder: target=215 temp=214.9 pwm=0.553
Stats 4465.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3617721 bytes_read=1766762 bytes_retransmit=9 bytes_invalid=0 send_seq=97903 receive_seq=97903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=761410 sysload=0.14 cputime=238.258 memavail=1634508 print_time=4476.797 buffer_time=2.185 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 4466.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3618380 bytes_read=1767162 bytes_retransmit=9 bytes_invalid=0 send_seq=97922 receive_seq=97922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=761476 sysload=0.14 cputime=238.307 memavail=1635396 print_time=4477.644 buffer_time=2.032 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 4467.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3619465 bytes_read=1767605 bytes_retransmit=9 bytes_invalid=0 send_seq=97949 receive_seq=97949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.193 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=761638 sysload=0.14 cputime=238.355 memavail=1635128 print_time=4479.386 buffer_time=2.773 print_stall=10 extruder: target=215 temp=215.1 pwm=0.418
Stats 4468.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3620190 bytes_read=1768007 bytes_retransmit=9 bytes_invalid=0 send_seq=97972 receive_seq=97972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=761701 sysload=0.14 cputime=238.415 memavail=1634876 print_time=4480.277 buffer_time=2.663 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 4469.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3620844 bytes_read=1768424 bytes_retransmit=9 bytes_invalid=0 send_seq=97992 receive_seq=97992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=761766 sysload=0.13 cputime=238.472 memavail=1634876 print_time=4481.177 buffer_time=2.562 print_stall=10 extruder: target=215 temp=215.1 pwm=0.473
Stats 4470.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3621621 bytes_read=1768840 bytes_retransmit=9 bytes_invalid=0 send_seq=98015 receive_seq=98015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.503 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=761830 sysload=0.13 cputime=238.533 memavail=1634632 print_time=4482.088 buffer_time=2.472 print_stall=10 extruder: target=215 temp=215.0 pwm=0.461
Stats 4471.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3622336 bytes_read=1769232 bytes_retransmit=9 bytes_invalid=0 send_seq=98036 receive_seq=98036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=761896 sysload=0.13 cputime=238.586 memavail=1634620 print_time=4483.008 buffer_time=2.391 print_stall=10 extruder: target=215 temp=215.0 pwm=0.462
Stats 4472.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3623025 bytes_read=1769669 bytes_retransmit=9 bytes_invalid=0 send_seq=98057 receive_seq=98057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=761958 sysload=0.13 cputime=238.645 memavail=1634556 print_time=4483.938 buffer_time=2.321 print_stall=10 extruder: target=215 temp=214.9 pwm=0.466
Stats 4473.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3623704 bytes_read=1770065 bytes_retransmit=9 bytes_invalid=0 send_seq=98076 receive_seq=98076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=762055 sysload=0.13 cputime=238.699 memavail=1634824 print_time=4484.884 buffer_time=2.265 print_stall=10 extruder: target=215 temp=214.7 pwm=0.613
Stats 4474.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3624416 bytes_read=1770462 bytes_retransmit=9 bytes_invalid=0 send_seq=98098 receive_seq=98098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=762118 sysload=0.12 cputime=238.753 memavail=1635080 print_time=4485.826 buffer_time=2.207 print_stall=10 extruder: target=215 temp=214.9 pwm=0.504
Stats 4475.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3625077 bytes_read=1770874 bytes_retransmit=9 bytes_invalid=0 send_seq=98117 receive_seq=98117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=762183 sysload=0.12 cputime=238.809 memavail=1635304 print_time=4486.775 buffer_time=2.155 print_stall=10 extruder: target=215 temp=214.8 pwm=0.504
Stats 4476.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3625822 bytes_read=1771295 bytes_retransmit=9 bytes_invalid=0 send_seq=98138 receive_seq=98138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=762246 sysload=0.12 cputime=238.857 memavail=1634272 print_time=4487.730 buffer_time=2.109 print_stall=10 extruder: target=215 temp=214.7 pwm=0.550
Stats 4477.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3626636 bytes_read=1771707 bytes_retransmit=9 bytes_invalid=0 send_seq=98163 receive_seq=98163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=762312 sysload=0.12 cputime=238.896 memavail=1634280 print_time=4488.689 buffer_time=2.068 print_stall=10 extruder: target=215 temp=214.9 pwm=0.481
Stats 4478.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3627356 bytes_read=1772139 bytes_retransmit=9 bytes_invalid=0 send_seq=98186 receive_seq=98186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=762408 sysload=0.12 cputime=238.952 memavail=1634520 print_time=4489.653 buffer_time=2.031 print_stall=10 extruder: target=215 temp=214.6 pwm=0.609
Stats 4479.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3628407 bytes_read=1772575 bytes_retransmit=9 bytes_invalid=0 send_seq=98214 receive_seq=98213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=762538 sysload=0.11 cputime=239.011 memavail=1634248 print_time=4491.589 buffer_time=2.963 print_stall=10 extruder: target=215 temp=215.0 pwm=0.434
Stats 4480.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3629081 bytes_read=1772972 bytes_retransmit=9 bytes_invalid=0 send_seq=98235 receive_seq=98235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=762604 sysload=0.11 cputime=239.064 memavail=1634264 print_time=4492.557 buffer_time=2.930 print_stall=10 extruder: target=215 temp=214.9 pwm=0.448
Stats 4481.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3629828 bytes_read=1773404 bytes_retransmit=9 bytes_invalid=0 send_seq=98258 receive_seq=98258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.097 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=762667 sysload=0.11 cputime=239.119 memavail=1634504 print_time=4493.525 buffer_time=2.898 print_stall=10 extruder: target=215 temp=214.9 pwm=0.439
Stats 4482.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=3630499 bytes_read=1773820 bytes_retransmit=9 bytes_invalid=0 send_seq=98278 receive_seq=98278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.6 sd_pos=762732 sysload=0.11 cputime=239.173 memavail=1634296 print_time=4494.493 buffer_time=2.865 print_stall=10 extruder: target=215 temp=214.8 pwm=0.544
Stats 4483.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=3631139 bytes_read=1774217 bytes_retransmit=9 bytes_invalid=0 send_seq=98300 receive_seq=98300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.544 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=762828 sysload=0.11 cputime=239.225 memavail=1634564 print_time=4495.461 buffer_time=2.832 print_stall=10 extruder: target=215 temp=215.1 pwm=0.425
Stats 4484.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=3631869 bytes_read=1774644 bytes_retransmit=9 bytes_invalid=0 send_seq=98322 receive_seq=98322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.431 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=762894 sysload=0.10 cputime=239.281 memavail=1634232 print_time=4496.427 buffer_time=2.798 print_stall=10 extruder: target=215 temp=215.0 pwm=0.516
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4485.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=3632579 bytes_read=1775050 bytes_retransmit=9 bytes_invalid=0 send_seq=98343 receive_seq=98343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=762926 sysload=0.10 cputime=239.336 memavail=1634216 print_time=4497.134 buffer_time=2.503 print_stall=10 extruder: target=215 temp=214.9 pwm=0.516
Stats 4486.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=3633349 bytes_read=1775452 bytes_retransmit=9 bytes_invalid=0 send_seq=98366 receive_seq=98366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=57.9 mcu_temp: temp=42.3 sd_pos=762991 sysload=0.10 cputime=239.394 memavail=1633956 print_time=4498.096 buffer_time=2.465 print_stall=10 extruder: target=215 temp=214.8 pwm=0.526
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4487.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3634098 bytes_read=1775889 bytes_retransmit=9 bytes_invalid=0 send_seq=98387 receive_seq=98387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.397 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=763056 sysload=0.10 cputime=239.450 memavail=1634300 print_time=4499.054 buffer_time=2.422 print_stall=10 extruder: target=215 temp=214.9 pwm=0.455
Stats 4488.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3634881 bytes_read=1776305 bytes_retransmit=9 bytes_invalid=0 send_seq=98410 receive_seq=98410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=763151 sysload=0.10 cputime=239.508 memavail=1634268 print_time=4500.248 buffer_time=2.616 print_stall=10 extruder: target=215 temp=214.7 pwm=0.583
Stats 4489.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3635588 bytes_read=1776707 bytes_retransmit=9 bytes_invalid=0 send_seq=98433 receive_seq=98433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=763247 sysload=0.09 cputime=239.565 memavail=1634288 print_time=4501.192 buffer_time=2.559 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4490.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3636359 bytes_read=1777149 bytes_retransmit=9 bytes_invalid=0 send_seq=98458 receive_seq=98458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.455 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=763313 sysload=0.09 cputime=239.614 memavail=1634296 print_time=4502.128 buffer_time=2.494 print_stall=10 extruder: target=215 temp=214.9 pwm=0.463
Stats 4491.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3637042 bytes_read=1777576 bytes_retransmit=9 bytes_invalid=0 send_seq=98481 receive_seq=98481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.487 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=763409 sysload=0.09 cputime=239.662 memavail=1634296 print_time=4503.062 buffer_time=2.429 print_stall=10 extruder: target=215 temp=215.1 pwm=0.386
Stats 4492.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3637760 bytes_read=1777993 bytes_retransmit=9 bytes_invalid=0 send_seq=98504 receive_seq=98504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=763473 sysload=0.09 cputime=239.715 memavail=1634808 print_time=4503.973 buffer_time=2.339 print_stall=10 extruder: target=215 temp=215.0 pwm=0.470
Stats 4493.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3638432 bytes_read=1778410 bytes_retransmit=9 bytes_invalid=0 send_seq=98524 receive_seq=98524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.426 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=763535 sysload=0.09 cputime=239.772 memavail=1634804 print_time=4504.880 buffer_time=2.246 print_stall=10 extruder: target=215 temp=214.9 pwm=0.541
Stats 4494.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3639154 bytes_read=1778826 bytes_retransmit=9 bytes_invalid=0 send_seq=98547 receive_seq=98547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.289 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=763601 sysload=0.08 cputime=239.830 memavail=1634608 print_time=4505.778 buffer_time=2.143 print_stall=10 extruder: target=215 temp=215.0 pwm=0.417
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4495.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3639825 bytes_read=1779218 bytes_retransmit=9 bytes_invalid=0 send_seq=98568 receive_seq=98568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=763696 sysload=0.08 cputime=239.886 memavail=1634520 print_time=4506.676 buffer_time=2.040 print_stall=10 extruder: target=215 temp=215.0 pwm=0.412
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4496.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3640899 bytes_read=1779675 bytes_retransmit=9 bytes_invalid=0 send_seq=98596 receive_seq=98596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.375 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=763825 sysload=0.08 cputime=239.943 memavail=1634496 print_time=4508.398 buffer_time=2.761 print_stall=10 extruder: target=215 temp=214.9 pwm=0.480
Stats 4497.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3641612 bytes_read=1780111 bytes_retransmit=9 bytes_invalid=0 send_seq=98620 receive_seq=98620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=763891 sysload=0.08 cputime=239.982 memavail=1634512 print_time=4509.240 buffer_time=2.603 print_stall=10 extruder: target=215 temp=214.8 pwm=0.532
Stats 4498.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3642283 bytes_read=1780503 bytes_retransmit=9 bytes_invalid=0 send_seq=98641 receive_seq=98641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=763955 sysload=0.08 cputime=240.035 memavail=1634476 print_time=4510.068 buffer_time=2.430 print_stall=10 extruder: target=215 temp=214.9 pwm=0.532
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4499.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3642947 bytes_read=1780925 bytes_retransmit=9 bytes_invalid=0 send_seq=98662 receive_seq=98662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.023 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=764053 sysload=0.08 cputime=240.092 memavail=1634340 print_time=4510.893 buffer_time=2.255 print_stall=10 extruder: target=215 temp=214.9 pwm=0.416
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4500.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3643572 bytes_read=1781321 bytes_retransmit=9 bytes_invalid=0 send_seq=98681 receive_seq=98681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=764116 sysload=0.08 cputime=240.149 memavail=1634844 print_time=4511.670 buffer_time=2.031 print_stall=10 extruder: target=215 temp=214.9 pwm=0.428
Stats 4501.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3644564 bytes_read=1781738 bytes_retransmit=9 bytes_invalid=0 send_seq=98707 receive_seq=98707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.445 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=764244 sysload=0.08 cputime=240.208 memavail=1634908 print_time=4513.186 buffer_time=2.547 print_stall=10 extruder: target=215 temp=214.9 pwm=0.539
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4502.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3645260 bytes_read=1782185 bytes_retransmit=9 bytes_invalid=0 send_seq=98730 receive_seq=98730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.582 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=764337 sysload=0.08 cputime=240.268 memavail=1634568 print_time=4513.910 buffer_time=2.270 print_stall=10 extruder: target=215 temp=214.9 pwm=0.510
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4503.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3646257 bytes_read=1782611 bytes_retransmit=9 bytes_invalid=0 send_seq=98755 receive_seq=98755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=764463 sysload=0.08 cputime=240.314 memavail=1620676 print_time=4515.280 buffer_time=2.640 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 4504.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3646892 bytes_read=1782998 bytes_retransmit=9 bytes_invalid=0 send_seq=98775 receive_seq=98775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=764526 sysload=0.15 cputime=240.345 memavail=1633384 print_time=4515.918 buffer_time=2.277 print_stall=10 extruder: target=215 temp=214.9 pwm=0.464
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4505.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3647953 bytes_read=1783455 bytes_retransmit=9 bytes_invalid=0 send_seq=98803 receive_seq=98803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=764716 sysload=0.15 cputime=240.390 memavail=1633320 print_time=4517.114 buffer_time=2.472 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4506.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3648987 bytes_read=1783896 bytes_retransmit=9 bytes_invalid=0 send_seq=98831 receive_seq=98831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=54.9 pwm=0.378 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=764876 sysload=0.15 cputime=240.446 memavail=1633360 print_time=4518.119 buffer_time=2.477 print_stall=10 extruder: target=215 temp=214.9 pwm=0.539
Stats 4507.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3649939 bytes_read=1784318 bytes_retransmit=9 bytes_invalid=0 send_seq=98855 receive_seq=98855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=765005 sysload=0.15 cputime=240.501 memavail=1633624 print_time=4518.879 buffer_time=2.237 print_stall=10 extruder: target=215 temp=215.0 pwm=0.454
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4508.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3651882 bytes_read=1784845 bytes_retransmit=9 bytes_invalid=0 send_seq=98897 receive_seq=98897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=765487 sysload=0.15 cputime=240.568 memavail=1633352 print_time=4520.021 buffer_time=2.378 print_stall=10 extruder: target=215 temp=215.1 pwm=0.424
Stats 4509.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3652434 bytes_read=1785241 bytes_retransmit=9 bytes_invalid=0 send_seq=98916 receive_seq=98916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=765831 sysload=0.14 cputime=240.630 memavail=1633596 print_time=4520.880 buffer_time=2.236 print_stall=10 extruder: target=215 temp=215.0 pwm=0.469
Stats 4510.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3653128 bytes_read=1785628 bytes_retransmit=9 bytes_invalid=0 send_seq=98936 receive_seq=98936 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=766212 sysload=0.14 cputime=240.681 memavail=1633612 print_time=4521.873 buffer_time=2.228 print_stall=10 extruder: target=215 temp=215.0 pwm=0.469
Stats 4511.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3653758 bytes_read=1786045 bytes_retransmit=9 bytes_invalid=0 send_seq=98956 receive_seq=98956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=766570 sysload=0.14 cputime=240.726 memavail=1633580 print_time=4522.842 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.0 pwm=0.466
Stats 4512.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3654413 bytes_read=1786466 bytes_retransmit=9 bytes_invalid=0 send_seq=98977 receive_seq=98977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=766927 sysload=0.14 cputime=240.786 memavail=1633584 print_time=4523.701 buffer_time=2.054 print_stall=10 extruder: target=215 temp=215.1 pwm=0.466
Stats 4513.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3655214 bytes_read=1786868 bytes_retransmit=9 bytes_invalid=0 send_seq=99000 receive_seq=99000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=767346 sysload=0.14 cputime=240.848 memavail=1633624 print_time=4524.855 buffer_time=2.209 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 4514.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3655953 bytes_read=1787290 bytes_retransmit=9 bytes_invalid=0 send_seq=99021 receive_seq=99021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=767660 sysload=0.13 cputime=240.905 memavail=1633372 print_time=4525.739 buffer_time=2.091 print_stall=10 extruder: target=215 temp=215.0 pwm=0.428
Stats 4515.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3656615 bytes_read=1787686 bytes_retransmit=9 bytes_invalid=0 send_seq=99040 receive_seq=99040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=768010 sysload=0.13 cputime=240.960 memavail=1633396 print_time=4526.748 buffer_time=2.100 print_stall=10 extruder: target=215 temp=214.9 pwm=0.554
Stats 4516.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3657394 bytes_read=1788088 bytes_retransmit=9 bytes_invalid=0 send_seq=99063 receive_seq=99063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=768499 sysload=0.13 cputime=241.021 memavail=1633568 print_time=4528.010 buffer_time=2.362 print_stall=10 extruder: target=215 temp=215.0 pwm=0.507
Stats 4517.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3658051 bytes_read=1788515 bytes_retransmit=9 bytes_invalid=0 send_seq=99082 receive_seq=99082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.324 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=768794 sysload=0.13 cputime=241.083 memavail=1633488 print_time=4528.768 buffer_time=2.119 print_stall=10 extruder: target=215 temp=215.0 pwm=0.507
Stats 4518.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3658863 bytes_read=1788936 bytes_retransmit=9 bytes_invalid=0 send_seq=99106 receive_seq=99106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=769213 sysload=0.13 cputime=241.143 memavail=1633580 print_time=4530.138 buffer_time=2.488 print_stall=10 extruder: target=215 temp=215.1 pwm=0.451
Stats 4519.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3659348 bytes_read=1789308 bytes_retransmit=9 bytes_invalid=0 send_seq=99123 receive_seq=99123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=769399 sysload=0.12 cputime=241.194 memavail=1633808 print_time=4530.829 buffer_time=2.178 print_stall=10 extruder: target=215 temp=215.0 pwm=0.505
Stats 4520.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3659874 bytes_read=1789720 bytes_retransmit=9 bytes_invalid=0 send_seq=99142 receive_seq=99142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=769652 sysload=0.12 cputime=241.247 memavail=1634064 print_time=4531.714 buffer_time=2.062 print_stall=10 extruder: target=215 temp=215.1 pwm=0.423
Stats 4521.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3660476 bytes_read=1790116 bytes_retransmit=9 bytes_invalid=0 send_seq=99161 receive_seq=99161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=769912 sysload=0.12 cputime=241.290 memavail=1634396 print_time=4532.731 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.1 pwm=0.442
Stats 4522.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3661123 bytes_read=1790518 bytes_retransmit=9 bytes_invalid=0 send_seq=99181 receive_seq=99181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.416 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=770236 sysload=0.12 cputime=241.347 memavail=1634568 print_time=4533.941 buffer_time=2.288 print_stall=10 extruder: target=215 temp=215.1 pwm=0.486
Stats 4523.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3661653 bytes_read=1790922 bytes_retransmit=9 bytes_invalid=0 send_seq=99199 receive_seq=99199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.2 pwm=0.013 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=770496 sysload=0.12 cputime=241.393 memavail=1634312 print_time=4534.825 buffer_time=2.172 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 4524.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3662799 bytes_read=1791352 bytes_retransmit=9 bytes_invalid=0 send_seq=99227 receive_seq=99227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=770820 sysload=0.11 cputime=241.441 memavail=1634568 print_time=4535.980 buffer_time=2.326 print_stall=10 extruder: target=215 temp=215.2 pwm=0.487
Stats 4525.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3663841 bytes_read=1791754 bytes_retransmit=9 bytes_invalid=0 send_seq=99252 receive_seq=99252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=770947 sysload=0.11 cputime=241.495 memavail=1634260 print_time=4536.952 buffer_time=2.297 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 4526.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3664876 bytes_read=1792189 bytes_retransmit=9 bytes_invalid=0 send_seq=99278 receive_seq=99278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=771104 sysload=0.11 cputime=241.544 memavail=1634876 print_time=4538.100 buffer_time=2.445 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 4527.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3665563 bytes_read=1792605 bytes_retransmit=9 bytes_invalid=0 send_seq=99299 receive_seq=99299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=771168 sysload=0.11 cputime=241.591 memavail=1635160 print_time=4538.725 buffer_time=2.069 print_stall=10 extruder: target=215 temp=215.2 pwm=0.432
Stats 4528.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3666539 bytes_read=1793022 bytes_retransmit=9 bytes_invalid=0 send_seq=99325 receive_seq=99325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=771324 sysload=0.11 cputime=241.648 memavail=1634884 print_time=4540.072 buffer_time=2.416 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 4529.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3667257 bytes_read=1793444 bytes_retransmit=9 bytes_invalid=0 send_seq=99346 receive_seq=99346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=771390 sysload=0.10 cputime=241.703 memavail=1634848 print_time=4540.786 buffer_time=2.130 print_stall=10 extruder: target=215 temp=215.0 pwm=0.625
Stats 4530.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3668268 bytes_read=1793880 bytes_retransmit=9 bytes_invalid=0 send_seq=99373 receive_seq=99373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.057 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=771520 sysload=0.10 cputime=241.762 memavail=1634848 print_time=4542.284 buffer_time=2.626 print_stall=10 extruder: target=215 temp=215.1 pwm=0.491
Stats 4531.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3668945 bytes_read=1794277 bytes_retransmit=9 bytes_invalid=0 send_seq=99395 receive_seq=99395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=771614 sysload=0.10 cputime=241.818 memavail=1634580 print_time=4543.066 buffer_time=2.408 print_stall=10 extruder: target=215 temp=215.1 pwm=0.531
Stats 4532.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3669598 bytes_read=1794714 bytes_retransmit=9 bytes_invalid=0 send_seq=99416 receive_seq=99416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=771680 sysload=0.10 cputime=241.872 memavail=1634848 print_time=4543.871 buffer_time=2.212 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 4533.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3670245 bytes_read=1795115 bytes_retransmit=9 bytes_invalid=0 send_seq=99436 receive_seq=99436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.446 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=771742 sysload=0.10 cputime=241.925 memavail=1634580 print_time=4544.691 buffer_time=2.031 print_stall=10 extruder: target=215 temp=215.1 pwm=0.473
Stats 4534.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3671267 bytes_read=1795537 bytes_retransmit=9 bytes_invalid=0 send_seq=99463 receive_seq=99463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=771871 sysload=0.09 cputime=241.982 memavail=1634804 print_time=4546.377 buffer_time=2.716 print_stall=10 extruder: target=215 temp=215.0 pwm=0.532
Stats 4535.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3671971 bytes_read=1795959 bytes_retransmit=9 bytes_invalid=0 send_seq=99484 receive_seq=99484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=771937 sysload=0.09 cputime=242.033 memavail=1634624 print_time=4547.243 buffer_time=2.582 print_stall=10 extruder: target=215 temp=215.1 pwm=0.469
Stats 4536.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3672668 bytes_read=1796370 bytes_retransmit=9 bytes_invalid=0 send_seq=99506 receive_seq=99506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=772001 sysload=0.09 cputime=242.085 memavail=1634080 print_time=4548.126 buffer_time=2.465 print_stall=10 extruder: target=215 temp=215.0 pwm=0.552
Stats 4537.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3673359 bytes_read=1796777 bytes_retransmit=9 bytes_invalid=0 send_seq=99527 receive_seq=99527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.731 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=772067 sysload=0.09 cputime=242.141 memavail=1634380 print_time=4549.017 buffer_time=2.355 print_stall=10 extruder: target=215 temp=214.9 pwm=0.544
Stats 4538.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3674014 bytes_read=1797189 bytes_retransmit=9 bytes_invalid=0 send_seq=99546 receive_seq=99546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=772131 sysload=0.09 cputime=242.193 memavail=1634080 print_time=4549.918 buffer_time=2.256 print_stall=10 extruder: target=215 temp=215.0 pwm=0.481
Stats 4539.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3674634 bytes_read=1797585 bytes_retransmit=9 bytes_invalid=0 send_seq=99565 receive_seq=99565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=772197 sysload=0.08 cputime=242.245 memavail=1634096 print_time=4550.829 buffer_time=2.167 print_stall=10 extruder: target=215 temp=215.0 pwm=0.481
Stats 4540.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3675281 bytes_read=1797967 bytes_retransmit=9 bytes_invalid=0 send_seq=99584 receive_seq=99584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=772260 sysload=0.08 cputime=242.297 memavail=1634120 print_time=4551.750 buffer_time=2.087 print_stall=10 extruder: target=215 temp=215.0 pwm=0.493
Stats 4541.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3675972 bytes_read=1798394 bytes_retransmit=9 bytes_invalid=0 send_seq=99606 receive_seq=99606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=772358 sysload=0.08 cputime=242.342 memavail=1634064 print_time=4552.681 buffer_time=2.018 print_stall=10 extruder: target=215 temp=215.0 pwm=0.493
Stats 4542.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3677038 bytes_read=1798845 bytes_retransmit=9 bytes_invalid=0 send_seq=99633 receive_seq=99633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=772488 sysload=0.08 cputime=242.382 memavail=1634104 print_time=4554.562 buffer_time=2.898 print_stall=10 extruder: target=215 temp=215.0 pwm=0.493
Stats 4543.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3677696 bytes_read=1799242 bytes_retransmit=9 bytes_invalid=0 send_seq=99655 receive_seq=99655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=772552 sysload=0.08 cputime=242.432 memavail=1634352 print_time=4555.509 buffer_time=2.845 print_stall=10 extruder: target=215 temp=215.0 pwm=0.508
Stats 4544.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3678425 bytes_read=1799669 bytes_retransmit=9 bytes_invalid=0 send_seq=99677 receive_seq=99677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=772618 sysload=0.08 cputime=242.484 memavail=1634352 print_time=4556.462 buffer_time=2.797 print_stall=10 extruder: target=215 temp=215.1 pwm=0.404
Stats 4545.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3679127 bytes_read=1800085 bytes_retransmit=9 bytes_invalid=0 send_seq=99700 receive_seq=99700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=772682 sysload=0.08 cputime=242.538 memavail=1634360 print_time=4557.419 buffer_time=2.753 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 4546.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3679723 bytes_read=1800467 bytes_retransmit=9 bytes_invalid=0 send_seq=99719 receive_seq=99719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=772778 sysload=0.08 cputime=242.581 memavail=1634344 print_time=4558.393 buffer_time=2.727 print_stall=10 extruder: target=215 temp=214.9 pwm=0.472
Stats 4547.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=3680442 bytes_read=1800904 bytes_retransmit=9 bytes_invalid=0 send_seq=99740 receive_seq=99740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=772841 sysload=0.08 cputime=242.622 memavail=1634352 print_time=4559.344 buffer_time=2.677 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 4548.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=3681133 bytes_read=1801315 bytes_retransmit=9 bytes_invalid=0 send_seq=99762 receive_seq=99762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.440 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=772906 sysload=0.08 cputime=242.674 memavail=1634604 print_time=4560.307 buffer_time=2.640 print_stall=10 extruder: target=215 temp=215.0 pwm=0.515
Stats 4549.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=3681880 bytes_read=1801722 bytes_retransmit=9 bytes_invalid=0 send_seq=99786 receive_seq=99786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=772968 sysload=0.07 cputime=242.728 memavail=1634608 print_time=4561.271 buffer_time=2.603 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 4550.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=3682561 bytes_read=1802158 bytes_retransmit=9 bytes_invalid=0 send_seq=99807 receive_seq=99807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=773031 sysload=0.07 cputime=242.780 memavail=1634604 print_time=4562.234 buffer_time=2.566 print_stall=10 extruder: target=215 temp=215.2 pwm=0.422
Stats 4551.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=3683227 bytes_read=1802555 bytes_retransmit=9 bytes_invalid=0 send_seq=99829 receive_seq=99829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=773095 sysload=0.07 cputime=242.833 memavail=1634448 print_time=4563.198 buffer_time=2.529 print_stall=10 extruder: target=215 temp=215.1 pwm=0.432
Stats 4552.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3683914 bytes_read=1802967 bytes_retransmit=9 bytes_invalid=0 send_seq=99851 receive_seq=99851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.494 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=773193 sysload=0.07 cputime=242.888 memavail=1634368 print_time=4564.171 buffer_time=2.501 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 4553.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3684609 bytes_read=1803424 bytes_retransmit=9 bytes_invalid=0 send_seq=99874 receive_seq=99874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=773257 sysload=0.07 cputime=242.941 memavail=1634368 print_time=4565.121 buffer_time=2.451 print_stall=10 extruder: target=215 temp=215.0 pwm=0.486
Stats 4554.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3685276 bytes_read=1803806 bytes_retransmit=9 bytes_invalid=0 send_seq=99893 receive_seq=99893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.122 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=773323 sysload=0.06 cputime=242.991 memavail=1634056 print_time=4566.077 buffer_time=2.405 print_stall=10 extruder: target=215 temp=215.1 pwm=0.486
Stats 4555.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3685896 bytes_read=1804183 bytes_retransmit=9 bytes_invalid=0 send_seq=99911 receive_seq=99911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=773387 sysload=0.06 cputime=243.046 memavail=1634316 print_time=4567.027 buffer_time=2.355 print_stall=10 extruder: target=215 temp=215.0 pwm=0.486
Stats 4556.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3686582 bytes_read=1804609 bytes_retransmit=9 bytes_invalid=0 send_seq=99930 receive_seq=99930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.137 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=773452 sysload=0.06 cputime=243.089 memavail=1634300 print_time=4567.973 buffer_time=2.300 print_stall=10 extruder: target=215 temp=214.9 pwm=0.495
Stats 4557.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3687265 bytes_read=1805011 bytes_retransmit=9 bytes_invalid=0 send_seq=99950 receive_seq=99950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.213 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=773515 sysload=0.06 cputime=243.130 memavail=1634296 print_time=4568.914 buffer_time=2.241 print_stall=10 extruder: target=215 temp=215.0 pwm=0.427
Stats 4558.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3687969 bytes_read=1805408 bytes_retransmit=9 bytes_invalid=0 send_seq=99972 receive_seq=99972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=773614 sysload=0.06 cputime=243.180 memavail=1634572 print_time=4569.855 buffer_time=2.181 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 4559.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3688652 bytes_read=1805844 bytes_retransmit=9 bytes_invalid=0 send_seq=99993 receive_seq=99993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=773678 sysload=0.06 cputime=243.233 memavail=1634584 print_time=4570.778 buffer_time=2.102 print_stall=10 extruder: target=215 temp=215.1 pwm=0.390
Stats 4560.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3689311 bytes_read=1806236 bytes_retransmit=9 bytes_invalid=0 send_seq=100014 receive_seq=100014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.1 sd_pos=773744 sysload=0.06 cputime=243.281 memavail=1634584 print_time=4571.695 buffer_time=2.019 print_stall=10 extruder: target=215 temp=214.8 pwm=0.577
Stats 4561.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3690414 bytes_read=1806668 bytes_retransmit=9 bytes_invalid=0 send_seq=100043 receive_seq=100043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=773874 sysload=0.06 cputime=243.336 memavail=1634584 print_time=4573.500 buffer_time=2.823 print_stall=10 extruder: target=215 temp=214.7 pwm=0.564
Stats 4562.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3691133 bytes_read=1807129 bytes_retransmit=9 bytes_invalid=0 send_seq=100066 receive_seq=100066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=773969 sysload=0.06 cputime=243.391 memavail=1634584 print_time=4574.387 buffer_time=2.710 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 4563.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3692045 bytes_read=1807546 bytes_retransmit=9 bytes_invalid=0 send_seq=100092 receive_seq=100092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=774034 sysload=0.06 cputime=243.447 memavail=1634464 print_time=4575.262 buffer_time=2.584 print_stall=10 extruder: target=215 temp=215.0 pwm=0.419
Stats 4564.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3692696 bytes_read=1807943 bytes_retransmit=9 bytes_invalid=0 send_seq=100111 receive_seq=100111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=774098 sysload=0.05 cputime=243.502 memavail=1634028 print_time=4576.123 buffer_time=2.444 print_stall=10 extruder: target=215 temp=215.0 pwm=0.419
Stats 4565.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3693372 bytes_read=1808364 bytes_retransmit=9 bytes_invalid=0 send_seq=100132 receive_seq=100132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=774164 sysload=0.05 cputime=243.556 memavail=1634276 print_time=4576.967 buffer_time=2.288 print_stall=10 extruder: target=215 temp=215.0 pwm=0.437
Stats 4566.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3694037 bytes_read=1808746 bytes_retransmit=9 bytes_invalid=0 send_seq=100151 receive_seq=100151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.515 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=774228 sysload=0.05 cputime=243.599 memavail=1633844 print_time=4577.797 buffer_time=2.117 print_stall=10 extruder: target=215 temp=214.9 pwm=0.535
Stats 4567.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000063 bytes_write=3695066 bytes_read=1809198 bytes_retransmit=9 bytes_invalid=0 send_seq=100178 receive_seq=100178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=774391 sysload=0.05 cputime=243.644 memavail=1633820 print_time=4579.405 buffer_time=2.724 print_stall=10 extruder: target=215 temp=215.1 pwm=0.365
Stats 4568.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000063 bytes_write=3695770 bytes_read=1809619 bytes_retransmit=9 bytes_invalid=0 send_seq=100199 receive_seq=100199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=774456 sysload=0.05 cputime=243.697 memavail=1634112 print_time=4580.179 buffer_time=2.498 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 4569.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000063 bytes_write=3696411 bytes_read=1810001 bytes_retransmit=9 bytes_invalid=0 send_seq=100218 receive_seq=100218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=774519 sysload=0.05 cputime=243.746 memavail=1634356 print_time=4580.931 buffer_time=2.250 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 4570.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000063 bytes_write=3697350 bytes_read=1810428 bytes_retransmit=9 bytes_invalid=0 send_seq=100243 receive_seq=100243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=774678 sysload=0.05 cputime=243.801 memavail=1634616 print_time=4582.378 buffer_time=2.696 print_stall=10 extruder: target=215 temp=215.0 pwm=0.469
Stats 4571.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000063 bytes_write=3698031 bytes_read=1810849 bytes_retransmit=9 bytes_invalid=0 send_seq=100264 receive_seq=100264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=774743 sysload=0.05 cputime=243.854 memavail=1634664 print_time=4583.042 buffer_time=2.360 print_stall=10 extruder: target=215 temp=215.1 pwm=0.407
Stats 4572.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3698700 bytes_read=1811251 bytes_retransmit=9 bytes_invalid=0 send_seq=100284 receive_seq=100284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.354 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=774809 sysload=0.05 cputime=243.905 memavail=1634436 print_time=4583.687 buffer_time=2.004 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 4573.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3699726 bytes_read=1811678 bytes_retransmit=9 bytes_invalid=0 send_seq=100309 receive_seq=100309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=774971 sysload=0.05 cputime=243.959 memavail=1634400 print_time=4584.885 buffer_time=2.201 print_stall=10 extruder: target=215 temp=214.9 pwm=0.505
Stats 4574.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3700755 bytes_read=1812124 bytes_retransmit=9 bytes_invalid=0 send_seq=100335 receive_seq=100335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=775134 sysload=0.04 cputime=244.015 memavail=1634696 print_time=4585.907 buffer_time=2.223 print_stall=10 extruder: target=215 temp=214.9 pwm=0.493
Stats 4575.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3701771 bytes_read=1812536 bytes_retransmit=9 bytes_invalid=0 send_seq=100360 receive_seq=100360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.496 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=775266 sysload=0.04 cputime=244.071 memavail=1634640 print_time=4586.732 buffer_time=2.046 print_stall=10 extruder: target=215 temp=214.9 pwm=0.493
Stats 4576.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3703932 bytes_read=1813053 bytes_retransmit=9 bytes_invalid=0 send_seq=100403 receive_seq=100403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.011 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=775789 sysload=0.04 cputime=244.136 memavail=1634340 print_time=4588.045 buffer_time=2.359 print_stall=10 extruder: target=215 temp=215.1 pwm=0.414
Stats 4577.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=3704633 bytes_read=1813484 bytes_retransmit=9 bytes_invalid=0 send_seq=100423 receive_seq=100423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=775975 sysload=0.04 cputime=244.195 memavail=1634448 print_time=4588.784 buffer_time=2.098 print_stall=10 extruder: target=215 temp=214.8 pwm=0.519
Stats 4578.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=3705342 bytes_read=1813876 bytes_retransmit=9 bytes_invalid=0 send_seq=100444 receive_seq=100444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.325 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=776253 sysload=0.04 cputime=244.256 memavail=1634684 print_time=4589.882 buffer_time=2.195 print_stall=10 extruder: target=215 temp=214.9 pwm=0.460
Stats 4579.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=3705944 bytes_read=1814273 bytes_retransmit=9 bytes_invalid=0 send_seq=100463 receive_seq=100463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=776540 sysload=0.12 cputime=244.319 memavail=1634660 print_time=4590.981 buffer_time=2.293 print_stall=10 extruder: target=215 temp=214.9 pwm=0.460
Stats 4580.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=3706542 bytes_read=1814684 bytes_retransmit=9 bytes_invalid=0 send_seq=100482 receive_seq=100482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=776731 sysload=0.12 cputime=244.374 memavail=1634708 print_time=4591.713 buffer_time=2.024 print_stall=10 extruder: target=215 temp=215.1 pwm=0.418
Stats 4581.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=3707342 bytes_read=1815076 bytes_retransmit=9 bytes_invalid=0 send_seq=100503 receive_seq=100503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=777020 sysload=0.12 cputime=244.437 memavail=1634456 print_time=4592.732 buffer_time=2.043 print_stall=10 extruder: target=215 temp=215.1 pwm=0.398
Stats 4582.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3707961 bytes_read=1815483 bytes_retransmit=9 bytes_invalid=0 send_seq=100521 receive_seq=100521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.201 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=777270 sysload=0.12 cputime=244.497 memavail=1634160 print_time=4593.737 buffer_time=2.047 print_stall=10 extruder: target=215 temp=215.1 pwm=0.396
Stats 4583.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3708680 bytes_read=1815886 bytes_retransmit=9 bytes_invalid=0 send_seq=100540 receive_seq=100540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=777522 sysload=0.12 cputime=244.549 memavail=1634404 print_time=4594.742 buffer_time=2.051 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 4584.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3709342 bytes_read=1816253 bytes_retransmit=9 bytes_invalid=0 send_seq=100558 receive_seq=100558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=777781 sysload=0.11 cputime=244.591 memavail=1634468 print_time=4595.746 buffer_time=2.054 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 4585.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3710052 bytes_read=1816649 bytes_retransmit=9 bytes_invalid=0 send_seq=100579 receive_seq=100579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.608 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=778074 sysload=0.11 cputime=244.652 memavail=1634484 print_time=4596.877 buffer_time=2.184 print_stall=10 extruder: target=215 temp=215.1 pwm=0.480
Stats 4586.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3710715 bytes_read=1817048 bytes_retransmit=9 bytes_invalid=0 send_seq=100598 receive_seq=100598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=778302 sysload=0.11 cputime=244.707 memavail=1633888 print_time=4597.724 buffer_time=2.030 print_stall=10 extruder: target=215 temp=215.1 pwm=0.469
Stats 4587.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3711316 bytes_read=1817450 bytes_retransmit=9 bytes_invalid=0 send_seq=100618 receive_seq=100618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=778488 sysload=0.11 cputime=244.765 memavail=1633912 print_time=4598.756 buffer_time=2.061 print_stall=10 extruder: target=215 temp=215.0 pwm=0.526
Stats 4588.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3711936 bytes_read=1817842 bytes_retransmit=9 bytes_invalid=0 send_seq=100636 receive_seq=100636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=57.0 mcu_temp: temp=42.7 sd_pos=778679 sysload=0.11 cputime=244.820 memavail=1633848 print_time=4599.788 buffer_time=2.093 print_stall=10 extruder: target=215 temp=215.3 pwm=0.313
Stats 4589.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3712420 bytes_read=1818243 bytes_retransmit=9 bytes_invalid=0 send_seq=100653 receive_seq=100653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=778873 sysload=0.18 cputime=244.876 memavail=1634168 print_time=4600.820 buffer_time=2.123 print_stall=10 extruder: target=215 temp=215.0 pwm=0.556
Stats 4590.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3713065 bytes_read=1818625 bytes_retransmit=9 bytes_invalid=0 send_seq=100672 receive_seq=100672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=779061 sysload=0.18 cputime=244.931 memavail=1634596 print_time=4601.852 buffer_time=2.155 print_stall=10 extruder: target=215 temp=215.1 pwm=0.461
Stats 4591.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3713634 bytes_read=1819017 bytes_retransmit=9 bytes_invalid=0 send_seq=100690 receive_seq=100690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.424 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=779257 sysload=0.18 cputime=244.978 memavail=1634652 print_time=4602.884 buffer_time=2.187 print_stall=10 extruder: target=215 temp=215.1 pwm=0.371
Stats 4592.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3714866 bytes_read=1819498 bytes_retransmit=9 bytes_invalid=0 send_seq=100720 receive_seq=100720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=779554 sysload=0.18 cputime=245.024 memavail=1634400 print_time=4604.030 buffer_time=2.332 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 4593.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3715900 bytes_read=1819910 bytes_retransmit=9 bytes_invalid=0 send_seq=100745 receive_seq=100745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=779686 sysload=0.18 cputime=245.076 memavail=1634656 print_time=4604.969 buffer_time=2.270 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 4594.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3716987 bytes_read=1820347 bytes_retransmit=9 bytes_invalid=0 send_seq=100772 receive_seq=100772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=779848 sysload=0.17 cputime=245.132 memavail=1634468 print_time=4606.086 buffer_time=2.387 print_stall=10 extruder: target=215 temp=215.0 pwm=0.513
Stats 4595.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=3718056 bytes_read=1820773 bytes_retransmit=9 bytes_invalid=0 send_seq=100799 receive_seq=100794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=779980 sysload=0.17 cputime=245.188 memavail=1634464 print_time=4607.341 buffer_time=2.640 print_stall=10 extruder: target=215 temp=215.0 pwm=0.488
Stats 4596.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3718702 bytes_read=1821200 bytes_retransmit=9 bytes_invalid=0 send_seq=100819 receive_seq=100819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=780076 sysload=0.17 cputime=245.233 memavail=1634152 print_time=4608.017 buffer_time=2.315 print_stall=10 extruder: target=215 temp=215.1 pwm=0.379
Stats 4597.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3719331 bytes_read=1821602 bytes_retransmit=9 bytes_invalid=0 send_seq=100839 receive_seq=100839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.560 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=780139 sysload=0.17 cputime=245.271 memavail=1634196 print_time=4608.722 buffer_time=2.019 print_stall=10 extruder: target=215 temp=215.1 pwm=0.435
Stats 4598.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3720382 bytes_read=1822058 bytes_retransmit=9 bytes_invalid=0 send_seq=100867 receive_seq=100867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=780269 sysload=0.17 cputime=245.331 memavail=1634644 print_time=4610.197 buffer_time=2.494 print_stall=10 extruder: target=215 temp=215.0 pwm=0.480
Stats 4599.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3721112 bytes_read=1822455 bytes_retransmit=9 bytes_invalid=0 send_seq=100889 receive_seq=100889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=780335 sysload=0.15 cputime=245.379 memavail=1634736 print_time=4610.969 buffer_time=2.266 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 4600.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3721753 bytes_read=1822862 bytes_retransmit=9 bytes_invalid=0 send_seq=100910 receive_seq=100910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=780431 sysload=0.15 cputime=245.418 memavail=1634440 print_time=4611.772 buffer_time=2.067 print_stall=10 extruder: target=215 temp=215.4 pwm=0.290
Stats 4601.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3722720 bytes_read=1823308 bytes_retransmit=9 bytes_invalid=0 send_seq=100933 receive_seq=100933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=780561 sysload=0.15 cputime=245.475 memavail=1634448 print_time=4613.401 buffer_time=2.696 print_stall=10 extruder: target=215 temp=215.2 pwm=0.455
Stats 4602.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3723491 bytes_read=1823705 bytes_retransmit=9 bytes_invalid=0 send_seq=100955 receive_seq=100955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=780626 sysload=0.15 cputime=245.530 memavail=1634348 print_time=4614.243 buffer_time=2.538 print_stall=10 extruder: target=215 temp=215.3 pwm=0.353
Stats 4603.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3724158 bytes_read=1824102 bytes_retransmit=9 bytes_invalid=0 send_seq=100974 receive_seq=100974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.460 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=780689 sysload=0.15 cputime=245.584 memavail=1634396 print_time=4615.101 buffer_time=2.395 print_stall=10 extruder: target=215 temp=215.0 pwm=0.506
Stats 4604.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3724841 bytes_read=1824518 bytes_retransmit=9 bytes_invalid=0 send_seq=100994 receive_seq=100994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=780788 sysload=0.14 cputime=245.639 memavail=1634600 print_time=4615.984 buffer_time=2.277 print_stall=10 extruder: target=215 temp=214.9 pwm=0.567
Stats 4605.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3725524 bytes_read=1824905 bytes_retransmit=9 bytes_invalid=0 send_seq=101014 receive_seq=101014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=780852 sysload=0.14 cputime=245.693 memavail=1634460 print_time=4616.858 buffer_time=2.150 print_stall=10 extruder: target=215 temp=214.9 pwm=0.544
Stats 4606.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3726213 bytes_read=1825347 bytes_retransmit=9 bytes_invalid=0 send_seq=101036 receive_seq=101036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.284 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=780918 sysload=0.14 cputime=245.741 memavail=1634416 print_time=4617.752 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.1 pwm=0.490
Stats 4607.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3727355 bytes_read=1825798 bytes_retransmit=9 bytes_invalid=0 send_seq=101066 receive_seq=101066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=781048 sysload=0.14 cputime=245.784 memavail=1634452 print_time=4619.570 buffer_time=2.861 print_stall=10 extruder: target=215 temp=214.9 pwm=0.488
Stats 4608.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3728047 bytes_read=1826195 bytes_retransmit=9 bytes_invalid=0 send_seq=101088 receive_seq=101088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=781144 sysload=0.14 cputime=245.838 memavail=1634440 print_time=4620.494 buffer_time=2.784 print_stall=10 extruder: target=215 temp=215.0 pwm=0.430
Stats 4609.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3728681 bytes_read=1826612 bytes_retransmit=9 bytes_invalid=0 send_seq=101108 receive_seq=101108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=781208 sysload=0.13 cputime=245.892 memavail=1634440 print_time=4621.426 buffer_time=2.716 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 4610.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3729382 bytes_read=1827018 bytes_retransmit=9 bytes_invalid=0 send_seq=101129 receive_seq=101129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=781272 sysload=0.13 cputime=245.942 memavail=1634648 print_time=4622.363 buffer_time=2.652 print_stall=10 extruder: target=215 temp=215.0 pwm=0.442
Stats 4611.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3730106 bytes_read=1827415 bytes_retransmit=9 bytes_invalid=0 send_seq=101151 receive_seq=101151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=781338 sysload=0.13 cputime=245.993 memavail=1634724 print_time=4623.305 buffer_time=2.592 print_stall=10 extruder: target=215 temp=214.9 pwm=0.471
Stats 4612.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3730773 bytes_read=1827842 bytes_retransmit=9 bytes_invalid=0 send_seq=101170 receive_seq=101170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=781401 sysload=0.13 cputime=246.046 memavail=1634436 print_time=4624.251 buffer_time=2.539 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 4613.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3731496 bytes_read=1828253 bytes_retransmit=9 bytes_invalid=0 send_seq=101192 receive_seq=101192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=781465 sysload=0.13 cputime=246.093 memavail=1633932 print_time=4625.202 buffer_time=2.490 print_stall=10 extruder: target=215 temp=214.9 pwm=0.485
Stats 4614.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3732174 bytes_read=1828656 bytes_retransmit=9 bytes_invalid=0 send_seq=101213 receive_seq=101213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.013 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=781529 sysload=0.12 cputime=246.130 memavail=1634168 print_time=4625.910 buffer_time=2.196 print_stall=10 extruder: target=215 temp=215.1 pwm=0.398
Stats 4615.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3732963 bytes_read=1829093 bytes_retransmit=9 bytes_invalid=0 send_seq=101237 receive_seq=101237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=781594 sysload=0.12 cputime=246.186 memavail=1633704 print_time=4626.865 buffer_time=2.151 print_stall=10 extruder: target=215 temp=215.2 pwm=0.347
Stats 4616.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=3733729 bytes_read=1829504 bytes_retransmit=9 bytes_invalid=0 send_seq=101259 receive_seq=101259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=781659 sysload=0.12 cputime=246.234 memavail=1633672 print_time=4627.824 buffer_time=2.109 print_stall=10 extruder: target=215 temp=214.9 pwm=0.551
Stats 4617.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3734474 bytes_read=1829916 bytes_retransmit=9 bytes_invalid=0 send_seq=101281 receive_seq=101281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.595 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=781723 sysload=0.12 cputime=246.272 memavail=1634040 print_time=4628.782 buffer_time=2.067 print_stall=10 extruder: target=215 temp=214.9 pwm=0.485
Stats 4618.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3735222 bytes_read=1830343 bytes_retransmit=9 bytes_invalid=0 send_seq=101303 receive_seq=101303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.080 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=781786 sysload=0.12 cputime=246.325 memavail=1633948 print_time=4629.741 buffer_time=2.025 print_stall=10 extruder: target=215 temp=215.0 pwm=0.485
Stats 4619.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3736006 bytes_read=1830759 bytes_retransmit=9 bytes_invalid=0 send_seq=101326 receive_seq=101326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=781881 sysload=0.11 cputime=246.373 memavail=1633948 print_time=4630.952 buffer_time=2.235 print_stall=10 extruder: target=215 temp=215.1 pwm=0.403
Stats 4620.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3736782 bytes_read=1831161 bytes_retransmit=9 bytes_invalid=0 send_seq=101349 receive_seq=101349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=781977 sysload=0.11 cputime=246.412 memavail=1634196 print_time=4631.925 buffer_time=2.207 print_stall=10 extruder: target=215 temp=215.1 pwm=0.437
Stats 4621.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3737513 bytes_read=1831588 bytes_retransmit=9 bytes_invalid=0 send_seq=101371 receive_seq=101371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=782041 sysload=0.11 cputime=246.464 memavail=1634512 print_time=4632.866 buffer_time=2.148 print_stall=10 extruder: target=215 temp=214.9 pwm=0.548
Stats 4622.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3738241 bytes_read=1832009 bytes_retransmit=9 bytes_invalid=0 send_seq=101392 receive_seq=101392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=782104 sysload=0.11 cputime=246.514 memavail=1634760 print_time=4633.817 buffer_time=2.099 print_stall=10 extruder: target=215 temp=215.1 pwm=0.395
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4623.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3738970 bytes_read=1832421 bytes_retransmit=9 bytes_invalid=0 send_seq=101417 receive_seq=101417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=782170 sysload=0.11 cputime=246.571 memavail=1635076 print_time=4634.764 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.0 pwm=0.406
Stats 4624.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3740066 bytes_read=1832878 bytes_retransmit=9 bytes_invalid=0 send_seq=101445 receive_seq=101445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=782300 sysload=0.10 cputime=246.626 memavail=1635572 print_time=4636.643 buffer_time=2.923 print_stall=10 extruder: target=215 temp=214.8 pwm=0.612
Stats 4625.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3740850 bytes_read=1833309 bytes_retransmit=9 bytes_invalid=0 send_seq=101471 receive_seq=101471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=782395 sysload=0.10 cputime=246.681 memavail=1635580 print_time=4637.585 buffer_time=2.863 print_stall=10 extruder: target=215 temp=214.9 pwm=0.535
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4626.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3741542 bytes_read=1833711 bytes_retransmit=9 bytes_invalid=0 send_seq=101494 receive_seq=101494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=782459 sysload=0.10 cputime=246.735 memavail=1634808 print_time=4638.499 buffer_time=2.776 print_stall=10 extruder: target=215 temp=215.1 pwm=0.368
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4627.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3742232 bytes_read=1834153 bytes_retransmit=9 bytes_invalid=0 send_seq=101516 receive_seq=101516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=782523 sysload=0.10 cputime=246.789 memavail=1634544 print_time=4639.413 buffer_time=2.690 print_stall=10 extruder: target=215 temp=214.8 pwm=0.601
Stats 4628.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3742976 bytes_read=1834574 bytes_retransmit=9 bytes_invalid=0 send_seq=101540 receive_seq=101540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.526 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=782588 sysload=0.10 cputime=246.839 memavail=1634512 print_time=4640.317 buffer_time=2.593 print_stall=10 extruder: target=215 temp=215.0 pwm=0.380
Stats 4629.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3743674 bytes_read=1834971 bytes_retransmit=9 bytes_invalid=0 send_seq=101562 receive_seq=101562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=782651 sysload=0.09 cputime=246.891 memavail=1634536 print_time=4641.211 buffer_time=2.487 print_stall=10 extruder: target=215 temp=214.8 pwm=0.495
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4630.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3744368 bytes_read=1835393 bytes_retransmit=9 bytes_invalid=0 send_seq=101583 receive_seq=101583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=782749 sysload=0.09 cputime=246.946 memavail=1634544 print_time=4642.095 buffer_time=2.370 print_stall=10 extruder: target=215 temp=215.0 pwm=0.430
Stats 4631.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3745072 bytes_read=1835804 bytes_retransmit=9 bytes_invalid=0 send_seq=101605 receive_seq=101605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=782813 sysload=0.09 cputime=246.997 memavail=1634532 print_time=4642.967 buffer_time=2.242 print_stall=10 extruder: target=215 temp=215.2 pwm=0.366
Stats 4632.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3745724 bytes_read=1836206 bytes_retransmit=9 bytes_invalid=0 send_seq=101625 receive_seq=101625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.284 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=782879 sysload=0.09 cputime=247.047 memavail=1634280 print_time=4643.825 buffer_time=2.099 print_stall=10 extruder: target=215 temp=214.8 pwm=0.593
Stats 4633.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3746731 bytes_read=1836653 bytes_retransmit=9 bytes_invalid=0 send_seq=101651 receive_seq=101651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=783009 sysload=0.09 cputime=247.102 memavail=1634320 print_time=4645.495 buffer_time=2.768 print_stall=10 extruder: target=215 temp=214.9 pwm=0.484
Stats 4634.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3747451 bytes_read=1837064 bytes_retransmit=9 bytes_invalid=0 send_seq=101673 receive_seq=101673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.618 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=783105 sysload=0.08 cputime=247.153 memavail=1634264 print_time=4646.306 buffer_time=2.578 print_stall=10 extruder: target=215 temp=215.0 pwm=0.485
Stats 4635.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3748141 bytes_read=1837456 bytes_retransmit=9 bytes_invalid=0 send_seq=101694 receive_seq=101694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=783171 sysload=0.08 cputime=247.208 memavail=1634004 print_time=4647.098 buffer_time=2.370 print_stall=10 extruder: target=215 temp=214.9 pwm=0.581
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4636.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3748793 bytes_read=1837878 bytes_retransmit=9 bytes_invalid=0 send_seq=101715 receive_seq=101715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=783235 sysload=0.08 cputime=247.264 memavail=1633972 print_time=4647.871 buffer_time=2.141 print_stall=10 extruder: target=215 temp=214.9 pwm=0.519
Stats 4637.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3749801 bytes_read=1838329 bytes_retransmit=9 bytes_invalid=0 send_seq=101742 receive_seq=101742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.165 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=783365 sysload=0.08 cputime=247.310 memavail=1633724 print_time=4649.347 buffer_time=2.617 print_stall=10 extruder: target=215 temp=215.1 pwm=0.354
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4638.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3750476 bytes_read=1838721 bytes_retransmit=9 bytes_invalid=0 send_seq=101763 receive_seq=101763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=783459 sysload=0.08 cputime=247.350 memavail=1633748 print_time=4650.066 buffer_time=2.335 print_stall=10 extruder: target=215 temp=215.2 pwm=0.417
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4639.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3751495 bytes_read=1839178 bytes_retransmit=9 bytes_invalid=0 send_seq=101791 receive_seq=101791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.407 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=783586 sysload=0.08 cputime=247.407 memavail=1633732 print_time=4651.370 buffer_time=2.639 print_stall=10 extruder: target=215 temp=215.1 pwm=0.426
Stats 4640.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3752248 bytes_read=1839589 bytes_retransmit=9 bytes_invalid=0 send_seq=101813 receive_seq=101813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=783650 sysload=0.08 cputime=247.464 memavail=1633492 print_time=4651.982 buffer_time=2.251 print_stall=10 extruder: target=215 temp=214.9 pwm=0.553
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4641.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3753122 bytes_read=1839981 bytes_retransmit=9 bytes_invalid=0 send_seq=101834 receive_seq=101834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=783810 sysload=0.08 cputime=247.518 memavail=1633420 print_time=4653.097 buffer_time=2.365 print_stall=10 extruder: target=215 temp=215.2 pwm=0.348
Stats 4642.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3754168 bytes_read=1840441 bytes_retransmit=9 bytes_invalid=0 send_seq=101860 receive_seq=101860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=783935 sysload=0.08 cputime=247.573 memavail=1633436 print_time=4654.029 buffer_time=2.296 print_stall=10 extruder: target=215 temp=215.1 pwm=0.388
Stats 4643.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3755354 bytes_read=1840875 bytes_retransmit=9 bytes_invalid=0 send_seq=101889 receive_seq=101889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=784096 sysload=0.08 cputime=247.634 memavail=1633432 print_time=4654.785 buffer_time=2.051 print_stall=10 extruder: target=215 temp=215.0 pwm=0.456
Stats 4644.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3757092 bytes_read=1841347 bytes_retransmit=9 bytes_invalid=0 send_seq=101928 receive_seq=101928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=784543 sysload=0.07 cputime=247.695 memavail=1633408 print_time=4655.776 buffer_time=2.041 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 4645.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3757747 bytes_read=1841757 bytes_retransmit=9 bytes_invalid=0 send_seq=101949 receive_seq=101949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.400 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=784854 sysload=0.07 cputime=247.758 memavail=1633448 print_time=4656.746 buffer_time=2.011 print_stall=10 extruder: target=215 temp=215.1 pwm=0.366
Stats 4646.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3758478 bytes_read=1842160 bytes_retransmit=9 bytes_invalid=0 send_seq=101971 receive_seq=101971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=785200 sysload=0.07 cputime=247.812 memavail=1633440 print_time=4657.837 buffer_time=2.102 print_stall=10 extruder: target=215 temp=215.2 pwm=0.380
Stats 4647.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3759113 bytes_read=1842557 bytes_retransmit=9 bytes_invalid=0 send_seq=101990 receive_seq=101990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=785555 sysload=0.07 cputime=247.853 memavail=1633400 print_time=4658.928 buffer_time=2.192 print_stall=10 extruder: target=215 temp=215.1 pwm=0.453
Stats 4648.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3759797 bytes_read=1842984 bytes_retransmit=9 bytes_invalid=0 send_seq=102012 receive_seq=102012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=785818 sysload=0.07 cputime=247.908 memavail=1633480 print_time=4659.755 buffer_time=2.018 print_stall=10 extruder: target=215 temp=215.1 pwm=0.414
Stats 4649.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3760660 bytes_read=1843410 bytes_retransmit=9 bytes_invalid=0 send_seq=102037 receive_seq=102037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.607 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=786197 sysload=0.07 cputime=247.967 memavail=1633664 print_time=4660.906 buffer_time=2.169 print_stall=10 extruder: target=215 temp=215.1 pwm=0.425
Stats 4650.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3761399 bytes_read=1843807 bytes_retransmit=9 bytes_invalid=0 send_seq=102059 receive_seq=102059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=786539 sysload=0.07 cputime=248.026 memavail=1633700 print_time=4662.030 buffer_time=2.291 print_stall=10 extruder: target=215 temp=214.9 pwm=0.535
Stats 4651.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=3762005 bytes_read=1844224 bytes_retransmit=9 bytes_invalid=0 send_seq=102079 receive_seq=102079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=786891 sysload=0.07 cputime=248.087 memavail=1633732 print_time=4663.153 buffer_time=2.414 print_stall=10 extruder: target=215 temp=215.1 pwm=0.422
Stats 4652.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3762609 bytes_read=1844630 bytes_retransmit=9 bytes_invalid=0 send_seq=102097 receive_seq=102097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=787114 sysload=0.07 cputime=248.142 memavail=1633632 print_time=4663.800 buffer_time=2.061 print_stall=10 extruder: target=215 temp=215.0 pwm=0.493
Stats 4653.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3763361 bytes_read=1845022 bytes_retransmit=9 bytes_invalid=0 send_seq=102118 receive_seq=102118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=787439 sysload=0.07 cputime=248.198 memavail=1633908 print_time=4664.754 buffer_time=2.014 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 4655.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3763970 bytes_read=1845434 bytes_retransmit=9 bytes_invalid=0 send_seq=102137 receive_seq=102137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=787694 sysload=0.06 cputime=248.257 memavail=1633868 print_time=4665.780 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.0 pwm=0.519
Stats 4656.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3764526 bytes_read=1845825 bytes_retransmit=9 bytes_invalid=0 send_seq=102155 receive_seq=102155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=787913 sysload=0.06 cputime=248.315 memavail=1633904 print_time=4666.806 buffer_time=2.064 print_stall=10 extruder: target=215 temp=215.1 pwm=0.418
Stats 4657.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3765117 bytes_read=1846202 bytes_retransmit=9 bytes_invalid=0 send_seq=102173 receive_seq=102173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=788134 sysload=0.06 cputime=248.371 memavail=1633648 print_time=4667.832 buffer_time=2.090 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 4658.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3765708 bytes_read=1846629 bytes_retransmit=9 bytes_invalid=0 send_seq=102192 receive_seq=102192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=788397 sysload=0.06 cputime=248.430 memavail=1633896 print_time=4668.858 buffer_time=2.115 print_stall=10 extruder: target=215 temp=215.1 pwm=0.471
Stats 4659.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3766305 bytes_read=1847030 bytes_retransmit=9 bytes_invalid=0 send_seq=102212 receive_seq=102212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.542 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=788622 sysload=0.06 cputime=248.488 memavail=1634120 print_time=4669.883 buffer_time=2.140 print_stall=10 extruder: target=215 temp=215.1 pwm=0.438
Stats 4660.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3766856 bytes_read=1847407 bytes_retransmit=9 bytes_invalid=0 send_seq=102230 receive_seq=102230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=788919 sysload=0.06 cputime=248.546 memavail=1633552 print_time=4670.765 buffer_time=2.021 print_stall=10 extruder: target=215 temp=214.9 pwm=0.573
Stats 4661.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3768250 bytes_read=1847879 bytes_retransmit=9 bytes_invalid=0 send_seq=102261 receive_seq=102261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=789141 sysload=0.06 cputime=248.604 memavail=1633592 print_time=4671.904 buffer_time=2.159 print_stall=10 extruder: target=215 temp=215.0 pwm=0.473
Stats 4662.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3769313 bytes_read=1848320 bytes_retransmit=9 bytes_invalid=0 send_seq=102289 receive_seq=102289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.570 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=789268 sysload=0.06 cputime=248.645 memavail=1633572 print_time=4672.887 buffer_time=2.142 print_stall=10 extruder: target=215 temp=214.9 pwm=0.558
Stats 4663.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3770451 bytes_read=1848762 bytes_retransmit=9 bytes_invalid=0 send_seq=102317 receive_seq=102317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=789424 sysload=0.06 cputime=248.707 memavail=1633564 print_time=4674.044 buffer_time=2.298 print_stall=10 extruder: target=215 temp=215.1 pwm=0.402
Stats 4664.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3771478 bytes_read=1849219 bytes_retransmit=9 bytes_invalid=0 send_seq=102345 receive_seq=102345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=789550 sysload=0.06 cputime=248.762 memavail=1633568 print_time=4675.332 buffer_time=2.586 print_stall=10 extruder: target=215 temp=215.2 pwm=0.367
Stats 4665.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3772172 bytes_read=1849630 bytes_retransmit=9 bytes_invalid=0 send_seq=102367 receive_seq=102367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=789645 sysload=0.05 cputime=248.817 memavail=1633608 print_time=4676.031 buffer_time=2.284 print_stall=10 extruder: target=215 temp=215.0 pwm=0.490
Stats 4666.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3773156 bytes_read=1850047 bytes_retransmit=9 bytes_invalid=0 send_seq=102393 receive_seq=102393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=789774 sysload=0.05 cputime=248.873 memavail=1633816 print_time=4677.480 buffer_time=2.732 print_stall=10 extruder: target=215 temp=215.1 pwm=0.479
Stats 4667.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3773866 bytes_read=1850474 bytes_retransmit=9 bytes_invalid=0 send_seq=102415 receive_seq=102415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=789837 sysload=0.05 cputime=248.919 memavail=1634124 print_time=4678.239 buffer_time=2.491 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 4668.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3774521 bytes_read=1850905 bytes_retransmit=9 bytes_invalid=0 send_seq=102438 receive_seq=102438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=789936 sysload=0.05 cputime=248.959 memavail=1634560 print_time=4679.022 buffer_time=2.273 print_stall=10 extruder: target=215 temp=215.1 pwm=0.435
Stats 4669.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3775170 bytes_read=1851292 bytes_retransmit=9 bytes_invalid=0 send_seq=102458 receive_seq=102458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.411 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=790000 sysload=0.05 cputime=249.016 memavail=1634876 print_time=4679.823 buffer_time=2.074 print_stall=10 extruder: target=215 temp=214.9 pwm=0.461
Stats 4670.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3776227 bytes_read=1851739 bytes_retransmit=9 bytes_invalid=0 send_seq=102484 receive_seq=102484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.234 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=790130 sysload=0.05 cputime=249.057 memavail=1634792 print_time=4681.472 buffer_time=2.722 print_stall=10 extruder: target=215 temp=214.9 pwm=0.533
Stats 4671.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3776969 bytes_read=1852160 bytes_retransmit=9 bytes_invalid=0 send_seq=102508 receive_seq=102508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=790196 sysload=0.05 cputime=249.119 memavail=1634564 print_time=4682.320 buffer_time=2.570 print_stall=10 extruder: target=215 temp=214.9 pwm=0.443
Stats 4672.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3777603 bytes_read=1852547 bytes_retransmit=9 bytes_invalid=0 send_seq=102528 receive_seq=102528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=790292 sysload=0.05 cputime=249.171 memavail=1634808 print_time=4683.183 buffer_time=2.433 print_stall=10 extruder: target=215 temp=214.9 pwm=0.443
Stats 4673.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3778286 bytes_read=1852984 bytes_retransmit=9 bytes_invalid=0 send_seq=102549 receive_seq=102549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=790358 sysload=0.05 cputime=249.227 memavail=1635076 print_time=4684.060 buffer_time=2.308 print_stall=10 extruder: target=215 temp=215.1 pwm=0.386
Stats 4674.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3778977 bytes_read=1853400 bytes_retransmit=9 bytes_invalid=0 send_seq=102572 receive_seq=102572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.374 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=790421 sysload=0.05 cputime=249.282 memavail=1634768 print_time=4684.945 buffer_time=2.193 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 4675.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3779679 bytes_read=1853797 bytes_retransmit=9 bytes_invalid=0 send_seq=102594 receive_seq=102594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.080 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=790487 sysload=0.04 cputime=249.341 memavail=1634552 print_time=4685.841 buffer_time=2.088 print_stall=10 extruder: target=215 temp=214.9 pwm=0.471
Stats 4676.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3780739 bytes_read=1854249 bytes_retransmit=9 bytes_invalid=0 send_seq=102622 receive_seq=102621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.506 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=790616 sysload=0.04 cputime=249.401 memavail=1634324 print_time=4687.662 buffer_time=2.908 print_stall=10 extruder: target=215 temp=215.0 pwm=0.392
Stats 4677.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3781444 bytes_read=1854681 bytes_retransmit=9 bytes_invalid=0 send_seq=102645 receive_seq=102645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=790712 sysload=0.04 cputime=249.460 memavail=1634300 print_time=4688.593 buffer_time=2.838 print_stall=10 extruder: target=215 temp=214.9 pwm=0.505
Stats 4678.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3782119 bytes_read=1855078 bytes_retransmit=9 bytes_invalid=0 send_seq=102664 receive_seq=102664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.029 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=790778 sysload=0.04 cputime=249.518 memavail=1634172 print_time=4689.521 buffer_time=2.765 print_stall=10 extruder: target=215 temp=214.9 pwm=0.448
Stats 4679.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3782838 bytes_read=1855510 bytes_retransmit=9 bytes_invalid=0 send_seq=102687 receive_seq=102687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=790841 sysload=0.04 cputime=249.573 memavail=1634200 print_time=4690.455 buffer_time=2.699 print_stall=10 extruder: target=215 temp=214.9 pwm=0.484
Stats 4680.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3783583 bytes_read=1855926 bytes_retransmit=9 bytes_invalid=0 send_seq=102710 receive_seq=102710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=57.0 mcu_temp: temp=42.7 sd_pos=790906 sysload=0.04 cputime=249.629 memavail=1633944 print_time=4691.395 buffer_time=2.638 print_stall=10 extruder: target=215 temp=215.1 pwm=0.391
Stats 4681.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3784306 bytes_read=1856333 bytes_retransmit=9 bytes_invalid=0 send_seq=102734 receive_seq=102734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=790970 sysload=0.04 cputime=249.689 memavail=1633608 print_time=4692.339 buffer_time=2.581 print_stall=10 extruder: target=215 temp=215.0 pwm=0.463
Stats 4682.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=3784987 bytes_read=1856760 bytes_retransmit=9 bytes_invalid=0 send_seq=102756 receive_seq=102756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=791067 sysload=0.04 cputime=249.747 memavail=1633368 print_time=4693.289 buffer_time=2.530 print_stall=10 extruder: target=215 temp=214.9 pwm=0.564
Stats 4683.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3785645 bytes_read=1857181 bytes_retransmit=9 bytes_invalid=0 send_seq=102777 receive_seq=102777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=791129 sysload=0.04 cputime=249.804 memavail=1633644 print_time=4694.241 buffer_time=2.482 print_stall=10 extruder: target=215 temp=215.0 pwm=0.449
Stats 4684.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3786326 bytes_read=1857578 bytes_retransmit=9 bytes_invalid=0 send_seq=102799 receive_seq=102799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=791194 sysload=0.04 cputime=249.861 memavail=1633308 print_time=4695.194 buffer_time=2.434 print_stall=10 extruder: target=215 temp=214.9 pwm=0.537
Stats 4685.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3787060 bytes_read=1858020 bytes_retransmit=9 bytes_invalid=0 send_seq=102824 receive_seq=102824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=791258 sysload=0.04 cputime=249.922 memavail=1633580 print_time=4696.147 buffer_time=2.387 print_stall=10 extruder: target=215 temp=215.1 pwm=0.376
Stats 4686.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3787757 bytes_read=1858431 bytes_retransmit=9 bytes_invalid=0 send_seq=102846 receive_seq=102846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=791324 sysload=0.04 cputime=249.978 memavail=1633560 print_time=4697.100 buffer_time=2.339 print_stall=10 extruder: target=215 temp=215.3 pwm=0.294
Stats 4687.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3788399 bytes_read=1858823 bytes_retransmit=9 bytes_invalid=0 send_seq=102867 receive_seq=102867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=791388 sysload=0.04 cputime=250.038 memavail=1633808 print_time=4698.053 buffer_time=2.290 print_stall=10 extruder: target=215 temp=215.0 pwm=0.473
Stats 4688.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3789128 bytes_read=1859280 bytes_retransmit=9 bytes_invalid=0 send_seq=102892 receive_seq=102892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=791486 sysload=0.04 cputime=250.079 memavail=1634072 print_time=4699.005 buffer_time=2.243 print_stall=10 extruder: target=215 temp=214.9 pwm=0.543
Stats 4689.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3789844 bytes_read=1859701 bytes_retransmit=9 bytes_invalid=0 send_seq=102916 receive_seq=102916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=791550 sysload=0.04 cputime=250.139 memavail=1633840 print_time=4699.956 buffer_time=2.193 print_stall=10 extruder: target=215 temp=214.9 pwm=0.560
Stats 4690.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3790501 bytes_read=1860093 bytes_retransmit=9 bytes_invalid=0 send_seq=102937 receive_seq=102937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=791616 sysload=0.03 cputime=250.201 memavail=1633840 print_time=4700.902 buffer_time=2.138 print_stall=10 extruder: target=215 temp=215.1 pwm=0.393
Stats 4691.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3791181 bytes_read=1860525 bytes_retransmit=9 bytes_invalid=0 send_seq=102960 receive_seq=102960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=791680 sysload=0.03 cputime=250.264 memavail=1633824 print_time=4701.844 buffer_time=2.079 print_stall=10 extruder: target=215 temp=214.9 pwm=0.538
Stats 4692.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=3791910 bytes_read=1860946 bytes_retransmit=9 bytes_invalid=0 send_seq=102984 receive_seq=102984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.060 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=791746 sysload=0.03 cputime=250.326 memavail=1633840 print_time=4702.781 buffer_time=2.015 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 4693.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3792944 bytes_read=1861378 bytes_retransmit=9 bytes_invalid=0 send_seq=103010 receive_seq=103010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.446 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=791909 sysload=0.03 cputime=250.390 memavail=1633856 print_time=4704.653 buffer_time=2.887 print_stall=10 extruder: target=215 temp=214.9 pwm=0.565
Stats 4694.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3793609 bytes_read=1861795 bytes_retransmit=9 bytes_invalid=0 send_seq=103030 receive_seq=103030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=791972 sysload=0.03 cputime=250.445 memavail=1633800 print_time=4705.559 buffer_time=2.792 print_stall=10 extruder: target=215 temp=215.1 pwm=0.433
Stats 4695.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3794332 bytes_read=1862211 bytes_retransmit=9 bytes_invalid=0 send_seq=103053 receive_seq=103053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=792038 sysload=0.03 cputime=250.502 memavail=1633856 print_time=4706.469 buffer_time=2.701 print_stall=10 extruder: target=215 temp=215.1 pwm=0.465
Stats 4696.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3795056 bytes_read=1862608 bytes_retransmit=9 bytes_invalid=0 send_seq=103075 receive_seq=103075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=792101 sysload=0.03 cputime=250.561 memavail=1634056 print_time=4707.368 buffer_time=2.601 print_stall=10 extruder: target=215 temp=214.9 pwm=0.579
Stats 4697.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=3795764 bytes_read=1863054 bytes_retransmit=9 bytes_invalid=0 send_seq=103098 receive_seq=103098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=792166 sysload=0.03 cputime=250.622 memavail=1633832 print_time=4708.258 buffer_time=2.490 print_stall=10 extruder: target=215 temp=214.9 pwm=0.552
Stats 4698.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3796426 bytes_read=1863461 bytes_retransmit=9 bytes_invalid=0 send_seq=103119 receive_seq=103119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=792262 sysload=0.03 cputime=250.658 memavail=1633848 print_time=4709.139 buffer_time=2.370 print_stall=10 extruder: target=215 temp=214.8 pwm=0.555
Stats 4699.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3797112 bytes_read=1863863 bytes_retransmit=9 bytes_invalid=0 send_seq=103142 receive_seq=103142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=792327 sysload=0.03 cputime=250.715 memavail=1633740 print_time=4710.007 buffer_time=2.237 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 4700.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3797818 bytes_read=1864304 bytes_retransmit=9 bytes_invalid=0 send_seq=103164 receive_seq=103164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.120 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=792391 sysload=0.03 cputime=250.774 memavail=1633976 print_time=4710.861 buffer_time=2.091 print_stall=10 extruder: target=215 temp=215.1 pwm=0.417
Stats 4701.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3798862 bytes_read=1864726 bytes_retransmit=9 bytes_invalid=0 send_seq=103191 receive_seq=103191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=792520 sysload=0.03 cputime=250.837 memavail=1633976 print_time=4712.523 buffer_time=2.752 print_stall=10 extruder: target=215 temp=215.0 pwm=0.477
Stats 4702.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3799625 bytes_read=1865123 bytes_retransmit=9 bytes_invalid=0 send_seq=103213 receive_seq=103213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.047 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=792618 sysload=0.03 cputime=250.878 memavail=1634036 print_time=4713.330 buffer_time=2.559 print_stall=10 extruder: target=215 temp=215.1 pwm=0.396
Stats 4703.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3800273 bytes_read=1865573 bytes_retransmit=9 bytes_invalid=0 send_seq=103235 receive_seq=103235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.530 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=792682 sysload=0.03 cputime=250.938 memavail=1634324 print_time=4714.121 buffer_time=2.349 print_stall=10 extruder: target=215 temp=215.0 pwm=0.505
Stats 4704.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3800929 bytes_read=1865955 bytes_retransmit=9 bytes_invalid=0 send_seq=103256 receive_seq=103256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=792748 sysload=0.03 cputime=250.992 memavail=1634616 print_time=4714.890 buffer_time=2.118 print_stall=10 extruder: target=215 temp=215.1 pwm=0.476
Stats 4705.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3801848 bytes_read=1866352 bytes_retransmit=9 bytes_invalid=0 send_seq=103280 receive_seq=103280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=792876 sysload=0.02 cputime=251.051 memavail=1634352 print_time=4716.361 buffer_time=2.588 print_stall=10 extruder: target=215 temp=215.2 pwm=0.362
Stats 4706.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3802623 bytes_read=1866795 bytes_retransmit=9 bytes_invalid=0 send_seq=103305 receive_seq=103305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=792971 sysload=0.02 cputime=251.109 memavail=1634348 print_time=4717.077 buffer_time=2.303 print_stall=10 extruder: target=215 temp=214.9 pwm=0.554
Stats 4707.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3803868 bytes_read=1867229 bytes_retransmit=9 bytes_invalid=0 send_seq=103335 receive_seq=103335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.170 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=793102 sysload=0.02 cputime=251.159 memavail=1634604 print_time=4718.375 buffer_time=2.600 print_stall=10 extruder: target=215 temp=215.2 pwm=0.336
Stats 4708.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=3804584 bytes_read=1867646 bytes_retransmit=9 bytes_invalid=0 send_seq=103358 receive_seq=103358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=793167 sysload=0.02 cputime=251.200 memavail=1634920 print_time=4718.984 buffer_time=2.209 print_stall=10 extruder: target=215 temp=215.1 pwm=0.512
Stats 4709.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=3805546 bytes_read=1868102 bytes_retransmit=9 bytes_invalid=0 send_seq=103383 receive_seq=103383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.028 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=793328 sysload=0.02 cputime=251.261 memavail=1634340 print_time=4720.093 buffer_time=2.317 print_stall=10 extruder: target=215 temp=215.1 pwm=0.512
Stats 4710.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=3806603 bytes_read=1868524 bytes_retransmit=9 bytes_invalid=0 send_seq=103410 receive_seq=103410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.520 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=793460 sysload=0.02 cputime=251.321 memavail=1634168 print_time=4721.020 buffer_time=2.243 print_stall=10 extruder: target=215 temp=215.1 pwm=0.461
Stats 4711.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=3807877 bytes_read=1868976 bytes_retransmit=9 bytes_invalid=0 send_seq=103440 receive_seq=103440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996354 heater_bed: target=55 temp=54.9 pwm=0.528 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=793881 sysload=0.02 cputime=251.367 memavail=1634152 print_time=4721.933 buffer_time=2.155 print_stall=10 extruder: target=215 temp=215.1 pwm=0.476
Stats 4712.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=3809265 bytes_read=1869457 bytes_retransmit=9 bytes_invalid=0 send_seq=103473 receive_seq=103473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=794230 sysload=0.02 cputime=251.431 memavail=1634104 print_time=4723.110 buffer_time=2.332 print_stall=10 extruder: target=215 temp=215.0 pwm=0.465
Stats 4713.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3809901 bytes_read=1869849 bytes_retransmit=9 bytes_invalid=0 send_seq=103491 receive_seq=103491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=794574 sysload=0.02 cputime=251.493 memavail=1634336 print_time=4724.194 buffer_time=2.416 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 4714.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3810416 bytes_read=1870236 bytes_retransmit=9 bytes_invalid=0 send_seq=103508 receive_seq=103508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=794796 sysload=0.02 cputime=251.556 memavail=1634416 print_time=4724.839 buffer_time=2.060 print_stall=10 extruder: target=215 temp=215.0 pwm=0.498
Stats 4715.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3811141 bytes_read=1870662 bytes_retransmit=9 bytes_invalid=0 send_seq=103530 receive_seq=103530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=57.5 mcu_temp: temp=41.6 sd_pos=795150 sysload=0.02 cputime=251.601 memavail=1634332 print_time=4725.924 buffer_time=2.144 print_stall=10 extruder: target=215 temp=215.0 pwm=0.527
Stats 4716.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3811945 bytes_read=1871059 bytes_retransmit=9 bytes_invalid=0 send_seq=103552 receive_seq=103552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=795537 sysload=0.02 cputime=251.665 memavail=1634080 print_time=4727.055 buffer_time=2.275 print_stall=10 extruder: target=215 temp=215.0 pwm=0.533
Stats 4717.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3812557 bytes_read=1871456 bytes_retransmit=9 bytes_invalid=0 send_seq=103571 receive_seq=103571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=795754 sysload=0.02 cputime=251.731 memavail=1633856 print_time=4727.799 buffer_time=2.019 print_stall=10 extruder: target=215 temp=215.1 pwm=0.471
Stats 4718.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000059 bytes_write=3813202 bytes_read=1871887 bytes_retransmit=9 bytes_invalid=0 send_seq=103591 receive_seq=103591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.173 rpi: temp=57.9 mcu_temp: temp=41.6 sd_pos=796105 sysload=0.02 cputime=251.768 memavail=1634136 print_time=4728.916 buffer_time=2.134 print_stall=10 extruder: target=215 temp=215.0 pwm=0.493
Stats 4719.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000059 bytes_write=3813856 bytes_read=1872269 bytes_retransmit=9 bytes_invalid=0 send_seq=103610 receive_seq=103610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=796462 sysload=0.02 cputime=251.826 memavail=1634060 print_time=4730.032 buffer_time=2.249 print_stall=10 extruder: target=215 temp=215.2 pwm=0.378
Stats 4720.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000059 bytes_write=3814509 bytes_read=1872681 bytes_retransmit=9 bytes_invalid=0 send_seq=103632 receive_seq=103632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.493 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=796725 sysload=0.02 cputime=251.884 memavail=1634184 print_time=4730.856 buffer_time=2.073 print_stall=10 extruder: target=215 temp=215.1 pwm=0.408
Stats 4721.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000059 bytes_write=3815221 bytes_read=1873102 bytes_retransmit=9 bytes_invalid=0 send_seq=103653 receive_seq=103653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.157 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=797080 sysload=0.02 cputime=251.932 memavail=1633880 print_time=4732.032 buffer_time=2.249 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 4722.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000059 bytes_write=3815871 bytes_read=1873484 bytes_retransmit=9 bytes_invalid=0 send_seq=103672 receive_seq=103672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.240 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=797329 sysload=0.02 cputime=251.988 memavail=1634304 print_time=4733.160 buffer_time=2.376 print_stall=10 extruder: target=215 temp=215.1 pwm=0.467
Stats 4723.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3816410 bytes_read=1873896 bytes_retransmit=9 bytes_invalid=0 send_seq=103691 receive_seq=103691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=797488 sysload=0.02 cputime=252.042 memavail=1634276 print_time=4733.840 buffer_time=2.056 print_stall=10 extruder: target=215 temp=215.3 pwm=0.400
Stats 4724.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3816976 bytes_read=1874302 bytes_retransmit=9 bytes_invalid=0 send_seq=103709 receive_seq=103709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=797778 sysload=0.02 cputime=252.101 memavail=1633992 print_time=4735.091 buffer_time=2.306 print_stall=10 extruder: target=215 temp=215.1 pwm=0.415
Stats 4725.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3817650 bytes_read=1874689 bytes_retransmit=9 bytes_invalid=0 send_seq=103729 receive_seq=103729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=798033 sysload=0.02 cputime=252.162 memavail=1633956 print_time=4736.219 buffer_time=2.434 print_stall=10 extruder: target=215 temp=215.1 pwm=0.512
Stats 4726.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3818123 bytes_read=1875066 bytes_retransmit=9 bytes_invalid=0 send_seq=103744 receive_seq=103744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=798194 sysload=0.02 cputime=252.216 memavail=1633980 print_time=4736.899 buffer_time=2.113 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 4727.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3819017 bytes_read=1875502 bytes_retransmit=9 bytes_invalid=0 send_seq=103768 receive_seq=103768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=798453 sysload=0.02 cputime=252.271 memavail=1633640 print_time=4737.807 buffer_time=2.021 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 4728.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3819901 bytes_read=1875919 bytes_retransmit=9 bytes_invalid=0 send_seq=103791 receive_seq=103791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=798618 sysload=0.02 cputime=252.312 memavail=1633696 print_time=4738.867 buffer_time=2.080 print_stall=10 extruder: target=215 temp=215.0 pwm=0.446
Stats 4729.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3820847 bytes_read=1876341 bytes_retransmit=9 bytes_invalid=0 send_seq=103815 receive_seq=103815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=798782 sysload=0.02 cputime=252.372 memavail=1633316 print_time=4740.182 buffer_time=2.393 print_stall=10 extruder: target=215 temp=215.1 pwm=0.446
Stats 4730.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3821411 bytes_read=1876747 bytes_retransmit=9 bytes_invalid=0 send_seq=103833 receive_seq=103833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=798845 sysload=0.02 cputime=252.423 memavail=1633692 print_time=4740.930 buffer_time=2.141 print_stall=10 extruder: target=215 temp=215.0 pwm=0.501
Stats 4731.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3822316 bytes_read=1877154 bytes_retransmit=9 bytes_invalid=0 send_seq=103857 receive_seq=103857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=798975 sysload=0.02 cputime=252.463 memavail=1633384 print_time=4742.545 buffer_time=2.755 print_stall=10 extruder: target=215 temp=215.2 pwm=0.404
Stats 4732.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3823018 bytes_read=1877571 bytes_retransmit=9 bytes_invalid=0 send_seq=103880 receive_seq=103880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=799068 sysload=0.02 cputime=252.524 memavail=1633708 print_time=4743.417 buffer_time=2.626 print_stall=10 extruder: target=215 temp=215.1 pwm=0.402
Stats 4733.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3823633 bytes_read=1878002 bytes_retransmit=9 bytes_invalid=0 send_seq=103900 receive_seq=103900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.681 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=799129 sysload=0.02 cputime=252.573 memavail=1633624 print_time=4744.326 buffer_time=2.535 print_stall=10 extruder: target=215 temp=215.1 pwm=0.493
Stats 4734.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3824268 bytes_read=1878394 bytes_retransmit=9 bytes_invalid=0 send_seq=103921 receive_seq=103921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=799193 sysload=0.02 cputime=252.609 memavail=1633616 print_time=4745.265 buffer_time=2.473 print_stall=10 extruder: target=215 temp=215.1 pwm=0.438
Stats 4735.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3824868 bytes_read=1878801 bytes_retransmit=9 bytes_invalid=0 send_seq=103942 receive_seq=103942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=799257 sysload=0.01 cputime=252.647 memavail=1633596 print_time=4746.233 buffer_time=2.441 print_stall=10 extruder: target=215 temp=215.2 pwm=0.398
Stats 4736.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3825489 bytes_read=1879227 bytes_retransmit=9 bytes_invalid=0 send_seq=103964 receive_seq=103964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=799323 sysload=0.01 cputime=252.701 memavail=1633580 print_time=4746.846 buffer_time=2.053 print_stall=10 extruder: target=215 temp=215.1 pwm=0.486
Stats 4737.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3826466 bytes_read=1879639 bytes_retransmit=9 bytes_invalid=0 send_seq=103989 receive_seq=103989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.2 sd_pos=799483 sysload=0.01 cputime=252.755 memavail=1632872 print_time=4748.194 buffer_time=2.400 print_stall=10 extruder: target=215 temp=215.0 pwm=0.458
Stats 4738.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3827384 bytes_read=1880092 bytes_retransmit=9 bytes_invalid=0 send_seq=104014 receive_seq=104014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.067 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=799611 sysload=0.01 cputime=252.796 memavail=1633376 print_time=4749.648 buffer_time=2.854 print_stall=10 extruder: target=215 temp=215.0 pwm=0.458
Stats 4739.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3827982 bytes_read=1880508 bytes_retransmit=9 bytes_invalid=0 send_seq=104034 receive_seq=104034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=799677 sysload=0.01 cputime=252.852 memavail=1633620 print_time=4750.739 buffer_time=2.944 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 4740.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3828648 bytes_read=1880900 bytes_retransmit=9 bytes_invalid=0 send_seq=104055 receive_seq=104055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=799741 sysload=0.01 cputime=252.906 memavail=1633436 print_time=4751.851 buffer_time=3.056 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 4741.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3828949 bytes_read=1881292 bytes_retransmit=9 bytes_invalid=0 send_seq=104073 receive_seq=104073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=799741 sysload=0.01 cputime=252.957 memavail=1633460 print_time=4751.851 buffer_time=2.055 print_stall=10 extruder: target=215 temp=215.2 pwm=0.402
Stats 4742.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=3829633 bytes_read=1881723 bytes_retransmit=9 bytes_invalid=0 send_seq=104096 receive_seq=104096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.758 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=799807 sysload=0.01 cputime=253.012 memavail=1633656 print_time=4752.985 buffer_time=2.189 print_stall=10 extruder: target=215 temp=215.0 pwm=0.535
Stats 4743.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3830279 bytes_read=1882125 bytes_retransmit=9 bytes_invalid=0 send_seq=104116 receive_seq=104116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.032 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=799871 sysload=0.01 cputime=253.065 memavail=1633408 print_time=4754.131 buffer_time=2.334 print_stall=10 extruder: target=215 temp=215.1 pwm=0.457
Stats 4744.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3830926 bytes_read=1882537 bytes_retransmit=9 bytes_invalid=0 send_seq=104138 receive_seq=104138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.175 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=799937 sysload=0.01 cputime=253.121 memavail=1633608 print_time=4755.289 buffer_time=2.492 print_stall=10 extruder: target=215 temp=215.1 pwm=0.431
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4745.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3831562 bytes_read=1882963 bytes_retransmit=9 bytes_invalid=0 send_seq=104160 receive_seq=104160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=799969 sysload=0.01 cputime=253.175 memavail=1633660 print_time=4756.217 buffer_time=2.419 print_stall=10 extruder: target=215 temp=214.8 pwm=0.610
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4746.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3832284 bytes_read=1883365 bytes_retransmit=9 bytes_invalid=0 send_seq=104183 receive_seq=104183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.503 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=800064 sysload=0.01 cputime=253.228 memavail=1633860 print_time=4757.646 buffer_time=2.847 print_stall=10 extruder: target=215 temp=215.0 pwm=0.398
Stats 4747.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3832921 bytes_read=1883777 bytes_retransmit=9 bytes_invalid=0 send_seq=104205 receive_seq=104205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.425 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=800158 sysload=0.01 cputime=253.282 memavail=1633376 print_time=4758.845 buffer_time=3.045 print_stall=10 extruder: target=215 temp=214.9 pwm=0.461
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4748.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3833193 bytes_read=1884183 bytes_retransmit=9 bytes_invalid=0 send_seq=104220 receive_seq=104220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=800158 sysload=0.01 cputime=253.320 memavail=1633656 print_time=4758.845 buffer_time=2.044 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4749.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3833866 bytes_read=1884580 bytes_retransmit=9 bytes_invalid=0 send_seq=104242 receive_seq=104242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.522 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=800257 sysload=0.01 cputime=253.377 memavail=1633820 print_time=4759.813 buffer_time=2.011 print_stall=10 extruder: target=215 temp=214.9 pwm=0.528
Stats 4750.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3834873 bytes_read=1885035 bytes_retransmit=9 bytes_invalid=0 send_seq=104269 receive_seq=104269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.819 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=800390 sysload=0.01 cputime=253.434 memavail=1633864 print_time=4761.756 buffer_time=2.955 print_stall=10 extruder: target=215 temp=215.1 pwm=0.423
Stats 4751.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3835545 bytes_read=1885466 bytes_retransmit=9 bytes_invalid=0 send_seq=104292 receive_seq=104292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.247 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=800520 sysload=0.01 cputime=253.489 memavail=1634064 print_time=4762.071 buffer_time=2.269 print_stall=10 extruder: target=215 temp=215.1 pwm=0.365
Stats 4752.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3836980 bytes_read=1885928 bytes_retransmit=9 bytes_invalid=0 send_seq=104327 receive_seq=104327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.156 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=800682 sysload=0.01 cputime=253.550 memavail=1633616 print_time=4763.778 buffer_time=2.976 print_stall=10 extruder: target=215 temp=215.1 pwm=0.390
Stats 4753.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3837568 bytes_read=1886350 bytes_retransmit=9 bytes_invalid=0 send_seq=104348 receive_seq=104348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=800747 sysload=0.01 cputime=253.602 memavail=1633576 print_time=4765.011 buffer_time=3.208 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 4754.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3837908 bytes_read=1886756 bytes_retransmit=9 bytes_invalid=0 send_seq=104366 receive_seq=104366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=43.2 sd_pos=800747 sysload=0.01 cputime=253.650 memavail=1633876 print_time=4765.011 buffer_time=2.207 print_stall=10 extruder: target=215 temp=215.0 pwm=0.416
Stats 4755.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3838602 bytes_read=1887148 bytes_retransmit=9 bytes_invalid=0 send_seq=104387 receive_seq=104387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=800843 sysload=0.01 cputime=253.706 memavail=1633868 print_time=4766.258 buffer_time=2.453 print_stall=10 extruder: target=215 temp=215.2 pwm=0.260
Stats 4756.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3839300 bytes_read=1887565 bytes_retransmit=9 bytes_invalid=0 send_seq=104410 receive_seq=104410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=800909 sysload=0.01 cputime=253.759 memavail=1633832 print_time=4767.490 buffer_time=2.685 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 4757.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3839975 bytes_read=1887996 bytes_retransmit=9 bytes_invalid=0 send_seq=104433 receive_seq=104433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=800973 sysload=0.01 cputime=253.813 memavail=1633528 print_time=4768.731 buffer_time=2.925 print_stall=10 extruder: target=215 temp=214.9 pwm=0.552
Stats 4758.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=3840587 bytes_read=1888408 bytes_retransmit=9 bytes_invalid=0 send_seq=104455 receive_seq=104455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.531 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=801039 sysload=0.01 cputime=253.865 memavail=1633268 print_time=4769.971 buffer_time=3.165 print_stall=10 extruder: target=215 temp=214.9 pwm=0.492
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4759.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=3840902 bytes_read=1888790 bytes_retransmit=9 bytes_invalid=0 send_seq=104471 receive_seq=104471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=801039 sysload=0.01 cputime=253.920 memavail=1633304 print_time=4769.971 buffer_time=2.165 print_stall=10 extruder: target=215 temp=215.1 pwm=0.348
Stats 4760.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=3841768 bytes_read=1889226 bytes_retransmit=9 bytes_invalid=0 send_seq=104495 receive_seq=104495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=801168 sysload=0.01 cputime=253.975 memavail=1633316 print_time=4771.552 buffer_time=2.746 print_stall=10 extruder: target=215 temp=215.0 pwm=0.482
Stats 4761.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=3842490 bytes_read=1889623 bytes_retransmit=9 bytes_invalid=0 send_seq=104517 receive_seq=104517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=801232 sysload=0.01 cputime=254.028 memavail=1633264 print_time=4772.316 buffer_time=2.508 print_stall=10 extruder: target=215 temp=215.0 pwm=0.431
Stats 4762.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3843032 bytes_read=1890050 bytes_retransmit=9 bytes_invalid=0 send_seq=104536 receive_seq=104536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=801298 sysload=0.01 cputime=254.083 memavail=1633260 print_time=4773.059 buffer_time=2.250 print_stall=10 extruder: target=215 temp=215.0 pwm=0.497
TMC 'stepper_z' reports DRV_STATUS: c0120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1 stst=1
Stats 4763.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3843956 bytes_read=1890461 bytes_retransmit=9 bytes_invalid=0 send_seq=104560 receive_seq=104560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.488 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=801427 sysload=0.01 cputime=254.136 memavail=1632968 print_time=4774.479 buffer_time=2.671 print_stall=10 extruder: target=215 temp=214.9 pwm=0.497
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 4764.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3844676 bytes_read=1890853 bytes_retransmit=9 bytes_invalid=0 send_seq=104583 receive_seq=104583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.302 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=801491 sysload=0.01 cputime=254.192 memavail=1632932 print_time=4775.157 buffer_time=2.349 print_stall=10 extruder: target=215 temp=214.9 pwm=0.549
Stats 4765.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3845226 bytes_read=1891253 bytes_retransmit=9 bytes_invalid=0 send_seq=104602 receive_seq=104602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.342 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=801590 sysload=0.01 cputime=254.245 memavail=1633244 print_time=4775.815 buffer_time=2.006 print_stall=10 extruder: target=215 temp=215.1 pwm=0.450
Stats 4766.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3846220 bytes_read=1891680 bytes_retransmit=9 bytes_invalid=0 send_seq=104629 receive_seq=104629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.109 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=801719 sysload=0.01 cputime=254.304 memavail=1633392 print_time=4777.059 buffer_time=2.249 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 4767.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3847190 bytes_read=1892092 bytes_retransmit=9 bytes_invalid=0 send_seq=104654 receive_seq=104654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.276 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=801849 sysload=0.01 cputime=254.359 memavail=1633444 print_time=4778.300 buffer_time=2.489 print_stall=10 extruder: target=215 temp=214.8 pwm=0.534
Stats 4768.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3847829 bytes_read=1892529 bytes_retransmit=9 bytes_invalid=0 send_seq=104675 receive_seq=104675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=801945 sysload=0.01 cputime=254.411 memavail=1633440 print_time=4778.932 buffer_time=2.121 print_stall=10 extruder: target=215 temp=214.9 pwm=0.479
Stats 4769.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3848794 bytes_read=1892955 bytes_retransmit=9 bytes_invalid=0 send_seq=104700 receive_seq=104700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.169 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=802108 sysload=0.01 cputime=254.467 memavail=1633196 print_time=4780.238 buffer_time=2.426 print_stall=10 extruder: target=215 temp=214.7 pwm=0.642
Stats 4770.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3849378 bytes_read=1893342 bytes_retransmit=9 bytes_invalid=0 send_seq=104720 receive_seq=104720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=802173 sysload=0.01 cputime=254.517 memavail=1633132 print_time=4780.909 buffer_time=2.096 print_stall=10 extruder: target=215 temp=215.2 pwm=0.242
Stats 4771.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3850359 bytes_read=1893784 bytes_retransmit=9 bytes_invalid=0 send_seq=104745 receive_seq=104745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=802335 sysload=0.01 cputime=254.573 memavail=1633412 print_time=4782.255 buffer_time=2.442 print_stall=10 extruder: target=215 temp=214.9 pwm=0.447
Stats 4772.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=3850994 bytes_read=1894190 bytes_retransmit=9 bytes_invalid=0 send_seq=104766 receive_seq=104766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.1 sd_pos=802399 sysload=0.01 cputime=254.624 memavail=1633440 print_time=4782.901 buffer_time=2.088 print_stall=10 extruder: target=215 temp=214.7 pwm=0.539
Stats 4773.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3851939 bytes_read=1894622 bytes_retransmit=9 bytes_invalid=0 send_seq=104792 receive_seq=104792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=802525 sysload=0.01 cputime=254.682 memavail=1633672 print_time=4784.485 buffer_time=2.671 print_stall=10 extruder: target=215 temp=214.7 pwm=0.559
Stats 4774.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3852555 bytes_read=1895039 bytes_retransmit=9 bytes_invalid=0 send_seq=104812 receive_seq=104812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=802616 sysload=0.01 cputime=254.734 memavail=1633912 print_time=4784.895 buffer_time=2.081 print_stall=10 extruder: target=215 temp=214.8 pwm=0.499
Stats 4775.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3853793 bytes_read=1895495 bytes_retransmit=9 bytes_invalid=0 send_seq=104843 receive_seq=104843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.163 rpi: temp=57.0 mcu_temp: temp=43.2 sd_pos=802838 sysload=0.01 cputime=254.790 memavail=1634480 print_time=4785.854 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.1 pwm=0.361
Stats 4776.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3855267 bytes_read=1895952 bytes_retransmit=9 bytes_invalid=0 send_seq=104877 receive_seq=104877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.052 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=803220 sysload=0.01 cputime=254.850 memavail=1634520 print_time=4787.050 buffer_time=2.235 print_stall=10 extruder: target=215 temp=215.1 pwm=0.371
Stats 4777.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3856555 bytes_read=1896424 bytes_retransmit=9 bytes_invalid=0 send_seq=104908 receive_seq=104908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=803474 sysload=0.01 cputime=254.906 memavail=1635048 print_time=4787.861 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.1 pwm=0.370
Stats 4778.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3858150 bytes_read=1896910 bytes_retransmit=9 bytes_invalid=0 send_seq=104942 receive_seq=104942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=803725 sysload=0.01 cputime=254.958 memavail=1634704 print_time=4788.869 buffer_time=2.052 print_stall=10 extruder: target=215 temp=214.9 pwm=0.514
Stats 4779.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3859415 bytes_read=1897347 bytes_retransmit=9 bytes_invalid=0 send_seq=104972 receive_seq=104972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.721 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=803915 sysload=0.01 cputime=255.013 memavail=1635064 print_time=4789.878 buffer_time=2.060 print_stall=10 extruder: target=215 temp=214.9 pwm=0.609
Stats 4780.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3861014 bytes_read=1897839 bytes_retransmit=9 bytes_invalid=0 send_seq=105007 receive_seq=105007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=804270 sysload=0.09 cputime=255.071 memavail=1635152 print_time=4791.077 buffer_time=2.258 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 4781.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3862051 bytes_read=1898270 bytes_retransmit=9 bytes_invalid=0 send_seq=105033 receive_seq=105033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.437 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=804371 sysload=0.09 cputime=255.125 memavail=1634588 print_time=4792.181 buffer_time=2.362 print_stall=10 extruder: target=215 temp=215.0 pwm=0.521
Stats 4782.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3862650 bytes_read=1898667 bytes_retransmit=9 bytes_invalid=0 send_seq=105055 receive_seq=105055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.055 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=804463 sysload=0.09 cputime=255.177 memavail=1634376 print_time=4793.115 buffer_time=2.295 print_stall=10 extruder: target=215 temp=215.1 pwm=0.423
Stats 4783.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3863231 bytes_read=1899099 bytes_retransmit=9 bytes_invalid=0 send_seq=105075 receive_seq=105075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=804527 sysload=0.09 cputime=255.231 memavail=1634440 print_time=4793.970 buffer_time=2.150 print_stall=10 extruder: target=215 temp=215.1 pwm=0.485
Stats 4784.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3864130 bytes_read=1899520 bytes_retransmit=9 bytes_invalid=0 send_seq=105099 receive_seq=105099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.176 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=804655 sysload=0.09 cputime=255.282 memavail=1634456 print_time=4795.598 buffer_time=2.778 print_stall=10 extruder: target=215 temp=215.2 pwm=0.411
Stats 4785.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3864809 bytes_read=1899907 bytes_retransmit=9 bytes_invalid=0 send_seq=105119 receive_seq=105119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.693 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=804750 sysload=0.08 cputime=255.333 memavail=1634156 print_time=4796.364 buffer_time=2.543 print_stall=10 extruder: target=215 temp=215.1 pwm=0.414
Stats 4786.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3865391 bytes_read=1900324 bytes_retransmit=9 bytes_invalid=0 send_seq=105139 receive_seq=105139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.469 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=804813 sysload=0.08 cputime=255.386 memavail=1633936 print_time=4797.044 buffer_time=2.222 print_stall=10 extruder: target=215 temp=215.1 pwm=0.512
Stats 4787.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3866403 bytes_read=1900755 bytes_retransmit=9 bytes_invalid=0 send_seq=105165 receive_seq=105165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.8 pwm=0.819 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=804970 sysload=0.08 cputime=255.437 memavail=1634164 print_time=4798.266 buffer_time=2.444 print_stall=10 extruder: target=215 temp=215.0 pwm=0.502
Stats 4788.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3867259 bytes_read=1901172 bytes_retransmit=9 bytes_invalid=0 send_seq=105188 receive_seq=105188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.0 sd_pos=805130 sysload=0.08 cputime=255.475 memavail=1634156 print_time=4799.228 buffer_time=2.405 print_stall=10 extruder: target=215 temp=215.1 pwm=0.393
Stats 4789.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3868432 bytes_read=1901629 bytes_retransmit=9 bytes_invalid=0 send_seq=105216 receive_seq=105216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=805228 sysload=0.08 cputime=255.530 memavail=1634364 print_time=4800.089 buffer_time=2.266 print_stall=10 extruder: target=215 temp=215.0 pwm=0.462
Stats 4790.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3871469 bytes_read=1902225 bytes_retransmit=9 bytes_invalid=0 send_seq=105275 receive_seq=105275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.282 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=806006 sysload=0.07 cputime=255.595 memavail=1634428 print_time=4801.531 buffer_time=2.707 print_stall=10 extruder: target=215 temp=214.9 pwm=0.511
Stats 4791.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3873700 bytes_read=1902747 bytes_retransmit=9 bytes_invalid=0 send_seq=105322 receive_seq=105322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.5 sd_pos=806676 sysload=0.07 cputime=255.645 memavail=1634420 print_time=4802.088 buffer_time=2.264 print_stall=10 extruder: target=215 temp=215.2 pwm=0.302
Stats 4792.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3877390 bytes_read=1903424 bytes_retransmit=9 bytes_invalid=0 send_seq=105394 receive_seq=105394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.403 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=807854 sysload=0.07 cputime=255.718 memavail=1634384 print_time=4803.167 buffer_time=2.343 print_stall=10 extruder: target=215 temp=215.1 pwm=0.503
Stats 4793.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=3879949 bytes_read=1903996 bytes_retransmit=9 bytes_invalid=0 send_seq=105445 receive_seq=105445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=808486 sysload=0.07 cputime=255.784 memavail=1634440 print_time=4804.219 buffer_time=2.394 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 4794.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=3882336 bytes_read=1904528 bytes_retransmit=9 bytes_invalid=0 send_seq=105494 receive_seq=105494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=808934 sysload=0.07 cputime=255.844 memavail=1634432 print_time=4805.165 buffer_time=2.339 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 4795.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=3884235 bytes_read=1905050 bytes_retransmit=9 bytes_invalid=0 send_seq=105535 receive_seq=105535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.239 rpi: temp=57.5 mcu_temp: temp=42.8 sd_pos=809497 sysload=0.07 cputime=255.906 memavail=1634432 print_time=4805.973 buffer_time=2.147 print_stall=10 extruder: target=215 temp=215.2 pwm=0.416
Stats 4796.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=3885369 bytes_read=1905496 bytes_retransmit=9 bytes_invalid=0 send_seq=105564 receive_seq=105564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.579 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=809845 sysload=0.07 cputime=255.964 memavail=1634376 print_time=4807.023 buffer_time=2.196 print_stall=10 extruder: target=215 temp=215.0 pwm=0.530
Stats 4797.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=3886078 bytes_read=1905888 bytes_retransmit=9 bytes_invalid=0 send_seq=105585 receive_seq=105585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.429 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=810161 sysload=0.07 cputime=256.018 memavail=1634416 print_time=4808.037 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.2 pwm=0.418
Stats 4798.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3886706 bytes_read=1906315 bytes_retransmit=9 bytes_invalid=0 send_seq=105604 receive_seq=105604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=810519 sysload=0.07 cputime=256.059 memavail=1634392 print_time=4809.114 buffer_time=2.286 print_stall=10 extruder: target=215 temp=214.9 pwm=0.602
Stats 4799.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3887477 bytes_read=1906742 bytes_retransmit=9 bytes_invalid=0 send_seq=105627 receive_seq=105627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=810875 sysload=0.07 cputime=256.117 memavail=1633848 print_time=4810.192 buffer_time=2.363 print_stall=10 extruder: target=215 temp=215.1 pwm=0.481
Stats 4800.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3888187 bytes_read=1907144 bytes_retransmit=9 bytes_invalid=0 send_seq=105650 receive_seq=105650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.311 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=811163 sysload=0.06 cputime=256.175 memavail=1633912 print_time=4810.959 buffer_time=2.130 print_stall=10 extruder: target=215 temp=214.9 pwm=0.564
Stats 4801.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3888841 bytes_read=1907566 bytes_retransmit=9 bytes_invalid=0 send_seq=105671 receive_seq=105671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.298 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=811507 sysload=0.06 cputime=256.232 memavail=1633692 print_time=4812.010 buffer_time=2.180 print_stall=10 extruder: target=215 temp=215.0 pwm=0.544
Stats 4802.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3889486 bytes_read=1907967 bytes_retransmit=9 bytes_invalid=0 send_seq=105691 receive_seq=105691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.334 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=811858 sysload=0.06 cputime=256.289 memavail=1633412 print_time=4813.120 buffer_time=2.289 print_stall=10 extruder: target=215 temp=214.9 pwm=0.586
Stats 4803.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3890072 bytes_read=1908374 bytes_retransmit=9 bytes_invalid=0 send_seq=105712 receive_seq=105712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.204 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=812083 sysload=0.06 cputime=256.344 memavail=1633420 print_time=4813.859 buffer_time=2.028 print_stall=10 extruder: target=215 temp=214.9 pwm=0.539
Stats 4804.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3891046 bytes_read=1908831 bytes_retransmit=9 bytes_invalid=0 send_seq=105740 receive_seq=105740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=812478 sysload=0.06 cputime=256.390 memavail=1630620 print_time=4814.970 buffer_time=2.138 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 4805.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3891793 bytes_read=1909247 bytes_retransmit=9 bytes_invalid=0 send_seq=105763 receive_seq=105763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=812765 sysload=0.06 cputime=256.449 memavail=1630612 print_time=4816.016 buffer_time=2.184 print_stall=10 extruder: target=215 temp=214.9 pwm=0.560
Stats 4806.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3892344 bytes_read=1909624 bytes_retransmit=9 bytes_invalid=0 send_seq=105781 receive_seq=105781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.452 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=812982 sysload=0.06 cputime=256.504 memavail=1630596 print_time=4816.940 buffer_time=2.107 print_stall=10 extruder: target=215 temp=215.0 pwm=0.435
Stats 4807.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3892957 bytes_read=1910046 bytes_retransmit=9 bytes_invalid=0 send_seq=105802 receive_seq=105802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=813199 sysload=0.06 cputime=256.552 memavail=1622576 print_time=4817.874 buffer_time=2.041 print_stall=10 extruder: target=215 temp=215.0 pwm=0.456
Stats 4808.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000065 bytes_write=3893543 bytes_read=1910457 bytes_retransmit=9 bytes_invalid=0 send_seq=105821 receive_seq=105821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.162 rpi: temp=58.4 mcu_temp: temp=41.9 sd_pos=813459 sysload=0.06 cputime=256.605 memavail=1628156 print_time=4819.057 buffer_time=2.223 print_stall=10 extruder: target=215 temp=215.0 pwm=0.423
Stats 4809.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000065 bytes_write=3894170 bytes_read=1910854 bytes_retransmit=9 bytes_invalid=0 send_seq=105843 receive_seq=105843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=813684 sysload=0.06 cputime=256.662 memavail=1627672 print_time=4819.981 buffer_time=2.146 print_stall=10 extruder: target=215 temp=214.9 pwm=0.499
Stats 4810.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000065 bytes_write=3894797 bytes_read=1911276 bytes_retransmit=9 bytes_invalid=0 send_seq=105864 receive_seq=105864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.436 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=813980 sysload=0.13 cputime=256.719 memavail=1627716 print_time=4821.104 buffer_time=2.269 print_stall=10 extruder: target=215 temp=214.9 pwm=0.541
Stats 4811.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000065 bytes_write=3897848 bytes_read=1911877 bytes_retransmit=9 bytes_invalid=0 send_seq=105924 receive_seq=105924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.473 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=815127 sysload=0.13 cputime=256.796 memavail=1627900 print_time=4821.983 buffer_time=2.148 print_stall=10 extruder: target=215 temp=214.9 pwm=0.458
Stats 4812.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000065 bytes_write=3899577 bytes_read=1912359 bytes_retransmit=9 bytes_invalid=0 send_seq=105963 receive_seq=105963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=815445 sysload=0.13 cputime=256.840 memavail=1628660 print_time=4822.884 buffer_time=2.048 print_stall=10 extruder: target=215 temp=214.9 pwm=0.522
Stats 4813.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=3902632 bytes_read=1912991 bytes_retransmit=9 bytes_invalid=0 send_seq=106023 receive_seq=106023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.344 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=816302 sysload=0.13 cputime=256.898 memavail=1628496 print_time=4823.875 buffer_time=2.038 print_stall=10 extruder: target=215 temp=215.1 pwm=0.352
Stats 4814.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=3906065 bytes_read=1913627 bytes_retransmit=9 bytes_invalid=0 send_seq=106090 receive_seq=106090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.048 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=817514 sysload=0.13 cputime=256.967 memavail=1628712 print_time=4824.913 buffer_time=2.076 print_stall=10 extruder: target=215 temp=215.1 pwm=0.369
Stats 4815.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=3908499 bytes_read=1914164 bytes_retransmit=9 bytes_invalid=0 send_seq=106140 receive_seq=106140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=818049 sysload=0.20 cputime=257.003 memavail=1622404 print_time=4825.837 buffer_time=1.999 print_stall=10 extruder: target=215 temp=215.0 pwm=0.537
Stats 4816.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=3909551 bytes_read=1914631 bytes_retransmit=9 bytes_invalid=0 send_seq=106170 receive_seq=106170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.506 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=818212 sysload=0.20 cputime=257.052 memavail=1627220 print_time=4827.121 buffer_time=2.283 print_stall=10 extruder: target=215 temp=215.0 pwm=0.494
Stats 4817.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=3910652 bytes_read=1915077 bytes_retransmit=9 bytes_invalid=0 send_seq=106199 receive_seq=106199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=818377 sysload=0.20 cputime=257.108 memavail=1626964 print_time=4828.072 buffer_time=2.233 print_stall=10 extruder: target=215 temp=214.9 pwm=0.476
Stats 4818.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=3911640 bytes_read=1915515 bytes_retransmit=9 bytes_invalid=0 send_seq=106226 receive_seq=106226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.4 sd_pos=818508 sysload=0.20 cputime=257.146 memavail=1627040 print_time=4829.272 buffer_time=2.433 print_stall=10 extruder: target=215 temp=215.0 pwm=0.473
Stats 4819.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=3912249 bytes_read=1915937 bytes_retransmit=9 bytes_invalid=0 send_seq=106247 receive_seq=106247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=818606 sysload=0.20 cputime=257.196 memavail=1627024 print_time=4829.958 buffer_time=2.119 print_stall=10 extruder: target=215 temp=215.1 pwm=0.364
Stats 4820.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=3913238 bytes_read=1916373 bytes_retransmit=9 bytes_invalid=0 send_seq=106274 receive_seq=106274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=818735 sysload=0.18 cputime=257.251 memavail=1627248 print_time=4831.486 buffer_time=2.647 print_stall=10 extruder: target=215 temp=215.1 pwm=0.375
Stats 4821.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=3913827 bytes_read=1916770 bytes_retransmit=9 bytes_invalid=0 send_seq=106296 receive_seq=106296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.2 pwm=0.023 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=818800 sysload=0.18 cputime=257.300 memavail=1627348 print_time=4832.313 buffer_time=2.472 print_stall=10 extruder: target=215 temp=214.9 pwm=0.575
Stats 4822.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=3914472 bytes_read=1917200 bytes_retransmit=9 bytes_invalid=0 send_seq=106319 receive_seq=106319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=818894 sysload=0.18 cputime=257.340 memavail=1626564 print_time=4833.182 buffer_time=2.341 print_stall=10 extruder: target=215 temp=215.2 pwm=0.338
Stats 4823.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3915085 bytes_read=1917615 bytes_retransmit=9 bytes_invalid=0 send_seq=106341 receive_seq=106341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.101 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=818960 sysload=0.18 cputime=257.378 memavail=1626208 print_time=4834.087 buffer_time=2.245 print_stall=10 extruder: target=215 temp=215.3 pwm=0.267
Stats 4824.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3915697 bytes_read=1918002 bytes_retransmit=9 bytes_invalid=0 send_seq=106363 receive_seq=106363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.625 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=819023 sysload=0.18 cputime=257.414 memavail=1621840 print_time=4835.022 buffer_time=2.180 print_stall=10 extruder: target=215 temp=214.9 pwm=0.606
Stats 4825.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3916326 bytes_read=1918427 bytes_retransmit=9 bytes_invalid=0 send_seq=106387 receive_seq=106387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.1 sd_pos=819089 sysload=0.17 cputime=257.464 memavail=1625852 print_time=4835.987 buffer_time=2.144 print_stall=10 extruder: target=215 temp=215.3 pwm=0.315
Stats 4826.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3917737 bytes_read=1918888 bytes_retransmit=9 bytes_invalid=0 send_seq=106420 receive_seq=106420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.2 pwm=0.101 rpi: temp=57.9 mcu_temp: temp=42.2 sd_pos=819312 sysload=0.17 cputime=257.508 memavail=1626656 print_time=4837.798 buffer_time=2.954 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 4827.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=3918362 bytes_read=1919285 bytes_retransmit=9 bytes_invalid=0 send_seq=106442 receive_seq=106442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=819377 sysload=0.17 cputime=257.559 memavail=1627388 print_time=4838.864 buffer_time=3.020 print_stall=10 extruder: target=215 temp=214.6 pwm=0.706
Stats 4828.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3918675 bytes_read=1919707 bytes_retransmit=9 bytes_invalid=0 send_seq=106460 receive_seq=106460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.148 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=819377 sysload=0.17 cputime=257.605 memavail=1627396 print_time=4838.864 buffer_time=2.019 print_stall=10 extruder: target=215 temp=214.8 pwm=0.483
Stats 4829.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3919321 bytes_read=1920118 bytes_retransmit=9 bytes_invalid=0 send_seq=106482 receive_seq=106482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.205 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=819441 sysload=0.17 cputime=257.658 memavail=1627104 print_time=4839.951 buffer_time=2.105 print_stall=10 extruder: target=215 temp=214.7 pwm=0.475
Stats 4830.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3919989 bytes_read=1920515 bytes_retransmit=9 bytes_invalid=0 send_seq=106504 receive_seq=106504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.2 pwm=0.040 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=819539 sysload=0.16 cputime=257.713 memavail=1627048 print_time=4841.058 buffer_time=2.212 print_stall=10 extruder: target=215 temp=214.7 pwm=0.587
Stats 4831.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3920639 bytes_read=1920942 bytes_retransmit=9 bytes_invalid=0 send_seq=106526 receive_seq=106526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=819600 sysload=0.16 cputime=257.765 memavail=1627000 print_time=4842.186 buffer_time=2.339 print_stall=10 extruder: target=215 temp=214.9 pwm=0.422
Stats 4832.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=3921293 bytes_read=1921348 bytes_retransmit=9 bytes_invalid=0 send_seq=106547 receive_seq=106547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.575 rpi: temp=57.9 mcu_temp: temp=42.3 sd_pos=819666 sysload=0.16 cputime=257.812 memavail=1627000 print_time=4843.326 buffer_time=2.478 print_stall=10 extruder: target=215 temp=214.9 pwm=0.414
Stats 4833.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3921970 bytes_read=1921765 bytes_retransmit=9 bytes_invalid=0 send_seq=106570 receive_seq=106570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=819729 sysload=0.16 cputime=257.850 memavail=1627040 print_time=4844.479 buffer_time=2.631 print_stall=10 extruder: target=215 temp=214.8 pwm=0.456
Stats 4834.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3922626 bytes_read=1922182 bytes_retransmit=9 bytes_invalid=0 send_seq=106590 receive_seq=106590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.553 rpi: temp=57.9 mcu_temp: temp=42.4 sd_pos=819792 sysload=0.16 cputime=257.900 memavail=1626764 print_time=4845.645 buffer_time=2.796 print_stall=10 extruder: target=215 temp=214.7 pwm=0.525
Stats 4835.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3923315 bytes_read=1922593 bytes_retransmit=9 bytes_invalid=0 send_seq=106612 receive_seq=106612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.186 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=819856 sysload=0.14 cputime=257.954 memavail=1626788 print_time=4846.825 buffer_time=2.975 print_stall=10 extruder: target=215 temp=215.0 pwm=0.323
Stats 4836.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3923852 bytes_read=1922985 bytes_retransmit=9 bytes_invalid=0 send_seq=106633 receive_seq=106633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.209 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=819954 sysload=0.14 cputime=258.005 memavail=1626556 print_time=4847.804 buffer_time=2.953 print_stall=10 extruder: target=215 temp=214.9 pwm=0.473
Stats 4837.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3924518 bytes_read=1923412 bytes_retransmit=9 bytes_invalid=0 send_seq=106655 receive_seq=106655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.589 rpi: temp=57.9 mcu_temp: temp=42.3 sd_pos=820018 sysload=0.14 cputime=258.055 memavail=1627048 print_time=4848.724 buffer_time=2.873 print_stall=10 extruder: target=215 temp=214.9 pwm=0.439
Stats 4838.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3925184 bytes_read=1923823 bytes_retransmit=9 bytes_invalid=0 send_seq=106674 receive_seq=106674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=820082 sysload=0.14 cputime=258.091 memavail=1627548 print_time=4849.677 buffer_time=2.825 print_stall=10 extruder: target=215 temp=214.8 pwm=0.511
Stats 4839.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3925766 bytes_read=1924215 bytes_retransmit=9 bytes_invalid=0 send_seq=106695 receive_seq=106695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=820143 sysload=0.14 cputime=258.144 memavail=1627556 print_time=4850.659 buffer_time=2.808 print_stall=10 extruder: target=215 temp=214.8 pwm=0.530
Stats 4840.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3926758 bytes_read=1924667 bytes_retransmit=9 bytes_invalid=0 send_seq=106722 receive_seq=106722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.003 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=820270 sysload=0.13 cputime=258.198 memavail=1627360 print_time=4852.128 buffer_time=3.275 print_stall=10 extruder: target=215 temp=214.9 pwm=0.464
Stats 4841.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3926998 bytes_read=1925043 bytes_retransmit=9 bytes_invalid=0 send_seq=106737 receive_seq=106737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=820270 sysload=0.13 cputime=258.249 memavail=1627308 print_time=4852.128 buffer_time=2.275 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 4842.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3928310 bytes_read=1925490 bytes_retransmit=9 bytes_invalid=0 send_seq=106769 receive_seq=106769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=820504 sysload=0.13 cputime=258.308 memavail=1627536 print_time=4852.901 buffer_time=2.047 print_stall=10 extruder: target=215 temp=215.1 pwm=0.420
Stats 4843.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3929099 bytes_read=1925942 bytes_retransmit=9 bytes_invalid=0 send_seq=106793 receive_seq=106793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.322 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=820567 sysload=0.13 cputime=258.364 memavail=1627824 print_time=4854.184 buffer_time=2.329 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 4844.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3929749 bytes_read=1926343 bytes_retransmit=9 bytes_invalid=0 send_seq=106813 receive_seq=106813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.032 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=820630 sysload=0.13 cputime=258.417 memavail=1627548 print_time=4855.417 buffer_time=2.562 print_stall=10 extruder: target=215 temp=215.0 pwm=0.571
Stats 4845.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3930399 bytes_read=1926735 bytes_retransmit=9 bytes_invalid=0 send_seq=106834 receive_seq=106834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.746 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=820691 sysload=0.12 cputime=258.472 memavail=1627292 print_time=4856.649 buffer_time=2.793 print_stall=10 extruder: target=215 temp=215.2 pwm=0.388
Stats 4846.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3931096 bytes_read=1927162 bytes_retransmit=9 bytes_invalid=0 send_seq=106856 receive_seq=106856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.513 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=820753 sysload=0.12 cputime=258.525 memavail=1627040 print_time=4857.882 buffer_time=3.025 print_stall=10 extruder: target=215 temp=215.1 pwm=0.457
Stats 4847.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3931326 bytes_read=1927538 bytes_retransmit=9 bytes_invalid=0 send_seq=106871 receive_seq=106871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=820753 sysload=0.12 cputime=258.572 memavail=1627044 print_time=4857.882 buffer_time=2.025 print_stall=10 extruder: target=215 temp=215.1 pwm=0.511
Stats 4848.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3932301 bytes_read=1927970 bytes_retransmit=9 bytes_invalid=0 send_seq=106897 receive_seq=106897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=820882 sysload=0.12 cputime=258.613 memavail=1627028 print_time=4859.484 buffer_time=2.626 print_stall=10 extruder: target=215 temp=215.0 pwm=0.602
Stats 4849.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3932955 bytes_read=1928392 bytes_retransmit=9 bytes_invalid=0 send_seq=106918 receive_seq=106918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.636 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=820945 sysload=0.12 cputime=258.663 memavail=1626976 print_time=4860.258 buffer_time=2.399 print_stall=10 extruder: target=215 temp=215.0 pwm=0.523
Stats 4850.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3933510 bytes_read=1928788 bytes_retransmit=9 bytes_invalid=0 send_seq=106937 receive_seq=106937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=821010 sysload=0.11 cputime=258.711 memavail=1626892 print_time=4861.013 buffer_time=2.154 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 4851.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3934505 bytes_read=1929205 bytes_retransmit=9 bytes_invalid=0 send_seq=106963 receive_seq=106963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=821139 sysload=0.11 cputime=258.750 memavail=1626880 print_time=4862.459 buffer_time=2.599 print_stall=10 extruder: target=215 temp=215.0 pwm=0.462
Stats 4852.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3935120 bytes_read=1929622 bytes_retransmit=9 bytes_invalid=0 send_seq=106983 receive_seq=106983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=821202 sysload=0.11 cputime=258.796 memavail=1627156 print_time=4863.150 buffer_time=2.289 print_stall=10 extruder: target=215 temp=215.0 pwm=0.462
Stats 4853.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3936050 bytes_read=1930063 bytes_retransmit=9 bytes_invalid=0 send_seq=107008 receive_seq=107008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.562 rpi: temp=57.9 mcu_temp: temp=42.2 sd_pos=821331 sysload=0.11 cputime=258.833 memavail=1627152 print_time=4864.468 buffer_time=2.607 print_stall=10 extruder: target=215 temp=214.9 pwm=0.526
Stats 4854.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3936674 bytes_read=1930450 bytes_retransmit=9 bytes_invalid=0 send_seq=107028 receive_seq=107028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=821397 sysload=0.11 cputime=258.885 memavail=1627144 print_time=4865.094 buffer_time=2.232 print_stall=10 extruder: target=215 temp=215.0 pwm=0.511
Stats 4855.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3937724 bytes_read=1930902 bytes_retransmit=9 bytes_invalid=0 send_seq=107055 receive_seq=107055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=821559 sysload=0.10 cputime=258.942 memavail=1627664 print_time=4866.320 buffer_time=2.458 print_stall=10 extruder: target=215 temp=214.9 pwm=0.585
Stats 4856.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3938389 bytes_read=1931318 bytes_retransmit=9 bytes_invalid=0 send_seq=107078 receive_seq=107078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=821653 sysload=0.10 cputime=258.991 memavail=1627396 print_time=4866.945 buffer_time=2.082 print_stall=10 extruder: target=215 temp=215.1 pwm=0.396
Stats 4857.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3939369 bytes_read=1931740 bytes_retransmit=9 bytes_invalid=0 send_seq=107105 receive_seq=107105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=821815 sysload=0.10 cputime=259.042 memavail=1627136 print_time=4868.214 buffer_time=2.349 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 4858.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3939927 bytes_read=1932162 bytes_retransmit=9 bytes_invalid=0 send_seq=107123 receive_seq=107123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=821881 sysload=0.10 cputime=259.076 memavail=1627152 print_time=4868.872 buffer_time=2.007 print_stall=10 extruder: target=215 temp=215.2 pwm=0.311
Stats 4859.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3940869 bytes_read=1932583 bytes_retransmit=9 bytes_invalid=0 send_seq=107147 receive_seq=107147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=822011 sysload=0.10 cputime=259.130 memavail=1627176 print_time=4870.200 buffer_time=2.335 print_stall=10 extruder: target=215 temp=215.1 pwm=0.460
Stats 4860.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3941731 bytes_read=1932986 bytes_retransmit=9 bytes_invalid=0 send_seq=107172 receive_seq=107168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=822139 sysload=0.09 cputime=259.181 memavail=1627504 print_time=4871.499 buffer_time=2.634 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 4861.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3942422 bytes_read=1933423 bytes_retransmit=9 bytes_invalid=0 send_seq=107192 receive_seq=107192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=822206 sysload=0.09 cputime=259.231 memavail=1627124 print_time=4872.110 buffer_time=2.243 print_stall=10 extruder: target=215 temp=215.1 pwm=0.426
Stats 4862.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3943500 bytes_read=1933859 bytes_retransmit=9 bytes_invalid=0 send_seq=107219 receive_seq=107219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=822336 sysload=0.09 cputime=259.286 memavail=1627224 print_time=4873.040 buffer_time=2.174 print_stall=10 extruder: target=215 temp=215.1 pwm=0.499
Stats 4863.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3944367 bytes_read=1934271 bytes_retransmit=9 bytes_invalid=0 send_seq=107241 receive_seq=107241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=57.5 mcu_temp: temp=41.6 sd_pos=822490 sysload=0.09 cputime=259.339 memavail=1627224 print_time=4874.201 buffer_time=2.334 print_stall=10 extruder: target=215 temp=215.0 pwm=0.499
Stats 4864.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3944979 bytes_read=1934688 bytes_retransmit=9 bytes_invalid=0 send_seq=107261 receive_seq=107261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=822549 sysload=0.09 cputime=259.393 memavail=1627552 print_time=4874.870 buffer_time=2.003 print_stall=10 extruder: target=215 temp=215.2 pwm=0.420
Stats 4865.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3945979 bytes_read=1935124 bytes_retransmit=9 bytes_invalid=0 send_seq=107288 receive_seq=107288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=822709 sysload=0.09 cputime=259.446 memavail=1627536 print_time=4876.374 buffer_time=2.506 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 4866.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3946582 bytes_read=1935516 bytes_retransmit=9 bytes_invalid=0 send_seq=107309 receive_seq=107309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=822773 sysload=0.09 cputime=259.492 memavail=1627276 print_time=4877.188 buffer_time=2.320 print_stall=10 extruder: target=215 temp=215.1 pwm=0.508
Stats 4867.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3947167 bytes_read=1935937 bytes_retransmit=9 bytes_invalid=0 send_seq=107327 receive_seq=107327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=822868 sysload=0.09 cputime=259.529 memavail=1627036 print_time=4878.045 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.2 pwm=0.434
Stats 4868.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3947727 bytes_read=1936334 bytes_retransmit=9 bytes_invalid=0 send_seq=107346 receive_seq=107346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=822932 sysload=0.09 cputime=259.563 memavail=1627668 print_time=4878.943 buffer_time=2.074 print_stall=10 extruder: target=215 temp=215.2 pwm=0.396
Stats 4869.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3948331 bytes_read=1936721 bytes_retransmit=9 bytes_invalid=0 send_seq=107366 receive_seq=107366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=822998 sysload=0.09 cputime=259.614 memavail=1627164 print_time=4879.870 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.1 pwm=0.444
Stats 4870.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3949264 bytes_read=1937172 bytes_retransmit=9 bytes_invalid=0 send_seq=107390 receive_seq=107390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=823190 sysload=0.08 cputime=259.667 memavail=1626860 print_time=4881.239 buffer_time=2.369 print_stall=10 extruder: target=215 temp=215.0 pwm=0.530
Stats 4871.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3950151 bytes_read=1937579 bytes_retransmit=9 bytes_invalid=0 send_seq=107414 receive_seq=107414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=823382 sysload=0.08 cputime=259.722 memavail=1627104 print_time=4881.902 buffer_time=2.031 print_stall=10 extruder: target=215 temp=215.0 pwm=0.492
Stats 4872.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3951612 bytes_read=1938031 bytes_retransmit=9 bytes_invalid=0 send_seq=107447 receive_seq=107447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=823697 sysload=0.08 cputime=259.778 memavail=1627136 print_time=4883.082 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.2 pwm=0.377
Stats 4873.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=3953138 bytes_read=1938547 bytes_retransmit=9 bytes_invalid=0 send_seq=107481 receive_seq=107481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.1 sd_pos=823984 sysload=0.08 cputime=259.837 memavail=1626880 print_time=4884.144 buffer_time=2.271 print_stall=10 extruder: target=215 temp=215.1 pwm=0.497
Stats 4874.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=3954363 bytes_read=1938984 bytes_retransmit=9 bytes_invalid=0 send_seq=107511 receive_seq=107511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=824207 sysload=0.08 cputime=259.890 memavail=1627236 print_time=4884.911 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.1 pwm=0.502
Stats 4875.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=3955846 bytes_read=1939431 bytes_retransmit=9 bytes_invalid=0 send_seq=107543 receive_seq=107543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.614 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=824557 sysload=0.15 cputime=259.943 memavail=1627236 print_time=4886.177 buffer_time=2.304 print_stall=10 extruder: target=215 temp=215.1 pwm=0.449
Stats 4876.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=3956759 bytes_read=1939877 bytes_retransmit=9 bytes_invalid=0 send_seq=107566 receive_seq=107566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=824717 sysload=0.15 cputime=259.985 memavail=1627244 print_time=4887.000 buffer_time=2.126 print_stall=10 extruder: target=215 temp=215.1 pwm=0.413
Stats 4877.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=3958324 bytes_read=1940344 bytes_retransmit=9 bytes_invalid=0 send_seq=107602 receive_seq=107602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.513 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=824945 sysload=0.15 cputime=260.039 memavail=1626928 print_time=4887.966 buffer_time=2.092 print_stall=10 extruder: target=215 temp=215.1 pwm=0.442
Stats 4878.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3960543 bytes_read=1940871 bytes_retransmit=9 bytes_invalid=0 send_seq=107647 receive_seq=107647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=826008 sysload=0.15 cputime=260.089 memavail=1626936 print_time=4889.153 buffer_time=2.278 print_stall=10 extruder: target=215 temp=215.1 pwm=0.489
Stats 4879.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3961861 bytes_read=1941367 bytes_retransmit=9 bytes_invalid=0 send_seq=107680 receive_seq=107680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=826682 sysload=0.15 cputime=260.149 memavail=1626652 print_time=4890.091 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.1 pwm=0.530
Stats 4880.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3963076 bytes_read=1941799 bytes_retransmit=9 bytes_invalid=0 send_seq=107709 receive_seq=107709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=827320 sysload=0.22 cputime=260.211 memavail=1626844 print_time=4890.902 buffer_time=2.026 print_stall=10 extruder: target=215 temp=215.3 pwm=0.348
Stats 4881.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3964734 bytes_read=1942271 bytes_retransmit=9 bytes_invalid=0 send_seq=107746 receive_seq=107746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=827854 sysload=0.22 cputime=260.275 memavail=1626596 print_time=4892.323 buffer_time=2.447 print_stall=10 extruder: target=215 temp=215.1 pwm=0.464
Stats 4882.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3965189 bytes_read=1942675 bytes_retransmit=9 bytes_invalid=0 send_seq=107762 receive_seq=107762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=57.9 mcu_temp: temp=41.8 sd_pos=828011 sysload=0.22 cputime=260.327 memavail=1626640 print_time=4892.995 buffer_time=2.117 print_stall=10 extruder: target=215 temp=215.2 pwm=0.378
Stats 4883.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3965700 bytes_read=1943051 bytes_retransmit=9 bytes_invalid=0 send_seq=107779 receive_seq=107779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=828230 sysload=0.22 cputime=260.379 memavail=1626704 print_time=4893.885 buffer_time=2.007 print_stall=10 extruder: target=215 temp=215.2 pwm=0.443
Stats 4884.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3966335 bytes_read=1943447 bytes_retransmit=9 bytes_invalid=0 send_seq=107800 receive_seq=107800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=828549 sysload=0.22 cputime=260.435 memavail=1626720 print_time=4895.345 buffer_time=2.467 print_stall=10 extruder: target=215 temp=215.2 pwm=0.462
Stats 4885.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3966800 bytes_read=1943826 bytes_retransmit=9 bytes_invalid=0 send_seq=107815 receive_seq=107815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.669 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=828714 sysload=0.28 cputime=260.485 memavail=1626712 print_time=4896.017 buffer_time=2.139 print_stall=10 extruder: target=215 temp=215.1 pwm=0.462
Stats 4886.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3967335 bytes_read=1944203 bytes_retransmit=9 bytes_invalid=0 send_seq=107833 receive_seq=107833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=828941 sysload=0.28 cputime=260.540 memavail=1626108 print_time=4896.907 buffer_time=2.028 print_stall=10 extruder: target=215 temp=215.0 pwm=0.541
Stats 4887.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3968141 bytes_read=1944620 bytes_retransmit=9 bytes_invalid=0 send_seq=107856 receive_seq=107856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=829324 sysload=0.28 cputime=260.596 memavail=1626628 print_time=4898.159 buffer_time=2.279 print_stall=10 extruder: target=215 temp=214.9 pwm=0.529
Stats 4888.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3968879 bytes_read=1945071 bytes_retransmit=9 bytes_invalid=0 send_seq=107880 receive_seq=107880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.284 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=829390 sysload=0.28 cputime=260.634 memavail=1627124 print_time=4900.393 buffer_time=3.513 print_stall=10 extruder: target=215 temp=214.9 pwm=0.572
Stats 4889.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3969086 bytes_read=1945423 bytes_retransmit=9 bytes_invalid=0 send_seq=107893 receive_seq=107893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.3 sd_pos=829390 sysload=0.28 cputime=260.675 memavail=1627216 print_time=4900.393 buffer_time=2.513 print_stall=10 extruder: target=215 temp=215.0 pwm=0.426
Stats 4890.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3969725 bytes_read=1945835 bytes_retransmit=9 bytes_invalid=0 send_seq=107915 receive_seq=107915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.481 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=829454 sysload=0.26 cputime=260.713 memavail=1627216 print_time=4902.662 buffer_time=3.781 print_stall=10 extruder: target=215 temp=214.8 pwm=0.584
Stats 4891.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3969967 bytes_read=1946231 bytes_retransmit=9 bytes_invalid=0 send_seq=107931 receive_seq=107931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=829454 sysload=0.26 cputime=260.761 memavail=1627468 print_time=4902.662 buffer_time=2.780 print_stall=10 extruder: target=215 temp=214.9 pwm=0.488
Stats 4892.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3970619 bytes_read=1946633 bytes_retransmit=9 bytes_invalid=0 send_seq=107954 receive_seq=107954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.537 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=829552 sysload=0.26 cputime=260.817 memavail=1627444 print_time=4904.991 buffer_time=4.108 print_stall=10 extruder: target=215 temp=215.0 pwm=0.412
Stats 4893.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3970832 bytes_read=1947020 bytes_retransmit=9 bytes_invalid=0 send_seq=107968 receive_seq=107968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=57.9 mcu_temp: temp=42.2 sd_pos=829552 sysload=0.26 cputime=260.864 memavail=1627728 print_time=4904.991 buffer_time=3.108 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 4894.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3971094 bytes_read=1947421 bytes_retransmit=9 bytes_invalid=0 send_seq=107985 receive_seq=107985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.018 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=829552 sysload=0.26 cputime=260.912 memavail=1627468 print_time=4904.991 buffer_time=2.108 print_stall=10 extruder: target=215 temp=214.8 pwm=0.550
Stats 4895.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3971713 bytes_read=1947808 bytes_retransmit=9 bytes_invalid=0 send_seq=108005 receive_seq=108005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=829615 sysload=0.24 cputime=260.962 memavail=1627224 print_time=4907.308 buffer_time=3.424 print_stall=10 extruder: target=215 temp=214.9 pwm=0.546
Stats 4896.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3971942 bytes_read=1948185 bytes_retransmit=9 bytes_invalid=0 send_seq=108020 receive_seq=108020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.496 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=829615 sysload=0.24 cputime=261.009 memavail=1627224 print_time=4907.308 buffer_time=2.423 print_stall=10 extruder: target=215 temp=214.9 pwm=0.554
Stats 4897.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3972565 bytes_read=1948601 bytes_retransmit=9 bytes_invalid=0 send_seq=108040 receive_seq=108040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=829681 sysload=0.24 cputime=261.060 memavail=1627468 print_time=4909.669 buffer_time=3.784 print_stall=10 extruder: target=215 temp=215.0 pwm=0.431
Stats 4898.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3972816 bytes_read=1948988 bytes_retransmit=9 bytes_invalid=0 send_seq=108057 receive_seq=108057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=829681 sysload=0.24 cputime=261.105 memavail=1627468 print_time=4909.669 buffer_time=2.783 print_stall=10 extruder: target=215 temp=215.1 pwm=0.430
Stats 4899.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3973444 bytes_read=1949395 bytes_retransmit=9 bytes_invalid=0 send_seq=108078 receive_seq=108078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.0 sd_pos=829745 sysload=0.24 cputime=261.159 memavail=1627476 print_time=4912.055 buffer_time=4.168 print_stall=10 extruder: target=215 temp=214.9 pwm=0.521
Stats 4900.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3973670 bytes_read=1949786 bytes_retransmit=9 bytes_invalid=0 send_seq=108093 receive_seq=108093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=829745 sysload=0.22 cputime=261.205 memavail=1627468 print_time=4912.055 buffer_time=3.168 print_stall=10 extruder: target=215 temp=215.0 pwm=0.446
Stats 4901.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3973887 bytes_read=1950148 bytes_retransmit=9 bytes_invalid=0 send_seq=108108 receive_seq=108108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.053 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=829745 sysload=0.22 cputime=261.254 memavail=1627088 print_time=4912.055 buffer_time=2.167 print_stall=10 extruder: target=215 temp=214.9 pwm=0.544
Stats 4902.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3974510 bytes_read=1950537 bytes_retransmit=9 bytes_invalid=0 send_seq=108129 receive_seq=108129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.530 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=829843 sysload=0.22 cputime=261.306 memavail=1626816 print_time=4914.465 buffer_time=3.577 print_stall=10 extruder: target=215 temp=214.9 pwm=0.555
Stats 4903.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3974741 bytes_read=1950943 bytes_retransmit=9 bytes_invalid=0 send_seq=108144 receive_seq=108144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.8 pwm=0.581 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=829843 sysload=0.22 cputime=261.354 memavail=1626512 print_time=4914.465 buffer_time=2.577 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 4904.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3975326 bytes_read=1951302 bytes_retransmit=9 bytes_invalid=0 send_seq=108162 receive_seq=108162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.348 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=829905 sysload=0.22 cputime=261.407 memavail=1626764 print_time=4916.900 buffer_time=4.011 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 4905.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3975523 bytes_read=1951669 bytes_retransmit=9 bytes_invalid=0 send_seq=108175 receive_seq=108175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.358 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=829905 sysload=0.20 cputime=261.452 memavail=1626740 print_time=4916.900 buffer_time=3.010 print_stall=10 extruder: target=215 temp=215.1 pwm=0.424
Stats 4906.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3975751 bytes_read=1952037 bytes_retransmit=9 bytes_invalid=0 send_seq=108190 receive_seq=108189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.290 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=829905 sysload=0.20 cputime=261.499 memavail=1626436 print_time=4916.900 buffer_time=2.010 print_stall=10 extruder: target=215 temp=215.1 pwm=0.333
Stats 4907.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3976355 bytes_read=1952439 bytes_retransmit=9 bytes_invalid=0 send_seq=108209 receive_seq=108209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=9 freq=71996361 heater_bed: target=55 temp=54.8 pwm=0.521 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=829999 sysload=0.20 cputime=261.551 memavail=1627296 print_time=4919.385 buffer_time=3.494 print_stall=10 extruder: target=215 temp=215.0 pwm=0.428
Stats 4908.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3976554 bytes_read=1952788 bytes_retransmit=9 bytes_invalid=0 send_seq=108223 receive_seq=108222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.120 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=829999 sysload=0.20 cputime=261.580 memavail=1627332 print_time=4919.385 buffer_time=2.494 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 4909.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3977057 bytes_read=1953209 bytes_retransmit=9 bytes_invalid=0 send_seq=108243 receive_seq=108243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.408 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=830096 sysload=0.20 cputime=261.629 memavail=1627016 print_time=4919.926 buffer_time=2.035 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 4910.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3977826 bytes_read=1953606 bytes_retransmit=9 bytes_invalid=0 send_seq=108265 receive_seq=108265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.260 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=830260 sysload=0.18 cputime=261.678 memavail=1627328 print_time=4920.970 buffer_time=2.079 print_stall=10 extruder: target=215 temp=214.9 pwm=0.604
Stats 4911.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3978780 bytes_read=1954038 bytes_retransmit=9 bytes_invalid=0 send_seq=108291 receive_seq=108291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.155 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=830390 sysload=0.18 cputime=261.737 memavail=1627068 print_time=4924.011 buffer_time=4.118 print_stall=10 extruder: target=215 temp=215.1 pwm=0.450
Stats 4912.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3979031 bytes_read=1954429 bytes_retransmit=9 bytes_invalid=0 send_seq=108306 receive_seq=108306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.389 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=830390 sysload=0.18 cputime=261.786 memavail=1627092 print_time=4924.011 buffer_time=3.117 print_stall=10 extruder: target=215 temp=215.1 pwm=0.469
Stats 4913.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3979269 bytes_read=1954806 bytes_retransmit=9 bytes_invalid=0 send_seq=108321 receive_seq=108321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.159 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=830390 sysload=0.18 cputime=261.835 memavail=1626984 print_time=4924.011 buffer_time=2.116 print_stall=10 extruder: target=215 temp=215.1 pwm=0.391
Stats 4914.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3979867 bytes_read=1955213 bytes_retransmit=9 bytes_invalid=0 send_seq=108342 receive_seq=108342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.381 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=830454 sysload=0.18 cputime=261.888 memavail=1627524 print_time=4925.983 buffer_time=3.085 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 4915.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3980105 bytes_read=1955604 bytes_retransmit=9 bytes_invalid=0 send_seq=108357 receive_seq=108357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=830454 sysload=0.17 cputime=261.937 memavail=1627852 print_time=4925.983 buffer_time=2.084 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 4916.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3980608 bytes_read=1955981 bytes_retransmit=9 bytes_invalid=0 send_seq=108375 receive_seq=108375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=830518 sysload=0.17 cputime=261.996 memavail=1627600 print_time=4927.926 buffer_time=3.026 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 4917.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3980809 bytes_read=1956363 bytes_retransmit=9 bytes_invalid=0 send_seq=108388 receive_seq=108388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.491 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=830518 sysload=0.17 cputime=262.046 memavail=1628336 print_time=4927.926 buffer_time=2.024 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 4918.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3981417 bytes_read=1956789 bytes_retransmit=9 bytes_invalid=0 send_seq=108410 receive_seq=108410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.010 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=830617 sysload=0.17 cputime=262.097 memavail=1628164 print_time=4929.851 buffer_time=2.945 print_stall=10 extruder: target=215 temp=215.0 pwm=0.482
Stats 4919.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3982175 bytes_read=1957191 bytes_retransmit=9 bytes_invalid=0 send_seq=108433 receive_seq=108433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=830722 sysload=0.17 cputime=262.156 memavail=1627860 print_time=4931.883 buffer_time=3.977 print_stall=10 extruder: target=215 temp=215.1 pwm=0.472
Stats 4920.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3982433 bytes_read=1957568 bytes_retransmit=9 bytes_invalid=0 send_seq=108448 receive_seq=108448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=830722 sysload=0.16 cputime=262.202 memavail=1627864 print_time=4931.883 buffer_time=2.976 print_stall=10 extruder: target=215 temp=215.1 pwm=0.455
Stats 4921.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3983138 bytes_read=1958010 bytes_retransmit=9 bytes_invalid=0 send_seq=108471 receive_seq=108471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.349 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=830787 sysload=0.16 cputime=262.254 memavail=1627856 print_time=4934.429 buffer_time=4.519 print_stall=10 extruder: target=215 temp=215.1 pwm=0.395
Stats 4922.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3983390 bytes_read=1958367 bytes_retransmit=9 bytes_invalid=0 send_seq=108485 receive_seq=108485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.445 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=830787 sysload=0.16 cputime=262.305 memavail=1627864 print_time=4934.429 buffer_time=3.518 print_stall=10 extruder: target=215 temp=215.1 pwm=0.471
Stats 4923.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3983633 bytes_read=1958779 bytes_retransmit=9 bytes_invalid=0 send_seq=108501 receive_seq=108501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.530 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=830787 sysload=0.16 cputime=262.352 memavail=1627616 print_time=4934.429 buffer_time=2.518 print_stall=10 extruder: target=215 temp=215.2 pwm=0.400
Stats 4924.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3984252 bytes_read=1959190 bytes_retransmit=9 bytes_invalid=0 send_seq=108523 receive_seq=108523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=830883 sysload=0.16 cputime=262.409 memavail=1627588 print_time=4936.985 buffer_time=4.072 print_stall=10 extruder: target=215 temp=215.1 pwm=0.459
Stats 4925.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3984502 bytes_read=1959547 bytes_retransmit=9 bytes_invalid=0 send_seq=108537 receive_seq=108537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=830883 sysload=0.14 cputime=262.456 memavail=1627616 print_time=4936.985 buffer_time=3.070 print_stall=10 extruder: target=215 temp=215.1 pwm=0.388
Stats 4926.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3984745 bytes_read=1959944 bytes_retransmit=9 bytes_invalid=0 send_seq=108553 receive_seq=108553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=830883 sysload=0.14 cputime=262.506 memavail=1627624 print_time=4936.985 buffer_time=2.069 print_stall=10 extruder: target=215 temp=215.2 pwm=0.333
Stats 4927.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3985404 bytes_read=1960350 bytes_retransmit=9 bytes_invalid=0 send_seq=108574 receive_seq=108574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=830949 sysload=0.14 cputime=262.556 memavail=1627108 print_time=4939.528 buffer_time=3.613 print_stall=10 extruder: target=215 temp=215.0 pwm=0.529
Stats 4928.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3985630 bytes_read=1960722 bytes_retransmit=9 bytes_invalid=0 send_seq=108588 receive_seq=108588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=57.9 mcu_temp: temp=42.2 sd_pos=830949 sysload=0.14 cputime=262.586 memavail=1626868 print_time=4939.528 buffer_time=2.610 print_stall=10 extruder: target=215 temp=215.0 pwm=0.539
Stats 4929.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3986257 bytes_read=1961149 bytes_retransmit=9 bytes_invalid=0 send_seq=108610 receive_seq=108610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=831013 sysload=0.14 cputime=262.639 memavail=1627180 print_time=4942.079 buffer_time=4.157 print_stall=10 extruder: target=215 temp=214.9 pwm=0.552
Stats 4930.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3986482 bytes_read=1961515 bytes_retransmit=9 bytes_invalid=0 send_seq=108623 receive_seq=108623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=831013 sysload=0.13 cputime=262.693 memavail=1627440 print_time=4942.079 buffer_time=3.157 print_stall=10 extruder: target=215 temp=215.1 pwm=0.424
Stats 4931.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3986665 bytes_read=1961862 bytes_retransmit=9 bytes_invalid=0 send_seq=108635 receive_seq=108635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.331 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=831013 sysload=0.13 cputime=262.739 memavail=1627692 print_time=4942.079 buffer_time=2.155 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 4932.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3987305 bytes_read=1962284 bytes_retransmit=9 bytes_invalid=0 send_seq=108656 receive_seq=108656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.342 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=831078 sysload=0.13 cputime=262.793 memavail=1627692 print_time=4944.629 buffer_time=3.703 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 4933.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3987551 bytes_read=1962680 bytes_retransmit=9 bytes_invalid=0 send_seq=108672 receive_seq=108672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.344 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=831078 sysload=0.13 cputime=262.843 memavail=1627684 print_time=4944.629 buffer_time=2.702 print_stall=10 extruder: target=215 temp=214.9 pwm=0.498
Stats 4934.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3988102 bytes_read=1963062 bytes_retransmit=9 bytes_invalid=0 send_seq=108691 receive_seq=108691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.372 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=831142 sysload=0.13 cputime=262.894 memavail=1627180 print_time=4946.255 buffer_time=3.326 print_stall=10 extruder: target=215 temp=214.9 pwm=0.559
Stats 4935.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3988387 bytes_read=1963464 bytes_retransmit=9 bytes_invalid=0 send_seq=108708 receive_seq=108708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=831142 sysload=0.12 cputime=262.945 memavail=1626944 print_time=4946.255 buffer_time=2.324 print_stall=10 extruder: target=215 temp=215.0 pwm=0.487
Stats 4936.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3988896 bytes_read=1963860 bytes_retransmit=9 bytes_invalid=0 send_seq=108727 receive_seq=108727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=831208 sysload=0.12 cputime=263.000 memavail=1626948 print_time=4947.858 buffer_time=2.927 print_stall=10 extruder: target=215 temp=214.9 pwm=0.487
Stats 4937.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3989687 bytes_read=1964277 bytes_retransmit=9 bytes_invalid=0 send_seq=108751 receive_seq=108750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=831272 sysload=0.12 cputime=263.057 memavail=1627148 print_time=4949.417 buffer_time=3.481 print_stall=10 extruder: target=215 temp=214.9 pwm=0.525
Stats 4938.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3989979 bytes_read=1964684 bytes_retransmit=9 bytes_invalid=0 send_seq=108768 receive_seq=108768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=831272 sysload=0.12 cputime=263.107 memavail=1627452 print_time=4949.417 buffer_time=2.481 print_stall=10 extruder: target=215 temp=214.9 pwm=0.533
Stats 4939.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3990436 bytes_read=1965065 bytes_retransmit=9 bytes_invalid=0 send_seq=108784 receive_seq=108784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=831337 sysload=0.12 cputime=263.162 memavail=1627460 print_time=4950.951 buffer_time=3.015 print_stall=10 extruder: target=215 temp=214.9 pwm=0.440
Stats 4940.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3990685 bytes_read=1965437 bytes_retransmit=9 bytes_invalid=0 send_seq=108801 receive_seq=108801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=831337 sysload=0.11 cputime=263.213 memavail=1627444 print_time=4950.951 buffer_time=2.015 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 4941.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3991239 bytes_read=1965854 bytes_retransmit=9 bytes_invalid=0 send_seq=108821 receive_seq=108821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=831401 sysload=0.11 cputime=263.264 memavail=1627164 print_time=4952.436 buffer_time=2.498 print_stall=10 extruder: target=215 temp=215.0 pwm=0.447
Stats 4942.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3991671 bytes_read=1966248 bytes_retransmit=9 bytes_invalid=0 send_seq=108839 receive_seq=108839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=831467 sysload=0.11 cputime=263.296 memavail=1627156 print_time=4953.891 buffer_time=2.952 print_stall=10 extruder: target=215 temp=214.9 pwm=0.503
Stats 4943.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000058 bytes_write=3992214 bytes_read=1966625 bytes_retransmit=9 bytes_invalid=0 send_seq=108859 receive_seq=108859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=831531 sysload=0.11 cputime=263.344 memavail=1627408 print_time=4955.297 buffer_time=3.355 print_stall=10 extruder: target=215 temp=214.9 pwm=0.539
Stats 4944.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000058 bytes_write=3992487 bytes_read=1967010 bytes_retransmit=9 bytes_invalid=0 send_seq=108875 receive_seq=108875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=831531 sysload=0.11 cputime=263.393 memavail=1627160 print_time=4955.297 buffer_time=2.353 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 4945.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000058 bytes_write=3992993 bytes_read=1967398 bytes_retransmit=9 bytes_invalid=0 send_seq=108894 receive_seq=108894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.441 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=831597 sysload=0.10 cputime=263.448 memavail=1627412 print_time=4956.674 buffer_time=2.727 print_stall=10 extruder: target=215 temp=215.1 pwm=0.393
Stats 4946.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000058 bytes_write=3993493 bytes_read=1967780 bytes_retransmit=9 bytes_invalid=0 send_seq=108913 receive_seq=108913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=831661 sysload=0.10 cputime=263.507 memavail=1627412 print_time=4958.000 buffer_time=3.052 print_stall=10 extruder: target=215 temp=214.9 pwm=0.461
Stats 4947.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000058 bytes_write=3993722 bytes_read=1968162 bytes_retransmit=9 bytes_invalid=0 send_seq=108926 receive_seq=108926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=831661 sysload=0.10 cputime=263.554 memavail=1627424 print_time=4958.000 buffer_time=2.051 print_stall=10 extruder: target=215 temp=214.9 pwm=0.461
Stats 4948.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3994247 bytes_read=1968578 bytes_retransmit=9 bytes_invalid=0 send_seq=108946 receive_seq=108946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=831757 sysload=0.10 cputime=263.586 memavail=1627424 print_time=4959.306 buffer_time=2.356 print_stall=10 extruder: target=215 temp=215.1 pwm=0.339
Stats 4949.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3994843 bytes_read=1968975 bytes_retransmit=9 bytes_invalid=0 send_seq=108968 receive_seq=108968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.8 pwm=0.703 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=831852 sysload=0.10 cputime=263.643 memavail=1627164 print_time=4960.563 buffer_time=2.612 print_stall=10 extruder: target=215 temp=214.9 pwm=0.537
Stats 4950.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3995404 bytes_read=1969397 bytes_retransmit=9 bytes_invalid=0 send_seq=108989 receive_seq=108989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=831917 sysload=0.09 cputime=263.698 memavail=1626936 print_time=4961.800 buffer_time=2.845 print_stall=10 extruder: target=215 temp=214.8 pwm=0.562
Stats 4951.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3995969 bytes_read=1969798 bytes_retransmit=9 bytes_invalid=0 send_seq=109009 receive_seq=109009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=832013 sysload=0.09 cputime=263.751 memavail=1626668 print_time=4963.092 buffer_time=3.137 print_stall=10 extruder: target=215 temp=214.9 pwm=0.519
Stats 4952.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3996216 bytes_read=1970155 bytes_retransmit=9 bytes_invalid=0 send_seq=109023 receive_seq=109023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=832013 sysload=0.09 cputime=263.798 memavail=1626900 print_time=4963.092 buffer_time=2.136 print_stall=10 extruder: target=215 temp=214.9 pwm=0.439
Stats 4953.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3996731 bytes_read=1970582 bytes_retransmit=9 bytes_invalid=0 send_seq=109042 receive_seq=109042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.429 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=832112 sysload=0.09 cputime=263.852 memavail=1626992 print_time=4964.374 buffer_time=2.415 print_stall=10 extruder: target=215 temp=215.1 pwm=0.355
Stats 4954.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3997306 bytes_read=1970988 bytes_retransmit=9 bytes_invalid=0 send_seq=109063 receive_seq=109063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=832238 sysload=0.09 cputime=263.909 memavail=1626992 print_time=4965.691 buffer_time=2.730 print_stall=10 extruder: target=215 temp=214.8 pwm=0.593
Stats 4955.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3997829 bytes_read=1971370 bytes_retransmit=9 bytes_invalid=0 send_seq=109083 receive_seq=109082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.609 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=832335 sysload=0.09 cputime=263.964 memavail=1627244 print_time=4967.011 buffer_time=3.049 print_stall=10 extruder: target=215 temp=215.0 pwm=0.544
Stats 4956.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3998054 bytes_read=1971762 bytes_retransmit=9 bytes_invalid=0 send_seq=109097 receive_seq=109097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.604 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=832335 sysload=0.09 cputime=264.011 memavail=1626992 print_time=4967.011 buffer_time=2.048 print_stall=10 extruder: target=215 temp=214.8 pwm=0.544
Stats 4957.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3998620 bytes_read=1972163 bytes_retransmit=9 bytes_invalid=0 send_seq=109117 receive_seq=109117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.481 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=832395 sysload=0.09 cputime=264.060 memavail=1626700 print_time=4968.337 buffer_time=2.374 print_stall=10 extruder: target=215 temp=215.1 pwm=0.420
Stats 4958.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3999137 bytes_read=1972560 bytes_retransmit=9 bytes_invalid=0 send_seq=109136 receive_seq=109136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.097 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=832461 sysload=0.09 cputime=264.090 memavail=1626996 print_time=4969.706 buffer_time=2.743 print_stall=10 extruder: target=215 temp=215.0 pwm=0.436
Stats 4959.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3999639 bytes_read=1972986 bytes_retransmit=9 bytes_invalid=0 send_seq=109155 receive_seq=109155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=11 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=832555 sysload=0.09 cputime=264.127 memavail=1627000 print_time=4971.107 buffer_time=3.139 print_stall=10 extruder: target=215 temp=214.9 pwm=0.559
Stats 4960.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3999871 bytes_read=1973333 bytes_retransmit=9 bytes_invalid=0 send_seq=109167 receive_seq=109167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=832555 sysload=0.08 cputime=264.173 memavail=1627236 print_time=4971.107 buffer_time=2.138 print_stall=10 extruder: target=215 temp=215.1 pwm=0.446
Stats 4961.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=4000375 bytes_read=1973715 bytes_retransmit=9 bytes_invalid=0 send_seq=109186 receive_seq=109186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=832621 sysload=0.08 cputime=264.228 memavail=1627480 print_time=4972.446 buffer_time=2.475 print_stall=10 extruder: target=215 temp=215.0 pwm=0.532
Stats 4962.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=4000905 bytes_read=1974166 bytes_retransmit=9 bytes_invalid=0 send_seq=109207 receive_seq=109207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.549 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=832685 sysload=0.08 cputime=264.282 memavail=1627504 print_time=4973.755 buffer_time=2.783 print_stall=10 extruder: target=215 temp=215.4 pwm=0.244
Stats 4963.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=4001389 bytes_read=1974553 bytes_retransmit=9 bytes_invalid=0 send_seq=109227 receive_seq=109227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.615 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=832750 sysload=0.08 cputime=264.333 memavail=1627504 print_time=4975.020 buffer_time=3.045 print_stall=10 extruder: target=215 temp=215.0 pwm=0.579
Stats 4964.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=4001655 bytes_read=1974915 bytes_retransmit=9 bytes_invalid=0 send_seq=109242 receive_seq=109242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.444 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=832750 sysload=0.08 cputime=264.383 memavail=1627508 print_time=4975.020 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.2 pwm=0.449
Stats 4965.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=4002205 bytes_read=1975346 bytes_retransmit=9 bytes_invalid=0 send_seq=109262 receive_seq=109262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=832782 sysload=0.07 cputime=264.433 memavail=1627768 print_time=4976.844 buffer_time=2.866 print_stall=10 extruder: target=215 temp=214.9 pwm=0.683
Stats 4966.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=4002469 bytes_read=1975703 bytes_retransmit=9 bytes_invalid=0 send_seq=109276 receive_seq=109276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=832814 sysload=0.07 cputime=264.485 memavail=1627768 print_time=4977.076 buffer_time=2.095 print_stall=10 extruder: target=215 temp=215.1 pwm=0.460
Stats 4967.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=4003253 bytes_read=1976135 bytes_retransmit=9 bytes_invalid=0 send_seq=109299 receive_seq=109299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=833005 sysload=0.07 cputime=264.541 memavail=1627740 print_time=4978.610 buffer_time=2.629 print_stall=10 extruder: target=215 temp=215.0 pwm=0.515
Stats 4968.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=4003814 bytes_read=1976551 bytes_retransmit=9 bytes_invalid=0 send_seq=109319 receive_seq=109319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=833101 sysload=0.07 cputime=264.573 memavail=1627764 print_time=4979.342 buffer_time=2.360 print_stall=10 extruder: target=215 temp=215.0 pwm=0.432
Stats 4969.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=4004567 bytes_read=1976948 bytes_retransmit=9 bytes_invalid=0 send_seq=109341 receive_seq=109341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.513 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=833260 sysload=0.07 cputime=264.630 memavail=1627520 print_time=4980.618 buffer_time=2.633 print_stall=10 extruder: target=215 temp=215.1 pwm=0.460
Stats 4970.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=4005067 bytes_read=1977345 bytes_retransmit=9 bytes_invalid=0 send_seq=109360 receive_seq=109360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=833353 sysload=0.07 cputime=264.685 memavail=1627500 print_time=4981.256 buffer_time=2.268 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 4971.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=4005787 bytes_read=1977771 bytes_retransmit=9 bytes_invalid=0 send_seq=109382 receive_seq=109382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=833513 sysload=0.07 cputime=264.726 memavail=1626564 print_time=4982.421 buffer_time=2.433 print_stall=10 extruder: target=215 temp=215.1 pwm=0.471
Stats 4972.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=4006299 bytes_read=1978153 bytes_retransmit=9 bytes_invalid=0 send_seq=109401 receive_seq=109401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=833608 sysload=0.07 cputime=264.776 memavail=1626572 print_time=4983.026 buffer_time=2.036 print_stall=10 extruder: target=215 temp=215.0 pwm=0.565
Stats 4973.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=4007073 bytes_read=1978585 bytes_retransmit=9 bytes_invalid=0 send_seq=109424 receive_seq=109424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=833762 sysload=0.07 cputime=264.832 memavail=1626556 print_time=4984.144 buffer_time=2.152 print_stall=10 extruder: target=215 temp=215.0 pwm=0.529
Stats 4974.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=4007814 bytes_read=1979011 bytes_retransmit=9 bytes_invalid=0 send_seq=109446 receive_seq=109446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.455 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=833918 sysload=0.07 cputime=264.887 memavail=1626572 print_time=4985.199 buffer_time=2.205 print_stall=10 extruder: target=215 temp=215.0 pwm=0.482
Stats 4975.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=4008620 bytes_read=1979403 bytes_retransmit=9 bytes_invalid=0 send_seq=109467 receive_seq=109467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.196 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=834077 sysload=0.06 cputime=264.944 memavail=1626540 print_time=4986.268 buffer_time=2.274 print_stall=10 extruder: target=215 temp=215.0 pwm=0.497
Stats 4976.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=4009603 bytes_read=1979835 bytes_retransmit=9 bytes_invalid=0 send_seq=109493 receive_seq=109493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=834301 sysload=0.06 cputime=264.999 memavail=1626576 print_time=4987.394 buffer_time=2.399 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 4977.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4011209 bytes_read=1980351 bytes_retransmit=9 bytes_invalid=0 send_seq=109530 receive_seq=109530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=835044 sysload=0.06 cputime=265.038 memavail=1626804 print_time=4988.723 buffer_time=2.727 print_stall=10 extruder: target=215 temp=215.2 pwm=0.334
Stats 4978.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4011718 bytes_read=1980728 bytes_retransmit=9 bytes_invalid=0 send_seq=109548 receive_seq=109548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=835108 sysload=0.06 cputime=265.073 memavail=1627088 print_time=4989.507 buffer_time=2.509 print_stall=10 extruder: target=215 temp=214.9 pwm=0.509
Stats 4979.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4012204 bytes_read=1981136 bytes_retransmit=9 bytes_invalid=0 send_seq=109567 receive_seq=109567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=835171 sysload=0.06 cputime=265.126 memavail=1627332 print_time=4990.343 buffer_time=2.344 print_stall=10 extruder: target=215 temp=215.4 pwm=0.311
Stats 4980.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4012752 bytes_read=1981542 bytes_retransmit=9 bytes_invalid=0 send_seq=109585 receive_seq=109585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=835266 sysload=0.06 cputime=265.174 memavail=1627600 print_time=4991.218 buffer_time=2.219 print_stall=10 extruder: target=215 temp=215.0 pwm=0.502
Stats 4981.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4013250 bytes_read=1981924 bytes_retransmit=9 bytes_invalid=0 send_seq=109604 receive_seq=109604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=835372 sysload=0.06 cputime=265.207 memavail=1628096 print_time=4992.143 buffer_time=2.141 print_stall=10 extruder: target=215 temp=215.2 pwm=0.363
Stats 4982.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4014236 bytes_read=1982351 bytes_retransmit=9 bytes_invalid=0 send_seq=109629 receive_seq=109629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.035 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=835437 sysload=0.06 cputime=265.258 memavail=1628096 print_time=4994.299 buffer_time=3.295 print_stall=10 extruder: target=215 temp=215.1 pwm=0.486
Stats 4983.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=4014462 bytes_read=1982757 bytes_retransmit=9 bytes_invalid=0 send_seq=109644 receive_seq=109644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=835437 sysload=0.06 cputime=265.308 memavail=1627812 print_time=4994.299 buffer_time=2.294 print_stall=10 extruder: target=215 temp=214.9 pwm=0.545
Stats 4984.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=4015036 bytes_read=1983144 bytes_retransmit=9 bytes_invalid=0 send_seq=109664 receive_seq=109664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=835499 sysload=0.06 cputime=265.363 memavail=1627844 print_time=4996.245 buffer_time=3.238 print_stall=10 extruder: target=215 temp=215.1 pwm=0.384
Stats 4985.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=4015250 bytes_read=1983531 bytes_retransmit=9 bytes_invalid=0 send_seq=109678 receive_seq=109678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.3 pwm=0.044 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=835499 sysload=0.05 cputime=265.412 memavail=1627596 print_time=4996.245 buffer_time=2.237 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 4986.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=4015828 bytes_read=1983937 bytes_retransmit=9 bytes_invalid=0 send_seq=109699 receive_seq=109699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.232 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=835565 sysload=0.05 cputime=265.466 memavail=1627768 print_time=4998.135 buffer_time=3.125 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 4987.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=4016042 bytes_read=1984309 bytes_retransmit=9 bytes_invalid=0 send_seq=109713 receive_seq=109713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.147 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=835565 sysload=0.05 cputime=265.514 memavail=1627392 print_time=4998.135 buffer_time=2.124 print_stall=10 extruder: target=215 temp=214.9 pwm=0.529
Stats 4988.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=4016611 bytes_read=1984726 bytes_retransmit=9 bytes_invalid=0 send_seq=109733 receive_seq=109733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.250 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=835628 sysload=0.05 cputime=265.564 memavail=1627428 print_time=4999.968 buffer_time=2.957 print_stall=10 extruder: target=215 temp=215.1 pwm=0.346
Stats 4989.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=4017202 bytes_read=1985127 bytes_retransmit=9 bytes_invalid=0 send_seq=109754 receive_seq=109753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.003 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=835691 sysload=0.05 cputime=265.597 memavail=1627420 print_time=5001.731 buffer_time=3.720 print_stall=10 extruder: target=215 temp=214.9 pwm=0.555
Stats 4990.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=4017421 bytes_read=1985489 bytes_retransmit=9 bytes_invalid=0 send_seq=109768 receive_seq=109768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.716 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=835691 sysload=0.05 cputime=265.642 memavail=1627416 print_time=5001.731 buffer_time=2.719 print_stall=10 extruder: target=215 temp=215.3 pwm=0.282
Stats 4991.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=4018014 bytes_read=1985901 bytes_retransmit=9 bytes_invalid=0 send_seq=109788 receive_seq=109787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.368 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=835754 sysload=0.05 cputime=265.677 memavail=1627160 print_time=5003.414 buffer_time=3.399 print_stall=10 extruder: target=215 temp=214.9 pwm=0.542
Stats 4992.2: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=4018204 bytes_read=1986267 bytes_retransmit=9 bytes_invalid=0 send_seq=109801 receive_seq=109800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=835754 sysload=0.05 cputime=265.722 memavail=1626920 print_time=5003.414 buffer_time=2.398 print_stall=10 extruder: target=215 temp=215.1 pwm=0.387
Stats 4993.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4018737 bytes_read=1986664 bytes_retransmit=9 bytes_invalid=0 send_seq=109820 receive_seq=109819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=835816 sysload=0.05 cputime=265.773 memavail=1626688 print_time=5005.017 buffer_time=2.998 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 4994.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4019222 bytes_read=1987066 bytes_retransmit=9 bytes_invalid=0 send_seq=109839 receive_seq=109836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.103 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=835911 sysload=0.05 cputime=265.820 memavail=1626648 print_time=5006.557 buffer_time=3.537 print_stall=10 extruder: target=215 temp=215.0 pwm=0.407
Stats 4995.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4019500 bytes_read=1987467 bytes_retransmit=9 bytes_invalid=0 send_seq=109856 receive_seq=109856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.457 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=835911 sysload=0.04 cputime=265.850 memavail=1626680 print_time=5006.557 buffer_time=2.536 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 4996.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4020013 bytes_read=1987854 bytes_retransmit=9 bytes_invalid=0 send_seq=109876 receive_seq=109876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.198 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=835975 sysload=0.04 cputime=265.883 memavail=1626932 print_time=5007.969 buffer_time=2.945 print_stall=10 extruder: target=215 temp=214.9 pwm=0.566
Stats 4997.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4020590 bytes_read=1988276 bytes_retransmit=9 bytes_invalid=0 send_seq=109895 receive_seq=109894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.413 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=836039 sysload=0.04 cputime=265.932 memavail=1627180 print_time=5009.284 buffer_time=3.260 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 4998.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4020798 bytes_read=1988652 bytes_retransmit=9 bytes_invalid=0 send_seq=109909 receive_seq=109909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.082 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=836039 sysload=0.04 cputime=265.965 memavail=1627444 print_time=5009.284 buffer_time=2.256 print_stall=10 extruder: target=215 temp=214.9 pwm=0.529
Stats 4999.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4021336 bytes_read=1989034 bytes_retransmit=9 bytes_invalid=0 send_seq=109928 receive_seq=109928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.568 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=836130 sysload=0.04 cputime=266.019 memavail=1627452 print_time=5010.521 buffer_time=2.492 print_stall=10 extruder: target=215 temp=215.1 pwm=0.413
Stats 5000.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4021835 bytes_read=1989446 bytes_retransmit=9 bytes_invalid=0 send_seq=109947 receive_seq=109947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.262 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=836226 sysload=0.04 cputime=266.072 memavail=1627724 print_time=5011.571 buffer_time=2.541 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
Stats 5001.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4022370 bytes_read=1989841 bytes_retransmit=9 bytes_invalid=0 send_seq=109968 receive_seq=109967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=836291 sysload=0.04 cputime=266.121 memavail=1627188 print_time=5012.489 buffer_time=2.457 print_stall=10 extruder: target=215 temp=215.2 pwm=0.341
Stats 5002.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=4023818 bytes_read=1990317 bytes_retransmit=9 bytes_invalid=0 send_seq=110004 receive_seq=110004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=836859 sysload=0.04 cputime=266.180 memavail=1627204 print_time=5013.636 buffer_time=2.603 print_stall=10 extruder: target=215 temp=215.1 pwm=0.394
Stats 5003.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=4025163 bytes_read=1990777 bytes_retransmit=9 bytes_invalid=0 send_seq=110035 receive_seq=110035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=837112 sysload=0.04 cputime=266.232 memavail=1626976 print_time=5014.302 buffer_time=2.268 print_stall=10 extruder: target=215 temp=215.1 pwm=0.454
Stats 5004.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=4026568 bytes_read=1991222 bytes_retransmit=9 bytes_invalid=0 send_seq=110066 receive_seq=110066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=837527 sysload=0.04 cputime=266.290 memavail=1627188 print_time=5015.359 buffer_time=2.323 print_stall=10 extruder: target=215 temp=215.0 pwm=0.541
Stats 5005.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=4028216 bytes_read=1991695 bytes_retransmit=9 bytes_invalid=0 send_seq=110104 receive_seq=110104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=838138 sysload=0.04 cputime=266.352 memavail=1627160 print_time=5016.186 buffer_time=2.150 print_stall=10 extruder: target=215 temp=215.0 pwm=0.488
Stats 5006.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=4029439 bytes_read=1992162 bytes_retransmit=9 bytes_invalid=0 send_seq=110135 receive_seq=110134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=839172 sysload=0.04 cputime=266.416 memavail=1627440 print_time=5017.405 buffer_time=2.365 print_stall=10 extruder: target=215 temp=215.1 pwm=0.379
Stats 5007.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=4030020 bytes_read=1992583 bytes_retransmit=9 bytes_invalid=0 send_seq=110155 receive_seq=110155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=839238 sysload=0.04 cputime=266.466 memavail=1626860 print_time=5018.164 buffer_time=2.125 print_stall=10 extruder: target=215 temp=214.9 pwm=0.513
Stats 5008.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=4030633 bytes_read=1992975 bytes_retransmit=9 bytes_invalid=0 send_seq=110176 receive_seq=110176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.1 sd_pos=839302 sysload=0.04 cputime=266.501 memavail=1626912 print_time=5020.358 buffer_time=3.318 print_stall=10 extruder: target=215 temp=215.1 pwm=0.392
Stats 5009.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=4030854 bytes_read=1993367 bytes_retransmit=9 bytes_invalid=0 send_seq=110191 receive_seq=110191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.018 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=839302 sysload=0.04 cputime=266.546 memavail=1627148 print_time=5020.358 buffer_time=2.317 print_stall=10 extruder: target=215 temp=215.0 pwm=0.431
Stats 5010.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=4031403 bytes_read=1993768 bytes_retransmit=9 bytes_invalid=0 send_seq=110211 receive_seq=110211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.007 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=839363 sysload=0.03 cputime=266.597 memavail=1626668 print_time=5021.682 buffer_time=2.640 print_stall=10 extruder: target=215 temp=215.1 pwm=0.453
Stats 5011.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=4031854 bytes_read=1994140 bytes_retransmit=9 bytes_invalid=0 send_seq=110228 receive_seq=110228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=839458 sysload=0.03 cputime=266.647 memavail=1626808 print_time=5022.969 buffer_time=2.925 print_stall=10 extruder: target=215 temp=215.1 pwm=0.382
Stats 5012.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=4032415 bytes_read=1994567 bytes_retransmit=9 bytes_invalid=0 send_seq=110247 receive_seq=110247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.476 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=839491 sysload=0.03 cputime=266.695 memavail=1626868 print_time=5024.785 buffer_time=3.740 print_stall=10 extruder: target=215 temp=215.0 pwm=0.468
Stats 5013.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=4032620 bytes_read=1994928 bytes_retransmit=9 bytes_invalid=0 send_seq=110259 receive_seq=110259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=839491 sysload=0.03 cputime=266.726 memavail=1626792 print_time=5024.785 buffer_time=2.739 print_stall=10 extruder: target=215 temp=215.0 pwm=0.468
Stats 5014.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=4033186 bytes_read=1995310 bytes_retransmit=9 bytes_invalid=0 send_seq=110278 receive_seq=110278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=839588 sysload=0.03 cputime=266.778 memavail=1627128 print_time=5027.035 buffer_time=3.988 print_stall=10 extruder: target=215 temp=214.9 pwm=0.459
Stats 5015.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=4033420 bytes_read=1995692 bytes_retransmit=9 bytes_invalid=0 send_seq=110291 receive_seq=110291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=839588 sysload=0.03 cputime=266.825 memavail=1626904 print_time=5027.035 buffer_time=2.987 print_stall=10 extruder: target=215 temp=215.0 pwm=0.459
Stats 5016.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=4033992 bytes_read=1996078 bytes_retransmit=9 bytes_invalid=0 send_seq=110309 receive_seq=110308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=839653 sysload=0.03 cputime=266.874 memavail=1626660 print_time=5028.987 buffer_time=3.938 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 5017.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=4034174 bytes_read=1996450 bytes_retransmit=9 bytes_invalid=0 send_seq=110322 receive_seq=110322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=839653 sysload=0.03 cputime=266.920 memavail=1627120 print_time=5028.987 buffer_time=2.938 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 5018.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=4034730 bytes_read=1996852 bytes_retransmit=9 bytes_invalid=0 send_seq=110340 receive_seq=110339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=839712 sysload=0.03 cputime=266.956 memavail=1627216 print_time=5030.883 buffer_time=3.832 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 5019.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=4034915 bytes_read=1997223 bytes_retransmit=9 bytes_invalid=0 send_seq=110353 receive_seq=110353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=839712 sysload=0.03 cputime=266.998 memavail=1623940 print_time=5030.883 buffer_time=2.832 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 5020.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=4035393 bytes_read=1997595 bytes_retransmit=9 bytes_invalid=0 send_seq=110370 receive_seq=110370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=839806 sysload=0.03 cputime=267.032 memavail=1616640 print_time=5032.733 buffer_time=3.681 print_stall=10 extruder: target=215 temp=214.9 pwm=0.483
Stats 5021.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=4035663 bytes_read=1997987 bytes_retransmit=9 bytes_invalid=0 send_seq=110385 receive_seq=110385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.035 rpi: temp=57.9 mcu_temp: temp=41.4 sd_pos=839806 sysload=0.03 cputime=267.066 memavail=1621620 print_time=5032.733 buffer_time=2.680 print_stall=10 extruder: target=215 temp=214.9 pwm=0.481
Stats 5022.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=4036118 bytes_read=1998378 bytes_retransmit=9 bytes_invalid=0 send_seq=110400 receive_seq=110400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=839872 sysload=0.03 cputime=267.101 memavail=1626408 print_time=5034.495 buffer_time=3.442 print_stall=10 extruder: target=215 temp=214.9 pwm=0.481
Stats 5023.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=4036369 bytes_read=1998730 bytes_retransmit=9 bytes_invalid=0 send_seq=110414 receive_seq=110413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=839872 sysload=0.03 cputime=267.132 memavail=1626456 print_time=5034.495 buffer_time=2.441 print_stall=10 extruder: target=215 temp=215.0 pwm=0.381
Stats 5024.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=4036922 bytes_read=1999152 bytes_retransmit=9 bytes_invalid=0 send_seq=110434 receive_seq=110434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=57.9 mcu_temp: temp=41.9 sd_pos=839938 sysload=0.03 cputime=267.171 memavail=1626600 print_time=5036.187 buffer_time=3.129 print_stall=10 extruder: target=215 temp=214.8 pwm=0.545
Stats 5025.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=4037097 bytes_read=1999508 bytes_retransmit=9 bytes_invalid=0 send_seq=110445 receive_seq=110445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=839938 sysload=0.02 cputime=267.219 memavail=1626908 print_time=5036.187 buffer_time=2.127 print_stall=10 extruder: target=215 temp=215.1 pwm=0.371
Stats 5026.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=4037606 bytes_read=1999880 bytes_retransmit=9 bytes_invalid=0 send_seq=110462 receive_seq=110462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=840003 sysload=0.02 cputime=267.272 memavail=1626948 print_time=5037.800 buffer_time=2.739 print_stall=10 extruder: target=215 temp=215.0 pwm=0.425
Stats 5027.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4038151 bytes_read=2000302 bytes_retransmit=9 bytes_invalid=0 send_seq=110481 receive_seq=110480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=840100 sysload=0.02 cputime=267.324 memavail=1627440 print_time=5039.355 buffer_time=3.293 print_stall=10 extruder: target=215 temp=215.0 pwm=0.422
Stats 5028.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4038319 bytes_read=2000668 bytes_retransmit=9 bytes_invalid=0 send_seq=110493 receive_seq=110493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.205 rpi: temp=58.4 mcu_temp: temp=41.7 sd_pos=840100 sysload=0.02 cputime=267.369 memavail=1627692 print_time=5039.355 buffer_time=2.291 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 5029.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4038832 bytes_read=2001050 bytes_retransmit=9 bytes_invalid=0 send_seq=110512 receive_seq=110512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=840165 sysload=0.02 cputime=267.419 memavail=1627440 print_time=5040.773 buffer_time=2.707 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 5030.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4039305 bytes_read=2001456 bytes_retransmit=9 bytes_invalid=0 send_seq=110528 receive_seq=110527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.642 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=840231 sysload=0.02 cputime=267.471 memavail=1627420 print_time=5042.103 buffer_time=3.034 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 5031.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=4039488 bytes_read=2001813 bytes_retransmit=9 bytes_invalid=0 send_seq=110541 receive_seq=110541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=840231 sysload=0.02 cputime=267.522 memavail=1627436 print_time=5042.103 buffer_time=2.033 print_stall=10 extruder: target=215 temp=214.9 pwm=0.515
Stats 5032.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4040057 bytes_read=2002215 bytes_retransmit=9 bytes_invalid=0 send_seq=110561 receive_seq=110561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=840328 sysload=0.02 cputime=267.573 memavail=1627436 print_time=5043.362 buffer_time=2.291 print_stall=10 extruder: target=215 temp=215.0 pwm=0.379
Stats 5033.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4040534 bytes_read=2002636 bytes_retransmit=9 bytes_invalid=0 send_seq=110579 receive_seq=110579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=840427 sysload=0.02 cputime=267.621 memavail=1627412 print_time=5044.433 buffer_time=2.361 print_stall=10 extruder: target=215 temp=214.9 pwm=0.508
Stats 5034.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4041007 bytes_read=2003013 bytes_retransmit=9 bytes_invalid=0 send_seq=110597 receive_seq=110597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=840494 sysload=0.02 cputime=267.670 memavail=1627152 print_time=5045.362 buffer_time=2.289 print_stall=10 extruder: target=215 temp=215.0 pwm=0.437
Stats 5035.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4041852 bytes_read=2003430 bytes_retransmit=9 bytes_invalid=0 send_seq=110623 receive_seq=110623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.570 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=840603 sysload=0.02 cputime=267.720 memavail=1627140 print_time=5046.233 buffer_time=2.158 print_stall=10 extruder: target=215 temp=215.0 pwm=0.493
Stats 5036.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=4043620 bytes_read=2003961 bytes_retransmit=9 bytes_invalid=0 send_seq=110663 receive_seq=110663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.487 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=842159 sysload=0.02 cputime=267.794 memavail=1627100 print_time=5047.390 buffer_time=2.312 print_stall=10 extruder: target=215 temp=215.0 pwm=0.430
Stats 5037.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=4044900 bytes_read=2004413 bytes_retransmit=9 bytes_invalid=0 send_seq=110694 receive_seq=110693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.694 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=842588 sysload=0.02 cputime=267.852 memavail=1627672 print_time=5048.128 buffer_time=2.049 print_stall=10 extruder: target=215 temp=215.1 pwm=0.409
Stats 5038.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=4046295 bytes_read=2004891 bytes_retransmit=9 bytes_invalid=0 send_seq=110726 receive_seq=110726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.178 rpi: temp=57.5 mcu_temp: temp=41.8 sd_pos=843458 sysload=0.02 cputime=267.890 memavail=1627748 print_time=5049.246 buffer_time=2.166 print_stall=10 extruder: target=215 temp=215.0 pwm=0.409
Stats 5039.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=4047929 bytes_read=2005387 bytes_retransmit=9 bytes_invalid=0 send_seq=110763 receive_seq=110762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=844149 sysload=0.02 cputime=267.932 memavail=1627496 print_time=5050.302 buffer_time=2.221 print_stall=10 extruder: target=215 temp=214.9 pwm=0.565
Stats 5040.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=4049282 bytes_read=2005834 bytes_retransmit=9 bytes_invalid=0 send_seq=110795 receive_seq=110794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=844812 sysload=0.02 cputime=268.000 memavail=1627492 print_time=5051.237 buffer_time=2.155 print_stall=10 extruder: target=215 temp=215.1 pwm=0.470
Stats 5041.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=4051015 bytes_read=2006326 bytes_retransmit=9 bytes_invalid=0 send_seq=110833 receive_seq=110832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=845453 sysload=0.02 cputime=268.064 memavail=1627752 print_time=5052.105 buffer_time=2.021 print_stall=10 extruder: target=215 temp=214.8 pwm=0.554
Stats 5042.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4052635 bytes_read=2006837 bytes_retransmit=9 bytes_invalid=0 send_seq=110868 receive_seq=110868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=846427 sysload=0.02 cputime=268.133 memavail=1628260 print_time=5053.474 buffer_time=2.389 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 5043.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4053738 bytes_read=2007259 bytes_retransmit=9 bytes_invalid=0 send_seq=110895 receive_seq=110895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=847217 sysload=0.02 cputime=268.196 memavail=1628236 print_time=5054.347 buffer_time=2.262 print_stall=10 extruder: target=215 temp=215.0 pwm=0.403
Stats 5044.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4054809 bytes_read=2007691 bytes_retransmit=9 bytes_invalid=0 send_seq=110922 receive_seq=110921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=847808 sysload=0.02 cputime=268.257 memavail=1628100 print_time=5055.364 buffer_time=2.276 print_stall=10 extruder: target=215 temp=215.0 pwm=0.464
Stats 5045.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4056063 bytes_read=2008167 bytes_retransmit=9 bytes_invalid=0 send_seq=110953 receive_seq=110953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=848167 sysload=0.02 cputime=268.316 memavail=1628296 print_time=5056.112 buffer_time=2.025 print_stall=10 extruder: target=215 temp=214.9 pwm=0.464
Stats 5046.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4056966 bytes_read=2008569 bytes_retransmit=9 bytes_invalid=0 send_seq=110976 receive_seq=110976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=848822 sysload=0.02 cputime=268.376 memavail=1627796 print_time=5057.216 buffer_time=2.128 print_stall=10 extruder: target=215 temp=214.9 pwm=0.464
Stats 5047.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4057817 bytes_read=2008996 bytes_retransmit=9 bytes_invalid=0 send_seq=110998 receive_seq=110998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=849505 sysload=0.02 cputime=268.440 memavail=1627564 print_time=5058.096 buffer_time=2.005 print_stall=10 extruder: target=215 temp=214.9 pwm=0.429
Stats 5048.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4058591 bytes_read=2009422 bytes_retransmit=9 bytes_invalid=0 send_seq=111020 receive_seq=111020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.068 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=850154 sysload=0.02 cputime=268.503 memavail=1627224 print_time=5059.223 buffer_time=2.129 print_stall=10 extruder: target=215 temp=214.8 pwm=0.513
Stats 5049.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4059817 bytes_read=2009844 bytes_retransmit=9 bytes_invalid=0 send_seq=111047 receive_seq=111047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=850976 sysload=0.02 cputime=268.571 memavail=1627256 print_time=5060.413 buffer_time=2.320 print_stall=10 extruder: target=215 temp=214.8 pwm=0.496
Stats 5050.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4060486 bytes_read=2010251 bytes_retransmit=9 bytes_invalid=0 send_seq=111068 receive_seq=111068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=851597 sysload=0.02 cputime=268.611 memavail=1627256 print_time=5061.281 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.9 pwm=0.473
Stats 5051.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4061263 bytes_read=2010677 bytes_retransmit=9 bytes_invalid=0 send_seq=111090 receive_seq=111090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=852119 sysload=0.02 cputime=268.673 memavail=1627248 print_time=5062.148 buffer_time=2.052 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 5052.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000064 bytes_write=4062255 bytes_read=2011104 bytes_retransmit=9 bytes_invalid=0 send_seq=111115 receive_seq=111115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=852610 sysload=0.02 cputime=268.735 memavail=1627260 print_time=5064.220 buffer_time=3.123 print_stall=10 extruder: target=215 temp=214.8 pwm=0.585
Stats 5053.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000064 bytes_write=4062482 bytes_read=2011481 bytes_retransmit=9 bytes_invalid=0 send_seq=111130 receive_seq=111130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.060 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=852610 sysload=0.02 cputime=268.783 memavail=1627260 print_time=5064.220 buffer_time=2.123 print_stall=10 extruder: target=215 temp=214.8 pwm=0.572
Stats 5054.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000064 bytes_write=4063427 bytes_read=2011932 bytes_retransmit=9 bytes_invalid=0 send_seq=111157 receive_seq=111157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.8 pwm=0.527 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=853301 sysload=0.02 cputime=268.850 memavail=1627340 print_time=5066.825 buffer_time=3.727 print_stall=10 extruder: target=215 temp=214.7 pwm=0.594
Stats 5055.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000064 bytes_write=4063702 bytes_read=2012299 bytes_retransmit=9 bytes_invalid=0 send_seq=111173 receive_seq=111173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.292 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=853301 sysload=0.01 cputime=268.900 memavail=1626744 print_time=5066.825 buffer_time=2.726 print_stall=10 extruder: target=215 temp=214.8 pwm=0.515
Stats 5056.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000064 bytes_write=4064513 bytes_read=2012711 bytes_retransmit=9 bytes_invalid=0 send_seq=111196 receive_seq=111195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.313 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=853556 sysload=0.01 cputime=268.957 memavail=1626776 print_time=5067.648 buffer_time=2.547 print_stall=10 extruder: target=215 temp=214.7 pwm=0.595
Stats 5057.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=4065095 bytes_read=2013147 bytes_retransmit=9 bytes_invalid=0 send_seq=111216 receive_seq=111216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=853906 sysload=0.01 cputime=269.015 memavail=1626008 print_time=5068.246 buffer_time=2.145 print_stall=10 extruder: target=215 temp=214.9 pwm=0.482
Stats 5058.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=4065991 bytes_read=2013549 bytes_retransmit=9 bytes_invalid=0 send_seq=111239 receive_seq=111239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.533 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=854665 sysload=0.01 cputime=269.076 memavail=1626224 print_time=5069.173 buffer_time=2.071 print_stall=10 extruder: target=215 temp=214.9 pwm=0.482
Stats 5059.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=4066863 bytes_read=2013971 bytes_retransmit=9 bytes_invalid=0 send_seq=111264 receive_seq=111263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=855105 sysload=0.01 cputime=269.139 memavail=1626476 print_time=5070.384 buffer_time=2.278 print_stall=10 extruder: target=215 temp=215.1 pwm=0.388
Stats 5060.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=4067678 bytes_read=2014402 bytes_retransmit=9 bytes_invalid=0 send_seq=111286 receive_seq=111286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.524 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=855609 sysload=0.01 cputime=269.198 memavail=1626428 print_time=5071.150 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.0 pwm=0.450
Stats 5061.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=4068652 bytes_read=2014799 bytes_retransmit=9 bytes_invalid=0 send_seq=111310 receive_seq=111310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.358 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=856306 sysload=0.01 cputime=269.240 memavail=1625900 print_time=5072.321 buffer_time=2.214 print_stall=10 extruder: target=215 temp=215.1 pwm=0.381
Stats 5062.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4069714 bytes_read=2015254 bytes_retransmit=9 bytes_invalid=0 send_seq=111338 receive_seq=111337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.071 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=856803 sysload=0.01 cputime=269.305 memavail=1626156 print_time=5073.302 buffer_time=2.193 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 5063.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4070240 bytes_read=2015639 bytes_retransmit=9 bytes_invalid=0 send_seq=111356 receive_seq=111356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=857016 sysload=0.01 cputime=269.364 memavail=1626392 print_time=5074.136 buffer_time=2.026 print_stall=10 extruder: target=215 temp=215.2 pwm=0.367
Stats 5064.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4070856 bytes_read=2016002 bytes_retransmit=9 bytes_invalid=0 send_seq=111374 receive_seq=111373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=857226 sysload=0.01 cputime=269.426 memavail=1626416 print_time=5075.137 buffer_time=2.026 print_stall=10 extruder: target=215 temp=215.0 pwm=0.538
Stats 5065.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4071403 bytes_read=2016409 bytes_retransmit=9 bytes_invalid=0 send_seq=111391 receive_seq=111391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=857478 sysload=0.01 cputime=269.488 memavail=1626420 print_time=5076.305 buffer_time=2.192 print_stall=10 extruder: target=215 temp=214.9 pwm=0.580
Stats 5066.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4072012 bytes_read=2016810 bytes_retransmit=9 bytes_invalid=0 send_seq=111411 receive_seq=111411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=857699 sysload=0.01 cputime=269.547 memavail=1626392 print_time=5077.140 buffer_time=2.023 print_stall=10 extruder: target=215 temp=215.2 pwm=0.345
Stats 5067.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=4072619 bytes_read=2017217 bytes_retransmit=9 bytes_invalid=0 send_seq=111432 receive_seq=111432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.049 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=857914 sysload=0.01 cputime=269.603 memavail=1626144 print_time=5078.141 buffer_time=2.024 print_stall=10 extruder: target=215 temp=214.9 pwm=0.543
Stats 5068.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=4073950 bytes_read=2017684 bytes_retransmit=9 bytes_invalid=0 send_seq=111463 receive_seq=111462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.470 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=858721 sysload=0.01 cputime=269.648 memavail=1626160 print_time=5079.839 buffer_time=2.722 print_stall=10 extruder: target=215 temp=215.1 pwm=0.399
Stats 5069.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=4074902 bytes_read=2018120 bytes_retransmit=9 bytes_invalid=0 send_seq=111489 receive_seq=111489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=859071 sysload=0.01 cputime=269.704 memavail=1626396 print_time=5080.323 buffer_time=2.205 print_stall=10 extruder: target=215 temp=215.0 pwm=0.442
Stats 5070.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=4075827 bytes_read=2018532 bytes_retransmit=9 bytes_invalid=0 send_seq=111514 receive_seq=111514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=860784 sysload=0.01 cputime=269.777 memavail=1626708 print_time=5081.131 buffer_time=2.009 print_stall=10 extruder: target=215 temp=215.1 pwm=0.410
Stats 5071.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=4077175 bytes_read=2018999 bytes_retransmit=9 bytes_invalid=0 send_seq=111544 receive_seq=111544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.448 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=863040 sysload=0.01 cputime=269.867 memavail=1626140 print_time=5082.142 buffer_time=2.018 print_stall=10 extruder: target=215 temp=215.0 pwm=0.515
Stats 5072.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=4078579 bytes_read=2019480 bytes_retransmit=9 bytes_invalid=0 send_seq=111577 receive_seq=111577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=865757 sysload=0.01 cputime=269.959 memavail=1626212 print_time=5083.219 buffer_time=2.093 print_stall=10 extruder: target=215 temp=214.9 pwm=0.561
Stats 5073.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=4080436 bytes_read=2019972 bytes_retransmit=9 bytes_invalid=0 send_seq=111618 receive_seq=111618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=867696 sysload=0.01 cputime=270.045 memavail=1626156 print_time=5084.400 buffer_time=2.272 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 5074.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=4082164 bytes_read=2020474 bytes_retransmit=9 bytes_invalid=0 send_seq=111657 receive_seq=111655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=869609 sysload=0.01 cputime=270.129 memavail=1626448 print_time=5085.127 buffer_time=1.998 print_stall=10 extruder: target=215 temp=214.8 pwm=0.602
Stats 5075.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=4083937 bytes_read=2020975 bytes_retransmit=9 bytes_invalid=0 send_seq=111696 receive_seq=111695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.781 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=871042 sysload=0.09 cputime=270.209 memavail=1626632 print_time=5086.216 buffer_time=2.083 print_stall=10 extruder: target=215 temp=214.8 pwm=0.619
Stats 5076.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=4085335 bytes_read=2021437 bytes_retransmit=9 bytes_invalid=0 send_seq=111730 receive_seq=111730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.167 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=873642 sysload=0.09 cputime=270.303 memavail=1626704 print_time=5087.237 buffer_time=2.104 print_stall=10 extruder: target=215 temp=215.0 pwm=0.495
Stats 5077.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4086279 bytes_read=2021899 bytes_retransmit=9 bytes_invalid=0 send_seq=111756 receive_seq=111756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.630 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=874995 sysload=0.09 cputime=270.374 memavail=1626404 print_time=5088.163 buffer_time=2.030 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 5078.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4088390 bytes_read=2022430 bytes_retransmit=9 bytes_invalid=0 send_seq=111802 receive_seq=111802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=875567 sysload=0.09 cputime=270.415 memavail=1626180 print_time=5089.312 buffer_time=2.178 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 5079.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4089500 bytes_read=2022847 bytes_retransmit=9 bytes_invalid=0 send_seq=111828 receive_seq=111828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=875727 sysload=0.09 cputime=270.469 memavail=1626388 print_time=5090.209 buffer_time=2.074 print_stall=10 extruder: target=215 temp=214.9 pwm=0.473
Stats 5080.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4090900 bytes_read=2023324 bytes_retransmit=9 bytes_invalid=0 send_seq=111860 receive_seq=111860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=876043 sysload=0.16 cputime=270.536 memavail=1626160 print_time=5091.394 buffer_time=2.255 print_stall=10 extruder: target=215 temp=215.1 pwm=0.357
Stats 5081.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4092048 bytes_read=2023775 bytes_retransmit=9 bytes_invalid=0 send_seq=111890 receive_seq=111890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=876233 sysload=0.16 cputime=270.600 memavail=1626420 print_time=5092.158 buffer_time=2.019 print_stall=10 extruder: target=215 temp=215.1 pwm=0.386
Stats 5082.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=4095383 bytes_read=2024397 bytes_retransmit=9 bytes_invalid=0 send_seq=111955 receive_seq=111954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=878122 sysload=0.16 cputime=270.683 memavail=1626428 print_time=5093.638 buffer_time=2.498 print_stall=10 extruder: target=215 temp=214.9 pwm=0.514
Stats 5083.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=4097219 bytes_read=2024924 bytes_retransmit=9 bytes_invalid=0 send_seq=111996 receive_seq=111996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.038 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=878563 sysload=0.16 cputime=270.748 memavail=1626392 print_time=5094.533 buffer_time=2.392 print_stall=10 extruder: target=215 temp=215.1 pwm=0.417
Stats 5084.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=4098474 bytes_read=2025380 bytes_retransmit=9 bytes_invalid=0 send_seq=112028 receive_seq=112027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=879055 sysload=0.16 cputime=270.812 memavail=1626208 print_time=5095.221 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.0 pwm=0.450
Stats 5085.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=4099963 bytes_read=2025852 bytes_retransmit=9 bytes_invalid=0 send_seq=112064 receive_seq=112064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=879892 sysload=0.23 cputime=270.880 memavail=1626164 print_time=5096.363 buffer_time=2.219 print_stall=10 extruder: target=215 temp=214.9 pwm=0.536
Stats 5086.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=4101805 bytes_read=2026369 bytes_retransmit=9 bytes_invalid=0 send_seq=112105 receive_seq=112104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=880653 sysload=0.23 cputime=270.947 memavail=1626208 print_time=5097.505 buffer_time=2.360 print_stall=10 extruder: target=215 temp=214.9 pwm=0.577
Stats 5087.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4103944 bytes_read=2026910 bytes_retransmit=9 bytes_invalid=0 send_seq=112149 receive_seq=112149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=881383 sysload=0.23 cputime=271.016 memavail=1626076 print_time=5098.819 buffer_time=2.674 print_stall=10 extruder: target=215 temp=215.0 pwm=0.461
Stats 5088.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4104781 bytes_read=2027307 bytes_retransmit=9 bytes_invalid=0 send_seq=112172 receive_seq=112171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=881956 sysload=0.23 cputime=271.072 memavail=1626464 print_time=5099.287 buffer_time=2.139 print_stall=10 extruder: target=215 temp=214.9 pwm=0.524
Stats 5089.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4106321 bytes_read=2027804 bytes_retransmit=9 bytes_invalid=0 send_seq=112207 receive_seq=112207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=882836 sysload=0.23 cputime=271.135 memavail=1626312 print_time=5100.562 buffer_time=2.412 print_stall=10 extruder: target=215 temp=215.1 pwm=0.381
Stats 5090.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4107461 bytes_read=2028245 bytes_retransmit=9 bytes_invalid=0 send_seq=112236 receive_seq=112235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.199 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=883632 sysload=0.29 cputime=271.207 memavail=1626056 print_time=5101.435 buffer_time=2.284 print_stall=10 extruder: target=215 temp=215.1 pwm=0.366
Stats 5091.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4108500 bytes_read=2028672 bytes_retransmit=9 bytes_invalid=0 send_seq=112264 receive_seq=112263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.275 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=884222 sysload=0.29 cputime=271.274 memavail=1626180 print_time=5102.451 buffer_time=2.299 print_stall=10 extruder: target=215 temp=215.0 pwm=0.414
Stats 5092.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4109749 bytes_read=2029169 bytes_retransmit=9 bytes_invalid=0 send_seq=112296 receive_seq=112296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=884580 sysload=0.29 cputime=271.338 memavail=1626500 print_time=5103.200 buffer_time=2.046 print_stall=10 extruder: target=215 temp=214.7 pwm=0.591
Stats 5093.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4110653 bytes_read=2029585 bytes_retransmit=9 bytes_invalid=0 send_seq=112319 receive_seq=112319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=885237 sysload=0.29 cputime=271.399 memavail=1626440 print_time=5104.303 buffer_time=2.149 print_stall=10 extruder: target=215 temp=214.7 pwm=0.562
Stats 5094.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4111503 bytes_read=2029987 bytes_retransmit=9 bytes_invalid=0 send_seq=112342 receive_seq=112342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.305 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=885922 sysload=0.29 cputime=271.441 memavail=1626944 print_time=5105.184 buffer_time=2.029 print_stall=10 extruder: target=215 temp=215.0 pwm=0.323
Stats 5095.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4112225 bytes_read=2030404 bytes_retransmit=9 bytes_invalid=0 send_seq=112362 receive_seq=112362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=886568 sysload=0.43 cputime=271.507 memavail=1626708 print_time=5106.312 buffer_time=2.155 print_stall=10 extruder: target=215 temp=214.6 pwm=0.571
Stats 5096.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4113052 bytes_read=2030825 bytes_retransmit=9 bytes_invalid=0 send_seq=112386 receive_seq=112386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=887127 sysload=0.43 cputime=271.573 memavail=1627020 print_time=5107.163 buffer_time=2.005 print_stall=10 extruder: target=215 temp=214.5 pwm=0.625
Stats 5097.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4113890 bytes_read=2031253 bytes_retransmit=9 bytes_invalid=0 send_seq=112410 receive_seq=112409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=887978 sysload=0.43 cputime=271.642 memavail=1627308 print_time=5108.323 buffer_time=2.164 print_stall=10 extruder: target=215 temp=214.6 pwm=0.543
Stats 5098.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4114674 bytes_read=2031690 bytes_retransmit=9 bytes_invalid=0 send_seq=112433 receive_seq=112433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.8 pwm=0.813 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=888568 sysload=0.43 cputime=271.701 memavail=1627584 print_time=5109.301 buffer_time=2.142 print_stall=10 extruder: target=215 temp=214.4 pwm=0.662
Stats 5099.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4115812 bytes_read=2032131 bytes_retransmit=9 bytes_invalid=0 send_seq=112461 receive_seq=112461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=888994 sysload=0.43 cputime=271.765 memavail=1627828 print_time=5111.247 buffer_time=3.085 print_stall=10 extruder: target=215 temp=214.5 pwm=0.577
Stats 5100.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4116035 bytes_read=2032478 bytes_retransmit=9 bytes_invalid=0 send_seq=112473 receive_seq=112473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=888994 sysload=0.47 cputime=271.814 memavail=1628132 print_time=5111.247 buffer_time=2.084 print_stall=10 extruder: target=215 temp=214.7 pwm=0.458
Stats 5101.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4116703 bytes_read=2032900 bytes_retransmit=9 bytes_invalid=0 send_seq=112494 receive_seq=112494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=889444 sysload=0.47 cputime=271.874 memavail=1628376 print_time=5112.437 buffer_time=2.274 print_stall=10 extruder: target=215 temp=214.5 pwm=0.626
Stats 5102.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4117247 bytes_read=2033311 bytes_retransmit=9 bytes_invalid=0 send_seq=112513 receive_seq=112513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=889747 sysload=0.47 cputime=271.928 memavail=1628392 print_time=5113.913 buffer_time=2.749 print_stall=10 extruder: target=215 temp=214.7 pwm=0.472
Stats 5103.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4118031 bytes_read=2033703 bytes_retransmit=9 bytes_invalid=0 send_seq=112535 receive_seq=112534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.491 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=890002 sysload=0.47 cputime=271.983 memavail=1627928 print_time=5114.736 buffer_time=2.569 print_stall=10 extruder: target=215 temp=215.0 pwm=0.301
Stats 5104.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4118589 bytes_read=2034125 bytes_retransmit=9 bytes_invalid=0 send_seq=112555 receive_seq=112555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.8 pwm=0.826 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=890351 sysload=0.47 cputime=272.040 memavail=1628124 print_time=5115.334 buffer_time=2.167 print_stall=10 extruder: target=215 temp=214.7 pwm=0.635
Stats 5105.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4119509 bytes_read=2034551 bytes_retransmit=9 bytes_invalid=0 send_seq=112580 receive_seq=112580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=891107 sysload=0.52 cputime=272.106 memavail=1628204 print_time=5116.261 buffer_time=2.093 print_stall=10 extruder: target=215 temp=214.7 pwm=0.673
Stats 5106.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4120330 bytes_read=2034958 bytes_retransmit=9 bytes_invalid=0 send_seq=112604 receive_seq=112604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.2 sd_pos=891580 sysload=0.52 cputime=272.165 memavail=1627700 print_time=5117.496 buffer_time=2.327 print_stall=10 extruder: target=215 temp=215.0 pwm=0.430
Stats 5107.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4121118 bytes_read=2035409 bytes_retransmit=9 bytes_invalid=0 send_seq=112625 receive_seq=112625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=892051 sysload=0.52 cputime=272.220 memavail=1627708 print_time=5118.238 buffer_time=2.069 print_stall=10 extruder: target=215 temp=214.8 pwm=0.581
Stats 5108.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4122121 bytes_read=2035821 bytes_retransmit=9 bytes_invalid=0 send_seq=112651 receive_seq=112650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=892750 sysload=0.52 cputime=272.264 memavail=1627468 print_time=5119.409 buffer_time=2.236 print_stall=10 extruder: target=215 temp=214.9 pwm=0.439
Stats 5109.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4123029 bytes_read=2036228 bytes_retransmit=9 bytes_invalid=0 send_seq=112674 receive_seq=112674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=893212 sysload=0.52 cputime=272.326 memavail=1627196 print_time=5120.221 buffer_time=2.048 print_stall=10 extruder: target=215 temp=214.8 pwm=0.585
Stats 5110.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4123622 bytes_read=2036649 bytes_retransmit=9 bytes_invalid=0 send_seq=112692 receive_seq=112692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.718 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=893401 sysload=0.56 cputime=272.364 memavail=1627148 print_time=5121.216 buffer_time=2.041 print_stall=10 extruder: target=215 temp=214.8 pwm=0.530
Stats 5111.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4124161 bytes_read=2037021 bytes_retransmit=9 bytes_invalid=0 send_seq=112709 receive_seq=112709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=893585 sysload=0.56 cputime=272.419 memavail=1627116 print_time=5122.211 buffer_time=2.035 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 5112.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=4124699 bytes_read=2037408 bytes_retransmit=9 bytes_invalid=0 send_seq=112726 receive_seq=112726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=893772 sysload=0.56 cputime=272.451 memavail=1627140 print_time=5123.205 buffer_time=2.029 print_stall=10 extruder: target=215 temp=215.0 pwm=0.458
Stats 5113.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=4125337 bytes_read=2037839 bytes_retransmit=9 bytes_invalid=0 send_seq=112747 receive_seq=112746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=893968 sysload=0.56 cputime=272.489 memavail=1627140 print_time=5124.200 buffer_time=2.022 print_stall=10 extruder: target=215 temp=214.9 pwm=0.509
Stats 5114.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=4125918 bytes_read=2038231 bytes_retransmit=9 bytes_invalid=0 send_seq=112767 receive_seq=112767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.160 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=894159 sysload=0.56 cputime=272.545 memavail=1627140 print_time=5125.195 buffer_time=2.015 print_stall=10 extruder: target=215 temp=214.9 pwm=0.570
Stats 5115.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=4127976 bytes_read=2038743 bytes_retransmit=9 bytes_invalid=0 send_seq=112810 receive_seq=112809 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=894929 sysload=0.59 cputime=272.610 memavail=1627144 print_time=5126.786 buffer_time=2.606 print_stall=10 extruder: target=215 temp=215.0 pwm=0.542
Stats 5116.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=4129301 bytes_read=2039219 bytes_retransmit=9 bytes_invalid=0 send_seq=112841 receive_seq=112841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.511 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=895242 sysload=0.59 cputime=272.665 memavail=1627184 print_time=5127.391 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.0 pwm=0.546
Stats 5117.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4130429 bytes_read=2039661 bytes_retransmit=9 bytes_invalid=0 send_seq=112869 receive_seq=112869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=895496 sysload=0.59 cputime=272.721 memavail=1626876 print_time=5128.232 buffer_time=2.050 print_stall=10 extruder: target=215 temp=215.0 pwm=0.534
Stats 5118.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4131714 bytes_read=2040113 bytes_retransmit=9 bytes_invalid=0 send_seq=112900 receive_seq=112899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.189 rpi: temp=57.5 mcu_temp: temp=41.1 sd_pos=895688 sysload=0.59 cputime=272.755 memavail=1626856 print_time=5129.310 buffer_time=2.127 print_stall=10 extruder: target=215 temp=215.0 pwm=0.504
Stats 5119.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4133408 bytes_read=2040619 bytes_retransmit=9 bytes_invalid=0 send_seq=112938 receive_seq=112937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=896068 sysload=0.59 cputime=272.793 memavail=1626876 print_time=5130.522 buffer_time=2.336 print_stall=10 extruder: target=215 temp=215.1 pwm=0.453
Stats 5120.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4135790 bytes_read=2041148 bytes_retransmit=9 bytes_invalid=0 send_seq=112987 receive_seq=112986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=897372 sysload=0.70 cputime=272.870 memavail=1627032 print_time=5131.509 buffer_time=2.320 print_stall=10 extruder: target=215 temp=215.3 pwm=0.303
Stats 5121.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4137578 bytes_read=2041654 bytes_retransmit=9 bytes_invalid=0 send_seq=113029 receive_seq=113029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=897813 sysload=0.70 cputime=272.934 memavail=1627028 print_time=5132.266 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.0 pwm=0.518
Stats 5122.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4139762 bytes_read=2042203 bytes_retransmit=9 bytes_invalid=0 send_seq=113075 receive_seq=113075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.482 rpi: temp=57.5 mcu_temp: temp=41.4 sd_pos=900076 sysload=0.70 cputime=273.022 memavail=1627532 print_time=5133.481 buffer_time=2.292 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 5123.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4140795 bytes_read=2042610 bytes_retransmit=9 bytes_invalid=0 send_seq=113101 receive_seq=113101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.198 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=902014 sysload=0.70 cputime=273.098 memavail=1627052 print_time=5134.261 buffer_time=2.070 print_stall=10 extruder: target=215 temp=215.1 pwm=0.436
Stats 5124.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4142115 bytes_read=2043062 bytes_retransmit=9 bytes_invalid=0 send_seq=113133 receive_seq=113132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.348 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=904131 sysload=0.70 cputime=273.179 memavail=1626968 print_time=5135.301 buffer_time=2.110 print_stall=10 extruder: target=215 temp=214.9 pwm=0.563
Stats 5125.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4143359 bytes_read=2043533 bytes_retransmit=9 bytes_invalid=0 send_seq=113163 receive_seq=113163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.608 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=906454 sysload=0.73 cputime=273.263 memavail=1627000 print_time=5136.340 buffer_time=2.148 print_stall=10 extruder: target=215 temp=214.9 pwm=0.606
Stats 5126.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4144965 bytes_read=2043990 bytes_retransmit=9 bytes_invalid=0 send_seq=113199 receive_seq=113197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=57.5 mcu_temp: temp=41.6 sd_pos=908861 sysload=0.73 cputime=273.325 memavail=1626700 print_time=5137.374 buffer_time=2.177 print_stall=10 extruder: target=215 temp=215.1 pwm=0.425
Stats 5127.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000065 bytes_write=4147312 bytes_read=2044557 bytes_retransmit=9 bytes_invalid=0 send_seq=113247 receive_seq=113247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=911830 sysload=0.73 cputime=273.413 memavail=1626972 print_time=5138.562 buffer_time=2.363 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 5128.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000065 bytes_write=4148545 bytes_read=2045033 bytes_retransmit=9 bytes_invalid=0 send_seq=113279 receive_seq=113279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.088 rpi: temp=57.5 mcu_temp: temp=41.4 sd_pos=912256 sysload=0.73 cputime=273.446 memavail=1626392 print_time=5139.298 buffer_time=2.099 print_stall=10 extruder: target=215 temp=215.2 pwm=0.393
Stats 5129.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000065 bytes_write=4150000 bytes_read=2045490 bytes_retransmit=9 bytes_invalid=0 send_seq=113313 receive_seq=113313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.132 rpi: temp=57.5 mcu_temp: temp=41.2 sd_pos=913123 sysload=0.73 cputime=273.493 memavail=1625408 print_time=5140.417 buffer_time=2.218 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 5130.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000065 bytes_write=4151574 bytes_read=2045967 bytes_retransmit=9 bytes_invalid=0 send_seq=113348 receive_seq=113348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=58.4 mcu_temp: temp=40.7 sd_pos=913819 sysload=0.75 cputime=273.534 memavail=1624960 print_time=5141.474 buffer_time=2.274 print_stall=10 extruder: target=215 temp=215.0 pwm=0.552
Stats 5131.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000065 bytes_write=4152951 bytes_read=2046438 bytes_retransmit=9 bytes_invalid=0 send_seq=113380 receive_seq=113379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.711 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=914481 sysload=0.75 cputime=273.585 memavail=1620940 print_time=5142.409 buffer_time=2.208 print_stall=10 extruder: target=215 temp=215.0 pwm=0.491
Stats 5132.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=4154667 bytes_read=2046930 bytes_retransmit=9 bytes_invalid=0 send_seq=113418 receive_seq=113417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.464 rpi: temp=57.5 mcu_temp: temp=40.6 sd_pos=915121 sysload=0.75 cputime=273.631 memavail=1625836 print_time=5143.277 buffer_time=2.075 print_stall=10 extruder: target=215 temp=214.9 pwm=0.449
Stats 5133.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=4156363 bytes_read=2047417 bytes_retransmit=9 bytes_invalid=0 send_seq=113454 receive_seq=113454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.935 rpi: temp=58.4 mcu_temp: temp=40.9 sd_pos=916125 sysload=0.75 cputime=273.701 memavail=1626284 print_time=5144.646 buffer_time=2.442 print_stall=10 extruder: target=215 temp=214.9 pwm=0.515
Stats 5134.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=4157389 bytes_read=2047863 bytes_retransmit=9 bytes_invalid=0 send_seq=113480 receive_seq=113480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.485 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=916922 sysload=0.75 cputime=273.763 memavail=1626064 print_time=5145.519 buffer_time=2.313 print_stall=10 extruder: target=215 temp=215.0 pwm=0.515
Stats 5135.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=4159035 bytes_read=2048325 bytes_retransmit=9 bytes_invalid=0 send_seq=113516 receive_seq=113515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=917673 sysload=0.77 cputime=273.829 memavail=1626212 print_time=5146.834 buffer_time=2.626 print_stall=10 extruder: target=215 temp=215.0 pwm=0.505
Stats 5136.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=4159711 bytes_read=2048752 bytes_retransmit=9 bytes_invalid=0 send_seq=113537 receive_seq=113537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.866 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=917935 sysload=0.77 cputime=273.869 memavail=1614660 print_time=5147.354 buffer_time=2.146 print_stall=10 extruder: target=215 temp=215.1 pwm=0.492
Stats 5137.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4160675 bytes_read=2049203 bytes_retransmit=9 bytes_invalid=0 send_seq=113564 receive_seq=113564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.569 rpi: temp=57.9 mcu_temp: temp=41.1 sd_pos=918587 sysload=0.77 cputime=273.905 memavail=1627068 print_time=5148.437 buffer_time=2.229 print_stall=10 extruder: target=215 temp=215.0 pwm=0.513
Stats 5138.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4161452 bytes_read=2049595 bytes_retransmit=9 bytes_invalid=0 send_seq=113585 receive_seq=113585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.5 sd_pos=919270 sysload=0.77 cputime=273.954 memavail=1627308 print_time=5149.295 buffer_time=2.086 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 5139.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4162113 bytes_read=2050007 bytes_retransmit=9 bytes_invalid=0 send_seq=113604 receive_seq=113604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=919885 sysload=0.77 cputime=274.013 memavail=1627036 print_time=5150.394 buffer_time=2.183 print_stall=10 extruder: target=215 temp=215.4 pwm=0.186
Stats 5140.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4162952 bytes_read=2050423 bytes_retransmit=9 bytes_invalid=0 send_seq=113627 receive_seq=113627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.2 sd_pos=920445 sysload=0.79 cputime=274.072 memavail=1627288 print_time=5151.246 buffer_time=2.035 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 5141.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4163803 bytes_read=2050825 bytes_retransmit=9 bytes_invalid=0 send_seq=113651 receive_seq=113650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.463 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=921294 sysload=0.79 cputime=274.135 memavail=1627300 print_time=5152.407 buffer_time=2.194 print_stall=10 extruder: target=215 temp=215.1 pwm=0.439
Stats 5142.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4164572 bytes_read=2051277 bytes_retransmit=9 bytes_invalid=0 send_seq=113674 receive_seq=113674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.473 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=921880 sysload=0.79 cputime=274.193 memavail=1627532 print_time=5153.390 buffer_time=2.176 print_stall=10 extruder: target=215 temp=214.9 pwm=0.608
Stats 5143.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4165465 bytes_read=2051708 bytes_retransmit=9 bytes_invalid=0 send_seq=113700 receive_seq=113700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.426 rpi: temp=57.5 mcu_temp: temp=41.1 sd_pos=922309 sysload=0.79 cputime=274.251 memavail=1627812 print_time=5155.335 buffer_time=3.118 print_stall=10 extruder: target=215 temp=215.1 pwm=0.491
Stats 5144.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4165735 bytes_read=2052070 bytes_retransmit=9 bytes_invalid=0 send_seq=113715 receive_seq=113715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.515 rpi: temp=57.5 mcu_temp: temp=40.9 sd_pos=922309 sysload=0.79 cputime=274.300 memavail=1627560 print_time=5155.335 buffer_time=2.117 print_stall=10 extruder: target=215 temp=215.0 pwm=0.474
Stats 5145.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4166416 bytes_read=2052492 bytes_retransmit=9 bytes_invalid=0 send_seq=113736 receive_seq=113736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.385 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=922759 sysload=0.81 cputime=274.355 memavail=1627268 print_time=5156.464 buffer_time=2.246 print_stall=10 extruder: target=215 temp=214.9 pwm=0.503
Stats 5146.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4166964 bytes_read=2052898 bytes_retransmit=9 bytes_invalid=0 send_seq=113757 receive_seq=113757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.315 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=923064 sysload=0.81 cputime=274.409 memavail=1627312 print_time=5157.996 buffer_time=2.777 print_stall=10 extruder: target=215 temp=214.8 pwm=0.591
Stats 5147.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=4167766 bytes_read=2053315 bytes_retransmit=9 bytes_invalid=0 send_seq=113780 receive_seq=113780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.5 sd_pos=923319 sysload=0.81 cputime=274.461 memavail=1627540 print_time=5158.820 buffer_time=2.600 print_stall=10 extruder: target=215 temp=214.7 pwm=0.623
Stats 5148.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=4168287 bytes_read=2053717 bytes_retransmit=9 bytes_invalid=0 send_seq=113797 receive_seq=113797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=923666 sysload=0.81 cputime=274.496 memavail=1627556 print_time=5159.418 buffer_time=2.196 print_stall=10 extruder: target=215 temp=214.8 pwm=0.513
Stats 5149.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=4169197 bytes_read=2054143 bytes_retransmit=9 bytes_invalid=0 send_seq=113823 receive_seq=113822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=924332 sysload=0.81 cputime=274.556 memavail=1627548 print_time=5160.225 buffer_time=2.002 print_stall=10 extruder: target=215 temp=214.9 pwm=0.480
Stats 5150.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=4170080 bytes_read=2054550 bytes_retransmit=9 bytes_invalid=0 send_seq=113847 receive_seq=113846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.511 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=924901 sysload=0.90 cputime=274.613 memavail=1627296 print_time=5161.579 buffer_time=2.352 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 5151.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=4170884 bytes_read=2054977 bytes_retransmit=9 bytes_invalid=0 send_seq=113869 receive_seq=113868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.172 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=925375 sysload=0.90 cputime=274.672 memavail=1627312 print_time=5162.322 buffer_time=2.093 print_stall=10 extruder: target=215 temp=214.9 pwm=0.454
Stats 5152.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4171846 bytes_read=2055418 bytes_retransmit=9 bytes_invalid=0 send_seq=113894 receive_seq=113893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.476 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=926071 sysload=0.90 cputime=274.738 memavail=1627304 print_time=5163.493 buffer_time=2.261 print_stall=10 extruder: target=215 temp=215.0 pwm=0.467
Stats 5153.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4172823 bytes_read=2055835 bytes_retransmit=9 bytes_invalid=0 send_seq=113919 receive_seq=113919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=926629 sysload=0.90 cputime=274.800 memavail=1627276 print_time=5164.384 buffer_time=2.152 print_stall=10 extruder: target=215 temp=215.0 pwm=0.467
Stats 5154.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4173634 bytes_read=2056262 bytes_retransmit=9 bytes_invalid=0 send_seq=113942 receive_seq=113941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=926853 sysload=0.90 cputime=274.860 memavail=1627416 print_time=5165.371 buffer_time=2.136 print_stall=10 extruder: target=215 temp=214.9 pwm=0.581
Stats 5155.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4174308 bytes_read=2056694 bytes_retransmit=9 bytes_invalid=0 send_seq=113965 receive_seq=113965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.365 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=927104 sysload=0.99 cputime=274.915 memavail=1627384 print_time=5166.358 buffer_time=2.122 print_stall=10 extruder: target=215 temp=214.9 pwm=0.509
Stats 5156.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4174847 bytes_read=2057076 bytes_retransmit=9 bytes_invalid=0 send_seq=113984 receive_seq=113984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=927326 sysload=0.99 cputime=274.967 memavail=1627360 print_time=5167.345 buffer_time=2.109 print_stall=10 extruder: target=215 temp=215.0 pwm=0.489
Stats 5157.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=4175442 bytes_read=2057508 bytes_retransmit=9 bytes_invalid=0 send_seq=114004 receive_seq=114004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.559 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=927557 sysload=0.99 cputime=275.021 memavail=1627108 print_time=5168.332 buffer_time=2.095 print_stall=10 extruder: target=215 temp=215.0 pwm=0.468
Stats 5158.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=4176082 bytes_read=2057909 bytes_retransmit=9 bytes_invalid=0 send_seq=114024 receive_seq=114024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=927816 sysload=0.99 cputime=275.059 memavail=1627104 print_time=5169.319 buffer_time=2.082 print_stall=10 extruder: target=215 temp=215.1 pwm=0.464
Stats 5159.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=4176806 bytes_read=2058306 bytes_retransmit=9 bytes_invalid=0 send_seq=114046 receive_seq=114046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=57.5 mcu_temp: temp=40.9 sd_pos=928155 sysload=0.99 cputime=275.111 memavail=1627128 print_time=5170.239 buffer_time=2.001 print_stall=10 extruder: target=215 temp=214.9 pwm=0.535
Stats 5160.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=4178425 bytes_read=2058813 bytes_retransmit=9 bytes_invalid=0 send_seq=114084 receive_seq=114084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=57.5 mcu_temp: temp=41.4 sd_pos=930143 sysload=1.15 cputime=275.190 memavail=1627380 print_time=5171.345 buffer_time=2.106 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 5161.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=4180813 bytes_read=2059349 bytes_retransmit=9 bytes_invalid=0 send_seq=114132 receive_seq=114131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.712 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=932269 sysload=1.15 cputime=275.274 memavail=1627836 print_time=5172.581 buffer_time=2.340 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 5162.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=4181645 bytes_read=2059776 bytes_retransmit=9 bytes_invalid=0 send_seq=114156 receive_seq=114156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=934323 sysload=1.15 cputime=275.350 memavail=1627660 print_time=5173.422 buffer_time=2.181 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 5163.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4182861 bytes_read=2060243 bytes_retransmit=9 bytes_invalid=0 send_seq=114186 receive_seq=114186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=936554 sysload=1.15 cputime=275.426 memavail=1627616 print_time=5174.451 buffer_time=2.210 print_stall=10 extruder: target=215 temp=214.8 pwm=0.620
Stats 5164.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4184097 bytes_read=2060694 bytes_retransmit=9 bytes_invalid=0 send_seq=114216 receive_seq=114216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.518 rpi: temp=57.5 mcu_temp: temp=40.3 sd_pos=938220 sysload=1.15 cputime=275.478 memavail=1627376 print_time=5175.365 buffer_time=2.122 print_stall=10 extruder: target=215 temp=214.8 pwm=0.536
Stats 5165.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4185681 bytes_read=2061166 bytes_retransmit=9 bytes_invalid=0 send_seq=114253 receive_seq=114253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.431 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=939404 sysload=1.22 cputime=275.545 memavail=1627592 print_time=5176.460 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.2 pwm=0.260
Stats 5166.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4186748 bytes_read=2061618 bytes_retransmit=9 bytes_invalid=0 send_seq=114281 receive_seq=114280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=941106 sysload=1.22 cputime=275.598 memavail=1627636 print_time=5177.256 buffer_time=2.010 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 5167.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4188065 bytes_read=2062089 bytes_retransmit=9 bytes_invalid=0 send_seq=114312 receive_seq=114311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=943820 sysload=1.22 cputime=275.682 memavail=1627840 print_time=5178.286 buffer_time=2.039 print_stall=10 extruder: target=215 temp=214.9 pwm=0.501
Stats 5168.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4189875 bytes_read=2062576 bytes_retransmit=9 bytes_invalid=0 send_seq=114351 receive_seq=114351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=945302 sysload=1.22 cputime=275.751 memavail=1627816 print_time=5179.625 buffer_time=2.377 print_stall=10 extruder: target=215 temp=214.8 pwm=0.563
Stats 5169.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4190995 bytes_read=2063033 bytes_retransmit=9 bytes_invalid=0 send_seq=114379 receive_seq=114379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=57.5 mcu_temp: temp=40.3 sd_pos=945552 sysload=1.22 cputime=275.807 memavail=1627812 print_time=5180.263 buffer_time=2.015 print_stall=10 extruder: target=215 temp=214.9 pwm=0.559
Stats 5170.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4192409 bytes_read=2063504 bytes_retransmit=9 bytes_invalid=0 send_seq=114413 receive_seq=114413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.167 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=945836 sysload=1.20 cputime=275.864 memavail=1627316 print_time=5181.580 buffer_time=2.329 print_stall=10 extruder: target=215 temp=214.9 pwm=0.553
Stats 5171.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4193810 bytes_read=2063956 bytes_retransmit=9 bytes_invalid=0 send_seq=114446 receive_seq=114446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=57.5 mcu_temp: temp=41.0 sd_pos=946060 sysload=1.20 cputime=275.925 memavail=1627324 print_time=5182.379 buffer_time=2.125 print_stall=10 extruder: target=215 temp=215.2 pwm=0.274
Stats 5172.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4195678 bytes_read=2064483 bytes_retransmit=9 bytes_invalid=0 send_seq=114485 receive_seq=114485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=946440 sysload=1.20 cputime=275.983 memavail=1626820 print_time=5183.588 buffer_time=2.333 print_stall=10 extruder: target=215 temp=215.1 pwm=0.430
Stats 5173.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4198365 bytes_read=2065064 bytes_retransmit=9 bytes_invalid=0 send_seq=114541 receive_seq=114541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=948033 sysload=1.20 cputime=276.055 memavail=1626536 print_time=5184.639 buffer_time=2.383 print_stall=10 extruder: target=215 temp=214.8 pwm=0.589
Stats 5174.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4200026 bytes_read=2065546 bytes_retransmit=9 bytes_invalid=0 send_seq=114580 receive_seq=114580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.572 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=948256 sysload=1.20 cputime=276.113 memavail=1626252 print_time=5185.359 buffer_time=2.102 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 5175.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4201398 bytes_read=2066033 bytes_retransmit=9 bytes_invalid=0 send_seq=114614 receive_seq=114614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=948916 sysload=1.27 cputime=276.173 memavail=1626500 print_time=5186.361 buffer_time=2.103 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 5176.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4203360 bytes_read=2066544 bytes_retransmit=9 bytes_invalid=0 send_seq=114656 receive_seq=114656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=949780 sysload=1.27 cputime=276.241 memavail=1626240 print_time=5187.566 buffer_time=2.308 print_stall=10 extruder: target=215 temp=215.0 pwm=0.535
Stats 5177.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4204332 bytes_read=2066986 bytes_retransmit=9 bytes_invalid=0 send_seq=114684 receive_seq=114684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.038 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=950248 sysload=1.27 cputime=276.301 memavail=1626492 print_time=5188.269 buffer_time=2.011 print_stall=10 extruder: target=215 temp=215.1 pwm=0.429
Stats 5178.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4206813 bytes_read=2067543 bytes_retransmit=9 bytes_invalid=0 send_seq=114732 receive_seq=114732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=951259 sysload=1.27 cputime=276.350 memavail=1626448 print_time=5189.837 buffer_time=2.578 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 5179.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4207788 bytes_read=2067974 bytes_retransmit=9 bytes_invalid=0 send_seq=114758 receive_seq=114758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.696 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=951767 sysload=1.27 cputime=276.410 memavail=1626416 print_time=5190.389 buffer_time=2.129 print_stall=10 extruder: target=215 temp=215.2 pwm=0.409
Stats 5180.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4208987 bytes_read=2068404 bytes_retransmit=9 bytes_invalid=0 send_seq=114788 receive_seq=114788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=57.5 mcu_temp: temp=41.2 sd_pos=952406 sysload=1.24 cputime=276.477 memavail=1626196 print_time=5191.445 buffer_time=2.184 print_stall=10 extruder: target=215 temp=215.0 pwm=0.589
Stats 5181.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4210335 bytes_read=2068864 bytes_retransmit=9 bytes_invalid=0 send_seq=114820 receive_seq=114819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=953422 sysload=1.24 cputime=276.550 memavail=1626200 print_time=5192.505 buffer_time=2.244 print_stall=10 extruder: target=215 temp=215.2 pwm=0.455
Stats 5182.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4211583 bytes_read=2069309 bytes_retransmit=9 bytes_invalid=0 send_seq=114848 receive_seq=114847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=954094 sysload=1.24 cputime=276.612 memavail=1626696 print_time=5193.541 buffer_time=2.279 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 5183.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4212541 bytes_read=2069721 bytes_retransmit=9 bytes_invalid=0 send_seq=114875 receive_seq=114874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=954520 sysload=1.24 cputime=276.673 memavail=1626704 print_time=5194.424 buffer_time=2.160 print_stall=10 extruder: target=215 temp=215.2 pwm=0.386
Stats 5184.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4213404 bytes_read=2070163 bytes_retransmit=9 bytes_invalid=0 send_seq=114899 receive_seq=114899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=955210 sysload=1.24 cputime=276.734 memavail=1626908 print_time=5195.482 buffer_time=2.219 print_stall=10 extruder: target=215 temp=215.2 pwm=0.446
Stats 5185.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4214255 bytes_read=2070574 bytes_retransmit=9 bytes_invalid=0 send_seq=114922 receive_seq=114921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=955855 sysload=1.31 cputime=276.794 memavail=1626436 print_time=5196.396 buffer_time=2.131 print_stall=10 extruder: target=215 temp=214.9 pwm=0.575
Stats 5186.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4214856 bytes_read=2070961 bytes_retransmit=9 bytes_invalid=0 send_seq=114941 receive_seq=114941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.151 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=956473 sysload=1.31 cputime=276.850 memavail=1626468 print_time=5197.276 buffer_time=2.011 print_stall=10 extruder: target=215 temp=214.9 pwm=0.573
Stats 5187.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4215637 bytes_read=2071408 bytes_retransmit=9 bytes_invalid=0 send_seq=114964 receive_seq=114964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=57.5 mcu_temp: temp=41.2 sd_pos=957127 sysload=1.31 cputime=276.906 memavail=1626732 print_time=5198.334 buffer_time=2.068 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
Stats 5188.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4216591 bytes_read=2071829 bytes_retransmit=9 bytes_invalid=0 send_seq=114988 receive_seq=114988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=957977 sysload=1.31 cputime=276.967 memavail=1626772 print_time=5199.495 buffer_time=2.227 print_stall=10 extruder: target=215 temp=215.1 pwm=0.391
Stats 5189.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4217491 bytes_read=2072236 bytes_retransmit=9 bytes_invalid=0 send_seq=115012 receive_seq=115012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=958619 sysload=1.31 cputime=277.028 memavail=1626496 print_time=5200.629 buffer_time=2.359 print_stall=10 extruder: target=215 temp=214.9 pwm=0.510
Stats 5190.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4217983 bytes_read=2072657 bytes_retransmit=9 bytes_invalid=0 send_seq=115030 receive_seq=115030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=57.0 mcu_temp: temp=40.8 sd_pos=958718 sysload=1.28 cputime=277.081 memavail=1626244 print_time=5202.051 buffer_time=2.780 print_stall=10 extruder: target=215 temp=214.9 pwm=0.510
Stats 5191.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4218371 bytes_read=2073024 bytes_retransmit=9 bytes_invalid=0 send_seq=115046 receive_seq=115046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.005 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=958912 sysload=1.28 cputime=277.130 memavail=1626268 print_time=5202.559 buffer_time=2.288 print_stall=10 extruder: target=215 temp=214.8 pwm=0.569
Stats 5192.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4219174 bytes_read=2073441 bytes_retransmit=9 bytes_invalid=0 send_seq=115069 receive_seq=115069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.054 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=959468 sysload=1.28 cputime=277.194 memavail=1626492 print_time=5204.708 buffer_time=3.435 print_stall=10 extruder: target=215 temp=214.7 pwm=0.623
Stats 5193.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4219411 bytes_read=2073837 bytes_retransmit=9 bytes_invalid=0 send_seq=115082 receive_seq=115082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=959468 sysload=1.28 cputime=277.239 memavail=1626476 print_time=5204.708 buffer_time=2.435 print_stall=10 extruder: target=215 temp=214.8 pwm=0.545
Stats 5194.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4220207 bytes_read=2074234 bytes_retransmit=9 bytes_invalid=0 send_seq=115105 receive_seq=115104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=959724 sysload=1.28 cputime=277.292 memavail=1626496 print_time=5205.532 buffer_time=2.257 print_stall=10 extruder: target=215 temp=214.9 pwm=0.451
Stats 5195.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4220990 bytes_read=2074646 bytes_retransmit=9 bytes_invalid=0 send_seq=115129 receive_seq=115129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.8 pwm=0.887 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=960323 sysload=1.18 cputime=277.350 memavail=1626268 print_time=5206.401 buffer_time=2.125 print_stall=10 extruder: target=215 temp=214.9 pwm=0.563
Stats 5196.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4221963 bytes_read=2075097 bytes_retransmit=9 bytes_invalid=0 send_seq=115153 receive_seq=115153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=961050 sysload=1.18 cputime=277.410 memavail=1626732 print_time=5207.517 buffer_time=2.241 print_stall=10 extruder: target=215 temp=214.9 pwm=0.490
Stats 5197.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4222511 bytes_read=2075489 bytes_retransmit=9 bytes_invalid=0 send_seq=115171 receive_seq=115171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.686 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=961303 sysload=1.18 cputime=277.462 memavail=1627304 print_time=5208.291 buffer_time=2.014 print_stall=10 extruder: target=215 temp=215.0 pwm=0.437
Stats 5198.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4223474 bytes_read=2075916 bytes_retransmit=9 bytes_invalid=0 send_seq=115196 receive_seq=115196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=961935 sysload=1.18 cputime=277.527 memavail=1627164 print_time=5209.349 buffer_time=2.069 print_stall=10 extruder: target=215 temp=214.9 pwm=0.528
Stats 5199.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4224444 bytes_read=2076357 bytes_retransmit=9 bytes_invalid=0 send_seq=115221 receive_seq=115221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=962636 sysload=1.18 cputime=277.591 memavail=1626888 print_time=5210.461 buffer_time=2.180 print_stall=10 extruder: target=215 temp=214.9 pwm=0.569
Stats 5200.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4225208 bytes_read=2076759 bytes_retransmit=9 bytes_invalid=0 send_seq=115244 receive_seq=115244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.466 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=963031 sysload=1.08 cputime=277.652 memavail=1626868 print_time=5211.290 buffer_time=2.008 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 5201.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=4225813 bytes_read=2077156 bytes_retransmit=9 bytes_invalid=0 send_seq=115263 receive_seq=115263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=963313 sysload=1.08 cputime=277.708 memavail=1626916 print_time=5212.372 buffer_time=2.090 print_stall=10 extruder: target=215 temp=215.2 pwm=0.369
Stats 5202.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4226454 bytes_read=2077587 bytes_retransmit=9 bytes_invalid=0 send_seq=115283 receive_seq=115283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.590 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=963597 sysload=1.08 cputime=277.771 memavail=1626924 print_time=5213.352 buffer_time=2.068 print_stall=10 extruder: target=215 temp=215.0 pwm=0.555
Stats 5203.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4227052 bytes_read=2077964 bytes_retransmit=9 bytes_invalid=0 send_seq=115301 receive_seq=115301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.062 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=963955 sysload=1.08 cputime=277.826 memavail=1626892 print_time=5214.554 buffer_time=2.269 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 5204.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4227584 bytes_read=2078356 bytes_retransmit=9 bytes_invalid=0 send_seq=115319 receive_seq=115319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=964149 sysload=1.08 cputime=277.877 memavail=1626852 print_time=5215.310 buffer_time=2.025 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 5205.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4228255 bytes_read=2078777 bytes_retransmit=9 bytes_invalid=0 send_seq=115340 receive_seq=115340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=964443 sysload=1.00 cputime=277.915 memavail=1626924 print_time=5216.290 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.1 pwm=0.540
Stats 5206.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=4230223 bytes_read=2079269 bytes_retransmit=9 bytes_invalid=0 send_seq=115382 receive_seq=115381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.749 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=965149 sysload=1.00 cputime=277.983 memavail=1626908 print_time=5217.399 buffer_time=2.105 print_stall=10 extruder: target=215 temp=215.1 pwm=0.523
Stats 5207.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000062 bytes_write=4232200 bytes_read=2079796 bytes_retransmit=9 bytes_invalid=0 send_seq=115423 receive_seq=115423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=965652 sysload=1.00 cputime=278.051 memavail=1627148 print_time=5218.532 buffer_time=2.237 print_stall=10 extruder: target=215 temp=215.2 pwm=0.381
Stats 5208.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000062 bytes_write=4233299 bytes_read=2080252 bytes_retransmit=9 bytes_invalid=0 send_seq=115451 receive_seq=115451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=965843 sysload=1.00 cputime=278.109 memavail=1627124 print_time=5219.558 buffer_time=2.263 print_stall=10 extruder: target=215 temp=215.0 pwm=0.533
Stats 5209.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000062 bytes_write=4234477 bytes_read=2080689 bytes_retransmit=9 bytes_invalid=0 send_seq=115481 receive_seq=115481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=966098 sysload=1.00 cputime=278.165 memavail=1627180 print_time=5220.370 buffer_time=2.074 print_stall=10 extruder: target=215 temp=215.0 pwm=0.451
Stats 5210.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000062 bytes_write=4236353 bytes_read=2081186 bytes_retransmit=9 bytes_invalid=0 send_seq=115520 receive_seq=115520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.640 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=966477 sysload=1.00 cputime=278.233 memavail=1627396 print_time=5221.581 buffer_time=2.284 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 5211.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000062 bytes_write=4239390 bytes_read=2081797 bytes_retransmit=9 bytes_invalid=0 send_seq=115579 receive_seq=115579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.770 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=968027 sysload=0.92 cputime=278.319 memavail=1627164 print_time=5222.856 buffer_time=2.558 print_stall=10 extruder: target=215 temp=214.9 pwm=0.451
Stats 5212.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4241691 bytes_read=2082324 bytes_retransmit=9 bytes_invalid=0 send_seq=115625 receive_seq=115624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=969509 sysload=0.92 cputime=278.392 memavail=1627484 print_time=5223.921 buffer_time=2.622 print_stall=10 extruder: target=215 temp=214.9 pwm=0.525
Stats 5213.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4242414 bytes_read=2082741 bytes_retransmit=9 bytes_invalid=0 send_seq=115647 receive_seq=115647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.193 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=970396 sysload=0.92 cputime=278.454 memavail=1627732 print_time=5224.321 buffer_time=2.021 print_stall=10 extruder: target=215 temp=214.7 pwm=0.642
Stats 5214.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4244486 bytes_read=2083267 bytes_retransmit=9 bytes_invalid=0 send_seq=115689 receive_seq=115689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=971709 sysload=0.92 cputime=278.522 memavail=1627936 print_time=5225.382 buffer_time=2.080 print_stall=10 extruder: target=215 temp=214.9 pwm=0.466
Stats 5215.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4245988 bytes_read=2083735 bytes_retransmit=9 bytes_invalid=0 send_seq=115724 receive_seq=115723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=972579 sysload=0.92 cputime=278.598 memavail=1627708 print_time=5226.502 buffer_time=2.196 print_stall=10 extruder: target=215 temp=214.8 pwm=0.544
Stats 5216.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4247592 bytes_read=2084227 bytes_retransmit=9 bytes_invalid=0 send_seq=115761 receive_seq=115761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=973272 sysload=0.84 cputime=278.662 memavail=1627668 print_time=5227.558 buffer_time=2.252 print_stall=10 extruder: target=215 temp=214.9 pwm=0.466
Stats 5217.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4248957 bytes_read=2084728 bytes_retransmit=9 bytes_invalid=0 send_seq=115795 receive_seq=115795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=973935 sysload=0.84 cputime=278.726 memavail=1627232 print_time=5228.493 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 5218.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4250644 bytes_read=2085200 bytes_retransmit=9 bytes_invalid=0 send_seq=115832 receive_seq=115832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=974573 sysload=0.84 cputime=278.771 memavail=1627476 print_time=5229.361 buffer_time=2.053 print_stall=10 extruder: target=215 temp=214.8 pwm=0.537
Stats 5219.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4252247 bytes_read=2085692 bytes_retransmit=9 bytes_invalid=0 send_seq=115867 receive_seq=115867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=975431 sysload=0.84 cputime=278.842 memavail=1627424 print_time=5230.734 buffer_time=2.421 print_stall=10 extruder: target=215 temp=214.9 pwm=0.455
Stats 5220.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4253228 bytes_read=2086123 bytes_retransmit=9 bytes_invalid=0 send_seq=115893 receive_seq=115893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.546 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=976193 sysload=0.84 cputime=278.909 memavail=1627172 print_time=5231.410 buffer_time=2.097 print_stall=10 extruder: target=215 temp=214.7 pwm=0.548
Stats 5221.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4254138 bytes_read=2086525 bytes_retransmit=9 bytes_invalid=0 send_seq=115917 receive_seq=115916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=976717 sysload=0.93 cputime=278.969 memavail=1626652 print_time=5232.386 buffer_time=2.073 print_stall=10 extruder: target=215 temp=215.1 pwm=0.398
Stats 5222.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4256297 bytes_read=2087087 bytes_retransmit=9 bytes_invalid=0 send_seq=115962 receive_seq=115962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=977308 sysload=0.93 cputime=279.028 memavail=1626628 print_time=5233.481 buffer_time=2.167 print_stall=10 extruder: target=215 temp=214.8 pwm=0.521
Stats 5223.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4256972 bytes_read=2087483 bytes_retransmit=9 bytes_invalid=0 send_seq=115981 receive_seq=115981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=977830 sysload=0.93 cputime=279.090 memavail=1626688 print_time=5234.356 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.1 pwm=0.335
Stats 5224.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4257918 bytes_read=2087890 bytes_retransmit=9 bytes_invalid=0 send_seq=116005 receive_seq=116005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=978648 sysload=0.93 cputime=279.158 memavail=1627184 print_time=5235.429 buffer_time=2.110 print_stall=10 extruder: target=215 temp=215.1 pwm=0.406
Stats 5225.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4258573 bytes_read=2088302 bytes_retransmit=9 bytes_invalid=0 send_seq=116024 receive_seq=116024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=979138 sysload=0.93 cputime=279.221 memavail=1627144 print_time=5236.564 buffer_time=2.244 print_stall=10 extruder: target=215 temp=215.1 pwm=0.489
Stats 5226.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4259342 bytes_read=2088708 bytes_retransmit=9 bytes_invalid=0 send_seq=116046 receive_seq=116045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=979565 sysload=0.86 cputime=279.285 memavail=1627172 print_time=5237.408 buffer_time=2.087 print_stall=10 extruder: target=215 temp=215.0 pwm=0.489
Stats 5227.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4260192 bytes_read=2089130 bytes_retransmit=9 bytes_invalid=0 send_seq=116069 receive_seq=116069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=980287 sysload=0.86 cputime=279.347 memavail=1627028 print_time=5238.512 buffer_time=2.190 print_stall=10 extruder: target=215 temp=214.8 pwm=0.625
Stats 5228.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4260949 bytes_read=2089552 bytes_retransmit=9 bytes_invalid=0 send_seq=116090 receive_seq=116090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.685 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=980868 sysload=0.86 cputime=279.385 memavail=1627256 print_time=5239.328 buffer_time=2.004 print_stall=10 extruder: target=215 temp=214.6 pwm=0.678
Stats 5229.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4262034 bytes_read=2089998 bytes_retransmit=9 bytes_invalid=0 send_seq=116120 receive_seq=116119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=981579 sysload=0.86 cputime=279.449 memavail=1627048 print_time=5240.391 buffer_time=2.067 print_stall=10 extruder: target=215 temp=214.7 pwm=0.580
Stats 5230.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4263270 bytes_read=2090445 bytes_retransmit=9 bytes_invalid=0 send_seq=116151 receive_seq=116151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=982012 sysload=0.86 cputime=279.511 memavail=1627020 print_time=5242.261 buffer_time=2.933 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
Stats 5231.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4263663 bytes_read=2090842 bytes_retransmit=9 bytes_invalid=0 send_seq=116167 receive_seq=116167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.8 sd_pos=982241 sysload=0.79 cputime=279.559 memavail=1626852 print_time=5242.788 buffer_time=2.460 print_stall=10 extruder: target=215 temp=214.8 pwm=0.538
Stats 5232.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4264485 bytes_read=2091258 bytes_retransmit=9 bytes_invalid=0 send_seq=116190 receive_seq=116190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.185 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=982787 sysload=0.79 cputime=279.596 memavail=1626852 print_time=5244.932 buffer_time=3.605 print_stall=10 extruder: target=215 temp=214.9 pwm=0.448
Stats 5233.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4264743 bytes_read=2091635 bytes_retransmit=9 bytes_invalid=0 send_seq=116205 receive_seq=116205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=982787 sysload=0.79 cputime=279.627 memavail=1626868 print_time=5244.932 buffer_time=2.600 print_stall=10 extruder: target=215 temp=214.7 pwm=0.615
Stats 5234.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4265438 bytes_read=2092052 bytes_retransmit=9 bytes_invalid=0 send_seq=116225 receive_seq=116225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=68 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.093 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=983042 sysload=0.79 cputime=279.684 memavail=1627072 print_time=5245.738 buffer_time=2.405 print_stall=10 extruder: target=215 temp=214.8 pwm=0.541
Stats 5235.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4266111 bytes_read=2092463 bytes_retransmit=9 bytes_invalid=0 send_seq=116247 receive_seq=116247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=983389 sysload=0.79 cputime=279.740 memavail=1627344 print_time=5246.334 buffer_time=2.002 print_stall=10 extruder: target=215 temp=214.7 pwm=0.588
Stats 5236.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4267497 bytes_read=2092895 bytes_retransmit=9 bytes_invalid=0 send_seq=116277 receive_seq=116276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.200 rpi: temp=57.9 mcu_temp: temp=40.3 sd_pos=984367 sysload=0.73 cputime=279.784 memavail=1627320 print_time=5247.722 buffer_time=2.384 print_stall=10 extruder: target=215 temp=214.8 pwm=0.481
Stats 5237.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4268030 bytes_read=2093317 bytes_retransmit=9 bytes_invalid=0 send_seq=116294 receive_seq=116294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=984620 sysload=0.73 cputime=279.837 memavail=1627352 print_time=5248.496 buffer_time=2.158 print_stall=10 extruder: target=215 temp=214.8 pwm=0.481
Stats 5238.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4269004 bytes_read=2093738 bytes_retransmit=9 bytes_invalid=0 send_seq=116319 receive_seq=116318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.090 rpi: temp=57.5 mcu_temp: temp=40.4 sd_pos=985251 sysload=0.73 cputime=279.878 memavail=1627428 print_time=5249.554 buffer_time=2.213 print_stall=10 extruder: target=215 temp=214.9 pwm=0.421
Stats 5239.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4269725 bytes_read=2094145 bytes_retransmit=9 bytes_invalid=0 send_seq=116342 receive_seq=116342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=57.5 mcu_temp: temp=40.2 sd_pos=985792 sysload=0.73 cputime=279.942 memavail=1627184 print_time=5250.409 buffer_time=2.068 print_stall=10 extruder: target=215 temp=214.9 pwm=0.502
Stats 5240.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4270923 bytes_read=2094590 bytes_retransmit=9 bytes_invalid=0 send_seq=116370 receive_seq=116370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.464 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=986381 sysload=0.73 cputime=280.004 memavail=1627080 print_time=5251.615 buffer_time=2.273 print_stall=10 extruder: target=215 temp=214.9 pwm=0.509
Stats 5241.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=4271485 bytes_read=2094970 bytes_retransmit=9 bytes_invalid=0 send_seq=116388 receive_seq=116388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=40.6 sd_pos=986665 sysload=0.67 cputime=280.068 memavail=1626772 print_time=5252.674 buffer_time=2.329 print_stall=10 extruder: target=215 temp=214.9 pwm=0.548
Stats 5242.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4272149 bytes_read=2095362 bytes_retransmit=9 bytes_invalid=0 send_seq=116408 receive_seq=116408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.108 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=986952 sysload=0.67 cputime=280.126 memavail=1626584 print_time=5253.646 buffer_time=2.300 print_stall=10 extruder: target=215 temp=215.0 pwm=0.448
Stats 5243.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4272626 bytes_read=2095757 bytes_retransmit=9 bytes_invalid=0 send_seq=116425 receive_seq=116425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.534 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=987212 sysload=0.67 cputime=280.181 memavail=1626516 print_time=5254.529 buffer_time=2.183 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 5244.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4273286 bytes_read=2096158 bytes_retransmit=9 bytes_invalid=0 send_seq=116445 receive_seq=116445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.494 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=987504 sysload=0.67 cputime=280.244 memavail=1626304 print_time=5255.589 buffer_time=2.239 print_stall=10 extruder: target=215 temp=214.9 pwm=0.569
Stats 5245.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4273966 bytes_read=2096540 bytes_retransmit=9 bytes_invalid=0 send_seq=116465 receive_seq=116464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.277 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=987800 sysload=0.67 cputime=280.302 memavail=1626364 print_time=5256.560 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.1 pwm=0.485
Stats 5246.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4275121 bytes_read=2097007 bytes_retransmit=9 bytes_invalid=0 send_seq=116495 receive_seq=116494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=988713 sysload=0.61 cputime=280.370 memavail=1626612 print_time=5257.428 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.1 pwm=0.485
Stats 5247.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4277099 bytes_read=2097548 bytes_retransmit=9 bytes_invalid=0 send_seq=116539 receive_seq=116539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=990369 sysload=0.61 cputime=280.445 memavail=1626844 print_time=5258.413 buffer_time=2.061 print_stall=10 extruder: target=215 temp=215.0 pwm=0.532
Stats 5248.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4279585 bytes_read=2098090 bytes_retransmit=9 bytes_invalid=0 send_seq=116590 receive_seq=116590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.193 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=991820 sysload=0.61 cputime=280.489 memavail=1627124 print_time=5259.532 buffer_time=2.177 print_stall=10 extruder: target=215 temp=215.0 pwm=0.540
Stats 5249.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4281623 bytes_read=2098622 bytes_retransmit=9 bytes_invalid=0 send_seq=116633 receive_seq=116633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=992242 sysload=0.61 cputime=280.551 memavail=1627440 print_time=5260.411 buffer_time=2.056 print_stall=10 extruder: target=215 temp=214.8 pwm=0.649
Stats 5250.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4282981 bytes_read=2099078 bytes_retransmit=9 bytes_invalid=0 send_seq=116664 receive_seq=116664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=992525 sysload=0.61 cputime=280.610 memavail=1627936 print_time=5261.467 buffer_time=2.110 print_stall=10 extruder: target=215 temp=214.8 pwm=0.588
Stats 5251.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4284207 bytes_read=2099505 bytes_retransmit=9 bytes_invalid=0 send_seq=116693 receive_seq=116692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=992745 sysload=0.57 cputime=280.669 memavail=1627952 print_time=5262.546 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.8 pwm=0.550
Stats 5252.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4285820 bytes_read=2100022 bytes_retransmit=9 bytes_invalid=0 send_seq=116729 receive_seq=116729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=993093 sysload=0.57 cputime=280.728 memavail=1627928 print_time=5263.756 buffer_time=2.397 print_stall=10 extruder: target=215 temp=214.7 pwm=0.563
Stats 5253.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4287969 bytes_read=2100543 bytes_retransmit=9 bytes_invalid=0 send_seq=116773 receive_seq=116773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=994003 sysload=0.57 cputime=280.795 memavail=1628196 print_time=5264.677 buffer_time=2.316 print_stall=10 extruder: target=215 temp=214.8 pwm=0.494
Stats 5254.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4291121 bytes_read=2101145 bytes_retransmit=9 bytes_invalid=0 send_seq=116836 receive_seq=116836 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.643 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=995443 sysload=0.57 cputime=280.871 memavail=1628196 print_time=5266.131 buffer_time=2.769 print_stall=10 extruder: target=215 temp=214.8 pwm=0.515
Stats 5255.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4291877 bytes_read=2101567 bytes_retransmit=9 bytes_invalid=0 send_seq=116857 receive_seq=116857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=995711 sysload=0.57 cputime=280.922 memavail=1628164 print_time=5266.523 buffer_time=2.160 print_stall=10 extruder: target=215 temp=215.0 pwm=0.457
Stats 5256.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4292819 bytes_read=2101988 bytes_retransmit=9 bytes_invalid=0 send_seq=116881 receive_seq=116881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.450 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=996363 sysload=0.52 cputime=280.962 memavail=1628192 print_time=5267.421 buffer_time=2.055 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
Stats 5257.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4295137 bytes_read=2102525 bytes_retransmit=9 bytes_invalid=0 send_seq=116928 receive_seq=116928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=997203 sysload=0.52 cputime=281.025 memavail=1627436 print_time=5268.746 buffer_time=2.379 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 5258.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4296115 bytes_read=2102977 bytes_retransmit=9 bytes_invalid=0 send_seq=116955 receive_seq=116955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.082 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=997788 sysload=0.52 cputime=281.082 memavail=1627416 print_time=5269.547 buffer_time=2.180 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 5259.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4298173 bytes_read=2103498 bytes_retransmit=9 bytes_invalid=0 send_seq=116999 receive_seq=116999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.380 rpi: temp=57.5 mcu_temp: temp=40.9 sd_pos=998445 sysload=0.52 cputime=281.124 memavail=1626916 print_time=5270.612 buffer_time=2.240 print_stall=10 extruder: target=215 temp=215.1 pwm=0.491
Stats 5260.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4299486 bytes_read=2103930 bytes_retransmit=9 bytes_invalid=0 send_seq=117029 receive_seq=117028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.231 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=999334 sysload=0.52 cputime=281.197 memavail=1627452 print_time=5271.745 buffer_time=2.372 print_stall=10 extruder: target=215 temp=215.1 pwm=0.494
Stats 5261.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4300750 bytes_read=2104416 bytes_retransmit=9 bytes_invalid=0 send_seq=117060 receive_seq=117059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.131 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=999943 sysload=0.48 cputime=281.257 memavail=1627428 print_time=5272.489 buffer_time=2.115 print_stall=10 extruder: target=215 temp=215.2 pwm=0.484
Stats 5262.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4301861 bytes_read=2104853 bytes_retransmit=9 bytes_invalid=0 send_seq=117086 receive_seq=117086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1000859 sysload=0.48 cputime=281.320 memavail=1627208 print_time=5273.869 buffer_time=2.494 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 5263.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4303269 bytes_read=2105295 bytes_retransmit=9 bytes_invalid=0 send_seq=117118 receive_seq=117117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.358 rpi: temp=57.5 mcu_temp: temp=40.5 sd_pos=1001185 sysload=0.48 cputime=281.354 memavail=1627168 print_time=5274.517 buffer_time=2.141 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 5264.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4304654 bytes_read=2105801 bytes_retransmit=9 bytes_invalid=0 send_seq=117152 receive_seq=117152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.454 rpi: temp=57.5 mcu_temp: temp=40.5 sd_pos=1001732 sysload=0.48 cputime=281.412 memavail=1627176 print_time=5275.502 buffer_time=2.126 print_stall=10 extruder: target=215 temp=215.0 pwm=0.561
Stats 5265.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4305185 bytes_read=2106183 bytes_retransmit=9 bytes_invalid=0 send_seq=117171 receive_seq=117171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.292 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1002388 sysload=0.48 cputime=281.450 memavail=1627004 print_time=5276.400 buffer_time=2.023 print_stall=10 extruder: target=215 temp=215.0 pwm=0.538
Stats 5266.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4306258 bytes_read=2106620 bytes_retransmit=9 bytes_invalid=0 send_seq=117198 receive_seq=117198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=57.5 mcu_temp: temp=40.6 sd_pos=1003171 sysload=0.44 cputime=281.489 memavail=1627224 print_time=5277.641 buffer_time=2.264 print_stall=10 extruder: target=215 temp=215.0 pwm=0.545
Stats 5267.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4307245 bytes_read=2107056 bytes_retransmit=9 bytes_invalid=0 send_seq=117223 receive_seq=117222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.410 rpi: temp=57.5 mcu_temp: temp=40.7 sd_pos=1003566 sysload=0.44 cputime=281.528 memavail=1627244 print_time=5278.614 buffer_time=2.235 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 5268.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=4307931 bytes_read=2107458 bytes_retransmit=9 bytes_invalid=0 send_seq=117242 receive_seq=117242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=57.5 mcu_temp: temp=40.8 sd_pos=1004056 sysload=0.44 cputime=281.566 memavail=1627220 print_time=5279.406 buffer_time=2.022 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 5269.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=4308853 bytes_read=2107880 bytes_retransmit=9 bytes_invalid=0 send_seq=117266 receive_seq=117266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.409 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=1004872 sysload=0.44 cputime=281.631 memavail=1627252 print_time=5280.442 buffer_time=2.057 print_stall=10 extruder: target=215 temp=215.1 pwm=0.468
Stats 5270.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=4309470 bytes_read=2108296 bytes_retransmit=9 bytes_invalid=0 send_seq=117286 receive_seq=117286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.371 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1005358 sysload=0.44 cputime=281.688 memavail=1627244 print_time=5281.441 buffer_time=2.056 print_stall=10 extruder: target=215 temp=215.0 pwm=0.544
Stats 5271.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=4311140 bytes_read=2108773 bytes_retransmit=9 bytes_invalid=0 send_seq=117324 receive_seq=117324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.247 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1006145 sysload=0.40 cputime=281.758 memavail=1627244 print_time=5282.549 buffer_time=2.158 print_stall=10 extruder: target=215 temp=214.8 pwm=0.665
Stats 5272.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4311530 bytes_read=2109180 bytes_retransmit=9 bytes_invalid=0 send_seq=117342 receive_seq=117342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.8 pwm=0.839 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1006210 sysload=0.40 cputime=281.815 memavail=1627268 print_time=5283.829 buffer_time=2.435 print_stall=10 extruder: target=215 temp=214.9 pwm=0.490
Stats 5273.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4312190 bytes_read=2109622 bytes_retransmit=9 bytes_invalid=0 send_seq=117365 receive_seq=117365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1006629 sysload=0.40 cputime=281.876 memavail=1627500 print_time=5284.696 buffer_time=2.301 print_stall=10 extruder: target=215 temp=214.8 pwm=0.577
Stats 5274.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4313351 bytes_read=2110054 bytes_retransmit=9 bytes_invalid=0 send_seq=117394 receive_seq=117394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1006967 sysload=0.40 cputime=281.937 memavail=1627244 print_time=5286.670 buffer_time=3.274 print_stall=10 extruder: target=215 temp=214.7 pwm=0.572
Stats 5275.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4313591 bytes_read=2110431 bytes_retransmit=9 bytes_invalid=0 send_seq=117409 receive_seq=117409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.629 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1006967 sysload=0.40 cputime=281.989 memavail=1627216 print_time=5286.670 buffer_time=2.273 print_stall=10 extruder: target=215 temp=214.7 pwm=0.596
Stats 5276.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4314765 bytes_read=2110892 bytes_retransmit=9 bytes_invalid=0 send_seq=117438 receive_seq=117438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.365 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1007505 sysload=0.37 cputime=282.056 memavail=1626688 print_time=5287.394 buffer_time=1.994 print_stall=10 extruder: target=215 temp=214.8 pwm=0.498
Stats 5277.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=4315733 bytes_read=2111319 bytes_retransmit=9 bytes_invalid=0 send_seq=117463 receive_seq=117463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.529 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1008232 sysload=0.37 cputime=282.122 memavail=1626428 print_time=5288.510 buffer_time=2.109 print_stall=10 extruder: target=215 temp=214.7 pwm=0.553
Stats 5278.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=4316533 bytes_read=2111726 bytes_retransmit=9 bytes_invalid=0 send_seq=117485 receive_seq=117484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1008708 sysload=0.37 cputime=282.180 memavail=1626468 print_time=5289.456 buffer_time=2.052 print_stall=10 extruder: target=215 temp=214.9 pwm=0.452
Stats 5279.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=4317380 bytes_read=2112162 bytes_retransmit=9 bytes_invalid=0 send_seq=117508 receive_seq=117508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.534 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1009276 sysload=0.37 cputime=282.244 memavail=1626668 print_time=5290.630 buffer_time=2.226 print_stall=10 extruder: target=215 temp=214.9 pwm=0.492
Stats 5280.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=4318168 bytes_read=2112554 bytes_retransmit=9 bytes_invalid=0 send_seq=117529 receive_seq=117529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=1009815 sysload=0.37 cputime=282.305 memavail=1626964 print_time=5291.455 buffer_time=2.050 print_stall=10 extruder: target=215 temp=215.0 pwm=0.441
Stats 5281.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=4318844 bytes_read=2112961 bytes_retransmit=9 bytes_invalid=0 send_seq=117550 receive_seq=117550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.306 rpi: temp=57.5 mcu_temp: temp=40.9 sd_pos=1010197 sysload=0.34 cputime=282.361 memavail=1627216 print_time=5292.462 buffer_time=2.057 print_stall=10 extruder: target=215 temp=215.1 pwm=0.462
Stats 5282.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4320373 bytes_read=2113457 bytes_retransmit=9 bytes_invalid=0 send_seq=117584 receive_seq=117583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1010630 sysload=0.34 cputime=282.421 memavail=1626956 print_time=5293.607 buffer_time=2.201 print_stall=10 extruder: target=215 temp=215.1 pwm=0.462
Stats 5283.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4320901 bytes_read=2113844 bytes_retransmit=9 bytes_invalid=0 send_seq=117603 receive_seq=117603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1010884 sysload=0.34 cputime=282.473 memavail=1627204 print_time=5294.570 buffer_time=2.164 print_stall=10 extruder: target=215 temp=215.2 pwm=0.415
Stats 5284.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4321561 bytes_read=2114251 bytes_retransmit=9 bytes_invalid=0 send_seq=117622 receive_seq=117621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1011165 sysload=0.34 cputime=282.510 memavail=1627204 print_time=5295.650 buffer_time=2.240 print_stall=10 extruder: target=215 temp=215.4 pwm=0.380
Stats 5285.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4322050 bytes_read=2114652 bytes_retransmit=9 bytes_invalid=0 send_seq=117641 receive_seq=117641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1011418 sysload=0.34 cputime=282.566 memavail=1626936 print_time=5296.498 buffer_time=2.087 print_stall=10 extruder: target=215 temp=215.3 pwm=0.475
Stats 5286.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4322626 bytes_read=2115024 bytes_retransmit=9 bytes_invalid=0 send_seq=117659 receive_seq=117658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1011712 sysload=0.31 cputime=282.624 memavail=1627208 print_time=5297.462 buffer_time=2.049 print_stall=10 extruder: target=215 temp=215.5 pwm=0.344
Stats 5287.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=4323204 bytes_read=2115456 bytes_retransmit=9 bytes_invalid=0 send_seq=117678 receive_seq=117678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.661 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1012003 sysload=0.31 cputime=282.678 memavail=1627204 print_time=5298.541 buffer_time=2.128 print_stall=10 extruder: target=215 temp=215.3 pwm=0.480
Stats 5288.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=4324548 bytes_read=2115917 bytes_retransmit=9 bytes_invalid=0 send_seq=117710 receive_seq=117710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.540 rpi: temp=57.0 mcu_temp: temp=40.8 sd_pos=1013008 sysload=0.31 cputime=282.718 memavail=1627152 print_time=5299.737 buffer_time=2.323 print_stall=10 extruder: target=215 temp=215.2 pwm=0.558
Stats 5289.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=4326697 bytes_read=2116434 bytes_retransmit=9 bytes_invalid=0 send_seq=117756 receive_seq=117756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=1014713 sysload=0.31 cputime=282.771 memavail=1627128 print_time=5300.749 buffer_time=2.334 print_stall=10 extruder: target=215 temp=215.3 pwm=0.517
Stats 5290.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=4329086 bytes_read=2116991 bytes_retransmit=9 bytes_invalid=0 send_seq=117804 receive_seq=117804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1016215 sysload=0.31 cputime=282.845 memavail=1627396 print_time=5301.815 buffer_time=2.399 print_stall=10 extruder: target=215 temp=215.2 pwm=0.517
Stats 5291.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=4331129 bytes_read=2117507 bytes_retransmit=9 bytes_invalid=0 send_seq=117847 receive_seq=117847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.716 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1016664 sysload=0.29 cputime=282.906 memavail=1627400 print_time=5302.665 buffer_time=2.246 print_stall=10 extruder: target=215 temp=215.1 pwm=0.517
Stats 5292.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4332588 bytes_read=2117964 bytes_retransmit=9 bytes_invalid=0 send_seq=117879 receive_seq=117878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.608 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1016982 sysload=0.29 cputime=282.963 memavail=1627648 print_time=5303.717 buffer_time=2.298 print_stall=10 extruder: target=215 temp=215.1 pwm=0.517
Stats 5293.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4333450 bytes_read=2118401 bytes_retransmit=9 bytes_invalid=0 send_seq=117903 receive_seq=117902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1017110 sysload=0.29 cputime=283.020 memavail=1627396 print_time=5304.429 buffer_time=2.008 print_stall=10 extruder: target=215 temp=215.0 pwm=0.569
Stats 5294.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4334860 bytes_read=2118872 bytes_retransmit=9 bytes_invalid=0 send_seq=117936 receive_seq=117936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1017459 sysload=0.29 cputime=283.076 memavail=1627404 print_time=5305.565 buffer_time=2.144 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 5295.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4336395 bytes_read=2119329 bytes_retransmit=9 bytes_invalid=0 send_seq=117970 receive_seq=117970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1017744 sysload=0.29 cputime=283.110 memavail=1627128 print_time=5306.452 buffer_time=2.029 print_stall=10 extruder: target=215 temp=215.1 pwm=0.385
Stats 5296.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4339791 bytes_read=2119971 bytes_retransmit=9 bytes_invalid=0 send_seq=118035 receive_seq=118035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.702 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1019730 sysload=0.27 cputime=283.192 memavail=1627168 print_time=5307.927 buffer_time=2.503 print_stall=10 extruder: target=215 temp=215.0 pwm=0.468
Stats 5297.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4340860 bytes_read=2120422 bytes_retransmit=9 bytes_invalid=0 send_seq=118062 receive_seq=118062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.637 rpi: temp=56.5 mcu_temp: temp=40.1 sd_pos=1020034 sysload=0.27 cputime=283.246 memavail=1627128 print_time=5308.452 buffer_time=2.028 print_stall=10 extruder: target=215 temp=214.9 pwm=0.520
Stats 5298.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4342688 bytes_read=2120899 bytes_retransmit=9 bytes_invalid=0 send_seq=118101 receive_seq=118100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.416 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1020993 sysload=0.27 cputime=283.312 memavail=1626860 print_time=5309.877 buffer_time=2.449 print_stall=10 extruder: target=215 temp=215.0 pwm=0.477
Stats 5299.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4344102 bytes_read=2121385 bytes_retransmit=9 bytes_invalid=0 send_seq=118135 receive_seq=118135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1021421 sysload=0.27 cputime=283.371 memavail=1626648 print_time=5310.637 buffer_time=2.209 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 5300.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4345237 bytes_read=2121809 bytes_retransmit=9 bytes_invalid=0 send_seq=118163 receive_seq=118162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.097 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=1022027 sysload=0.27 cputime=283.433 memavail=1626880 print_time=5311.700 buffer_time=2.269 print_stall=10 extruder: target=215 temp=215.1 pwm=0.425
Stats 5301.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4347037 bytes_read=2122276 bytes_retransmit=9 bytes_invalid=0 send_seq=118201 receive_seq=118200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.427 rpi: temp=57.5 mcu_temp: temp=40.2 sd_pos=1022802 sysload=0.24 cputime=283.504 memavail=1626872 print_time=5312.581 buffer_time=2.147 print_stall=10 extruder: target=215 temp=215.2 pwm=0.382
Stats 5302.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4348300 bytes_read=2122756 bytes_retransmit=9 bytes_invalid=0 send_seq=118232 receive_seq=118232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=1023491 sysload=0.24 cputime=283.569 memavail=1627136 print_time=5313.616 buffer_time=2.181 print_stall=10 extruder: target=215 temp=215.1 pwm=0.516
Stats 5303.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4349372 bytes_read=2123191 bytes_retransmit=9 bytes_invalid=0 send_seq=118259 receive_seq=118259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1024208 sysload=0.24 cputime=283.636 memavail=1627612 print_time=5314.489 buffer_time=2.054 print_stall=10 extruder: target=215 temp=215.3 pwm=0.446
Stats 5304.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4350975 bytes_read=2123658 bytes_retransmit=9 bytes_invalid=0 send_seq=118296 receive_seq=118295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1024692 sysload=0.24 cputime=283.699 memavail=1627876 print_time=5315.725 buffer_time=2.287 print_stall=10 extruder: target=215 temp=215.2 pwm=0.445
Stats 5305.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4352196 bytes_read=2124130 bytes_retransmit=9 bytes_invalid=0 send_seq=118326 receive_seq=118326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1025196 sysload=0.24 cputime=283.757 memavail=1626000 print_time=5316.669 buffer_time=2.231 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 5306.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4352711 bytes_read=2124526 bytes_retransmit=9 bytes_invalid=0 send_seq=118345 receive_seq=118345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1025790 sysload=0.22 cputime=283.802 memavail=1626124 print_time=5317.567 buffer_time=2.129 print_stall=10 extruder: target=215 temp=215.0 pwm=0.576
Stats 5307.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4353848 bytes_read=2124973 bytes_retransmit=9 bytes_invalid=0 send_seq=118374 receive_seq=118374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1026503 sysload=0.22 cputime=283.862 memavail=1626624 print_time=5318.809 buffer_time=2.371 print_stall=10 extruder: target=215 temp=215.0 pwm=0.566
Stats 5308.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4354376 bytes_read=2125385 bytes_retransmit=9 bytes_invalid=0 send_seq=118393 receive_seq=118393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1026743 sysload=0.22 cputime=283.897 memavail=1626416 print_time=5319.498 buffer_time=2.058 print_stall=10 extruder: target=215 temp=215.0 pwm=0.562
Stats 5309.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4355282 bytes_read=2125806 bytes_retransmit=9 bytes_invalid=0 send_seq=118417 receive_seq=118417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1027310 sysload=0.22 cputime=283.958 memavail=1626656 print_time=5320.572 buffer_time=2.132 print_stall=10 extruder: target=215 temp=214.9 pwm=0.555
Stats 5310.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4356095 bytes_read=2126208 bytes_retransmit=9 bytes_invalid=0 send_seq=118440 receive_seq=118440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.4 sd_pos=1027901 sysload=0.22 cputime=284.015 memavail=1626664 print_time=5321.469 buffer_time=2.028 print_stall=10 extruder: target=215 temp=215.1 pwm=0.389
Stats 5311.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4356860 bytes_read=2126640 bytes_retransmit=9 bytes_invalid=0 send_seq=118463 receive_seq=118463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.509 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1028491 sysload=0.21 cputime=284.052 memavail=1626212 print_time=5322.608 buffer_time=2.166 print_stall=10 extruder: target=215 temp=214.9 pwm=0.516
Stats 5312.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4358378 bytes_read=2127131 bytes_retransmit=9 bytes_invalid=0 send_seq=118498 receive_seq=118498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.027 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1029090 sysload=0.21 cputime=284.098 memavail=1626540 print_time=5323.453 buffer_time=2.009 print_stall=10 extruder: target=215 temp=214.8 pwm=0.569
Stats 5313.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4358875 bytes_read=2127508 bytes_retransmit=9 bytes_invalid=0 send_seq=118516 receive_seq=118516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1029209 sysload=0.21 cputime=284.147 memavail=1626520 print_time=5324.971 buffer_time=2.526 print_stall=10 extruder: target=215 temp=214.8 pwm=0.493
Stats 5314.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4359310 bytes_read=2127915 bytes_retransmit=9 bytes_invalid=0 send_seq=118534 receive_seq=118534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1029500 sysload=0.21 cputime=284.201 memavail=1626536 print_time=5325.503 buffer_time=2.054 print_stall=10 extruder: target=215 temp=214.8 pwm=0.545
Stats 5315.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4360546 bytes_read=2128361 bytes_retransmit=9 bytes_invalid=0 send_seq=118563 receive_seq=118563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=1029928 sysload=0.21 cputime=284.263 memavail=1626504 print_time=5327.791 buffer_time=3.342 print_stall=10 extruder: target=215 temp=214.7 pwm=0.545
Stats 5316.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4360745 bytes_read=2128713 bytes_retransmit=9 bytes_invalid=0 send_seq=118576 receive_seq=118576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=56.5 mcu_temp: temp=40.1 sd_pos=1029928 sysload=0.19 cputime=284.306 memavail=1626252 print_time=5327.791 buffer_time=2.341 print_stall=10 extruder: target=215 temp=214.7 pwm=0.545
Stats 5317.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000035 bytes_write=4361931 bytes_read=2129200 bytes_retransmit=9 bytes_invalid=0 send_seq=118607 receive_seq=118607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1030425 sysload=0.19 cputime=284.351 memavail=1626520 print_time=5328.515 buffer_time=2.063 print_stall=10 extruder: target=215 temp=214.5 pwm=0.618
Stats 5318.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000035 bytes_write=4362874 bytes_read=2129616 bytes_retransmit=9 bytes_invalid=0 send_seq=118630 receive_seq=118630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1031086 sysload=0.19 cputime=284.413 memavail=1627020 print_time=5329.631 buffer_time=2.178 print_stall=10 extruder: target=215 temp=214.7 pwm=0.521
Stats 5319.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000035 bytes_write=4363673 bytes_read=2130013 bytes_retransmit=9 bytes_invalid=0 send_seq=118653 receive_seq=118652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=57.5 mcu_temp: temp=40.0 sd_pos=1031516 sysload=0.19 cputime=284.469 memavail=1626740 print_time=5330.576 buffer_time=2.122 print_stall=10 extruder: target=215 temp=214.7 pwm=0.509
Stats 5320.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000035 bytes_write=4364369 bytes_read=2130435 bytes_retransmit=9 bytes_invalid=0 send_seq=118673 receive_seq=118673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.083 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1031881 sysload=0.19 cputime=284.528 memavail=1625400 print_time=5331.463 buffer_time=2.008 print_stall=10 extruder: target=215 temp=214.7 pwm=0.509
Stats 5321.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000035 bytes_write=4365342 bytes_read=2130861 bytes_retransmit=9 bytes_invalid=0 send_seq=118698 receive_seq=118698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.578 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=1032514 sysload=0.25 cputime=284.574 memavail=1625644 print_time=5332.576 buffer_time=2.120 print_stall=10 extruder: target=215 temp=214.8 pwm=0.483
Stats 5322.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4365996 bytes_read=2131268 bytes_retransmit=9 bytes_invalid=0 send_seq=118719 receive_seq=118719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1032861 sysload=0.25 cputime=284.628 memavail=1625612 print_time=5333.582 buffer_time=2.125 print_stall=10 extruder: target=215 temp=214.8 pwm=0.533
Stats 5323.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4367498 bytes_read=2131760 bytes_retransmit=9 bytes_invalid=0 send_seq=118754 receive_seq=118754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1033253 sysload=0.25 cputime=284.691 memavail=1626164 print_time=5334.666 buffer_time=2.207 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 5324.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4368131 bytes_read=2132156 bytes_retransmit=9 bytes_invalid=0 send_seq=118773 receive_seq=118773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1033425 sysload=0.25 cputime=284.744 memavail=1626372 print_time=5335.622 buffer_time=2.163 print_stall=10 extruder: target=215 temp=215.1 pwm=0.443
Stats 5325.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4368660 bytes_read=2132538 bytes_retransmit=9 bytes_invalid=0 send_seq=118792 receive_seq=118792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=57.9 mcu_temp: temp=40.4 sd_pos=1033593 sysload=0.25 cputime=284.781 memavail=1626444 print_time=5336.578 buffer_time=2.117 print_stall=10 extruder: target=215 temp=215.1 pwm=0.422
Stats 5326.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4369224 bytes_read=2132945 bytes_retransmit=9 bytes_invalid=0 send_seq=118810 receive_seq=118810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.543 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1033764 sysload=0.23 cputime=284.834 memavail=1626452 print_time=5337.534 buffer_time=2.072 print_stall=10 extruder: target=215 temp=215.2 pwm=0.422
Stats 5327.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4369790 bytes_read=2133351 bytes_retransmit=9 bytes_invalid=0 send_seq=118828 receive_seq=118828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.389 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1033943 sysload=0.23 cputime=284.885 memavail=1626700 print_time=5338.490 buffer_time=2.028 print_stall=10 extruder: target=215 temp=215.2 pwm=0.430
Stats 5328.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4370543 bytes_read=2133738 bytes_retransmit=9 bytes_invalid=0 send_seq=118849 receive_seq=118848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.166 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1034176 sysload=0.23 cputime=284.940 memavail=1626436 print_time=5339.765 buffer_time=2.301 print_stall=10 extruder: target=215 temp=215.2 pwm=0.465
Stats 5329.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4371780 bytes_read=2134220 bytes_retransmit=9 bytes_invalid=0 send_seq=118881 receive_seq=118881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.616 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1034948 sysload=0.23 cputime=285.004 memavail=1626672 print_time=5340.779 buffer_time=2.314 print_stall=10 extruder: target=215 temp=215.2 pwm=0.396
Stats 5330.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4374102 bytes_read=2134761 bytes_retransmit=9 bytes_invalid=0 send_seq=118929 receive_seq=118929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=57.5 mcu_temp: temp=40.2 sd_pos=1036611 sysload=0.23 cputime=285.074 memavail=1626704 print_time=5341.832 buffer_time=2.366 print_stall=10 extruder: target=215 temp=215.0 pwm=0.632
Stats 5331.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=4376557 bytes_read=2135303 bytes_retransmit=9 bytes_invalid=0 send_seq=118980 receive_seq=118980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.466 rpi: temp=57.5 mcu_temp: temp=40.5 sd_pos=1037849 sysload=0.21 cputime=285.126 memavail=1626456 print_time=5342.895 buffer_time=2.427 print_stall=10 extruder: target=215 temp=214.9 pwm=0.667
Stats 5332.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4377946 bytes_read=2135830 bytes_retransmit=9 bytes_invalid=0 send_seq=119014 receive_seq=119014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=11 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1038136 sysload=0.21 cputime=285.181 memavail=1626456 print_time=5343.511 buffer_time=2.043 print_stall=10 extruder: target=215 temp=214.9 pwm=0.554
Stats 5333.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4379380 bytes_read=2136287 bytes_retransmit=9 bytes_invalid=0 send_seq=119048 receive_seq=119048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1038395 sysload=0.21 cputime=285.220 memavail=1626444 print_time=5344.696 buffer_time=2.226 print_stall=10 extruder: target=215 temp=214.7 pwm=0.597
Stats 5334.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4380810 bytes_read=2136734 bytes_retransmit=9 bytes_invalid=0 send_seq=119080 receive_seq=119080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=57.5 mcu_temp: temp=40.3 sd_pos=1038678 sysload=0.21 cputime=285.277 memavail=1626700 print_time=5345.881 buffer_time=2.410 print_stall=10 extruder: target=215 temp=215.0 pwm=0.426
Stats 5335.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4381909 bytes_read=2137200 bytes_retransmit=9 bytes_invalid=0 send_seq=119107 receive_seq=119107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1038850 sysload=0.21 cputime=285.329 memavail=1626696 print_time=5346.645 buffer_time=2.173 print_stall=10 extruder: target=215 temp=214.8 pwm=0.579
Stats 5336.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4384030 bytes_read=2137707 bytes_retransmit=9 bytes_invalid=0 send_seq=119151 receive_seq=119151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1039703 sysload=0.20 cputime=285.394 memavail=1626704 print_time=5347.565 buffer_time=2.092 print_stall=10 extruder: target=215 temp=214.8 pwm=0.493
Stats 5337.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4386243 bytes_read=2138239 bytes_retransmit=9 bytes_invalid=0 send_seq=119197 receive_seq=119197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=1041291 sysload=0.20 cputime=285.460 memavail=1626864 print_time=5348.693 buffer_time=2.220 print_stall=10 extruder: target=215 temp=214.8 pwm=0.522
Stats 5338.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4387509 bytes_read=2138720 bytes_retransmit=9 bytes_invalid=0 send_seq=119228 receive_seq=119227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1041749 sysload=0.20 cputime=285.503 memavail=1626880 print_time=5349.498 buffer_time=2.022 print_stall=10 extruder: target=215 temp=214.9 pwm=0.480
Stats 5339.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4389167 bytes_read=2139192 bytes_retransmit=9 bytes_invalid=0 send_seq=119264 receive_seq=119264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.184 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1042840 sysload=0.20 cputime=285.578 memavail=1626884 print_time=5350.841 buffer_time=2.362 print_stall=10 extruder: target=215 temp=215.0 pwm=0.422
Stats 5340.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4391019 bytes_read=2139689 bytes_retransmit=9 bytes_invalid=0 send_seq=119304 receive_seq=119303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=1043775 sysload=0.20 cputime=285.648 memavail=1626892 print_time=5352.174 buffer_time=2.693 print_stall=10 extruder: target=215 temp=215.1 pwm=0.472
Stats 5341.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4391738 bytes_read=2140110 bytes_retransmit=9 bytes_invalid=0 send_seq=119324 receive_seq=119324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.498 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1044556 sysload=0.18 cputime=285.703 memavail=1626624 print_time=5352.672 buffer_time=2.191 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 5342.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4393180 bytes_read=2140557 bytes_retransmit=9 bytes_invalid=0 send_seq=119356 receive_seq=119356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1045979 sysload=0.18 cputime=285.754 memavail=1626640 print_time=5353.482 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.3 pwm=0.345
Stats 5343.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=4394599 bytes_read=2141029 bytes_retransmit=9 bytes_invalid=0 send_seq=119387 receive_seq=119387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1047441 sysload=0.18 cputime=285.829 memavail=1626872 print_time=5354.515 buffer_time=2.032 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 5344.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=4395354 bytes_read=2141455 bytes_retransmit=9 bytes_invalid=0 send_seq=119409 receive_seq=119409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.515 rpi: temp=57.5 mcu_temp: temp=40.3 sd_pos=1048079 sysload=0.18 cputime=285.888 memavail=1625884 print_time=5355.511 buffer_time=2.027 print_stall=10 extruder: target=215 temp=215.1 pwm=0.532
Stats 5345.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=4396455 bytes_read=2141872 bytes_retransmit=9 bytes_invalid=0 send_seq=119435 receive_seq=119435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=57.9 mcu_temp: temp=40.5 sd_pos=1048911 sysload=0.18 cputime=285.944 memavail=1625632 print_time=5356.736 buffer_time=2.252 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 5346.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=4397276 bytes_read=2142294 bytes_retransmit=9 bytes_invalid=0 send_seq=119459 receive_seq=119459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.458 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1049398 sysload=0.17 cputime=286.011 memavail=1625944 print_time=5357.998 buffer_time=2.513 print_stall=10 extruder: target=215 temp=215.1 pwm=0.510
Stats 5347.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=4398725 bytes_read=2142765 bytes_retransmit=9 bytes_invalid=0 send_seq=119490 receive_seq=119490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=57.5 mcu_temp: temp=40.1 sd_pos=1049799 sysload=0.17 cputime=286.072 memavail=1625692 print_time=5360.320 buffer_time=3.834 print_stall=10 extruder: target=215 temp=215.1 pwm=0.510
Stats 5348.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4398999 bytes_read=2143142 bytes_retransmit=9 bytes_invalid=0 send_seq=119505 receive_seq=119505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1049799 sysload=0.17 cputime=286.103 memavail=1625968 print_time=5360.320 buffer_time=2.834 print_stall=10 extruder: target=215 temp=215.1 pwm=0.509
Stats 5349.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4399674 bytes_read=2143544 bytes_retransmit=9 bytes_invalid=0 send_seq=119525 receive_seq=119525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1050045 sysload=0.17 cputime=286.156 memavail=1626196 print_time=5360.712 buffer_time=2.225 print_stall=10 extruder: target=215 temp=214.8 pwm=0.655
Stats 5350.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4400653 bytes_read=2143985 bytes_retransmit=9 bytes_invalid=0 send_seq=119550 receive_seq=119550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.656 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1050642 sysload=0.17 cputime=286.218 memavail=1626184 print_time=5361.610 buffer_time=2.122 print_stall=10 extruder: target=215 temp=215.0 pwm=0.511
Stats 5351.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4402436 bytes_read=2144462 bytes_retransmit=9 bytes_invalid=0 send_seq=119588 receive_seq=119588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=57.5 mcu_temp: temp=41.1 sd_pos=1051212 sysload=0.15 cputime=286.284 memavail=1625932 print_time=5362.530 buffer_time=2.041 print_stall=10 extruder: target=215 temp=214.9 pwm=0.567
Stats 5352.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4403831 bytes_read=2144924 bytes_retransmit=9 bytes_invalid=0 send_seq=119620 receive_seq=119620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1051962 sysload=0.15 cputime=286.361 memavail=1626216 print_time=5363.736 buffer_time=2.247 print_stall=10 extruder: target=215 temp=214.9 pwm=0.476
Stats 5353.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4405032 bytes_read=2145405 bytes_retransmit=9 bytes_invalid=0 send_seq=119650 receive_seq=119650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1052464 sysload=0.15 cputime=286.428 memavail=1625960 print_time=5364.803 buffer_time=2.314 print_stall=10 extruder: target=215 temp=214.9 pwm=0.506
Stats 5354.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4406331 bytes_read=2145847 bytes_retransmit=9 bytes_invalid=0 send_seq=119681 receive_seq=119681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.025 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1054036 sysload=0.15 cputime=286.503 memavail=1625928 print_time=5365.657 buffer_time=2.167 print_stall=10 extruder: target=215 temp=214.8 pwm=0.523
Stats 5355.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4406759 bytes_read=2146239 bytes_retransmit=9 bytes_invalid=0 send_seq=119699 receive_seq=119699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1054095 sysload=0.15 cputime=286.561 memavail=1625980 print_time=5366.917 buffer_time=2.426 print_stall=10 extruder: target=215 temp=214.7 pwm=0.602
Stats 5356.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4407632 bytes_read=2146685 bytes_retransmit=9 bytes_invalid=0 send_seq=119725 receive_seq=119725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=1055252 sysload=0.14 cputime=286.627 memavail=1625688 print_time=5367.505 buffer_time=2.013 print_stall=10 extruder: target=215 temp=214.6 pwm=0.652
Stats 5357.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4409367 bytes_read=2147162 bytes_retransmit=9 bytes_invalid=0 send_seq=119763 receive_seq=119763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.178 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1057444 sysload=0.14 cputime=286.721 memavail=1626188 print_time=5368.585 buffer_time=2.093 print_stall=10 extruder: target=215 temp=214.7 pwm=0.569
Stats 5358.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4410871 bytes_read=2147654 bytes_retransmit=9 bytes_invalid=0 send_seq=119798 receive_seq=119798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1059035 sysload=0.14 cputime=286.794 memavail=1626164 print_time=5369.654 buffer_time=2.161 print_stall=10 extruder: target=215 temp=214.7 pwm=0.577
Stats 5359.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4411986 bytes_read=2148108 bytes_retransmit=9 bytes_invalid=0 send_seq=119828 receive_seq=119828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.105 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=1060310 sysload=0.14 cputime=286.871 memavail=1625912 print_time=5370.499 buffer_time=2.006 print_stall=10 extruder: target=215 temp=214.7 pwm=0.594
Stats 5360.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4412994 bytes_read=2148510 bytes_retransmit=9 bytes_invalid=0 send_seq=119853 receive_seq=119853 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1061048 sysload=0.14 cputime=286.939 memavail=1625948 print_time=5371.650 buffer_time=2.156 print_stall=10 extruder: target=215 temp=214.6 pwm=0.594
Stats 5361.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4413711 bytes_read=2148896 bytes_retransmit=9 bytes_invalid=0 send_seq=119872 receive_seq=119872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=57.5 mcu_temp: temp=40.0 sd_pos=1061639 sysload=0.13 cputime=287.001 memavail=1626172 print_time=5372.737 buffer_time=2.243 print_stall=10 extruder: target=215 temp=214.5 pwm=0.607
Stats 5362.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4414774 bytes_read=2149343 bytes_retransmit=9 bytes_invalid=0 send_seq=119900 receive_seq=119900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=1062401 sysload=0.13 cputime=287.070 memavail=1626200 print_time=5373.688 buffer_time=2.194 print_stall=10 extruder: target=215 temp=214.5 pwm=0.655
Stats 5363.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=4417396 bytes_read=2149905 bytes_retransmit=9 bytes_invalid=0 send_seq=119952 receive_seq=119952 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.554 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1064315 sysload=0.13 cputime=287.152 memavail=1626184 print_time=5375.132 buffer_time=2.637 print_stall=10 extruder: target=215 temp=214.5 pwm=0.611
Stats 5364.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=4419521 bytes_read=2150427 bytes_retransmit=9 bytes_invalid=0 send_seq=119996 receive_seq=119996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=1065608 sysload=0.13 cputime=287.220 memavail=1626168 print_time=5376.086 buffer_time=2.587 print_stall=10 extruder: target=215 temp=214.5 pwm=0.538
Stats 5365.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=4420682 bytes_read=2150883 bytes_retransmit=9 bytes_invalid=0 send_seq=120024 receive_seq=120024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1065871 sysload=0.13 cputime=287.274 memavail=1626232 print_time=5376.501 buffer_time=2.002 print_stall=10 extruder: target=215 temp=214.6 pwm=0.538
Stats 5366.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=4422388 bytes_read=2151365 bytes_retransmit=9 bytes_invalid=0 send_seq=120063 receive_seq=120063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.656 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1066214 sysload=0.12 cputime=287.335 memavail=1626192 print_time=5377.504 buffer_time=2.005 print_stall=10 extruder: target=215 temp=214.7 pwm=0.461
Stats 5367.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=4423573 bytes_read=2151812 bytes_retransmit=9 bytes_invalid=0 send_seq=120092 receive_seq=120092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=57.5 mcu_temp: temp=39.9 sd_pos=1066385 sysload=0.12 cputime=287.392 memavail=1626696 print_time=5378.530 buffer_time=2.031 print_stall=10 extruder: target=215 temp=214.5 pwm=0.587
Stats 5368.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4425066 bytes_read=2152318 bytes_retransmit=9 bytes_invalid=0 send_seq=120127 receive_seq=120127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1066702 sysload=0.12 cputime=287.455 memavail=1626672 print_time=5379.666 buffer_time=2.165 print_stall=10 extruder: target=215 temp=214.6 pwm=0.551
Stats 5369.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4426649 bytes_read=2152780 bytes_retransmit=9 bytes_invalid=0 send_seq=120162 receive_seq=120162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.044 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1066960 sysload=0.12 cputime=287.516 memavail=1626704 print_time=5380.553 buffer_time=2.052 print_stall=10 extruder: target=215 temp=214.8 pwm=0.490
Stats 5370.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4429252 bytes_read=2153347 bytes_retransmit=9 bytes_invalid=0 send_seq=120215 receive_seq=120215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1068817 sysload=0.12 cputime=287.592 memavail=1626748 print_time=5381.597 buffer_time=2.095 print_stall=10 extruder: target=215 temp=214.9 pwm=0.385
Stats 5371.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4430540 bytes_read=2153818 bytes_retransmit=9 bytes_invalid=0 send_seq=120246 receive_seq=120246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1069625 sysload=0.19 cputime=287.664 memavail=1627016 print_time=5382.696 buffer_time=2.194 print_stall=10 extruder: target=215 temp=215.0 pwm=0.454
Stats 5372.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4431865 bytes_read=2154255 bytes_retransmit=9 bytes_invalid=0 send_seq=120276 receive_seq=120276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=57.5 mcu_temp: temp=39.6 sd_pos=1070400 sysload=0.19 cputime=287.729 memavail=1627240 print_time=5383.541 buffer_time=2.038 print_stall=10 extruder: target=215 temp=215.1 pwm=0.444
Stats 5373.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4432816 bytes_read=2154692 bytes_retransmit=9 bytes_invalid=0 send_seq=120300 receive_seq=120300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.521 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=1070889 sysload=0.19 cputime=287.782 memavail=1613368 print_time=5384.540 buffer_time=2.036 print_stall=10 extruder: target=215 temp=215.2 pwm=0.374
Stats 5374.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4434659 bytes_read=2155203 bytes_retransmit=9 bytes_invalid=0 send_seq=120339 receive_seq=120339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.198 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1072101 sysload=0.19 cputime=287.825 memavail=1626140 print_time=5385.717 buffer_time=2.213 print_stall=10 extruder: target=215 temp=215.3 pwm=0.394
Stats 5375.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4436296 bytes_read=2155630 bytes_retransmit=9 bytes_invalid=0 send_seq=120374 receive_seq=120367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=57.9 mcu_temp: temp=40.5 sd_pos=1073906 sysload=0.19 cputime=287.893 memavail=1625660 print_time=5386.776 buffer_time=2.267 print_stall=10 extruder: target=215 temp=215.2 pwm=0.518
Stats 5376.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4437521 bytes_read=2156132 bytes_retransmit=9 bytes_invalid=0 send_seq=120404 receive_seq=120404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=54.9 pwm=0.777 rpi: temp=57.5 mcu_temp: temp=40.2 sd_pos=1075023 sysload=0.25 cputime=287.969 memavail=1625660 print_time=5387.573 buffer_time=2.063 print_stall=10 extruder: target=215 temp=215.4 pwm=0.370
Stats 5377.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4438412 bytes_read=2156553 bytes_retransmit=9 bytes_invalid=0 send_seq=120428 receive_seq=120428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=40.1 sd_pos=1075809 sysload=0.25 cputime=288.034 memavail=1625648 print_time=5388.564 buffer_time=2.053 print_stall=10 extruder: target=215 temp=215.3 pwm=0.452
Stats 5378.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4439315 bytes_read=2156975 bytes_retransmit=9 bytes_invalid=0 send_seq=120452 receive_seq=120452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1076553 sysload=0.25 cputime=288.077 memavail=1625628 print_time=5389.680 buffer_time=2.169 print_stall=10 extruder: target=215 temp=215.2 pwm=0.568
Stats 5379.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4440140 bytes_read=2157407 bytes_retransmit=9 bytes_invalid=0 send_seq=120475 receive_seq=120475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1077012 sysload=0.25 cputime=288.137 memavail=1625604 print_time=5390.550 buffer_time=2.038 print_stall=10 extruder: target=215 temp=215.4 pwm=0.503
Stats 5380.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4441812 bytes_read=2157898 bytes_retransmit=9 bytes_invalid=0 send_seq=120513 receive_seq=120513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1077614 sysload=0.25 cputime=288.210 memavail=1625360 print_time=5393.524 buffer_time=4.012 print_stall=10 extruder: target=215 temp=215.2 pwm=0.547
Stats 5381.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4442088 bytes_read=2158265 bytes_retransmit=9 bytes_invalid=0 send_seq=120529 receive_seq=120529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.1 pwm=0.320 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=1077614 sysload=0.31 cputime=288.263 memavail=1625368 print_time=5393.524 buffer_time=3.011 print_stall=10 extruder: target=215 temp=215.2 pwm=0.593
Stats 5382.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4442334 bytes_read=2158662 bytes_retransmit=9 bytes_invalid=0 send_seq=120545 receive_seq=120545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1077614 sysload=0.31 cputime=288.311 memavail=1625352 print_time=5393.524 buffer_time=2.011 print_stall=10 extruder: target=215 temp=215.2 pwm=0.503
Stats 5383.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=4443743 bytes_read=2159138 bytes_retransmit=9 bytes_invalid=0 send_seq=120577 receive_seq=120577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.4 sd_pos=1078306 sysload=0.31 cputime=288.373 memavail=1625608 print_time=5394.556 buffer_time=2.041 print_stall=10 extruder: target=215 temp=215.2 pwm=0.442
Stats 5384.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=4445780 bytes_read=2159655 bytes_retransmit=9 bytes_invalid=0 send_seq=120623 receive_seq=120623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=1079085 sysload=0.31 cputime=288.448 memavail=1625580 print_time=5395.774 buffer_time=2.258 print_stall=10 extruder: target=215 temp=215.0 pwm=0.614
Stats 5385.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=4446944 bytes_read=2160122 bytes_retransmit=9 bytes_invalid=0 send_seq=120653 receive_seq=120653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.572 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1079689 sysload=0.31 cputime=288.485 memavail=1625360 print_time=5396.668 buffer_time=2.152 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 5386.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=4448457 bytes_read=2160593 bytes_retransmit=9 bytes_invalid=0 send_seq=120687 receive_seq=120687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=57.5 mcu_temp: temp=40.3 sd_pos=1080131 sysload=0.37 cputime=288.546 memavail=1625644 print_time=5397.563 buffer_time=2.046 print_stall=10 extruder: target=215 temp=215.1 pwm=0.470
Stats 5387.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=4449647 bytes_read=2161030 bytes_retransmit=9 bytes_invalid=0 send_seq=120717 receive_seq=120717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.2 pwm=0.019 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1081835 sysload=0.37 cputime=288.631 memavail=1625820 print_time=5398.630 buffer_time=2.112 print_stall=10 extruder: target=215 temp=214.9 pwm=0.576
Stats 5388.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4450261 bytes_read=2161457 bytes_retransmit=9 bytes_invalid=0 send_seq=120736 receive_seq=120736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.386 rpi: temp=56.5 mcu_temp: temp=39.2 sd_pos=1081955 sysload=0.37 cputime=288.683 memavail=1625840 print_time=5400.079 buffer_time=2.560 print_stall=10 extruder: target=215 temp=214.7 pwm=0.631
Stats 5389.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4451108 bytes_read=2161868 bytes_retransmit=9 bytes_invalid=0 send_seq=120758 receive_seq=120758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.336 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1083082 sysload=0.37 cputime=288.748 memavail=1625560 print_time=5400.678 buffer_time=2.159 print_stall=10 extruder: target=215 temp=214.8 pwm=0.531
Stats 5390.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4452702 bytes_read=2162345 bytes_retransmit=9 bytes_invalid=0 send_seq=120796 receive_seq=120796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.247 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1084852 sysload=0.37 cputime=288.825 memavail=1625308 print_time=5401.519 buffer_time=2.000 print_stall=10 extruder: target=215 temp=214.7 pwm=0.530
Stats 5391.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4454299 bytes_read=2162842 bytes_retransmit=9 bytes_invalid=0 send_seq=120832 receive_seq=120832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1086620 sysload=0.42 cputime=288.907 memavail=1625220 print_time=5402.597 buffer_time=2.077 print_stall=10 extruder: target=215 temp=214.7 pwm=0.524
Stats 5392.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4455553 bytes_read=2163288 bytes_retransmit=9 bytes_invalid=0 send_seq=120861 receive_seq=120861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.555 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1088140 sysload=0.42 cputime=288.989 memavail=1625432 print_time=5403.640 buffer_time=2.119 print_stall=10 extruder: target=215 temp=214.5 pwm=0.614
Stats 5393.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4456272 bytes_read=2163711 bytes_retransmit=9 bytes_invalid=0 send_seq=120883 receive_seq=120883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.142 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1088730 sysload=0.42 cputime=289.052 memavail=1625656 print_time=5404.550 buffer_time=2.029 print_stall=10 extruder: target=215 temp=214.8 pwm=0.431
Stats 5394.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4457119 bytes_read=2164153 bytes_retransmit=9 bytes_invalid=0 send_seq=120908 receive_seq=120908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1089386 sysload=0.42 cputime=289.125 memavail=1626000 print_time=5405.724 buffer_time=2.202 print_stall=10 extruder: target=215 temp=214.6 pwm=0.558
Stats 5395.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4458004 bytes_read=2164584 bytes_retransmit=9 bytes_invalid=0 send_seq=120934 receive_seq=120934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.672 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=1089979 sysload=0.42 cputime=289.190 memavail=1626320 print_time=5406.543 buffer_time=2.020 print_stall=10 extruder: target=215 temp=214.5 pwm=0.568
Stats 5396.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4460603 bytes_read=2165131 bytes_retransmit=9 bytes_invalid=0 send_seq=120986 receive_seq=120986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1092076 sysload=0.39 cputime=289.277 memavail=1626816 print_time=5408.076 buffer_time=2.553 print_stall=10 extruder: target=215 temp=214.3 pwm=0.667
Stats 5397.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4461650 bytes_read=2165593 bytes_retransmit=9 bytes_invalid=0 send_seq=121015 receive_seq=121015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.142 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1092549 sysload=0.39 cputime=289.339 memavail=1626304 print_time=5408.562 buffer_time=2.038 print_stall=10 extruder: target=215 temp=214.5 pwm=0.521
Stats 5398.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4464410 bytes_read=2166194 bytes_retransmit=9 bytes_invalid=0 send_seq=121072 receive_seq=121072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1093668 sysload=0.39 cputime=289.387 memavail=1626320 print_time=5409.639 buffer_time=2.114 print_stall=10 extruder: target=215 temp=214.3 pwm=0.655
Stats 5399.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4466061 bytes_read=2166666 bytes_retransmit=9 bytes_invalid=0 send_seq=121109 receive_seq=121109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.348 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1093979 sysload=0.39 cputime=289.449 memavail=1626320 print_time=5410.650 buffer_time=2.125 print_stall=10 extruder: target=215 temp=214.5 pwm=0.558
Stats 5400.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4467169 bytes_read=2167118 bytes_retransmit=9 bytes_invalid=0 send_seq=121136 receive_seq=121136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1094179 sysload=0.39 cputime=289.513 memavail=1626312 print_time=5411.689 buffer_time=2.164 print_stall=10 extruder: target=215 temp=214.5 pwm=0.610
Stats 5401.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4468627 bytes_read=2167579 bytes_retransmit=9 bytes_invalid=0 send_seq=121168 receive_seq=121168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1094468 sysload=0.36 cputime=289.573 memavail=1626064 print_time=5412.812 buffer_time=2.286 print_stall=10 extruder: target=215 temp=214.9 pwm=0.404
Stats 5402.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4470146 bytes_read=2168036 bytes_retransmit=9 bytes_invalid=0 send_seq=121202 receive_seq=121202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.061 rpi: temp=57.5 mcu_temp: temp=39.6 sd_pos=1094728 sysload=0.36 cputime=289.630 memavail=1626304 print_time=5413.697 buffer_time=2.170 print_stall=10 extruder: target=215 temp=214.8 pwm=0.535
Stats 5403.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4472687 bytes_read=2168618 bytes_retransmit=9 bytes_invalid=0 send_seq=121252 receive_seq=121252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1096385 sysload=0.36 cputime=289.702 memavail=1626304 print_time=5414.732 buffer_time=2.204 print_stall=10 extruder: target=215 temp=214.9 pwm=0.462
Stats 5404.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4474118 bytes_read=2169094 bytes_retransmit=9 bytes_invalid=0 send_seq=121287 receive_seq=121287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.444 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1097216 sysload=0.36 cputime=289.772 memavail=1626028 print_time=5415.577 buffer_time=2.049 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 5405.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4475343 bytes_read=2169526 bytes_retransmit=9 bytes_invalid=0 send_seq=121316 receive_seq=121316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1097816 sysload=0.36 cputime=289.837 memavail=1626072 print_time=5416.576 buffer_time=2.047 print_stall=10 extruder: target=215 temp=215.3 pwm=0.329
Stats 5406.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4476641 bytes_read=2169998 bytes_retransmit=9 bytes_invalid=0 send_seq=121347 receive_seq=121347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.179 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1098763 sysload=0.33 cputime=289.906 memavail=1625796 print_time=5418.006 buffer_time=2.476 print_stall=10 extruder: target=215 temp=215.3 pwm=0.431
Stats 5407.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4478075 bytes_read=2170469 bytes_retransmit=9 bytes_invalid=0 send_seq=121381 receive_seq=121381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1099095 sysload=0.33 cputime=289.969 memavail=1625560 print_time=5418.681 buffer_time=2.150 print_stall=10 extruder: target=215 temp=215.6 pwm=0.227
Stats 5408.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000061 bytes_write=4478644 bytes_read=2170866 bytes_retransmit=9 bytes_invalid=0 send_seq=121400 receive_seq=121400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.764 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1099383 sysload=0.33 cputime=290.003 memavail=1626060 print_time=5419.565 buffer_time=2.034 print_stall=10 extruder: target=215 temp=215.3 pwm=0.477
Stats 5409.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000061 bytes_write=4479761 bytes_read=2171318 bytes_retransmit=9 bytes_invalid=0 send_seq=121427 receive_seq=121427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1100213 sysload=0.33 cputime=290.069 memavail=1625892 print_time=5420.790 buffer_time=2.259 print_stall=10 extruder: target=215 temp=215.4 pwm=0.466
Stats 5410.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000061 bytes_write=4480532 bytes_read=2171719 bytes_retransmit=9 bytes_invalid=0 send_seq=121447 receive_seq=121447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1100673 sysload=0.33 cputime=290.131 memavail=1625920 print_time=5422.037 buffer_time=2.504 print_stall=10 extruder: target=215 temp=215.3 pwm=0.573
Stats 5411.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000061 bytes_write=4482049 bytes_read=2172181 bytes_retransmit=9 bytes_invalid=0 send_seq=121482 receive_seq=121482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1101042 sysload=0.38 cputime=290.193 memavail=1625984 print_time=5424.315 buffer_time=3.782 print_stall=10 extruder: target=215 temp=215.3 pwm=0.517
Stats 5412.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000061 bytes_write=4482274 bytes_read=2172568 bytes_retransmit=9 bytes_invalid=0 send_seq=121496 receive_seq=121496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1101042 sysload=0.38 cputime=290.243 memavail=1626000 print_time=5424.315 buffer_time=2.781 print_stall=10 extruder: target=215 temp=215.2 pwm=0.579
Stats 5413.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=4483074 bytes_read=2173004 bytes_retransmit=9 bytes_invalid=0 send_seq=121520 receive_seq=121520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1101287 sysload=0.38 cputime=290.298 memavail=1625984 print_time=5424.711 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.3 pwm=0.526
Stats 5414.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=4484188 bytes_read=2173426 bytes_retransmit=9 bytes_invalid=0 send_seq=121547 receive_seq=121547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1101970 sysload=0.38 cputime=290.360 memavail=1626000 print_time=5425.615 buffer_time=2.080 print_stall=10 extruder: target=215 temp=215.3 pwm=0.497
Stats 5415.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=4485884 bytes_read=2173933 bytes_retransmit=9 bytes_invalid=0 send_seq=121585 receive_seq=121585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1102512 sysload=0.38 cputime=290.424 memavail=1626024 print_time=5426.565 buffer_time=2.029 print_stall=10 extruder: target=215 temp=215.2 pwm=0.582
Stats 5416.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=4487147 bytes_read=2174384 bytes_retransmit=9 bytes_invalid=0 send_seq=121615 receive_seq=121615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1103279 sysload=0.43 cputime=290.492 memavail=1626000 print_time=5427.711 buffer_time=2.174 print_stall=10 extruder: target=215 temp=215.1 pwm=0.495
Stats 5417.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=4488079 bytes_read=2174786 bytes_retransmit=9 bytes_invalid=0 send_seq=121638 receive_seq=121638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1103506 sysload=0.43 cputime=290.549 memavail=1625992 print_time=5429.473 buffer_time=2.935 print_stall=10 extruder: target=215 temp=215.1 pwm=0.551
Stats 5418.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4488588 bytes_read=2175208 bytes_retransmit=9 bytes_invalid=0 send_seq=121657 receive_seq=121657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=57.5 mcu_temp: temp=39.6 sd_pos=1103654 sysload=0.43 cputime=290.581 memavail=1626512 print_time=5429.972 buffer_time=2.434 print_stall=10 extruder: target=215 temp=215.0 pwm=0.551
Stats 5419.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4489043 bytes_read=2175582 bytes_retransmit=9 bytes_invalid=0 send_seq=121674 receive_seq=121674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=57.5 mcu_temp: temp=39.4 sd_pos=1104123 sysload=0.43 cputime=290.641 memavail=1626568 print_time=5430.853 buffer_time=2.314 print_stall=10 extruder: target=215 temp=214.9 pwm=0.625
Stats 5420.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4489821 bytes_read=2175964 bytes_retransmit=9 bytes_invalid=0 send_seq=121695 receive_seq=121695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.371 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1104630 sysload=0.43 cputime=290.701 memavail=1626300 print_time=5431.706 buffer_time=2.166 print_stall=10 extruder: target=215 temp=214.8 pwm=0.625
Stats 5421.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4490433 bytes_read=2176359 bytes_retransmit=9 bytes_invalid=0 send_seq=121713 receive_seq=121713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.568 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1105226 sysload=0.40 cputime=290.759 memavail=1626276 print_time=5432.604 buffer_time=2.063 print_stall=10 extruder: target=215 temp=214.7 pwm=0.604
Stats 5422.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4491420 bytes_read=2176781 bytes_retransmit=9 bytes_invalid=0 send_seq=121738 receive_seq=121738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1105936 sysload=0.40 cputime=290.824 memavail=1626324 print_time=5433.841 buffer_time=2.300 print_stall=10 extruder: target=215 temp=214.6 pwm=0.626
Stats 5423.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=4492409 bytes_read=2177203 bytes_retransmit=9 bytes_invalid=0 send_seq=121762 receive_seq=121762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.437 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1106982 sysload=0.40 cputime=290.889 memavail=1626324 print_time=5434.694 buffer_time=2.153 print_stall=10 extruder: target=215 temp=214.5 pwm=0.649
Stats 5424.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=4494559 bytes_read=2177740 bytes_retransmit=9 bytes_invalid=0 send_seq=121806 receive_seq=121806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.595 rpi: temp=57.5 mcu_temp: temp=39.8 sd_pos=1108537 sysload=0.40 cputime=290.967 memavail=1626568 print_time=5435.748 buffer_time=2.206 print_stall=10 extruder: target=215 temp=214.5 pwm=0.594
Stats 5425.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=4497113 bytes_read=2178296 bytes_retransmit=9 bytes_invalid=0 send_seq=121857 receive_seq=121857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1109660 sysload=0.40 cputime=291.040 memavail=1626336 print_time=5436.767 buffer_time=2.224 print_stall=10 extruder: target=215 temp=214.6 pwm=0.530
Stats 5426.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=4498797 bytes_read=2178768 bytes_retransmit=9 bytes_invalid=0 send_seq=121894 receive_seq=121894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.631 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1110003 sysload=0.44 cputime=291.101 memavail=1626312 print_time=5437.771 buffer_time=2.228 print_stall=10 extruder: target=215 temp=214.7 pwm=0.486
Stats 5427.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=4499916 bytes_read=2179225 bytes_retransmit=9 bytes_invalid=0 send_seq=121922 receive_seq=121922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.517 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1110174 sysload=0.44 cputime=291.161 memavail=1625676 print_time=5438.797 buffer_time=2.252 print_stall=10 extruder: target=215 temp=214.7 pwm=0.495
Stats 5428.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4501078 bytes_read=2179681 bytes_retransmit=9 bytes_invalid=0 send_seq=121950 receive_seq=121950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1110404 sysload=0.44 cputime=291.217 memavail=1625932 print_time=5439.608 buffer_time=2.063 print_stall=10 extruder: target=215 temp=214.8 pwm=0.495
Stats 5429.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4502989 bytes_read=2180178 bytes_retransmit=9 bytes_invalid=0 send_seq=121992 receive_seq=121992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1110747 sysload=0.44 cputime=291.280 memavail=1625776 print_time=5440.820 buffer_time=2.274 print_stall=10 extruder: target=215 temp=214.9 pwm=0.453
Stats 5430.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4505642 bytes_read=2180770 bytes_retransmit=9 bytes_invalid=0 send_seq=122047 receive_seq=122047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.4 sd_pos=1112601 sysload=0.44 cputime=291.360 memavail=1626200 print_time=5441.863 buffer_time=2.317 print_stall=10 extruder: target=215 temp=214.7 pwm=0.611
Stats 5431.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4506769 bytes_read=2181211 bytes_retransmit=9 bytes_invalid=0 send_seq=122075 receive_seq=122075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1113291 sysload=0.49 cputime=291.423 memavail=1626436 print_time=5442.605 buffer_time=2.058 print_stall=10 extruder: target=215 temp=215.1 pwm=0.355
Stats 5432.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4508205 bytes_read=2181668 bytes_retransmit=9 bytes_invalid=0 send_seq=122109 receive_seq=122109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=1114152 sysload=0.49 cputime=291.491 memavail=1626452 print_time=5443.772 buffer_time=2.225 print_stall=10 extruder: target=215 temp=215.0 pwm=0.576
Stats 5433.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4509215 bytes_read=2182135 bytes_retransmit=9 bytes_invalid=0 send_seq=122136 receive_seq=122136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=1114642 sysload=0.49 cputime=291.552 memavail=1626692 print_time=5444.559 buffer_time=2.010 print_stall=10 extruder: target=215 temp=215.4 pwm=0.324
Stats 5434.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4510480 bytes_read=2182586 bytes_retransmit=9 bytes_invalid=0 send_seq=122166 receive_seq=122166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.018 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=1115276 sysload=0.49 cputime=291.614 memavail=1626492 print_time=5446.094 buffer_time=2.545 print_stall=10 extruder: target=215 temp=215.3 pwm=0.398
Stats 5435.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4511065 bytes_read=2182968 bytes_retransmit=9 bytes_invalid=0 send_seq=122185 receive_seq=122185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.340 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1115592 sysload=0.49 cputime=291.668 memavail=1626556 print_time=5446.693 buffer_time=2.142 print_stall=10 extruder: target=215 temp=215.3 pwm=0.481
Stats 5436.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4511956 bytes_read=2183395 bytes_retransmit=9 bytes_invalid=0 send_seq=122207 receive_seq=122207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1116281 sysload=0.45 cputime=291.732 memavail=1626580 print_time=5447.620 buffer_time=2.068 print_stall=10 extruder: target=215 temp=215.3 pwm=0.481
Stats 5437.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4512677 bytes_read=2183806 bytes_retransmit=9 bytes_invalid=0 send_seq=122229 receive_seq=122229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1116653 sysload=0.45 cputime=291.788 memavail=1626576 print_time=5448.739 buffer_time=2.187 print_stall=10 extruder: target=215 temp=215.3 pwm=0.545
Stats 5438.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4514095 bytes_read=2184268 bytes_retransmit=9 bytes_invalid=0 send_seq=122261 receive_seq=122261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.066 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1117242 sysload=0.45 cputime=291.824 memavail=1627320 print_time=5450.952 buffer_time=3.399 print_stall=10 extruder: target=215 temp=215.3 pwm=0.543
Stats 5439.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4514346 bytes_read=2184670 bytes_retransmit=9 bytes_invalid=0 send_seq=122278 receive_seq=122278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.455 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1117242 sysload=0.45 cputime=291.876 memavail=1626836 print_time=5450.952 buffer_time=2.398 print_stall=10 extruder: target=215 temp=215.2 pwm=0.623
Stats 5440.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4515702 bytes_read=2185126 bytes_retransmit=9 bytes_invalid=0 send_seq=122309 receive_seq=122309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.338 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1117472 sysload=0.45 cputime=291.929 memavail=1626816 print_time=5451.617 buffer_time=2.062 print_stall=10 extruder: target=215 temp=215.2 pwm=0.562
Stats 5441.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4517082 bytes_read=2185578 bytes_retransmit=9 bytes_invalid=0 send_seq=122342 receive_seq=122342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1117732 sysload=0.41 cputime=291.983 memavail=1626832 print_time=5452.607 buffer_time=2.052 print_stall=10 extruder: target=215 temp=215.3 pwm=0.530
Stats 5442.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4518247 bytes_read=2186040 bytes_retransmit=9 bytes_invalid=0 send_seq=122371 receive_seq=122371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.356 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1117932 sysload=0.41 cputime=292.020 memavail=1626816 print_time=5453.688 buffer_time=2.132 print_stall=10 extruder: target=215 temp=215.2 pwm=0.542
Stats 5443.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4519890 bytes_read=2186531 bytes_retransmit=9 bytes_invalid=0 send_seq=122406 receive_seq=122406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=57.0 mcu_temp: temp=39.5 sd_pos=1118218 sysload=0.41 cputime=292.085 memavail=1626832 print_time=5454.761 buffer_time=2.205 print_stall=10 extruder: target=215 temp=215.0 pwm=0.646
Stats 5444.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4522060 bytes_read=2187048 bytes_retransmit=9 bytes_invalid=0 send_seq=122452 receive_seq=122452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.438 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1119478 sysload=0.41 cputime=292.151 memavail=1626376 print_time=5455.627 buffer_time=2.070 print_stall=10 extruder: target=215 temp=215.1 pwm=0.452
Stats 5445.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4524187 bytes_read=2187585 bytes_retransmit=9 bytes_invalid=0 send_seq=122496 receive_seq=122496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1119922 sysload=0.41 cputime=292.190 memavail=1626392 print_time=5456.612 buffer_time=2.054 print_stall=10 extruder: target=215 temp=215.1 pwm=0.516
Stats 5446.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4526034 bytes_read=2188086 bytes_retransmit=9 bytes_invalid=0 send_seq=122536 receive_seq=122536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.8 pwm=0.640 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1120877 sysload=0.38 cputime=292.260 memavail=1626392 print_time=5458.076 buffer_time=2.518 print_stall=10 extruder: target=215 temp=215.1 pwm=0.457
Stats 5447.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4527446 bytes_read=2188538 bytes_retransmit=9 bytes_invalid=0 send_seq=122569 receive_seq=122569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=1121302 sysload=0.38 cputime=292.316 memavail=1627144 print_time=5458.830 buffer_time=2.272 print_stall=10 extruder: target=215 temp=214.9 pwm=0.601
Stats 5448.8: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=4528420 bytes_read=2189001 bytes_retransmit=9 bytes_invalid=0 send_seq=122595 receive_seq=122595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1121835 sysload=0.38 cputime=292.374 memavail=1627372 print_time=5459.636 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.0 pwm=0.503
Stats 5449.8: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=4529327 bytes_read=2189427 bytes_retransmit=9 bytes_invalid=0 send_seq=122620 receive_seq=122620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.428 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1122137 sysload=0.38 cputime=292.431 memavail=1627452 print_time=5461.429 buffer_time=2.869 print_stall=10 extruder: target=215 temp=215.1 pwm=0.539
Stats 5450.8: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=4529755 bytes_read=2189809 bytes_retransmit=9 bytes_invalid=0 send_seq=122639 receive_seq=122639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.863 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1122284 sysload=0.38 cputime=292.485 memavail=1627184 print_time=5461.910 buffer_time=2.350 print_stall=10 extruder: target=215 temp=215.0 pwm=0.563
Stats 5451.8: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=4530294 bytes_read=2190211 bytes_retransmit=9 bytes_invalid=0 send_seq=122656 receive_seq=122656 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1122750 sysload=0.35 cputime=292.544 memavail=1626900 print_time=5462.790 buffer_time=2.229 print_stall=10 extruder: target=215 temp=214.8 pwm=0.699
Stats 5452.8: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=4531110 bytes_read=2190627 bytes_retransmit=9 bytes_invalid=0 send_seq=122679 receive_seq=122679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1123260 sysload=0.35 cputime=292.604 memavail=1626700 print_time=5463.643 buffer_time=2.081 print_stall=10 extruder: target=215 temp=215.0 pwm=0.486
Stats 5453.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=4531609 bytes_read=2191014 bytes_retransmit=9 bytes_invalid=0 send_seq=122696 receive_seq=122696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.5 sd_pos=1123885 sysload=0.35 cputime=292.663 memavail=1626624 print_time=5464.573 buffer_time=2.011 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 5454.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=4532669 bytes_read=2191477 bytes_retransmit=9 bytes_invalid=0 send_seq=122723 receive_seq=122723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1124537 sysload=0.35 cputime=292.727 memavail=1626388 print_time=5465.716 buffer_time=2.152 print_stall=10 extruder: target=215 temp=214.7 pwm=0.650
Stats 5455.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=4533964 bytes_read=2191938 bytes_retransmit=9 bytes_invalid=0 send_seq=122755 receive_seq=122755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1126272 sysload=0.35 cputime=292.804 memavail=1626388 print_time=5466.835 buffer_time=2.271 print_stall=10 extruder: target=215 temp=214.7 pwm=0.590
Stats 5456.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=4535889 bytes_read=2192435 bytes_retransmit=9 bytes_invalid=0 send_seq=122797 receive_seq=122797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1127613 sysload=0.32 cputime=292.874 memavail=1626132 print_time=5467.852 buffer_time=2.287 print_stall=10 extruder: target=215 temp=214.6 pwm=0.590
Stats 5457.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=4537804 bytes_read=2192962 bytes_retransmit=9 bytes_invalid=0 send_seq=122839 receive_seq=122839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1128649 sysload=0.32 cputime=292.940 memavail=1625488 print_time=5468.706 buffer_time=2.141 print_stall=10 extruder: target=215 temp=214.5 pwm=0.640
Stats 5458.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4538957 bytes_read=2193423 bytes_retransmit=9 bytes_invalid=0 send_seq=122868 receive_seq=122868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1129313 sysload=0.32 cputime=292.982 memavail=1625764 print_time=5469.693 buffer_time=2.128 print_stall=10 extruder: target=215 temp=214.7 pwm=0.547
Stats 5459.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4540398 bytes_read=2193875 bytes_retransmit=9 bytes_invalid=0 send_seq=122901 receive_seq=122901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1130257 sysload=0.32 cputime=293.028 memavail=1625764 print_time=5470.745 buffer_time=2.180 print_stall=10 extruder: target=215 temp=214.7 pwm=0.557
Stats 5460.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4541335 bytes_read=2194322 bytes_retransmit=9 bytes_invalid=0 send_seq=122927 receive_seq=122927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=1130749 sysload=0.32 cputime=293.088 memavail=1625752 print_time=5471.765 buffer_time=2.199 print_stall=10 extruder: target=215 temp=214.7 pwm=0.570
Stats 5461.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4542462 bytes_read=2194768 bytes_retransmit=9 bytes_invalid=0 send_seq=122956 receive_seq=122956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.4 sd_pos=1131182 sysload=0.30 cputime=293.147 memavail=1625708 print_time=5472.813 buffer_time=2.246 print_stall=10 extruder: target=215 temp=214.9 pwm=0.447
Stats 5462.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4543215 bytes_read=2195155 bytes_retransmit=9 bytes_invalid=0 send_seq=122976 receive_seq=122976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.466 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=1131725 sysload=0.30 cputime=293.205 memavail=1625708 print_time=5473.684 buffer_time=2.116 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 5463.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4544189 bytes_read=2195631 bytes_retransmit=9 bytes_invalid=0 send_seq=123002 receive_seq=123002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=1132382 sysload=0.30 cputime=293.268 memavail=1625448 print_time=5474.800 buffer_time=2.231 print_stall=10 extruder: target=215 temp=215.2 pwm=0.368
Stats 5464.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4545826 bytes_read=2196098 bytes_retransmit=9 bytes_invalid=0 send_seq=123038 receive_seq=123038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=57.5 mcu_temp: temp=39.6 sd_pos=1133151 sysload=0.30 cputime=293.317 memavail=1625456 print_time=5477.626 buffer_time=4.056 print_stall=10 extruder: target=215 temp=215.3 pwm=0.371
Stats 5465.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4546058 bytes_read=2196455 bytes_retransmit=9 bytes_invalid=0 send_seq=123052 receive_seq=123052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.541 rpi: temp=57.5 mcu_temp: temp=39.8 sd_pos=1133151 sysload=0.30 cputime=293.367 memavail=1625448 print_time=5477.626 buffer_time=3.056 print_stall=10 extruder: target=215 temp=215.3 pwm=0.434
Stats 5466.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4546297 bytes_read=2196861 bytes_retransmit=9 bytes_invalid=0 send_seq=123067 receive_seq=123067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1133151 sysload=0.27 cputime=293.401 memavail=1625448 print_time=5477.626 buffer_time=2.055 print_stall=10 extruder: target=215 temp=215.4 pwm=0.403
Stats 5467.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=4548168 bytes_read=2197343 bytes_retransmit=9 bytes_invalid=0 send_seq=123106 receive_seq=123106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.304 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=1133607 sysload=0.27 cputime=293.460 memavail=1625464 print_time=5478.758 buffer_time=2.187 print_stall=10 extruder: target=215 temp=215.2 pwm=0.575
Stats 5468.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4549306 bytes_read=2197785 bytes_retransmit=9 bytes_invalid=0 send_seq=123134 receive_seq=123134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.431 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1133778 sysload=0.27 cputime=293.502 memavail=1625388 print_time=5479.784 buffer_time=2.212 print_stall=10 extruder: target=215 temp=215.2 pwm=0.558
Stats 5469.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4550509 bytes_read=2198271 bytes_retransmit=9 bytes_invalid=0 send_seq=123165 receive_seq=123165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1134008 sysload=0.27 cputime=293.558 memavail=1625660 print_time=5480.596 buffer_time=2.023 print_stall=10 extruder: target=215 temp=215.3 pwm=0.451
Stats 5470.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4552409 bytes_read=2198768 bytes_retransmit=9 bytes_invalid=0 send_seq=123207 receive_seq=123207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=56.5 mcu_temp: temp=39.2 sd_pos=1134352 sysload=0.27 cputime=293.620 memavail=1625900 print_time=5481.807 buffer_time=2.234 print_stall=10 extruder: target=215 temp=215.3 pwm=0.463
Stats 5471.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4555349 bytes_read=2199350 bytes_retransmit=9 bytes_invalid=0 send_seq=123266 receive_seq=123266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.517 rpi: temp=57.0 mcu_temp: temp=39.1 sd_pos=1135628 sysload=0.25 cputime=293.696 memavail=1625976 print_time=5482.971 buffer_time=2.397 print_stall=10 extruder: target=215 temp=215.2 pwm=0.580
Stats 5472.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4556566 bytes_read=2199821 bytes_retransmit=9 bytes_invalid=0 send_seq=123294 receive_seq=123294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=56.5 mcu_temp: temp=39.3 sd_pos=1136022 sysload=0.25 cputime=293.754 memavail=1625968 print_time=5483.706 buffer_time=2.131 print_stall=10 extruder: target=215 temp=215.2 pwm=0.525
Stats 5473.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4558011 bytes_read=2200288 bytes_retransmit=9 bytes_invalid=0 send_seq=123327 receive_seq=123327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=0.859 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1136831 sysload=0.25 cputime=293.821 memavail=1625976 print_time=5484.824 buffer_time=2.249 print_stall=10 extruder: target=215 temp=215.3 pwm=0.493
Stats 5474.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4559631 bytes_read=2200750 bytes_retransmit=9 bytes_invalid=0 send_seq=123362 receive_seq=123362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.049 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1137256 sysload=0.25 cputime=293.886 memavail=1626220 print_time=5485.579 buffer_time=2.002 print_stall=10 extruder: target=215 temp=215.3 pwm=0.476
Stats 5475.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4560830 bytes_read=2201216 bytes_retransmit=9 bytes_invalid=0 send_seq=123389 receive_seq=123389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1137973 sysload=0.25 cputime=293.955 memavail=1626516 print_time=5486.735 buffer_time=2.158 print_stall=10 extruder: target=215 temp=215.1 pwm=0.509
Stats 5476.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4561492 bytes_read=2201603 bytes_retransmit=9 bytes_invalid=0 send_seq=123409 receive_seq=123409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1138093 sysload=0.23 cputime=294.010 memavail=1626516 print_time=5488.167 buffer_time=2.589 print_stall=10 extruder: target=215 temp=215.1 pwm=0.580
Stats 5477.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=4561970 bytes_read=2202015 bytes_retransmit=9 bytes_invalid=0 send_seq=123428 receive_seq=123428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1138270 sysload=0.23 cputime=294.064 memavail=1626280 print_time=5488.690 buffer_time=2.111 print_stall=10 extruder: target=215 temp=215.1 pwm=0.536
Stats 5478.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=4562501 bytes_read=2202411 bytes_retransmit=9 bytes_invalid=0 send_seq=123446 receive_seq=123446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.031 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1138829 sysload=0.23 cputime=294.123 memavail=1626168 print_time=5489.627 buffer_time=2.048 print_stall=10 extruder: target=215 temp=214.9 pwm=0.607
Stats 5479.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=4563383 bytes_read=2202803 bytes_retransmit=9 bytes_invalid=0 send_seq=123469 receive_seq=123469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.691 rpi: temp=56.5 mcu_temp: temp=39.2 sd_pos=1139484 sysload=0.23 cputime=294.190 memavail=1626032 print_time=5490.750 buffer_time=2.170 print_stall=10 extruder: target=215 temp=214.8 pwm=0.563
Stats 5480.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=4564138 bytes_read=2203204 bytes_retransmit=9 bytes_invalid=0 send_seq=123491 receive_seq=123491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.3 sd_pos=1140075 sysload=0.23 cputime=294.252 memavail=1626596 print_time=5491.661 buffer_time=2.081 print_stall=10 extruder: target=215 temp=214.7 pwm=0.626
Stats 5481.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=4565104 bytes_read=2203629 bytes_retransmit=9 bytes_invalid=0 send_seq=123515 receive_seq=123515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.146 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1140958 sysload=0.21 cputime=294.320 memavail=1626596 print_time=5493.013 buffer_time=2.432 print_stall=10 extruder: target=215 temp=214.6 pwm=0.626
Stats 5482.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=4566923 bytes_read=2204116 bytes_retransmit=9 bytes_invalid=0 send_seq=123555 receive_seq=123555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.588 rpi: temp=57.5 mcu_temp: temp=39.1 sd_pos=1142749 sysload=0.21 cputime=294.399 memavail=1626596 print_time=5493.901 buffer_time=2.319 print_stall=10 extruder: target=215 temp=214.7 pwm=0.487
Stats 5483.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4568551 bytes_read=2204613 bytes_retransmit=9 bytes_invalid=0 send_seq=123591 receive_seq=123591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=1144300 sysload=0.21 cputime=294.475 memavail=1626604 print_time=5494.737 buffer_time=2.154 print_stall=10 extruder: target=215 temp=214.6 pwm=0.539
Stats 5484.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4570504 bytes_read=2205139 bytes_retransmit=9 bytes_invalid=0 send_seq=123633 receive_seq=123633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1145059 sysload=0.21 cputime=294.544 memavail=1626080 print_time=5495.756 buffer_time=2.173 print_stall=10 extruder: target=215 temp=214.6 pwm=0.490
Stats 5485.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4571772 bytes_read=2205576 bytes_retransmit=9 bytes_invalid=0 send_seq=123663 receive_seq=123663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.495 rpi: temp=57.0 mcu_temp: temp=39.5 sd_pos=1145660 sysload=0.21 cputime=294.609 memavail=1625820 print_time=5496.815 buffer_time=2.231 print_stall=10 extruder: target=215 temp=214.6 pwm=0.483
Stats 5486.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4573169 bytes_read=2206038 bytes_retransmit=9 bytes_invalid=0 send_seq=123695 receive_seq=123695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1146577 sysload=0.19 cputime=294.680 memavail=1625832 print_time=5497.881 buffer_time=2.296 print_stall=10 extruder: target=215 temp=214.8 pwm=0.482
Stats 5487.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4574257 bytes_read=2206484 bytes_retransmit=9 bytes_invalid=0 send_seq=123721 receive_seq=123721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.1 sd_pos=1147068 sysload=0.19 cputime=294.746 memavail=1625832 print_time=5498.870 buffer_time=2.285 print_stall=10 extruder: target=215 temp=214.9 pwm=0.419
Stats 5488.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4574881 bytes_read=2206886 bytes_retransmit=9 bytes_invalid=0 send_seq=123741 receive_seq=123741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1147357 sysload=0.19 cputime=294.787 memavail=1625848 print_time=5499.727 buffer_time=2.140 print_stall=10 extruder: target=215 temp=214.9 pwm=0.486
Stats 5489.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4575823 bytes_read=2207313 bytes_retransmit=9 bytes_invalid=0 send_seq=123766 receive_seq=123766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.3 sd_pos=1148015 sysload=0.19 cputime=294.853 memavail=1626032 print_time=5500.662 buffer_time=2.073 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 5490.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4576791 bytes_read=2207744 bytes_retransmit=9 bytes_invalid=0 send_seq=123789 receive_seq=123789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1148646 sysload=0.19 cputime=294.919 memavail=1626040 print_time=5502.175 buffer_time=2.581 print_stall=10 extruder: target=215 temp=215.1 pwm=0.443
Stats 5491.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4578316 bytes_read=2208206 bytes_retransmit=9 bytes_invalid=0 send_seq=123824 receive_seq=123824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1149236 sysload=0.18 cputime=294.985 memavail=1626044 print_time=5504.346 buffer_time=3.752 print_stall=10 extruder: target=215 temp=215.1 pwm=0.547
Stats 5492.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4578530 bytes_read=2208578 bytes_retransmit=9 bytes_invalid=0 send_seq=123838 receive_seq=123838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.050 rpi: temp=56.5 mcu_temp: temp=39.3 sd_pos=1149236 sysload=0.18 cputime=295.018 memavail=1626296 print_time=5504.346 buffer_time=2.749 print_stall=10 extruder: target=215 temp=215.2 pwm=0.478
Stats 5493.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4579327 bytes_read=2209019 bytes_retransmit=9 bytes_invalid=0 send_seq=123860 receive_seq=123860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.116 rpi: temp=56.0 mcu_temp: temp=38.9 sd_pos=1149352 sysload=0.18 cputime=295.066 memavail=1626304 print_time=5504.606 buffer_time=2.009 print_stall=10 extruder: target=215 temp=215.3 pwm=0.504
Stats 5494.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4580836 bytes_read=2209476 bytes_retransmit=9 bytes_invalid=0 send_seq=123894 receive_seq=123894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1149667 sysload=0.18 cputime=295.129 memavail=1626040 print_time=5505.653 buffer_time=2.056 print_stall=10 extruder: target=215 temp=215.3 pwm=0.504
Stats 5495.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4582104 bytes_read=2209928 bytes_retransmit=9 bytes_invalid=0 send_seq=123924 receive_seq=123924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1149865 sysload=0.18 cputime=295.187 memavail=1626052 print_time=5506.739 buffer_time=2.140 print_stall=10 extruder: target=215 temp=215.4 pwm=0.431
Stats 5496.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4583306 bytes_read=2210379 bytes_retransmit=9 bytes_invalid=0 send_seq=123951 receive_seq=123951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=57.0 mcu_temp: temp=39.5 sd_pos=1150092 sysload=0.16 cputime=295.250 memavail=1626036 print_time=5507.710 buffer_time=2.111 print_stall=10 extruder: target=215 temp=215.4 pwm=0.425
Stats 5497.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=4585988 bytes_read=2210936 bytes_retransmit=9 bytes_invalid=0 send_seq=124005 receive_seq=124005 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=56.0 mcu_temp: temp=39.1 sd_pos=1151467 sysload=0.16 cputime=295.328 memavail=1626052 print_time=5509.021 buffer_time=2.419 print_stall=10 extruder: target=215 temp=215.2 pwm=0.553
Stats 5498.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=4587623 bytes_read=2211428 bytes_retransmit=9 bytes_invalid=0 send_seq=124040 receive_seq=124040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1151664 sysload=0.16 cputime=295.367 memavail=1626856 print_time=5509.617 buffer_time=2.011 print_stall=10 extruder: target=215 temp=215.2 pwm=0.543
Stats 5499.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=4589029 bytes_read=2211899 bytes_retransmit=9 bytes_invalid=0 send_seq=124071 receive_seq=124071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=1152268 sysload=0.16 cputime=295.431 memavail=1626852 print_time=5510.617 buffer_time=2.010 print_stall=10 extruder: target=215 temp=215.1 pwm=0.562
Stats 5500.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=4590802 bytes_read=2212376 bytes_retransmit=9 bytes_invalid=0 send_seq=124109 receive_seq=124109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=1153077 sysload=0.16 cputime=295.501 memavail=1626608 print_time=5511.823 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.1 pwm=0.581
Stats 5501.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=4592122 bytes_read=2212838 bytes_retransmit=9 bytes_invalid=0 send_seq=124138 receive_seq=124138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1153710 sysload=0.15 cputime=295.565 memavail=1626616 print_time=5512.772 buffer_time=2.164 print_stall=10 extruder: target=215 temp=215.2 pwm=0.474
Stats 5502.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4593175 bytes_read=2213284 bytes_retransmit=9 bytes_invalid=0 send_seq=124164 receive_seq=124164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=57.0 mcu_temp: temp=39.4 sd_pos=1154129 sysload=0.15 cputime=295.629 memavail=1626880 print_time=5514.802 buffer_time=3.194 print_stall=10 extruder: target=215 temp=215.2 pwm=0.443
Stats 5503.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4593468 bytes_read=2213646 bytes_retransmit=9 bytes_invalid=0 send_seq=124179 receive_seq=124179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1154129 sysload=0.15 cputime=295.678 memavail=1626924 print_time=5514.802 buffer_time=2.193 print_stall=10 extruder: target=215 temp=215.2 pwm=0.425
Stats 5504.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4593991 bytes_read=2214053 bytes_retransmit=9 bytes_invalid=0 send_seq=124197 receive_seq=124197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1154452 sysload=0.15 cputime=295.736 memavail=1626672 print_time=5515.609 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.3 pwm=0.372
Stats 5505.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4594875 bytes_read=2214469 bytes_retransmit=9 bytes_invalid=0 send_seq=124220 receive_seq=124220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.4 sd_pos=1155162 sysload=0.15 cputime=295.804 memavail=1626696 print_time=5516.665 buffer_time=2.054 print_stall=10 extruder: target=215 temp=215.0 pwm=0.590
Stats 5506.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4595531 bytes_read=2214851 bytes_retransmit=9 bytes_invalid=0 send_seq=124239 receive_seq=124239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.406 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1155695 sysload=0.14 cputime=295.864 memavail=1626684 print_time=5517.657 buffer_time=2.046 print_stall=10 extruder: target=215 temp=214.9 pwm=0.590
Stats 5507.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=4596661 bytes_read=2215318 bytes_retransmit=9 bytes_invalid=0 send_seq=124266 receive_seq=124266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1156467 sysload=0.14 cputime=295.934 memavail=1626448 print_time=5518.796 buffer_time=2.184 print_stall=10 extruder: target=215 temp=214.9 pwm=0.501
Stats 5508.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=4597701 bytes_read=2215749 bytes_retransmit=9 bytes_invalid=0 send_seq=124292 receive_seq=124292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1157541 sysload=0.14 cputime=296.007 memavail=1626436 print_time=5519.957 buffer_time=2.343 print_stall=10 extruder: target=215 temp=215.0 pwm=0.459
Stats 5509.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=4599592 bytes_read=2216236 bytes_retransmit=9 bytes_invalid=0 send_seq=124332 receive_seq=124332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1159095 sysload=0.14 cputime=296.084 memavail=1626692 print_time=5520.926 buffer_time=2.313 print_stall=10 extruder: target=215 temp=214.9 pwm=0.507
Stats 5510.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=4601849 bytes_read=2216783 bytes_retransmit=9 bytes_invalid=0 send_seq=124378 receive_seq=124378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.7 sd_pos=1160546 sysload=0.14 cputime=296.159 memavail=1626440 print_time=5521.971 buffer_time=2.356 print_stall=10 extruder: target=215 temp=214.8 pwm=0.487
Stats 5511.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=4602833 bytes_read=2217209 bytes_retransmit=9 bytes_invalid=0 send_seq=124403 receive_seq=124403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=57.9 mcu_temp: temp=39.3 sd_pos=1161152 sysload=0.13 cputime=296.224 memavail=1626748 print_time=5522.645 buffer_time=2.029 print_stall=10 extruder: target=215 temp=214.8 pwm=0.537
Stats 5512.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=4604352 bytes_read=2217666 bytes_retransmit=9 bytes_invalid=0 send_seq=124437 receive_seq=124437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1162011 sysload=0.13 cputime=296.296 memavail=1626516 print_time=5523.812 buffer_time=2.196 print_stall=10 extruder: target=215 temp=214.9 pwm=0.514
Stats 5513.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4605431 bytes_read=2218138 bytes_retransmit=9 bytes_invalid=0 send_seq=124465 receive_seq=124465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.595 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=1162585 sysload=0.13 cputime=296.361 memavail=1626752 print_time=5524.905 buffer_time=2.288 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 5514.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4606542 bytes_read=2218574 bytes_retransmit=9 bytes_invalid=0 send_seq=124492 receive_seq=124492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.207 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1163135 sysload=0.13 cputime=296.426 memavail=1626520 print_time=5526.101 buffer_time=2.484 print_stall=10 extruder: target=215 temp=214.9 pwm=0.457
Stats 5515.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4607154 bytes_read=2218972 bytes_retransmit=9 bytes_invalid=0 send_seq=124512 receive_seq=124512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.411 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1163449 sysload=0.13 cputime=296.482 memavail=1626528 print_time=5526.700 buffer_time=2.081 print_stall=10 extruder: target=215 temp=214.8 pwm=0.535
Stats 5516.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4608114 bytes_read=2219419 bytes_retransmit=9 bytes_invalid=0 send_seq=124538 receive_seq=124538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.098 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1164134 sysload=0.12 cputime=296.549 memavail=1626452 print_time=5527.626 buffer_time=2.007 print_stall=10 extruder: target=215 temp=215.1 pwm=0.437
Stats 5517.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4608838 bytes_read=2219830 bytes_retransmit=9 bytes_invalid=0 send_seq=124560 receive_seq=124560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=57.5 mcu_temp: temp=39.7 sd_pos=1164506 sysload=0.12 cputime=296.612 memavail=1626216 print_time=5528.721 buffer_time=2.101 print_stall=10 extruder: target=215 temp=215.2 pwm=0.405
Stats 5518.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4610246 bytes_read=2220302 bytes_retransmit=9 bytes_invalid=0 send_seq=124594 receive_seq=124594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1165102 sysload=0.12 cputime=296.654 memavail=1626220 print_time=5530.851 buffer_time=3.230 print_stall=10 extruder: target=215 temp=215.2 pwm=0.468
Stats 5519.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4610493 bytes_read=2220699 bytes_retransmit=9 bytes_invalid=0 send_seq=124610 receive_seq=124610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1165102 sysload=0.12 cputime=296.704 memavail=1625968 print_time=5530.851 buffer_time=2.229 print_stall=10 extruder: target=215 temp=215.2 pwm=0.498
Stats 5520.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4612135 bytes_read=2221175 bytes_retransmit=9 bytes_invalid=0 send_seq=124645 receive_seq=124645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1165500 sysload=0.12 cputime=296.747 memavail=1625892 print_time=5531.710 buffer_time=2.087 print_stall=10 extruder: target=215 temp=215.2 pwm=0.441
Stats 5521.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4613317 bytes_read=2221607 bytes_retransmit=9 bytes_invalid=0 send_seq=124674 receive_seq=124674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.058 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1165672 sysload=0.11 cputime=296.807 memavail=1626228 print_time=5532.637 buffer_time=2.014 print_stall=10 extruder: target=215 temp=215.2 pwm=0.476
Stats 5522.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4614744 bytes_read=2222084 bytes_retransmit=9 bytes_invalid=0 send_seq=124706 receive_seq=124706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.138 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1165960 sysload=0.11 cputime=296.850 memavail=1626480 print_time=5533.822 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.1 pwm=0.540
Stats 5523.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4616653 bytes_read=2222600 bytes_retransmit=9 bytes_invalid=0 send_seq=124746 receive_seq=124746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.003 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1166300 sysload=0.11 cputime=296.914 memavail=1626468 print_time=5535.033 buffer_time=2.408 print_stall=10 extruder: target=215 temp=215.3 pwm=0.487
Stats 5524.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4619602 bytes_read=2223187 bytes_retransmit=9 bytes_invalid=0 send_seq=124806 receive_seq=124806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1167572 sysload=0.11 cputime=296.988 memavail=1626484 print_time=5536.197 buffer_time=2.572 print_stall=10 extruder: target=215 temp=215.2 pwm=0.560
Stats 5525.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4620776 bytes_read=2223644 bytes_retransmit=9 bytes_invalid=0 send_seq=124834 receive_seq=124834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.273 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1167965 sysload=0.11 cputime=297.047 memavail=1625964 print_time=5536.931 buffer_time=2.305 print_stall=10 extruder: target=215 temp=215.2 pwm=0.466
Stats 5526.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4622304 bytes_read=2224110 bytes_retransmit=9 bytes_invalid=0 send_seq=124867 receive_seq=124867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.359 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1168774 sysload=0.10 cputime=297.117 memavail=1625732 print_time=5538.050 buffer_time=2.423 print_stall=10 extruder: target=215 temp=215.2 pwm=0.557
Stats 5527.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4623671 bytes_read=2224557 bytes_retransmit=9 bytes_invalid=0 send_seq=124899 receive_seq=124899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.490 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=1169199 sysload=0.10 cputime=297.158 memavail=1625604 print_time=5538.804 buffer_time=2.178 print_stall=10 extruder: target=215 temp=215.1 pwm=0.557
Stats 5528.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4624889 bytes_read=2225029 bytes_retransmit=9 bytes_invalid=0 send_seq=124927 receive_seq=124927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.036 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1169946 sysload=0.10 cputime=297.207 memavail=1626608 print_time=5539.994 buffer_time=2.367 print_stall=10 extruder: target=215 temp=215.2 pwm=0.441
Stats 5529.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4625539 bytes_read=2225430 bytes_retransmit=9 bytes_invalid=0 send_seq=124947 receive_seq=124947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=57.5 mcu_temp: temp=39.6 sd_pos=1170036 sysload=0.10 cputime=297.268 memavail=1626628 print_time=5541.370 buffer_time=2.742 print_stall=10 extruder: target=215 temp=215.0 pwm=0.579
Stats 5530.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4626021 bytes_read=2225817 bytes_retransmit=9 bytes_invalid=0 send_seq=124967 receive_seq=124967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1170213 sysload=0.10 cputime=297.325 memavail=1626616 print_time=5541.853 buffer_time=2.224 print_stall=10 extruder: target=215 temp=214.9 pwm=0.526
Stats 5531.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4626519 bytes_read=2226214 bytes_retransmit=9 bytes_invalid=0 send_seq=124983 receive_seq=124983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.722 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1170771 sysload=0.09 cputime=297.387 memavail=1626108 print_time=5542.790 buffer_time=2.161 print_stall=10 extruder: target=215 temp=214.8 pwm=0.583
Stats 5532.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4627361 bytes_read=2226640 bytes_retransmit=9 bytes_invalid=0 send_seq=125008 receive_seq=125008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1171220 sysload=0.09 cputime=297.449 memavail=1625872 print_time=5543.683 buffer_time=2.052 print_stall=10 extruder: target=215 temp=214.7 pwm=0.642
Stats 5533.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4628198 bytes_read=2227062 bytes_retransmit=9 bytes_invalid=0 send_seq=125032 receive_seq=125032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.9 pwm=0.350 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1172022 sysload=0.09 cputime=297.517 memavail=1625800 print_time=5544.824 buffer_time=2.192 print_stall=10 extruder: target=215 temp=214.7 pwm=0.608
Stats 5534.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4628971 bytes_read=2227489 bytes_retransmit=9 bytes_invalid=0 send_seq=125054 receive_seq=125054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.647 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1172464 sysload=0.09 cputime=297.581 memavail=1625800 print_time=5545.662 buffer_time=2.029 print_stall=10 extruder: target=215 temp=214.9 pwm=0.460
Stats 5535.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4631079 bytes_read=2228010 bytes_retransmit=9 bytes_invalid=0 send_seq=125098 receive_seq=125098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.605 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1174617 sysload=0.09 cputime=297.675 memavail=1626068 print_time=5547.132 buffer_time=2.498 print_stall=10 extruder: target=215 temp=214.6 pwm=0.623
Stats 5536.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4632664 bytes_read=2228477 bytes_retransmit=9 bytes_invalid=0 send_seq=125134 receive_seq=125134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.046 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1176124 sysload=0.08 cputime=297.748 memavail=1626312 print_time=5547.917 buffer_time=2.283 print_stall=10 extruder: target=215 temp=214.6 pwm=0.571
Stats 5537.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4634573 bytes_read=2229002 bytes_retransmit=9 bytes_invalid=0 send_seq=125176 receive_seq=125176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1176746 sysload=0.08 cputime=297.817 memavail=1626312 print_time=5548.735 buffer_time=2.100 print_stall=10 extruder: target=215 temp=214.7 pwm=0.502
Stats 5538.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4635996 bytes_read=2229477 bytes_retransmit=9 bytes_invalid=0 send_seq=125210 receive_seq=125210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.354 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1177462 sysload=0.08 cputime=297.888 memavail=1626632 print_time=5549.911 buffer_time=2.275 print_stall=10 extruder: target=215 temp=214.9 pwm=0.429
Stats 5539.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4637330 bytes_read=2229909 bytes_retransmit=9 bytes_invalid=0 send_seq=125241 receive_seq=125241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.8 pwm=0.635 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1178380 sysload=0.08 cputime=297.959 memavail=1626432 print_time=5550.976 buffer_time=2.340 print_stall=10 extruder: target=215 temp=214.8 pwm=0.545
Stats 5540.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4638003 bytes_read=2230309 bytes_retransmit=9 bytes_invalid=0 send_seq=125260 receive_seq=125260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1178719 sysload=0.08 cputime=298.020 memavail=1626460 print_time=5551.755 buffer_time=2.119 print_stall=10 extruder: target=215 temp=214.8 pwm=0.551
Stats 5541.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4639041 bytes_read=2230740 bytes_retransmit=9 bytes_invalid=0 send_seq=125287 receive_seq=125287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.090 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1179156 sysload=0.08 cputime=298.085 memavail=1626436 print_time=5552.798 buffer_time=2.160 print_stall=10 extruder: target=215 temp=214.9 pwm=0.537
Stats 5542.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000062 bytes_write=4639948 bytes_read=2231147 bytes_retransmit=9 bytes_invalid=0 send_seq=125311 receive_seq=125311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.452 rpi: temp=57.0 mcu_temp: temp=39.3 sd_pos=1179814 sysload=0.08 cputime=298.151 memavail=1626168 print_time=5553.733 buffer_time=2.094 print_stall=10 extruder: target=215 temp=215.1 pwm=0.431
Stats 5543.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4640932 bytes_read=2231599 bytes_retransmit=9 bytes_invalid=0 send_seq=125335 receive_seq=125335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1180446 sysload=0.08 cputime=298.197 memavail=1626704 print_time=5555.227 buffer_time=2.588 print_stall=10 extruder: target=215 temp=215.3 pwm=0.446
Stats 5544.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4642476 bytes_read=2232085 bytes_retransmit=9 bytes_invalid=0 send_seq=125372 receive_seq=125372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.010 rpi: temp=57.0 mcu_temp: temp=39.7 sd_pos=1181034 sysload=0.08 cputime=298.266 memavail=1626948 print_time=5557.349 buffer_time=3.709 print_stall=10 extruder: target=215 temp=215.4 pwm=0.365
Stats 5545.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4642693 bytes_read=2232447 bytes_retransmit=9 bytes_invalid=0 send_seq=125387 receive_seq=125387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=1181034 sysload=0.08 cputime=298.316 memavail=1626896 print_time=5557.349 buffer_time=2.708 print_stall=10 extruder: target=215 temp=215.3 pwm=0.456
Stats 5546.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4643994 bytes_read=2232919 bytes_retransmit=9 bytes_invalid=0 send_seq=125418 receive_seq=125418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.443 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1181263 sysload=0.07 cputime=298.356 memavail=1626912 print_time=5558.014 buffer_time=2.372 print_stall=10 extruder: target=215 temp=215.5 pwm=0.391
Stats 5547.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4645017 bytes_read=2233355 bytes_retransmit=9 bytes_invalid=0 send_seq=125445 receive_seq=125445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.053 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=1181466 sysload=0.07 cputime=298.418 memavail=1626896 print_time=5558.656 buffer_time=2.013 print_stall=10 extruder: target=215 temp=215.5 pwm=0.458
Stats 5548.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4646319 bytes_read=2233817 bytes_retransmit=9 bytes_invalid=0 send_seq=125477 receive_seq=125477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1181666 sysload=0.07 cputime=298.478 memavail=1626136 print_time=5559.742 buffer_time=2.099 print_stall=10 extruder: target=215 temp=215.4 pwm=0.483
Stats 5549.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4647435 bytes_read=2234269 bytes_retransmit=9 bytes_invalid=0 send_seq=125504 receive_seq=125504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1181893 sysload=0.07 cputime=298.538 memavail=1626396 print_time=5560.713 buffer_time=2.069 print_stall=10 extruder: target=215 temp=215.2 pwm=0.625
Stats 5550.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4650169 bytes_read=2234835 bytes_retransmit=9 bytes_invalid=0 send_seq=125557 receive_seq=125557 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1183266 sysload=0.07 cputime=298.612 memavail=1626696 print_time=5562.024 buffer_time=2.379 print_stall=10 extruder: target=215 temp=215.4 pwm=0.455
Stats 5551.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4652262 bytes_read=2235347 bytes_retransmit=9 bytes_invalid=0 send_seq=125602 receive_seq=125602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1183708 sysload=0.06 cputime=298.679 memavail=1626960 print_time=5563.009 buffer_time=2.364 print_stall=10 extruder: target=215 temp=215.2 pwm=0.547
Stats 5552.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000038 bytes_write=4653187 bytes_read=2235779 bytes_retransmit=9 bytes_invalid=0 send_seq=125625 receive_seq=125625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.614 rpi: temp=57.0 mcu_temp: temp=39.6 sd_pos=1184304 sysload=0.06 cputime=298.742 memavail=1626692 print_time=5563.907 buffer_time=2.261 print_stall=10 extruder: target=215 temp=215.3 pwm=0.439
Stats 5553.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4655042 bytes_read=2236295 bytes_retransmit=9 bytes_invalid=0 send_seq=125665 receive_seq=125665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1184875 sysload=0.06 cputime=298.809 memavail=1626924 print_time=5564.827 buffer_time=2.181 print_stall=10 extruder: target=215 temp=215.0 pwm=0.619
Stats 5554.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4656298 bytes_read=2236742 bytes_retransmit=9 bytes_invalid=0 send_seq=125697 receive_seq=125697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.098 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=1185508 sysload=0.06 cputime=298.878 memavail=1626704 print_time=5565.775 buffer_time=2.129 print_stall=10 extruder: target=215 temp=215.2 pwm=0.446
Stats 5555.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4657322 bytes_read=2237179 bytes_retransmit=9 bytes_invalid=0 send_seq=125721 receive_seq=125721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1185926 sysload=0.06 cputime=298.949 memavail=1626744 print_time=5567.782 buffer_time=3.135 print_stall=10 extruder: target=215 temp=215.1 pwm=0.531
Stats 5556.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4657639 bytes_read=2237555 bytes_retransmit=9 bytes_invalid=0 send_seq=125736 receive_seq=125736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=1185926 sysload=0.06 cputime=298.999 memavail=1626704 print_time=5567.782 buffer_time=2.134 print_stall=10 extruder: target=215 temp=215.0 pwm=0.564
Stats 5557.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4658219 bytes_read=2237942 bytes_retransmit=9 bytes_invalid=0 send_seq=125756 receive_seq=125756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1186367 sysload=0.06 cputime=299.057 memavail=1626716 print_time=5568.769 buffer_time=2.120 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 5558.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=4659163 bytes_read=2238394 bytes_retransmit=9 bytes_invalid=0 send_seq=125780 receive_seq=125780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.450 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1187110 sysload=0.06 cputime=299.103 memavail=1626228 print_time=5570.072 buffer_time=2.422 print_stall=10 extruder: target=215 temp=214.9 pwm=0.623
Stats 5559.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=4659839 bytes_read=2238800 bytes_retransmit=9 bytes_invalid=0 send_seq=125801 receive_seq=125801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.145 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1187706 sysload=0.06 cputime=299.168 memavail=1626152 print_time=5570.891 buffer_time=2.240 print_stall=10 extruder: target=215 temp=214.9 pwm=0.499
Stats 5560.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=4660673 bytes_read=2239197 bytes_retransmit=9 bytes_invalid=0 send_seq=125823 receive_seq=125823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1188269 sysload=0.06 cputime=299.230 memavail=1626144 print_time=5571.731 buffer_time=2.079 print_stall=10 extruder: target=215 temp=214.9 pwm=0.470
Stats 5561.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=4661771 bytes_read=2239654 bytes_retransmit=9 bytes_invalid=0 send_seq=125851 receive_seq=125851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1189528 sysload=0.05 cputime=299.302 memavail=1626420 print_time=5572.901 buffer_time=2.249 print_stall=10 extruder: target=215 temp=214.8 pwm=0.581
Stats 5562.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=4663665 bytes_read=2240160 bytes_retransmit=9 bytes_invalid=0 send_seq=125892 receive_seq=125892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1191011 sysload=0.05 cputime=299.375 memavail=1626344 print_time=5573.857 buffer_time=2.204 print_stall=10 extruder: target=215 temp=215.0 pwm=0.434
Stats 5563.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4665887 bytes_read=2240687 bytes_retransmit=9 bytes_invalid=0 send_seq=125937 receive_seq=125937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1192411 sysload=0.05 cputime=299.447 memavail=1626120 print_time=5574.874 buffer_time=2.220 print_stall=10 extruder: target=215 temp=214.8 pwm=0.543
Stats 5564.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4667111 bytes_read=2241154 bytes_retransmit=9 bytes_invalid=0 send_seq=125967 receive_seq=125967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=1193162 sysload=0.05 cputime=299.515 memavail=1625620 print_time=5575.919 buffer_time=2.265 print_stall=10 extruder: target=215 temp=214.6 pwm=0.598
Stats 5565.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4668392 bytes_read=2241610 bytes_retransmit=9 bytes_invalid=0 send_seq=125998 receive_seq=125998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1193964 sysload=0.05 cputime=299.584 memavail=1625856 print_time=5576.819 buffer_time=2.164 print_stall=10 extruder: target=215 temp=214.9 pwm=0.500
Stats 5566.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4669393 bytes_read=2242012 bytes_retransmit=9 bytes_invalid=0 send_seq=126021 receive_seq=126021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1194480 sysload=0.05 cputime=299.648 memavail=1625856 print_time=5577.820 buffer_time=2.164 print_stall=10 extruder: target=215 temp=214.9 pwm=0.500
Stats 5567.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4670811 bytes_read=2242494 bytes_retransmit=9 bytes_invalid=0 send_seq=126054 receive_seq=126054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=1194999 sysload=0.05 cputime=299.717 memavail=1626108 print_time=5578.979 buffer_time=2.322 print_stall=10 extruder: target=215 temp=214.8 pwm=0.591
Stats 5568.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4671599 bytes_read=2242930 bytes_retransmit=9 bytes_invalid=0 send_seq=126078 receive_seq=126078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.8 pwm=0.814 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=1195542 sysload=0.05 cputime=299.782 memavail=1626872 print_time=5579.849 buffer_time=2.192 print_stall=10 extruder: target=215 temp=215.0 pwm=0.475
Stats 5569.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4672593 bytes_read=2243337 bytes_retransmit=9 bytes_invalid=0 send_seq=126102 receive_seq=126102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1196203 sysload=0.05 cputime=299.849 memavail=1626812 print_time=5580.965 buffer_time=2.307 print_stall=10 extruder: target=215 temp=214.9 pwm=0.594
Stats 5570.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4674204 bytes_read=2243839 bytes_retransmit=9 bytes_invalid=0 send_seq=126139 receive_seq=126139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.402 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1196941 sysload=0.05 cputime=299.898 memavail=1626556 print_time=5583.661 buffer_time=4.002 print_stall=10 extruder: target=215 temp=215.3 pwm=0.317
Stats 5571.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4674486 bytes_read=2244225 bytes_retransmit=9 bytes_invalid=0 send_seq=126156 receive_seq=126156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.087 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1196941 sysload=0.04 cputime=299.948 memavail=1626324 print_time=5583.661 buffer_time=3.001 print_stall=10 extruder: target=215 temp=215.1 pwm=0.461
Stats 5572.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4674687 bytes_read=2244582 bytes_retransmit=9 bytes_invalid=0 send_seq=126170 receive_seq=126170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1196941 sysload=0.04 cputime=299.997 memavail=1626316 print_time=5583.661 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 5573.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000039 bytes_write=4676645 bytes_read=2245114 bytes_retransmit=9 bytes_invalid=0 send_seq=126210 receive_seq=126210 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1197397 sysload=0.04 cputime=300.066 memavail=1626308 print_time=5584.793 buffer_time=2.133 print_stall=10 extruder: target=215 temp=215.1 pwm=0.502
Stats 5574.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000039 bytes_write=4677775 bytes_read=2245560 bytes_retransmit=9 bytes_invalid=0 send_seq=126239 receive_seq=126239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1197568 sysload=0.04 cputime=300.126 memavail=1626576 print_time=5585.819 buffer_time=2.158 print_stall=10 extruder: target=215 temp=215.2 pwm=0.482
Stats 5575.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000039 bytes_write=4679181 bytes_read=2246012 bytes_retransmit=9 bytes_invalid=0 send_seq=126272 receive_seq=126272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1197885 sysload=0.04 cputime=300.189 memavail=1626828 print_time=5586.955 buffer_time=2.293 print_stall=10 extruder: target=215 temp=215.1 pwm=0.548
Stats 5576.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000039 bytes_write=4680814 bytes_read=2246520 bytes_retransmit=9 bytes_invalid=0 send_seq=126308 receive_seq=126308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=1198144 sysload=0.04 cputime=300.251 memavail=1626828 print_time=5587.843 buffer_time=2.180 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 5577.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000039 bytes_write=4683784 bytes_read=2247121 bytes_retransmit=9 bytes_invalid=0 send_seq=126368 receive_seq=126368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1199423 sysload=0.04 cputime=300.329 memavail=1627148 print_time=5589.007 buffer_time=2.343 print_stall=10 extruder: target=215 temp=215.4 pwm=0.289
Stats 5578.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4684980 bytes_read=2247568 bytes_retransmit=9 bytes_invalid=0 send_seq=126397 receive_seq=126397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=57.0 mcu_temp: temp=40.4 sd_pos=1199816 sysload=0.04 cputime=300.391 memavail=1627968 print_time=5589.741 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.0 pwm=0.582
Stats 5579.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4686500 bytes_read=2248060 bytes_retransmit=9 bytes_invalid=0 send_seq=126432 receive_seq=126432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1200621 sysload=0.04 cputime=300.460 memavail=1627712 print_time=5590.860 buffer_time=2.195 print_stall=10 extruder: target=215 temp=215.2 pwm=0.475
Stats 5580.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4688026 bytes_read=2248531 bytes_retransmit=9 bytes_invalid=0 send_seq=126466 receive_seq=126466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1201255 sysload=0.04 cputime=300.524 memavail=1627652 print_time=5591.916 buffer_time=2.251 print_stall=10 extruder: target=215 temp=215.2 pwm=0.470
Stats 5581.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4689095 bytes_read=2248948 bytes_retransmit=9 bytes_invalid=0 send_seq=126492 receive_seq=126492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1201812 sysload=0.04 cputime=300.586 memavail=1627652 print_time=5592.811 buffer_time=2.145 print_stall=10 extruder: target=215 temp=214.9 pwm=0.612
Stats 5582.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4689717 bytes_read=2249375 bytes_retransmit=9 bytes_invalid=0 send_seq=126514 receive_seq=126514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.274 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1201902 sysload=0.04 cputime=300.645 memavail=1627460 print_time=5594.166 buffer_time=2.500 print_stall=10 extruder: target=215 temp=214.9 pwm=0.596
Stats 5583.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4690195 bytes_read=2249786 bytes_retransmit=9 bytes_invalid=0 send_seq=126533 receive_seq=126533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.194 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1202226 sysload=0.04 cputime=300.704 memavail=1627720 print_time=5594.906 buffer_time=2.240 print_stall=10 extruder: target=215 temp=214.9 pwm=0.583
Stats 5584.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4690983 bytes_read=2250188 bytes_retransmit=9 bytes_invalid=0 send_seq=126556 receive_seq=126556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.288 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1202818 sysload=0.04 cputime=300.771 memavail=1627972 print_time=5595.786 buffer_time=2.119 print_stall=10 extruder: target=215 temp=214.9 pwm=0.533
Stats 5585.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4691700 bytes_read=2250605 bytes_retransmit=9 bytes_invalid=0 send_seq=126576 receive_seq=126576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.659 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1203473 sysload=0.04 cputime=300.837 memavail=1627720 print_time=5596.954 buffer_time=2.287 print_stall=10 extruder: target=215 temp=214.8 pwm=0.545
Stats 5586.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4692594 bytes_read=2251031 bytes_retransmit=9 bytes_invalid=0 send_seq=126601 receive_seq=126601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1204067 sysload=0.03 cputime=300.903 memavail=1627740 print_time=5597.824 buffer_time=2.156 print_stall=10 extruder: target=215 temp=214.5 pwm=0.725
Stats 5587.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4693403 bytes_read=2251418 bytes_retransmit=9 bytes_invalid=0 send_seq=126621 receive_seq=126621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.350 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1204773 sysload=0.03 cputime=300.966 memavail=1627984 print_time=5598.904 buffer_time=2.235 print_stall=10 extruder: target=215 temp=214.6 pwm=0.598
Stats 5588.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4695231 bytes_read=2251974 bytes_retransmit=9 bytes_invalid=0 send_seq=126663 receive_seq=126663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=1206463 sysload=0.03 cputime=301.017 memavail=1628108 print_time=5599.856 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.6 pwm=0.585
Stats 5589.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4697843 bytes_read=2252521 bytes_retransmit=9 bytes_invalid=0 send_seq=126715 receive_seq=126715 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.030 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=1208344 sysload=0.03 cputime=301.095 memavail=1628160 print_time=5601.223 buffer_time=2.553 print_stall=10 extruder: target=215 temp=214.6 pwm=0.585
Stats 5590.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4698762 bytes_read=2252933 bytes_retransmit=9 bytes_invalid=0 send_seq=126740 receive_seq=126740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.152 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1208805 sysload=0.03 cputime=301.159 memavail=1627584 print_time=5601.776 buffer_time=2.105 print_stall=10 extruder: target=215 temp=214.7 pwm=0.494
Stats 5591.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4699951 bytes_read=2253399 bytes_retransmit=9 bytes_invalid=0 send_seq=126767 receive_seq=126767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1209437 sysload=0.03 cputime=301.220 memavail=1627292 print_time=5602.752 buffer_time=2.080 print_stall=10 extruder: target=215 temp=214.6 pwm=0.570
Stats 5592.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=4701083 bytes_read=2253826 bytes_retransmit=9 bytes_invalid=0 send_seq=126795 receive_seq=126795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.235 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1210241 sysload=0.03 cputime=301.288 memavail=1627288 print_time=5603.701 buffer_time=2.028 print_stall=10 extruder: target=215 temp=214.9 pwm=0.364
Stats 5593.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4702078 bytes_read=2254248 bytes_retransmit=9 bytes_invalid=0 send_seq=126819 receive_seq=126819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.235 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1210728 sysload=0.03 cputime=301.350 memavail=1627272 print_time=5604.685 buffer_time=2.012 print_stall=10 extruder: target=215 temp=215.0 pwm=0.388
Stats 5594.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4703078 bytes_read=2254704 bytes_retransmit=9 bytes_invalid=0 send_seq=126844 receive_seq=126844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1211242 sysload=0.03 cputime=301.416 memavail=1626772 print_time=5605.915 buffer_time=2.240 print_stall=10 extruder: target=215 temp=215.1 pwm=0.462
Stats 5595.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4703911 bytes_read=2255101 bytes_retransmit=9 bytes_invalid=0 send_seq=126866 receive_seq=126866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1211843 sysload=0.03 cputime=301.456 memavail=1626472 print_time=5606.722 buffer_time=2.047 print_stall=10 extruder: target=215 temp=215.1 pwm=0.467
Stats 5596.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4704670 bytes_read=2255488 bytes_retransmit=9 bytes_invalid=0 send_seq=126886 receive_seq=126886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=57.0 mcu_temp: temp=40.5 sd_pos=1212273 sysload=0.03 cputime=301.499 memavail=1626268 print_time=5607.908 buffer_time=2.232 print_stall=10 extruder: target=215 temp=215.1 pwm=0.467
Stats 5597.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4706156 bytes_read=2255988 bytes_retransmit=9 bytes_invalid=0 send_seq=126921 receive_seq=126921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=57.9 mcu_temp: temp=40.9 sd_pos=1212862 sysload=0.03 cputime=301.567 memavail=1626480 print_time=5609.980 buffer_time=3.301 print_stall=10 extruder: target=215 temp=215.2 pwm=0.499
Stats 5598.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4706416 bytes_read=2256364 bytes_retransmit=9 bytes_invalid=0 send_seq=126938 receive_seq=126938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.633 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1212862 sysload=0.03 cputime=301.605 memavail=1625788 print_time=5609.980 buffer_time=2.298 print_stall=10 extruder: target=215 temp=215.3 pwm=0.454
Stats 5599.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4707987 bytes_read=2256830 bytes_retransmit=9 bytes_invalid=0 send_seq=126973 receive_seq=126973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=57.5 mcu_temp: temp=40.6 sd_pos=1213151 sysload=0.03 cputime=301.666 memavail=1626300 print_time=5610.901 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.2 pwm=0.548
Stats 5600.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4709396 bytes_read=2257299 bytes_retransmit=9 bytes_invalid=0 send_seq=127006 receive_seq=127006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=57.9 mcu_temp: temp=40.4 sd_pos=1213435 sysload=0.03 cputime=301.731 memavail=1626360 print_time=5612.004 buffer_time=2.316 print_stall=10 extruder: target=215 temp=215.5 pwm=0.304
Stats 5601.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4710583 bytes_read=2257726 bytes_retransmit=9 bytes_invalid=0 send_seq=127034 receive_seq=127034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1213551 sysload=0.11 cputime=301.789 memavail=1626360 print_time=5612.715 buffer_time=2.024 print_stall=10 extruder: target=215 temp=215.2 pwm=0.539
Stats 5602.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4711995 bytes_read=2258193 bytes_retransmit=9 bytes_invalid=0 send_seq=127067 receive_seq=127067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.020 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=1213835 sysload=0.11 cputime=301.848 memavail=1626372 print_time=5613.788 buffer_time=2.097 print_stall=10 extruder: target=215 temp=215.1 pwm=0.647
Stats 5603.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=4715457 bytes_read=2258864 bytes_retransmit=9 bytes_invalid=0 send_seq=127135 receive_seq=127135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.224 rpi: temp=57.0 mcu_temp: temp=40.8 sd_pos=1215289 sysload=0.11 cputime=301.930 memavail=1626364 print_time=5615.251 buffer_time=2.559 print_stall=10 extruder: target=215 temp=215.2 pwm=0.561
Stats 5604.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=4716663 bytes_read=2259301 bytes_retransmit=9 bytes_invalid=0 send_seq=127165 receive_seq=127165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1215683 sysload=0.11 cputime=301.995 memavail=1626112 print_time=5615.985 buffer_time=2.293 print_stall=10 extruder: target=215 temp=215.3 pwm=0.427
Stats 5605.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=4718138 bytes_read=2259768 bytes_retransmit=9 bytes_invalid=0 send_seq=127198 receive_seq=127198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1216493 sysload=0.11 cputime=302.066 memavail=1626120 print_time=5617.104 buffer_time=2.411 print_stall=10 extruder: target=215 temp=215.1 pwm=0.616
Stats 5607.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=4719530 bytes_read=2260239 bytes_retransmit=9 bytes_invalid=0 send_seq=127229 receive_seq=127229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.833 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1216918 sysload=0.10 cputime=302.128 memavail=1626120 print_time=5617.858 buffer_time=2.165 print_stall=10 extruder: target=215 temp=215.0 pwm=0.633
Stats 5608.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=4720743 bytes_read=2260676 bytes_retransmit=9 bytes_invalid=0 send_seq=127259 receive_seq=127259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.8 pwm=0.982 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=1217665 sysload=0.10 cputime=302.196 memavail=1626052 print_time=5619.043 buffer_time=2.349 print_stall=10 extruder: target=215 temp=215.1 pwm=0.490
Stats 5609.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4721364 bytes_read=2261088 bytes_retransmit=9 bytes_invalid=0 send_seq=127278 receive_seq=127278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=1217754 sysload=0.10 cputime=302.253 memavail=1626060 print_time=5620.388 buffer_time=2.693 print_stall=10 extruder: target=215 temp=215.2 pwm=0.490
Stats 5610.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4721837 bytes_read=2261499 bytes_retransmit=9 bytes_invalid=0 send_seq=127297 receive_seq=127297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1217932 sysload=0.10 cputime=302.311 memavail=1626052 print_time=5620.804 buffer_time=2.108 print_stall=10 extruder: target=215 temp=215.0 pwm=0.550
Stats 5611.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4722362 bytes_read=2261876 bytes_retransmit=9 bytes_invalid=0 send_seq=127315 receive_seq=127315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=1218493 sysload=0.10 cputime=302.374 memavail=1625812 print_time=5621.740 buffer_time=2.042 print_stall=10 extruder: target=215 temp=214.9 pwm=0.550
Stats 5612.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4723261 bytes_read=2262298 bytes_retransmit=9 bytes_invalid=0 send_seq=127339 receive_seq=127339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1219147 sysload=0.17 cputime=302.442 memavail=1626072 print_time=5622.862 buffer_time=2.162 print_stall=10 extruder: target=215 temp=214.7 pwm=0.612
Stats 5613.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=4724063 bytes_read=2262719 bytes_retransmit=9 bytes_invalid=0 send_seq=127360 receive_seq=127360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=1219744 sysload=0.17 cputime=302.505 memavail=1626064 print_time=5623.775 buffer_time=2.075 print_stall=10 extruder: target=215 temp=214.7 pwm=0.580
Stats 5614.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=4725165 bytes_read=2263166 bytes_retransmit=9 bytes_invalid=0 send_seq=127389 receive_seq=127389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.626 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1220624 sysload=0.17 cputime=302.563 memavail=1626324 print_time=5625.118 buffer_time=2.418 print_stall=10 extruder: target=215 temp=214.5 pwm=0.679
Stats 5615.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=4726971 bytes_read=2263648 bytes_retransmit=9 bytes_invalid=0 send_seq=127425 receive_seq=127425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1222238 sysload=0.17 cputime=302.647 memavail=1626316 print_time=5626.069 buffer_time=2.369 print_stall=10 extruder: target=215 temp=214.6 pwm=0.579
Stats 5616.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=4728564 bytes_read=2264139 bytes_retransmit=9 bytes_invalid=0 send_seq=127460 receive_seq=127460 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=1223742 sysload=0.17 cputime=302.723 memavail=1619528 print_time=5626.854 buffer_time=2.153 print_stall=10 extruder: target=215 temp=214.9 pwm=0.402
Stats 5617.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=4730612 bytes_read=2264646 bytes_retransmit=9 bytes_invalid=0 send_seq=127504 receive_seq=127504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.196 rpi: temp=57.5 mcu_temp: temp=40.7 sd_pos=1224565 sysload=0.24 cputime=302.768 memavail=1611928 print_time=5627.988 buffer_time=2.286 print_stall=10 extruder: target=215 temp=214.8 pwm=0.426
Stats 5618.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=4731785 bytes_read=2265088 bytes_retransmit=9 bytes_invalid=0 send_seq=127532 receive_seq=127532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=1225197 sysload=0.24 cputime=302.805 memavail=1625532 print_time=5628.965 buffer_time=2.262 print_stall=10 extruder: target=215 temp=214.9 pwm=0.425
Stats 5619.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4732976 bytes_read=2265559 bytes_retransmit=9 bytes_invalid=0 send_seq=127560 receive_seq=127560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.571 rpi: temp=57.9 mcu_temp: temp=40.8 sd_pos=1225887 sysload=0.24 cputime=302.870 memavail=1625836 print_time=5629.808 buffer_time=2.104 print_stall=10 extruder: target=215 temp=214.7 pwm=0.494
Stats 5620.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4734055 bytes_read=2265986 bytes_retransmit=9 bytes_invalid=0 send_seq=127588 receive_seq=127588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.035 rpi: temp=57.5 mcu_temp: temp=41.0 sd_pos=1226489 sysload=0.24 cputime=302.935 memavail=1625852 print_time=5630.897 buffer_time=2.192 print_stall=10 extruder: target=215 temp=214.7 pwm=0.487
Stats 5621.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4734996 bytes_read=2266408 bytes_retransmit=9 bytes_invalid=0 send_seq=127612 receive_seq=127612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.726 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=1227005 sysload=0.24 cputime=302.998 memavail=1627616 print_time=5632.115 buffer_time=2.410 print_stall=10 extruder: target=215 temp=214.9 pwm=0.452
Stats 5622.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4735845 bytes_read=2266839 bytes_retransmit=9 bytes_invalid=0 send_seq=127635 receive_seq=127635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=57.5 mcu_temp: temp=40.6 sd_pos=1227607 sysload=0.22 cputime=303.064 memavail=1627372 print_time=5632.922 buffer_time=2.217 print_stall=10 extruder: target=215 temp=215.1 pwm=0.350
Stats 5623.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4736601 bytes_read=2267236 bytes_retransmit=9 bytes_invalid=0 send_seq=127657 receive_seq=127657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.805 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=1228036 sysload=0.22 cputime=303.126 memavail=1627624 print_time=5634.077 buffer_time=2.371 print_stall=10 extruder: target=215 temp=214.9 pwm=0.563
Stats 5624.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4738081 bytes_read=2267718 bytes_retransmit=9 bytes_invalid=0 send_seq=127690 receive_seq=127690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.1 sd_pos=1228634 sysload=0.22 cputime=303.194 memavail=1627876 print_time=5636.130 buffer_time=3.423 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 5625.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4738330 bytes_read=2268109 bytes_retransmit=9 bytes_invalid=0 send_seq=127705 receive_seq=127705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=1228634 sysload=0.22 cputime=303.247 memavail=1627632 print_time=5636.130 buffer_time=2.423 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 5626.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4739694 bytes_read=2268551 bytes_retransmit=9 bytes_invalid=0 send_seq=127736 receive_seq=127736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1228917 sysload=0.22 cputime=303.310 memavail=1627880 print_time=5636.736 buffer_time=2.028 print_stall=10 extruder: target=215 temp=215.0 pwm=0.521
Stats 5627.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4741070 bytes_read=2269023 bytes_retransmit=9 bytes_invalid=0 send_seq=127767 receive_seq=127767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.531 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=1229204 sysload=0.28 cputime=303.375 memavail=1627836 print_time=5637.916 buffer_time=2.207 print_stall=10 extruder: target=215 temp=215.1 pwm=0.519
Stats 5628.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=4742501 bytes_read=2269479 bytes_retransmit=9 bytes_invalid=0 send_seq=127798 receive_seq=127798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=1229491 sysload=0.28 cputime=303.420 memavail=1627836 print_time=5639.100 buffer_time=2.391 print_stall=10 extruder: target=215 temp=215.4 pwm=0.277
Stats 5629.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000041 bytes_write=4743683 bytes_read=2269931 bytes_retransmit=9 bytes_invalid=0 send_seq=127828 receive_seq=127828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1229663 sysload=0.28 cputime=303.466 memavail=1628088 print_time=5639.866 buffer_time=2.156 print_stall=10 extruder: target=215 temp=215.1 pwm=0.511
Stats 5630.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000041 bytes_write=4746134 bytes_read=2270503 bytes_retransmit=9 bytes_invalid=0 send_seq=127879 receive_seq=127879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.1 sd_pos=1230890 sysload=0.28 cputime=303.543 memavail=1628088 print_time=5640.854 buffer_time=2.142 print_stall=10 extruder: target=215 temp=215.0 pwm=0.594
Stats 5631.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000041 bytes_write=4748251 bytes_read=2271029 bytes_retransmit=9 bytes_invalid=0 send_seq=127924 receive_seq=127924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1231359 sysload=0.28 cputime=303.611 memavail=1628088 print_time=5641.864 buffer_time=2.152 print_stall=10 extruder: target=215 temp=215.2 pwm=0.396
Stats 5632.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000041 bytes_write=4749238 bytes_read=2271441 bytes_retransmit=9 bytes_invalid=0 send_seq=127949 receive_seq=127949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.219 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=1231954 sysload=0.34 cputime=303.677 memavail=1628088 print_time=5642.762 buffer_time=2.050 print_stall=10 extruder: target=215 temp=214.9 pwm=0.614
Stats 5633.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000041 bytes_write=4751567 bytes_read=2271998 bytes_retransmit=9 bytes_invalid=0 send_seq=127997 receive_seq=127997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.110 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1232741 sysload=0.34 cputime=303.751 memavail=1628096 print_time=5644.083 buffer_time=2.370 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 5634.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4752813 bytes_read=2272464 bytes_retransmit=9 bytes_invalid=0 send_seq=128027 receive_seq=128027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.497 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1233275 sysload=0.34 cputime=303.819 memavail=1628096 print_time=5644.889 buffer_time=2.174 print_stall=10 extruder: target=215 temp=215.3 pwm=0.327
Stats 5635.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4753735 bytes_read=2272876 bytes_retransmit=9 bytes_invalid=0 send_seq=128052 receive_seq=128052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.057 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=1233577 sysload=0.34 cputime=303.866 memavail=1628100 print_time=5646.601 buffer_time=2.886 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 5636.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4754125 bytes_read=2273273 bytes_retransmit=9 bytes_invalid=0 send_seq=128068 receive_seq=128068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=57.0 mcu_temp: temp=39.9 sd_pos=1233782 sysload=0.34 cputime=303.922 memavail=1628100 print_time=5647.055 buffer_time=2.339 print_stall=10 extruder: target=215 temp=215.1 pwm=0.520
Stats 5637.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4754745 bytes_read=2273664 bytes_retransmit=9 bytes_invalid=0 send_seq=128086 receive_seq=128086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.217 rpi: temp=57.0 mcu_temp: temp=40.8 sd_pos=1234312 sysload=0.31 cputime=303.988 memavail=1628100 print_time=5647.931 buffer_time=2.215 print_stall=10 extruder: target=215 temp=215.2 pwm=0.421
Stats 5638.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4755543 bytes_read=2274077 bytes_retransmit=9 bytes_invalid=0 send_seq=128109 receive_seq=128109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.108 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=1234761 sysload=0.31 cputime=304.036 memavail=1628352 print_time=5648.825 buffer_time=2.107 print_stall=10 extruder: target=215 temp=214.9 pwm=0.602
Stats 5639.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=4756460 bytes_read=2274529 bytes_retransmit=9 bytes_invalid=0 send_seq=128133 receive_seq=128133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=1235564 sysload=0.31 cputime=304.092 memavail=1628108 print_time=5649.966 buffer_time=2.248 print_stall=10 extruder: target=215 temp=214.9 pwm=0.568
Stats 5640.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=4757158 bytes_read=2274935 bytes_retransmit=9 bytes_invalid=0 send_seq=128154 receive_seq=128154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.234 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=1236009 sysload=0.31 cputime=304.153 memavail=1628108 print_time=5650.804 buffer_time=2.086 print_stall=10 extruder: target=215 temp=214.9 pwm=0.507
Stats 5641.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=4759330 bytes_read=2275447 bytes_retransmit=9 bytes_invalid=0 send_seq=128199 receive_seq=128199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=1238086 sysload=0.31 cputime=304.244 memavail=1628108 print_time=5652.240 buffer_time=2.521 print_stall=10 extruder: target=215 temp=215.0 pwm=0.432
Stats 5642.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=4760931 bytes_read=2275939 bytes_retransmit=9 bytes_invalid=0 send_seq=128234 receive_seq=128234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1239590 sysload=0.29 cputime=304.318 memavail=1628112 print_time=5653.025 buffer_time=2.305 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 5643.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=4762514 bytes_read=2276405 bytes_retransmit=9 bytes_invalid=0 send_seq=128267 receive_seq=128267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=1240212 sysload=0.29 cputime=304.386 memavail=1628112 print_time=5653.843 buffer_time=2.122 print_stall=10 extruder: target=215 temp=214.8 pwm=0.556
Stats 5644.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4764144 bytes_read=2276892 bytes_retransmit=9 bytes_invalid=0 send_seq=128304 receive_seq=128304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1241046 sysload=0.29 cputime=304.455 memavail=1627860 print_time=5655.136 buffer_time=2.415 print_stall=10 extruder: target=215 temp=214.9 pwm=0.456
Stats 5645.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4765306 bytes_read=2277344 bytes_retransmit=9 bytes_invalid=0 send_seq=128331 receive_seq=128331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.667 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=1241736 sysload=0.29 cputime=304.523 memavail=1627860 print_time=5655.979 buffer_time=2.257 print_stall=10 extruder: target=215 temp=214.9 pwm=0.479
Stats 5646.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4766388 bytes_read=2277780 bytes_retransmit=9 bytes_invalid=0 send_seq=128358 receive_seq=128358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1242341 sysload=0.29 cputime=304.588 memavail=1627356 print_time=5657.066 buffer_time=2.344 print_stall=10 extruder: target=215 temp=214.9 pwm=0.444
Stats 5647.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4766993 bytes_read=2278172 bytes_retransmit=9 bytes_invalid=0 send_seq=128379 receive_seq=128379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=1242629 sysload=0.26 cputime=304.646 memavail=1627628 print_time=5657.854 buffer_time=2.132 print_stall=10 extruder: target=215 temp=214.9 pwm=0.551
Stats 5648.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4767989 bytes_read=2278614 bytes_retransmit=9 bytes_invalid=0 send_seq=128404 receive_seq=128404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1243285 sysload=0.26 cputime=304.712 memavail=1627568 print_time=5658.789 buffer_time=2.066 print_stall=10 extruder: target=215 temp=215.0 pwm=0.460
Stats 5649.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4768884 bytes_read=2279045 bytes_retransmit=9 bytes_invalid=0 send_seq=128427 receive_seq=128427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.113 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=1243884 sysload=0.26 cputime=304.775 memavail=1627008 print_time=5660.221 buffer_time=2.497 print_stall=10 extruder: target=215 temp=214.9 pwm=0.559
Stats 5650.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4770388 bytes_read=2279502 bytes_retransmit=9 bytes_invalid=0 send_seq=128461 receive_seq=128461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.060 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1244473 sysload=0.26 cputime=304.836 memavail=1627252 print_time=5662.265 buffer_time=3.541 print_stall=10 extruder: target=215 temp=215.3 pwm=0.247
Stats 5651.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4770618 bytes_read=2279884 bytes_retransmit=9 bytes_invalid=0 send_seq=128474 receive_seq=128474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=1244473 sysload=0.26 cputime=304.888 memavail=1627576 print_time=5662.265 buffer_time=2.540 print_stall=10 extruder: target=215 temp=214.9 pwm=0.590
Stats 5652.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4771988 bytes_read=2280345 bytes_retransmit=9 bytes_invalid=0 send_seq=128506 receive_seq=128506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=57.5 mcu_temp: temp=40.7 sd_pos=1244704 sysload=0.24 cputime=304.945 memavail=1627832 print_time=5662.930 buffer_time=2.204 print_stall=10 extruder: target=215 temp=215.1 pwm=0.494
Stats 5653.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4773310 bytes_read=2280787 bytes_retransmit=9 bytes_invalid=0 send_seq=128537 receive_seq=128537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1244963 sysload=0.24 cputime=305.006 memavail=1627772 print_time=5663.920 buffer_time=2.194 print_stall=10 extruder: target=215 temp=215.2 pwm=0.450
Stats 5654.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=4774479 bytes_read=2281254 bytes_retransmit=9 bytes_invalid=0 send_seq=128564 receive_seq=128564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1245161 sysload=0.24 cputime=305.063 memavail=1627832 print_time=5665.001 buffer_time=2.274 print_stall=10 extruder: target=215 temp=215.2 pwm=0.482
Stats 5655.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=4775876 bytes_read=2281715 bytes_retransmit=9 bytes_invalid=0 send_seq=128596 receive_seq=128596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1245444 sysload=0.24 cputime=305.121 memavail=1628084 print_time=5666.074 buffer_time=2.346 print_stall=10 extruder: target=215 temp=215.1 pwm=0.559
Stats 5656.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=4778056 bytes_read=2282232 bytes_retransmit=9 bytes_invalid=0 send_seq=128642 receive_seq=128642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=1246703 sysload=0.24 cputime=305.194 memavail=1628084 print_time=5666.940 buffer_time=2.212 print_stall=10 extruder: target=215 temp=215.2 pwm=0.432
Stats 5657.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=4780189 bytes_read=2282764 bytes_retransmit=9 bytes_invalid=0 send_seq=128686 receive_seq=128685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.315 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1247146 sysload=0.22 cputime=305.259 memavail=1627832 print_time=5667.925 buffer_time=2.196 print_stall=10 extruder: target=215 temp=215.1 pwm=0.539
Stats 5658.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=4781125 bytes_read=2283184 bytes_retransmit=9 bytes_invalid=0 send_seq=128711 receive_seq=128711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1247742 sysload=0.22 cputime=305.319 memavail=1627580 print_time=5668.823 buffer_time=2.093 print_stall=10 extruder: target=215 temp=215.2 pwm=0.484
Stats 5659.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4782937 bytes_read=2283676 bytes_retransmit=9 bytes_invalid=0 send_seq=128751 receive_seq=128751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=1248313 sysload=0.22 cputime=305.382 memavail=1627856 print_time=5669.743 buffer_time=2.012 print_stall=10 extruder: target=215 temp=215.1 pwm=0.582
Stats 5660.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4784409 bytes_read=2284151 bytes_retransmit=9 bytes_invalid=0 send_seq=128785 receive_seq=128785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.527 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=1249062 sysload=0.22 cputime=305.455 memavail=1627856 print_time=5670.949 buffer_time=2.218 print_stall=10 extruder: target=215 temp=215.0 pwm=0.597
Stats 5661.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4785307 bytes_read=2284569 bytes_retransmit=9 bytes_invalid=0 send_seq=128810 receive_seq=128810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1249364 sysload=0.22 cputime=305.498 memavail=1627656 print_time=5672.647 buffer_time=2.915 print_stall=10 extruder: target=215 temp=215.2 pwm=0.454
Stats 5662.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4785716 bytes_read=2284951 bytes_retransmit=9 bytes_invalid=0 send_seq=128829 receive_seq=128829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.714 rpi: temp=57.5 mcu_temp: temp=41.0 sd_pos=1249569 sysload=0.20 cputime=305.551 memavail=1627544 print_time=5673.076 buffer_time=2.344 print_stall=10 extruder: target=215 temp=215.0 pwm=0.618
Stats 5663.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4786337 bytes_read=2285373 bytes_retransmit=9 bytes_invalid=0 send_seq=128850 receive_seq=128850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=57.5 mcu_temp: temp=41.1 sd_pos=1250100 sysload=0.20 cputime=305.613 memavail=1627232 print_time=5673.953 buffer_time=2.219 print_stall=10 extruder: target=215 temp=215.0 pwm=0.577
Stats 5664.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4787138 bytes_read=2285799 bytes_retransmit=9 bytes_invalid=0 send_seq=128872 receive_seq=128872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=1250548 sysload=0.20 cputime=305.676 memavail=1627804 print_time=5674.846 buffer_time=2.112 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 5665.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4787924 bytes_read=2286201 bytes_retransmit=9 bytes_invalid=0 send_seq=128895 receive_seq=128895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.551 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=1251350 sysload=0.20 cputime=305.741 memavail=1627804 print_time=5675.987 buffer_time=2.252 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 5666.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4788945 bytes_read=2286653 bytes_retransmit=9 bytes_invalid=0 send_seq=128922 receive_seq=128922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1251794 sysload=0.20 cputime=305.807 memavail=1627556 print_time=5676.826 buffer_time=2.090 print_stall=10 extruder: target=215 temp=214.8 pwm=0.527
Stats 5667.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4790863 bytes_read=2287169 bytes_retransmit=9 bytes_invalid=0 send_seq=128965 receive_seq=128965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.713 rpi: temp=57.5 mcu_temp: temp=41.5 sd_pos=1253376 sysload=0.19 cputime=305.884 memavail=1627588 print_time=5677.866 buffer_time=2.130 print_stall=10 extruder: target=215 temp=215.1 pwm=0.318
Stats 5668.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4793412 bytes_read=2287721 bytes_retransmit=9 bytes_invalid=0 send_seq=129018 receive_seq=129018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.248 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=1255334 sysload=0.19 cputime=305.967 memavail=1627556 print_time=5679.168 buffer_time=2.431 print_stall=10 extruder: target=215 temp=214.9 pwm=0.479
Stats 5669.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4794630 bytes_read=2288193 bytes_retransmit=9 bytes_invalid=0 send_seq=129046 receive_seq=129046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1256113 sysload=0.19 cputime=306.019 memavail=1627304 print_time=5680.301 buffer_time=2.563 print_stall=10 extruder: target=215 temp=214.7 pwm=0.609
Stats 5670.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4795618 bytes_read=2288619 bytes_retransmit=9 bytes_invalid=0 send_seq=129071 receive_seq=129071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.049 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=1256483 sysload=0.19 cputime=306.079 memavail=1627304 print_time=5680.772 buffer_time=2.033 print_stall=10 extruder: target=215 temp=214.7 pwm=0.656
Stats 5671.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4796921 bytes_read=2289061 bytes_retransmit=9 bytes_invalid=0 send_seq=129102 receive_seq=129102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=57.5 mcu_temp: temp=40.9 sd_pos=1257407 sysload=0.19 cputime=306.149 memavail=1627564 print_time=5682.202 buffer_time=2.463 print_stall=10 extruder: target=215 temp=214.8 pwm=0.546
Stats 5672.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4797988 bytes_read=2289508 bytes_retransmit=9 bytes_invalid=0 send_seq=129128 receive_seq=129128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.273 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=1257868 sysload=0.17 cputime=306.211 memavail=1627564 print_time=5683.219 buffer_time=2.479 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
Stats 5673.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000061 bytes_write=4798622 bytes_read=2289919 bytes_retransmit=9 bytes_invalid=0 send_seq=129150 receive_seq=129150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.129 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1258184 sysload=0.17 cputime=306.269 memavail=1627504 print_time=5683.817 buffer_time=2.077 print_stall=10 extruder: target=215 temp=214.9 pwm=0.520
Stats 5674.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4799582 bytes_read=2290356 bytes_retransmit=9 bytes_invalid=0 send_seq=129177 receive_seq=129177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.807 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=1258871 sysload=0.17 cputime=306.337 memavail=1627756 print_time=5684.744 buffer_time=2.004 print_stall=10 extruder: target=215 temp=215.0 pwm=0.433
Stats 5675.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4800255 bytes_read=2290778 bytes_retransmit=9 bytes_invalid=0 send_seq=129198 receive_seq=129198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.662 rpi: temp=57.0 mcu_temp: temp=40.2 sd_pos=1259211 sysload=0.17 cputime=306.395 memavail=1628324 print_time=5685.753 buffer_time=2.012 print_stall=10 extruder: target=215 temp=215.2 pwm=0.303
Stats 5676.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4801659 bytes_read=2291249 bytes_retransmit=9 bytes_invalid=0 send_seq=129232 receive_seq=129232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=1259808 sysload=0.17 cputime=306.458 memavail=1628020 print_time=5687.754 buffer_time=3.012 print_stall=10 extruder: target=215 temp=215.1 pwm=0.462
Stats 5677.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4801879 bytes_read=2291611 bytes_retransmit=9 bytes_invalid=0 send_seq=129247 receive_seq=129247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.588 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1259808 sysload=0.16 cputime=306.509 memavail=1627768 print_time=5687.754 buffer_time=2.012 print_stall=10 extruder: target=215 temp=215.0 pwm=0.533
Stats 5678.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=4803851 bytes_read=2292133 bytes_retransmit=9 bytes_invalid=0 send_seq=129288 receive_seq=129288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=1260264 sysload=0.16 cputime=306.579 memavail=1628020 print_time=5688.887 buffer_time=2.144 print_stall=10 extruder: target=215 temp=215.1 pwm=0.521
Stats 5679.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4805025 bytes_read=2292604 bytes_retransmit=9 bytes_invalid=0 send_seq=129319 receive_seq=129319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=57.5 mcu_temp: temp=41.0 sd_pos=1260436 sysload=0.16 cputime=306.641 memavail=1628116 print_time=5689.913 buffer_time=2.169 print_stall=10 extruder: target=215 temp=215.3 pwm=0.403
Stats 5680.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4806468 bytes_read=2293066 bytes_retransmit=9 bytes_invalid=0 send_seq=129354 receive_seq=129354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=1260751 sysload=0.16 cputime=306.702 memavail=1628420 print_time=5691.048 buffer_time=2.304 print_stall=10 extruder: target=215 temp=215.4 pwm=0.329
Stats 5681.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4808110 bytes_read=2293568 bytes_retransmit=9 bytes_invalid=0 send_seq=129391 receive_seq=129391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=1261010 sysload=0.16 cputime=306.765 memavail=1628428 print_time=5691.936 buffer_time=2.191 print_stall=10 extruder: target=215 temp=215.4 pwm=0.367
Stats 5682.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4811052 bytes_read=2294159 bytes_retransmit=9 bytes_invalid=0 send_seq=129449 receive_seq=129449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=1262291 sysload=0.14 cputime=306.837 memavail=1628176 print_time=5693.100 buffer_time=2.354 print_stall=10 extruder: target=215 temp=215.3 pwm=0.510
Stats 5683.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=4812168 bytes_read=2294581 bytes_retransmit=9 bytes_invalid=0 send_seq=129476 receive_seq=129476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=57.5 mcu_temp: temp=40.7 sd_pos=1262685 sysload=0.14 cputime=306.897 memavail=1627916 print_time=5693.834 buffer_time=2.088 print_stall=10 extruder: target=215 temp=215.2 pwm=0.510
Stats 5684.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4813689 bytes_read=2295078 bytes_retransmit=9 bytes_invalid=0 send_seq=129509 receive_seq=129509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.068 rpi: temp=57.5 mcu_temp: temp=41.6 sd_pos=1263495 sysload=0.14 cputime=306.971 memavail=1627360 print_time=5694.953 buffer_time=2.206 print_stall=10 extruder: target=215 temp=215.1 pwm=0.605
Stats 5685.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4815205 bytes_read=2295554 bytes_retransmit=9 bytes_invalid=0 send_seq=129544 receive_seq=129544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.525 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=1264129 sysload=0.14 cputime=307.037 memavail=1627620 print_time=5696.010 buffer_time=2.262 print_stall=10 extruder: target=215 temp=215.2 pwm=0.497
Stats 5686.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4816317 bytes_read=2295971 bytes_retransmit=9 bytes_invalid=0 send_seq=129570 receive_seq=129570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=1264664 sysload=0.14 cputime=307.100 memavail=1627872 print_time=5696.888 buffer_time=2.140 print_stall=10 extruder: target=215 temp=215.4 pwm=0.295
Stats 5687.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4816885 bytes_read=2296388 bytes_retransmit=9 bytes_invalid=0 send_seq=129590 receive_seq=129590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1264753 sysload=0.13 cputime=307.156 memavail=1627876 print_time=5698.196 buffer_time=2.448 print_stall=10 extruder: target=215 temp=215.1 pwm=0.505
Stats 5688.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4817383 bytes_read=2296774 bytes_retransmit=9 bytes_invalid=0 send_seq=129607 receive_seq=129607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.088 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1265076 sysload=0.13 cputime=307.216 memavail=1628380 print_time=5698.841 buffer_time=2.092 print_stall=10 extruder: target=215 temp=215.1 pwm=0.505
Stats 5689.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4818251 bytes_read=2297196 bytes_retransmit=9 bytes_invalid=0 send_seq=129631 receive_seq=129631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=57.5 mcu_temp: temp=41.5 sd_pos=1265787 sysload=0.13 cputime=307.267 memavail=1628664 print_time=5699.897 buffer_time=2.147 print_stall=10 extruder: target=215 temp=215.0 pwm=0.479
Stats 5690.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4818890 bytes_read=2297603 bytes_retransmit=9 bytes_invalid=0 send_seq=129649 receive_seq=129649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=1266322 sysload=0.13 cputime=307.333 memavail=1628084 print_time=5700.889 buffer_time=2.139 print_stall=10 extruder: target=215 temp=214.9 pwm=0.572
Stats 5691.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4819753 bytes_read=2298019 bytes_retransmit=9 bytes_invalid=0 send_seq=129672 receive_seq=129672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=1266917 sysload=0.13 cputime=307.398 memavail=1628108 print_time=5701.759 buffer_time=2.009 print_stall=10 extruder: target=215 temp=214.8 pwm=0.572
Stats 5692.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4821414 bytes_read=2298486 bytes_retransmit=9 bytes_invalid=0 send_seq=129708 receive_seq=129708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1268257 sysload=0.12 cputime=307.474 memavail=1627840 print_time=5703.117 buffer_time=2.366 print_stall=10 extruder: target=215 temp=214.9 pwm=0.421
Stats 5693.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=4822505 bytes_read=2298943 bytes_retransmit=9 bytes_invalid=0 send_seq=129736 receive_seq=129736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1269475 sysload=0.12 cputime=307.547 memavail=1627860 print_time=5703.783 buffer_time=2.031 print_stall=10 extruder: target=215 temp=214.8 pwm=0.525
Stats 5694.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4824880 bytes_read=2299514 bytes_retransmit=9 bytes_invalid=0 send_seq=129787 receive_seq=129787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=1270984 sysload=0.12 cputime=307.629 memavail=1628108 print_time=5704.943 buffer_time=2.190 print_stall=10 extruder: target=215 temp=214.8 pwm=0.500
Stats 5695.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4826109 bytes_read=2299941 bytes_retransmit=9 bytes_invalid=0 send_seq=129815 receive_seq=129815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.470 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1271474 sysload=0.12 cputime=307.695 memavail=1627860 print_time=5705.807 buffer_time=2.053 print_stall=10 extruder: target=215 temp=214.9 pwm=0.500
Stats 5696.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4827493 bytes_read=2300423 bytes_retransmit=9 bytes_invalid=0 send_seq=129848 receive_seq=129848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.8 pwm=0.788 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=1272333 sysload=0.12 cputime=307.769 memavail=1627892 print_time=5706.758 buffer_time=2.004 print_stall=10 extruder: target=215 temp=214.9 pwm=0.500
Stats 5697.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4828706 bytes_read=2300869 bytes_retransmit=9 bytes_invalid=0 send_seq=129877 receive_seq=129877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=1272994 sysload=0.19 cputime=307.838 memavail=1627872 print_time=5708.100 buffer_time=2.345 print_stall=10 extruder: target=215 temp=214.7 pwm=0.566
Stats 5698.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4829411 bytes_read=2301261 bytes_retransmit=9 bytes_invalid=0 send_seq=129898 receive_seq=129898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1273281 sysload=0.19 cputime=307.879 memavail=1627864 print_time=5708.891 buffer_time=2.135 print_stall=10 extruder: target=215 temp=214.8 pwm=0.487
Stats 5699.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4830406 bytes_read=2301739 bytes_retransmit=9 bytes_invalid=0 send_seq=129925 receive_seq=129925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1273936 sysload=0.19 cputime=307.926 memavail=1627560 print_time=5709.826 buffer_time=2.069 print_stall=10 extruder: target=215 temp=214.9 pwm=0.487
Stats 5700.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4831355 bytes_read=2302170 bytes_retransmit=9 bytes_invalid=0 send_seq=129951 receive_seq=129951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=1274508 sysload=0.19 cputime=307.995 memavail=1627568 print_time=5711.231 buffer_time=2.474 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 5701.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4832817 bytes_read=2302627 bytes_retransmit=9 bytes_invalid=0 send_seq=129985 receive_seq=129985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1275096 sysload=0.19 cputime=308.060 memavail=1627568 print_time=5713.222 buffer_time=3.463 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 5702.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4833043 bytes_read=2303014 bytes_retransmit=9 bytes_invalid=0 send_seq=129999 receive_seq=129999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.492 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=1275096 sysload=0.18 cputime=308.116 memavail=1627828 print_time=5713.222 buffer_time=2.463 print_stall=10 extruder: target=215 temp=215.1 pwm=0.507
Stats 5703.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=4834374 bytes_read=2303470 bytes_retransmit=9 bytes_invalid=0 send_seq=130030 receive_seq=130030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.380 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=1275325 sysload=0.18 cputime=308.173 memavail=1627568 print_time=5713.887 buffer_time=2.127 print_stall=10 extruder: target=215 temp=215.1 pwm=0.504
Stats 5704.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000040 bytes_write=4835749 bytes_read=2303937 bytes_retransmit=9 bytes_invalid=0 send_seq=130063 receive_seq=130063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1275586 sysload=0.18 cputime=308.236 memavail=1627840 print_time=5714.877 buffer_time=2.117 print_stall=10 extruder: target=215 temp=215.1 pwm=0.555
Stats 5705.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000040 bytes_write=4836935 bytes_read=2304404 bytes_retransmit=9 bytes_invalid=0 send_seq=130093 receive_seq=130093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=1275786 sysload=0.18 cputime=308.297 memavail=1627572 print_time=5715.957 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.1 pwm=0.539
Stats 5706.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000040 bytes_write=4838352 bytes_read=2304870 bytes_retransmit=9 bytes_invalid=0 send_seq=130126 receive_seq=130126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.108 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1276072 sysload=0.18 cputime=308.361 memavail=1627564 print_time=5717.030 buffer_time=2.269 print_stall=10 extruder: target=215 temp=215.0 pwm=0.615
Stats 5707.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000040 bytes_write=4840573 bytes_read=2305392 bytes_retransmit=9 bytes_invalid=0 send_seq=130173 receive_seq=130173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=57.5 mcu_temp: temp=40.8 sd_pos=1277309 sysload=0.16 cputime=308.444 memavail=1627024 print_time=5717.896 buffer_time=2.134 print_stall=10 extruder: target=215 temp=215.3 pwm=0.382
Stats 5708.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000040 bytes_write=4842677 bytes_read=2305949 bytes_retransmit=9 bytes_invalid=0 send_seq=130221 receive_seq=130221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.122 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=1277753 sysload=0.16 cputime=308.511 memavail=1627016 print_time=5718.881 buffer_time=2.119 print_stall=10 extruder: target=215 temp=215.2 pwm=0.468
Stats 5709.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4843582 bytes_read=2306385 bytes_retransmit=9 bytes_invalid=0 send_seq=130245 receive_seq=130245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=1278350 sysload=0.16 cputime=308.560 memavail=1627528 print_time=5719.778 buffer_time=2.017 print_stall=10 extruder: target=215 temp=215.2 pwm=0.468
Stats 5710.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4845861 bytes_read=2306912 bytes_retransmit=9 bytes_invalid=0 send_seq=130293 receive_seq=130293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1279137 sysload=0.16 cputime=308.634 memavail=1627780 print_time=5721.100 buffer_time=2.337 print_stall=10 extruder: target=215 temp=215.1 pwm=0.503
Stats 5711.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4846863 bytes_read=2307354 bytes_retransmit=9 bytes_invalid=0 send_seq=130318 receive_seq=130318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.061 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=1279670 sysload=0.16 cputime=308.701 memavail=1627784 print_time=5721.905 buffer_time=2.143 print_stall=10 extruder: target=215 temp=215.1 pwm=0.542
Stats 5712.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4847716 bytes_read=2307765 bytes_retransmit=9 bytes_invalid=0 send_seq=130340 receive_seq=130340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.400 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=1279972 sysload=0.15 cputime=308.767 memavail=1627776 print_time=5723.575 buffer_time=2.812 print_stall=10 extruder: target=215 temp=215.1 pwm=0.542
Stats 5713.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4848112 bytes_read=2308137 bytes_retransmit=9 bytes_invalid=0 send_seq=130357 receive_seq=130357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=1280119 sysload=0.15 cputime=308.825 memavail=1627792 print_time=5723.951 buffer_time=2.187 print_stall=10 extruder: target=215 temp=215.1 pwm=0.473
Stats 5714.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=4848700 bytes_read=2308564 bytes_retransmit=9 bytes_invalid=0 send_seq=130376 receive_seq=130376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1280650 sysload=0.15 cputime=308.894 memavail=1627740 print_time=5724.828 buffer_time=2.061 print_stall=10 extruder: target=215 temp=214.9 pwm=0.557
Stats 5715.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=4849581 bytes_read=2308985 bytes_retransmit=9 bytes_invalid=0 send_seq=130400 receive_seq=130400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.380 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=1281309 sysload=0.15 cputime=308.966 memavail=1627480 print_time=5725.949 buffer_time=2.179 print_stall=10 extruder: target=215 temp=214.9 pwm=0.557
Stats 5716.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=4850382 bytes_read=2309387 bytes_retransmit=9 bytes_invalid=0 send_seq=130423 receive_seq=130423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1281902 sysload=0.15 cputime=309.031 memavail=1627236 print_time=5726.862 buffer_time=2.091 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 5717.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=4851076 bytes_read=2309813 bytes_retransmit=9 bytes_invalid=0 send_seq=130443 receive_seq=130443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=1282376 sysload=0.14 cputime=309.098 memavail=1627724 print_time=5727.818 buffer_time=2.044 print_stall=10 extruder: target=215 temp=214.8 pwm=0.518
Stats 5718.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=4853369 bytes_read=2310310 bytes_retransmit=9 bytes_invalid=0 send_seq=130493 receive_seq=130487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=1284673 sysload=0.14 cputime=309.189 memavail=1627512 print_time=5729.119 buffer_time=2.341 print_stall=10 extruder: target=215 temp=214.7 pwm=0.559
Stats 5719.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4855545 bytes_read=2310876 bytes_retransmit=9 bytes_invalid=0 send_seq=130539 receive_seq=130539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=1285931 sysload=0.14 cputime=309.267 memavail=1627492 print_time=5730.033 buffer_time=2.253 print_stall=10 extruder: target=215 temp=214.9 pwm=0.495
Stats 5720.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4856849 bytes_read=2311355 bytes_retransmit=9 bytes_invalid=0 send_seq=130574 receive_seq=130574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=1286680 sysload=0.14 cputime=309.342 memavail=1627452 print_time=5731.143 buffer_time=2.363 print_stall=10 extruder: target=215 temp=214.9 pwm=0.446
Stats 5721.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4858032 bytes_read=2311788 bytes_retransmit=9 bytes_invalid=0 send_seq=130604 receive_seq=130604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1287338 sysload=0.14 cputime=309.412 memavail=1627744 print_time=5731.851 buffer_time=2.070 print_stall=10 extruder: target=215 temp=214.8 pwm=0.499
Stats 5722.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4859119 bytes_read=2312230 bytes_retransmit=9 bytes_invalid=0 send_seq=130632 receive_seq=130632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=1287974 sysload=0.13 cputime=309.485 memavail=1627732 print_time=5733.044 buffer_time=2.263 print_stall=10 extruder: target=215 temp=214.9 pwm=0.442
Stats 5723.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4860172 bytes_read=2312691 bytes_retransmit=9 bytes_invalid=0 send_seq=130661 receive_seq=130661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.346 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=1288407 sysload=0.13 cputime=309.544 memavail=1627180 print_time=5734.031 buffer_time=2.249 print_stall=10 extruder: target=215 temp=215.0 pwm=0.432
Stats 5724.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4860933 bytes_read=2313113 bytes_retransmit=9 bytes_invalid=0 send_seq=130685 receive_seq=130685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=1288948 sysload=0.13 cputime=309.606 memavail=1627456 print_time=5734.901 buffer_time=2.118 print_stall=10 extruder: target=215 temp=215.1 pwm=0.406
Stats 5725.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4861817 bytes_read=2313530 bytes_retransmit=9 bytes_invalid=0 send_seq=130708 receive_seq=130708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=1289608 sysload=0.13 cputime=309.670 memavail=1627180 print_time=5736.017 buffer_time=2.234 print_stall=10 extruder: target=215 temp=214.9 pwm=0.516
Stats 5726.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4863401 bytes_read=2314031 bytes_retransmit=9 bytes_invalid=0 send_seq=130745 receive_seq=130745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=1290319 sysload=0.13 cputime=309.743 memavail=1627516 print_time=5738.488 buffer_time=3.704 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 5727.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4863912 bytes_read=2314408 bytes_retransmit=9 bytes_invalid=0 send_seq=130763 receive_seq=130763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=1290319 sysload=0.20 cputime=309.811 memavail=1627756 print_time=5738.488 buffer_time=2.703 print_stall=10 extruder: target=215 temp=214.9 pwm=0.582
Stats 5728.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4865287 bytes_read=2314875 bytes_retransmit=9 bytes_invalid=0 send_seq=130796 receive_seq=130796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=1290602 sysload=0.20 cputime=309.874 memavail=1628000 print_time=5739.094 buffer_time=2.308 print_stall=10 extruder: target=215 temp=215.1 pwm=0.461
Stats 5729.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=4866378 bytes_read=2315336 bytes_retransmit=9 bytes_invalid=0 send_seq=130822 receive_seq=130822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.406 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=1290831 sysload=0.20 cputime=309.916 memavail=1627984 print_time=5739.935 buffer_time=2.148 print_stall=10 extruder: target=215 temp=215.0 pwm=0.574
Stats 5730.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=4867560 bytes_read=2315773 bytes_retransmit=9 bytes_invalid=0 send_seq=130852 receive_seq=130852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=1291005 sysload=0.20 cputime=309.979 memavail=1628264 print_time=5741.013 buffer_time=2.225 print_stall=10 extruder: target=215 temp=215.0 pwm=0.516
Stats 5731.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=4869206 bytes_read=2316265 bytes_retransmit=9 bytes_invalid=0 send_seq=130890 receive_seq=130890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.019 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=1291348 sysload=0.20 cputime=310.045 memavail=1628272 print_time=5742.225 buffer_time=2.436 print_stall=10 extruder: target=215 temp=215.1 pwm=0.405
Stats 5732.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=4871560 bytes_read=2316826 bytes_retransmit=9 bytes_invalid=0 send_seq=130939 receive_seq=130939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=1292578 sysload=0.18 cputime=310.125 memavail=1628248 print_time=5743.212 buffer_time=2.422 print_stall=10 extruder: target=215 temp=215.1 pwm=0.472
Stats 5733.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=4873279 bytes_read=2317308 bytes_retransmit=9 bytes_invalid=0 send_seq=130978 receive_seq=130978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=1292802 sysload=0.18 cputime=310.188 memavail=1628592 print_time=5743.834 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.1 pwm=0.537
Stats 5734.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4874651 bytes_read=2317785 bytes_retransmit=9 bytes_invalid=0 send_seq=131010 receive_seq=131010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=1293406 sysload=0.18 cputime=310.258 memavail=1628580 print_time=5744.834 buffer_time=2.043 print_stall=10 extruder: target=215 temp=215.3 pwm=0.406
Stats 5735.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4876538 bytes_read=2318296 bytes_retransmit=9 bytes_invalid=0 send_seq=131049 receive_seq=131049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=1294216 sysload=0.18 cputime=310.335 memavail=1628340 print_time=5746.041 buffer_time=2.249 print_stall=10 extruder: target=215 temp=215.2 pwm=0.427
Stats 5736.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4877763 bytes_read=2318733 bytes_retransmit=9 bytes_invalid=0 send_seq=131079 receive_seq=131079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=57.5 mcu_temp: temp=41.2 sd_pos=1294849 sysload=0.18 cputime=310.407 memavail=1628608 print_time=5746.990 buffer_time=2.198 print_stall=10 extruder: target=215 temp=215.2 pwm=0.429
Stats 5737.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4878896 bytes_read=2319190 bytes_retransmit=9 bytes_invalid=0 send_seq=131110 receive_seq=131110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=1295298 sysload=0.17 cputime=310.475 memavail=1628332 print_time=5749.076 buffer_time=3.284 print_stall=10 extruder: target=215 temp=215.0 pwm=0.571
Stats 5738.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4879160 bytes_read=2319571 bytes_retransmit=9 bytes_invalid=0 send_seq=131123 receive_seq=131123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=1295298 sysload=0.17 cputime=310.528 memavail=1627880 print_time=5749.076 buffer_time=2.283 print_stall=10 extruder: target=215 temp=215.0 pwm=0.491
Stats 5739.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4879813 bytes_read=2319983 bytes_retransmit=9 bytes_invalid=0 send_seq=131145 receive_seq=131145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=1295741 sysload=0.17 cputime=310.571 memavail=1627604 print_time=5749.940 buffer_time=2.145 print_stall=10 extruder: target=215 temp=215.1 pwm=0.429
Stats 5740.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4880704 bytes_read=2320405 bytes_retransmit=9 bytes_invalid=0 send_seq=131169 receive_seq=131169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.779 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=1296396 sysload=0.17 cputime=310.642 memavail=1627604 print_time=5751.021 buffer_time=2.226 print_stall=10 extruder: target=215 temp=214.8 pwm=0.619
Stats 5741.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4881390 bytes_read=2320821 bytes_retransmit=9 bytes_invalid=0 send_seq=131189 receive_seq=131189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=1296988 sysload=0.17 cputime=310.710 memavail=1627604 print_time=5751.840 buffer_time=2.044 print_stall=10 extruder: target=215 temp=214.9 pwm=0.515
Stats 5742.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4882273 bytes_read=2321223 bytes_retransmit=9 bytes_invalid=0 send_seq=131212 receive_seq=131212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=1297749 sysload=0.15 cputime=310.763 memavail=1627872 print_time=5753.157 buffer_time=2.361 print_stall=10 extruder: target=215 temp=214.8 pwm=0.536
Stats 5743.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=4884177 bytes_read=2321735 bytes_retransmit=9 bytes_invalid=0 send_seq=131254 receive_seq=131254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1298867 sysload=0.15 cputime=310.837 memavail=1628084 print_time=5753.840 buffer_time=2.043 print_stall=10 extruder: target=215 temp=215.0 pwm=0.411
Stats 5744.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4886219 bytes_read=2322276 bytes_retransmit=9 bytes_invalid=0 send_seq=131296 receive_seq=131296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.8 pwm=0.883 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=1300903 sysload=0.15 cputime=310.930 memavail=1628136 print_time=5755.033 buffer_time=2.235 print_stall=10 extruder: target=215 temp=214.8 pwm=0.568
Stats 5745.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4887716 bytes_read=2322733 bytes_retransmit=9 bytes_invalid=0 send_seq=131330 receive_seq=131330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.045 rpi: temp=57.5 mcu_temp: temp=41.1 sd_pos=1301736 sysload=0.15 cputime=311.004 memavail=1628616 print_time=5755.899 buffer_time=2.101 print_stall=10 extruder: target=215 temp=214.8 pwm=0.503
Stats 5746.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4888869 bytes_read=2323175 bytes_retransmit=9 bytes_invalid=0 send_seq=131358 receive_seq=131358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=1302307 sysload=0.15 cputime=311.072 memavail=1628860 print_time=5756.898 buffer_time=2.099 print_stall=10 extruder: target=215 temp=214.8 pwm=0.503
Stats 5747.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4890204 bytes_read=2323651 bytes_retransmit=9 bytes_invalid=0 send_seq=131390 receive_seq=131390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1303231 sysload=0.14 cputime=311.151 memavail=1628572 print_time=5758.328 buffer_time=2.529 print_stall=10 extruder: target=215 temp=214.8 pwm=0.534
Stats 5748.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=4891221 bytes_read=2324073 bytes_retransmit=9 bytes_invalid=0 send_seq=131417 receive_seq=131417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=1303634 sysload=0.14 cputime=311.219 memavail=1628572 print_time=5759.301 buffer_time=2.501 print_stall=10 extruder: target=215 temp=214.8 pwm=0.534
Stats 5749.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4891838 bytes_read=2324485 bytes_retransmit=9 bytes_invalid=0 send_seq=131436 receive_seq=131436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1303948 sysload=0.14 cputime=311.282 memavail=1628572 print_time=5759.900 buffer_time=2.099 print_stall=10 extruder: target=215 temp=214.6 pwm=0.645
Stats 5750.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4892759 bytes_read=2324926 bytes_retransmit=9 bytes_invalid=0 send_seq=131461 receive_seq=131461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.191 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1304636 sysload=0.14 cputime=311.358 memavail=1628564 print_time=5760.827 buffer_time=2.025 print_stall=10 extruder: target=215 temp=214.9 pwm=0.414
Stats 5751.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4894450 bytes_read=2325343 bytes_retransmit=9 bytes_invalid=0 send_seq=131499 receive_seq=131487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=160 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.526 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=1305511 sysload=0.14 cputime=311.436 memavail=1628580 print_time=5763.732 buffer_time=3.925 print_stall=10 extruder: target=215 temp=214.8 pwm=0.512
Stats 5752.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4894898 bytes_read=2325810 bytes_retransmit=9 bytes_invalid=0 send_seq=131517 receive_seq=131517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=1305511 sysload=0.13 cputime=311.494 memavail=1628304 print_time=5763.732 buffer_time=2.924 print_stall=10 extruder: target=215 temp=214.9 pwm=0.526
Stats 5753.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000048 bytes_write=4895644 bytes_read=2326221 bytes_retransmit=9 bytes_invalid=0 send_seq=131539 receive_seq=131539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.497 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=1305626 sysload=0.13 cputime=311.551 memavail=1628324 print_time=5763.992 buffer_time=2.183 print_stall=10 extruder: target=215 temp=215.0 pwm=0.463
Stats 5754.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4897193 bytes_read=2326693 bytes_retransmit=9 bytes_invalid=0 send_seq=131573 receive_seq=131573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.484 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=1305943 sysload=0.13 cputime=311.613 memavail=1628300 print_time=5765.039 buffer_time=2.230 print_stall=10 extruder: target=215 temp=215.0 pwm=0.445
Stats 5755.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4898469 bytes_read=2327165 bytes_retransmit=9 bytes_invalid=0 send_seq=131604 receive_seq=131604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1306143 sysload=0.13 cputime=311.679 memavail=1628324 print_time=5766.125 buffer_time=2.315 print_stall=10 extruder: target=215 temp=215.1 pwm=0.456
Stats 5756.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4899664 bytes_read=2327611 bytes_retransmit=9 bytes_invalid=0 send_seq=131633 receive_seq=131633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=1306372 sysload=0.13 cputime=311.746 memavail=1628316 print_time=5767.096 buffer_time=2.286 print_stall=10 extruder: target=215 temp=215.0 pwm=0.574
Stats 5757.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4901315 bytes_read=2328083 bytes_retransmit=9 bytes_invalid=0 send_seq=131670 receive_seq=131670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1306688 sysload=0.12 cputime=311.812 memavail=1628328 print_time=5767.957 buffer_time=2.145 print_stall=10 extruder: target=215 temp=215.0 pwm=0.543
Stats 5758.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4904058 bytes_read=2328680 bytes_retransmit=9 bytes_invalid=0 send_seq=131726 receive_seq=131726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.432 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1307922 sysload=0.12 cputime=311.888 memavail=1628072 print_time=5769.002 buffer_time=2.191 print_stall=10 extruder: target=215 temp=215.3 pwm=0.423
Stats 5759.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4905471 bytes_read=2329156 bytes_retransmit=9 bytes_invalid=0 send_seq=131758 receive_seq=131758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.7 sd_pos=1308525 sysload=0.12 cputime=311.952 memavail=1627596 print_time=5770.002 buffer_time=2.191 print_stall=10 extruder: target=215 temp=215.2 pwm=0.505
Stats 5760.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4906998 bytes_read=2329634 bytes_retransmit=9 bytes_invalid=0 send_seq=131794 receive_seq=131794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=1309126 sysload=0.12 cputime=312.024 memavail=1627608 print_time=5770.856 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.3 pwm=0.484
Stats 5761.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4908568 bytes_read=2330126 bytes_retransmit=9 bytes_invalid=0 send_seq=131829 receive_seq=131829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=1309760 sysload=0.12 cputime=312.093 memavail=1627632 print_time=5771.913 buffer_time=2.100 print_stall=10 extruder: target=215 temp=215.3 pwm=0.484
Stats 5762.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4909936 bytes_read=2330582 bytes_retransmit=9 bytes_invalid=0 send_seq=131860 receive_seq=131860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.215 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=1310415 sysload=0.11 cputime=312.164 memavail=1627376 print_time=5774.253 buffer_time=3.440 print_stall=10 extruder: target=215 temp=215.1 pwm=0.607
Stats 5763.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=4910194 bytes_read=2330939 bytes_retransmit=9 bytes_invalid=0 send_seq=131874 receive_seq=131874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1310415 sysload=0.11 cputime=312.216 memavail=1627352 print_time=5774.253 buffer_time=2.439 print_stall=10 extruder: target=215 temp=215.1 pwm=0.572
Stats 5764.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000058 bytes_write=4910849 bytes_read=2331371 bytes_retransmit=9 bytes_invalid=0 send_seq=131894 receive_seq=131894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1310913 sysload=0.11 cputime=312.282 memavail=1627336 print_time=5775.137 buffer_time=2.323 print_stall=10 extruder: target=215 temp=215.2 pwm=0.433
Stats 5765.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000058 bytes_write=4911658 bytes_read=2331782 bytes_retransmit=9 bytes_invalid=0 send_seq=131916 receive_seq=131916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1311421 sysload=0.11 cputime=312.346 memavail=1627336 print_time=5775.990 buffer_time=2.175 print_stall=10 extruder: target=215 temp=215.1 pwm=0.545
Stats 5766.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000058 bytes_write=4912268 bytes_read=2332169 bytes_retransmit=9 bytes_invalid=0 send_seq=131936 receive_seq=131936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.574 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1312045 sysload=0.11 cputime=312.412 memavail=1627568 print_time=5776.920 buffer_time=2.104 print_stall=10 extruder: target=215 temp=215.1 pwm=0.486
Stats 5767.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000058 bytes_write=4913232 bytes_read=2332611 bytes_retransmit=9 bytes_invalid=0 send_seq=131961 receive_seq=131961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=1312698 sysload=0.10 cputime=312.479 memavail=1627584 print_time=5778.063 buffer_time=2.247 print_stall=10 extruder: target=215 temp=215.0 pwm=0.497
Stats 5768.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000058 bytes_write=4915124 bytes_read=2333112 bytes_retransmit=9 bytes_invalid=0 send_seq=132001 receive_seq=132001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=1314282 sysload=0.10 cputime=312.555 memavail=1627580 print_time=5779.100 buffer_time=2.283 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 5769.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=4916556 bytes_read=2333579 bytes_retransmit=9 bytes_invalid=0 send_seq=132034 receive_seq=132034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=1315913 sysload=0.10 cputime=312.603 memavail=1628304 print_time=5779.823 buffer_time=2.005 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 5770.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=4918624 bytes_read=2334111 bytes_retransmit=9 bytes_invalid=0 send_seq=132077 receive_seq=132077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=1316736 sysload=0.10 cputime=312.682 memavail=1627820 print_time=5780.957 buffer_time=2.139 print_stall=10 extruder: target=215 temp=214.8 pwm=0.534
Stats 5771.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=4919885 bytes_read=2334567 bytes_retransmit=9 bytes_invalid=0 send_seq=132108 receive_seq=132108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=1317424 sysload=0.10 cputime=312.752 memavail=1627844 print_time=5782.009 buffer_time=2.190 print_stall=10 extruder: target=215 temp=214.7 pwm=0.541
Stats 5772.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=4920927 bytes_read=2334989 bytes_retransmit=9 bytes_invalid=0 send_seq=132135 receive_seq=132135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=1318145 sysload=0.09 cputime=312.820 memavail=1627820 print_time=5782.882 buffer_time=2.062 print_stall=10 extruder: target=215 temp=214.7 pwm=0.535
Stats 5773.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4922219 bytes_read=2335481 bytes_retransmit=9 bytes_invalid=0 send_seq=132167 receive_seq=132167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1318749 sysload=0.09 cputime=312.892 memavail=1627816 print_time=5784.395 buffer_time=2.570 print_stall=10 extruder: target=215 temp=214.8 pwm=0.499
Stats 5774.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4922850 bytes_read=2335882 bytes_retransmit=9 bytes_invalid=0 send_seq=132187 receive_seq=132187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=1319063 sysload=0.09 cputime=312.955 memavail=1628016 print_time=5784.993 buffer_time=2.169 print_stall=10 extruder: target=215 temp=214.9 pwm=0.499
Stats 5775.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4923739 bytes_read=2336284 bytes_retransmit=9 bytes_invalid=0 send_seq=132210 receive_seq=132210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1319752 sysload=0.09 cputime=313.021 memavail=1627816 print_time=5785.920 buffer_time=2.095 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 5776.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4924385 bytes_read=2336696 bytes_retransmit=9 bytes_invalid=0 send_seq=132229 receive_seq=132229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1320039 sysload=0.09 cputime=313.081 memavail=1627500 print_time=5786.873 buffer_time=2.047 print_stall=10 extruder: target=215 temp=214.9 pwm=0.484
Stats 5777.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4925759 bytes_read=2337147 bytes_retransmit=9 bytes_invalid=0 send_seq=132261 receive_seq=132261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=1320636 sysload=0.08 cputime=313.149 memavail=1627508 print_time=5788.761 buffer_time=2.935 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 5778.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4926441 bytes_read=2337528 bytes_retransmit=9 bytes_invalid=0 send_seq=132282 receive_seq=132282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=1320778 sysload=0.08 cputime=313.205 memavail=1627516 print_time=5788.984 buffer_time=2.157 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 5779.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4927811 bytes_read=2338003 bytes_retransmit=9 bytes_invalid=0 send_seq=132313 receive_seq=132313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=1321092 sysload=0.08 cputime=313.269 memavail=1627744 print_time=5789.894 buffer_time=2.066 print_stall=10 extruder: target=215 temp=215.1 pwm=0.505
Stats 5780.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4929010 bytes_read=2338438 bytes_retransmit=9 bytes_invalid=0 send_seq=132342 receive_seq=132342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.038 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=1321264 sysload=0.08 cputime=313.333 memavail=1627712 print_time=5790.920 buffer_time=2.091 print_stall=10 extruder: target=215 temp=215.2 pwm=0.421
Stats 5781.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4930483 bytes_read=2338900 bytes_retransmit=9 bytes_invalid=0 send_seq=132377 receive_seq=132377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.480 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=1321579 sysload=0.08 cputime=313.397 memavail=1627732 print_time=5792.056 buffer_time=2.226 print_stall=10 extruder: target=215 temp=215.1 pwm=0.505
Stats 5782.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4932087 bytes_read=2339402 bytes_retransmit=9 bytes_invalid=0 send_seq=132414 receive_seq=132414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=1321838 sysload=0.08 cputime=313.461 memavail=1627456 print_time=5792.943 buffer_time=2.113 print_stall=10 extruder: target=215 temp=215.2 pwm=0.388
Stats 5783.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4935078 bytes_read=2340003 bytes_retransmit=9 bytes_invalid=0 send_seq=132474 receive_seq=132474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=1323119 sysload=0.08 cputime=313.544 memavail=1627464 print_time=5794.107 buffer_time=2.277 print_stall=10 extruder: target=215 temp=215.1 pwm=0.494
Stats 5784.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=4936275 bytes_read=2340460 bytes_retransmit=9 bytes_invalid=0 send_seq=132505 receive_seq=132505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=1323512 sysload=0.08 cputime=313.609 memavail=1627432 print_time=5794.841 buffer_time=2.010 print_stall=10 extruder: target=215 temp=215.0 pwm=0.626
Stats 5785.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=4937758 bytes_read=2340957 bytes_retransmit=9 bytes_invalid=0 send_seq=132541 receive_seq=132541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=1324322 sysload=0.08 cputime=313.681 memavail=1627168 print_time=5795.960 buffer_time=2.128 print_stall=10 extruder: target=215 temp=215.1 pwm=0.513
Stats 5786.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=4939318 bytes_read=2341433 bytes_retransmit=9 bytes_invalid=0 send_seq=132576 receive_seq=132576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=1324956 sysload=0.08 cputime=313.749 memavail=1627392 print_time=5797.017 buffer_time=2.185 print_stall=10 extruder: target=215 temp=215.3 pwm=0.504
Stats 5787.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=4940360 bytes_read=2341850 bytes_retransmit=9 bytes_invalid=0 send_seq=132602 receive_seq=132602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.084 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=1325463 sysload=0.07 cputime=313.815 memavail=1627608 print_time=5797.853 buffer_time=2.020 print_stall=10 extruder: target=215 temp=215.1 pwm=0.599
Stats 5788.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=4940980 bytes_read=2342272 bytes_retransmit=9 bytes_invalid=0 send_seq=132623 receive_seq=132623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=1325583 sysload=0.07 cputime=313.876 memavail=1627496 print_time=5799.142 buffer_time=2.309 print_stall=10 extruder: target=215 temp=215.1 pwm=0.527
Stats 5789.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=4941625 bytes_read=2342693 bytes_retransmit=9 bytes_invalid=0 send_seq=132644 receive_seq=132644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1326022 sysload=0.07 cputime=313.939 memavail=1628288 print_time=5800.122 buffer_time=2.288 print_stall=10 extruder: target=215 temp=215.1 pwm=0.425
Stats 5790.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=4942468 bytes_read=2343095 bytes_retransmit=9 bytes_invalid=0 send_seq=132667 receive_seq=132667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.487 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1326678 sysload=0.07 cputime=314.007 memavail=1628544 print_time=5801.203 buffer_time=2.369 print_stall=10 extruder: target=215 temp=215.0 pwm=0.518
Stats 5791.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=4943148 bytes_read=2343512 bytes_retransmit=9 bytes_invalid=0 send_seq=132687 receive_seq=132687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=1327273 sysload=0.07 cputime=314.074 memavail=1627916 print_time=5802.022 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.9 pwm=0.611
Stats 5792.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=4943986 bytes_read=2343933 bytes_retransmit=9 bytes_invalid=0 send_seq=132711 receive_seq=132711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1327838 sysload=0.06 cputime=314.141 memavail=1627732 print_time=5802.861 buffer_time=2.026 print_stall=10 extruder: target=215 temp=214.8 pwm=0.527
Stats 5793.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=4946156 bytes_read=2344450 bytes_retransmit=9 bytes_invalid=0 send_seq=132757 receive_seq=132757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=1329154 sysload=0.06 cputime=314.224 memavail=1627764 print_time=5803.988 buffer_time=2.152 print_stall=10 extruder: target=215 temp=214.8 pwm=0.566
Stats 5794.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=4948183 bytes_read=2345002 bytes_retransmit=9 bytes_invalid=0 send_seq=132801 receive_seq=132801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.454 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=1331167 sysload=0.06 cputime=314.312 memavail=1627472 print_time=5805.181 buffer_time=2.344 print_stall=10 extruder: target=215 temp=215.1 pwm=0.359
Stats 5795.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=4949673 bytes_read=2345468 bytes_retransmit=9 bytes_invalid=0 send_seq=132834 receive_seq=132834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=1332000 sysload=0.06 cputime=314.383 memavail=1627212 print_time=5806.047 buffer_time=2.210 print_stall=10 extruder: target=215 temp=214.9 pwm=0.462
Stats 5796.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=4950925 bytes_read=2345910 bytes_retransmit=9 bytes_invalid=0 send_seq=132865 receive_seq=132865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1332572 sysload=0.06 cputime=314.447 memavail=1626720 print_time=5807.046 buffer_time=2.208 print_stall=10 extruder: target=215 temp=214.8 pwm=0.551
Stats 5797.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=4952015 bytes_read=2346367 bytes_retransmit=9 bytes_invalid=0 send_seq=132893 receive_seq=132893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=1333293 sysload=0.06 cputime=314.521 memavail=1627248 print_time=5807.919 buffer_time=2.081 print_stall=10 extruder: target=215 temp=214.7 pwm=0.628
Stats 5798.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=4952984 bytes_read=2346798 bytes_retransmit=9 bytes_invalid=0 send_seq=132919 receive_seq=132919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=1333697 sysload=0.06 cputime=314.586 memavail=1627536 print_time=5808.854 buffer_time=2.014 print_stall=10 extruder: target=215 temp=214.8 pwm=0.545
Stats 5799.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4954018 bytes_read=2347245 bytes_retransmit=9 bytes_invalid=0 send_seq=132948 receive_seq=132948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=1334215 sysload=0.06 cputime=314.636 memavail=1628040 print_time=5810.013 buffer_time=2.173 print_stall=10 extruder: target=215 temp=214.9 pwm=0.504
Stats 5800.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4954943 bytes_read=2347687 bytes_retransmit=9 bytes_invalid=0 send_seq=132973 receive_seq=132973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.397 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=1334903 sysload=0.06 cputime=314.708 memavail=1628036 print_time=5810.939 buffer_time=2.099 print_stall=10 extruder: target=215 temp=215.0 pwm=0.401
Stats 5801.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4955595 bytes_read=2348088 bytes_retransmit=9 bytes_invalid=0 send_seq=132993 receive_seq=132993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=1335188 sysload=0.06 cputime=314.775 memavail=1628260 print_time=5811.876 buffer_time=2.035 print_stall=10 extruder: target=215 temp=214.8 pwm=0.521
Stats 5802.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4957008 bytes_read=2348545 bytes_retransmit=9 bytes_invalid=0 send_seq=133027 receive_seq=133027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.483 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=1335778 sysload=0.05 cputime=314.841 memavail=1628000 print_time=5813.748 buffer_time=2.906 print_stall=10 extruder: target=215 temp=214.9 pwm=0.505
Stats 5803.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=4957757 bytes_read=2348972 bytes_retransmit=9 bytes_invalid=0 send_seq=133049 receive_seq=133049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=1335893 sysload=0.05 cputime=314.898 memavail=1627696 print_time=5814.009 buffer_time=2.166 print_stall=10 extruder: target=215 temp=215.2 pwm=0.290
Stats 5804.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4959329 bytes_read=2349468 bytes_retransmit=9 bytes_invalid=0 send_seq=133085 receive_seq=133085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=1336210 sysload=0.05 cputime=314.961 memavail=1627440 print_time=5815.056 buffer_time=2.213 print_stall=10 extruder: target=215 temp=215.1 pwm=0.489
Stats 5805.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4960593 bytes_read=2349910 bytes_retransmit=9 bytes_invalid=0 send_seq=133116 receive_seq=133116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=1336410 sysload=0.05 cputime=315.023 memavail=1627444 print_time=5816.142 buffer_time=2.298 print_stall=10 extruder: target=215 temp=215.0 pwm=0.569
Stats 5806.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4961799 bytes_read=2350382 bytes_retransmit=9 bytes_invalid=0 send_seq=133147 receive_seq=133147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=1336639 sysload=0.05 cputime=315.087 memavail=1627248 print_time=5817.113 buffer_time=2.268 print_stall=10 extruder: target=215 temp=215.3 pwm=0.394
Stats 5807.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4963455 bytes_read=2350878 bytes_retransmit=9 bytes_invalid=0 send_seq=133186 receive_seq=133186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=1336955 sysload=0.05 cputime=315.150 memavail=1627212 print_time=5817.973 buffer_time=2.128 print_stall=10 extruder: target=215 temp=215.1 pwm=0.556
Stats 5808.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=4966115 bytes_read=2351430 bytes_retransmit=9 bytes_invalid=0 send_seq=133239 receive_seq=133239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=1338189 sysload=0.05 cputime=315.230 memavail=1626968 print_time=5819.019 buffer_time=2.172 print_stall=10 extruder: target=215 temp=215.1 pwm=0.556
Stats 5809.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4967523 bytes_read=2351932 bytes_retransmit=9 bytes_invalid=0 send_seq=133273 receive_seq=133273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.417 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=1338793 sysload=0.05 cputime=315.285 memavail=1627972 print_time=5820.019 buffer_time=2.172 print_stall=10 extruder: target=215 temp=215.4 pwm=0.377
Stats 5810.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4968832 bytes_read=2352408 bytes_retransmit=9 bytes_invalid=0 send_seq=133308 receive_seq=133308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=1339394 sysload=0.05 cputime=315.354 memavail=1628056 print_time=5820.872 buffer_time=2.024 print_stall=10 extruder: target=215 temp=215.1 pwm=0.618
Stats 5811.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4970408 bytes_read=2352870 bytes_retransmit=9 bytes_invalid=0 send_seq=133343 receive_seq=133343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=1340028 sysload=0.05 cputime=315.424 memavail=1628036 print_time=5821.929 buffer_time=2.081 print_stall=10 extruder: target=215 temp=215.2 pwm=0.493
Stats 5812.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4971797 bytes_read=2353347 bytes_retransmit=9 bytes_invalid=0 send_seq=133375 receive_seq=133375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=1340625 sysload=0.05 cputime=315.500 memavail=1628024 print_time=5824.036 buffer_time=3.187 print_stall=10 extruder: target=215 temp=215.3 pwm=0.434
Stats 5813.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4972080 bytes_read=2353733 bytes_retransmit=9 bytes_invalid=0 send_seq=133392 receive_seq=133392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=1340625 sysload=0.05 cputime=315.554 memavail=1627480 print_time=5824.036 buffer_time=2.187 print_stall=10 extruder: target=215 temp=215.2 pwm=0.497
Stats 5814.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4972801 bytes_read=2354150 bytes_retransmit=9 bytes_invalid=0 send_seq=133415 receive_seq=133415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=1341125 sysload=0.05 cputime=315.617 memavail=1627232 print_time=5825.055 buffer_time=2.205 print_stall=10 extruder: target=215 temp=214.9 pwm=0.640
Stats 5815.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4973641 bytes_read=2354597 bytes_retransmit=9 bytes_invalid=0 send_seq=133441 receive_seq=133441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.001 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=1341635 sysload=0.05 cputime=315.681 memavail=1626980 print_time=5825.907 buffer_time=2.057 print_stall=10 extruder: target=215 temp=215.2 pwm=0.384
Stats 5816.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4974484 bytes_read=2355023 bytes_retransmit=9 bytes_invalid=0 send_seq=133466 receive_seq=133466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=1342438 sysload=0.05 cputime=315.751 memavail=1626880 print_time=5827.114 buffer_time=2.263 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 5817.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4975182 bytes_read=2355410 bytes_retransmit=9 bytes_invalid=0 send_seq=133486 receive_seq=133486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=1342912 sysload=0.04 cputime=315.795 memavail=1626672 print_time=5827.981 buffer_time=2.129 print_stall=10 extruder: target=215 temp=214.9 pwm=0.558
Stats 5818.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=4977110 bytes_read=2355932 bytes_retransmit=9 bytes_invalid=0 send_seq=133527 receive_seq=133527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1344493 sysload=0.04 cputime=315.876 memavail=1626428 print_time=5828.984 buffer_time=2.131 print_stall=10 extruder: target=215 temp=214.9 pwm=0.568
Stats 5819.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4979613 bytes_read=2356503 bytes_retransmit=9 bytes_invalid=0 send_seq=133578 receive_seq=133578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=1346379 sysload=0.04 cputime=315.937 memavail=1626424 print_time=5830.285 buffer_time=2.432 print_stall=10 extruder: target=215 temp=214.9 pwm=0.503
Stats 5820.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4980882 bytes_read=2356945 bytes_retransmit=9 bytes_invalid=0 send_seq=133609 receive_seq=133609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=1347158 sysload=0.04 cputime=316.010 memavail=1626940 print_time=5831.418 buffer_time=2.564 print_stall=10 extruder: target=215 temp=214.8 pwm=0.590
Stats 5821.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4982152 bytes_read=2357448 bytes_retransmit=9 bytes_invalid=0 send_seq=133644 receive_seq=133644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=1347528 sysload=0.04 cputime=316.079 memavail=1626940 print_time=5831.889 buffer_time=2.035 print_stall=10 extruder: target=215 temp=214.9 pwm=0.454
Stats 5822.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4983534 bytes_read=2357924 bytes_retransmit=9 bytes_invalid=0 send_seq=133679 receive_seq=133679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=1348452 sysload=0.04 cputime=316.154 memavail=1627224 print_time=5833.319 buffer_time=2.464 print_stall=10 extruder: target=215 temp=214.8 pwm=0.527
Stats 5823.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4984613 bytes_read=2358356 bytes_retransmit=9 bytes_invalid=0 send_seq=133708 receive_seq=133708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=1348855 sysload=0.04 cputime=316.217 memavail=1627444 print_time=5834.239 buffer_time=2.384 print_stall=10 extruder: target=215 temp=214.9 pwm=0.458
Stats 5824.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=4985407 bytes_read=2358813 bytes_retransmit=9 bytes_invalid=0 send_seq=133733 receive_seq=133733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=1349394 sysload=0.04 cputime=316.284 memavail=1627728 print_time=5835.110 buffer_time=2.254 print_stall=10 extruder: target=215 temp=214.8 pwm=0.532
Stats 5825.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=4986406 bytes_read=2359249 bytes_retransmit=9 bytes_invalid=0 send_seq=133760 receive_seq=133760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=1350052 sysload=0.04 cputime=316.350 memavail=1627660 print_time=5836.226 buffer_time=2.369 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 5826.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=4987909 bytes_read=2359716 bytes_retransmit=9 bytes_invalid=0 send_seq=133796 receive_seq=133796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=1350736 sysload=0.04 cputime=316.420 memavail=1628128 print_time=5838.509 buffer_time=3.651 print_stall=10 extruder: target=215 temp=215.1 pwm=0.389
Stats 5827.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=4988188 bytes_read=2360118 bytes_retransmit=9 bytes_invalid=0 send_seq=133813 receive_seq=133813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=1350736 sysload=0.03 cputime=316.474 memavail=1628092 print_time=5838.509 buffer_time=2.651 print_stall=10 extruder: target=215 temp=215.2 pwm=0.377
Stats 5828.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=4989589 bytes_read=2360594 bytes_retransmit=9 bytes_invalid=0 send_seq=133848 receive_seq=133848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=1351019 sysload=0.03 cputime=316.539 memavail=1627796 print_time=5839.114 buffer_time=2.256 print_stall=10 extruder: target=215 temp=215.2 pwm=0.407
Stats 5829.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4990667 bytes_read=2361031 bytes_retransmit=9 bytes_invalid=0 send_seq=133875 receive_seq=133875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=1351248 sysload=0.03 cputime=316.582 memavail=1627076 print_time=5839.955 buffer_time=2.096 print_stall=10 extruder: target=215 temp=215.2 pwm=0.473
Stats 5830.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4991890 bytes_read=2361508 bytes_retransmit=9 bytes_invalid=0 send_seq=133907 receive_seq=133907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.585 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=1351422 sysload=0.03 cputime=316.645 memavail=1627044 print_time=5841.033 buffer_time=2.173 print_stall=10 extruder: target=215 temp=215.2 pwm=0.475
Stats 5831.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4993507 bytes_read=2361994 bytes_retransmit=9 bytes_invalid=0 send_seq=133944 receive_seq=133944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=1351765 sysload=0.03 cputime=316.710 memavail=1626824 print_time=5842.245 buffer_time=2.385 print_stall=10 extruder: target=215 temp=215.4 pwm=0.362
Stats 5832.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=4995855 bytes_read=2362521 bytes_retransmit=9 bytes_invalid=0 send_seq=133992 receive_seq=133992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.620 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=1352995 sysload=0.03 cputime=316.783 memavail=1627296 print_time=5843.232 buffer_time=2.371 print_stall=10 extruder: target=215 temp=215.2 pwm=0.507
Stats 5833.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4998085 bytes_read=2363103 bytes_retransmit=9 bytes_invalid=0 send_seq=134042 receive_seq=134042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=1353465 sysload=0.03 cputime=316.853 memavail=1627324 print_time=5844.243 buffer_time=2.381 print_stall=10 extruder: target=215 temp=215.1 pwm=0.569
Stats 5834.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=4999043 bytes_read=2363534 bytes_retransmit=9 bytes_invalid=0 send_seq=134068 receive_seq=134068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=1354061 sysload=0.03 cputime=316.921 memavail=1627324 print_time=5845.141 buffer_time=2.278 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 5835.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5000916 bytes_read=2364021 bytes_retransmit=9 bytes_invalid=0 send_seq=134108 receive_seq=134108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=1354631 sysload=0.03 cputime=316.991 memavail=1627360 print_time=5846.061 buffer_time=2.198 print_stall=10 extruder: target=215 temp=215.0 pwm=0.619
Stats 5836.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5002138 bytes_read=2364486 bytes_retransmit=9 bytes_invalid=0 send_seq=134138 receive_seq=134138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=1355264 sysload=0.03 cputime=317.056 memavail=1627084 print_time=5847.010 buffer_time=2.147 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 5837.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5003283 bytes_read=2364916 bytes_retransmit=9 bytes_invalid=0 send_seq=134166 receive_seq=134166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1355703 sysload=0.03 cputime=317.124 memavail=1627336 print_time=5849.015 buffer_time=3.152 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 5838.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5003505 bytes_read=2365263 bytes_retransmit=9 bytes_invalid=0 send_seq=134180 receive_seq=134180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.172 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=1355703 sysload=0.03 cputime=317.177 memavail=1627336 print_time=5849.015 buffer_time=2.151 print_stall=10 extruder: target=215 temp=215.0 pwm=0.501
Stats 5839.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5004373 bytes_read=2365708 bytes_retransmit=9 bytes_invalid=0 send_seq=134205 receive_seq=134205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=1356413 sysload=0.03 cputime=317.247 memavail=1627336 print_time=5850.123 buffer_time=2.259 print_stall=10 extruder: target=215 temp=214.9 pwm=0.569
Stats 5840.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5005136 bytes_read=2366112 bytes_retransmit=9 bytes_invalid=0 send_seq=134227 receive_seq=134227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.509 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=1356921 sysload=0.03 cputime=317.314 memavail=1627840 print_time=5851.043 buffer_time=2.177 print_stall=10 extruder: target=215 temp=214.9 pwm=0.525
Stats 5841.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5005859 bytes_read=2366509 bytes_retransmit=9 bytes_invalid=0 send_seq=134249 receive_seq=134249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=1357484 sysload=0.03 cputime=317.375 memavail=1628084 print_time=5851.911 buffer_time=2.044 print_stall=10 extruder: target=215 temp=215.1 pwm=0.430
Stats 5842.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5007718 bytes_read=2367021 bytes_retransmit=9 bytes_invalid=0 send_seq=134288 receive_seq=134288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=1358960 sysload=0.03 cputime=317.457 memavail=1628092 print_time=5853.459 buffer_time=2.592 print_stall=10 extruder: target=215 temp=214.7 pwm=0.666
Stats 5843.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5008901 bytes_read=2367472 bytes_retransmit=9 bytes_invalid=0 send_seq=134318 receive_seq=134318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=1360152 sysload=0.03 cputime=317.534 memavail=1627524 print_time=5854.152 buffer_time=2.284 print_stall=10 extruder: target=215 temp=215.0 pwm=0.360
Stats 5844.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5011040 bytes_read=2367999 bytes_retransmit=9 bytes_invalid=0 send_seq=134363 receive_seq=134363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=1361461 sysload=0.03 cputime=317.610 memavail=1627556 print_time=5855.063 buffer_time=2.195 print_stall=10 extruder: target=215 temp=214.6 pwm=0.591
Stats 5845.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5012319 bytes_read=2368480 bytes_retransmit=9 bytes_invalid=0 send_seq=134393 receive_seq=134393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=1362240 sysload=0.03 cputime=317.682 memavail=1627280 print_time=5856.197 buffer_time=2.328 print_stall=10 extruder: target=215 temp=214.5 pwm=0.691
Stats 5846.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5013508 bytes_read=2368912 bytes_retransmit=9 bytes_invalid=0 send_seq=134422 receive_seq=134422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=1362898 sysload=0.03 cputime=317.753 memavail=1627576 print_time=5856.904 buffer_time=2.035 print_stall=10 extruder: target=215 temp=214.9 pwm=0.416
Stats 5847.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5014584 bytes_read=2369349 bytes_retransmit=9 bytes_invalid=0 send_seq=134452 receive_seq=134452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.425 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=1363534 sysload=0.02 cputime=317.826 memavail=1628016 print_time=5858.097 buffer_time=2.227 print_stall=10 extruder: target=215 temp=214.6 pwm=0.625
Stats 5848.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5015665 bytes_read=2369820 bytes_retransmit=9 bytes_invalid=0 send_seq=134480 receive_seq=134480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=1363938 sysload=0.02 cputime=317.889 memavail=1628048 print_time=5859.000 buffer_time=2.129 print_stall=10 extruder: target=215 temp=214.9 pwm=0.372
Stats 5849.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5016612 bytes_read=2370232 bytes_retransmit=9 bytes_invalid=0 send_seq=134504 receive_seq=134502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=1364682 sysload=0.02 cputime=317.956 memavail=1627788 print_time=5860.116 buffer_time=2.242 print_stall=10 extruder: target=215 temp=214.7 pwm=0.645
Stats 5850.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5017455 bytes_read=2370644 bytes_retransmit=9 bytes_invalid=0 send_seq=134527 receive_seq=134527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=1365141 sysload=0.02 cputime=318.020 memavail=1628040 print_time=5860.987 buffer_time=2.111 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 5851.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5019037 bytes_read=2371160 bytes_retransmit=9 bytes_invalid=0 send_seq=134564 receive_seq=134564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.013 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=1365818 sysload=0.02 cputime=318.097 memavail=1627780 print_time=5863.237 buffer_time=3.361 print_stall=10 extruder: target=215 temp=215.1 pwm=0.414
Stats 5852.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5019279 bytes_read=2371522 bytes_retransmit=9 bytes_invalid=0 send_seq=134579 receive_seq=134579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.620 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=1365818 sysload=0.02 cputime=318.189 memavail=1627580 print_time=5863.237 buffer_time=2.361 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 5853.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5020614 bytes_read=2371964 bytes_retransmit=9 bytes_invalid=0 send_seq=134610 receive_seq=134610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=1366047 sysload=0.02 cputime=318.251 memavail=1627564 print_time=5863.902 buffer_time=2.025 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 5854.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=5022298 bytes_read=2372495 bytes_retransmit=9 bytes_invalid=0 send_seq=134647 receive_seq=134647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=1366308 sysload=0.02 cputime=318.325 memavail=1627540 print_time=5864.892 buffer_time=2.015 print_stall=10 extruder: target=215 temp=215.3 pwm=0.304
Stats 5855.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=5023476 bytes_read=2372927 bytes_retransmit=9 bytes_invalid=0 send_seq=134676 receive_seq=134676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1366508 sysload=0.02 cputime=318.389 memavail=1627816 print_time=5865.973 buffer_time=2.095 print_stall=10 extruder: target=215 temp=215.4 pwm=0.262
Stats 5856.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=5024937 bytes_read=2373399 bytes_retransmit=9 bytes_invalid=0 send_seq=134710 receive_seq=134710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.209 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=1366794 sysload=0.02 cputime=318.459 memavail=1627816 print_time=5867.046 buffer_time=2.166 print_stall=10 extruder: target=215 temp=215.6 pwm=0.288
Stats 5857.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=5027131 bytes_read=2373935 bytes_retransmit=9 bytes_invalid=0 send_seq=134754 receive_seq=134754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=1368031 sysload=0.10 cputime=318.535 memavail=1627848 print_time=5867.911 buffer_time=2.031 print_stall=10 extruder: target=215 temp=215.2 pwm=0.515
Stats 5858.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=5029248 bytes_read=2374447 bytes_retransmit=9 bytes_invalid=0 send_seq=134799 receive_seq=134799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=1368475 sysload=0.10 cputime=318.606 memavail=1627980 print_time=5868.896 buffer_time=2.015 print_stall=10 extruder: target=215 temp=215.2 pwm=0.493
Stats 5859.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000058 bytes_write=5031099 bytes_read=2374959 bytes_retransmit=9 bytes_invalid=0 send_seq=134838 receive_seq=134838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.067 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=1369433 sysload=0.10 cputime=318.680 memavail=1628524 print_time=5870.361 buffer_time=2.479 print_stall=10 extruder: target=215 temp=215.1 pwm=0.615
Stats 5860.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000058 bytes_write=5032529 bytes_read=2375450 bytes_retransmit=9 bytes_invalid=0 send_seq=134873 receive_seq=134873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=1369858 sysload=0.10 cputime=318.745 memavail=1628028 print_time=5871.116 buffer_time=2.232 print_stall=10 extruder: target=215 temp=215.2 pwm=0.447
Stats 5861.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000058 bytes_write=5033515 bytes_read=2375862 bytes_retransmit=9 bytes_invalid=0 send_seq=134898 receive_seq=134898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=1370392 sysload=0.10 cputime=318.813 memavail=1628012 print_time=5871.921 buffer_time=2.037 print_stall=10 extruder: target=215 temp=215.0 pwm=0.646
Stats 5862.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000058 bytes_write=5034369 bytes_read=2376279 bytes_retransmit=9 bytes_invalid=0 send_seq=134921 receive_seq=134921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=1370724 sysload=0.09 cputime=318.876 memavail=1627776 print_time=5873.660 buffer_time=2.775 print_stall=10 extruder: target=215 temp=215.0 pwm=0.627
Stats 5863.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000058 bytes_write=5034827 bytes_read=2376690 bytes_retransmit=9 bytes_invalid=0 send_seq=134940 receive_seq=134940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.626 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=1370871 sysload=0.09 cputime=318.937 memavail=1627760 print_time=5873.925 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.0 pwm=0.516
Stats 5864.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=5035715 bytes_read=2377107 bytes_retransmit=9 bytes_invalid=0 send_seq=134963 receive_seq=134963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=1371584 sysload=0.09 cputime=319.008 memavail=1627540 print_time=5874.981 buffer_time=2.094 print_stall=10 extruder: target=215 temp=214.8 pwm=0.554
Stats 5865.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=5036364 bytes_read=2377509 bytes_retransmit=9 bytes_invalid=0 send_seq=134983 receive_seq=134983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=1372119 sysload=0.09 cputime=319.076 memavail=1627524 print_time=5875.973 buffer_time=2.086 print_stall=10 extruder: target=215 temp=214.7 pwm=0.554
Stats 5866.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=5037310 bytes_read=2377950 bytes_retransmit=9 bytes_invalid=0 send_seq=135008 receive_seq=135008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=1372889 sysload=0.09 cputime=319.148 memavail=1627524 print_time=5877.112 buffer_time=2.225 print_stall=10 extruder: target=215 temp=214.7 pwm=0.506
Stats 5867.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=5039229 bytes_read=2378442 bytes_retransmit=9 bytes_invalid=0 send_seq=135049 receive_seq=135049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.667 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=1374238 sysload=0.08 cputime=319.223 memavail=1627780 print_time=5878.190 buffer_time=2.303 print_stall=10 extruder: target=215 temp=214.6 pwm=0.571
Stats 5868.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=5041594 bytes_read=2378984 bytes_retransmit=9 bytes_invalid=0 send_seq=135097 receive_seq=135097 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.699 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=1376310 sysload=0.08 cputime=319.305 memavail=1620976 print_time=5879.521 buffer_time=2.633 print_stall=10 extruder: target=215 temp=214.6 pwm=0.568
Stats 5869.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5042380 bytes_read=2379425 bytes_retransmit=9 bytes_invalid=0 send_seq=135119 receive_seq=135119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=1376827 sysload=0.08 cputime=319.349 memavail=1613140 print_time=5879.988 buffer_time=2.100 print_stall=10 extruder: target=215 temp=215.1 pwm=0.272
Stats 5870.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5043964 bytes_read=2379887 bytes_retransmit=9 bytes_invalid=0 send_seq=135154 receive_seq=135154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=1377600 sysload=0.08 cputime=319.390 memavail=1626492 print_time=5881.240 buffer_time=2.352 print_stall=10 extruder: target=215 temp=214.7 pwm=0.533
Stats 5871.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5045036 bytes_read=2380319 bytes_retransmit=9 bytes_invalid=0 send_seq=135180 receive_seq=135180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.062 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=1378321 sysload=0.08 cputime=319.456 memavail=1626492 print_time=5882.113 buffer_time=2.224 print_stall=10 extruder: target=215 temp=215.0 pwm=0.365
Stats 5872.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5045952 bytes_read=2380765 bytes_retransmit=9 bytes_invalid=0 send_seq=135206 receive_seq=135206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.166 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=1378724 sysload=0.08 cputime=319.519 memavail=1626492 print_time=5883.043 buffer_time=2.153 print_stall=10 extruder: target=215 temp=214.6 pwm=0.600
Stats 5873.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5046991 bytes_read=2381197 bytes_retransmit=9 bytes_invalid=0 send_seq=135235 receive_seq=135235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.378 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=1379242 sysload=0.08 cputime=319.588 memavail=1626492 print_time=5884.152 buffer_time=2.262 print_stall=10 extruder: target=215 temp=214.9 pwm=0.455
Stats 5874.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=5047827 bytes_read=2381629 bytes_retransmit=9 bytes_invalid=0 send_seq=135258 receive_seq=135258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=1379843 sysload=0.08 cputime=319.657 memavail=1626740 print_time=5884.959 buffer_time=2.068 print_stall=10 extruder: target=215 temp=214.8 pwm=0.527
Stats 5875.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=5048610 bytes_read=2382065 bytes_retransmit=9 bytes_invalid=0 send_seq=135282 receive_seq=135282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1380217 sysload=0.08 cputime=319.726 memavail=1626460 print_time=5885.966 buffer_time=2.074 print_stall=10 extruder: target=215 temp=215.2 pwm=0.290
Stats 5876.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=5050022 bytes_read=2382522 bytes_retransmit=9 bytes_invalid=0 send_seq=135316 receive_seq=135316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.596 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=1380811 sysload=0.08 cputime=319.778 memavail=1626440 print_time=5887.721 buffer_time=2.828 print_stall=10 extruder: target=215 temp=214.9 pwm=0.533
Stats 5877.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=5050801 bytes_read=2382939 bytes_retransmit=9 bytes_invalid=0 send_seq=135339 receive_seq=135339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=1380953 sysload=0.07 cputime=319.839 memavail=1626920 print_time=5887.944 buffer_time=2.050 print_stall=10 extruder: target=215 temp=215.0 pwm=0.467
Stats 5878.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=5052470 bytes_read=2383445 bytes_retransmit=9 bytes_invalid=0 send_seq=135377 receive_seq=135377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=1381323 sysload=0.07 cputime=319.905 memavail=1626716 print_time=5889.167 buffer_time=2.273 print_stall=10 extruder: target=215 temp=215.2 pwm=0.328
Stats 5879.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5053694 bytes_read=2383897 bytes_retransmit=9 bytes_invalid=0 send_seq=135407 receive_seq=135407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.629 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=1381497 sysload=0.07 cputime=319.950 memavail=1626448 print_time=5890.245 buffer_time=2.350 print_stall=10 extruder: target=215 temp=214.8 pwm=0.621
Stats 5880.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5054874 bytes_read=2384344 bytes_retransmit=9 bytes_invalid=0 send_seq=135436 receive_seq=135436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1381754 sysload=0.07 cputime=320.014 memavail=1626656 print_time=5891.015 buffer_time=2.120 print_stall=10 extruder: target=215 temp=215.0 pwm=0.561
Stats 5881.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5056449 bytes_read=2384845 bytes_retransmit=9 bytes_invalid=0 send_seq=135473 receive_seq=135473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=1382013 sysload=0.07 cputime=320.062 memavail=1626704 print_time=5891.903 buffer_time=2.006 print_stall=10 extruder: target=215 temp=215.1 pwm=0.423
Stats 5882.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5059448 bytes_read=2385453 bytes_retransmit=9 bytes_invalid=0 send_seq=135535 receive_seq=135535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.445 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=1383294 sysload=0.15 cputime=320.143 memavail=1626964 print_time=5893.067 buffer_time=2.170 print_stall=10 extruder: target=215 temp=215.2 pwm=0.388
Stats 5883.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5060884 bytes_read=2385925 bytes_retransmit=9 bytes_invalid=0 send_seq=135569 receive_seq=135569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=1383898 sysload=0.15 cputime=320.218 memavail=1627232 print_time=5894.067 buffer_time=2.170 print_stall=10 extruder: target=215 temp=215.2 pwm=0.432
Stats 5884.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5062197 bytes_read=2386421 bytes_retransmit=9 bytes_invalid=0 send_seq=135602 receive_seq=135602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=1384499 sysload=0.15 cputime=320.290 memavail=1627176 print_time=5894.920 buffer_time=2.022 print_stall=10 extruder: target=215 temp=215.2 pwm=0.427
Stats 5885.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5063805 bytes_read=2386888 bytes_retransmit=9 bytes_invalid=0 send_seq=135638 receive_seq=135638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=1385131 sysload=0.15 cputime=320.362 memavail=1627184 print_time=5895.977 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.2 pwm=0.470
Stats 5886.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5065420 bytes_read=2387375 bytes_retransmit=9 bytes_invalid=0 send_seq=135675 receive_seq=135675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.228 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=1385790 sysload=0.15 cputime=320.444 memavail=1626980 print_time=5898.182 buffer_time=3.283 print_stall=10 extruder: target=215 temp=214.9 pwm=0.664
Stats 5887.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000045 bytes_write=5065678 bytes_read=2387756 bytes_retransmit=9 bytes_invalid=0 send_seq=135688 receive_seq=135688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.052 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=1385790 sysload=0.13 cputime=320.500 memavail=1627224 print_time=5898.182 buffer_time=2.282 print_stall=10 extruder: target=215 temp=215.0 pwm=0.555
Stats 5888.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=5066353 bytes_read=2388158 bytes_retransmit=9 bytes_invalid=0 send_seq=135708 receive_seq=135708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.212 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=1386349 sysload=0.13 cputime=320.569 memavail=1627476 print_time=5899.064 buffer_time=2.164 print_stall=10 extruder: target=215 temp=214.8 pwm=0.645
Stats 5889.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=5067178 bytes_read=2388580 bytes_retransmit=9 bytes_invalid=0 send_seq=135732 receive_seq=135732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.700 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=1386794 sysload=0.13 cputime=320.616 memavail=1628236 print_time=5899.958 buffer_time=2.056 print_stall=10 extruder: target=215 temp=214.8 pwm=0.646
Stats 5890.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=5068041 bytes_read=2389006 bytes_retransmit=9 bytes_invalid=0 send_seq=135754 receive_seq=135754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=1387593 sysload=0.13 cputime=320.693 memavail=1627976 print_time=5901.099 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.0 pwm=0.455
Stats 5891.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=5069314 bytes_read=2389448 bytes_retransmit=9 bytes_invalid=0 send_seq=135785 receive_seq=135785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.225 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1388257 sysload=0.13 cputime=320.762 memavail=1627728 print_time=5902.308 buffer_time=2.406 print_stall=10 extruder: target=215 temp=214.9 pwm=0.526
Stats 5892.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=5070899 bytes_read=2389925 bytes_retransmit=9 bytes_invalid=0 send_seq=135820 receive_seq=135820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.166 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=1389896 sysload=0.12 cputime=320.844 memavail=1627720 print_time=5903.051 buffer_time=2.149 print_stall=10 extruder: target=215 temp=215.0 pwm=0.460
Stats 5893.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=5072701 bytes_read=2390436 bytes_retransmit=9 bytes_invalid=0 send_seq=135859 receive_seq=135859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.8 pwm=0.928 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=1391307 sysload=0.12 cputime=320.919 memavail=1627732 print_time=5903.951 buffer_time=2.048 print_stall=10 extruder: target=215 temp=215.0 pwm=0.459
Stats 5894.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5074145 bytes_read=2390908 bytes_retransmit=9 bytes_invalid=0 send_seq=135893 receive_seq=135893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.175 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=1392113 sysload=0.12 cputime=320.994 memavail=1627480 print_time=5905.244 buffer_time=2.340 print_stall=10 extruder: target=215 temp=214.8 pwm=0.547
Stats 5895.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5075234 bytes_read=2391350 bytes_retransmit=9 bytes_invalid=0 send_seq=135921 receive_seq=135921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.2 pwm=0.006 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=1392549 sysload=0.12 cputime=321.063 memavail=1627228 print_time=5906.031 buffer_time=2.127 print_stall=10 extruder: target=215 temp=214.7 pwm=0.568
Stats 5896.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5076205 bytes_read=2391784 bytes_retransmit=9 bytes_invalid=0 send_seq=135946 receive_seq=135946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=1393124 sysload=0.12 cputime=321.133 memavail=1627228 print_time=5907.137 buffer_time=2.232 print_stall=10 extruder: target=215 temp=214.9 pwm=0.482
Stats 5897.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5077210 bytes_read=2392196 bytes_retransmit=9 bytes_invalid=0 send_seq=135973 receive_seq=135973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.256 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=1393530 sysload=0.11 cputime=321.199 memavail=1627860 print_time=5907.997 buffer_time=2.091 print_stall=10 extruder: target=215 temp=214.9 pwm=0.482
Stats 5898.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5077914 bytes_read=2392587 bytes_retransmit=9 bytes_invalid=0 send_seq=135993 receive_seq=135993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.252 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=1393816 sysload=0.11 cputime=321.265 memavail=1628120 print_time=5908.931 buffer_time=2.024 print_stall=10 extruder: target=215 temp=214.9 pwm=0.482
Stats 5899.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5078741 bytes_read=2393016 bytes_retransmit=9 bytes_invalid=0 send_seq=136015 receive_seq=136015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.170 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=1394358 sysload=0.11 cputime=321.329 memavail=1627888 print_time=5909.907 buffer_time=1.999 print_stall=10 extruder: target=215 temp=215.0 pwm=0.477
Stats 5900.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5080219 bytes_read=2393462 bytes_retransmit=9 bytes_invalid=0 send_seq=136047 receive_seq=136047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.261 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1395064 sysload=0.11 cputime=321.395 memavail=1627904 print_time=5912.113 buffer_time=3.205 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 5901.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5080433 bytes_read=2393839 bytes_retransmit=9 bytes_invalid=0 send_seq=136059 receive_seq=136059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.661 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=1395064 sysload=0.11 cputime=321.435 memavail=1627840 print_time=5912.113 buffer_time=2.204 print_stall=10 extruder: target=215 temp=215.1 pwm=0.521
Stats 5902.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5082081 bytes_read=2394320 bytes_retransmit=9 bytes_invalid=0 send_seq=136095 receive_seq=136095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=1395351 sysload=0.10 cputime=321.501 memavail=1627832 print_time=5913.035 buffer_time=2.125 print_stall=10 extruder: target=215 temp=215.0 pwm=0.545
Stats 5903.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5083484 bytes_read=2394772 bytes_retransmit=9 bytes_invalid=0 send_seq=136128 receive_seq=136128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=1395639 sysload=0.10 cputime=321.568 memavail=1627644 print_time=5914.131 buffer_time=2.220 print_stall=10 extruder: target=215 temp=215.4 pwm=0.286
Stats 5904.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=5084690 bytes_read=2395259 bytes_retransmit=9 bytes_invalid=0 send_seq=136159 receive_seq=136159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.188 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=1395840 sysload=0.10 cputime=321.634 memavail=1627588 print_time=5915.151 buffer_time=2.239 print_stall=10 extruder: target=215 temp=215.2 pwm=0.520
Stats 5905.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=5086119 bytes_read=2395725 bytes_retransmit=9 bytes_invalid=0 send_seq=136192 receive_seq=136192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.044 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=1396068 sysload=0.10 cputime=321.698 memavail=1627624 print_time=5916.056 buffer_time=2.144 print_stall=10 extruder: target=215 temp=215.0 pwm=0.567
Stats 5906.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=5088892 bytes_read=2396287 bytes_retransmit=9 bytes_invalid=0 send_seq=136247 receive_seq=136247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.532 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=1397339 sysload=0.10 cputime=321.782 memavail=1627664 print_time=5917.156 buffer_time=2.242 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 5907.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=5090556 bytes_read=2396789 bytes_retransmit=9 bytes_invalid=0 send_seq=136284 receive_seq=136284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.534 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=1397759 sysload=0.10 cputime=321.846 memavail=1627600 print_time=5917.970 buffer_time=2.056 print_stall=10 extruder: target=215 temp=215.0 pwm=0.580
Stats 5908.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000042 bytes_write=5091778 bytes_read=2397230 bytes_retransmit=9 bytes_invalid=0 send_seq=136312 receive_seq=136312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=1398467 sysload=0.10 cputime=321.914 memavail=1628128 print_time=5919.054 buffer_time=2.139 print_stall=10 extruder: target=215 temp=215.1 pwm=0.553
Stats 5909.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5093604 bytes_read=2397732 bytes_retransmit=9 bytes_invalid=0 send_seq=136352 receive_seq=136352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.601 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=1399113 sysload=0.10 cputime=321.969 memavail=1628440 print_time=5920.207 buffer_time=2.292 print_stall=10 extruder: target=215 temp=215.2 pwm=0.439
Stats 5910.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5094645 bytes_read=2398179 bytes_retransmit=9 bytes_invalid=0 send_seq=136378 receive_seq=136378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=1399680 sysload=0.10 cputime=322.035 memavail=1628436 print_time=5921.101 buffer_time=2.185 print_stall=10 extruder: target=215 temp=215.1 pwm=0.495
Stats 5911.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5095220 bytes_read=2398580 bytes_retransmit=9 bytes_invalid=0 send_seq=136398 receive_seq=136398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=1399796 sysload=0.10 cputime=322.081 memavail=1628628 print_time=5922.405 buffer_time=2.487 print_stall=10 extruder: target=215 temp=215.2 pwm=0.466
Stats 5912.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5095893 bytes_read=2398977 bytes_retransmit=9 bytes_invalid=0 send_seq=136420 receive_seq=136420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1400297 sysload=0.09 cputime=322.143 memavail=1628376 print_time=5923.247 buffer_time=2.329 print_stall=10 extruder: target=215 temp=214.9 pwm=0.609
Stats 5913.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5096655 bytes_read=2399399 bytes_retransmit=9 bytes_invalid=0 send_seq=136441 receive_seq=136441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=1400680 sysload=0.09 cputime=322.208 memavail=1628376 print_time=5924.160 buffer_time=2.242 print_stall=10 extruder: target=215 temp=215.0 pwm=0.496
Stats 5914.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5097430 bytes_read=2399820 bytes_retransmit=9 bytes_invalid=0 send_seq=136462 receive_seq=136462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=1401364 sysload=0.09 cputime=322.275 memavail=1628360 print_time=5925.336 buffer_time=2.417 print_stall=10 extruder: target=215 temp=215.0 pwm=0.470
Stats 5915.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5098638 bytes_read=2400252 bytes_retransmit=9 bytes_invalid=0 send_seq=136491 receive_seq=136491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=1402062 sysload=0.09 cputime=322.345 memavail=1628328 print_time=5926.480 buffer_time=2.560 print_stall=10 extruder: target=215 temp=214.8 pwm=0.599
Stats 5916.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5100106 bytes_read=2400744 bytes_retransmit=9 bytes_invalid=0 send_seq=136526 receive_seq=136526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=1403529 sysload=0.09 cputime=322.425 memavail=1627832 print_time=5927.231 buffer_time=2.311 print_stall=10 extruder: target=215 temp=214.7 pwm=0.616
Stats 5917.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5102220 bytes_read=2401275 bytes_retransmit=9 bytes_invalid=0 send_seq=136572 receive_seq=136572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=1404995 sysload=0.08 cputime=322.509 memavail=1627284 print_time=5928.070 buffer_time=2.150 print_stall=10 extruder: target=215 temp=214.9 pwm=0.466
Stats 5918.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5103524 bytes_read=2401712 bytes_retransmit=9 bytes_invalid=0 send_seq=136602 receive_seq=136602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.493 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=1405656 sysload=0.08 cputime=322.574 memavail=1627284 print_time=5929.307 buffer_time=2.386 print_stall=10 extruder: target=215 temp=214.8 pwm=0.539
Stats 5919.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=5104481 bytes_read=2402164 bytes_retransmit=9 bytes_invalid=0 send_seq=136626 receive_seq=136626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.201 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=1405977 sysload=0.08 cputime=322.617 memavail=1627268 print_time=5929.940 buffer_time=2.018 print_stall=10 extruder: target=215 temp=214.9 pwm=0.539
Stats 5920.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=5105523 bytes_read=2402600 bytes_retransmit=9 bytes_invalid=0 send_seq=136653 receive_seq=136653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.639 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=1406498 sysload=0.08 cputime=322.685 memavail=1627520 print_time=5931.054 buffer_time=2.131 print_stall=10 extruder: target=215 temp=215.0 pwm=0.449
Stats 5921.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=5106941 bytes_read=2403057 bytes_retransmit=9 bytes_invalid=0 send_seq=136687 receive_seq=136687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=1406946 sysload=0.08 cputime=322.747 memavail=1627528 print_time=5932.064 buffer_time=2.141 print_stall=10 extruder: target=215 temp=214.8 pwm=0.579
Stats 5922.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=5107682 bytes_read=2403484 bytes_retransmit=9 bytes_invalid=0 send_seq=136709 receive_seq=136709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.053 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=1407316 sysload=0.07 cputime=322.816 memavail=1627780 print_time=5933.080 buffer_time=2.157 print_stall=10 extruder: target=215 temp=214.9 pwm=0.506
Stats 5923.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000063 bytes_write=5108416 bytes_read=2403895 bytes_retransmit=9 bytes_invalid=0 send_seq=136731 receive_seq=136731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.661 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1407659 sysload=0.07 cputime=322.878 memavail=1628032 print_time=5933.968 buffer_time=2.044 print_stall=10 extruder: target=215 temp=214.9 pwm=0.566
Stats 5924.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5110150 bytes_read=2404387 bytes_retransmit=9 bytes_invalid=0 send_seq=136769 receive_seq=136769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=1408316 sysload=0.07 cputime=322.946 memavail=1628036 print_time=5936.158 buffer_time=3.233 print_stall=10 extruder: target=215 temp=215.0 pwm=0.507
Stats 5925.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5110329 bytes_read=2404764 bytes_retransmit=9 bytes_invalid=0 send_seq=136781 receive_seq=136781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.229 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=1408316 sysload=0.07 cputime=322.997 memavail=1627976 print_time=5936.158 buffer_time=2.233 print_stall=10 extruder: target=215 temp=215.0 pwm=0.507
Stats 5926.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5112131 bytes_read=2405255 bytes_retransmit=9 bytes_invalid=0 send_seq=136819 receive_seq=136819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=1408657 sysload=0.07 cputime=323.058 memavail=1627724 print_time=5937.100 buffer_time=2.174 print_stall=10 extruder: target=215 temp=214.9 pwm=0.608
Stats 5927.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5113308 bytes_read=2405687 bytes_retransmit=9 bytes_invalid=0 send_seq=136848 receive_seq=136848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=1408859 sysload=0.07 cputime=323.117 memavail=1627784 print_time=5938.081 buffer_time=2.154 print_stall=10 extruder: target=215 temp=215.1 pwm=0.524
Stats 5928.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5114438 bytes_read=2406149 bytes_retransmit=9 bytes_invalid=0 send_seq=136877 receive_seq=136877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1409089 sysload=0.07 cputime=323.181 memavail=1627596 print_time=5939.088 buffer_time=2.160 print_stall=10 extruder: target=215 temp=215.1 pwm=0.515
Stats 5929.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000039 bytes_write=5116057 bytes_read=2406655 bytes_retransmit=9 bytes_invalid=0 send_seq=136915 receive_seq=136915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=1409349 sysload=0.07 cputime=323.245 memavail=1627856 print_time=5939.975 buffer_time=2.046 print_stall=10 extruder: target=215 temp=215.2 pwm=0.504
Stats 5930.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000039 bytes_write=5118783 bytes_read=2407212 bytes_retransmit=9 bytes_invalid=0 send_seq=136969 receive_seq=136969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=1410550 sysload=0.07 cputime=323.321 memavail=1628072 print_time=5941.144 buffer_time=2.215 print_stall=10 extruder: target=215 temp=215.1 pwm=0.504
Stats 5931.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000039 bytes_write=5119947 bytes_read=2407679 bytes_retransmit=9 bytes_invalid=0 send_seq=136999 receive_seq=136999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=1411125 sysload=0.07 cputime=323.389 memavail=1628108 print_time=5942.054 buffer_time=2.125 print_stall=10 extruder: target=215 temp=215.1 pwm=0.593
Stats 5932.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000039 bytes_write=5122149 bytes_read=2408225 bytes_retransmit=9 bytes_invalid=0 send_seq=137048 receive_seq=137048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=1411795 sysload=0.06 cputime=323.459 memavail=1627856 print_time=5943.346 buffer_time=2.416 print_stall=10 extruder: target=215 temp=215.1 pwm=0.500
Stats 5933.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000039 bytes_write=5123228 bytes_read=2408652 bytes_retransmit=9 bytes_invalid=0 send_seq=137076 receive_seq=137076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=1412391 sysload=0.06 cputime=323.525 memavail=1627856 print_time=5944.405 buffer_time=2.474 print_stall=10 extruder: target=215 temp=215.1 pwm=0.548
Stats 5934.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=5124006 bytes_read=2409099 bytes_retransmit=9 bytes_invalid=0 send_seq=137099 receive_seq=137099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.868 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1412568 sysload=0.06 cputime=323.586 memavail=1627604 print_time=5945.738 buffer_time=2.806 print_stall=10 extruder: target=215 temp=215.0 pwm=0.548
Stats 5935.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=5124396 bytes_read=2409500 bytes_retransmit=9 bytes_invalid=0 send_seq=137119 receive_seq=137119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=1412715 sysload=0.06 cputime=323.643 memavail=1627612 print_time=5946.054 buffer_time=2.121 print_stall=10 extruder: target=215 temp=215.2 pwm=0.432
Stats 5936.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=5125286 bytes_read=2409912 bytes_retransmit=9 bytes_invalid=0 send_seq=137144 receive_seq=137144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=1413248 sysload=0.06 cputime=323.709 memavail=1627612 print_time=5947.207 buffer_time=2.274 print_stall=10 extruder: target=215 temp=215.0 pwm=0.551
Stats 5937.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=5125861 bytes_read=2410329 bytes_retransmit=9 bytes_invalid=0 send_seq=137164 receive_seq=137164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1413844 sysload=0.06 cputime=323.775 memavail=1627612 print_time=5948.084 buffer_time=2.151 print_stall=10 extruder: target=215 temp=214.8 pwm=0.662
Stats 5938.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=5126613 bytes_read=2410740 bytes_retransmit=9 bytes_invalid=0 send_seq=137186 receive_seq=137186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.428 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=1414260 sysload=0.06 cputime=323.837 memavail=1627612 print_time=5948.937 buffer_time=2.002 print_stall=10 extruder: target=215 temp=214.9 pwm=0.532
Stats 5939.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=5128208 bytes_read=2411242 bytes_retransmit=9 bytes_invalid=0 send_seq=137226 receive_seq=137226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=1415449 sysload=0.06 cputime=323.918 memavail=1627876 print_time=5950.009 buffer_time=2.073 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 5940.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=5130501 bytes_read=2411809 bytes_retransmit=9 bytes_invalid=0 send_seq=137276 receive_seq=137276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.014 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=1416796 sysload=0.06 cputime=323.992 memavail=1627624 print_time=5951.084 buffer_time=2.149 print_stall=10 extruder: target=215 temp=214.9 pwm=0.519
Stats 5941.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=5132143 bytes_read=2412300 bytes_retransmit=9 bytes_invalid=0 send_seq=137314 receive_seq=137314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.553 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=1417578 sysload=0.06 cputime=324.063 memavail=1627372 print_time=5952.513 buffer_time=2.577 print_stall=10 extruder: target=215 temp=214.9 pwm=0.519
Stats 5942.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=5133185 bytes_read=2412717 bytes_retransmit=9 bytes_invalid=0 send_seq=137340 receive_seq=137340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=1417896 sysload=0.05 cputime=324.124 memavail=1627612 print_time=5953.073 buffer_time=2.137 print_stall=10 extruder: target=215 temp=214.8 pwm=0.590
Stats 5943.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=5134202 bytes_read=2413185 bytes_retransmit=9 bytes_invalid=0 send_seq=137368 receive_seq=137368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=54.0 mcu_temp: temp=40.8 sd_pos=1418387 sysload=0.05 cputime=324.188 memavail=1627836 print_time=5954.061 buffer_time=2.123 print_stall=10 extruder: target=215 temp=214.7 pwm=0.655
Stats 5944.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5135660 bytes_read=2413681 bytes_retransmit=9 bytes_invalid=0 send_seq=137404 receive_seq=137404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=1418834 sysload=0.05 cputime=324.252 memavail=1627820 print_time=5955.013 buffer_time=2.074 print_stall=10 extruder: target=215 temp=214.7 pwm=0.617
Stats 5945.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5136511 bytes_read=2414098 bytes_retransmit=9 bytes_invalid=0 send_seq=137430 receive_seq=137430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=1419262 sysload=0.05 cputime=324.317 memavail=1627828 print_time=5956.179 buffer_time=2.237 print_stall=10 extruder: target=215 temp=214.8 pwm=0.551
Stats 5946.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5137240 bytes_read=2414530 bytes_retransmit=9 bytes_invalid=0 send_seq=137453 receive_seq=137453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.457 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=1419606 sysload=0.05 cputime=324.380 memavail=1627828 print_time=5957.128 buffer_time=2.184 print_stall=10 extruder: target=215 temp=214.9 pwm=0.442
Stats 5947.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5138730 bytes_read=2415016 bytes_retransmit=9 bytes_invalid=0 send_seq=137490 receive_seq=137490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.421 rpi: temp=54.0 mcu_temp: temp=39.9 sd_pos=1420446 sysload=0.05 cputime=324.448 memavail=1628080 print_time=5958.837 buffer_time=2.891 print_stall=10 extruder: target=215 temp=214.9 pwm=0.532
Stats 5948.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5139818 bytes_read=2415458 bytes_retransmit=9 bytes_invalid=0 send_seq=137521 receive_seq=137521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=1420630 sysload=0.05 cputime=324.507 memavail=1628080 print_time=5959.166 buffer_time=2.218 print_stall=10 extruder: target=215 temp=214.9 pwm=0.513
Stats 5949.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5141150 bytes_read=2415965 bytes_retransmit=9 bytes_invalid=0 send_seq=137556 receive_seq=137556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.7 pwm=0.985 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=1420889 sysload=0.05 cputime=324.569 memavail=1627828 print_time=5960.012 buffer_time=2.062 print_stall=10 extruder: target=215 temp=215.1 pwm=0.426
Stats 5950.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5142522 bytes_read=2416426 bytes_retransmit=9 bytes_invalid=0 send_seq=137588 receive_seq=137588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.404 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1421119 sysload=0.05 cputime=324.631 memavail=1627828 print_time=5961.278 buffer_time=2.325 print_stall=10 extruder: target=215 temp=215.2 pwm=0.401
Stats 5951.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5143972 bytes_read=2416888 bytes_retransmit=9 bytes_invalid=0 send_seq=137623 receive_seq=137623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.8 pwm=0.454 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1421401 sysload=0.05 cputime=324.694 memavail=1627780 print_time=5962.326 buffer_time=2.371 print_stall=10 extruder: target=215 temp=214.8 pwm=0.650
Stats 5952.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5146434 bytes_read=2417470 bytes_retransmit=9 bytes_invalid=0 send_seq=137676 receive_seq=137676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=1422392 sysload=0.04 cputime=324.770 memavail=1627528 print_time=5963.394 buffer_time=2.436 print_stall=10 extruder: target=215 temp=215.1 pwm=0.481
Stats 5953.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=5147807 bytes_read=2417931 bytes_retransmit=9 bytes_invalid=0 send_seq=137708 receive_seq=137708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.427 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1422819 sysload=0.04 cputime=324.834 memavail=1627276 print_time=5964.104 buffer_time=2.144 print_stall=10 extruder: target=215 temp=215.2 pwm=0.481
Stats 5954.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000041 bytes_write=5149130 bytes_read=2418403 bytes_retransmit=9 bytes_invalid=0 send_seq=137742 receive_seq=137742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1423361 sysload=0.04 cputime=324.899 memavail=1627276 print_time=5965.011 buffer_time=2.050 print_stall=10 extruder: target=215 temp=215.2 pwm=0.423
Stats 5955.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000041 bytes_write=5151153 bytes_read=2418940 bytes_retransmit=9 bytes_invalid=0 send_seq=137786 receive_seq=137786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.377 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1423906 sysload=0.04 cputime=324.974 memavail=1627396 print_time=5966.040 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.2 pwm=0.501
Stats 5956.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000041 bytes_write=5152211 bytes_read=2419371 bytes_retransmit=9 bytes_invalid=0 send_seq=137814 receive_seq=137814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.514 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=1424352 sysload=0.04 cputime=325.042 memavail=1627404 print_time=5967.833 buffer_time=2.871 print_stall=10 extruder: target=215 temp=215.2 pwm=0.490
Stats 5957.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000041 bytes_write=5152615 bytes_read=2419733 bytes_retransmit=9 bytes_invalid=0 send_seq=137831 receive_seq=137831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=1424499 sysload=0.04 cputime=325.099 memavail=1627152 print_time=5968.150 buffer_time=2.188 print_stall=10 extruder: target=215 temp=215.1 pwm=0.562
Stats 5958.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000041 bytes_write=5153471 bytes_read=2420153 bytes_retransmit=9 bytes_invalid=0 send_seq=137854 receive_seq=137854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=1425062 sysload=0.04 cputime=325.164 memavail=1627152 print_time=5969.382 buffer_time=2.419 print_stall=10 extruder: target=215 temp=215.0 pwm=0.553
Stats 5959.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5153986 bytes_read=2420556 bytes_retransmit=9 bytes_invalid=0 send_seq=137873 receive_seq=137873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1425569 sysload=0.04 cputime=325.209 memavail=1627096 print_time=5970.083 buffer_time=2.119 print_stall=10 extruder: target=215 temp=215.0 pwm=0.534
Stats 5960.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5155514 bytes_read=2421018 bytes_retransmit=9 bytes_invalid=0 send_seq=137908 receive_seq=137908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=1426887 sysload=0.04 cputime=325.286 memavail=1627096 print_time=5971.501 buffer_time=2.537 print_stall=10 extruder: target=215 temp=215.0 pwm=0.554
Stats 5961.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5156499 bytes_read=2421465 bytes_retransmit=9 bytes_invalid=0 send_seq=137934 receive_seq=137934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.415 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=1428148 sysload=0.04 cputime=325.362 memavail=1627096 print_time=5972.190 buffer_time=2.225 print_stall=10 extruder: target=215 temp=214.9 pwm=0.554
Stats 5962.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5158305 bytes_read=2421971 bytes_retransmit=9 bytes_invalid=0 send_seq=137975 receive_seq=137975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=1429246 sysload=0.04 cputime=325.433 memavail=1627104 print_time=5973.050 buffer_time=2.085 print_stall=10 extruder: target=215 temp=214.9 pwm=0.531
Stats 5963.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5159845 bytes_read=2422433 bytes_retransmit=9 bytes_invalid=0 send_seq=138010 receive_seq=138010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=1429923 sysload=0.04 cputime=325.505 memavail=1627104 print_time=5974.276 buffer_time=2.310 print_stall=10 extruder: target=215 temp=214.9 pwm=0.531
Stats 5964.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5160881 bytes_read=2422895 bytes_retransmit=9 bytes_invalid=0 send_seq=138036 receive_seq=138036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=1430610 sysload=0.04 cputime=325.578 memavail=1627356 print_time=5975.438 buffer_time=2.472 print_stall=10 extruder: target=215 temp=214.8 pwm=0.531
Stats 5965.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5162144 bytes_read=2423351 bytes_retransmit=9 bytes_invalid=0 send_seq=138067 receive_seq=138067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1431029 sysload=0.04 cputime=325.641 memavail=1627608 print_time=5976.325 buffer_time=2.358 print_stall=10 extruder: target=215 temp=214.8 pwm=0.574
Stats 5966.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5162824 bytes_read=2423743 bytes_retransmit=9 bytes_invalid=0 send_seq=138088 receive_seq=138088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.269 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=1431288 sysload=0.04 cputime=325.700 memavail=1627608 print_time=5976.994 buffer_time=2.027 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 5967.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5163657 bytes_read=2424189 bytes_retransmit=9 bytes_invalid=0 send_seq=138111 receive_seq=138111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.520 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1431801 sysload=0.03 cputime=325.766 memavail=1627608 print_time=5977.981 buffer_time=2.013 print_stall=10 extruder: target=215 temp=214.8 pwm=0.485
Stats 5968.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5165188 bytes_read=2424651 bytes_retransmit=9 bytes_invalid=0 send_seq=138146 receive_seq=138146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.591 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1432797 sysload=0.03 cputime=325.831 memavail=1627304 print_time=5979.947 buffer_time=2.979 print_stall=10 extruder: target=215 temp=214.8 pwm=0.548
Stats 5969.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5166094 bytes_read=2425088 bytes_retransmit=9 bytes_invalid=0 send_seq=138173 receive_seq=138173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.115 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1432968 sysload=0.03 cputime=325.890 memavail=1627556 print_time=5980.267 buffer_time=2.299 print_stall=10 extruder: target=215 temp=215.1 pwm=0.394
Stats 5970.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5167542 bytes_read=2425584 bytes_retransmit=9 bytes_invalid=0 send_seq=138206 receive_seq=138206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1433200 sysload=0.03 cputime=325.950 memavail=1627556 print_time=5981.099 buffer_time=2.130 print_stall=10 extruder: target=215 temp=214.9 pwm=0.576
Stats 5971.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5168671 bytes_read=2426011 bytes_retransmit=9 bytes_invalid=0 send_seq=138234 receive_seq=138234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1433401 sysload=0.03 cputime=326.013 memavail=1627812 print_time=5982.001 buffer_time=2.031 print_stall=10 extruder: target=215 temp=214.8 pwm=0.647
Stats 5972.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5170026 bytes_read=2426458 bytes_retransmit=9 bytes_invalid=0 send_seq=138266 receive_seq=138266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.044 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1433628 sysload=0.03 cputime=326.073 memavail=1627560 print_time=5983.086 buffer_time=2.116 print_stall=10 extruder: target=215 temp=214.9 pwm=0.511
Stats 5973.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=5172430 bytes_read=2427044 bytes_retransmit=9 bytes_invalid=0 send_seq=138317 receive_seq=138317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=1434618 sysload=0.03 cputime=326.146 memavail=1627808 print_time=5984.077 buffer_time=2.106 print_stall=10 extruder: target=215 temp=215.0 pwm=0.527
Stats 5974.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5174069 bytes_read=2427541 bytes_retransmit=9 bytes_invalid=0 send_seq=138356 receive_seq=138356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1435335 sysload=0.03 cputime=326.214 memavail=1627568 print_time=5985.215 buffer_time=2.244 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 5975.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5175521 bytes_read=2428008 bytes_retransmit=9 bytes_invalid=0 send_seq=138392 receive_seq=138392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=1435862 sysload=0.03 cputime=326.279 memavail=1627880 print_time=5986.076 buffer_time=2.105 print_stall=10 extruder: target=215 temp=215.0 pwm=0.486
Stats 5976.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5176895 bytes_read=2428499 bytes_retransmit=9 bytes_invalid=0 send_seq=138424 receive_seq=138424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.269 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=1436398 sysload=0.03 cputime=326.346 memavail=1627880 print_time=5987.998 buffer_time=3.026 print_stall=10 extruder: target=215 temp=215.1 pwm=0.485
Stats 5977.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5177133 bytes_read=2428861 bytes_retransmit=9 bytes_invalid=0 send_seq=138439 receive_seq=138439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1436398 sysload=0.03 cputime=326.395 memavail=1627880 print_time=5987.998 buffer_time=2.025 print_stall=10 extruder: target=215 temp=215.0 pwm=0.521
Stats 5978.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5178026 bytes_read=2429273 bytes_retransmit=9 bytes_invalid=0 send_seq=138464 receive_seq=138464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1436924 sysload=0.03 cputime=326.460 memavail=1627876 print_time=5989.053 buffer_time=2.080 print_stall=10 extruder: target=215 temp=215.2 pwm=0.375
Stats 5979.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=5178675 bytes_read=2429719 bytes_retransmit=9 bytes_invalid=0 send_seq=138484 receive_seq=138484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1437605 sysload=0.03 cputime=326.511 memavail=1627876 print_time=5990.152 buffer_time=2.178 print_stall=10 extruder: target=215 temp=215.0 pwm=0.601
Stats 5980.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=5180090 bytes_read=2430171 bytes_retransmit=9 bytes_invalid=0 send_seq=138517 receive_seq=138517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.438 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1438992 sysload=0.03 cputime=326.590 memavail=1627900 print_time=5991.407 buffer_time=2.433 print_stall=10 extruder: target=215 temp=215.0 pwm=0.515
Stats 5981.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=5181021 bytes_read=2430588 bytes_retransmit=9 bytes_invalid=0 send_seq=138543 receive_seq=138543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1440224 sysload=0.03 cputime=326.665 memavail=1627836 print_time=5992.069 buffer_time=2.095 print_stall=10 extruder: target=215 temp=214.8 pwm=0.665
Stats 5982.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=5183110 bytes_read=2431129 bytes_retransmit=9 bytes_invalid=0 send_seq=138585 receive_seq=138585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.267 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1441584 sysload=0.02 cputime=326.748 memavail=1627564 print_time=5993.166 buffer_time=2.191 print_stall=10 extruder: target=215 temp=214.8 pwm=0.587
Stats 5983.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=5184287 bytes_read=2431556 bytes_retransmit=9 bytes_invalid=0 send_seq=138613 receive_seq=138613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1442084 sysload=0.02 cputime=326.812 memavail=1627584 print_time=5994.089 buffer_time=2.113 print_stall=10 extruder: target=215 temp=214.7 pwm=0.592
Stats 5984.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5185531 bytes_read=2432013 bytes_retransmit=9 bytes_invalid=0 send_seq=138644 receive_seq=138644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.358 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=1442749 sysload=0.02 cputime=326.886 memavail=1627580 print_time=5995.202 buffer_time=2.226 print_stall=10 extruder: target=215 temp=214.9 pwm=0.523
Stats 5985.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5186911 bytes_read=2432504 bytes_retransmit=9 bytes_invalid=0 send_seq=138676 receive_seq=138676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=1443311 sysload=0.02 cputime=326.953 memavail=1627644 print_time=5996.239 buffer_time=2.262 print_stall=10 extruder: target=215 temp=214.8 pwm=0.567
Stats 5986.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5187677 bytes_read=2432896 bytes_retransmit=9 bytes_invalid=0 send_seq=138697 receive_seq=138697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=1443740 sysload=0.02 cputime=327.013 memavail=1627460 print_time=5997.045 buffer_time=2.067 print_stall=10 extruder: target=215 temp=214.9 pwm=0.491
Stats 5987.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5189663 bytes_read=2433413 bytes_retransmit=9 bytes_invalid=0 send_seq=138740 receive_seq=138740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1444699 sysload=0.02 cputime=327.088 memavail=1627964 print_time=5999.428 buffer_time=3.450 print_stall=10 extruder: target=215 temp=215.1 pwm=0.367
Stats 5988.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5189904 bytes_read=2433804 bytes_retransmit=9 bytes_invalid=0 send_seq=138755 receive_seq=138755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.636 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1444699 sysload=0.02 cputime=327.143 memavail=1628216 print_time=5999.428 buffer_time=2.450 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 5989.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=5191430 bytes_read=2434286 bytes_retransmit=9 bytes_invalid=0 send_seq=138791 receive_seq=138791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1444958 sysload=0.02 cputime=327.187 memavail=1628216 print_time=6000.142 buffer_time=2.163 print_stall=10 extruder: target=215 temp=215.1 pwm=0.487
Stats 5990.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=5192806 bytes_read=2434723 bytes_retransmit=9 bytes_invalid=0 send_seq=138822 receive_seq=138818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=10 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1445216 sysload=0.02 cputime=327.253 memavail=1628220 print_time=6001.284 buffer_time=2.305 print_stall=10 extruder: target=215 temp=214.9 pwm=0.604
Stats 5991.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=5193993 bytes_read=2435199 bytes_retransmit=9 bytes_invalid=0 send_seq=138850 receive_seq=138850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.363 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1445390 sysload=0.02 cputime=327.312 memavail=1627976 print_time=6002.109 buffer_time=2.130 print_stall=10 extruder: target=215 temp=214.9 pwm=0.567
Stats 5992.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=5196649 bytes_read=2435751 bytes_retransmit=9 bytes_invalid=0 send_seq=138903 receive_seq=138903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1446219 sysload=0.02 cputime=327.384 memavail=1627976 print_time=6003.394 buffer_time=2.414 print_stall=10 extruder: target=215 temp=215.0 pwm=0.500
Stats 5993.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=5197618 bytes_read=2436183 bytes_retransmit=9 bytes_invalid=0 send_seq=138929 receive_seq=138929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1446716 sysload=0.02 cputime=327.446 memavail=1627976 print_time=6004.104 buffer_time=2.124 print_stall=10 extruder: target=215 temp=215.1 pwm=0.510
Stats 5994.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=5198780 bytes_read=2436644 bytes_retransmit=9 bytes_invalid=0 send_seq=138955 receive_seq=138955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=1447286 sysload=0.02 cputime=327.512 memavail=1628008 print_time=6005.081 buffer_time=2.101 print_stall=10 extruder: target=215 temp=215.2 pwm=0.410
Stats 5995.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=5199470 bytes_read=2437046 bytes_retransmit=9 bytes_invalid=0 send_seq=138978 receive_seq=138978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=1447464 sysload=0.02 cputime=327.573 memavail=1627944 print_time=6006.284 buffer_time=2.303 print_stall=10 extruder: target=215 temp=215.0 pwm=0.533
Stats 5996.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=5200279 bytes_read=2437463 bytes_retransmit=9 bytes_invalid=0 send_seq=139001 receive_seq=139001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=1447997 sysload=0.02 cputime=327.639 memavail=1628260 print_time=6007.203 buffer_time=2.221 print_stall=10 extruder: target=215 temp=215.2 pwm=0.467
Stats 5997.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=5200938 bytes_read=2437884 bytes_retransmit=9 bytes_invalid=0 send_seq=139022 receive_seq=139022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1448535 sysload=0.02 cputime=327.705 memavail=1628300 print_time=6008.112 buffer_time=2.129 print_stall=10 extruder: target=215 temp=215.1 pwm=0.554
Stats 5998.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=5202328 bytes_read=2438336 bytes_retransmit=9 bytes_invalid=0 send_seq=139055 receive_seq=139055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=1449528 sysload=0.02 cputime=327.777 memavail=1628212 print_time=6009.487 buffer_time=2.504 print_stall=10 extruder: target=215 temp=215.0 pwm=0.596
Stats 5999.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=5203522 bytes_read=2438803 bytes_retransmit=9 bytes_invalid=0 send_seq=139085 receive_seq=139085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.8 pwm=0.632 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=1450337 sysload=0.02 cputime=327.845 memavail=1626916 print_time=6010.017 buffer_time=2.033 print_stall=10 extruder: target=215 temp=215.2 pwm=0.379
Stats 6000.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=5206059 bytes_read=2439374 bytes_retransmit=9 bytes_invalid=0 send_seq=139136 receive_seq=139136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=1451786 sysload=0.02 cputime=327.923 memavail=1626864 print_time=6011.114 buffer_time=2.130 print_stall=10 extruder: target=215 temp=215.1 pwm=0.479
Stats 6001.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=5207347 bytes_read=2439816 bytes_retransmit=9 bytes_invalid=0 send_seq=139167 receive_seq=139167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.396 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=1452682 sysload=0.02 cputime=327.999 memavail=1627124 print_time=6012.355 buffer_time=2.370 print_stall=10 extruder: target=215 temp=214.9 pwm=0.557
Stats 6002.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=5208685 bytes_read=2440283 bytes_retransmit=9 bytes_invalid=0 send_seq=139200 receive_seq=139200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1453423 sysload=0.02 cputime=328.069 memavail=1627124 print_time=6013.684 buffer_time=2.699 print_stall=10 extruder: target=215 temp=215.1 pwm=0.423
Stats 6003.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=5209325 bytes_read=2440704 bytes_retransmit=9 bytes_invalid=0 send_seq=139221 receive_seq=139221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.635 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1453738 sysload=0.02 cputime=328.131 memavail=1626820 print_time=6014.261 buffer_time=2.275 print_stall=10 extruder: target=215 temp=215.0 pwm=0.548
Stats 6004.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=5210135 bytes_read=2441147 bytes_retransmit=9 bytes_invalid=0 send_seq=139247 receive_seq=139247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.457 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=1454249 sysload=0.02 cputime=328.199 memavail=1627080 print_time=6015.136 buffer_time=2.149 print_stall=10 extruder: target=215 temp=215.1 pwm=0.426
Stats 6005.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=5211539 bytes_read=2441614 bytes_retransmit=9 bytes_invalid=0 send_seq=139280 receive_seq=139280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.506 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=1454667 sysload=0.02 cputime=328.263 memavail=1627080 print_time=6016.967 buffer_time=2.980 print_stall=10 extruder: target=215 temp=214.8 pwm=0.604
Stats 6006.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=5212322 bytes_read=2442045 bytes_retransmit=9 bytes_invalid=0 send_seq=139303 receive_seq=139303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.074 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1454808 sysload=0.02 cputime=328.319 memavail=1627136 print_time=6017.303 buffer_time=2.314 print_stall=10 extruder: target=215 temp=214.8 pwm=0.594
Stats 6007.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=5213510 bytes_read=2442477 bytes_retransmit=9 bytes_invalid=0 send_seq=139332 receive_seq=139332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.507 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1454979 sysload=0.02 cputime=328.379 memavail=1627388 print_time=6018.075 buffer_time=2.085 print_stall=10 extruder: target=215 temp=214.9 pwm=0.474
Stats 6008.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=5215270 bytes_read=2442979 bytes_retransmit=9 bytes_invalid=0 send_seq=139372 receive_seq=139372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.259 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=1455323 sysload=0.02 cputime=328.444 memavail=1627396 print_time=6019.384 buffer_time=2.394 print_stall=10 extruder: target=215 temp=215.0 pwm=0.519
Stats 6009.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5217161 bytes_read=2443525 bytes_retransmit=9 bytes_invalid=0 send_seq=139415 receive_seq=139415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.335 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1455741 sysload=0.02 cputime=328.489 memavail=1627024 print_time=6020.207 buffer_time=2.216 print_stall=10 extruder: target=215 temp=214.8 pwm=0.653
Stats 6010.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5218196 bytes_read=2443942 bytes_retransmit=9 bytes_invalid=0 send_seq=139441 receive_seq=139441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.164 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=1456357 sysload=0.02 cputime=328.557 memavail=1627268 print_time=6021.091 buffer_time=2.099 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 6011.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5219485 bytes_read=2444399 bytes_retransmit=9 bytes_invalid=0 send_seq=139472 receive_seq=139472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1456837 sysload=0.02 cputime=328.628 memavail=1627596 print_time=6023.032 buffer_time=3.040 print_stall=10 extruder: target=215 temp=215.1 pwm=0.454
Stats 6012.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5219698 bytes_read=2444785 bytes_retransmit=9 bytes_invalid=0 send_seq=139486 receive_seq=139486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.182 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=1456837 sysload=0.01 cputime=328.679 memavail=1627284 print_time=6023.032 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.1 pwm=0.454
Stats 6013.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5220487 bytes_read=2445182 bytes_retransmit=9 bytes_invalid=0 send_seq=139508 receive_seq=139508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=1457429 sysload=0.01 cputime=328.746 memavail=1627288 print_time=6024.175 buffer_time=2.181 print_stall=10 extruder: target=215 temp=215.1 pwm=0.457
Stats 6014.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5221376 bytes_read=2445609 bytes_retransmit=9 bytes_invalid=0 send_seq=139530 receive_seq=139530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1458171 sysload=0.01 cputime=328.819 memavail=1627288 print_time=6025.322 buffer_time=2.328 print_stall=10 extruder: target=215 temp=215.1 pwm=0.427
Stats 6015.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5223272 bytes_read=2446126 bytes_retransmit=9 bytes_invalid=0 send_seq=139571 receive_seq=139571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.407 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=1459446 sysload=0.01 cputime=328.895 memavail=1627720 print_time=6026.545 buffer_time=2.550 print_stall=10 extruder: target=215 temp=215.0 pwm=0.571
Stats 6016.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5224369 bytes_read=2446548 bytes_retransmit=9 bytes_invalid=0 send_seq=139600 receive_seq=139600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.626 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1460250 sysload=0.01 cputime=328.960 memavail=1627476 print_time=6027.187 buffer_time=2.191 print_stall=10 extruder: target=215 temp=214.9 pwm=0.633
Stats 6017.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5225328 bytes_read=2446969 bytes_retransmit=9 bytes_invalid=0 send_seq=139626 receive_seq=139626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=1460771 sysload=0.01 cputime=329.029 memavail=1627164 print_time=6028.112 buffer_time=2.116 print_stall=10 extruder: target=215 temp=214.9 pwm=0.540
Stats 6018.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5226698 bytes_read=2447438 bytes_retransmit=9 bytes_invalid=0 send_seq=139659 receive_seq=139659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1461369 sysload=0.01 cputime=329.098 memavail=1627416 print_time=6029.383 buffer_time=2.386 print_stall=10 extruder: target=215 temp=214.9 pwm=0.604
Stats 6019.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5227430 bytes_read=2447842 bytes_retransmit=9 bytes_invalid=0 send_seq=139680 receive_seq=139680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.020 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=1461739 sysload=0.01 cputime=329.159 memavail=1627164 print_time=6030.154 buffer_time=2.157 print_stall=10 extruder: target=215 temp=214.9 pwm=0.558
Stats 6020.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5228473 bytes_read=2448274 bytes_retransmit=9 bytes_invalid=0 send_seq=139706 receive_seq=139706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.041 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=1462139 sysload=0.01 cputime=329.228 memavail=1627416 print_time=6031.034 buffer_time=2.036 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 6021.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5229795 bytes_read=2448755 bytes_retransmit=9 bytes_invalid=0 send_seq=139739 receive_seq=139739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=1462443 sysload=0.01 cputime=329.291 memavail=1627308 print_time=6032.434 buffer_time=2.436 print_stall=10 extruder: target=215 temp=215.0 pwm=0.447
Stats 6022.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5231167 bytes_read=2449212 bytes_retransmit=9 bytes_invalid=0 send_seq=139773 receive_seq=139773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.550 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=1462699 sysload=0.01 cputime=329.355 memavail=1627056 print_time=6033.230 buffer_time=2.231 print_stall=10 extruder: target=215 temp=214.9 pwm=0.575
Stats 6023.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5232276 bytes_read=2449649 bytes_retransmit=9 bytes_invalid=0 send_seq=139800 receive_seq=139800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.623 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1462902 sysload=0.01 cputime=329.425 memavail=1628124 print_time=6034.026 buffer_time=2.027 print_stall=10 extruder: target=215 temp=215.0 pwm=0.470
Stats 6024.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=5234724 bytes_read=2450235 bytes_retransmit=9 bytes_invalid=0 send_seq=139851 receive_seq=139851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=1463459 sysload=0.01 cputime=329.485 memavail=1628212 print_time=6035.343 buffer_time=2.342 print_stall=10 extruder: target=215 temp=215.1 pwm=0.482
Stats 6025.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=5235531 bytes_read=2450637 bytes_retransmit=9 bytes_invalid=0 send_seq=139874 receive_seq=139874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=1463896 sysload=0.01 cputime=329.548 memavail=1628212 print_time=6036.095 buffer_time=2.094 print_stall=10 extruder: target=215 temp=215.2 pwm=0.364
Stats 6026.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=5237030 bytes_read=2451109 bytes_retransmit=9 bytes_invalid=0 send_seq=139908 receive_seq=139908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1464492 sysload=0.01 cputime=329.618 memavail=1628216 print_time=6038.159 buffer_time=3.158 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 6027.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=5237244 bytes_read=2451490 bytes_retransmit=9 bytes_invalid=0 send_seq=139921 receive_seq=139921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.438 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=1464492 sysload=0.01 cputime=329.672 memavail=1628032 print_time=6038.159 buffer_time=2.157 print_stall=10 extruder: target=215 temp=215.2 pwm=0.475
Stats 6028.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=5238036 bytes_read=2451892 bytes_retransmit=9 bytes_invalid=0 send_seq=139944 receive_seq=139944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.406 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=1464908 sysload=0.01 cputime=329.735 memavail=1628032 print_time=6039.133 buffer_time=2.131 print_stall=10 extruder: target=215 temp=215.1 pwm=0.475
Stats 6029.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5238957 bytes_read=2452329 bytes_retransmit=9 bytes_invalid=0 send_seq=139968 receive_seq=139968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1465649 sysload=0.01 cputime=329.784 memavail=1628592 print_time=6040.236 buffer_time=2.234 print_stall=10 extruder: target=215 temp=215.1 pwm=0.520
Stats 6030.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5240880 bytes_read=2452855 bytes_retransmit=9 bytes_invalid=0 send_seq=140010 receive_seq=140010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.512 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=1466743 sysload=0.01 cputime=329.859 memavail=1628336 print_time=6041.376 buffer_time=2.373 print_stall=10 extruder: target=215 temp=215.2 pwm=0.453
Stats 6031.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5241974 bytes_read=2453277 bytes_retransmit=9 bytes_invalid=0 send_seq=140037 receive_seq=140037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1467545 sysload=0.01 cputime=329.925 memavail=1628588 print_time=6042.010 buffer_time=2.006 print_stall=10 extruder: target=215 temp=215.1 pwm=0.522
Stats 6032.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5243161 bytes_read=2453724 bytes_retransmit=9 bytes_invalid=0 send_seq=140066 receive_seq=140066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1468268 sysload=0.01 cputime=329.999 memavail=1628592 print_time=6043.189 buffer_time=2.184 print_stall=10 extruder: target=215 temp=215.0 pwm=0.574
Stats 6033.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=5244177 bytes_read=2454170 bytes_retransmit=9 bytes_invalid=0 send_seq=140092 receive_seq=140092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.496 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1468782 sysload=0.01 cputime=330.068 memavail=1628600 print_time=6044.052 buffer_time=2.046 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 6034.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=5245082 bytes_read=2454592 bytes_retransmit=9 bytes_invalid=0 send_seq=140116 receive_seq=140116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1469499 sysload=0.01 cputime=330.140 memavail=1628096 print_time=6045.149 buffer_time=2.143 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 6035.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=5246356 bytes_read=2455034 bytes_retransmit=9 bytes_invalid=0 send_seq=140144 receive_seq=140144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=1469887 sysload=0.01 cputime=330.207 memavail=1628096 print_time=6046.807 buffer_time=2.801 print_stall=10 extruder: target=215 temp=214.9 pwm=0.599
Stats 6036.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=5247165 bytes_read=2455475 bytes_retransmit=9 bytes_invalid=0 send_seq=140169 receive_seq=140169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1470001 sysload=0.01 cputime=330.267 memavail=1628096 print_time=6047.073 buffer_time=2.066 print_stall=10 extruder: target=215 temp=214.9 pwm=0.515
Stats 6037.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=5248824 bytes_read=2455947 bytes_retransmit=9 bytes_invalid=0 send_seq=140206 receive_seq=140206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.8 pwm=0.803 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1470399 sysload=0.01 cputime=330.332 memavail=1627844 print_time=6048.246 buffer_time=2.238 print_stall=10 extruder: target=215 temp=214.9 pwm=0.545
Stats 6038.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=5250501 bytes_read=2456444 bytes_retransmit=9 bytes_invalid=0 send_seq=140242 receive_seq=140242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.8 pwm=0.472 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=1470716 sysload=0.01 cputime=330.400 memavail=1627972 print_time=6049.126 buffer_time=2.117 print_stall=10 extruder: target=215 temp=215.0 pwm=0.436
Stats 6039.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000041 bytes_write=5252086 bytes_read=2456945 bytes_retransmit=9 bytes_invalid=0 send_seq=140279 receive_seq=140279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=1471429 sysload=0.01 cputime=330.472 memavail=1627728 print_time=6050.156 buffer_time=2.146 print_stall=10 extruder: target=215 temp=214.9 pwm=0.473
Stats 6040.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000041 bytes_write=5253578 bytes_read=2457402 bytes_retransmit=9 bytes_invalid=0 send_seq=140313 receive_seq=140313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.396 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1472057 sysload=0.01 cputime=330.545 memavail=1627736 print_time=6052.147 buffer_time=3.137 print_stall=10 extruder: target=215 temp=215.0 pwm=0.503
Stats 6041.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000041 bytes_write=5253781 bytes_read=2457779 bytes_retransmit=9 bytes_invalid=0 send_seq=140325 receive_seq=140325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1472057 sysload=0.01 cputime=330.597 memavail=1627736 print_time=6052.147 buffer_time=2.136 print_stall=10 extruder: target=215 temp=215.2 pwm=0.406
Stats 6042.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000041 bytes_write=5254571 bytes_read=2458190 bytes_retransmit=9 bytes_invalid=0 send_seq=140347 receive_seq=140347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.111 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1472531 sysload=0.01 cputime=330.641 memavail=1627424 print_time=6053.047 buffer_time=2.035 print_stall=10 extruder: target=215 temp=214.9 pwm=0.581
Stats 6043.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5256118 bytes_read=2458672 bytes_retransmit=9 bytes_invalid=0 send_seq=140383 receive_seq=140383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1473854 sysload=0.01 cputime=330.726 memavail=1627424 print_time=6054.565 buffer_time=2.552 print_stall=10 extruder: target=215 temp=214.9 pwm=0.586
Stats 6044.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5257169 bytes_read=2459119 bytes_retransmit=9 bytes_invalid=0 send_seq=140409 receive_seq=140409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=1474624 sysload=0.01 cputime=330.793 memavail=1627176 print_time=6055.018 buffer_time=2.004 print_stall=10 extruder: target=215 temp=215.1 pwm=0.519
Stats 6045.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5258838 bytes_read=2459610 bytes_retransmit=9 bytes_invalid=0 send_seq=140447 receive_seq=140447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.8 pwm=0.713 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1475620 sysload=0.01 cputime=330.868 memavail=1627176 print_time=6056.445 buffer_time=2.431 print_stall=10 extruder: target=215 temp=214.9 pwm=0.592
Stats 6046.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5260155 bytes_read=2460047 bytes_retransmit=9 bytes_invalid=0 send_seq=140477 receive_seq=140477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.012 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1476303 sysload=0.01 cputime=330.938 memavail=1627176 print_time=6057.566 buffer_time=2.551 print_stall=10 extruder: target=215 temp=215.0 pwm=0.491
Stats 6047.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5260703 bytes_read=2460459 bytes_retransmit=9 bytes_invalid=0 send_seq=140496 receive_seq=140496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1476643 sysload=0.01 cputime=331.002 memavail=1627156 print_time=6058.064 buffer_time=2.049 print_stall=10 extruder: target=215 temp=214.9 pwm=0.542
Stats 6048.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000048 bytes_write=5262423 bytes_read=2460945 bytes_retransmit=9 bytes_invalid=0 send_seq=140533 receive_seq=140533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1477377 sysload=0.01 cputime=331.076 memavail=1627156 print_time=6060.113 buffer_time=3.098 print_stall=10 extruder: target=215 temp=214.9 pwm=0.611
Stats 6049.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5262626 bytes_read=2461307 bytes_retransmit=9 bytes_invalid=0 send_seq=140545 receive_seq=140545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1477377 sysload=0.01 cputime=331.119 memavail=1627432 print_time=6060.113 buffer_time=2.097 print_stall=10 extruder: target=215 temp=214.9 pwm=0.509
Stats 6050.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5264538 bytes_read=2461829 bytes_retransmit=9 bytes_invalid=0 send_seq=140586 receive_seq=140586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1477835 sysload=0.01 cputime=331.189 memavail=1627180 print_time=6061.264 buffer_time=2.247 print_stall=10 extruder: target=215 temp=214.9 pwm=0.509
Stats 6051.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5266075 bytes_read=2462310 bytes_retransmit=9 bytes_invalid=0 send_seq=140622 receive_seq=140622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.042 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1478182 sysload=0.01 cputime=331.259 memavail=1627192 print_time=6062.085 buffer_time=2.067 print_stall=10 extruder: target=215 temp=215.1 pwm=0.428
Stats 6052.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5267854 bytes_read=2462792 bytes_retransmit=9 bytes_invalid=0 send_seq=140661 receive_seq=140661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=1478805 sysload=0.01 cputime=331.332 memavail=1626948 print_time=6063.156 buffer_time=2.139 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 6053.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=5269185 bytes_read=2463259 bytes_retransmit=9 bytes_invalid=0 send_seq=140691 receive_seq=140691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1479480 sysload=0.01 cputime=331.405 memavail=1626948 print_time=6065.009 buffer_time=2.990 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 6054.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5269586 bytes_read=2463660 bytes_retransmit=9 bytes_invalid=0 send_seq=140708 receive_seq=140708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1479657 sysload=0.01 cputime=331.464 memavail=1627196 print_time=6065.298 buffer_time=2.279 print_stall=10 extruder: target=215 temp=215.0 pwm=0.525
Stats 6055.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5270290 bytes_read=2464052 bytes_retransmit=9 bytes_invalid=0 send_seq=140729 receive_seq=140729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1480193 sysload=0.01 cputime=331.530 memavail=1627164 print_time=6066.141 buffer_time=2.121 print_stall=10 extruder: target=215 temp=215.0 pwm=0.544
Stats 6056.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5271928 bytes_read=2464549 bytes_retransmit=9 bytes_invalid=0 send_seq=140765 receive_seq=140765 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=1481267 sysload=0.01 cputime=331.610 memavail=1627124 print_time=6067.170 buffer_time=2.148 print_stall=10 extruder: target=215 temp=215.1 pwm=0.427
Stats 6057.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5273901 bytes_read=2465050 bytes_retransmit=9 bytes_invalid=0 send_seq=140805 receive_seq=140805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.082 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1482553 sysload=0.00 cputime=331.687 memavail=1626900 print_time=6068.308 buffer_time=2.286 print_stall=10 extruder: target=215 temp=215.1 pwm=0.520
Stats 6058.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5274969 bytes_read=2465467 bytes_retransmit=9 bytes_invalid=0 send_seq=140831 receive_seq=140831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.374 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=1483052 sysload=0.00 cputime=331.760 memavail=1627336 print_time=6069.263 buffer_time=2.241 print_stall=10 extruder: target=215 temp=215.0 pwm=0.520
Stats 6059.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=5275957 bytes_read=2465929 bytes_retransmit=9 bytes_invalid=0 send_seq=140857 receive_seq=140857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1483505 sysload=0.00 cputime=331.805 memavail=1627068 print_time=6070.084 buffer_time=2.061 print_stall=10 extruder: target=215 temp=215.0 pwm=0.520
Stats 6060.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=5276856 bytes_read=2466345 bytes_retransmit=9 bytes_invalid=0 send_seq=140880 receive_seq=140880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.254 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=1484126 sysload=0.00 cputime=331.856 memavail=1626820 print_time=6071.200 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 6061.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=5277990 bytes_read=2466767 bytes_retransmit=9 bytes_invalid=0 send_seq=140908 receive_seq=140907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.8 pwm=0.553 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1484372 sysload=0.00 cputime=331.917 memavail=1626828 print_time=6072.376 buffer_time=2.351 print_stall=10 extruder: target=215 temp=215.0 pwm=0.472
Stats 6062.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=5279285 bytes_read=2467244 bytes_retransmit=9 bytes_invalid=0 send_seq=140939 receive_seq=140939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.8 pwm=0.501 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1484660 sysload=0.00 cputime=331.982 memavail=1627080 print_time=6073.123 buffer_time=2.099 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 6063.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000062 bytes_write=5281707 bytes_read=2467795 bytes_retransmit=9 bytes_invalid=0 send_seq=140989 receive_seq=140989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1485192 sysload=0.00 cputime=332.056 memavail=1627340 print_time=6074.323 buffer_time=2.298 print_stall=10 extruder: target=215 temp=215.1 pwm=0.443
Stats 6064.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5283049 bytes_read=2468242 bytes_retransmit=9 bytes_invalid=0 send_seq=141022 receive_seq=141018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=1485780 sysload=0.00 cputime=332.128 memavail=1627592 print_time=6075.277 buffer_time=2.251 print_stall=10 extruder: target=215 temp=215.0 pwm=0.559
Stats 6065.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5284320 bytes_read=2468740 bytes_retransmit=9 bytes_invalid=0 send_seq=141052 receive_seq=141052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.520 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1486282 sysload=0.00 cputime=332.199 memavail=1627844 print_time=6076.810 buffer_time=2.783 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 6066.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5284843 bytes_read=2469126 bytes_retransmit=9 bytes_invalid=0 send_seq=141070 receive_seq=141069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=1486461 sysload=0.00 cputime=332.260 memavail=1628096 print_time=6077.127 buffer_time=2.100 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 6067.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5285647 bytes_read=2469523 bytes_retransmit=9 bytes_invalid=0 send_seq=141091 receive_seq=141091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=1487236 sysload=0.00 cputime=332.328 memavail=1627592 print_time=6078.238 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 6068.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5287641 bytes_read=2470065 bytes_retransmit=9 bytes_invalid=0 send_seq=141134 receive_seq=141133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.486 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1488523 sysload=0.00 cputime=332.410 memavail=1627340 print_time=6079.188 buffer_time=2.158 print_stall=10 extruder: target=215 temp=214.9 pwm=0.614
Stats 6069.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5289264 bytes_read=2470556 bytes_retransmit=9 bytes_invalid=0 send_seq=141171 receive_seq=141171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.513 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=1489522 sysload=0.00 cputime=332.487 memavail=1627356 print_time=6080.515 buffer_time=2.484 print_stall=10 extruder: target=215 temp=215.1 pwm=0.443
Stats 6070.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5290626 bytes_read=2471003 bytes_retransmit=9 bytes_invalid=0 send_seq=141203 receive_seq=141203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.015 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=1490119 sysload=0.00 cputime=332.558 memavail=1627640 print_time=6081.651 buffer_time=2.615 print_stall=10 extruder: target=215 temp=215.1 pwm=0.477
Stats 6071.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5291197 bytes_read=2471410 bytes_retransmit=9 bytes_invalid=0 send_seq=141221 receive_seq=141221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1490403 sysload=0.00 cputime=332.601 memavail=1627356 print_time=6082.098 buffer_time=2.061 print_stall=10 extruder: target=215 temp=215.1 pwm=0.490
Stats 6072.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5292788 bytes_read=2471876 bytes_retransmit=9 bytes_invalid=0 send_seq=141255 receive_seq=141254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1490966 sysload=0.00 cputime=332.670 memavail=1627104 print_time=6083.710 buffer_time=2.669 print_stall=10 extruder: target=215 temp=215.0 pwm=0.490
Stats 6073.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5294050 bytes_read=2472328 bytes_retransmit=9 bytes_invalid=0 send_seq=141284 receive_seq=141284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=1491194 sysload=0.00 cputime=332.730 memavail=1627104 print_time=6084.277 buffer_time=2.235 print_stall=10 extruder: target=215 temp=215.1 pwm=0.490
Stats 6074.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5296317 bytes_read=2472880 bytes_retransmit=9 bytes_invalid=0 send_seq=141332 receive_seq=141331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=57.0 mcu_temp: temp=39.8 sd_pos=1491728 sysload=0.00 cputime=332.801 memavail=1627352 print_time=6085.379 buffer_time=2.335 print_stall=10 extruder: target=215 temp=215.0 pwm=0.500
Stats 6075.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5297288 bytes_read=2473308 bytes_retransmit=9 bytes_invalid=0 send_seq=141358 receive_seq=141358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1492222 sysload=0.00 cputime=332.867 memavail=1627352 print_time=6086.084 buffer_time=2.037 print_stall=10 extruder: target=215 temp=215.0 pwm=0.488
Stats 6076.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5298512 bytes_read=2473730 bytes_retransmit=9 bytes_invalid=0 send_seq=141387 receive_seq=141387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1492726 sysload=0.00 cputime=332.935 memavail=1627364 print_time=6087.517 buffer_time=2.469 print_stall=10 extruder: target=215 temp=215.1 pwm=0.407
Stats 6077.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5299174 bytes_read=2474140 bytes_retransmit=9 bytes_invalid=0 send_seq=141408 receive_seq=141408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1493113 sysload=0.00 cputime=333.002 memavail=1627356 print_time=6088.115 buffer_time=2.063 print_stall=10 extruder: target=215 temp=215.1 pwm=0.489
Stats 6078.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5300228 bytes_read=2474575 bytes_retransmit=9 bytes_invalid=0 send_seq=141434 receive_seq=141434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1493964 sysload=0.00 cputime=333.071 memavail=1627364 print_time=6089.064 buffer_time=2.009 print_stall=10 extruder: target=215 temp=215.1 pwm=0.451
Stats 6079.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5302519 bytes_read=2475092 bytes_retransmit=9 bytes_invalid=0 send_seq=141481 receive_seq=141480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=1495648 sysload=0.00 cputime=333.157 memavail=1627112 print_time=6090.229 buffer_time=2.170 print_stall=10 extruder: target=215 temp=215.1 pwm=0.485
Stats 6080.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5303604 bytes_read=2475554 bytes_retransmit=9 bytes_invalid=0 send_seq=141509 receive_seq=141509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1496227 sysload=0.00 cputime=333.224 memavail=1627120 print_time=6091.188 buffer_time=2.127 print_stall=10 extruder: target=215 temp=215.0 pwm=0.532
Stats 6081.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5304813 bytes_read=2476010 bytes_retransmit=9 bytes_invalid=0 send_seq=141540 receive_seq=141540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1496711 sysload=0.00 cputime=333.291 memavail=1627120 print_time=6092.106 buffer_time=2.040 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 6082.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5306361 bytes_read=2476462 bytes_retransmit=9 bytes_invalid=0 send_seq=141574 receive_seq=141573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1497323 sysload=0.00 cputime=333.361 memavail=1627120 print_time=6093.726 buffer_time=2.656 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 6083.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5307368 bytes_read=2476943 bytes_retransmit=9 bytes_invalid=0 send_seq=141600 receive_seq=141600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=1497520 sysload=0.00 cputime=333.419 memavail=1627116 print_time=6094.115 buffer_time=2.042 print_stall=10 extruder: target=215 temp=214.9 pwm=0.522
Stats 6084.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5309989 bytes_read=2477490 bytes_retransmit=9 bytes_invalid=0 send_seq=141652 receive_seq=141652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1498291 sysload=0.00 cputime=333.487 memavail=1627612 print_time=6095.261 buffer_time=2.186 print_stall=10 extruder: target=215 temp=215.1 pwm=0.453
Stats 6085.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5311782 bytes_read=2477987 bytes_retransmit=9 bytes_invalid=0 send_seq=141691 receive_seq=141691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=1499029 sysload=0.00 cputime=333.559 memavail=1627872 print_time=6097.036 buffer_time=2.957 print_stall=10 extruder: target=215 temp=215.0 pwm=0.466
Stats 6086.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5312261 bytes_read=2478388 bytes_retransmit=9 bytes_invalid=0 send_seq=141708 receive_seq=141708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.525 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1499178 sysload=0.00 cputime=333.618 memavail=1628132 print_time=6097.248 buffer_time=2.167 print_stall=10 extruder: target=215 temp=214.9 pwm=0.559
Stats 6087.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=5313434 bytes_read=2478815 bytes_retransmit=9 bytes_invalid=0 send_seq=141736 receive_seq=141736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=1500025 sysload=0.00 cputime=333.693 memavail=1628192 print_time=6098.285 buffer_time=2.200 print_stall=10 extruder: target=215 temp=215.0 pwm=0.520
Stats 6088.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=5315804 bytes_read=2479367 bytes_retransmit=9 bytes_invalid=0 send_seq=141784 receive_seq=141783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=1501336 sysload=0.00 cputime=333.775 memavail=1627940 print_time=6099.186 buffer_time=2.097 print_stall=10 extruder: target=215 temp=215.0 pwm=0.502
Stats 6089.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=5317027 bytes_read=2479843 bytes_retransmit=9 bytes_invalid=0 send_seq=141816 receive_seq=141815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=1501862 sysload=0.00 cputime=333.829 memavail=1627940 print_time=6100.258 buffer_time=2.169 print_stall=10 extruder: target=215 temp=215.1 pwm=0.458
Stats 6090.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=5318207 bytes_read=2480280 bytes_retransmit=9 bytes_invalid=0 send_seq=141846 receive_seq=141845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1502298 sysload=0.00 cputime=333.895 memavail=1627944 print_time=6101.203 buffer_time=2.111 print_stall=10 extruder: target=215 temp=215.0 pwm=0.478
Stats 6091.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=5319995 bytes_read=2480782 bytes_retransmit=9 bytes_invalid=0 send_seq=141885 receive_seq=141885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.452 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1502887 sysload=0.00 cputime=333.962 memavail=1627944 print_time=6102.561 buffer_time=2.467 print_stall=10 extruder: target=215 temp=214.9 pwm=0.534
Stats 6092.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=5322252 bytes_read=2481323 bytes_retransmit=9 bytes_invalid=0 send_seq=141931 receive_seq=141930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=1503646 sysload=0.00 cputime=334.035 memavail=1627952 print_time=6103.324 buffer_time=2.227 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 6093.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=5323841 bytes_read=2481810 bytes_retransmit=9 bytes_invalid=0 send_seq=141967 receive_seq=141967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=1504147 sysload=0.00 cputime=334.092 memavail=1627960 print_time=6104.260 buffer_time=2.161 print_stall=10 extruder: target=215 temp=215.0 pwm=0.487
Stats 6094.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=5325016 bytes_read=2482257 bytes_retransmit=9 bytes_invalid=0 send_seq=141996 receive_seq=141996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=1504564 sysload=0.00 cputime=334.146 memavail=1627960 print_time=6105.407 buffer_time=2.306 print_stall=10 extruder: target=215 temp=214.9 pwm=0.561
Stats 6095.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=5326898 bytes_read=2482773 bytes_retransmit=9 bytes_invalid=0 send_seq=142037 receive_seq=142036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=1506051 sysload=0.00 cputime=334.207 memavail=1627960 print_time=6106.461 buffer_time=2.358 print_stall=10 extruder: target=215 temp=215.0 pwm=0.492
Stats 6096.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=5328525 bytes_read=2483240 bytes_retransmit=9 bytes_invalid=0 send_seq=142073 receive_seq=142072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1506593 sysload=0.00 cputime=334.272 memavail=1627960 print_time=6107.348 buffer_time=2.240 print_stall=10 extruder: target=215 temp=215.0 pwm=0.492
Stats 6097.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=5329460 bytes_read=2483697 bytes_retransmit=9 bytes_invalid=0 send_seq=142100 receive_seq=142100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1507123 sysload=0.00 cputime=334.340 memavail=1628104 print_time=6108.184 buffer_time=2.073 print_stall=10 extruder: target=215 temp=214.9 pwm=0.592
Stats 6098.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5330836 bytes_read=2484173 bytes_retransmit=9 bytes_invalid=0 send_seq=142132 receive_seq=142132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=1508973 sysload=0.00 cputime=334.424 memavail=1628048 print_time=6109.448 buffer_time=2.335 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 6099.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5332645 bytes_read=2484650 bytes_retransmit=9 bytes_invalid=0 send_seq=142170 receive_seq=142170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1509429 sysload=0.00 cputime=334.489 memavail=1627544 print_time=6110.287 buffer_time=2.173 print_stall=10 extruder: target=215 temp=214.9 pwm=0.527
Stats 6100.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5333583 bytes_read=2485087 bytes_retransmit=9 bytes_invalid=0 send_seq=142194 receive_seq=142194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=54.9 pwm=0.654 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=1509903 sysload=0.00 cputime=334.554 memavail=1628048 print_time=6111.301 buffer_time=2.183 print_stall=10 extruder: target=215 temp=214.9 pwm=0.542
Stats 6101.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5335309 bytes_read=2485568 bytes_retransmit=9 bytes_invalid=0 send_seq=142231 receive_seq=142230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1511263 sysload=0.00 cputime=334.634 memavail=1627792 print_time=6112.383 buffer_time=2.263 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 6102.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5336275 bytes_read=2485990 bytes_retransmit=9 bytes_invalid=0 send_seq=142257 receive_seq=142257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=1511727 sysload=0.00 cputime=334.698 memavail=1628044 print_time=6113.204 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.1 pwm=0.453
Stats 6103.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5337500 bytes_read=2486472 bytes_retransmit=9 bytes_invalid=0 send_seq=142287 receive_seq=142287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1512879 sysload=0.00 cputime=334.771 memavail=1628296 print_time=6114.468 buffer_time=2.342 print_stall=10 extruder: target=215 temp=215.2 pwm=0.388
Stats 6104.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5338946 bytes_read=2486938 bytes_retransmit=9 bytes_invalid=0 send_seq=142320 receive_seq=142320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=1513738 sysload=0.00 cputime=334.837 memavail=1628048 print_time=6115.622 buffer_time=2.495 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 6105.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5339925 bytes_read=2487360 bytes_retransmit=9 bytes_invalid=0 send_seq=142347 receive_seq=142347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1514353 sysload=0.00 cputime=334.905 memavail=1627796 print_time=6116.331 buffer_time=2.204 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 6106.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5340970 bytes_read=2487807 bytes_retransmit=9 bytes_invalid=0 send_seq=142373 receive_seq=142373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=1515341 sysload=0.00 cputime=334.979 memavail=1627800 print_time=6117.177 buffer_time=2.049 print_stall=10 extruder: target=215 temp=215.2 pwm=0.438
Stats 6107.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5342174 bytes_read=2488258 bytes_retransmit=9 bytes_invalid=0 send_seq=142403 receive_seq=142403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.490 rpi: temp=57.0 mcu_temp: temp=39.4 sd_pos=1515782 sysload=0.00 cputime=335.045 memavail=1627800 print_time=6118.203 buffer_time=2.074 print_stall=10 extruder: target=215 temp=214.9 pwm=0.595
Stats 6108.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=5342847 bytes_read=2488640 bytes_retransmit=9 bytes_invalid=0 send_seq=142422 receive_seq=142422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996403 heater_bed: target=0 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=1516177 sysload=0.00 cputime=335.113 memavail=1627548 print_time=6120.372 buffer_time=3.242 print_stall=10 extruder: target=0 temp=215.0 pwm=0.000
Stats 6109.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5342973 bytes_read=2489017 bytes_retransmit=9 bytes_invalid=0 send_seq=142431 receive_seq=142431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=1516177 sysload=0.00 cputime=335.167 memavail=1627860 print_time=6120.372 buffer_time=2.242 print_stall=10 extruder: target=0 temp=214.9 pwm=0.000
Stats 6110.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5343456 bytes_read=2489398 bytes_retransmit=9 bytes_invalid=0 send_seq=142447 receive_seq=142447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=0 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=1516177 sysload=0.00 cputime=335.226 memavail=1628112 print_time=6121.992 buffer_time=2.861 print_stall=10 extruder: target=0 temp=215.0 pwm=0.000
Stats 6111.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5343631 bytes_read=2489735 bytes_retransmit=9 bytes_invalid=0 send_seq=142457 receive_seq=142457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996400 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=1516177 sysload=0.00 cputime=335.282 memavail=1627860 print_time=6122.292 buffer_time=2.159 print_stall=10 extruder: target=0 temp=215.0 pwm=0.000
Stats 6112.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5344015 bytes_read=2490117 bytes_retransmit=9 bytes_invalid=0 send_seq=142470 receive_seq=142470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996399 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=1516177 sysload=0.00 cputime=335.337 memavail=1627832 print_time=6123.287 buffer_time=2.154 print_stall=10 extruder: target=0 temp=214.7 pwm=0.000
Finished SD card print
Exiting SD card print (position 1528736)
Stats 6113.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=5344225 bytes_read=2490473 bytes_retransmit=9 bytes_invalid=0 send_seq=142481 receive_seq=142481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.0  sysload=0.00 cputime=335.415 memavail=1615532 print_time=6123.387 buffer_time=1.253 print_stall=10 extruder: target=0 temp=214.3 pwm=0.000
Stats 6114.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=5344255 bytes_read=2490646 bytes_retransmit=9 bytes_invalid=0 send_seq=142484 receive_seq=142484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.9  sysload=0.00 cputime=335.433 memavail=1628660 print_time=6123.387 buffer_time=0.252 print_stall=10 extruder: target=0 temp=214.1 pwm=0.000
Stats 6115.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=5344261 bytes_read=2490824 bytes_retransmit=9 bytes_invalid=0 send_seq=142485 receive_seq=142485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=54.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.4  sysload=0.00 cputime=335.458 memavail=1628416 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=213.8 pwm=0.000
Stats 6116.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=5344337 bytes_read=2490996 bytes_retransmit=9 bytes_invalid=0 send_seq=142488 receive_seq=142488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=54.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9  sysload=0.00 cputime=335.491 memavail=1628728 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=213.2 pwm=0.000
Stats 6117.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=5344362 bytes_read=2491149 bytes_retransmit=9 bytes_invalid=0 send_seq=142490 receive_seq=142490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=54.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.2  sysload=0.00 cputime=335.514 memavail=1628788 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=212.7 pwm=0.000
Stats 6118.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=5344368 bytes_read=2491327 bytes_retransmit=9 bytes_invalid=0 send_seq=142491 receive_seq=142491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=40.1  sysload=0.00 cputime=335.544 memavail=1616736 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=212.3 pwm=0.000
Stats 6119.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=5344393 bytes_read=2491509 bytes_retransmit=9 bytes_invalid=0 send_seq=142493 receive_seq=142493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.7  sysload=0.00 cputime=335.564 memavail=1577316 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=211.6 pwm=0.000
Stats 6120.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=5344399 bytes_read=2491657 bytes_retransmit=9 bytes_invalid=0 send_seq=142494 receive_seq=142494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=40.2  sysload=0.00 cputime=335.583 memavail=1525412 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=210.8 pwm=0.000
Stats 6121.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=5344454 bytes_read=2491866 bytes_retransmit=9 bytes_invalid=0 send_seq=142499 receive_seq=142499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=40.1  sysload=0.00 cputime=335.606 memavail=1491896 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=210.4 pwm=0.000
Stats 6122.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=5344484 bytes_read=2492038 bytes_retransmit=9 bytes_invalid=0 send_seq=142502 receive_seq=142502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=40.3  sysload=0.48 cputime=335.629 memavail=1626796 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=209.4 pwm=0.000
Stats 6123.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=5344490 bytes_read=2492186 bytes_retransmit=9 bytes_invalid=0 send_seq=142503 receive_seq=142503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.9  sysload=0.48 cputime=335.649 memavail=1625928 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=208.8 pwm=0.000
Stats 6124.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=5344524 bytes_read=2492389 bytes_retransmit=9 bytes_invalid=0 send_seq=142506 receive_seq=142506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=54.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.5  sysload=0.48 cputime=335.673 memavail=1625928 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=208.0 pwm=0.000
Stats 6125.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=5344549 bytes_read=2492556 bytes_retransmit=9 bytes_invalid=0 send_seq=142508 receive_seq=142508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=54.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=40.2  sysload=0.48 cputime=335.707 memavail=1625928 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=207.0 pwm=0.000
Stats 6126.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=5344579 bytes_read=2492714 bytes_retransmit=9 bytes_invalid=0 send_seq=142511 receive_seq=142511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=54.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.0  sysload=0.48 cputime=335.740 memavail=1625916 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=206.2 pwm=0.000
Stats 6127.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=5344604 bytes_read=2492897 bytes_retransmit=9 bytes_invalid=0 send_seq=142513 receive_seq=142513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.1  sysload=0.44 cputime=335.762 memavail=1626192 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=205.6 pwm=0.000
Stats 6128.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=5344610 bytes_read=2493059 bytes_retransmit=9 bytes_invalid=0 send_seq=142514 receive_seq=142514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=41.1  sysload=0.44 cputime=335.793 memavail=1625940 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=204.4 pwm=0.000
Stats 6129.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5344635 bytes_read=2493227 bytes_retransmit=9 bytes_invalid=0 send_seq=142516 receive_seq=142516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.8  sysload=0.44 cputime=335.815 memavail=1626492 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=203.7 pwm=0.000
Stats 6130.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5344660 bytes_read=2493410 bytes_retransmit=9 bytes_invalid=0 send_seq=142518 receive_seq=142518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=40.2  sysload=0.44 cputime=335.848 memavail=1626088 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=202.9 pwm=0.000
Stats 6131.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5344690 bytes_read=2493582 bytes_retransmit=9 bytes_invalid=0 send_seq=142521 receive_seq=142521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.8  sysload=0.44 cputime=335.881 memavail=1626108 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=201.8 pwm=0.000
Stats 6132.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5344720 bytes_read=2493740 bytes_retransmit=9 bytes_invalid=0 send_seq=142524 receive_seq=142524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.5  sysload=0.41 cputime=335.915 memavail=1626612 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=200.9 pwm=0.000
Stats 6133.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5344745 bytes_read=2493923 bytes_retransmit=9 bytes_invalid=0 send_seq=142526 receive_seq=142526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=53.7 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.3  sysload=0.41 cputime=335.947 memavail=1626308 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=200.1 pwm=0.000
Stats 6134.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5344770 bytes_read=2494102 bytes_retransmit=9 bytes_invalid=0 send_seq=142528 receive_seq=142528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.5  sysload=0.41 cputime=335.980 memavail=1625744 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=199.1 pwm=0.000
Stats 6135.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5344804 bytes_read=2494249 bytes_retransmit=9 bytes_invalid=0 send_seq=142531 receive_seq=142531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=53.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.0  sysload=0.41 cputime=336.013 memavail=1625492 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=198.2 pwm=0.000
Stats 6136.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5344858 bytes_read=2494435 bytes_retransmit=9 bytes_invalid=0 send_seq=142536 receive_seq=142536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=53.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.1  sysload=0.41 cputime=336.047 memavail=1625180 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=197.2 pwm=0.000
Stats 6137.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5344888 bytes_read=2494596 bytes_retransmit=9 bytes_invalid=0 send_seq=142539 receive_seq=142539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=53.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.9  sysload=0.37 cputime=336.080 memavail=1625184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=196.1 pwm=0.000
Stats 6138.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5344918 bytes_read=2494747 bytes_retransmit=9 bytes_invalid=0 send_seq=142542 receive_seq=142542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=53.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.8  sysload=0.37 cputime=336.113 memavail=1625196 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=195.3 pwm=0.000
Stats 6139.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5344943 bytes_read=2494945 bytes_retransmit=9 bytes_invalid=0 send_seq=142544 receive_seq=142544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=52.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=40.4  sysload=0.37 cputime=336.136 memavail=1624692 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=194.4 pwm=0.000
Stats 6140.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5344973 bytes_read=2495117 bytes_retransmit=9 bytes_invalid=0 send_seq=142547 receive_seq=142547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=52.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.1  sysload=0.37 cputime=336.168 memavail=1625196 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=193.1 pwm=0.000
Stats 6141.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5344998 bytes_read=2495270 bytes_retransmit=9 bytes_invalid=0 send_seq=142549 receive_seq=142549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=52.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.2  sysload=0.37 cputime=336.201 memavail=1624944 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=192.4 pwm=0.000
Stats 6142.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345023 bytes_read=2495453 bytes_retransmit=9 bytes_invalid=0 send_seq=142551 receive_seq=142551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=52.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3  sysload=0.34 cputime=336.234 memavail=1625456 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=191.4 pwm=0.000
Stats 6143.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345029 bytes_read=2495615 bytes_retransmit=9 bytes_invalid=0 send_seq=142552 receive_seq=142552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3  sysload=0.34 cputime=336.267 memavail=1625452 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=190.3 pwm=0.000
Stats 6144.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=5345097 bytes_read=2495798 bytes_retransmit=9 bytes_invalid=0 send_seq=142557 receive_seq=142557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.3  sysload=0.34 cputime=336.301 memavail=1625136 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=189.4 pwm=0.000
Stats 6145.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=5345103 bytes_read=2495976 bytes_retransmit=9 bytes_invalid=0 send_seq=142558 receive_seq=142558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8  sysload=0.34 cputime=336.333 memavail=1625400 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=188.5 pwm=0.000
Stats 6146.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=5345137 bytes_read=2496148 bytes_retransmit=9 bytes_invalid=0 send_seq=142561 receive_seq=142561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.1  sysload=0.34 cputime=336.369 memavail=1625652 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=187.4 pwm=0.000
Stats 6147.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=5345186 bytes_read=2496311 bytes_retransmit=9 bytes_invalid=0 send_seq=142565 receive_seq=142565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.8  sysload=0.32 cputime=336.402 memavail=1624892 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=186.5 pwm=0.000
Stats 6148.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=5345192 bytes_read=2496489 bytes_retransmit=9 bytes_invalid=0 send_seq=142566 receive_seq=142566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.7  sysload=0.32 cputime=336.434 memavail=1624896 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=185.6 pwm=0.000
Stats 6149.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345217 bytes_read=2496671 bytes_retransmit=9 bytes_invalid=0 send_seq=142568 receive_seq=142568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8  sysload=0.32 cputime=336.456 memavail=1625088 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=184.6 pwm=0.000
Stats 6150.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345242 bytes_read=2496824 bytes_retransmit=9 bytes_invalid=0 send_seq=142570 receive_seq=142570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.9  sysload=0.32 cputime=336.489 memavail=1624788 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=183.7 pwm=0.000
Stats 6151.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345272 bytes_read=2497012 bytes_retransmit=9 bytes_invalid=0 send_seq=142573 receive_seq=142573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.6  sysload=0.32 cputime=336.522 memavail=1625100 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=182.7 pwm=0.000
Stats 6152.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345302 bytes_read=2497184 bytes_retransmit=9 bytes_invalid=0 send_seq=142576 receive_seq=142576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=51.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9  sysload=0.29 cputime=336.554 memavail=1624848 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=181.7 pwm=0.000
Stats 6153.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345332 bytes_read=2497342 bytes_retransmit=9 bytes_invalid=0 send_seq=142579 receive_seq=142579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=51.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.7  sysload=0.29 cputime=336.587 memavail=1625100 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=180.8 pwm=0.000
Stats 6154.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345362 bytes_read=2497545 bytes_retransmit=9 bytes_invalid=0 send_seq=142582 receive_seq=142582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=51.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6  sysload=0.29 cputime=336.620 memavail=1625100 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=180.0 pwm=0.000
Stats 6155.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345406 bytes_read=2497717 bytes_retransmit=9 bytes_invalid=0 send_seq=142585 receive_seq=142585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=51.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.6  sysload=0.29 cputime=336.652 memavail=1625532 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=178.9 pwm=0.000
Stats 6156.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345440 bytes_read=2497875 bytes_retransmit=9 bytes_invalid=0 send_seq=142588 receive_seq=142588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=51.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.6  sysload=0.29 cputime=336.685 memavail=1625792 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=178.0 pwm=0.000
Stats 6157.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345465 bytes_read=2498058 bytes_retransmit=9 bytes_invalid=0 send_seq=142590 receive_seq=142590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=51.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4  sysload=0.27 cputime=336.717 memavail=1625800 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=177.3 pwm=0.000
Stats 6158.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345495 bytes_read=2498230 bytes_retransmit=9 bytes_invalid=0 send_seq=142593 receive_seq=142593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=51.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.7  sysload=0.27 cputime=336.750 memavail=1626040 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=176.2 pwm=0.000
Stats 6159.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345525 bytes_read=2498403 bytes_retransmit=9 bytes_invalid=0 send_seq=142596 receive_seq=142596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=51.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5  sysload=0.27 cputime=336.782 memavail=1626092 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=175.4 pwm=0.000
Stats 6160.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345555 bytes_read=2498591 bytes_retransmit=9 bytes_invalid=0 send_seq=142599 receive_seq=142599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=51.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.6  sysload=0.27 cputime=336.818 memavail=1625588 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=174.6 pwm=0.000
Stats 6161.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345561 bytes_read=2498753 bytes_retransmit=9 bytes_invalid=0 send_seq=142600 receive_seq=142600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=50.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.3  sysload=0.27 cputime=336.851 memavail=1625336 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=173.5 pwm=0.000
Stats 6162.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345591 bytes_read=2498911 bytes_retransmit=9 bytes_invalid=0 send_seq=142603 receive_seq=142603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=50.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.6  sysload=0.27 cputime=336.884 memavail=1625084 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=172.7 pwm=0.000
Stats 6163.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=5345621 bytes_read=2499113 bytes_retransmit=9 bytes_invalid=0 send_seq=142606 receive_seq=142606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=50.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.2  sysload=0.25 cputime=336.918 memavail=1625084 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=171.7 pwm=0.000
Stats 6164.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5345651 bytes_read=2499285 bytes_retransmit=9 bytes_invalid=0 send_seq=142609 receive_seq=142609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=50.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.1  sysload=0.25 cputime=336.951 memavail=1624832 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=170.9 pwm=0.000
Stats 6165.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5345681 bytes_read=2499443 bytes_retransmit=9 bytes_invalid=0 send_seq=142612 receive_seq=142612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=0 temp=50.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.3  sysload=0.25 cputime=336.985 memavail=1624580 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=170.1 pwm=0.000
Stats 6166.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5345706 bytes_read=2499640 bytes_retransmit=9 bytes_invalid=0 send_seq=142614 receive_seq=142614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=50.6 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.1  sysload=0.25 cputime=337.018 memavail=1624580 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=169.1 pwm=0.000
Stats 6167.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5345740 bytes_read=2499798 bytes_retransmit=9 bytes_invalid=0 send_seq=142617 receive_seq=142617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=50.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.1  sysload=0.25 cputime=337.052 memavail=1624520 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=168.4 pwm=0.000
Stats 6168.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5345784 bytes_read=2499956 bytes_retransmit=9 bytes_invalid=0 send_seq=142620 receive_seq=142620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=50.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.2  sysload=0.22 cputime=337.085 memavail=1624268 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=167.5 pwm=0.000
Stats 6169.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345790 bytes_read=2500163 bytes_retransmit=9 bytes_invalid=0 send_seq=142621 receive_seq=142621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=50.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.1  sysload=0.22 cputime=337.109 memavail=1624544 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=166.5 pwm=0.000
Stats 6170.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345820 bytes_read=2500321 bytes_retransmit=9 bytes_invalid=0 send_seq=142624 receive_seq=142624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=50.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.9  sysload=0.22 cputime=337.141 memavail=1624796 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=165.8 pwm=0.000
Stats 6171.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345850 bytes_read=2500479 bytes_retransmit=9 bytes_invalid=0 send_seq=142627 receive_seq=142627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=50.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.4  sysload=0.22 cputime=337.175 memavail=1625048 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=165.0 pwm=0.000
Stats 6172.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345880 bytes_read=2500681 bytes_retransmit=9 bytes_invalid=0 send_seq=142630 receive_seq=142630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=49.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.8  sysload=0.22 cputime=337.209 memavail=1625552 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=164.1 pwm=0.000
Stats 6173.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5345905 bytes_read=2500834 bytes_retransmit=9 bytes_invalid=0 send_seq=142632 receive_seq=142632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=49.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.9  sysload=0.21 cputime=337.241 memavail=1625804 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=163.2 pwm=0.000
Stats 6174.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345930 bytes_read=2501002 bytes_retransmit=9 bytes_invalid=0 send_seq=142634 receive_seq=142634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=49.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.8  sysload=0.21 cputime=337.273 memavail=1625800 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=162.5 pwm=0.000
Stats 6175.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345936 bytes_read=2501194 bytes_retransmit=9 bytes_invalid=0 send_seq=142635 receive_seq=142635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=49.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.8  sysload=0.21 cputime=337.307 memavail=1625544 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=161.5 pwm=0.000
Stats 6176.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345961 bytes_read=2501347 bytes_retransmit=9 bytes_invalid=0 send_seq=142637 receive_seq=142637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=49.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.6  sysload=0.21 cputime=337.340 memavail=1625796 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=160.8 pwm=0.000
Stats 6177.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5345986 bytes_read=2501500 bytes_retransmit=9 bytes_invalid=0 send_seq=142639 receive_seq=142639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=49.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.7  sysload=0.21 cputime=337.373 memavail=1626052 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=160.2 pwm=0.000
Stats 6178.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346034 bytes_read=2501702 bytes_retransmit=9 bytes_invalid=0 send_seq=142642 receive_seq=142642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=49.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.7  sysload=0.27 cputime=337.407 memavail=1625800 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=159.2 pwm=0.000
Stats 6179.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346063 bytes_read=2501855 bytes_retransmit=9 bytes_invalid=0 send_seq=142644 receive_seq=142644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=49.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.8  sysload=0.27 cputime=337.437 memavail=1626368 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=158.4 pwm=0.000
Stats 6180.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=5346069 bytes_read=2502033 bytes_retransmit=9 bytes_invalid=0 send_seq=142645 receive_seq=142645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=48.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.4  sysload=0.27 cputime=337.468 memavail=1626364 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=157.8 pwm=0.000
Stats 6181.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=5346099 bytes_read=2502220 bytes_retransmit=9 bytes_invalid=0 send_seq=142648 receive_seq=142648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=49.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.5  sysload=0.27 cputime=337.502 memavail=1625860 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=157.0 pwm=0.000
Stats 6182.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=5346124 bytes_read=2502373 bytes_retransmit=9 bytes_invalid=0 send_seq=142650 receive_seq=142650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=48.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.8  sysload=0.27 cputime=337.535 memavail=1625616 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=156.2 pwm=0.000
Stats 6183.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=5346155 bytes_read=2502557 bytes_retransmit=9 bytes_invalid=0 send_seq=142653 receive_seq=142653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=48.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.2  sysload=0.33 cputime=337.567 memavail=1625616 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=155.6 pwm=0.000
Stats 6184.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=5346161 bytes_read=2502734 bytes_retransmit=9 bytes_invalid=0 send_seq=142654 receive_seq=142654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=48.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.5  sysload=0.33 cputime=337.600 memavail=1625364 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=154.7 pwm=0.000
Stats 6185.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346186 bytes_read=2502902 bytes_retransmit=9 bytes_invalid=0 send_seq=142656 receive_seq=142656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=48.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.9  sysload=0.33 cputime=337.632 memavail=1625924 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=154.0 pwm=0.000
Stats 6186.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346211 bytes_read=2503070 bytes_retransmit=9 bytes_invalid=0 send_seq=142658 receive_seq=142658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=48.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.2  sysload=0.33 cputime=337.666 memavail=1626176 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=153.3 pwm=0.000
Stats 6187.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346236 bytes_read=2503252 bytes_retransmit=9 bytes_invalid=0 send_seq=142660 receive_seq=142660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=48.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.1  sysload=0.33 cputime=337.699 memavail=1626428 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=152.2 pwm=0.000
Stats 6188.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346266 bytes_read=2503410 bytes_retransmit=9 bytes_invalid=0 send_seq=142663 receive_seq=142663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.8  sysload=0.30 cputime=337.732 memavail=1626488 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=151.7 pwm=0.000
Stats 6189.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346296 bytes_read=2503583 bytes_retransmit=9 bytes_invalid=0 send_seq=142666 receive_seq=142666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=48.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.0  sysload=0.30 cputime=337.766 memavail=1626288 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=151.1 pwm=0.000
Stats 6190.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346321 bytes_read=2503780 bytes_retransmit=9 bytes_invalid=0 send_seq=142668 receive_seq=142668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=48.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.0  sysload=0.30 cputime=337.800 memavail=1626300 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=150.2 pwm=0.000
Stats 6191.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346327 bytes_read=2503928 bytes_retransmit=9 bytes_invalid=0 send_seq=142669 receive_seq=142669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=48.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.8  sysload=0.30 cputime=337.832 memavail=1626048 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=149.6 pwm=0.000
Stats 6192.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346352 bytes_read=2504096 bytes_retransmit=9 bytes_invalid=0 send_seq=142671 receive_seq=142671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.9  sysload=0.30 cputime=337.866 memavail=1625736 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=148.9 pwm=0.000
Stats 6193.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346386 bytes_read=2504283 bytes_retransmit=9 bytes_invalid=0 send_seq=142674 receive_seq=142674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=48.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=37.7  sysload=0.28 cputime=337.899 memavail=1625740 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=148.1 pwm=0.000
Stats 6194.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346416 bytes_read=2504434 bytes_retransmit=9 bytes_invalid=0 send_seq=142677 receive_seq=142677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.7  sysload=0.28 cputime=337.932 memavail=1625680 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=147.4 pwm=0.000
Stats 6195.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346441 bytes_read=2504606 bytes_retransmit=9 bytes_invalid=0 send_seq=142679 receive_seq=142679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.8  sysload=0.28 cputime=337.965 memavail=1625176 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=146.8 pwm=0.000
Stats 6196.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346447 bytes_read=2504771 bytes_retransmit=9 bytes_invalid=0 send_seq=142680 receive_seq=142680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.7  sysload=0.28 cputime=337.998 memavail=1625184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=146.0 pwm=0.000
Stats 6197.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346472 bytes_read=2504914 bytes_retransmit=9 bytes_invalid=0 send_seq=142682 receive_seq=142682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.7  sysload=0.28 cputime=338.032 memavail=1625184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=145.3 pwm=0.000
Stats 6198.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346497 bytes_read=2505080 bytes_retransmit=9 bytes_invalid=0 send_seq=142684 receive_seq=142684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=47.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.4  sysload=0.26 cputime=338.056 memavail=1625192 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=144.7 pwm=0.000
Stats 6199.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346503 bytes_read=2505257 bytes_retransmit=9 bytes_invalid=0 send_seq=142685 receive_seq=142685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=47.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.6  sysload=0.26 cputime=338.090 memavail=1625508 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=143.9 pwm=0.000
Stats 6200.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346528 bytes_read=2505425 bytes_retransmit=9 bytes_invalid=0 send_seq=142687 receive_seq=142687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=47.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.6  sysload=0.26 cputime=338.126 memavail=1625260 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=143.2 pwm=0.000
Stats 6201.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346553 bytes_read=2505593 bytes_retransmit=9 bytes_invalid=0 send_seq=142689 receive_seq=142689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.6  sysload=0.26 cputime=338.160 memavail=1625264 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=142.7 pwm=0.000
Stats 6202.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346559 bytes_read=2505770 bytes_retransmit=9 bytes_invalid=0 send_seq=142690 receive_seq=142690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=47.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.2  sysload=0.26 cputime=338.193 memavail=1625264 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=141.9 pwm=0.000
Stats 6203.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346584 bytes_read=2505923 bytes_retransmit=9 bytes_invalid=0 send_seq=142692 receive_seq=142692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.7  sysload=0.24 cputime=338.226 memavail=1625516 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=141.3 pwm=0.000
Stats 6204.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5346614 bytes_read=2506096 bytes_retransmit=9 bytes_invalid=0 send_seq=142695 receive_seq=142695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=47.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.4  sysload=0.24 cputime=338.260 memavail=1625808 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=140.7 pwm=0.000
Stats 6205.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346644 bytes_read=2506298 bytes_retransmit=9 bytes_invalid=0 send_seq=142698 receive_seq=142698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=47.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.5  sysload=0.24 cputime=338.296 memavail=1626036 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=139.9 pwm=0.000
Stats 6206.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346674 bytes_read=2506456 bytes_retransmit=9 bytes_invalid=0 send_seq=142701 receive_seq=142701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=0 temp=47.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.6  sysload=0.24 cputime=338.330 memavail=1626036 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=139.2 pwm=0.000
Stats 6207.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346708 bytes_read=2506629 bytes_retransmit=9 bytes_invalid=0 send_seq=142704 receive_seq=142704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=47.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.2  sysload=0.24 cputime=338.364 memavail=1625472 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=138.6 pwm=0.000
Stats 6208.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346714 bytes_read=2506806 bytes_retransmit=9 bytes_invalid=0 send_seq=142705 receive_seq=142705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=47.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.3  sysload=0.22 cputime=338.387 memavail=1625472 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=137.8 pwm=0.000
Stats 6209.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5346744 bytes_read=2506964 bytes_retransmit=9 bytes_invalid=0 send_seq=142708 receive_seq=142708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=47.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.8  sysload=0.22 cputime=338.409 memavail=1625980 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=137.3 pwm=0.000
Stats 6210.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5346769 bytes_read=2507146 bytes_retransmit=9 bytes_invalid=0 send_seq=142710 receive_seq=142710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.1  sysload=0.22 cputime=338.433 memavail=1626240 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=136.7 pwm=0.000
Stats 6211.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5346775 bytes_read=2507323 bytes_retransmit=9 bytes_invalid=0 send_seq=142711 receive_seq=142711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.3  sysload=0.22 cputime=338.455 memavail=1625988 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=135.9 pwm=0.000
Stats 6212.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5346805 bytes_read=2507481 bytes_retransmit=9 bytes_invalid=0 send_seq=142714 receive_seq=142714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.8  sysload=0.22 cputime=338.488 memavail=1625988 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=135.3 pwm=0.000
Stats 6213.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5346835 bytes_read=2507654 bytes_retransmit=9 bytes_invalid=0 send_seq=142717 receive_seq=142717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=36.9  sysload=0.20 cputime=338.523 memavail=1626240 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=134.8 pwm=0.000
Stats 6214.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5346841 bytes_read=2507831 bytes_retransmit=9 bytes_invalid=0 send_seq=142718 receive_seq=142718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.5  sysload=0.20 cputime=338.556 memavail=1626240 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=134.0 pwm=0.000
Stats 6215.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5346871 bytes_read=2508004 bytes_retransmit=9 bytes_invalid=0 send_seq=142721 receive_seq=142721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.3  sysload=0.20 cputime=338.590 memavail=1625996 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=133.5 pwm=0.000
Stats 6216.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5346877 bytes_read=2508167 bytes_retransmit=9 bytes_invalid=0 send_seq=142722 receive_seq=142722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=36.6  sysload=0.20 cputime=338.624 memavail=1625996 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=132.9 pwm=0.000
Stats 6217.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5346907 bytes_read=2508354 bytes_retransmit=9 bytes_invalid=0 send_seq=142725 receive_seq=142725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.6  sysload=0.20 cputime=338.657 memavail=1625748 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=132.2 pwm=0.000
Stats 6218.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5346937 bytes_read=2508512 bytes_retransmit=9 bytes_invalid=0 send_seq=142728 receive_seq=142728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.1  sysload=0.18 cputime=338.691 memavail=1625748 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=131.6 pwm=0.000
Stats 6219.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5346943 bytes_read=2508675 bytes_retransmit=9 bytes_invalid=0 send_seq=142729 receive_seq=142729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=36.3  sysload=0.18 cputime=338.724 memavail=1625452 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=131.1 pwm=0.000
Stats 6220.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5346973 bytes_read=2508876 bytes_retransmit=9 bytes_invalid=0 send_seq=142732 receive_seq=142732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.3  sysload=0.18 cputime=338.759 memavail=1625452 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=130.3 pwm=0.000
Stats 6221.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347003 bytes_read=2509034 bytes_retransmit=9 bytes_invalid=0 send_seq=142735 receive_seq=142735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.3  sysload=0.18 cputime=338.793 memavail=1624948 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=129.8 pwm=0.000
Stats 6222.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347009 bytes_read=2509212 bytes_retransmit=9 bytes_invalid=0 send_seq=142736 receive_seq=142736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=36.5  sysload=0.18 cputime=338.817 memavail=1624948 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=129.3 pwm=0.000
Stats 6223.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347038 bytes_read=2509379 bytes_retransmit=9 bytes_invalid=0 send_seq=142738 receive_seq=142738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=36.3  sysload=0.17 cputime=338.849 memavail=1624948 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=128.6 pwm=0.000
Stats 6224.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347068 bytes_read=2509540 bytes_retransmit=9 bytes_invalid=0 send_seq=142741 receive_seq=142741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=36.4  sysload=0.17 cputime=338.881 memavail=1624956 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=128.1 pwm=0.000
Stats 6225.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=5347136 bytes_read=2509756 bytes_retransmit=9 bytes_invalid=0 send_seq=142746 receive_seq=142746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=46.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.5  sysload=0.17 cputime=338.917 memavail=1624692 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=127.5 pwm=0.000
Stats 6226.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=5347142 bytes_read=2509922 bytes_retransmit=9 bytes_invalid=0 send_seq=142747 receive_seq=142747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=0 temp=46.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=36.4  sysload=0.17 cputime=338.951 memavail=1624692 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=126.8 pwm=0.000
Stats 6227.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=5347167 bytes_read=2510078 bytes_retransmit=9 bytes_invalid=0 send_seq=142749 receive_seq=142749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=0 temp=46.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.8  sysload=0.17 cputime=338.984 memavail=1624692 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=126.3 pwm=0.000
Stats 6228.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=5347197 bytes_read=2510269 bytes_retransmit=9 bytes_invalid=0 send_seq=142752 receive_seq=142752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=0 temp=45.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.3  sysload=0.15 cputime=339.019 memavail=1624884 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=125.7 pwm=0.000
Stats 6229.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=5347203 bytes_read=2510435 bytes_retransmit=9 bytes_invalid=0 send_seq=142753 receive_seq=142753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=0 temp=45.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.2  sysload=0.15 cputime=339.044 memavail=1624556 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=125.0 pwm=0.000
Stats 6230.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347228 bytes_read=2510606 bytes_retransmit=9 bytes_invalid=0 send_seq=142755 receive_seq=142755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=0 temp=45.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=36.2  sysload=0.15 cputime=339.077 memavail=1624572 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=124.5 pwm=0.000
Stats 6231.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347258 bytes_read=2510797 bytes_retransmit=9 bytes_invalid=0 send_seq=142758 receive_seq=142758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=0 temp=45.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.2  sysload=0.15 cputime=339.110 memavail=1624724 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=123.9 pwm=0.000
Stats 6232.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347288 bytes_read=2510973 bytes_retransmit=9 bytes_invalid=0 send_seq=142761 receive_seq=142761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=0 temp=45.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.8  sysload=0.15 cputime=339.145 memavail=1624572 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=123.3 pwm=0.000
Stats 6233.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347318 bytes_read=2511134 bytes_retransmit=9 bytes_invalid=0 send_seq=142764 receive_seq=142764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=0 temp=44.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=36.1  sysload=0.14 cputime=339.178 memavail=1624512 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=122.8 pwm=0.000
Stats 6234.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347324 bytes_read=2511315 bytes_retransmit=9 bytes_invalid=0 send_seq=142765 receive_seq=142765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=0 temp=44.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.8  sysload=0.14 cputime=339.212 memavail=1624708 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=122.4 pwm=0.000
Stats 6235.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5347354 bytes_read=2511505 bytes_retransmit=9 bytes_invalid=0 send_seq=142768 receive_seq=142768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=0 temp=44.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.8  sysload=0.14 cputime=339.247 memavail=1624960 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=121.7 pwm=0.000
Stats 6236.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5347360 bytes_read=2511656 bytes_retransmit=9 bytes_invalid=0 send_seq=142769 receive_seq=142769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996407 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.7  sysload=0.14 cputime=339.280 memavail=1624960 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=121.3 pwm=0.000
Stats 6237.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5347385 bytes_read=2511842 bytes_retransmit=9 bytes_invalid=0 send_seq=142771 receive_seq=142771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996407 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.8  sysload=0.14 cputime=339.315 memavail=1625176 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=120.7 pwm=0.000
Stats 6238.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5347391 bytes_read=2512008 bytes_retransmit=9 bytes_invalid=0 send_seq=142772 receive_seq=142772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=35.5  sysload=0.13 cputime=339.338 memavail=1624960 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=120.1 pwm=0.000
Stats 6239.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=5347421 bytes_read=2512169 bytes_retransmit=9 bytes_invalid=0 send_seq=142775 receive_seq=142775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=35.5  sysload=0.13 cputime=339.370 memavail=1624984 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=119.5 pwm=0.000
Stats 6240.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347427 bytes_read=2512364 bytes_retransmit=9 bytes_invalid=0 send_seq=142776 receive_seq=142776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.9  sysload=0.13 cputime=339.402 memavail=1624972 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=119.1 pwm=0.000
Stats 6241.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347461 bytes_read=2512540 bytes_retransmit=9 bytes_invalid=0 send_seq=142779 receive_seq=142779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=35.7  sysload=0.13 cputime=339.435 memavail=1624472 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=118.4 pwm=0.000
Stats 6242.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347486 bytes_read=2512696 bytes_retransmit=9 bytes_invalid=0 send_seq=142781 receive_seq=142781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.4  sysload=0.13 cputime=339.468 memavail=1624220 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=117.9 pwm=0.000
Stats 6243.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347511 bytes_read=2512882 bytes_retransmit=9 bytes_invalid=0 send_seq=142783 receive_seq=142783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.4  sysload=0.12 cputime=339.501 memavail=1624472 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=117.4 pwm=0.000
Stats 6244.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5347542 bytes_read=2513069 bytes_retransmit=9 bytes_invalid=0 send_seq=142786 receive_seq=142786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.5  sysload=0.12 cputime=339.534 memavail=1624372 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=116.9 pwm=0.000
Stats 6245.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=5347586 bytes_read=2513245 bytes_retransmit=9 bytes_invalid=0 send_seq=142789 receive_seq=142789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.3  sysload=0.12 cputime=339.568 memavail=1624348 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=116.3 pwm=0.000
Stats 6246.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=5347611 bytes_read=2513431 bytes_retransmit=9 bytes_invalid=0 send_seq=142791 receive_seq=142791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=44.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.5  sysload=0.12 cputime=339.602 memavail=1624408 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=115.9 pwm=0.000
Stats 6247.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=5347617 bytes_read=2513597 bytes_retransmit=9 bytes_invalid=0 send_seq=142792 receive_seq=142792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=44.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.1  sysload=0.12 cputime=339.635 memavail=1624692 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=115.2 pwm=0.000
Stats 6248.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=5347647 bytes_read=2513758 bytes_retransmit=9 bytes_invalid=0 send_seq=142795 receive_seq=142795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=44.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.4  sysload=0.11 cputime=339.670 memavail=1624440 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=114.7 pwm=0.000
Stats 6249.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=5347653 bytes_read=2513939 bytes_retransmit=9 bytes_invalid=0 send_seq=142796 receive_seq=142796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=44.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.4  sysload=0.11 cputime=339.702 memavail=1624444 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=114.3 pwm=0.000
Stats 6250.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347678 bytes_read=2514125 bytes_retransmit=9 bytes_invalid=0 send_seq=142798 receive_seq=142798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=43.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.2  sysload=0.11 cputime=339.737 memavail=1624948 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=113.6 pwm=0.000
Stats 6251.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347684 bytes_read=2514276 bytes_retransmit=9 bytes_invalid=0 send_seq=142799 receive_seq=142799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=44.4 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=35.6  sysload=0.11 cputime=339.768 memavail=1625260 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=113.3 pwm=0.000
Stats 6252.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347709 bytes_read=2514462 bytes_retransmit=9 bytes_invalid=0 send_seq=142801 receive_seq=142801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=44.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.0  sysload=0.11 cputime=339.801 memavail=1625520 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=112.8 pwm=0.000
Stats 6253.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347715 bytes_read=2514628 bytes_retransmit=9 bytes_invalid=0 send_seq=142802 receive_seq=142802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.9  sysload=0.10 cputime=339.832 memavail=1625580 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=112.3 pwm=0.000
Stats 6254.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347764 bytes_read=2514784 bytes_retransmit=9 bytes_invalid=0 send_seq=142806 receive_seq=142806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=43.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.0  sysload=0.10 cputime=339.864 memavail=1625832 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=111.7 pwm=0.000
Stats 6255.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347770 bytes_read=2514967 bytes_retransmit=9 bytes_invalid=0 send_seq=142807 receive_seq=142807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=43.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.5  sysload=0.10 cputime=339.895 memavail=1626084 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=111.2 pwm=0.000
Stats 6256.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347800 bytes_read=2515132 bytes_retransmit=9 bytes_invalid=0 send_seq=142810 receive_seq=142810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.7  sysload=0.10 cputime=339.926 memavail=1625832 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=110.6 pwm=0.000
Stats 6257.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347806 bytes_read=2515275 bytes_retransmit=9 bytes_invalid=0 send_seq=142811 receive_seq=142811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=43.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.1  sysload=0.10 cputime=339.957 memavail=1626084 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=110.2 pwm=0.000
Stats 6258.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347836 bytes_read=2515466 bytes_retransmit=9 bytes_invalid=0 send_seq=142814 receive_seq=142814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.8  sysload=0.09 cputime=339.989 memavail=1625832 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=110.2 pwm=0.000
Stats 6259.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347842 bytes_read=2515632 bytes_retransmit=9 bytes_invalid=0 send_seq=142815 receive_seq=142815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.6  sysload=0.09 cputime=340.011 memavail=1625780 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=110.2 pwm=0.000
Stats 6260.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=5347848 bytes_read=2515783 bytes_retransmit=9 bytes_invalid=0 send_seq=142816 receive_seq=142816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.7  sysload=0.09 cputime=340.041 memavail=1625528 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=108.8 pwm=0.000
Stats 6261.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5347882 bytes_read=2515988 bytes_retransmit=9 bytes_invalid=0 send_seq=142819 receive_seq=142819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.7  sysload=0.09 cputime=340.073 memavail=1625528 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=108.4 pwm=0.000
Stats 6262.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5347888 bytes_read=2516154 bytes_retransmit=9 bytes_invalid=0 send_seq=142820 receive_seq=142820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.3  sysload=0.09 cputime=340.104 memavail=1625276 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=107.9 pwm=0.000
Stats 6263.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5347913 bytes_read=2516310 bytes_retransmit=9 bytes_invalid=0 send_seq=142822 receive_seq=142822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.9  sysload=0.08 cputime=340.135 memavail=1624772 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=107.3 pwm=0.000
Stats 6264.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5347938 bytes_read=2516496 bytes_retransmit=9 bytes_invalid=0 send_seq=142824 receive_seq=142824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.0  sysload=0.08 cputime=340.168 memavail=1625032 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=106.9 pwm=0.000
Stats 6265.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5347944 bytes_read=2516662 bytes_retransmit=9 bytes_invalid=0 send_seq=142825 receive_seq=142825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.7  sysload=0.08 cputime=340.199 memavail=1624780 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=106.4 pwm=0.000
Stats 6266.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347969 bytes_read=2516833 bytes_retransmit=9 bytes_invalid=0 send_seq=142827 receive_seq=142827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.7  sysload=0.08 cputime=340.231 memavail=1625032 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=105.8 pwm=0.000
Stats 6267.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5347975 bytes_read=2517014 bytes_retransmit=9 bytes_invalid=0 send_seq=142828 receive_seq=142828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.4  sysload=0.08 cputime=340.262 memavail=1625032 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=105.6 pwm=0.000
Stats 6268.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5348005 bytes_read=2517190 bytes_retransmit=9 bytes_invalid=0 send_seq=142831 receive_seq=142831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.7  sysload=0.08 cputime=340.294 memavail=1624528 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=105.0 pwm=0.000
Stats 6269.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5348011 bytes_read=2517341 bytes_retransmit=9 bytes_invalid=0 send_seq=142832 receive_seq=142832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.6  sysload=0.08 cputime=340.318 memavail=1625228 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=104.6 pwm=0.000
Stats 6270.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5348017 bytes_read=2517522 bytes_retransmit=9 bytes_invalid=0 send_seq=142833 receive_seq=142833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.3  sysload=0.08 cputime=340.349 memavail=1625176 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=104.2 pwm=0.000
Stats 6271.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348047 bytes_read=2517712 bytes_retransmit=9 bytes_invalid=0 send_seq=142836 receive_seq=142836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.5  sysload=0.08 cputime=340.381 memavail=1625120 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=103.7 pwm=0.000
Stats 6272.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348053 bytes_read=2517863 bytes_retransmit=9 bytes_invalid=0 send_seq=142837 receive_seq=142837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.5  sysload=0.08 cputime=340.413 memavail=1625120 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=103.2 pwm=0.000
Stats 6273.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348097 bytes_read=2518054 bytes_retransmit=9 bytes_invalid=0 send_seq=142840 receive_seq=142840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.5  sysload=0.07 cputime=340.445 memavail=1625120 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=102.8 pwm=0.000
Stats 6274.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348151 bytes_read=2518240 bytes_retransmit=9 bytes_invalid=0 send_seq=142845 receive_seq=142845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.3  sysload=0.07 cputime=340.468 memavail=1624868 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=102.3 pwm=0.000
Stats 6275.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348181 bytes_read=2518401 bytes_retransmit=9 bytes_invalid=0 send_seq=142848 receive_seq=142848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996408 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.4  sysload=0.07 cputime=340.499 memavail=1624868 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=101.9 pwm=0.000
Stats 6276.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348187 bytes_read=2518597 bytes_retransmit=9 bytes_invalid=0 send_seq=142849 receive_seq=142849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.3  sysload=0.07 cputime=340.531 memavail=1624868 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=101.6 pwm=0.000
Stats 6277.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348217 bytes_read=2518773 bytes_retransmit=9 bytes_invalid=0 send_seq=142852 receive_seq=142852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.4  sysload=0.07 cputime=340.564 memavail=1624876 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=101.0 pwm=0.000
Stats 6278.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348223 bytes_read=2518924 bytes_retransmit=9 bytes_invalid=0 send_seq=142853 receive_seq=142853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.2  sysload=0.07 cputime=340.595 memavail=1625068 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=100.5 pwm=0.000
Stats 6279.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348229 bytes_read=2519105 bytes_retransmit=9 bytes_invalid=0 send_seq=142854 receive_seq=142854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.1  sysload=0.07 cputime=340.617 memavail=1624192 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=100.3 pwm=0.000
Stats 6280.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348254 bytes_read=2519276 bytes_retransmit=9 bytes_invalid=0 send_seq=142856 receive_seq=142856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.3  sysload=0.07 cputime=340.648 memavail=1624192 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=99.7 pwm=0.000
Stats 6281.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348260 bytes_read=2519441 bytes_retransmit=9 bytes_invalid=0 send_seq=142857 receive_seq=142857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=42.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.7  sysload=0.07 cputime=340.679 memavail=1624388 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=99.5 pwm=0.000
Stats 6282.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348294 bytes_read=2519632 bytes_retransmit=9 bytes_invalid=0 send_seq=142860 receive_seq=142860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.2  sysload=0.07 cputime=340.711 memavail=1624136 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=98.9 pwm=0.000
Stats 6283.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348300 bytes_read=2519798 bytes_retransmit=9 bytes_invalid=0 send_seq=142861 receive_seq=142861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.2  sysload=0.06 cputime=340.743 memavail=1624396 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=98.4 pwm=0.000
Stats 6284.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348330 bytes_read=2519959 bytes_retransmit=9 bytes_invalid=0 send_seq=142864 receive_seq=142864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.2  sysload=0.06 cputime=340.775 memavail=1624680 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=98.1 pwm=0.000
Stats 6285.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348336 bytes_read=2520140 bytes_retransmit=9 bytes_invalid=0 send_seq=142865 receive_seq=142865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=42.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.0  sysload=0.06 cputime=340.807 memavail=1624864 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=97.5 pwm=0.000
Stats 6286.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5348342 bytes_read=2520320 bytes_retransmit=9 bytes_invalid=0 send_seq=142866 receive_seq=142866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=42.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.2  sysload=0.06 cputime=340.839 memavail=1625084 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=97.2 pwm=0.000
Stats 6287.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5348372 bytes_read=2520481 bytes_retransmit=9 bytes_invalid=0 send_seq=142869 receive_seq=142869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=41.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=34.3  sysload=0.06 cputime=340.871 memavail=1625184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=96.8 pwm=0.000
Stats 6288.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5348378 bytes_read=2520662 bytes_retransmit=9 bytes_invalid=0 send_seq=142870 receive_seq=142870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=41.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.8  sysload=0.06 cputime=340.902 memavail=1625412 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=96.4 pwm=0.000
Stats 6289.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5348403 bytes_read=2520833 bytes_retransmit=9 bytes_invalid=0 send_seq=142872 receive_seq=142872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=41.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.6  sysload=0.06 cputime=340.934 memavail=1625160 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=96.0 pwm=0.000
Stats 6290.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5348409 bytes_read=2520984 bytes_retransmit=9 bytes_invalid=0 send_seq=142873 receive_seq=142873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=41.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.0  sysload=0.06 cputime=340.966 memavail=1624848 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=95.6 pwm=0.000
Stats 6291.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348415 bytes_read=2521179 bytes_retransmit=9 bytes_invalid=0 send_seq=142874 receive_seq=142874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=41.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.2  sysload=0.06 cputime=340.999 memavail=1624596 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=95.3 pwm=0.000
Stats 6292.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348459 bytes_read=2521355 bytes_retransmit=9 bytes_invalid=0 send_seq=142877 receive_seq=142877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=41.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.0  sysload=0.06 cputime=341.032 memavail=1624520 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=94.7 pwm=0.000
Stats 6293.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348465 bytes_read=2521506 bytes_retransmit=9 bytes_invalid=0 send_seq=142878 receive_seq=142878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=41.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.9  sysload=0.05 cputime=341.063 memavail=1624284 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=94.3 pwm=0.000
Stats 6294.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348490 bytes_read=2521692 bytes_retransmit=9 bytes_invalid=0 send_seq=142880 receive_seq=142880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=41.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.9  sysload=0.05 cputime=341.097 memavail=1624544 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=94.0 pwm=0.000
Stats 6295.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348539 bytes_read=2521873 bytes_retransmit=9 bytes_invalid=0 send_seq=142884 receive_seq=142884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=41.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.1  sysload=0.05 cputime=341.130 memavail=1624292 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=93.5 pwm=0.000
Stats 6296.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348545 bytes_read=2522039 bytes_retransmit=9 bytes_invalid=0 send_seq=142885 receive_seq=142885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=41.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.6  sysload=0.05 cputime=341.163 memavail=1624300 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=93.2 pwm=0.000
Stats 6297.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348575 bytes_read=2522230 bytes_retransmit=9 bytes_invalid=0 send_seq=142888 receive_seq=142888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=41.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.0  sysload=0.05 cputime=341.197 memavail=1624304 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=92.8 pwm=0.000
Stats 6298.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348581 bytes_read=2522396 bytes_retransmit=9 bytes_invalid=0 send_seq=142889 receive_seq=142889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=41.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.0  sysload=0.05 cputime=341.230 memavail=1624056 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=92.3 pwm=0.000
Stats 6299.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348606 bytes_read=2522552 bytes_retransmit=9 bytes_invalid=0 send_seq=142891 receive_seq=142891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=41.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.0  sysload=0.05 cputime=341.263 memavail=1624616 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=92.0 pwm=0.000
Stats 6300.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=5348612 bytes_read=2522733 bytes_retransmit=9 bytes_invalid=0 send_seq=142892 receive_seq=142892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=40.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.6  sysload=0.05 cputime=341.296 memavail=1624620 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=91.7 pwm=0.000
Stats 6301.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348618 bytes_read=2522913 bytes_retransmit=9 bytes_invalid=0 send_seq=142893 receive_seq=142893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=0 temp=40.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.0  sysload=0.05 cputime=341.328 memavail=1624620 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=91.2 pwm=0.000
Stats 6302.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348648 bytes_read=2523074 bytes_retransmit=9 bytes_invalid=0 send_seq=142896 receive_seq=142896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996430 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.0  sysload=0.05 cputime=341.361 memavail=1625184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=91.0 pwm=0.000
Stats 6303.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348654 bytes_read=2523255 bytes_retransmit=9 bytes_invalid=0 send_seq=142897 receive_seq=142897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=0 temp=40.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.6  sysload=0.04 cputime=341.394 memavail=1625184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=90.7 pwm=0.000
Stats 6304.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348684 bytes_read=2523431 bytes_retransmit=9 bytes_invalid=0 send_seq=142900 receive_seq=142900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.8  sysload=0.04 cputime=341.428 memavail=1624932 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=90.0 pwm=0.000
Stats 6305.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5348696 bytes_read=2523598 bytes_retransmit=9 bytes_invalid=0 send_seq=142902 receive_seq=142902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=40.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.7  sysload=0.04 cputime=341.460 memavail=1624940 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=89.7 pwm=0.000
Stats 6306.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348702 bytes_read=2523793 bytes_retransmit=9 bytes_invalid=0 send_seq=142903 receive_seq=142903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.8  sysload=0.04 cputime=341.493 memavail=1625004 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=89.3 pwm=0.000
Stats 6307.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348760 bytes_read=2523979 bytes_retransmit=9 bytes_invalid=0 send_seq=142908 receive_seq=142908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=32.9  sysload=0.04 cputime=341.527 memavail=1625280 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=88.8 pwm=0.000
Stats 6308.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348766 bytes_read=2524130 bytes_retransmit=9 bytes_invalid=0 send_seq=142909 receive_seq=142909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.3 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.5  sysload=0.04 cputime=341.558 memavail=1624752 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=88.6 pwm=0.000
Stats 6309.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348772 bytes_read=2524311 bytes_retransmit=9 bytes_invalid=0 send_seq=142910 receive_seq=142910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.5  sysload=0.04 cputime=341.591 memavail=1624776 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=88.3 pwm=0.000
Stats 6310.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348802 bytes_read=2524487 bytes_retransmit=9 bytes_invalid=0 send_seq=142913 receive_seq=142913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.3  sysload=0.04 cputime=341.625 memavail=1624792 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=87.8 pwm=0.000
Stats 6311.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5348808 bytes_read=2524652 bytes_retransmit=9 bytes_invalid=0 send_seq=142914 receive_seq=142914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.7  sysload=0.04 cputime=341.658 memavail=1624496 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=87.5 pwm=0.000
Stats 6312.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5348814 bytes_read=2524848 bytes_retransmit=9 bytes_invalid=0 send_seq=142915 receive_seq=142915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.4  sysload=0.04 cputime=341.691 memavail=1624496 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=87.1 pwm=0.000
Stats 6313.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5348844 bytes_read=2525006 bytes_retransmit=9 bytes_invalid=0 send_seq=142918 receive_seq=142918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.4  sysload=0.04 cputime=341.723 memavail=1624248 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=86.8 pwm=0.000
Stats 6314.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5348850 bytes_read=2525147 bytes_retransmit=9 bytes_invalid=0 send_seq=142919 receive_seq=142919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.3  sysload=0.04 cputime=341.756 memavail=1624496 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=86.7 pwm=0.000
Stats 6315.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5348856 bytes_read=2525330 bytes_retransmit=9 bytes_invalid=0 send_seq=142920 receive_seq=142920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=40.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.3  sysload=0.04 cputime=341.788 memavail=1624184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=86.2 pwm=0.000
Stats 6316.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348886 bytes_read=2525495 bytes_retransmit=9 bytes_invalid=0 send_seq=142923 receive_seq=142923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.4  sysload=0.04 cputime=341.821 memavail=1624436 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=85.7 pwm=0.000
Stats 6317.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348892 bytes_read=2525643 bytes_retransmit=9 bytes_invalid=0 send_seq=142924 receive_seq=142924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.6  sysload=0.04 cputime=341.851 memavail=1624324 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=85.4 pwm=0.000
Stats 6318.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348917 bytes_read=2525844 bytes_retransmit=9 bytes_invalid=0 send_seq=142926 receive_seq=142926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.3  sysload=0.03 cputime=341.875 memavail=1624132 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=85.1 pwm=0.000
Stats 6319.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348923 bytes_read=2525995 bytes_retransmit=9 bytes_invalid=0 send_seq=142927 receive_seq=142927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=39.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.1  sysload=0.03 cputime=341.897 memavail=1624288 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=84.8 pwm=0.000
Stats 6320.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348929 bytes_read=2526146 bytes_retransmit=9 bytes_invalid=0 send_seq=142928 receive_seq=142928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=40.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=32.5  sysload=0.03 cputime=341.928 memavail=1624648 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=84.5 pwm=0.000
Stats 6321.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348935 bytes_read=2526356 bytes_retransmit=9 bytes_invalid=0 send_seq=142929 receive_seq=142929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=40.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.4  sysload=0.03 cputime=341.963 memavail=1624960 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=84.2 pwm=0.000
Stats 6322.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348960 bytes_read=2526512 bytes_retransmit=9 bytes_invalid=0 send_seq=142931 receive_seq=142931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=0 temp=40.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.3  sysload=0.03 cputime=341.996 memavail=1625272 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=83.5 pwm=0.000
Stats 6323.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348966 bytes_read=2526663 bytes_retransmit=9 bytes_invalid=0 send_seq=142932 receive_seq=142932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=0 temp=39.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.9  sysload=0.03 cputime=342.028 memavail=1625212 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=83.3 pwm=0.000
Stats 6324.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5348996 bytes_read=2526869 bytes_retransmit=9 bytes_invalid=0 send_seq=142935 receive_seq=142935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.5  sysload=0.03 cputime=342.063 memavail=1625152 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=83.0 pwm=0.000
Stats 6325.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349002 bytes_read=2527020 bytes_retransmit=9 bytes_invalid=0 send_seq=142936 receive_seq=142936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=0 temp=39.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.0  sysload=0.03 cputime=342.096 memavail=1624900 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=82.7 pwm=0.000
Stats 6326.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349008 bytes_read=2527200 bytes_retransmit=9 bytes_invalid=0 send_seq=142937 receive_seq=142937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=0 temp=39.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=32.9  sysload=0.03 cputime=342.130 memavail=1624900 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=82.3 pwm=0.000
Stats 6327.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349033 bytes_read=2527386 bytes_retransmit=9 bytes_invalid=0 send_seq=142939 receive_seq=142939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=0 temp=39.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=32.1  sysload=0.03 cputime=342.165 memavail=1624648 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=82.2 pwm=0.000
Stats 6328.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349039 bytes_read=2527537 bytes_retransmit=9 bytes_invalid=0 send_seq=142940 receive_seq=142940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=0 temp=39.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.4  sysload=0.03 cputime=342.198 memavail=1624900 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=81.6 pwm=0.000
Stats 6329.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349045 bytes_read=2527703 bytes_retransmit=9 bytes_invalid=0 send_seq=142941 receive_seq=142941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=0 temp=39.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.0  sysload=0.03 cputime=342.222 memavail=1624456 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=81.2 pwm=0.000
Stats 6330.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349070 bytes_read=2527889 bytes_retransmit=9 bytes_invalid=0 send_seq=142943 receive_seq=142943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=0 temp=39.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.0  sysload=0.03 cputime=342.253 memavail=1624648 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=80.9 pwm=0.000
Stats 6331.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349076 bytes_read=2528054 bytes_retransmit=9 bytes_invalid=0 send_seq=142944 receive_seq=142944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996441 heater_bed: target=0 temp=39.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.8  sysload=0.03 cputime=342.286 memavail=1624396 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=80.7 pwm=0.000
Stats 6332.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349082 bytes_read=2528220 bytes_retransmit=9 bytes_invalid=0 send_seq=142945 receive_seq=142945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=0 temp=39.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=32.8  sysload=0.03 cputime=342.320 memavail=1624396 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=79.9 pwm=0.000
Stats 6333.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349112 bytes_read=2528411 bytes_retransmit=9 bytes_invalid=0 send_seq=142948 receive_seq=142948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=0 temp=39.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.0  sysload=0.02 cputime=342.355 memavail=1624648 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=79.9 pwm=0.000
Stats 6334.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349118 bytes_read=2528562 bytes_retransmit=9 bytes_invalid=0 send_seq=142949 receive_seq=142949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=0 temp=39.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.0  sysload=0.02 cputime=342.389 memavail=1625020 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=79.7 pwm=0.000
Stats 6335.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349152 bytes_read=2528738 bytes_retransmit=9 bytes_invalid=0 send_seq=142952 receive_seq=142952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=39.5 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.5  sysload=0.02 cputime=342.422 memavail=1625272 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=79.4 pwm=0.000
Stats 6336.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5349186 bytes_read=2528944 bytes_retransmit=9 bytes_invalid=0 send_seq=142955 receive_seq=142955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=39.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.1  sysload=0.02 cputime=342.456 memavail=1625332 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=78.9 pwm=0.000
Stats 6337.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5349192 bytes_read=2529095 bytes_retransmit=9 bytes_invalid=0 send_seq=142956 receive_seq=142956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=39.4 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=33.2  sysload=0.02 cputime=342.488 memavail=1625644 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=78.7 pwm=0.000
Stats 6338.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5349198 bytes_read=2529261 bytes_retransmit=9 bytes_invalid=0 send_seq=142957 receive_seq=142957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=32.7  sysload=0.02 cputime=342.520 memavail=1625896 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=78.5 pwm=0.000
Stats 6339.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5349228 bytes_read=2529452 bytes_retransmit=9 bytes_invalid=0 send_seq=142960 receive_seq=142960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.0  sysload=0.02 cputime=342.552 memavail=1625992 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=78.2 pwm=0.000
Stats 6340.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5349234 bytes_read=2529603 bytes_retransmit=9 bytes_invalid=0 send_seq=142961 receive_seq=142961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=39.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.4  sysload=0.02 cputime=342.584 memavail=1625680 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=77.9 pwm=0.000
Stats 6341.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349240 bytes_read=2529783 bytes_retransmit=9 bytes_invalid=0 send_seq=142962 receive_seq=142962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=0 temp=39.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.8  sysload=0.02 cputime=342.616 memavail=1625688 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=77.7 pwm=0.000
Stats 6342.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349246 bytes_read=2529964 bytes_retransmit=9 bytes_invalid=0 send_seq=142963 receive_seq=142963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=0 temp=39.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.9  sysload=0.02 cputime=342.650 memavail=1625688 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=77.6 pwm=0.000
Stats 6343.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349271 bytes_read=2530120 bytes_retransmit=9 bytes_invalid=0 send_seq=142965 receive_seq=142965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=0 temp=39.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.2  sysload=0.02 cputime=342.683 memavail=1625688 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=77.0 pwm=0.000
Stats 6344.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349277 bytes_read=2530286 bytes_retransmit=9 bytes_invalid=0 send_seq=142966 receive_seq=142966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=39.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.5  sysload=0.02 cputime=342.716 memavail=1625880 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=76.6 pwm=0.000
Stats 6345.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349283 bytes_read=2530467 bytes_retransmit=9 bytes_invalid=0 send_seq=142967 receive_seq=142967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=39.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.9  sysload=0.02 cputime=342.748 memavail=1625628 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=75.8 pwm=0.000
Stats 6346.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349313 bytes_read=2530628 bytes_retransmit=9 bytes_invalid=0 send_seq=142970 receive_seq=142970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=39.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.0  sysload=0.02 cputime=342.782 memavail=1625384 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=75.6 pwm=0.000
Stats 6347.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349319 bytes_read=2530808 bytes_retransmit=9 bytes_invalid=0 send_seq=142971 receive_seq=142971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=39.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.8  sysload=0.02 cputime=342.815 memavail=1625136 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=75.1 pwm=0.000
Stats 6348.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349349 bytes_read=2530999 bytes_retransmit=9 bytes_invalid=0 send_seq=142974 receive_seq=142974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=39.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=32.2  sysload=0.02 cputime=342.849 memavail=1625388 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=75.1 pwm=0.000
Stats 6349.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349355 bytes_read=2531150 bytes_retransmit=9 bytes_invalid=0 send_seq=142975 receive_seq=142975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=38.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.7  sysload=0.02 cputime=342.875 memavail=1625504 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=75.0 pwm=0.000
Stats 6350.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349361 bytes_read=2531316 bytes_retransmit=9 bytes_invalid=0 send_seq=142976 receive_seq=142976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=39.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.7  sysload=0.02 cputime=342.908 memavail=1625512 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=74.9 pwm=0.000
Stats 6351.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349367 bytes_read=2531497 bytes_retransmit=9 bytes_invalid=0 send_seq=142977 receive_seq=142977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=38.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.5  sysload=0.02 cputime=342.942 memavail=1625260 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=74.5 pwm=0.000
Stats 6352.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349373 bytes_read=2531662 bytes_retransmit=9 bytes_invalid=0 send_seq=142978 receive_seq=142978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.8  sysload=0.02 cputime=342.974 memavail=1625260 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=74.2 pwm=0.000
Stats 6353.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349398 bytes_read=2531833 bytes_retransmit=9 bytes_invalid=0 send_seq=142980 receive_seq=142980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.2  sysload=0.02 cputime=343.008 memavail=1625260 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=74.0 pwm=0.000
Stats 6354.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349404 bytes_read=2532014 bytes_retransmit=9 bytes_invalid=0 send_seq=142981 receive_seq=142981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=31.6  sysload=0.02 cputime=343.042 memavail=1625772 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=73.7 pwm=0.000
Stats 6355.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349410 bytes_read=2532165 bytes_retransmit=9 bytes_invalid=0 send_seq=142982 receive_seq=142982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=38.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=32.4  sysload=0.02 cputime=343.074 memavail=1625520 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=73.4 pwm=0.000
Stats 6356.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349440 bytes_read=2532341 bytes_retransmit=9 bytes_invalid=0 send_seq=142985 receive_seq=142985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.6  sysload=0.02 cputime=343.107 memavail=1625208 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=73.2 pwm=0.000
Stats 6357.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349446 bytes_read=2532536 bytes_retransmit=9 bytes_invalid=0 send_seq=142986 receive_seq=142986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=38.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.3  sysload=0.02 cputime=343.141 memavail=1625232 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=72.9 pwm=0.000
Stats 6358.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349471 bytes_read=2532692 bytes_retransmit=9 bytes_invalid=0 send_seq=142988 receive_seq=142988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=38.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.9  sysload=0.02 cputime=343.173 memavail=1625156 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=72.7 pwm=0.000
Stats 6359.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349477 bytes_read=2532858 bytes_retransmit=9 bytes_invalid=0 send_seq=142989 receive_seq=142989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=38.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.8  sysload=0.02 cputime=343.198 memavail=1624904 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=72.5 pwm=0.000
Stats 6360.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349502 bytes_read=2533044 bytes_retransmit=9 bytes_invalid=0 send_seq=142991 receive_seq=142991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.0  sysload=0.02 cputime=343.231 memavail=1625216 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=72.0 pwm=0.000
Stats 6361.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349508 bytes_read=2533195 bytes_retransmit=9 bytes_invalid=0 send_seq=142992 receive_seq=142992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=38.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.9  sysload=0.02 cputime=343.263 memavail=1625200 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=71.7 pwm=0.000
Stats 6362.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349514 bytes_read=2533375 bytes_retransmit=9 bytes_invalid=0 send_seq=142993 receive_seq=142993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.3  sysload=0.02 cputime=343.295 memavail=1624968 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=71.5 pwm=0.000
Stats 6363.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349544 bytes_read=2533566 bytes_retransmit=9 bytes_invalid=0 send_seq=142996 receive_seq=142996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.6  sysload=0.01 cputime=343.329 memavail=1625296 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=71.2 pwm=0.000
Stats 6364.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349550 bytes_read=2533717 bytes_retransmit=9 bytes_invalid=0 send_seq=142997 receive_seq=142997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.5  sysload=0.01 cputime=343.361 memavail=1625572 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=70.9 pwm=0.000
Stats 6365.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349556 bytes_read=2533898 bytes_retransmit=9 bytes_invalid=0 send_seq=142998 receive_seq=142998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.0  sysload=0.01 cputime=343.393 memavail=1625860 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=70.5 pwm=0.000
Stats 6366.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=5349592 bytes_read=2534090 bytes_retransmit=9 bytes_invalid=0 send_seq=143002 receive_seq=143002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.3  sysload=0.01 cputime=343.428 memavail=1625608 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=70.1 pwm=0.000
Stats 6367.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349598 bytes_read=2534255 bytes_retransmit=9 bytes_invalid=0 send_seq=143003 receive_seq=143003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.0  sysload=0.01 cputime=343.460 memavail=1625364 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=70.0 pwm=0.000
Stats 6368.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349604 bytes_read=2534436 bytes_retransmit=9 bytes_invalid=0 send_seq=143004 receive_seq=143004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=32.1  sysload=0.01 cputime=343.491 memavail=1625304 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=69.9 pwm=0.000
Stats 6369.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349610 bytes_read=2534602 bytes_retransmit=9 bytes_invalid=0 send_seq=143005 receive_seq=143005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.6  sysload=0.01 cputime=343.523 memavail=1625868 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=69.6 pwm=0.000
Stats 6370.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349616 bytes_read=2534753 bytes_retransmit=9 bytes_invalid=0 send_seq=143006 receive_seq=143006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=31.3  sysload=0.01 cputime=343.554 memavail=1625868 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=69.4 pwm=0.000
Stats 6371.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349650 bytes_read=2534944 bytes_retransmit=9 bytes_invalid=0 send_seq=143009 receive_seq=143009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.3  sysload=0.01 cputime=343.587 memavail=1626084 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=69.1 pwm=0.000
Stats 6372.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349656 bytes_read=2535124 bytes_retransmit=9 bytes_invalid=0 send_seq=143010 receive_seq=143010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.3  sysload=0.01 cputime=343.618 memavail=1626180 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=68.8 pwm=0.000
Stats 6373.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349662 bytes_read=2535268 bytes_retransmit=9 bytes_invalid=0 send_seq=143011 receive_seq=143011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.5  sysload=0.01 cputime=343.649 memavail=1626432 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=68.5 pwm=0.000
Stats 6374.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349668 bytes_read=2535437 bytes_retransmit=9 bytes_invalid=0 send_seq=143012 receive_seq=143012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=31.9  sysload=0.01 cputime=343.681 memavail=1626432 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=68.4 pwm=0.000
Stats 6375.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349698 bytes_read=2535602 bytes_retransmit=9 bytes_invalid=0 send_seq=143015 receive_seq=143015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.5  sysload=0.01 cputime=343.713 memavail=1625932 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=68.1 pwm=0.000
Stats 6376.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349704 bytes_read=2535743 bytes_retransmit=9 bytes_invalid=0 send_seq=143016 receive_seq=143016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.0  sysload=0.01 cputime=343.744 memavail=1625992 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=67.9 pwm=0.000
Stats 6377.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349710 bytes_read=2535938 bytes_retransmit=9 bytes_invalid=0 send_seq=143017 receive_seq=143017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.6  sysload=0.01 cputime=343.776 memavail=1625680 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=67.6 pwm=0.000
Stats 6378.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349716 bytes_read=2536104 bytes_retransmit=9 bytes_invalid=0 send_seq=143018 receive_seq=143018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=31.3  sysload=0.01 cputime=343.808 memavail=1625696 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=67.5 pwm=0.000
Stats 6379.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349722 bytes_read=2536255 bytes_retransmit=9 bytes_invalid=0 send_seq=143019 receive_seq=143019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=30.8  sysload=0.01 cputime=343.829 memavail=1625960 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=67.3 pwm=0.000
Stats 6380.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349747 bytes_read=2536441 bytes_retransmit=9 bytes_invalid=0 send_seq=143021 receive_seq=143021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.6  sysload=0.01 cputime=343.860 memavail=1626212 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=66.9 pwm=0.000
Stats 6381.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349753 bytes_read=2536607 bytes_retransmit=9 bytes_invalid=0 send_seq=143022 receive_seq=143022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.0  sysload=0.01 cputime=343.892 memavail=1625960 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=66.4 pwm=0.000
Stats 6382.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349759 bytes_read=2536772 bytes_retransmit=9 bytes_invalid=0 send_seq=143023 receive_seq=143023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=31.2  sysload=0.01 cputime=343.923 memavail=1625640 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=66.3 pwm=0.000
Stats 6383.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349784 bytes_read=2536958 bytes_retransmit=9 bytes_invalid=0 send_seq=143025 receive_seq=143025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=31.5  sysload=0.01 cputime=343.955 memavail=1625328 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=66.1 pwm=0.000
Stats 6384.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349790 bytes_read=2537124 bytes_retransmit=9 bytes_invalid=0 send_seq=143026 receive_seq=143026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=31.3  sysload=0.01 cputime=343.987 memavail=1624764 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=65.8 pwm=0.000
Stats 6385.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349796 bytes_read=2537275 bytes_retransmit=9 bytes_invalid=0 send_seq=143027 receive_seq=143027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.8  sysload=0.01 cputime=344.018 memavail=1624772 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=65.7 pwm=0.000
Stats 6386.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5349802 bytes_read=2537456 bytes_retransmit=9 bytes_invalid=0 send_seq=143028 receive_seq=143028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.2  sysload=0.01 cputime=344.049 memavail=1625032 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=65.4 pwm=0.000
Stats 6387.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349832 bytes_read=2537646 bytes_retransmit=9 bytes_invalid=0 send_seq=143031 receive_seq=143031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=31.1  sysload=0.01 cputime=344.082 memavail=1625032 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=65.1 pwm=0.000
Stats 6388.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349838 bytes_read=2537797 bytes_retransmit=9 bytes_invalid=0 send_seq=143032 receive_seq=143032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.9  sysload=0.01 cputime=344.113 memavail=1625040 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=64.9 pwm=0.000
Stats 6389.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349844 bytes_read=2537978 bytes_retransmit=9 bytes_invalid=0 send_seq=143033 receive_seq=143033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=0 temp=37.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.0  sysload=0.01 cputime=344.136 memavail=1625040 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=64.8 pwm=0.000
Stats 6390.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349850 bytes_read=2538144 bytes_retransmit=9 bytes_invalid=0 send_seq=143034 receive_seq=143034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=31.5  sysload=0.01 cputime=344.167 memavail=1625024 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=64.6 pwm=0.000
Stats 6391.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349856 bytes_read=2538295 bytes_retransmit=9 bytes_invalid=0 send_seq=143035 receive_seq=143035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.0  sysload=0.01 cputime=344.198 memavail=1625072 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=64.4 pwm=0.000
Stats 6392.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349886 bytes_read=2538500 bytes_retransmit=9 bytes_invalid=0 send_seq=143038 receive_seq=143038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=37.7 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=31.0  sysload=0.01 cputime=344.231 memavail=1624796 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=64.1 pwm=0.000
Stats 6393.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349892 bytes_read=2538666 bytes_retransmit=9 bytes_invalid=0 send_seq=143039 receive_seq=143039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=37.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.0  sysload=0.01 cputime=344.263 memavail=1625048 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=63.7 pwm=0.000
Stats 6394.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349898 bytes_read=2538817 bytes_retransmit=9 bytes_invalid=0 send_seq=143040 receive_seq=143040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.9  sysload=0.01 cputime=344.296 memavail=1625048 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=63.5 pwm=0.000
Stats 6395.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349928 bytes_read=2539008 bytes_retransmit=9 bytes_invalid=0 send_seq=143043 receive_seq=143043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=37.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=31.2  sysload=0.01 cputime=344.329 memavail=1625048 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=63.2 pwm=0.000
Stats 6396.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5349934 bytes_read=2539174 bytes_retransmit=9 bytes_invalid=0 send_seq=143044 receive_seq=143044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=37.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.6  sysload=0.01 cputime=344.360 memavail=1625304 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=63.0 pwm=0.000
Stats 6397.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349983 bytes_read=2539354 bytes_retransmit=9 bytes_invalid=0 send_seq=143048 receive_seq=143048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=37.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.9  sysload=0.01 cputime=344.393 memavail=1625220 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=62.8 pwm=0.000
Stats 6398.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349989 bytes_read=2539535 bytes_retransmit=9 bytes_invalid=0 send_seq=143049 receive_seq=143049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=37.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=30.6  sysload=0.17 cputime=344.425 memavail=1625260 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=62.7 pwm=0.000
Stats 6399.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5349995 bytes_read=2539701 bytes_retransmit=9 bytes_invalid=0 send_seq=143050 receive_seq=143050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=36.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.8  sysload=0.17 cputime=344.457 memavail=1624784 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=62.4 pwm=0.000
Stats 6400.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5350039 bytes_read=2539862 bytes_retransmit=9 bytes_invalid=0 send_seq=143053 receive_seq=143053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=36.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.2  sysload=0.17 cputime=344.478 memavail=1621980 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=62.2 pwm=0.000
Stats 6401.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=5350045 bytes_read=2540043 bytes_retransmit=9 bytes_invalid=0 send_seq=143054 receive_seq=143054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=37.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.8  sysload=0.17 cputime=344.510 memavail=1622524 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=62.0 pwm=0.000
Stats 6402.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5350051 bytes_read=2540224 bytes_retransmit=9 bytes_invalid=0 send_seq=143055 receive_seq=143055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=0 temp=37.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.9  sysload=0.17 cputime=344.543 memavail=1622840 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=61.8 pwm=0.000
Stats 6403.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5350057 bytes_read=2540375 bytes_retransmit=9 bytes_invalid=0 send_seq=143056 receive_seq=143056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=0 temp=36.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.6  sysload=0.15 cputime=344.575 memavail=1623100 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=61.7 pwm=0.000
Stats 6404.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5350063 bytes_read=2540556 bytes_retransmit=9 bytes_invalid=0 send_seq=143057 receive_seq=143057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=36.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=31.0  sysload=0.15 cputime=344.607 memavail=1623344 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=61.6 pwm=0.000
Stats 6405.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5350117 bytes_read=2540742 bytes_retransmit=9 bytes_invalid=0 send_seq=143062 receive_seq=143062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=36.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.4  sysload=0.15 cputime=344.641 memavail=1623656 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=60.9 pwm=0.000
Stats 6406.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=5350123 bytes_read=2540893 bytes_retransmit=9 bytes_invalid=0 send_seq=143063 receive_seq=143063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=0 temp=36.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.7  sysload=0.15 cputime=344.661 memavail=1622300 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=60.7 pwm=0.000
Stats 6407.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350129 bytes_read=2541088 bytes_retransmit=9 bytes_invalid=0 send_seq=143064 receive_seq=143064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=36.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.8  sysload=0.15 cputime=344.684 memavail=1622440 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=60.6 pwm=0.000
Stats 6408.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350135 bytes_read=2541254 bytes_retransmit=9 bytes_invalid=0 send_seq=143065 receive_seq=143065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=36.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.5  sysload=0.22 cputime=344.704 memavail=1621884 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=60.2 pwm=0.000
Stats 6409.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350165 bytes_read=2541415 bytes_retransmit=9 bytes_invalid=0 send_seq=143068 receive_seq=143068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=36.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=30.6  sysload=0.22 cputime=344.725 memavail=1617348 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=60.1 pwm=0.000
Stats 6410.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350171 bytes_read=2541596 bytes_retransmit=9 bytes_invalid=0 send_seq=143069 receive_seq=143069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=36.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=30.4  sysload=0.22 cputime=344.756 memavail=1622476 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=60.0 pwm=0.000
Stats 6411.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350177 bytes_read=2541762 bytes_retransmit=9 bytes_invalid=0 send_seq=143070 receive_seq=143070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=35.7 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=30.7  sysload=0.22 cputime=344.788 memavail=1622728 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=59.8 pwm=0.000
Stats 6412.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350183 bytes_read=2541927 bytes_retransmit=9 bytes_invalid=0 send_seq=143071 receive_seq=143071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=35.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.7  sysload=0.22 cputime=344.820 memavail=1622728 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=59.4 pwm=0.000
Stats 6413.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350212 bytes_read=2542113 bytes_retransmit=9 bytes_invalid=0 send_seq=143073 receive_seq=143073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.5  sysload=0.20 cputime=344.853 memavail=1622980 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=59.1 pwm=0.000
Stats 6414.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350218 bytes_read=2542279 bytes_retransmit=9 bytes_invalid=0 send_seq=143074 receive_seq=143074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.9  sysload=0.20 cputime=344.886 memavail=1622744 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=58.6 pwm=0.000
Stats 6415.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350224 bytes_read=2542430 bytes_retransmit=9 bytes_invalid=0 send_seq=143075 receive_seq=143075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.4  sysload=0.20 cputime=344.918 memavail=1622988 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=58.6 pwm=0.000
Stats 6416.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350230 bytes_read=2542611 bytes_retransmit=9 bytes_invalid=0 send_seq=143076 receive_seq=143076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.2  sysload=0.20 cputime=344.950 memavail=1622736 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=58.6 pwm=0.000
Stats 6417.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350279 bytes_read=2542792 bytes_retransmit=9 bytes_invalid=0 send_seq=143080 receive_seq=143080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=35.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.6  sysload=0.20 cputime=344.982 memavail=1621872 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=58.4 pwm=0.000
Stats 6418.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5350328 bytes_read=2542973 bytes_retransmit=9 bytes_invalid=0 send_seq=143084 receive_seq=143084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=35.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.6  sysload=0.19 cputime=345.006 memavail=1622236 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=58.3 pwm=0.000
Stats 6419.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5350334 bytes_read=2543154 bytes_retransmit=9 bytes_invalid=0 send_seq=143085 receive_seq=143085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.1  sysload=0.19 cputime=345.038 memavail=1622488 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=58.1 pwm=0.000
Stats 6420.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5350383 bytes_read=2543335 bytes_retransmit=9 bytes_invalid=0 send_seq=143089 receive_seq=143089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.4  sysload=0.19 cputime=345.070 memavail=1622488 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=57.8 pwm=0.000
Stats 6421.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5350389 bytes_read=2543486 bytes_retransmit=9 bytes_invalid=0 send_seq=143090 receive_seq=143090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.5  sysload=0.19 cputime=345.100 memavail=1622748 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=57.7 pwm=0.000
Stats 6422.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=5350395 bytes_read=2543667 bytes_retransmit=9 bytes_invalid=0 send_seq=143091 receive_seq=143091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.1  sysload=0.19 cputime=345.129 memavail=1621932 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=57.4 pwm=0.000
Stats 6423.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5350420 bytes_read=2543853 bytes_retransmit=9 bytes_invalid=0 send_seq=143093 receive_seq=143093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.3  sysload=0.17 cputime=345.153 memavail=1622184 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=57.1 pwm=0.000
Stats 6424.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5350426 bytes_read=2544004 bytes_retransmit=9 bytes_invalid=0 send_seq=143094 receive_seq=143094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.2  sysload=0.17 cputime=345.185 memavail=1622688 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=57.0 pwm=0.000
Stats 6425.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5350432 bytes_read=2544185 bytes_retransmit=9 bytes_invalid=0 send_seq=143095 receive_seq=143095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.3  sysload=0.17 cputime=345.218 memavail=1622940 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=56.9 pwm=0.000
Stats 6426.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5350438 bytes_read=2544351 bytes_retransmit=9 bytes_invalid=0 send_seq=143096 receive_seq=143096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.2  sysload=0.17 cputime=345.247 memavail=1622788 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=56.7 pwm=0.000
Stats 6427.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=5350450 bytes_read=2544502 bytes_retransmit=9 bytes_invalid=0 send_seq=143098 receive_seq=143097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.2  sysload=0.17 cputime=345.279 memavail=1622788 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=56.5 pwm=0.000
Stats 6428.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350480 bytes_read=2544723 bytes_retransmit=9 bytes_invalid=0 send_seq=143101 receive_seq=143101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=29.8  sysload=0.16 cputime=345.313 memavail=1622536 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=56.3 pwm=0.000
Stats 6429.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350486 bytes_read=2544889 bytes_retransmit=9 bytes_invalid=0 send_seq=143102 receive_seq=143102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.2  sysload=0.16 cputime=345.337 memavail=1622484 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=56.1 pwm=0.000
Stats 6430.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350492 bytes_read=2545040 bytes_retransmit=9 bytes_invalid=0 send_seq=143103 receive_seq=143103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.4  sysload=0.16 cputime=345.365 memavail=1622724 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.9 pwm=0.000
Stats 6431.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350498 bytes_read=2545221 bytes_retransmit=9 bytes_invalid=0 send_seq=143104 receive_seq=143104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.1  sysload=0.16 cputime=345.397 memavail=1622412 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.9 pwm=0.000
Stats 6432.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350504 bytes_read=2545386 bytes_retransmit=9 bytes_invalid=0 send_seq=143105 receive_seq=143105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.2  sysload=0.16 cputime=345.428 memavail=1622604 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.5 pwm=0.000
Stats 6433.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350510 bytes_read=2545540 bytes_retransmit=9 bytes_invalid=0 send_seq=143106 receive_seq=143106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996478 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.0  sysload=0.22 cputime=345.460 memavail=1622604 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.4 pwm=0.000
Stats 6434.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350535 bytes_read=2545714 bytes_retransmit=9 bytes_invalid=0 send_seq=143108 receive_seq=143108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.9  sysload=0.22 cputime=345.494 memavail=1622352 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.4 pwm=0.000
Stats 6435.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350541 bytes_read=2545869 bytes_retransmit=9 bytes_invalid=0 send_seq=143109 receive_seq=143109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.1  sysload=0.22 cputime=345.527 memavail=1622360 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.3 pwm=0.000
Stats 6436.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350547 bytes_read=2546013 bytes_retransmit=9 bytes_invalid=0 send_seq=143110 receive_seq=143110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.7  sysload=0.22 cputime=345.561 memavail=1622364 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=54.9 pwm=0.000
Stats 6437.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350553 bytes_read=2546194 bytes_retransmit=9 bytes_invalid=0 send_seq=143111 receive_seq=143111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996481 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.4  sysload=0.22 cputime=345.595 memavail=1622616 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=55.0 pwm=0.000
Stats 6438.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350559 bytes_read=2546374 bytes_retransmit=9 bytes_invalid=0 send_seq=143112 receive_seq=143112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.8  sysload=0.21 cputime=345.628 memavail=1623120 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=54.4 pwm=0.000
Stats 6439.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350565 bytes_read=2546525 bytes_retransmit=9 bytes_invalid=0 send_seq=143113 receive_seq=143113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.8  sysload=0.21 cputime=345.653 memavail=1622496 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=54.2 pwm=0.000
Stats 6440.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350595 bytes_read=2546716 bytes_retransmit=9 bytes_invalid=0 send_seq=143116 receive_seq=143116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.8  sysload=0.21 cputime=345.672 memavail=1622904 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.9 pwm=0.000
Stats 6441.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350601 bytes_read=2546882 bytes_retransmit=9 bytes_invalid=0 send_seq=143117 receive_seq=143117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=0 temp=34.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=30.0  sysload=0.21 cputime=345.704 memavail=1622904 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.8 pwm=0.000
Stats 6442.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350607 bytes_read=2547033 bytes_retransmit=9 bytes_invalid=0 send_seq=143118 receive_seq=143118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.1  sysload=0.21 cputime=345.736 memavail=1622656 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.6 pwm=0.000
Stats 6443.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350613 bytes_read=2547228 bytes_retransmit=9 bytes_invalid=0 send_seq=143119 receive_seq=143119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.3  sysload=0.19 cputime=345.769 memavail=1622648 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.5 pwm=0.000
Stats 6444.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350638 bytes_read=2547399 bytes_retransmit=9 bytes_invalid=0 send_seq=143121 receive_seq=143121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=0 temp=34.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.9  sysload=0.19 cputime=345.804 memavail=1622652 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.3 pwm=0.000
Stats 6445.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350644 bytes_read=2547550 bytes_retransmit=9 bytes_invalid=0 send_seq=143122 receive_seq=143122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.8  sysload=0.19 cputime=345.836 memavail=1622412 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.2 pwm=0.000
Stats 6446.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350650 bytes_read=2547731 bytes_retransmit=9 bytes_invalid=0 send_seq=143123 receive_seq=143123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=0 temp=34.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.8  sysload=0.19 cputime=345.871 memavail=1622724 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=53.1 pwm=0.000
Stats 6447.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350656 bytes_read=2547897 bytes_retransmit=9 bytes_invalid=0 send_seq=143124 receive_seq=143124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=34.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.0  sysload=0.19 cputime=345.899 memavail=1623416 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=52.9 pwm=0.000
Stats 6448.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350662 bytes_read=2548062 bytes_retransmit=9 bytes_invalid=0 send_seq=143125 receive_seq=143125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=0 temp=34.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=29.5  sysload=0.17 cputime=345.924 memavail=1623516 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=52.7 pwm=0.000
Stats 6449.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350668 bytes_read=2548243 bytes_retransmit=9 bytes_invalid=0 send_seq=143126 receive_seq=143126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=0 temp=34.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.8  sysload=0.17 cputime=345.959 memavail=1623460 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=52.6 pwm=0.000
Stats 6450.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350674 bytes_read=2548409 bytes_retransmit=9 bytes_invalid=0 send_seq=143127 receive_seq=143127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=0 temp=34.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.0  sysload=0.17 cputime=345.993 memavail=1623464 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=52.3 pwm=0.000
Stats 6451.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350704 bytes_read=2548570 bytes_retransmit=9 bytes_invalid=0 send_seq=143130 receive_seq=143130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=0 temp=34.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=30.1  sysload=0.17 cputime=346.026 memavail=1622908 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=52.3 pwm=0.000
Stats 6452.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350710 bytes_read=2548751 bytes_retransmit=9 bytes_invalid=0 send_seq=143131 receive_seq=143131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=0 temp=34.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.8  sysload=0.17 cputime=346.060 memavail=1622656 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=52.1 pwm=0.000
Stats 6453.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350716 bytes_read=2548931 bytes_retransmit=9 bytes_invalid=0 send_seq=143132 receive_seq=143132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.3  sysload=0.16 cputime=346.095 memavail=1622656 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=51.9 pwm=0.000
Stats 6454.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350722 bytes_read=2549082 bytes_retransmit=9 bytes_invalid=0 send_seq=143133 receive_seq=143133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.9  sysload=0.16 cputime=346.127 memavail=1622656 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=51.9 pwm=0.000
Stats 6455.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350728 bytes_read=2549278 bytes_retransmit=9 bytes_invalid=0 send_seq=143134 receive_seq=143134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.9  sysload=0.16 cputime=346.154 memavail=1622656 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=51.5 pwm=0.000
Stats 6456.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350734 bytes_read=2549429 bytes_retransmit=9 bytes_invalid=0 send_seq=143135 receive_seq=143135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.9  sysload=0.16 cputime=346.176 memavail=1622288 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=51.5 pwm=0.000
Stats 6457.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=5350759 bytes_read=2549585 bytes_retransmit=9 bytes_invalid=0 send_seq=143137 receive_seq=143137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.9  sysload=0.16 cputime=346.201 memavail=1621796 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=51.1 pwm=0.000
Stats 6458.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350765 bytes_read=2549795 bytes_retransmit=9 bytes_invalid=0 send_seq=143138 receive_seq=143138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=0 temp=34.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.8  sysload=0.71 cputime=346.237 memavail=1622108 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=51.0 pwm=0.000
Stats 6459.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350795 bytes_read=2549956 bytes_retransmit=9 bytes_invalid=0 send_seq=143141 receive_seq=143141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=29.8  sysload=0.71 cputime=346.266 memavail=1621080 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=50.8 pwm=0.000
Stats 6460.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350801 bytes_read=2550107 bytes_retransmit=9 bytes_invalid=0 send_seq=143142 receive_seq=143142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=34.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.6  sysload=0.71 cputime=346.292 memavail=1620904 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=50.4 pwm=0.000
Stats 6461.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350826 bytes_read=2550308 bytes_retransmit=9 bytes_invalid=0 send_seq=143144 receive_seq=143144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=0 temp=34.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.9  sysload=0.71 cputime=346.317 memavail=1621000 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=50.2 pwm=0.000
Stats 6462.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=5350832 bytes_read=2550459 bytes_retransmit=9 bytes_invalid=0 send_seq=143145 receive_seq=143145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=0 temp=34.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=29.7  sysload=0.71 cputime=346.350 memavail=1621240 print_time=6123.387 buffer_time=0.000 print_stall=10 extruder: target=0 temp=50.1 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-217-g309b8e03'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 00:44:10 2021 (1640907850.7 6575.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041533864: New connection
webhooks client 3041533864: Client info {'program': 'Moonraker', 'version': 'v0.7.1-253-g3e70e4b'}
mcu 'mcu': got {'#receive_time': 6576.872799839, u'next_clock': 1735517440, u'oid': 26, u'value': 30422, '#name': u'analog_in_state', '#sent_time': 6576.830988135}
mcu 'mcu': got {'#receive_time': 6577.082845857, u'next_clock': 1750637440, u'oid': 17, u'value': 30799, '#name': u'analog_in_state', '#sent_time': 6577.037040913}
mcu 'mcu': got {'#receive_time': 6577.112832413, u'next_clock': 1752797440, u'oid': 20, u'value': 14074, '#name': u'analog_in_state', '#sent_time': 6577.087849394}
mcu 'mcu': got {'#receive_time': 6577.172922653, u'next_clock': 1757117440, u'oid': 26, u'value': 30461, '#name': u'analog_in_state', '#sent_time': 6577.139220246}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3041533864
webhooks: registering remote method 'reboot_machine' for connection id: 3041533864
webhooks: registering remote method 'pause_job_queue' for connection id: 3041533864
webhooks: registering remote method 'start_job_queue' for connection id: 3041533864
Sending BLTOUCH_DEBUG COMMAND=reset
Stats 6591.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=7504 bytes_read=8058 bytes_retransmit=0 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996478 heater_bed: target=0 temp=30.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.3  sysload=2.67 cputime=1.938 memavail=1606324 print_time=6601.184 buffer_time=0.901 print_stall=0 extruder: target=0 temp=35.2 pwm=0.000
Stats 6592.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=7565 bytes_read=8229 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=0 temp=30.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.6  sysload=2.67 cputime=1.968 memavail=1606244 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.5 pwm=0.000
Stats 6593.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=7647 bytes_read=8430 bytes_retransmit=0 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=30.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.6  sysload=2.46 cputime=2.000 memavail=1605716 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.3 pwm=0.000
Stats 6594.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=7653 bytes_read=8581 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.8  sysload=2.46 cputime=2.033 memavail=1605668 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.2 pwm=0.000
Stats 6595.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000043 bytes_write=7659 bytes_read=8762 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.0  sysload=2.46 cputime=2.063 memavail=1605884 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.1 pwm=0.000
Stats 6596.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000043 bytes_write=7665 bytes_read=8943 bytes_retransmit=0 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.3  sysload=2.46 cputime=2.095 memavail=1606096 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.9 pwm=0.000
Stats 6597.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000043 bytes_write=7671 bytes_read=9094 bytes_retransmit=0 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=0 temp=30.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.5  sysload=2.46 cputime=2.122 memavail=1605664 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.9 pwm=0.000
Stats 6598.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000043 bytes_write=7677 bytes_read=9260 bytes_retransmit=0 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=28.2  sysload=2.26 cputime=2.151 memavail=1605372 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.9 pwm=0.000
Stats 6599.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000014 mcu_task_stddev=0.000043 bytes_write=7683 bytes_read=9441 bytes_retransmit=0 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.2  sysload=2.26 cputime=2.179 memavail=1605880 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.8 pwm=0.000
Stats 6600.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7689 bytes_read=9606 bytes_retransmit=0 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=30.5 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.8  sysload=2.26 cputime=2.203 memavail=1605868 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.6 pwm=0.000
Stats 6601.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7695 bytes_read=9772 bytes_retransmit=0 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=30.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.4  sysload=2.26 cputime=2.233 memavail=1606160 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.7 pwm=0.000
webhooks client 3041533864: Disconnected
Stats 6602.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7701 bytes_read=9953 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.6  sysload=2.26 cputime=2.265 memavail=1605720 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.5 pwm=0.000
Stats 6603.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7707 bytes_read=10104 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=30.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.4  sysload=2.16 cputime=2.279 memavail=1615016 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.6 pwm=0.000
Stats 6604.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7713 bytes_read=10270 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=28.0  sysload=2.16 cputime=2.293 memavail=1617648 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.4 pwm=0.000
Stats 6605.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7743 bytes_read=10475 bytes_retransmit=0 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=27.6  sysload=2.16 cputime=2.314 memavail=1617648 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.4 pwm=0.000
Stats 6606.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7749 bytes_read=10626 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=0 temp=29.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=27.5  sysload=2.16 cputime=2.332 memavail=1622752 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.3 pwm=0.000
Stats 6607.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7755 bytes_read=10792 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=29.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.5  sysload=2.16 cputime=2.342 memavail=1676288 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.3 pwm=0.000
Stats 6608.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7761 bytes_read=10973 bytes_retransmit=0 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.5  sysload=1.99 cputime=2.357 memavail=1676348 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.3 pwm=0.000
Stats 6609.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7767 bytes_read=11124 bytes_retransmit=0 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996472 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.6  sysload=1.99 cputime=2.374 memavail=1675164 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.3 pwm=0.000
Stats 6610.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7773 bytes_read=11304 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.6  sysload=1.99 cputime=2.384 memavail=1661352 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=34.0 pwm=0.000
Stats 6611.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7779 bytes_read=11483 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=0 temp=30.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.6  sysload=1.99 cputime=2.395 memavail=1648248 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.9 pwm=0.000
Stats 6612.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7785 bytes_read=11625 bytes_retransmit=0 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=0 temp=30.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.6  sysload=1.99 cputime=2.406 memavail=1640828 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.9 pwm=0.000
Stats 6613.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7791 bytes_read=11780 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=29.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.7  sysload=2.31 cputime=2.418 memavail=1650784 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.7 pwm=0.000
Stats 6614.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7797 bytes_read=11949 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=27.7  sysload=2.31 cputime=2.430 memavail=1645372 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.5 pwm=0.000
Stats 6615.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7803 bytes_read=12107 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=27.2  sysload=2.31 cputime=2.442 memavail=1648056 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.4 pwm=0.000
Stats 6616.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7809 bytes_read=12273 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.4  sysload=2.31 cputime=2.454 memavail=1631296 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.5 pwm=0.000
Stats 6617.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7815 bytes_read=12454 bytes_retransmit=0 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.7  sysload=2.31 cputime=2.467 memavail=1623064 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.6 pwm=0.000
Stats 6618.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7821 bytes_read=12605 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1 freq=71996475 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=27.3  sysload=2.52 cputime=2.481 memavail=1617760 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.3 pwm=0.000
Stats 6619.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7852 bytes_read=12792 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.7  sysload=2.52 cputime=2.496 memavail=1616116 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.3 pwm=0.000
Stats 6620.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7858 bytes_read=12987 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.6  sysload=2.52 cputime=2.509 memavail=1615876 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.3 pwm=0.000
Stats 6621.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7910 bytes_read=13148 bytes_retransmit=0 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=29.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=27.9  sysload=2.52 cputime=2.520 memavail=1614044 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.4 pwm=0.000
Stats 6622.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7916 bytes_read=13314 bytes_retransmit=0 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=27.8  sysload=2.52 cputime=2.533 memavail=1620712 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.3 pwm=0.000
Stats 6623.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7922 bytes_read=13495 bytes_retransmit=0 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=29.6 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=27.2  sysload=2.56 cputime=2.546 memavail=1615292 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.2 pwm=0.000
webhooks client 3041836448: New connection
webhooks client 3041836448: Client info {'program': 'Moonraker', 'version': 'v0.7.1-253-g3e70e4b'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3041836448
webhooks: registering remote method 'reboot_machine' for connection id: 3041836448
webhooks: registering remote method 'pause_job_queue' for connection id: 3041836448
webhooks: registering remote method 'start_job_queue' for connection id: 3041836448
Stats 6624.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7928 bytes_read=13646 bytes_retransmit=0 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.6  sysload=2.56 cputime=2.571 memavail=1615464 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.1 pwm=0.000
Stats 6625.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=7934 bytes_read=13827 bytes_retransmit=0 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=27.6  sysload=2.56 cputime=2.591 memavail=1619044 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.1 pwm=0.000
Stats 6626.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=7963 bytes_read=14013 bytes_retransmit=0 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.8  sysload=2.56 cputime=2.606 memavail=1619428 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.3 pwm=0.000
Stats 6627.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=7969 bytes_read=14164 bytes_retransmit=0 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=27.6  sysload=2.56 cputime=2.618 memavail=1664084 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.1 pwm=0.000
Stats 6628.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=7975 bytes_read=14330 bytes_retransmit=0 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=0 temp=29.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.8  sysload=2.36 cputime=2.635 memavail=1664764 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.2 pwm=0.000
Stats 6629.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=8037 bytes_read=14531 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.7  sysload=2.36 cputime=2.660 memavail=1664764 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.1 pwm=0.000
Stats 6630.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=8043 bytes_read=14697 bytes_retransmit=0 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.8  sysload=2.36 cputime=2.683 memavail=1665016 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.1 pwm=0.000
Stats 6631.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=8049 bytes_read=14863 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996497 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.4  sysload=2.36 cputime=2.704 memavail=1665256 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.0 pwm=0.000
Stats 6632.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=8055 bytes_read=15044 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.4  sysload=2.36 cputime=2.727 memavail=1658712 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.0 pwm=0.000
Stats 6633.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=8061 bytes_read=15195 bytes_retransmit=0 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.5  sysload=2.25 cputime=2.741 memavail=1641828 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.0 pwm=0.000
Stats 6634.6: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=8067 bytes_read=15361 bytes_retransmit=0 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.6  sysload=2.25 cputime=2.755 memavail=1638736 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.0 pwm=0.000
Stats 6635.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8073 bytes_read=15556 bytes_retransmit=0 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.2  sysload=2.25 cputime=2.770 memavail=1622128 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 6636.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8079 bytes_read=15707 bytes_retransmit=0 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=27.7  sysload=2.25 cputime=2.791 memavail=1621092 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 6637.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8085 bytes_read=15888 bytes_retransmit=0 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.2  sysload=2.25 cputime=2.814 memavail=1621144 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=33.0 pwm=0.000
Stats 6638.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8091 bytes_read=16054 bytes_retransmit=0 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.6  sysload=2.07 cputime=2.838 memavail=1621104 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 6639.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8097 bytes_read=16205 bytes_retransmit=0 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996509 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.7  sysload=2.07 cputime=2.861 memavail=1621212 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.9 pwm=0.000
Stats 6640.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8103 bytes_read=16400 bytes_retransmit=0 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.3  sysload=2.07 cputime=2.885 memavail=1621264 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 6641.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8109 bytes_read=16566 bytes_retransmit=0 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.0  sysload=2.07 cputime=2.909 memavail=1621260 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 6642.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8115 bytes_read=16717 bytes_retransmit=0 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.5  sysload=2.07 cputime=2.933 memavail=1620980 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.5 pwm=0.000
Stats 6643.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8145 bytes_read=16908 bytes_retransmit=0 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.5  sysload=1.90 cputime=2.957 memavail=1621112 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.6 pwm=0.000
Stats 6644.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=8151 bytes_read=17074 bytes_retransmit=0 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996509 heater_bed: target=0 temp=29.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.4  sysload=1.90 cputime=2.973 memavail=1621116 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.6 pwm=0.000
Stats 6645.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8157 bytes_read=17239 bytes_retransmit=0 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=0 temp=29.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.7  sysload=1.90 cputime=2.997 memavail=1621076 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 6646.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8163 bytes_read=17405 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=0 temp=29.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.5  sysload=1.90 cputime=3.011 memavail=1621456 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=32.2 pwm=0.000
Stats 6647.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8169 bytes_read=17586 bytes_retransmit=0 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=0 temp=29.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.7  sysload=1.90 cputime=3.035 memavail=1621516 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.4 pwm=0.000
Stats 6648.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8175 bytes_read=17737 bytes_retransmit=0 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.4  sysload=1.75 cputime=3.059 memavail=1621564 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 6649.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8200 bytes_read=17923 bytes_retransmit=0 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=0 temp=29.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.2  sysload=1.75 cputime=3.084 memavail=1621384 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 6650.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8206 bytes_read=18089 bytes_retransmit=0 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.0  sysload=1.75 cputime=3.109 memavail=1621084 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.9 pwm=0.000
Stats 6651.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8212 bytes_read=18254 bytes_retransmit=0 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=0 temp=29.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.4  sysload=1.75 cputime=3.133 memavail=1621048 print_time=6601.184 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 6665.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=8838 bytes_read=20980 bytes_retransmit=0 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=29.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.2  sysload=1.36 cputime=3.529 memavail=1620896 print_time=6676.446 buffer_time=2.122 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 6666.6: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=8952 bytes_read=21212 bytes_retransmit=0 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=28.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=27.4  sysload=1.36 cputime=3.565 memavail=1620896 print_time=6676.447 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 6667.6: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=9143 bytes_read=21565 bytes_retransmit=0 bytes_invalid=0 send_seq=438 receive_seq=437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=29.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=27.4  sysload=1.36 cputime=3.609 memavail=1621004 print_time=6676.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.8 pwm=0.000
Stats 6668.6: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10380 bytes_read=22683 bytes_retransmit=0 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=0 temp=28.9 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.1  sysload=1.25 cputime=3.717 memavail=1620940 print_time=6677.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.9 pwm=0.000
Stats 6669.6: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=10838 bytes_read=23257 bytes_retransmit=0 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=28.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.4  sysload=1.25 cputime=3.779 memavail=1620836 print_time=6678.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Stats 6670.6: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=11308 bytes_read=23866 bytes_retransmit=0 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996532 heater_bed: target=0 temp=28.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.1  sysload=1.25 cputime=3.837 memavail=1620580 print_time=6679.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 6671.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=11774 bytes_read=24467 bytes_retransmit=0 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996532 heater_bed: target=0 temp=28.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.6  sysload=1.25 cputime=3.895 memavail=1620912 print_time=6680.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 6672.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=12233 bytes_read=25025 bytes_retransmit=0 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996531 heater_bed: target=0 temp=29.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.2  sysload=1.25 cputime=3.955 memavail=1621172 print_time=6681.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 6673.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=12873 bytes_read=25632 bytes_retransmit=0 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=29.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.2  sysload=1.15 cputime=4.017 memavail=1621108 print_time=6682.486 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 6674.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=13514 bytes_read=26092 bytes_retransmit=0 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996528 heater_bed: target=0 temp=28.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.1  sysload=1.15 cputime=4.079 memavail=1621092 print_time=6686.928 buffer_time=3.599 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 6675.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=13655 bytes_read=26393 bytes_retransmit=0 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996527 heater_bed: target=0 temp=29.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.4  sysload=1.15 cputime=4.120 memavail=1621156 print_time=6686.928 buffer_time=2.598 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 6676.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=13811 bytes_read=26737 bytes_retransmit=0 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996526 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.0  sysload=1.15 cputime=4.163 memavail=1620912 print_time=6686.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 6677.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=13941 bytes_read=27051 bytes_retransmit=0 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=26.9  sysload=1.15 cputime=4.205 memavail=1621116 print_time=6686.930 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 6678.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14269 bytes_read=27470 bytes_retransmit=0 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=28.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.0  sysload=1.06 cputime=4.255 memavail=1621272 print_time=6687.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 6679.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14704 bytes_read=28044 bytes_retransmit=0 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=0 temp=28.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.2  sysload=1.06 cputime=4.312 memavail=1621088 print_time=6688.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 6680.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=15135 bytes_read=28609 bytes_retransmit=0 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=26.9  sysload=1.06 cputime=4.370 memavail=1621308 print_time=6689.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 6681.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=15560 bytes_read=29158 bytes_retransmit=0 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=28.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.3  sysload=1.06 cputime=4.427 memavail=1621096 print_time=6690.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Stats 6682.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=15980 bytes_read=29717 bytes_retransmit=0 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.5  sysload=1.06 cputime=4.483 memavail=1620648 print_time=6691.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 6683.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=16415 bytes_read=30276 bytes_retransmit=0 bytes_invalid=0 send_seq=895 receive_seq=895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=0 temp=28.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.7  sysload=1.05 cputime=4.537 memavail=1621004 print_time=6692.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 6684.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=16835 bytes_read=30805 bytes_retransmit=0 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.3  sysload=1.05 cputime=4.594 memavail=1621044 print_time=6693.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 6685.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=17260 bytes_read=31369 bytes_retransmit=0 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.6  sysload=1.05 cputime=4.650 memavail=1620876 print_time=6694.530 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 6686.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=17860 bytes_read=31969 bytes_retransmit=0 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=18 freq=71996524 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.6  sysload=1.05 cputime=4.715 memavail=1620796 print_time=6698.245 buffer_time=2.909 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 6687.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=17998 bytes_read=32258 bytes_retransmit=0 bytes_invalid=0 send_seq=991 receive_seq=991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996528 heater_bed: target=0 temp=28.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.6  sysload=1.05 cputime=4.758 memavail=1620648 print_time=6698.247 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 6688.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=18128 bytes_read=32587 bytes_retransmit=0 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.2  sysload=1.05 cputime=4.798 memavail=1620784 print_time=6698.247 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 6689.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=18316 bytes_read=32930 bytes_retransmit=0 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996530 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=27.3  sysload=1.05 cputime=4.841 memavail=1620812 print_time=6698.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 6690.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000010 bytes_write=18721 bytes_read=33464 bytes_retransmit=0 bytes_invalid=0 send_seq=1040 receive_seq=1040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.1  sysload=1.05 cputime=4.896 memavail=1620656 print_time=6699.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 6691.6: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=19190 bytes_read=34149 bytes_retransmit=0 bytes_invalid=0 send_seq=1074 receive_seq=1074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=26 freq=71996528 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.8  sysload=1.05 cputime=4.962 memavail=1620752 print_time=6701.560 buffer_time=1.221 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 6692.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=19514 bytes_read=34483 bytes_retransmit=0 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.2  sysload=1.05 cputime=5.010 memavail=1620692 print_time=6702.797 buffer_time=1.457 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 6693.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=19604 bytes_read=34772 bytes_retransmit=0 bytes_invalid=0 send_seq=1094 receive_seq=1094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.5  sysload=0.97 cputime=5.049 memavail=1618412 print_time=6702.797 buffer_time=0.456 print_stall=0 extruder: target=0 temp=29.1 pwm=0.000
Stats 6694.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=19694 bytes_read=35091 bytes_retransmit=0 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996534 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.4  sysload=0.97 cputime=5.083 memavail=1617312 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 6695.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=19836 bytes_read=35405 bytes_retransmit=0 bytes_invalid=0 send_seq=1110 receive_seq=1110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996534 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.8  sysload=0.97 cputime=5.127 memavail=1617428 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.8 pwm=0.000
Stats 6696.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=19926 bytes_read=35709 bytes_retransmit=0 bytes_invalid=0 send_seq=1117 receive_seq=1117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.5  sysload=0.97 cputime=5.170 memavail=1617452 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 6697.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=20016 bytes_read=36028 bytes_retransmit=0 bytes_invalid=0 send_seq=1124 receive_seq=1124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=27.9  sysload=0.97 cputime=5.209 memavail=1617492 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 6698.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=20106 bytes_read=36332 bytes_retransmit=0 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.9  sysload=0.97 cputime=5.250 memavail=1617440 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 6699.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=20196 bytes_read=36621 bytes_retransmit=0 bytes_invalid=0 send_seq=1138 receive_seq=1138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=27.8  sysload=0.97 cputime=5.282 memavail=1611700 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 6700.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=20286 bytes_read=36940 bytes_retransmit=0 bytes_invalid=0 send_seq=1145 receive_seq=1145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.5  sysload=0.97 cputime=5.309 memavail=1597500 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.9 pwm=0.000
Stats 6701.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=20400 bytes_read=37268 bytes_retransmit=0 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=28.2  sysload=0.97 cputime=5.337 memavail=1585212 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 6702.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=20514 bytes_read=37567 bytes_retransmit=0 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996532 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.9  sysload=0.97 cputime=5.366 memavail=1611308 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 6703.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=20604 bytes_read=37886 bytes_retransmit=0 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=27.9  sysload=0.97 cputime=5.395 memavail=1608536 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 6704.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=20694 bytes_read=38190 bytes_retransmit=0 bytes_invalid=0 send_seq=1177 receive_seq=1177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996532 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=28.1  sysload=0.97 cputime=5.424 memavail=1616272 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.7 pwm=0.000
Stats 6705.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=20784 bytes_read=38479 bytes_retransmit=0 bytes_invalid=0 send_seq=1184 receive_seq=1184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=28.0  sysload=0.97 cputime=5.455 memavail=1614188 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 6706.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=20874 bytes_read=38813 bytes_retransmit=0 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996538 heater_bed: target=0 temp=28.7 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=28.6  sysload=0.97 cputime=5.484 memavail=1615312 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 6707.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=20983 bytes_read=39122 bytes_retransmit=0 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.6  sysload=0.97 cputime=5.513 memavail=1619600 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 6708.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=21097 bytes_read=39421 bytes_retransmit=0 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996538 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=27.7  sysload=1.05 cputime=5.556 memavail=1619596 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 6709.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=21235 bytes_read=39760 bytes_retransmit=0 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=27.6  sysload=1.05 cputime=5.600 memavail=1619904 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 6710.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=21349 bytes_read=40074 bytes_retransmit=0 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=27.9  sysload=1.05 cputime=5.643 memavail=1619920 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 6711.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=21463 bytes_read=40388 bytes_retransmit=0 bytes_invalid=0 send_seq=1237 receive_seq=1237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.6  sysload=1.05 cputime=5.686 memavail=1619672 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 6712.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=21553 bytes_read=40707 bytes_retransmit=0 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.4  sysload=1.05 cputime=5.728 memavail=1619404 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 6713.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=21643 bytes_read=41011 bytes_retransmit=0 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=0 temp=28.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.1  sysload=0.97 cputime=5.772 memavail=1619392 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 6714.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=21733 bytes_read=41300 bytes_retransmit=0 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.3  sysload=0.97 cputime=5.816 memavail=1619440 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 6715.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=21823 bytes_read=41619 bytes_retransmit=0 bytes_invalid=0 send_seq=1265 receive_seq=1265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=0 temp=28.6 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.6  sysload=0.97 cputime=5.860 memavail=1619448 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 6716.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=21913 bytes_read=41938 bytes_retransmit=0 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=0 temp=28.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=28.5  sysload=0.97 cputime=5.903 memavail=1619212 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 6717.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22003 bytes_read=42227 bytes_retransmit=0 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=28.2  sysload=0.97 cputime=5.948 memavail=1619492 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 6718.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22093 bytes_read=42546 bytes_retransmit=0 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.4  sysload=0.89 cputime=5.993 memavail=1619540 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 6719.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22183 bytes_read=42850 bytes_retransmit=0 bytes_invalid=0 send_seq=1293 receive_seq=1293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=0 temp=28.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.5  sysload=0.89 cputime=6.036 memavail=1619756 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 6720.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22273 bytes_read=43139 bytes_retransmit=0 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=27.9  sysload=0.89 cputime=6.079 memavail=1619892 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 6721.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22363 bytes_read=43472 bytes_retransmit=0 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.7  sysload=0.89 cputime=6.119 memavail=1619892 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 6722.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22453 bytes_read=43776 bytes_retransmit=0 bytes_invalid=0 send_seq=1314 receive_seq=1314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.6  sysload=0.89 cputime=6.162 memavail=1619892 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 6723.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22543 bytes_read=44065 bytes_retransmit=0 bytes_invalid=0 send_seq=1321 receive_seq=1321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.2  sysload=0.82 cputime=6.204 memavail=1619912 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 6724.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22633 bytes_read=44384 bytes_retransmit=0 bytes_invalid=0 send_seq=1328 receive_seq=1328 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996542 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.5  sysload=0.82 cputime=6.249 memavail=1619672 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 6725.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22723 bytes_read=44688 bytes_retransmit=0 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.0  sysload=0.82 cputime=6.290 memavail=1619644 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 6726.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22813 bytes_read=44991 bytes_retransmit=0 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.2  sysload=0.82 cputime=6.334 memavail=1619332 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 6727.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22903 bytes_read=45310 bytes_retransmit=0 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=0 temp=28.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.5  sysload=0.82 cputime=6.376 memavail=1619636 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 6728.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=22993 bytes_read=45614 bytes_retransmit=0 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996538 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.6  sysload=0.75 cputime=6.418 memavail=1619568 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.4 pwm=0.000
Stats 6729.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=23107 bytes_read=45913 bytes_retransmit=0 bytes_invalid=0 send_seq=1365 receive_seq=1365 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=28.3  sysload=0.75 cputime=6.459 memavail=1619168 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 6730.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=23221 bytes_read=46242 bytes_retransmit=0 bytes_invalid=0 send_seq=1374 receive_seq=1374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=28.5  sysload=0.75 cputime=6.520 memavail=1619448 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 6731.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=23335 bytes_read=46562 bytes_retransmit=0 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996534 heater_bed: target=0 temp=28.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=28.7  sysload=0.75 cputime=6.563 memavail=1619456 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 6732.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=23449 bytes_read=46851 bytes_retransmit=0 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=28.4  sysload=0.75 cputime=6.608 memavail=1619536 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 6733.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=23582 bytes_read=47173 bytes_retransmit=0 bytes_invalid=0 send_seq=1402 receive_seq=1402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=28.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=29.1  sysload=0.69 cputime=6.638 memavail=1619784 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 6734.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=23691 bytes_read=47472 bytes_retransmit=0 bytes_invalid=0 send_seq=1410 receive_seq=1410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.4  sysload=0.69 cputime=6.679 memavail=1619780 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 6735.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=23781 bytes_read=47760 bytes_retransmit=0 bytes_invalid=0 send_seq=1417 receive_seq=1417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.3  sysload=0.69 cputime=6.720 memavail=1619848 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 6736.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=23871 bytes_read=48094 bytes_retransmit=0 bytes_invalid=0 send_seq=1424 receive_seq=1424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=0 temp=28.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.1  sysload=0.69 cputime=6.763 memavail=1619852 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 6737.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=23961 bytes_read=48398 bytes_retransmit=0 bytes_invalid=0 send_seq=1431 receive_seq=1431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.4  sysload=0.69 cputime=6.806 memavail=1619848 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 6738.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=24051 bytes_read=48687 bytes_retransmit=0 bytes_invalid=0 send_seq=1438 receive_seq=1438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.7  sysload=0.64 cputime=6.846 memavail=1620104 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 6739.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=24141 bytes_read=49021 bytes_retransmit=0 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.6  sysload=0.64 cputime=6.889 memavail=1619840 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 6740.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=24231 bytes_read=49310 bytes_retransmit=0 bytes_invalid=0 send_seq=1452 receive_seq=1452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=28.5 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=29.1  sysload=0.64 cputime=6.929 memavail=1619856 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 6741.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24327 bytes_read=49629 bytes_retransmit=0 bytes_invalid=0 send_seq=1460 receive_seq=1460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=27.9 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=30.0  sysload=0.64 cputime=6.972 memavail=1619904 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 6742.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24417 bytes_read=49963 bytes_retransmit=0 bytes_invalid=0 send_seq=1467 receive_seq=1467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.2  sysload=0.64 cputime=7.016 memavail=1620576 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 6743.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24507 bytes_read=50252 bytes_retransmit=0 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.9  sysload=0.59 cputime=7.055 memavail=1620644 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 6744.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24597 bytes_read=50541 bytes_retransmit=0 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=27.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.6  sysload=0.59 cputime=7.096 memavail=1621136 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 6745.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24687 bytes_read=50875 bytes_retransmit=0 bytes_invalid=0 send_seq=1488 receive_seq=1488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.2  sysload=0.59 cputime=7.138 memavail=1620808 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 6746.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24777 bytes_read=51178 bytes_retransmit=0 bytes_invalid=0 send_seq=1495 receive_seq=1495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=27.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.6  sysload=0.59 cputime=7.181 memavail=1620864 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 6747.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24867 bytes_read=51467 bytes_retransmit=0 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=28.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.4  sysload=0.59 cputime=7.224 memavail=1621072 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 6748.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=24957 bytes_read=51801 bytes_retransmit=0 bytes_invalid=0 send_seq=1509 receive_seq=1509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=0 temp=27.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=30.0  sysload=0.54 cputime=7.268 memavail=1620688 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 6749.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=25047 bytes_read=52090 bytes_retransmit=0 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=27.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=29.1  sysload=0.54 cputime=7.308 memavail=1620408 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 6750.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=25137 bytes_read=52379 bytes_retransmit=0 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=27.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.0  sysload=0.54 cputime=7.347 memavail=1619828 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 6751.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=25227 bytes_read=52727 bytes_retransmit=0 bytes_invalid=0 send_seq=1530 receive_seq=1530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=29.5  sysload=0.54 cputime=7.388 memavail=1619848 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 6752.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=25317 bytes_read=53016 bytes_retransmit=0 bytes_invalid=0 send_seq=1537 receive_seq=1537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=30.0  sysload=0.54 cputime=7.430 memavail=1620216 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 6753.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=25407 bytes_read=53305 bytes_retransmit=0 bytes_invalid=0 send_seq=1544 receive_seq=1544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=0 temp=28.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=29.8  sysload=0.50 cputime=7.468 memavail=1620284 print_time=6702.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 7295.2: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=78679 bytes_read=220821 bytes_retransmit=0 bytes_invalid=0 send_seq=5678 receive_seq=5678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=24.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.0  sysload=0.04 cputime=30.370 memavail=1625652 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.9 pwm=0.000
Stats 7296.2: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=78685 bytes_read=221002 bytes_retransmit=0 bytes_invalid=0 send_seq=5679 receive_seq=5679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=24.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=35.2  sysload=0.04 cputime=30.403 memavail=1625672 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7297.2: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=78691 bytes_read=221168 bytes_retransmit=0 bytes_invalid=0 send_seq=5680 receive_seq=5680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=25.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.3  sysload=0.04 cputime=30.435 memavail=1625656 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7298.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=78697 bytes_read=221333 bytes_retransmit=0 bytes_invalid=0 send_seq=5681 receive_seq=5681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=24.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.7  sysload=0.04 cputime=30.466 memavail=1625884 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7299.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=78703 bytes_read=221514 bytes_retransmit=0 bytes_invalid=0 send_seq=5682 receive_seq=5682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=25.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.9  sysload=0.04 cputime=30.498 memavail=1625896 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7300.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=78720 bytes_read=221685 bytes_retransmit=0 bytes_invalid=0 send_seq=5684 receive_seq=5684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=24.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.3  sysload=0.03 cputime=30.532 memavail=1625656 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.4 pwm=0.000
Stats 7301.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=78763 bytes_read=221851 bytes_retransmit=0 bytes_invalid=0 send_seq=5688 receive_seq=5688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=25.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.3  sysload=0.03 cputime=30.564 memavail=1625648 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7302.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=78769 bytes_read=222032 bytes_retransmit=0 bytes_invalid=0 send_seq=5689 receive_seq=5689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=24.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.1  sysload=0.03 cputime=30.597 memavail=1625968 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.4 pwm=0.000
Stats 7303.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78775 bytes_read=222212 bytes_retransmit=0 bytes_invalid=0 send_seq=5690 receive_seq=5690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=25.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.5  sysload=0.03 cputime=30.630 memavail=1625720 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7304.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78781 bytes_read=222363 bytes_retransmit=0 bytes_invalid=0 send_seq=5691 receive_seq=5691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=25.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.2  sysload=0.03 cputime=30.662 memavail=1626288 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7305.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78787 bytes_read=222544 bytes_retransmit=0 bytes_invalid=0 send_seq=5692 receive_seq=5692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=25.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.0  sysload=0.03 cputime=30.695 memavail=1626540 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7306.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78793 bytes_read=222710 bytes_retransmit=0 bytes_invalid=0 send_seq=5693 receive_seq=5693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=24.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.7  sysload=0.03 cputime=30.726 memavail=1626592 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7307.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78799 bytes_read=222861 bytes_retransmit=0 bytes_invalid=0 send_seq=5694 receive_seq=5694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=25.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.4  sysload=0.03 cputime=30.758 memavail=1626848 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7308.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78816 bytes_read=223061 bytes_retransmit=0 bytes_invalid=0 send_seq=5696 receive_seq=5696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=23.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.9  sysload=0.03 cputime=30.791 memavail=1626848 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7309.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78859 bytes_read=223242 bytes_retransmit=0 bytes_invalid=0 send_seq=5700 receive_seq=5700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.9  sysload=0.03 cputime=30.824 memavail=1626908 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7310.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78865 bytes_read=223393 bytes_retransmit=0 bytes_invalid=0 send_seq=5701 receive_seq=5701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=0 temp=25.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.9  sysload=0.03 cputime=30.856 memavail=1626908 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7311.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78871 bytes_read=223574 bytes_retransmit=0 bytes_invalid=0 send_seq=5702 receive_seq=5702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=0 temp=23.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.0  sysload=0.03 cputime=30.888 memavail=1626404 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7312.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=78877 bytes_read=223740 bytes_retransmit=0 bytes_invalid=0 send_seq=5703 receive_seq=5703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=25.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.0  sysload=0.03 cputime=30.920 memavail=1626656 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7313.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78883 bytes_read=223905 bytes_retransmit=0 bytes_invalid=0 send_seq=5704 receive_seq=5704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=24.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.1  sysload=0.03 cputime=30.952 memavail=1626848 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7314.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78889 bytes_read=224086 bytes_retransmit=0 bytes_invalid=0 send_seq=5705 receive_seq=5705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=25.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=35.1  sysload=0.03 cputime=30.975 memavail=1626596 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7315.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78895 bytes_read=224252 bytes_retransmit=0 bytes_invalid=0 send_seq=5706 receive_seq=5706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=24.4 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=34.7  sysload=0.02 cputime=31.007 memavail=1626848 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7316.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78901 bytes_read=224403 bytes_retransmit=0 bytes_invalid=0 send_seq=5707 receive_seq=5707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=24.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.2  sysload=0.02 cputime=31.039 memavail=1626908 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7317.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78926 bytes_read=224589 bytes_retransmit=0 bytes_invalid=0 send_seq=5709 receive_seq=5709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=24.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=34.8  sysload=0.02 cputime=31.072 memavail=1626908 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7318.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78951 bytes_read=224774 bytes_retransmit=0 bytes_invalid=0 send_seq=5711 receive_seq=5711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=24.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=35.1  sysload=0.02 cputime=31.104 memavail=1626908 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.1 pwm=0.000
Stats 7319.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78957 bytes_read=224925 bytes_retransmit=0 bytes_invalid=0 send_seq=5712 receive_seq=5712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=24.4 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=35.4  sysload=0.02 cputime=31.136 memavail=1626908 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7320.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78974 bytes_read=225111 bytes_retransmit=0 bytes_invalid=0 send_seq=5714 receive_seq=5714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=23.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.7  sysload=0.02 cputime=31.168 memavail=1626656 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7321.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78993 bytes_read=225282 bytes_retransmit=0 bytes_invalid=0 send_seq=5716 receive_seq=5716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.0  sysload=0.02 cputime=31.200 memavail=1626436 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7322.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=78999 bytes_read=225433 bytes_retransmit=0 bytes_invalid=0 send_seq=5717 receive_seq=5717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=24.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.8  sysload=0.02 cputime=31.232 memavail=1626452 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7323.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79005 bytes_read=225628 bytes_retransmit=0 bytes_invalid=0 send_seq=5718 receive_seq=5718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=24.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.6  sysload=0.02 cputime=31.265 memavail=1626732 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7324.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79035 bytes_read=225804 bytes_retransmit=0 bytes_invalid=0 send_seq=5721 receive_seq=5721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=25.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.9  sysload=0.02 cputime=31.287 memavail=1626212 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7325.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79041 bytes_read=225955 bytes_retransmit=0 bytes_invalid=0 send_seq=5722 receive_seq=5722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.8  sysload=0.10 cputime=31.319 memavail=1626228 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7326.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79090 bytes_read=226151 bytes_retransmit=0 bytes_invalid=0 send_seq=5726 receive_seq=5726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=23.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=35.2  sysload=0.10 cputime=31.353 memavail=1626228 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7327.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79096 bytes_read=226317 bytes_retransmit=0 bytes_invalid=0 send_seq=5727 receive_seq=5727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.2  sysload=0.10 cputime=31.385 memavail=1626480 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7328.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79102 bytes_read=226475 bytes_retransmit=0 bytes_invalid=0 send_seq=5728 receive_seq=5728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=24.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.1  sysload=0.10 cputime=31.416 memavail=1626724 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7329.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79108 bytes_read=226644 bytes_retransmit=0 bytes_invalid=0 send_seq=5729 receive_seq=5729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=24.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.9  sysload=0.10 cputime=31.449 memavail=1626984 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7330.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79149 bytes_read=226814 bytes_retransmit=0 bytes_invalid=0 send_seq=5733 receive_seq=5733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=25.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.3  sysload=0.17 cputime=31.483 memavail=1626732 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7331.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79192 bytes_read=226970 bytes_retransmit=0 bytes_invalid=0 send_seq=5737 receive_seq=5737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=24.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.4  sysload=0.17 cputime=31.517 memavail=1626984 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.1 pwm=0.000
Stats 7332.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79198 bytes_read=227166 bytes_retransmit=0 bytes_invalid=0 send_seq=5738 receive_seq=5738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=35.0  sysload=0.17 cputime=31.552 memavail=1626732 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7333.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79204 bytes_read=227331 bytes_retransmit=0 bytes_invalid=0 send_seq=5739 receive_seq=5739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=23.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.2  sysload=0.17 cputime=31.573 memavail=1626732 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7334.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79221 bytes_read=227502 bytes_retransmit=0 bytes_invalid=0 send_seq=5741 receive_seq=5741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=26.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.5  sysload=0.17 cputime=31.596 memavail=1626724 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7335.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79240 bytes_read=227688 bytes_retransmit=0 bytes_invalid=0 send_seq=5743 receive_seq=5743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=25.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.5  sysload=0.16 cputime=31.629 memavail=1626772 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7336.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79265 bytes_read=227844 bytes_retransmit=0 bytes_invalid=0 send_seq=5745 receive_seq=5745 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=0 temp=24.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.3  sysload=0.16 cputime=31.663 memavail=1626752 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7337.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=79295 bytes_read=228020 bytes_retransmit=0 bytes_invalid=0 send_seq=5748 receive_seq=5748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=0 temp=24.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.3  sysload=0.16 cputime=31.696 memavail=1626248 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7338.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79301 bytes_read=228215 bytes_retransmit=0 bytes_invalid=0 send_seq=5749 receive_seq=5749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.4  sysload=0.16 cputime=31.729 memavail=1626244 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7339.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79345 bytes_read=228376 bytes_retransmit=0 bytes_invalid=0 send_seq=5752 receive_seq=5752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=25.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.5  sysload=0.16 cputime=31.763 memavail=1626276 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7340.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79370 bytes_read=228547 bytes_retransmit=0 bytes_invalid=0 send_seq=5754 receive_seq=5754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=24.2 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=34.6  sysload=0.15 cputime=31.796 memavail=1625756 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7341.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79395 bytes_read=228733 bytes_retransmit=0 bytes_invalid=0 send_seq=5756 receive_seq=5756 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=25.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.4  sysload=0.15 cputime=31.831 memavail=1626000 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.1 pwm=0.000
Stats 7342.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=79401 bytes_read=228884 bytes_retransmit=0 bytes_invalid=0 send_seq=5757 receive_seq=5757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=25.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.3  sysload=0.15 cputime=31.864 memavail=1625732 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7343.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=79418 bytes_read=229085 bytes_retransmit=0 bytes_invalid=0 send_seq=5759 receive_seq=5759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=24.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.3  sysload=0.15 cputime=31.900 memavail=1625764 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7344.2: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=79437 bytes_read=229256 bytes_retransmit=0 bytes_invalid=0 send_seq=5761 receive_seq=5761 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=23.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.4  sysload=0.15 cputime=31.932 memavail=1625732 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.4 pwm=0.000
Stats 7345.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=79443 bytes_read=229407 bytes_retransmit=0 bytes_invalid=0 send_seq=5762 receive_seq=5762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=25.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.2  sysload=0.13 cputime=31.955 memavail=1626008 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7346.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=79455 bytes_read=229604 bytes_retransmit=0 bytes_invalid=0 send_seq=5764 receive_seq=5764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=24.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.3  sysload=0.13 cputime=31.993 memavail=1626252 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7347.3: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=79461 bytes_read=229770 bytes_retransmit=0 bytes_invalid=0 send_seq=5765 receive_seq=5765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=24.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.2  sysload=0.13 cputime=32.028 memavail=1626512 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7348.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=79467 bytes_read=229935 bytes_retransmit=0 bytes_invalid=0 send_seq=5766 receive_seq=5766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=25.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.4  sysload=0.13 cputime=32.061 memavail=1626512 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7349.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=79473 bytes_read=230116 bytes_retransmit=0 bytes_invalid=0 send_seq=5767 receive_seq=5767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=23.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.1  sysload=0.13 cputime=32.095 memavail=1626724 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.9 pwm=0.000
Stats 7350.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=79479 bytes_read=230282 bytes_retransmit=0 bytes_invalid=0 send_seq=5768 receive_seq=5768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=24.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.9  sysload=0.12 cputime=32.129 memavail=1626760 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.1 pwm=0.000
Stats 7351.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=79509 bytes_read=230443 bytes_retransmit=0 bytes_invalid=0 send_seq=5771 receive_seq=5771 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=24.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.3  sysload=0.12 cputime=32.165 memavail=1626508 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7352.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=79515 bytes_read=230624 bytes_retransmit=0 bytes_invalid=0 send_seq=5772 receive_seq=5772 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=24.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=34.7  sysload=0.12 cputime=32.202 memavail=1626508 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.6 pwm=0.000
Stats 7353.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=79545 bytes_read=230814 bytes_retransmit=0 bytes_invalid=0 send_seq=5775 receive_seq=5775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=26.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.1  sysload=0.12 cputime=32.239 memavail=1626524 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Stats 7354.3: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=79575 bytes_read=230975 bytes_retransmit=0 bytes_invalid=0 send_seq=5778 receive_seq=5778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=24.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.3  sysload=0.12 cputime=32.263 memavail=1626780 print_time=7303.719 buffer_time=0.000 print_stall=0 extruder: target=0 temp=17.0 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-217-g309b8e03'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 00:37:20 2021 (1640907440.1 20.7)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041524792: New connection
webhooks client 3041524792: Client info {'program': 'Moonraker', 'version': 'v0.7.1-253-g3e70e4b'}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 22.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2434 bytes_read=5323 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4625 freq=71996213 heater_bed: target=0 temp=0.0 pwm=0.000 rpi: temp=26.8 mcu_temp: temp=0.0  sysload=1.07 cputime=1.788 memavail=1675192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3041524792
webhooks: registering remote method 'reboot_machine' for connection id: 3041524792
webhooks: registering remote method 'pause_job_queue' for connection id: 3041524792
webhooks: registering remote method 'start_job_queue' for connection id: 3041524792
Stats 23.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7600 bytes_read=5874 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=0 temp=0.0 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=0.0  sysload=1.07 cputime=1.817 memavail=1673424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 24.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7662 bytes_read=6050 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996226 heater_bed: target=0 temp=18.3 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.5  sysload=1.07 cputime=1.834 memavail=1670960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.0 pwm=0.000
Stats 25.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7668 bytes_read=6216 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996599 heater_bed: target=0 temp=19.1 pwm=0.000 rpi: temp=27.3 mcu_temp: temp=19.1  sysload=1.06 cputime=1.847 memavail=1657292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 26.9: gcodein=0 mcu: mcu_awake=0.064 mcu_task_avg=0.000055 mcu_task_stddev=0.000143 bytes_write=7693 bytes_read=6419 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=0 temp=18.6 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.4  sysload=1.06 cputime=1.860 memavail=1653724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.0 pwm=0.000
Stats 27.9: gcodein=0 mcu: mcu_awake=0.064 mcu_task_avg=0.000055 mcu_task_stddev=0.000143 bytes_write=7723 bytes_read=6580 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=18.1 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.5  sysload=1.06 cputime=1.882 memavail=1652224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=15.7 pwm=0.000
Stats 28.9: gcodein=0 mcu: mcu_awake=0.064 mcu_task_avg=0.000055 mcu_task_stddev=0.000143 bytes_write=7729 bytes_read=6746 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=19.0 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=18.8  sysload=1.06 cputime=1.904 memavail=1652188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 29.9: gcodein=0 mcu: mcu_awake=0.064 mcu_task_avg=0.000055 mcu_task_stddev=0.000143 bytes_write=7783 bytes_read=6947 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=18.6 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.5  sysload=1.06 cputime=1.927 memavail=1651860 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.1 pwm=0.000
Stats 30.9: gcodein=0 mcu: mcu_awake=0.064 mcu_task_avg=0.000055 mcu_task_stddev=0.000143 bytes_write=7789 bytes_read=7098 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=18.2 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.3  sysload=0.98 cputime=1.947 memavail=1650788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.2 pwm=0.000
Stats 31.9: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7795 bytes_read=7279 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=19.2 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.3  sysload=0.98 cputime=1.959 memavail=1650920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 32.9: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7801 bytes_read=7460 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=18.5 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.5  sysload=0.98 cputime=1.981 memavail=1650408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.1 pwm=0.000
Stats 33.9: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7807 bytes_read=7611 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=17.0 pwm=0.000 rpi: temp=28.7 mcu_temp: temp=19.5  sysload=0.98 cputime=1.994 memavail=1650380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.1 pwm=0.000
Stats 34.9: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7813 bytes_read=7777 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996438 heater_bed: target=0 temp=17.8 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.4  sysload=0.98 cputime=2.015 memavail=1650724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 35.9: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7819 bytes_read=7958 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=17.9 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.4  sysload=0.90 cputime=2.039 memavail=1650752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.0 pwm=0.000
Stats 36.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7825 bytes_read=8123 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=17.9 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.3  sysload=0.90 cputime=2.059 memavail=1650432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=15.7 pwm=0.000
Stats 37.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7831 bytes_read=8289 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996497 heater_bed: target=0 temp=18.0 pwm=0.000 rpi: temp=27.3 mcu_temp: temp=19.4  sysload=0.90 cputime=2.080 memavail=1651388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.0 pwm=0.000
Stats 38.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7856 bytes_read=8475 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=0 temp=17.0 pwm=0.000 rpi: temp=28.7 mcu_temp: temp=19.6  sysload=0.90 cputime=2.100 memavail=1643544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=15.8 pwm=0.000
Stats 39.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7881 bytes_read=8631 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=0 temp=17.8 pwm=0.000 rpi: temp=28.7 mcu_temp: temp=19.5  sysload=0.90 cputime=2.113 memavail=1650664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=15.9 pwm=0.000
Stats 40.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=7887 bytes_read=8797 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=18.5 pwm=0.000 rpi: temp=29.2 mcu_temp: temp=19.4  sysload=0.83 cputime=2.132 memavail=1650584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.2 pwm=0.000
Stats 41.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=7893 bytes_read=8992 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=18.6 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=20.0  sysload=0.83 cputime=2.154 memavail=1650556 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=15.9 pwm=0.000
Stats 42.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=7923 bytes_read=9153 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=0 temp=17.4 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.8  sysload=0.83 cputime=2.175 memavail=1650580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.0 pwm=0.000
Stats 43.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=7953 bytes_read=9329 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=0 temp=17.4 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.8  sysload=0.83 cputime=2.197 memavail=1650564 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.1 pwm=0.000
Stats 44.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=7959 bytes_read=9510 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=0 temp=17.7 pwm=0.000 rpi: temp=28.7 mcu_temp: temp=19.4  sysload=0.83 cputime=2.219 memavail=1650928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 45.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=7965 bytes_read=9661 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=0 temp=18.3 pwm=0.000 rpi: temp=29.2 mcu_temp: temp=20.1  sysload=0.76 cputime=2.240 memavail=1650896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.0 pwm=0.000
Stats 46.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7971 bytes_read=9841 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=0 temp=18.9 pwm=0.000 rpi: temp=28.2 mcu_temp: temp=19.4  sysload=0.76 cputime=2.260 memavail=1651080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=15.8 pwm=0.000
Stats 47.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8025 bytes_read=10042 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=0 temp=18.0 pwm=0.000 rpi: temp=27.7 mcu_temp: temp=19.9  sysload=0.76 cputime=2.283 memavail=1651364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 48.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8031 bytes_read=10193 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=0 temp=18.9 pwm=0.000 rpi: temp=29.2 mcu_temp: temp=20.0  sysload=0.76 cputime=2.304 memavail=1651396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.3 pwm=0.000
Stats 49.9: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8037 bytes_read=10368 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=18.0 pwm=0.000 rpi: temp=29.2 mcu_temp: temp=19.6  sysload=0.76 cputime=2.325 memavail=1651712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=16.1 pwm=0.000
Starting SD card print (position 0)
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 220.000
Stats 60.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8249 bytes_read=12080 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=18.6 pwm=1.000 rpi: temp=29.7 mcu_temp: temp=19.8 sd_pos=860 sysload=0.64 cputime=2.493 memavail=1650964 print_time=68.793 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.1 pwm=1.000
Stats 61.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8664 bytes_read=12276 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=60 temp=19.0 pwm=1.000 rpi: temp=30.2 mcu_temp: temp=19.9 sd_pos=860 sysload=0.59 cputime=2.521 memavail=1650724 print_time=69.795 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.1 pwm=1.000
Stats 62.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8723 bytes_read=12487 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=60 temp=17.4 pwm=1.000 rpi: temp=30.2 mcu_temp: temp=19.4 sd_pos=860 sysload=0.59 cputime=2.546 memavail=1650396 print_time=70.797 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.3 pwm=1.000
Stats 63.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8759 bytes_read=12663 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=60 temp=19.0 pwm=1.000 rpi: temp=30.7 mcu_temp: temp=19.8 sd_pos=860 sysload=0.59 cputime=2.570 memavail=1650300 print_time=71.799 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.5 pwm=1.000
Stats 64.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8840 bytes_read=12855 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=60 temp=19.7 pwm=1.000 rpi: temp=30.7 mcu_temp: temp=19.9 sd_pos=860 sysload=0.59 cputime=2.586 memavail=1650524 print_time=72.799 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.4 pwm=1.000
Stats 65.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8865 bytes_read=13041 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=20.9 pwm=1.000 rpi: temp=29.2 mcu_temp: temp=19.5 sd_pos=860 sysload=0.59 cputime=2.609 memavail=1650368 print_time=73.801 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.5 pwm=1.000
Stats 66.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8922 bytes_read=13222 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=60 temp=20.0 pwm=1.000 rpi: temp=29.7 mcu_temp: temp=19.7 sd_pos=860 sysload=0.54 cputime=2.624 memavail=1650856 print_time=74.802 buffer_time=0.000 print_stall=0 extruder: target=220 temp=16.6 pwm=1.000
Stats 67.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=8952 bytes_read=13398 bytes_retransmit=9 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=21.2 pwm=1.000 rpi: temp=29.7 mcu_temp: temp=19.8 sd_pos=860 sysload=0.54 cputime=2.648 memavail=1650856 print_time=75.803 buffer_time=0.000 print_stall=0 extruder: target=220 temp=20.2 pwm=1.000
Stats 68.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=9028 bytes_read=13599 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996464 heater_bed: target=60 temp=21.5 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.1 sd_pos=860 sysload=0.54 cputime=2.673 memavail=1650880 print_time=76.805 buffer_time=0.000 print_stall=0 extruder: target=220 temp=21.2 pwm=1.000
Stats 69.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=9132 bytes_read=13795 bytes_retransmit=9 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=60 temp=21.4 pwm=1.000 rpi: temp=30.7 mcu_temp: temp=19.9 sd_pos=860 sysload=0.54 cputime=2.698 memavail=1650636 print_time=77.805 buffer_time=0.000 print_stall=0 extruder: target=220 temp=25.2 pwm=1.000
Stats 70.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=9200 bytes_read=13966 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=60 temp=21.7 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.2 sd_pos=860 sysload=0.54 cputime=2.723 memavail=1650936 print_time=78.806 buffer_time=0.000 print_stall=0 extruder: target=220 temp=26.1 pwm=1.000
Stats 71.0: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=9276 bytes_read=14167 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=21.9 pwm=1.000 rpi: temp=30.2 mcu_temp: temp=19.8 sd_pos=860 sysload=0.50 cputime=2.769 memavail=1650776 print_time=79.808 buffer_time=0.000 print_stall=0 extruder: target=220 temp=27.2 pwm=1.000
Stats 72.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=9325 bytes_read=14363 bytes_retransmit=9 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=22.7 pwm=1.000 rpi: temp=30.7 mcu_temp: temp=19.7 sd_pos=860 sysload=0.50 cputime=2.802 memavail=1650640 print_time=80.809 buffer_time=0.000 print_stall=0 extruder: target=220 temp=29.1 pwm=1.000
Stats 73.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=9420 bytes_read=14539 bytes_retransmit=9 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=24.1 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.0 sd_pos=860 sysload=0.50 cputime=2.823 memavail=1650816 print_time=81.809 buffer_time=0.000 print_stall=0 extruder: target=220 temp=31.3 pwm=1.000
Stats 74.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=9506 bytes_read=14740 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=25.5 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=19.9 sd_pos=860 sysload=0.50 cputime=2.857 memavail=1650556 print_time=82.811 buffer_time=0.000 print_stall=0 extruder: target=220 temp=33.6 pwm=1.000
Stats 75.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=9582 bytes_read=14926 bytes_retransmit=9 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=25.8 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.1 sd_pos=860 sysload=0.50 cputime=2.889 memavail=1650636 print_time=83.812 buffer_time=0.000 print_stall=0 extruder: target=220 temp=35.9 pwm=1.000
Stats 76.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=9650 bytes_read=15097 bytes_retransmit=9 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=26.0 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=19.9 sd_pos=860 sysload=0.46 cputime=2.923 memavail=1650492 print_time=84.813 buffer_time=0.000 print_stall=0 extruder: target=220 temp=38.9 pwm=1.000
Stats 77.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=9750 bytes_read=15323 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996478 heater_bed: target=60 temp=26.1 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.2 sd_pos=860 sysload=0.46 cputime=2.958 memavail=1650752 print_time=85.814 buffer_time=0.000 print_stall=0 extruder: target=220 temp=40.7 pwm=1.000
Stats 78.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=9803 bytes_read=15504 bytes_retransmit=9 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=26.1 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=19.7 sd_pos=860 sysload=0.46 cputime=2.988 memavail=1650552 print_time=86.815 buffer_time=0.000 print_stall=0 extruder: target=220 temp=43.5 pwm=1.000
Stats 79.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=9871 bytes_read=15675 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=26.1 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.0 sd_pos=860 sysload=0.46 cputime=3.023 memavail=1650556 print_time=87.818 buffer_time=0.000 print_stall=0 extruder: target=220 temp=46.0 pwm=1.000
Stats 80.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=9934 bytes_read=15871 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=26.4 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.3 sd_pos=860 sysload=0.46 cputime=3.044 memavail=1650568 print_time=88.819 buffer_time=0.000 print_stall=0 extruder: target=220 temp=48.8 pwm=1.000
Stats 81.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=10029 bytes_read=16062 bytes_retransmit=9 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=26.4 pwm=1.000 rpi: temp=32.1 mcu_temp: temp=20.4 sd_pos=860 sysload=0.42 cputime=3.080 memavail=1650320 print_time=89.820 buffer_time=0.000 print_stall=0 extruder: target=220 temp=52.0 pwm=1.000
Stats 82.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=10115 bytes_read=16248 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=60 temp=27.1 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.2 sd_pos=860 sysload=0.42 cputime=3.117 memavail=1650072 print_time=90.824 buffer_time=0.000 print_stall=0 extruder: target=220 temp=54.1 pwm=1.000
Stats 83.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=10178 bytes_read=16444 bytes_retransmit=9 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996478 heater_bed: target=60 temp=27.6 pwm=1.000 rpi: temp=32.1 mcu_temp: temp=19.9 sd_pos=860 sysload=0.42 cputime=3.151 memavail=1649812 print_time=91.824 buffer_time=0.000 print_stall=0 extruder: target=220 temp=56.7 pwm=1.000
Stats 84.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=10241 bytes_read=16625 bytes_retransmit=9 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=60 temp=27.8 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=20.2 sd_pos=860 sysload=0.42 cputime=3.185 memavail=1650056 print_time=92.825 buffer_time=0.000 print_stall=0 extruder: target=220 temp=60.0 pwm=1.000
Stats 85.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=10340 bytes_read=16801 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996478 heater_bed: target=60 temp=28.0 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.1 sd_pos=860 sysload=0.42 cputime=3.219 memavail=1650140 print_time=93.826 buffer_time=0.000 print_stall=0 extruder: target=220 temp=62.5 pwm=1.000
Stats 86.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=10403 bytes_read=16997 bytes_retransmit=9 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=28.3 pwm=1.000 rpi: temp=31.2 mcu_temp: temp=20.0 sd_pos=860 sysload=0.39 cputime=3.254 memavail=1649868 print_time=94.828 buffer_time=0.000 print_stall=0 extruder: target=220 temp=64.8 pwm=1.000
Stats 87.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=10447 bytes_read=17188 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=28.8 pwm=1.000 rpi: temp=32.1 mcu_temp: temp=20.4 sd_pos=860 sysload=0.39 cputime=3.288 memavail=1650116 print_time=95.830 buffer_time=0.000 print_stall=0 extruder: target=220 temp=68.0 pwm=1.000
Stats 88.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=10523 bytes_read=17359 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996478 heater_bed: target=60 temp=29.0 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.3 sd_pos=860 sysload=0.39 cputime=3.323 memavail=1650132 print_time=96.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=70.2 pwm=1.000
Stats 89.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=10581 bytes_read=17560 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996477 heater_bed: target=60 temp=29.2 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.4 sd_pos=860 sysload=0.39 cputime=3.360 memavail=1650128 print_time=97.832 buffer_time=0.000 print_stall=0 extruder: target=220 temp=72.9 pwm=1.000
Stats 90.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=10676 bytes_read=17751 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=29.5 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.7 sd_pos=860 sysload=0.39 cputime=3.396 memavail=1650140 print_time=98.834 buffer_time=0.000 print_stall=0 extruder: target=220 temp=75.5 pwm=1.000
Stats 91.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=10757 bytes_read=17917 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=60 temp=29.6 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.5 sd_pos=860 sysload=0.36 cputime=3.431 memavail=1650372 print_time=99.834 buffer_time=0.000 print_stall=0 extruder: target=220 temp=78.5 pwm=1.000
Stats 92.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10820 bytes_read=18128 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=30.5 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=20.3 sd_pos=860 sysload=0.36 cputime=3.452 memavail=1650440 print_time=100.835 buffer_time=0.000 print_stall=0 extruder: target=220 temp=80.8 pwm=1.000
Stats 93.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10892 bytes_read=18314 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996478 heater_bed: target=60 temp=31.2 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.8 sd_pos=860 sysload=0.36 cputime=3.486 memavail=1650676 print_time=101.835 buffer_time=0.000 print_stall=0 extruder: target=220 temp=84.2 pwm=1.000
Stats 94.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=11000 bytes_read=18495 bytes_retransmit=9 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996481 heater_bed: target=60 temp=31.8 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.6 sd_pos=860 sysload=0.36 cputime=3.521 memavail=1650664 print_time=102.837 buffer_time=0.000 print_stall=0 extruder: target=220 temp=86.6 pwm=1.000
Stats 95.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=11071 bytes_read=18691 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=32.5 pwm=1.000 rpi: temp=32.1 mcu_temp: temp=20.5 sd_pos=860 sysload=0.36 cputime=3.556 memavail=1650656 print_time=103.838 buffer_time=0.000 print_stall=0 extruder: target=220 temp=88.7 pwm=1.000
Stats 96.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=11115 bytes_read=18867 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=32.7 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=20.8 sd_pos=860 sysload=0.33 cputime=3.591 memavail=1651044 print_time=104.838 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.8 pwm=1.000
Stats 97.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11201 bytes_read=19053 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=32.7 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=20.5 sd_pos=860 sysload=0.33 cputime=3.627 memavail=1651060 print_time=105.840 buffer_time=0.000 print_stall=0 extruder: target=220 temp=94.1 pwm=1.000
Stats 98.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11272 bytes_read=19249 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=33.0 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=20.5 sd_pos=860 sysload=0.33 cputime=3.650 memavail=1651036 print_time=106.841 buffer_time=0.000 print_stall=0 extruder: target=220 temp=96.3 pwm=1.000
Stats 99.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11335 bytes_read=19430 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=33.4 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=20.5 sd_pos=860 sysload=0.33 cputime=3.685 memavail=1651072 print_time=107.843 buffer_time=0.000 print_stall=0 extruder: target=220 temp=99.5 pwm=1.000
Stats 100.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11398 bytes_read=19596 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=33.8 pwm=1.000 rpi: temp=32.1 mcu_temp: temp=20.4 sd_pos=860 sysload=0.33 cputime=3.707 memavail=1651028 print_time=108.843 buffer_time=0.000 print_stall=0 extruder: target=220 temp=101.7 pwm=1.000
Stats 101.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11473 bytes_read=19792 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=34.2 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=20.8 sd_pos=860 sysload=0.30 cputime=3.739 memavail=1650548 print_time=109.845 buffer_time=0.000 print_stall=0 extruder: target=220 temp=104.0 pwm=1.000
Stats 102.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=11568 bytes_read=19998 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=34.5 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=20.5 sd_pos=860 sysload=0.30 cputime=3.761 memavail=1651284 print_time=110.846 buffer_time=0.000 print_stall=0 extruder: target=220 temp=106.9 pwm=1.000
Stats 103.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=11636 bytes_read=20169 bytes_retransmit=9 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=34.8 pwm=1.000 rpi: temp=31.6 mcu_temp: temp=20.6 sd_pos=860 sysload=0.30 cputime=3.793 memavail=1651064 print_time=111.847 buffer_time=0.000 print_stall=0 extruder: target=220 temp=110.2 pwm=1.000
Stats 104.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=11712 bytes_read=20370 bytes_retransmit=9 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=34.9 pwm=1.000 rpi: temp=33.1 mcu_temp: temp=20.6 sd_pos=860 sysload=0.30 cputime=3.827 memavail=1651052 print_time=112.849 buffer_time=0.000 print_stall=0 extruder: target=220 temp=111.3 pwm=1.000
Stats 105.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=11760 bytes_read=20546 bytes_retransmit=9 bytes_invalid=0 send_seq=609 receive_seq=609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=35.1 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=20.8 sd_pos=860 sysload=0.30 cputime=3.861 memavail=1651284 print_time=113.851 buffer_time=0.000 print_stall=0 extruder: target=220 temp=114.2 pwm=1.000
Stats 106.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=11855 bytes_read=20722 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=35.3 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=20.7 sd_pos=860 sysload=0.28 cputime=3.885 memavail=1651096 print_time=114.851 buffer_time=0.000 print_stall=0 extruder: target=220 temp=116.4 pwm=1.000
Stats 107.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11931 bytes_read=20938 bytes_retransmit=9 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=36.4 pwm=1.000 rpi: temp=33.1 mcu_temp: temp=20.9 sd_pos=860 sysload=0.28 cputime=3.920 memavail=1650896 print_time=115.854 buffer_time=0.000 print_stall=0 extruder: target=220 temp=118.6 pwm=1.000
Stats 108.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=11975 bytes_read=21114 bytes_retransmit=9 bytes_invalid=0 send_seq=623 receive_seq=623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=36.9 pwm=1.000 rpi: temp=33.1 mcu_temp: temp=20.8 sd_pos=860 sysload=0.28 cputime=3.955 memavail=1650804 print_time=116.855 buffer_time=0.000 print_stall=0 extruder: target=220 temp=121.4 pwm=1.000
Stats 109.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=12055 bytes_read=21285 bytes_retransmit=9 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=38.0 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.3 sd_pos=860 sysload=0.28 cputime=3.991 memavail=1650864 print_time=117.857 buffer_time=0.000 print_stall=0 extruder: target=220 temp=123.5 pwm=1.000
Stats 110.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=12153 bytes_read=21480 bytes_retransmit=9 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=38.0 pwm=1.000 rpi: temp=34.1 mcu_temp: temp=21.0 sd_pos=860 sysload=0.28 cputime=4.025 memavail=1650500 print_time=118.857 buffer_time=0.000 print_stall=0 extruder: target=220 temp=125.6 pwm=1.000
Stats 111.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=12208 bytes_read=21645 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=38.1 pwm=1.000 rpi: temp=32.6 mcu_temp: temp=21.3 sd_pos=860 sysload=0.25 cputime=4.059 memavail=1649992 print_time=119.858 buffer_time=0.000 print_stall=0 extruder: target=220 temp=128.3 pwm=1.000
Stats 112.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=12276 bytes_read=21818 bytes_retransmit=9 bytes_invalid=0 send_seq=642 receive_seq=642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=38.1 pwm=1.000 rpi: temp=33.1 mcu_temp: temp=21.1 sd_pos=860 sysload=0.25 cputime=4.081 memavail=1650432 print_time=120.858 buffer_time=0.000 print_stall=0 extruder: target=220 temp=130.4 pwm=1.000
Stats 113.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=12348 bytes_read=22006 bytes_retransmit=9 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=38.2 pwm=1.000 rpi: temp=34.1 mcu_temp: temp=21.4 sd_pos=860 sysload=0.25 cputime=4.117 memavail=1650748 print_time=121.860 buffer_time=0.000 print_stall=0 extruder: target=220 temp=132.4 pwm=1.000
Stats 114.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=12392 bytes_read=22178 bytes_retransmit=9 bytes_invalid=0 send_seq=650 receive_seq=650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=38.6 pwm=1.000 rpi: temp=33.1 mcu_temp: temp=21.0 sd_pos=860 sysload=0.25 cputime=4.150 memavail=1650732 print_time=122.861 buffer_time=0.000 print_stall=0 extruder: target=220 temp=135.1 pwm=1.000
Stats 115.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=12495 bytes_read=22351 bytes_retransmit=9 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=39.3 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=20.9 sd_pos=860 sysload=0.25 cputime=4.182 memavail=1650700 print_time=123.862 buffer_time=0.000 print_stall=0 extruder: target=220 temp=137.2 pwm=1.000
Stats 116.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=12563 bytes_read=22549 bytes_retransmit=9 bytes_invalid=0 send_seq=661 receive_seq=661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=39.4 pwm=1.000 rpi: temp=34.1 mcu_temp: temp=21.1 sd_pos=860 sysload=0.23 cputime=4.216 memavail=1650112 print_time=124.863 buffer_time=0.000 print_stall=0 extruder: target=220 temp=139.3 pwm=1.000
Stats 117.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=12631 bytes_read=22746 bytes_retransmit=9 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=39.7 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.5 sd_pos=860 sysload=0.23 cputime=4.251 memavail=1650448 print_time=125.865 buffer_time=0.000 print_stall=0 extruder: target=220 temp=141.9 pwm=1.000
Stats 118.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=12721 bytes_read=22914 bytes_retransmit=9 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=40.0 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.2 sd_pos=860 sysload=0.23 cputime=4.284 memavail=1650692 print_time=126.866 buffer_time=0.000 print_stall=0 extruder: target=220 temp=143.8 pwm=1.000
Stats 119.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=12807 bytes_read=23122 bytes_retransmit=9 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=40.1 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=20.8 sd_pos=860 sysload=0.23 cputime=4.318 memavail=1650700 print_time=127.868 buffer_time=0.000 print_stall=0 extruder: target=220 temp=145.8 pwm=1.000
Stats 120.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=12889 bytes_read=23304 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=40.6 pwm=1.000 rpi: temp=34.1 mcu_temp: temp=21.1 sd_pos=860 sysload=0.23 cputime=4.353 memavail=1650376 print_time=128.870 buffer_time=0.000 print_stall=0 extruder: target=220 temp=148.3 pwm=1.000
Stats 121.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=12947 bytes_read=23462 bytes_retransmit=9 bytes_invalid=0 send_seq=686 receive_seq=686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=40.7 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=21.6 sd_pos=860 sysload=0.22 cputime=4.385 memavail=1650404 print_time=129.871 buffer_time=0.000 print_stall=0 extruder: target=220 temp=150.3 pwm=1.000
Stats 122.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000036 bytes_write=13022 bytes_read=23670 bytes_retransmit=9 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=40.9 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=20.5 sd_pos=860 sysload=0.22 cputime=4.420 memavail=1650312 print_time=130.872 buffer_time=0.000 print_stall=0 extruder: target=220 temp=151.9 pwm=1.000
Stats 123.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000036 bytes_write=13112 bytes_read=23852 bytes_retransmit=9 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=41.8 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=21.2 sd_pos=860 sysload=0.22 cputime=4.455 memavail=1650340 print_time=131.873 buffer_time=0.000 print_stall=0 extruder: target=220 temp=154.6 pwm=1.000
Stats 124.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000036 bytes_write=13194 bytes_read=24020 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=42.1 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=21.4 sd_pos=860 sysload=0.22 cputime=4.489 memavail=1650072 print_time=132.874 buffer_time=0.000 print_stall=0 extruder: target=220 temp=156.5 pwm=1.000
Stats 125.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000036 bytes_write=13263 bytes_read=24229 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=42.1 pwm=1.000 rpi: temp=33.6 mcu_temp: temp=21.4 sd_pos=860 sysload=0.22 cputime=4.523 memavail=1649840 print_time=133.875 buffer_time=0.000 print_stall=0 extruder: target=220 temp=158.3 pwm=1.000
Stats 126.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000017 mcu_task_stddev=0.000036 bytes_write=13307 bytes_read=24401 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=42.5 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.1 sd_pos=860 sysload=0.20 cputime=4.558 memavail=1649856 print_time=134.875 buffer_time=0.000 print_stall=0 extruder: target=220 temp=160.8 pwm=1.000
Stats 127.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=13406 bytes_read=24589 bytes_retransmit=9 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=42.6 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=20.9 sd_pos=860 sysload=0.20 cputime=4.582 memavail=1649776 print_time=135.876 buffer_time=0.000 print_stall=0 extruder: target=220 temp=162.6 pwm=1.000
Stats 128.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=13450 bytes_read=24777 bytes_retransmit=9 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=42.6 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.3 sd_pos=860 sysload=0.20 cputime=4.616 memavail=1649640 print_time=136.879 buffer_time=0.000 print_stall=0 extruder: target=220 temp=164.5 pwm=1.000
Stats 129.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=13502 bytes_read=24949 bytes_retransmit=9 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=42.7 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=21.8 sd_pos=860 sysload=0.20 cputime=4.651 memavail=1649348 print_time=137.882 buffer_time=0.000 print_stall=0 extruder: target=220 temp=166.9 pwm=1.000
Stats 130.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=13570 bytes_read=25117 bytes_retransmit=9 bytes_invalid=0 send_seq=725 receive_seq=725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996504 heater_bed: target=60 temp=43.6 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.5 sd_pos=860 sysload=0.20 cputime=4.683 memavail=1649600 print_time=138.885 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.7 pwm=1.000
Stats 131.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=13654 bytes_read=25320 bytes_retransmit=9 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=60 temp=44.4 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.2 sd_pos=860 sysload=0.18 cputime=4.718 memavail=1649220 print_time=139.890 buffer_time=0.000 print_stall=0 extruder: target=220 temp=170.5 pwm=1.000
Stats 132.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=13718 bytes_read=25512 bytes_retransmit=9 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=60 temp=44.5 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.7 sd_pos=860 sysload=0.18 cputime=4.751 memavail=1649584 print_time=140.892 buffer_time=0.000 print_stall=0 extruder: target=220 temp=173.0 pwm=1.000
Stats 133.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=13786 bytes_read=25680 bytes_retransmit=9 bytes_invalid=0 send_seq=740 receive_seq=740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996510 heater_bed: target=60 temp=44.7 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.8 sd_pos=860 sysload=0.18 cputime=4.783 memavail=1649808 print_time=141.895 buffer_time=0.000 print_stall=0 extruder: target=220 temp=174.8 pwm=1.000
Stats 134.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=13848 bytes_read=25878 bytes_retransmit=9 bytes_invalid=0 send_seq=745 receive_seq=745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=60 temp=45.1 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.7 sd_pos=860 sysload=0.18 cputime=4.816 memavail=1649892 print_time=142.899 buffer_time=0.000 print_stall=0 extruder: target=220 temp=176.5 pwm=1.000
Stats 135.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=13892 bytes_read=26050 bytes_retransmit=9 bytes_invalid=0 send_seq=748 receive_seq=748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=60 temp=45.6 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.9 sd_pos=860 sysload=0.18 cputime=4.850 memavail=1649872 print_time=143.901 buffer_time=0.000 print_stall=0 extruder: target=220 temp=178.9 pwm=1.000
Stats 136.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=14037 bytes_read=26238 bytes_retransmit=9 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996510 heater_bed: target=60 temp=46.5 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.5 sd_pos=860 sysload=0.17 cputime=4.872 memavail=1650120 print_time=144.902 buffer_time=0.000 print_stall=0 extruder: target=220 temp=180.7 pwm=1.000
Stats 137.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000027 bytes_write=14095 bytes_read=26451 bytes_retransmit=9 bytes_invalid=0 send_seq=762 receive_seq=762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=60 temp=46.7 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=22.0 sd_pos=860 sysload=0.17 cputime=4.906 memavail=1649872 print_time=145.906 buffer_time=0.000 print_stall=0 extruder: target=220 temp=182.4 pwm=1.000
Stats 138.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000027 bytes_write=14147 bytes_read=26623 bytes_retransmit=9 bytes_invalid=0 send_seq=765 receive_seq=765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=60 temp=46.8 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.7 sd_pos=860 sysload=0.17 cputime=4.940 memavail=1649896 print_time=146.904 buffer_time=0.000 print_stall=0 extruder: target=220 temp=184.6 pwm=1.000
Stats 139.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000027 bytes_write=14215 bytes_read=26791 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=60 temp=46.9 pwm=1.000 rpi: temp=34.6 mcu_temp: temp=21.8 sd_pos=860 sysload=0.17 cputime=4.974 memavail=1650112 print_time=147.905 buffer_time=0.000 print_stall=0 extruder: target=220 temp=186.4 pwm=1.000
Stats 140.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000027 bytes_write=14315 bytes_read=26999 bytes_retransmit=9 bytes_invalid=0 send_seq=777 receive_seq=777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=60 temp=47.3 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=21.8 sd_pos=860 sysload=0.17 cputime=5.009 memavail=1650132 print_time=148.906 buffer_time=0.000 print_stall=0 extruder: target=220 temp=187.9 pwm=1.000
Stats 141.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000027 bytes_write=14383 bytes_read=27181 bytes_retransmit=9 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=47.6 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=21.6 sd_pos=860 sysload=0.15 cputime=5.044 memavail=1649612 print_time=149.907 buffer_time=0.000 print_stall=0 extruder: target=220 temp=190.1 pwm=1.000
Stats 142.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=14469 bytes_read=27364 bytes_retransmit=9 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=47.7 pwm=1.000 rpi: temp=36.0 mcu_temp: temp=21.9 sd_pos=860 sysload=0.15 cputime=5.078 memavail=1649936 print_time=150.908 buffer_time=0.000 print_stall=0 extruder: target=220 temp=191.8 pwm=1.000
Stats 143.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=14532 bytes_read=27557 bytes_retransmit=9 bytes_invalid=0 send_seq=791 receive_seq=791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=47.9 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=21.7 sd_pos=860 sysload=0.15 cputime=5.113 memavail=1650032 print_time=151.909 buffer_time=0.000 print_stall=0 extruder: target=220 temp=194.1 pwm=1.000
Stats 144.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=14592 bytes_read=27734 bytes_retransmit=9 bytes_invalid=0 send_seq=795 receive_seq=795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=48.3 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=22.4 sd_pos=860 sysload=0.15 cputime=5.148 memavail=1650496 print_time=152.911 buffer_time=0.000 print_stall=0 extruder: target=220 temp=195.7 pwm=1.000
Stats 145.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=14676 bytes_read=27907 bytes_retransmit=9 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=48.5 pwm=1.000 rpi: temp=36.0 mcu_temp: temp=21.9 sd_pos=860 sysload=0.15 cputime=5.183 memavail=1650580 print_time=153.913 buffer_time=0.000 print_stall=0 extruder: target=220 temp=197.3 pwm=1.000
Stats 146.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=14760 bytes_read=28124 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=48.6 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=22.0 sd_pos=860 sysload=0.14 cputime=5.219 memavail=1650312 print_time=154.915 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.5 pwm=0.851
Stats 147.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=14868 bytes_read=28317 bytes_retransmit=9 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=49.3 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=22.2 sd_pos=860 sysload=0.14 cputime=5.255 memavail=1650836 print_time=155.916 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.0 pwm=0.772
Stats 148.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=14940 bytes_read=28485 bytes_retransmit=9 bytes_invalid=0 send_seq=819 receive_seq=819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=49.2 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=22.3 sd_pos=860 sysload=0.14 cputime=5.290 memavail=1650820 print_time=156.918 buffer_time=0.000 print_stall=0 extruder: target=220 temp=202.6 pwm=0.772
Stats 149.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=15063 bytes_read=28712 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=50.2 pwm=0.186 rpi: temp=36.0 mcu_temp: temp=22.5 sd_pos=860 sysload=0.14 cputime=5.327 memavail=1651084 print_time=157.919 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.6 pwm=0.635
Stats 150.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=15214 bytes_read=28900 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=50.2 pwm=1.000 rpi: temp=35.0 mcu_temp: temp=22.4 sd_pos=860 sysload=0.14 cputime=5.364 memavail=1651080 print_time=158.921 buffer_time=0.000 print_stall=0 extruder: target=220 temp=206.0 pwm=0.629
Stats 151.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=15298 bytes_read=29073 bytes_retransmit=9 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=50.5 pwm=1.000 rpi: temp=36.0 mcu_temp: temp=22.4 sd_pos=860 sysload=0.13 cputime=5.398 memavail=1651092 print_time=159.922 buffer_time=0.000 print_stall=0 extruder: target=220 temp=207.4 pwm=0.576
Stats 152.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=15363 bytes_read=29300 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=50.7 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=22.1 sd_pos=860 sysload=0.13 cputime=5.434 memavail=1650584 print_time=160.923 buffer_time=0.000 print_stall=0 extruder: target=220 temp=209.3 pwm=0.418
Stats 153.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=15498 bytes_read=29483 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=51.1 pwm=0.935 rpi: temp=35.0 mcu_temp: temp=22.6 sd_pos=860 sysload=0.13 cputime=5.469 memavail=1650592 print_time=161.925 buffer_time=0.000 print_stall=0 extruder: target=220 temp=210.5 pwm=0.407
Stats 154.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=15605 bytes_read=29656 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=51.3 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=22.1 sd_pos=860 sysload=0.13 cputime=5.502 memavail=1650952 print_time=162.925 buffer_time=0.000 print_stall=0 extruder: target=220 temp=211.6 pwm=0.438
Stats 155.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=15665 bytes_read=29863 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=51.6 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=22.2 sd_pos=860 sysload=0.13 cputime=5.538 memavail=1651212 print_time=163.927 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.9 pwm=0.500
Stats 156.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=15763 bytes_read=30036 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=51.8 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=22.6 sd_pos=860 sysload=0.12 cputime=5.572 memavail=1651204 print_time=164.929 buffer_time=0.000 print_stall=0 extruder: target=220 temp=213.8 pwm=0.500
Stats 157.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=15860 bytes_read=30229 bytes_retransmit=9 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=51.9 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=22.3 sd_pos=860 sysload=0.12 cputime=5.607 memavail=1651432 print_time=165.930 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.8 pwm=0.377
Stats 158.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=15957 bytes_read=30451 bytes_retransmit=9 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=52.1 pwm=1.000 rpi: temp=35.5 mcu_temp: temp=22.6 sd_pos=860 sysload=0.12 cputime=5.646 memavail=1651456 print_time=166.932 buffer_time=0.000 print_stall=0 extruder: target=220 temp=215.9 pwm=0.348
Heater extruder within range of 220.000
Stats 159.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=16070 bytes_read=30634 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=52.5 pwm=1.000 rpi: temp=36.0 mcu_temp: temp=22.8 sd_pos=860 sysload=0.12 cputime=5.682 memavail=1651212 print_time=167.934 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.5 pwm=0.380
Stats 160.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=16143 bytes_read=30817 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996528 heater_bed: target=60 temp=53.0 pwm=0.698 rpi: temp=35.5 mcu_temp: temp=22.9 sd_pos=860 sysload=0.12 cputime=5.717 memavail=1651236 print_time=168.934 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.9 pwm=0.581
Stats 161.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=16251 bytes_read=31019 bytes_retransmit=9 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=53.4 pwm=0.618 rpi: temp=35.5 mcu_temp: temp=22.4 sd_pos=860 sysload=0.11 cputime=5.755 memavail=1650972 print_time=169.935 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.0 pwm=0.292
Stats 162.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=16412 bytes_read=31232 bytes_retransmit=9 bytes_invalid=0 send_seq=915 receive_seq=915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=53.8 pwm=0.264 rpi: temp=35.0 mcu_temp: temp=23.1 sd_pos=860 sysload=0.11 cputime=5.792 memavail=1650964 print_time=170.938 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.3 pwm=0.491
Stats 163.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=16665 bytes_read=31445 bytes_retransmit=9 bytes_invalid=0 send_seq=926 receive_seq=926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=53.8 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=22.8 sd_pos=860 sysload=0.11 cputime=5.830 memavail=1650736 print_time=171.942 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.6 pwm=0.534
Stats 164.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=16754 bytes_read=31642 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=53.9 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=23.1 sd_pos=860 sysload=0.11 cputime=5.864 memavail=1650728 print_time=172.943 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.3 pwm=0.436
Stats 165.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=16811 bytes_read=31805 bytes_retransmit=9 bytes_invalid=0 send_seq=935 receive_seq=935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=54.0 pwm=1.000 rpi: temp=37.5 mcu_temp: temp=22.9 sd_pos=860 sysload=0.11 cputime=5.898 memavail=1650864 print_time=173.944 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.426
Stats 166.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=16916 bytes_read=31998 bytes_retransmit=9 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=54.4 pwm=0.528 rpi: temp=36.0 mcu_temp: temp=23.0 sd_pos=860 sysload=0.10 cputime=5.934 memavail=1650848 print_time=174.944 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.422
Stats 167.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000047 bytes_write=17066 bytes_read=32225 bytes_retransmit=9 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=54.6 pwm=0.709 rpi: temp=36.5 mcu_temp: temp=22.8 sd_pos=860 sysload=0.10 cputime=5.970 memavail=1650344 print_time=175.947 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.538
Stats 168.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000047 bytes_write=17187 bytes_read=32408 bytes_retransmit=9 bytes_invalid=0 send_seq=958 receive_seq=958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=54.8 pwm=0.608 rpi: temp=35.5 mcu_temp: temp=22.8 sd_pos=860 sysload=0.10 cputime=6.005 memavail=1650856 print_time=176.948 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.411
Stats 169.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000047 bytes_write=17252 bytes_read=32582 bytes_retransmit=9 bytes_invalid=0 send_seq=962 receive_seq=962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=54.9 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=23.3 sd_pos=860 sysload=0.10 cputime=6.038 memavail=1650280 print_time=177.950 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.411
Stats 170.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000047 bytes_write=17341 bytes_read=32771 bytes_retransmit=9 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=60 temp=55.1 pwm=0.801 rpi: temp=36.5 mcu_temp: temp=22.8 sd_pos=860 sysload=0.10 cputime=6.097 memavail=1650296 print_time=178.953 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.426
Heater heater_bed within range of 60.000
Stats 171.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000047 bytes_write=17449 bytes_read=32939 bytes_retransmit=9 bytes_invalid=0 send_seq=975 receive_seq=975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=60 temp=55.2 pwm=1.000 rpi: temp=37.0 mcu_temp: temp=23.0 sd_pos=860 sysload=0.09 cputime=6.134 memavail=1650544 print_time=179.955 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.409
Stats 172.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17538 bytes_read=33131 bytes_retransmit=9 bytes_invalid=0 send_seq=981 receive_seq=981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=55.6 pwm=0.591 rpi: temp=37.0 mcu_temp: temp=22.6 sd_pos=860 sysload=0.09 cputime=6.156 memavail=1651232 print_time=180.955 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.291
Stats 173.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17643 bytes_read=33333 bytes_retransmit=9 bytes_invalid=0 send_seq=988 receive_seq=988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=55.8 pwm=0.327 rpi: temp=36.5 mcu_temp: temp=22.7 sd_pos=860 sysload=0.09 cputime=6.194 memavail=1651184 print_time=181.958 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.308
Stats 174.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17772 bytes_read=33516 bytes_retransmit=9 bytes_invalid=0 send_seq=996 receive_seq=996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=56.1 pwm=0.450 rpi: temp=36.5 mcu_temp: temp=23.2 sd_pos=860 sysload=0.09 cputime=6.230 memavail=1651116 print_time=182.959 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.339
Stats 175.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17861 bytes_read=33704 bytes_retransmit=9 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=56.2 pwm=0.938 rpi: temp=36.5 mcu_temp: temp=23.5 sd_pos=860 sysload=0.09 cputime=6.265 memavail=1650864 print_time=183.960 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.392
Stats 176.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17982 bytes_read=33916 bytes_retransmit=9 bytes_invalid=0 send_seq=1010 receive_seq=1010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=56.4 pwm=0.800 rpi: temp=37.0 mcu_temp: temp=23.4 sd_pos=860 sysload=0.08 cputime=6.303 memavail=1650864 print_time=184.962 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.345
Stats 177.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18110 bytes_read=34119 bytes_retransmit=9 bytes_invalid=0 send_seq=1019 receive_seq=1019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=56.5 pwm=0.838 rpi: temp=37.0 mcu_temp: temp=23.2 sd_pos=860 sysload=0.08 cputime=6.339 memavail=1650868 print_time=185.963 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.394
Stats 178.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18207 bytes_read=34312 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996527 heater_bed: target=60 temp=56.7 pwm=0.951 rpi: temp=37.0 mcu_temp: temp=22.7 sd_pos=860 sysload=0.08 cputime=6.376 memavail=1650876 print_time=186.964 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.394
Stats 179.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18333 bytes_read=34529 bytes_retransmit=9 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=56.7 pwm=1.000 rpi: temp=37.0 mcu_temp: temp=23.2 sd_pos=860 sysload=0.08 cputime=6.413 memavail=1650456 print_time=187.966 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.319
Stats 180.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18446 bytes_read=34712 bytes_retransmit=9 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=56.8 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=23.0 sd_pos=860 sysload=0.08 cputime=6.450 memavail=1650380 print_time=188.968 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.355
Stats 181.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18476 bytes_read=34885 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=56.9 pwm=1.000 rpi: temp=36.5 mcu_temp: temp=23.1 sd_pos=860 sysload=0.08 cputime=6.484 memavail=1650044 print_time=189.969 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.355
Stats 182.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=18581 bytes_read=35107 bytes_retransmit=9 bytes_invalid=0 send_seq=1053 receive_seq=1053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=57.1 pwm=0.621 rpi: temp=36.0 mcu_temp: temp=22.8 sd_pos=860 sysload=0.08 cputime=6.519 memavail=1650376 print_time=190.971 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.436
Stats 183.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=18702 bytes_read=35295 bytes_retransmit=9 bytes_invalid=0 send_seq=1062 receive_seq=1062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=57.5 pwm=0.165 rpi: temp=37.0 mcu_temp: temp=23.4 sd_pos=860 sysload=0.08 cputime=6.555 memavail=1650700 print_time=191.973 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.410
Stats 184.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=18787 bytes_read=35483 bytes_retransmit=9 bytes_invalid=0 send_seq=1068 receive_seq=1068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=57.9 pwm=0.000 rpi: temp=37.0 mcu_temp: temp=22.9 sd_pos=860 sysload=0.08 cputime=6.591 memavail=1650320 print_time=192.973 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.317
Stats 185.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=18874 bytes_read=35680 bytes_retransmit=9 bytes_invalid=0 send_seq=1073 receive_seq=1073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=58.1 pwm=0.010 rpi: temp=38.0 mcu_temp: temp=23.5 sd_pos=860 sysload=0.08 cputime=6.628 memavail=1650388 print_time=193.975 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.396
Stats 186.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=19110 bytes_read=35894 bytes_retransmit=9 bytes_invalid=0 send_seq=1085 receive_seq=1085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=58.1 pwm=0.803 rpi: temp=38.0 mcu_temp: temp=23.6 sd_pos=860 sysload=0.07 cputime=6.669 memavail=1650380 print_time=194.979 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.446
Stats 187.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000042 bytes_write=19217 bytes_read=36102 bytes_retransmit=9 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996528 heater_bed: target=60 temp=58.1 pwm=0.835 rpi: temp=37.0 mcu_temp: temp=23.5 sd_pos=860 sysload=0.07 cputime=6.707 memavail=1650716 print_time=195.980 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.426
Stats 188.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000042 bytes_write=19343 bytes_read=36319 bytes_retransmit=9 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996533 heater_bed: target=60 temp=58.1 pwm=1.000 rpi: temp=37.5 mcu_temp: temp=23.5 sd_pos=860 sysload=0.07 cputime=6.746 memavail=1650696 print_time=196.980 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.330
Stats 189.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000042 bytes_write=19453 bytes_read=36502 bytes_retransmit=9 bytes_invalid=0 send_seq=1109 receive_seq=1109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=60 temp=58.3 pwm=0.560 rpi: temp=38.5 mcu_temp: temp=23.5 sd_pos=860 sysload=0.07 cputime=6.769 memavail=1650456 print_time=197.981 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.436
Stats 190.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000042 bytes_write=19525 bytes_read=36685 bytes_retransmit=9 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996536 heater_bed: target=60 temp=58.3 pwm=1.000 rpi: temp=38.0 mcu_temp: temp=23.2 sd_pos=860 sysload=0.07 cputime=6.806 memavail=1650580 print_time=198.982 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.5 pwm=0.436
Stats 191.0: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000042 bytes_write=19646 bytes_read=36897 bytes_retransmit=9 bytes_invalid=0 send_seq=1122 receive_seq=1122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=60 temp=58.5 pwm=0.530 rpi: temp=37.5 mcu_temp: temp=23.3 sd_pos=860 sysload=0.06 cputime=6.843 memavail=1650080 print_time=199.984 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.481
Stats 192.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19770 bytes_read=37095 bytes_retransmit=9 bytes_invalid=0 send_seq=1130 receive_seq=1130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=60 temp=58.7 pwm=0.243 rpi: temp=37.5 mcu_temp: temp=23.3 sd_pos=860 sysload=0.06 cputime=6.878 memavail=1650132 print_time=200.985 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.403
Stats 193.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19872 bytes_read=37288 bytes_retransmit=9 bytes_invalid=0 send_seq=1137 receive_seq=1137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996536 heater_bed: target=60 temp=58.8 pwm=0.460 rpi: temp=38.0 mcu_temp: temp=23.2 sd_pos=860 sysload=0.06 cputime=6.914 memavail=1649892 print_time=201.987 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.424
Stats 194.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19950 bytes_read=37490 bytes_retransmit=9 bytes_invalid=0 send_seq=1143 receive_seq=1143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996537 heater_bed: target=60 temp=58.9 pwm=0.599 rpi: temp=37.5 mcu_temp: temp=23.9 sd_pos=860 sysload=0.06 cputime=6.951 memavail=1650044 print_time=202.988 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.406
Stats 195.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20075 bytes_read=37678 bytes_retransmit=9 bytes_invalid=0 send_seq=1152 receive_seq=1152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=60 temp=59.0 pwm=0.450 rpi: temp=38.0 mcu_temp: temp=23.0 sd_pos=860 sysload=0.06 cputime=6.989 memavail=1649844 print_time=203.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.398
Stats 196.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20166 bytes_read=37871 bytes_retransmit=9 bytes_invalid=0 send_seq=1159 receive_seq=1159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996535 heater_bed: target=60 temp=59.2 pwm=0.680 rpi: temp=38.0 mcu_temp: temp=23.6 sd_pos=860 sysload=0.06 cputime=7.027 memavail=1649852 print_time=204.991 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.461
Stats 197.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20275 bytes_read=38083 bytes_retransmit=9 bytes_invalid=0 send_seq=1167 receive_seq=1167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=60 temp=59.4 pwm=0.434 rpi: temp=37.0 mcu_temp: temp=24.0 sd_pos=860 sysload=0.06 cputime=7.063 memavail=1649668 print_time=205.993 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.455
Stats 198.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20374 bytes_read=38271 bytes_retransmit=9 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=60 temp=59.5 pwm=0.173 rpi: temp=38.5 mcu_temp: temp=23.8 sd_pos=891 sysload=0.06 cputime=7.101 memavail=1649540 print_time=206.995 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.413
Stats 199.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20459 bytes_read=38459 bytes_retransmit=9 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996538 heater_bed: target=60 temp=59.6 pwm=0.349 rpi: temp=38.0 mcu_temp: temp=23.7 sd_pos=891 sysload=0.06 cputime=7.137 memavail=1649472 print_time=207.996 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.346
Stats 200.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20626 bytes_read=38691 bytes_retransmit=9 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996538 heater_bed: target=60 temp=59.7 pwm=0.318 rpi: temp=37.5 mcu_temp: temp=23.9 sd_pos=891 sysload=0.06 cputime=7.178 memavail=1649668 print_time=208.997 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.334
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 201.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21279 bytes_read=39272 bytes_retransmit=9 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996538 heater_bed: target=60 temp=59.7 pwm=0.568 rpi: temp=37.5 mcu_temp: temp=23.2 sd_pos=928 sysload=0.05 cputime=7.260 memavail=1649428 print_time=212.058 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.424
Stats 202.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21407 bytes_read=39521 bytes_retransmit=9 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996538 heater_bed: target=60 temp=59.9 pwm=0.172 rpi: temp=37.0 mcu_temp: temp=24.1 sd_pos=928 sysload=0.05 cputime=7.285 memavail=1649592 print_time=212.058 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.513
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_x' reports GSTAT:      00000000
Stats 203.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=22028 bytes_read=40211 bytes_retransmit=9 bytes_invalid=0 send_seq=1265 receive_seq=1265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996540 heater_bed: target=60 temp=59.8 pwm=0.513 rpi: temp=38.5 mcu_temp: temp=23.5 sd_pos=928 sysload=0.05 cputime=7.359 memavail=1649292 print_time=212.258 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.305
Stats 204.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=22574 bytes_read=40746 bytes_retransmit=9 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996539 heater_bed: target=60 temp=59.8 pwm=0.349 rpi: temp=38.5 mcu_temp: temp=23.7 sd_pos=928 sysload=0.05 cputime=7.420 memavail=1649348 print_time=213.308 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.243
Stats 205.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=23321 bytes_read=41431 bytes_retransmit=9 bytes_invalid=0 send_seq=1346 receive_seq=1346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996539 heater_bed: target=60 temp=59.9 pwm=0.460 rpi: temp=37.5 mcu_temp: temp=23.8 sd_pos=928 sysload=0.05 cputime=7.495 memavail=1649620 print_time=214.498 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.482
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 206.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=24282 bytes_read=42373 bytes_retransmit=9 bytes_invalid=0 send_seq=1402 receive_seq=1402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=60 temp=59.9 pwm=0.540 rpi: temp=37.5 mcu_temp: temp=23.6 sd_pos=928 sysload=0.05 cputime=7.594 memavail=1649884 print_time=215.274 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.366
Stats 207.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=24831 bytes_read=42959 bytes_retransmit=9 bytes_invalid=0 send_seq=1441 receive_seq=1441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996540 heater_bed: target=60 temp=59.9 pwm=0.452 rpi: temp=38.0 mcu_temp: temp=23.8 sd_pos=928 sysload=0.05 cputime=7.657 memavail=1649864 print_time=216.274 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.430
Stats 208.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=25331 bytes_read=43585 bytes_retransmit=9 bytes_invalid=0 send_seq=1479 receive_seq=1479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996538 heater_bed: target=60 temp=59.8 pwm=0.767 rpi: temp=38.5 mcu_temp: temp=23.5 sd_pos=928 sysload=0.05 cputime=7.717 memavail=1650372 print_time=217.274 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.430
Stats 209.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=26079 bytes_read=44228 bytes_retransmit=9 bytes_invalid=0 send_seq=1520 receive_seq=1520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=59.9 pwm=0.507 rpi: temp=38.5 mcu_temp: temp=23.5 sd_pos=928 sysload=0.05 cputime=7.786 memavail=1650124 print_time=218.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.430
Stats 210.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=26798 bytes_read=44703 bytes_retransmit=9 bytes_invalid=0 send_seq=1547 receive_seq=1547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996544 heater_bed: target=60 temp=60.0 pwm=0.300 rpi: temp=37.0 mcu_temp: temp=23.8 sd_pos=928 sysload=0.05 cputime=7.829 memavail=1650332 print_time=222.795 buffer_time=3.679 print_stall=0 extruder: target=220 temp=220.6 pwm=0.430
Stats 211.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=26976 bytes_read=45049 bytes_retransmit=9 bytes_invalid=0 send_seq=1560 receive_seq=1560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=8 freq=71996544 heater_bed: target=60 temp=60.1 pwm=0.183 rpi: temp=38.0 mcu_temp: temp=23.9 sd_pos=928 sysload=0.05 cputime=7.879 memavail=1650332 print_time=222.795 buffer_time=2.679 print_stall=0 extruder: target=220 temp=220.5 pwm=0.457
Stats 212.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=27196 bytes_read=45374 bytes_retransmit=9 bytes_invalid=0 send_seq=1572 receive_seq=1572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=8 freq=71996546 heater_bed: target=60 temp=60.2 pwm=0.003 rpi: temp=38.9 mcu_temp: temp=23.8 sd_pos=928 sysload=0.05 cputime=7.916 memavail=1650584 print_time=222.797 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.389
Stats 213.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=27421 bytes_read=45700 bytes_retransmit=9 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=60.3 pwm=0.000 rpi: temp=38.9 mcu_temp: temp=23.8 sd_pos=928 sysload=0.05 cputime=7.963 memavail=1650580 print_time=222.797 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.297
Stats 214.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=27834 bytes_read=46162 bytes_retransmit=9 bytes_invalid=0 send_seq=1609 receive_seq=1609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=60.2 pwm=0.717 rpi: temp=39.4 mcu_temp: temp=23.9 sd_pos=928 sysload=0.05 cputime=8.008 memavail=1650332 print_time=223.297 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.515
Stats 215.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=28370 bytes_read=46762 bytes_retransmit=9 bytes_invalid=0 send_seq=1648 receive_seq=1648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=60.4 pwm=0.036 rpi: temp=38.5 mcu_temp: temp=24.2 sd_pos=928 sysload=0.05 cputime=8.052 memavail=1650600 print_time=224.297 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.352
Stats 216.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=28914 bytes_read=47343 bytes_retransmit=9 bytes_invalid=0 send_seq=1686 receive_seq=1686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=60.3 pwm=0.475 rpi: temp=38.9 mcu_temp: temp=24.1 sd_pos=928 sysload=0.04 cputime=8.113 memavail=1650336 print_time=225.297 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.372
Stats 217.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=29682 bytes_read=48041 bytes_retransmit=9 bytes_invalid=0 send_seq=1732 receive_seq=1732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=36 freq=71996544 heater_bed: target=60 temp=60.3 pwm=0.614 rpi: temp=38.9 mcu_temp: temp=24.0 sd_pos=928 sysload=0.04 cputime=8.183 memavail=1650336 print_time=229.335 buffer_time=3.204 print_stall=0 extruder: target=220 temp=220.2 pwm=0.408
Stats 218.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=29915 bytes_read=48391 bytes_retransmit=9 bytes_invalid=0 send_seq=1746 receive_seq=1746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=18 freq=71996545 heater_bed: target=60 temp=60.3 pwm=0.694 rpi: temp=38.0 mcu_temp: temp=24.0 sd_pos=928 sysload=0.04 cputime=8.231 memavail=1650108 print_time=229.335 buffer_time=2.203 print_stall=0 extruder: target=220 temp=220.1 pwm=0.417
Stats 219.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=30181 bytes_read=48717 bytes_retransmit=9 bytes_invalid=0 send_seq=1761 receive_seq=1761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996547 heater_bed: target=60 temp=60.4 pwm=0.428 rpi: temp=39.4 mcu_temp: temp=24.5 sd_pos=928 sysload=0.04 cputime=8.282 memavail=1649596 print_time=229.337 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.452
Stats 220.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=30382 bytes_read=49068 bytes_retransmit=9 bytes_invalid=0 send_seq=1775 receive_seq=1775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=60.5 pwm=0.241 rpi: temp=38.9 mcu_temp: temp=24.4 sd_pos=928 sysload=0.04 cputime=8.329 memavail=1649540 print_time=229.337 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.371
Stats 221.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=30901 bytes_read=49610 bytes_retransmit=9 bytes_invalid=0 send_seq=1808 receive_seq=1808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996544 heater_bed: target=60 temp=60.5 pwm=0.381 rpi: temp=38.9 mcu_temp: temp=23.7 sd_pos=928 sysload=0.04 cputime=8.371 memavail=1649860 print_time=230.287 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.373
Stats 222.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=31450 bytes_read=50225 bytes_retransmit=9 bytes_invalid=0 send_seq=1850 receive_seq=1850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996544 heater_bed: target=60 temp=60.6 pwm=0.153 rpi: temp=39.4 mcu_temp: temp=24.1 sd_pos=928 sysload=0.04 cputime=8.430 memavail=1649932 print_time=231.337 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.291
Stats 223.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=32140 bytes_read=50779 bytes_retransmit=9 bytes_invalid=0 send_seq=1881 receive_seq=1881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=60.6 pwm=0.123 rpi: temp=38.5 mcu_temp: temp=23.9 sd_pos=928 sysload=0.04 cputime=8.495 memavail=1649656 print_time=235.958 buffer_time=3.816 print_stall=0 extruder: target=220 temp=220.5 pwm=0.351
Stats 224.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=32368 bytes_read=51104 bytes_retransmit=9 bytes_invalid=0 send_seq=1893 receive_seq=1893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=60.6 pwm=0.297 rpi: temp=39.9 mcu_temp: temp=24.5 sd_pos=928 sysload=0.04 cputime=8.542 memavail=1649916 print_time=235.958 buffer_time=2.812 print_stall=0 extruder: target=220 temp=220.3 pwm=0.421
Stats 225.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=32891 bytes_read=51450 bytes_retransmit=9 bytes_invalid=0 send_seq=1912 receive_seq=1912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=60.5 pwm=0.371 rpi: temp=38.9 mcu_temp: temp=24.7 sd_pos=928 sysload=0.04 cputime=8.596 memavail=1649896 print_time=238.177 buffer_time=4.031 print_stall=0 extruder: target=220 temp=220.4 pwm=0.378
Stats 226.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=33135 bytes_read=51801 bytes_retransmit=9 bytes_invalid=0 send_seq=1926 receive_seq=1926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=60.6 pwm=0.045 rpi: temp=38.9 mcu_temp: temp=24.5 sd_pos=928 sysload=0.04 cputime=8.647 memavail=1650160 print_time=238.177 buffer_time=3.029 print_stall=0 extruder: target=220 temp=220.4 pwm=0.363
Stats 227.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=33303 bytes_read=52121 bytes_retransmit=9 bytes_invalid=0 send_seq=1937 receive_seq=1937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=60.5 pwm=0.291 rpi: temp=38.5 mcu_temp: temp=24.5 sd_pos=928 sysload=0.04 cputime=8.690 memavail=1650412 print_time=238.177 buffer_time=2.028 print_stall=0 extruder: target=220 temp=220.5 pwm=0.300
Stats 228.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=33760 bytes_read=52462 bytes_retransmit=9 bytes_invalid=0 send_seq=1952 receive_seq=1952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=60.4 pwm=0.503 rpi: temp=38.9 mcu_temp: temp=24.6 sd_pos=928 sysload=0.04 cputime=8.746 memavail=1650908 print_time=239.542 buffer_time=2.392 print_stall=0 extruder: target=220 temp=220.3 pwm=0.387
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
Stats 229.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=34619 bytes_read=53213 bytes_retransmit=9 bytes_invalid=0 send_seq=1990 receive_seq=1990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=60.5 pwm=0.249 rpi: temp=39.4 mcu_temp: temp=24.6 sd_pos=928 sysload=0.04 cputime=8.834 memavail=1650488 print_time=240.951 buffer_time=2.800 print_stall=0 extruder: target=220 temp=220.3 pwm=0.408
Stats 230.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=34907 bytes_read=53583 bytes_retransmit=9 bytes_invalid=0 send_seq=2006 receive_seq=2006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996548 heater_bed: target=60 temp=60.4 pwm=0.572 rpi: temp=39.4 mcu_temp: temp=24.3 sd_pos=928 sysload=0.04 cputime=8.888 memavail=1650480 print_time=241.751 buffer_time=2.600 print_stall=0 extruder: target=220 temp=220.4 pwm=0.343
Stats 231.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=35353 bytes_read=53950 bytes_retransmit=9 bytes_invalid=0 send_seq=2024 receive_seq=2024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=60.5 pwm=0.052 rpi: temp=39.4 mcu_temp: temp=24.6 sd_pos=928 sysload=0.03 cputime=8.943 memavail=1650216 print_time=244.351 buffer_time=4.198 print_stall=0 extruder: target=220 temp=220.3 pwm=0.432
Stats 232.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=35603 bytes_read=54340 bytes_retransmit=9 bytes_invalid=0 send_seq=2041 receive_seq=2041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=60.6 pwm=0.193 rpi: temp=38.5 mcu_temp: temp=24.5 sd_pos=928 sysload=0.03 cputime=8.995 memavail=1650532 print_time=244.351 buffer_time=3.198 print_stall=0 extruder: target=220 temp=220.2 pwm=0.483
Stats 233.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=35833 bytes_read=54735 bytes_retransmit=9 bytes_invalid=0 send_seq=2057 receive_seq=2057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=60.7 pwm=0.009 rpi: temp=39.4 mcu_temp: temp=25.0 sd_pos=928 sysload=0.03 cputime=9.049 memavail=1650752 print_time=244.351 buffer_time=2.197 print_stall=0 extruder: target=220 temp=220.2 pwm=0.366
Stats 234.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=36271 bytes_read=55117 bytes_retransmit=9 bytes_invalid=0 send_seq=2076 receive_seq=2076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=60.6 pwm=0.653 rpi: temp=39.4 mcu_temp: temp=25.3 sd_pos=928 sysload=0.03 cputime=9.106 memavail=1650172 print_time=246.758 buffer_time=3.603 print_stall=0 extruder: target=220 temp=220.0 pwm=0.500
Stats 235.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=36507 bytes_read=55504 bytes_retransmit=9 bytes_invalid=0 send_seq=2090 receive_seq=2090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996548 heater_bed: target=60 temp=60.8 pwm=0.000 rpi: temp=39.9 mcu_temp: temp=24.7 sd_pos=928 sysload=0.03 cputime=9.155 memavail=1650252 print_time=246.758 buffer_time=2.602 print_stall=0 extruder: target=220 temp=219.9 pwm=0.509
Stats 236.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=37058 bytes_read=55905 bytes_retransmit=9 bytes_invalid=0 send_seq=2110 receive_seq=2110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=60.8 pwm=0.000 rpi: temp=39.4 mcu_temp: temp=24.9 sd_pos=928 sysload=0.03 cputime=9.210 memavail=1650424 print_time=248.790 buffer_time=3.634 print_stall=0 extruder: target=220 temp=219.9 pwm=0.448
Stats 237.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=37237 bytes_read=56252 bytes_retransmit=9 bytes_invalid=0 send_seq=2122 receive_seq=2122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996548 heater_bed: target=60 temp=60.8 pwm=0.121 rpi: temp=39.4 mcu_temp: temp=25.6 sd_pos=928 sysload=0.03 cputime=9.260 memavail=1649936 print_time=248.790 buffer_time=2.633 print_stall=0 extruder: target=220 temp=219.8 pwm=0.448
Stats 238.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=37553 bytes_read=56664 bytes_retransmit=9 bytes_invalid=0 send_seq=2138 receive_seq=2138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=60.8 pwm=0.285 rpi: temp=39.9 mcu_temp: temp=24.8 sd_pos=928 sysload=0.03 cputime=9.313 memavail=1649608 print_time=249.540 buffer_time=2.382 print_stall=0 extruder: target=220 temp=219.8 pwm=0.443
Stats 239.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=37870 bytes_read=57050 bytes_retransmit=9 bytes_invalid=0 send_seq=2155 receive_seq=2155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=60.7 pwm=0.641 rpi: temp=39.4 mcu_temp: temp=24.8 sd_pos=928 sysload=0.03 cputime=9.367 memavail=1649556 print_time=250.290 buffer_time=2.131 print_stall=0 extruder: target=220 temp=219.7 pwm=0.374
Pausing toolhead to calculate extruder phase offset
Stats 240.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=38239 bytes_read=57417 bytes_retransmit=9 bytes_invalid=0 send_seq=2171 receive_seq=2171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996551 heater_bed: target=60 temp=60.9 pwm=0.000 rpi: temp=39.9 mcu_temp: temp=25.1 sd_pos=942 sysload=0.03 cputime=9.406 memavail=1649756 print_time=252.548 buffer_time=3.389 print_stall=0 extruder: target=220 temp=219.7 pwm=0.396
Stats 241.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=38482 bytes_read=57814 bytes_retransmit=9 bytes_invalid=0 send_seq=2187 receive_seq=2187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996550 heater_bed: target=60 temp=60.6 pwm=0.841 rpi: temp=39.4 mcu_temp: temp=25.2 sd_pos=942 sysload=0.03 cputime=9.462 memavail=1649516 print_time=252.548 buffer_time=2.388 print_stall=0 extruder: target=220 temp=219.6 pwm=0.472
Stats 242.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=38708 bytes_read=58190 bytes_retransmit=9 bytes_invalid=0 send_seq=2202 receive_seq=2202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=60.7 pwm=0.209 rpi: temp=39.9 mcu_temp: temp=25.2 sd_pos=942 sysload=0.03 cputime=9.501 memavail=1649188 print_time=252.548 buffer_time=1.387 print_stall=0 extruder: target=220 temp=219.8 pwm=0.298
Stats 243.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=38990 bytes_read=58567 bytes_retransmit=9 bytes_invalid=0 send_seq=2217 receive_seq=2217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996553 heater_bed: target=60 temp=60.6 pwm=0.531 rpi: temp=39.9 mcu_temp: temp=25.1 sd_pos=942 sysload=0.03 cputime=9.558 memavail=1649448 print_time=252.549 buffer_time=0.388 print_stall=0 extruder: target=220 temp=219.6 pwm=0.432
Stats 244.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=40641 bytes_read=59087 bytes_retransmit=9 bytes_invalid=0 send_seq=2254 receive_seq=2254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996554 heater_bed: target=60 temp=60.7 pwm=0.371 rpi: temp=40.4 mcu_temp: temp=25.4 sd_pos=2288 sysload=0.03 cputime=9.639 memavail=1649944 print_time=255.364 buffer_time=2.202 print_stall=0 extruder: target=220 temp=219.6 pwm=0.439
Stats 245.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=41727 bytes_read=59534 bytes_retransmit=9 bytes_invalid=0 send_seq=2281 receive_seq=2281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996566 heater_bed: target=60 temp=60.7 pwm=0.212 rpi: temp=39.4 mcu_temp: temp=25.4 sd_pos=3007 sysload=0.03 cputime=9.709 memavail=1649700 print_time=256.488 buffer_time=2.325 print_stall=0 extruder: target=220 temp=219.5 pwm=0.501
Stats 246.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=42604 bytes_read=59946 bytes_retransmit=9 bytes_invalid=0 send_seq=2306 receive_seq=2306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=60 temp=60.8 pwm=0.016 rpi: temp=39.9 mcu_temp: temp=24.9 sd_pos=3507 sysload=0.02 cputime=9.771 memavail=1649700 print_time=257.329 buffer_time=2.165 print_stall=0 extruder: target=220 temp=219.7 pwm=0.355
Stats 247.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=43456 bytes_read=60378 bytes_retransmit=9 bytes_invalid=0 send_seq=2329 receive_seq=2329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996570 heater_bed: target=60 temp=60.7 pwm=0.383 rpi: temp=39.9 mcu_temp: temp=25.9 sd_pos=4052 sysload=0.02 cputime=9.837 memavail=1649392 print_time=258.252 buffer_time=2.087 print_stall=0 extruder: target=220 temp=219.6 pwm=0.500
Stats 248.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=44520 bytes_read=60829 bytes_retransmit=9 bytes_invalid=0 send_seq=2356 receive_seq=2356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996571 heater_bed: target=60 temp=60.6 pwm=0.690 rpi: temp=40.4 mcu_temp: temp=25.5 sd_pos=4602 sysload=0.02 cputime=9.902 memavail=1649456 print_time=259.253 buffer_time=2.087 print_stall=0 extruder: target=220 temp=219.5 pwm=0.510
Stats 249.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=45314 bytes_read=61226 bytes_retransmit=9 bytes_invalid=0 send_seq=2378 receive_seq=2378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996571 heater_bed: target=60 temp=60.8 pwm=0.112 rpi: temp=40.4 mcu_temp: temp=25.6 sd_pos=5178 sysload=0.02 cputime=9.967 memavail=1649212 print_time=260.338 buffer_time=2.172 print_stall=0 extruder: target=220 temp=219.5 pwm=0.514
Stats 250.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=46384 bytes_read=61683 bytes_retransmit=9 bytes_invalid=0 send_seq=2406 receive_seq=2406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=60 temp=60.6 pwm=0.645 rpi: temp=39.9 mcu_temp: temp=25.7 sd_pos=5545 sysload=0.02 cputime=10.033 memavail=1649204 print_time=261.221 buffer_time=2.054 print_stall=0 extruder: target=220 temp=219.7 pwm=0.412
Stats 251.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=47383 bytes_read=62119 bytes_retransmit=9 bytes_invalid=0 send_seq=2433 receive_seq=2433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996568 heater_bed: target=60 temp=60.7 pwm=0.481 rpi: temp=39.4 mcu_temp: temp=25.3 sd_pos=5770 sysload=0.02 cputime=10.094 memavail=1649192 print_time=262.670 buffer_time=2.502 print_stall=0 extruder: target=220 temp=219.9 pwm=0.362
Stats 252.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000041 bytes_write=48020 bytes_read=62506 bytes_retransmit=9 bytes_invalid=0 send_seq=2453 receive_seq=2453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996567 heater_bed: target=60 temp=60.6 pwm=0.581 rpi: temp=40.4 mcu_temp: temp=26.2 sd_pos=5857 sysload=0.02 cputime=10.132 memavail=1649212 print_time=263.261 buffer_time=2.092 print_stall=0 extruder: target=220 temp=219.8 pwm=0.397
Stats 253.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=48913 bytes_read=62977 bytes_retransmit=9 bytes_invalid=0 send_seq=2478 receive_seq=2478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=60 temp=60.6 pwm=0.502 rpi: temp=40.4 mcu_temp: temp=25.8 sd_pos=5998 sysload=0.02 cputime=10.190 memavail=1649204 print_time=264.483 buffer_time=2.314 print_stall=0 extruder: target=220 temp=219.8 pwm=0.456
Stats 254.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=49865 bytes_read=63394 bytes_retransmit=9 bytes_invalid=0 send_seq=2504 receive_seq=2504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996569 heater_bed: target=60 temp=60.8 pwm=0.150 rpi: temp=39.9 mcu_temp: temp=26.1 sd_pos=6179 sysload=0.02 cputime=10.248 memavail=1649212 print_time=265.759 buffer_time=2.588 print_stall=0 extruder: target=220 temp=219.9 pwm=0.463
Stats 255.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=50516 bytes_read=63776 bytes_retransmit=9 bytes_invalid=0 send_seq=2523 receive_seq=2523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=60 temp=60.8 pwm=0.008 rpi: temp=40.4 mcu_temp: temp=25.9 sd_pos=6239 sysload=0.02 cputime=10.300 memavail=1649204 print_time=266.395 buffer_time=2.224 print_stall=0 extruder: target=220 temp=220.0 pwm=0.381
Stats 256.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=51435 bytes_read=64242 bytes_retransmit=9 bytes_invalid=0 send_seq=2550 receive_seq=2550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996568 heater_bed: target=60 temp=60.8 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.1 sd_pos=6422 sysload=0.02 cputime=10.360 memavail=1649208 print_time=267.627 buffer_time=2.455 print_stall=0 extruder: target=220 temp=219.9 pwm=0.472
Stats 257.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=52038 bytes_read=64639 bytes_retransmit=9 bytes_invalid=0 send_seq=2572 receive_seq=2572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996566 heater_bed: target=60 temp=60.7 pwm=0.340 rpi: temp=39.9 mcu_temp: temp=25.9 sd_pos=6482 sysload=0.02 cputime=10.414 memavail=1649268 print_time=268.207 buffer_time=2.035 print_stall=0 extruder: target=220 temp=220.0 pwm=0.393
Stats 258.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=52883 bytes_read=65061 bytes_retransmit=9 bytes_invalid=0 send_seq=2596 receive_seq=2596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=60 temp=60.7 pwm=0.405 rpi: temp=40.4 mcu_temp: temp=25.8 sd_pos=6659 sysload=0.02 cputime=10.470 memavail=1649328 print_time=269.270 buffer_time=2.097 print_stall=0 extruder: target=220 temp=220.1 pwm=0.383
Stats 259.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=54301 bytes_read=65562 bytes_retransmit=9 bytes_invalid=0 send_seq=2630 receive_seq=2630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996564 heater_bed: target=55 temp=60.7 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=26.1 sd_pos=7240 sysload=0.02 cputime=10.534 memavail=1649608 print_time=270.368 buffer_time=2.193 print_stall=0 extruder: target=215 temp=220.1 pwm=0.000
Stats 260.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=55294 bytes_read=65974 bytes_retransmit=9 bytes_invalid=0 send_seq=2655 receive_seq=2655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=20 freq=71996567 heater_bed: target=55 temp=60.8 pwm=0.000 rpi: temp=39.4 mcu_temp: temp=26.6 sd_pos=7828 sysload=0.02 cputime=10.598 memavail=1649112 print_time=271.244 buffer_time=2.069 print_stall=0 extruder: target=215 temp=220.1 pwm=0.000
Stats 261.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=57077 bytes_read=66461 bytes_retransmit=9 bytes_invalid=0 send_seq=2695 receive_seq=2695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=20 freq=71996566 heater_bed: target=55 temp=60.7 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.6 sd_pos=8937 sysload=0.02 cputime=10.669 memavail=1649016 print_time=272.476 buffer_time=2.299 print_stall=0 extruder: target=215 temp=220.3 pwm=0.000
Stats 262.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=61293 bytes_read=67187 bytes_retransmit=9 bytes_invalid=0 send_seq=2774 receive_seq=2774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=60.6 pwm=0.000 rpi: temp=38.9 mcu_temp: temp=26.7 sd_pos=10284 sysload=0.02 cputime=10.725 memavail=1649280 print_time=273.403 buffer_time=2.226 print_stall=0 extruder: target=215 temp=220.0 pwm=0.005
Stats 263.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000064 bytes_write=63598 bytes_read=67730 bytes_retransmit=9 bytes_invalid=0 send_seq=2822 receive_seq=2822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=60.7 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=26.5 sd_pos=10933 sysload=0.02 cputime=10.797 memavail=1649232 print_time=274.255 buffer_time=2.076 print_stall=0 extruder: target=215 temp=219.8 pwm=0.021
Stats 264.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000064 bytes_write=64408 bytes_read=68147 bytes_retransmit=9 bytes_invalid=0 send_seq=2845 receive_seq=2845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=60.6 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.8 sd_pos=11106 sysload=0.02 cputime=10.855 memavail=1649548 print_time=275.286 buffer_time=2.106 print_stall=0 extruder: target=215 temp=219.5 pwm=0.182
Stats 265.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000064 bytes_write=65151 bytes_read=68568 bytes_retransmit=9 bytes_invalid=0 send_seq=2866 receive_seq=2866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=60.5 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=26.4 sd_pos=11255 sysload=0.02 cputime=10.912 memavail=1649596 print_time=276.482 buffer_time=2.301 print_stall=0 extruder: target=215 temp=219.4 pwm=0.026
Stats 266.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000064 bytes_write=65994 bytes_read=68975 bytes_retransmit=9 bytes_invalid=0 send_seq=2890 receive_seq=2890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=60.5 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=27.1 sd_pos=11407 sysload=0.10 cputime=10.971 memavail=1650184 print_time=277.827 buffer_time=2.646 print_stall=0 extruder: target=215 temp=218.9 pwm=0.164
Stats 267.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000064 bytes_write=66546 bytes_read=69362 bytes_retransmit=9 bytes_invalid=0 send_seq=2907 receive_seq=2907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996566 heater_bed: target=55 temp=60.3 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.9 sd_pos=11469 sysload=0.10 cputime=11.024 memavail=1650172 print_time=278.527 buffer_time=2.346 print_stall=0 extruder: target=215 temp=218.2 pwm=0.383
Stats 268.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=67138 bytes_read=69788 bytes_retransmit=9 bytes_invalid=0 send_seq=2926 receive_seq=2926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=55 temp=60.3 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=26.9 sd_pos=11559 sysload=0.10 cputime=11.080 memavail=1650240 print_time=279.271 buffer_time=2.089 print_stall=0 extruder: target=215 temp=217.6 pwm=0.405
Stats 269.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=67985 bytes_read=70180 bytes_retransmit=9 bytes_invalid=0 send_seq=2947 receive_seq=2947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=55 temp=60.2 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.8 sd_pos=11710 sysload=0.10 cputime=11.137 memavail=1650508 print_time=280.751 buffer_time=2.569 print_stall=0 extruder: target=215 temp=217.0 pwm=0.536
Stats 270.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=68620 bytes_read=70582 bytes_retransmit=9 bytes_invalid=0 send_seq=2967 receive_seq=2967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996568 heater_bed: target=55 temp=60.2 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.2 sd_pos=11772 sysload=0.10 cputime=11.195 memavail=1650500 print_time=281.510 buffer_time=2.327 print_stall=0 extruder: target=215 temp=216.5 pwm=0.567
Stats 271.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=69309 bytes_read=71003 bytes_retransmit=9 bytes_invalid=0 send_seq=2988 receive_seq=2988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996567 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.9 sd_pos=11831 sysload=0.09 cputime=11.253 memavail=1650232 print_time=282.269 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.7 pwm=0.645
Stats 272.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=70199 bytes_read=71410 bytes_retransmit=9 bytes_invalid=0 send_seq=3012 receive_seq=3012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996567 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=39.9 mcu_temp: temp=26.7 sd_pos=11950 sysload=0.09 cputime=11.310 memavail=1650800 print_time=283.777 buffer_time=2.594 print_stall=0 extruder: target=215 temp=215.3 pwm=0.601
Stats 273.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=70801 bytes_read=71822 bytes_retransmit=9 bytes_invalid=0 send_seq=3031 receive_seq=3031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996566 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.2 sd_pos=12040 sysload=0.09 cputime=11.364 memavail=1650804 print_time=284.528 buffer_time=2.344 print_stall=0 extruder: target=215 temp=214.9 pwm=0.601
Stats 274.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=71388 bytes_read=72238 bytes_retransmit=9 bytes_invalid=0 send_seq=3051 receive_seq=3051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=26.8 sd_pos=12099 sysload=0.09 cputime=11.423 memavail=1650492 print_time=285.240 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.3 pwm=0.707
Stats 275.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=72259 bytes_read=72650 bytes_retransmit=9 bytes_invalid=0 send_seq=3076 receive_seq=3076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996564 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.1 sd_pos=12252 sysload=0.09 cputime=11.480 memavail=1650632 print_time=286.622 buffer_time=2.437 print_stall=0 extruder: target=215 temp=214.0 pwm=0.638
Stats 276.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=72805 bytes_read=73042 bytes_retransmit=9 bytes_invalid=0 send_seq=3094 receive_seq=3094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.4 sd_pos=12342 sysload=0.08 cputime=11.535 memavail=1650068 print_time=287.288 buffer_time=2.102 print_stall=0 extruder: target=215 temp=213.7 pwm=0.638
Stats 277.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=73607 bytes_read=73468 bytes_retransmit=9 bytes_invalid=0 send_seq=3116 receive_seq=3116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=59.7 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=26.9 sd_pos=12488 sysload=0.08 cputime=11.593 memavail=1649816 print_time=288.457 buffer_time=2.270 print_stall=0 extruder: target=215 temp=213.7 pwm=0.483
Stats 278.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=74409 bytes_read=73895 bytes_retransmit=9 bytes_invalid=0 send_seq=3141 receive_seq=3141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=59.6 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=27.2 sd_pos=12673 sysload=0.08 cputime=11.650 memavail=1649748 print_time=289.445 buffer_time=2.257 print_stall=0 extruder: target=215 temp=213.7 pwm=0.443
Stats 279.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=75428 bytes_read=74322 bytes_retransmit=9 bytes_invalid=0 send_seq=3166 receive_seq=3166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=59.3 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.3 sd_pos=12989 sysload=0.08 cputime=11.710 memavail=1649192 print_time=290.218 buffer_time=2.029 print_stall=0 extruder: target=215 temp=213.6 pwm=0.493
Stats 280.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=76809 bytes_read=74798 bytes_retransmit=9 bytes_invalid=0 send_seq=3198 receive_seq=3198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=59.2 pwm=0.000 rpi: temp=39.9 mcu_temp: temp=27.5 sd_pos=13834 sysload=0.08 cputime=11.780 memavail=1649200 print_time=291.330 buffer_time=2.141 print_stall=0 extruder: target=215 temp=213.7 pwm=0.459
Stats 281.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=77735 bytes_read=75200 bytes_retransmit=9 bytes_invalid=0 send_seq=3221 receive_seq=3221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996568 heater_bed: target=55 temp=59.2 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.4 sd_pos=14669 sysload=0.16 cputime=11.849 memavail=1649140 print_time=292.362 buffer_time=2.172 print_stall=0 extruder: target=215 temp=213.6 pwm=0.456
Stats 282.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=78816 bytes_read=75627 bytes_retransmit=9 bytes_invalid=0 send_seq=3246 receive_seq=3246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996567 heater_bed: target=55 temp=59.0 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.5 sd_pos=15393 sysload=0.16 cputime=11.917 memavail=1648832 print_time=293.286 buffer_time=2.096 print_stall=0 extruder: target=215 temp=213.6 pwm=0.471
Stats 283.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=79847 bytes_read=76093 bytes_retransmit=9 bytes_invalid=0 send_seq=3273 receive_seq=3273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996566 heater_bed: target=55 temp=58.9 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.1 sd_pos=16271 sysload=0.16 cputime=11.988 memavail=1649084 print_time=294.387 buffer_time=2.196 print_stall=0 extruder: target=215 temp=214.0 pwm=0.311
Stats 284.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=82901 bytes_read=76675 bytes_retransmit=9 bytes_invalid=0 send_seq=3332 receive_seq=3332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996567 heater_bed: target=55 temp=58.8 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.4 sd_pos=17938 sysload=0.16 cputime=12.072 memavail=1649396 print_time=295.310 buffer_time=2.117 print_stall=0 extruder: target=215 temp=213.8 pwm=0.460
Stats 285.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=84643 bytes_read=77162 bytes_retransmit=9 bytes_invalid=0 send_seq=3369 receive_seq=3369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996570 heater_bed: target=55 temp=58.7 pwm=0.000 rpi: temp=40.4 mcu_temp: temp=27.4 sd_pos=18321 sysload=0.16 cputime=12.136 memavail=1649468 print_time=296.307 buffer_time=2.114 print_stall=0 extruder: target=215 temp=213.8 pwm=0.521
Stats 286.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=85435 bytes_read=77588 bytes_retransmit=9 bytes_invalid=0 send_seq=3391 receive_seq=3391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=55 temp=58.5 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.9 sd_pos=18498 sysload=0.14 cputime=12.195 memavail=1649476 print_time=297.405 buffer_time=2.212 print_stall=0 extruder: target=215 temp=214.0 pwm=0.448
Stats 287.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=86191 bytes_read=77985 bytes_retransmit=9 bytes_invalid=0 send_seq=3413 receive_seq=3413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996572 heater_bed: target=55 temp=58.6 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=28.0 sd_pos=18649 sysload=0.14 cputime=12.256 memavail=1649468 print_time=298.671 buffer_time=2.476 print_stall=0 extruder: target=215 temp=213.7 pwm=0.596
Stats 288.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=86756 bytes_read=78391 bytes_retransmit=9 bytes_invalid=0 send_seq=3431 receive_seq=3431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996570 heater_bed: target=55 temp=58.4 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.6 sd_pos=18708 sysload=0.14 cputime=12.313 memavail=1649480 print_time=299.345 buffer_time=2.150 print_stall=0 extruder: target=215 temp=213.6 pwm=0.648
Stats 289.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=87641 bytes_read=78820 bytes_retransmit=9 bytes_invalid=0 send_seq=3456 receive_seq=3456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=55 temp=58.3 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=27.6 sd_pos=18857 sysload=0.14 cputime=12.369 memavail=1649472 print_time=300.820 buffer_time=2.625 print_stall=0 extruder: target=215 temp=213.7 pwm=0.535
Stats 290.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=88244 bytes_read=79192 bytes_retransmit=9 bytes_invalid=0 send_seq=3475 receive_seq=3475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996567 heater_bed: target=55 temp=58.2 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.8 sd_pos=18918 sysload=0.14 cputime=12.421 memavail=1649532 print_time=301.590 buffer_time=2.394 print_stall=0 extruder: target=215 temp=213.7 pwm=0.460
Stats 291.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=88815 bytes_read=79573 bytes_retransmit=9 bytes_invalid=0 send_seq=3493 receive_seq=3493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=55 temp=58.2 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=27.6 sd_pos=19008 sysload=0.13 cputime=12.477 memavail=1649276 print_time=302.384 buffer_time=2.187 print_stall=0 extruder: target=215 temp=213.5 pwm=0.608
Stats 292.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=89658 bytes_read=80003 bytes_retransmit=9 bytes_invalid=0 send_seq=3517 receive_seq=3517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=58.1 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=27.5 sd_pos=19159 sysload=0.13 cputime=12.517 memavail=1649588 print_time=304.004 buffer_time=2.807 print_stall=0 extruder: target=215 temp=213.6 pwm=0.524
Stats 293.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=90281 bytes_read=80405 bytes_retransmit=9 bytes_invalid=0 send_seq=3537 receive_seq=3537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=58.1 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=28.0 sd_pos=19221 sysload=0.13 cputime=12.573 memavail=1649288 print_time=304.800 buffer_time=2.603 print_stall=0 extruder: target=215 temp=213.5 pwm=0.510
Stats 294.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=91148 bytes_read=80822 bytes_retransmit=9 bytes_invalid=0 send_seq=3560 receive_seq=3560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=58.0 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=28.5 sd_pos=19281 sysload=0.13 cputime=12.633 memavail=1649540 print_time=305.613 buffer_time=2.415 print_stall=0 extruder: target=215 temp=213.5 pwm=0.518
Stats 295.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=91771 bytes_read=81248 bytes_retransmit=9 bytes_invalid=0 send_seq=3582 receive_seq=3582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=58.0 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=28.0 sd_pos=19342 sysload=0.13 cputime=12.692 memavail=1649288 print_time=306.426 buffer_time=2.227 print_stall=0 extruder: target=215 temp=213.5 pwm=0.500
Stats 296.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=92323 bytes_read=81620 bytes_retransmit=9 bytes_invalid=0 send_seq=3599 receive_seq=3599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=57.8 pwm=0.186 rpi: temp=39.9 mcu_temp: temp=28.0 sd_pos=19399 sysload=0.20 cputime=12.746 memavail=1649044 print_time=307.229 buffer_time=2.029 print_stall=0 extruder: target=215 temp=213.7 pwm=0.430
Stats 297.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=93244 bytes_read=82042 bytes_retransmit=9 bytes_invalid=0 send_seq=3623 receive_seq=3623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=57.7 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=28.5 sd_pos=19551 sysload=0.20 cputime=12.787 memavail=1649040 print_time=308.802 buffer_time=2.601 print_stall=0 extruder: target=215 temp=213.5 pwm=0.571
Stats 298.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000068 bytes_write=93873 bytes_read=82483 bytes_retransmit=9 bytes_invalid=0 send_seq=3645 receive_seq=3645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996558 heater_bed: target=55 temp=57.5 pwm=0.118 rpi: temp=41.9 mcu_temp: temp=29.1 sd_pos=19643 sysload=0.20 cputime=12.844 memavail=1649304 print_time=309.562 buffer_time=2.361 print_stall=0 extruder: target=215 temp=213.7 pwm=0.525
Stats 299.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000068 bytes_write=94398 bytes_read=82865 bytes_retransmit=9 bytes_invalid=0 send_seq=3664 receive_seq=3664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=57.5 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=28.8 sd_pos=19703 sysload=0.20 cputime=12.897 memavail=1649296 print_time=310.299 buffer_time=2.098 print_stall=0 extruder: target=215 temp=213.8 pwm=0.412
Stats 300.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000068 bytes_write=95261 bytes_read=83282 bytes_retransmit=9 bytes_invalid=0 send_seq=3687 receive_seq=3687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=57.2 pwm=0.245 rpi: temp=41.9 mcu_temp: temp=28.4 sd_pos=19825 sysload=0.20 cputime=12.936 memavail=1649560 print_time=311.685 buffer_time=2.483 print_stall=0 extruder: target=215 temp=213.9 pwm=0.420
Stats 301.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000068 bytes_write=95838 bytes_read=83703 bytes_retransmit=9 bytes_invalid=0 send_seq=3708 receive_seq=3708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=57.3 pwm=0.000 rpi: temp=40.9 mcu_temp: temp=28.4 sd_pos=19913 sysload=0.18 cputime=12.993 memavail=1649288 print_time=312.320 buffer_time=2.118 print_stall=0 extruder: target=215 temp=213.8 pwm=0.508
Stats 302.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000068 bytes_write=96574 bytes_read=84090 bytes_retransmit=9 bytes_invalid=0 send_seq=3728 receive_seq=3728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=56.9 pwm=0.779 rpi: temp=42.8 mcu_temp: temp=28.0 sd_pos=20067 sysload=0.18 cputime=13.049 memavail=1649876 print_time=313.461 buffer_time=2.259 print_stall=0 extruder: target=215 temp=214.1 pwm=0.439
Stats 303.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=97380 bytes_read=84522 bytes_retransmit=9 bytes_invalid=0 send_seq=3751 receive_seq=3751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=57.0 pwm=0.029 rpi: temp=42.8 mcu_temp: temp=28.8 sd_pos=20412 sysload=0.18 cputime=13.086 memavail=1649876 print_time=314.335 buffer_time=2.132 print_stall=0 extruder: target=215 temp=214.0 pwm=0.495
Stats 304.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=98886 bytes_read=85013 bytes_retransmit=9 bytes_invalid=0 send_seq=3786 receive_seq=3786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=56.9 pwm=0.029 rpi: temp=40.9 mcu_temp: temp=29.1 sd_pos=21205 sysload=0.18 cputime=13.160 memavail=1650124 print_time=315.401 buffer_time=2.196 print_stall=0 extruder: target=215 temp=214.1 pwm=0.524
Stats 305.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=99874 bytes_read=85430 bytes_retransmit=9 bytes_invalid=0 send_seq=3812 receive_seq=3812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996558 heater_bed: target=55 temp=57.0 pwm=0.000 rpi: temp=42.4 mcu_temp: temp=28.4 sd_pos=22030 sysload=0.18 cputime=13.232 memavail=1650404 print_time=316.483 buffer_time=2.278 print_stall=0 extruder: target=215 temp=214.3 pwm=0.451
Stats 306.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=101036 bytes_read=85883 bytes_retransmit=9 bytes_invalid=0 send_seq=3840 receive_seq=3840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996568 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=28.8 sd_pos=22704 sysload=0.17 cputime=13.302 memavail=1650400 print_time=317.359 buffer_time=2.153 print_stall=0 extruder: target=215 temp=214.4 pwm=0.413
Stats 307.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=101814 bytes_read=86309 bytes_retransmit=9 bytes_invalid=0 send_seq=3862 receive_seq=3862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996567 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=28.1 sd_pos=23334 sysload=0.17 cputime=13.366 memavail=1650164 print_time=318.206 buffer_time=1.999 print_stall=0 extruder: target=215 temp=214.5 pwm=0.403
Stats 308.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000074 bytes_write=104043 bytes_read=86841 bytes_retransmit=9 bytes_invalid=0 send_seq=3908 receive_seq=3908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996569 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=29.0 sd_pos=24775 sysload=0.17 cputime=13.447 memavail=1650268 print_time=319.371 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.5 pwm=0.469
Stats 309.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000074 bytes_write=106804 bytes_read=87428 bytes_retransmit=9 bytes_invalid=0 send_seq=3962 receive_seq=3962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996568 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=42.4 mcu_temp: temp=29.0 sd_pos=26323 sysload=0.17 cputime=13.527 memavail=1650268 print_time=320.244 buffer_time=2.036 print_stall=0 extruder: target=215 temp=214.3 pwm=0.588
Stats 310.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000074 bytes_write=108687 bytes_read=87934 bytes_retransmit=9 bytes_invalid=0 send_seq=4003 receive_seq=4003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996566 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=29.4 sd_pos=28263 sysload=0.17 cputime=13.611 memavail=1650520 print_time=321.341 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.4 pwm=0.536
Stats 311.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000074 bytes_write=110587 bytes_read=88426 bytes_retransmit=9 bytes_invalid=0 send_seq=4044 receive_seq=4044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996564 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=29.3 sd_pos=29382 sysload=0.16 cputime=13.690 memavail=1650484 print_time=322.518 buffer_time=2.309 print_stall=0 extruder: target=215 temp=214.3 pwm=0.523
Stats 312.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000074 bytes_write=111402 bytes_read=88853 bytes_retransmit=9 bytes_invalid=0 send_seq=4066 receive_seq=4066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=56.7 pwm=0.024 rpi: temp=42.8 mcu_temp: temp=29.2 sd_pos=29537 sysload=0.16 cputime=13.749 memavail=1651032 print_time=323.274 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.1 pwm=0.670
Stats 313.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=112230 bytes_read=89280 bytes_retransmit=9 bytes_invalid=0 send_seq=4088 receive_seq=4088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=56.7 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=29.1 sd_pos=29687 sysload=0.16 cputime=13.808 memavail=1650796 print_time=324.220 buffer_time=2.010 print_stall=0 extruder: target=215 temp=214.0 pwm=0.606
Stats 314.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=113181 bytes_read=89697 bytes_retransmit=9 bytes_invalid=0 send_seq=4114 receive_seq=4114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=56.7 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=29.3 sd_pos=29839 sysload=0.16 cputime=13.869 memavail=1650524 print_time=325.292 buffer_time=2.081 print_stall=0 extruder: target=215 temp=214.0 pwm=0.633
Stats 315.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=114179 bytes_read=90134 bytes_retransmit=9 bytes_invalid=0 send_seq=4138 receive_seq=4138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=56.6 pwm=0.156 rpi: temp=42.4 mcu_temp: temp=29.5 sd_pos=29986 sysload=0.16 cputime=13.930 memavail=1650772 print_time=326.451 buffer_time=2.237 print_stall=0 extruder: target=215 temp=214.1 pwm=0.497
Stats 316.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=115146 bytes_read=90565 bytes_retransmit=9 bytes_invalid=0 send_seq=4164 receive_seq=4164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=56.6 pwm=0.000 rpi: temp=42.4 mcu_temp: temp=28.9 sd_pos=30135 sysload=0.14 cputime=13.988 memavail=1650540 print_time=327.669 buffer_time=2.454 print_stall=0 extruder: target=215 temp=214.0 pwm=0.597
Stats 317.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=115847 bytes_read=90967 bytes_retransmit=9 bytes_invalid=0 send_seq=4187 receive_seq=4187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=56.5 pwm=0.000 rpi: temp=41.4 mcu_temp: temp=29.5 sd_pos=30195 sysload=0.14 cputime=14.044 memavail=1650028 print_time=328.291 buffer_time=2.076 print_stall=0 extruder: target=215 temp=214.0 pwm=0.585
Stats 318.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=116813 bytes_read=91419 bytes_retransmit=9 bytes_invalid=0 send_seq=4211 receive_seq=4211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=56.5 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=29.7 sd_pos=30348 sysload=0.14 cputime=14.106 memavail=1650044 print_time=329.551 buffer_time=2.333 print_stall=0 extruder: target=215 temp=214.0 pwm=0.585
Stats 319.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=117888 bytes_read=91875 bytes_retransmit=9 bytes_invalid=0 send_seq=4242 receive_seq=4242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996556 heater_bed: target=55 temp=56.2 pwm=0.302 rpi: temp=41.9 mcu_temp: temp=29.3 sd_pos=30531 sysload=0.14 cputime=14.170 memavail=1650280 print_time=330.810 buffer_time=2.591 print_stall=0 extruder: target=215 temp=214.2 pwm=0.470
Stats 320.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=118561 bytes_read=92267 bytes_retransmit=9 bytes_invalid=0 send_seq=4263 receive_seq=4263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996555 heater_bed: target=55 temp=56.3 pwm=0.000 rpi: temp=42.8 mcu_temp: temp=29.8 sd_pos=30622 sysload=0.14 cputime=14.225 memavail=1650044 print_time=331.437 buffer_time=2.216 print_stall=0 extruder: target=215 temp=214.1 pwm=0.582
Stats 321.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=119530 bytes_read=92709 bytes_retransmit=9 bytes_invalid=0 send_seq=4288 receive_seq=4288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996556 heater_bed: target=55 temp=56.1 pwm=0.159 rpi: temp=42.4 mcu_temp: temp=29.6 sd_pos=30770 sysload=0.13 cputime=14.286 memavail=1649548 print_time=332.647 buffer_time=2.425 print_stall=0 extruder: target=215 temp=214.2 pwm=0.504
Stats 322.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=120187 bytes_read=93120 bytes_retransmit=9 bytes_invalid=0 send_seq=4310 receive_seq=4310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=56.1 pwm=0.000 rpi: temp=41.9 mcu_temp: temp=30.0 sd_pos=30859 sysload=0.13 cputime=14.323 memavail=1649692 print_time=333.234 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.4 pwm=0.442
Stats 323.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=121174 bytes_read=93552 bytes_retransmit=9 bytes_invalid=0 send_seq=4336 receive_seq=4336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996553 heater_bed: target=55 temp=56.0 pwm=0.416 rpi: temp=42.4 mcu_temp: temp=29.5 sd_pos=31009 sysload=0.13 cputime=14.384 memavail=1649800 print_time=334.349 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.5 pwm=0.521
Stats 324.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=122100 bytes_read=93994 bytes_retransmit=9 bytes_invalid=0 send_seq=4361 receive_seq=4361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996555 heater_bed: target=55 temp=56.0 pwm=0.085 rpi: temp=43.3 mcu_temp: temp=29.5 sd_pos=31156 sysload=0.13 cputime=14.446 memavail=1649812 print_time=335.357 buffer_time=2.132 print_stall=0 extruder: target=215 temp=214.6 pwm=0.463
Stats 325.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=123025 bytes_read=94430 bytes_retransmit=9 bytes_invalid=0 send_seq=4388 receive_seq=4388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996559 heater_bed: target=55 temp=56.1 pwm=0.000 rpi: temp=42.8 mcu_temp: temp=29.3 sd_pos=31305 sysload=0.13 cputime=14.510 memavail=1649544 print_time=336.230 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.4 pwm=0.600
Stats 326.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=124530 bytes_read=94892 bytes_retransmit=9 bytes_invalid=0 send_seq=4423 receive_seq=4423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996558 heater_bed: target=55 temp=56.1 pwm=0.005 rpi: temp=43.8 mcu_temp: temp=29.8 sd_pos=32014 sysload=0.12 cputime=14.578 memavail=1649796 print_time=337.408 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.6 pwm=0.495
Stats 327.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=125622 bytes_read=95344 bytes_retransmit=9 bytes_invalid=0 send_seq=4450 receive_seq=4450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=56.0 pwm=0.204 rpi: temp=42.4 mcu_temp: temp=29.9 sd_pos=32474 sysload=0.12 cputime=14.649 memavail=1650116 print_time=338.317 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.8 pwm=0.376
Stats 328.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=126804 bytes_read=95810 bytes_retransmit=9 bytes_invalid=0 send_seq=4480 receive_seq=4480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=55.7 pwm=0.822 rpi: temp=42.8 mcu_temp: temp=30.3 sd_pos=33067 sysload=0.12 cputime=14.721 memavail=1650088 print_time=339.464 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.7 pwm=0.436
Stats 329.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=127551 bytes_read=96207 bytes_retransmit=9 bytes_invalid=0 send_seq=4502 receive_seq=4502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=55.7 pwm=0.423 rpi: temp=42.4 mcu_temp: temp=29.4 sd_pos=33427 sysload=0.12 cputime=14.785 memavail=1650016 print_time=340.234 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 330.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=128441 bytes_read=96639 bytes_retransmit=9 bytes_invalid=0 send_seq=4525 receive_seq=4525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=55.6 pwm=0.545 rpi: temp=43.8 mcu_temp: temp=29.5 sd_pos=33941 sysload=0.12 cputime=14.855 memavail=1650028 print_time=341.261 buffer_time=2.031 print_stall=0 extruder: target=215 temp=214.7 pwm=0.465
Stats 331.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=132336 bytes_read=97315 bytes_retransmit=9 bytes_invalid=0 send_seq=4600 receive_seq=4600 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=10 freq=71996562 heater_bed: target=55 temp=55.6 pwm=0.097 rpi: temp=42.8 mcu_temp: temp=30.0 sd_pos=35338 sysload=0.19 cputime=14.946 memavail=1650012 print_time=342.458 buffer_time=2.228 print_stall=0 extruder: target=215 temp=214.7 pwm=0.517
Stats 332.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=133637 bytes_read=97747 bytes_retransmit=9 bytes_invalid=0 send_seq=4629 receive_seq=4629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=55.6 pwm=0.094 rpi: temp=42.4 mcu_temp: temp=30.4 sd_pos=35576 sysload=0.19 cputime=15.009 memavail=1650268 print_time=343.641 buffer_time=2.411 print_stall=0 extruder: target=215 temp=214.7 pwm=0.517
Stats 333.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=134482 bytes_read=98189 bytes_retransmit=9 bytes_invalid=0 send_seq=4651 receive_seq=4651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=55.6 pwm=0.233 rpi: temp=42.4 mcu_temp: temp=30.2 sd_pos=35724 sysload=0.19 cputime=15.072 memavail=1649764 print_time=344.641 buffer_time=2.411 print_stall=0 extruder: target=215 temp=214.6 pwm=0.567
Stats 334.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=135422 bytes_read=98615 bytes_retransmit=9 bytes_invalid=0 send_seq=4676 receive_seq=4676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=55.5 pwm=0.165 rpi: temp=42.8 mcu_temp: temp=30.0 sd_pos=35873 sysload=0.19 cputime=15.133 memavail=1650016 print_time=345.779 buffer_time=2.548 print_stall=0 extruder: target=215 temp=214.8 pwm=0.463
Stats 335.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=136113 bytes_read=99007 bytes_retransmit=9 bytes_invalid=0 send_seq=4697 receive_seq=4697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996558 heater_bed: target=55 temp=55.5 pwm=0.494 rpi: temp=41.9 mcu_temp: temp=30.4 sd_pos=35933 sysload=0.19 cputime=15.192 memavail=1649780 print_time=346.386 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.7 pwm=0.527
Stats 336.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=137056 bytes_read=99454 bytes_retransmit=9 bytes_invalid=0 send_seq=4723 receive_seq=4723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=55.5 pwm=0.178 rpi: temp=42.4 mcu_temp: temp=30.6 sd_pos=36086 sysload=0.42 cputime=15.255 memavail=1649776 print_time=347.663 buffer_time=2.430 print_stall=0 extruder: target=215 temp=214.7 pwm=0.527
Stats 337.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=137723 bytes_read=99860 bytes_retransmit=9 bytes_invalid=0 send_seq=4744 receive_seq=4744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996556 heater_bed: target=55 temp=55.5 pwm=0.417 rpi: temp=42.8 mcu_temp: temp=30.0 sd_pos=36179 sysload=0.42 cputime=15.315 memavail=1649792 print_time=348.324 buffer_time=2.091 print_stall=0 extruder: target=215 temp=214.8 pwm=0.458
Stats 338.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=138709 bytes_read=100292 bytes_retransmit=9 bytes_invalid=0 send_seq=4770 receive_seq=4770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996556 heater_bed: target=55 temp=55.5 pwm=0.125 rpi: temp=43.3 mcu_temp: temp=30.1 sd_pos=36300 sysload=0.42 cputime=15.376 memavail=1649520 print_time=349.680 buffer_time=2.447 print_stall=0 extruder: target=215 temp=214.7 pwm=0.550
Stats 339.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=139428 bytes_read=100724 bytes_retransmit=9 bytes_invalid=0 send_seq=4793 receive_seq=4793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996556 heater_bed: target=55 temp=55.5 pwm=0.018 rpi: temp=42.8 mcu_temp: temp=30.3 sd_pos=36389 sysload=0.42 cputime=15.437 memavail=1649536 print_time=350.369 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.6 pwm=0.614
Stats 340.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=140429 bytes_read=101160 bytes_retransmit=9 bytes_invalid=0 send_seq=4820 receive_seq=4820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996555 heater_bed: target=55 temp=55.3 pwm=0.557 rpi: temp=43.3 mcu_temp: temp=30.0 sd_pos=36511 sysload=0.42 cputime=15.498 memavail=1649524 print_time=351.754 buffer_time=2.520 print_stall=0 extruder: target=215 temp=214.7 pwm=0.586
Stats 341.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=141106 bytes_read=101552 bytes_retransmit=9 bytes_invalid=0 send_seq=4841 receive_seq=4841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=55.4 pwm=0.057 rpi: temp=43.3 mcu_temp: temp=30.3 sd_pos=36604 sysload=0.46 cputime=15.558 memavail=1649504 print_time=352.461 buffer_time=2.225 print_stall=0 extruder: target=215 temp=214.7 pwm=0.501
Stats 342.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=142093 bytes_read=102004 bytes_retransmit=9 bytes_invalid=0 send_seq=4868 receive_seq=4868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=42.4 mcu_temp: temp=30.6 sd_pos=36725 sysload=0.46 cputime=15.599 memavail=1649840 print_time=353.817 buffer_time=2.581 print_stall=0 extruder: target=215 temp=214.7 pwm=0.501
Stats 343.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=142797 bytes_read=102435 bytes_retransmit=9 bytes_invalid=0 send_seq=4891 receive_seq=4891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996553 heater_bed: target=55 temp=55.2 pwm=0.285 rpi: temp=43.3 mcu_temp: temp=30.6 sd_pos=36813 sysload=0.46 cputime=15.662 memavail=1649600 print_time=354.499 buffer_time=2.263 print_stall=0 extruder: target=215 temp=214.6 pwm=0.611
Stats 344.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=143696 bytes_read=102847 bytes_retransmit=9 bytes_invalid=0 send_seq=4916 receive_seq=4916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=55.3 pwm=0.092 rpi: temp=42.4 mcu_temp: temp=30.2 sd_pos=36965 sysload=0.46 cputime=15.727 memavail=1649628 print_time=355.799 buffer_time=2.561 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 345.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=144416 bytes_read=103269 bytes_retransmit=9 bytes_invalid=0 send_seq=4937 receive_seq=4937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996553 heater_bed: target=55 temp=55.2 pwm=0.561 rpi: temp=43.3 mcu_temp: temp=30.6 sd_pos=37027 sysload=0.46 cputime=15.787 memavail=1649796 print_time=356.428 buffer_time=2.190 print_stall=0 extruder: target=215 temp=214.7 pwm=0.593
Stats 346.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=145395 bytes_read=103705 bytes_retransmit=9 bytes_invalid=0 send_seq=4964 receive_seq=4964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=55.2 pwm=0.200 rpi: temp=41.9 mcu_temp: temp=30.4 sd_pos=37177 sysload=0.51 cputime=15.852 memavail=1650064 print_time=357.630 buffer_time=2.391 print_stall=0 extruder: target=215 temp=214.7 pwm=0.598
Stats 347.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=146330 bytes_read=104122 bytes_retransmit=9 bytes_invalid=0 send_seq=4990 receive_seq=4990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996551 heater_bed: target=55 temp=55.2 pwm=0.066 rpi: temp=42.8 mcu_temp: temp=30.9 sd_pos=37326 sysload=0.51 cputime=15.910 memavail=1650296 print_time=358.707 buffer_time=2.468 print_stall=0 extruder: target=215 temp=214.8 pwm=0.597
Stats 348.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=147238 bytes_read=104579 bytes_retransmit=9 bytes_invalid=0 send_seq=5016 receive_seq=5016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996551 heater_bed: target=55 temp=55.2 pwm=0.214 rpi: temp=43.3 mcu_temp: temp=30.4 sd_pos=37480 sysload=0.51 cputime=15.973 memavail=1650372 print_time=359.611 buffer_time=2.371 print_stall=0 extruder: target=215 temp=214.9 pwm=0.472
Stats 349.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=148170 bytes_read=104999 bytes_retransmit=9 bytes_invalid=0 send_seq=5042 receive_seq=5042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996550 heater_bed: target=55 temp=55.2 pwm=0.235 rpi: temp=42.8 mcu_temp: temp=31.0 sd_pos=37669 sysload=0.51 cputime=16.034 memavail=1650416 print_time=360.340 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 350.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=149818 bytes_read=105451 bytes_retransmit=9 bytes_invalid=0 send_seq=5077 receive_seq=5077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=43.3 mcu_temp: temp=30.6 sd_pos=38248 sysload=0.51 cputime=16.097 memavail=1650420 print_time=361.259 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 351.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=150890 bytes_read=105886 bytes_retransmit=9 bytes_invalid=0 send_seq=5103 receive_seq=5103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996551 heater_bed: target=55 temp=55.1 pwm=0.200 rpi: temp=43.3 mcu_temp: temp=30.8 sd_pos=39267 sysload=0.47 cputime=16.177 memavail=1650436 print_time=362.536 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 352.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=151670 bytes_read=106280 bytes_retransmit=9 bytes_invalid=0 send_seq=5122 receive_seq=5122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996551 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=41.9 mcu_temp: temp=30.5 sd_pos=39933 sysload=0.47 cputime=16.243 memavail=1649804 print_time=363.313 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 353.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=152814 bytes_read=106707 bytes_retransmit=9 bytes_invalid=0 send_seq=5147 receive_seq=5147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=55.2 pwm=0.002 rpi: temp=42.8 mcu_temp: temp=31.0 sd_pos=40731 sysload=0.47 cputime=16.314 memavail=1650060 print_time=364.420 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 354.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=153834 bytes_read=107149 bytes_retransmit=9 bytes_invalid=0 send_seq=5172 receive_seq=5172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=43.3 mcu_temp: temp=30.9 sd_pos=41567 sysload=0.47 cputime=16.388 memavail=1650244 print_time=365.498 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.1 pwm=0.463
Stats 355.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=156252 bytes_read=107690 bytes_retransmit=9 bytes_invalid=0 send_seq=5220 receive_seq=5220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=43.3 mcu_temp: temp=31.2 sd_pos=42980 sysload=0.47 cputime=16.469 memavail=1649764 print_time=366.342 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 356.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=158774 bytes_read=108217 bytes_retransmit=9 bytes_invalid=0 send_seq=5268 receive_seq=5268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=43.8 mcu_temp: temp=31.3 sd_pos=44000 sysload=0.43 cputime=16.543 memavail=1649376 print_time=367.576 buffer_time=2.320 print_stall=0 extruder: target=215 temp=215.0 pwm=0.539
Stats 357.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=159668 bytes_read=108639 bytes_retransmit=9 bytes_invalid=0 send_seq=5289 receive_seq=5289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996566 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=42.8 mcu_temp: temp=31.5 sd_pos=44148 sysload=0.43 cputime=16.606 memavail=1649624 print_time=368.504 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.2 pwm=0.411
Stats 358.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=160648 bytes_read=109090 bytes_retransmit=9 bytes_invalid=0 send_seq=5316 receive_seq=5316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=43.8 mcu_temp: temp=30.9 sd_pos=44269 sysload=0.43 cputime=16.667 memavail=1649636 print_time=369.616 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.3 pwm=0.386
Stats 359.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=161596 bytes_read=109492 bytes_retransmit=9 bytes_invalid=0 send_seq=5339 receive_seq=5339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996563 heater_bed: target=55 temp=55.0 pwm=0.090 rpi: temp=43.3 mcu_temp: temp=31.0 sd_pos=44447 sysload=0.43 cputime=16.730 memavail=1649448 print_time=370.852 buffer_time=2.593 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 360.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=162309 bytes_read=109924 bytes_retransmit=9 bytes_invalid=0 send_seq=5362 receive_seq=5362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=54.9 pwm=0.481 rpi: temp=42.8 mcu_temp: temp=31.3 sd_pos=44539 sysload=0.43 cputime=16.765 memavail=1649680 print_time=371.505 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.2 pwm=0.426
Stats 361.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=163234 bytes_read=110355 bytes_retransmit=9 bytes_invalid=0 send_seq=5388 receive_seq=5388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996557 heater_bed: target=55 temp=55.0 pwm=0.148 rpi: temp=43.8 mcu_temp: temp=31.5 sd_pos=44660 sysload=0.39 cputime=16.827 memavail=1649700 print_time=372.869 buffer_time=2.609 print_stall=0 extruder: target=215 temp=214.9 pwm=0.609
Stats 362.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=163977 bytes_read=110752 bytes_retransmit=9 bytes_invalid=0 send_seq=5410 receive_seq=5410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=44.3 mcu_temp: temp=31.4 sd_pos=44750 sysload=0.39 cputime=16.888 memavail=1650472 print_time=373.573 buffer_time=2.312 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 363.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=164617 bytes_read=111194 bytes_retransmit=9 bytes_invalid=0 send_seq=5432 receive_seq=5432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=54.9 pwm=0.420 rpi: temp=43.3 mcu_temp: temp=31.4 sd_pos=44811 sysload=0.39 cputime=16.946 memavail=1650444 print_time=374.288 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.8 pwm=0.553
Stats 364.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=165862 bytes_read=111645 bytes_retransmit=9 bytes_invalid=0 send_seq=5462 receive_seq=5462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996561 heater_bed: target=55 temp=54.9 pwm=0.191 rpi: temp=44.8 mcu_temp: temp=31.5 sd_pos=44961 sysload=0.39 cputime=17.012 memavail=1650464 print_time=375.754 buffer_time=2.491 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 365.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=166582 bytes_read=112042 bytes_retransmit=9 bytes_invalid=0 send_seq=5484 receive_seq=5484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=54.9 pwm=0.016 rpi: temp=43.8 mcu_temp: temp=31.6 sd_pos=45021 sysload=0.39 cputime=17.072 memavail=1650508 print_time=376.471 buffer_time=2.207 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 366.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=167610 bytes_read=112515 bytes_retransmit=9 bytes_invalid=0 send_seq=5513 receive_seq=5513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996568 heater_bed: target=55 temp=54.8 pwm=0.518 rpi: temp=42.8 mcu_temp: temp=31.4 sd_pos=45171 sysload=0.36 cputime=17.136 memavail=1650272 print_time=377.951 buffer_time=2.687 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 367.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=168314 bytes_read=112921 bytes_retransmit=9 bytes_invalid=0 send_seq=5534 receive_seq=5534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996566 heater_bed: target=55 temp=54.7 pwm=0.592 rpi: temp=42.8 mcu_temp: temp=31.5 sd_pos=45233 sysload=0.36 cputime=17.196 memavail=1649760 print_time=378.665 buffer_time=2.400 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 368.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=168968 bytes_read=113328 bytes_retransmit=9 bytes_invalid=0 send_seq=5555 receive_seq=5555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996565 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=43.3 mcu_temp: temp=32.1 sd_pos=45293 sysload=0.36 cputime=17.255 memavail=1650324 print_time=379.386 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 369.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=169988 bytes_read=113775 bytes_retransmit=9 bytes_invalid=0 send_seq=5581 receive_seq=5581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=44.3 mcu_temp: temp=31.9 sd_pos=45446 sysload=0.36 cputime=17.315 memavail=1650588 print_time=380.803 buffer_time=2.537 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 370.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=170654 bytes_read=114176 bytes_retransmit=9 bytes_invalid=0 send_seq=5601 receive_seq=5601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=54.9 pwm=0.099 rpi: temp=43.8 mcu_temp: temp=31.6 sd_pos=45507 sysload=0.36 cputime=17.353 memavail=1650900 print_time=381.492 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 371.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=171615 bytes_read=114588 bytes_retransmit=9 bytes_invalid=0 send_seq=5626 receive_seq=5626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996564 heater_bed: target=55 temp=54.8 pwm=0.267 rpi: temp=43.3 mcu_temp: temp=32.1 sd_pos=45688 sysload=0.33 cputime=17.415 memavail=1651144 print_time=382.821 buffer_time=2.554 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 372.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=172310 bytes_read=115039 bytes_retransmit=9 bytes_invalid=0 send_seq=5650 receive_seq=5650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996562 heater_bed: target=55 temp=54.8 pwm=0.137 rpi: temp=43.8 mcu_temp: temp=31.8 sd_pos=45775 sysload=0.33 cputime=17.475 memavail=1651716 print_time=383.446 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 373.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=173233 bytes_read=115466 bytes_retransmit=9 bytes_invalid=0 send_seq=5675 receive_seq=5675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996560 heater_bed: target=55 temp=54.8 pwm=0.330 rpi: temp=43.3 mcu_temp: temp=31.8 sd_pos=45896 sysload=0.33 cputime=17.537 memavail=1651212 print_time=384.618 buffer_time=2.349 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 374.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=174098 bytes_read=115873 bytes_retransmit=9 bytes_invalid=0 send_seq=5699 receive_seq=5699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996558 heater_bed: target=55 temp=54.7 pwm=0.407 rpi: temp=43.8 mcu_temp: temp=32.3 sd_pos=46073 sysload=0.33 cputime=17.576 memavail=1651216 print_time=385.645 buffer_time=2.375 print_stall=0 extruder: target=215 temp=215.1 pwm=0.506
Stats 375.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=175051 bytes_read=116334 bytes_retransmit=9 bytes_invalid=0 send_seq=5725 receive_seq=5725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996555 heater_bed: target=55 temp=54.8 pwm=0.147 rpi: temp=43.3 mcu_temp: temp=32.0 sd_pos=46252 sysload=0.33 cputime=17.638 memavail=1651476 print_time=386.493 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.2 pwm=0.453
Stats 376.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=176706 bytes_read=116796 bytes_retransmit=9 bytes_invalid=0 send_seq=5760 receive_seq=5760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996555 heater_bed: target=55 temp=54.7 pwm=0.433 rpi: temp=44.8 mcu_temp: temp=31.9 sd_pos=46867 sysload=0.31 cputime=17.705 memavail=1651736 print_time=387.444 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.3 pwm=0.453
Stats 377.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=177579 bytes_read=117198 bytes_retransmit=9 bytes_invalid=0 send_seq=5783 receive_seq=5783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996553 heater_bed: target=55 temp=54.8 pwm=0.185 rpi: temp=43.8 mcu_temp: temp=32.1 sd_pos=47636 sysload=0.31 cputime=17.775 memavail=1651536 print_time=388.519 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.2 pwm=0.522
Stats 378.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=178406 bytes_read=117669 bytes_retransmit=9 bytes_invalid=0 send_seq=5808 receive_seq=5808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=54.8 pwm=0.177 rpi: temp=44.3 mcu_temp: temp=32.4 sd_pos=48273 sysload=0.31 cputime=17.847 memavail=1651308 print_time=389.324 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.1 pwm=0.515
Stats 379.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=179588 bytes_read=118091 bytes_retransmit=9 bytes_invalid=0 send_seq=5835 receive_seq=5835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=54.8 pwm=0.347 rpi: temp=43.8 mcu_temp: temp=31.7 sd_pos=49121 sysload=0.31 cputime=17.917 memavail=1651292 print_time=390.476 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.604
Stats 380.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=180381 bytes_read=118483 bytes_retransmit=9 bytes_invalid=0 send_seq=5856 receive_seq=5856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996550 heater_bed: target=55 temp=54.7 pwm=0.347 rpi: temp=43.8 mcu_temp: temp=32.4 sd_pos=49807 sysload=0.31 cputime=17.983 memavail=1651284 print_time=391.324 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.0 pwm=0.573
Stats 381.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=181963 bytes_read=118994 bytes_retransmit=9 bytes_invalid=0 send_seq=5892 receive_seq=5892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996548 heater_bed: target=55 temp=54.8 pwm=0.271 rpi: temp=44.3 mcu_temp: temp=33.5 sd_pos=50981 sysload=0.28 cputime=18.063 memavail=1650840 print_time=392.495 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 382.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=185128 bytes_read=119591 bytes_retransmit=9 bytes_invalid=0 send_seq=5954 receive_seq=5954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996547 heater_bed: target=55 temp=54.8 pwm=0.324 rpi: temp=43.3 mcu_temp: temp=32.2 sd_pos=52566 sysload=0.28 cputime=18.149 memavail=1650856 print_time=393.322 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.2 pwm=0.509
Stats 383.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=186633 bytes_read=120058 bytes_retransmit=9 bytes_invalid=0 send_seq=5987 receive_seq=5987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996550 heater_bed: target=55 temp=54.7 pwm=0.323 rpi: temp=44.3 mcu_temp: temp=32.7 sd_pos=52882 sysload=0.28 cputime=18.215 memavail=1650788 print_time=394.649 buffer_time=2.372 print_stall=0 extruder: target=215 temp=215.1 pwm=0.514
Stats 384.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=187593 bytes_read=120524 bytes_retransmit=9 bytes_invalid=0 send_seq=6014 receive_seq=6014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=54.7 pwm=0.333 rpi: temp=43.8 mcu_temp: temp=32.5 sd_pos=53035 sysload=0.28 cputime=18.279 memavail=1650784 print_time=395.715 buffer_time=2.437 print_stall=0 extruder: target=215 temp=215.2 pwm=0.437
Stats 385.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=188262 bytes_read=120921 bytes_retransmit=9 bytes_invalid=0 send_seq=6036 receive_seq=6036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996550 heater_bed: target=55 temp=54.7 pwm=0.517 rpi: temp=43.8 mcu_temp: temp=32.3 sd_pos=53098 sysload=0.28 cputime=18.340 memavail=1651360 print_time=396.298 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.1 pwm=0.501
Stats 386.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=189229 bytes_read=121348 bytes_retransmit=9 bytes_invalid=0 send_seq=6061 receive_seq=6061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996551 heater_bed: target=55 temp=54.7 pwm=0.229 rpi: temp=44.3 mcu_temp: temp=32.6 sd_pos=53285 sysload=0.26 cputime=18.399 memavail=1651596 print_time=397.577 buffer_time=2.298 print_stall=0 extruder: target=215 temp=215.2 pwm=0.501
Stats 387.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=190153 bytes_read=121784 bytes_retransmit=9 bytes_invalid=0 send_seq=6085 receive_seq=6085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=54.8 pwm=0.015 rpi: temp=44.3 mcu_temp: temp=32.8 sd_pos=53471 sysload=0.26 cputime=18.457 memavail=1651360 print_time=398.966 buffer_time=2.686 print_stall=0 extruder: target=215 temp=214.8 pwm=0.634
Stats 388.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=190896 bytes_read=122196 bytes_retransmit=9 bytes_invalid=0 send_seq=6107 receive_seq=6107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996554 heater_bed: target=55 temp=54.8 pwm=0.147 rpi: temp=43.8 mcu_temp: temp=32.8 sd_pos=53532 sysload=0.26 cputime=18.517 memavail=1651352 print_time=399.673 buffer_time=2.392 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 389.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=191465 bytes_read=122583 bytes_retransmit=9 bytes_invalid=0 send_seq=6124 receive_seq=6124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996553 heater_bed: target=55 temp=54.8 pwm=0.024 rpi: temp=43.8 mcu_temp: temp=33.4 sd_pos=53596 sysload=0.26 cputime=18.571 memavail=1651108 print_time=400.405 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 390.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=192459 bytes_read=123034 bytes_retransmit=9 bytes_invalid=0 send_seq=6151 receive_seq=6151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=54.8 pwm=0.346 rpi: temp=43.8 mcu_temp: temp=32.7 sd_pos=53753 sysload=0.26 cputime=18.630 memavail=1651404 print_time=401.908 buffer_time=2.627 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 391.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=193160 bytes_read=123431 bytes_retransmit=9 bytes_invalid=0 send_seq=6173 receive_seq=6173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996552 heater_bed: target=55 temp=54.8 pwm=0.121 rpi: temp=45.3 mcu_temp: temp=33.9 sd_pos=53815 sysload=0.24 cputime=18.686 memavail=1651432 print_time=402.672 buffer_time=2.389 print_stall=0 extruder: target=215 temp=215.1 pwm=0.473
Stats 392.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=193759 bytes_read=123823 bytes_retransmit=9 bytes_invalid=0 send_seq=6191 receive_seq=6191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996551 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=43.3 mcu_temp: temp=33.4 sd_pos=53909 sysload=0.24 cputime=18.719 memavail=1650912 print_time=403.455 buffer_time=2.172 print_stall=0 extruder: target=215 temp=214.7 pwm=0.611
Stats 393.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=194755 bytes_read=124294 bytes_retransmit=9 bytes_invalid=0 send_seq=6219 receive_seq=6219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996549 heater_bed: target=55 temp=54.7 pwm=0.597 rpi: temp=43.8 mcu_temp: temp=33.3 sd_pos=54032 sysload=0.24 cputime=18.780 memavail=1651172 print_time=404.988 buffer_time=2.705 print_stall=0 extruder: target=215 temp=214.9 pwm=0.478
Stats 394.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=195484 bytes_read=124691 bytes_retransmit=9 bytes_invalid=0 send_seq=6241 receive_seq=6241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996548 heater_bed: target=55 temp=54.7 pwm=0.260 rpi: temp=44.3 mcu_temp: temp=33.6 sd_pos=54122 sysload=0.24 cputime=18.840 memavail=1651172 print_time=405.762 buffer_time=2.478 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 395.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=196129 bytes_read=125088 bytes_retransmit=9 bytes_invalid=0 send_seq=6260 receive_seq=6260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996549 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=44.3 mcu_temp: temp=32.9 sd_pos=54184 sysload=0.24 cputime=18.894 memavail=1650676 print_time=406.531 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.3 pwm=0.250
Stats 396.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=196790 bytes_read=125519 bytes_retransmit=9 bytes_invalid=0 send_seq=6283 receive_seq=6283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996547 heater_bed: target=55 temp=54.7 pwm=0.392 rpi: temp=43.8 mcu_temp: temp=33.6 sd_pos=54246 sysload=0.22 cputime=18.953 memavail=1650640 print_time=407.294 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 397.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=197808 bytes_read=125936 bytes_retransmit=9 bytes_invalid=0 send_seq=6309 receive_seq=6309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=44.3 mcu_temp: temp=33.2 sd_pos=54404 sysload=0.22 cputime=19.011 memavail=1650624 print_time=408.796 buffer_time=2.509 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 398.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=198467 bytes_read=126358 bytes_retransmit=9 bytes_invalid=0 send_seq=6330 receive_seq=6330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996543 heater_bed: target=55 temp=54.7 pwm=0.284 rpi: temp=44.8 mcu_temp: temp=33.2 sd_pos=54468 sysload=0.22 cputime=19.069 memavail=1650616 print_time=409.528 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 399.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=199432 bytes_read=126799 bytes_retransmit=9 bytes_invalid=0 send_seq=6355 receive_seq=6355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996543 heater_bed: target=55 temp=54.8 pwm=0.231 rpi: temp=43.3 mcu_temp: temp=33.4 sd_pos=54656 sysload=0.22 cputime=19.127 memavail=1650616 print_time=410.960 buffer_time=2.672 print_stall=0 extruder: target=215 temp=215.2 pwm=0.445
Stats 400.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=200121 bytes_read=127196 bytes_retransmit=9 bytes_invalid=0 send_seq=6377 receive_seq=6377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996544 heater_bed: target=55 temp=54.6 pwm=0.609 rpi: temp=43.8 mcu_temp: temp=33.2 sd_pos=54749 sysload=0.22 cputime=19.184 memavail=1650876 print_time=411.636 buffer_time=2.347 print_stall=0 extruder: target=215 temp=215.3 pwm=0.364
Stats 401.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=201039 bytes_read=127623 bytes_retransmit=9 bytes_invalid=0 send_seq=6402 receive_seq=6402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996547 heater_bed: target=55 temp=54.7 pwm=0.283 rpi: temp=45.8 mcu_temp: temp=33.6 sd_pos=54907 sysload=0.20 cputime=19.246 memavail=1650868 print_time=412.893 buffer_time=2.603 print_stall=0 extruder: target=215 temp=215.0 pwm=0.576
Stats 402.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=201738 bytes_read=128049 bytes_retransmit=9 bytes_invalid=0 send_seq=6424 receive_seq=6424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=55 temp=54.8 pwm=0.115 rpi: temp=43.3 mcu_temp: temp=33.4 sd_pos=54997 sysload=0.20 cputime=19.282 memavail=1651308 print_time=413.482 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.9 pwm=0.606
Stats 403.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=202628 bytes_read=128476 bytes_retransmit=9 bytes_invalid=0 send_seq=6449 receive_seq=6449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996543 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=33.3 sd_pos=55149 sysload=0.20 cputime=19.340 memavail=1651072 print_time=414.570 buffer_time=2.276 print_stall=0 extruder: target=215 temp=215.2 pwm=0.389
Stats 404.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=203461 bytes_read=128898 bytes_retransmit=9 bytes_invalid=0 send_seq=6473 receive_seq=6473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996544 heater_bed: target=55 temp=54.8 pwm=0.073 rpi: temp=45.3 mcu_temp: temp=33.6 sd_pos=55363 sysload=0.20 cputime=19.400 memavail=1651332 print_time=415.423 buffer_time=2.128 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 405.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=205095 bytes_read=129404 bytes_retransmit=9 bytes_invalid=0 send_seq=6511 receive_seq=6511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996544 heater_bed: target=55 temp=54.7 pwm=0.372 rpi: temp=44.3 mcu_temp: temp=33.8 sd_pos=55890 sysload=0.20 cputime=19.463 memavail=1651324 print_time=416.317 buffer_time=2.021 print_stall=0 extruder: target=215 temp=214.9 pwm=0.596
Stats 406.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=205981 bytes_read=129811 bytes_retransmit=9 bytes_invalid=0 send_seq=6535 receive_seq=6535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=33.6 sd_pos=56386 sysload=0.18 cputime=19.530 memavail=1651080 print_time=417.445 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.2 pwm=0.455
Stats 407.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=206907 bytes_read=130243 bytes_retransmit=9 bytes_invalid=0 send_seq=6561 receive_seq=6561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996545 heater_bed: target=55 temp=54.7 pwm=0.530 rpi: temp=43.8 mcu_temp: temp=33.9 sd_pos=56878 sysload=0.18 cputime=19.598 memavail=1650760 print_time=418.573 buffer_time=2.277 print_stall=0 extruder: target=215 temp=215.1 pwm=0.510
Stats 408.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=207930 bytes_read=130693 bytes_retransmit=9 bytes_invalid=0 send_seq=6587 receive_seq=6587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996545 heater_bed: target=55 temp=54.8 pwm=0.264 rpi: temp=44.8 mcu_temp: temp=33.3 sd_pos=57325 sysload=0.18 cputime=19.660 memavail=1650780 print_time=419.492 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.0 pwm=0.521
Stats 409.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=208738 bytes_read=131079 bytes_retransmit=9 bytes_invalid=0 send_seq=6609 receive_seq=6609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=55 temp=54.6 pwm=0.735 rpi: temp=43.8 mcu_temp: temp=33.6 sd_pos=57730 sysload=0.18 cputime=19.721 memavail=1650936 print_time=420.455 buffer_time=2.157 print_stall=0 extruder: target=215 temp=215.0 pwm=0.535
Stats 410.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=210467 bytes_read=131560 bytes_retransmit=9 bytes_invalid=0 send_seq=6647 receive_seq=6647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996544 heater_bed: target=55 temp=54.8 pwm=0.018 rpi: temp=43.3 mcu_temp: temp=33.7 sd_pos=58501 sysload=0.18 cputime=19.796 memavail=1650972 print_time=421.665 buffer_time=2.367 print_stall=0 extruder: target=215 temp=215.0 pwm=0.557
Stats 411.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=213494 bytes_read=132167 bytes_retransmit=9 bytes_invalid=0 send_seq=6707 receive_seq=6707 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=10 freq=71996545 heater_bed: target=55 temp=54.6 pwm=0.622 rpi: temp=45.3 mcu_temp: temp=33.8 sd_pos=59431 sysload=0.17 cputime=19.876 memavail=1650460 print_time=422.504 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.4 pwm=0.334
Stats 412.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=215058 bytes_read=132629 bytes_retransmit=9 bytes_invalid=0 send_seq=6742 receive_seq=6742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996543 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=33.7 sd_pos=59737 sysload=0.17 cputime=19.939 memavail=1650712 print_time=423.630 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 413.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=216011 bytes_read=133076 bytes_retransmit=9 bytes_invalid=0 send_seq=6768 receive_seq=6768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996542 heater_bed: target=55 temp=54.7 pwm=0.413 rpi: temp=44.3 mcu_temp: temp=33.1 sd_pos=59895 sysload=0.17 cputime=19.999 memavail=1650720 print_time=424.630 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.0 pwm=0.543
Stats 414.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=216925 bytes_read=133517 bytes_retransmit=9 bytes_invalid=0 send_seq=6793 receive_seq=6793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996542 heater_bed: target=55 temp=54.7 pwm=0.448 rpi: temp=43.8 mcu_temp: temp=33.8 sd_pos=60048 sysload=0.17 cputime=20.059 memavail=1650720 print_time=425.814 buffer_time=2.514 print_stall=0 extruder: target=215 temp=214.9 pwm=0.615
Stats 415.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=217579 bytes_read=133909 bytes_retransmit=9 bytes_invalid=0 send_seq=6814 receive_seq=6814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=55 temp=54.8 pwm=0.392 rpi: temp=44.8 mcu_temp: temp=34.2 sd_pos=60112 sysload=0.17 cputime=20.115 memavail=1650712 print_time=426.458 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.1 pwm=0.374
Stats 416.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=218532 bytes_read=134341 bytes_retransmit=9 bytes_invalid=0 send_seq=6840 receive_seq=6840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996541 heater_bed: target=55 temp=54.8 pwm=0.252 rpi: temp=44.3 mcu_temp: temp=33.8 sd_pos=60268 sysload=0.16 cputime=20.174 memavail=1650480 print_time=427.842 buffer_time=2.540 print_stall=0 extruder: target=215 temp=214.8 pwm=0.591
Stats 417.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=219201 bytes_read=134772 bytes_retransmit=9 bytes_invalid=0 send_seq=6863 receive_seq=6863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996539 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.0 sd_pos=60359 sysload=0.16 cputime=20.228 memavail=1650536 print_time=428.566 buffer_time=2.264 print_stall=0 extruder: target=215 temp=214.7 pwm=0.599
Stats 418.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=219831 bytes_read=135179 bytes_retransmit=9 bytes_invalid=0 send_seq=6884 receive_seq=6884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996538 heater_bed: target=55 temp=54.8 pwm=0.283 rpi: temp=44.3 mcu_temp: temp=33.9 sd_pos=60422 sysload=0.16 cputime=20.282 memavail=1649864 print_time=429.313 buffer_time=2.010 print_stall=0 extruder: target=215 temp=214.8 pwm=0.575
Stats 419.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=220808 bytes_read=135621 bytes_retransmit=9 bytes_invalid=0 send_seq=6909 receive_seq=6909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996536 heater_bed: target=55 temp=54.8 pwm=0.456 rpi: temp=44.8 mcu_temp: temp=33.5 sd_pos=60546 sysload=0.16 cputime=20.340 memavail=1650220 print_time=430.851 buffer_time=2.544 print_stall=0 extruder: target=215 temp=214.7 pwm=0.672
Exiting SD card print (position 60576)
action:cancel
Stats 420.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=221476 bytes_read=136037 bytes_retransmit=9 bytes_invalid=0 send_seq=6932 receive_seq=6932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=43.8 mcu_temp: temp=34.8  sysload=0.16 cputime=20.416 memavail=1649976 print_time=430.851 buffer_time=1.543 print_stall=0 extruder: target=0 temp=215.0 pwm=0.000
Stats 421.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=222045 bytes_read=136409 bytes_retransmit=9 bytes_invalid=0 send_seq=6949 receive_seq=6949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.3  sysload=0.14 cputime=20.464 memavail=1649944 print_time=431.648 buffer_time=1.339 print_stall=0 extruder: target=0 temp=214.7 pwm=0.000
Stats 422.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=222182 bytes_read=136776 bytes_retransmit=9 bytes_invalid=0 send_seq=6959 receive_seq=6959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996534 heater_bed: target=0 temp=54.8 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.4  sysload=0.14 cputime=20.510 memavail=1649884 print_time=431.648 buffer_time=0.339 print_stall=0 extruder: target=0 temp=214.8 pwm=0.000
Stats 423.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=222517 bytes_read=137162 bytes_retransmit=9 bytes_invalid=0 send_seq=6973 receive_seq=6973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=33.8  sysload=0.14 cputime=20.563 memavail=1650108 print_time=433.746 buffer_time=1.436 print_stall=1 extruder: target=0 temp=214.8 pwm=0.000
Stats 424.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=222904 bytes_read=137524 bytes_retransmit=9 bytes_invalid=0 send_seq=6988 receive_seq=6988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.4  sysload=0.14 cputime=20.616 memavail=1650144 print_time=433.942 buffer_time=0.631 print_stall=2 extruder: target=0 temp=214.5 pwm=0.000
Stats 425.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=223306 bytes_read=137911 bytes_retransmit=9 bytes_invalid=0 send_seq=7002 receive_seq=7002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996534 heater_bed: target=0 temp=54.7 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.5  sysload=0.14 cputime=20.669 memavail=1649892 print_time=434.312 buffer_time=0.001 print_stall=3 extruder: target=0 temp=214.5 pwm=0.000
Stats 426.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=223907 bytes_read=138323 bytes_retransmit=9 bytes_invalid=0 send_seq=7022 receive_seq=7022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996538 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=33.8  sysload=0.13 cputime=20.729 memavail=1649980 print_time=435.642 buffer_time=0.331 print_stall=4 extruder: target=0 temp=214.2 pwm=0.000
Stats 427.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=224275 bytes_read=138685 bytes_retransmit=9 bytes_invalid=0 send_seq=7037 receive_seq=7037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996537 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=44.3 mcu_temp: temp=34.4  sysload=0.13 cputime=20.776 memavail=1650160 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=213.4 pwm=0.000
Stats 428.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=224492 bytes_read=139077 bytes_retransmit=9 bytes_invalid=0 send_seq=7049 receive_seq=7049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.3  sysload=0.13 cputime=20.824 memavail=1650364 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=213.1 pwm=0.000
Stats 429.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=224629 bytes_read=139428 bytes_retransmit=9 bytes_invalid=0 send_seq=7059 receive_seq=7059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996534 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.1  sysload=0.13 cputime=20.870 memavail=1650364 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=212.5 pwm=0.000
Stats 430.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=224780 bytes_read=139765 bytes_retransmit=9 bytes_invalid=0 send_seq=7069 receive_seq=7069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=34.7  sysload=0.13 cputime=20.915 memavail=1650412 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=211.9 pwm=0.000
Stats 431.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=224936 bytes_read=140137 bytes_retransmit=9 bytes_invalid=0 send_seq=7080 receive_seq=7080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996533 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.4  sysload=0.12 cputime=20.963 memavail=1650112 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=211.1 pwm=0.000
Stats 432.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=225097 bytes_read=140498 bytes_retransmit=9 bytes_invalid=0 send_seq=7092 receive_seq=7092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996532 heater_bed: target=0 temp=54.2 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=34.7  sysload=0.12 cputime=21.010 memavail=1649412 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=210.4 pwm=0.000
Stats 433.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=225253 bytes_read=140855 bytes_retransmit=9 bytes_invalid=0 send_seq=7103 receive_seq=7103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996531 heater_bed: target=0 temp=54.2 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.4  sysload=0.12 cputime=21.056 memavail=1649540 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=209.3 pwm=0.000
Stats 434.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=225408 bytes_read=141222 bytes_retransmit=9 bytes_invalid=0 send_seq=7113 receive_seq=7113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996530 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.1  sysload=0.12 cputime=21.102 memavail=1649212 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=208.5 pwm=0.000
Stats 435.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=225559 bytes_read=141573 bytes_retransmit=9 bytes_invalid=0 send_seq=7123 receive_seq=7123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=54.0 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.6  sysload=0.12 cputime=21.147 memavail=1649356 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=207.3 pwm=0.000
Stats 436.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=225710 bytes_read=141910 bytes_retransmit=9 bytes_invalid=0 send_seq=7133 receive_seq=7133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996527 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.4  sysload=0.11 cputime=21.192 memavail=1649564 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=206.5 pwm=0.000
Stats 437.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=225861 bytes_read=142277 bytes_retransmit=9 bytes_invalid=0 send_seq=7143 receive_seq=7143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.8  sysload=0.11 cputime=21.236 memavail=1649612 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=205.4 pwm=0.000
Stats 438.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=226012 bytes_read=142643 bytes_retransmit=9 bytes_invalid=0 send_seq=7153 receive_seq=7153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.7  sysload=0.11 cputime=21.282 memavail=1649548 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=204.6 pwm=0.000
Stats 439.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=226163 bytes_read=142980 bytes_retransmit=9 bytes_invalid=0 send_seq=7163 receive_seq=7163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=44.8 mcu_temp: temp=34.5  sysload=0.11 cputime=21.326 memavail=1649624 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=203.4 pwm=0.000
Stats 440.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=226314 bytes_read=143347 bytes_retransmit=9 bytes_invalid=0 send_seq=7173 receive_seq=7173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.3  sysload=0.11 cputime=21.373 memavail=1649624 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=202.4 pwm=0.000
Stats 441.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=226465 bytes_read=143698 bytes_retransmit=9 bytes_invalid=0 send_seq=7183 receive_seq=7183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.6  sysload=0.10 cputime=21.417 memavail=1649396 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=201.4 pwm=0.000
Stats 442.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=226616 bytes_read=144035 bytes_retransmit=9 bytes_invalid=0 send_seq=7193 receive_seq=7193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.9  sysload=0.10 cputime=21.461 memavail=1649244 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=200.4 pwm=0.000
Stats 443.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=226767 bytes_read=144417 bytes_retransmit=9 bytes_invalid=0 send_seq=7203 receive_seq=7203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=53.4 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.6  sysload=0.10 cputime=21.510 memavail=1649192 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=199.3 pwm=0.000
Stats 444.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=226946 bytes_read=144778 bytes_retransmit=9 bytes_invalid=0 send_seq=7215 receive_seq=7215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=53.3 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.6  sysload=0.10 cputime=21.556 memavail=1649576 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=198.0 pwm=0.000
Stats 445.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=227107 bytes_read=145125 bytes_retransmit=9 bytes_invalid=0 send_seq=7227 receive_seq=7227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.6  sysload=0.10 cputime=21.601 memavail=1649332 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=197.0 pwm=0.000
Stats 446.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=227268 bytes_read=145502 bytes_retransmit=9 bytes_invalid=0 send_seq=7239 receive_seq=7239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=0 temp=53.1 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.5  sysload=0.09 cputime=21.648 memavail=1649272 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=196.1 pwm=0.000
Stats 447.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=227424 bytes_read=145858 bytes_retransmit=9 bytes_invalid=0 send_seq=7250 receive_seq=7250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=0 temp=52.9 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.5  sysload=0.09 cputime=21.695 memavail=1649340 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=194.4 pwm=0.000
Stats 448.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=227585 bytes_read=146220 bytes_retransmit=9 bytes_invalid=0 send_seq=7262 receive_seq=7262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=0 temp=52.8 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.7  sysload=0.09 cputime=21.741 memavail=1649276 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=193.7 pwm=0.000
Stats 449.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=227755 bytes_read=146592 bytes_retransmit=9 bytes_invalid=0 send_seq=7273 receive_seq=7273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=0 temp=52.5 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.7  sysload=0.09 cputime=21.792 memavail=1649284 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=192.8 pwm=0.000
Stats 450.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=227906 bytes_read=146943 bytes_retransmit=9 bytes_invalid=0 send_seq=7283 receive_seq=7283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=0 temp=52.7 pwm=0.000 rpi: temp=45.8 mcu_temp: temp=34.7  sysload=0.09 cputime=21.835 memavail=1649036 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=191.1 pwm=0.000
Stats 451.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=228071 bytes_read=147280 bytes_retransmit=9 bytes_invalid=0 send_seq=7293 receive_seq=7293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=0 temp=52.4 pwm=0.000 rpi: temp=45.3 mcu_temp: temp=34.8  sysload=0.17 cputime=21.882 memavail=1649296 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=190.4 pwm=0.000
Stats 452.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=228222 bytes_read=147647 bytes_retransmit=9 bytes_invalid=0 send_seq=7303 receive_seq=7303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=0 temp=52.4 pwm=0.000 rpi: temp=46.7 mcu_temp: temp=34.7  sysload=0.17 cputime=21.928 memavail=1648984 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=189.4 pwm=0.000
Stats 453.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=228377 bytes_read=148013 bytes_retransmit=9 bytes_invalid=0 send_seq=7313 receive_seq=7313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.7  sysload=0.17 cputime=21.975 memavail=1649240 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=188.0 pwm=0.000
Stats 454.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=228538 bytes_read=148360 bytes_retransmit=9 bytes_invalid=0 send_seq=7325 receive_seq=7325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.8  sysload=0.17 cputime=22.021 memavail=1649240 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=187.1 pwm=0.000
Stats 455.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=228699 bytes_read=148737 bytes_retransmit=9 bytes_invalid=0 send_seq=7337 receive_seq=7337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=47.2 mcu_temp: temp=35.0  sysload=0.17 cputime=22.066 memavail=1649236 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=185.9 pwm=0.000
Stats 456.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=228860 bytes_read=149098 bytes_retransmit=9 bytes_invalid=0 send_seq=7349 receive_seq=7349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=46.7 mcu_temp: temp=34.6  sysload=0.15 cputime=22.114 memavail=1649040 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=184.7 pwm=0.000
Stats 457.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=229016 bytes_read=149440 bytes_retransmit=9 bytes_invalid=0 send_seq=7360 receive_seq=7360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=46.3 mcu_temp: temp=34.6  sysload=0.15 cputime=22.148 memavail=1643520 print_time=435.838 buffer_time=0.000 print_stall=4 extruder: target=0 temp=183.7 pwm=0.000
Starting SD card print (position 0)
Stats 458.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000061 bytes_write=229602 bytes_read=149877 bytes_retransmit=9 bytes_invalid=0 send_seq=7381 receive_seq=7381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=52.0 pwm=1.000 rpi: temp=47.2 mcu_temp: temp=34.3 sd_pos=860 sysload=0.15 cputime=22.196 memavail=1648372 print_time=466.645 buffer_time=0.000 print_stall=4 extruder: target=220 temp=182.7 pwm=1.000
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 220.000
Stats 459.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000061 bytes_write=229777 bytes_read=150238 bytes_retransmit=9 bytes_invalid=0 send_seq=7393 receive_seq=7393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=60 temp=51.8 pwm=1.000 rpi: temp=46.3 mcu_temp: temp=34.6 sd_pos=860 sysload=0.15 cputime=22.230 memavail=1648688 print_time=467.647 buffer_time=0.000 print_stall=4 extruder: target=220 temp=181.5 pwm=1.000
Stats 460.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000061 bytes_write=229952 bytes_read=150585 bytes_retransmit=9 bytes_invalid=0 send_seq=7405 receive_seq=7405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=60 temp=51.8 pwm=1.000 rpi: temp=45.8 mcu_temp: temp=34.3 sd_pos=860 sysload=0.15 cputime=22.277 memavail=1648376 print_time=468.647 buffer_time=0.000 print_stall=4 extruder: target=220 temp=180.7 pwm=1.000
Stats 461.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000061 bytes_write=230127 bytes_read=150962 bytes_retransmit=9 bytes_invalid=0 send_seq=7417 receive_seq=7417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=60 temp=51.8 pwm=1.000 rpi: temp=46.7 mcu_temp: temp=34.3 sd_pos=860 sysload=0.14 cputime=22.328 memavail=1648940 print_time=469.648 buffer_time=0.000 print_stall=4 extruder: target=220 temp=180.0 pwm=1.000
Stats 462.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000061 bytes_write=230334 bytes_read=151333 bytes_retransmit=9 bytes_invalid=0 send_seq=7431 receive_seq=7431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=60 temp=51.9 pwm=1.000 rpi: temp=47.2 mcu_temp: temp=33.9 sd_pos=860 sysload=0.14 cputime=22.378 memavail=1648840 print_time=470.648 buffer_time=0.000 print_stall=4 extruder: target=220 temp=179.3 pwm=1.000
Stats 463.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=230503 bytes_read=151685 bytes_retransmit=9 bytes_invalid=0 send_seq=7441 receive_seq=7441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=52.0 pwm=1.000 rpi: temp=46.7 mcu_temp: temp=34.4 sd_pos=860 sysload=0.14 cputime=22.428 memavail=1648816 print_time=471.649 buffer_time=0.000 print_stall=4 extruder: target=220 temp=179.0 pwm=1.000
Stats 464.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=230654 bytes_read=152052 bytes_retransmit=9 bytes_invalid=0 send_seq=7451 receive_seq=7451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=52.2 pwm=1.000 rpi: temp=47.2 mcu_temp: temp=34.6 sd_pos=860 sysload=0.14 cputime=22.477 memavail=1649068 print_time=472.650 buffer_time=0.000 print_stall=4 extruder: target=220 temp=178.7 pwm=1.000
Stats 465.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=230805 bytes_read=152403 bytes_retransmit=9 bytes_invalid=0 send_seq=7461 receive_seq=7461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=52.4 pwm=1.000 rpi: temp=46.7 mcu_temp: temp=34.1 sd_pos=860 sysload=0.14 cputime=22.527 memavail=1649252 print_time=473.651 buffer_time=0.000 print_stall=4 extruder: target=220 temp=178.8 pwm=1.000
Stats 466.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=230983 bytes_read=152745 bytes_retransmit=9 bytes_invalid=0 send_seq=7472 receive_seq=7472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=52.6 pwm=1.000 rpi: temp=46.3 mcu_temp: temp=34.3 sd_pos=860 sysload=0.21 cputime=22.577 memavail=1649452 print_time=474.651 buffer_time=0.000 print_stall=4 extruder: target=220 temp=178.9 pwm=1.000
Stats 467.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=231158 bytes_read=153118 bytes_retransmit=9 bytes_invalid=0 send_seq=7484 receive_seq=7484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=53.0 pwm=1.000 rpi: temp=47.7 mcu_temp: temp=34.3 sd_pos=860 sysload=0.21 cputime=22.628 memavail=1649980 print_time=475.652 buffer_time=0.000 print_stall=4 extruder: target=220 temp=179.3 pwm=1.000
Stats 468.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000027 bytes_write=231338 bytes_read=153483 bytes_retransmit=9 bytes_invalid=0 send_seq=7496 receive_seq=7496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=53.6 pwm=0.000 rpi: temp=47.2 mcu_temp: temp=34.7 sd_pos=860 sysload=0.21 cputime=22.677 memavail=1649524 print_time=476.652 buffer_time=0.000 print_stall=4 extruder: target=220 temp=179.9 pwm=1.000
Stats 469.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000027 bytes_write=231555 bytes_read=153825 bytes_retransmit=9 bytes_invalid=0 send_seq=7509 receive_seq=7509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=53.6 pwm=1.000 rpi: temp=46.7 mcu_temp: temp=34.8 sd_pos=860 sysload=0.21 cputime=22.726 memavail=1649524 print_time=477.653 buffer_time=0.000 print_stall=4 extruder: target=220 temp=180.5 pwm=1.000
Stats 470.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000027 bytes_write=231755 bytes_read=154190 bytes_retransmit=9 bytes_invalid=0 send_seq=7521 receive_seq=7521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=53.8 pwm=1.000 rpi: temp=47.2 mcu_temp: temp=34.5 sd_pos=860 sysload=0.21 cputime=22.777 memavail=1649208 print_time=478.654 buffer_time=0.000 print_stall=4 extruder: target=220 temp=181.1 pwm=1.000
Stats 471.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000027 bytes_write=231906 bytes_read=154536 bytes_retransmit=9 bytes_invalid=0 send_seq=7531 receive_seq=7531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=53.9 pwm=1.000 rpi: temp=47.7 mcu_temp: temp=34.7 sd_pos=860 sysload=0.19 cputime=22.826 memavail=1649292 print_time=479.654 buffer_time=0.000 print_stall=4 extruder: target=220 temp=182.3 pwm=1.000
Stats 472.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000027 bytes_write=232076 bytes_read=154878 bytes_retransmit=9 bytes_invalid=0 send_seq=7542 receive_seq=7542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=60 temp=54.0 pwm=1.000 rpi: temp=47.7 mcu_temp: temp=35.0 sd_pos=860 sysload=0.19 cputime=22.858 memavail=1649588 print_time=480.654 buffer_time=0.000 print_stall=4 extruder: target=220 temp=183.2 pwm=1.000
Stats 473.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=232267 bytes_read=155275 bytes_retransmit=9 bytes_invalid=0 send_seq=7555 receive_seq=7555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=54.1 pwm=1.000 rpi: temp=46.7 mcu_temp: temp=34.7 sd_pos=860 sysload=0.19 cputime=22.908 memavail=1649336 print_time=481.655 buffer_time=0.000 print_stall=4 extruder: target=220 temp=184.1 pwm=1.000
Stats 474.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=232501 bytes_read=155651 bytes_retransmit=9 bytes_invalid=0 send_seq=7570 receive_seq=7570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=54.5 pwm=0.771 rpi: temp=47.7 mcu_temp: temp=34.5 sd_pos=860 sysload=0.19 cputime=22.960 memavail=1649284 print_time=482.655 buffer_time=0.000 print_stall=4 extruder: target=220 temp=185.6 pwm=1.000
Stats 475.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=232719 bytes_read=156008 bytes_retransmit=9 bytes_invalid=0 send_seq=7584 receive_seq=7584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=54.8 pwm=0.472 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=860 sysload=0.19 cputime=23.008 memavail=1649220 print_time=483.656 buffer_time=0.000 print_stall=4 extruder: target=220 temp=186.7 pwm=1.000
Stats 476.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=232970 bytes_read=156400 bytes_retransmit=9 bytes_invalid=0 send_seq=7599 receive_seq=7599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=60 temp=54.8 pwm=0.997 rpi: temp=47.7 mcu_temp: temp=34.7 sd_pos=860 sysload=0.18 cputime=23.058 memavail=1649344 print_time=484.656 buffer_time=0.000 print_stall=4 extruder: target=220 temp=187.8 pwm=1.000
Stats 477.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=233135 bytes_read=156751 bytes_retransmit=9 bytes_invalid=0 send_seq=7609 receive_seq=7609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=60 temp=54.8 pwm=0.997 rpi: temp=47.7 mcu_temp: temp=34.3 sd_pos=860 sysload=0.18 cputime=23.109 memavail=1649276 print_time=485.656 buffer_time=0.000 print_stall=4 extruder: target=220 temp=189.5 pwm=1.000
Stats 478.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=233326 bytes_read=157118 bytes_retransmit=9 bytes_invalid=0 send_seq=7622 receive_seq=7622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=55.1 pwm=0.932 rpi: temp=47.7 mcu_temp: temp=34.4 sd_pos=860 sysload=0.18 cputime=23.156 memavail=1648984 print_time=486.657 buffer_time=0.000 print_stall=4 extruder: target=220 temp=190.6 pwm=1.000
Stats 479.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=233546 bytes_read=157500 bytes_retransmit=9 bytes_invalid=0 send_seq=7635 receive_seq=7635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=55.2 pwm=1.000 rpi: temp=46.7 mcu_temp: temp=34.4 sd_pos=860 sysload=0.18 cputime=23.204 memavail=1649488 print_time=487.658 buffer_time=0.000 print_stall=4 extruder: target=220 temp=191.8 pwm=1.000
Heater heater_bed within range of 60.000
Stats 480.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=233743 bytes_read=157861 bytes_retransmit=9 bytes_invalid=0 send_seq=7647 receive_seq=7647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=55.4 pwm=1.000 rpi: temp=48.2 mcu_temp: temp=34.5 sd_pos=860 sysload=0.18 cputime=23.254 memavail=1649488 print_time=488.659 buffer_time=0.000 print_stall=4 extruder: target=220 temp=193.7 pwm=1.000
Stats 481.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=233978 bytes_read=158213 bytes_retransmit=9 bytes_invalid=0 send_seq=7660 receive_seq=7660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=55.7 pwm=0.666 rpi: temp=47.2 mcu_temp: temp=34.0 sd_pos=860 sysload=0.16 cputime=23.301 memavail=1648984 print_time=489.659 buffer_time=0.000 print_stall=4 extruder: target=220 temp=195.0 pwm=1.000
Stats 482.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=234206 bytes_read=158600 bytes_retransmit=9 bytes_invalid=0 send_seq=7674 receive_seq=7674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=56.2 pwm=0.178 rpi: temp=47.7 mcu_temp: temp=34.3 sd_pos=860 sysload=0.16 cputime=23.350 memavail=1649176 print_time=490.660 buffer_time=0.000 print_stall=4 extruder: target=220 temp=196.3 pwm=1.000
Stats 483.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=234443 bytes_read=158991 bytes_retransmit=9 bytes_invalid=0 send_seq=7689 receive_seq=7689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=56.3 pwm=0.355 rpi: temp=48.2 mcu_temp: temp=34.6 sd_pos=860 sysload=0.16 cputime=23.401 memavail=1649208 print_time=491.661 buffer_time=0.000 print_stall=4 extruder: target=220 temp=198.1 pwm=1.000
Stats 484.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=234651 bytes_read=159338 bytes_retransmit=9 bytes_invalid=0 send_seq=7701 receive_seq=7701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=56.5 pwm=0.782 rpi: temp=48.2 mcu_temp: temp=34.4 sd_pos=860 sysload=0.16 cputime=23.451 memavail=1648932 print_time=492.662 buffer_time=0.000 print_stall=4 extruder: target=220 temp=199.6 pwm=1.000
Stats 485.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=234898 bytes_read=159725 bytes_retransmit=9 bytes_invalid=0 send_seq=7715 receive_seq=7715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=56.6 pwm=0.773 rpi: temp=47.2 mcu_temp: temp=34.5 sd_pos=860 sysload=0.16 cputime=23.503 memavail=1649272 print_time=493.663 buffer_time=0.000 print_stall=4 extruder: target=220 temp=200.7 pwm=1.000
Stats 486.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=235098 bytes_read=160086 bytes_retransmit=9 bytes_invalid=0 send_seq=7727 receive_seq=7727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=56.6 pwm=1.000 rpi: temp=47.2 mcu_temp: temp=34.3 sd_pos=860 sysload=0.15 cputime=23.553 memavail=1649556 print_time=494.663 buffer_time=0.000 print_stall=4 extruder: target=220 temp=202.4 pwm=1.000
Stats 487.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=235316 bytes_read=160443 bytes_retransmit=9 bytes_invalid=0 send_seq=7741 receive_seq=7741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=56.8 pwm=0.862 rpi: temp=46.7 mcu_temp: temp=34.4 sd_pos=860 sysload=0.15 cputime=23.607 memavail=1649488 print_time=495.664 buffer_time=0.000 print_stall=4 extruder: target=220 temp=203.8 pwm=1.000
Stats 488.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=235559 bytes_read=160866 bytes_retransmit=9 bytes_invalid=0 send_seq=7757 receive_seq=7757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=56.8 pwm=1.000 rpi: temp=48.2 mcu_temp: temp=34.0 sd_pos=860 sysload=0.15 cputime=23.662 memavail=1649584 print_time=496.664 buffer_time=0.000 print_stall=4 extruder: target=220 temp=205.1 pwm=1.000
Stats 489.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=235777 bytes_read=161237 bytes_retransmit=9 bytes_invalid=0 send_seq=7771 receive_seq=7771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=56.9 pwm=1.000 rpi: temp=47.7 mcu_temp: temp=34.1 sd_pos=860 sysload=0.15 cputime=23.714 memavail=1649700 print_time=497.665 buffer_time=0.000 print_stall=4 extruder: target=220 temp=207.0 pwm=0.833
Stats 490.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=235977 bytes_read=161584 bytes_retransmit=9 bytes_invalid=0 send_seq=7783 receive_seq=7783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=56.9 pwm=1.000 rpi: temp=47.7 mcu_temp: temp=34.4 sd_pos=860 sysload=0.15 cputime=23.764 memavail=1649612 print_time=498.666 buffer_time=0.000 print_stall=4 extruder: target=220 temp=208.4 pwm=0.781
Stats 491.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=236224 bytes_read=161976 bytes_retransmit=9 bytes_invalid=0 send_seq=7798 receive_seq=7798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=57.4 pwm=0.072 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=860 sysload=0.14 cputime=23.817 memavail=1649760 print_time=499.667 buffer_time=0.000 print_stall=4 extruder: target=220 temp=209.6 pwm=0.726
Stats 492.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=236465 bytes_read=162347 bytes_retransmit=9 bytes_invalid=0 send_seq=7812 receive_seq=7812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=57.7 pwm=0.229 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=860 sysload=0.14 cputime=23.849 memavail=1649668 print_time=500.668 buffer_time=0.000 print_stall=4 extruder: target=220 temp=211.2 pwm=0.723
Stats 493.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=236723 bytes_read=162724 bytes_retransmit=9 bytes_invalid=0 send_seq=7827 receive_seq=7827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=57.9 pwm=0.212 rpi: temp=47.7 mcu_temp: temp=34.9 sd_pos=860 sysload=0.14 cputime=23.902 memavail=1649752 print_time=501.668 buffer_time=0.000 print_stall=4 extruder: target=220 temp=212.3 pwm=0.692
Stats 494.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=237000 bytes_read=163126 bytes_retransmit=9 bytes_invalid=0 send_seq=7844 receive_seq=7844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=58.1 pwm=0.366 rpi: temp=48.2 mcu_temp: temp=34.1 sd_pos=860 sysload=0.14 cputime=23.955 memavail=1650044 print_time=502.669 buffer_time=0.000 print_stall=4 extruder: target=220 temp=213.5 pwm=0.603
Stats 495.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=237360 bytes_read=163507 bytes_retransmit=9 bytes_invalid=0 send_seq=7860 receive_seq=7860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=58.1 pwm=0.547 rpi: temp=47.2 mcu_temp: temp=34.4 sd_pos=860 sysload=0.14 cputime=24.008 memavail=1650632 print_time=503.670 buffer_time=0.000 print_stall=4 extruder: target=220 temp=215.0 pwm=0.469
Stats 496.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=237581 bytes_read=163854 bytes_retransmit=9 bytes_invalid=0 send_seq=7872 receive_seq=7872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=58.2 pwm=0.684 rpi: temp=48.7 mcu_temp: temp=34.3 sd_pos=860 sysload=0.13 cputime=24.059 memavail=1650188 print_time=504.672 buffer_time=0.000 print_stall=4 extruder: target=220 temp=216.0 pwm=0.397
Heater extruder within range of 220.000
Stats 497.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=237831 bytes_read=164251 bytes_retransmit=9 bytes_invalid=0 send_seq=7888 receive_seq=7888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=58.2 pwm=0.822 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=860 sysload=0.13 cputime=24.112 memavail=1650188 print_time=505.673 buffer_time=0.000 print_stall=4 extruder: target=220 temp=216.7 pwm=0.515
Stats 498.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=238087 bytes_read=164642 bytes_retransmit=9 bytes_invalid=0 send_seq=7903 receive_seq=7903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=58.5 pwm=0.269 rpi: temp=47.7 mcu_temp: temp=34.4 sd_pos=860 sysload=0.13 cputime=24.167 memavail=1650312 print_time=506.673 buffer_time=0.000 print_stall=4 extruder: target=220 temp=217.9 pwm=0.407
Stats 499.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=238316 bytes_read=164999 bytes_retransmit=9 bytes_invalid=0 send_seq=7917 receive_seq=7917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=58.4 pwm=0.854 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=860 sysload=0.13 cputime=24.217 memavail=1649992 print_time=507.673 buffer_time=0.000 print_stall=4 extruder: target=220 temp=218.6 pwm=0.473
Stats 500.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=238708 bytes_read=165411 bytes_retransmit=9 bytes_invalid=0 send_seq=7936 receive_seq=7936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=58.7 pwm=0.562 rpi: temp=48.7 mcu_temp: temp=33.9 sd_pos=860 sysload=0.13 cputime=24.272 memavail=1649944 print_time=508.674 buffer_time=0.000 print_stall=4 extruder: target=220 temp=219.3 pwm=0.396
Stats 501.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=238917 bytes_read=165777 bytes_retransmit=9 bytes_invalid=0 send_seq=7949 receive_seq=7949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=58.9 pwm=0.428 rpi: temp=47.7 mcu_temp: temp=35.0 sd_pos=860 sysload=0.12 cputime=24.322 memavail=1650008 print_time=509.675 buffer_time=0.000 print_stall=4 extruder: target=220 temp=219.9 pwm=0.512
Stats 502.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=239166 bytes_read=166139 bytes_retransmit=9 bytes_invalid=0 send_seq=7964 receive_seq=7964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=58.9 pwm=0.571 rpi: temp=48.2 mcu_temp: temp=34.6 sd_pos=860 sysload=0.12 cputime=24.359 memavail=1649944 print_time=510.675 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.4 pwm=0.420
Stats 503.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=239414 bytes_read=166541 bytes_retransmit=9 bytes_invalid=0 send_seq=7978 receive_seq=7978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=58.9 pwm=0.877 rpi: temp=47.7 mcu_temp: temp=34.5 sd_pos=860 sysload=0.12 cputime=24.413 memavail=1649684 print_time=511.675 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.0 pwm=0.269
Stats 504.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=239653 bytes_read=166917 bytes_retransmit=9 bytes_invalid=0 send_seq=7993 receive_seq=7993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=59.3 pwm=0.000 rpi: temp=48.2 mcu_temp: temp=34.5 sd_pos=860 sysload=0.12 cputime=24.472 memavail=1649612 print_time=512.676 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.2 pwm=0.489
Stats 505.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=239857 bytes_read=167264 bytes_retransmit=9 bytes_invalid=0 send_seq=8005 receive_seq=8005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=59.3 pwm=0.197 rpi: temp=48.7 mcu_temp: temp=34.6 sd_pos=860 sysload=0.12 cputime=24.526 memavail=1649572 print_time=513.677 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.3 pwm=0.605
Stats 506.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=240117 bytes_read=167661 bytes_retransmit=9 bytes_invalid=0 send_seq=8021 receive_seq=8021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=59.5 pwm=0.059 rpi: temp=48.2 mcu_temp: temp=34.3 sd_pos=891 sysload=0.11 cputime=24.578 memavail=1649612 print_time=514.677 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.7 pwm=0.462
Stats 507.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=240363 bytes_read=168042 bytes_retransmit=9 bytes_invalid=0 send_seq=8037 receive_seq=8037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=59.5 pwm=0.208 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.11 cputime=24.630 memavail=1649808 print_time=515.678 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.9 pwm=0.582
Stats 508.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=240745 bytes_read=168434 bytes_retransmit=9 bytes_invalid=0 send_seq=8055 receive_seq=8055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=59.6 pwm=0.543 rpi: temp=48.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.11 cputime=24.684 memavail=1649864 print_time=516.679 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.3 pwm=0.374
Stats 509.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=241004 bytes_read=168831 bytes_retransmit=9 bytes_invalid=0 send_seq=8071 receive_seq=8071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=59.6 pwm=0.670 rpi: temp=48.2 mcu_temp: temp=34.3 sd_pos=891 sysload=0.11 cputime=24.737 memavail=1649840 print_time=517.680 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.1 pwm=0.610
Stats 510.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=241241 bytes_read=169202 bytes_retransmit=9 bytes_invalid=0 send_seq=8085 receive_seq=8085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=59.6 pwm=0.850 rpi: temp=48.2 mcu_temp: temp=34.5 sd_pos=891 sysload=0.11 cputime=24.790 memavail=1649620 print_time=518.681 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.4 pwm=0.544
Stats 511.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=241450 bytes_read=169554 bytes_retransmit=9 bytes_invalid=0 send_seq=8098 receive_seq=8098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=59.7 pwm=0.681 rpi: temp=48.2 mcu_temp: temp=34.7 sd_pos=891 sysload=0.10 cputime=24.825 memavail=1649444 print_time=519.683 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.5 pwm=0.458
Stats 512.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=241694 bytes_read=169946 bytes_retransmit=9 bytes_invalid=0 send_seq=8113 receive_seq=8113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=59.7 pwm=0.861 rpi: temp=49.2 mcu_temp: temp=34.5 sd_pos=891 sysload=0.10 cputime=24.859 memavail=1649512 print_time=520.687 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.6 pwm=0.457
Stats 513.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000040 bytes_write=241952 bytes_read=170342 bytes_retransmit=9 bytes_invalid=0 send_seq=8129 receive_seq=8129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=59.8 pwm=0.567 rpi: temp=49.2 mcu_temp: temp=34.7 sd_pos=891 sysload=0.10 cputime=24.910 memavail=1649564 print_time=521.684 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.5 pwm=0.616
Stats 514.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000040 bytes_write=242162 bytes_read=170694 bytes_retransmit=9 bytes_invalid=0 send_seq=8142 receive_seq=8142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=59.9 pwm=0.422 rpi: temp=49.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.10 cputime=24.959 memavail=1649532 print_time=522.685 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.6 pwm=0.479
Stats 515.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000040 bytes_write=242425 bytes_read=171110 bytes_retransmit=9 bytes_invalid=0 send_seq=8159 receive_seq=8159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996519 heater_bed: target=60 temp=59.9 pwm=0.484 rpi: temp=49.2 mcu_temp: temp=34.7 sd_pos=891 sysload=0.10 cputime=25.013 memavail=1649620 print_time=523.685 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.8 pwm=0.349
Stats 516.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000040 bytes_write=242678 bytes_read=171472 bytes_retransmit=9 bytes_invalid=0 send_seq=8174 receive_seq=8174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.0 pwm=0.300 rpi: temp=47.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.17 cputime=25.067 memavail=1649584 print_time=524.686 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.8 pwm=0.385
Stats 517.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000040 bytes_write=242883 bytes_read=171819 bytes_retransmit=9 bytes_invalid=0 send_seq=8186 receive_seq=8186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.0 pwm=0.434 rpi: temp=48.2 mcu_temp: temp=34.4 sd_pos=891 sysload=0.17 cputime=25.121 memavail=1649260 print_time=525.686 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.7 pwm=0.463
Stats 518.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=243154 bytes_read=172255 bytes_retransmit=9 bytes_invalid=0 send_seq=8204 receive_seq=8204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=59.9 pwm=0.614 rpi: temp=49.2 mcu_temp: temp=34.6 sd_pos=891 sysload=0.17 cputime=25.178 memavail=1649224 print_time=526.687 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.8 pwm=0.386
Stats 519.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=243379 bytes_read=172612 bytes_retransmit=9 bytes_invalid=0 send_seq=8218 receive_seq=8218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.1 pwm=0.088 rpi: temp=47.2 mcu_temp: temp=34.5 sd_pos=891 sysload=0.17 cputime=25.230 memavail=1649224 print_time=527.688 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.6 pwm=0.467
Stats 520.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=243610 bytes_read=172974 bytes_retransmit=9 bytes_invalid=0 send_seq=8233 receive_seq=8233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.0 pwm=0.543 rpi: temp=47.7 mcu_temp: temp=34.4 sd_pos=891 sysload=0.17 cputime=25.283 memavail=1649264 print_time=528.689 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.5 pwm=0.508
Stats 521.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=243839 bytes_read=173380 bytes_retransmit=9 bytes_invalid=0 send_seq=8248 receive_seq=8248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.1 pwm=0.610 rpi: temp=48.2 mcu_temp: temp=34.3 sd_pos=891 sysload=0.16 cputime=25.335 memavail=1649224 print_time=529.696 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.5 pwm=0.502
Stats 522.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=244064 bytes_read=173737 bytes_retransmit=9 bytes_invalid=0 send_seq=8262 receive_seq=8262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.3 pwm=0.169 rpi: temp=49.2 mcu_temp: temp=34.8 sd_pos=891 sysload=0.16 cputime=25.387 memavail=1649776 print_time=530.696 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.6 pwm=0.442
Stats 523.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=244314 bytes_read=174109 bytes_retransmit=9 bytes_invalid=0 send_seq=8276 receive_seq=8276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.2 pwm=0.453 rpi: temp=47.7 mcu_temp: temp=34.5 sd_pos=891 sysload=0.16 cputime=25.430 memavail=1649980 print_time=531.697 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.3 pwm=0.583
Stats 524.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=244540 bytes_read=174510 bytes_retransmit=9 bytes_invalid=0 send_seq=8290 receive_seq=8290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=60.3 pwm=0.418 rpi: temp=49.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.16 cputime=25.482 memavail=1649776 print_time=532.697 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.1 pwm=0.603
Stats 525.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=244781 bytes_read=174872 bytes_retransmit=9 bytes_invalid=0 send_seq=8305 receive_seq=8305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.3 pwm=0.526 rpi: temp=49.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.16 cputime=25.535 memavail=1649460 print_time=533.698 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.1 pwm=0.546
Stats 526.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=245007 bytes_read=175229 bytes_retransmit=9 bytes_invalid=0 send_seq=8319 receive_seq=8319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.2 pwm=0.700 rpi: temp=48.2 mcu_temp: temp=35.0 sd_pos=891 sysload=0.14 cputime=25.587 memavail=1649616 print_time=534.699 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.3 pwm=0.386
Stats 527.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=245269 bytes_read=175636 bytes_retransmit=9 bytes_invalid=0 send_seq=8336 receive_seq=8336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.3 pwm=0.321 rpi: temp=48.2 mcu_temp: temp=34.8 sd_pos=891 sysload=0.14 cputime=25.643 memavail=1649744 print_time=535.702 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.0 pwm=0.551
Stats 528.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=245495 bytes_read=175997 bytes_retransmit=9 bytes_invalid=0 send_seq=8350 receive_seq=8350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.3 pwm=0.535 rpi: temp=47.7 mcu_temp: temp=35.0 sd_pos=891 sysload=0.14 cputime=25.696 memavail=1649604 print_time=536.702 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.1 pwm=0.414
Stats 529.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=245678 bytes_read=176334 bytes_retransmit=9 bytes_invalid=0 send_seq=8362 receive_seq=8362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.3 pwm=0.519 rpi: temp=48.2 mcu_temp: temp=34.6 sd_pos=891 sysload=0.14 cputime=25.746 memavail=1649844 print_time=537.703 buffer_time=0.000 print_stall=4 extruder: target=220 temp=222.1 pwm=0.414
Stats 530.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=246023 bytes_read=176732 bytes_retransmit=9 bytes_invalid=0 send_seq=8378 receive_seq=8378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=60.4 pwm=0.191 rpi: temp=48.7 mcu_temp: temp=34.8 sd_pos=891 sysload=0.14 cputime=25.803 memavail=1650112 print_time=538.703 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.8 pwm=0.500
Stats 531.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=246262 bytes_read=177089 bytes_retransmit=9 bytes_invalid=0 send_seq=8392 receive_seq=8392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=60.4 pwm=0.454 rpi: temp=48.7 mcu_temp: temp=34.2 sd_pos=891 sysload=0.13 cputime=25.854 memavail=1650096 print_time=539.704 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.8 pwm=0.501
Stats 532.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=246488 bytes_read=177461 bytes_retransmit=9 bytes_invalid=0 send_seq=8406 receive_seq=8406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.5 pwm=0.396 rpi: temp=48.2 mcu_temp: temp=34.6 sd_pos=891 sysload=0.13 cputime=25.906 memavail=1650340 print_time=540.705 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.7 pwm=0.514
Stats 533.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000039 bytes_write=246719 bytes_read=177867 bytes_retransmit=9 bytes_invalid=0 send_seq=8421 receive_seq=8421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.4 pwm=0.556 rpi: temp=49.2 mcu_temp: temp=35.0 sd_pos=891 sysload=0.13 cputime=25.950 memavail=1650348 print_time=541.706 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.5 pwm=0.592
Stats 534.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000039 bytes_write=246958 bytes_read=178229 bytes_retransmit=9 bytes_invalid=0 send_seq=8436 receive_seq=8436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.5 pwm=0.309 rpi: temp=48.7 mcu_temp: temp=34.7 sd_pos=891 sysload=0.13 cputime=26.003 memavail=1650052 print_time=542.708 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.6 pwm=0.412
Stats 535.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000039 bytes_write=247198 bytes_read=178601 bytes_retransmit=9 bytes_invalid=0 send_seq=8450 receive_seq=8450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.6 pwm=0.233 rpi: temp=48.7 mcu_temp: temp=34.7 sd_pos=891 sysload=0.13 cputime=26.039 memavail=1650108 print_time=543.708 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.4 pwm=0.471
Stats 536.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000039 bytes_write=247429 bytes_read=178992 bytes_retransmit=9 bytes_invalid=0 send_seq=8465 receive_seq=8465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.6 pwm=0.289 rpi: temp=49.7 mcu_temp: temp=34.6 sd_pos=891 sysload=0.12 cputime=26.092 memavail=1650108 print_time=544.709 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.2 pwm=0.569
Stats 537.3: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000039 bytes_write=247639 bytes_read=179344 bytes_retransmit=9 bytes_invalid=0 send_seq=8478 receive_seq=8478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.6 pwm=0.299 rpi: temp=49.7 mcu_temp: temp=34.9 sd_pos=891 sysload=0.12 cputime=26.145 memavail=1650164 print_time=545.709 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.1 pwm=0.511
Stats 538.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=247865 bytes_read=179731 bytes_retransmit=9 bytes_invalid=0 send_seq=8492 receive_seq=8492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.5 pwm=0.566 rpi: temp=49.2 mcu_temp: temp=34.5 sd_pos=891 sysload=0.12 cputime=26.197 memavail=1650060 print_time=546.710 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.1 pwm=0.496
Stats 539.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=248079 bytes_read=180117 bytes_retransmit=9 bytes_invalid=0 send_seq=8506 receive_seq=8506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.6 pwm=0.572 rpi: temp=48.7 mcu_temp: temp=34.8 sd_pos=891 sysload=0.12 cputime=26.252 memavail=1649612 print_time=547.711 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.9 pwm=0.585
Stats 540.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=248302 bytes_read=180474 bytes_retransmit=9 bytes_invalid=0 send_seq=8520 receive_seq=8520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.7 pwm=0.000 rpi: temp=48.7 mcu_temp: temp=34.9 sd_pos=891 sysload=0.12 cputime=26.302 memavail=1649864 print_time=548.711 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.9 pwm=0.546
Stats 541.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=248526 bytes_read=180846 bytes_retransmit=9 bytes_invalid=0 send_seq=8534 receive_seq=8534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.7 pwm=0.167 rpi: temp=49.7 mcu_temp: temp=34.8 sd_pos=891 sysload=0.11 cputime=26.354 memavail=1650176 print_time=549.712 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.0 pwm=0.504
Stats 542.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=248709 bytes_read=181222 bytes_retransmit=9 bytes_invalid=0 send_seq=8546 receive_seq=8546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.6 pwm=0.586 rpi: temp=49.2 mcu_temp: temp=34.5 sd_pos=891 sysload=0.11 cputime=26.390 memavail=1649440 print_time=550.713 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.9 pwm=0.504
Stats 543.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=248916 bytes_read=181589 bytes_retransmit=9 bytes_invalid=0 send_seq=8559 receive_seq=8559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.7 pwm=0.368 rpi: temp=48.7 mcu_temp: temp=35.1 sd_pos=891 sysload=0.11 cputime=26.442 memavail=1649928 print_time=551.713 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.8 pwm=0.563
Stats 544.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=249157 bytes_read=181966 bytes_retransmit=9 bytes_invalid=0 send_seq=8574 receive_seq=8574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=60.6 pwm=0.776 rpi: temp=48.7 mcu_temp: temp=35.3 sd_pos=891 sysload=0.11 cputime=26.495 memavail=1649868 print_time=552.714 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.8 pwm=0.481
Stats 545.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=249418 bytes_read=182367 bytes_retransmit=9 bytes_invalid=0 send_seq=8591 receive_seq=8591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=60.8 pwm=0.182 rpi: temp=49.2 mcu_temp: temp=35.2 sd_pos=891 sysload=0.11 cputime=26.549 memavail=1649368 print_time=553.718 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.9 pwm=0.400
Stats 546.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=250043 bytes_read=182932 bytes_retransmit=9 bytes_invalid=0 send_seq=8627 receive_seq=8627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=60.7 pwm=0.591 rpi: temp=50.1 mcu_temp: temp=34.8 sd_pos=928 sysload=0.10 cputime=26.623 memavail=1649072 print_time=555.580 buffer_time=0.000 print_stall=4 extruder: target=220 temp=221.0 pwm=0.380
Stats 547.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=250634 bytes_read=183569 bytes_retransmit=9 bytes_invalid=0 send_seq=8666 receive_seq=8666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=60.7 pwm=0.348 rpi: temp=49.2 mcu_temp: temp=34.7 sd_pos=928 sysload=0.10 cputime=26.688 memavail=1649384 print_time=556.580 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.7 pwm=0.556
Stats 548.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=251512 bytes_read=184374 bytes_retransmit=9 bytes_invalid=0 send_seq=8714 receive_seq=8714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996526 heater_bed: target=60 temp=60.7 pwm=0.344 rpi: temp=50.1 mcu_temp: temp=34.7 sd_pos=928 sysload=0.10 cputime=26.751 memavail=1649252 print_time=557.557 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.9 pwm=0.476
Stats 549.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=252158 bytes_read=185008 bytes_retransmit=9 bytes_invalid=0 send_seq=8756 receive_seq=8756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=60.6 pwm=0.670 rpi: temp=50.1 mcu_temp: temp=34.8 sd_pos=928 sysload=0.10 cputime=26.818 memavail=1649324 print_time=558.557 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.7 pwm=0.476
Stats 550.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=252744 bytes_read=185650 bytes_retransmit=9 bytes_invalid=0 send_seq=8796 receive_seq=8796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.6 pwm=0.554 rpi: temp=50.6 mcu_temp: temp=35.0 sd_pos=928 sysload=0.10 cputime=26.887 memavail=1649524 print_time=559.557 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.8 pwm=0.453
Stats 551.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=253330 bytes_read=186306 bytes_retransmit=9 bytes_invalid=0 send_seq=8836 receive_seq=8836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.6 pwm=0.416 rpi: temp=49.2 mcu_temp: temp=35.1 sd_pos=928 sysload=0.17 cputime=26.954 memavail=1649344 print_time=560.557 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.8 pwm=0.440
Stats 552.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=253894 bytes_read=186933 bytes_retransmit=9 bytes_invalid=0 send_seq=8876 receive_seq=8876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=60.6 pwm=0.407 rpi: temp=49.7 mcu_temp: temp=34.8 sd_pos=928 sysload=0.17 cputime=27.020 memavail=1649908 print_time=561.557 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.7 pwm=0.440
Stats 553.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=255096 bytes_read=187687 bytes_retransmit=9 bytes_invalid=0 send_seq=8925 receive_seq=8925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=8 freq=71996518 heater_bed: target=60 temp=60.6 pwm=0.231 rpi: temp=49.7 mcu_temp: temp=34.9 sd_pos=928 sysload=0.17 cputime=27.110 memavail=1649656 print_time=566.614 buffer_time=4.219 print_stall=4 extruder: target=220 temp=220.6 pwm=0.527
Stats 554.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=255326 bytes_read=188078 bytes_retransmit=9 bytes_invalid=0 send_seq=8940 receive_seq=8940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996518 heater_bed: target=60 temp=60.6 pwm=0.108 rpi: temp=49.2 mcu_temp: temp=35.0 sd_pos=928 sysload=0.17 cputime=27.162 memavail=1649404 print_time=566.614 buffer_time=3.219 print_stall=4 extruder: target=220 temp=220.6 pwm=0.541
Stats 555.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=255547 bytes_read=188430 bytes_retransmit=9 bytes_invalid=0 send_seq=8953 receive_seq=8953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996518 heater_bed: target=60 temp=60.6 pwm=0.332 rpi: temp=49.2 mcu_temp: temp=35.0 sd_pos=928 sysload=0.17 cputime=27.211 memavail=1649308 print_time=566.614 buffer_time=2.219 print_stall=4 extruder: target=220 temp=220.6 pwm=0.427
Stats 556.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=255848 bytes_read=188817 bytes_retransmit=9 bytes_invalid=0 send_seq=8970 receive_seq=8970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=8 freq=71996516 heater_bed: target=60 temp=60.7 pwm=0.000 rpi: temp=49.7 mcu_temp: temp=34.7 sd_pos=928 sysload=0.24 cputime=27.262 memavail=1649464 print_time=566.616 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.5 pwm=0.421
Stats 557.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=256100 bytes_read=189213 bytes_retransmit=9 bytes_invalid=0 send_seq=8986 receive_seq=8986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=60 temp=60.6 pwm=0.219 rpi: temp=49.7 mcu_temp: temp=34.8 sd_pos=928 sysload=0.24 cputime=27.294 memavail=1649096 print_time=566.616 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.3 pwm=0.549
Stats 558.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=256680 bytes_read=189802 bytes_retransmit=9 bytes_invalid=0 send_seq=9021 receive_seq=9021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=60.7 pwm=0.079 rpi: temp=49.2 mcu_temp: temp=35.2 sd_pos=928 sysload=0.24 cputime=27.360 memavail=1649416 print_time=567.566 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.3 pwm=0.498
Stats 559.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=257474 bytes_read=190511 bytes_retransmit=9 bytes_invalid=0 send_seq=9065 receive_seq=9065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=26 freq=71996520 heater_bed: target=60 temp=60.8 pwm=0.110 rpi: temp=49.2 mcu_temp: temp=34.8 sd_pos=928 sysload=0.24 cputime=27.435 memavail=1649400 print_time=571.512 buffer_time=3.114 print_stall=4 extruder: target=220 temp=220.2 pwm=0.556
Stats 560.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=257695 bytes_read=190897 bytes_retransmit=9 bytes_invalid=0 send_seq=9079 receive_seq=9079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=8 freq=71996520 heater_bed: target=60 temp=60.8 pwm=0.268 rpi: temp=49.7 mcu_temp: temp=34.9 sd_pos=928 sysload=0.24 cputime=27.484 memavail=1649716 print_time=571.512 buffer_time=2.114 print_stall=4 extruder: target=220 temp=220.2 pwm=0.455
Stats 561.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=258000 bytes_read=191264 bytes_retransmit=9 bytes_invalid=0 send_seq=9095 receive_seq=9095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996520 heater_bed: target=60 temp=60.7 pwm=0.523 rpi: temp=49.7 mcu_temp: temp=35.3 sd_pos=928 sysload=0.22 cputime=27.535 memavail=1649840 print_time=571.514 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.2 pwm=0.512
Stats 562.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=258238 bytes_read=191641 bytes_retransmit=9 bytes_invalid=0 send_seq=9110 receive_seq=9110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=60.7 pwm=0.243 rpi: temp=49.7 mcu_temp: temp=34.8 sd_pos=928 sysload=0.22 cputime=27.569 memavail=1650124 print_time=571.564 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.3 pwm=0.456
Stats 563.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=258824 bytes_read=192288 bytes_retransmit=9 bytes_invalid=0 send_seq=9148 receive_seq=9148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=60.7 pwm=0.577 rpi: temp=49.7 mcu_temp: temp=35.3 sd_pos=928 sysload=0.22 cputime=27.635 memavail=1650136 print_time=572.564 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.2 pwm=0.478
Stats 564.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=259383 bytes_read=192910 bytes_retransmit=9 bytes_invalid=0 send_seq=9187 receive_seq=9187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=60 temp=60.7 pwm=0.569 rpi: temp=50.1 mcu_temp: temp=35.0 sd_pos=928 sysload=0.22 cputime=27.700 memavail=1649876 print_time=573.564 buffer_time=0.000 print_stall=4 extruder: target=220 temp=220.1 pwm=0.536
Stats 565.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=260172 bytes_read=193490 bytes_retransmit=9 bytes_invalid=0 send_seq=9222 receive_seq=9222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=60.7 pwm=0.530 rpi: temp=48.7 mcu_temp: temp=35.3 sd_pos=928 sysload=0.22 cputime=27.768 memavail=1650388 print_time=578.128 buffer_time=3.728 print_stall=4 extruder: target=220 temp=220.3 pwm=0.366
Stats 566.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=260403 bytes_read=193881 bytes_retransmit=9 bytes_invalid=0 send_seq=9237 receive_seq=9237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996515 heater_bed: target=60 temp=60.7 pwm=0.327 rpi: temp=49.7 mcu_temp: temp=35.0 sd_pos=928 sysload=0.20 cputime=27.818 memavail=1649824 print_time=578.128 buffer_time=2.728 print_stall=4 extruder: target=220 temp=220.1 pwm=0.544
Stats 567.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=261015 bytes_read=194273 bytes_retransmit=9 bytes_invalid=0 send_seq=9258 receive_seq=9258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=60.7 pwm=0.208 rpi: temp=50.1 mcu_temp: temp=35.1 sd_pos=928 sysload=0.20 cputime=27.872 memavail=1649504 print_time=580.348 buffer_time=3.947 print_stall=4 extruder: target=220 temp=220.1 pwm=0.521
Stats 568.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=261225 bytes_read=194655 bytes_retransmit=9 bytes_invalid=0 send_seq=9271 receive_seq=9271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=60.7 pwm=0.207 rpi: temp=49.2 mcu_temp: temp=35.3 sd_pos=928 sysload=0.20 cputime=27.923 memavail=1649580 print_time=580.348 buffer_time=2.946 print_stall=4 extruder: target=220 temp=220.2 pwm=0.462
Stats 569.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=261484 bytes_read=195041 bytes_retransmit=9 bytes_invalid=0 send_seq=9285 receive_seq=9285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=60.7 pwm=0.247 rpi: temp=49.2 mcu_temp: temp=35.0 sd_pos=928 sysload=0.20 cputime=27.978 memavail=1649568 print_time=581.048 buffer_time=2.645 print_stall=4 extruder: target=220 temp=220.2 pwm=0.462
Stats 570.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=262037 bytes_read=195428 bytes_retransmit=9 bytes_invalid=0 send_seq=9305 receive_seq=9305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.7 pwm=0.214 rpi: temp=49.2 mcu_temp: temp=35.3 sd_pos=928 sysload=0.20 cputime=28.033 memavail=1649640 print_time=581.713 buffer_time=2.310 print_stall=4 extruder: target=220 temp=220.1 pwm=0.559
Stats 571.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=262507 bytes_read=195835 bytes_retransmit=9 bytes_invalid=0 send_seq=9326 receive_seq=9326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.7 pwm=0.074 rpi: temp=49.7 mcu_temp: temp=35.2 sd_pos=928 sysload=0.19 cputime=28.088 memavail=1649576 print_time=583.122 buffer_time=2.719 print_stall=4 extruder: target=220 temp=220.1 pwm=0.556
Stats 572.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=262834 bytes_read=196226 bytes_retransmit=9 bytes_invalid=0 send_seq=9341 receive_seq=9341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.6 pwm=0.520 rpi: temp=49.7 mcu_temp: temp=35.1 sd_pos=928 sysload=0.19 cputime=28.143 memavail=1649012 print_time=583.922 buffer_time=2.518 print_stall=4 extruder: target=220 temp=220.2 pwm=0.468
Stats 573.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=263239 bytes_read=196603 bytes_retransmit=9 bytes_invalid=0 send_seq=9356 receive_seq=9356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=60.5 pwm=0.667 rpi: temp=49.7 mcu_temp: temp=35.2 sd_pos=928 sysload=0.19 cputime=28.197 memavail=1649276 print_time=586.522 buffer_time=4.118 print_stall=4 extruder: target=220 temp=220.1 pwm=0.491
Stats 574.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=263438 bytes_read=196970 bytes_retransmit=9 bytes_invalid=0 send_seq=9369 receive_seq=9369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996523 heater_bed: target=60 temp=60.5 pwm=0.525 rpi: temp=50.6 mcu_temp: temp=35.2 sd_pos=928 sysload=0.19 cputime=28.247 memavail=1649280 print_time=586.522 buffer_time=3.117 print_stall=4 extruder: target=220 temp=220.1 pwm=0.491
Stats 575.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=263634 bytes_read=197341 bytes_retransmit=9 bytes_invalid=0 send_seq=9380 receive_seq=9380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996525 heater_bed: target=60 temp=60.4 pwm=0.798 rpi: temp=50.6 mcu_temp: temp=35.2 sd_pos=928 sysload=0.19 cputime=28.295 memavail=1649256 print_time=586.522 buffer_time=2.117 print_stall=4 extruder: target=220 temp=219.9 pwm=0.615
Stats 576.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=264126 bytes_read=197723 bytes_retransmit=9 bytes_invalid=0 send_seq=9399 receive_seq=9399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996522 heater_bed: target=60 temp=60.5 pwm=0.027 rpi: temp=49.2 mcu_temp: temp=35.0 sd_pos=928 sysload=0.17 cputime=28.328 memavail=1649336 print_time=588.929 buffer_time=3.523 print_stall=4 extruder: target=220 temp=219.9 pwm=0.522
Stats 577.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=264348 bytes_read=198095 bytes_retransmit=9 bytes_invalid=0 send_seq=9413 receive_seq=9413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.6 pwm=0.000 rpi: temp=49.7 mcu_temp: temp=35.1 sd_pos=928 sysload=0.17 cputime=28.377 memavail=1648740 print_time=588.929 buffer_time=2.522 print_stall=4 extruder: target=220 temp=219.9 pwm=0.576
Stats 578.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=264955 bytes_read=198531 bytes_retransmit=9 bytes_invalid=0 send_seq=9434 receive_seq=9434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=60.6 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.2 sd_pos=928 sysload=0.17 cputime=28.433 memavail=1649228 print_time=590.961 buffer_time=3.554 print_stall=4 extruder: target=220 temp=219.7 pwm=0.620
Stats 579.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=265181 bytes_read=198888 bytes_retransmit=9 bytes_invalid=0 send_seq=9448 receive_seq=9448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=60.6 pwm=0.425 rpi: temp=50.6 mcu_temp: temp=34.9 sd_pos=928 sysload=0.17 cputime=28.485 memavail=1649104 print_time=590.961 buffer_time=2.553 print_stall=4 extruder: target=220 temp=219.8 pwm=0.531
Stats 580.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=265505 bytes_read=199280 bytes_retransmit=9 bytes_invalid=0 send_seq=9463 receive_seq=9463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=60.5 pwm=0.596 rpi: temp=50.1 mcu_temp: temp=35.5 sd_pos=928 sysload=0.17 cputime=28.543 memavail=1648908 print_time=591.711 buffer_time=2.302 print_stall=4 extruder: target=220 temp=219.4 pwm=0.742
Stats 581.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=265820 bytes_read=199661 bytes_retransmit=9 bytes_invalid=0 send_seq=9479 receive_seq=9479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996524 heater_bed: target=60 temp=60.6 pwm=0.168 rpi: temp=51.1 mcu_temp: temp=35.5 sd_pos=928 sysload=0.16 cputime=28.600 memavail=1649128 print_time=592.461 buffer_time=2.051 print_stall=4 extruder: target=220 temp=219.6 pwm=0.596
Stats 582.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=266220 bytes_read=200033 bytes_retransmit=9 bytes_invalid=0 send_seq=9496 receive_seq=9496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.6 pwm=0.438 rpi: temp=49.2 mcu_temp: temp=35.1 sd_pos=1325 sysload=0.16 cputime=28.636 memavail=1649544 print_time=594.718 buffer_time=3.308 print_stall=4 extruder: target=220 temp=219.6 pwm=0.544
Stats 583.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=266430 bytes_read=200430 bytes_retransmit=9 bytes_invalid=0 send_seq=9509 receive_seq=9509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.5 pwm=0.445 rpi: temp=50.1 mcu_temp: temp=34.7 sd_pos=1325 sysload=0.16 cputime=28.687 memavail=1649232 print_time=594.718 buffer_time=2.307 print_stall=4 extruder: target=220 temp=219.4 pwm=0.624
Stats 584.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=267571 bytes_read=200866 bytes_retransmit=9 bytes_invalid=0 send_seq=9536 receive_seq=9536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.6 pwm=0.321 rpi: temp=50.1 mcu_temp: temp=35.4 sd_pos=1459 sysload=0.16 cputime=28.749 memavail=1649240 print_time=596.999 buffer_time=3.587 print_stall=4 extruder: target=220 temp=219.4 pwm=0.611
Stats 585.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=267797 bytes_read=201223 bytes_retransmit=9 bytes_invalid=0 send_seq=9550 receive_seq=9550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.5 pwm=0.500 rpi: temp=49.7 mcu_temp: temp=35.4 sd_pos=1459 sysload=0.16 cputime=28.799 memavail=1649224 print_time=596.999 buffer_time=2.587 print_stall=4 extruder: target=220 temp=219.3 pwm=0.575
Stats 586.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=268270 bytes_read=201618 bytes_retransmit=9 bytes_invalid=0 send_seq=9566 receive_seq=9566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.5 pwm=0.264 rpi: temp=50.6 mcu_temp: temp=34.8 sd_pos=1519 sysload=0.14 cputime=28.854 memavail=1649232 print_time=598.217 buffer_time=2.804 print_stall=4 extruder: target=220 temp=219.2 pwm=0.641
Stats 587.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=268783 bytes_read=201998 bytes_retransmit=9 bytes_invalid=0 send_seq=9584 receive_seq=9584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=60 temp=60.4 pwm=0.636 rpi: temp=49.7 mcu_temp: temp=35.3 sd_pos=1579 sysload=0.14 cputime=28.908 memavail=1649192 print_time=599.434 buffer_time=3.021 print_stall=4 extruder: target=220 temp=219.2 pwm=0.550
Stats 588.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=269048 bytes_read=202370 bytes_retransmit=9 bytes_invalid=0 send_seq=9600 receive_seq=9600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=60 temp=60.5 pwm=0.149 rpi: temp=49.7 mcu_temp: temp=35.1 sd_pos=1579 sysload=0.14 cputime=28.960 memavail=1649240 print_time=599.434 buffer_time=2.020 print_stall=4 extruder: target=220 temp=219.2 pwm=0.582
Stats 589.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=269570 bytes_read=202770 bytes_retransmit=9 bytes_invalid=0 send_seq=9619 receive_seq=9619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996519 heater_bed: target=60 temp=60.6 pwm=0.186 rpi: temp=49.2 mcu_temp: temp=35.0 sd_pos=1639 sysload=0.14 cputime=29.018 memavail=1649140 print_time=600.652 buffer_time=2.238 print_stall=4 extruder: target=220 temp=219.3 pwm=0.506
Stats 590.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=270385 bytes_read=203189 bytes_retransmit=9 bytes_invalid=0 send_seq=9644 receive_seq=9644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996518 heater_bed: target=60 temp=60.5 pwm=0.366 rpi: temp=49.7 mcu_temp: temp=35.2 sd_pos=1935 sysload=0.14 cputime=29.076 memavail=1648956 print_time=601.656 buffer_time=2.241 print_stall=4 extruder: target=220 temp=219.1 pwm=0.660
Stats 591.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=271473 bytes_read=203616 bytes_retransmit=9 bytes_invalid=0 send_seq=9672 receive_seq=9672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=60.4 pwm=0.770 rpi: temp=50.6 mcu_temp: temp=35.4 sd_pos=2292 sysload=0.21 cputime=29.137 memavail=1649232 print_time=602.655 buffer_time=2.239 print_stall=4 extruder: target=220 temp=219.0 pwm=0.694
Stats 592.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=272559 bytes_read=204068 bytes_retransmit=9 bytes_invalid=0 send_seq=9699 receive_seq=9699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=60.5 pwm=0.398 rpi: temp=49.7 mcu_temp: temp=35.6 sd_pos=2502 sysload=0.21 cputime=29.174 memavail=1649456 print_time=603.466 buffer_time=2.049 print_stall=4 extruder: target=220 temp=219.2 pwm=0.520
Stats 593.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=273953 bytes_read=204539 bytes_retransmit=9 bytes_invalid=0 send_seq=9730 receive_seq=9730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=60.5 pwm=0.245 rpi: temp=50.6 mcu_temp: temp=35.3 sd_pos=2963 sysload=0.21 cputime=29.237 memavail=1649424 print_time=604.687 buffer_time=2.270 print_stall=4 extruder: target=220 temp=219.2 pwm=0.553
Stats 594.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=274939 bytes_read=204956 bytes_retransmit=9 bytes_invalid=0 send_seq=9756 receive_seq=9756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996517 heater_bed: target=60 temp=60.5 pwm=0.180 rpi: temp=50.1 mcu_temp: temp=35.0 sd_pos=3221 sysload=0.21 cputime=29.297 memavail=1649544 print_time=605.598 buffer_time=2.180 print_stall=4 extruder: target=220 temp=219.3 pwm=0.553
Stats 595.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=275961 bytes_read=205398 bytes_retransmit=9 bytes_invalid=0 send_seq=9781 receive_seq=9781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996516 heater_bed: target=60 temp=60.5 pwm=0.378 rpi: temp=49.7 mcu_temp: temp=35.3 sd_pos=3566 sysload=0.21 cputime=29.357 memavail=1649632 print_time=606.887 buffer_time=2.468 print_stall=4 extruder: target=220 temp=219.4 pwm=0.607
Exiting SD card print (position 3594)
action:cancel
Stats 596.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=276327 bytes_read=205784 bytes_retransmit=9 bytes_invalid=0 send_seq=9798 receive_seq=9798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=0 temp=60.5 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.3  sysload=0.20 cputime=29.429 memavail=1649592 print_time=606.887 buffer_time=1.465 print_stall=4 extruder: target=0 temp=219.7 pwm=0.000
Stats 597.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=276597 bytes_read=206131 bytes_retransmit=9 bytes_invalid=0 send_seq=9810 receive_seq=9810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996515 heater_bed: target=0 temp=60.5 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.6  sysload=0.20 cputime=29.473 memavail=1649520 print_time=607.401 buffer_time=0.980 print_stall=4 extruder: target=0 temp=219.6 pwm=0.000
Stats 598.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=276941 bytes_read=206528 bytes_retransmit=9 bytes_invalid=0 send_seq=9823 receive_seq=9823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=0 temp=60.6 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.7  sysload=0.20 cputime=29.525 memavail=1649604 print_time=609.598 buffer_time=2.176 print_stall=5 extruder: target=0 temp=219.7 pwm=0.000
Stats 599.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=277116 bytes_read=206889 bytes_retransmit=9 bytes_invalid=0 send_seq=9835 receive_seq=9835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=0 temp=60.6 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=35.5  sysload=0.20 cputime=29.574 memavail=1649592 print_time=609.598 buffer_time=1.175 print_stall=5 extruder: target=0 temp=219.7 pwm=0.000
Stats 600.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=277538 bytes_read=207251 bytes_retransmit=9 bytes_invalid=0 send_seq=9850 receive_seq=9850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=0 temp=60.4 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=35.8  sysload=0.20 cputime=29.627 memavail=1649428 print_time=609.793 buffer_time=0.370 print_stall=6 extruder: target=0 temp=219.5 pwm=0.000
Stats 601.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=277926 bytes_read=207633 bytes_retransmit=9 bytes_invalid=0 send_seq=9863 receive_seq=9863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=0 temp=60.3 pwm=0.000 rpi: temp=49.7 mcu_temp: temp=35.7  sysload=0.18 cputime=29.678 memavail=1649844 print_time=610.702 buffer_time=0.279 print_stall=7 extruder: target=0 temp=219.5 pwm=0.000
Stats 602.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=278748 bytes_read=208039 bytes_retransmit=9 bytes_invalid=0 send_seq=9884 receive_seq=9884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=0 temp=60.2 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.5  sysload=0.18 cputime=29.721 memavail=1650200 print_time=611.648 buffer_time=0.224 print_stall=10 extruder: target=0 temp=218.9 pwm=0.000
Stats 603.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=279109 bytes_read=208416 bytes_retransmit=9 bytes_invalid=0 send_seq=9899 receive_seq=9899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996521 heater_bed: target=0 temp=60.1 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=35.9  sysload=0.18 cputime=29.770 memavail=1649552 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=218.6 pwm=0.000
Stats 604.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=279326 bytes_read=208793 bytes_retransmit=9 bytes_invalid=0 send_seq=9911 receive_seq=9911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=60.1 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.8  sysload=0.18 cputime=29.818 memavail=1649568 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=218.0 pwm=0.000
Stats 605.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=279463 bytes_read=209144 bytes_retransmit=9 bytes_invalid=0 send_seq=9921 receive_seq=9921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996519 heater_bed: target=0 temp=60.1 pwm=0.000 rpi: temp=49.7 mcu_temp: temp=35.9  sysload=0.18 cputime=29.865 memavail=1649544 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=217.5 pwm=0.000
Stats 606.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=279614 bytes_read=209481 bytes_retransmit=9 bytes_invalid=0 send_seq=9931 receive_seq=9931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=0 temp=60.0 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=35.7  sysload=0.17 cputime=29.912 memavail=1649356 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=216.8 pwm=0.000
Stats 607.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000034 bytes_write=279751 bytes_read=209848 bytes_retransmit=9 bytes_invalid=0 send_seq=9941 receive_seq=9941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996518 heater_bed: target=0 temp=59.9 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.8  sysload=0.17 cputime=29.958 memavail=1649104 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=216.0 pwm=0.000
Stats 608.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=279912 bytes_read=210224 bytes_retransmit=9 bytes_invalid=0 send_seq=9953 receive_seq=9953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996517 heater_bed: target=0 temp=59.8 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.5  sysload=0.17 cputime=30.005 memavail=1648740 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=215.3 pwm=0.000
Stats 609.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=280073 bytes_read=210571 bytes_retransmit=9 bytes_invalid=0 send_seq=9965 receive_seq=9965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996516 heater_bed: target=0 temp=59.9 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.7  sysload=0.17 cputime=30.051 memavail=1648936 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=214.3 pwm=0.000
Stats 610.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=280230 bytes_read=210954 bytes_retransmit=9 bytes_invalid=0 send_seq=9976 receive_seq=9976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996514 heater_bed: target=0 temp=59.8 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.8  sysload=0.17 cputime=30.100 memavail=1649000 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=213.6 pwm=0.000
Stats 611.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=280381 bytes_read=211305 bytes_retransmit=9 bytes_invalid=0 send_seq=9986 receive_seq=9986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=0 temp=59.6 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.5  sysload=0.15 cputime=30.148 memavail=1648752 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=212.4 pwm=0.000
Stats 612.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=280532 bytes_read=211642 bytes_retransmit=9 bytes_invalid=0 send_seq=9996 receive_seq=9996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=0 temp=59.3 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.5  sysload=0.15 cputime=30.180 memavail=1648820 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=211.7 pwm=0.000
Stats 613.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=280711 bytes_read=212034 bytes_retransmit=9 bytes_invalid=0 send_seq=10008 receive_seq=10008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=0 temp=59.2 pwm=0.000 rpi: temp=49.7 mcu_temp: temp=36.0  sysload=0.15 cputime=30.226 memavail=1648864 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=210.7 pwm=0.000
Stats 614.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=280862 bytes_read=212385 bytes_retransmit=9 bytes_invalid=0 send_seq=10018 receive_seq=10018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996511 heater_bed: target=0 temp=58.9 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.9  sysload=0.15 cputime=30.270 memavail=1648760 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=209.5 pwm=0.000
Stats 615.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=281017 bytes_read=212722 bytes_retransmit=9 bytes_invalid=0 send_seq=10028 receive_seq=10028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996512 heater_bed: target=0 temp=58.9 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.3  sysload=0.15 cputime=30.306 memavail=1648808 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=208.5 pwm=0.000
Stats 616.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=281168 bytes_read=213089 bytes_retransmit=9 bytes_invalid=0 send_seq=10038 receive_seq=10038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996510 heater_bed: target=0 temp=58.7 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.2  sysload=0.14 cputime=30.350 memavail=1648424 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=207.5 pwm=0.000
Stats 617.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=281319 bytes_read=213440 bytes_retransmit=9 bytes_invalid=0 send_seq=10048 receive_seq=10048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=0 temp=58.7 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.5  sysload=0.14 cputime=30.382 memavail=1648448 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=206.2 pwm=0.000
Stats 618.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=281470 bytes_read=213792 bytes_retransmit=9 bytes_invalid=0 send_seq=10058 receive_seq=10058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=58.5 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.9  sysload=0.14 cputime=30.426 memavail=1648800 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=205.3 pwm=0.000
Stats 619.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=281621 bytes_read=214159 bytes_retransmit=9 bytes_invalid=0 send_seq=10068 receive_seq=10068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996509 heater_bed: target=0 temp=58.6 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=35.9  sysload=0.14 cputime=30.473 memavail=1648220 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=204.0 pwm=0.000
Stats 620.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=281796 bytes_read=214520 bytes_retransmit=9 bytes_invalid=0 send_seq=10080 receive_seq=10080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=0 temp=58.4 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.9  sysload=0.14 cputime=30.519 memavail=1648172 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=202.7 pwm=0.000
Stats 621.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=281957 bytes_read=214867 bytes_retransmit=9 bytes_invalid=0 send_seq=10092 receive_seq=10092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=0 temp=58.2 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.7  sysload=0.13 cputime=30.564 memavail=1648724 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=201.7 pwm=0.000
Stats 622.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=282132 bytes_read=215244 bytes_retransmit=9 bytes_invalid=0 send_seq=10104 receive_seq=10104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=58.2 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.1  sysload=0.13 cputime=30.609 memavail=1649540 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=200.7 pwm=0.000
Stats 623.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=282283 bytes_read=215610 bytes_retransmit=9 bytes_invalid=0 send_seq=10114 receive_seq=10114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=0 temp=58.1 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.9  sysload=0.13 cputime=30.655 memavail=1649848 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=199.3 pwm=0.000
Stats 624.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=282438 bytes_read=215947 bytes_retransmit=9 bytes_invalid=0 send_seq=10124 receive_seq=10124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=58.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.1  sysload=0.13 cputime=30.699 memavail=1649852 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=198.2 pwm=0.000
Stats 625.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=282589 bytes_read=216314 bytes_retransmit=9 bytes_invalid=0 send_seq=10134 receive_seq=10134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=0 temp=57.7 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.2  sysload=0.13 cputime=30.746 memavail=1650192 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=197.2 pwm=0.000
Stats 626.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=282750 bytes_read=216675 bytes_retransmit=9 bytes_invalid=0 send_seq=10146 receive_seq=10146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=57.9 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=36.6  sysload=0.12 cputime=30.794 memavail=1650080 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=195.9 pwm=0.000
Stats 627.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=282906 bytes_read=217017 bytes_retransmit=9 bytes_invalid=0 send_seq=10157 receive_seq=10157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=57.8 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=36.2  sysload=0.12 cputime=30.840 memavail=1650488 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=194.7 pwm=0.000
Stats 628.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=283067 bytes_read=217409 bytes_retransmit=9 bytes_invalid=0 send_seq=10169 receive_seq=10169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=57.4 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.4  sysload=0.12 cputime=30.887 memavail=1650748 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=193.7 pwm=0.000
Stats 629.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=283256 bytes_read=217770 bytes_retransmit=9 bytes_invalid=0 send_seq=10181 receive_seq=10181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=57.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.3  sysload=0.12 cputime=30.933 memavail=1650228 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=192.3 pwm=0.000
Stats 630.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=283407 bytes_read=218107 bytes_retransmit=9 bytes_invalid=0 send_seq=10191 receive_seq=10191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=0 temp=56.9 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.0  sysload=0.12 cputime=30.981 memavail=1650200 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=191.3 pwm=0.000
Stats 631.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=283558 bytes_read=218474 bytes_retransmit=9 bytes_invalid=0 send_seq=10201 receive_seq=10201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=56.9 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.3  sysload=0.11 cputime=31.029 memavail=1650496 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=190.3 pwm=0.000
Stats 632.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=283714 bytes_read=218830 bytes_retransmit=9 bytes_invalid=0 send_seq=10212 receive_seq=10212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=0 temp=56.8 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.0  sysload=0.11 cputime=31.074 memavail=1650080 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=189.1 pwm=0.000
Stats 633.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=283879 bytes_read=219192 bytes_retransmit=9 bytes_invalid=0 send_seq=10224 receive_seq=10224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=0 temp=56.8 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.2  sysload=0.11 cputime=31.122 memavail=1650056 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=188.0 pwm=0.000
Stats 634.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=284035 bytes_read=219564 bytes_retransmit=9 bytes_invalid=0 send_seq=10235 receive_seq=10235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=0 temp=56.8 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=36.6  sysload=0.11 cputime=31.169 memavail=1650260 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=186.9 pwm=0.000
Stats 635.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=284196 bytes_read=219925 bytes_retransmit=9 bytes_invalid=0 send_seq=10247 receive_seq=10247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=0 temp=56.7 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.9  sysload=0.11 cputime=31.216 memavail=1650048 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=185.6 pwm=0.000
Stats 636.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=284371 bytes_read=220272 bytes_retransmit=9 bytes_invalid=0 send_seq=10259 receive_seq=10259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996504 heater_bed: target=0 temp=56.6 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=35.9  sysload=0.10 cputime=31.263 memavail=1650308 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=184.5 pwm=0.000
Stats 637.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=284522 bytes_read=220639 bytes_retransmit=9 bytes_invalid=0 send_seq=10269 receive_seq=10269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996504 heater_bed: target=0 temp=56.6 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=35.5  sysload=0.10 cputime=31.309 memavail=1649692 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=183.5 pwm=0.000
Stats 638.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=284673 bytes_read=221005 bytes_retransmit=9 bytes_invalid=0 send_seq=10279 receive_seq=10279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=0 temp=56.5 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=35.7  sysload=0.10 cputime=31.356 memavail=1650320 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=182.3 pwm=0.000
Stats 639.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=284848 bytes_read=221352 bytes_retransmit=9 bytes_invalid=0 send_seq=10291 receive_seq=10291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=0 temp=56.3 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.5  sysload=0.10 cputime=31.403 memavail=1650408 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=181.2 pwm=0.000
Stats 640.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=284999 bytes_read=221719 bytes_retransmit=9 bytes_invalid=0 send_seq=10301 receive_seq=10301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=56.4 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=35.6  sysload=0.10 cputime=31.448 memavail=1650572 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=180.2 pwm=0.000
Stats 641.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=285155 bytes_read=222075 bytes_retransmit=9 bytes_invalid=0 send_seq=10312 receive_seq=10312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=56.2 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.1  sysload=0.17 cputime=31.493 memavail=1650512 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=178.9 pwm=0.000
Stats 642.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=285320 bytes_read=222422 bytes_retransmit=9 bytes_invalid=0 send_seq=10324 receive_seq=10324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996504 heater_bed: target=0 temp=56.1 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.6  sysload=0.17 cputime=31.526 memavail=1649636 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=177.9 pwm=0.000
Stats 643.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=285481 bytes_read=222814 bytes_retransmit=9 bytes_invalid=0 send_seq=10336 receive_seq=10336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=0 temp=56.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=35.9  sysload=0.17 cputime=31.574 memavail=1649400 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=177.0 pwm=0.000
Stats 644.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=285642 bytes_read=223175 bytes_retransmit=9 bytes_invalid=0 send_seq=10348 receive_seq=10348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=0 temp=55.8 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=35.7  sysload=0.17 cputime=31.620 memavail=1649388 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=175.7 pwm=0.000
Stats 645.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=285817 bytes_read=223522 bytes_retransmit=9 bytes_invalid=0 send_seq=10360 receive_seq=10360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=0 temp=55.6 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.0  sysload=0.17 cputime=31.665 memavail=1649056 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=174.7 pwm=0.000
Stats 646.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=285954 bytes_read=223884 bytes_retransmit=9 bytes_invalid=0 send_seq=10370 receive_seq=10370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=0 temp=55.5 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.2  sysload=0.24 cputime=31.710 memavail=1647848 print_time=611.903 buffer_time=0.000 print_stall=10 extruder: target=0 temp=173.9 pwm=0.000
Starting SD card print (position 0)
Stats 647.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=286543 bytes_read=224274 bytes_retransmit=9 bytes_invalid=0 send_seq=10390 receive_seq=10390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=55.5 pwm=1.000 rpi: temp=52.1 mcu_temp: temp=35.9 sd_pos=860 sysload=0.24 cputime=31.756 memavail=1649124 print_time=655.955 buffer_time=0.000 print_stall=10 extruder: target=220 temp=172.6 pwm=1.000
Heater extruder approaching new target of 220.000
Stats 648.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000063 bytes_write=286746 bytes_read=224626 bytes_retransmit=9 bytes_invalid=0 send_seq=10402 receive_seq=10402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=55.3 pwm=1.000 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=860 sysload=0.24 cputime=31.809 memavail=1649004 print_time=656.956 buffer_time=0.000 print_stall=10 extruder: target=220 temp=171.6 pwm=1.000
Stats 649.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000063 bytes_write=286911 bytes_read=224981 bytes_retransmit=9 bytes_invalid=0 send_seq=10412 receive_seq=10412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=60 temp=55.3 pwm=1.000 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=860 sysload=0.24 cputime=31.863 memavail=1648908 print_time=657.957 buffer_time=0.000 print_stall=10 extruder: target=220 temp=170.8 pwm=1.000
Stats 650.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000063 bytes_write=287062 bytes_read=225329 bytes_retransmit=9 bytes_invalid=0 send_seq=10422 receive_seq=10422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=60 temp=55.3 pwm=1.000 rpi: temp=52.1 mcu_temp: temp=35.9 sd_pos=860 sysload=0.24 cputime=31.914 memavail=1648696 print_time=658.957 buffer_time=0.000 print_stall=10 extruder: target=220 temp=169.9 pwm=1.000
Stats 651.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000063 bytes_write=287269 bytes_read=225686 bytes_retransmit=9 bytes_invalid=0 send_seq=10436 receive_seq=10436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=55.4 pwm=1.000 rpi: temp=51.1 mcu_temp: temp=35.8 sd_pos=860 sysload=0.22 cputime=31.966 memavail=1648860 print_time=659.957 buffer_time=0.000 print_stall=10 extruder: target=220 temp=169.4 pwm=1.000
Stats 652.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000063 bytes_write=287473 bytes_read=226058 bytes_retransmit=9 bytes_invalid=0 send_seq=10447 receive_seq=10447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=55.7 pwm=1.000 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=860 sysload=0.22 cputime=32.002 memavail=1649448 print_time=660.958 buffer_time=0.000 print_stall=10 extruder: target=220 temp=169.0 pwm=1.000
Stats 653.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=287624 bytes_read=226424 bytes_retransmit=9 bytes_invalid=0 send_seq=10457 receive_seq=10457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=55.6 pwm=1.000 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=860 sysload=0.22 cputime=32.050 memavail=1649292 print_time=661.959 buffer_time=0.000 print_stall=10 extruder: target=220 temp=168.8 pwm=1.000
Stats 654.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=287818 bytes_read=226771 bytes_retransmit=9 bytes_invalid=0 send_seq=10469 receive_seq=10469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=56.0 pwm=0.681 rpi: temp=51.1 mcu_temp: temp=35.7 sd_pos=860 sysload=0.22 cputime=32.098 memavail=1648964 print_time=662.960 buffer_time=0.000 print_stall=10 extruder: target=220 temp=168.9 pwm=1.000
Stats 655.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=288028 bytes_read=227153 bytes_retransmit=9 bytes_invalid=0 send_seq=10482 receive_seq=10482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=60 temp=56.2 pwm=1.000 rpi: temp=51.1 mcu_temp: temp=36.4 sd_pos=860 sysload=0.22 cputime=32.146 memavail=1649152 print_time=663.961 buffer_time=0.000 print_stall=10 extruder: target=220 temp=169.0 pwm=1.000
Stats 656.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=288190 bytes_read=227504 bytes_retransmit=9 bytes_invalid=0 send_seq=10492 receive_seq=10492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=60 temp=56.3 pwm=0.848 rpi: temp=51.6 mcu_temp: temp=35.1 sd_pos=860 sysload=0.20 cputime=32.195 memavail=1649208 print_time=664.961 buffer_time=0.000 print_stall=10 extruder: target=220 temp=169.5 pwm=1.000
Stats 657.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=288370 bytes_read=227841 bytes_retransmit=9 bytes_invalid=0 send_seq=10502 receive_seq=10502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=56.5 pwm=0.908 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=860 sysload=0.20 cputime=32.242 memavail=1649208 print_time=665.962 buffer_time=0.000 print_stall=10 extruder: target=220 temp=170.1 pwm=1.000
Stats 658.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=288572 bytes_read=228233 bytes_retransmit=9 bytes_invalid=0 send_seq=10514 receive_seq=10514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=56.6 pwm=0.967 rpi: temp=51.1 mcu_temp: temp=36.0 sd_pos=860 sysload=0.20 cputime=32.293 memavail=1648956 print_time=666.962 buffer_time=0.000 print_stall=10 extruder: target=220 temp=170.6 pwm=1.000
Stats 659.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=288774 bytes_read=228599 bytes_retransmit=9 bytes_invalid=0 send_seq=10527 receive_seq=10527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=56.8 pwm=0.798 rpi: temp=51.1 mcu_temp: temp=36.2 sd_pos=860 sysload=0.20 cputime=32.344 memavail=1648964 print_time=667.963 buffer_time=0.000 print_stall=10 extruder: target=220 temp=171.7 pwm=1.000
Stats 660.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=288982 bytes_read=228946 bytes_retransmit=9 bytes_invalid=0 send_seq=10539 receive_seq=10539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=56.8 pwm=1.000 rpi: temp=50.1 mcu_temp: temp=35.4 sd_pos=860 sysload=0.20 cputime=32.390 memavail=1648964 print_time=668.964 buffer_time=0.000 print_stall=10 extruder: target=220 temp=172.7 pwm=1.000
Stats 661.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=289147 bytes_read=229313 bytes_retransmit=9 bytes_invalid=0 send_seq=10549 receive_seq=10549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=56.8 pwm=1.000 rpi: temp=51.6 mcu_temp: temp=35.4 sd_pos=860 sysload=0.18 cputime=32.440 memavail=1648468 print_time=669.964 buffer_time=0.000 print_stall=10 extruder: target=220 temp=173.6 pwm=1.000
Stats 662.4: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=289349 bytes_read=229679 bytes_retransmit=9 bytes_invalid=0 send_seq=10562 receive_seq=10562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=57.1 pwm=0.647 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=860 sysload=0.18 cputime=32.481 memavail=1648524 print_time=670.964 buffer_time=0.000 print_stall=10 extruder: target=220 temp=175.1 pwm=1.000
Stats 663.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=289543 bytes_read=230041 bytes_retransmit=9 bytes_invalid=0 send_seq=10574 receive_seq=10574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=57.4 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=35.5 sd_pos=860 sysload=0.18 cputime=32.532 memavail=1649028 print_time=671.965 buffer_time=0.000 print_stall=10 extruder: target=220 temp=176.1 pwm=1.000
Stats 664.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=289771 bytes_read=230428 bytes_retransmit=9 bytes_invalid=0 send_seq=10588 receive_seq=10588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=60 temp=57.7 pwm=0.214 rpi: temp=51.6 mcu_temp: temp=35.6 sd_pos=860 sysload=0.18 cputime=32.587 memavail=1649092 print_time=672.965 buffer_time=0.000 print_stall=10 extruder: target=220 temp=177.3 pwm=1.000
Stats 665.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=290019 bytes_read=230804 bytes_retransmit=9 bytes_invalid=0 send_seq=10603 receive_seq=10603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=60 temp=57.9 pwm=0.508 rpi: temp=52.1 mcu_temp: temp=36.2 sd_pos=860 sysload=0.18 cputime=32.639 memavail=1649104 print_time=673.966 buffer_time=0.000 print_stall=10 extruder: target=220 temp=178.9 pwm=1.000
Stats 666.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=290211 bytes_read=231146 bytes_retransmit=9 bytes_invalid=0 send_seq=10614 receive_seq=10614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996506 heater_bed: target=60 temp=58.1 pwm=0.328 rpi: temp=52.1 mcu_temp: temp=36.2 sd_pos=860 sysload=0.17 cputime=32.689 memavail=1648600 print_time=674.967 buffer_time=0.000 print_stall=10 extruder: target=220 temp=180.3 pwm=1.000
Stats 667.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=290583 bytes_read=231562 bytes_retransmit=9 bytes_invalid=0 send_seq=10631 receive_seq=10631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996509 heater_bed: target=60 temp=58.1 pwm=0.915 rpi: temp=52.1 mcu_temp: temp=35.2 sd_pos=860 sysload=0.17 cputime=32.748 memavail=1648852 print_time=675.967 buffer_time=0.000 print_stall=10 extruder: target=220 temp=182.0 pwm=1.000
Stats 668.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=290782 bytes_read=231924 bytes_retransmit=9 bytes_invalid=0 send_seq=10643 receive_seq=10643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=60 temp=58.2 pwm=0.733 rpi: temp=51.1 mcu_temp: temp=35.7 sd_pos=860 sysload=0.17 cputime=32.803 memavail=1648792 print_time=676.968 buffer_time=0.000 print_stall=10 extruder: target=220 temp=183.3 pwm=1.000
Stats 669.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=291009 bytes_read=232276 bytes_retransmit=9 bytes_invalid=0 send_seq=10656 receive_seq=10656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=60 temp=58.2 pwm=0.880 rpi: temp=50.6 mcu_temp: temp=35.4 sd_pos=860 sysload=0.17 cputime=32.858 memavail=1648480 print_time=677.968 buffer_time=0.000 print_stall=10 extruder: target=220 temp=184.7 pwm=1.000
Stats 670.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=291238 bytes_read=232677 bytes_retransmit=9 bytes_invalid=0 send_seq=10670 receive_seq=10670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=60 temp=58.4 pwm=0.728 rpi: temp=52.6 mcu_temp: temp=35.9 sd_pos=860 sysload=0.17 cputime=32.915 memavail=1648736 print_time=678.969 buffer_time=0.000 print_stall=10 extruder: target=220 temp=186.5 pwm=1.000
Stats 671.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=291481 bytes_read=233055 bytes_retransmit=9 bytes_invalid=0 send_seq=10686 receive_seq=10686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996508 heater_bed: target=60 temp=58.5 pwm=0.784 rpi: temp=51.1 mcu_temp: temp=35.1 sd_pos=860 sysload=0.16 cputime=32.958 memavail=1648544 print_time=679.969 buffer_time=0.000 print_stall=10 extruder: target=220 temp=187.9 pwm=1.000
Stats 672.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000016 mcu_task_stddev=0.000045 bytes_write=291729 bytes_read=233417 bytes_retransmit=9 bytes_invalid=0 send_seq=10701 receive_seq=10701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=60 temp=58.7 pwm=0.516 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=860 sysload=0.16 cputime=32.997 memavail=1648744 print_time=680.970 buffer_time=0.000 print_stall=10 extruder: target=220 temp=189.4 pwm=1.000
Stats 673.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=291980 bytes_read=233838 bytes_retransmit=9 bytes_invalid=0 send_seq=10716 receive_seq=10716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=60 temp=58.8 pwm=0.742 rpi: temp=51.6 mcu_temp: temp=36.4 sd_pos=860 sysload=0.16 cputime=33.054 memavail=1648744 print_time=681.971 buffer_time=0.000 print_stall=10 extruder: target=220 temp=191.2 pwm=1.000
Stats 674.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=292201 bytes_read=234195 bytes_retransmit=9 bytes_invalid=0 send_seq=10730 receive_seq=10730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=59.0 pwm=0.454 rpi: temp=52.1 mcu_temp: temp=35.4 sd_pos=860 sysload=0.16 cputime=33.103 memavail=1648736 print_time=682.971 buffer_time=0.000 print_stall=10 extruder: target=220 temp=192.7 pwm=1.000
Stats 675.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=292409 bytes_read=234542 bytes_retransmit=9 bytes_invalid=0 send_seq=10742 receive_seq=10742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=60 temp=58.9 pwm=0.829 rpi: temp=51.1 mcu_temp: temp=35.4 sd_pos=860 sysload=0.16 cputime=33.155 memavail=1649056 print_time=683.971 buffer_time=0.000 print_stall=10 extruder: target=220 temp=193.8 pwm=1.000
Stats 676.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=292651 bytes_read=234948 bytes_retransmit=9 bytes_invalid=0 send_seq=10757 receive_seq=10757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=60 temp=59.0 pwm=1.000 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=860 sysload=0.16 cputime=33.212 memavail=1648996 print_time=684.972 buffer_time=0.000 print_stall=10 extruder: target=220 temp=195.8 pwm=1.000
Stats 677.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=292867 bytes_read=235300 bytes_retransmit=9 bytes_invalid=0 send_seq=10770 receive_seq=10770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=60 temp=59.1 pwm=0.890 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=860 sysload=0.14 cputime=33.254 memavail=1648752 print_time=685.973 buffer_time=0.000 print_stall=10 extruder: target=220 temp=197.3 pwm=1.000
Stats 678.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=293077 bytes_read=235662 bytes_retransmit=9 bytes_invalid=0 send_seq=10782 receive_seq=10782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=59.3 pwm=0.307 rpi: temp=52.1 mcu_temp: temp=35.3 sd_pos=891 sysload=0.14 cputime=33.299 memavail=1648696 print_time=686.973 buffer_time=0.000 print_stall=10 extruder: target=220 temp=198.9 pwm=1.000
Stats 679.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=293289 bytes_read=236063 bytes_retransmit=9 bytes_invalid=0 send_seq=10796 receive_seq=10796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996505 heater_bed: target=60 temp=59.7 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.2 sd_pos=891 sysload=0.14 cputime=33.355 memavail=1647688 print_time=687.974 buffer_time=0.000 print_stall=10 extruder: target=220 temp=200.6 pwm=1.000
Stats 680.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=293559 bytes_read=236425 bytes_retransmit=9 bytes_invalid=0 send_seq=10811 receive_seq=10811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=59.7 pwm=0.289 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=891 sysload=0.14 cputime=33.412 memavail=1647696 print_time=688.975 buffer_time=0.000 print_stall=10 extruder: target=220 temp=202.3 pwm=1.000
Stats 681.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=293772 bytes_read=236777 bytes_retransmit=9 bytes_invalid=0 send_seq=10824 receive_seq=10824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=59.7 pwm=0.501 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=891 sysload=0.14 cputime=33.467 memavail=1647696 print_time=689.976 buffer_time=0.000 print_stall=10 extruder: target=220 temp=203.6 pwm=1.000
Stats 682.4: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=294026 bytes_read=237178 bytes_retransmit=9 bytes_invalid=0 send_seq=10838 receive_seq=10838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=59.8 pwm=0.445 rpi: temp=51.1 mcu_temp: temp=35.6 sd_pos=891 sysload=0.13 cputime=33.507 memavail=1647216 print_time=690.976 buffer_time=0.000 print_stall=10 extruder: target=220 temp=205.5 pwm=0.917
Stats 683.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=294274 bytes_read=237555 bytes_retransmit=9 bytes_invalid=0 send_seq=10853 receive_seq=10853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=59.8 pwm=0.434 rpi: temp=53.1 mcu_temp: temp=36.2 sd_pos=891 sysload=0.13 cputime=33.544 memavail=1646412 print_time=691.977 buffer_time=0.000 print_stall=10 extruder: target=220 temp=206.8 pwm=0.842
Stats 684.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=294519 bytes_read=237932 bytes_retransmit=9 bytes_invalid=0 send_seq=10868 receive_seq=10868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=59.8 pwm=0.710 rpi: temp=52.1 mcu_temp: temp=35.8 sd_pos=891 sysload=0.13 cputime=33.598 memavail=1646440 print_time=692.977 buffer_time=0.000 print_stall=10 extruder: target=220 temp=208.3 pwm=0.724
Stats 685.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=294767 bytes_read=238323 bytes_retransmit=9 bytes_invalid=0 send_seq=10883 receive_seq=10883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=59.9 pwm=0.497 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=891 sysload=0.13 cputime=33.655 memavail=1645936 print_time=693.977 buffer_time=0.000 print_stall=10 extruder: target=220 temp=210.0 pwm=0.667
Stats 686.4: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=294952 bytes_read=238665 bytes_retransmit=9 bytes_invalid=0 send_seq=10894 receive_seq=10894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=59.9 pwm=0.623 rpi: temp=51.1 mcu_temp: temp=35.7 sd_pos=891 sysload=0.13 cputime=33.711 memavail=1645988 print_time=694.978 buffer_time=0.000 print_stall=10 extruder: target=220 temp=211.3 pwm=0.667
Stats 687.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=295184 bytes_read=239037 bytes_retransmit=9 bytes_invalid=0 send_seq=10908 receive_seq=10908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996501 heater_bed: target=60 temp=59.9 pwm=0.649 rpi: temp=51.1 mcu_temp: temp=35.8 sd_pos=891 sysload=0.12 cputime=33.767 memavail=1646048 print_time=695.978 buffer_time=0.000 print_stall=10 extruder: target=220 temp=212.5 pwm=0.577
Stats 688.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=295408 bytes_read=239433 bytes_retransmit=9 bytes_invalid=0 send_seq=10921 receive_seq=10921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=59.9 pwm=0.551 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.12 cputime=33.824 memavail=1645544 print_time=696.979 buffer_time=0.000 print_stall=10 extruder: target=220 temp=214.1 pwm=0.462
Stats 689.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=295663 bytes_read=239805 bytes_retransmit=9 bytes_invalid=0 send_seq=10938 receive_seq=10938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996502 heater_bed: target=60 temp=60.0 pwm=0.310 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.12 cputime=33.875 memavail=1645556 print_time=697.979 buffer_time=0.000 print_stall=10 extruder: target=220 temp=215.0 pwm=0.505
Stats 690.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=295913 bytes_read=240187 bytes_retransmit=9 bytes_invalid=0 send_seq=10954 receive_seq=10954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=60.1 pwm=0.397 rpi: temp=51.1 mcu_temp: temp=35.6 sd_pos=891 sysload=0.12 cputime=33.929 memavail=1645304 print_time=698.980 buffer_time=0.000 print_stall=10 extruder: target=220 temp=216.0 pwm=0.538
Heater extruder within range of 220.000
Stats 691.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=296174 bytes_read=240583 bytes_retransmit=9 bytes_invalid=0 send_seq=10970 receive_seq=10970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.2 pwm=0.227 rpi: temp=52.1 mcu_temp: temp=35.9 sd_pos=891 sysload=0.12 cputime=33.986 memavail=1645268 print_time=699.981 buffer_time=0.000 print_stall=10 extruder: target=220 temp=217.3 pwm=0.488
Stats 692.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=296444 bytes_read=240960 bytes_retransmit=9 bytes_invalid=0 send_seq=10988 receive_seq=10988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=60.2 pwm=0.202 rpi: temp=51.1 mcu_temp: temp=36.5 sd_pos=891 sysload=0.11 cputime=34.030 memavail=1644444 print_time=700.981 buffer_time=0.000 print_stall=10 extruder: target=220 temp=217.9 pwm=0.554
Stats 693.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=296818 bytes_read=241372 bytes_retransmit=9 bytes_invalid=0 send_seq=11007 receive_seq=11007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=60.2 pwm=0.677 rpi: temp=53.1 mcu_temp: temp=35.4 sd_pos=891 sysload=0.11 cputime=34.074 memavail=1642884 print_time=701.981 buffer_time=0.000 print_stall=10 extruder: target=220 temp=218.6 pwm=0.485
Stats 694.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=297096 bytes_read=241773 bytes_retransmit=9 bytes_invalid=0 send_seq=11024 receive_seq=11024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.3 pwm=0.436 rpi: temp=51.6 mcu_temp: temp=35.5 sd_pos=891 sysload=0.11 cputime=34.117 memavail=1641936 print_time=702.982 buffer_time=0.000 print_stall=10 extruder: target=220 temp=219.5 pwm=0.452
Stats 695.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=297356 bytes_read=242135 bytes_retransmit=9 bytes_invalid=0 send_seq=11039 receive_seq=11039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.4 pwm=0.244 rpi: temp=52.1 mcu_temp: temp=36.0 sd_pos=891 sysload=0.11 cputime=34.175 memavail=1642248 print_time=703.983 buffer_time=0.000 print_stall=10 extruder: target=220 temp=219.9 pwm=0.469
Stats 696.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=297554 bytes_read=242502 bytes_retransmit=9 bytes_invalid=0 send_seq=11052 receive_seq=11052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.2 pwm=0.928 rpi: temp=50.6 mcu_temp: temp=35.7 sd_pos=891 sysload=0.11 cputime=34.231 memavail=1642248 print_time=704.984 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.4 pwm=0.469
Stats 697.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=297800 bytes_read=242898 bytes_retransmit=9 bytes_invalid=0 send_seq=11068 receive_seq=11068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.4 pwm=0.479 rpi: temp=51.6 mcu_temp: temp=35.5 sd_pos=891 sysload=0.10 cputime=34.288 memavail=1641996 print_time=705.984 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.7 pwm=0.576
Stats 698.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=298064 bytes_read=243285 bytes_retransmit=9 bytes_invalid=0 send_seq=11085 receive_seq=11085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.6 pwm=0.031 rpi: temp=51.1 mcu_temp: temp=35.8 sd_pos=891 sysload=0.10 cputime=34.344 memavail=1641976 print_time=706.985 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.0 pwm=0.593
Stats 699.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=298286 bytes_read=243657 bytes_retransmit=9 bytes_invalid=0 send_seq=11099 receive_seq=11099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.6 pwm=0.318 rpi: temp=52.1 mcu_temp: temp=35.4 sd_pos=891 sysload=0.10 cputime=34.399 memavail=1642000 print_time=707.985 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.4 pwm=0.428
Stats 700.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=298560 bytes_read=244058 bytes_retransmit=9 bytes_invalid=0 send_seq=11116 receive_seq=11116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.5 pwm=0.556 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.10 cputime=34.457 memavail=1641992 print_time=708.985 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.6 pwm=0.515
Stats 701.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=298778 bytes_read=244415 bytes_retransmit=9 bytes_invalid=0 send_seq=11130 receive_seq=11130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.5 pwm=0.482 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=891 sysload=0.10 cputime=34.511 memavail=1642268 print_time=709.986 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.0 pwm=0.397
Stats 702.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=299008 bytes_read=244792 bytes_retransmit=9 bytes_invalid=0 send_seq=11145 receive_seq=11145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.7 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.09 cputime=34.563 memavail=1642456 print_time=710.986 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.1 pwm=0.466
Stats 703.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=299363 bytes_read=245203 bytes_retransmit=9 bytes_invalid=0 send_seq=11161 receive_seq=11161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=60.6 pwm=0.614 rpi: temp=51.1 mcu_temp: temp=35.5 sd_pos=891 sysload=0.09 cputime=34.606 memavail=1642204 print_time=711.987 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.3 pwm=0.526
Stats 704.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=299562 bytes_read=245555 bytes_retransmit=9 bytes_invalid=0 send_seq=11174 receive_seq=11174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.7 pwm=0.373 rpi: temp=51.6 mcu_temp: temp=35.6 sd_pos=891 sysload=0.09 cputime=34.660 memavail=1642204 print_time=712.987 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.6 pwm=0.426
Stats 705.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=299815 bytes_read=245932 bytes_retransmit=9 bytes_invalid=0 send_seq=11189 receive_seq=11189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.8 pwm=0.231 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.09 cputime=34.714 memavail=1641952 print_time=713.988 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.7 pwm=0.380
Stats 706.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=300030 bytes_read=246308 bytes_retransmit=9 bytes_invalid=0 send_seq=11203 receive_seq=11203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=60.7 pwm=0.516 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.09 cputime=34.768 memavail=1641952 print_time=714.989 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.7 pwm=0.458
Stats 707.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=300295 bytes_read=246670 bytes_retransmit=9 bytes_invalid=0 send_seq=11220 receive_seq=11220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.8 pwm=0.321 rpi: temp=51.6 mcu_temp: temp=35.5 sd_pos=891 sysload=0.09 cputime=34.821 memavail=1641960 print_time=715.989 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.9 pwm=0.393
Stats 708.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=300499 bytes_read=247036 bytes_retransmit=9 bytes_invalid=0 send_seq=11232 receive_seq=11232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.8 pwm=0.283 rpi: temp=51.1 mcu_temp: temp=35.5 sd_pos=891 sysload=0.09 cputime=34.876 memavail=1641960 print_time=716.989 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.9 pwm=0.474
Stats 709.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=300703 bytes_read=247403 bytes_retransmit=9 bytes_invalid=0 send_seq=11244 receive_seq=11244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.9 pwm=0.151 rpi: temp=51.6 mcu_temp: temp=36.2 sd_pos=891 sysload=0.09 cputime=34.930 memavail=1641708 print_time=717.992 buffer_time=0.000 print_stall=10 extruder: target=220 temp=223.1 pwm=0.332
Stats 710.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=300934 bytes_read=247765 bytes_retransmit=9 bytes_invalid=0 send_seq=11259 receive_seq=11259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.8 pwm=0.296 rpi: temp=50.6 mcu_temp: temp=35.5 sd_pos=891 sysload=0.09 cputime=34.981 memavail=1641712 print_time=718.990 buffer_time=0.000 print_stall=10 extruder: target=220 temp=223.0 pwm=0.487
Stats 711.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=301158 bytes_read=248137 bytes_retransmit=9 bytes_invalid=0 send_seq=11273 receive_seq=11273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=60.7 pwm=0.767 rpi: temp=51.6 mcu_temp: temp=35.6 sd_pos=891 sysload=0.09 cputime=35.036 memavail=1641960 print_time=719.991 buffer_time=0.000 print_stall=10 extruder: target=220 temp=223.1 pwm=0.387
Stats 712.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=301401 bytes_read=248533 bytes_retransmit=9 bytes_invalid=0 send_seq=11289 receive_seq=11289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.8 pwm=0.525 rpi: temp=51.6 mcu_temp: temp=35.6 sd_pos=891 sysload=0.08 cputime=35.093 memavail=1642220 print_time=720.992 buffer_time=0.000 print_stall=10 extruder: target=220 temp=223.0 pwm=0.396
Stats 713.5: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=301611 bytes_read=248900 bytes_retransmit=9 bytes_invalid=0 send_seq=11302 receive_seq=11302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.8 pwm=0.569 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=891 sysload=0.08 cputime=35.145 memavail=1642208 print_time=721.993 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.9 pwm=0.521
Stats 714.5: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=301836 bytes_read=249254 bytes_retransmit=9 bytes_invalid=0 send_seq=11316 receive_seq=11316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=60.9 pwm=0.129 rpi: temp=50.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.08 cputime=35.198 memavail=1642080 print_time=722.993 buffer_time=0.000 print_stall=10 extruder: target=220 temp=223.0 pwm=0.357
Stats 715.5: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=302025 bytes_read=249625 bytes_retransmit=9 bytes_invalid=0 send_seq=11327 receive_seq=11327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.8 pwm=0.345 rpi: temp=52.1 mcu_temp: temp=36.3 sd_pos=891 sysload=0.08 cputime=35.251 memavail=1642140 print_time=723.994 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.9 pwm=0.479
Stats 716.5: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=302237 bytes_read=249982 bytes_retransmit=9 bytes_invalid=0 send_seq=11341 receive_seq=11341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.9 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=35.5 sd_pos=891 sysload=0.08 cputime=35.303 memavail=1642148 print_time=724.994 buffer_time=0.000 print_stall=10 extruder: target=220 temp=223.0 pwm=0.390
Stats 717.5: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=302463 bytes_read=250354 bytes_retransmit=9 bytes_invalid=0 send_seq=11355 receive_seq=11355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.9 pwm=0.233 rpi: temp=51.1 mcu_temp: temp=35.9 sd_pos=891 sysload=0.07 cputime=35.358 memavail=1642088 print_time=725.995 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.8 pwm=0.479
Stats 718.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=302693 bytes_read=250755 bytes_retransmit=9 bytes_invalid=0 send_seq=11370 receive_seq=11369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.9 pwm=0.234 rpi: temp=50.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.07 cputime=35.412 memavail=1642152 print_time=726.995 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.8 pwm=0.435
Stats 719.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=302893 bytes_read=251094 bytes_retransmit=9 bytes_invalid=0 send_seq=11383 receive_seq=11383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.9 pwm=0.184 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.07 cputime=35.463 memavail=1642160 print_time=727.996 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.6 pwm=0.506
Stats 720.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=303119 bytes_read=251466 bytes_retransmit=9 bytes_invalid=0 send_seq=11397 receive_seq=11397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.9 pwm=0.243 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.07 cputime=35.517 memavail=1642044 print_time=728.997 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.6 pwm=0.409
Stats 721.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=303377 bytes_read=251862 bytes_retransmit=9 bytes_invalid=0 send_seq=11413 receive_seq=11413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.7 pwm=0.799 rpi: temp=51.1 mcu_temp: temp=36.0 sd_pos=891 sysload=0.07 cputime=35.570 memavail=1641816 print_time=729.998 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.6 pwm=0.362
Stats 722.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=303627 bytes_read=252219 bytes_retransmit=9 bytes_invalid=0 send_seq=11427 receive_seq=11427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.8 pwm=0.644 rpi: temp=52.1 mcu_temp: temp=35.9 sd_pos=891 sysload=0.07 cputime=35.625 memavail=1641840 print_time=730.998 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.3 pwm=0.539
Stats 723.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=303845 bytes_read=252601 bytes_retransmit=9 bytes_invalid=0 send_seq=11440 receive_seq=11440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=61.0 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.07 cputime=35.680 memavail=1641852 print_time=731.998 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.3 pwm=0.480
Stats 724.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=304059 bytes_read=252987 bytes_retransmit=9 bytes_invalid=0 send_seq=11454 receive_seq=11454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.9 pwm=0.193 rpi: temp=51.1 mcu_temp: temp=35.6 sd_pos=891 sysload=0.07 cputime=35.732 memavail=1641812 print_time=732.999 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.3 pwm=0.421
Stats 725.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=304253 bytes_read=253316 bytes_retransmit=9 bytes_invalid=0 send_seq=11466 receive_seq=11466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.9 pwm=0.212 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=891 sysload=0.07 cputime=35.786 memavail=1641952 print_time=733.999 buffer_time=0.000 print_stall=10 extruder: target=220 temp=222.0 pwm=0.474
Stats 726.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=304478 bytes_read=253688 bytes_retransmit=9 bytes_invalid=0 send_seq=11480 receive_seq=11480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.9 pwm=0.378 rpi: temp=50.6 mcu_temp: temp=35.4 sd_pos=891 sysload=0.07 cputime=35.841 memavail=1641896 print_time=735.000 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.9 pwm=0.529
Stats 727.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=304850 bytes_read=254089 bytes_retransmit=9 bytes_invalid=0 send_seq=11497 receive_seq=11497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.9 pwm=0.349 rpi: temp=50.6 mcu_temp: temp=35.7 sd_pos=891 sysload=0.06 cputime=35.897 memavail=1641644 print_time=736.000 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.9 pwm=0.483
Stats 728.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=305048 bytes_read=254451 bytes_retransmit=9 bytes_invalid=0 send_seq=11509 receive_seq=11509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.9 pwm=0.245 rpi: temp=51.1 mcu_temp: temp=35.8 sd_pos=891 sysload=0.06 cputime=35.950 memavail=1641644 print_time=737.001 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.8 pwm=0.472
Stats 729.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=305267 bytes_read=254818 bytes_retransmit=9 bytes_invalid=0 send_seq=11522 receive_seq=11522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.9 pwm=0.193 rpi: temp=51.1 mcu_temp: temp=35.7 sd_pos=891 sysload=0.06 cputime=36.001 memavail=1641644 print_time=738.001 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.9 pwm=0.372
Stats 730.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=305493 bytes_read=255186 bytes_retransmit=9 bytes_invalid=0 send_seq=11536 receive_seq=11536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.9 pwm=0.268 rpi: temp=52.1 mcu_temp: temp=35.8 sd_pos=891 sysload=0.06 cputime=36.053 memavail=1641400 print_time=739.002 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.6 pwm=0.501
Stats 731.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=305702 bytes_read=255538 bytes_retransmit=9 bytes_invalid=0 send_seq=11549 receive_seq=11549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.9 pwm=0.380 rpi: temp=50.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.06 cputime=36.106 memavail=1641460 print_time=740.002 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.4 pwm=0.567
Stats 732.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=305940 bytes_read=255910 bytes_retransmit=9 bytes_invalid=0 send_seq=11563 receive_seq=11563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.9 pwm=0.176 rpi: temp=51.1 mcu_temp: temp=35.9 sd_pos=891 sysload=0.06 cputime=36.148 memavail=1641140 print_time=741.003 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.4 pwm=0.534
Stats 733.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=306147 bytes_read=256306 bytes_retransmit=9 bytes_invalid=0 send_seq=11577 receive_seq=11576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.9 pwm=0.378 rpi: temp=50.6 mcu_temp: temp=35.6 sd_pos=891 sysload=0.06 cputime=36.202 memavail=1641392 print_time=742.004 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.4 pwm=0.483
Stats 734.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=306372 bytes_read=256661 bytes_retransmit=9 bytes_invalid=0 send_seq=11591 receive_seq=11591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.8 pwm=0.381 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=891 sysload=0.06 cputime=36.256 memavail=1641512 print_time=743.005 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.3 pwm=0.463
Stats 735.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=306582 bytes_read=257043 bytes_retransmit=9 bytes_invalid=0 send_seq=11604 receive_seq=11604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.9 pwm=0.222 rpi: temp=51.1 mcu_temp: temp=35.8 sd_pos=891 sysload=0.06 cputime=36.309 memavail=1641764 print_time=744.005 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.2 pwm=0.497
Stats 736.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=306823 bytes_read=257419 bytes_retransmit=9 bytes_invalid=0 send_seq=11619 receive_seq=11619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.9 pwm=0.157 rpi: temp=51.1 mcu_temp: temp=35.9 sd_pos=891 sysload=0.06 cputime=36.364 memavail=1641964 print_time=745.006 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.1 pwm=0.551
Stats 737.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=307064 bytes_read=257776 bytes_retransmit=9 bytes_invalid=0 send_seq=11634 receive_seq=11633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.9 pwm=0.166 rpi: temp=51.1 mcu_temp: temp=35.5 sd_pos=891 sysload=0.05 cputime=36.418 memavail=1641964 print_time=746.007 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.1 pwm=0.468
Stats 738.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=307275 bytes_read=258178 bytes_retransmit=9 bytes_invalid=0 send_seq=11647 receive_seq=11647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.8 pwm=0.365 rpi: temp=50.1 mcu_temp: temp=35.7 sd_pos=891 sysload=0.05 cputime=36.468 memavail=1641728 print_time=747.011 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.3 pwm=0.328
Stats 739.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=307509 bytes_read=258531 bytes_retransmit=9 bytes_invalid=0 send_seq=11661 receive_seq=11661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.9 pwm=0.359 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=891 sysload=0.05 cputime=36.524 memavail=1641728 print_time=748.011 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.9 pwm=0.507
Stats 740.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=307734 bytes_read=258888 bytes_retransmit=9 bytes_invalid=0 send_seq=11675 receive_seq=11675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.9 pwm=0.284 rpi: temp=51.1 mcu_temp: temp=35.9 sd_pos=891 sysload=0.05 cputime=36.580 memavail=1641980 print_time=749.012 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.0 pwm=0.451
Stats 741.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=308296 bytes_read=259425 bytes_retransmit=9 bytes_invalid=0 send_seq=11705 receive_seq=11705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.8 pwm=0.229 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=928 sysload=0.05 cputime=36.650 memavail=1641984 print_time=750.670 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.8 pwm=0.540
Stats 742.5: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=308868 bytes_read=260061 bytes_retransmit=9 bytes_invalid=0 send_seq=11744 receive_seq=11744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.8 pwm=0.434 rpi: temp=51.6 mcu_temp: temp=36.2 sd_pos=928 sysload=0.13 cputime=36.718 memavail=1642792 print_time=751.670 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.8 pwm=0.539
Stats 743.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=309653 bytes_read=260732 bytes_retransmit=9 bytes_invalid=0 send_seq=11786 receive_seq=11786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.7 pwm=0.460 rpi: temp=51.6 mcu_temp: temp=36.2 sd_pos=928 sysload=0.13 cputime=36.789 memavail=1642540 print_time=752.672 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.9 pwm=0.458
Stats 744.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=310426 bytes_read=261480 bytes_retransmit=9 bytes_invalid=0 send_seq=11833 receive_seq=11832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.6 pwm=0.611 rpi: temp=52.1 mcu_temp: temp=35.6 sd_pos=928 sysload=0.13 cputime=36.872 memavail=1642288 print_time=753.707 buffer_time=0.000 print_stall=10 extruder: target=220 temp=221.0 pwm=0.383
Stats 745.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=311012 bytes_read=262126 bytes_retransmit=9 bytes_invalid=0 send_seq=11873 receive_seq=11873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.5 pwm=0.721 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=928 sysload=0.13 cputime=36.941 memavail=1642480 print_time=754.707 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.7 pwm=0.499
Stats 746.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=311561 bytes_read=262738 bytes_retransmit=9 bytes_invalid=0 send_seq=11910 receive_seq=11910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.5 pwm=0.470 rpi: temp=51.6 mcu_temp: temp=36.0 sd_pos=928 sysload=0.13 cputime=37.009 memavail=1642228 print_time=755.707 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.7 pwm=0.446
Stats 747.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=312125 bytes_read=263395 bytes_retransmit=9 bytes_invalid=0 send_seq=11950 receive_seq=11950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.5 pwm=0.535 rpi: temp=51.1 mcu_temp: temp=35.9 sd_pos=928 sysload=0.20 cputime=37.053 memavail=1636320 print_time=756.707 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.7 pwm=0.446
Stats 748.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=313285 bytes_read=264128 bytes_retransmit=9 bytes_invalid=0 send_seq=11995 receive_seq=11995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=8 freq=71996491 heater_bed: target=60 temp=60.3 pwm=0.735 rpi: temp=51.6 mcu_temp: temp=36.0 sd_pos=928 sysload=0.20 cputime=37.119 memavail=1640748 print_time=761.752 buffer_time=4.236 print_stall=10 extruder: target=220 temp=220.4 pwm=0.603
Stats 749.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=313563 bytes_read=264490 bytes_retransmit=9 bytes_invalid=0 send_seq=12010 receive_seq=12010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996493 heater_bed: target=60 temp=60.5 pwm=0.230 rpi: temp=51.6 mcu_temp: temp=36.0 sd_pos=928 sysload=0.20 cputime=37.155 memavail=1641400 print_time=761.752 buffer_time=3.235 print_stall=10 extruder: target=220 temp=220.5 pwm=0.454
Stats 750.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=313787 bytes_read=264872 bytes_retransmit=9 bytes_invalid=0 send_seq=12023 receive_seq=12023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=8 freq=71996492 heater_bed: target=60 temp=60.5 pwm=0.316 rpi: temp=52.1 mcu_temp: temp=36.0 sd_pos=928 sysload=0.20 cputime=37.190 memavail=1641396 print_time=761.752 buffer_time=2.234 print_stall=10 extruder: target=220 temp=220.6 pwm=0.454
Stats 751.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=314079 bytes_read=265243 bytes_retransmit=9 bytes_invalid=0 send_seq=12037 receive_seq=12037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=8 freq=71996490 heater_bed: target=60 temp=60.5 pwm=0.551 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=928 sysload=0.20 cputime=37.231 memavail=1641204 print_time=761.754 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.4 pwm=0.571
Stats 752.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=314309 bytes_read=265600 bytes_retransmit=9 bytes_invalid=0 send_seq=12051 receive_seq=12051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.7 pwm=0.026 rpi: temp=52.6 mcu_temp: temp=36.2 sd_pos=928 sysload=0.26 cputime=37.281 memavail=1641960 print_time=761.754 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.3 pwm=0.572
Stats 753.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=314910 bytes_read=266229 bytes_retransmit=9 bytes_invalid=0 send_seq=12088 receive_seq=12088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.7 pwm=0.248 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=928 sysload=0.26 cputime=37.349 memavail=1642212 print_time=762.704 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.4 pwm=0.495
Stats 754.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=315592 bytes_read=266870 bytes_retransmit=9 bytes_invalid=0 send_seq=12127 receive_seq=12127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=18 freq=71996489 heater_bed: target=60 temp=60.7 pwm=0.209 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=928 sysload=0.26 cputime=37.424 memavail=1642716 print_time=766.361 buffer_time=2.837 print_stall=10 extruder: target=220 temp=220.2 pwm=0.550
Stats 755.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=315858 bytes_read=267222 bytes_retransmit=9 bytes_invalid=0 send_seq=12140 receive_seq=12140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=8 freq=71996488 heater_bed: target=60 temp=60.6 pwm=0.472 rpi: temp=52.1 mcu_temp: temp=36.0 sd_pos=928 sysload=0.26 cputime=37.479 memavail=1642460 print_time=766.363 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.2 pwm=0.495
Stats 756.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=316088 bytes_read=267609 bytes_retransmit=9 bytes_invalid=0 send_seq=12154 receive_seq=12154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.6 pwm=0.538 rpi: temp=51.6 mcu_temp: temp=36.0 sd_pos=928 sysload=0.26 cputime=37.531 memavail=1642464 print_time=766.363 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.2 pwm=0.527
Stats 757.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=316445 bytes_read=268038 bytes_retransmit=9 bytes_invalid=0 send_seq=12174 receive_seq=12174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.6 pwm=0.178 rpi: temp=50.1 mcu_temp: temp=36.1 sd_pos=928 sysload=0.32 cputime=37.588 memavail=1642460 print_time=766.713 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.2 pwm=0.452
Stats 758.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=317001 bytes_read=268670 bytes_retransmit=9 bytes_invalid=0 send_seq=12212 receive_seq=12212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.6 pwm=0.263 rpi: temp=51.1 mcu_temp: temp=35.6 sd_pos=928 sysload=0.32 cputime=37.656 memavail=1642460 print_time=767.713 buffer_time=0.000 print_stall=10 extruder: target=220 temp=220.1 pwm=0.504
Stats 759.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=317717 bytes_read=269408 bytes_retransmit=9 bytes_invalid=0 send_seq=12256 receive_seq=12256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=18 freq=71996486 heater_bed: target=60 temp=60.5 pwm=0.570 rpi: temp=51.1 mcu_temp: temp=35.6 sd_pos=928 sysload=0.32 cputime=37.735 memavail=1642720 print_time=770.913 buffer_time=2.385 print_stall=10 extruder: target=220 temp=220.1 pwm=0.547
Stats 760.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=318254 bytes_read=269804 bytes_retransmit=9 bytes_invalid=0 send_seq=12275 receive_seq=12275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.5 pwm=0.349 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=928 sysload=0.32 cputime=37.788 memavail=1642980 print_time=772.980 buffer_time=3.450 print_stall=10 extruder: target=220 temp=220.1 pwm=0.541
Stats 761.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=318490 bytes_read=270161 bytes_retransmit=9 bytes_invalid=0 send_seq=12289 receive_seq=12289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.5 pwm=0.449 rpi: temp=51.6 mcu_temp: temp=35.5 sd_pos=928 sysload=0.32 cputime=37.843 memavail=1642480 print_time=772.980 buffer_time=2.448 print_stall=10 extruder: target=220 temp=220.0 pwm=0.607
Stats 762.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=319071 bytes_read=270573 bytes_retransmit=9 bytes_invalid=0 send_seq=12308 receive_seq=12308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.5 pwm=0.456 rpi: temp=50.6 mcu_temp: temp=35.8 sd_pos=928 sysload=0.30 cputime=37.904 memavail=1642164 print_time=775.200 buffer_time=3.666 print_stall=10 extruder: target=220 temp=220.2 pwm=0.500
Stats 763.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=319301 bytes_read=270964 bytes_retransmit=9 bytes_invalid=0 send_seq=12323 receive_seq=12323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.5 pwm=0.362 rpi: temp=50.6 mcu_temp: temp=35.9 sd_pos=928 sysload=0.30 cputime=37.958 memavail=1642164 print_time=775.200 buffer_time=2.665 print_stall=10 extruder: target=220 temp=220.0 pwm=0.510
Stats 764.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=319602 bytes_read=271321 bytes_retransmit=9 bytes_invalid=0 send_seq=12337 receive_seq=12337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=60.5 pwm=0.309 rpi: temp=51.6 mcu_temp: temp=36.5 sd_pos=928 sysload=0.30 cputime=38.013 memavail=1641600 print_time=775.900 buffer_time=2.364 print_stall=10 extruder: target=220 temp=220.3 pwm=0.413
Stats 765.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=320121 bytes_read=271725 bytes_retransmit=9 bytes_invalid=0 send_seq=12355 receive_seq=12355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.5 pwm=0.401 rpi: temp=51.6 mcu_temp: temp=36.2 sd_pos=928 sysload=0.30 cputime=38.072 memavail=1641552 print_time=776.565 buffer_time=2.027 print_stall=10 extruder: target=220 temp=220.3 pwm=0.390
Stats 766.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=320585 bytes_read=272100 bytes_retransmit=9 bytes_invalid=0 send_seq=12372 receive_seq=12372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.4 pwm=0.423 rpi: temp=51.6 mcu_temp: temp=35.6 sd_pos=928 sysload=0.30 cputime=38.130 memavail=1641556 print_time=777.974 buffer_time=2.435 print_stall=10 extruder: target=220 temp=220.2 pwm=0.494
Stats 767.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=320921 bytes_read=272457 bytes_retransmit=9 bytes_invalid=0 send_seq=12388 receive_seq=12388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.5 pwm=0.187 rpi: temp=51.6 mcu_temp: temp=36.4 sd_pos=928 sysload=0.27 cputime=38.186 memavail=1641556 print_time=778.774 buffer_time=2.234 print_stall=10 extruder: target=220 temp=220.0 pwm=0.594
Stats 768.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=321352 bytes_read=272867 bytes_retransmit=9 bytes_invalid=0 send_seq=12406 receive_seq=12406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.4 pwm=0.387 rpi: temp=51.6 mcu_temp: temp=35.7 sd_pos=928 sysload=0.27 cputime=38.245 memavail=1641500 print_time=781.374 buffer_time=3.833 print_stall=10 extruder: target=220 temp=220.0 pwm=0.506
Stats 769.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=321583 bytes_read=273238 bytes_retransmit=9 bytes_invalid=0 send_seq=12421 receive_seq=12421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.3 pwm=0.568 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=928 sysload=0.27 cputime=38.298 memavail=1641560 print_time=781.374 buffer_time=2.831 print_stall=10 extruder: target=220 temp=220.3 pwm=0.387
Stats 770.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=321903 bytes_read=273610 bytes_retransmit=9 bytes_invalid=0 send_seq=12438 receive_seq=12438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=60.3 pwm=0.106 rpi: temp=50.6 mcu_temp: temp=36.0 sd_pos=928 sysload=0.27 cputime=38.355 memavail=1641500 print_time=781.974 buffer_time=2.428 print_stall=10 extruder: target=220 temp=220.0 pwm=0.539
Stats 771.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=322320 bytes_read=274007 bytes_retransmit=9 bytes_invalid=0 send_seq=12454 receive_seq=12454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.4 pwm=0.117 rpi: temp=51.1 mcu_temp: temp=35.8 sd_pos=928 sysload=0.27 cputime=38.414 memavail=1641760 print_time=783.780 buffer_time=3.234 print_stall=10 extruder: target=220 temp=219.8 pwm=0.597
Stats 772.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=322560 bytes_read=274383 bytes_retransmit=9 bytes_invalid=0 send_seq=12469 receive_seq=12469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.4 pwm=0.023 rpi: temp=52.1 mcu_temp: temp=36.0 sd_pos=928 sysload=0.25 cputime=38.454 memavail=1641700 print_time=783.780 buffer_time=2.233 print_stall=10 extruder: target=220 temp=219.8 pwm=0.532
Stats 773.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=323132 bytes_read=274780 bytes_retransmit=9 bytes_invalid=0 send_seq=12488 receive_seq=12488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.4 pwm=0.440 rpi: temp=51.1 mcu_temp: temp=36.1 sd_pos=928 sysload=0.25 cputime=38.511 memavail=1641452 print_time=785.813 buffer_time=3.263 print_stall=10 extruder: target=220 temp=219.8 pwm=0.500
Stats 774.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=323375 bytes_read=275177 bytes_retransmit=9 bytes_invalid=0 send_seq=12504 receive_seq=12504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.4 pwm=0.310 rpi: temp=52.1 mcu_temp: temp=35.8 sd_pos=928 sysload=0.25 cputime=38.569 memavail=1641688 print_time=785.813 buffer_time=2.262 print_stall=10 extruder: target=220 temp=219.4 pwm=0.676
Stats 775.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=323728 bytes_read=275558 bytes_retransmit=9 bytes_invalid=0 send_seq=12520 receive_seq=12520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.5 pwm=0.003 rpi: temp=51.6 mcu_temp: temp=35.8 sd_pos=928 sysload=0.25 cputime=38.627 memavail=1641408 print_time=786.563 buffer_time=2.011 print_stall=10 extruder: target=220 temp=219.6 pwm=0.500
Stats 776.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=324239 bytes_read=275940 bytes_retransmit=9 bytes_invalid=0 send_seq=12539 receive_seq=12539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.5 pwm=0.170 rpi: temp=51.1 mcu_temp: temp=36.5 sd_pos=1325 sysload=0.25 cputime=38.690 memavail=1641420 print_time=789.570 buffer_time=4.017 print_stall=10 extruder: target=220 temp=219.5 pwm=0.585
Stats 777.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=324510 bytes_read=276327 bytes_retransmit=9 bytes_invalid=0 send_seq=12553 receive_seq=12553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.3 pwm=0.430 rpi: temp=51.1 mcu_temp: temp=35.9 sd_pos=1325 sysload=0.23 cputime=38.745 memavail=1641732 print_time=789.570 buffer_time=3.017 print_stall=10 extruder: target=220 temp=219.3 pwm=0.652
Stats 778.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=324747 bytes_read=276713 bytes_retransmit=9 bytes_invalid=0 send_seq=12567 receive_seq=12567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.2 pwm=0.699 rpi: temp=51.1 mcu_temp: temp=35.5 sd_pos=1325 sysload=0.23 cputime=38.799 memavail=1641732 print_time=789.570 buffer_time=2.014 print_stall=10 extruder: target=220 temp=219.4 pwm=0.556
Stats 779.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=325748 bytes_read=277125 bytes_retransmit=9 bytes_invalid=0 send_seq=12592 receive_seq=12592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.3 pwm=0.299 rpi: temp=50.6 mcu_temp: temp=36.4 sd_pos=1530 sysload=0.23 cputime=38.862 memavail=1641672 print_time=790.704 buffer_time=2.147 print_stall=10 extruder: target=220 temp=219.3 pwm=0.556
Stats 780.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=326505 bytes_read=277552 bytes_retransmit=9 bytes_invalid=0 send_seq=12614 receive_seq=12614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.5 pwm=0.019 rpi: temp=51.6 mcu_temp: temp=36.4 sd_pos=2089 sysload=0.23 cputime=38.932 memavail=1641864 print_time=791.572 buffer_time=2.014 print_stall=10 extruder: target=220 temp=219.4 pwm=0.556
Stats 781.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=327702 bytes_read=277998 bytes_retransmit=9 bytes_invalid=0 send_seq=12643 receive_seq=12643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.5 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=35.6 sd_pos=2832 sysload=0.23 cputime=39.004 memavail=1641808 print_time=792.728 buffer_time=2.168 print_stall=10 extruder: target=220 temp=219.2 pwm=0.661
Stats 782.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000041 bytes_write=328588 bytes_read=278415 bytes_retransmit=9 bytes_invalid=0 send_seq=12669 receive_seq=12669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.4 pwm=0.299 rpi: temp=51.6 mcu_temp: temp=36.4 sd_pos=3362 sysload=0.29 cputime=39.054 memavail=1641808 print_time=793.658 buffer_time=2.097 print_stall=10 extruder: target=220 temp=219.3 pwm=0.555
Stats 783.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=329565 bytes_read=278862 bytes_retransmit=9 bytes_invalid=0 send_seq=12692 receive_seq=12692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.3 pwm=0.503 rpi: temp=51.6 mcu_temp: temp=36.3 sd_pos=4052 sysload=0.29 cputime=39.122 memavail=1641756 print_time=794.829 buffer_time=2.267 print_stall=10 extruder: target=220 temp=219.1 pwm=0.640
Stats 784.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=330455 bytes_read=279283 bytes_retransmit=9 bytes_invalid=0 send_seq=12716 receive_seq=12716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.4 pwm=0.122 rpi: temp=51.6 mcu_temp: temp=35.9 sd_pos=4486 sysload=0.29 cputime=39.186 memavail=1641444 print_time=795.559 buffer_time=1.994 print_stall=10 extruder: target=220 temp=219.0 pwm=0.691
Stats 785.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=331365 bytes_read=279680 bytes_retransmit=9 bytes_invalid=0 send_seq=12738 receive_seq=12738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.5 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=36.5 sd_pos=5067 sysload=0.29 cputime=39.256 memavail=1641640 print_time=796.712 buffer_time=2.147 print_stall=10 extruder: target=220 temp=219.1 pwm=0.614
Stats 786.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=332486 bytes_read=280132 bytes_retransmit=9 bytes_invalid=0 send_seq=12765 receive_seq=12765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.4 pwm=0.205 rpi: temp=51.6 mcu_temp: temp=36.0 sd_pos=5545 sysload=0.29 cputime=39.324 memavail=1641388 print_time=797.798 buffer_time=2.232 print_stall=10 extruder: target=220 temp=219.4 pwm=0.460
Stats 787.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=333219 bytes_read=280538 bytes_retransmit=9 bytes_invalid=0 send_seq=12786 receive_seq=12786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.2 pwm=0.648 rpi: temp=51.1 mcu_temp: temp=36.5 sd_pos=5714 sysload=0.27 cputime=39.385 memavail=1641580 print_time=798.700 buffer_time=2.132 print_stall=10 extruder: target=220 temp=219.2 pwm=0.597
Stats 788.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=334119 bytes_read=280960 bytes_retransmit=9 bytes_invalid=0 send_seq=12810 receive_seq=12810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.2 pwm=0.465 rpi: temp=51.6 mcu_temp: temp=36.2 sd_pos=5857 sysload=0.27 cputime=39.447 memavail=1641580 print_time=799.838 buffer_time=2.268 print_stall=10 extruder: target=220 temp=219.4 pwm=0.531
Stats 789.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=335038 bytes_read=281411 bytes_retransmit=9 bytes_invalid=0 send_seq=12834 receive_seq=12834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.3 pwm=0.303 rpi: temp=51.1 mcu_temp: temp=36.0 sd_pos=5998 sysload=0.27 cputime=39.511 memavail=1641592 print_time=801.061 buffer_time=2.489 print_stall=10 extruder: target=220 temp=219.2 pwm=0.678
Stats 790.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=335660 bytes_read=281788 bytes_retransmit=9 bytes_invalid=0 send_seq=12852 receive_seq=12852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.4 pwm=0.189 rpi: temp=50.6 mcu_temp: temp=36.4 sd_pos=6087 sysload=0.27 cputime=39.570 memavail=1641340 print_time=801.707 buffer_time=2.135 print_stall=10 extruder: target=220 temp=219.5 pwm=0.544
Stats 791.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=336654 bytes_read=282200 bytes_retransmit=9 bytes_invalid=0 send_seq=12877 receive_seq=12877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.3 pwm=0.250 rpi: temp=52.1 mcu_temp: temp=36.2 sd_pos=6239 sysload=0.27 cputime=39.635 memavail=1641340 print_time=802.972 buffer_time=2.398 print_stall=10 extruder: target=220 temp=219.6 pwm=0.498
Stats 792.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=337323 bytes_read=282641 bytes_retransmit=9 bytes_invalid=0 send_seq=12899 receive_seq=12899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.4 pwm=0.010 rpi: temp=50.6 mcu_temp: temp=35.8 sd_pos=6332 sysload=0.33 cputime=39.681 memavail=1641608 print_time=803.613 buffer_time=2.038 print_stall=10 extruder: target=220 temp=219.6 pwm=0.553
Stats 793.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=338233 bytes_read=283079 bytes_retransmit=9 bytes_invalid=0 send_seq=12924 receive_seq=12924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=60.3 pwm=0.444 rpi: temp=51.1 mcu_temp: temp=36.4 sd_pos=6482 sysload=0.33 cputime=39.742 memavail=1641608 print_time=804.784 buffer_time=2.208 print_stall=10 extruder: target=220 temp=219.8 pwm=0.426
Stats 794.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=339101 bytes_read=283501 bytes_retransmit=9 bytes_invalid=0 send_seq=12948 receive_seq=12948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=10 freq=71996487 heater_bed: target=60 temp=60.3 pwm=0.132 rpi: temp=51.1 mcu_temp: temp=36.0 sd_pos=6659 sysload=0.33 cputime=39.806 memavail=1641608 print_time=805.848 buffer_time=2.269 print_stall=10 extruder: target=220 temp=219.9 pwm=0.455
Stats 795.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=340526 bytes_read=283967 bytes_retransmit=9 bytes_invalid=0 send_seq=12980 receive_seq=12978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=60.4 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.1 sd_pos=7237 sysload=0.33 cputime=39.876 memavail=1641616 print_time=806.934 buffer_time=2.353 print_stall=10 extruder: target=215 temp=219.8 pwm=0.109
Stats 796.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=341604 bytes_read=284394 bytes_retransmit=9 bytes_invalid=0 send_seq=13006 receive_seq=13006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=60.4 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.5 sd_pos=7774 sysload=0.33 cputime=39.944 memavail=1641604 print_time=807.797 buffer_time=2.215 print_stall=10 extruder: target=215 temp=220.1 pwm=0.009
Stats 797.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=342421 bytes_read=284801 bytes_retransmit=9 bytes_invalid=0 send_seq=13027 receive_seq=13027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996487 heater_bed: target=55 temp=60.4 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.6 sd_pos=8299 sysload=0.30 cputime=40.014 memavail=1641620 print_time=808.683 buffer_time=2.099 print_stall=10 extruder: target=215 temp=220.0 pwm=0.024
Stats 798.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000028 mcu_task_stddev=0.000071 bytes_write=343703 bytes_read=285272 bytes_retransmit=9 bytes_invalid=0 send_seq=13055 receive_seq=13055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996488 heater_bed: target=55 temp=60.2 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.7 sd_pos=9011 sysload=0.30 cputime=40.084 memavail=1641628 print_time=809.776 buffer_time=2.193 print_stall=10 extruder: target=215 temp=219.9 pwm=0.094
Stats 799.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000028 mcu_task_stddev=0.000071 bytes_write=345384 bytes_read=285734 bytes_retransmit=9 bytes_invalid=0 send_seq=13090 receive_seq=13090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996488 heater_bed: target=55 temp=60.2 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.6 sd_pos=9968 sysload=0.30 cputime=40.163 memavail=1641548 print_time=810.929 buffer_time=2.343 print_stall=10 extruder: target=215 temp=219.7 pwm=0.160
Stats 800.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000028 mcu_task_stddev=0.000071 bytes_write=348458 bytes_read=286326 bytes_retransmit=9 bytes_invalid=0 send_seq=13148 receive_seq=13148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=10 freq=71996489 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.7 sd_pos=10889 sysload=0.30 cputime=40.243 memavail=1641560 print_time=811.889 buffer_time=2.301 print_stall=10 extruder: target=215 temp=219.4 pwm=0.259
Stats 801.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000028 mcu_task_stddev=0.000071 bytes_write=349289 bytes_read=286742 bytes_retransmit=9 bytes_invalid=0 send_seq=13168 receive_seq=13168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996493 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.4 sd_pos=11036 sysload=0.30 cputime=40.306 memavail=1641568 print_time=812.761 buffer_time=2.172 print_stall=10 extruder: target=215 temp=219.3 pwm=0.160
Stats 802.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000028 mcu_task_stddev=0.000071 bytes_write=350090 bytes_read=287134 bytes_retransmit=9 bytes_invalid=0 send_seq=13189 receive_seq=13189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996492 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.6 sd_pos=11182 sysload=0.36 cputime=40.351 memavail=1641564 print_time=813.873 buffer_time=2.283 print_stall=10 extruder: target=215 temp=218.7 pwm=0.386
Stats 803.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=350911 bytes_read=287541 bytes_retransmit=9 bytes_invalid=0 send_seq=13208 receive_seq=13207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996492 heater_bed: target=55 temp=59.8 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.5 sd_pos=11331 sysload=0.36 cputime=40.410 memavail=1641684 print_time=815.157 buffer_time=2.565 print_stall=10 extruder: target=215 temp=218.8 pwm=0.137
Stats 804.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=351439 bytes_read=287947 bytes_retransmit=9 bytes_invalid=0 send_seq=13225 receive_seq=13225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996494 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=36.5 sd_pos=11392 sysload=0.36 cputime=40.468 memavail=1641688 print_time=815.846 buffer_time=2.252 print_stall=10 extruder: target=215 temp=218.1 pwm=0.313
Stats 805.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=352365 bytes_read=288349 bytes_retransmit=9 bytes_invalid=0 send_seq=13249 receive_seq=13248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996493 heater_bed: target=55 temp=59.7 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.1 sd_pos=11544 sysload=0.36 cputime=40.527 memavail=1641628 print_time=817.283 buffer_time=2.689 print_stall=10 extruder: target=215 temp=217.8 pwm=0.334
Stats 806.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=352910 bytes_read=288741 bytes_retransmit=9 bytes_invalid=0 send_seq=13266 receive_seq=13266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996494 heater_bed: target=55 temp=59.7 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.7 sd_pos=11603 sysload=0.36 cputime=40.582 memavail=1641376 print_time=818.016 buffer_time=2.420 print_stall=10 extruder: target=215 temp=217.5 pwm=0.344
Stats 807.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000059 bytes_write=353516 bytes_read=289152 bytes_retransmit=9 bytes_invalid=0 send_seq=13285 receive_seq=13285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996492 heater_bed: target=55 temp=59.6 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=36.5 sd_pos=11695 sysload=0.33 cputime=40.639 memavail=1641384 print_time=818.771 buffer_time=2.174 print_stall=10 extruder: target=215 temp=216.9 pwm=0.493
Stats 808.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=354520 bytes_read=289584 bytes_retransmit=9 bytes_invalid=0 send_seq=13311 receive_seq=13311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996491 heater_bed: target=55 temp=59.5 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.7 sd_pos=11845 sysload=0.33 cputime=40.698 memavail=1641072 print_time=820.273 buffer_time=2.672 print_stall=10 extruder: target=215 temp=216.6 pwm=0.465
Stats 809.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=355126 bytes_read=289976 bytes_retransmit=9 bytes_invalid=0 send_seq=13329 receive_seq=13329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996493 heater_bed: target=55 temp=59.1 pwm=0.056 rpi: temp=51.1 mcu_temp: temp=36.1 sd_pos=11904 sysload=0.33 cputime=40.753 memavail=1641576 print_time=821.000 buffer_time=2.399 print_stall=10 extruder: target=215 temp=216.4 pwm=0.411
Stats 810.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=355705 bytes_read=290372 bytes_retransmit=9 bytes_invalid=0 send_seq=13345 receive_seq=13345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=55 temp=59.1 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=36.5 sd_pos=11997 sysload=0.33 cputime=40.808 memavail=1641324 print_time=821.755 buffer_time=2.153 print_stall=10 extruder: target=215 temp=216.0 pwm=0.530
Stats 811.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=356572 bytes_read=290774 bytes_retransmit=9 bytes_invalid=0 send_seq=13368 receive_seq=13368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996491 heater_bed: target=55 temp=59.1 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.4 sd_pos=12148 sysload=0.33 cputime=40.867 memavail=1641340 print_time=823.154 buffer_time=2.548 print_stall=10 extruder: target=215 temp=215.7 pwm=0.457
Stats 812.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=357089 bytes_read=291156 bytes_retransmit=9 bytes_invalid=0 send_seq=13384 receive_seq=13384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996492 heater_bed: target=55 temp=59.0 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=36.6 sd_pos=12207 sysload=0.30 cputime=40.907 memavail=1641340 print_time=823.830 buffer_time=2.225 print_stall=10 extruder: target=215 temp=215.4 pwm=0.545
Stats 813.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=357931 bytes_read=291592 bytes_retransmit=9 bytes_invalid=0 send_seq=13405 receive_seq=13405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996490 heater_bed: target=55 temp=58.7 pwm=0.275 rpi: temp=51.6 mcu_temp: temp=36.7 sd_pos=12360 sysload=0.30 cputime=40.966 memavail=1641600 print_time=825.087 buffer_time=2.480 print_stall=10 extruder: target=215 temp=215.2 pwm=0.445
Stats 814.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=358461 bytes_read=291969 bytes_retransmit=9 bytes_invalid=0 send_seq=13423 receive_seq=13423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=55 temp=58.7 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=36.9 sd_pos=12449 sysload=0.30 cputime=41.022 memavail=1641404 print_time=825.669 buffer_time=2.061 print_stall=10 extruder: target=215 temp=215.1 pwm=0.456
Stats 815.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=359230 bytes_read=292386 bytes_retransmit=9 bytes_invalid=0 send_seq=13443 receive_seq=13443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996487 heater_bed: target=55 temp=58.7 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.1 sd_pos=12635 sysload=0.30 cputime=41.084 memavail=1641712 print_time=826.658 buffer_time=2.047 print_stall=10 extruder: target=215 temp=215.0 pwm=0.456
Stats 816.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=360495 bytes_read=292822 bytes_retransmit=9 bytes_invalid=0 send_seq=13470 receive_seq=13470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=58.5 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.8 sd_pos=13455 sysload=0.30 cputime=41.152 memavail=1641464 print_time=827.806 buffer_time=2.195 print_stall=10 extruder: target=215 temp=215.0 pwm=0.396
Stats 817.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=361440 bytes_read=293224 bytes_retransmit=9 bytes_invalid=0 send_seq=13493 receive_seq=13493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=58.5 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.4 sd_pos=14170 sysload=0.28 cputime=41.222 memavail=1641404 print_time=828.845 buffer_time=2.233 print_stall=10 extruder: target=215 temp=214.7 pwm=0.505
Stats 818.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=362446 bytes_read=293671 bytes_retransmit=9 bytes_invalid=0 send_seq=13516 receive_seq=13516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996486 heater_bed: target=55 temp=58.4 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=36.8 sd_pos=14808 sysload=0.28 cputime=41.292 memavail=1641404 print_time=829.697 buffer_time=2.083 print_stall=10 extruder: target=215 temp=214.7 pwm=0.428
Stats 819.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=363369 bytes_read=294082 bytes_retransmit=9 bytes_invalid=0 send_seq=13538 receive_seq=13538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996484 heater_bed: target=55 temp=58.3 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.9 sd_pos=15565 sysload=0.28 cputime=41.363 memavail=1641464 print_time=830.810 buffer_time=2.195 print_stall=10 extruder: target=215 temp=214.7 pwm=0.410
Stats 820.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=365468 bytes_read=294579 bytes_retransmit=9 bytes_invalid=0 send_seq=13580 receive_seq=13580 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996481 heater_bed: target=55 temp=58.2 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.9 sd_pos=16728 sysload=0.28 cputime=41.438 memavail=1641464 print_time=831.718 buffer_time=2.102 print_stall=10 extruder: target=215 temp=214.8 pwm=0.334
Stats 821.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=367911 bytes_read=295113 bytes_retransmit=9 bytes_invalid=0 send_seq=13627 receive_seq=13627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=58.1 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=37.0 sd_pos=17572 sysload=0.28 cputime=41.512 memavail=1641192 print_time=833.056 buffer_time=2.439 print_stall=10 extruder: target=215 temp=214.6 pwm=0.457
Stats 822.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=368672 bytes_read=295560 bytes_retransmit=9 bytes_invalid=0 send_seq=13649 receive_seq=13649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=58.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.9 sd_pos=17719 sysload=0.34 cputime=41.575 memavail=1641164 print_time=834.156 buffer_time=2.537 print_stall=10 extruder: target=215 temp=214.5 pwm=0.457
Stats 823.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=369157 bytes_read=295942 bytes_retransmit=9 bytes_invalid=0 send_seq=13665 receive_seq=13665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996479 heater_bed: target=55 temp=57.9 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=36.9 sd_pos=17808 sysload=0.34 cputime=41.633 memavail=1641172 print_time=834.787 buffer_time=2.166 print_stall=10 extruder: target=215 temp=214.4 pwm=0.510
Stats 824.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=370050 bytes_read=296374 bytes_retransmit=9 bytes_invalid=0 send_seq=13688 receive_seq=13688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996481 heater_bed: target=55 temp=57.7 pwm=0.100 rpi: temp=51.1 mcu_temp: temp=37.4 sd_pos=17959 sysload=0.34 cputime=41.695 memavail=1641112 print_time=836.161 buffer_time=2.539 print_stall=10 extruder: target=215 temp=214.1 pwm=0.603
Stats 825.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=370626 bytes_read=296773 bytes_retransmit=9 bytes_invalid=0 send_seq=13709 receive_seq=13709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996481 heater_bed: target=55 temp=57.5 pwm=0.300 rpi: temp=51.1 mcu_temp: temp=36.9 sd_pos=18020 sysload=0.34 cputime=41.751 memavail=1641112 print_time=836.892 buffer_time=2.269 print_stall=10 extruder: target=215 temp=214.1 pwm=0.522
Stats 826.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=371260 bytes_read=297155 bytes_retransmit=9 bytes_invalid=0 send_seq=13730 receive_seq=13730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=57.5 pwm=0.069 rpi: temp=51.6 mcu_temp: temp=36.6 sd_pos=18078 sysload=0.34 cputime=41.808 memavail=1641364 print_time=837.641 buffer_time=2.018 print_stall=10 extruder: target=215 temp=214.1 pwm=0.512
Stats 827.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=372160 bytes_read=297580 bytes_retransmit=9 bytes_invalid=0 send_seq=13754 receive_seq=13754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=57.4 pwm=0.085 rpi: temp=52.1 mcu_temp: temp=37.2 sd_pos=18200 sysload=0.31 cputime=41.870 memavail=1641104 print_time=839.189 buffer_time=2.564 print_stall=10 extruder: target=215 temp=214.2 pwm=0.456
Stats 828.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=372718 bytes_read=297975 bytes_retransmit=9 bytes_invalid=0 send_seq=13772 receive_seq=13772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=57.4 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=37.3 sd_pos=18293 sysload=0.31 cputime=41.924 memavail=1641356 print_time=839.987 buffer_time=2.361 print_stall=10 extruder: target=215 temp=214.0 pwm=0.531
Stats 829.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=373366 bytes_read=298357 bytes_retransmit=9 bytes_invalid=0 send_seq=13791 receive_seq=13791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=56.9 pwm=0.921 rpi: temp=51.6 mcu_temp: temp=37.2 sd_pos=18353 sysload=0.31 cputime=41.982 memavail=1641368 print_time=840.767 buffer_time=2.140 print_stall=10 extruder: target=215 temp=213.9 pwm=0.594
Stats 830.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=374284 bytes_read=298804 bytes_retransmit=9 bytes_invalid=0 send_seq=13817 receive_seq=13817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=57.1 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.4 sd_pos=18506 sysload=0.31 cputime=42.046 memavail=1641368 print_time=842.343 buffer_time=2.715 print_stall=10 extruder: target=215 temp=213.8 pwm=0.580
Stats 831.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=374831 bytes_read=299195 bytes_retransmit=9 bytes_invalid=0 send_seq=13835 receive_seq=13835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=57.0 pwm=0.061 rpi: temp=51.6 mcu_temp: temp=37.3 sd_pos=18568 sysload=0.31 cputime=42.102 memavail=1641116 print_time=843.121 buffer_time=2.491 print_stall=10 extruder: target=215 temp=213.9 pwm=0.470
Stats 832.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=375546 bytes_read=299577 bytes_retransmit=9 bytes_invalid=0 send_seq=13854 receive_seq=13854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=55 temp=56.9 pwm=0.121 rpi: temp=51.1 mcu_temp: temp=37.1 sd_pos=18628 sysload=0.28 cputime=42.144 memavail=1641360 print_time=843.888 buffer_time=2.258 print_stall=10 extruder: target=215 temp=213.9 pwm=0.470
Stats 833.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=376114 bytes_read=300004 bytes_retransmit=9 bytes_invalid=0 send_seq=13873 receive_seq=13873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.3 sd_pos=18688 sysload=0.28 cputime=42.202 memavail=1641672 print_time=844.636 buffer_time=2.005 print_stall=10 extruder: target=215 temp=213.9 pwm=0.474
Stats 834.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=376910 bytes_read=300405 bytes_retransmit=9 bytes_invalid=0 send_seq=13893 receive_seq=13893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.5 sd_pos=18836 sysload=0.28 cputime=42.262 memavail=1641740 print_time=846.063 buffer_time=2.431 print_stall=10 extruder: target=215 temp=213.9 pwm=0.533
Stats 835.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=377468 bytes_read=300772 bytes_retransmit=9 bytes_invalid=0 send_seq=13909 receive_seq=13909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=37.5 sd_pos=18924 sysload=0.28 cputime=42.317 memavail=1641992 print_time=846.742 buffer_time=2.109 print_stall=10 extruder: target=215 temp=213.8 pwm=0.592
Stats 836.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=378250 bytes_read=301199 bytes_retransmit=9 bytes_invalid=0 send_seq=13931 receive_seq=13931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.1 sd_pos=19072 sysload=0.28 cputime=42.378 memavail=1641992 print_time=847.943 buffer_time=2.308 print_stall=10 extruder: target=215 temp=213.8 pwm=0.591
Stats 837.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000062 bytes_write=379034 bytes_read=301605 bytes_retransmit=9 bytes_invalid=0 send_seq=13952 receive_seq=13952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996484 heater_bed: target=55 temp=56.7 pwm=0.057 rpi: temp=51.6 mcu_temp: temp=37.4 sd_pos=19249 sysload=0.26 cputime=42.437 memavail=1641864 print_time=848.954 buffer_time=2.318 print_stall=10 extruder: target=215 temp=213.7 pwm=0.619
Stats 838.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=380595 bytes_read=302067 bytes_retransmit=9 bytes_invalid=0 send_seq=13984 receive_seq=13984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.1 sd_pos=20106 sysload=0.26 cputime=42.504 memavail=1641864 print_time=850.033 buffer_time=2.395 print_stall=10 extruder: target=215 temp=214.0 pwm=0.478
Stats 839.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=381533 bytes_read=302494 bytes_retransmit=9 bytes_invalid=0 send_seq=14006 receive_seq=14006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=37.5 sd_pos=20693 sysload=0.26 cputime=42.567 memavail=1641608 print_time=850.648 buffer_time=2.010 print_stall=10 extruder: target=215 temp=214.1 pwm=0.478
Stats 840.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=382498 bytes_read=302915 bytes_retransmit=9 bytes_invalid=0 send_seq=14030 receive_seq=14030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996486 heater_bed: target=55 temp=56.6 pwm=0.152 rpi: temp=51.6 mcu_temp: temp=37.1 sd_pos=21564 sysload=0.26 cputime=42.640 memavail=1641612 print_time=851.715 buffer_time=2.076 print_stall=10 extruder: target=215 temp=214.1 pwm=0.487
Stats 841.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=383711 bytes_read=303347 bytes_retransmit=9 bytes_invalid=0 send_seq=14059 receive_seq=14059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996486 heater_bed: target=55 temp=56.7 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=37.4 sd_pos=22443 sysload=0.26 cputime=42.712 memavail=1641628 print_time=852.863 buffer_time=2.223 print_stall=10 extruder: target=215 temp=214.2 pwm=0.487
Stats 842.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=384891 bytes_read=303794 bytes_retransmit=9 bytes_invalid=0 send_seq=14086 receive_seq=14085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=56.6 pwm=0.059 rpi: temp=50.6 mcu_temp: temp=37.3 sd_pos=23266 sysload=0.24 cputime=42.786 memavail=1641008 print_time=853.912 buffer_time=2.268 print_stall=10 extruder: target=215 temp=214.2 pwm=0.460
Stats 843.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000072 bytes_write=387277 bytes_read=304350 bytes_retransmit=9 bytes_invalid=0 send_seq=14133 receive_seq=14133 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996484 heater_bed: target=55 temp=56.4 pwm=0.457 rpi: temp=50.6 mcu_temp: temp=37.7 sd_pos=24663 sysload=0.24 cputime=42.868 memavail=1641644 print_time=854.797 buffer_time=2.153 print_stall=10 extruder: target=215 temp=214.4 pwm=0.390
Stats 844.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000072 bytes_write=389741 bytes_read=304882 bytes_retransmit=9 bytes_invalid=0 send_seq=14182 receive_seq=14182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=56.3 pwm=0.386 rpi: temp=52.1 mcu_temp: temp=37.4 sd_pos=25446 sysload=0.24 cputime=42.940 memavail=1641380 print_time=855.791 buffer_time=2.146 print_stall=10 extruder: target=215 temp=214.3 pwm=0.478
Stats 845.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000072 bytes_write=390863 bytes_read=305339 bytes_retransmit=9 bytes_invalid=0 send_seq=14210 receive_seq=14210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=56.2 pwm=0.168 rpi: temp=51.1 mcu_temp: temp=37.6 sd_pos=25681 sysload=0.24 cputime=43.005 memavail=1641316 print_time=857.052 buffer_time=2.406 print_stall=10 extruder: target=215 temp=214.2 pwm=0.545
Stats 846.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000072 bytes_write=391790 bytes_read=305765 bytes_retransmit=9 bytes_invalid=0 send_seq=14235 receive_seq=14235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996481 heater_bed: target=55 temp=56.2 pwm=0.278 rpi: temp=51.1 mcu_temp: temp=37.3 sd_pos=25829 sysload=0.24 cputime=43.066 memavail=1641580 print_time=858.086 buffer_time=2.440 print_stall=10 extruder: target=215 temp=214.3 pwm=0.524
Stats 847.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000028 mcu_task_stddev=0.000072 bytes_write=392671 bytes_read=306142 bytes_retransmit=9 bytes_invalid=0 send_seq=14258 receive_seq=14253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=56.2 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=37.3 sd_pos=25979 sysload=0.22 cputime=43.125 memavail=1641440 print_time=859.222 buffer_time=2.574 print_stall=10 extruder: target=215 temp=214.2 pwm=0.585
Stats 848.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000056 bytes_write=393297 bytes_read=306589 bytes_retransmit=9 bytes_invalid=0 send_seq=14276 receive_seq=14276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996479 heater_bed: target=55 temp=56.2 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=26038 sysload=0.22 cputime=43.182 memavail=1641392 print_time=859.817 buffer_time=2.168 print_stall=10 extruder: target=215 temp=214.1 pwm=0.585
Stats 849.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000056 bytes_write=394296 bytes_read=307015 bytes_retransmit=9 bytes_invalid=0 send_seq=14301 receive_seq=14301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996477 heater_bed: target=55 temp=56.1 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=37.4 sd_pos=26220 sysload=0.22 cputime=43.244 memavail=1641656 print_time=861.044 buffer_time=2.395 print_stall=10 extruder: target=215 temp=214.2 pwm=0.571
Stats 850.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000056 bytes_write=394924 bytes_read=307397 bytes_retransmit=9 bytes_invalid=0 send_seq=14320 receive_seq=14320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=55 temp=55.9 pwm=0.571 rpi: temp=50.6 mcu_temp: temp=37.8 sd_pos=26313 sysload=0.22 cputime=43.301 memavail=1641404 print_time=861.670 buffer_time=2.019 print_stall=10 extruder: target=215 temp=214.1 pwm=0.571
Stats 851.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000056 bytes_write=395934 bytes_read=307849 bytes_retransmit=9 bytes_invalid=0 send_seq=14347 receive_seq=14347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996474 heater_bed: target=55 temp=55.9 pwm=0.265 rpi: temp=51.6 mcu_temp: temp=37.1 sd_pos=26435 sysload=0.22 cputime=43.364 memavail=1641348 print_time=862.931 buffer_time=2.280 print_stall=10 extruder: target=215 temp=214.1 pwm=0.596
Stats 852.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000056 bytes_write=396939 bytes_read=308296 bytes_retransmit=9 bytes_invalid=0 send_seq=14374 receive_seq=14374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996477 heater_bed: target=55 temp=56.0 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.3 sd_pos=26618 sysload=0.20 cputime=43.426 memavail=1641360 print_time=864.195 buffer_time=2.543 print_stall=10 extruder: target=215 temp=214.1 pwm=0.563
Stats 853.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=397555 bytes_read=308698 bytes_retransmit=9 bytes_invalid=0 send_seq=14394 receive_seq=14394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996478 heater_bed: target=55 temp=55.8 pwm=0.089 rpi: temp=52.1 mcu_temp: temp=37.1 sd_pos=26708 sysload=0.20 cputime=43.484 memavail=1641612 print_time=864.803 buffer_time=2.149 print_stall=10 extruder: target=215 temp=214.1 pwm=0.512
Stats 854.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=398609 bytes_read=309145 bytes_retransmit=9 bytes_invalid=0 send_seq=14420 receive_seq=14420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=55.7 pwm=0.384 rpi: temp=51.1 mcu_temp: temp=37.3 sd_pos=26858 sysload=0.20 cputime=43.545 memavail=1642044 print_time=866.000 buffer_time=2.345 print_stall=10 extruder: target=215 temp=214.1 pwm=0.540
Stats 855.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=399650 bytes_read=309581 bytes_retransmit=9 bytes_invalid=0 send_seq=14447 receive_seq=14447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=55.7 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=26978 sysload=0.20 cputime=43.605 memavail=1642032 print_time=867.128 buffer_time=2.473 print_stall=10 extruder: target=215 temp=214.1 pwm=0.612
Stats 856.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=400238 bytes_read=309963 bytes_retransmit=9 bytes_invalid=0 send_seq=14466 receive_seq=14466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=55.5 pwm=0.498 rpi: temp=51.1 mcu_temp: temp=37.6 sd_pos=27039 sysload=0.20 cputime=43.660 memavail=1641720 print_time=867.657 buffer_time=2.001 print_stall=10 extruder: target=215 temp=214.3 pwm=0.479
Stats 857.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=401319 bytes_read=310410 bytes_retransmit=9 bytes_invalid=0 send_seq=14492 receive_seq=14492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=55.6 pwm=0.173 rpi: temp=50.6 mcu_temp: temp=37.1 sd_pos=27280 sysload=0.18 cputime=43.724 memavail=1641728 print_time=869.048 buffer_time=2.389 print_stall=10 extruder: target=215 temp=214.2 pwm=0.593
Stats 858.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=402459 bytes_read=310861 bytes_retransmit=9 bytes_invalid=0 send_seq=14519 receive_seq=14519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996483 heater_bed: target=55 temp=55.4 pwm=0.446 rpi: temp=52.1 mcu_temp: temp=37.5 sd_pos=27833 sysload=0.18 cputime=43.790 memavail=1641728 print_time=869.956 buffer_time=2.295 print_stall=10 extruder: target=215 temp=214.5 pwm=0.439
Stats 859.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=403498 bytes_read=311278 bytes_retransmit=9 bytes_invalid=0 send_seq=14545 receive_seq=14545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996487 heater_bed: target=55 temp=55.6 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=37.7 sd_pos=28455 sysload=0.18 cputime=43.855 memavail=1641476 print_time=870.803 buffer_time=2.142 print_stall=10 extruder: target=215 temp=214.4 pwm=0.560
Stats 860.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=404374 bytes_read=311710 bytes_retransmit=9 bytes_invalid=0 send_seq=14568 receive_seq=14568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996491 heater_bed: target=55 temp=55.5 pwm=0.053 rpi: temp=51.6 mcu_temp: temp=37.8 sd_pos=29112 sysload=0.18 cputime=43.924 memavail=1641728 print_time=871.720 buffer_time=2.057 print_stall=10 extruder: target=215 temp=214.4 pwm=0.507
Stats 861.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=405606 bytes_read=312156 bytes_retransmit=9 bytes_invalid=0 send_seq=14597 receive_seq=14597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996492 heater_bed: target=55 temp=55.5 pwm=0.112 rpi: temp=50.6 mcu_temp: temp=37.4 sd_pos=29962 sysload=0.18 cputime=43.998 memavail=1641980 print_time=872.839 buffer_time=2.173 print_stall=10 extruder: target=215 temp=214.5 pwm=0.463
Stats 862.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=406610 bytes_read=312558 bytes_retransmit=9 bytes_invalid=0 send_seq=14621 receive_seq=14620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996491 heater_bed: target=55 temp=55.4 pwm=0.367 rpi: temp=51.6 mcu_temp: temp=37.4 sd_pos=30778 sysload=0.17 cputime=44.053 memavail=1641728 print_time=873.936 buffer_time=2.267 print_stall=10 extruder: target=215 temp=214.5 pwm=0.463
Stats 863.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=408834 bytes_read=313139 bytes_retransmit=9 bytes_invalid=0 send_seq=14667 receive_seq=14667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996488 heater_bed: target=55 temp=55.4 pwm=0.206 rpi: temp=51.6 mcu_temp: temp=37.6 sd_pos=32045 sysload=0.17 cputime=44.140 memavail=1641732 print_time=874.790 buffer_time=2.119 print_stall=10 extruder: target=215 temp=214.5 pwm=0.578
Stats 864.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=411452 bytes_read=313686 bytes_retransmit=9 bytes_invalid=0 send_seq=14719 receive_seq=14719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996487 heater_bed: target=55 temp=55.3 pwm=0.400 rpi: temp=51.6 mcu_temp: temp=37.6 sd_pos=33007 sysload=0.17 cputime=44.217 memavail=1641796 print_time=875.984 buffer_time=2.309 print_stall=10 extruder: target=215 temp=214.6 pwm=0.531
Stats 865.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=412301 bytes_read=314093 bytes_retransmit=9 bytes_invalid=0 send_seq=14743 receive_seq=14743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996487 heater_bed: target=55 temp=55.3 pwm=0.226 rpi: temp=52.1 mcu_temp: temp=37.5 sd_pos=33155 sysload=0.17 cputime=44.277 memavail=1641548 print_time=876.901 buffer_time=2.225 print_stall=10 extruder: target=215 temp=214.5 pwm=0.581
Stats 866.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=413221 bytes_read=314549 bytes_retransmit=9 bytes_invalid=0 send_seq=14768 receive_seq=14768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996486 heater_bed: target=55 temp=55.2 pwm=0.478 rpi: temp=52.6 mcu_temp: temp=37.5 sd_pos=33305 sysload=0.17 cputime=44.339 memavail=1641740 print_time=877.959 buffer_time=2.279 print_stall=10 extruder: target=215 temp=214.7 pwm=0.437
Stats 867.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=414181 bytes_read=314956 bytes_retransmit=9 bytes_invalid=0 send_seq=14792 receive_seq=14792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996484 heater_bed: target=55 temp=55.3 pwm=0.232 rpi: temp=51.6 mcu_temp: temp=37.6 sd_pos=33456 sysload=0.16 cputime=44.396 memavail=1641488 print_time=879.118 buffer_time=2.435 print_stall=10 extruder: target=215 temp=214.6 pwm=0.503
Stats 868.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=414798 bytes_read=315363 bytes_retransmit=9 bytes_invalid=0 send_seq=14810 receive_seq=14810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=55.2 pwm=0.541 rpi: temp=51.6 mcu_temp: temp=37.1 sd_pos=33516 sysload=0.16 cputime=44.453 memavail=1641488 print_time=879.734 buffer_time=2.049 print_stall=10 extruder: target=215 temp=214.7 pwm=0.501
Stats 869.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=415769 bytes_read=315799 bytes_retransmit=9 bytes_invalid=0 send_seq=14834 receive_seq=14834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996485 heater_bed: target=55 temp=55.2 pwm=0.208 rpi: temp=52.6 mcu_temp: temp=37.7 sd_pos=33665 sysload=0.16 cputime=44.514 memavail=1641556 print_time=881.018 buffer_time=2.330 print_stall=10 extruder: target=215 temp=214.6 pwm=0.567
Stats 870.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=416835 bytes_read=316226 bytes_retransmit=9 bytes_invalid=0 send_seq=14862 receive_seq=14862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996482 heater_bed: target=55 temp=55.2 pwm=0.066 rpi: temp=51.6 mcu_temp: temp=37.5 sd_pos=33816 sysload=0.16 cputime=44.576 memavail=1641496 print_time=882.332 buffer_time=2.640 print_stall=10 extruder: target=215 temp=214.6 pwm=0.540
Stats 871.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=417469 bytes_read=316633 bytes_retransmit=9 bytes_invalid=0 send_seq=14883 receive_seq=14883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=55.1 pwm=0.344 rpi: temp=51.6 mcu_temp: temp=37.8 sd_pos=33878 sysload=0.16 cputime=44.633 memavail=1641748 print_time=882.997 buffer_time=2.302 print_stall=10 extruder: target=215 temp=214.5 pwm=0.654
Stats 872.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=418535 bytes_read=317079 bytes_retransmit=9 bytes_invalid=0 send_seq=14909 receive_seq=14909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996481 heater_bed: target=55 temp=55.1 pwm=0.239 rpi: temp=51.6 mcu_temp: temp=37.6 sd_pos=34030 sysload=0.14 cputime=44.695 memavail=1641616 print_time=884.338 buffer_time=2.640 print_stall=10 extruder: target=215 temp=214.8 pwm=0.394
Stats 873.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=419149 bytes_read=317476 bytes_retransmit=9 bytes_invalid=0 send_seq=14928 receive_seq=14928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996479 heater_bed: target=55 temp=55.1 pwm=0.234 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=34089 sysload=0.14 cputime=44.752 memavail=1641628 print_time=884.989 buffer_time=2.287 print_stall=10 extruder: target=215 temp=214.7 pwm=0.488
Stats 874.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=420085 bytes_read=317888 bytes_retransmit=9 bytes_invalid=0 send_seq=14950 receive_seq=14950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996478 heater_bed: target=55 temp=55.0 pwm=0.510 rpi: temp=52.1 mcu_temp: temp=37.4 sd_pos=34238 sysload=0.14 cputime=44.812 memavail=1641628 print_time=886.286 buffer_time=2.581 print_stall=10 extruder: target=215 temp=214.8 pwm=0.488
Stats 875.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=420683 bytes_read=318294 bytes_retransmit=9 bytes_invalid=0 send_seq=14969 receive_seq=14968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=14 freq=71996476 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=50.1 mcu_temp: temp=37.7 sd_pos=34300 sysload=0.14 cputime=44.870 memavail=1641892 print_time=886.915 buffer_time=2.207 print_stall=10 extruder: target=215 temp=214.7 pwm=0.548
Stats 876.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=421706 bytes_read=318721 bytes_retransmit=9 bytes_invalid=0 send_seq=14996 receive_seq=14996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996474 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=37.7 sd_pos=34451 sysload=0.14 cputime=44.933 memavail=1641892 print_time=888.122 buffer_time=2.412 print_stall=10 extruder: target=215 temp=214.7 pwm=0.588
Stats 877.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=422327 bytes_read=319128 bytes_retransmit=9 bytes_invalid=0 send_seq=15014 receive_seq=15014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996473 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=52.1 mcu_temp: temp=37.8 sd_pos=34541 sysload=0.13 cputime=44.994 memavail=1642396 print_time=888.711 buffer_time=1.998 print_stall=10 extruder: target=215 temp=214.9 pwm=0.497
Stats 878.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=423263 bytes_read=319574 bytes_retransmit=9 bytes_invalid=0 send_seq=15040 receive_seq=15040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996471 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=52.1 mcu_temp: temp=37.8 sd_pos=34688 sysload=0.13 cputime=45.058 memavail=1642396 print_time=889.759 buffer_time=2.043 print_stall=10 extruder: target=215 temp=214.8 pwm=0.514
Stats 879.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=424278 bytes_read=319981 bytes_retransmit=9 bytes_invalid=0 send_seq=15064 receive_seq=15064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996475 heater_bed: target=55 temp=54.9 pwm=0.364 rpi: temp=51.6 mcu_temp: temp=37.8 sd_pos=34928 sysload=0.13 cputime=45.122 memavail=1642204 print_time=891.007 buffer_time=2.289 print_stall=10 extruder: target=215 temp=214.7 pwm=0.514
Stats 880.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=425900 bytes_read=320478 bytes_retransmit=9 bytes_invalid=0 send_seq=15100 receive_seq=15100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996473 heater_bed: target=55 temp=54.9 pwm=0.240 rpi: temp=51.6 mcu_temp: temp=37.7 sd_pos=35479 sysload=0.13 cputime=45.190 memavail=1642212 print_time=891.878 buffer_time=2.156 print_stall=10 extruder: target=215 temp=214.8 pwm=0.514
Stats 881.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=426760 bytes_read=320899 bytes_retransmit=9 bytes_invalid=0 send_seq=15124 receive_seq=15124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996475 heater_bed: target=55 temp=54.8 pwm=0.563 rpi: temp=52.1 mcu_temp: temp=37.5 sd_pos=35933 sysload=0.13 cputime=45.257 memavail=1642212 print_time=892.779 buffer_time=2.054 print_stall=10 extruder: target=215 temp=214.9 pwm=0.478
Stats 882.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=427716 bytes_read=321306 bytes_retransmit=9 bytes_invalid=0 send_seq=15148 receive_seq=15148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996474 heater_bed: target=55 temp=54.9 pwm=0.411 rpi: temp=50.6 mcu_temp: temp=37.6 sd_pos=36565 sysload=0.12 cputime=45.328 memavail=1642556 print_time=893.963 buffer_time=2.236 print_stall=10 extruder: target=215 temp=214.8 pwm=0.538
Stats 883.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=428725 bytes_read=321763 bytes_retransmit=9 bytes_invalid=0 send_seq=15174 receive_seq=15173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=55 temp=54.9 pwm=0.382 rpi: temp=51.1 mcu_temp: temp=37.5 sd_pos=36920 sysload=0.12 cputime=45.396 memavail=1642520 print_time=894.727 buffer_time=1.995 print_stall=10 extruder: target=215 temp=214.8 pwm=0.544
Stats 884.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=429600 bytes_read=322186 bytes_retransmit=9 bytes_invalid=0 send_seq=15198 receive_seq=15198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996477 heater_bed: target=55 temp=54.9 pwm=0.179 rpi: temp=51.6 mcu_temp: temp=37.7 sd_pos=37422 sysload=0.12 cputime=45.464 memavail=1642772 print_time=895.746 buffer_time=2.013 print_stall=10 extruder: target=215 temp=214.9 pwm=0.478
Stats 885.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=432958 bytes_read=322782 bytes_retransmit=9 bytes_invalid=0 send_seq=15262 receive_seq=15262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996480 heater_bed: target=55 temp=54.9 pwm=0.256 rpi: temp=51.6 mcu_temp: temp=37.5 sd_pos=38613 sysload=0.12 cputime=45.554 memavail=1642268 print_time=896.938 buffer_time=2.198 print_stall=10 extruder: target=215 temp=214.9 pwm=0.516
Stats 886.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=435078 bytes_read=323302 bytes_retransmit=9 bytes_invalid=0 send_seq=15305 receive_seq=15305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996479 heater_bed: target=55 temp=54.8 pwm=0.540 rpi: temp=51.6 mcu_temp: temp=37.9 sd_pos=39100 sysload=0.12 cputime=45.623 memavail=1642468 print_time=897.854 buffer_time=2.113 print_stall=10 extruder: target=215 temp=214.9 pwm=0.558
Stats 887.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=436212 bytes_read=323732 bytes_retransmit=9 bytes_invalid=0 send_seq=15333 receive_seq=15333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996478 heater_bed: target=55 temp=54.8 pwm=0.464 rpi: temp=51.1 mcu_temp: temp=37.2 sd_pos=39342 sysload=0.11 cputime=45.688 memavail=1642468 print_time=899.145 buffer_time=2.401 print_stall=10 extruder: target=215 temp=214.8 pwm=0.543
Stats 888.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000065 bytes_write=437154 bytes_read=324158 bytes_retransmit=9 bytes_invalid=0 send_seq=15359 receive_seq=15359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996476 heater_bed: target=55 temp=54.8 pwm=0.389 rpi: temp=51.6 mcu_temp: temp=38.0 sd_pos=39493 sysload=0.11 cputime=45.752 memavail=1642468 print_time=900.234 buffer_time=2.488 print_stall=10 extruder: target=215 temp=214.9 pwm=0.521
Stats 889.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000065 bytes_write=437779 bytes_read=324575 bytes_retransmit=9 bytes_invalid=0 send_seq=15379 receive_seq=15379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=55 temp=54.8 pwm=0.013 rpi: temp=51.1 mcu_temp: temp=37.1 sd_pos=39552 sysload=0.11 cputime=45.810 memavail=1642480 print_time=900.825 buffer_time=2.077 print_stall=10 extruder: target=215 temp=215.1 pwm=0.400
Stats 890.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000065 bytes_write=438768 bytes_read=325011 bytes_retransmit=9 bytes_invalid=0 send_seq=15406 receive_seq=15406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996472 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=37.9 sd_pos=39672 sysload=0.11 cputime=45.872 memavail=1642168 print_time=902.080 buffer_time=2.328 print_stall=10 extruder: target=215 temp=214.9 pwm=0.520
Stats 891.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000065 bytes_write=439790 bytes_read=325428 bytes_retransmit=9 bytes_invalid=0 send_seq=15432 receive_seq=15432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996472 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=37.7 sd_pos=39825 sysload=0.11 cputime=45.934 memavail=1641668 print_time=903.403 buffer_time=2.648 print_stall=10 extruder: target=215 temp=214.9 pwm=0.467
Stats 892.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000065 bytes_write=440413 bytes_read=325845 bytes_retransmit=9 bytes_invalid=0 send_seq=15452 receive_seq=15452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996470 heater_bed: target=55 temp=54.7 pwm=0.639 rpi: temp=51.6 mcu_temp: temp=37.7 sd_pos=39885 sysload=0.10 cputime=45.995 memavail=1642108 print_time=904.083 buffer_time=2.325 print_stall=10 extruder: target=215 temp=214.8 pwm=0.525
Stats 893.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=441064 bytes_read=326256 bytes_retransmit=9 bytes_invalid=0 send_seq=15471 receive_seq=15471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=55 temp=54.8 pwm=0.014 rpi: temp=51.6 mcu_temp: temp=37.5 sd_pos=39946 sysload=0.10 cputime=46.052 memavail=1642304 print_time=904.771 buffer_time=2.011 print_stall=10 extruder: target=215 temp=214.7 pwm=0.647
Stats 894.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=442081 bytes_read=326678 bytes_retransmit=9 bytes_invalid=0 send_seq=15498 receive_seq=15498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=54.8 pwm=0.084 rpi: temp=51.1 mcu_temp: temp=37.8 sd_pos=40097 sysload=0.10 cputime=46.098 memavail=1642304 print_time=906.163 buffer_time=2.399 print_stall=10 extruder: target=215 temp=214.9 pwm=0.445
Stats 895.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=442765 bytes_read=327100 bytes_retransmit=9 bytes_invalid=0 send_seq=15519 receive_seq=15519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=54.7 pwm=0.480 rpi: temp=51.6 mcu_temp: temp=37.8 sd_pos=40157 sysload=0.10 cputime=46.158 memavail=1641740 print_time=906.860 buffer_time=2.093 print_stall=10 extruder: target=215 temp=214.7 pwm=0.592
Stats 896.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=443722 bytes_read=327526 bytes_retransmit=9 bytes_invalid=0 send_seq=15544 receive_seq=15544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996468 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=37.7 sd_pos=40310 sysload=0.10 cputime=46.219 memavail=1641992 print_time=908.249 buffer_time=2.479 print_stall=10 extruder: target=215 temp=214.8 pwm=0.460
Stats 897.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=444325 bytes_read=327898 bytes_retransmit=9 bytes_invalid=0 send_seq=15561 receive_seq=15561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=54.7 pwm=0.330 rpi: temp=51.1 mcu_temp: temp=38.1 sd_pos=40401 sysload=0.09 cputime=46.277 memavail=1642244 print_time=908.932 buffer_time=2.160 print_stall=10 extruder: target=215 temp=214.8 pwm=0.552
Stats 898.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=445310 bytes_read=328374 bytes_retransmit=9 bytes_invalid=0 send_seq=15587 receive_seq=15587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996463 heater_bed: target=55 temp=54.7 pwm=0.304 rpi: temp=51.1 mcu_temp: temp=37.6 sd_pos=40522 sysload=0.09 cputime=46.340 memavail=1642244 print_time=910.264 buffer_time=2.487 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 899.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=445943 bytes_read=328751 bytes_retransmit=9 bytes_invalid=0 send_seq=15605 receive_seq=15605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.7 pwm=0.445 rpi: temp=51.6 mcu_temp: temp=37.5 sd_pos=40608 sysload=0.09 cputime=46.397 memavail=1642004 print_time=910.921 buffer_time=2.142 print_stall=10 extruder: target=215 temp=214.9 pwm=0.517
Stats 900.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=446905 bytes_read=329173 bytes_retransmit=9 bytes_invalid=0 send_seq=15629 receive_seq=15629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.7 pwm=0.295 rpi: temp=50.6 mcu_temp: temp=37.9 sd_pos=40759 sysload=0.09 cputime=46.461 memavail=1641996 print_time=912.130 buffer_time=2.346 print_stall=10 extruder: target=215 temp=215.1 pwm=0.437
Stats 901.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=447855 bytes_read=329614 bytes_retransmit=9 bytes_invalid=0 send_seq=15654 receive_seq=15654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.7 pwm=0.297 rpi: temp=52.1 mcu_temp: temp=38.0 sd_pos=40907 sysload=0.09 cputime=46.523 memavail=1641948 print_time=913.240 buffer_time=2.455 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 902.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=448682 bytes_read=330011 bytes_retransmit=9 bytes_invalid=0 send_seq=15676 receive_seq=15676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=41057 sysload=0.17 cputime=46.585 memavail=1641956 print_time=914.221 buffer_time=2.433 print_stall=10 extruder: target=215 temp=215.1 pwm=0.484
Stats 903.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=449649 bytes_read=330453 bytes_retransmit=9 bytes_invalid=0 send_seq=15701 receive_seq=15701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.7 pwm=0.458 rpi: temp=51.1 mcu_temp: temp=37.8 sd_pos=41396 sysload=0.17 cputime=46.647 memavail=1641704 print_time=914.994 buffer_time=2.204 print_stall=10 extruder: target=215 temp=215.0 pwm=0.488
Stats 904.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=450949 bytes_read=330929 bytes_retransmit=9 bytes_invalid=0 send_seq=15733 receive_seq=15733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=42243 sysload=0.17 cputime=46.718 memavail=1641936 print_time=916.029 buffer_time=2.235 print_stall=10 extruder: target=215 temp=215.0 pwm=0.528
Stats 905.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=451876 bytes_read=331336 bytes_retransmit=9 bytes_invalid=0 send_seq=15757 receive_seq=15757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=54.7 pwm=0.194 rpi: temp=51.1 mcu_temp: temp=38.1 sd_pos=43028 sysload=0.17 cputime=46.788 memavail=1641712 print_time=917.030 buffer_time=2.233 print_stall=10 extruder: target=215 temp=215.1 pwm=0.437
Stats 906.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=452983 bytes_read=331789 bytes_retransmit=9 bytes_invalid=0 send_seq=15785 receive_seq=15785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=55 temp=54.8 pwm=0.147 rpi: temp=51.6 mcu_temp: temp=37.9 sd_pos=43687 sysload=0.17 cputime=46.860 memavail=1641724 print_time=917.833 buffer_time=2.033 print_stall=10 extruder: target=215 temp=215.3 pwm=0.427
Stats 907.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=453939 bytes_read=332240 bytes_retransmit=9 bytes_invalid=0 send_seq=15812 receive_seq=15812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.7 pwm=0.478 rpi: temp=51.6 mcu_temp: temp=37.8 sd_pos=44487 sysload=0.23 cputime=46.933 memavail=1641908 print_time=918.892 buffer_time=2.089 print_stall=10 extruder: target=215 temp=215.2 pwm=0.469
Stats 908.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=454920 bytes_read=332667 bytes_retransmit=9 bytes_invalid=0 send_seq=15837 receive_seq=15837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.6 pwm=0.530 rpi: temp=51.6 mcu_temp: temp=37.7 sd_pos=45470 sysload=0.23 cputime=46.988 memavail=1642160 print_time=919.984 buffer_time=2.178 print_stall=10 extruder: target=215 temp=215.2 pwm=0.464
Stats 909.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=458150 bytes_read=333279 bytes_retransmit=9 bytes_invalid=0 send_seq=15899 receive_seq=15899 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=54.7 pwm=0.092 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=47154 sysload=0.23 cputime=47.076 memavail=1642472 print_time=920.900 buffer_time=2.094 print_stall=10 extruder: target=215 temp=215.1 pwm=0.558
Stats 910.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=460082 bytes_read=333800 bytes_retransmit=9 bytes_invalid=0 send_seq=15940 receive_seq=15940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=54.6 pwm=0.612 rpi: temp=50.6 mcu_temp: temp=38.0 sd_pos=47613 sysload=0.23 cputime=47.147 memavail=1642168 print_time=922.098 buffer_time=2.287 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 911.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=460896 bytes_read=334202 bytes_retransmit=9 bytes_invalid=0 send_seq=15963 receive_seq=15963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=54.7 pwm=0.441 rpi: temp=52.6 mcu_temp: temp=38.3 sd_pos=47825 sysload=0.23 cputime=47.208 memavail=1642420 print_time=923.049 buffer_time=2.236 print_stall=10 extruder: target=215 temp=215.2 pwm=0.426
Stats 912.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=461805 bytes_read=334644 bytes_retransmit=9 bytes_invalid=0 send_seq=15988 receive_seq=15988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=54.7 pwm=0.052 rpi: temp=52.1 mcu_temp: temp=38.0 sd_pos=47978 sysload=0.29 cputime=47.254 memavail=1641664 print_time=924.166 buffer_time=2.348 print_stall=10 extruder: target=215 temp=215.1 pwm=0.519
Stats 913.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=462754 bytes_read=335090 bytes_retransmit=9 bytes_invalid=0 send_seq=16014 receive_seq=16014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=38.0 sd_pos=48099 sysload=0.29 cputime=47.317 memavail=1641976 print_time=925.406 buffer_time=2.587 print_stall=10 extruder: target=215 temp=215.0 pwm=0.519
Stats 914.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=463389 bytes_read=335487 bytes_retransmit=9 bytes_invalid=0 send_seq=16036 receive_seq=16036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996468 heater_bed: target=55 temp=54.7 pwm=0.236 rpi: temp=52.1 mcu_temp: temp=38.1 sd_pos=48189 sysload=0.29 cputime=47.379 memavail=1641972 print_time=926.075 buffer_time=2.254 print_stall=10 extruder: target=215 temp=215.1 pwm=0.408
Stats 915.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=464401 bytes_read=335929 bytes_retransmit=9 bytes_invalid=0 send_seq=16061 receive_seq=16061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=54.7 pwm=0.056 rpi: temp=51.1 mcu_temp: temp=37.7 sd_pos=48309 sysload=0.29 cputime=47.443 memavail=1642224 print_time=927.424 buffer_time=2.600 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 916.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=465059 bytes_read=336345 bytes_retransmit=9 bytes_invalid=0 send_seq=16084 receive_seq=16084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=54.7 pwm=0.501 rpi: temp=51.6 mcu_temp: temp=38.0 sd_pos=48402 sysload=0.29 cputime=47.504 memavail=1642284 print_time=928.133 buffer_time=2.308 print_stall=10 extruder: target=215 temp=214.8 pwm=0.573
Stats 917.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=465696 bytes_read=336727 bytes_retransmit=9 bytes_invalid=0 send_seq=16103 receive_seq=16103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=54.7 pwm=0.179 rpi: temp=51.6 mcu_temp: temp=38.1 sd_pos=48461 sysload=0.35 cputime=47.545 memavail=1642528 print_time=928.840 buffer_time=2.011 print_stall=10 extruder: target=215 temp=214.8 pwm=0.573
Stats 918.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=466716 bytes_read=337184 bytes_retransmit=9 bytes_invalid=0 send_seq=16128 receive_seq=16128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=55 temp=54.7 pwm=0.175 rpi: temp=52.1 mcu_temp: temp=37.4 sd_pos=48612 sysload=0.35 cputime=47.610 memavail=1642604 print_time=930.285 buffer_time=2.454 print_stall=10 extruder: target=215 temp=214.7 pwm=0.616
Stats 919.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=467348 bytes_read=337590 bytes_retransmit=9 bytes_invalid=0 send_seq=16149 receive_seq=16149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=55 temp=54.7 pwm=0.320 rpi: temp=52.6 mcu_temp: temp=38.0 sd_pos=48674 sysload=0.35 cputime=47.670 memavail=1642360 print_time=931.011 buffer_time=2.178 print_stall=10 extruder: target=215 temp=214.7 pwm=0.556
Stats 920.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=468371 bytes_read=338017 bytes_retransmit=9 bytes_invalid=0 send_seq=16177 receive_seq=16177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=54.7 pwm=0.311 rpi: temp=51.6 mcu_temp: temp=37.9 sd_pos=48826 sysload=0.35 cputime=47.719 memavail=1642612 print_time=932.461 buffer_time=2.625 print_stall=10 extruder: target=215 temp=214.8 pwm=0.473
Stats 921.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=469013 bytes_read=338444 bytes_retransmit=9 bytes_invalid=0 send_seq=16199 receive_seq=16199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=54.7 pwm=0.378 rpi: temp=52.6 mcu_temp: temp=37.7 sd_pos=48884 sysload=0.35 cputime=47.778 memavail=1642360 print_time=933.178 buffer_time=2.340 print_stall=10 extruder: target=215 temp=214.8 pwm=0.548
Stats 922.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=469623 bytes_read=338835 bytes_retransmit=9 bytes_invalid=0 send_seq=16217 receive_seq=16217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.7 pwm=0.222 rpi: temp=51.6 mcu_temp: temp=38.0 sd_pos=48974 sysload=0.48 cputime=47.822 memavail=1642356 print_time=933.888 buffer_time=2.047 print_stall=10 extruder: target=215 temp=214.8 pwm=0.577
Stats 923.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=470699 bytes_read=339282 bytes_retransmit=9 bytes_invalid=0 send_seq=16246 receive_seq=16246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.7 pwm=0.368 rpi: temp=51.1 mcu_temp: temp=38.1 sd_pos=49092 sysload=0.48 cputime=47.885 memavail=1641860 print_time=935.271 buffer_time=2.431 print_stall=10 extruder: target=215 temp=214.9 pwm=0.474
Stats 924.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=471309 bytes_read=339699 bytes_retransmit=9 bytes_invalid=0 send_seq=16266 receive_seq=16266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.7 pwm=0.374 rpi: temp=51.1 mcu_temp: temp=37.8 sd_pos=49181 sysload=0.48 cputime=47.948 memavail=1642104 print_time=935.953 buffer_time=2.112 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 925.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=472350 bytes_read=340135 bytes_retransmit=9 bytes_invalid=0 send_seq=16293 receive_seq=16293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=54.7 pwm=0.382 rpi: temp=52.1 mcu_temp: temp=37.9 sd_pos=49333 sysload=0.48 cputime=48.015 memavail=1642292 print_time=937.214 buffer_time=2.372 print_stall=10 extruder: target=215 temp=215.0 pwm=0.482
Stats 926.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=473325 bytes_read=340557 bytes_retransmit=9 bytes_invalid=0 send_seq=16320 receive_seq=16320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=54.7 pwm=0.562 rpi: temp=51.6 mcu_temp: temp=38.2 sd_pos=49455 sysload=0.48 cputime=48.082 memavail=1642304 print_time=938.376 buffer_time=2.534 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 927.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=473933 bytes_read=340989 bytes_retransmit=9 bytes_invalid=0 send_seq=16343 receive_seq=16343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.8 pwm=0.183 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=49515 sysload=0.53 cputime=48.148 memavail=1642308 print_time=938.906 buffer_time=2.063 print_stall=10 extruder: target=215 temp=215.1 pwm=0.460
Stats 928.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=475053 bytes_read=341445 bytes_retransmit=9 bytes_invalid=0 send_seq=16371 receive_seq=16371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=54.8 pwm=0.249 rpi: temp=52.1 mcu_temp: temp=38.2 sd_pos=49754 sysload=0.53 cputime=48.217 memavail=1642056 print_time=940.203 buffer_time=2.360 print_stall=10 extruder: target=215 temp=215.0 pwm=0.548
Stats 929.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=476254 bytes_read=341877 bytes_retransmit=9 bytes_invalid=0 send_seq=16401 receive_seq=16400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.7 pwm=0.425 rpi: temp=53.1 mcu_temp: temp=38.0 sd_pos=50469 sysload=0.53 cputime=48.285 memavail=1642296 print_time=941.016 buffer_time=2.171 print_stall=10 extruder: target=215 temp=215.1 pwm=0.546
Stats 930.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=477109 bytes_read=342319 bytes_retransmit=9 bytes_invalid=0 send_seq=16425 receive_seq=16425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.8 pwm=0.167 rpi: temp=52.1 mcu_temp: temp=38.0 sd_pos=51246 sysload=0.53 cputime=48.363 memavail=1642308 print_time=942.055 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.2 pwm=0.495
Stats 931.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=478263 bytes_read=342745 bytes_retransmit=9 bytes_invalid=0 send_seq=16455 receive_seq=16450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.8 pwm=0.311 rpi: temp=51.1 mcu_temp: temp=38.2 sd_pos=52090 sysload=0.53 cputime=48.438 memavail=1642308 print_time=943.076 buffer_time=2.229 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 932.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=479081 bytes_read=343177 bytes_retransmit=9 bytes_invalid=0 send_seq=16479 receive_seq=16479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=54.8 pwm=0.180 rpi: temp=51.1 mcu_temp: temp=38.0 sd_pos=52711 sysload=0.56 cputime=48.509 memavail=1642308 print_time=943.968 buffer_time=2.120 print_stall=10 extruder: target=215 temp=215.1 pwm=0.529
Stats 933.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=480062 bytes_read=343634 bytes_retransmit=9 bytes_invalid=0 send_seq=16504 receive_seq=16504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=54.8 pwm=0.021 rpi: temp=52.1 mcu_temp: temp=38.2 sd_pos=53544 sysload=0.56 cputime=48.586 memavail=1642564 print_time=945.065 buffer_time=2.217 print_stall=10 extruder: target=215 temp=215.0 pwm=0.629
Stats 934.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=482425 bytes_read=344170 bytes_retransmit=9 bytes_invalid=0 send_seq=16551 receive_seq=16551 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=54.8 pwm=0.258 rpi: temp=51.6 mcu_temp: temp=38.4 sd_pos=54902 sysload=0.56 cputime=48.675 memavail=1642884 print_time=945.926 buffer_time=2.078 print_stall=10 extruder: target=215 temp=215.2 pwm=0.506
Stats 935.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=484956 bytes_read=344712 bytes_retransmit=9 bytes_invalid=0 send_seq=16602 receive_seq=16602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=54.7 pwm=0.310 rpi: temp=52.1 mcu_temp: temp=38.0 sd_pos=55960 sysload=0.56 cputime=48.733 memavail=1642884 print_time=946.864 buffer_time=2.015 print_stall=10 extruder: target=215 temp=215.2 pwm=0.506
Stats 936.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=486025 bytes_read=345164 bytes_retransmit=9 bytes_invalid=0 send_seq=16629 receive_seq=16629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=54.7 pwm=0.452 rpi: temp=51.1 mcu_temp: temp=38.5 sd_pos=56171 sysload=0.56 cputime=48.804 memavail=1642884 print_time=948.208 buffer_time=2.358 print_stall=10 extruder: target=215 temp=215.2 pwm=0.443
Stats 937.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=486984 bytes_read=345595 bytes_retransmit=9 bytes_invalid=0 send_seq=16655 receive_seq=16655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=54.8 pwm=0.298 rpi: temp=51.6 mcu_temp: temp=38.3 sd_pos=56323 sysload=0.68 cputime=48.874 memavail=1642944 print_time=949.351 buffer_time=2.501 print_stall=10 extruder: target=215 temp=215.1 pwm=0.560
Stats 938.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000065 bytes_write=487537 bytes_read=345982 bytes_retransmit=9 bytes_invalid=0 send_seq=16672 receive_seq=16672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=54.7 pwm=0.356 rpi: temp=51.6 mcu_temp: temp=38.4 sd_pos=56415 sysload=0.68 cputime=48.934 memavail=1642692 print_time=949.981 buffer_time=2.130 print_stall=10 extruder: target=215 temp=215.1 pwm=0.497
Stats 939.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000065 bytes_write=488514 bytes_read=346424 bytes_retransmit=9 bytes_invalid=0 send_seq=16697 receive_seq=16697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=54.8 pwm=0.112 rpi: temp=51.6 mcu_temp: temp=38.3 sd_pos=56565 sysload=0.68 cputime=49.001 memavail=1642948 print_time=951.292 buffer_time=2.440 print_stall=10 extruder: target=215 temp=215.1 pwm=0.479
Stats 940.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000065 bytes_write=489191 bytes_read=346830 bytes_retransmit=9 bytes_invalid=0 send_seq=16718 receive_seq=16718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=38.0 sd_pos=56624 sysload=0.68 cputime=49.063 memavail=1642392 print_time=951.985 buffer_time=2.133 print_stall=10 extruder: target=215 temp=214.9 pwm=0.573
Stats 941.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000065 bytes_write=490128 bytes_read=347232 bytes_retransmit=9 bytes_invalid=0 send_seq=16741 receive_seq=16741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=54.9 pwm=0.011 rpi: temp=52.6 mcu_temp: temp=38.5 sd_pos=56774 sysload=0.68 cputime=49.126 memavail=1642140 print_time=953.417 buffer_time=2.562 print_stall=10 extruder: target=215 temp=214.8 pwm=0.573
Stats 942.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000065 bytes_write=490795 bytes_read=347659 bytes_retransmit=9 bytes_invalid=0 send_seq=16763 receive_seq=16763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=54.7 pwm=0.493 rpi: temp=52.1 mcu_temp: temp=38.3 sd_pos=56836 sysload=0.78 cputime=49.187 memavail=1641888 print_time=954.152 buffer_time=2.295 print_stall=10 extruder: target=215 temp=214.8 pwm=0.567
Stats 943.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=491446 bytes_read=348075 bytes_retransmit=9 bytes_invalid=0 send_seq=16783 receive_seq=16783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=54.8 pwm=0.142 rpi: temp=52.1 mcu_temp: temp=38.3 sd_pos=56897 sysload=0.78 cputime=49.249 memavail=1641888 print_time=954.894 buffer_time=2.037 print_stall=10 extruder: target=215 temp=214.7 pwm=0.593
Stats 944.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=492463 bytes_read=348491 bytes_retransmit=9 bytes_invalid=0 send_seq=16810 receive_seq=16810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=54.8 pwm=0.458 rpi: temp=51.1 mcu_temp: temp=38.6 sd_pos=57054 sysload=0.78 cputime=49.312 memavail=1642140 print_time=956.396 buffer_time=2.536 print_stall=10 extruder: target=215 temp=214.8 pwm=0.551
Stats 945.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=493090 bytes_read=348891 bytes_retransmit=9 bytes_invalid=0 send_seq=16829 receive_seq=16829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=54.7 pwm=0.492 rpi: temp=51.6 mcu_temp: temp=38.1 sd_pos=57118 sysload=0.78 cputime=49.372 memavail=1641888 print_time=957.150 buffer_time=2.289 print_stall=10 extruder: target=215 temp=214.9 pwm=0.512
Stats 946.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=493799 bytes_read=349296 bytes_retransmit=9 bytes_invalid=0 send_seq=16852 receive_seq=16852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=54.8 pwm=0.420 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=57211 sysload=0.78 cputime=49.436 memavail=1642152 print_time=957.903 buffer_time=2.041 print_stall=10 extruder: target=215 temp=214.9 pwm=0.460
Stats 947.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=494812 bytes_read=349708 bytes_retransmit=9 bytes_invalid=0 send_seq=16879 receive_seq=16879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996456 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=38.6 sd_pos=57336 sysload=0.96 cputime=49.485 memavail=1642596 print_time=959.395 buffer_time=2.532 print_stall=10 extruder: target=215 temp=215.0 pwm=0.523
Stats 948.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=495462 bytes_read=350147 bytes_retransmit=9 bytes_invalid=0 send_seq=16901 receive_seq=16901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=54.6 pwm=1.000 rpi: temp=52.1 mcu_temp: temp=38.2 sd_pos=57430 sysload=0.96 cputime=49.547 memavail=1642596 print_time=960.145 buffer_time=2.281 print_stall=10 extruder: target=215 temp=215.1 pwm=0.401
Stats 949.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=496464 bytes_read=350568 bytes_retransmit=9 bytes_invalid=0 send_seq=16925 receive_seq=16925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=54.8 pwm=0.239 rpi: temp=52.1 mcu_temp: temp=38.1 sd_pos=57553 sysload=0.96 cputime=49.597 memavail=1642596 print_time=961.562 buffer_time=2.697 print_stall=10 extruder: target=215 temp=215.1 pwm=0.505
Stats 950.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=497052 bytes_read=350945 bytes_retransmit=9 bytes_invalid=0 send_seq=16943 receive_seq=16943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=54.8 pwm=0.294 rpi: temp=51.6 mcu_temp: temp=38.3 sd_pos=57643 sysload=0.96 cputime=49.655 memavail=1642296 print_time=962.267 buffer_time=2.399 print_stall=10 extruder: target=215 temp=215.1 pwm=0.441
Stats 951.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=497663 bytes_read=351371 bytes_retransmit=9 bytes_invalid=0 send_seq=16962 receive_seq=16962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=54.8 pwm=0.143 rpi: temp=51.6 mcu_temp: temp=38.5 sd_pos=57705 sysload=0.96 cputime=49.715 memavail=1642244 print_time=962.928 buffer_time=2.059 print_stall=10 extruder: target=215 temp=215.2 pwm=0.447
Stats 952.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=498589 bytes_read=351783 bytes_retransmit=9 bytes_invalid=0 send_seq=16987 receive_seq=16987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=54.8 pwm=0.359 rpi: temp=51.1 mcu_temp: temp=38.1 sd_pos=57893 sysload=0.97 cputime=49.766 memavail=1641620 print_time=964.198 buffer_time=2.327 print_stall=10 extruder: target=215 temp=215.2 pwm=0.426
Stats 953.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=499528 bytes_read=352215 bytes_retransmit=9 bytes_invalid=0 send_seq=17013 receive_seq=17013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=38.2 sd_pos=58045 sysload=0.97 cputime=49.828 memavail=1641888 print_time=965.348 buffer_time=2.477 print_stall=10 extruder: target=215 temp=215.0 pwm=0.617
Stats 954.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=500354 bytes_read=352661 bytes_retransmit=9 bytes_invalid=0 send_seq=17036 receive_seq=17036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.8 pwm=0.461 rpi: temp=52.1 mcu_temp: temp=37.9 sd_pos=58197 sysload=0.97 cputime=49.892 memavail=1641560 print_time=966.313 buffer_time=2.440 print_stall=10 extruder: target=215 temp=215.4 pwm=0.423
Stats 955.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=501330 bytes_read=353083 bytes_retransmit=9 bytes_invalid=0 send_seq=17063 receive_seq=17063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.8 pwm=0.345 rpi: temp=50.6 mcu_temp: temp=38.2 sd_pos=58384 sysload=0.97 cputime=49.954 memavail=1641544 print_time=967.097 buffer_time=2.224 print_stall=10 extruder: target=215 temp=215.3 pwm=0.464
Stats 956.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=502956 bytes_read=353545 bytes_retransmit=9 bytes_invalid=0 send_seq=17098 receive_seq=17098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.8 pwm=0.263 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=58978 sysload=0.97 cputime=50.019 memavail=1641560 print_time=968.042 buffer_time=2.168 print_stall=10 extruder: target=215 temp=215.3 pwm=0.524
Stats 957.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=503843 bytes_read=353986 bytes_retransmit=9 bytes_invalid=0 send_seq=17120 receive_seq=17120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=54.9 pwm=0.059 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=59774 sysload=1.05 cputime=50.092 memavail=1641572 print_time=969.052 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.3 pwm=0.456
Stats 958.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=504638 bytes_read=354398 bytes_retransmit=9 bytes_invalid=0 send_seq=17142 receive_seq=17142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=54.8 pwm=0.306 rpi: temp=52.6 mcu_temp: temp=38.1 sd_pos=60433 sysload=1.05 cputime=50.163 memavail=1641824 print_time=969.928 buffer_time=2.050 print_stall=10 extruder: target=215 temp=215.3 pwm=0.492
Stats 959.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=505822 bytes_read=354835 bytes_retransmit=9 bytes_invalid=0 send_seq=17169 receive_seq=17169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=54.7 pwm=0.597 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=61306 sysload=1.05 cputime=50.238 memavail=1641572 print_time=971.089 buffer_time=2.208 print_stall=10 extruder: target=215 temp=215.3 pwm=0.492
Stats 960.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=506654 bytes_read=355266 bytes_retransmit=9 bytes_invalid=0 send_seq=17192 receive_seq=17192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=54.8 pwm=0.170 rpi: temp=51.1 mcu_temp: temp=38.7 sd_pos=61989 sysload=1.05 cputime=50.309 memavail=1641824 print_time=971.941 buffer_time=2.060 print_stall=10 extruder: target=215 temp=215.2 pwm=0.553
Stats 961.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=508384 bytes_read=355733 bytes_retransmit=9 bytes_invalid=0 send_seq=17228 receive_seq=17228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996454 heater_bed: target=55 temp=54.9 pwm=0.102 rpi: temp=52.1 mcu_temp: temp=38.3 sd_pos=63296 sysload=1.05 cputime=50.391 memavail=1641572 print_time=973.086 buffer_time=2.203 print_stall=10 extruder: target=215 temp=215.1 pwm=0.573
Stats 962.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=511773 bytes_read=356345 bytes_retransmit=9 bytes_invalid=0 send_seq=17291 receive_seq=17290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=54.8 pwm=0.462 rpi: temp=51.6 mcu_temp: temp=38.0 sd_pos=64856 sysload=1.12 cputime=50.452 memavail=1641192 print_time=974.290 buffer_time=2.405 print_stall=10 extruder: target=215 temp=215.1 pwm=0.582
Stats 963.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=512645 bytes_read=356796 bytes_retransmit=9 bytes_invalid=0 send_seq=17314 receive_seq=17314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=54.7 pwm=0.620 rpi: temp=51.6 mcu_temp: temp=38.3 sd_pos=65013 sysload=1.12 cputime=50.516 memavail=1641328 print_time=975.144 buffer_time=2.258 print_stall=10 extruder: target=215 temp=215.2 pwm=0.448
Stats 964.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=513572 bytes_read=357203 bytes_retransmit=9 bytes_invalid=0 send_seq=17339 receive_seq=17338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=55 temp=54.8 pwm=0.289 rpi: temp=52.6 mcu_temp: temp=38.3 sd_pos=65167 sysload=1.12 cputime=50.580 memavail=1641328 print_time=976.229 buffer_time=2.342 print_stall=10 extruder: target=215 temp=215.1 pwm=0.542
Stats 965.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=514524 bytes_read=357651 bytes_retransmit=9 bytes_invalid=0 send_seq=17365 receive_seq=17365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996456 heater_bed: target=55 temp=54.9 pwm=0.252 rpi: temp=51.1 mcu_temp: temp=38.2 sd_pos=65323 sysload=1.12 cputime=50.647 memavail=1641344 print_time=977.458 buffer_time=2.571 print_stall=10 extruder: target=215 temp=215.1 pwm=0.550
Stats 966.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=515155 bytes_read=358072 bytes_retransmit=9 bytes_invalid=0 send_seq=17386 receive_seq=17386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=65386 sysload=1.12 cputime=50.706 memavail=1641596 print_time=978.122 buffer_time=2.233 print_stall=10 extruder: target=215 temp=214.9 pwm=0.634
Stats 967.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=516151 bytes_read=358484 bytes_retransmit=9 bytes_invalid=0 send_seq=17411 receive_seq=17411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=38.7 sd_pos=65541 sysload=1.20 cputime=50.771 memavail=1641284 print_time=979.528 buffer_time=2.638 print_stall=10 extruder: target=215 temp=214.9 pwm=0.580
Stats 968.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=516746 bytes_read=358901 bytes_retransmit=9 bytes_invalid=0 send_seq=17431 receive_seq=17431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=54.8 pwm=0.580 rpi: temp=51.1 mcu_temp: temp=38.3 sd_pos=65603 sysload=1.20 cputime=50.828 memavail=1641540 print_time=980.248 buffer_time=2.357 print_stall=10 extruder: target=215 temp=215.0 pwm=0.528
Stats 969.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=517400 bytes_read=359317 bytes_retransmit=9 bytes_invalid=0 send_seq=17451 receive_seq=17451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=54.8 pwm=0.451 rpi: temp=51.1 mcu_temp: temp=38.6 sd_pos=65666 sysload=1.20 cputime=50.886 memavail=1641920 print_time=980.990 buffer_time=2.098 print_stall=10 extruder: target=215 temp=214.9 pwm=0.528
Stats 970.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=518396 bytes_read=359734 bytes_retransmit=9 bytes_invalid=0 send_seq=17477 receive_seq=17477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=54.8 pwm=0.282 rpi: temp=52.1 mcu_temp: temp=38.5 sd_pos=65822 sysload=1.20 cputime=50.949 memavail=1641924 print_time=982.514 buffer_time=2.621 print_stall=10 extruder: target=215 temp=214.9 pwm=0.494
Stats 971.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=519045 bytes_read=360141 bytes_retransmit=9 bytes_invalid=0 send_seq=17498 receive_seq=17498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=54.8 pwm=0.357 rpi: temp=53.6 mcu_temp: temp=38.5 sd_pos=65884 sysload=1.20 cputime=50.996 memavail=1641864 print_time=983.287 buffer_time=2.393 print_stall=10 extruder: target=215 temp=215.0 pwm=0.471
Stats 972.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=519691 bytes_read=360557 bytes_retransmit=9 bytes_invalid=0 send_seq=17518 receive_seq=17518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=54.8 pwm=0.145 rpi: temp=52.1 mcu_temp: temp=38.3 sd_pos=65980 sysload=1.26 cputime=51.059 memavail=1641924 print_time=984.073 buffer_time=2.178 print_stall=10 extruder: target=215 temp=214.9 pwm=0.470
Stats 973.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=520716 bytes_read=360994 bytes_retransmit=9 bytes_invalid=0 send_seq=17545 receive_seq=17545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=38.7 sd_pos=66105 sysload=1.26 cputime=51.123 memavail=1641924 print_time=985.628 buffer_time=2.731 print_stall=10 extruder: target=215 temp=214.9 pwm=0.481
Stats 974.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=521353 bytes_read=361406 bytes_retransmit=9 bytes_invalid=0 send_seq=17567 receive_seq=17567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=54.9 pwm=0.118 rpi: temp=51.6 mcu_temp: temp=38.9 sd_pos=66197 sysload=1.26 cputime=51.185 memavail=1641672 print_time=986.418 buffer_time=2.520 print_stall=10 extruder: target=215 temp=215.0 pwm=0.424
Stats 975.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=521998 bytes_read=361827 bytes_retransmit=9 bytes_invalid=0 send_seq=17588 receive_seq=17588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996454 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=51.6 mcu_temp: temp=38.6 sd_pos=66261 sysload=1.26 cputime=51.247 memavail=1641932 print_time=987.184 buffer_time=2.284 print_stall=10 extruder: target=215 temp=214.8 pwm=0.565
Stats 976.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=522639 bytes_read=362204 bytes_retransmit=9 bytes_invalid=0 send_seq=17606 receive_seq=17606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=51.6 mcu_temp: temp=38.2 sd_pos=66321 sysload=1.26 cputime=51.306 memavail=1641680 print_time=987.952 buffer_time=2.051 print_stall=10 extruder: target=215 temp=215.0 pwm=0.413
Stats 977.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=523670 bytes_read=362646 bytes_retransmit=9 bytes_invalid=0 send_seq=17634 receive_seq=17634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=66477 sysload=1.24 cputime=51.368 memavail=1641680 print_time=989.460 buffer_time=2.557 print_stall=10 extruder: target=215 temp=215.0 pwm=0.491
Stats 978.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=524301 bytes_read=363082 bytes_retransmit=9 bytes_invalid=0 send_seq=17655 receive_seq=17655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=51.6 mcu_temp: temp=38.6 sd_pos=66541 sysload=1.24 cputime=51.430 memavail=1641872 print_time=990.193 buffer_time=2.288 print_stall=10 extruder: target=215 temp=215.0 pwm=0.488
Stats 979.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=524962 bytes_read=363469 bytes_retransmit=9 bytes_invalid=0 send_seq=17675 receive_seq=17675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=53.1 mcu_temp: temp=38.6 sd_pos=66633 sysload=1.24 cputime=51.490 memavail=1641620 print_time=990.920 buffer_time=2.015 print_stall=10 extruder: target=215 temp=214.9 pwm=0.590
Stats 980.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=525906 bytes_read=363901 bytes_retransmit=9 bytes_invalid=0 send_seq=17698 receive_seq=17698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=54.9 pwm=0.379 rpi: temp=51.1 mcu_temp: temp=38.8 sd_pos=66787 sysload=1.24 cputime=51.555 memavail=1641936 print_time=992.278 buffer_time=2.371 print_stall=10 extruder: target=215 temp=215.0 pwm=0.510
Stats 981.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=526516 bytes_read=364297 bytes_retransmit=9 bytes_invalid=0 send_seq=17717 receive_seq=17717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=54.9 pwm=0.302 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=66851 sysload=1.24 cputime=51.601 memavail=1642300 print_time=992.924 buffer_time=2.017 print_stall=10 extruder: target=215 temp=215.0 pwm=0.549
Stats 982.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=527420 bytes_read=364709 bytes_retransmit=9 bytes_invalid=0 send_seq=17742 receive_seq=17742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=54.9 pwm=0.045 rpi: temp=52.6 mcu_temp: temp=38.5 sd_pos=67005 sysload=1.22 cputime=51.668 memavail=1643064 print_time=994.127 buffer_time=2.218 print_stall=10 extruder: target=215 temp=215.2 pwm=0.381
Stats 983.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=528302 bytes_read=365161 bytes_retransmit=9 bytes_invalid=0 send_seq=17766 receive_seq=17766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=54.8 pwm=0.453 rpi: temp=52.6 mcu_temp: temp=38.6 sd_pos=67158 sysload=1.22 cputime=51.732 memavail=1642568 print_time=995.148 buffer_time=2.236 print_stall=10 extruder: target=215 temp=215.1 pwm=0.436
Stats 984.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=529160 bytes_read=365577 bytes_retransmit=9 bytes_invalid=0 send_seq=17789 receive_seq=17789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=54.9 pwm=0.112 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=67346 sysload=1.22 cputime=51.796 memavail=1642560 print_time=995.980 buffer_time=2.067 print_stall=10 extruder: target=215 temp=214.9 pwm=0.614
Stats 985.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=530779 bytes_read=366034 bytes_retransmit=9 bytes_invalid=0 send_seq=17823 receive_seq=17823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=54.9 pwm=0.357 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=67906 sysload=1.22 cputime=51.864 memavail=1642564 print_time=996.942 buffer_time=2.027 print_stall=10 extruder: target=215 temp=215.2 pwm=0.465
Stats 986.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=531637 bytes_read=366466 bytes_retransmit=9 bytes_invalid=0 send_seq=17846 receive_seq=17846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=54.9 pwm=0.219 rpi: temp=51.1 mcu_temp: temp=38.4 sd_pos=68403 sysload=1.22 cputime=51.932 memavail=1642320 print_time=998.058 buffer_time=2.143 print_stall=10 extruder: target=215 temp=215.2 pwm=0.485
Stats 987.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=532561 bytes_read=366887 bytes_retransmit=9 bytes_invalid=0 send_seq=17870 receive_seq=17870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=51.6 mcu_temp: temp=38.6 sd_pos=68995 sysload=1.28 cputime=52.003 memavail=1642320 print_time=999.264 buffer_time=2.347 print_stall=10 extruder: target=215 temp=215.0 pwm=0.605
Stats 988.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=533834 bytes_read=367324 bytes_retransmit=9 bytes_invalid=0 send_seq=17898 receive_seq=17897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996454 heater_bed: target=55 temp=54.9 pwm=0.324 rpi: temp=51.6 mcu_temp: temp=39.1 sd_pos=69369 sysload=1.28 cputime=52.075 memavail=1642328 print_time=1000.095 buffer_time=2.177 print_stall=10 extruder: target=215 temp=215.1 pwm=0.565
Stats 989.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=534558 bytes_read=367746 bytes_retransmit=9 bytes_invalid=0 send_seq=17918 receive_seq=17918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=54.9 pwm=0.372 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=69778 sysload=1.28 cputime=52.142 memavail=1642328 print_time=1000.976 buffer_time=2.056 print_stall=10 extruder: target=215 temp=215.1 pwm=0.519
Stats 990.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=536385 bytes_read=368242 bytes_retransmit=9 bytes_invalid=0 send_seq=17957 receive_seq=17957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=51.1 mcu_temp: temp=38.6 sd_pos=70644 sysload=1.28 cputime=52.219 memavail=1642580 print_time=1002.211 buffer_time=2.291 print_stall=10 extruder: target=215 temp=215.3 pwm=0.375
Stats 991.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=539105 bytes_read=368799 bytes_retransmit=9 bytes_invalid=0 send_seq=18011 receive_seq=18011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=54.8 pwm=0.680 rpi: temp=52.1 mcu_temp: temp=38.6 sd_pos=71563 sysload=1.28 cputime=52.300 memavail=1642832 print_time=1002.981 buffer_time=2.059 print_stall=10 extruder: target=215 temp=215.2 pwm=0.408
Stats 992.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=540550 bytes_read=369271 bytes_retransmit=9 bytes_invalid=0 send_seq=18042 receive_seq=18042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=71786 sysload=1.26 cputime=52.368 memavail=1642580 print_time=1004.084 buffer_time=2.162 print_stall=10 extruder: target=215 temp=215.1 pwm=0.535
Stats 993.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000029 mcu_task_stddev=0.000067 bytes_write=541395 bytes_read=369697 bytes_retransmit=9 bytes_invalid=0 send_seq=18064 receive_seq=18064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=54.9 pwm=0.474 rpi: temp=52.6 mcu_temp: temp=38.5 sd_pos=71946 sysload=1.26 cputime=52.425 memavail=1642840 print_time=1005.093 buffer_time=2.170 print_stall=10 extruder: target=215 temp=215.0 pwm=0.590
Stats 994.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000029 mcu_task_stddev=0.000067 bytes_write=542327 bytes_read=370104 bytes_retransmit=9 bytes_invalid=0 send_seq=18088 receive_seq=18088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=54.8 pwm=0.304 rpi: temp=51.6 mcu_temp: temp=38.5 sd_pos=72095 sysload=1.26 cputime=52.492 memavail=1642544 print_time=1006.283 buffer_time=2.360 print_stall=10 extruder: target=215 temp=215.1 pwm=0.562
Stats 995.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000029 mcu_task_stddev=0.000067 bytes_write=542966 bytes_read=370521 bytes_retransmit=9 bytes_invalid=0 send_seq=18108 receive_seq=18108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=54.9 pwm=0.203 rpi: temp=51.6 mcu_temp: temp=38.6 sd_pos=72189 sysload=1.26 cputime=52.553 memavail=1642344 print_time=1006.931 buffer_time=2.007 print_stall=10 extruder: target=215 temp=215.1 pwm=0.527
Stats 996.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000029 mcu_task_stddev=0.000067 bytes_write=543832 bytes_read=370942 bytes_retransmit=9 bytes_invalid=0 send_seq=18132 receive_seq=18132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996454 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=52.1 mcu_temp: temp=38.5 sd_pos=72313 sysload=1.26 cputime=52.616 memavail=1642596 print_time=1008.314 buffer_time=2.389 print_stall=10 extruder: target=215 temp=214.9 pwm=0.530
Stats 997.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000029 mcu_task_stddev=0.000067 bytes_write=544559 bytes_read=371334 bytes_retransmit=9 bytes_invalid=0 send_seq=18153 receive_seq=18153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=54.9 pwm=0.666 rpi: temp=52.6 mcu_temp: temp=38.6 sd_pos=72406 sysload=1.24 cputime=52.676 memavail=1642528 print_time=1009.042 buffer_time=2.116 print_stall=10 extruder: target=215 temp=214.8 pwm=0.591
Stats 998.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=545540 bytes_read=371801 bytes_retransmit=9 bytes_invalid=0 send_seq=18180 receive_seq=18180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=38.4 sd_pos=72532 sysload=1.24 cputime=52.742 memavail=1642544 print_time=1010.551 buffer_time=2.624 print_stall=10 extruder: target=215 temp=214.9 pwm=0.518
Stats 999.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=546223 bytes_read=372217 bytes_retransmit=9 bytes_invalid=0 send_seq=18203 receive_seq=18203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=54.9 pwm=0.472 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=72623 sysload=1.24 cputime=52.805 memavail=1642232 print_time=1011.328 buffer_time=2.400 print_stall=10 extruder: target=215 temp=214.8 pwm=0.535
Stats 1000.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=546915 bytes_read=372614 bytes_retransmit=9 bytes_invalid=0 send_seq=18225 receive_seq=18225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=51.6 mcu_temp: temp=38.6 sd_pos=72682 sysload=1.24 cputime=52.867 memavail=1642484 print_time=1012.116 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.9 pwm=0.491
Stats 1001.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=547882 bytes_read=373056 bytes_retransmit=9 bytes_invalid=0 send_seq=18250 receive_seq=18250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=38.9 sd_pos=72837 sysload=1.24 cputime=52.933 memavail=1642428 print_time=1013.715 buffer_time=2.785 print_stall=10 extruder: target=215 temp=214.9 pwm=0.491
Stats 1002.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=548519 bytes_read=373462 bytes_retransmit=9 bytes_invalid=0 send_seq=18271 receive_seq=18271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=52.1 mcu_temp: temp=39.0 sd_pos=72900 sysload=1.30 cputime=52.993 memavail=1642056 print_time=1014.523 buffer_time=2.593 print_stall=10 extruder: target=215 temp=214.9 pwm=0.502
Stats 1003.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=549145 bytes_read=373869 bytes_retransmit=9 bytes_invalid=0 send_seq=18292 receive_seq=18292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=52.1 mcu_temp: temp=38.5 sd_pos=72961 sysload=1.30 cputime=53.054 memavail=1642116 print_time=1015.331 buffer_time=2.401 print_stall=10 extruder: target=215 temp=214.9 pwm=0.447
Stats 1004.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=549846 bytes_read=374289 bytes_retransmit=9 bytes_invalid=0 send_seq=18315 receive_seq=18315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=54.9 pwm=0.407 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=73056 sysload=1.30 cputime=53.102 memavail=1642376 print_time=1016.140 buffer_time=2.209 print_stall=10 extruder: target=215 temp=214.9 pwm=0.468
Stats 1005.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=550526 bytes_read=374699 bytes_retransmit=9 bytes_invalid=0 send_seq=18339 receive_seq=18339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=54.9 pwm=0.577 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=73118 sysload=1.30 cputime=53.162 memavail=1642384 print_time=1016.949 buffer_time=2.018 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
Stats 1006.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=551525 bytes_read=375111 bytes_retransmit=9 bytes_invalid=0 send_seq=18366 receive_seq=18366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=39.0 sd_pos=73244 sysload=1.30 cputime=53.222 memavail=1642316 print_time=1018.544 buffer_time=2.612 print_stall=10 extruder: target=215 temp=215.1 pwm=0.425
Stats 1007.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=552209 bytes_read=375540 bytes_retransmit=9 bytes_invalid=0 send_seq=18390 receive_seq=18390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=54.8 pwm=0.990 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=73338 sysload=1.27 cputime=53.283 memavail=1642064 print_time=1019.336 buffer_time=2.403 print_stall=10 extruder: target=215 temp=215.1 pwm=0.414
Stats 1008.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=552874 bytes_read=375961 bytes_retransmit=9 bytes_invalid=0 send_seq=18411 receive_seq=18411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.017 rpi: temp=52.1 mcu_temp: temp=38.3 sd_pos=73400 sysload=1.27 cputime=53.327 memavail=1642124 print_time=1020.102 buffer_time=2.168 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 1009.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=553783 bytes_read=376368 bytes_retransmit=9 bytes_invalid=0 send_seq=18435 receive_seq=18435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.9 pwm=0.467 rpi: temp=52.6 mcu_temp: temp=38.6 sd_pos=73557 sysload=1.27 cputime=53.384 memavail=1642136 print_time=1021.608 buffer_time=2.673 print_stall=10 extruder: target=215 temp=215.1 pwm=0.482
Stats 1010.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=554417 bytes_read=376790 bytes_retransmit=9 bytes_invalid=0 send_seq=18456 receive_seq=18456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=54.9 pwm=0.672 rpi: temp=51.1 mcu_temp: temp=38.8 sd_pos=73619 sysload=1.27 cputime=53.438 memavail=1642388 print_time=1022.320 buffer_time=2.385 print_stall=10 extruder: target=215 temp=215.2 pwm=0.474
Stats 1011.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=555074 bytes_read=377196 bytes_retransmit=9 bytes_invalid=0 send_seq=18477 receive_seq=18477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=38.7 sd_pos=73711 sysload=1.27 cputime=53.498 memavail=1642388 print_time=1023.015 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.2 pwm=0.407
Stats 1012.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=556005 bytes_read=377613 bytes_retransmit=9 bytes_invalid=0 send_seq=18503 receive_seq=18503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=73837 sysload=1.33 cputime=53.546 memavail=1642952 print_time=1024.323 buffer_time=2.387 print_stall=10 extruder: target=215 temp=215.1 pwm=0.557
Stats 1013.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=556667 bytes_read=378060 bytes_retransmit=9 bytes_invalid=0 send_seq=18526 receive_seq=18526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.0 pwm=0.428 rpi: temp=52.1 mcu_temp: temp=38.9 sd_pos=73926 sysload=1.33 cputime=53.607 memavail=1642948 print_time=1024.941 buffer_time=2.004 print_stall=10 extruder: target=215 temp=215.1 pwm=0.564
Stats 1014.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=557505 bytes_read=378476 bytes_retransmit=9 bytes_invalid=0 send_seq=18549 receive_seq=18549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=54.9 pwm=0.629 rpi: temp=51.1 mcu_temp: temp=39.2 sd_pos=74080 sysload=1.33 cputime=53.672 memavail=1642384 print_time=1026.016 buffer_time=2.079 print_stall=10 extruder: target=215 temp=215.1 pwm=0.564
Stats 1015.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=558954 bytes_read=378923 bytes_retransmit=9 bytes_invalid=0 send_seq=18581 receive_seq=18581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=74691 sysload=1.33 cputime=53.736 memavail=1642704 print_time=1027.352 buffer_time=2.414 print_stall=10 extruder: target=215 temp=215.2 pwm=0.430
Stats 1016.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=559755 bytes_read=379350 bytes_retransmit=9 bytes_invalid=0 send_seq=18603 receive_seq=18603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=51.6 mcu_temp: temp=38.7 sd_pos=75127 sysload=1.33 cputime=53.799 memavail=1642208 print_time=1028.217 buffer_time=2.278 print_stall=10 extruder: target=215 temp=215.1 pwm=0.545
Stats 1017.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=560526 bytes_read=379746 bytes_retransmit=9 bytes_invalid=0 send_seq=18622 receive_seq=18622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=52.6 mcu_temp: temp=38.4 sd_pos=75626 sysload=1.23 cputime=53.866 memavail=1642212 print_time=1029.081 buffer_time=2.142 print_stall=10 extruder: target=215 temp=214.9 pwm=0.603
Stats 1018.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=561532 bytes_read=380168 bytes_retransmit=9 bytes_invalid=0 send_seq=18646 receive_seq=18646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=76114 sysload=1.23 cputime=53.930 memavail=1642268 print_time=1029.992 buffer_time=2.052 print_stall=10 extruder: target=215 temp=215.1 pwm=0.474
Stats 1019.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=562351 bytes_read=380590 bytes_retransmit=9 bytes_invalid=0 send_seq=18667 receive_seq=18667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=54.9 pwm=0.512 rpi: temp=51.6 mcu_temp: temp=38.5 sd_pos=76729 sysload=1.23 cputime=53.998 memavail=1641764 print_time=1031.203 buffer_time=2.263 print_stall=10 extruder: target=215 temp=215.0 pwm=0.542
Stats 1020.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=563161 bytes_read=380996 bytes_retransmit=9 bytes_invalid=0 send_seq=18688 receive_seq=18688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.9 pwm=0.388 rpi: temp=51.1 mcu_temp: temp=38.7 sd_pos=77195 sysload=1.23 cputime=54.066 memavail=1641776 print_time=1032.111 buffer_time=2.170 print_stall=10 extruder: target=215 temp=214.9 pwm=0.641
Stats 1021.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=565236 bytes_read=381498 bytes_retransmit=9 bytes_invalid=0 send_seq=18731 receive_seq=18731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.9 pwm=0.605 rpi: temp=51.1 mcu_temp: temp=39.1 sd_pos=78206 sysload=1.23 cputime=54.140 memavail=1641724 print_time=1033.105 buffer_time=2.163 print_stall=10 extruder: target=215 temp=214.9 pwm=0.649
Stats 1022.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=568273 bytes_read=382110 bytes_retransmit=9 bytes_invalid=0 send_seq=18790 receive_seq=18790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=79124 sysload=1.21 cputime=54.218 memavail=1641976 print_time=1034.186 buffer_time=2.244 print_stall=10 extruder: target=215 temp=215.1 pwm=0.492
Stats 1023.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=569154 bytes_read=382541 bytes_retransmit=9 bytes_invalid=0 send_seq=18813 receive_seq=18813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=50.6 mcu_temp: temp=38.8 sd_pos=79276 sysload=1.21 cputime=54.281 memavail=1642096 print_time=1035.109 buffer_time=2.167 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 1024.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=570021 bytes_read=382954 bytes_retransmit=9 bytes_invalid=0 send_seq=18836 receive_seq=18836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=79428 sysload=1.21 cputime=54.340 memavail=1642348 print_time=1036.209 buffer_time=2.265 print_stall=10 extruder: target=215 temp=215.0 pwm=0.536
Stats 1025.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=570932 bytes_read=383386 bytes_retransmit=9 bytes_invalid=0 send_seq=18859 receive_seq=18859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=79553 sysload=1.21 cputime=54.405 memavail=1642096 print_time=1037.490 buffer_time=2.546 print_stall=10 extruder: target=215 temp=214.8 pwm=0.611
Stats 1026.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=571527 bytes_read=383777 bytes_retransmit=9 bytes_invalid=0 send_seq=18877 receive_seq=18877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.1 pwm=0.101 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=79645 sysload=1.21 cputime=54.464 memavail=1642108 print_time=1038.188 buffer_time=2.244 print_stall=10 extruder: target=215 temp=214.7 pwm=0.590
Stats 1027.9: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=572546 bytes_read=384199 bytes_retransmit=9 bytes_invalid=0 send_seq=18904 receive_seq=18904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=51.6 mcu_temp: temp=39.1 sd_pos=79771 sysload=1.11 cputime=54.529 memavail=1642360 print_time=1039.639 buffer_time=2.695 print_stall=10 extruder: target=215 temp=214.9 pwm=0.475
Stats 1028.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=573189 bytes_read=384636 bytes_retransmit=9 bytes_invalid=0 send_seq=18925 receive_seq=18925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.9 pwm=0.467 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=79833 sysload=1.11 cputime=54.590 memavail=1642360 print_time=1040.404 buffer_time=2.459 print_stall=10 extruder: target=215 temp=214.7 pwm=0.608
Stats 1029.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=573847 bytes_read=385037 bytes_retransmit=9 bytes_invalid=0 send_seq=18945 receive_seq=18945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=51.1 mcu_temp: temp=38.6 sd_pos=79893 sysload=1.11 cputime=54.648 memavail=1642360 print_time=1041.183 buffer_time=2.237 print_stall=10 extruder: target=215 temp=214.7 pwm=0.508
Stats 1030.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=574479 bytes_read=385424 bytes_retransmit=9 bytes_invalid=0 send_seq=18965 receive_seq=18965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.1 pwm=0.149 rpi: temp=52.1 mcu_temp: temp=39.0 sd_pos=79957 sysload=1.11 cputime=54.704 memavail=1642108 print_time=1041.977 buffer_time=2.031 print_stall=10 extruder: target=215 temp=214.7 pwm=0.556
Stats 1031.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=575488 bytes_read=385876 bytes_retransmit=9 bytes_invalid=0 send_seq=18992 receive_seq=18992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=54.9 pwm=0.635 rpi: temp=52.1 mcu_temp: temp=38.4 sd_pos=80111 sysload=1.11 cputime=54.770 memavail=1642352 print_time=1043.603 buffer_time=2.657 print_stall=10 extruder: target=215 temp=214.8 pwm=0.544
Stats 1032.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=576077 bytes_read=386267 bytes_retransmit=9 bytes_invalid=0 send_seq=19010 receive_seq=19010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=54.9 pwm=0.630 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=80172 sysload=1.18 cputime=54.815 memavail=1642696 print_time=1044.427 buffer_time=2.481 print_stall=10 extruder: target=215 temp=214.8 pwm=0.487
Stats 1033.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=576750 bytes_read=386674 bytes_retransmit=9 bytes_invalid=0 send_seq=19031 receive_seq=19031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=53.1 mcu_temp: temp=39.0 sd_pos=80265 sysload=1.18 cputime=54.878 memavail=1642688 print_time=1045.272 buffer_time=2.325 print_stall=10 extruder: target=215 temp=214.7 pwm=0.553
Stats 1034.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=577393 bytes_read=387096 bytes_retransmit=9 bytes_invalid=0 send_seq=19052 receive_seq=19052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=51.6 mcu_temp: temp=38.7 sd_pos=80325 sysload=1.18 cputime=54.937 memavail=1642696 print_time=1046.093 buffer_time=2.146 print_stall=10 extruder: target=215 temp=215.0 pwm=0.447
Stats 1035.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=578330 bytes_read=387527 bytes_retransmit=9 bytes_invalid=0 send_seq=19078 receive_seq=19078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=52.1 mcu_temp: temp=39.0 sd_pos=80482 sysload=1.18 cputime=55.001 memavail=1642688 print_time=1047.761 buffer_time=2.813 print_stall=10 extruder: target=215 temp=214.8 pwm=0.571
Stats 1036.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=578982 bytes_read=387914 bytes_retransmit=9 bytes_invalid=0 send_seq=19098 receive_seq=19098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=52.1 mcu_temp: temp=39.2 sd_pos=80546 sysload=1.18 cputime=55.058 memavail=1642444 print_time=1048.593 buffer_time=2.645 print_stall=10 extruder: target=215 temp=215.0 pwm=0.453
Stats 1037.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=579670 bytes_read=388341 bytes_retransmit=9 bytes_invalid=0 send_seq=19120 receive_seq=19120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.9 pwm=0.693 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=80608 sysload=1.09 cputime=55.120 memavail=1642444 print_time=1049.418 buffer_time=2.469 print_stall=10 extruder: target=215 temp=215.0 pwm=0.492
Stats 1038.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=580358 bytes_read=388767 bytes_retransmit=9 bytes_invalid=0 send_seq=19142 receive_seq=19142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=52.6 mcu_temp: temp=38.6 sd_pos=80670 sysload=1.09 cputime=55.181 memavail=1642384 print_time=1050.235 buffer_time=2.286 print_stall=10 extruder: target=215 temp=214.9 pwm=0.547
Stats 1039.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=580927 bytes_read=389139 bytes_retransmit=9 bytes_invalid=0 send_seq=19159 receive_seq=19159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=80732 sysload=1.09 cputime=55.240 memavail=1642140 print_time=1051.046 buffer_time=2.096 print_stall=10 extruder: target=215 temp=215.2 pwm=0.434
Stats 1040.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=581809 bytes_read=389566 bytes_retransmit=9 bytes_invalid=0 send_seq=19181 receive_seq=19181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=80857 sysload=1.09 cputime=55.302 memavail=1642392 print_time=1052.621 buffer_time=2.671 print_stall=10 extruder: target=215 temp=215.2 pwm=0.434
Stats 1041.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=582435 bytes_read=389952 bytes_retransmit=9 bytes_invalid=0 send_seq=19198 receive_seq=19198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=52.1 mcu_temp: temp=39.4 sd_pos=80949 sysload=1.09 cputime=55.344 memavail=1642332 print_time=1053.392 buffer_time=2.440 print_stall=10 extruder: target=215 temp=215.2 pwm=0.438
Stats 1042.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=583096 bytes_read=390344 bytes_retransmit=9 bytes_invalid=0 send_seq=19219 receive_seq=19219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=51.6 mcu_temp: temp=38.9 sd_pos=81009 sysload=1.08 cputime=55.405 memavail=1642108 print_time=1054.128 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.4 pwm=0.311
Stats 1043.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=584031 bytes_read=390801 bytes_retransmit=9 bytes_invalid=0 send_seq=19244 receive_seq=19244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=52.1 mcu_temp: temp=39.4 sd_pos=81134 sysload=1.08 cputime=55.469 memavail=1642116 print_time=1055.540 buffer_time=2.588 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 1044.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=584604 bytes_read=391197 bytes_retransmit=9 bytes_invalid=0 send_seq=19263 receive_seq=19263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=81198 sysload=1.08 cputime=55.528 memavail=1641864 print_time=1056.200 buffer_time=2.247 print_stall=10 extruder: target=215 temp=215.2 pwm=0.515
Stats 1045.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=585454 bytes_read=391599 bytes_retransmit=9 bytes_invalid=0 send_seq=19286 receive_seq=19286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=52.1 mcu_temp: temp=38.8 sd_pos=81353 sysload=1.08 cputime=55.591 memavail=1642120 print_time=1057.409 buffer_time=2.455 print_stall=10 extruder: target=215 temp=215.2 pwm=0.505
Stats 1046.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=586118 bytes_read=392011 bytes_retransmit=9 bytes_invalid=0 send_seq=19305 receive_seq=19305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=52.6 mcu_temp: temp=38.9 sd_pos=81480 sysload=1.08 cputime=55.650 memavail=1642120 print_time=1057.973 buffer_time=2.017 print_stall=10 extruder: target=215 temp=215.0 pwm=0.584
Stats 1047.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=587614 bytes_read=392477 bytes_retransmit=9 bytes_invalid=0 send_seq=19338 receive_seq=19338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=54.9 pwm=0.583 rpi: temp=52.1 mcu_temp: temp=39.4 sd_pos=82072 sysload=0.99 cputime=55.716 memavail=1642056 print_time=1059.497 buffer_time=2.541 print_stall=10 extruder: target=215 temp=215.1 pwm=0.501
Stats 1048.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=588409 bytes_read=392889 bytes_retransmit=9 bytes_invalid=0 send_seq=19360 receive_seq=19360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=38.9 sd_pos=82386 sysload=0.99 cputime=55.779 memavail=1641864 print_time=1060.035 buffer_time=2.080 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 1049.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=589367 bytes_read=393326 bytes_retransmit=9 bytes_invalid=0 send_seq=19384 receive_seq=19384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.1 pwm=0.028 rpi: temp=52.6 mcu_temp: temp=39.0 sd_pos=82972 sysload=0.99 cputime=55.851 memavail=1642372 print_time=1061.273 buffer_time=2.316 print_stall=10 extruder: target=215 temp=215.0 pwm=0.444
Stats 1050.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=590132 bytes_read=393727 bytes_retransmit=9 bytes_invalid=0 send_seq=19404 receive_seq=19404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=39.1 sd_pos=83436 sysload=0.99 cputime=55.918 memavail=1641868 print_time=1062.040 buffer_time=2.083 print_stall=10 extruder: target=215 temp=214.9 pwm=0.552
Stats 1051.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=591155 bytes_read=394144 bytes_retransmit=9 bytes_invalid=0 send_seq=19430 receive_seq=19430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=51.6 mcu_temp: temp=38.7 sd_pos=83912 sysload=0.99 cputime=55.985 memavail=1642036 print_time=1063.006 buffer_time=2.049 print_stall=10 extruder: target=215 temp=215.1 pwm=0.455
Stats 1052.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=592034 bytes_read=394571 bytes_retransmit=9 bytes_invalid=0 send_seq=19452 receive_seq=19452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=52.1 mcu_temp: temp=38.9 sd_pos=84534 sysload=0.91 cputime=56.059 memavail=1642000 print_time=1064.173 buffer_time=2.215 print_stall=10 extruder: target=215 temp=215.0 pwm=0.490
Stats 1053.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=593541 bytes_read=395057 bytes_retransmit=9 bytes_invalid=0 send_seq=19486 receive_seq=19486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=85210 sysload=0.91 cputime=56.132 memavail=1641804 print_time=1065.179 buffer_time=2.220 print_stall=10 extruder: target=215 temp=214.9 pwm=0.612
Stats 1054.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=596338 bytes_read=395619 bytes_retransmit=9 bytes_invalid=0 send_seq=19541 receive_seq=19541 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.165 rpi: temp=52.1 mcu_temp: temp=38.6 sd_pos=86306 sysload=0.91 cputime=56.210 memavail=1641744 print_time=1065.991 buffer_time=2.031 print_stall=10 extruder: target=215 temp=215.0 pwm=0.526
Stats 1056.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=598352 bytes_read=396141 bytes_retransmit=9 bytes_invalid=0 send_seq=19582 receive_seq=19582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=51.6 mcu_temp: temp=38.9 sd_pos=86739 sysload=0.91 cputime=56.283 memavail=1641676 print_time=1067.342 buffer_time=2.381 print_stall=10 extruder: target=215 temp=215.1 pwm=0.437
Stats 1057.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=599230 bytes_read=396552 bytes_retransmit=9 bytes_invalid=0 send_seq=19604 receive_seq=19604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=54.9 pwm=0.592 rpi: temp=50.6 mcu_temp: temp=39.1 sd_pos=86893 sysload=0.91 cputime=56.348 memavail=1641692 print_time=1068.399 buffer_time=2.438 print_stall=10 extruder: target=215 temp=215.1 pwm=0.445
Stats 1058.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=599842 bytes_read=396934 bytes_retransmit=9 bytes_invalid=0 send_seq=19623 receive_seq=19623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=51.6 mcu_temp: temp=39.1 sd_pos=86985 sysload=0.84 cputime=56.409 memavail=1641384 print_time=1069.001 buffer_time=2.039 print_stall=10 extruder: target=215 temp=215.0 pwm=0.519
Stats 1059.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=600720 bytes_read=397386 bytes_retransmit=9 bytes_invalid=0 send_seq=19647 receive_seq=19647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=52.6 mcu_temp: temp=39.0 sd_pos=87141 sysload=0.84 cputime=56.460 memavail=1641132 print_time=1070.331 buffer_time=2.368 print_stall=10 extruder: target=215 temp=214.7 pwm=0.687
Stats 1060.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=601365 bytes_read=397792 bytes_retransmit=9 bytes_invalid=0 send_seq=19668 receive_seq=19668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=87233 sysload=0.84 cputime=56.522 memavail=1641384 print_time=1071.038 buffer_time=2.075 print_stall=10 extruder: target=215 temp=214.6 pwm=0.707
Stats 1061.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=602281 bytes_read=398199 bytes_retransmit=9 bytes_invalid=0 send_seq=19692 receive_seq=19692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=87356 sysload=0.84 cputime=56.589 memavail=1641384 print_time=1072.528 buffer_time=2.563 print_stall=10 extruder: target=215 temp=214.7 pwm=0.526
Stats 1062.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=602900 bytes_read=398611 bytes_retransmit=9 bytes_invalid=0 send_seq=19711 receive_seq=19711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=53.1 mcu_temp: temp=38.9 sd_pos=87451 sysload=0.84 cputime=56.653 memavail=1641888 print_time=1073.317 buffer_time=2.352 print_stall=10 extruder: target=215 temp=214.8 pwm=0.471
Stats 1063.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000057 bytes_write=603562 bytes_read=399017 bytes_retransmit=9 bytes_invalid=0 send_seq=19732 receive_seq=19732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=87513 sysload=0.77 cputime=56.716 memavail=1641392 print_time=1074.111 buffer_time=2.145 print_stall=10 extruder: target=215 temp=214.6 pwm=0.653
Stats 1064.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=604476 bytes_read=399436 bytes_retransmit=9 bytes_invalid=0 send_seq=19756 receive_seq=19756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=52.1 mcu_temp: temp=38.6 sd_pos=87669 sysload=0.77 cputime=56.779 memavail=1640820 print_time=1075.768 buffer_time=2.801 print_stall=10 extruder: target=215 temp=214.7 pwm=0.503
Stats 1065.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=605152 bytes_read=399849 bytes_retransmit=9 bytes_invalid=0 send_seq=19775 receive_seq=19775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=11 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.407 rpi: temp=52.1 mcu_temp: temp=39.0 sd_pos=87733 sysload=0.77 cputime=56.842 memavail=1641100 print_time=1076.596 buffer_time=2.629 print_stall=10 extruder: target=215 temp=214.7 pwm=0.566
Stats 1066.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=605774 bytes_read=400216 bytes_retransmit=9 bytes_invalid=0 send_seq=19793 receive_seq=19793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.0 pwm=0.111 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=87794 sysload=0.77 cputime=56.901 memavail=1641368 print_time=1077.443 buffer_time=2.475 print_stall=10 extruder: target=215 temp=214.8 pwm=0.483
Stats 1067.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=606471 bytes_read=400603 bytes_retransmit=9 bytes_invalid=0 send_seq=19815 receive_seq=19815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=51.6 mcu_temp: temp=39.0 sd_pos=87886 sysload=0.77 cputime=56.966 memavail=1641352 print_time=1078.297 buffer_time=2.329 print_stall=10 extruder: target=215 temp=214.9 pwm=0.499
Stats 1068.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=607094 bytes_read=401025 bytes_retransmit=9 bytes_invalid=0 send_seq=19834 receive_seq=19834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.382 rpi: temp=52.6 mcu_temp: temp=39.1 sd_pos=87947 sysload=0.71 cputime=57.028 memavail=1641352 print_time=1079.157 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.9 pwm=0.507
Stats 1069.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=607729 bytes_read=401432 bytes_retransmit=9 bytes_invalid=0 send_seq=19855 receive_seq=19855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=39.1 sd_pos=88011 sysload=0.71 cputime=57.090 memavail=1641100 print_time=1080.016 buffer_time=2.046 print_stall=10 extruder: target=215 temp=215.1 pwm=0.426
Stats 1070.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=608677 bytes_read=401844 bytes_retransmit=9 bytes_invalid=0 send_seq=19880 receive_seq=19880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=53.1 mcu_temp: temp=39.1 sd_pos=88165 sysload=0.71 cputime=57.155 memavail=1640844 print_time=1081.742 buffer_time=2.772 print_stall=10 extruder: target=215 temp=215.2 pwm=0.426
Stats 1071.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=609332 bytes_read=402285 bytes_retransmit=9 bytes_invalid=0 send_seq=19902 receive_seq=19902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.1 pwm=0.108 rpi: temp=52.6 mcu_temp: temp=39.0 sd_pos=88225 sysload=0.71 cputime=57.219 memavail=1641100 print_time=1082.588 buffer_time=2.617 print_stall=10 extruder: target=215 temp=215.1 pwm=0.488
Stats 1072.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=609969 bytes_read=402667 bytes_retransmit=9 bytes_invalid=0 send_seq=19921 receive_seq=19921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=51.6 mcu_temp: temp=39.0 sd_pos=88289 sysload=0.71 cputime=57.279 memavail=1641104 print_time=1083.434 buffer_time=2.462 print_stall=10 extruder: target=215 temp=215.1 pwm=0.516
Stats 1073.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=610651 bytes_read=403059 bytes_retransmit=9 bytes_invalid=0 send_seq=19942 receive_seq=19942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.190 rpi: temp=52.6 mcu_temp: temp=38.8 sd_pos=88382 sysload=0.65 cputime=57.324 memavail=1641920 print_time=1084.290 buffer_time=2.318 print_stall=10 extruder: target=215 temp=214.9 pwm=0.658
Stats 1074.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=611310 bytes_read=403510 bytes_retransmit=9 bytes_invalid=0 send_seq=19963 receive_seq=19963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=55.0 pwm=0.234 rpi: temp=52.6 mcu_temp: temp=38.9 sd_pos=88446 sysload=0.65 cputime=57.387 memavail=1642036 print_time=1085.101 buffer_time=2.127 print_stall=10 extruder: target=215 temp=215.1 pwm=0.502
Stats 1075.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=612281 bytes_read=403922 bytes_retransmit=9 bytes_invalid=0 send_seq=19988 receive_seq=19988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=52.1 mcu_temp: temp=39.2 sd_pos=88599 sysload=0.65 cputime=57.450 memavail=1642036 print_time=1086.711 buffer_time=2.737 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 1076.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=612891 bytes_read=404299 bytes_retransmit=9 bytes_invalid=0 send_seq=20006 receive_seq=20006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=55.1 pwm=0.027 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=88660 sysload=0.65 cputime=57.509 memavail=1642044 print_time=1087.491 buffer_time=2.516 print_stall=10 extruder: target=215 temp=215.1 pwm=0.448
Stats 1077.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=613537 bytes_read=404735 bytes_retransmit=9 bytes_invalid=0 send_seq=20027 receive_seq=20027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.1 pwm=0.053 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=88724 sysload=0.65 cputime=57.573 memavail=1641784 print_time=1088.248 buffer_time=2.272 print_stall=10 extruder: target=215 temp=215.1 pwm=0.546
Stats 1078.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=614125 bytes_read=405122 bytes_retransmit=9 bytes_invalid=0 send_seq=20047 receive_seq=20047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=88815 sysload=0.60 cputime=57.635 memavail=1641768 print_time=1088.981 buffer_time=2.004 print_stall=10 extruder: target=215 temp=215.0 pwm=0.590
Stats 1079.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=615037 bytes_read=405554 bytes_retransmit=9 bytes_invalid=0 send_seq=20070 receive_seq=20070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996440 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=53.1 mcu_temp: temp=39.1 sd_pos=88940 sysload=0.60 cputime=57.700 memavail=1641540 print_time=1090.357 buffer_time=2.380 print_stall=10 extruder: target=215 temp=215.2 pwm=0.469
Stats 1080.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=615689 bytes_read=405975 bytes_retransmit=9 bytes_invalid=0 send_seq=20091 receive_seq=20091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=52.1 mcu_temp: temp=39.2 sd_pos=89033 sysload=0.60 cputime=57.763 memavail=1641788 print_time=1091.009 buffer_time=2.031 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 1081.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=616529 bytes_read=406377 bytes_retransmit=9 bytes_invalid=0 send_seq=20114 receive_seq=20114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=89187 sysload=0.60 cputime=57.828 memavail=1641804 print_time=1092.157 buffer_time=2.178 print_stall=10 extruder: target=215 temp=215.0 pwm=0.522
Stats 1082.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=617339 bytes_read=406789 bytes_retransmit=9 bytes_invalid=0 send_seq=20136 receive_seq=20136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=89345 sysload=0.60 cputime=57.889 memavail=1641544 print_time=1093.060 buffer_time=2.081 print_stall=10 extruder: target=215 temp=215.0 pwm=0.499
Stats 1083.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=618834 bytes_read=407265 bytes_retransmit=9 bytes_invalid=0 send_seq=20168 receive_seq=20168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=39.2 sd_pos=90095 sysload=0.55 cputime=57.963 memavail=1641360 print_time=1094.260 buffer_time=2.279 print_stall=10 extruder: target=215 temp=215.1 pwm=0.445
Stats 1084.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=619581 bytes_read=407672 bytes_retransmit=9 bytes_invalid=0 send_seq=20189 receive_seq=20189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=51.6 mcu_temp: temp=39.3 sd_pos=90523 sysload=0.55 cputime=58.031 memavail=1641804 print_time=1095.178 buffer_time=2.197 print_stall=10 extruder: target=215 temp=215.0 pwm=0.532
Stats 1085.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=620231 bytes_read=408059 bytes_retransmit=9 bytes_invalid=0 send_seq=20206 receive_seq=20206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=54.9 pwm=0.594 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=90931 sysload=0.55 cputime=58.096 memavail=1641824 print_time=1096.019 buffer_time=2.038 print_stall=10 extruder: target=215 temp=215.0 pwm=0.532
Stats 1086.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=621336 bytes_read=408495 bytes_retransmit=9 bytes_invalid=0 send_seq=20230 receive_seq=20230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=91503 sysload=0.55 cputime=58.166 memavail=1642068 print_time=1097.030 buffer_time=2.048 print_stall=10 extruder: target=215 temp=214.9 pwm=0.497
Stats 1087.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=622152 bytes_read=408908 bytes_retransmit=9 bytes_invalid=0 send_seq=20253 receive_seq=20253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=54.9 pwm=0.576 rpi: temp=53.1 mcu_temp: temp=39.4 sd_pos=92024 sysload=0.55 cputime=58.235 memavail=1642328 print_time=1098.199 buffer_time=2.216 print_stall=10 extruder: target=215 temp=215.1 pwm=0.447
Stats 1088.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=622942 bytes_read=409320 bytes_retransmit=9 bytes_invalid=0 send_seq=20275 receive_seq=20275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=52.1 mcu_temp: temp=39.5 sd_pos=92567 sysload=0.51 cputime=58.306 memavail=1642132 print_time=1099.192 buffer_time=2.210 print_stall=10 extruder: target=215 temp=215.0 pwm=0.498
Stats 1089.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=625400 bytes_read=409896 bytes_retransmit=9 bytes_invalid=0 send_seq=20324 receive_seq=20324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=93611 sysload=0.51 cputime=58.386 memavail=1642392 print_time=1100.070 buffer_time=2.087 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 1090.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=627719 bytes_read=410413 bytes_retransmit=9 bytes_invalid=0 send_seq=20370 receive_seq=20370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=52.1 mcu_temp: temp=39.0 sd_pos=94366 sysload=0.51 cputime=58.457 memavail=1642360 print_time=1101.011 buffer_time=2.027 print_stall=10 extruder: target=215 temp=215.0 pwm=0.509
Stats 1091.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=628891 bytes_read=410860 bytes_retransmit=9 bytes_invalid=0 send_seq=20399 receive_seq=20399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=51.6 mcu_temp: temp=38.8 sd_pos=94588 sysload=0.51 cputime=58.520 memavail=1642088 print_time=1102.514 buffer_time=2.530 print_stall=10 extruder: target=215 temp=215.0 pwm=0.538
Stats 1092.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=629533 bytes_read=411281 bytes_retransmit=9 bytes_invalid=0 send_seq=20420 receive_seq=20420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=53.6 mcu_temp: temp=39.3 sd_pos=94680 sysload=0.51 cputime=58.578 memavail=1642088 print_time=1103.119 buffer_time=2.135 print_stall=10 extruder: target=215 temp=215.1 pwm=0.410
Stats 1093.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=630427 bytes_read=411693 bytes_retransmit=9 bytes_invalid=0 send_seq=20445 receive_seq=20445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.0 pwm=0.425 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=94804 sysload=0.47 cputime=58.639 memavail=1641556 print_time=1104.455 buffer_time=2.470 print_stall=10 extruder: target=215 temp=214.8 pwm=0.613
Stats 1094.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=631087 bytes_read=412125 bytes_retransmit=9 bytes_invalid=0 send_seq=20468 receive_seq=20468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=55.0 pwm=0.460 rpi: temp=52.1 mcu_temp: temp=39.5 sd_pos=94900 sysload=0.47 cputime=58.699 memavail=1641580 print_time=1105.173 buffer_time=2.188 print_stall=10 extruder: target=215 temp=214.7 pwm=0.590
Stats 1095.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=632018 bytes_read=412571 bytes_retransmit=9 bytes_invalid=0 send_seq=20494 receive_seq=20494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=95026 sysload=0.47 cputime=58.765 memavail=1641884 print_time=1106.693 buffer_time=2.706 print_stall=10 extruder: target=215 temp=214.8 pwm=0.529
Stats 1096.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=632666 bytes_read=412958 bytes_retransmit=9 bytes_invalid=0 send_seq=20514 receive_seq=20514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.1 pwm=0.068 rpi: temp=52.1 mcu_temp: temp=39.5 sd_pos=95118 sysload=0.47 cputime=58.821 memavail=1641572 print_time=1107.489 buffer_time=2.502 print_stall=10 extruder: target=215 temp=214.6 pwm=0.591
Stats 1097.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=633316 bytes_read=413365 bytes_retransmit=9 bytes_invalid=0 send_seq=20535 receive_seq=20535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=53.6 mcu_temp: temp=39.2 sd_pos=95180 sysload=0.47 cputime=58.880 memavail=1641592 print_time=1108.305 buffer_time=2.317 print_stall=10 extruder: target=215 temp=214.6 pwm=0.610
Stats 1098.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=633952 bytes_read=413786 bytes_retransmit=9 bytes_invalid=0 send_seq=20556 receive_seq=20556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.0 pwm=0.190 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=95240 sysload=0.43 cputime=58.940 memavail=1641804 print_time=1109.136 buffer_time=2.148 print_stall=10 extruder: target=215 temp=214.6 pwm=0.586
Stats 1099.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=634854 bytes_read=414213 bytes_retransmit=9 bytes_invalid=0 send_seq=20581 receive_seq=20581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=51.1 mcu_temp: temp=39.2 sd_pos=95394 sysload=0.43 cputime=59.001 memavail=1641832 print_time=1110.843 buffer_time=2.854 print_stall=10 extruder: target=215 temp=214.8 pwm=0.408
Stats 1100.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=635508 bytes_read=414615 bytes_retransmit=9 bytes_invalid=0 send_seq=20601 receive_seq=20601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=52.1 mcu_temp: temp=39.4 sd_pos=95458 sysload=0.43 cputime=59.057 memavail=1641824 print_time=1111.711 buffer_time=2.721 print_stall=10 extruder: target=215 temp=214.8 pwm=0.507
Stats 1101.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=636131 bytes_read=415031 bytes_retransmit=9 bytes_invalid=0 send_seq=20621 receive_seq=20621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=95519 sysload=0.43 cputime=59.117 memavail=1641576 print_time=1112.586 buffer_time=2.596 print_stall=10 extruder: target=215 temp=215.0 pwm=0.433
Stats 1102.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=636766 bytes_read=415418 bytes_retransmit=9 bytes_invalid=0 send_seq=20641 receive_seq=20641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=95613 sysload=0.43 cputime=59.178 memavail=1641516 print_time=1113.481 buffer_time=2.491 print_stall=10 extruder: target=215 temp=214.9 pwm=0.544
Stats 1103.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=637381 bytes_read=415815 bytes_retransmit=9 bytes_invalid=0 send_seq=20660 receive_seq=20660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=54.9 pwm=0.598 rpi: temp=51.6 mcu_temp: temp=39.3 sd_pos=95674 sysload=0.39 cputime=59.239 memavail=1642008 print_time=1114.353 buffer_time=2.362 print_stall=10 extruder: target=215 temp=215.1 pwm=0.463
Stats 1104.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=637987 bytes_read=416241 bytes_retransmit=9 bytes_invalid=0 send_seq=20679 receive_seq=20679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=95737 sysload=0.39 cputime=59.301 memavail=1642260 print_time=1115.238 buffer_time=2.246 print_stall=10 extruder: target=215 temp=215.1 pwm=0.519
Stats 1105.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=638608 bytes_read=416623 bytes_retransmit=9 bytes_invalid=0 send_seq=20698 receive_seq=20698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=95828 sysload=0.39 cputime=59.358 memavail=1642260 print_time=1116.123 buffer_time=2.130 print_stall=10 extruder: target=215 temp=215.1 pwm=0.523
Stats 1106.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=639262 bytes_read=417030 bytes_retransmit=9 bytes_invalid=0 send_seq=20719 receive_seq=20719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.1 pwm=0.054 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=95892 sysload=0.39 cputime=59.419 memavail=1642008 print_time=1117.010 buffer_time=2.016 print_stall=10 extruder: target=215 temp=215.2 pwm=0.478
Stats 1107.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=640145 bytes_read=417456 bytes_retransmit=9 bytes_invalid=0 send_seq=20741 receive_seq=20741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=53.1 mcu_temp: temp=39.3 sd_pos=96016 sysload=0.39 cputime=59.482 memavail=1641748 print_time=1118.758 buffer_time=2.764 print_stall=10 extruder: target=215 temp=215.1 pwm=0.478
Stats 1108.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=640848 bytes_read=417843 bytes_retransmit=9 bytes_invalid=0 send_seq=20761 receive_seq=20761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=96109 sysload=0.36 cputime=59.539 memavail=1641756 print_time=1119.635 buffer_time=2.641 print_stall=10 extruder: target=215 temp=215.3 pwm=0.449
Stats 1109.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=641512 bytes_read=418265 bytes_retransmit=9 bytes_invalid=0 send_seq=20782 receive_seq=20782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.0 pwm=0.428 rpi: temp=51.1 mcu_temp: temp=39.8 sd_pos=96173 sysload=0.36 cputime=59.598 memavail=1641780 print_time=1120.471 buffer_time=2.477 print_stall=10 extruder: target=215 temp=215.1 pwm=0.568
Stats 1110.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=642212 bytes_read=418686 bytes_retransmit=9 bytes_invalid=0 send_seq=20803 receive_seq=20803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.9 pwm=0.601 rpi: temp=53.1 mcu_temp: temp=39.7 sd_pos=96234 sysload=0.36 cputime=59.656 memavail=1641732 print_time=1121.308 buffer_time=2.312 print_stall=10 extruder: target=215 temp=215.4 pwm=0.424
Stats 1111.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=642812 bytes_read=419063 bytes_retransmit=9 bytes_invalid=0 send_seq=20821 receive_seq=20821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=96328 sysload=0.36 cputime=59.708 memavail=1641520 print_time=1122.129 buffer_time=2.133 print_stall=10 extruder: target=215 temp=215.2 pwm=0.530
Stats 1112.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=643758 bytes_read=419490 bytes_retransmit=9 bytes_invalid=0 send_seq=20846 receive_seq=20846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=96453 sysload=0.36 cputime=59.765 memavail=1641512 print_time=1123.712 buffer_time=2.716 print_stall=10 extruder: target=215 temp=215.2 pwm=0.481
Stats 1113.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=644417 bytes_read=419901 bytes_retransmit=9 bytes_invalid=0 send_seq=20865 receive_seq=20865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.9 pwm=0.636 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=96546 sysload=0.33 cputime=59.813 memavail=1641520 print_time=1124.468 buffer_time=2.472 print_stall=10 extruder: target=215 temp=215.2 pwm=0.458
Stats 1114.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=645081 bytes_read=420308 bytes_retransmit=9 bytes_invalid=0 send_seq=20886 receive_seq=20886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=51.6 mcu_temp: temp=40.0 sd_pos=96608 sysload=0.33 cputime=59.872 memavail=1641280 print_time=1125.197 buffer_time=2.200 print_stall=10 extruder: target=215 temp=215.0 pwm=0.604
Stats 1115.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=646003 bytes_read=420735 bytes_retransmit=9 bytes_invalid=0 send_seq=20911 receive_seq=20911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=96760 sysload=0.33 cputime=59.933 memavail=1641536 print_time=1126.575 buffer_time=2.577 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 1116.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=646639 bytes_read=421151 bytes_retransmit=9 bytes_invalid=0 send_seq=20931 receive_seq=20931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=96821 sysload=0.33 cputime=59.990 memavail=1641536 print_time=1127.175 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.2 pwm=0.389
Stats 1117.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=647485 bytes_read=421558 bytes_retransmit=9 bytes_invalid=0 send_seq=20955 receive_seq=20955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.338 rpi: temp=52.6 mcu_temp: temp=39.2 sd_pos=96975 sysload=0.33 cputime=60.048 memavail=1642048 print_time=1128.266 buffer_time=2.267 print_stall=10 extruder: target=215 temp=215.1 pwm=0.512
Stats 1118.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=648298 bytes_read=421970 bytes_retransmit=9 bytes_invalid=0 send_seq=20977 receive_seq=20977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=52.6 mcu_temp: temp=39.8 sd_pos=97134 sysload=0.31 cputime=60.106 memavail=1641796 print_time=1129.118 buffer_time=2.118 print_stall=10 extruder: target=215 temp=215.2 pwm=0.450
Stats 1119.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=649860 bytes_read=422461 bytes_retransmit=9 bytes_invalid=0 send_seq=21009 receive_seq=21009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.1 pwm=0.070 rpi: temp=52.1 mcu_temp: temp=39.6 sd_pos=97628 sysload=0.31 cputime=60.172 memavail=1642048 print_time=1130.012 buffer_time=2.011 print_stall=10 extruder: target=215 temp=215.1 pwm=0.507
Stats 1120.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=650693 bytes_read=422868 bytes_retransmit=9 bytes_invalid=0 send_seq=21033 receive_seq=21033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=53.1 mcu_temp: temp=39.4 sd_pos=98099 sysload=0.31 cputime=60.220 memavail=1640540 print_time=1131.036 buffer_time=2.034 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 1121.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=651522 bytes_read=423280 bytes_retransmit=9 bytes_invalid=0 send_seq=21055 receive_seq=21055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.427 rpi: temp=53.1 mcu_temp: temp=39.4 sd_pos=98674 sysload=0.31 cputime=60.286 memavail=1640796 print_time=1132.217 buffer_time=2.214 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 1122.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=652530 bytes_read=423716 bytes_retransmit=9 bytes_invalid=0 send_seq=21079 receive_seq=21079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=99207 sysload=0.31 cputime=60.353 memavail=1641048 print_time=1133.219 buffer_time=2.215 print_stall=10 extruder: target=215 temp=215.1 pwm=0.483
Stats 1123.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=653268 bytes_read=424093 bytes_retransmit=9 bytes_invalid=0 send_seq=21097 receive_seq=21097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=99641 sysload=0.28 cputime=60.403 memavail=1641548 print_time=1134.124 buffer_time=2.120 print_stall=10 extruder: target=215 temp=215.0 pwm=0.483
Stats 1124.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=654389 bytes_read=424533 bytes_retransmit=9 bytes_invalid=0 send_seq=21123 receive_seq=21123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=51.6 mcu_temp: temp=39.4 sd_pos=100104 sysload=0.28 cputime=60.475 memavail=1641296 print_time=1135.112 buffer_time=2.107 print_stall=10 extruder: target=215 temp=215.0 pwm=0.517
Stats 1125.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=655745 bytes_read=424996 bytes_retransmit=9 bytes_invalid=0 send_seq=21155 receive_seq=21155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=100810 sysload=0.28 cputime=60.543 memavail=1641052 print_time=1136.026 buffer_time=2.020 print_stall=10 extruder: target=215 temp=214.9 pwm=0.556
Stats 1126.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=659412 bytes_read=425618 bytes_retransmit=9 bytes_invalid=0 send_seq=21224 receive_seq=21224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=52.1 mcu_temp: temp=39.6 sd_pos=102104 sysload=0.28 cputime=60.626 memavail=1641060 print_time=1137.393 buffer_time=2.386 print_stall=10 extruder: target=215 temp=215.0 pwm=0.455
Stats 1127.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=660216 bytes_read=426020 bytes_retransmit=9 bytes_invalid=0 send_seq=21246 receive_seq=21246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=102256 sysload=0.28 cputime=60.686 memavail=1641328 print_time=1138.287 buffer_time=2.280 print_stall=10 extruder: target=215 temp=214.9 pwm=0.576
Stats 1128.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=661211 bytes_read=426461 bytes_retransmit=9 bytes_invalid=0 send_seq=21271 receive_seq=21271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=52.6 mcu_temp: temp=39.3 sd_pos=102411 sysload=0.26 cputime=60.745 memavail=1641252 print_time=1139.432 buffer_time=2.424 print_stall=10 extruder: target=215 temp=214.9 pwm=0.496
Stats 1129.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000066 bytes_write=661809 bytes_read=426858 bytes_retransmit=9 bytes_invalid=0 send_seq=21290 receive_seq=21290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=52.1 mcu_temp: temp=39.5 sd_pos=102534 sysload=0.26 cputime=60.802 memavail=1641508 print_time=1140.075 buffer_time=2.067 print_stall=10 extruder: target=215 temp=214.7 pwm=0.556
Stats 1130.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000066 bytes_write=662700 bytes_read=427300 bytes_retransmit=9 bytes_invalid=0 send_seq=21315 receive_seq=21315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=51.6 mcu_temp: temp=39.6 sd_pos=102660 sysload=0.26 cputime=60.863 memavail=1641756 print_time=1141.474 buffer_time=2.465 print_stall=10 extruder: target=215 temp=214.7 pwm=0.588
Stats 1131.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000066 bytes_write=663368 bytes_read=427711 bytes_retransmit=9 bytes_invalid=0 send_seq=21337 receive_seq=21337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=52.1 mcu_temp: temp=39.3 sd_pos=102750 sysload=0.26 cputime=60.904 memavail=1641968 print_time=1142.233 buffer_time=2.224 print_stall=10 extruder: target=215 temp=214.6 pwm=0.596
Stats 1132.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000066 bytes_write=664280 bytes_read=428118 bytes_retransmit=9 bytes_invalid=0 send_seq=21361 receive_seq=21361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=52.6 mcu_temp: temp=39.5 sd_pos=102872 sysload=0.26 cputime=60.950 memavail=1642088 print_time=1143.802 buffer_time=2.791 print_stall=10 extruder: target=215 temp=214.5 pwm=0.596
Stats 1133.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000066 bytes_write=664906 bytes_read=428530 bytes_retransmit=9 bytes_invalid=0 send_seq=21380 receive_seq=21380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=102966 sysload=0.24 cputime=61.007 memavail=1642340 print_time=1144.639 buffer_time=2.628 print_stall=10 extruder: target=215 temp=214.5 pwm=0.533
Stats 1134.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=665579 bytes_read=428946 bytes_retransmit=9 bytes_invalid=0 send_seq=21400 receive_seq=21400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996430 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=53.6 mcu_temp: temp=39.6 sd_pos=103028 sysload=0.24 cputime=61.064 memavail=1642556 print_time=1145.469 buffer_time=2.456 print_stall=10 extruder: target=215 temp=214.5 pwm=0.533
Stats 1135.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=666195 bytes_read=429328 bytes_retransmit=9 bytes_invalid=0 send_seq=21419 receive_seq=21419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=52.6 mcu_temp: temp=39.7 sd_pos=103091 sysload=0.24 cputime=61.119 memavail=1642360 print_time=1146.327 buffer_time=2.314 print_stall=10 extruder: target=215 temp=214.8 pwm=0.368
Stats 1136.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=666800 bytes_read=429740 bytes_retransmit=9 bytes_invalid=0 send_seq=21438 receive_seq=21438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=53.6 mcu_temp: temp=39.5 sd_pos=103181 sysload=0.24 cputime=61.176 memavail=1642364 print_time=1147.200 buffer_time=2.187 print_stall=10 extruder: target=215 temp=214.6 pwm=0.531
Stats 1137.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=667455 bytes_read=430156 bytes_retransmit=9 bytes_invalid=0 send_seq=21461 receive_seq=21461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=54.9 pwm=0.582 rpi: temp=53.6 mcu_temp: temp=39.5 sd_pos=103244 sysload=0.24 cputime=61.233 memavail=1642092 print_time=1148.086 buffer_time=2.072 print_stall=10 extruder: target=215 temp=214.9 pwm=0.380
Stats 1138.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=668386 bytes_read=430563 bytes_retransmit=9 bytes_invalid=0 send_seq=21485 receive_seq=21485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=52.1 mcu_temp: temp=39.4 sd_pos=103370 sysload=0.22 cputime=61.291 memavail=1642092 print_time=1149.880 buffer_time=2.866 print_stall=10 extruder: target=215 temp=214.9 pwm=0.437
Stats 1139.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=669074 bytes_read=431000 bytes_retransmit=9 bytes_invalid=0 send_seq=21506 receive_seq=21506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=53.1 mcu_temp: temp=39.6 sd_pos=103463 sysload=0.22 cputime=61.342 memavail=1640972 print_time=1150.801 buffer_time=2.786 print_stall=10 extruder: target=215 temp=215.0 pwm=0.408
Stats 1140.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=669703 bytes_read=431396 bytes_retransmit=9 bytes_invalid=0 send_seq=21525 receive_seq=21525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.1 pwm=0.054 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=103525 sysload=0.22 cputime=61.384 memavail=1640940 print_time=1151.699 buffer_time=2.684 print_stall=10 extruder: target=215 temp=215.0 pwm=0.521
Stats 1141.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=670333 bytes_read=431783 bytes_retransmit=9 bytes_invalid=0 send_seq=21545 receive_seq=21545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.1 pwm=0.246 rpi: temp=53.6 mcu_temp: temp=39.5 sd_pos=103586 sysload=0.22 cputime=61.439 memavail=1640980 print_time=1152.610 buffer_time=2.594 print_stall=10 extruder: target=215 temp=215.2 pwm=0.408
Stats 1142.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=670998 bytes_read=432195 bytes_retransmit=9 bytes_invalid=0 send_seq=21564 receive_seq=21564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.427 rpi: temp=52.1 mcu_temp: temp=39.7 sd_pos=103650 sysload=0.22 cputime=61.497 memavail=1641156 print_time=1153.521 buffer_time=2.503 print_stall=10 extruder: target=215 temp=215.2 pwm=0.475
Stats 1143.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=671604 bytes_read=432586 bytes_retransmit=9 bytes_invalid=0 send_seq=21582 receive_seq=21582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=53.1 mcu_temp: temp=40.1 sd_pos=103712 sysload=0.20 cputime=61.554 memavail=1641448 print_time=1154.432 buffer_time=2.414 print_stall=10 extruder: target=215 temp=215.3 pwm=0.435
Stats 1144.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=672203 bytes_read=432978 bytes_retransmit=9 bytes_invalid=0 send_seq=21600 receive_seq=21600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=52.6 mcu_temp: temp=39.9 sd_pos=103775 sysload=0.20 cputime=61.608 memavail=1641944 print_time=1155.336 buffer_time=2.317 print_stall=10 extruder: target=215 temp=215.4 pwm=0.435
Stats 1145.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=672815 bytes_read=433390 bytes_retransmit=9 bytes_invalid=0 send_seq=21619 receive_seq=21619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=103836 sysload=0.20 cputime=61.650 memavail=1641464 print_time=1156.232 buffer_time=2.213 print_stall=10 extruder: target=215 temp=215.4 pwm=0.490
Stats 1146.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=673400 bytes_read=433776 bytes_retransmit=9 bytes_invalid=0 send_seq=21636 receive_seq=21636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=52.1 mcu_temp: temp=39.8 sd_pos=103930 sysload=0.20 cputime=61.703 memavail=1641324 print_time=1157.121 buffer_time=2.101 print_stall=10 extruder: target=215 temp=215.4 pwm=0.490
Stats 1147.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=674395 bytes_read=434198 bytes_retransmit=9 bytes_invalid=0 send_seq=21663 receive_seq=21663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.1 pwm=0.103 rpi: temp=53.6 mcu_temp: temp=39.8 sd_pos=104053 sysload=0.20 cputime=61.763 memavail=1641336 print_time=1158.864 buffer_time=2.843 print_stall=10 extruder: target=215 temp=215.4 pwm=0.475
Stats 1148.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=675037 bytes_read=434626 bytes_retransmit=9 bytes_invalid=0 send_seq=21683 receive_seq=21683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=53.1 mcu_temp: temp=39.8 sd_pos=104112 sysload=0.18 cputime=61.820 memavail=1641076 print_time=1159.713 buffer_time=2.691 print_stall=10 extruder: target=215 temp=215.3 pwm=0.545
Stats 1149.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=675614 bytes_read=435027 bytes_retransmit=9 bytes_invalid=0 send_seq=21700 receive_seq=21700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=52.1 mcu_temp: temp=39.9 sd_pos=104172 sysload=0.18 cputime=61.873 memavail=1641024 print_time=1160.546 buffer_time=2.524 print_stall=10 extruder: target=215 temp=215.2 pwm=0.484
Stats 1150.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=676235 bytes_read=435409 bytes_retransmit=9 bytes_invalid=0 send_seq=21719 receive_seq=21719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=54.9 pwm=0.484 rpi: temp=53.1 mcu_temp: temp=40.0 sd_pos=104232 sysload=0.18 cputime=61.929 memavail=1640796 print_time=1161.357 buffer_time=2.334 print_stall=10 extruder: target=215 temp=215.3 pwm=0.484
Stats 1151.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=676863 bytes_read=435826 bytes_retransmit=9 bytes_invalid=0 send_seq=21739 receive_seq=21739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.065 rpi: temp=52.6 mcu_temp: temp=39.9 sd_pos=104296 sysload=0.18 cputime=61.990 memavail=1641040 print_time=1162.144 buffer_time=2.120 print_stall=10 extruder: target=215 temp=215.2 pwm=0.501
Stats 1152.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=677841 bytes_read=436247 bytes_retransmit=9 bytes_invalid=0 send_seq=21763 receive_seq=21763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=52.6 mcu_temp: temp=40.2 sd_pos=104453 sysload=0.18 cputime=62.049 memavail=1641288 print_time=1163.636 buffer_time=2.612 print_stall=10 extruder: target=215 temp=215.2 pwm=0.471
Stats 1153.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=678472 bytes_read=436624 bytes_retransmit=9 bytes_invalid=0 send_seq=21781 receive_seq=21781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.9 pwm=0.507 rpi: temp=52.1 mcu_temp: temp=39.6 sd_pos=104515 sysload=0.17 cputime=62.104 memavail=1641300 print_time=1164.332 buffer_time=2.308 print_stall=10 extruder: target=215 temp=215.2 pwm=0.471
Stats 1154.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=679339 bytes_read=437076 bytes_retransmit=9 bytes_invalid=0 send_seq=21805 receive_seq=21805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=104641 sysload=0.17 cputime=62.163 memavail=1641004 print_time=1165.607 buffer_time=2.583 print_stall=10 extruder: target=215 temp=215.2 pwm=0.462
Stats 1155.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=679936 bytes_read=437462 bytes_retransmit=9 bytes_invalid=0 send_seq=21822 receive_seq=21822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=52.6 mcu_temp: temp=39.4 sd_pos=104736 sysload=0.17 cputime=62.219 memavail=1640908 print_time=1166.189 buffer_time=2.163 print_stall=10 extruder: target=215 temp=215.1 pwm=0.543
Stats 1156.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=680680 bytes_read=437859 bytes_retransmit=9 bytes_invalid=0 send_seq=21844 receive_seq=21844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=53.1 mcu_temp: temp=39.9 sd_pos=104894 sysload=0.17 cputime=62.281 memavail=1641220 print_time=1167.123 buffer_time=2.097 print_stall=10 extruder: target=215 temp=215.2 pwm=0.476
Stats 1157.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=682017 bytes_read=438326 bytes_retransmit=9 bytes_invalid=0 send_seq=21874 receive_seq=21874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=105456 sysload=0.17 cputime=62.343 memavail=1640912 print_time=1168.048 buffer_time=2.022 print_stall=10 extruder: target=215 temp=215.1 pwm=0.482
Stats 1158.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=682903 bytes_read=438742 bytes_retransmit=9 bytes_invalid=0 send_seq=21897 receive_seq=21897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.0 pwm=0.406 rpi: temp=52.1 mcu_temp: temp=40.0 sd_pos=105939 sysload=0.16 cputime=62.390 memavail=1640684 print_time=1169.344 buffer_time=2.316 print_stall=10 extruder: target=215 temp=215.0 pwm=0.520
Stats 1159.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=683637 bytes_read=439149 bytes_retransmit=9 bytes_invalid=0 send_seq=21918 receive_seq=21918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=53.1 mcu_temp: temp=39.6 sd_pos=106313 sysload=0.16 cputime=62.455 memavail=1640696 print_time=1170.316 buffer_time=2.285 print_stall=10 extruder: target=215 temp=215.0 pwm=0.502
Stats 1160.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=684578 bytes_read=439581 bytes_retransmit=9 bytes_invalid=0 send_seq=21941 receive_seq=21941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=52.6 mcu_temp: temp=39.9 sd_pos=106692 sysload=0.16 cputime=62.519 memavail=1640844 print_time=1171.183 buffer_time=2.150 print_stall=10 extruder: target=215 temp=215.1 pwm=0.502
Stats 1161.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=685265 bytes_read=439977 bytes_retransmit=9 bytes_invalid=0 send_seq=21960 receive_seq=21960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.443 rpi: temp=53.6 mcu_temp: temp=39.8 sd_pos=107060 sysload=0.16 cputime=62.578 memavail=1641148 print_time=1172.198 buffer_time=2.163 print_stall=10 extruder: target=215 temp=215.0 pwm=0.502
Stats 1162.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=686050 bytes_read=440369 bytes_retransmit=9 bytes_invalid=0 send_seq=21981 receive_seq=21981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.9 pwm=0.526 rpi: temp=53.1 mcu_temp: temp=39.6 sd_pos=107476 sysload=0.16 cputime=62.636 memavail=1641148 print_time=1173.212 buffer_time=2.176 print_stall=10 extruder: target=215 temp=215.1 pwm=0.498
Stats 1163.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=687709 bytes_read=440861 bytes_retransmit=9 bytes_invalid=0 send_seq=22016 receive_seq=22016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=53.1 mcu_temp: temp=39.5 sd_pos=108121 sysload=0.14 cputime=62.703 memavail=1641148 print_time=1174.146 buffer_time=2.108 print_stall=10 extruder: target=215 temp=214.9 pwm=0.575
Stats 1164.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=691150 bytes_read=441507 bytes_retransmit=9 bytes_invalid=0 send_seq=22082 receive_seq=22082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=52.6 mcu_temp: temp=39.7 sd_pos=109144 sysload=0.14 cputime=62.785 memavail=1641148 print_time=1175.489 buffer_time=2.449 print_stall=10 extruder: target=215 temp=215.0 pwm=0.544
Stats 1165.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=691940 bytes_read=441909 bytes_retransmit=9 bytes_invalid=0 send_seq=22105 receive_seq=22105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=53.1 mcu_temp: temp=39.9 sd_pos=109301 sysload=0.14 cputime=62.839 memavail=1641460 print_time=1176.462 buffer_time=2.419 print_stall=10 extruder: target=215 temp=215.0 pwm=0.484
Stats 1166.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=692591 bytes_read=442331 bytes_retransmit=9 bytes_invalid=0 send_seq=22126 receive_seq=22126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=53.1 mcu_temp: temp=40.1 sd_pos=109364 sysload=0.14 cputime=62.894 memavail=1641480 print_time=1177.043 buffer_time=2.000 print_stall=10 extruder: target=215 temp=215.0 pwm=0.550
Stats 1167.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=693505 bytes_read=442762 bytes_retransmit=9 bytes_invalid=0 send_seq=22152 receive_seq=22152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.1 pwm=0.085 rpi: temp=52.6 mcu_temp: temp=39.8 sd_pos=109518 sysload=0.14 cputime=62.957 memavail=1641472 print_time=1178.347 buffer_time=2.304 print_stall=10 extruder: target=215 temp=214.9 pwm=0.550
Stats 1168.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=694096 bytes_read=443159 bytes_retransmit=9 bytes_invalid=0 send_seq=22174 receive_seq=22174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.0 pwm=0.350 rpi: temp=52.6 mcu_temp: temp=39.6 sd_pos=109579 sysload=0.13 cputime=63.011 memavail=1641572 print_time=1179.047 buffer_time=2.003 print_stall=10 extruder: target=215 temp=215.0 pwm=0.451
Stats 1169.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=694984 bytes_read=443606 bytes_retransmit=9 bytes_invalid=0 send_seq=22197 receive_seq=22197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=39.6 sd_pos=109736 sysload=0.13 cputime=63.069 memavail=1641472 print_time=1180.573 buffer_time=2.529 print_stall=10 extruder: target=215 temp=214.7 pwm=0.652
Stats 1170.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=695680 bytes_read=444022 bytes_retransmit=9 bytes_invalid=0 send_seq=22220 receive_seq=22220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.0 sd_pos=109798 sysload=0.13 cputime=63.124 memavail=1641712 print_time=1181.372 buffer_time=2.327 print_stall=10 extruder: target=215 temp=214.5 pwm=0.677
Stats 1171.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=696295 bytes_read=444409 bytes_retransmit=9 bytes_invalid=0 send_seq=22240 receive_seq=22240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=53.1 mcu_temp: temp=39.6 sd_pos=109858 sysload=0.13 cputime=63.176 memavail=1641660 print_time=1182.197 buffer_time=2.152 print_stall=10 extruder: target=215 temp=214.7 pwm=0.547
Exiting SD card print (position 109890)
action:cancel
Stats 1172.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=696874 bytes_read=444821 bytes_retransmit=9 bytes_invalid=0 send_seq=22259 receive_seq=22259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=55.1 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=39.6  sysload=0.13 cputime=63.251 memavail=1641456 print_time=1182.197 buffer_time=1.151 print_stall=10 extruder: target=0 temp=214.7 pwm=0.000
Stats 1173.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=697425 bytes_read=445202 bytes_retransmit=9 bytes_invalid=0 send_seq=22275 receive_seq=22275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=40.2  sysload=0.12 cputime=63.301 memavail=1641252 print_time=1183.053 buffer_time=1.006 print_stall=10 extruder: target=0 temp=214.6 pwm=0.000
Stats 1174.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=697685 bytes_read=445564 bytes_retransmit=9 bytes_invalid=0 send_seq=22287 receive_seq=22287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.1  sysload=0.12 cputime=63.351 memavail=1641336 print_time=1185.185 buffer_time=2.137 print_stall=11 extruder: target=0 temp=214.6 pwm=0.000
Stats 1175.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=697891 bytes_read=445931 bytes_retransmit=9 bytes_invalid=0 send_seq=22297 receive_seq=22297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=40.0  sysload=0.12 cputime=63.402 memavail=1640924 print_time=1185.185 buffer_time=1.136 print_stall=11 extruder: target=0 temp=214.5 pwm=0.000
Stats 1176.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=698047 bytes_read=446287 bytes_retransmit=9 bytes_invalid=0 send_seq=22308 receive_seq=22308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.5  sysload=0.12 cputime=63.434 memavail=1641060 print_time=1185.185 buffer_time=0.135 print_stall=11 extruder: target=0 temp=214.4 pwm=0.000
Stats 1177.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=698245 bytes_read=446629 bytes_retransmit=9 bytes_invalid=0 send_seq=22319 receive_seq=22319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=39.8  sysload=0.12 cputime=63.467 memavail=1640988 print_time=1185.185 buffer_time=0.000 print_stall=11 extruder: target=0 temp=214.2 pwm=0.000
Stats 1178.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000063 bytes_write=698445 bytes_read=447001 bytes_retransmit=9 bytes_invalid=0 send_seq=22330 receive_seq=22330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.8 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=39.9  sysload=0.11 cputime=63.516 memavail=1641068 print_time=1186.452 buffer_time=0.000 print_stall=11 extruder: target=0 temp=213.9 pwm=0.000
Stats 1179.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000044 bytes_write=698610 bytes_read=447367 bytes_retransmit=9 bytes_invalid=0 send_seq=22340 receive_seq=22340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.7 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=39.7  sysload=0.11 cputime=63.561 memavail=1640812 print_time=1186.452 buffer_time=0.000 print_stall=11 extruder: target=0 temp=213.2 pwm=0.000
Stats 1180.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000044 bytes_write=699198 bytes_read=447739 bytes_retransmit=9 bytes_invalid=0 send_seq=22357 receive_seq=22357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=54.8 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.0  sysload=0.11 cputime=63.610 memavail=1640956 print_time=1189.419 buffer_time=0.366 print_stall=11 extruder: target=0 temp=212.9 pwm=0.000
Stats 1181.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000044 bytes_write=700031 bytes_read=448166 bytes_retransmit=9 bytes_invalid=0 send_seq=22379 receive_seq=22379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.2  sysload=0.11 cputime=63.669 memavail=1640996 print_time=1190.247 buffer_time=0.194 print_stall=15 extruder: target=0 temp=212.3 pwm=0.000
Stats 1182.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000044 bytes_write=701064 bytes_read=448582 bytes_retransmit=9 bytes_invalid=0 send_seq=22402 receive_seq=22402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=39.9  sysload=0.11 cputime=63.723 memavail=1640988 print_time=1191.349 buffer_time=0.294 print_stall=18 extruder: target=0 temp=211.6 pwm=0.000
Stats 1183.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000044 bytes_write=701240 bytes_read=448913 bytes_retransmit=9 bytes_invalid=0 send_seq=22411 receive_seq=22411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=40.7  sysload=0.10 cputime=63.759 memavail=1641564 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=211.0 pwm=0.000
Stats 1184.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=701419 bytes_read=449282 bytes_retransmit=9 bytes_invalid=0 send_seq=22421 receive_seq=22421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.7  sysload=0.10 cputime=63.804 memavail=1641972 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=210.3 pwm=0.000
Stats 1185.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=701570 bytes_read=449622 bytes_retransmit=9 bytes_invalid=0 send_seq=22431 receive_seq=22431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1  sysload=0.10 cputime=63.846 memavail=1641884 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=209.5 pwm=0.000
Stats 1186.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=701711 bytes_read=449949 bytes_retransmit=9 bytes_invalid=0 send_seq=22441 receive_seq=22441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.7  sysload=0.10 cputime=63.887 memavail=1641808 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=208.7 pwm=0.000
Stats 1187.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=701829 bytes_read=450304 bytes_retransmit=9 bytes_invalid=0 send_seq=22450 receive_seq=22450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.0  sysload=0.10 cputime=63.933 memavail=1642028 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=208.0 pwm=0.000
Stats 1188.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=701966 bytes_read=450655 bytes_retransmit=9 bytes_invalid=0 send_seq=22460 receive_seq=22460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.1 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.4  sysload=0.09 cputime=63.975 memavail=1642348 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=207.1 pwm=0.000
Stats 1189.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=702103 bytes_read=451007 bytes_retransmit=9 bytes_invalid=0 send_seq=22470 receive_seq=22470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.1 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=39.9  sysload=0.09 cputime=64.019 memavail=1642468 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=206.2 pwm=0.000
Stats 1190.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=702240 bytes_read=451374 bytes_retransmit=9 bytes_invalid=0 send_seq=22480 receive_seq=22480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.1 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.5  sysload=0.09 cputime=64.065 memavail=1642060 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=205.5 pwm=0.000
Stats 1191.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=702377 bytes_read=451725 bytes_retransmit=9 bytes_invalid=0 send_seq=22490 receive_seq=22490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=54.0 pwm=0.000 rpi: temp=52.6 mcu_temp: temp=39.8  sysload=0.09 cputime=64.108 memavail=1642016 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=204.5 pwm=0.000
Stats 1192.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=702495 bytes_read=452057 bytes_retransmit=9 bytes_invalid=0 send_seq=22499 receive_seq=22499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.1  sysload=0.09 cputime=64.151 memavail=1641560 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=203.6 pwm=0.000
Stats 1193.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=702632 bytes_read=452424 bytes_retransmit=9 bytes_invalid=0 send_seq=22509 receive_seq=22509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.3  sysload=0.09 cputime=64.187 memavail=1641648 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=203.0 pwm=0.000
Stats 1194.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=702769 bytes_read=452790 bytes_retransmit=9 bytes_invalid=0 send_seq=22519 receive_seq=22519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.6  sysload=0.09 cputime=64.231 memavail=1641696 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=201.8 pwm=0.000
Stats 1195.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=702906 bytes_read=453127 bytes_retransmit=9 bytes_invalid=0 send_seq=22529 receive_seq=22529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=53.7 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.2  sysload=0.09 cputime=64.265 memavail=1641704 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=201.0 pwm=0.000
Stats 1196.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=703043 bytes_read=453494 bytes_retransmit=9 bytes_invalid=0 send_seq=22539 receive_seq=22539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.8  sysload=0.09 cputime=64.308 memavail=1641816 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=200.0 pwm=0.000
Stats 1197.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=703180 bytes_read=453845 bytes_retransmit=9 bytes_invalid=0 send_seq=22549 receive_seq=22549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=53.7 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.3  sysload=0.09 cputime=64.351 memavail=1641648 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=199.1 pwm=0.000
Stats 1198.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=703321 bytes_read=454182 bytes_retransmit=9 bytes_invalid=0 send_seq=22559 receive_seq=22559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=39.9  sysload=0.08 cputime=64.393 memavail=1642040 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=198.3 pwm=0.000
Stats 1199.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=703458 bytes_read=454578 bytes_retransmit=9 bytes_invalid=0 send_seq=22569 receive_seq=22569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.0  sysload=0.08 cputime=64.439 memavail=1641896 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=197.1 pwm=0.000
Stats 1200.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=703595 bytes_read=454915 bytes_retransmit=9 bytes_invalid=0 send_seq=22579 receive_seq=22579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=53.4 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=41.0  sysload=0.08 cputime=64.483 memavail=1641900 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=196.3 pwm=0.000
Stats 1201.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=703751 bytes_read=455257 bytes_retransmit=9 bytes_invalid=0 send_seq=22590 receive_seq=22590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=53.3 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.4  sysload=0.08 cputime=64.528 memavail=1642152 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=195.3 pwm=0.000
Stats 1202.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=703869 bytes_read=455633 bytes_retransmit=9 bytes_invalid=0 send_seq=22599 receive_seq=22599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=53.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1  sysload=0.08 cputime=64.564 memavail=1641952 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=194.3 pwm=0.000
Stats 1203.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=704025 bytes_read=455975 bytes_retransmit=9 bytes_invalid=0 send_seq=22610 receive_seq=22610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=53.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.4  sysload=0.15 cputime=64.600 memavail=1641616 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=193.4 pwm=0.000
Stats 1204.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=704143 bytes_read=456322 bytes_retransmit=9 bytes_invalid=0 send_seq=22619 receive_seq=22619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=53.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.6  sysload=0.15 cputime=64.642 memavail=1641616 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=192.6 pwm=0.000
Stats 1205.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=704280 bytes_read=456703 bytes_retransmit=9 bytes_invalid=0 send_seq=22629 receive_seq=22629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=52.9 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.7  sysload=0.15 cputime=64.685 memavail=1641988 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=191.5 pwm=0.000
Stats 1206.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=704417 bytes_read=457040 bytes_retransmit=9 bytes_invalid=0 send_seq=22639 receive_seq=22639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=52.8 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=39.9  sysload=0.15 cputime=64.718 memavail=1642556 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=190.6 pwm=0.000
Stats 1207.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=704554 bytes_read=457377 bytes_retransmit=9 bytes_invalid=0 send_seq=22649 receive_seq=22649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=52.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.7  sysload=0.15 cputime=64.764 memavail=1642252 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=189.8 pwm=0.000
Stats 1208.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=704691 bytes_read=457758 bytes_retransmit=9 bytes_invalid=0 send_seq=22659 receive_seq=22659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=52.4 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.6  sysload=0.14 cputime=64.811 memavail=1642412 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=188.6 pwm=0.000
Stats 1209.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=704857 bytes_read=458131 bytes_retransmit=9 bytes_invalid=0 send_seq=22671 receive_seq=22671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=52.5 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=40.4  sysload=0.14 cputime=64.855 memavail=1642188 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=187.8 pwm=0.000
Stats 1210.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=704994 bytes_read=458468 bytes_retransmit=9 bytes_invalid=0 send_seq=22681 receive_seq=22681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.5  sysload=0.14 cputime=64.902 memavail=1641952 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=186.9 pwm=0.000
Stats 1211.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=705131 bytes_read=458849 bytes_retransmit=9 bytes_invalid=0 send_seq=22691 receive_seq=22691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=52.3 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.9  sysload=0.14 cputime=64.951 memavail=1641932 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=185.7 pwm=0.000
Stats 1212.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=705268 bytes_read=459186 bytes_retransmit=9 bytes_invalid=0 send_seq=22701 receive_seq=22701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=52.3 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.3  sysload=0.14 cputime=64.994 memavail=1642412 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=184.9 pwm=0.000
Stats 1213.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=705405 bytes_read=459538 bytes_retransmit=9 bytes_invalid=0 send_seq=22711 receive_seq=22711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=52.3 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.0  sysload=0.13 cputime=65.031 memavail=1642128 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=184.0 pwm=0.000
Stats 1214.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=705542 bytes_read=459919 bytes_retransmit=9 bytes_invalid=0 send_seq=22721 receive_seq=22721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.7  sysload=0.13 cputime=65.077 memavail=1642052 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=183.0 pwm=0.000
Stats 1215.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=705679 bytes_read=460256 bytes_retransmit=9 bytes_invalid=0 send_seq=22731 receive_seq=22731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=39.7  sysload=0.13 cputime=65.120 memavail=1642072 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=182.0 pwm=0.000
Stats 1216.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=705816 bytes_read=460608 bytes_retransmit=9 bytes_invalid=0 send_seq=22741 receive_seq=22741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.6  sysload=0.13 cputime=65.165 memavail=1641784 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=181.3 pwm=0.000
Stats 1217.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=705953 bytes_read=460974 bytes_retransmit=9 bytes_invalid=0 send_seq=22751 receive_seq=22751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1  sysload=0.13 cputime=65.208 memavail=1641760 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=180.1 pwm=0.000
Stats 1218.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=706090 bytes_read=461311 bytes_retransmit=9 bytes_invalid=0 send_seq=22761 receive_seq=22761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.9  sysload=0.20 cputime=65.253 memavail=1641748 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=179.3 pwm=0.000
Stats 1219.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=706231 bytes_read=461678 bytes_retransmit=9 bytes_invalid=0 send_seq=22771 receive_seq=22771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=39.8  sysload=0.20 cputime=65.301 memavail=1641504 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=178.4 pwm=0.000
Stats 1220.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=706368 bytes_read=462044 bytes_retransmit=9 bytes_invalid=0 send_seq=22781 receive_seq=22781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=51.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.8  sysload=0.20 cputime=65.346 memavail=1641824 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=177.3 pwm=0.000
Stats 1221.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=706505 bytes_read=462381 bytes_retransmit=9 bytes_invalid=0 send_seq=22791 receive_seq=22791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=51.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.0  sysload=0.20 cputime=65.391 memavail=1641948 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=176.6 pwm=0.000
Stats 1222.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=706623 bytes_read=462728 bytes_retransmit=9 bytes_invalid=0 send_seq=22800 receive_seq=22800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=51.6 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=39.8  sysload=0.20 cputime=65.423 memavail=1642188 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=175.7 pwm=0.000
Stats 1223.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=706779 bytes_read=463099 bytes_retransmit=9 bytes_invalid=0 send_seq=22811 receive_seq=22811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=51.5 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.2  sysload=0.18 cputime=65.456 memavail=1642696 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=174.6 pwm=0.000
Stats 1224.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=706916 bytes_read=463451 bytes_retransmit=9 bytes_invalid=0 send_seq=22821 receive_seq=22821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=51.4 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1  sysload=0.18 cputime=65.485 memavail=1642452 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=173.8 pwm=0.000
Stats 1225.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=707053 bytes_read=463803 bytes_retransmit=9 bytes_invalid=0 send_seq=22831 receive_seq=22831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=51.4 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.3  sysload=0.18 cputime=65.529 memavail=1642696 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=172.8 pwm=0.000
Stats 1226.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=707190 bytes_read=464169 bytes_retransmit=9 bytes_invalid=0 send_seq=22841 receive_seq=22841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=0 temp=51.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.8  sysload=0.18 cputime=65.573 memavail=1642768 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=171.9 pwm=0.000
Stats 1227.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=707327 bytes_read=464506 bytes_retransmit=9 bytes_invalid=0 send_seq=22851 receive_seq=22851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=51.1 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.0  sysload=0.18 cputime=65.619 memavail=1643140 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=171.1 pwm=0.000
Stats 1228.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=707464 bytes_read=464858 bytes_retransmit=9 bytes_invalid=0 send_seq=22861 receive_seq=22861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=51.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.0  sysload=0.17 cputime=65.662 memavail=1642560 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=170.3 pwm=0.000
Stats 1229.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=707601 bytes_read=465239 bytes_retransmit=9 bytes_invalid=0 send_seq=22871 receive_seq=22871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=0 temp=51.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1  sysload=0.17 cputime=65.705 memavail=1642828 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=169.3 pwm=0.000
Stats 1230.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=707742 bytes_read=465576 bytes_retransmit=9 bytes_invalid=0 send_seq=22881 receive_seq=22881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=0 temp=50.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.6  sysload=0.17 cputime=65.749 memavail=1642560 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=168.5 pwm=0.000
Stats 1231.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=707860 bytes_read=465923 bytes_retransmit=9 bytes_invalid=0 send_seq=22890 receive_seq=22890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=50.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.8  sysload=0.17 cputime=65.796 memavail=1642076 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=167.7 pwm=0.000
Stats 1232.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=707997 bytes_read=466289 bytes_retransmit=9 bytes_invalid=0 send_seq=22900 receive_seq=22900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=50.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.9  sysload=0.17 cputime=65.841 memavail=1642068 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=166.7 pwm=0.000
Stats 1233.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=708134 bytes_read=466626 bytes_retransmit=9 bytes_invalid=0 send_seq=22910 receive_seq=22910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=50.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.2  sysload=0.15 cputime=65.885 memavail=1642004 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=165.8 pwm=0.000
Stats 1234.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=708271 bytes_read=466993 bytes_retransmit=9 bytes_invalid=0 send_seq=22920 receive_seq=22920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=50.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1  sysload=0.15 cputime=65.919 memavail=1641564 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=165.1 pwm=0.000
Stats 1235.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=708408 bytes_read=467359 bytes_retransmit=9 bytes_invalid=0 send_seq=22930 receive_seq=22930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=50.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.7  sysload=0.15 cputime=65.964 memavail=1641508 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=164.1 pwm=0.000
Stats 1236.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=708545 bytes_read=467696 bytes_retransmit=9 bytes_invalid=0 send_seq=22940 receive_seq=22940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=50.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.0  sysload=0.15 cputime=66.006 memavail=1641228 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=163.5 pwm=0.000
Stats 1237.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=708663 bytes_read=468043 bytes_retransmit=9 bytes_invalid=0 send_seq=22949 receive_seq=22949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=50.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.1  sysload=0.15 cputime=66.050 memavail=1641396 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=162.6 pwm=0.000
Stats 1238.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=708833 bytes_read=468414 bytes_retransmit=9 bytes_invalid=0 send_seq=22960 receive_seq=22960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=50.4 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=40.4  sysload=0.14 cputime=66.093 memavail=1641484 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=161.7 pwm=0.000
Stats 1239.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=708984 bytes_read=468766 bytes_retransmit=9 bytes_invalid=0 send_seq=22970 receive_seq=22970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996430 heater_bed: target=0 temp=50.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.7  sysload=0.14 cputime=66.135 memavail=1641892 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=161.0 pwm=0.000
Stats 1240.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=709121 bytes_read=469118 bytes_retransmit=9 bytes_invalid=0 send_seq=22980 receive_seq=22980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=0 temp=50.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.8  sysload=0.14 cputime=66.181 memavail=1642044 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=160.3 pwm=0.000
Stats 1241.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=709258 bytes_read=469484 bytes_retransmit=9 bytes_invalid=0 send_seq=22990 receive_seq=22990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=0 temp=50.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7  sysload=0.14 cputime=66.224 memavail=1642308 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=159.3 pwm=0.000
Stats 1242.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=709399 bytes_read=469821 bytes_retransmit=9 bytes_invalid=0 send_seq=23000 receive_seq=23000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=0 temp=50.1 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=39.7  sysload=0.14 cputime=66.266 memavail=1642300 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=158.6 pwm=0.000
Stats 1243.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=709517 bytes_read=470161 bytes_retransmit=9 bytes_invalid=0 send_seq=23009 receive_seq=23009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=49.9 pwm=0.000 rpi: temp=53.1 mcu_temp: temp=39.4  sysload=0.13 cputime=66.300 memavail=1641132 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=157.8 pwm=0.000
Stats 1244.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=709654 bytes_read=470529 bytes_retransmit=9 bytes_invalid=0 send_seq=23019 receive_seq=23019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=50.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.1  sysload=0.13 cputime=66.344 memavail=1642148 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=156.9 pwm=0.000
Stats 1245.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=709791 bytes_read=470856 bytes_retransmit=9 bytes_invalid=0 send_seq=23029 receive_seq=23029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=49.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.8  sysload=0.13 cputime=66.385 memavail=1641188 print_time=1191.349 buffer_time=0.000 print_stall=18 extruder: target=0 temp=156.3 pwm=0.000
Starting SD card print (position 0)
Stats 1246.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=710332 bytes_read=471237 bytes_retransmit=9 bytes_invalid=0 send_seq=23047 receive_seq=23047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=60 temp=49.7 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=848 sysload=0.13 cputime=66.436 memavail=1641780 print_time=1254.630 buffer_time=0.000 print_stall=18 extruder: target=220 temp=155.6 pwm=1.000
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 220.000
Stats 1247.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=710495 bytes_read=471610 bytes_retransmit=9 bytes_invalid=0 send_seq=23059 receive_seq=23059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=60 temp=49.8 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=848 sysload=0.13 cputime=66.485 memavail=1641532 print_time=1255.631 buffer_time=0.000 print_stall=18 extruder: target=220 temp=154.7 pwm=1.000
Stats 1248.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=710632 bytes_read=471947 bytes_retransmit=9 bytes_invalid=0 send_seq=23069 receive_seq=23069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=60 temp=49.9 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=848 sysload=0.12 cputime=66.529 memavail=1641476 print_time=1256.632 buffer_time=0.000 print_stall=18 extruder: target=220 temp=154.1 pwm=1.000
Stats 1249.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000018 mcu_task_stddev=0.000061 bytes_write=710783 bytes_read=472314 bytes_retransmit=9 bytes_invalid=0 send_seq=23079 receive_seq=23079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=60 temp=49.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.12 cputime=66.578 memavail=1641500 print_time=1257.633 buffer_time=0.000 print_stall=18 extruder: target=220 temp=153.5 pwm=1.000
Stats 1250.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000018 mcu_task_stddev=0.000061 bytes_write=710952 bytes_read=472690 bytes_retransmit=9 bytes_invalid=0 send_seq=23091 receive_seq=23091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=60 temp=50.1 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=848 sysload=0.12 cputime=66.625 memavail=1641300 print_time=1258.633 buffer_time=0.000 print_stall=18 extruder: target=220 temp=153.2 pwm=1.000
Stats 1251.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000018 mcu_task_stddev=0.000061 bytes_write=711103 bytes_read=473027 bytes_retransmit=9 bytes_invalid=0 send_seq=23101 receive_seq=23101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=60 temp=50.1 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.12 cputime=66.669 memavail=1641300 print_time=1259.633 buffer_time=0.000 print_stall=18 extruder: target=220 temp=153.1 pwm=1.000
Stats 1252.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000018 mcu_task_stddev=0.000061 bytes_write=711240 bytes_read=473379 bytes_retransmit=9 bytes_invalid=0 send_seq=23111 receive_seq=23111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=60 temp=50.4 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=848 sysload=0.12 cputime=66.713 memavail=1641308 print_time=1260.634 buffer_time=0.000 print_stall=18 extruder: target=220 temp=153.1 pwm=1.000
Stats 1253.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000018 mcu_task_stddev=0.000061 bytes_write=711377 bytes_read=473745 bytes_retransmit=9 bytes_invalid=0 send_seq=23121 receive_seq=23121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=60 temp=50.5 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=39.4 sd_pos=848 sysload=0.27 cputime=66.752 memavail=1640952 print_time=1261.634 buffer_time=0.000 print_stall=18 extruder: target=220 temp=153.4 pwm=1.000
Stats 1254.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=711546 bytes_read=474107 bytes_retransmit=9 bytes_invalid=0 send_seq=23133 receive_seq=23133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=60 temp=50.5 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=848 sysload=0.27 cputime=66.800 memavail=1640700 print_time=1262.635 buffer_time=0.000 print_stall=18 extruder: target=220 temp=153.7 pwm=1.000
Stats 1255.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=711705 bytes_read=474459 bytes_retransmit=9 bytes_invalid=0 send_seq=23143 receive_seq=23143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=50.9 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=848 sysload=0.27 cputime=66.845 memavail=1640704 print_time=1263.635 buffer_time=0.000 print_stall=18 extruder: target=220 temp=154.3 pwm=1.000
Stats 1256.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=711861 bytes_read=474830 bytes_retransmit=9 bytes_invalid=0 send_seq=23154 receive_seq=23154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=51.1 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.27 cputime=66.892 memavail=1640948 print_time=1264.636 buffer_time=0.000 print_stall=18 extruder: target=220 temp=155.4 pwm=1.000
Stats 1257.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=711993 bytes_read=475162 bytes_retransmit=9 bytes_invalid=0 send_seq=23163 receive_seq=23163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=60 temp=51.3 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=848 sysload=0.27 cputime=66.938 memavail=1641276 print_time=1265.637 buffer_time=0.000 print_stall=18 extruder: target=220 temp=156.2 pwm=1.000
Stats 1258.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=712144 bytes_read=475514 bytes_retransmit=9 bytes_invalid=0 send_seq=23173 receive_seq=23173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=51.5 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.25 cputime=66.990 memavail=1641276 print_time=1266.637 buffer_time=0.000 print_stall=18 extruder: target=220 temp=157.1 pwm=1.000
Stats 1259.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=712341 bytes_read=475905 bytes_retransmit=9 bytes_invalid=0 send_seq=23185 receive_seq=23185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=51.8 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=848 sysload=0.25 cputime=67.041 memavail=1641276 print_time=1267.638 buffer_time=0.000 print_stall=18 extruder: target=220 temp=158.6 pwm=1.000
Stats 1260.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=712492 bytes_read=476242 bytes_retransmit=9 bytes_invalid=0 send_seq=23195 receive_seq=23195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=52.0 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=848 sysload=0.25 cputime=67.087 memavail=1640960 print_time=1268.638 buffer_time=0.000 print_stall=18 extruder: target=220 temp=159.8 pwm=1.000
Stats 1261.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=712666 bytes_read=476614 bytes_retransmit=9 bytes_invalid=0 send_seq=23206 receive_seq=23206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=52.4 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=39.6 sd_pos=848 sysload=0.25 cputime=67.137 memavail=1640964 print_time=1269.639 buffer_time=0.000 print_stall=18 extruder: target=220 temp=161.1 pwm=1.000
Stats 1262.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=712822 bytes_read=476970 bytes_retransmit=9 bytes_invalid=0 send_seq=23217 receive_seq=23217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=60 temp=52.5 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=848 sysload=0.25 cputime=67.189 memavail=1640652 print_time=1270.639 buffer_time=0.000 print_stall=18 extruder: target=220 temp=162.8 pwm=1.000
Stats 1263.1: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=713070 bytes_read=477332 bytes_retransmit=9 bytes_invalid=0 send_seq=23232 receive_seq=23232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=60 temp=52.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=848 sysload=0.23 cputime=67.230 memavail=1641108 print_time=1271.640 buffer_time=0.000 print_stall=18 extruder: target=220 temp=164.1 pwm=1.000
Stats 1264.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=713264 bytes_read=477724 bytes_retransmit=9 bytes_invalid=0 send_seq=23244 receive_seq=23244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=53.4 pwm=0.544 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=848 sysload=0.23 cputime=67.278 memavail=1641312 print_time=1272.640 buffer_time=0.000 print_stall=18 extruder: target=220 temp=165.7 pwm=1.000
Stats 1265.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=713493 bytes_read=478095 bytes_retransmit=9 bytes_invalid=0 send_seq=23258 receive_seq=23258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=60 temp=53.6 pwm=0.986 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.23 cputime=67.326 memavail=1641312 print_time=1273.641 buffer_time=0.000 print_stall=18 extruder: target=220 temp=167.6 pwm=1.000
Stats 1266.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=713689 bytes_read=478447 bytes_retransmit=9 bytes_invalid=0 send_seq=23271 receive_seq=23271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=60 temp=53.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=848 sysload=0.23 cputime=67.359 memavail=1641376 print_time=1274.641 buffer_time=0.000 print_stall=18 extruder: target=220 temp=169.2 pwm=1.000
Stats 1267.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=713875 bytes_read=478824 bytes_retransmit=9 bytes_invalid=0 send_seq=23283 receive_seq=23283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=53.9 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=848 sysload=0.23 cputime=67.407 memavail=1641316 print_time=1275.642 buffer_time=0.000 print_stall=18 extruder: target=220 temp=170.7 pwm=1.000
Stats 1268.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=714049 bytes_read=479180 bytes_retransmit=9 bytes_invalid=0 send_seq=23294 receive_seq=23294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=60 temp=54.2 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=848 sysload=0.21 cputime=67.455 memavail=1641324 print_time=1276.642 buffer_time=0.000 print_stall=18 extruder: target=220 temp=172.7 pwm=1.000
Stats 1269.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=714219 bytes_read=479537 bytes_retransmit=9 bytes_invalid=0 send_seq=23305 receive_seq=23305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=60 temp=54.3 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=848 sysload=0.21 cputime=67.502 memavail=1641388 print_time=1277.643 buffer_time=0.000 print_stall=18 extruder: target=220 temp=174.3 pwm=1.000
Stats 1270.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=714408 bytes_read=479930 bytes_retransmit=9 bytes_invalid=0 send_seq=23318 receive_seq=23318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=54.6 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=848 sysload=0.21 cputime=67.545 memavail=1641580 print_time=1278.644 buffer_time=0.000 print_stall=18 extruder: target=220 temp=175.9 pwm=1.000
Stats 1271.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=714624 bytes_read=480296 bytes_retransmit=9 bytes_invalid=0 send_seq=23331 receive_seq=23331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=54.8 pwm=0.820 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=848 sysload=0.21 cputime=67.591 memavail=1642084 print_time=1279.645 buffer_time=0.000 print_stall=18 extruder: target=220 temp=178.0 pwm=1.000
Stats 1272.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=714842 bytes_read=480653 bytes_retransmit=9 bytes_invalid=0 send_seq=23345 receive_seq=23345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=60 temp=55.2 pwm=0.434 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=848 sysload=0.21 cputime=67.639 memavail=1642020 print_time=1280.645 buffer_time=0.000 print_stall=18 extruder: target=220 temp=179.6 pwm=1.000
Stats 1273.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=715041 bytes_read=481035 bytes_retransmit=9 bytes_invalid=0 send_seq=23358 receive_seq=23358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=60 temp=55.3 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=848 sysload=0.19 cputime=67.686 memavail=1641828 print_time=1281.646 buffer_time=0.000 print_stall=18 extruder: target=220 temp=181.3 pwm=1.000
Heater heater_bed within range of 60.000
Stats 1274.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=715247 bytes_read=481416 bytes_retransmit=9 bytes_invalid=0 send_seq=23371 receive_seq=23371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=60 temp=55.4 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=848 sysload=0.19 cputime=67.737 memavail=1641840 print_time=1282.647 buffer_time=0.000 print_stall=18 extruder: target=220 temp=183.5 pwm=1.000
Stats 1275.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=715451 bytes_read=481773 bytes_retransmit=9 bytes_invalid=0 send_seq=23385 receive_seq=23385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=60 temp=55.8 pwm=0.501 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=848 sysload=0.19 cputime=67.770 memavail=1641308 print_time=1283.647 buffer_time=0.000 print_stall=18 extruder: target=220 temp=185.0 pwm=1.000
Stats 1276.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=715677 bytes_read=482160 bytes_retransmit=9 bytes_invalid=0 send_seq=23399 receive_seq=23399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996421 heater_bed: target=60 temp=56.0 pwm=0.574 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=848 sysload=0.19 cputime=67.819 memavail=1641276 print_time=1284.648 buffer_time=0.000 print_stall=18 extruder: target=220 temp=186.6 pwm=1.000
Stats 1277.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=715869 bytes_read=482516 bytes_retransmit=9 bytes_invalid=0 send_seq=23410 receive_seq=23410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=60 temp=56.2 pwm=0.698 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=848 sysload=0.19 cputime=67.865 memavail=1641336 print_time=1285.649 buffer_time=0.000 print_stall=18 extruder: target=220 temp=188.8 pwm=1.000
Stats 1278.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=716087 bytes_read=482873 bytes_retransmit=9 bytes_invalid=0 send_seq=23424 receive_seq=23424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=60 temp=56.3 pwm=0.815 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=848 sysload=0.18 cputime=67.912 memavail=1641024 print_time=1286.649 buffer_time=0.000 print_stall=18 extruder: target=220 temp=190.5 pwm=1.000
Stats 1279.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=716274 bytes_read=483265 bytes_retransmit=9 bytes_invalid=0 send_seq=23436 receive_seq=23436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996422 heater_bed: target=60 temp=56.7 pwm=0.464 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=848 sysload=0.18 cputime=67.959 memavail=1641032 print_time=1287.650 buffer_time=0.000 print_stall=18 extruder: target=220 temp=192.0 pwm=1.000
Stats 1280.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=716533 bytes_read=483641 bytes_retransmit=9 bytes_invalid=0 send_seq=23451 receive_seq=23451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=60 temp=56.7 pwm=0.928 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=848 sysload=0.18 cputime=68.008 memavail=1641220 print_time=1288.651 buffer_time=0.000 print_stall=18 extruder: target=220 temp=194.2 pwm=1.000
Stats 1281.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=716751 bytes_read=483998 bytes_retransmit=9 bytes_invalid=0 send_seq=23465 receive_seq=23465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=60 temp=56.7 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=848 sysload=0.18 cputime=68.055 memavail=1641340 print_time=1289.651 buffer_time=0.000 print_stall=18 extruder: target=220 temp=195.8 pwm=1.000
Stats 1282.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=716953 bytes_read=484380 bytes_retransmit=9 bytes_invalid=0 send_seq=23478 receive_seq=23478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=56.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=39.4 sd_pos=848 sysload=0.18 cputime=68.103 memavail=1641252 print_time=1290.652 buffer_time=0.000 print_stall=18 extruder: target=220 temp=197.4 pwm=1.000
Stats 1283.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=717166 bytes_read=484746 bytes_retransmit=9 bytes_invalid=0 send_seq=23491 receive_seq=23491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=60 temp=57.0 pwm=0.675 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.16 cputime=68.141 memavail=1640960 print_time=1291.653 buffer_time=0.000 print_stall=18 extruder: target=220 temp=199.5 pwm=1.000
Stats 1284.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=717375 bytes_read=485113 bytes_retransmit=9 bytes_invalid=0 send_seq=23504 receive_seq=23504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=60 temp=57.3 pwm=0.186 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=848 sysload=0.16 cputime=68.189 memavail=1640956 print_time=1292.656 buffer_time=0.000 print_stall=18 extruder: target=220 temp=201.0 pwm=1.000
Stats 1285.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=717588 bytes_read=485495 bytes_retransmit=9 bytes_invalid=0 send_seq=23517 receive_seq=23517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996419 heater_bed: target=60 temp=57.6 pwm=0.744 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=848 sysload=0.16 cputime=68.234 memavail=1641012 print_time=1293.654 buffer_time=0.000 print_stall=18 extruder: target=220 temp=202.7 pwm=1.000
Stats 1286.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=717856 bytes_read=485876 bytes_retransmit=9 bytes_invalid=0 send_seq=23533 receive_seq=23533 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=60 temp=58.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.16 cputime=68.275 memavail=1641112 print_time=1294.655 buffer_time=0.000 print_stall=18 extruder: target=220 temp=204.7 pwm=0.923
Stats 1287.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=718116 bytes_read=486243 bytes_retransmit=9 bytes_invalid=0 send_seq=23549 receive_seq=23549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=58.2 pwm=0.095 rpi: temp=56.0 mcu_temp: temp=39.1 sd_pos=848 sysload=0.16 cputime=68.310 memavail=1640460 print_time=1295.656 buffer_time=0.000 print_stall=18 extruder: target=220 temp=206.3 pwm=0.828
Stats 1288.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000024 bytes_write=718492 bytes_read=486650 bytes_retransmit=9 bytes_invalid=0 send_seq=23567 receive_seq=23567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=60 temp=58.1 pwm=0.921 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=848 sysload=0.23 cputime=68.348 memavail=1640436 print_time=1296.656 buffer_time=0.000 print_stall=18 extruder: target=220 temp=208.0 pwm=0.693
Stats 1289.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=718709 bytes_read=487036 bytes_retransmit=9 bytes_invalid=0 send_seq=23581 receive_seq=23581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=60 temp=58.2 pwm=0.831 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=848 sysload=0.23 cputime=68.383 memavail=1635492 print_time=1297.657 buffer_time=0.000 print_stall=18 extruder: target=220 temp=209.9 pwm=0.611
Stats 1290.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=718942 bytes_read=487393 bytes_retransmit=9 bytes_invalid=0 send_seq=23595 receive_seq=23595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=60 temp=58.2 pwm=0.964 rpi: temp=56.5 mcu_temp: temp=39.5 sd_pos=848 sysload=0.23 cputime=68.415 memavail=1640756 print_time=1298.657 buffer_time=0.000 print_stall=18 extruder: target=220 temp=211.3 pwm=0.598
Stats 1291.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=719203 bytes_read=487790 bytes_retransmit=9 bytes_invalid=0 send_seq=23611 receive_seq=23611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=60 temp=58.4 pwm=0.977 rpi: temp=56.5 mcu_temp: temp=39.2 sd_pos=848 sysload=0.23 cputime=68.450 memavail=1640760 print_time=1299.658 buffer_time=0.000 print_stall=18 extruder: target=220 temp=212.7 pwm=0.477
Stats 1292.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=719417 bytes_read=488161 bytes_retransmit=9 bytes_invalid=0 send_seq=23625 receive_seq=23625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=60 temp=58.5 pwm=0.803 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=848 sysload=0.23 cputime=68.498 memavail=1640956 print_time=1300.658 buffer_time=0.000 print_stall=18 extruder: target=220 temp=214.4 pwm=0.413
Stats 1293.1: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=719618 bytes_read=488508 bytes_retransmit=9 bytes_invalid=0 send_seq=23637 receive_seq=23637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=60 temp=58.7 pwm=0.568 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=848 sysload=0.21 cputime=68.530 memavail=1641516 print_time=1301.659 buffer_time=0.000 print_stall=18 extruder: target=220 temp=215.5 pwm=0.413
Stats 1294.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=719879 bytes_read=488920 bytes_retransmit=9 bytes_invalid=0 send_seq=23653 receive_seq=23653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=60 temp=58.9 pwm=0.445 rpi: temp=56.5 mcu_temp: temp=39.3 sd_pos=848 sysload=0.21 cputime=68.578 memavail=1641244 print_time=1302.660 buffer_time=0.000 print_stall=18 extruder: target=220 temp=216.5 pwm=0.413
Heater extruder within range of 220.000
Stats 1295.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=720077 bytes_read=489286 bytes_retransmit=9 bytes_invalid=0 send_seq=23666 receive_seq=23666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=60 temp=58.9 pwm=0.842 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=848 sysload=0.21 cputime=68.626 memavail=1641276 print_time=1303.660 buffer_time=0.000 print_stall=18 extruder: target=220 temp=217.8 pwm=0.316
Stats 1296.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=720311 bytes_read=489643 bytes_retransmit=9 bytes_invalid=0 send_seq=23680 receive_seq=23680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=60 temp=59.1 pwm=0.574 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=848 sysload=0.21 cputime=68.674 memavail=1640924 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=220 temp=218.6 pwm=0.308
Exiting SD card print (position 879)
action:cancel
Stats 1297.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=720826 bytes_read=490055 bytes_retransmit=9 bytes_invalid=0 send_seq=23699 receive_seq=23699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=59.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.6  sysload=0.21 cputime=68.739 memavail=1641092 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=219.2 pwm=0.000
Stats 1298.1: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=720944 bytes_read=490401 bytes_retransmit=9 bytes_invalid=0 send_seq=23708 receive_seq=23708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=59.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5  sysload=0.19 cputime=68.773 memavail=1640268 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=220.0 pwm=0.000
Stats 1299.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000054 bytes_write=721087 bytes_read=490753 bytes_retransmit=9 bytes_invalid=0 send_seq=23718 receive_seq=23718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=59.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.8  sysload=0.19 cputime=68.806 memavail=1640780 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=220.5 pwm=0.000
Stats 1300.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000054 bytes_write=721247 bytes_read=491125 bytes_retransmit=9 bytes_invalid=0 send_seq=23729 receive_seq=23729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=59.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.4  sysload=0.19 cputime=68.852 memavail=1641008 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=221.0 pwm=0.000
Stats 1301.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000054 bytes_write=721365 bytes_read=491471 bytes_retransmit=9 bytes_invalid=0 send_seq=23738 receive_seq=23738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=59.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4  sysload=0.19 cputime=68.883 memavail=1640780 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=221.1 pwm=0.000
Stats 1302.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000054 bytes_write=721483 bytes_read=491803 bytes_retransmit=9 bytes_invalid=0 send_seq=23747 receive_seq=23747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=59.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6  sysload=0.19 cputime=68.923 memavail=1640720 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=221.1 pwm=0.000
Stats 1303.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000054 bytes_write=721601 bytes_read=492152 bytes_retransmit=9 bytes_invalid=0 send_seq=23756 receive_seq=23756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=59.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5  sysload=0.18 cputime=68.968 memavail=1640728 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=221.2 pwm=0.000
Stats 1304.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=721719 bytes_read=492502 bytes_retransmit=9 bytes_invalid=0 send_seq=23765 receive_seq=23765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=59.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.4  sysload=0.18 cputime=69.014 memavail=1640724 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=220.6 pwm=0.000
Stats 1305.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=721860 bytes_read=492829 bytes_retransmit=9 bytes_invalid=0 send_seq=23775 receive_seq=23775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=59.5 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.5  sysload=0.18 cputime=69.058 memavail=1640480 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=220.9 pwm=0.000
Stats 1306.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=721978 bytes_read=493182 bytes_retransmit=9 bytes_invalid=0 send_seq=23784 receive_seq=23784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=59.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5  sysload=0.18 cputime=69.102 memavail=1640732 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=220.3 pwm=0.000
Stats 1307.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722115 bytes_read=493533 bytes_retransmit=9 bytes_invalid=0 send_seq=23794 receive_seq=23794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=59.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5  sysload=0.18 cputime=69.144 memavail=1641176 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=219.8 pwm=0.000
webhooks client 3041524792: Disconnected
Stats 1308.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722233 bytes_read=493865 bytes_retransmit=9 bytes_invalid=0 send_seq=23803 receive_seq=23803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=59.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.3  sysload=0.16 cputime=69.191 memavail=1640244 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=219.5 pwm=0.000
Stats 1309.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722374 bytes_read=494247 bytes_retransmit=9 bytes_invalid=0 send_seq=23813 receive_seq=23813 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=59.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4  sysload=0.16 cputime=69.224 memavail=1651876 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=218.9 pwm=0.000
Stats 1310.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722492 bytes_read=494593 bytes_retransmit=9 bytes_invalid=0 send_seq=23822 receive_seq=23822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.3  sysload=0.16 cputime=69.242 memavail=1653084 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=217.9 pwm=0.000
Stats 1311.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722629 bytes_read=494930 bytes_retransmit=9 bytes_invalid=0 send_seq=23832 receive_seq=23832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.4  sysload=0.16 cputime=69.264 memavail=1653084 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=217.4 pwm=0.000
Stats 1312.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722766 bytes_read=495297 bytes_retransmit=9 bytes_invalid=0 send_seq=23842 receive_seq=23842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=58.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.3  sysload=0.16 cputime=69.299 memavail=1653084 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=216.7 pwm=0.000
Stats 1313.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000012 bytes_write=722903 bytes_read=495648 bytes_retransmit=9 bytes_invalid=0 send_seq=23852 receive_seq=23852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=58.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1  sysload=0.15 cputime=69.328 memavail=1652372 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=215.6 pwm=0.000
Stats 1314.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=723021 bytes_read=495995 bytes_retransmit=9 bytes_invalid=0 send_seq=23861 receive_seq=23861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=58.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.1  sysload=0.15 cputime=69.360 memavail=1652640 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=215.0 pwm=0.000
Stats 1315.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=723158 bytes_read=496362 bytes_retransmit=9 bytes_invalid=0 send_seq=23871 receive_seq=23871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=58.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4  sysload=0.15 cputime=69.395 memavail=1652640 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=214.1 pwm=0.000
Stats 1316.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=723309 bytes_read=496713 bytes_retransmit=9 bytes_invalid=0 send_seq=23881 receive_seq=23881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=58.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.9  sysload=0.15 cputime=69.431 memavail=1652640 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=213.2 pwm=0.000
Stats 1317.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=723446 bytes_read=497050 bytes_retransmit=9 bytes_invalid=0 send_seq=23891 receive_seq=23891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=58.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.4  sysload=0.15 cputime=69.465 memavail=1652640 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=212.3 pwm=0.000
Stats 1318.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=723583 bytes_read=497417 bytes_retransmit=9 bytes_invalid=0 send_seq=23901 receive_seq=23901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.2  sysload=0.14 cputime=69.501 memavail=1652640 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=211.7 pwm=0.000
Stats 1319.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=723720 bytes_read=497783 bytes_retransmit=9 bytes_invalid=0 send_seq=23911 receive_seq=23911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.4  sysload=0.14 cputime=69.535 memavail=1652640 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=210.4 pwm=0.000
Stats 1320.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=723857 bytes_read=498120 bytes_retransmit=9 bytes_invalid=0 send_seq=23921 receive_seq=23921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1  sysload=0.14 cputime=69.570 memavail=1653036 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=209.5 pwm=0.000
Stats 1321.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=723998 bytes_read=498487 bytes_retransmit=9 bytes_invalid=0 send_seq=23931 receive_seq=23931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=58.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.2  sysload=0.14 cputime=69.606 memavail=1653156 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=208.5 pwm=0.000
Stats 1322.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=724135 bytes_read=498838 bytes_retransmit=9 bytes_invalid=0 send_seq=23941 receive_seq=23941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1  sysload=0.14 cputime=69.642 memavail=1653156 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=207.3 pwm=0.000
Stats 1323.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=724253 bytes_read=499170 bytes_retransmit=9 bytes_invalid=0 send_seq=23950 receive_seq=23950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=58.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.6  sysload=0.13 cputime=69.676 memavail=1653156 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=206.6 pwm=0.000
Stats 1324.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=724409 bytes_read=499557 bytes_retransmit=9 bytes_invalid=0 send_seq=23961 receive_seq=23961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=58.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.1  sysload=0.13 cputime=69.712 memavail=1653156 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=205.7 pwm=0.000
Stats 1325.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=724546 bytes_read=499908 bytes_retransmit=9 bytes_invalid=0 send_seq=23971 receive_seq=23971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=57.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.3  sysload=0.13 cputime=69.746 memavail=1653156 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=204.5 pwm=0.000
Stats 1326.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=724664 bytes_read=500240 bytes_retransmit=9 bytes_invalid=0 send_seq=23980 receive_seq=23980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=57.6 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.3  sysload=0.13 cputime=69.780 memavail=1651092 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=203.7 pwm=0.000
Stats 1327.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=724820 bytes_read=500612 bytes_retransmit=9 bytes_invalid=0 send_seq=23991 receive_seq=23991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=57.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1  sysload=0.13 cputime=69.800 memavail=1647772 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=202.7 pwm=0.000
Stats 1328.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=724976 bytes_read=500968 bytes_retransmit=9 bytes_invalid=0 send_seq=24002 receive_seq=24002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=57.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.0  sysload=0.20 cputime=69.821 memavail=1652456 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=201.5 pwm=0.000
Stats 1329.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=725094 bytes_read=501315 bytes_retransmit=9 bytes_invalid=0 send_seq=24011 receive_seq=24011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=57.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1  sysload=0.20 cputime=69.848 memavail=1648172 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=200.6 pwm=0.000
Stats 1330.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=725250 bytes_read=501687 bytes_retransmit=9 bytes_invalid=0 send_seq=24022 receive_seq=24022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=57.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.3  sysload=0.20 cputime=69.870 memavail=1635096 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=199.7 pwm=0.000
Stats 1331.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=725397 bytes_read=502054 bytes_retransmit=9 bytes_invalid=0 send_seq=24033 receive_seq=24033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=56.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.0  sysload=0.20 cputime=69.892 memavail=1622884 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=198.4 pwm=0.000
Stats 1332.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=725515 bytes_read=502386 bytes_retransmit=9 bytes_invalid=0 send_seq=24042 receive_seq=24042 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=56.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.2  sysload=0.20 cputime=69.914 memavail=1651228 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=197.5 pwm=0.000
Stats 1333.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=725671 bytes_read=502758 bytes_retransmit=9 bytes_invalid=0 send_seq=24053 receive_seq=24053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=56.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.0  sysload=0.42 cputime=69.936 memavail=1642060 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=196.7 pwm=0.000
Stats 1334.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=725808 bytes_read=503124 bytes_retransmit=9 bytes_invalid=0 send_seq=24063 receive_seq=24063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=56.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.1  sysload=0.42 cputime=69.958 memavail=1642140 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=195.5 pwm=0.000
Stats 1335.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=725926 bytes_read=503456 bytes_retransmit=9 bytes_invalid=0 send_seq=24072 receive_seq=24072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=56.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.3  sysload=0.42 cputime=69.985 memavail=1642212 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=194.4 pwm=0.000
Stats 1336.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=726082 bytes_read=503828 bytes_retransmit=9 bytes_invalid=0 send_seq=24083 receive_seq=24083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=56.7 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.1  sysload=0.42 cputime=70.008 memavail=1635756 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=193.6 pwm=0.000
Stats 1337.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=726200 bytes_read=504174 bytes_retransmit=9 bytes_invalid=0 send_seq=24092 receive_seq=24092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=56.7 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.2  sysload=0.42 cputime=70.031 memavail=1632756 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=192.7 pwm=0.000
Stats 1338.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=726337 bytes_read=504511 bytes_retransmit=9 bytes_invalid=0 send_seq=24102 receive_seq=24102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=56.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.5  sysload=0.63 cputime=70.049 memavail=1632764 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=191.6 pwm=0.000
Stats 1339.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=726493 bytes_read=504898 bytes_retransmit=9 bytes_invalid=0 send_seq=24113 receive_seq=24113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=56.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.2  sysload=0.63 cputime=70.086 memavail=1632756 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=190.8 pwm=0.000
Stats 1340.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=726611 bytes_read=505244 bytes_retransmit=9 bytes_invalid=0 send_seq=24122 receive_seq=24122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=56.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.2  sysload=0.63 cputime=70.123 memavail=1632756 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=189.5 pwm=0.000
Stats 1341.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=726748 bytes_read=505581 bytes_retransmit=9 bytes_invalid=0 send_seq=24132 receive_seq=24132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=56.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.2  sysload=0.63 cputime=70.149 memavail=1629348 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=188.8 pwm=0.000
Stats 1342.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=726922 bytes_read=505967 bytes_retransmit=9 bytes_invalid=0 send_seq=24143 receive_seq=24143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=56.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.3  sysload=0.63 cputime=70.172 memavail=1624756 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=187.5 pwm=0.000
Stats 1343.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=727040 bytes_read=506299 bytes_retransmit=9 bytes_invalid=0 send_seq=24152 receive_seq=24152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=56.3 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.1  sysload=0.66 cputime=70.192 memavail=1622096 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=186.7 pwm=0.000
Stats 1344.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=727196 bytes_read=506656 bytes_retransmit=9 bytes_invalid=0 send_seq=24163 receive_seq=24163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=56.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.1  sysload=0.66 cputime=70.212 memavail=1620496 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=185.8 pwm=0.000
Stats 1345.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=727314 bytes_read=507032 bytes_retransmit=9 bytes_invalid=0 send_seq=24172 receive_seq=24172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=56.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.2  sysload=0.66 cputime=70.232 memavail=1619056 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=184.7 pwm=0.000
Stats 1346.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=727451 bytes_read=507369 bytes_retransmit=9 bytes_invalid=0 send_seq=24182 receive_seq=24182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=56.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.0  sysload=0.66 cputime=70.256 memavail=1619628 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=183.9 pwm=0.000
Stats 1347.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=727588 bytes_read=507706 bytes_retransmit=9 bytes_invalid=0 send_seq=24192 receive_seq=24192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=55.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.8  sysload=0.66 cputime=70.277 memavail=1618584 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=182.9 pwm=0.000
Stats 1348.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=727725 bytes_read=508087 bytes_retransmit=9 bytes_invalid=0 send_seq=24202 receive_seq=24202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=55.9 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=38.9  sysload=0.69 cputime=70.300 memavail=1618592 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=181.8 pwm=0.000
Stats 1349.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=727862 bytes_read=508439 bytes_retransmit=9 bytes_invalid=0 send_seq=24212 receive_seq=24212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=55.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.8  sysload=0.69 cputime=70.321 memavail=1617452 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=180.9 pwm=0.000
Stats 1350.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=727999 bytes_read=508776 bytes_retransmit=9 bytes_invalid=0 send_seq=24222 receive_seq=24222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=55.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.8  sysload=0.69 cputime=70.343 memavail=1617296 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=180.1 pwm=0.000
Stats 1351.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=728136 bytes_read=509157 bytes_retransmit=9 bytes_invalid=0 send_seq=24232 receive_seq=24232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=55.7 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.4  sysload=0.69 cputime=70.366 memavail=1617272 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=179.0 pwm=0.000
Stats 1352.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=728277 bytes_read=509494 bytes_retransmit=9 bytes_invalid=0 send_seq=24242 receive_seq=24242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=55.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.1  sysload=0.69 cputime=70.387 memavail=1641116 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=178.1 pwm=0.000
Stats 1353.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=728428 bytes_read=509831 bytes_retransmit=9 bytes_invalid=0 send_seq=24252 receive_seq=24252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=55.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.1  sysload=0.71 cputime=70.406 memavail=1631860 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=177.3 pwm=0.000
Stats 1354.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=728565 bytes_read=510227 bytes_retransmit=9 bytes_invalid=0 send_seq=24262 receive_seq=24262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=55.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.0  sysload=0.71 cputime=70.434 memavail=1631584 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=176.2 pwm=0.000
Stats 1355.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=728702 bytes_read=510564 bytes_retransmit=9 bytes_invalid=0 send_seq=24272 receive_seq=24272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=39.1  sysload=0.71 cputime=70.453 memavail=1628628 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=175.4 pwm=0.000
Stats 1356.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=728839 bytes_read=510901 bytes_retransmit=9 bytes_invalid=0 send_seq=24282 receive_seq=24282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=55.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.0  sysload=0.71 cputime=70.473 memavail=1626968 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=174.6 pwm=0.000
Stats 1357.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=728976 bytes_read=511282 bytes_retransmit=9 bytes_invalid=0 send_seq=24292 receive_seq=24292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=38.9  sysload=0.71 cputime=70.494 memavail=1624720 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=173.6 pwm=0.000
Stats 1358.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=729094 bytes_read=511614 bytes_retransmit=9 bytes_invalid=0 send_seq=24301 receive_seq=24301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=38.6  sysload=0.81 cputime=70.515 memavail=1623144 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=172.7 pwm=0.000
Stats 1359.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=729231 bytes_read=511981 bytes_retransmit=9 bytes_invalid=0 send_seq=24311 receive_seq=24311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.8  sysload=0.81 cputime=70.535 memavail=1621160 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=172.0 pwm=0.000
Stats 1360.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=729368 bytes_read=512347 bytes_retransmit=9 bytes_invalid=0 send_seq=24321 receive_seq=24321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.2  sysload=0.81 cputime=70.554 memavail=1621240 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=171.0 pwm=0.000
Stats 1361.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=729505 bytes_read=512684 bytes_retransmit=9 bytes_invalid=0 send_seq=24331 receive_seq=24331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.0  sysload=0.81 cputime=70.575 memavail=1620864 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=170.2 pwm=0.000
Stats 1362.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=729642 bytes_read=513032 bytes_retransmit=9 bytes_invalid=0 send_seq=24341 receive_seq=24341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.9  sysload=0.81 cputime=70.593 memavail=1621316 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=169.3 pwm=0.000
Stats 1363.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=729783 bytes_read=513386 bytes_retransmit=9 bytes_invalid=0 send_seq=24351 receive_seq=24351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=0 temp=54.7 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=39.1  sysload=0.83 cputime=70.613 memavail=1621596 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=168.4 pwm=0.000
Stats 1364.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=729920 bytes_read=513728 bytes_retransmit=9 bytes_invalid=0 send_seq=24361 receive_seq=24361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996415 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.2  sysload=0.83 cputime=70.635 memavail=1621452 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=167.5 pwm=0.000
Stats 1365.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=730057 bytes_read=514069 bytes_retransmit=9 bytes_invalid=0 send_seq=24371 receive_seq=24371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.0  sysload=0.83 cputime=70.658 memavail=1621228 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=166.8 pwm=0.000
Stats 1366.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=730194 bytes_read=514431 bytes_retransmit=9 bytes_invalid=0 send_seq=24381 receive_seq=24381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.2  sysload=0.83 cputime=70.683 memavail=1650028 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=165.7 pwm=0.000
Stats 1367.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=730331 bytes_read=514768 bytes_retransmit=9 bytes_invalid=0 send_seq=24391 receive_seq=24391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.9  sysload=0.83 cputime=70.707 memavail=1633924 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=165.0 pwm=0.000
Stats 1368.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=730468 bytes_read=515120 bytes_retransmit=9 bytes_invalid=0 send_seq=24401 receive_seq=24401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.3  sysload=1.08 cputime=70.730 memavail=1637004 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=164.3 pwm=0.000
Stats 1369.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=730600 bytes_read=515496 bytes_retransmit=9 bytes_invalid=0 send_seq=24410 receive_seq=24410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=54.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.8  sysload=1.08 cputime=70.758 memavail=1635780 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=163.3 pwm=0.000
webhooks client 3042282272: New connection
webhooks client 3042282272: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3042282272
webhooks: registering remote method 'reboot_machine' for connection id: 3042282272
webhooks: registering remote method 'pause_job_queue' for connection id: 3042282272
webhooks: registering remote method 'start_job_queue' for connection id: 3042282272
Stats 1370.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=730737 bytes_read=515833 bytes_retransmit=9 bytes_invalid=0 send_seq=24420 receive_seq=24420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=0 temp=54.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.1  sysload=1.08 cputime=70.794 memavail=1636720 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=162.5 pwm=0.000
Stats 1371.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=730874 bytes_read=516185 bytes_retransmit=9 bytes_invalid=0 send_seq=24430 receive_seq=24430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=0 temp=54.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.8  sysload=1.08 cputime=70.828 memavail=1636624 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=161.8 pwm=0.000
Stats 1372.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=730992 bytes_read=516546 bytes_retransmit=9 bytes_invalid=0 send_seq=24439 receive_seq=24439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.0  sysload=1.08 cputime=70.867 memavail=1636128 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=160.8 pwm=0.000
Stats 1373.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=731129 bytes_read=516883 bytes_retransmit=9 bytes_invalid=0 send_seq=24449 receive_seq=24449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.8  sysload=1.00 cputime=70.909 memavail=1635624 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=160.1 pwm=0.000
Stats 1374.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=731266 bytes_read=517250 bytes_retransmit=9 bytes_invalid=0 send_seq=24459 receive_seq=24459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.4  sysload=1.00 cputime=70.950 memavail=1635848 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=159.3 pwm=0.000
Stats 1375.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=731407 bytes_read=517616 bytes_retransmit=9 bytes_invalid=0 send_seq=24469 receive_seq=24469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.9  sysload=1.00 cputime=70.990 memavail=1635680 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=158.5 pwm=0.000
Stats 1376.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=731525 bytes_read=517948 bytes_retransmit=9 bytes_invalid=0 send_seq=24478 receive_seq=24478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=39.1  sysload=1.00 cputime=71.028 memavail=1635676 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=157.8 pwm=0.000
Stats 1377.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=731662 bytes_read=518300 bytes_retransmit=9 bytes_invalid=0 send_seq=24488 receive_seq=24488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=53.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.8  sysload=1.00 cputime=71.068 memavail=1635872 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=157.1 pwm=0.000
Stats 1378.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=731799 bytes_read=518666 bytes_retransmit=9 bytes_invalid=0 send_seq=24498 receive_seq=24498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=53.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.3  sysload=0.92 cputime=71.106 memavail=1635792 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=156.2 pwm=0.000
Stats 1379.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=731936 bytes_read=519018 bytes_retransmit=9 bytes_invalid=0 send_seq=24508 receive_seq=24508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.1  sysload=0.92 cputime=71.130 memavail=1635344 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=155.6 pwm=0.000
Stats 1380.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=732106 bytes_read=519375 bytes_retransmit=9 bytes_invalid=0 send_seq=24519 receive_seq=24519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=53.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.9  sysload=0.92 cputime=71.171 memavail=1635344 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=154.8 pwm=0.000
Stats 1381.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=732243 bytes_read=519741 bytes_retransmit=9 bytes_invalid=0 send_seq=24529 receive_seq=24529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=53.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.1  sysload=0.92 cputime=71.213 memavail=1635416 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=154.0 pwm=0.000
Stats 1382.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=732380 bytes_read=520078 bytes_retransmit=9 bytes_invalid=0 send_seq=24539 receive_seq=24539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=0 temp=52.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.4  sysload=0.92 cputime=71.246 memavail=1634980 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=153.4 pwm=0.000
Stats 1383.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=732517 bytes_read=520430 bytes_retransmit=9 bytes_invalid=0 send_seq=24549 receive_seq=24549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=52.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.0  sysload=0.84 cputime=71.279 memavail=1635484 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=152.6 pwm=0.000
Stats 1384.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=732654 bytes_read=520811 bytes_retransmit=9 bytes_invalid=0 send_seq=24559 receive_seq=24559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=52.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.8  sysload=0.84 cputime=71.318 memavail=1635744 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=151.7 pwm=0.000
Stats 1385.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=732772 bytes_read=521143 bytes_retransmit=9 bytes_invalid=0 send_seq=24568 receive_seq=24568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=52.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.2  sysload=0.84 cputime=71.368 memavail=1635764 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=151.1 pwm=0.000
Stats 1386.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=732909 bytes_read=521495 bytes_retransmit=9 bytes_invalid=0 send_seq=24578 receive_seq=24578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=0 temp=52.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.4  sysload=0.84 cputime=71.413 memavail=1635784 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=150.3 pwm=0.000
Stats 1387.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=733046 bytes_read=521861 bytes_retransmit=9 bytes_invalid=0 send_seq=24588 receive_seq=24588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=52.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.6  sysload=0.84 cputime=71.455 memavail=1636036 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=149.5 pwm=0.000
Stats 1388.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=733183 bytes_read=522198 bytes_retransmit=9 bytes_invalid=0 send_seq=24598 receive_seq=24598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=52.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.0  sysload=0.78 cputime=71.500 memavail=1636040 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=148.9 pwm=0.000
Stats 1389.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=733324 bytes_read=522565 bytes_retransmit=9 bytes_invalid=0 send_seq=24608 receive_seq=24608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=0 temp=52.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.2  sysload=0.78 cputime=71.531 memavail=1635848 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=148.2 pwm=0.000
Stats 1390.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=733461 bytes_read=522931 bytes_retransmit=9 bytes_invalid=0 send_seq=24618 receive_seq=24618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=52.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.9  sysload=0.78 cputime=71.580 memavail=1635852 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=147.4 pwm=0.000
Stats 1391.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=733598 bytes_read=523268 bytes_retransmit=9 bytes_invalid=0 send_seq=24628 receive_seq=24628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.2  sysload=0.78 cputime=71.627 memavail=1635536 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=146.7 pwm=0.000
Stats 1392.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=733716 bytes_read=523615 bytes_retransmit=9 bytes_invalid=0 send_seq=24637 receive_seq=24637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.4  sysload=0.78 cputime=71.669 memavail=1627108 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=146.0 pwm=0.000
Stats 1393.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=733859 bytes_read=523997 bytes_retransmit=9 bytes_invalid=0 send_seq=24648 receive_seq=24648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=52.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.9  sysload=0.71 cputime=71.702 memavail=1634500 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=145.3 pwm=0.000
Stats 1394.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=733996 bytes_read=524349 bytes_retransmit=9 bytes_invalid=0 send_seq=24658 receive_seq=24658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=52.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.9  sysload=0.71 cputime=71.738 memavail=1634560 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=144.7 pwm=0.000
Stats 1395.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=734114 bytes_read=524696 bytes_retransmit=9 bytes_invalid=0 send_seq=24667 receive_seq=24667 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.7  sysload=0.71 cputime=71.772 memavail=1635184 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=144.0 pwm=0.000
Stats 1396.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=734251 bytes_read=525062 bytes_retransmit=9 bytes_invalid=0 send_seq=24677 receive_seq=24677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.3  sysload=0.71 cputime=71.798 memavail=1634380 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=143.2 pwm=0.000
Stats 1397.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=734388 bytes_read=525399 bytes_retransmit=9 bytes_invalid=0 send_seq=24687 receive_seq=24687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.6  sysload=0.71 cputime=71.843 memavail=1634980 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=142.6 pwm=0.000
Stats 1398.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=734525 bytes_read=525751 bytes_retransmit=9 bytes_invalid=0 send_seq=24697 receive_seq=24697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=51.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.2  sysload=0.66 cputime=71.877 memavail=1635176 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=142.0 pwm=0.000
Stats 1399.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=734643 bytes_read=526127 bytes_retransmit=9 bytes_invalid=0 send_seq=24706 receive_seq=24706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=51.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=38.6  sysload=0.66 cputime=71.913 memavail=1635992 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=141.2 pwm=0.000
Stats 1400.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=734780 bytes_read=526464 bytes_retransmit=9 bytes_invalid=0 send_seq=24716 receive_seq=24716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=51.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.7  sysload=0.66 cputime=71.957 memavail=1635992 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=140.6 pwm=0.000
Stats 1401.2: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=734917 bytes_read=526831 bytes_retransmit=9 bytes_invalid=0 send_seq=24726 receive_seq=24726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=51.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.6  sysload=0.66 cputime=72.003 memavail=1635992 print_time=1304.661 buffer_time=0.000 print_stall=18 extruder: target=0 temp=140.1 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-218-gf8afe49a'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 09:41:09 2021 (1640940069.5 1438.8)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041533824: New connection
webhooks client 3041533824: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
mcu 'mcu': got {'#receive_time': 1439.975774086, u'next_clock': 1267504896, u'oid': 26, u'value': 14772, '#name': u'analog_in_state', '#sent_time': 1439.929175678}
mcu 'mcu': got {'#receive_time': 1440.185743308, u'next_clock': 1282624896, u'oid': 17, u'value': 28964, '#name': u'analog_in_state', '#sent_time': 1440.184343086}
mcu 'mcu': got {'#receive_time': 1440.21577616, u'next_clock': 1284784896, u'oid': 20, u'value': 13624, '#name': u'analog_in_state', '#sent_time': 1440.184343086}
mcu 'mcu': got {'#receive_time': 1440.275776974, u'next_clock': 1289104896, u'oid': 26, u'value': 14807, '#name': u'analog_in_state', '#sent_time': 1440.235700919}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3041533824
webhooks: registering remote method 'reboot_machine' for connection id: 3041533824
webhooks: registering remote method 'pause_job_queue' for connection id: 3041533824
webhooks: registering remote method 'start_job_queue' for connection id: 3041533824
Stats 1441.7: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7379 bytes_read=5955 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71997514 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=38.4  sysload=1.65 cputime=1.568 memavail=1629312 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.2 pwm=0.000
Stats 1442.7: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7420 bytes_read=6111 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996931 heater_bed: target=0 temp=48.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.2  sysload=1.65 cputime=1.587 memavail=1628996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.7 pwm=0.000
Stats 1443.7: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7426 bytes_read=6292 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996918 heater_bed: target=0 temp=48.3 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=38.6  sysload=1.52 cputime=1.614 memavail=1629164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.3 pwm=0.000
Stats 1444.7: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7456 bytes_read=6468 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996721 heater_bed: target=0 temp=48.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=38.3  sysload=1.52 cputime=1.647 memavail=1629268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.5 pwm=0.000
Stats 1445.7: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000059 mcu_task_stddev=0.000146 bytes_write=7462 bytes_read=6636 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996679 heater_bed: target=0 temp=48.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.4  sysload=1.52 cputime=1.676 memavail=1629264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.3 pwm=0.000
Stats 1446.7: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000059 mcu_task_stddev=0.000146 bytes_write=7492 bytes_read=6827 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996683 heater_bed: target=0 temp=48.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=38.1  sysload=1.52 cputime=1.708 memavail=1629264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.8 pwm=0.000
Stats 1447.7: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000059 mcu_task_stddev=0.000146 bytes_write=7498 bytes_read=6993 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996619 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.3  sysload=1.52 cputime=1.739 memavail=1629560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.2 pwm=0.000
Stats 1448.7: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000059 mcu_task_stddev=0.000146 bytes_write=7528 bytes_read=7154 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996581 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.3  sysload=1.39 cputime=1.767 memavail=1629636 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.8 pwm=0.000
Stats 1449.7: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000059 mcu_task_stddev=0.000146 bytes_write=7534 bytes_read=7335 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996571 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=38.1  sysload=1.39 cputime=1.790 memavail=1629316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.4 pwm=0.000
Stats 1450.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7564 bytes_read=7525 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996520 heater_bed: target=0 temp=47.8 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.4  sysload=1.39 cputime=1.817 memavail=1629064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.7 pwm=0.000
Stats 1451.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7570 bytes_read=7676 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996529 heater_bed: target=0 temp=47.7 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.7  sysload=1.39 cputime=1.841 memavail=1629584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.2 pwm=0.000
Stats 1452.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7600 bytes_read=7867 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996535 heater_bed: target=0 temp=47.7 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.1  sysload=1.39 cputime=1.873 memavail=1629316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.9 pwm=0.000
Stats 1453.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7606 bytes_read=8033 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=38.2  sysload=1.28 cputime=1.903 memavail=1629316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.3 pwm=0.000
Stats 1454.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7612 bytes_read=8184 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=47.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=38.0  sysload=1.28 cputime=1.933 memavail=1629656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.2 pwm=0.000
Stats 1455.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7642 bytes_read=8389 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=37.9  sysload=1.28 cputime=1.962 memavail=1629816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.2 pwm=0.000
Stats 1456.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7648 bytes_read=8555 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996556 heater_bed: target=0 temp=47.5 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=37.7  sysload=1.28 cputime=1.985 memavail=1629588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.2 pwm=0.000
Stats 1457.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7678 bytes_read=8716 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=0 temp=47.4 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.8  sysload=1.28 cputime=2.017 memavail=1629612 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.5 pwm=0.000
Stats 1458.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7712 bytes_read=8907 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996536 heater_bed: target=0 temp=47.4 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.8  sysload=1.18 cputime=2.046 memavail=1630024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.1 pwm=0.000
Stats 1459.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7742 bytes_read=9083 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996513 heater_bed: target=0 temp=47.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.0  sysload=1.18 cputime=2.071 memavail=1630284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.5 pwm=0.000
Stats 1460.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7748 bytes_read=9248 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996507 heater_bed: target=0 temp=47.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.8  sysload=1.18 cputime=2.101 memavail=1630036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.1 pwm=0.000
Stats 1461.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7778 bytes_read=9439 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996494 heater_bed: target=0 temp=47.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=37.8  sysload=1.18 cputime=2.132 memavail=1629736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.6 pwm=0.000
Stats 1462.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7784 bytes_read=9605 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996494 heater_bed: target=0 temp=47.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=38.1  sysload=1.18 cputime=2.163 memavail=1630076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.9 pwm=0.000
Stats 1463.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7814 bytes_read=9766 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=0 temp=47.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.7  sysload=1.25 cputime=2.194 memavail=1629768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.7 pwm=0.000
Stats 1464.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7820 bytes_read=9947 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=0 temp=47.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.7  sysload=1.25 cputime=2.223 memavail=1629804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.3 pwm=0.000
Stats 1465.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7850 bytes_read=10137 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=37.6  sysload=1.25 cputime=2.253 memavail=1629712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.7 pwm=0.000
Stats 1466.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7856 bytes_read=10288 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.8  sysload=1.25 cputime=2.282 memavail=1629924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.4 pwm=0.000
Stats 1467.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7886 bytes_read=10479 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.7  sysload=1.25 cputime=2.311 memavail=1629964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.0 pwm=0.000
Stats 1468.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7892 bytes_read=10645 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.5  sysload=1.23 cputime=2.336 memavail=1629972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.4 pwm=0.000
Stats 1469.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=7922 bytes_read=10806 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.9  sysload=1.23 cputime=2.366 memavail=1629880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.0 pwm=0.000
Stats 1470.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7928 bytes_read=11001 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.0  sysload=1.23 cputime=2.397 memavail=1629988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.5 pwm=0.000
Stats 1471.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7934 bytes_read=11167 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.5  sysload=1.23 cputime=2.426 memavail=1630148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.1 pwm=0.000
Stats 1472.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7964 bytes_read=11328 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.6  sysload=1.23 cputime=2.455 memavail=1629936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.7 pwm=0.000
Stats 1473.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=7970 bytes_read=11509 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.2  sysload=1.13 cputime=2.485 memavail=1629772 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.5 pwm=0.000
Stats 1474.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8000 bytes_read=11685 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.4  sysload=1.13 cputime=2.517 memavail=1629680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.9 pwm=0.000
Stats 1475.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8006 bytes_read=11850 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.3  sysload=1.13 cputime=2.549 memavail=1629632 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.4 pwm=0.000
Stats 1476.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8012 bytes_read=12031 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.0  sysload=1.13 cputime=2.580 memavail=1629620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000
Stats 1477.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8042 bytes_read=12207 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=0 temp=46.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.1  sysload=1.13 cputime=2.611 memavail=1629632 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.6 pwm=0.000
Stats 1478.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8048 bytes_read=12358 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.1  sysload=1.04 cputime=2.637 memavail=1629872 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.4 pwm=0.000
Stats 1479.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8082 bytes_read=12549 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=46.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.3  sysload=1.04 cputime=2.662 memavail=1629644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.8 pwm=0.000
Stats 1480.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8112 bytes_read=12740 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=0 temp=46.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.2  sysload=1.04 cputime=2.693 memavail=1629384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.3 pwm=0.000
Stats 1481.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8142 bytes_read=12896 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=0 temp=46.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=36.2  sysload=1.04 cputime=2.724 memavail=1629104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.9 pwm=0.000
Stats 1482.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8148 bytes_read=13065 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=0 temp=45.5 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=36.7  sysload=1.04 cputime=2.756 memavail=1629420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000
Stats 1483.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8160 bytes_read=13235 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=46.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=37.2  sysload=0.95 cputime=2.787 memavail=1629752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.1 pwm=0.000
Stats 1484.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8190 bytes_read=13386 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=45.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=36.7  sysload=0.95 cputime=2.818 memavail=1629972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.7 pwm=0.000
Stats 1485.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8196 bytes_read=13593 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=45.8 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.1  sysload=0.95 cputime=2.849 memavail=1630052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.2 pwm=0.000
Stats 1486.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8221 bytes_read=13749 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=0 temp=45.5 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=37.0  sysload=0.95 cputime=2.879 memavail=1629712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.8 pwm=0.000
Stats 1487.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8251 bytes_read=13910 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=0 temp=45.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=36.4  sysload=0.95 cputime=2.910 memavail=1629708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.5 pwm=0.000
Stats 1488.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8257 bytes_read=14106 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=45.4 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=36.8  sysload=0.88 cputime=2.939 memavail=1630104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.2 pwm=0.000
Stats 1489.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=8282 bytes_read=14262 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=0 temp=45.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=36.6  sysload=0.88 cputime=2.968 memavail=1630244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.6 pwm=0.000
Stats 1490.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8288 bytes_read=14428 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=0 temp=44.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=36.7  sysload=0.88 cputime=2.998 memavail=1629928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.2 pwm=0.000
Stats 1491.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8313 bytes_read=14629 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=45.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=36.4  sysload=0.88 cputime=3.029 memavail=1630288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000
Stats 1492.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8319 bytes_read=14780 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=36.6  sysload=0.88 cputime=3.058 memavail=1630276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.5 pwm=0.000
Stats 1493.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8325 bytes_read=14931 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=36.8  sysload=0.81 cputime=3.087 memavail=1630484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.1 pwm=0.000
Stats 1494.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8350 bytes_read=15132 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=44.6 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=36.6  sysload=0.81 cputime=3.115 memavail=1629860 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.6 pwm=0.000
Stats 1495.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8356 bytes_read=15297 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=44.6 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=36.8  sysload=0.81 cputime=3.143 memavail=1631316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.3 pwm=0.000
Starting SD card print (position 0)
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 220.000
Stats 1496.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8798 bytes_read=15498 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=60 temp=44.6 pwm=1.000 rpi: temp=57.9 mcu_temp: temp=36.5 sd_pos=848 sysload=0.81 cputime=3.177 memavail=1629852 print_time=1505.231 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.9 pwm=1.000
Stats 1497.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8830 bytes_read=15704 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=44.5 pwm=1.000 rpi: temp=57.5 mcu_temp: temp=36.1 sd_pos=848 sysload=0.81 cputime=3.213 memavail=1629600 print_time=1506.231 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.6 pwm=1.000
Stats 1498.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8860 bytes_read=15865 bytes_retransmit=9 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=44.6 pwm=1.000 rpi: temp=57.5 mcu_temp: temp=36.5 sd_pos=848 sysload=0.90 cputime=3.245 memavail=1629660 print_time=1507.232 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.3 pwm=1.000
Stats 1499.7: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8904 bytes_read=16041 bytes_retransmit=9 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=44.6 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.7 sd_pos=848 sysload=0.90 cputime=3.277 memavail=1629556 print_time=1508.233 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.1 pwm=1.000
Stats 1500.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8961 bytes_read=16252 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=44.8 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=36.0 sd_pos=848 sysload=0.90 cputime=3.311 memavail=1629644 print_time=1509.233 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.3 pwm=1.000
Stats 1501.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=8991 bytes_read=16413 bytes_retransmit=9 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=60 temp=45.5 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.9 sd_pos=848 sysload=0.90 cputime=3.347 memavail=1629864 print_time=1510.233 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.5 pwm=1.000
Stats 1502.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=9035 bytes_read=16589 bytes_retransmit=9 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=45.4 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.5 sd_pos=848 sysload=0.90 cputime=3.384 memavail=1629620 print_time=1511.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.9 pwm=1.000
Stats 1503.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=9060 bytes_read=16775 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=60 temp=46.0 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=36.4 sd_pos=848 sysload=0.91 cputime=3.421 memavail=1629836 print_time=1512.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=92.8 pwm=1.000
Stats 1504.7: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000085 bytes_write=9155 bytes_read=16951 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=60 temp=46.5 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.9 sd_pos=848 sysload=0.91 cputime=3.458 memavail=1629940 print_time=1513.235 buffer_time=0.000 print_stall=0 extruder: target=220 temp=93.6 pwm=1.000
Stats 1505.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=9199 bytes_read=17142 bytes_retransmit=9 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=46.7 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=36.3 sd_pos=848 sysload=0.91 cputime=3.495 memavail=1629688 print_time=1514.235 buffer_time=0.000 print_stall=0 extruder: target=220 temp=94.6 pwm=1.000
Stats 1506.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=9267 bytes_read=17343 bytes_retransmit=9 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=60 temp=46.8 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.6 sd_pos=848 sysload=0.91 cputime=3.532 memavail=1629888 print_time=1515.236 buffer_time=0.000 print_stall=0 extruder: target=220 temp=96.2 pwm=1.000
Stats 1507.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=9311 bytes_read=17504 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=46.9 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=35.8 sd_pos=848 sysload=0.91 cputime=3.567 memavail=1629888 print_time=1516.236 buffer_time=0.000 print_stall=0 extruder: target=220 temp=97.4 pwm=1.000
Stats 1508.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=9355 bytes_read=17680 bytes_retransmit=9 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996453 heater_bed: target=60 temp=47.0 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.9 sd_pos=848 sysload=0.84 cputime=3.603 memavail=1629316 print_time=1517.237 buffer_time=0.000 print_stall=0 extruder: target=220 temp=98.8 pwm=1.000
Stats 1509.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=9455 bytes_read=17891 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=47.4 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.9 sd_pos=848 sysload=0.84 cputime=3.638 memavail=1629580 print_time=1518.238 buffer_time=0.000 print_stall=0 extruder: target=220 temp=100.9 pwm=1.000
Stats 1510.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=9508 bytes_read=18057 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=47.5 pwm=1.000 rpi: temp=57.5 mcu_temp: temp=35.3 sd_pos=848 sysload=0.84 cputime=3.674 memavail=1629588 print_time=1519.238 buffer_time=0.000 print_stall=0 extruder: target=220 temp=102.5 pwm=1.000
Stats 1511.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=9579 bytes_read=18253 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=47.8 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.6 sd_pos=848 sysload=0.84 cputime=3.713 memavail=1629332 print_time=1520.239 buffer_time=0.000 print_stall=0 extruder: target=220 temp=104.1 pwm=1.000
Stats 1512.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=9647 bytes_read=18454 bytes_retransmit=9 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=48.1 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.4 sd_pos=848 sysload=0.84 cputime=3.751 memavail=1629332 print_time=1521.239 buffer_time=0.000 print_stall=0 extruder: target=220 temp=106.5 pwm=1.000
Stats 1513.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=9747 bytes_read=18635 bytes_retransmit=9 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=48.2 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=35.6 sd_pos=848 sysload=0.77 cputime=3.788 memavail=1629104 print_time=1522.240 buffer_time=0.000 print_stall=0 extruder: target=220 temp=108.3 pwm=1.000
Stats 1514.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=9815 bytes_read=18821 bytes_retransmit=9 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=48.5 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.7 sd_pos=848 sysload=0.77 cputime=3.825 memavail=1629336 print_time=1523.240 buffer_time=0.000 print_stall=0 extruder: target=220 temp=110.2 pwm=1.000
Stats 1515.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=9887 bytes_read=19022 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=48.7 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.3 sd_pos=848 sysload=0.77 cputime=3.863 memavail=1629356 print_time=1524.241 buffer_time=0.000 print_stall=0 extruder: target=220 temp=112.6 pwm=1.000
Stats 1516.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=9969 bytes_read=19208 bytes_retransmit=9 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=49.0 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.4 sd_pos=848 sysload=0.77 cputime=3.900 memavail=1629336 print_time=1525.241 buffer_time=0.000 print_stall=0 extruder: target=220 temp=114.5 pwm=1.000
Stats 1517.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=10085 bytes_read=19409 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=49.5 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.3 sd_pos=848 sysload=0.77 cputime=3.938 memavail=1629348 print_time=1526.242 buffer_time=0.000 print_stall=0 extruder: target=220 temp=116.4 pwm=1.000
Stats 1518.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=10148 bytes_read=19605 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=60 temp=49.8 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.5 sd_pos=848 sysload=0.71 cputime=3.973 memavail=1629524 print_time=1527.243 buffer_time=0.000 print_stall=0 extruder: target=220 temp=119.0 pwm=1.000
Stats 1519.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=10234 bytes_read=19776 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=60 temp=50.0 pwm=1.000 rpi: temp=57.5 mcu_temp: temp=35.6 sd_pos=848 sysload=0.71 cputime=3.999 memavail=1629296 print_time=1528.243 buffer_time=0.000 print_stall=0 extruder: target=220 temp=120.9 pwm=1.000
Stats 1520.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=10333 bytes_read=19967 bytes_retransmit=9 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=60 temp=50.5 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.2 sd_pos=848 sysload=0.71 cputime=4.037 memavail=1629312 print_time=1529.244 buffer_time=0.000 print_stall=0 extruder: target=220 temp=122.8 pwm=1.000
Stats 1521.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10393 bytes_read=20178 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=50.7 pwm=1.000 rpi: temp=57.9 mcu_temp: temp=35.4 sd_pos=848 sysload=0.71 cputime=4.073 memavail=1629300 print_time=1530.245 buffer_time=0.000 print_stall=0 extruder: target=220 temp=125.4 pwm=1.000
Stats 1522.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10469 bytes_read=20349 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=50.9 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=34.9 sd_pos=848 sysload=0.71 cputime=4.109 memavail=1629280 print_time=1531.245 buffer_time=0.000 print_stall=0 extruder: target=220 temp=127.3 pwm=1.000
Stats 1523.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10537 bytes_read=20533 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=51.1 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=34.7 sd_pos=848 sysload=0.65 cputime=4.144 memavail=1629000 print_time=1532.245 buffer_time=0.000 print_stall=0 extruder: target=220 temp=129.3 pwm=1.000
Stats 1524.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10621 bytes_read=20735 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=51.4 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=34.9 sd_pos=848 sysload=0.65 cputime=4.181 memavail=1629176 print_time=1533.245 buffer_time=0.000 print_stall=0 extruder: target=220 temp=131.9 pwm=1.000
Stats 1525.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10709 bytes_read=20908 bytes_retransmit=9 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=51.7 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=34.8 sd_pos=848 sysload=0.65 cputime=4.218 memavail=1629416 print_time=1534.246 buffer_time=0.000 print_stall=0 extruder: target=220 temp=133.8 pwm=1.000
Stats 1526.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10791 bytes_read=21106 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=52.0 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=35.2 sd_pos=848 sysload=0.65 cputime=4.255 memavail=1629168 print_time=1535.246 buffer_time=0.000 print_stall=0 extruder: target=220 temp=135.8 pwm=1.000
Stats 1527.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10835 bytes_read=21293 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=52.0 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=34.5 sd_pos=848 sysload=0.65 cputime=4.290 memavail=1629196 print_time=1536.248 buffer_time=0.000 print_stall=0 extruder: target=220 temp=138.4 pwm=1.000
Stats 1528.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10898 bytes_read=21456 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=52.4 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=34.9 sd_pos=848 sysload=0.60 cputime=4.324 memavail=1629392 print_time=1537.251 buffer_time=0.000 print_stall=0 extruder: target=220 temp=140.3 pwm=1.000
Stats 1529.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=10997 bytes_read=21644 bytes_retransmit=9 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=60 temp=52.7 pwm=0.916 rpi: temp=56.5 mcu_temp: temp=34.7 sd_pos=848 sysload=0.60 cputime=4.349 memavail=1629208 print_time=1538.248 buffer_time=0.000 print_stall=0 extruder: target=220 temp=142.2 pwm=1.000
Stats 1530.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=11135 bytes_read=21856 bytes_retransmit=9 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=60 temp=53.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.7 sd_pos=848 sysload=0.60 cputime=4.388 memavail=1629240 print_time=1539.249 buffer_time=0.000 print_stall=0 extruder: target=220 temp=144.7 pwm=1.000
Stats 1531.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=11230 bytes_read=22044 bytes_retransmit=9 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=60 temp=53.4 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=34.6 sd_pos=848 sysload=0.60 cputime=4.427 memavail=1629412 print_time=1540.249 buffer_time=0.000 print_stall=0 extruder: target=220 temp=146.6 pwm=1.000
Stats 1532.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=11348 bytes_read=22237 bytes_retransmit=9 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=53.8 pwm=1.000 rpi: temp=57.0 mcu_temp: temp=35.1 sd_pos=848 sysload=0.60 cputime=4.465 memavail=1629444 print_time=1541.250 buffer_time=0.000 print_stall=0 extruder: target=220 temp=148.5 pwm=1.000
Stats 1533.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=11432 bytes_read=22439 bytes_retransmit=9 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=53.9 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=34.8 sd_pos=848 sysload=0.55 cputime=4.504 memavail=1629132 print_time=1542.251 buffer_time=0.000 print_stall=0 extruder: target=220 temp=151.0 pwm=1.000
Stats 1534.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=11515 bytes_read=22607 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=54.0 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=34.7 sd_pos=848 sysload=0.55 cputime=4.540 memavail=1629128 print_time=1543.252 buffer_time=0.000 print_stall=0 extruder: target=220 temp=152.8 pwm=1.000
Stats 1535.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=11575 bytes_read=22785 bytes_retransmit=9 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=60 temp=54.3 pwm=0.907 rpi: temp=56.0 mcu_temp: temp=34.5 sd_pos=848 sysload=0.55 cputime=4.574 memavail=1629388 print_time=1544.253 buffer_time=0.000 print_stall=0 extruder: target=220 temp=154.7 pwm=1.000
Stats 1536.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=11681 bytes_read=23002 bytes_retransmit=9 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=54.5 pwm=0.735 rpi: temp=56.5 mcu_temp: temp=34.6 sd_pos=848 sysload=0.55 cputime=4.603 memavail=1629116 print_time=1545.254 buffer_time=0.000 print_stall=0 extruder: target=220 temp=157.1 pwm=1.000
Stats 1537.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=11765 bytes_read=23175 bytes_retransmit=9 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=54.6 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=34.7 sd_pos=848 sysload=0.55 cputime=4.639 memavail=1629084 print_time=1546.255 buffer_time=0.000 print_stall=0 extruder: target=220 temp=159.0 pwm=1.000
Stats 1538.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=11906 bytes_read=23388 bytes_retransmit=9 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996448 heater_bed: target=60 temp=54.9 pwm=0.805 rpi: temp=55.5 mcu_temp: temp=34.5 sd_pos=848 sysload=0.51 cputime=4.679 memavail=1629328 print_time=1547.255 buffer_time=0.000 print_stall=0 extruder: target=220 temp=160.8 pwm=1.000
Stats 1539.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=12037 bytes_read=23585 bytes_retransmit=9 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=55.1 pwm=0.984 rpi: temp=56.0 mcu_temp: temp=34.5 sd_pos=848 sysload=0.51 cputime=4.717 memavail=1629200 print_time=1548.256 buffer_time=0.000 print_stall=0 extruder: target=220 temp=163.2 pwm=1.000
Heater heater_bed within range of 60.000
Stats 1540.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=12137 bytes_read=23763 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=55.2 pwm=0.960 rpi: temp=56.5 mcu_temp: temp=34.4 sd_pos=848 sysload=0.51 cputime=4.754 memavail=1629196 print_time=1549.257 buffer_time=0.000 print_stall=0 extruder: target=220 temp=165.1 pwm=1.000
Stats 1541.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=12221 bytes_read=23969 bytes_retransmit=9 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=55.5 pwm=0.914 rpi: temp=56.0 mcu_temp: temp=34.2 sd_pos=848 sysload=0.51 cputime=4.791 memavail=1629140 print_time=1550.258 buffer_time=0.000 print_stall=0 extruder: target=220 temp=166.9 pwm=1.000
Stats 1542.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=12348 bytes_read=24155 bytes_retransmit=9 bytes_invalid=0 send_seq=651 receive_seq=651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=60 temp=55.8 pwm=0.446 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=848 sysload=0.51 cputime=4.828 memavail=1629112 print_time=1551.258 buffer_time=0.000 print_stall=0 extruder: target=220 temp=169.3 pwm=1.000
Stats 1543.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=12478 bytes_read=24328 bytes_retransmit=9 bytes_invalid=0 send_seq=659 receive_seq=659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=60 temp=55.9 pwm=0.889 rpi: temp=56.0 mcu_temp: temp=34.4 sd_pos=848 sysload=0.47 cputime=4.865 memavail=1629352 print_time=1552.258 buffer_time=0.000 print_stall=0 extruder: target=220 temp=171.1 pwm=1.000
Stats 1544.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=12609 bytes_read=24542 bytes_retransmit=9 bytes_invalid=0 send_seq=667 receive_seq=667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=60 temp=56.1 pwm=0.918 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=848 sysload=0.47 cputime=4.904 memavail=1629832 print_time=1553.260 buffer_time=0.000 print_stall=0 extruder: target=220 temp=172.9 pwm=1.000
Stats 1545.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000029 bytes_write=12720 bytes_read=24734 bytes_retransmit=9 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=60 temp=56.5 pwm=0.502 rpi: temp=56.0 mcu_temp: temp=34.2 sd_pos=848 sysload=0.47 cputime=4.941 memavail=1629856 print_time=1554.260 buffer_time=0.000 print_stall=0 extruder: target=220 temp=175.2 pwm=1.000
Stats 1546.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=12836 bytes_read=24932 bytes_retransmit=9 bytes_invalid=0 send_seq=682 receive_seq=682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=56.6 pwm=0.600 rpi: temp=55.5 mcu_temp: temp=34.3 sd_pos=848 sysload=0.47 cputime=4.977 memavail=1630088 print_time=1555.261 buffer_time=0.000 print_stall=0 extruder: target=220 temp=176.9 pwm=1.000
Stats 1547.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=12961 bytes_read=25140 bytes_retransmit=9 bytes_invalid=0 send_seq=689 receive_seq=689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=56.7 pwm=0.923 rpi: temp=55.5 mcu_temp: temp=34.3 sd_pos=848 sysload=0.47 cputime=5.017 memavail=1630228 print_time=1556.262 buffer_time=0.000 print_stall=0 extruder: target=220 temp=178.7 pwm=1.000
Stats 1548.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13072 bytes_read=25332 bytes_retransmit=9 bytes_invalid=0 send_seq=696 receive_seq=696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=56.8 pwm=0.939 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=848 sysload=0.43 cputime=5.055 memavail=1630428 print_time=1557.263 buffer_time=0.000 print_stall=0 extruder: target=220 temp=181.0 pwm=1.000
Stats 1549.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13176 bytes_read=25510 bytes_retransmit=9 bytes_invalid=0 send_seq=703 receive_seq=703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=56.8 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=34.4 sd_pos=848 sysload=0.43 cputime=5.092 memavail=1630540 print_time=1558.264 buffer_time=0.000 print_stall=0 extruder: target=220 temp=182.8 pwm=1.000
Stats 1550.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13236 bytes_read=25703 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=56.9 pwm=0.981 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=848 sysload=0.43 cputime=5.129 memavail=1630292 print_time=1559.265 buffer_time=0.000 print_stall=0 extruder: target=220 temp=184.4 pwm=1.000
Stats 1551.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13347 bytes_read=25905 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=57.4 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=34.1 sd_pos=848 sysload=0.43 cputime=5.166 memavail=1630288 print_time=1560.266 buffer_time=0.000 print_stall=0 extruder: target=220 temp=186.7 pwm=1.000
Stats 1552.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13426 bytes_read=26073 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=57.5 pwm=0.369 rpi: temp=55.0 mcu_temp: temp=34.1 sd_pos=848 sysload=0.43 cputime=5.201 memavail=1630352 print_time=1561.267 buffer_time=0.000 print_stall=0 extruder: target=220 temp=188.5 pwm=1.000
Stats 1553.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13509 bytes_read=26271 bytes_retransmit=9 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=57.9 pwm=0.096 rpi: temp=55.5 mcu_temp: temp=34.4 sd_pos=848 sysload=0.39 cputime=5.237 memavail=1630104 print_time=1562.267 buffer_time=0.000 print_stall=0 extruder: target=220 temp=190.0 pwm=1.000
Stats 1554.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13622 bytes_read=26463 bytes_retransmit=9 bytes_invalid=0 send_seq=730 receive_seq=730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=58.1 pwm=0.052 rpi: temp=55.5 mcu_temp: temp=34.4 sd_pos=848 sysload=0.39 cputime=5.274 memavail=1630104 print_time=1563.268 buffer_time=0.000 print_stall=0 extruder: target=220 temp=192.2 pwm=1.000
Stats 1555.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13738 bytes_read=26646 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=60 temp=58.1 pwm=0.580 rpi: temp=56.0 mcu_temp: temp=34.5 sd_pos=848 sysload=0.39 cputime=5.312 memavail=1630348 print_time=1564.269 buffer_time=0.000 print_stall=0 extruder: target=220 temp=193.9 pwm=1.000
Stats 1556.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=13957 bytes_read=26874 bytes_retransmit=9 bytes_invalid=0 send_seq=746 receive_seq=746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996448 heater_bed: target=60 temp=58.1 pwm=0.725 rpi: temp=55.0 mcu_temp: temp=34.2 sd_pos=848 sysload=0.39 cputime=5.352 memavail=1630416 print_time=1565.270 buffer_time=0.000 print_stall=0 extruder: target=220 temp=195.5 pwm=1.000
Stats 1557.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=14061 bytes_read=27071 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996446 heater_bed: target=60 temp=58.3 pwm=0.543 rpi: temp=56.5 mcu_temp: temp=33.9 sd_pos=848 sysload=0.39 cputime=5.387 memavail=1630160 print_time=1566.271 buffer_time=0.000 print_stall=0 extruder: target=220 temp=197.7 pwm=0.961
Stats 1558.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=14219 bytes_read=27264 bytes_retransmit=9 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=58.4 pwm=0.163 rpi: temp=56.0 mcu_temp: temp=34.0 sd_pos=848 sysload=0.36 cputime=5.413 memavail=1630348 print_time=1567.272 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.3 pwm=0.895
Stats 1559.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=14327 bytes_read=27472 bytes_retransmit=9 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996450 heater_bed: target=60 temp=58.4 pwm=0.762 rpi: temp=55.0 mcu_temp: temp=34.0 sd_pos=848 sysload=0.36 cputime=5.441 memavail=1630124 print_time=1568.273 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.0 pwm=0.790
Stats 1560.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=14494 bytes_read=27684 bytes_retransmit=9 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=60 temp=58.5 pwm=0.751 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=848 sysload=0.36 cputime=5.480 memavail=1629600 print_time=1569.273 buffer_time=0.000 print_stall=0 extruder: target=220 temp=202.9 pwm=0.792
Stats 1561.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=14672 bytes_read=27897 bytes_retransmit=9 bytes_invalid=0 send_seq=793 receive_seq=793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=60 temp=58.6 pwm=0.713 rpi: temp=56.0 mcu_temp: temp=34.0 sd_pos=848 sysload=0.36 cputime=5.518 memavail=1629852 print_time=1570.274 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.6 pwm=0.596
Stats 1562.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=14787 bytes_read=28105 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996456 heater_bed: target=60 temp=58.8 pwm=0.497 rpi: temp=55.5 mcu_temp: temp=34.1 sd_pos=848 sysload=0.36 cputime=5.558 memavail=1629848 print_time=1571.274 buffer_time=0.000 print_stall=0 extruder: target=220 temp=206.0 pwm=0.588
Stats 1563.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=14957 bytes_read=28312 bytes_retransmit=9 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=58.9 pwm=0.450 rpi: temp=55.0 mcu_temp: temp=33.7 sd_pos=848 sysload=0.33 cputime=5.598 memavail=1629600 print_time=1572.275 buffer_time=0.000 print_stall=0 extruder: target=220 temp=207.9 pwm=0.490
Stats 1564.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=15065 bytes_read=28490 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=60 temp=59.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.1 sd_pos=848 sysload=0.33 cputime=5.636 memavail=1629752 print_time=1573.276 buffer_time=0.000 print_stall=0 extruder: target=220 temp=209.0 pwm=0.637
Stats 1565.7: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=15172 bytes_read=28698 bytes_retransmit=9 bytes_invalid=0 send_seq=824 receive_seq=824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.3 pwm=0.084 rpi: temp=55.5 mcu_temp: temp=34.0 sd_pos=848 sysload=0.33 cputime=5.674 memavail=1629876 print_time=1574.277 buffer_time=0.000 print_stall=0 extruder: target=220 temp=210.4 pwm=0.502
Stats 1566.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=15332 bytes_read=28925 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=59.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.7 sd_pos=848 sysload=0.33 cputime=5.713 memavail=1629824 print_time=1575.279 buffer_time=0.000 print_stall=0 extruder: target=220 temp=211.8 pwm=0.546
Stats 1567.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=15458 bytes_read=29108 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.5 pwm=0.492 rpi: temp=55.0 mcu_temp: temp=34.0 sd_pos=848 sysload=0.33 cputime=5.752 memavail=1629600 print_time=1576.279 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.8 pwm=0.526
Stats 1568.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=15549 bytes_read=29311 bytes_retransmit=9 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.6 pwm=0.323 rpi: temp=56.0 mcu_temp: temp=34.0 sd_pos=879 sysload=0.31 cputime=5.791 memavail=1629464 print_time=1577.280 buffer_time=0.000 print_stall=0 extruder: target=220 temp=213.8 pwm=0.453
Stats 1569.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=15688 bytes_read=29508 bytes_retransmit=9 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.7 pwm=0.498 rpi: temp=56.5 mcu_temp: temp=34.0 sd_pos=879 sysload=0.31 cputime=5.831 memavail=1629596 print_time=1578.281 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.8 pwm=0.520
Stats 1570.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=15806 bytes_read=29686 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.8 pwm=0.141 rpi: temp=55.0 mcu_temp: temp=33.9 sd_pos=879 sysload=0.31 cputime=5.868 memavail=1629388 print_time=1579.281 buffer_time=0.000 print_stall=0 extruder: target=220 temp=215.6 pwm=0.406
Heater extruder within range of 220.000
Stats 1571.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=15925 bytes_read=29909 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=59.8 pwm=0.446 rpi: temp=54.5 mcu_temp: temp=33.8 sd_pos=879 sysload=0.31 cputime=5.908 memavail=1629636 print_time=1580.281 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.2 pwm=0.548
Stats 1572.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=16035 bytes_read=30106 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=59.8 pwm=0.472 rpi: temp=56.0 mcu_temp: temp=33.8 sd_pos=879 sysload=0.31 cputime=5.946 memavail=1629892 print_time=1581.282 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.3 pwm=0.393
Stats 1573.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=16137 bytes_read=30289 bytes_retransmit=9 bytes_invalid=0 send_seq=887 receive_seq=887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=60 temp=59.9 pwm=0.496 rpi: temp=55.5 mcu_temp: temp=33.9 sd_pos=879 sysload=0.36 cputime=5.985 memavail=1629800 print_time=1582.283 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.9 pwm=0.307
Stats 1574.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=16229 bytes_read=30492 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=60 temp=59.9 pwm=0.375 rpi: temp=56.0 mcu_temp: temp=34.1 sd_pos=879 sysload=0.36 cputime=6.022 memavail=1629760 print_time=1583.284 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.3 pwm=0.348
Stats 1575.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=16480 bytes_read=30699 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=60 temp=59.9 pwm=0.596 rpi: temp=55.0 mcu_temp: temp=34.0 sd_pos=879 sysload=0.36 cputime=6.062 memavail=1629780 print_time=1584.284 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.8 pwm=0.389
Stats 1576.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=16585 bytes_read=30887 bytes_retransmit=9 bytes_invalid=0 send_seq=909 receive_seq=909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.9 pwm=0.543 rpi: temp=56.0 mcu_temp: temp=34.1 sd_pos=879 sysload=0.36 cputime=6.099 memavail=1630092 print_time=1585.284 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.1 pwm=0.444
Stats 1577.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=16690 bytes_read=31095 bytes_retransmit=9 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=60 temp=59.9 pwm=0.553 rpi: temp=55.0 mcu_temp: temp=33.8 sd_pos=879 sysload=0.36 cputime=6.137 memavail=1630072 print_time=1586.285 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.471
Stats 1578.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=16813 bytes_read=31287 bytes_retransmit=9 bytes_invalid=0 send_seq=923 receive_seq=923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.0 pwm=0.543 rpi: temp=54.5 mcu_temp: temp=33.6 sd_pos=879 sysload=0.33 cputime=6.175 memavail=1629564 print_time=1587.285 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.329
Stats 1579.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=16922 bytes_read=31470 bytes_retransmit=9 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.1 pwm=0.215 rpi: temp=55.5 mcu_temp: temp=33.8 sd_pos=879 sysload=0.33 cputime=6.212 memavail=1629596 print_time=1588.286 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.473
Stats 1580.7: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000048 bytes_write=17042 bytes_read=31683 bytes_retransmit=9 bytes_invalid=0 send_seq=939 receive_seq=939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=60 temp=60.1 pwm=0.324 rpi: temp=55.5 mcu_temp: temp=33.9 sd_pos=879 sysload=0.33 cputime=6.251 memavail=1629632 print_time=1589.287 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.390
Stats 1581.7: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=17131 bytes_read=31885 bytes_retransmit=9 bytes_invalid=0 send_seq=945 receive_seq=945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.2 pwm=0.388 rpi: temp=55.5 mcu_temp: temp=33.6 sd_pos=879 sysload=0.33 cputime=6.288 memavail=1629352 print_time=1590.287 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.585
Stats 1582.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=17251 bytes_read=32068 bytes_retransmit=9 bytes_invalid=0 send_seq=953 receive_seq=953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.5 sd_pos=879 sysload=0.33 cputime=6.327 memavail=1629352 print_time=1591.288 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.411
Stats 1583.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=17349 bytes_read=32271 bytes_retransmit=9 bytes_invalid=0 send_seq=959 receive_seq=959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.4 pwm=0.025 rpi: temp=56.0 mcu_temp: temp=33.2 sd_pos=879 sysload=0.30 cputime=6.364 memavail=1628840 print_time=1592.288 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.467
Stats 1584.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=17480 bytes_read=32468 bytes_retransmit=9 bytes_invalid=0 send_seq=967 receive_seq=967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.4 pwm=0.291 rpi: temp=55.5 mcu_temp: temp=33.9 sd_pos=879 sysload=0.30 cputime=6.402 memavail=1629100 print_time=1593.289 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.379
Stats 1585.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=17590 bytes_read=32651 bytes_retransmit=9 bytes_invalid=0 send_seq=975 receive_seq=975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=60 temp=60.4 pwm=0.422 rpi: temp=55.5 mcu_temp: temp=33.8 sd_pos=879 sysload=0.30 cputime=6.439 memavail=1629364 print_time=1594.289 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.389
Stats 1586.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17662 bytes_read=32864 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=60 temp=60.4 pwm=0.306 rpi: temp=54.5 mcu_temp: temp=33.7 sd_pos=879 sysload=0.30 cputime=6.476 memavail=1629100 print_time=1595.290 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.304
Stats 1587.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17787 bytes_read=33066 bytes_retransmit=9 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=60 temp=60.4 pwm=0.417 rpi: temp=54.5 mcu_temp: temp=33.5 sd_pos=879 sysload=0.30 cputime=6.531 memavail=1629024 print_time=1596.290 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.319
Stats 1588.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=17894 bytes_read=33244 bytes_retransmit=9 bytes_invalid=0 send_seq=996 receive_seq=996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=60 temp=60.5 pwm=0.163 rpi: temp=55.5 mcu_temp: temp=33.4 sd_pos=879 sysload=0.28 cputime=6.556 memavail=1629476 print_time=1597.291 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.417
Stats 1589.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18003 bytes_read=33452 bytes_retransmit=9 bytes_invalid=0 send_seq=1003 receive_seq=1003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=60 temp=60.5 pwm=0.419 rpi: temp=55.5 mcu_temp: temp=33.6 sd_pos=879 sysload=0.28 cputime=6.586 memavail=1629112 print_time=1598.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.352
Stats 1590.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18076 bytes_read=33634 bytes_retransmit=9 bytes_invalid=0 send_seq=1008 receive_seq=1008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=60 temp=60.5 pwm=0.422 rpi: temp=56.0 mcu_temp: temp=33.5 sd_pos=879 sysload=0.28 cputime=6.623 memavail=1629116 print_time=1599.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.352
Stats 1591.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=18197 bytes_read=33832 bytes_retransmit=9 bytes_invalid=0 send_seq=1016 receive_seq=1016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=60 temp=60.6 pwm=0.298 rpi: temp=55.0 mcu_temp: temp=33.6 sd_pos=879 sysload=0.28 cputime=6.664 memavail=1629632 print_time=1600.293 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.412
Stats 1592.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=18334 bytes_read=34055 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=60 temp=60.7 pwm=0.330 rpi: temp=55.5 mcu_temp: temp=33.5 sd_pos=879 sysload=0.28 cputime=6.704 memavail=1629284 print_time=1601.294 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.467
Stats 1593.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=18459 bytes_read=34257 bytes_retransmit=9 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=60 temp=60.6 pwm=0.495 rpi: temp=54.5 mcu_temp: temp=33.6 sd_pos=879 sysload=0.26 cputime=6.742 memavail=1629308 print_time=1602.295 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.365
Stats 1594.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=18550 bytes_read=34435 bytes_retransmit=9 bytes_invalid=0 send_seq=1042 receive_seq=1042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=60 temp=60.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=33.0 sd_pos=879 sysload=0.26 cputime=6.770 memavail=1629084 print_time=1603.295 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.335
Stats 1595.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=18655 bytes_read=34643 bytes_retransmit=9 bytes_invalid=0 send_seq=1049 receive_seq=1049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=60 temp=60.6 pwm=0.576 rpi: temp=55.0 mcu_temp: temp=33.9 sd_pos=879 sysload=0.26 cputime=6.807 memavail=1629276 print_time=1604.296 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.1 pwm=0.245
Stats 1596.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=18797 bytes_read=34865 bytes_retransmit=9 bytes_invalid=0 send_seq=1059 receive_seq=1059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=60 temp=60.6 pwm=0.534 rpi: temp=55.5 mcu_temp: temp=33.2 sd_pos=879 sysload=0.26 cputime=6.844 memavail=1629264 print_time=1605.297 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.1 pwm=0.236
Stats 1597.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=18901 bytes_read=35043 bytes_retransmit=9 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996463 heater_bed: target=60 temp=60.8 pwm=0.084 rpi: temp=54.5 mcu_temp: temp=33.3 sd_pos=879 sysload=0.26 cputime=6.880 memavail=1629328 print_time=1606.297 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.443
Stats 1598.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19026 bytes_read=35261 bytes_retransmit=9 bytes_invalid=0 send_seq=1075 receive_seq=1075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=60 temp=60.6 pwm=0.565 rpi: temp=55.0 mcu_temp: temp=33.2 sd_pos=879 sysload=0.24 cputime=6.906 memavail=1629580 print_time=1607.298 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.408
Stats 1599.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19130 bytes_read=35453 bytes_retransmit=9 bytes_invalid=0 send_seq=1082 receive_seq=1082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=60 temp=60.7 pwm=0.278 rpi: temp=54.5 mcu_temp: temp=33.7 sd_pos=879 sysload=0.24 cputime=6.935 memavail=1629836 print_time=1608.298 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.401
Stats 1600.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19237 bytes_read=35633 bytes_retransmit=9 bytes_invalid=0 send_seq=1090 receive_seq=1090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=60 temp=60.7 pwm=0.410 rpi: temp=55.5 mcu_temp: temp=33.8 sd_pos=879 sysload=0.24 cputime=6.971 memavail=1630008 print_time=1609.300 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.7 pwm=0.463
Stats 1601.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19341 bytes_read=35844 bytes_retransmit=9 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=60 temp=60.8 pwm=0.140 rpi: temp=55.5 mcu_temp: temp=33.6 sd_pos=879 sysload=0.24 cputime=7.008 memavail=1629828 print_time=1610.300 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.390
Stats 1602.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19459 bytes_read=36030 bytes_retransmit=9 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=60 temp=60.7 pwm=0.364 rpi: temp=55.0 mcu_temp: temp=33.6 sd_pos=879 sysload=0.24 cputime=7.046 memavail=1629772 print_time=1611.300 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.343
Stats 1603.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19568 bytes_read=36203 bytes_retransmit=9 bytes_invalid=0 send_seq=1113 receive_seq=1113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.8 pwm=0.131 rpi: temp=57.0 mcu_temp: temp=33.5 sd_pos=879 sysload=0.22 cputime=7.084 memavail=1629608 print_time=1612.302 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.5 pwm=0.395
Stats 1604.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19629 bytes_read=36395 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.8 pwm=0.085 rpi: temp=55.5 mcu_temp: temp=33.6 sd_pos=879 sysload=0.22 cputime=7.121 memavail=1629536 print_time=1613.303 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.5 pwm=0.395
Stats 1605.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=19760 bytes_read=36602 bytes_retransmit=9 bytes_invalid=0 send_seq=1128 receive_seq=1128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=33.7 sd_pos=879 sysload=0.22 cputime=7.161 memavail=1629576 print_time=1614.303 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.500
Stats 1606.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=19823 bytes_read=36796 bytes_retransmit=9 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.8 pwm=0.221 rpi: temp=55.5 mcu_temp: temp=32.3 sd_pos=879 sysload=0.22 cputime=7.197 memavail=1629356 print_time=1615.303 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.427
Stats 1607.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=19927 bytes_read=37004 bytes_retransmit=9 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=60 temp=60.9 pwm=0.021 rpi: temp=55.0 mcu_temp: temp=32.8 sd_pos=879 sysload=0.22 cputime=7.237 memavail=1629316 print_time=1616.304 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.272
Stats 1608.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20021 bytes_read=37196 bytes_retransmit=9 bytes_invalid=0 send_seq=1147 receive_seq=1147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.8 pwm=0.254 rpi: temp=55.5 mcu_temp: temp=33.7 sd_pos=879 sysload=0.20 cputime=7.276 memavail=1629204 print_time=1617.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.361
Stats 1609.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20129 bytes_read=37379 bytes_retransmit=9 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=60 temp=60.9 pwm=0.006 rpi: temp=55.0 mcu_temp: temp=33.1 sd_pos=879 sysload=0.20 cputime=7.314 memavail=1628964 print_time=1618.306 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.361
Stats 1610.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20264 bytes_read=37597 bytes_retransmit=9 bytes_invalid=0 send_seq=1164 receive_seq=1164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=60 temp=60.7 pwm=0.674 rpi: temp=56.0 mcu_temp: temp=33.2 sd_pos=879 sysload=0.20 cputime=7.354 memavail=1629112 print_time=1619.307 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.342
Stats 1611.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20374 bytes_read=37809 bytes_retransmit=9 bytes_invalid=0 send_seq=1172 receive_seq=1172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.7 pwm=0.528 rpi: temp=56.0 mcu_temp: temp=33.3 sd_pos=879 sysload=0.20 cputime=7.393 memavail=1629428 print_time=1620.308 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.416
Stats 1612.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20476 bytes_read=37987 bytes_retransmit=9 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.8 pwm=0.253 rpi: temp=55.5 mcu_temp: temp=32.7 sd_pos=879 sysload=0.20 cputime=7.430 memavail=1629640 print_time=1621.309 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.285
Stats 1613.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20586 bytes_read=38200 bytes_retransmit=9 bytes_invalid=0 send_seq=1187 receive_seq=1187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.7 pwm=0.573 rpi: temp=55.0 mcu_temp: temp=32.9 sd_pos=879 sysload=0.18 cputime=7.466 memavail=1629476 print_time=1622.310 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.480
Stats 1614.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20689 bytes_read=38392 bytes_retransmit=9 bytes_invalid=0 send_seq=1194 receive_seq=1194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.8 pwm=0.024 rpi: temp=55.0 mcu_temp: temp=33.0 sd_pos=879 sysload=0.18 cputime=7.501 memavail=1629444 print_time=1623.311 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.266
Stats 1615.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=20782 bytes_read=38570 bytes_retransmit=9 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.8 pwm=0.321 rpi: temp=56.5 mcu_temp: temp=32.6 sd_pos=879 sysload=0.18 cputime=7.537 memavail=1629728 print_time=1624.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.258
Stats 1616.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20905 bytes_read=38798 bytes_retransmit=9 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.8 pwm=0.160 rpi: temp=55.0 mcu_temp: temp=33.0 sd_pos=879 sysload=0.18 cputime=7.574 memavail=1629256 print_time=1625.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.408
Stats 1617.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=21030 bytes_read=39000 bytes_retransmit=9 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.8 pwm=0.150 rpi: temp=55.5 mcu_temp: temp=32.5 sd_pos=879 sysload=0.18 cputime=7.609 memavail=1629548 print_time=1626.313 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.501
Stats 1618.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=21139 bytes_read=39183 bytes_retransmit=9 bytes_invalid=0 send_seq=1226 receive_seq=1226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.8 pwm=0.036 rpi: temp=55.5 mcu_temp: temp=32.3 sd_pos=879 sysload=0.17 cputime=7.643 memavail=1629856 print_time=1627.313 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.398
Stats 1619.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=21213 bytes_read=39386 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=32.6 sd_pos=879 sysload=0.17 cputime=7.668 memavail=1630052 print_time=1628.313 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.398
Stats 1620.8: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=21846 bytes_read=39927 bytes_retransmit=9 bytes_invalid=0 send_seq=1260 receive_seq=1260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.8 pwm=0.197 rpi: temp=55.0 mcu_temp: temp=32.7 sd_pos=916 sysload=0.17 cputime=7.744 memavail=1629984 print_time=1631.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.391
Stats 1621.8: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=21978 bytes_read=40166 bytes_retransmit=9 bytes_invalid=0 send_seq=1269 receive_seq=1269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=60 temp=60.8 pwm=0.338 rpi: temp=56.0 mcu_temp: temp=32.9 sd_pos=916 sysload=0.17 cputime=7.785 memavail=1630044 print_time=1631.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.428
Stats 1622.8: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=22645 bytes_read=40870 bytes_retransmit=9 bytes_invalid=0 send_seq=1308 receive_seq=1308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.8 pwm=0.218 rpi: temp=56.0 mcu_temp: temp=32.0 sd_pos=916 sysload=0.17 cputime=7.861 memavail=1629764 print_time=1631.923 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.353
Stats 1623.8: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=23160 bytes_read=41419 bytes_retransmit=9 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=60 temp=60.7 pwm=0.301 rpi: temp=55.5 mcu_temp: temp=32.8 sd_pos=916 sysload=0.24 cputime=7.920 memavail=1629524 print_time=1632.923 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.353
Stats 1624.8: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=23821 bytes_read=42026 bytes_retransmit=9 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996469 heater_bed: target=60 temp=60.7 pwm=0.201 rpi: temp=55.5 mcu_temp: temp=32.8 sd_pos=916 sysload=0.24 cputime=7.986 memavail=1629268 print_time=1633.971 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.353
Stats 1625.8: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=24850 bytes_read=42988 bytes_retransmit=9 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.7 pwm=0.213 rpi: temp=56.5 mcu_temp: temp=32.5 sd_pos=916 sysload=0.24 cputime=8.085 memavail=1629508 print_time=1634.947 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.403
Stats 1626.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=25410 bytes_read=43603 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.6 pwm=0.504 rpi: temp=55.0 mcu_temp: temp=32.3 sd_pos=916 sysload=0.24 cputime=8.152 memavail=1629532 print_time=1635.947 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.527
Stats 1627.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=25956 bytes_read=44189 bytes_retransmit=9 bytes_invalid=0 send_seq=1523 receive_seq=1523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=60 temp=60.7 pwm=0.387 rpi: temp=56.0 mcu_temp: temp=32.9 sd_pos=916 sysload=0.24 cputime=8.216 memavail=1629572 print_time=1636.947 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.384
Stats 1628.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=26510 bytes_read=44800 bytes_retransmit=9 bytes_invalid=0 send_seq=1561 receive_seq=1561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=60 temp=60.7 pwm=0.125 rpi: temp=55.5 mcu_temp: temp=32.4 sd_pos=916 sysload=0.22 cputime=8.281 memavail=1630060 print_time=1637.947 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.616
Stats 1629.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=27054 bytes_read=45395 bytes_retransmit=9 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=60 temp=60.6 pwm=0.337 rpi: temp=55.0 mcu_temp: temp=33.2 sd_pos=916 sysload=0.22 cputime=8.345 memavail=1630144 print_time=1638.947 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.497
Stats 1630.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=28163 bytes_read=46111 bytes_retransmit=9 bytes_invalid=0 send_seq=1648 receive_seq=1648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=8 freq=71996465 heater_bed: target=60 temp=60.6 pwm=0.280 rpi: temp=56.0 mcu_temp: temp=32.6 sd_pos=916 sysload=0.22 cputime=8.430 memavail=1630564 print_time=1644.230 buffer_time=4.468 print_stall=0 extruder: target=220 temp=220.0 pwm=0.359
Stats 1631.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=28460 bytes_read=46482 bytes_retransmit=9 bytes_invalid=0 send_seq=1663 receive_seq=1663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996465 heater_bed: target=60 temp=60.6 pwm=0.089 rpi: temp=57.0 mcu_temp: temp=32.7 sd_pos=916 sysload=0.22 cputime=8.477 memavail=1630072 print_time=1644.230 buffer_time=3.467 print_stall=0 extruder: target=220 temp=220.0 pwm=0.369
Stats 1632.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=28654 bytes_read=46807 bytes_retransmit=9 bytes_invalid=0 send_seq=1675 receive_seq=1675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996465 heater_bed: target=60 temp=60.6 pwm=0.300 rpi: temp=55.5 mcu_temp: temp=32.0 sd_pos=916 sysload=0.22 cputime=8.523 memavail=1630080 print_time=1644.230 buffer_time=2.467 print_stall=0 extruder: target=220 temp=219.9 pwm=0.435
Stats 1633.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=28866 bytes_read=47108 bytes_retransmit=9 bytes_invalid=0 send_seq=1685 receive_seq=1685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996466 heater_bed: target=60 temp=60.5 pwm=0.565 rpi: temp=55.0 mcu_temp: temp=31.7 sd_pos=916 sysload=0.20 cputime=8.571 memavail=1630224 print_time=1644.232 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.454
Stats 1634.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=29057 bytes_read=47449 bytes_retransmit=9 bytes_invalid=0 send_seq=1697 receive_seq=1697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.5 pwm=0.352 rpi: temp=55.5 mcu_temp: temp=32.3 sd_pos=916 sysload=0.20 cputime=8.617 memavail=1630048 print_time=1644.232 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.497
Stats 1635.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=29541 bytes_read=47948 bytes_retransmit=9 bytes_invalid=0 send_seq=1727 receive_seq=1727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.6 pwm=0.065 rpi: temp=55.5 mcu_temp: temp=32.3 sd_pos=916 sysload=0.20 cputime=8.673 memavail=1629884 print_time=1644.932 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.571
Stats 1636.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=30082 bytes_read=48534 bytes_retransmit=9 bytes_invalid=0 send_seq=1763 receive_seq=1763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=32.5 sd_pos=916 sysload=0.20 cputime=8.737 memavail=1629776 print_time=1645.932 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.280
Stats 1637.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=30652 bytes_read=49150 bytes_retransmit=9 bytes_invalid=0 send_seq=1802 receive_seq=1802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=60 temp=60.5 pwm=0.497 rpi: temp=55.0 mcu_temp: temp=31.9 sd_pos=916 sysload=0.20 cputime=8.802 memavail=1629820 print_time=1646.932 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.426
Stats 1638.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=31197 bytes_read=49755 bytes_retransmit=9 bytes_invalid=0 send_seq=1842 receive_seq=1842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.4 pwm=0.476 rpi: temp=56.5 mcu_temp: temp=32.9 sd_pos=916 sysload=0.18 cputime=8.865 memavail=1628992 print_time=1647.932 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.426
Stats 1639.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=31703 bytes_read=50234 bytes_retransmit=9 bytes_invalid=0 send_seq=1867 receive_seq=1867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=18 freq=71996467 heater_bed: target=60 temp=60.6 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=32.6 sd_pos=916 sysload=0.18 cputime=8.907 memavail=1629340 print_time=1651.284 buffer_time=2.517 print_stall=0 extruder: target=220 temp=219.9 pwm=0.426
Stats 1640.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=31936 bytes_read=50570 bytes_retransmit=9 bytes_invalid=0 send_seq=1878 receive_seq=1878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996467 heater_bed: target=60 temp=60.4 pwm=0.607 rpi: temp=55.5 mcu_temp: temp=32.4 sd_pos=916 sysload=0.18 cputime=8.955 memavail=1629312 print_time=1651.286 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.338
Stats 1641.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=32166 bytes_read=50920 bytes_retransmit=9 bytes_invalid=0 send_seq=1892 receive_seq=1892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.6 pwm=0.117 rpi: temp=57.0 mcu_temp: temp=32.7 sd_pos=916 sysload=0.18 cputime=9.003 memavail=1629260 print_time=1651.286 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.420
Stats 1642.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=32600 bytes_read=51386 bytes_retransmit=9 bytes_invalid=0 send_seq=1921 receive_seq=1921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=60 temp=60.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.4 sd_pos=916 sysload=0.18 cputime=9.060 memavail=1629224 print_time=1651.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.353
Stats 1643.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=33139 bytes_read=52011 bytes_retransmit=9 bytes_invalid=0 send_seq=1959 receive_seq=1959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=60 temp=60.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.8 sd_pos=916 sysload=0.17 cputime=9.126 memavail=1629252 print_time=1652.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.368
Stats 1644.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=33763 bytes_read=52596 bytes_retransmit=9 bytes_invalid=0 send_seq=1994 receive_seq=1994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=60 temp=60.5 pwm=0.394 rpi: temp=56.5 mcu_temp: temp=32.0 sd_pos=916 sysload=0.17 cputime=9.191 memavail=1629012 print_time=1655.825 buffer_time=2.055 print_stall=0 extruder: target=220 temp=220.2 pwm=0.354
Stats 1645.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=34166 bytes_read=52917 bytes_retransmit=9 bytes_invalid=0 send_seq=2008 receive_seq=2008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=60.5 pwm=0.148 rpi: temp=55.5 mcu_temp: temp=32.3 sd_pos=916 sysload=0.17 cputime=9.239 memavail=1629336 print_time=1657.892 buffer_time=3.122 print_stall=0 extruder: target=220 temp=220.3 pwm=0.380
Stats 1646.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=34329 bytes_read=53282 bytes_retransmit=9 bytes_invalid=0 send_seq=2019 receive_seq=2019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=60.5 pwm=0.089 rpi: temp=56.5 mcu_temp: temp=32.0 sd_pos=916 sysload=0.17 cputime=9.284 memavail=1629020 print_time=1657.892 buffer_time=2.122 print_stall=0 extruder: target=220 temp=220.3 pwm=0.380
Stats 1647.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=34858 bytes_read=53608 bytes_retransmit=9 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=60.4 pwm=0.297 rpi: temp=56.0 mcu_temp: temp=32.4 sd_pos=916 sysload=0.17 cputime=9.336 memavail=1629056 print_time=1660.112 buffer_time=3.342 print_stall=0 extruder: target=220 temp=220.3 pwm=0.398
Stats 1648.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=35030 bytes_read=53919 bytes_retransmit=9 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=60.4 pwm=0.466 rpi: temp=56.5 mcu_temp: temp=32.2 sd_pos=916 sysload=0.31 cputime=9.382 memavail=1629584 print_time=1660.112 buffer_time=2.341 print_stall=0 extruder: target=220 temp=220.4 pwm=0.329
Stats 1649.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=35320 bytes_read=54279 bytes_retransmit=9 bytes_invalid=0 send_seq=2059 receive_seq=2059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=60 temp=60.2 pwm=0.953 rpi: temp=56.5 mcu_temp: temp=32.4 sd_pos=916 sysload=0.31 cputime=9.433 memavail=1629388 print_time=1660.812 buffer_time=2.041 print_stall=0 extruder: target=220 temp=220.6 pwm=0.329
Stats 1650.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=36260 bytes_read=54949 bytes_retransmit=9 bytes_invalid=0 send_seq=2094 receive_seq=2094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.4 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=32.6 sd_pos=916 sysload=0.31 cputime=9.519 memavail=1629332 print_time=1662.886 buffer_time=3.115 print_stall=0 extruder: target=220 temp=220.5 pwm=0.306
Stats 1651.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=36459 bytes_read=55321 bytes_retransmit=9 bytes_invalid=0 send_seq=2108 receive_seq=2108 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996481 heater_bed: target=60 temp=60.4 pwm=0.385 rpi: temp=56.0 mcu_temp: temp=32.0 sd_pos=916 sysload=0.31 cputime=9.569 memavail=1629300 print_time=1662.886 buffer_time=2.114 print_stall=0 extruder: target=220 temp=220.4 pwm=0.388
Stats 1652.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=36861 bytes_read=55727 bytes_retransmit=9 bytes_invalid=0 send_seq=2123 receive_seq=2123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=60.4 pwm=0.146 rpi: temp=56.0 mcu_temp: temp=31.9 sd_pos=916 sysload=0.31 cputime=9.623 memavail=1629308 print_time=1666.286 buffer_time=4.514 print_stall=0 extruder: target=220 temp=220.4 pwm=0.304
Stats 1653.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=37143 bytes_read=56079 bytes_retransmit=9 bytes_invalid=0 send_seq=2136 receive_seq=2136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.3 pwm=0.521 rpi: temp=55.5 mcu_temp: temp=32.5 sd_pos=916 sysload=0.29 cputime=9.675 memavail=1629300 print_time=1666.286 buffer_time=3.513 print_stall=0 extruder: target=220 temp=220.4 pwm=0.373
Stats 1654.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=37353 bytes_read=56436 bytes_retransmit=9 bytes_invalid=0 send_seq=2150 receive_seq=2150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.4 pwm=0.139 rpi: temp=56.0 mcu_temp: temp=32.2 sd_pos=916 sysload=0.29 cputime=9.714 memavail=1629592 print_time=1666.286 buffer_time=2.512 print_stall=0 extruder: target=220 temp=220.3 pwm=0.348
Stats 1655.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=37662 bytes_read=56852 bytes_retransmit=9 bytes_invalid=0 send_seq=2167 receive_seq=2167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.4 pwm=0.177 rpi: temp=56.0 mcu_temp: temp=32.5 sd_pos=916 sysload=0.29 cputime=9.767 memavail=1630152 print_time=1666.886 buffer_time=2.112 print_stall=0 extruder: target=220 temp=220.3 pwm=0.370
Stats 1656.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=38041 bytes_read=57234 bytes_retransmit=9 bytes_invalid=0 send_seq=2183 receive_seq=2183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=60.3 pwm=0.122 rpi: temp=57.0 mcu_temp: temp=32.2 sd_pos=916 sysload=0.29 cputime=9.819 memavail=1630076 print_time=1668.693 buffer_time=2.918 print_stall=0 extruder: target=220 temp=220.0 pwm=0.440
Stats 1657.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=38510 bytes_read=57616 bytes_retransmit=9 bytes_invalid=0 send_seq=2202 receive_seq=2202 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.3 pwm=0.352 rpi: temp=56.0 mcu_temp: temp=32.7 sd_pos=916 sysload=0.29 cputime=9.861 memavail=1630048 print_time=1670.725 buffer_time=3.949 print_stall=0 extruder: target=220 temp=220.0 pwm=0.485
Stats 1658.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=38838 bytes_read=58027 bytes_retransmit=9 bytes_invalid=0 send_seq=2218 receive_seq=2218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.3 pwm=0.443 rpi: temp=57.5 mcu_temp: temp=33.1 sd_pos=916 sysload=0.27 cputime=9.914 memavail=1629820 print_time=1670.725 buffer_time=2.948 print_stall=0 extruder: target=220 temp=219.7 pwm=0.587
Stats 1659.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=39128 bytes_read=58384 bytes_retransmit=9 bytes_invalid=0 send_seq=2232 receive_seq=2232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.2 pwm=0.438 rpi: temp=56.5 mcu_temp: temp=32.5 sd_pos=916 sysload=0.27 cputime=9.954 memavail=1630084 print_time=1671.475 buffer_time=2.698 print_stall=0 extruder: target=220 temp=219.8 pwm=0.458
Stats 1660.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=39448 bytes_read=58749 bytes_retransmit=9 bytes_invalid=0 send_seq=2246 receive_seq=2246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.3 pwm=0.117 rpi: temp=56.5 mcu_temp: temp=32.7 sd_pos=916 sysload=0.27 cputime=9.996 memavail=1630064 print_time=1672.225 buffer_time=2.447 print_stall=0 extruder: target=220 temp=219.6 pwm=0.499
Stats 1661.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=39846 bytes_read=59153 bytes_retransmit=9 bytes_invalid=0 send_seq=2263 receive_seq=2263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.3 pwm=0.051 rpi: temp=56.0 mcu_temp: temp=32.4 sd_pos=1301 sysload=0.27 cputime=10.051 memavail=1630084 print_time=1674.482 buffer_time=3.705 print_stall=0 extruder: target=220 temp=219.6 pwm=0.482
Stats 1662.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=40038 bytes_read=59495 bytes_retransmit=9 bytes_invalid=0 send_seq=2276 receive_seq=2276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=60 temp=60.3 pwm=0.188 rpi: temp=57.5 mcu_temp: temp=33.1 sd_pos=1301 sysload=0.27 cputime=10.102 memavail=1630080 print_time=1674.482 buffer_time=2.704 print_stall=0 extruder: target=220 temp=219.6 pwm=0.396
Stats 1663.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=41038 bytes_read=59922 bytes_retransmit=9 bytes_invalid=0 send_seq=2303 receive_seq=2303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.3 pwm=0.215 rpi: temp=56.5 mcu_temp: temp=32.6 sd_pos=1461 sysload=0.24 cputime=10.160 memavail=1629692 print_time=1675.603 buffer_time=2.823 print_stall=0 extruder: target=220 temp=219.6 pwm=0.410
Stats 1664.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=41615 bytes_read=60332 bytes_retransmit=9 bytes_invalid=0 send_seq=2322 receive_seq=2322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.3 pwm=0.396 rpi: temp=57.0 mcu_temp: temp=32.2 sd_pos=1575 sysload=0.24 cputime=10.213 memavail=1629892 print_time=1675.896 buffer_time=2.115 print_stall=0 extruder: target=220 temp=219.7 pwm=0.291
Stats 1665.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000026 bytes_write=42856 bytes_read=60769 bytes_retransmit=9 bytes_invalid=0 send_seq=2352 receive_seq=2352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.3 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=31.9 sd_pos=2001 sysload=0.24 cputime=10.275 memavail=1630164 print_time=1676.811 buffer_time=2.031 print_stall=0 extruder: target=220 temp=219.4 pwm=0.555
Stats 1666.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=43977 bytes_read=61226 bytes_retransmit=9 bytes_invalid=0 send_seq=2380 receive_seq=2380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.2 pwm=0.423 rpi: temp=56.0 mcu_temp: temp=32.4 sd_pos=2576 sysload=0.24 cputime=10.341 memavail=1630144 print_time=1678.273 buffer_time=2.492 print_stall=0 extruder: target=220 temp=219.4 pwm=0.555
Stats 1667.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=44502 bytes_read=61653 bytes_retransmit=9 bytes_invalid=0 send_seq=2400 receive_seq=2400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.3 pwm=0.355 rpi: temp=56.5 mcu_temp: temp=32.8 sd_pos=2633 sysload=0.24 cputime=10.396 memavail=1630228 print_time=1678.787 buffer_time=2.006 print_stall=0 extruder: target=220 temp=219.5 pwm=0.407
Stats 1668.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=45522 bytes_read=62070 bytes_retransmit=9 bytes_invalid=0 send_seq=2426 receive_seq=2426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.3 pwm=0.277 rpi: temp=55.5 mcu_temp: temp=32.1 sd_pos=2817 sysload=0.22 cputime=10.451 memavail=1630180 print_time=1680.897 buffer_time=3.115 print_stall=0 extruder: target=220 temp=219.3 pwm=0.565
Stats 1669.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=45773 bytes_read=62442 bytes_retransmit=9 bytes_invalid=0 send_seq=2440 receive_seq=2440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.3 pwm=0.153 rpi: temp=57.0 mcu_temp: temp=32.1 sd_pos=2817 sysload=0.22 cputime=10.494 memavail=1629716 print_time=1680.897 buffer_time=2.114 print_stall=0 extruder: target=220 temp=219.5 pwm=0.414
Stats 1670.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=47216 bytes_read=62923 bytes_retransmit=9 bytes_invalid=0 send_seq=2473 receive_seq=2473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.3 pwm=0.269 rpi: temp=57.5 mcu_temp: temp=32.5 sd_pos=3041 sysload=0.22 cputime=10.557 memavail=1629724 print_time=1683.894 buffer_time=4.110 print_stall=0 extruder: target=220 temp=219.5 pwm=0.479
Stats 1671.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=47476 bytes_read=63295 bytes_retransmit=9 bytes_invalid=0 send_seq=2487 receive_seq=2487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.3 pwm=0.222 rpi: temp=56.5 mcu_temp: temp=32.5 sd_pos=3041 sysload=0.22 cputime=10.609 memavail=1629996 print_time=1683.894 buffer_time=3.110 print_stall=0 extruder: target=220 temp=219.6 pwm=0.399
Stats 1672.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=47691 bytes_read=63672 bytes_retransmit=9 bytes_invalid=0 send_seq=2502 receive_seq=2502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.3 pwm=0.477 rpi: temp=55.5 mcu_temp: temp=32.7 sd_pos=3041 sysload=0.22 cputime=10.663 memavail=1630004 print_time=1683.894 buffer_time=2.109 print_stall=0 extruder: target=220 temp=219.6 pwm=0.416
Stats 1673.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=48234 bytes_read=64078 bytes_retransmit=9 bytes_invalid=0 send_seq=2520 receive_seq=2520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.3 pwm=0.079 rpi: temp=56.5 mcu_temp: temp=32.5 sd_pos=3100 sysload=0.21 cputime=10.719 memavail=1629776 print_time=1686.116 buffer_time=3.329 print_stall=0 extruder: target=220 temp=219.7 pwm=0.390
Stats 1674.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=48445 bytes_read=64435 bytes_retransmit=9 bytes_invalid=0 send_seq=2534 receive_seq=2534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.3 pwm=0.120 rpi: temp=57.0 mcu_temp: temp=32.1 sd_pos=3100 sysload=0.21 cputime=10.772 memavail=1630028 print_time=1686.116 buffer_time=2.329 print_stall=0 extruder: target=220 temp=219.8 pwm=0.373
Stats 1675.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=48985 bytes_read=64832 bytes_retransmit=9 bytes_invalid=0 send_seq=2553 receive_seq=2553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.2 pwm=0.392 rpi: temp=56.5 mcu_temp: temp=33.1 sd_pos=3160 sysload=0.21 cputime=10.815 memavail=1630288 print_time=1688.337 buffer_time=3.550 print_stall=0 extruder: target=220 temp=220.0 pwm=0.278
Stats 1676.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=49198 bytes_read=65233 bytes_retransmit=9 bytes_invalid=0 send_seq=2567 receive_seq=2567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=32.9 sd_pos=3160 sysload=0.21 cputime=10.869 memavail=1630340 print_time=1688.337 buffer_time=2.549 print_stall=0 extruder: target=220 temp=219.9 pwm=0.388
Stats 1677.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=49714 bytes_read=65600 bytes_retransmit=9 bytes_invalid=0 send_seq=2583 receive_seq=2583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.2 pwm=0.345 rpi: temp=57.0 mcu_temp: temp=33.0 sd_pos=3219 sysload=0.21 cputime=10.926 memavail=1630248 print_time=1690.558 buffer_time=3.770 print_stall=0 extruder: target=220 temp=220.1 pwm=0.330
Stats 1678.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=49919 bytes_read=65967 bytes_retransmit=9 bytes_invalid=0 send_seq=2596 receive_seq=2596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.2 pwm=0.345 rpi: temp=56.0 mcu_temp: temp=32.6 sd_pos=3219 sysload=0.19 cputime=10.979 memavail=1629988 print_time=1690.558 buffer_time=2.769 print_stall=0 extruder: target=220 temp=220.2 pwm=0.304
Stats 1679.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=50296 bytes_read=66363 bytes_retransmit=9 bytes_invalid=0 send_seq=2612 receive_seq=2612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.1 pwm=0.748 rpi: temp=56.5 mcu_temp: temp=33.6 sd_pos=3277 sysload=0.19 cputime=11.034 memavail=1629760 print_time=1690.913 buffer_time=2.123 print_stall=0 extruder: target=220 temp=220.3 pwm=0.336
Stats 1680.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=50742 bytes_read=66735 bytes_retransmit=9 bytes_invalid=0 send_seq=2629 receive_seq=2629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=32.8 sd_pos=3277 sysload=0.19 cputime=11.090 memavail=1629484 print_time=1691.937 buffer_time=2.146 print_stall=0 extruder: target=220 temp=220.4 pwm=0.310
Stats 1681.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=51110 bytes_read=67132 bytes_retransmit=9 bytes_invalid=0 send_seq=2645 receive_seq=2645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.2 pwm=0.473 rpi: temp=55.5 mcu_temp: temp=33.2 sd_pos=3338 sysload=0.19 cputime=11.147 memavail=1629548 print_time=1693.668 buffer_time=2.877 print_stall=0 extruder: target=220 temp=220.2 pwm=0.409
Stats 1682.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=51500 bytes_read=67533 bytes_retransmit=9 bytes_invalid=0 send_seq=2662 receive_seq=2662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996492 heater_bed: target=60 temp=60.2 pwm=0.095 rpi: temp=56.0 mcu_temp: temp=33.2 sd_pos=3338 sysload=0.19 cputime=11.201 memavail=1629508 print_time=1694.742 buffer_time=2.951 print_stall=0 extruder: target=220 temp=220.4 pwm=0.308
Stats 1683.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=51877 bytes_read=67905 bytes_retransmit=9 bytes_invalid=0 send_seq=2679 receive_seq=2679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.2 pwm=0.209 rpi: temp=56.0 mcu_temp: temp=32.8 sd_pos=3400 sysload=0.17 cputime=11.257 memavail=1629532 print_time=1696.473 buffer_time=3.681 print_stall=0 extruder: target=220 temp=220.1 pwm=0.510
Stats 1684.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=52161 bytes_read=68267 bytes_retransmit=9 bytes_invalid=0 send_seq=2691 receive_seq=2691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.2 pwm=0.179 rpi: temp=55.5 mcu_temp: temp=33.0 sd_pos=3400 sysload=0.17 cputime=11.311 memavail=1629688 print_time=1696.473 buffer_time=2.681 print_stall=0 extruder: target=220 temp=220.2 pwm=0.485
Stats 1685.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000032 bytes_write=52607 bytes_read=68668 bytes_retransmit=9 bytes_invalid=0 send_seq=2708 receive_seq=2708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.2 pwm=0.452 rpi: temp=57.0 mcu_temp: temp=33.6 sd_pos=3400 sysload=0.17 cputime=11.366 memavail=1629700 print_time=1697.547 buffer_time=2.754 print_stall=0 extruder: target=220 temp=220.3 pwm=0.415
Stats 1686.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=53002 bytes_read=69060 bytes_retransmit=9 bytes_invalid=0 send_seq=2726 receive_seq=2726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=33.7 sd_pos=3462 sysload=0.17 cputime=11.424 memavail=1629956 print_time=1699.278 buffer_time=3.484 print_stall=0 extruder: target=220 temp=220.1 pwm=0.492
Stats 1687.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=53197 bytes_read=69427 bytes_retransmit=9 bytes_invalid=0 send_seq=2739 receive_seq=2739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.2 pwm=0.106 rpi: temp=56.0 mcu_temp: temp=33.3 sd_pos=3462 sysload=0.17 cputime=11.477 memavail=1629980 print_time=1699.278 buffer_time=2.484 print_stall=0 extruder: target=220 temp=220.0 pwm=0.508
Stats 1688.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=53687 bytes_read=69838 bytes_retransmit=9 bytes_invalid=0 send_seq=2758 receive_seq=2758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.3 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=33.2 sd_pos=3462 sysload=0.16 cputime=11.533 memavail=1630716 print_time=1700.352 buffer_time=2.557 print_stall=0 extruder: target=220 temp=220.0 pwm=0.491
Stats 1689.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=54061 bytes_read=70210 bytes_retransmit=9 bytes_invalid=0 send_seq=2775 receive_seq=2775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.2 pwm=0.443 rpi: temp=55.5 mcu_temp: temp=33.2 sd_pos=3524 sysload=0.16 cputime=11.589 memavail=1630460 print_time=1702.083 buffer_time=3.287 print_stall=0 extruder: target=220 temp=220.1 pwm=0.360
Stats 1690.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=54287 bytes_read=70587 bytes_retransmit=9 bytes_invalid=0 send_seq=2790 receive_seq=2790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=60.1 pwm=0.650 rpi: temp=56.5 mcu_temp: temp=34.0 sd_pos=3524 sysload=0.16 cputime=11.642 memavail=1630460 print_time=1702.083 buffer_time=2.287 print_stall=0 extruder: target=220 temp=220.2 pwm=0.349
Stats 1691.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=54754 bytes_read=71008 bytes_retransmit=9 bytes_invalid=0 send_seq=2808 receive_seq=2808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.2 pwm=0.309 rpi: temp=56.0 mcu_temp: temp=33.8 sd_pos=3524 sysload=0.16 cputime=11.697 memavail=1629964 print_time=1703.157 buffer_time=2.360 print_stall=0 extruder: target=220 temp=220.2 pwm=0.363
Stats 1692.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=55135 bytes_read=71380 bytes_retransmit=9 bytes_invalid=0 send_seq=2825 receive_seq=2825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996503 heater_bed: target=60 temp=60.2 pwm=0.053 rpi: temp=55.5 mcu_temp: temp=34.3 sd_pos=3586 sysload=0.16 cputime=11.753 memavail=1629904 print_time=1704.888 buffer_time=3.090 print_stall=0 extruder: target=220 temp=220.1 pwm=0.438
Stats 1693.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=55341 bytes_read=71757 bytes_retransmit=9 bytes_invalid=0 send_seq=2840 receive_seq=2840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=60.1 pwm=0.368 rpi: temp=56.5 mcu_temp: temp=33.9 sd_pos=3586 sysload=0.15 cputime=11.807 memavail=1629904 print_time=1704.888 buffer_time=2.089 print_stall=0 extruder: target=220 temp=220.3 pwm=0.334
Stats 1694.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=55835 bytes_read=72163 bytes_retransmit=9 bytes_invalid=0 send_seq=2858 receive_seq=2858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.1 pwm=0.369 rpi: temp=56.0 mcu_temp: temp=33.7 sd_pos=3586 sysload=0.15 cputime=11.862 memavail=1629640 print_time=1705.962 buffer_time=2.163 print_stall=0 extruder: target=220 temp=220.2 pwm=0.360
Stats 1695.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=56223 bytes_read=72535 bytes_retransmit=9 bytes_invalid=0 send_seq=2875 receive_seq=2875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.2 pwm=0.188 rpi: temp=56.0 mcu_temp: temp=34.1 sd_pos=3648 sysload=0.15 cputime=11.920 memavail=1629304 print_time=1707.693 buffer_time=2.894 print_stall=0 extruder: target=220 temp=220.3 pwm=0.334
Stats 1696.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=56655 bytes_read=72937 bytes_retransmit=9 bytes_invalid=0 send_seq=2892 receive_seq=2892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996501 heater_bed: target=60 temp=60.2 pwm=0.175 rpi: temp=55.5 mcu_temp: temp=33.8 sd_pos=3648 sysload=0.15 cputime=11.975 memavail=1629064 print_time=1709.101 buffer_time=3.301 print_stall=0 extruder: target=220 temp=220.2 pwm=0.415
Stats 1697.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=56919 bytes_read=73323 bytes_retransmit=9 bytes_invalid=0 send_seq=2906 receive_seq=2906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.2 pwm=0.089 rpi: temp=56.5 mcu_temp: temp=32.9 sd_pos=3648 sysload=0.15 cputime=12.031 memavail=1629384 print_time=1709.101 buffer_time=2.300 print_stall=0 extruder: target=220 temp=220.4 pwm=0.300
Stats 1698.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=57242 bytes_read=73680 bytes_retransmit=9 bytes_invalid=0 send_seq=2920 receive_seq=2920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996500 heater_bed: target=60 temp=60.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=3710 sysload=0.13 cputime=12.084 memavail=1629188 print_time=1710.498 buffer_time=2.697 print_stall=0 extruder: target=220 temp=220.3 pwm=0.364
Stats 1699.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=57673 bytes_read=74062 bytes_retransmit=9 bytes_invalid=0 send_seq=2936 receive_seq=2936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.2 pwm=0.168 rpi: temp=56.0 mcu_temp: temp=34.1 sd_pos=3710 sysload=0.13 cputime=12.139 memavail=1629324 print_time=1711.572 buffer_time=2.770 print_stall=0 extruder: target=220 temp=220.4 pwm=0.364
Stats 1700.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=58053 bytes_read=74463 bytes_retransmit=9 bytes_invalid=0 send_seq=2953 receive_seq=2953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.2 pwm=0.199 rpi: temp=55.0 mcu_temp: temp=33.6 sd_pos=3771 sysload=0.13 cputime=12.198 memavail=1629284 print_time=1713.303 buffer_time=3.501 print_stall=0 extruder: target=220 temp=220.2 pwm=0.393
Stats 1701.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=58249 bytes_read=74830 bytes_retransmit=9 bytes_invalid=0 send_seq=2966 receive_seq=2966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.2 pwm=0.221 rpi: temp=55.0 mcu_temp: temp=34.1 sd_pos=3771 sysload=0.13 cputime=12.250 memavail=1629036 print_time=1713.303 buffer_time=2.500 print_stall=0 extruder: target=220 temp=220.2 pwm=0.384
Stats 1702.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=58716 bytes_read=75217 bytes_retransmit=9 bytes_invalid=0 send_seq=2983 receive_seq=2983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996498 heater_bed: target=60 temp=60.2 pwm=0.283 rpi: temp=55.5 mcu_temp: temp=34.2 sd_pos=3771 sysload=0.13 cputime=12.305 memavail=1629308 print_time=1714.711 buffer_time=2.908 print_stall=0 extruder: target=220 temp=220.3 pwm=0.371
Stats 1703.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=58949 bytes_read=75593 bytes_retransmit=9 bytes_invalid=0 send_seq=2995 receive_seq=2995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.2 pwm=0.270 rpi: temp=56.0 mcu_temp: temp=33.8 sd_pos=3831 sysload=0.12 cputime=12.347 memavail=1629500 print_time=1716.108 buffer_time=3.305 print_stall=0 extruder: target=220 temp=220.4 pwm=0.293
Stats 1704.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=59263 bytes_read=75960 bytes_retransmit=9 bytes_invalid=0 send_seq=3011 receive_seq=3011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.2 pwm=0.305 rpi: temp=56.0 mcu_temp: temp=34.0 sd_pos=3831 sysload=0.12 cputime=12.401 memavail=1628936 print_time=1716.108 buffer_time=2.304 print_stall=0 extruder: target=220 temp=220.4 pwm=0.313
Stats 1705.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=59757 bytes_read=76362 bytes_retransmit=9 bytes_invalid=0 send_seq=3031 receive_seq=3031 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.2 pwm=0.202 rpi: temp=56.5 mcu_temp: temp=34.2 sd_pos=3861 sysload=0.12 cputime=12.441 memavail=1628968 print_time=1717.182 buffer_time=2.378 print_stall=0 extruder: target=220 temp=220.1 pwm=0.491
Stats 1706.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=60360 bytes_read=76798 bytes_retransmit=9 bytes_invalid=0 send_seq=3052 receive_seq=3052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.2 pwm=0.176 rpi: temp=56.0 mcu_temp: temp=34.0 sd_pos=4015 sysload=0.12 cputime=12.501 memavail=1629252 print_time=1718.564 buffer_time=2.758 print_stall=0 extruder: target=220 temp=220.0 pwm=0.460
Stats 1707.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=60927 bytes_read=77190 bytes_retransmit=9 bytes_invalid=0 send_seq=3073 receive_seq=3073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.1 pwm=0.379 rpi: temp=55.5 mcu_temp: temp=34.0 sd_pos=4138 sysload=0.12 cputime=12.562 memavail=1629496 print_time=1719.689 buffer_time=2.882 print_stall=0 extruder: target=220 temp=219.9 pwm=0.531
Stats 1708.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61332 bytes_read=77582 bytes_retransmit=9 bytes_invalid=0 send_seq=3091 receive_seq=3091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.1 pwm=0.472 rpi: temp=56.5 mcu_temp: temp=34.2 sd_pos=4199 sysload=0.11 cputime=12.618 memavail=1629628 print_time=1720.667 buffer_time=2.860 print_stall=0 extruder: target=220 temp=220.0 pwm=0.380
Stats 1709.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61907 bytes_read=77988 bytes_retransmit=9 bytes_invalid=0 send_seq=3109 receive_seq=3109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.0 pwm=0.666 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=4321 sysload=0.11 cputime=12.672 memavail=1629660 print_time=1721.706 buffer_time=2.898 print_stall=0 extruder: target=220 temp=220.1 pwm=0.380
Stats 1710.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=62333 bytes_read=78355 bytes_retransmit=9 bytes_invalid=0 send_seq=3125 receive_seq=3125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.0 pwm=0.464 rpi: temp=55.5 mcu_temp: temp=34.3 sd_pos=4383 sysload=0.11 cputime=12.727 memavail=1629620 print_time=1722.615 buffer_time=2.807 print_stall=0 extruder: target=220 temp=220.1 pwm=0.343
Stats 1711.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=63074 bytes_read=78792 bytes_retransmit=9 bytes_invalid=0 send_seq=3146 receive_seq=3146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.5 sd_pos=4503 sysload=0.11 cputime=12.769 memavail=1629620 print_time=1723.725 buffer_time=2.915 print_stall=0 extruder: target=220 temp=220.0 pwm=0.442
Stats 1712.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=63480 bytes_read=79173 bytes_retransmit=9 bytes_invalid=0 send_seq=3162 receive_seq=3162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.1 pwm=0.602 rpi: temp=57.0 mcu_temp: temp=34.4 sd_pos=4561 sysload=0.11 cputime=12.824 memavail=1629384 print_time=1724.516 buffer_time=2.706 print_stall=0 extruder: target=220 temp=220.1 pwm=0.344
Stats 1713.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=64036 bytes_read=79560 bytes_retransmit=9 bytes_invalid=0 send_seq=3182 receive_seq=3182 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.2 pwm=0.146 rpi: temp=55.0 mcu_temp: temp=34.6 sd_pos=4621 sysload=0.10 cputime=12.883 memavail=1629648 print_time=1725.345 buffer_time=2.535 print_stall=0 extruder: target=220 temp=219.8 pwm=0.478
Stats 1714.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=64495 bytes_read=79967 bytes_retransmit=9 bytes_invalid=0 send_seq=3200 receive_seq=3200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.0 pwm=0.728 rpi: temp=55.5 mcu_temp: temp=34.1 sd_pos=4680 sysload=0.10 cputime=12.941 memavail=1629700 print_time=1726.174 buffer_time=2.363 print_stall=0 extruder: target=220 temp=220.0 pwm=0.367
Stats 1715.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=64989 bytes_read=80368 bytes_retransmit=9 bytes_invalid=0 send_seq=3220 receive_seq=3220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.1 pwm=0.154 rpi: temp=56.0 mcu_temp: temp=34.1 sd_pos=4740 sysload=0.10 cputime=12.997 memavail=1629456 print_time=1727.003 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.9 pwm=0.390
Stats 1716.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=65452 bytes_read=80755 bytes_retransmit=9 bytes_invalid=0 send_seq=3237 receive_seq=3237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996499 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.3 sd_pos=4800 sysload=0.10 cputime=13.054 memavail=1629456 print_time=1727.832 buffer_time=2.019 print_stall=0 extruder: target=220 temp=219.7 pwm=0.531
Stats 1717.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=66115 bytes_read=81177 bytes_retransmit=9 bytes_invalid=0 send_seq=3258 receive_seq=3258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.4 sd_pos=4920 sysload=0.10 cputime=13.098 memavail=1629428 print_time=1729.490 buffer_time=2.677 print_stall=0 extruder: target=220 temp=219.7 pwm=0.418
Stats 1718.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=66667 bytes_read=81573 bytes_retransmit=9 bytes_invalid=0 send_seq=3277 receive_seq=3277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996497 heater_bed: target=60 temp=60.1 pwm=0.239 rpi: temp=55.5 mcu_temp: temp=34.5 sd_pos=4979 sysload=0.10 cputime=13.157 memavail=1629616 print_time=1730.319 buffer_time=2.506 print_stall=0 extruder: target=220 temp=219.5 pwm=0.578
Stats 1719.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=67136 bytes_read=81950 bytes_retransmit=9 bytes_invalid=0 send_seq=3295 receive_seq=3295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.1 pwm=0.107 rpi: temp=55.5 mcu_temp: temp=34.3 sd_pos=5038 sysload=0.10 cputime=13.212 memavail=1629956 print_time=1731.149 buffer_time=2.334 print_stall=0 extruder: target=220 temp=219.6 pwm=0.474
Stats 1720.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=67618 bytes_read=82356 bytes_retransmit=9 bytes_invalid=0 send_seq=3315 receive_seq=3315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.1 pwm=0.257 rpi: temp=56.5 mcu_temp: temp=34.4 sd_pos=5098 sysload=0.10 cputime=13.269 memavail=1629976 print_time=1731.978 buffer_time=2.163 print_stall=0 extruder: target=220 temp=219.6 pwm=0.425
Stats 1721.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=68048 bytes_read=82746 bytes_retransmit=9 bytes_invalid=0 send_seq=3332 receive_seq=3332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.1 pwm=0.219 rpi: temp=56.0 mcu_temp: temp=34.5 sd_pos=5158 sysload=0.10 cputime=13.324 memavail=1630516 print_time=1732.939 buffer_time=2.124 print_stall=0 extruder: target=220 temp=219.7 pwm=0.425
Stats 1722.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=68501 bytes_read=83103 bytes_retransmit=9 bytes_invalid=0 send_seq=3348 receive_seq=3348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.0 pwm=0.406 rpi: temp=56.5 mcu_temp: temp=34.4 sd_pos=5218 sysload=0.10 cputime=13.365 memavail=1630792 print_time=1734.012 buffer_time=2.197 print_stall=0 extruder: target=220 temp=219.7 pwm=0.439
Stats 1723.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=69102 bytes_read=83508 bytes_retransmit=9 bytes_invalid=0 send_seq=3367 receive_seq=3367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.1 pwm=0.191 rpi: temp=56.5 mcu_temp: temp=34.9 sd_pos=5278 sysload=0.09 cputime=13.423 memavail=1630520 print_time=1736.817 buffer_time=4.001 print_stall=0 extruder: target=220 temp=219.6 pwm=0.535
Stats 1724.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=69294 bytes_read=83874 bytes_retransmit=9 bytes_invalid=0 send_seq=3380 receive_seq=3380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=34.7 sd_pos=5278 sysload=0.09 cputime=13.461 memavail=1630228 print_time=1736.817 buffer_time=3.001 print_stall=0 extruder: target=220 temp=219.9 pwm=0.306
Stats 1725.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=69486 bytes_read=84226 bytes_retransmit=9 bytes_invalid=0 send_seq=3393 receive_seq=3393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.3 sd_pos=5278 sysload=0.09 cputime=13.516 memavail=1630184 print_time=1736.817 buffer_time=2.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.504
Stats 1726.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=70050 bytes_read=84648 bytes_retransmit=9 bytes_invalid=0 send_seq=3411 receive_seq=3411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996494 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=34.8 sd_pos=5338 sysload=0.09 cputime=13.573 memavail=1629900 print_time=1739.622 buffer_time=3.805 print_stall=0 extruder: target=220 temp=219.8 pwm=0.444
Stats 1727.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=70248 bytes_read=85019 bytes_retransmit=9 bytes_invalid=0 send_seq=3425 receive_seq=3425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.1 pwm=0.303 rpi: temp=56.0 mcu_temp: temp=34.8 sd_pos=5338 sysload=0.09 cputime=13.628 memavail=1630200 print_time=1739.622 buffer_time=2.805 print_stall=0 extruder: target=220 temp=219.9 pwm=0.372
Stats 1728.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=70812 bytes_read=85406 bytes_retransmit=9 bytes_invalid=0 send_seq=3445 receive_seq=3445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.1 pwm=0.402 rpi: temp=55.5 mcu_temp: temp=34.8 sd_pos=5397 sysload=0.08 cputime=13.689 memavail=1629940 print_time=1742.427 buffer_time=4.610 print_stall=0 extruder: target=220 temp=220.0 pwm=0.322
Stats 1729.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=71103 bytes_read=85819 bytes_retransmit=9 bytes_invalid=0 send_seq=3462 receive_seq=3462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996496 heater_bed: target=60 temp=60.0 pwm=0.509 rpi: temp=54.5 mcu_temp: temp=35.4 sd_pos=5397 sysload=0.08 cputime=13.744 memavail=1629912 print_time=1742.427 buffer_time=3.610 print_stall=0 extruder: target=220 temp=220.1 pwm=0.320
Stats 1730.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=71307 bytes_read=86185 bytes_retransmit=9 bytes_invalid=0 send_seq=3475 receive_seq=3475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996495 heater_bed: target=60 temp=60.1 pwm=0.349 rpi: temp=56.0 mcu_temp: temp=35.2 sd_pos=5397 sysload=0.08 cputime=13.795 memavail=1630192 print_time=1742.427 buffer_time=2.609 print_stall=0 extruder: target=220 temp=220.2 pwm=0.290
Stats 1731.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=71892 bytes_read=86592 bytes_retransmit=9 bytes_invalid=0 send_seq=3496 receive_seq=3496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.1 pwm=0.300 rpi: temp=55.5 mcu_temp: temp=34.5 sd_pos=5457 sysload=0.08 cputime=13.855 memavail=1630028 print_time=1745.232 buffer_time=4.414 print_stall=0 extruder: target=220 temp=220.3 pwm=0.329
Stats 1732.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=72087 bytes_read=86974 bytes_retransmit=9 bytes_invalid=0 send_seq=3509 receive_seq=3509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996493 heater_bed: target=60 temp=60.2 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=35.2 sd_pos=5457 sysload=0.08 cputime=13.907 memavail=1629976 print_time=1745.232 buffer_time=3.413 print_stall=0 extruder: target=220 temp=220.3 pwm=0.379
Stats 1733.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=72313 bytes_read=87350 bytes_retransmit=9 bytes_invalid=0 send_seq=3524 receive_seq=3524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.1 pwm=0.075 rpi: temp=57.0 mcu_temp: temp=34.8 sd_pos=5457 sysload=0.07 cputime=13.962 memavail=1630340 print_time=1745.232 buffer_time=2.413 print_stall=0 extruder: target=220 temp=220.4 pwm=0.362
Stats 1734.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=72919 bytes_read=87742 bytes_retransmit=9 bytes_invalid=0 send_seq=3545 receive_seq=3545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.0 pwm=0.523 rpi: temp=55.5 mcu_temp: temp=34.9 sd_pos=5516 sysload=0.07 cputime=14.023 memavail=1630084 print_time=1748.037 buffer_time=4.217 print_stall=0 extruder: target=220 temp=220.5 pwm=0.297
Stats 1735.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000023 bytes_write=73119 bytes_read=88129 bytes_retransmit=9 bytes_invalid=0 send_seq=3559 receive_seq=3559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.1 pwm=0.047 rpi: temp=57.0 mcu_temp: temp=35.7 sd_pos=5516 sysload=0.07 cputime=14.077 memavail=1630084 print_time=1748.037 buffer_time=3.216 print_stall=0 extruder: target=220 temp=220.5 pwm=0.329
Stats 1736.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=73355 bytes_read=88525 bytes_retransmit=9 bytes_invalid=0 send_seq=3575 receive_seq=3575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.1 pwm=0.348 rpi: temp=56.0 mcu_temp: temp=35.0 sd_pos=5516 sysload=0.07 cputime=14.133 memavail=1630092 print_time=1748.037 buffer_time=2.215 print_stall=0 extruder: target=220 temp=220.6 pwm=0.246
Stats 1737.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=73959 bytes_read=88912 bytes_retransmit=9 bytes_invalid=0 send_seq=3595 receive_seq=3595 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.1 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=35.6 sd_pos=5575 sysload=0.07 cputime=14.191 memavail=1630340 print_time=1750.843 buffer_time=4.019 print_stall=0 extruder: target=220 temp=220.6 pwm=0.284
Stats 1738.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=74189 bytes_read=89309 bytes_retransmit=9 bytes_invalid=0 send_seq=3611 receive_seq=3611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.0 pwm=0.476 rpi: temp=55.5 mcu_temp: temp=35.4 sd_pos=5575 sysload=0.07 cputime=14.243 memavail=1630284 print_time=1750.843 buffer_time=3.019 print_stall=0 extruder: target=220 temp=220.5 pwm=0.326
Stats 1739.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=74379 bytes_read=89670 bytes_retransmit=9 bytes_invalid=0 send_seq=3623 receive_seq=3623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=60.0 pwm=0.557 rpi: temp=55.0 mcu_temp: temp=35.2 sd_pos=5575 sysload=0.07 cputime=14.280 memavail=1630020 print_time=1750.843 buffer_time=2.018 print_stall=0 extruder: target=220 temp=220.5 pwm=0.344
Stats 1740.8: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000013 mcu_task_stddev=0.000025 bytes_write=74989 bytes_read=90062 bytes_retransmit=9 bytes_invalid=0 send_seq=3644 receive_seq=3644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.1 pwm=0.071 rpi: temp=55.0 mcu_temp: temp=35.1 sd_pos=5634 sysload=0.07 cputime=14.342 memavail=1629752 print_time=1753.648 buffer_time=3.822 print_stall=0 extruder: target=220 temp=220.5 pwm=0.310
Stats 1741.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=75173 bytes_read=90459 bytes_retransmit=9 bytes_invalid=0 send_seq=3657 receive_seq=3657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996490 heater_bed: target=60 temp=60.0 pwm=0.550 rpi: temp=55.0 mcu_temp: temp=35.8 sd_pos=5634 sysload=0.07 cputime=14.397 memavail=1629748 print_time=1753.648 buffer_time=2.821 print_stall=0 extruder: target=220 temp=220.3 pwm=0.400
Stats 1742.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=75593 bytes_read=90855 bytes_retransmit=9 bytes_invalid=0 send_seq=3676 receive_seq=3676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.0 pwm=0.326 rpi: temp=56.0 mcu_temp: temp=35.5 sd_pos=5692 sysload=0.07 cputime=14.453 memavail=1629484 print_time=1753.966 buffer_time=2.139 print_stall=0 extruder: target=220 temp=220.3 pwm=0.423
Stats 1743.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=76121 bytes_read=91232 bytes_retransmit=9 bytes_invalid=0 send_seq=3694 receive_seq=3694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996491 heater_bed: target=60 temp=60.0 pwm=0.451 rpi: temp=55.0 mcu_temp: temp=35.3 sd_pos=5752 sysload=0.06 cputime=14.514 memavail=1629788 print_time=1756.173 buffer_time=3.345 print_stall=0 extruder: target=220 temp=220.2 pwm=0.452
Stats 1744.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=76333 bytes_read=91619 bytes_retransmit=9 bytes_invalid=0 send_seq=3708 receive_seq=3708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996489 heater_bed: target=60 temp=59.9 pwm=0.717 rpi: temp=55.0 mcu_temp: temp=35.4 sd_pos=5752 sysload=0.06 cputime=14.570 memavail=1629532 print_time=1756.173 buffer_time=2.345 print_stall=0 extruder: target=220 temp=220.3 pwm=0.397
Stats 1745.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=76891 bytes_read=92020 bytes_retransmit=9 bytes_invalid=0 send_seq=3728 receive_seq=3728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.1 pwm=0.025 rpi: temp=55.5 mcu_temp: temp=34.9 sd_pos=5812 sysload=0.06 cputime=14.630 memavail=1629512 print_time=1758.395 buffer_time=3.566 print_stall=0 extruder: target=220 temp=220.1 pwm=0.383
Stats 1746.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=77095 bytes_read=92397 bytes_retransmit=9 bytes_invalid=0 send_seq=3743 receive_seq=3743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.0 pwm=0.186 rpi: temp=55.0 mcu_temp: temp=34.7 sd_pos=5812 sysload=0.06 cputime=14.684 memavail=1629292 print_time=1758.395 buffer_time=2.565 print_stall=0 extruder: target=220 temp=219.9 pwm=0.444
Stats 1747.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=77649 bytes_read=92809 bytes_retransmit=9 bytes_invalid=0 send_seq=3762 receive_seq=3762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.0 pwm=0.186 rpi: temp=55.0 mcu_temp: temp=35.7 sd_pos=5872 sysload=0.06 cputime=14.745 memavail=1629564 print_time=1760.616 buffer_time=3.786 print_stall=0 extruder: target=220 temp=219.9 pwm=0.444
Stats 1748.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=77865 bytes_read=93185 bytes_retransmit=9 bytes_invalid=0 send_seq=3777 receive_seq=3777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.1 pwm=0.175 rpi: temp=55.0 mcu_temp: temp=35.6 sd_pos=5872 sysload=0.06 cputime=14.799 memavail=1629196 print_time=1760.616 buffer_time=2.786 print_stall=0 extruder: target=220 temp=219.8 pwm=0.508
Stats 1749.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=78434 bytes_read=93572 bytes_retransmit=9 bytes_invalid=0 send_seq=3797 receive_seq=3797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.1 pwm=0.137 rpi: temp=56.0 mcu_temp: temp=35.8 sd_pos=5909 sysload=0.06 cputime=14.842 memavail=1629248 print_time=1762.854 buffer_time=4.022 print_stall=0 extruder: target=220 temp=219.7 pwm=0.480
Stats 1750.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000029 bytes_write=78664 bytes_read=93969 bytes_retransmit=9 bytes_invalid=0 send_seq=3813 receive_seq=3813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=35.4 sd_pos=5909 sysload=0.06 cputime=14.899 memavail=1629184 print_time=1762.854 buffer_time=3.022 print_stall=0 extruder: target=220 temp=219.7 pwm=0.492
Stats 1751.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=78910 bytes_read=94370 bytes_retransmit=9 bytes_invalid=0 send_seq=3830 receive_seq=3830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=60 temp=60.0 pwm=0.252 rpi: temp=54.5 mcu_temp: temp=35.9 sd_pos=5909 sysload=0.06 cputime=14.954 memavail=1629408 print_time=1762.854 buffer_time=2.021 print_stall=0 extruder: target=220 temp=219.7 pwm=0.418
Stats 1752.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=80022 bytes_read=94802 bytes_retransmit=9 bytes_invalid=0 send_seq=3859 receive_seq=3859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.3 sd_pos=6062 sysload=0.06 cputime=15.020 memavail=1628924 print_time=1764.637 buffer_time=2.804 print_stall=0 extruder: target=220 temp=219.5 pwm=0.523
Stats 1753.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=80474 bytes_read=95209 bytes_retransmit=9 bytes_invalid=0 send_seq=3877 receive_seq=3877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.1 pwm=0.350 rpi: temp=55.5 mcu_temp: temp=35.6 sd_pos=6122 sysload=0.05 cputime=15.079 memavail=1629360 print_time=1765.710 buffer_time=2.876 print_stall=0 extruder: target=220 temp=219.5 pwm=0.574
Stats 1754.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=80992 bytes_read=95610 bytes_retransmit=9 bytes_invalid=0 send_seq=3897 receive_seq=3897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=60.1 pwm=0.247 rpi: temp=55.5 mcu_temp: temp=35.8 sd_pos=6241 sysload=0.05 cputime=15.135 memavail=1628840 print_time=1766.834 buffer_time=3.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.529
Stats 1755.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=81256 bytes_read=95967 bytes_retransmit=9 bytes_invalid=0 send_seq=3911 receive_seq=3911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=60 temp=60.1 pwm=0.062 rpi: temp=56.5 mcu_temp: temp=35.8 sd_pos=6241 sysload=0.05 cputime=15.173 memavail=1629096 print_time=1766.834 buffer_time=2.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.399
Stats 1756.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=82038 bytes_read=96419 bytes_retransmit=9 bytes_invalid=0 send_seq=3935 receive_seq=3935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996480 heater_bed: target=60 temp=60.1 pwm=0.079 rpi: temp=56.0 mcu_temp: temp=36.0 sd_pos=6450 sysload=0.05 cputime=15.231 memavail=1629104 print_time=1768.852 buffer_time=3.017 print_stall=0 extruder: target=220 temp=219.8 pwm=0.385
Stats 1757.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=82302 bytes_read=96790 bytes_retransmit=9 bytes_invalid=0 send_seq=3949 receive_seq=3949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=60 temp=60.1 pwm=0.449 rpi: temp=56.0 mcu_temp: temp=36.6 sd_pos=6450 sysload=0.05 cputime=15.270 memavail=1628868 print_time=1768.852 buffer_time=2.016 print_stall=0 extruder: target=220 temp=219.8 pwm=0.421
Stats 1758.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=83037 bytes_read=97187 bytes_retransmit=9 bytes_invalid=0 send_seq=3971 receive_seq=3971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=60.1 pwm=0.103 rpi: temp=55.0 mcu_temp: temp=35.6 sd_pos=6626 sysload=0.05 cputime=15.312 memavail=1629344 print_time=1770.762 buffer_time=2.925 print_stall=0 extruder: target=220 temp=219.7 pwm=0.519
Stats 1759.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=83520 bytes_read=97594 bytes_retransmit=9 bytes_invalid=0 send_seq=3989 receive_seq=3989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=60.0 pwm=0.650 rpi: temp=56.5 mcu_temp: temp=35.8 sd_pos=6682 sysload=0.05 cputime=15.367 memavail=1629548 print_time=1771.648 buffer_time=2.811 print_stall=0 extruder: target=220 temp=220.0 pwm=0.319
Stats 1760.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=84029 bytes_read=97985 bytes_retransmit=9 bytes_invalid=0 send_seq=4007 receive_seq=4007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=60.0 pwm=0.535 rpi: temp=56.0 mcu_temp: temp=35.9 sd_pos=6740 sysload=0.05 cputime=15.427 memavail=1629304 print_time=1772.595 buffer_time=2.758 print_stall=0 extruder: target=220 temp=219.9 pwm=0.434
Stats 1761.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=84521 bytes_read=98377 bytes_retransmit=9 bytes_invalid=0 send_seq=4025 receive_seq=4025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=60.0 pwm=0.177 rpi: temp=56.5 mcu_temp: temp=36.0 sd_pos=6798 sysload=0.05 cputime=15.471 memavail=1629512 print_time=1773.554 buffer_time=2.716 print_stall=0 extruder: target=220 temp=220.0 pwm=0.423
Stats 1762.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=85031 bytes_read=98799 bytes_retransmit=9 bytes_invalid=0 send_seq=4046 receive_seq=4046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=60.0 pwm=0.439 rpi: temp=55.0 mcu_temp: temp=35.2 sd_pos=6857 sysload=0.05 cputime=15.530 memavail=1629224 print_time=1774.536 buffer_time=2.698 print_stall=0 extruder: target=220 temp=220.1 pwm=0.380
Stats 1763.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=85551 bytes_read=99195 bytes_retransmit=9 bytes_invalid=0 send_seq=4065 receive_seq=4065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=60.1 pwm=0.076 rpi: temp=54.5 mcu_temp: temp=36.4 sd_pos=6917 sysload=0.04 cputime=15.589 memavail=1629056 print_time=1775.562 buffer_time=2.723 print_stall=0 extruder: target=220 temp=220.2 pwm=0.262
Stats 1764.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=86142 bytes_read=99582 bytes_retransmit=9 bytes_invalid=0 send_seq=4085 receive_seq=4085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=35.7 sd_pos=7006 sysload=0.04 cputime=15.649 memavail=1629048 print_time=1776.703 buffer_time=2.863 print_stall=0 extruder: target=220 temp=219.9 pwm=0.509
Stats 1765.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=86595 bytes_read=99999 bytes_retransmit=9 bytes_invalid=0 send_seq=4105 receive_seq=4105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=60 temp=60.1 pwm=0.178 rpi: temp=55.5 mcu_temp: temp=35.8 sd_pos=7066 sysload=0.04 cputime=15.706 memavail=1629044 print_time=1777.769 buffer_time=2.928 print_stall=0 extruder: target=220 temp=220.1 pwm=0.361
Stats 1766.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=87060 bytes_read=100390 bytes_retransmit=9 bytes_invalid=0 send_seq=4120 receive_seq=4120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996471 heater_bed: target=60 temp=60.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=36.3 sd_pos=7125 sysload=0.04 cputime=15.765 memavail=1629280 print_time=1778.890 buffer_time=3.048 print_stall=0 extruder: target=220 temp=220.0 pwm=0.477
Stats 1767.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=87335 bytes_read=100752 bytes_retransmit=9 bytes_invalid=0 send_seq=4135 receive_seq=4135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=60 temp=60.0 pwm=0.452 rpi: temp=55.0 mcu_temp: temp=36.0 sd_pos=7125 sysload=0.04 cputime=15.821 memavail=1628808 print_time=1778.890 buffer_time=2.047 print_stall=0 extruder: target=220 temp=220.1 pwm=0.353
Stats 1768.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=88164 bytes_read=101184 bytes_retransmit=9 bytes_invalid=0 send_seq=4158 receive_seq=4158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996473 heater_bed: target=60 temp=60.1 pwm=0.282 rpi: temp=56.0 mcu_temp: temp=36.2 sd_pos=7249 sysload=0.12 cputime=15.882 memavail=1629040 print_time=1780.270 buffer_time=2.426 print_stall=0 extruder: target=220 temp=220.0 pwm=0.498
Stats 1769.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=88859 bytes_read=101585 bytes_retransmit=9 bytes_invalid=0 send_seq=4178 receive_seq=4178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996470 heater_bed: target=60 temp=60.1 pwm=0.312 rpi: temp=56.0 mcu_temp: temp=35.9 sd_pos=7505 sysload=0.12 cputime=15.925 memavail=1629020 print_time=1780.987 buffer_time=2.142 print_stall=0 extruder: target=220 temp=220.1 pwm=0.455
Stats 1770.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=89486 bytes_read=101962 bytes_retransmit=9 bytes_invalid=0 send_seq=4196 receive_seq=4196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996474 heater_bed: target=60 temp=60.0 pwm=0.329 rpi: temp=55.5 mcu_temp: temp=36.0 sd_pos=7800 sysload=0.12 cputime=15.989 memavail=1629352 print_time=1782.060 buffer_time=2.214 print_stall=0 extruder: target=220 temp=220.2 pwm=0.399
Stats 1771.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=90287 bytes_read=102399 bytes_retransmit=9 bytes_invalid=0 send_seq=4217 receive_seq=4217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=60 temp=59.9 pwm=0.918 rpi: temp=55.0 mcu_temp: temp=36.4 sd_pos=8092 sysload=0.12 cputime=16.055 memavail=1629076 print_time=1782.961 buffer_time=2.115 print_stall=0 extruder: target=220 temp=220.0 pwm=0.452
Stats 1772.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=90944 bytes_read=102790 bytes_retransmit=9 bytes_invalid=0 send_seq=4235 receive_seq=4235 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=60.1 pwm=0.138 rpi: temp=56.0 mcu_temp: temp=36.1 sd_pos=8383 sysload=0.12 cputime=16.097 memavail=1629320 print_time=1783.868 buffer_time=2.021 print_stall=0 extruder: target=220 temp=220.0 pwm=0.499
Stats 1773.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=91675 bytes_read=103172 bytes_retransmit=9 bytes_invalid=0 send_seq=4254 receive_seq=4254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996477 heater_bed: target=60 temp=60.1 pwm=0.379 rpi: temp=55.5 mcu_temp: temp=35.7 sd_pos=8765 sysload=0.11 cputime=16.160 memavail=1629576 print_time=1785.165 buffer_time=2.317 print_stall=0 extruder: target=220 temp=220.0 pwm=0.417
Stats 1774.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=92429 bytes_read=103599 bytes_retransmit=9 bytes_invalid=0 send_seq=4276 receive_seq=4276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996477 heater_bed: target=60 temp=60.1 pwm=0.119 rpi: temp=55.0 mcu_temp: temp=36.4 sd_pos=9082 sysload=0.11 cputime=16.227 memavail=1629820 print_time=1785.895 buffer_time=2.046 print_stall=0 extruder: target=220 temp=219.9 pwm=0.532
Stats 1775.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=93068 bytes_read=103990 bytes_retransmit=9 bytes_invalid=0 send_seq=4294 receive_seq=4294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996476 heater_bed: target=60 temp=60.1 pwm=0.089 rpi: temp=55.0 mcu_temp: temp=36.5 sd_pos=9376 sysload=0.11 cputime=16.290 memavail=1630152 print_time=1787.002 buffer_time=2.153 print_stall=0 extruder: target=220 temp=220.3 pwm=0.290
Stats 1776.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=93674 bytes_read=104382 bytes_retransmit=9 bytes_invalid=0 send_seq=4312 receive_seq=4312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=60.0 pwm=0.352 rpi: temp=56.0 mcu_temp: temp=36.4 sd_pos=9641 sysload=0.11 cputime=16.350 memavail=1630156 print_time=1787.982 buffer_time=2.132 print_stall=0 extruder: target=220 temp=220.0 pwm=0.459
Stats 1777.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=94752 bytes_read=104839 bytes_retransmit=9 bytes_invalid=0 send_seq=4340 receive_seq=4340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996475 heater_bed: target=60 temp=60.0 pwm=0.435 rpi: temp=55.5 mcu_temp: temp=35.8 sd_pos=9924 sysload=0.11 cputime=16.415 memavail=1629896 print_time=1788.928 buffer_time=2.077 print_stall=0 extruder: target=220 temp=220.0 pwm=0.411
Stats 1778.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=95540 bytes_read=105240 bytes_retransmit=9 bytes_invalid=0 send_seq=4360 receive_seq=4360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996479 heater_bed: target=60 temp=60.1 pwm=0.192 rpi: temp=55.5 mcu_temp: temp=36.6 sd_pos=10070 sysload=0.10 cputime=16.474 memavail=1629896 print_time=1790.008 buffer_time=2.157 print_stall=0 extruder: target=220 temp=220.2 pwm=0.313
Stats 1779.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=96394 bytes_read=105628 bytes_retransmit=9 bytes_invalid=0 send_seq=4381 receive_seq=4381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996485 heater_bed: target=60 temp=60.1 pwm=0.160 rpi: temp=54.5 mcu_temp: temp=36.3 sd_pos=10212 sysload=0.10 cputime=16.530 memavail=1629948 print_time=1791.307 buffer_time=2.456 print_stall=0 extruder: target=220 temp=220.2 pwm=0.397
Stats 1780.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=96994 bytes_read=106033 bytes_retransmit=9 bytes_invalid=0 send_seq=4401 receive_seq=4401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996483 heater_bed: target=60 temp=60.1 pwm=0.268 rpi: temp=54.5 mcu_temp: temp=35.9 sd_pos=10272 sysload=0.10 cputime=16.589 memavail=1629444 print_time=1791.981 buffer_time=2.129 print_stall=0 extruder: target=220 temp=220.2 pwm=0.372
Stats 1781.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=97887 bytes_read=106453 bytes_retransmit=9 bytes_invalid=0 send_seq=4424 receive_seq=4424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.1 pwm=0.243 rpi: temp=55.0 mcu_temp: temp=36.3 sd_pos=10424 sysload=0.10 cputime=16.652 memavail=1629692 print_time=1793.430 buffer_time=2.577 print_stall=0 extruder: target=220 temp=220.3 pwm=0.320
Stats 1782.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=98519 bytes_read=106830 bytes_retransmit=9 bytes_invalid=0 send_seq=4444 receive_seq=4444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996487 heater_bed: target=60 temp=60.1 pwm=0.240 rpi: temp=54.5 mcu_temp: temp=36.6 sd_pos=10484 sysload=0.10 cputime=16.706 memavail=1629644 print_time=1794.179 buffer_time=2.325 print_stall=0 extruder: target=220 temp=220.2 pwm=0.332
Stats 1783.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=99111 bytes_read=107233 bytes_retransmit=9 bytes_invalid=0 send_seq=4462 receive_seq=4462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=59.9 pwm=0.616 rpi: temp=56.0 mcu_temp: temp=35.9 sd_pos=10546 sysload=0.09 cputime=16.762 memavail=1629380 print_time=1794.927 buffer_time=2.073 print_stall=0 extruder: target=220 temp=220.2 pwm=0.337
Stats 1784.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=100100 bytes_read=107659 bytes_retransmit=9 bytes_invalid=0 send_seq=4487 receive_seq=4487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996488 heater_bed: target=60 temp=60.0 pwm=0.480 rpi: temp=55.0 mcu_temp: temp=36.2 sd_pos=10697 sysload=0.09 cputime=16.828 memavail=1629376 print_time=1796.429 buffer_time=2.573 print_stall=0 extruder: target=220 temp=219.9 pwm=0.543
Stats 1785.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=100688 bytes_read=108056 bytes_retransmit=9 bytes_invalid=0 send_seq=4509 receive_seq=4509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=60.1 pwm=0.223 rpi: temp=55.0 mcu_temp: temp=36.4 sd_pos=10755 sysload=0.09 cputime=16.884 memavail=1629648 print_time=1797.154 buffer_time=2.297 print_stall=0 extruder: target=220 temp=220.1 pwm=0.369
Stats 1786.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=101289 bytes_read=108488 bytes_retransmit=9 bytes_invalid=0 send_seq=4529 receive_seq=4529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996486 heater_bed: target=60 temp=60.1 pwm=0.148 rpi: temp=55.5 mcu_temp: temp=36.6 sd_pos=10817 sysload=0.09 cputime=16.943 memavail=1629372 print_time=1797.862 buffer_time=2.004 print_stall=0 extruder: target=220 temp=220.2 pwm=0.283
Stats 1787.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=102203 bytes_read=108909 bytes_retransmit=9 bytes_invalid=0 send_seq=4553 receive_seq=4553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.1 pwm=0.088 rpi: temp=56.0 mcu_temp: temp=36.0 sd_pos=10999 sysload=0.09 cputime=16.987 memavail=1629644 print_time=1799.198 buffer_time=2.341 print_stall=0 extruder: target=220 temp=220.1 pwm=0.357
Stats 1788.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=102949 bytes_read=109311 bytes_retransmit=9 bytes_invalid=0 send_seq=4576 receive_seq=4576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996482 heater_bed: target=60 temp=60.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.7 sd_pos=11120 sysload=0.08 cputime=17.048 memavail=1629656 print_time=1800.356 buffer_time=2.498 print_stall=0 extruder: target=220 temp=220.1 pwm=0.420
Stats 1789.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=103617 bytes_read=109718 bytes_retransmit=9 bytes_invalid=0 send_seq=4594 receive_seq=4594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996484 heater_bed: target=60 temp=60.0 pwm=0.654 rpi: temp=56.0 mcu_temp: temp=37.1 sd_pos=11212 sysload=0.08 cputime=17.087 memavail=1629444 print_time=1800.893 buffer_time=2.036 print_stall=0 extruder: target=220 temp=220.0 pwm=0.420
Stats 1790.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=105442 bytes_read=110220 bytes_retransmit=9 bytes_invalid=0 send_seq=4632 receive_seq=4632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996478 heater_bed: target=55 temp=60.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=36.3 sd_pos=11805 sysload=0.08 cputime=17.160 memavail=1629220 print_time=1802.203 buffer_time=2.345 print_stall=0 extruder: target=215 temp=220.0 pwm=0.000
Stats 1791.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000068 bytes_write=106691 bytes_read=110662 bytes_retransmit=9 bytes_invalid=0 send_seq=4660 receive_seq=4660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=10 freq=71996478 heater_bed: target=55 temp=60.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=36.5 sd_pos=12236 sysload=0.08 cputime=17.202 memavail=1629220 print_time=1803.171 buffer_time=2.312 print_stall=0 extruder: target=215 temp=220.1 pwm=0.000
Stats 1792.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000068 bytes_write=108014 bytes_read=111124 bytes_retransmit=9 bytes_invalid=0 send_seq=4689 receive_seq=4689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996476 heater_bed: target=55 temp=60.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.5 sd_pos=12637 sysload=0.08 cputime=17.262 memavail=1628964 print_time=1804.078 buffer_time=2.219 print_stall=0 extruder: target=215 temp=220.1 pwm=0.000
Stats 1793.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000068 bytes_write=108991 bytes_read=111540 bytes_retransmit=9 bytes_invalid=0 send_seq=4712 receive_seq=4712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996474 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.3 sd_pos=12982 sysload=0.08 cputime=17.326 memavail=1629216 print_time=1805.131 buffer_time=2.272 print_stall=0 extruder: target=215 temp=220.1 pwm=0.000
Stats 1794.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000068 bytes_write=109610 bytes_read=111927 bytes_retransmit=9 bytes_invalid=0 send_seq=4732 receive_seq=4732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996472 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.0 sd_pos=13185 sysload=0.08 cputime=17.384 memavail=1628948 print_time=1805.972 buffer_time=2.112 print_stall=0 extruder: target=215 temp=219.6 pwm=0.136
Stats 1795.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000068 bytes_write=110020 bytes_read=112319 bytes_retransmit=9 bytes_invalid=0 send_seq=4747 receive_seq=4747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996471 heater_bed: target=55 temp=60.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.0 sd_pos=13245 sysload=0.08 cputime=17.441 memavail=1629212 print_time=1807.190 buffer_time=2.329 print_stall=0 extruder: target=215 temp=219.5 pwm=0.061
Stats 1796.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=110638 bytes_read=112735 bytes_retransmit=9 bytes_invalid=0 send_seq=4767 receive_seq=4767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.7 sd_pos=13364 sysload=0.08 cputime=17.500 memavail=1629468 print_time=1808.031 buffer_time=2.170 print_stall=0 extruder: target=215 temp=218.9 pwm=0.232
Stats 1797.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=111374 bytes_read=113122 bytes_retransmit=9 bytes_invalid=0 send_seq=4787 receive_seq=4787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=59.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=36.6 sd_pos=13554 sysload=0.08 cputime=17.558 memavail=1629232 print_time=1808.878 buffer_time=2.016 print_stall=0 extruder: target=215 temp=218.5 pwm=0.281
Stats 1798.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=112059 bytes_read=113539 bytes_retransmit=9 bytes_invalid=0 send_seq=4807 receive_seq=4807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=59.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.5 sd_pos=13614 sysload=0.07 cputime=17.612 memavail=1629736 print_time=1810.290 buffer_time=2.427 print_stall=0 extruder: target=215 temp=218.2 pwm=0.329
Stats 1799.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=112521 bytes_read=113930 bytes_retransmit=9 bytes_invalid=0 send_seq=4825 receive_seq=4825 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=59.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.1 sd_pos=13700 sysload=0.07 cputime=17.671 memavail=1629788 print_time=1811.517 buffer_time=2.653 print_stall=0 extruder: target=215 temp=217.8 pwm=0.272
Stats 1800.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=113215 bytes_read=114322 bytes_retransmit=9 bytes_invalid=0 send_seq=4846 receive_seq=4846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996472 heater_bed: target=55 temp=59.7 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=37.4 sd_pos=13757 sysload=0.07 cputime=17.711 memavail=1629868 print_time=1812.262 buffer_time=2.398 print_stall=0 extruder: target=215 temp=217.0 pwm=0.521
Stats 1801.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=113789 bytes_read=114749 bytes_retransmit=9 bytes_invalid=0 send_seq=4865 receive_seq=4865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996472 heater_bed: target=55 temp=59.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.1 sd_pos=13838 sysload=0.07 cputime=17.767 memavail=1629892 print_time=1813.030 buffer_time=2.165 print_stall=0 extruder: target=215 temp=216.8 pwm=0.405
Stats 1802.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=114564 bytes_read=115165 bytes_retransmit=9 bytes_invalid=0 send_seq=4888 receive_seq=4888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996470 heater_bed: target=55 temp=59.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.3 sd_pos=13924 sysload=0.07 cputime=17.832 memavail=1629584 print_time=1814.005 buffer_time=2.140 print_stall=0 extruder: target=215 temp=216.4 pwm=0.349
Stats 1803.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=115121 bytes_read=115547 bytes_retransmit=9 bytes_invalid=0 send_seq=4907 receive_seq=4907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=55 temp=59.5 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=37.4 sd_pos=14012 sysload=0.15 cputime=17.890 memavail=1629892 print_time=1814.928 buffer_time=2.062 print_stall=0 extruder: target=215 temp=216.0 pwm=0.385
Stats 1804.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=115670 bytes_read=115954 bytes_retransmit=9 bytes_invalid=0 send_seq=4925 receive_seq=4925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=55 temp=59.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.2 sd_pos=14131 sysload=0.15 cputime=17.949 memavail=1630092 print_time=1815.881 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.4 pwm=0.558
Stats 1805.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=116437 bytes_read=116360 bytes_retransmit=9 bytes_invalid=0 send_seq=4946 receive_seq=4946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996471 heater_bed: target=55 temp=59.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.2 sd_pos=14273 sysload=0.15 cputime=18.007 memavail=1629872 print_time=1817.433 buffer_time=2.565 print_stall=0 extruder: target=215 temp=215.1 pwm=0.520
Stats 1806.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=117174 bytes_read=116767 bytes_retransmit=9 bytes_invalid=0 send_seq=4967 receive_seq=4967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=55 temp=58.9 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=37.4 sd_pos=14338 sysload=0.15 cputime=18.063 memavail=1629604 print_time=1817.941 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.0 pwm=0.408
Stats 1807.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=118246 bytes_read=117228 bytes_retransmit=9 bytes_invalid=0 send_seq=4993 receive_seq=4993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996468 heater_bed: target=55 temp=58.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=36.8 sd_pos=14544 sysload=0.15 cputime=18.129 memavail=1629876 print_time=1819.056 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.6 pwm=0.501
Stats 1808.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=118811 bytes_read=117610 bytes_retransmit=9 bytes_invalid=0 send_seq=5012 receive_seq=5012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=58.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.6 sd_pos=14664 sysload=0.13 cputime=18.187 memavail=1629600 print_time=1820.074 buffer_time=2.205 print_stall=0 extruder: target=215 temp=214.4 pwm=0.519
Stats 1809.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=119709 bytes_read=118012 bytes_retransmit=9 bytes_invalid=0 send_seq=5035 receive_seq=5035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=58.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.1 sd_pos=15232 sysload=0.13 cputime=18.253 memavail=1629732 print_time=1821.150 buffer_time=2.281 print_stall=0 extruder: target=215 temp=214.1 pwm=0.594
Stats 1810.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=120333 bytes_read=118453 bytes_retransmit=9 bytes_invalid=0 send_seq=5057 receive_seq=5057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=58.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.5 sd_pos=15351 sysload=0.13 cputime=18.314 memavail=1629860 print_time=1821.890 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.2 pwm=0.469
Stats 1811.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=121273 bytes_read=118885 bytes_retransmit=9 bytes_invalid=0 send_seq=5083 receive_seq=5083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996468 heater_bed: target=55 temp=58.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.3 sd_pos=15526 sysload=0.13 cputime=18.376 memavail=1630128 print_time=1822.996 buffer_time=2.126 print_stall=0 extruder: target=215 temp=213.9 pwm=0.518
Stats 1812.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=122169 bytes_read=119292 bytes_retransmit=9 bytes_invalid=0 send_seq=5107 receive_seq=5107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=58.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.7 sd_pos=15761 sysload=0.13 cputime=18.436 memavail=1630148 print_time=1824.114 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.2 pwm=0.385
Stats 1813.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=122939 bytes_read=119728 bytes_retransmit=9 bytes_invalid=0 send_seq=5128 receive_seq=5128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=58.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=37.5 sd_pos=15907 sysload=0.12 cputime=18.494 memavail=1629924 print_time=1825.487 buffer_time=2.615 print_stall=0 extruder: target=215 temp=214.0 pwm=0.514
Stats 1814.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=123510 bytes_read=120110 bytes_retransmit=9 bytes_invalid=0 send_seq=5147 receive_seq=5147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=55 temp=58.3 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=37.7 sd_pos=15963 sysload=0.12 cputime=18.552 memavail=1629960 print_time=1826.085 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.0 pwm=0.502
Stats 1815.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=124016 bytes_read=120487 bytes_retransmit=9 bytes_invalid=0 send_seq=5165 receive_seq=5165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=58.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=38.0 sd_pos=16034 sysload=0.12 cputime=18.608 memavail=1629992 print_time=1826.920 buffer_time=2.047 print_stall=0 extruder: target=215 temp=214.1 pwm=0.408
Stats 1816.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=125198 bytes_read=120968 bytes_retransmit=9 bytes_invalid=0 send_seq=5192 receive_seq=5192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996464 heater_bed: target=55 temp=58.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.9 sd_pos=16262 sysload=0.12 cputime=18.672 memavail=1630184 print_time=1828.034 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.2 pwm=0.275
Stats 1817.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=125829 bytes_read=121355 bytes_retransmit=9 bytes_invalid=0 send_seq=5212 receive_seq=5212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=58.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.7 sd_pos=16406 sysload=0.12 cputime=18.727 memavail=1630216 print_time=1828.975 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.2 pwm=0.324
Stats 1818.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=126690 bytes_read=121752 bytes_retransmit=9 bytes_invalid=0 send_seq=5234 receive_seq=5234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=57.9 pwm=0.124 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=16580 sysload=0.19 cputime=18.787 memavail=1629932 print_time=1830.329 buffer_time=2.455 print_stall=0 extruder: target=215 temp=214.1 pwm=0.429
Stats 1819.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=127316 bytes_read=122183 bytes_retransmit=9 bytes_invalid=0 send_seq=5254 receive_seq=5254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=58.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.9 sd_pos=16695 sysload=0.19 cputime=18.825 memavail=1629712 print_time=1831.083 buffer_time=2.208 print_stall=0 extruder: target=215 temp=214.1 pwm=0.447
Stats 1820.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=128109 bytes_read=122585 bytes_retransmit=9 bytes_invalid=0 send_seq=5277 receive_seq=5277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996466 heater_bed: target=55 temp=57.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.7 sd_pos=16898 sysload=0.19 cputime=18.883 memavail=1629688 print_time=1832.030 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.1 pwm=0.459
Stats 1821.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=129355 bytes_read=123027 bytes_retransmit=9 bytes_invalid=0 send_seq=5305 receive_seq=5305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=57.7 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.2 sd_pos=17079 sysload=0.19 cputime=18.944 memavail=1629760 print_time=1833.477 buffer_time=2.601 print_stall=0 extruder: target=215 temp=214.1 pwm=0.469
Stats 1822.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=129933 bytes_read=123453 bytes_retransmit=9 bytes_invalid=0 send_seq=5324 receive_seq=5324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=57.4 pwm=0.132 rpi: temp=55.0 mcu_temp: temp=37.8 sd_pos=17169 sysload=0.19 cputime=19.003 memavail=1629948 print_time=1834.184 buffer_time=2.308 print_stall=0 extruder: target=215 temp=214.2 pwm=0.350
Stats 1823.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=130518 bytes_read=123835 bytes_retransmit=9 bytes_invalid=0 send_seq=5343 receive_seq=5343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996465 heater_bed: target=55 temp=57.2 pwm=0.176 rpi: temp=55.0 mcu_temp: temp=37.5 sd_pos=17254 sysload=0.18 cputime=19.062 memavail=1629668 print_time=1835.203 buffer_time=2.326 print_stall=0 extruder: target=215 temp=214.2 pwm=0.404
Stats 1824.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=131097 bytes_read=124232 bytes_retransmit=9 bytes_invalid=0 send_seq=5362 receive_seq=5362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=11 freq=71996464 heater_bed: target=55 temp=56.9 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=38.3 sd_pos=17367 sysload=0.18 cputime=19.114 memavail=1629700 print_time=1836.217 buffer_time=2.339 print_stall=0 extruder: target=215 temp=214.2 pwm=0.434
Stats 1825.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=131580 bytes_read=124628 bytes_retransmit=9 bytes_invalid=0 send_seq=5378 receive_seq=5378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996462 heater_bed: target=55 temp=57.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=37.7 sd_pos=17426 sysload=0.18 cputime=19.173 memavail=1629768 print_time=1836.881 buffer_time=2.002 print_stall=0 extruder: target=215 temp=214.0 pwm=0.505
Stats 1826.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=132723 bytes_read=125070 bytes_retransmit=9 bytes_invalid=0 send_seq=5406 receive_seq=5406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=55 temp=56.9 pwm=0.239 rpi: temp=56.0 mcu_temp: temp=38.0 sd_pos=17905 sysload=0.18 cputime=19.234 memavail=1629708 print_time=1837.978 buffer_time=2.099 print_stall=0 extruder: target=215 temp=214.3 pwm=0.316
Stats 1827.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=133697 bytes_read=125497 bytes_retransmit=9 bytes_invalid=0 send_seq=5431 receive_seq=5431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996463 heater_bed: target=55 temp=56.9 pwm=0.117 rpi: temp=56.0 mcu_temp: temp=38.0 sd_pos=18260 sysload=0.18 cputime=19.302 memavail=1629776 print_time=1838.899 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.3 pwm=0.389
Stats 1828.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=134746 bytes_read=125933 bytes_retransmit=9 bytes_invalid=0 send_seq=5455 receive_seq=5455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.6 sd_pos=18924 sysload=0.16 cputime=19.372 memavail=1629416 print_time=1839.986 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.3 pwm=0.433
Stats 1829.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=135483 bytes_read=126315 bytes_retransmit=9 bytes_invalid=0 send_seq=5474 receive_seq=5474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=19308 sysload=0.16 cputime=19.413 memavail=1629188 print_time=1840.909 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.2 pwm=0.417
Stats 1830.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=136248 bytes_read=126717 bytes_retransmit=9 bytes_invalid=0 send_seq=5494 receive_seq=5494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=56.9 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=37.8 sd_pos=19895 sysload=0.16 cputime=19.480 memavail=1629668 print_time=1841.916 buffer_time=2.034 print_stall=0 extruder: target=215 temp=214.3 pwm=0.391
Stats 1831.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000065 bytes_write=137015 bytes_read=127148 bytes_retransmit=9 bytes_invalid=0 send_seq=5514 receive_seq=5514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=20162 sysload=0.16 cputime=19.540 memavail=1629444 print_time=1842.909 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.3 pwm=0.409
Stats 1832.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000065 bytes_write=137683 bytes_read=127530 bytes_retransmit=9 bytes_invalid=0 send_seq=5533 receive_seq=5533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=37.7 sd_pos=20571 sysload=0.16 cputime=19.602 memavail=1629448 print_time=1843.900 buffer_time=2.017 print_stall=0 extruder: target=215 temp=214.4 pwm=0.398
Stats 1833.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000065 bytes_write=138668 bytes_read=127947 bytes_retransmit=9 bytes_invalid=0 send_seq=5556 receive_seq=5556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996461 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.2 sd_pos=21077 sysload=0.15 cputime=19.667 memavail=1629436 print_time=1845.116 buffer_time=2.233 print_stall=0 extruder: target=215 temp=214.3 pwm=0.398
Stats 1834.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000065 bytes_write=139442 bytes_read=128358 bytes_retransmit=9 bytes_invalid=0 send_seq=5575 receive_seq=5575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996464 heater_bed: target=55 temp=56.7 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=38.4 sd_pos=21217 sysload=0.15 cputime=19.726 memavail=1629684 print_time=1845.999 buffer_time=2.115 print_stall=0 extruder: target=215 temp=214.4 pwm=0.335
Stats 1835.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000065 bytes_write=140226 bytes_read=128755 bytes_retransmit=9 bytes_invalid=0 send_seq=5597 receive_seq=5597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=56.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=21360 sysload=0.15 cputime=19.782 memavail=1629948 print_time=1847.134 buffer_time=2.250 print_stall=0 extruder: target=215 temp=214.4 pwm=0.355
Stats 1836.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=141111 bytes_read=129182 bytes_retransmit=9 bytes_invalid=0 send_seq=5619 receive_seq=5619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996469 heater_bed: target=55 temp=56.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=21478 sysload=0.15 cputime=19.840 memavail=1629696 print_time=1848.425 buffer_time=2.541 print_stall=0 extruder: target=215 temp=214.3 pwm=0.452
Stats 1837.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=141625 bytes_read=129578 bytes_retransmit=9 bytes_invalid=0 send_seq=5635 receive_seq=5635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996468 heater_bed: target=55 temp=56.6 pwm=0.164 rpi: temp=56.0 mcu_temp: temp=38.0 sd_pos=21567 sysload=0.15 cputime=19.891 memavail=1629944 print_time=1849.127 buffer_time=2.242 print_stall=0 extruder: target=215 temp=214.2 pwm=0.569
Stats 1838.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=142517 bytes_read=129985 bytes_retransmit=9 bytes_invalid=0 send_seq=5659 receive_seq=5659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996467 heater_bed: target=55 temp=56.6 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.1 sd_pos=21684 sysload=0.14 cputime=19.946 memavail=1630432 print_time=1850.599 buffer_time=2.713 print_stall=0 extruder: target=215 temp=214.3 pwm=0.417
Stats 1839.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=143112 bytes_read=130363 bytes_retransmit=9 bytes_invalid=0 send_seq=5676 receive_seq=5676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996464 heater_bed: target=55 temp=56.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.0 sd_pos=21743 sysload=0.14 cputime=19.985 memavail=1630448 print_time=1851.359 buffer_time=2.472 print_stall=0 extruder: target=215 temp=214.4 pwm=0.408
Stats 1840.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=143627 bytes_read=130747 bytes_retransmit=9 bytes_invalid=0 send_seq=5692 receive_seq=5692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996463 heater_bed: target=55 temp=56.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.2 sd_pos=21804 sysload=0.14 cputime=20.039 memavail=1630448 print_time=1852.136 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.5 pwm=0.347
Stats 1841.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=144262 bytes_read=131154 bytes_retransmit=9 bytes_invalid=0 send_seq=5715 receive_seq=5715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=55 temp=56.4 pwm=0.249 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=21864 sysload=0.14 cputime=20.077 memavail=1630696 print_time=1852.930 buffer_time=2.043 print_stall=0 extruder: target=215 temp=214.5 pwm=0.442
Stats 1842.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=145246 bytes_read=131571 bytes_retransmit=9 bytes_invalid=0 send_seq=5740 receive_seq=5740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=56.3 pwm=0.062 rpi: temp=54.5 mcu_temp: temp=38.4 sd_pos=21985 sysload=0.14 cputime=20.136 memavail=1630912 print_time=1854.514 buffer_time=2.627 print_stall=0 extruder: target=215 temp=214.6 pwm=0.312
Stats 1843.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=145831 bytes_read=131982 bytes_retransmit=9 bytes_invalid=0 send_seq=5759 receive_seq=5759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=56.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=38.3 sd_pos=22046 sysload=0.13 cputime=20.173 memavail=1630736 print_time=1855.307 buffer_time=2.419 print_stall=0 extruder: target=215 temp=214.5 pwm=0.475
Stats 1844.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=146470 bytes_read=132379 bytes_retransmit=9 bytes_invalid=0 send_seq=5781 receive_seq=5781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=56.2 pwm=0.144 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=22134 sysload=0.13 cputime=20.226 memavail=1630920 print_time=1856.099 buffer_time=2.211 print_stall=0 extruder: target=215 temp=214.6 pwm=0.433
Stats 1845.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=147390 bytes_read=132801 bytes_retransmit=9 bytes_invalid=0 send_seq=5805 receive_seq=5805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=56.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.2 sd_pos=22256 sysload=0.13 cputime=20.283 memavail=1631220 print_time=1857.656 buffer_time=2.767 print_stall=0 extruder: target=215 temp=214.9 pwm=0.275
Stats 1846.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=147993 bytes_read=133217 bytes_retransmit=9 bytes_invalid=0 send_seq=5822 receive_seq=5822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=56.0 pwm=0.150 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=22318 sysload=0.13 cputime=20.337 memavail=1630924 print_time=1858.410 buffer_time=2.520 print_stall=0 extruder: target=215 temp=214.6 pwm=0.444
Stats 1847.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=148576 bytes_read=133609 bytes_retransmit=9 bytes_invalid=0 send_seq=5843 receive_seq=5843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=56.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.6 sd_pos=22378 sysload=0.13 cputime=20.391 memavail=1631204 print_time=1859.147 buffer_time=2.257 print_stall=0 extruder: target=215 temp=214.6 pwm=0.412
Stats 1848.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=149370 bytes_read=134021 bytes_retransmit=9 bytes_invalid=0 send_seq=5865 receive_seq=5865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996451 heater_bed: target=55 temp=56.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=22529 sysload=0.12 cputime=20.449 memavail=1630920 print_time=1860.556 buffer_time=2.666 print_stall=0 extruder: target=215 temp=214.5 pwm=0.469
Stats 1849.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=150002 bytes_read=134437 bytes_retransmit=9 bytes_invalid=0 send_seq=5885 receive_seq=5885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=55.9 pwm=0.366 rpi: temp=55.5 mcu_temp: temp=38.3 sd_pos=22591 sysload=0.12 cputime=20.490 memavail=1630988 print_time=1861.207 buffer_time=2.317 print_stall=0 extruder: target=215 temp=214.7 pwm=0.377
Stats 1850.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=150745 bytes_read=134834 bytes_retransmit=9 bytes_invalid=0 send_seq=5907 receive_seq=5907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996448 heater_bed: target=55 temp=55.7 pwm=0.447 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=22743 sysload=0.12 cputime=20.547 memavail=1631420 print_time=1862.394 buffer_time=2.503 print_stall=0 extruder: target=215 temp=214.6 pwm=0.485
Stats 1851.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=151304 bytes_read=135241 bytes_retransmit=9 bytes_invalid=0 send_seq=5925 receive_seq=5925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=55 temp=55.8 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=22805 sysload=0.12 cputime=20.602 memavail=1631240 print_time=1862.906 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.7 pwm=0.363
Stats 1852.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=152337 bytes_read=135693 bytes_retransmit=9 bytes_invalid=0 send_seq=5950 receive_seq=5950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.7 pwm=0.097 rpi: temp=55.5 mcu_temp: temp=38.5 sd_pos=23243 sysload=0.12 cputime=20.662 memavail=1630924 print_time=1863.990 buffer_time=2.098 print_stall=0 extruder: target=215 temp=214.6 pwm=0.512
Stats 1853.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=153637 bytes_read=136120 bytes_retransmit=9 bytes_invalid=0 send_seq=5978 receive_seq=5978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=55.7 pwm=0.092 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=23560 sysload=0.11 cputime=20.716 memavail=1630952 print_time=1865.162 buffer_time=2.269 print_stall=0 extruder: target=215 temp=214.7 pwm=0.399
Stats 1854.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=154688 bytes_read=136557 bytes_retransmit=9 bytes_invalid=0 send_seq=6005 receive_seq=6005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=10 freq=71996447 heater_bed: target=55 temp=55.6 pwm=0.151 rpi: temp=56.0 mcu_temp: temp=38.7 sd_pos=24037 sysload=0.11 cputime=20.777 memavail=1630936 print_time=1866.019 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.5 pwm=0.481
Stats 1855.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=156097 bytes_read=137033 bytes_retransmit=9 bytes_invalid=0 send_seq=6037 receive_seq=6037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=55.5 pwm=0.142 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=24559 sysload=0.11 cputime=20.843 memavail=1630948 print_time=1866.977 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.7 pwm=0.369
Stats 1856.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=157505 bytes_read=137500 bytes_retransmit=9 bytes_invalid=0 send_seq=6070 receive_seq=6070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.5 sd_pos=25105 sysload=0.11 cputime=20.906 memavail=1630712 print_time=1868.057 buffer_time=2.162 print_stall=0 extruder: target=215 temp=214.7 pwm=0.337
Stats 1857.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=158372 bytes_read=137912 bytes_retransmit=9 bytes_invalid=0 send_seq=6092 receive_seq=6092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996447 heater_bed: target=55 temp=55.4 pwm=0.215 rpi: temp=56.0 mcu_temp: temp=38.6 sd_pos=25308 sysload=0.11 cputime=20.964 memavail=1630432 print_time=1868.897 buffer_time=2.001 print_stall=0 extruder: target=215 temp=214.6 pwm=0.409
Stats 1858.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=159225 bytes_read=138343 bytes_retransmit=9 bytes_invalid=0 send_seq=6115 receive_seq=6115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=55.3 pwm=0.337 rpi: temp=55.5 mcu_temp: temp=38.4 sd_pos=25539 sysload=0.10 cputime=21.030 memavail=1629908 print_time=1870.987 buffer_time=3.090 print_stall=0 extruder: target=215 temp=214.6 pwm=0.376
Stats 1859.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=159467 bytes_read=138705 bytes_retransmit=9 bytes_invalid=0 send_seq=6130 receive_seq=6130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.3 pwm=0.489 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=25539 sysload=0.10 cputime=21.064 memavail=1630096 print_time=1870.987 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.3 pwm=0.601
Stats 1860.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=160196 bytes_read=139112 bytes_retransmit=9 bytes_invalid=0 send_seq=6151 receive_seq=6151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996456 heater_bed: target=55 temp=55.4 pwm=0.327 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=25719 sysload=0.10 cputime=21.119 memavail=1630064 print_time=1872.181 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.3 pwm=0.504
Stats 1861.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=161218 bytes_read=139563 bytes_retransmit=9 bytes_invalid=0 send_seq=6175 receive_seq=6175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=55.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=25984 sysload=0.10 cputime=21.179 memavail=1629844 print_time=1872.952 buffer_time=2.054 print_stall=0 extruder: target=215 temp=213.8 pwm=0.750
Stats 1862.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=162507 bytes_read=140000 bytes_retransmit=9 bytes_invalid=0 send_seq=6205 receive_seq=6205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=55 temp=55.2 pwm=0.585 rpi: temp=55.5 mcu_temp: temp=38.0 sd_pos=26396 sysload=0.10 cputime=21.238 memavail=1630116 print_time=1873.916 buffer_time=2.017 print_stall=0 extruder: target=215 temp=213.7 pwm=0.690
Stats 1863.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=164131 bytes_read=140482 bytes_retransmit=9 bytes_invalid=0 send_seq=6241 receive_seq=6241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996456 heater_bed: target=55 temp=55.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=27112 sysload=0.09 cputime=21.303 memavail=1630328 print_time=1875.092 buffer_time=2.193 print_stall=0 extruder: target=215 temp=213.5 pwm=0.636
Stats 1864.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=165182 bytes_read=140928 bytes_retransmit=9 bytes_invalid=0 send_seq=6267 receive_seq=6267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996456 heater_bed: target=55 temp=55.3 pwm=0.391 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=27206 sysload=0.09 cputime=21.360 memavail=1630360 print_time=1876.746 buffer_time=2.846 print_stall=0 extruder: target=215 temp=213.7 pwm=0.475
Stats 1865.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=165703 bytes_read=141310 bytes_retransmit=9 bytes_invalid=0 send_seq=6286 receive_seq=6286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=55 temp=55.4 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.5 sd_pos=27292 sysload=0.09 cputime=21.415 memavail=1630352 print_time=1877.973 buffer_time=3.072 print_stall=0 extruder: target=215 temp=213.3 pwm=0.637
Stats 1866.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=165870 bytes_read=141682 bytes_retransmit=9 bytes_invalid=0 send_seq=6297 receive_seq=6297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996453 heater_bed: target=55 temp=55.3 pwm=0.450 rpi: temp=56.0 mcu_temp: temp=38.1 sd_pos=27292 sysload=0.09 cputime=21.464 memavail=1630384 print_time=1877.973 buffer_time=2.072 print_stall=0 extruder: target=215 temp=213.3 pwm=0.576
Stats 1867.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=166775 bytes_read=142128 bytes_retransmit=9 bytes_invalid=0 send_seq=6323 receive_seq=6323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996452 heater_bed: target=55 temp=55.4 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=27405 sysload=0.09 cputime=21.523 memavail=1630308 print_time=1879.133 buffer_time=2.231 print_stall=0 extruder: target=215 temp=213.3 pwm=0.560
Stats 1868.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=167430 bytes_read=142510 bytes_retransmit=9 bytes_invalid=0 send_seq=6342 receive_seq=6342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=55 temp=55.3 pwm=0.250 rpi: temp=56.0 mcu_temp: temp=38.6 sd_pos=27488 sysload=0.08 cputime=21.581 memavail=1629964 print_time=1880.152 buffer_time=2.249 print_stall=0 extruder: target=215 temp=213.3 pwm=0.609
Stats 1869.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=168092 bytes_read=142907 bytes_retransmit=9 bytes_invalid=0 send_seq=6361 receive_seq=6361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996449 heater_bed: target=55 temp=55.2 pwm=0.315 rpi: temp=55.5 mcu_temp: temp=38.4 sd_pos=27604 sysload=0.08 cputime=21.618 memavail=1629716 print_time=1881.385 buffer_time=2.481 print_stall=0 extruder: target=215 temp=213.2 pwm=0.618
Stats 1870.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=168599 bytes_read=143313 bytes_retransmit=9 bytes_invalid=0 send_seq=6379 receive_seq=6379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=27693 sysload=0.08 cputime=21.674 memavail=1629468 print_time=1881.946 buffer_time=2.043 print_stall=0 extruder: target=215 temp=213.4 pwm=0.572
Stats 1871.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=169175 bytes_read=143710 bytes_retransmit=9 bytes_invalid=0 send_seq=6398 receive_seq=6398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.2 pwm=0.137 rpi: temp=56.5 mcu_temp: temp=38.4 sd_pos=27779 sysload=0.08 cputime=21.729 memavail=1629500 print_time=1882.965 buffer_time=2.061 print_stall=0 extruder: target=215 temp=213.6 pwm=0.480
Stats 1872.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=169817 bytes_read=144112 bytes_retransmit=9 bytes_invalid=0 send_seq=6418 receive_seq=6418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=55.2 pwm=0.182 rpi: temp=55.0 mcu_temp: temp=38.6 sd_pos=27906 sysload=0.08 cputime=21.783 memavail=1629216 print_time=1884.038 buffer_time=2.133 print_stall=0 extruder: target=215 temp=213.5 pwm=0.623
Stats 1873.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=171037 bytes_read=144573 bytes_retransmit=9 bytes_invalid=0 send_seq=6447 receive_seq=6447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=28079 sysload=0.08 cputime=21.844 memavail=1629012 print_time=1884.952 buffer_time=2.046 print_stall=0 extruder: target=215 temp=213.9 pwm=0.431
Stats 1874.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=172064 bytes_read=144990 bytes_retransmit=9 bytes_invalid=0 send_seq=6473 receive_seq=6473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=28281 sysload=0.08 cputime=21.903 memavail=1628960 print_time=1886.429 buffer_time=2.523 print_stall=0 extruder: target=215 temp=214.0 pwm=0.457
Stats 1875.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=172682 bytes_read=145382 bytes_retransmit=9 bytes_invalid=0 send_seq=6491 receive_seq=6491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=28481 sysload=0.08 cputime=21.958 memavail=1628960 print_time=1887.183 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.1 pwm=0.451
Stats 1876.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=173354 bytes_read=145813 bytes_retransmit=9 bytes_invalid=0 send_seq=6511 receive_seq=6511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.1 pwm=0.226 rpi: temp=54.5 mcu_temp: temp=38.5 sd_pos=28597 sysload=0.08 cputime=22.013 memavail=1629232 print_time=1887.940 buffer_time=2.032 print_stall=0 extruder: target=215 temp=214.0 pwm=0.548
Stats 1877.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=174297 bytes_read=146215 bytes_retransmit=9 bytes_invalid=0 send_seq=6534 receive_seq=6534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=55.1 pwm=0.086 rpi: temp=55.5 mcu_temp: temp=38.3 sd_pos=28971 sysload=0.08 cputime=22.074 memavail=1629008 print_time=1889.188 buffer_time=2.280 print_stall=0 extruder: target=215 temp=214.2 pwm=0.464
Stats 1878.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=174998 bytes_read=146627 bytes_retransmit=9 bytes_invalid=0 send_seq=6553 receive_seq=6553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=55.5 mcu_temp: temp=38.2 sd_pos=29377 sysload=0.07 cputime=22.135 memavail=1629264 print_time=1890.044 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.3 pwm=0.464
Stats 1879.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=175738 bytes_read=147033 bytes_retransmit=9 bytes_invalid=0 send_seq=6574 receive_seq=6574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=55.1 pwm=0.018 rpi: temp=55.5 mcu_temp: temp=37.9 sd_pos=29523 sysload=0.07 cputime=22.170 memavail=1629248 print_time=1891.094 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.3 pwm=0.520
Stats 1880.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=177046 bytes_read=147470 bytes_retransmit=9 bytes_invalid=0 send_seq=6604 receive_seq=6604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=29738 sysload=0.07 cputime=22.231 memavail=1629500 print_time=1892.174 buffer_time=2.266 print_stall=0 extruder: target=215 temp=214.3 pwm=0.536
Stats 1881.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=178038 bytes_read=147932 bytes_retransmit=9 bytes_invalid=0 send_seq=6630 receive_seq=6630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=56.0 mcu_temp: temp=38.6 sd_pos=30127 sysload=0.07 cputime=22.296 memavail=1629708 print_time=1893.478 buffer_time=2.569 print_stall=0 extruder: target=215 temp=214.4 pwm=0.490
Stats 1882.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=178810 bytes_read=148343 bytes_retransmit=9 bytes_invalid=0 send_seq=6652 receive_seq=6652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=55.0 mcu_temp: temp=38.6 sd_pos=30275 sysload=0.07 cputime=22.350 memavail=1629964 print_time=1894.297 buffer_time=2.388 print_stall=0 extruder: target=215 temp=214.3 pwm=0.593
Stats 1883.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=179500 bytes_read=148730 bytes_retransmit=9 bytes_invalid=0 send_seq=6672 receive_seq=6672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=38.8 sd_pos=30422 sysload=0.06 cputime=22.405 memavail=1629960 print_time=1895.068 buffer_time=2.158 print_stall=0 extruder: target=215 temp=214.5 pwm=0.496
Stats 1884.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=180374 bytes_read=149157 bytes_retransmit=9 bytes_invalid=0 send_seq=6694 receive_seq=6694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.0 sd_pos=30571 sysload=0.06 cputime=22.463 memavail=1629468 print_time=1896.442 buffer_time=2.532 print_stall=0 extruder: target=215 temp=214.5 pwm=0.489
Stats 1885.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=180868 bytes_read=149543 bytes_retransmit=9 bytes_invalid=0 send_seq=6711 receive_seq=6711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.5 sd_pos=30626 sysload=0.06 cputime=22.520 memavail=1629748 print_time=1897.040 buffer_time=2.129 print_stall=0 extruder: target=215 temp=214.5 pwm=0.472
Stats 1886.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=181599 bytes_read=149955 bytes_retransmit=9 bytes_invalid=0 send_seq=6733 receive_seq=6733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.9 pwm=0.033 rpi: temp=55.5 mcu_temp: temp=38.3 sd_pos=30721 sysload=0.06 cputime=22.575 memavail=1629720 print_time=1898.055 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.6 pwm=0.472
Stats 1887.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=182463 bytes_read=150382 bytes_retransmit=9 bytes_invalid=0 send_seq=6755 receive_seq=6755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=55.5 mcu_temp: temp=38.3 sd_pos=30871 sysload=0.06 cputime=22.634 memavail=1629440 print_time=1899.252 buffer_time=2.341 print_stall=0 extruder: target=215 temp=214.5 pwm=0.592
Stats 1888.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=183005 bytes_read=150778 bytes_retransmit=9 bytes_invalid=0 send_seq=6774 receive_seq=6774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.9 pwm=0.365 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=30930 sysload=0.06 cputime=22.691 memavail=1628988 print_time=1899.916 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.7 pwm=0.403
Stats 1889.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=183728 bytes_read=151170 bytes_retransmit=9 bytes_invalid=0 send_seq=6795 receive_seq=6795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.7 pwm=0.734 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=31042 sysload=0.06 cputime=22.726 memavail=1629260 print_time=1901.228 buffer_time=2.316 print_stall=0 extruder: target=215 temp=214.4 pwm=0.673
Stats 1890.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=184404 bytes_read=151592 bytes_retransmit=9 bytes_invalid=0 send_seq=6816 receive_seq=6816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=31161 sysload=0.06 cputime=22.784 memavail=1629228 print_time=1902.259 buffer_time=2.347 print_stall=0 extruder: target=215 temp=214.6 pwm=0.548
Stats 1891.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=185156 bytes_read=152013 bytes_retransmit=9 bytes_invalid=0 send_seq=6837 receive_seq=6837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.558 rpi: temp=55.5 mcu_temp: temp=38.2 sd_pos=31565 sysload=0.06 cputime=22.843 memavail=1629464 print_time=1903.120 buffer_time=2.208 print_stall=0 extruder: target=215 temp=214.5 pwm=0.615
Stats 1892.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=186373 bytes_read=152440 bytes_retransmit=9 bytes_invalid=0 send_seq=6865 receive_seq=6865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.531 rpi: temp=55.0 mcu_temp: temp=38.3 sd_pos=31737 sysload=0.06 cputime=22.898 memavail=1629488 print_time=1904.174 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.7 pwm=0.518
Stats 1893.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=186990 bytes_read=152847 bytes_retransmit=9 bytes_invalid=0 send_seq=6883 receive_seq=6883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=54.7 pwm=0.403 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=31852 sysload=0.13 cputime=22.952 memavail=1629180 print_time=1904.988 buffer_time=2.074 print_stall=0 extruder: target=215 temp=214.6 pwm=0.579
Stats 1894.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=187767 bytes_read=153258 bytes_retransmit=9 bytes_invalid=0 send_seq=6905 receive_seq=6905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=38.3 sd_pos=32112 sysload=0.13 cputime=23.011 memavail=1629676 print_time=1906.211 buffer_time=2.297 print_stall=0 extruder: target=215 temp=214.7 pwm=0.518
Stats 1895.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=188636 bytes_read=153660 bytes_retransmit=9 bytes_invalid=0 send_seq=6928 receive_seq=6928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=54.7 pwm=0.269 rpi: temp=54.5 mcu_temp: temp=38.5 sd_pos=32636 sysload=0.13 cputime=23.067 memavail=1629696 print_time=1907.080 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.6 pwm=0.518
Stats 1896.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=189338 bytes_read=154087 bytes_retransmit=9 bytes_invalid=0 send_seq=6947 receive_seq=6947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.8 pwm=0.191 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=33074 sysload=0.13 cputime=23.129 memavail=1629948 print_time=1907.967 buffer_time=2.052 print_stall=0 extruder: target=215 temp=214.8 pwm=0.435
Stats 1897.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=190456 bytes_read=154508 bytes_retransmit=9 bytes_invalid=0 send_seq=6971 receive_seq=6971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.6 pwm=0.715 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=33745 sysload=0.13 cputime=23.194 memavail=1630168 print_time=1909.099 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.8 pwm=0.433
Stats 1898.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=191123 bytes_read=154882 bytes_retransmit=9 bytes_invalid=0 send_seq=6989 receive_seq=6989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996445 heater_bed: target=55 temp=54.8 pwm=0.106 rpi: temp=56.5 mcu_temp: temp=37.9 sd_pos=34156 sysload=0.20 cputime=23.255 memavail=1630248 print_time=1910.001 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.0 pwm=0.322
Stats 1899.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=192131 bytes_read=155301 bytes_retransmit=9 bytes_invalid=0 send_seq=7012 receive_seq=7012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.7 pwm=0.372 rpi: temp=54.5 mcu_temp: temp=38.8 sd_pos=34836 sysload=0.20 cputime=23.299 memavail=1630212 print_time=1911.070 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.6 pwm=0.604
Stats 1900.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=192807 bytes_read=155686 bytes_retransmit=9 bytes_invalid=0 send_seq=7031 receive_seq=7031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.1 sd_pos=35186 sysload=0.20 cputime=23.363 memavail=1630252 print_time=1912.203 buffer_time=2.285 print_stall=0 extruder: target=215 temp=214.9 pwm=0.404
Stats 1901.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=193409 bytes_read=156063 bytes_retransmit=9 bytes_invalid=0 send_seq=7048 receive_seq=7048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=54.8 pwm=0.011 rpi: temp=55.0 mcu_temp: temp=38.1 sd_pos=35511 sysload=0.20 cputime=23.423 memavail=1629972 print_time=1913.052 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.0 pwm=0.440
Stats 1902.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=194659 bytes_read=156518 bytes_retransmit=9 bytes_invalid=0 send_seq=7077 receive_seq=7077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=55 temp=54.7 pwm=0.179 rpi: temp=55.5 mcu_temp: temp=38.5 sd_pos=36017 sysload=0.20 cputime=23.485 memavail=1630012 print_time=1914.294 buffer_time=2.376 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 1904.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=195426 bytes_read=156924 bytes_retransmit=9 bytes_invalid=0 send_seq=7098 receive_seq=7098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996443 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.1 sd_pos=36132 sysload=0.19 cputime=23.525 memavail=1629996 print_time=1915.210 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 1905.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=196241 bytes_read=157316 bytes_retransmit=9 bytes_invalid=0 send_seq=7119 receive_seq=7119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.6 pwm=0.374 rpi: temp=55.5 mcu_temp: temp=38.2 sd_pos=36278 sysload=0.19 cputime=23.582 memavail=1629988 print_time=1916.400 buffer_time=2.481 print_stall=0 extruder: target=215 temp=215.2 pwm=0.354
Stats 1906.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=196814 bytes_read=157728 bytes_retransmit=9 bytes_invalid=0 send_seq=7138 receive_seq=7138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=54.7 pwm=0.049 rpi: temp=56.0 mcu_temp: temp=38.3 sd_pos=36338 sysload=0.19 cputime=23.616 memavail=1630492 print_time=1917.049 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.1 pwm=0.552
Stats 1907.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=197719 bytes_read=158164 bytes_retransmit=9 bytes_invalid=0 send_seq=7162 receive_seq=7162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996439 heater_bed: target=55 temp=54.6 pwm=0.593 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=36481 sysload=0.19 cputime=23.671 memavail=1630512 print_time=1918.459 buffer_time=2.538 print_stall=0 extruder: target=215 temp=215.2 pwm=0.474
Stats 1908.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=198271 bytes_read=158546 bytes_retransmit=9 bytes_invalid=0 send_seq=7181 receive_seq=7181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=54.7 pwm=0.342 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=36538 sysload=0.19 cputime=23.724 memavail=1630732 print_time=1919.195 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.5 pwm=0.376
Stats 1909.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=198852 bytes_read=158953 bytes_retransmit=9 bytes_invalid=0 send_seq=7199 receive_seq=7199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=54.7 pwm=0.311 rpi: temp=56.0 mcu_temp: temp=38.4 sd_pos=36597 sysload=0.17 cputime=23.776 memavail=1630512 print_time=1919.948 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.4 pwm=0.502
Stats 1910.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=199763 bytes_read=159364 bytes_retransmit=9 bytes_invalid=0 send_seq=7221 receive_seq=7221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996442 heater_bed: target=55 temp=54.6 pwm=0.514 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=36747 sysload=0.17 cputime=23.813 memavail=1630228 print_time=1921.515 buffer_time=2.593 print_stall=0 extruder: target=215 temp=215.5 pwm=0.399
Stats 1911.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=200346 bytes_read=159746 bytes_retransmit=9 bytes_invalid=0 send_seq=7240 receive_seq=7240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996440 heater_bed: target=55 temp=54.7 pwm=0.330 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=36806 sysload=0.17 cputime=23.869 memavail=1630244 print_time=1922.296 buffer_time=2.374 print_stall=0 extruder: target=215 temp=215.4 pwm=0.510
Stats 1912.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=200947 bytes_read=160168 bytes_retransmit=9 bytes_invalid=0 send_seq=7258 receive_seq=7258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=54.7 pwm=0.349 rpi: temp=55.5 mcu_temp: temp=38.6 sd_pos=36867 sysload=0.17 cputime=23.923 memavail=1630288 print_time=1923.087 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.5 pwm=0.392
Stats 1913.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=201929 bytes_read=160594 bytes_retransmit=9 bytes_invalid=0 send_seq=7283 receive_seq=7283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.7 pwm=0.148 rpi: temp=55.5 mcu_temp: temp=38.2 sd_pos=37014 sysload=0.17 cputime=23.980 memavail=1630264 print_time=1924.669 buffer_time=2.745 print_stall=0 extruder: target=215 temp=215.4 pwm=0.503
Stats 1914.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=202494 bytes_read=160987 bytes_retransmit=9 bytes_invalid=0 send_seq=7302 receive_seq=7302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.7 pwm=0.134 rpi: temp=56.5 mcu_temp: temp=38.3 sd_pos=37073 sysload=0.16 cputime=24.031 memavail=1630044 print_time=1925.456 buffer_time=2.532 print_stall=0 extruder: target=215 temp=215.4 pwm=0.452
Stats 1915.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=203036 bytes_read=161389 bytes_retransmit=9 bytes_invalid=0 send_seq=7319 receive_seq=7319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.6 pwm=0.302 rpi: temp=55.5 mcu_temp: temp=38.5 sd_pos=37134 sysload=0.16 cputime=24.084 memavail=1629996 print_time=1926.228 buffer_time=2.303 print_stall=0 extruder: target=215 temp=215.3 pwm=0.452
Stats 1916.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=203618 bytes_read=161780 bytes_retransmit=9 bytes_invalid=0 send_seq=7337 receive_seq=7337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=38.5 sd_pos=37194 sysload=0.16 cputime=24.138 memavail=1630296 print_time=1926.983 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.2 pwm=0.561
Stats 1917.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=204566 bytes_read=162207 bytes_retransmit=9 bytes_invalid=0 send_seq=7362 receive_seq=7362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.6 pwm=0.619 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=37343 sysload=0.16 cputime=24.198 memavail=1630040 print_time=1928.453 buffer_time=2.528 print_stall=0 extruder: target=215 temp=215.4 pwm=0.425
Stats 1918.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=205133 bytes_read=162614 bytes_retransmit=9 bytes_invalid=0 send_seq=7380 receive_seq=7380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.6 pwm=0.435 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=37405 sysload=0.16 cputime=24.255 memavail=1630288 print_time=1929.132 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.3 pwm=0.391
Stats 1919.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=205985 bytes_read=163030 bytes_retransmit=9 bytes_invalid=0 send_seq=7403 receive_seq=7403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=54.7 pwm=0.316 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=37558 sysload=0.14 cputime=24.315 memavail=1630020 print_time=1930.402 buffer_time=2.475 print_stall=0 extruder: target=215 temp=215.2 pwm=0.468
Stats 1920.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=206522 bytes_read=163407 bytes_retransmit=9 bytes_invalid=0 send_seq=7421 receive_seq=7421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.7 pwm=0.246 rpi: temp=55.5 mcu_temp: temp=38.4 sd_pos=37620 sysload=0.14 cputime=24.370 memavail=1630024 print_time=1930.978 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.1 pwm=0.512
Stats 1921.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=207198 bytes_read=163819 bytes_retransmit=9 bytes_invalid=0 send_seq=7440 receive_seq=7440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.187 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=37773 sysload=0.14 cputime=24.429 memavail=1629692 print_time=1931.968 buffer_time=2.040 print_stall=0 extruder: target=215 temp=214.9 pwm=0.636
Stats 1922.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=208601 bytes_read=164285 bytes_retransmit=9 bytes_invalid=0 send_seq=7470 receive_seq=7470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.6 pwm=0.575 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=38519 sysload=0.14 cputime=24.466 memavail=1629220 print_time=1932.934 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.397
Stats 1923.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=209542 bytes_read=164692 bytes_retransmit=9 bytes_invalid=0 send_seq=7494 receive_seq=7494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.1 sd_pos=38664 sysload=0.14 cputime=24.525 memavail=1628884 print_time=1934.100 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 1924.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=209937 bytes_read=165079 bytes_retransmit=9 bytes_invalid=0 send_seq=7508 receive_seq=7508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.6 pwm=0.583 rpi: temp=55.0 mcu_temp: temp=38.3 sd_pos=38724 sysload=0.13 cputime=24.558 memavail=1629156 print_time=1935.026 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 1925.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=210558 bytes_read=165470 bytes_retransmit=9 bytes_invalid=0 send_seq=7526 receive_seq=7526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.7 pwm=0.280 rpi: temp=54.5 mcu_temp: temp=38.8 sd_pos=38839 sysload=0.13 cputime=24.612 memavail=1629468 print_time=1936.114 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 1926.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=211516 bytes_read=165854 bytes_retransmit=9 bytes_invalid=0 send_seq=7549 receive_seq=7549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.6 pwm=0.307 rpi: temp=55.5 mcu_temp: temp=38.0 sd_pos=39148 sysload=0.13 cputime=24.674 memavail=1629240 print_time=1937.275 buffer_time=2.345 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 1927.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=212429 bytes_read=166306 bytes_retransmit=9 bytes_invalid=0 send_seq=7573 receive_seq=7573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.2 sd_pos=39412 sysload=0.13 cputime=24.735 memavail=1629164 print_time=1938.313 buffer_time=2.382 print_stall=0 extruder: target=215 temp=214.9 pwm=0.623
Stats 1928.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=213394 bytes_read=166727 bytes_retransmit=9 bytes_invalid=0 send_seq=7597 receive_seq=7597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=39851 sysload=0.13 cputime=24.795 memavail=1629244 print_time=1939.006 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 1929.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=215099 bytes_read=167184 bytes_retransmit=9 bytes_invalid=0 send_seq=7632 receive_seq=7631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.6 pwm=0.594 rpi: temp=56.5 mcu_temp: temp=38.8 sd_pos=40530 sysload=0.12 cputime=24.860 memavail=1629228 print_time=1940.216 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.2 pwm=0.428
Stats 1930.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=216197 bytes_read=167608 bytes_retransmit=9 bytes_invalid=0 send_seq=7656 receive_seq=7656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.170 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=40851 sysload=0.12 cputime=24.900 memavail=1629236 print_time=1941.165 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.2 pwm=0.428
Stats 1931.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=217005 bytes_read=168019 bytes_retransmit=9 bytes_invalid=0 send_seq=7678 receive_seq=7678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.4 sd_pos=41031 sysload=0.12 cputime=24.960 memavail=1629000 print_time=1942.375 buffer_time=2.443 print_stall=0 extruder: target=215 temp=215.1 pwm=0.540
Stats 1932.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=217495 bytes_read=168411 bytes_retransmit=9 bytes_invalid=0 send_seq=7696 receive_seq=7696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.7 pwm=0.168 rpi: temp=54.5 mcu_temp: temp=39.0 sd_pos=41132 sysload=0.12 cputime=25.015 memavail=1629284 print_time=1943.592 buffer_time=2.660 print_stall=0 extruder: target=215 temp=215.1 pwm=0.517
Stats 1933.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=218078 bytes_read=168828 bytes_retransmit=9 bytes_invalid=0 send_seq=7716 receive_seq=7716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.6 pwm=0.316 rpi: temp=56.0 mcu_temp: temp=38.7 sd_pos=41303 sysload=0.12 cputime=25.070 memavail=1629328 print_time=1944.128 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.0 pwm=0.540
Stats 1934.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=218984 bytes_read=169249 bytes_retransmit=9 bytes_invalid=0 send_seq=7740 receive_seq=7740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996430 heater_bed: target=55 temp=54.6 pwm=0.373 rpi: temp=54.5 mcu_temp: temp=38.7 sd_pos=41576 sysload=0.11 cputime=25.128 memavail=1629560 print_time=1945.260 buffer_time=2.327 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 1935.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=219717 bytes_read=169646 bytes_retransmit=9 bytes_invalid=0 send_seq=7762 receive_seq=7762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996430 heater_bed: target=55 temp=54.7 pwm=0.316 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=41677 sysload=0.11 cputime=25.185 memavail=1629612 print_time=1946.570 buffer_time=2.636 print_stall=0 extruder: target=215 temp=215.1 pwm=0.491
Stats 1936.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=220242 bytes_read=170063 bytes_retransmit=9 bytes_invalid=0 send_seq=7782 receive_seq=7782 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.7 pwm=0.222 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=41819 sysload=0.11 cputime=25.245 memavail=1629624 print_time=1947.797 buffer_time=2.860 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 1937.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=220921 bytes_read=170479 bytes_retransmit=9 bytes_invalid=0 send_seq=7802 receive_seq=7802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=54.7 pwm=0.319 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=41877 sysload=0.11 cputime=25.284 memavail=1629376 print_time=1948.543 buffer_time=2.605 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 1938.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=221408 bytes_read=170851 bytes_retransmit=9 bytes_invalid=0 send_seq=7819 receive_seq=7819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.6 pwm=0.559 rpi: temp=54.5 mcu_temp: temp=38.8 sd_pos=41932 sysload=0.11 cputime=25.342 memavail=1629308 print_time=1948.957 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.9 pwm=0.593
Stats 1939.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=221979 bytes_read=171253 bytes_retransmit=9 bytes_invalid=0 send_seq=7837 receive_seq=7836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=54.6 pwm=0.421 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=42016 sysload=0.18 cputime=25.397 memavail=1629556 print_time=1949.975 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.431
Stats 1940.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=222658 bytes_read=171649 bytes_retransmit=9 bytes_invalid=0 send_seq=7856 receive_seq=7855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=71996423 heater_bed: target=55 temp=54.6 pwm=0.408 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=42131 sysload=0.18 cputime=25.435 memavail=1629556 print_time=1951.209 buffer_time=2.266 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 1941.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=223260 bytes_read=172031 bytes_retransmit=9 bytes_invalid=0 send_seq=7874 receive_seq=7874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.5 sd_pos=42247 sysload=0.18 cputime=25.494 memavail=1629560 print_time=1952.162 buffer_time=2.217 print_stall=0 extruder: target=215 temp=214.9 pwm=0.559
Stats 1942.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=223885 bytes_read=172463 bytes_retransmit=9 bytes_invalid=0 send_seq=7894 receive_seq=7894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.5 sd_pos=42332 sysload=0.18 cputime=25.553 memavail=1629828 print_time=1953.061 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 1943.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=224833 bytes_read=172884 bytes_retransmit=9 bytes_invalid=0 send_seq=7918 receive_seq=7918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.6 pwm=0.470 rpi: temp=55.5 mcu_temp: temp=38.6 sd_pos=42454 sysload=0.18 cputime=25.608 memavail=1629564 print_time=1954.221 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 1944.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=225650 bytes_read=173291 bytes_retransmit=9 bytes_invalid=0 send_seq=7942 receive_seq=7942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.6 pwm=0.401 rpi: temp=55.0 mcu_temp: temp=38.3 sd_pos=42602 sysload=0.18 cputime=25.643 memavail=1629832 print_time=1954.981 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 1945.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=226923 bytes_read=173768 bytes_retransmit=9 bytes_invalid=0 send_seq=7974 receive_seq=7974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=54.7 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=42902 sysload=0.25 cputime=25.684 memavail=1629316 print_time=1956.572 buffer_time=2.623 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 1946.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=227740 bytes_read=174184 bytes_retransmit=9 bytes_invalid=0 send_seq=7997 receive_seq=7997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=54.7 pwm=0.006 rpi: temp=55.0 mcu_temp: temp=38.4 sd_pos=43050 sysload=0.25 cputime=25.738 memavail=1629812 print_time=1957.391 buffer_time=2.442 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 1947.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=228404 bytes_read=174581 bytes_retransmit=9 bytes_invalid=0 send_seq=8016 receive_seq=8016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.7 pwm=0.106 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=43199 sysload=0.25 cputime=25.792 memavail=1629576 print_time=1958.162 buffer_time=2.211 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 1948.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=229252 bytes_read=175013 bytes_retransmit=9 bytes_invalid=0 send_seq=8039 receive_seq=8039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.7 pwm=0.197 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=43347 sysload=0.25 cputime=25.828 memavail=1629340 print_time=1959.536 buffer_time=2.583 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 1949.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=229764 bytes_read=175399 bytes_retransmit=9 bytes_invalid=0 send_seq=8056 receive_seq=8056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.7 pwm=0.187 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=43446 sysload=0.25 cputime=25.880 memavail=1628808 print_time=1960.134 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.9 pwm=0.553
Stats 1950.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=230277 bytes_read=175766 bytes_retransmit=9 bytes_invalid=0 send_seq=8072 receive_seq=8072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.7 pwm=0.351 rpi: temp=56.0 mcu_temp: temp=38.5 sd_pos=43550 sysload=0.31 cputime=25.917 memavail=1629328 print_time=1960.969 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 1951.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=231692 bytes_read=176243 bytes_retransmit=9 bytes_invalid=0 send_seq=8104 receive_seq=8104 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.6 pwm=0.373 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=43895 sysload=0.31 cputime=25.980 memavail=1629308 print_time=1962.514 buffer_time=2.557 print_stall=0 extruder: target=215 temp=214.6 pwm=0.687
Stats 1952.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=232403 bytes_read=176664 bytes_retransmit=9 bytes_invalid=0 send_seq=8126 receive_seq=8125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.7 pwm=0.253 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=44011 sysload=0.31 cputime=26.036 memavail=1629024 print_time=1963.270 buffer_time=2.313 print_stall=0 extruder: target=215 temp=215.2 pwm=0.305
Stats 1953.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=233192 bytes_read=177066 bytes_retransmit=9 bytes_invalid=0 send_seq=8148 receive_seq=8148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.8 pwm=0.033 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=44354 sysload=0.31 cputime=26.098 memavail=1629024 print_time=1964.189 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 1954.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=233834 bytes_read=177473 bytes_retransmit=9 bytes_invalid=0 send_seq=8166 receive_seq=8166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.8 pwm=0.180 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=44470 sysload=0.31 cputime=26.131 memavail=1629040 print_time=1965.022 buffer_time=2.063 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 1955.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=234686 bytes_read=177894 bytes_retransmit=9 bytes_invalid=0 send_seq=8190 receive_seq=8190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.8 pwm=0.309 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=44727 sysload=0.36 cputime=26.195 memavail=1629308 print_time=1966.222 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 1956.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=235381 bytes_read=178281 bytes_retransmit=9 bytes_invalid=0 send_seq=8210 receive_seq=8210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.354 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=44906 sysload=0.36 cputime=26.254 memavail=1629284 print_time=1967.275 buffer_time=2.312 print_stall=0 extruder: target=215 temp=215.2 pwm=0.427
Stats 1957.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=236613 bytes_read=178753 bytes_retransmit=9 bytes_invalid=0 send_seq=8238 receive_seq=8238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.6 sd_pos=45095 sysload=0.36 cputime=26.319 memavail=1629308 print_time=1968.726 buffer_time=2.761 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 1958.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=237058 bytes_read=179134 bytes_retransmit=9 bytes_invalid=0 send_seq=8254 receive_seq=8254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.7 pwm=0.556 rpi: temp=55.0 mcu_temp: temp=38.3 sd_pos=45157 sysload=0.36 cputime=26.356 memavail=1629040 print_time=1969.123 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.2 pwm=0.378
Stats 1959.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=237700 bytes_read=179510 bytes_retransmit=9 bytes_invalid=0 send_seq=8273 receive_seq=8273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.8 pwm=0.137 rpi: temp=54.5 mcu_temp: temp=38.9 sd_pos=45246 sysload=0.36 cputime=26.415 memavail=1629028 print_time=1970.098 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.1 pwm=0.520
Stats 1960.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=238240 bytes_read=179913 bytes_retransmit=9 bytes_invalid=0 send_seq=8290 receive_seq=8290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.6 sd_pos=45334 sysload=0.42 cputime=26.450 memavail=1629276 print_time=1971.098 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 1961.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=238871 bytes_read=180290 bytes_retransmit=9 bytes_invalid=0 send_seq=8310 receive_seq=8310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996437 heater_bed: target=55 temp=54.8 pwm=0.120 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=45452 sysload=0.42 cputime=26.508 memavail=1629020 print_time=1972.130 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.480
Stats 1962.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=240012 bytes_read=180717 bytes_retransmit=9 bytes_invalid=0 send_seq=8337 receive_seq=8337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.8 sd_pos=45717 sysload=0.42 cputime=26.570 memavail=1629044 print_time=1973.204 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 1963.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=240797 bytes_read=181150 bytes_retransmit=9 bytes_invalid=0 send_seq=8358 receive_seq=8358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.506 rpi: temp=54.0 mcu_temp: temp=38.8 sd_pos=46162 sysload=0.42 cputime=26.612 memavail=1629288 print_time=1974.082 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 1964.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=241903 bytes_read=181567 bytes_retransmit=9 bytes_invalid=0 send_seq=8384 receive_seq=8384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.8 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=38.9 sd_pos=46827 sysload=0.42 cputime=26.679 memavail=1629496 print_time=1975.157 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 1965.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=242687 bytes_read=181964 bytes_retransmit=9 bytes_invalid=0 send_seq=8406 receive_seq=8406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.6 pwm=0.682 rpi: temp=56.0 mcu_temp: temp=38.9 sd_pos=47298 sysload=0.46 cputime=26.740 memavail=1629268 print_time=1976.152 buffer_time=2.176 print_stall=0 extruder: target=215 temp=214.8 pwm=0.608
Stats 1966.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=243423 bytes_read=182400 bytes_retransmit=9 bytes_invalid=0 send_seq=8427 receive_seq=8427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.7 pwm=0.530 rpi: temp=55.5 mcu_temp: temp=38.8 sd_pos=47829 sysload=0.46 cputime=26.804 memavail=1629292 print_time=1977.042 buffer_time=2.064 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 1967.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=244261 bytes_read=182812 bytes_retransmit=9 bytes_invalid=0 send_seq=8449 receive_seq=8449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=54.7 pwm=0.247 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=48181 sysload=0.46 cputime=26.865 memavail=1629468 print_time=1978.067 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 1968.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=244916 bytes_read=183204 bytes_retransmit=9 bytes_invalid=0 send_seq=8467 receive_seq=8467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.9 pwm=0.060 rpi: temp=54.5 mcu_temp: temp=38.7 sd_pos=48588 sysload=0.46 cputime=26.926 memavail=1629504 print_time=1979.058 buffer_time=2.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 1969.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=245968 bytes_read=183630 bytes_retransmit=9 bytes_invalid=0 send_seq=8490 receive_seq=8489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.9 pwm=0.182 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=49071 sysload=0.46 cputime=26.989 memavail=1628424 print_time=1980.201 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 1970.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=247064 bytes_read=184047 bytes_retransmit=9 bytes_invalid=0 send_seq=8515 receive_seq=8515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.8 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=39.1 sd_pos=49302 sysload=0.59 cputime=27.029 memavail=1629196 print_time=1981.291 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.0 pwm=0.458
Stats 1971.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=247957 bytes_read=184474 bytes_retransmit=9 bytes_invalid=0 send_seq=8540 receive_seq=8540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=54.8 pwm=0.148 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=49450 sysload=0.59 cputime=27.087 memavail=1629448 print_time=1982.227 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 1972.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=248875 bytes_read=184925 bytes_retransmit=9 bytes_invalid=0 send_seq=8564 receive_seq=8564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.7 pwm=0.768 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=49596 sysload=0.59 cputime=27.144 memavail=1629412 print_time=1983.284 buffer_time=2.296 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 1973.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=249914 bytes_read=185347 bytes_retransmit=9 bytes_invalid=0 send_seq=8591 receive_seq=8591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=54.8 pwm=0.213 rpi: temp=56.0 mcu_temp: temp=38.8 sd_pos=49713 sysload=0.59 cputime=27.202 memavail=1629380 print_time=1984.400 buffer_time=2.410 print_stall=0 extruder: target=215 temp=215.0 pwm=0.515
Stats 1974.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=250924 bytes_read=185790 bytes_retransmit=9 bytes_invalid=0 send_seq=8617 receive_seq=8617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=54.8 pwm=0.463 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=49859 sysload=0.59 cputime=27.259 memavail=1629644 print_time=1985.582 buffer_time=2.591 print_stall=0 extruder: target=215 temp=215.0 pwm=0.524
Stats 1975.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=251525 bytes_read=186201 bytes_retransmit=9 bytes_invalid=0 send_seq=8636 receive_seq=8636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=54.8 pwm=0.353 rpi: temp=55.0 mcu_temp: temp=38.7 sd_pos=49917 sysload=0.70 cputime=27.313 memavail=1629444 print_time=1986.169 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.0 pwm=0.539
Stats 1976.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=252559 bytes_read=186623 bytes_retransmit=9 bytes_invalid=0 send_seq=8663 receive_seq=8663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=54.9 pwm=0.025 rpi: temp=56.0 mcu_temp: temp=38.6 sd_pos=50035 sysload=0.70 cputime=27.369 memavail=1629480 print_time=1987.361 buffer_time=2.367 print_stall=0 extruder: target=215 temp=215.0 pwm=0.420
Stats 1977.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=253587 bytes_read=187070 bytes_retransmit=9 bytes_invalid=0 send_seq=8689 receive_seq=8689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=50182 sysload=0.70 cputime=27.428 memavail=1629508 print_time=1988.546 buffer_time=2.551 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 1978.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=254194 bytes_read=187481 bytes_retransmit=9 bytes_invalid=0 send_seq=8708 receive_seq=8708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=54.8 pwm=0.534 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=50241 sysload=0.70 cputime=27.482 memavail=1629784 print_time=1989.123 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.6 pwm=0.687
Stats 1979.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=255249 bytes_read=187903 bytes_retransmit=9 bytes_invalid=0 send_seq=8735 receive_seq=8735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.7 pwm=0.671 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=50385 sysload=0.70 cputime=27.540 memavail=1629500 print_time=1990.238 buffer_time=2.239 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 1980.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=256165 bytes_read=188330 bytes_retransmit=9 bytes_invalid=0 send_seq=8760 receive_seq=8760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.8 pwm=0.316 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=50533 sysload=0.72 cputime=27.597 memavail=1629044 print_time=1991.277 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 1981.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=257072 bytes_read=188771 bytes_retransmit=9 bytes_invalid=0 send_seq=8785 receive_seq=8785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=50680 sysload=0.72 cputime=27.653 memavail=1628764 print_time=1992.200 buffer_time=2.196 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 1982.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=258547 bytes_read=189233 bytes_retransmit=9 bytes_invalid=0 send_seq=8818 receive_seq=8817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996430 heater_bed: target=55 temp=54.8 pwm=0.382 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=51233 sysload=0.72 cputime=27.714 memavail=1628872 print_time=1993.477 buffer_time=2.470 print_stall=0 extruder: target=215 temp=214.8 pwm=0.587
Stats 1983.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=259428 bytes_read=189675 bytes_retransmit=9 bytes_invalid=0 send_seq=8842 receive_seq=8842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.8 sd_pos=51724 sysload=0.72 cputime=27.778 memavail=1629352 print_time=1994.090 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 1984.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=260390 bytes_read=190101 bytes_retransmit=9 bytes_invalid=0 send_seq=8867 receive_seq=8867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.9 pwm=0.263 rpi: temp=56.0 mcu_temp: temp=38.5 sd_pos=52334 sysload=0.72 cputime=27.841 memavail=1629328 print_time=1995.134 buffer_time=2.123 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 1985.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=261430 bytes_read=190513 bytes_retransmit=9 bytes_invalid=0 send_seq=8892 receive_seq=8892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.8 pwm=0.715 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=53036 sysload=0.75 cputime=27.906 memavail=1629036 print_time=1996.066 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 1986.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=262355 bytes_read=190940 bytes_retransmit=9 bytes_invalid=0 send_seq=8914 receive_seq=8914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.9 pwm=0.129 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=53615 sysload=0.75 cputime=27.970 memavail=1629052 print_time=1997.165 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 1987.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=263219 bytes_read=191361 bytes_retransmit=9 bytes_invalid=0 send_seq=8935 receive_seq=8935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=54.9 pwm=0.245 rpi: temp=55.0 mcu_temp: temp=38.6 sd_pos=54075 sysload=0.75 cputime=28.032 memavail=1629044 print_time=1998.037 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 1988.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=264326 bytes_read=191778 bytes_retransmit=9 bytes_invalid=0 send_seq=8961 receive_seq=8961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=10 freq=71996436 heater_bed: target=55 temp=54.9 pwm=0.342 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=55065 sysload=0.75 cputime=28.101 memavail=1629308 print_time=1999.331 buffer_time=2.311 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 1989.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=264985 bytes_read=192190 bytes_retransmit=9 bytes_invalid=0 send_seq=8981 receive_seq=8980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=54.8 pwm=0.521 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=55442 sysload=0.75 cputime=28.157 memavail=1629296 print_time=2000.273 buffer_time=2.252 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 1990.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=266341 bytes_read=192661 bytes_retransmit=9 bytes_invalid=0 send_seq=9014 receive_seq=9014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=55706 sysload=0.85 cputime=28.196 memavail=1629056 print_time=2001.397 buffer_time=2.373 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 1991.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=267183 bytes_read=193053 bytes_retransmit=9 bytes_invalid=0 send_seq=9035 receive_seq=9035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.9 pwm=0.024 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=55823 sysload=0.85 cputime=28.252 memavail=1629028 print_time=2002.322 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 1992.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=268033 bytes_read=193495 bytes_retransmit=9 bytes_invalid=0 send_seq=9057 receive_seq=9057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=54.8 pwm=0.524 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=55969 sysload=0.85 cputime=28.308 memavail=1629292 print_time=2003.368 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 1993.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=269042 bytes_read=193921 bytes_retransmit=9 bytes_invalid=0 send_seq=9082 receive_seq=9082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=56086 sysload=0.85 cputime=28.364 memavail=1628892 print_time=2004.472 buffer_time=2.440 print_stall=0 extruder: target=215 temp=215.0 pwm=0.440
Stats 1994.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=269678 bytes_read=194308 bytes_retransmit=9 bytes_invalid=0 send_seq=9102 receive_seq=9102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=54.9 pwm=0.201 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=56145 sysload=0.85 cputime=28.415 memavail=1629156 print_time=2005.049 buffer_time=2.015 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 1995.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=270699 bytes_read=194755 bytes_retransmit=9 bytes_invalid=0 send_seq=9129 receive_seq=9128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=56287 sysload=0.86 cputime=28.471 memavail=1629120 print_time=2006.235 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 1996.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=271700 bytes_read=195196 bytes_retransmit=9 bytes_invalid=0 send_seq=9156 receive_seq=9156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.9 pwm=0.180 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=56403 sysload=0.86 cputime=28.528 memavail=1629136 print_time=2007.428 buffer_time=2.388 print_stall=0 extruder: target=215 temp=215.0 pwm=0.410
Stats 1997.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=272764 bytes_read=195628 bytes_retransmit=9 bytes_invalid=0 send_seq=9183 receive_seq=9182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=54.9 pwm=0.167 rpi: temp=56.0 mcu_temp: temp=38.9 sd_pos=56549 sysload=0.86 cputime=28.584 memavail=1629144 print_time=2008.617 buffer_time=2.575 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 1998.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=273325 bytes_read=196050 bytes_retransmit=9 bytes_invalid=0 send_seq=9203 receive_seq=9203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=54.9 pwm=0.406 rpi: temp=56.0 mcu_temp: temp=39.1 sd_pos=56607 sysload=0.86 cputime=28.634 memavail=1629196 print_time=2009.198 buffer_time=2.154 print_stall=0 extruder: target=215 temp=215.0 pwm=0.420
Stats 1999.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=274328 bytes_read=196481 bytes_retransmit=9 bytes_invalid=0 send_seq=9229 receive_seq=9229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=54.9 pwm=0.332 rpi: temp=56.0 mcu_temp: temp=38.7 sd_pos=56756 sysload=0.86 cputime=28.689 memavail=1629952 print_time=2010.319 buffer_time=2.272 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 2000.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=275307 bytes_read=196883 bytes_retransmit=9 bytes_invalid=0 send_seq=9253 receive_seq=9252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=54.8 pwm=0.394 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=56906 sysload=0.95 cputime=28.745 memavail=1629716 print_time=2011.370 buffer_time=2.319 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 2001.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=276255 bytes_read=197335 bytes_retransmit=9 bytes_invalid=0 send_seq=9280 receive_seq=9279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.8 pwm=0.573 rpi: temp=55.5 mcu_temp: temp=38.5 sd_pos=57056 sysload=0.95 cputime=28.801 memavail=1629456 print_time=2012.311 buffer_time=2.259 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 2002.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=277103 bytes_read=197771 bytes_retransmit=9 bytes_invalid=0 send_seq=9304 receive_seq=9303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.8 pwm=0.372 rpi: temp=54.5 mcu_temp: temp=39.1 sd_pos=57176 sysload=0.95 cputime=28.856 memavail=1629712 print_time=2013.104 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 2003.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=278499 bytes_read=198213 bytes_retransmit=9 bytes_invalid=0 send_seq=9334 receive_seq=9334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=54.8 pwm=0.372 rpi: temp=56.0 mcu_temp: temp=38.7 sd_pos=57671 sysload=0.95 cputime=28.915 memavail=1629296 print_time=2014.083 buffer_time=2.024 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 2004.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=279947 bytes_read=198695 bytes_retransmit=9 bytes_invalid=0 send_seq=9367 receive_seq=9367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=54.9 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=58056 sysload=0.95 cputime=28.972 memavail=1629260 print_time=2015.200 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 2005.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=281305 bytes_read=199151 bytes_retransmit=9 bytes_invalid=0 send_seq=9398 receive_seq=9398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=58543 sysload=1.12 cputime=29.012 memavail=1629248 print_time=2016.146 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 2006.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=282863 bytes_read=199608 bytes_retransmit=9 bytes_invalid=0 send_seq=9432 receive_seq=9432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.8 pwm=0.575 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=59448 sysload=1.12 cputime=29.080 memavail=1629084 print_time=2017.167 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 2007.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=283767 bytes_read=200059 bytes_retransmit=9 bytes_invalid=0 send_seq=9454 receive_seq=9453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.9 pwm=0.158 rpi: temp=55.0 mcu_temp: temp=38.6 sd_pos=59980 sysload=1.12 cputime=29.141 memavail=1629092 print_time=2018.373 buffer_time=2.305 print_stall=0 extruder: target=215 temp=215.2 pwm=0.339
Stats 2008.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=284782 bytes_read=200481 bytes_retransmit=9 bytes_invalid=0 send_seq=9480 receive_seq=9480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=54.8 pwm=0.495 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=60726 sysload=1.12 cputime=29.205 memavail=1629336 print_time=2019.126 buffer_time=2.058 print_stall=0 extruder: target=215 temp=214.9 pwm=0.511
Stats 2009.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=285772 bytes_read=200883 bytes_retransmit=9 bytes_invalid=0 send_seq=9503 receive_seq=9503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=54.8 pwm=0.274 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=61266 sysload=1.12 cputime=29.264 memavail=1629344 print_time=2020.366 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 2010.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=287219 bytes_read=201379 bytes_retransmit=9 bytes_invalid=0 send_seq=9537 receive_seq=9536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=10 freq=71996423 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=62274 sysload=1.11 cputime=29.314 memavail=1629524 print_time=2021.209 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.8 pwm=0.556
Stats 2011.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=287892 bytes_read=201766 bytes_retransmit=9 bytes_invalid=0 send_seq=9556 receive_seq=9556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.9 pwm=0.361 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=62596 sysload=1.11 cputime=29.375 memavail=1629104 print_time=2022.292 buffer_time=2.222 print_stall=0 extruder: target=215 temp=214.7 pwm=0.556
Stats 2012.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=288538 bytes_read=202168 bytes_retransmit=9 bytes_invalid=0 send_seq=9576 receive_seq=9576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996433 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=39.0 sd_pos=62890 sysload=1.11 cputime=29.437 memavail=1629356 print_time=2023.141 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.7 pwm=0.534
Stats 2013.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=289796 bytes_read=202649 bytes_retransmit=9 bytes_invalid=0 send_seq=9607 receive_seq=9606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=63369 sysload=1.11 cputime=29.502 memavail=1629036 print_time=2024.357 buffer_time=2.284 print_stall=0 extruder: target=215 temp=214.7 pwm=0.602
Stats 2014.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=290634 bytes_read=203056 bytes_retransmit=9 bytes_invalid=0 send_seq=9630 receive_seq=9630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=63542 sysload=1.11 cputime=29.561 memavail=1629004 print_time=2025.303 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.5 pwm=0.597
Stats 2015.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=291563 bytes_read=203458 bytes_retransmit=9 bytes_invalid=0 send_seq=9653 receive_seq=9653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=54.8 pwm=0.746 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=63689 sysload=1.10 cputime=29.616 memavail=1628932 print_time=2026.356 buffer_time=2.282 print_stall=0 extruder: target=215 temp=214.8 pwm=0.453
Stats 2016.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=292669 bytes_read=203929 bytes_retransmit=9 bytes_invalid=0 send_seq=9682 receive_seq=9681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996430 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=54.0 mcu_temp: temp=39.0 sd_pos=63836 sysload=1.10 cputime=29.673 memavail=1628908 print_time=2027.491 buffer_time=2.414 print_stall=0 extruder: target=215 temp=214.6 pwm=0.577
Stats 2017.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=293304 bytes_read=204336 bytes_retransmit=9 bytes_invalid=0 send_seq=9702 receive_seq=9702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996430 heater_bed: target=55 temp=54.8 pwm=0.708 rpi: temp=55.5 mcu_temp: temp=38.3 sd_pos=63895 sysload=1.10 cputime=29.729 memavail=1629448 print_time=2028.075 buffer_time=1.997 print_stall=0 extruder: target=215 temp=214.7 pwm=0.505
Stats 2018.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=294273 bytes_read=204757 bytes_retransmit=9 bytes_invalid=0 send_seq=9727 receive_seq=9726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=54.9 pwm=0.082 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=64070 sysload=1.10 cputime=29.783 memavail=1629668 print_time=2029.281 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 2019.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=295245 bytes_read=205186 bytes_retransmit=9 bytes_invalid=0 send_seq=9752 receive_seq=9751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=38.9 sd_pos=64217 sysload=1.10 cputime=29.840 memavail=1629688 print_time=2030.472 buffer_time=2.390 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 2020.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=296223 bytes_read=205583 bytes_retransmit=9 bytes_invalid=0 send_seq=9776 receive_seq=9775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.079 rpi: temp=54.5 mcu_temp: temp=38.7 sd_pos=64363 sysload=1.17 cputime=29.894 memavail=1629940 print_time=2031.665 buffer_time=2.581 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 2021.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=296880 bytes_read=205984 bytes_retransmit=9 bytes_invalid=0 send_seq=9797 receive_seq=9797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=54.9 pwm=0.329 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=64421 sysload=1.17 cputime=29.948 memavail=1629968 print_time=2032.254 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 2022.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=297895 bytes_read=206443 bytes_retransmit=9 bytes_invalid=0 send_seq=9825 receive_seq=9824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=54.9 pwm=0.335 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=64538 sysload=1.17 cputime=30.007 memavail=1630252 print_time=2033.396 buffer_time=2.308 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 2023.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=298870 bytes_read=206860 bytes_retransmit=9 bytes_invalid=0 send_seq=9850 receive_seq=9850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=54.8 pwm=0.452 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=64686 sysload=1.17 cputime=30.064 memavail=1630212 print_time=2034.478 buffer_time=2.389 print_stall=0 extruder: target=215 temp=214.7 pwm=0.568
Stats 2024.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=299809 bytes_read=207277 bytes_retransmit=9 bytes_invalid=0 send_seq=9874 receive_seq=9873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.1 sd_pos=64804 sysload=1.17 cputime=30.120 memavail=1629924 print_time=2035.457 buffer_time=2.366 print_stall=0 extruder: target=215 temp=214.8 pwm=0.493
Stats 2025.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=300657 bytes_read=207713 bytes_retransmit=9 bytes_invalid=0 send_seq=9898 receive_seq=9897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=38.8 sd_pos=64953 sysload=1.08 cputime=30.177 memavail=1630136 print_time=2036.298 buffer_time=2.207 print_stall=0 extruder: target=215 temp=215.0 pwm=0.423
Stats 2026.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=301734 bytes_read=208135 bytes_retransmit=9 bytes_invalid=0 send_seq=9924 receive_seq=9924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=65173 sysload=1.08 cputime=30.233 memavail=1630344 print_time=2037.148 buffer_time=2.055 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 2027.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000061 bytes_write=303277 bytes_read=208627 bytes_retransmit=9 bytes_invalid=0 send_seq=9959 receive_seq=9959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=65600 sysload=1.08 cputime=30.292 memavail=1630400 print_time=2038.984 buffer_time=2.889 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 2028.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000061 bytes_write=303735 bytes_read=209023 bytes_retransmit=9 bytes_invalid=0 send_seq=9975 receive_seq=9975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.552 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=65658 sysload=1.08 cputime=30.344 memavail=1630372 print_time=2040.202 buffer_time=3.106 print_stall=0 extruder: target=215 temp=214.8 pwm=0.588
Stats 2029.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000061 bytes_write=303968 bytes_read=209370 bytes_retransmit=9 bytes_invalid=0 send_seq=9987 receive_seq=9987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=54.5 mcu_temp: temp=39.1 sd_pos=65658 sysload=1.08 cputime=30.390 memavail=1629752 print_time=2040.202 buffer_time=2.105 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 2030.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000061 bytes_write=304440 bytes_read=209762 bytes_retransmit=9 bytes_invalid=0 send_seq=10005 receive_seq=10005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.9 pwm=0.591 rpi: temp=55.0 mcu_temp: temp=38.8 sd_pos=65718 sysload=1.15 cputime=30.422 memavail=1629748 print_time=2041.419 buffer_time=2.321 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 2031.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000061 bytes_write=305018 bytes_read=210194 bytes_retransmit=9 bytes_invalid=0 send_seq=10026 receive_seq=10026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=65838 sysload=1.15 cputime=30.478 memavail=1629488 print_time=2042.292 buffer_time=2.193 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 2032.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=306188 bytes_read=210626 bytes_retransmit=9 bytes_invalid=0 send_seq=10052 receive_seq=10052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=66195 sysload=1.15 cputime=30.538 memavail=1629520 print_time=2043.403 buffer_time=2.302 print_stall=0 extruder: target=215 temp=214.8 pwm=0.555
Stats 2033.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=307540 bytes_read=211083 bytes_retransmit=9 bytes_invalid=0 send_seq=10083 receive_seq=10083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=54.9 pwm=0.580 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=66695 sysload=1.15 cputime=30.601 memavail=1629760 print_time=2044.417 buffer_time=2.315 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 2034.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=308822 bytes_read=211544 bytes_retransmit=9 bytes_invalid=0 send_seq=10112 receive_seq=10112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=55.0 mcu_temp: temp=38.7 sd_pos=67143 sysload=1.15 cputime=30.664 memavail=1629520 print_time=2045.282 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.2 pwm=0.385
Stats 2035.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=309780 bytes_read=211951 bytes_retransmit=9 bytes_invalid=0 send_seq=10136 receive_seq=10136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=54.9 pwm=0.531 rpi: temp=54.0 mcu_temp: temp=39.1 sd_pos=67404 sysload=1.06 cputime=30.720 memavail=1629772 print_time=2046.217 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.4 pwm=0.330
Stats 2036.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=310717 bytes_read=212373 bytes_retransmit=9 bytes_invalid=0 send_seq=10160 receive_seq=10160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=54.8 pwm=0.831 rpi: temp=55.5 mcu_temp: temp=38.4 sd_pos=67919 sysload=1.06 cputime=30.777 memavail=1629768 print_time=2047.399 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.4 pwm=0.350
Stats 2037.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=311452 bytes_read=212799 bytes_retransmit=9 bytes_invalid=0 send_seq=10179 receive_seq=10179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=68213 sysload=1.06 cputime=30.834 memavail=1630008 print_time=2048.531 buffer_time=2.424 print_stall=0 extruder: target=215 temp=215.7 pwm=0.281
Stats 2038.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=311956 bytes_read=213171 bytes_retransmit=9 bytes_invalid=0 send_seq=10196 receive_seq=10196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.9 pwm=0.364 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=68327 sysload=1.06 cputime=30.885 memavail=1630004 print_time=2049.177 buffer_time=2.068 print_stall=0 extruder: target=215 temp=215.8 pwm=0.304
Stats 2039.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=312993 bytes_read=213623 bytes_retransmit=9 bytes_invalid=0 send_seq=10223 receive_seq=10223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.9 pwm=0.232 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=68470 sysload=1.06 cputime=30.942 memavail=1629532 print_time=2050.312 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.7 pwm=0.400
Stats 2040.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=313835 bytes_read=214039 bytes_retransmit=9 bytes_invalid=0 send_seq=10246 receive_seq=10246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=68787 sysload=1.13 cputime=31.001 memavail=1629544 print_time=2051.146 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.7 pwm=0.415
Stats 2041.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=315609 bytes_read=214516 bytes_retransmit=9 bytes_invalid=0 send_seq=10284 receive_seq=10284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=38.7 sd_pos=69468 sysload=1.13 cputime=31.072 memavail=1629300 print_time=2052.232 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.7 pwm=0.385
Stats 2042.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=316533 bytes_read=214963 bytes_retransmit=9 bytes_invalid=0 send_seq=10307 receive_seq=10307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=69580 sysload=1.13 cputime=31.128 memavail=1629312 print_time=2053.359 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.7 pwm=0.400
Stats 2043.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=317180 bytes_read=215354 bytes_retransmit=9 bytes_invalid=0 send_seq=10326 receive_seq=10325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.0 mcu_temp: temp=38.5 sd_pos=69663 sysload=1.13 cputime=31.186 memavail=1629308 print_time=2054.377 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.6 pwm=0.489
Stats 2044.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=317822 bytes_read=215741 bytes_retransmit=9 bytes_invalid=0 send_seq=10345 receive_seq=10345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=69779 sysload=1.13 cputime=31.241 memavail=1629028 print_time=2055.610 buffer_time=2.490 print_stall=0 extruder: target=215 temp=215.7 pwm=0.356
Stats 2045.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=318332 bytes_read=216148 bytes_retransmit=9 bytes_invalid=0 send_seq=10363 receive_seq=10363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=69869 sysload=1.04 cputime=31.298 memavail=1629056 print_time=2056.172 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.7 pwm=0.419
Stats 2046.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=318872 bytes_read=216534 bytes_retransmit=9 bytes_invalid=0 send_seq=10380 receive_seq=10380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=69954 sysload=1.04 cputime=31.354 memavail=1628804 print_time=2057.190 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.7 pwm=0.419
Stats 2047.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=319914 bytes_read=216961 bytes_retransmit=9 bytes_invalid=0 send_seq=10405 receive_seq=10405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=70104 sysload=1.04 cputime=31.414 memavail=1629064 print_time=2058.623 buffer_time=2.498 print_stall=0 extruder: target=215 temp=215.5 pwm=0.513
Stats 2048.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=320701 bytes_read=217393 bytes_retransmit=9 bytes_invalid=0 send_seq=10428 receive_seq=10428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=54.9 pwm=0.702 rpi: temp=54.0 mcu_temp: temp=39.1 sd_pos=70252 sysload=1.04 cputime=31.471 memavail=1629080 print_time=2059.383 buffer_time=2.256 print_stall=0 extruder: target=215 temp=215.6 pwm=0.403
Stats 2049.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=321513 bytes_read=217799 bytes_retransmit=9 bytes_invalid=0 send_seq=10449 receive_seq=10449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=54.9 pwm=0.589 rpi: temp=56.0 mcu_temp: temp=38.9 sd_pos=70402 sysload=1.04 cputime=31.527 memavail=1628776 print_time=2060.202 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.3 pwm=0.599
Stats 2050.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=322743 bytes_read=218226 bytes_retransmit=9 bytes_invalid=0 send_seq=10477 receive_seq=10477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.8 pwm=0.706 rpi: temp=55.0 mcu_temp: temp=38.6 sd_pos=70700 sysload=1.04 cputime=31.587 memavail=1629052 print_time=2061.793 buffer_time=2.662 print_stall=0 extruder: target=215 temp=215.3 pwm=0.547
Stats 2051.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=323443 bytes_read=218643 bytes_retransmit=9 bytes_invalid=0 send_seq=10498 receive_seq=10497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.0 mcu_temp: temp=38.7 sd_pos=70849 sysload=1.04 cputime=31.643 memavail=1629008 print_time=2062.564 buffer_time=2.431 print_stall=0 extruder: target=215 temp=215.3 pwm=0.502
Stats 2052.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=324079 bytes_read=219069 bytes_retransmit=9 bytes_invalid=0 send_seq=10519 receive_seq=10519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=54.9 pwm=0.497 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=70938 sysload=1.04 cputime=31.697 memavail=1628752 print_time=2063.273 buffer_time=2.139 print_stall=0 extruder: target=215 temp=215.2 pwm=0.555
Stats 2053.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=324747 bytes_read=219456 bytes_retransmit=9 bytes_invalid=0 send_seq=10540 receive_seq=10539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.0 pwm=0.001 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=71111 sysload=1.04 cputime=31.753 memavail=1628924 print_time=2064.184 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.3 pwm=0.466
Stats 2054.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=325513 bytes_read=219888 bytes_retransmit=9 bytes_invalid=0 send_seq=10562 receive_seq=10562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=71316 sysload=1.04 cputime=31.810 memavail=1628744 print_time=2065.454 buffer_time=2.316 print_stall=0 extruder: target=215 temp=215.1 pwm=0.508
Stats 2055.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=326597 bytes_read=220329 bytes_retransmit=9 bytes_invalid=0 send_seq=10590 receive_seq=10590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.426 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=71490 sysload=0.96 cputime=31.871 memavail=1628692 print_time=2066.274 buffer_time=2.135 print_stall=0 extruder: target=215 temp=215.3 pwm=0.462
Stats 2056.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=327566 bytes_read=220736 bytes_retransmit=9 bytes_invalid=0 send_seq=10614 receive_seq=10614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=71692 sysload=0.96 cputime=31.930 memavail=1628960 print_time=2067.801 buffer_time=2.662 print_stall=0 extruder: target=215 temp=215.1 pwm=0.545
Stats 2057.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=328259 bytes_read=221168 bytes_retransmit=9 bytes_invalid=0 send_seq=10635 receive_seq=10634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=53.6 mcu_temp: temp=39.4 sd_pos=71807 sysload=0.96 cputime=31.984 memavail=1628940 print_time=2068.555 buffer_time=2.415 print_stall=0 extruder: target=215 temp=215.2 pwm=0.458
Stats 2058.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=328832 bytes_read=221564 bytes_retransmit=9 bytes_invalid=0 send_seq=10653 receive_seq=10653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=54.9 pwm=0.395 rpi: temp=54.0 mcu_temp: temp=39.5 sd_pos=71926 sysload=0.96 cputime=32.037 memavail=1629228 print_time=2069.309 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.2 pwm=0.458
Stats 2059.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=329613 bytes_read=221961 bytes_retransmit=9 bytes_invalid=0 send_seq=10675 receive_seq=10675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=72107 sysload=0.96 cputime=32.093 memavail=1628892 print_time=2070.792 buffer_time=2.648 print_stall=0 extruder: target=215 temp=215.2 pwm=0.460
Stats 2060.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=330036 bytes_read=222353 bytes_retransmit=9 bytes_invalid=0 send_seq=10691 receive_seq=10690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=72200 sysload=0.96 cputime=32.142 memavail=1628916 print_time=2071.170 buffer_time=2.025 print_stall=0 extruder: target=215 temp=215.2 pwm=0.455
Stats 2061.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=331248 bytes_read=222814 bytes_retransmit=9 bytes_invalid=0 send_seq=10722 receive_seq=10722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=72388 sysload=0.96 cputime=32.203 memavail=1629228 print_time=2072.620 buffer_time=2.474 print_stall=0 extruder: target=215 temp=215.3 pwm=0.399
Stats 2062.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=331906 bytes_read=223201 bytes_retransmit=9 bytes_invalid=0 send_seq=10740 receive_seq=10739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=72481 sysload=0.96 cputime=32.258 memavail=1628980 print_time=2073.328 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.2 pwm=0.491
Stats 2063.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=332451 bytes_read=223618 bytes_retransmit=9 bytes_invalid=0 send_seq=10759 receive_seq=10759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=72569 sysload=0.96 cputime=32.318 memavail=1629196 print_time=2074.346 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.3 pwm=0.463
Stats 2064.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=333187 bytes_read=224019 bytes_retransmit=9 bytes_invalid=0 send_seq=10780 receive_seq=10779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=54.9 pwm=0.764 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=72685 sysload=0.96 cputime=32.377 memavail=1628940 print_time=2075.360 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.2 pwm=0.464
Stats 2065.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=333780 bytes_read=224406 bytes_retransmit=9 bytes_invalid=0 send_seq=10799 receive_seq=10799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=72807 sysload=0.88 cputime=32.431 memavail=1628988 print_time=2076.418 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.2 pwm=0.464
Stats 2066.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=334838 bytes_read=224858 bytes_retransmit=9 bytes_invalid=0 send_seq=10826 receive_seq=10826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=73238 sysload=0.88 cputime=32.487 memavail=1629236 print_time=2077.151 buffer_time=1.998 print_stall=0 extruder: target=215 temp=215.2 pwm=0.464
Stats 2067.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=335730 bytes_read=225299 bytes_retransmit=9 bytes_invalid=0 send_seq=10851 receive_seq=10851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=54.9 pwm=0.579 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=73855 sysload=0.88 cputime=32.554 memavail=1628908 print_time=2078.293 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.2 pwm=0.408
Stats 2068.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=337073 bytes_read=225731 bytes_retransmit=9 bytes_invalid=0 send_seq=10881 receive_seq=10880 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=74669 sysload=0.88 cputime=32.620 memavail=1628872 print_time=2079.429 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.2 pwm=0.387
Stats 2069.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=337721 bytes_read=226158 bytes_retransmit=9 bytes_invalid=0 send_seq=10902 receive_seq=10902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=75135 sysload=0.88 cputime=32.677 memavail=1628652 print_time=2080.232 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 2070.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=338807 bytes_read=226584 bytes_retransmit=9 bytes_invalid=0 send_seq=10927 receive_seq=10927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=75932 sysload=0.81 cputime=32.720 memavail=1628664 print_time=2081.232 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 2071.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=339521 bytes_read=226971 bytes_retransmit=9 bytes_invalid=0 send_seq=10948 receive_seq=10947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=76210 sysload=0.81 cputime=32.777 memavail=1628732 print_time=2082.223 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 2072.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=340521 bytes_read=227423 bytes_retransmit=9 bytes_invalid=0 send_seq=10972 receive_seq=10971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=77051 sysload=0.81 cputime=32.843 memavail=1628924 print_time=2083.405 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 2073.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=341793 bytes_read=227879 bytes_retransmit=9 bytes_invalid=0 send_seq=11002 receive_seq=11002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=10 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=77698 sysload=0.81 cputime=32.909 memavail=1628900 print_time=2084.457 buffer_time=2.297 print_stall=0 extruder: target=215 temp=214.9 pwm=0.444
Stats 2074.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=342623 bytes_read=228271 bytes_retransmit=9 bytes_invalid=0 send_seq=11024 receive_seq=11023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=54.9 pwm=0.522 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=77846 sysload=0.81 cputime=32.965 memavail=1629420 print_time=2085.188 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 2075.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=343789 bytes_read=228738 bytes_retransmit=9 bytes_invalid=0 send_seq=11053 receive_seq=11053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=78020 sysload=0.75 cputime=33.022 memavail=1629420 print_time=2086.619 buffer_time=2.456 print_stall=0 extruder: target=215 temp=215.0 pwm=0.467
Stats 2076.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=344378 bytes_read=229139 bytes_retransmit=9 bytes_invalid=0 send_seq=11073 receive_seq=11073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=78106 sysload=0.75 cputime=33.077 memavail=1629432 print_time=2087.161 buffer_time=1.999 print_stall=0 extruder: target=215 temp=215.0 pwm=0.405
Stats 2077.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=345377 bytes_read=229571 bytes_retransmit=9 bytes_invalid=0 send_seq=11099 receive_seq=11099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=78223 sysload=0.75 cputime=33.133 memavail=1629164 print_time=2088.267 buffer_time=2.102 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 2078.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=346448 bytes_read=230018 bytes_retransmit=9 bytes_invalid=0 send_seq=11126 receive_seq=11126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.1 pwm=0.152 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=78368 sysload=0.75 cputime=33.189 memavail=1629440 print_time=2089.437 buffer_time=2.270 print_stall=0 extruder: target=215 temp=214.8 pwm=0.515
Stats 2079.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=347427 bytes_read=230433 bytes_retransmit=9 bytes_invalid=0 send_seq=11151 receive_seq=11151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.1 pwm=0.050 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=78484 sysload=0.75 cputime=33.247 memavail=1629436 print_time=2090.653 buffer_time=2.485 print_stall=0 extruder: target=215 temp=214.8 pwm=0.447
Stats 2080.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=348037 bytes_read=230810 bytes_retransmit=9 bytes_invalid=0 send_seq=11171 receive_seq=11171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=78543 sysload=0.69 cputime=33.296 memavail=1629196 print_time=2091.266 buffer_time=2.098 print_stall=0 extruder: target=215 temp=214.8 pwm=0.435
Stats 2081.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=349112 bytes_read=231263 bytes_retransmit=9 bytes_invalid=0 send_seq=11199 receive_seq=11198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=78689 sysload=0.69 cputime=33.353 memavail=1629180 print_time=2092.499 buffer_time=2.330 print_stall=0 extruder: target=215 temp=214.9 pwm=0.379
Stats 2082.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=350111 bytes_read=231684 bytes_retransmit=9 bytes_invalid=0 send_seq=11223 receive_seq=11222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=78804 sysload=0.69 cputime=33.409 memavail=1629448 print_time=2093.710 buffer_time=2.541 print_stall=0 extruder: target=215 temp=214.9 pwm=0.466
Stats 2083.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=350718 bytes_read=232066 bytes_retransmit=9 bytes_invalid=0 send_seq=11242 receive_seq=11241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=78891 sysload=0.69 cputime=33.459 memavail=1628928 print_time=2094.318 buffer_time=2.146 print_stall=0 extruder: target=215 temp=214.9 pwm=0.414
Stats 2084.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=351694 bytes_read=232527 bytes_retransmit=9 bytes_invalid=0 send_seq=11268 receive_seq=11267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=54.9 pwm=0.700 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=79007 sysload=0.69 cputime=33.517 memavail=1629196 print_time=2095.426 buffer_time=2.253 print_stall=0 extruder: target=215 temp=214.7 pwm=0.533
Stats 2085.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=352617 bytes_read=232944 bytes_retransmit=9 bytes_invalid=0 send_seq=11293 receive_seq=11293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=79121 sysload=0.63 cputime=33.573 memavail=1628940 print_time=2096.445 buffer_time=2.271 print_stall=0 extruder: target=215 temp=214.7 pwm=0.609
Stats 2086.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=353547 bytes_read=233346 bytes_retransmit=9 bytes_invalid=0 send_seq=11317 receive_seq=11316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=79235 sysload=0.63 cputime=33.631 memavail=1628920 print_time=2097.311 buffer_time=2.134 print_stall=0 extruder: target=215 temp=214.9 pwm=0.414
Stats 2087.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=355031 bytes_read=233862 bytes_retransmit=9 bytes_invalid=0 send_seq=11351 receive_seq=11350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=79729 sysload=0.63 cputime=33.698 memavail=1628700 print_time=2098.827 buffer_time=2.650 print_stall=0 extruder: target=215 temp=214.7 pwm=0.584
Stats 2088.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=355457 bytes_read=234244 bytes_retransmit=9 bytes_invalid=0 send_seq=11369 receive_seq=11369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=79789 sysload=0.63 cputime=33.750 memavail=1629212 print_time=2099.462 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 2089.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=356305 bytes_read=234667 bytes_retransmit=9 bytes_invalid=0 send_seq=11392 receive_seq=11391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=79998 sysload=0.63 cputime=33.786 memavail=1628960 print_time=2100.641 buffer_time=2.461 print_stall=0 extruder: target=215 temp=214.9 pwm=0.544
Stats 2090.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=356922 bytes_read=235088 bytes_retransmit=9 bytes_invalid=0 send_seq=11412 receive_seq=11412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=80233 sysload=0.74 cputime=33.824 memavail=1628980 print_time=2101.314 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 2091.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=358116 bytes_read=235505 bytes_retransmit=9 bytes_invalid=0 send_seq=11439 receive_seq=11438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=80846 sysload=0.74 cputime=33.887 memavail=1628948 print_time=2102.292 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 2092.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=359021 bytes_read=235947 bytes_retransmit=9 bytes_invalid=0 send_seq=11463 receive_seq=11463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.490 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=81541 sysload=0.74 cputime=33.953 memavail=1628992 print_time=2103.233 buffer_time=2.048 print_stall=0 extruder: target=215 temp=215.2 pwm=0.309
Stats 2093.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=360118 bytes_read=236388 bytes_retransmit=9 bytes_invalid=0 send_seq=11488 receive_seq=11488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=82197 sysload=0.74 cputime=33.994 memavail=1628680 print_time=2104.278 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 2094.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=360983 bytes_read=236785 bytes_retransmit=9 bytes_invalid=0 send_seq=11510 receive_seq=11510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=54.9 pwm=0.610 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=82854 sysload=0.74 cputime=34.058 memavail=1629172 print_time=2105.217 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.8 pwm=0.596
Stats 2095.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=362047 bytes_read=237212 bytes_retransmit=9 bytes_invalid=0 send_seq=11535 receive_seq=11535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=83569 sysload=0.68 cputime=34.122 memavail=1628920 print_time=2106.415 buffer_time=2.226 print_stall=0 extruder: target=215 temp=214.8 pwm=0.489
Stats 2096.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=362702 bytes_read=237628 bytes_retransmit=9 bytes_invalid=0 send_seq=11556 receive_seq=11555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.0 pwm=0.382 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=83958 sysload=0.68 cputime=34.180 memavail=1629236 print_time=2107.263 buffer_time=2.074 print_stall=0 extruder: target=215 temp=214.7 pwm=0.541
Stats 2097.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=363745 bytes_read=238060 bytes_retransmit=9 bytes_invalid=0 send_seq=11581 receive_seq=11581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=10 freq=71996421 heater_bed: target=55 temp=55.1 pwm=0.067 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=84976 sysload=0.68 cputime=34.228 memavail=1629188 print_time=2108.369 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.7 pwm=0.541
Stats 2098.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=365013 bytes_read=238502 bytes_retransmit=9 bytes_invalid=0 send_seq=11610 receive_seq=11609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=85381 sysload=0.68 cputime=34.293 memavail=1629416 print_time=2109.268 buffer_time=2.075 print_stall=0 extruder: target=215 temp=214.6 pwm=0.541
Stats 2099.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=366086 bytes_read=238963 bytes_retransmit=9 bytes_invalid=0 send_seq=11638 receive_seq=11638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.0 pwm=0.439 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=85640 sysload=0.68 cputime=34.350 memavail=1629416 print_time=2110.385 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.6 pwm=0.545
Stats 2100.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=367074 bytes_read=239365 bytes_retransmit=9 bytes_invalid=0 send_seq=11662 receive_seq=11661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.1 pwm=0.122 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=85815 sysload=0.63 cputime=34.387 memavail=1629348 print_time=2111.297 buffer_time=2.099 print_stall=0 extruder: target=215 temp=214.5 pwm=0.581
Stats 2101.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=367960 bytes_read=239772 bytes_retransmit=9 bytes_invalid=0 send_seq=11683 receive_seq=11682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.9 pwm=0.673 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=85932 sysload=0.63 cputime=34.442 memavail=1629356 print_time=2112.296 buffer_time=2.097 print_stall=0 extruder: target=215 temp=214.5 pwm=0.581
Stats 2102.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=368976 bytes_read=240233 bytes_retransmit=9 bytes_invalid=0 send_seq=11709 receive_seq=11708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=86079 sysload=0.63 cputime=34.499 memavail=1629644 print_time=2113.399 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.4 pwm=0.514
Stats 2103.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=369915 bytes_read=240645 bytes_retransmit=9 bytes_invalid=0 send_seq=11733 receive_seq=11733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=86196 sysload=0.63 cputime=34.557 memavail=1629728 print_time=2114.551 buffer_time=2.350 print_stall=0 extruder: target=215 temp=214.4 pwm=0.539
Stats 2104.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=370994 bytes_read=241077 bytes_retransmit=9 bytes_invalid=0 send_seq=11760 receive_seq=11759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=86344 sysload=0.63 cputime=34.615 memavail=1629720 print_time=2115.744 buffer_time=2.543 print_stall=0 extruder: target=215 temp=214.4 pwm=0.558
Stats 2105.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=371562 bytes_read=241493 bytes_retransmit=9 bytes_invalid=0 send_seq=11779 receive_seq=11779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=86403 sysload=0.58 cputime=34.665 memavail=1629464 print_time=2116.342 buffer_time=2.139 print_stall=0 extruder: target=215 temp=214.3 pwm=0.568
Stats 2106.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=372586 bytes_read=241905 bytes_retransmit=9 bytes_invalid=0 send_seq=11804 receive_seq=11804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=54.9 pwm=0.738 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=86550 sysload=0.58 cputime=34.721 memavail=1629544 print_time=2117.552 buffer_time=2.349 print_stall=0 extruder: target=215 temp=214.4 pwm=0.510
Stats 2107.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=373646 bytes_read=242347 bytes_retransmit=9 bytes_invalid=0 send_seq=11830 receive_seq=11829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=86667 sysload=0.58 cputime=34.776 memavail=1629488 print_time=2118.705 buffer_time=2.500 print_stall=0 extruder: target=215 temp=214.2 pwm=0.562
Stats 2108.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=374202 bytes_read=242763 bytes_retransmit=9 bytes_invalid=0 send_seq=11849 receive_seq=11849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=86724 sysload=0.58 cputime=34.827 memavail=1629748 print_time=2119.271 buffer_time=2.064 print_stall=0 extruder: target=215 temp=214.3 pwm=0.562
Stats 2109.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=375163 bytes_read=243170 bytes_retransmit=9 bytes_invalid=0 send_seq=11873 receive_seq=11873 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=86872 sysload=0.58 cputime=34.860 memavail=1629496 print_time=2120.354 buffer_time=2.146 print_stall=0 extruder: target=215 temp=214.2 pwm=0.671
Stats 2110.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=376152 bytes_read=243607 bytes_retransmit=9 bytes_invalid=0 send_seq=11898 receive_seq=11897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=86987 sysload=0.53 cputime=34.917 memavail=1629472 print_time=2121.334 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.5 pwm=0.435
Stats 2111.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=377298 bytes_read=244058 bytes_retransmit=9 bytes_invalid=0 send_seq=11927 receive_seq=11927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.284 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=87225 sysload=0.53 cputime=34.976 memavail=1629268 print_time=2122.550 buffer_time=2.338 print_stall=0 extruder: target=215 temp=214.5 pwm=0.456
Stats 2112.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=378846 bytes_read=244540 bytes_retransmit=9 bytes_invalid=0 send_seq=11963 receive_seq=11963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.0 pwm=0.047 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=87718 sysload=0.53 cputime=35.037 memavail=1629252 print_time=2124.479 buffer_time=3.267 print_stall=0 extruder: target=215 temp=214.5 pwm=0.479
Stats 2113.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=379069 bytes_read=244922 bytes_retransmit=9 bytes_invalid=0 send_seq=11976 receive_seq=11976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=87718 sysload=0.53 cputime=35.067 memavail=1629000 print_time=2124.479 buffer_time=2.266 print_stall=0 extruder: target=215 temp=214.5 pwm=0.555
Stats 2114.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=379489 bytes_read=245303 bytes_retransmit=9 bytes_invalid=0 send_seq=11992 receive_seq=11992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=54.8 pwm=0.803 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=87776 sysload=0.53 cputime=35.120 memavail=1629012 print_time=2125.697 buffer_time=2.482 print_stall=0 extruder: target=215 temp=214.5 pwm=0.538
Stats 2115.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=379956 bytes_read=245675 bytes_retransmit=9 bytes_invalid=0 send_seq=12009 receive_seq=12009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.9 pwm=0.359 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=87836 sysload=0.49 cputime=35.172 memavail=1629236 print_time=2126.915 buffer_time=2.699 print_stall=0 extruder: target=215 temp=214.7 pwm=0.441
Stats 2116.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=380367 bytes_read=246072 bytes_retransmit=9 bytes_invalid=0 send_seq=12025 receive_seq=12025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.042 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=87896 sysload=0.49 cputime=35.225 memavail=1629004 print_time=2127.368 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.7 pwm=0.465
Stats 2117.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=381120 bytes_read=246488 bytes_retransmit=9 bytes_invalid=0 send_seq=12045 receive_seq=12045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=54.8 pwm=0.880 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=88106 sysload=0.49 cputime=35.280 memavail=1629252 print_time=2128.447 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.8 pwm=0.465
Stats 2118.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=382270 bytes_read=246905 bytes_retransmit=9 bytes_invalid=0 send_seq=12071 receive_seq=12071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=88431 sysload=0.49 cputime=35.338 memavail=1629256 print_time=2129.274 buffer_time=2.055 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 2119.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=383660 bytes_read=247367 bytes_retransmit=9 bytes_invalid=0 send_seq=12100 receive_seq=12100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=89001 sysload=0.49 cputime=35.396 memavail=1629352 print_time=2130.243 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.2 pwm=0.413
Stats 2120.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=385568 bytes_read=247863 bytes_retransmit=9 bytes_invalid=0 send_seq=12140 receive_seq=12139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=89437 sysload=0.45 cputime=35.440 memavail=1629592 print_time=2131.738 buffer_time=2.516 print_stall=0 extruder: target=215 temp=215.2 pwm=0.475
Stats 2121.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=386024 bytes_read=248235 bytes_retransmit=9 bytes_invalid=0 send_seq=12156 receive_seq=12156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=89639 sysload=0.45 cputime=35.494 memavail=1629888 print_time=2132.441 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.4 pwm=0.423
Stats 2122.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=387318 bytes_read=248717 bytes_retransmit=9 bytes_invalid=0 send_seq=12186 receive_seq=12186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=54.9 pwm=0.539 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=90126 sysload=0.45 cputime=35.558 memavail=1629708 print_time=2133.438 buffer_time=2.214 print_stall=0 extruder: target=215 temp=215.4 pwm=0.435
Stats 2123.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=389002 bytes_read=249198 bytes_retransmit=9 bytes_invalid=0 send_seq=12222 receive_seq=12222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.9 pwm=0.274 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=90551 sysload=0.45 cputime=35.621 memavail=1629708 print_time=2134.719 buffer_time=2.493 print_stall=0 extruder: target=215 temp=215.6 pwm=0.372
Stats 2124.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=389555 bytes_read=249570 bytes_retransmit=9 bytes_invalid=0 send_seq=12239 receive_seq=12239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=90632 sysload=0.45 cputime=35.674 memavail=1629456 print_time=2135.487 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.7 pwm=0.339
Stats 2125.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=390280 bytes_read=249992 bytes_retransmit=9 bytes_invalid=0 send_seq=12261 receive_seq=12260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.015 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=90718 sysload=0.41 cputime=35.712 memavail=1629388 print_time=2136.462 buffer_time=2.232 print_stall=0 extruder: target=215 temp=215.9 pwm=0.339
Stats 2126.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000045 bytes_write=390794 bytes_read=250393 bytes_retransmit=9 bytes_invalid=0 send_seq=12280 receive_seq=12280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=90806 sysload=0.41 cputime=35.766 memavail=1629412 print_time=2137.384 buffer_time=2.154 print_stall=0 extruder: target=215 temp=215.7 pwm=0.473
Stats 2127.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=391376 bytes_read=250785 bytes_retransmit=9 bytes_invalid=0 send_seq=12298 receive_seq=12298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.9 pwm=0.433 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=90925 sysload=0.41 cputime=35.821 memavail=1629144 print_time=2138.338 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.6 pwm=0.535
Stats 2128.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=392009 bytes_read=251197 bytes_retransmit=9 bytes_invalid=0 send_seq=12317 receive_seq=12317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=91011 sysload=0.41 cputime=35.877 memavail=1629156 print_time=2139.237 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.6 pwm=0.501
Stats 2129.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=392896 bytes_read=251618 bytes_retransmit=9 bytes_invalid=0 send_seq=12341 receive_seq=12341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=91132 sysload=0.41 cputime=35.931 memavail=1628900 print_time=2140.397 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.5 pwm=0.449
Stats 2130.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=394261 bytes_read=252065 bytes_retransmit=9 bytes_invalid=0 send_seq=12373 receive_seq=12373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.108 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=91429 sysload=0.38 cputime=35.970 memavail=1629156 print_time=2141.977 buffer_time=2.741 print_stall=0 extruder: target=215 temp=215.6 pwm=0.388
Stats 2131.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=394912 bytes_read=252487 bytes_retransmit=9 bytes_invalid=0 send_seq=12394 receive_seq=12394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=91578 sysload=0.38 cputime=36.025 memavail=1628852 print_time=2142.748 buffer_time=2.512 print_stall=0 extruder: target=215 temp=215.4 pwm=0.547
Stats 2132.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=395772 bytes_read=252918 bytes_retransmit=9 bytes_invalid=0 send_seq=12418 receive_seq=12417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=54.9 pwm=0.764 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=91809 sysload=0.38 cputime=36.083 memavail=1629104 print_time=2143.574 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.3 pwm=0.523
Stats 2133.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=396449 bytes_read=253310 bytes_retransmit=9 bytes_invalid=0 send_seq=12439 receive_seq=12438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.050 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=91959 sysload=0.38 cputime=36.136 memavail=1629380 print_time=2144.338 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.3 pwm=0.485
Stats 2134.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=397305 bytes_read=253752 bytes_retransmit=9 bytes_invalid=0 send_seq=12464 receive_seq=12463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.078 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=92152 sysload=0.38 cputime=36.192 memavail=1629616 print_time=2145.537 buffer_time=2.299 print_stall=0 extruder: target=215 temp=215.2 pwm=0.519
Stats 2135.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=398093 bytes_read=254178 bytes_retransmit=9 bytes_invalid=0 send_seq=12488 receive_seq=12488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=54.0 mcu_temp: temp=40.6 sd_pos=92451 sysload=0.35 cputime=36.253 memavail=1629852 print_time=2146.341 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.2 pwm=0.526
Stats 2136.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=399284 bytes_read=254615 bytes_retransmit=9 bytes_invalid=0 send_seq=12518 receive_seq=12518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=54.9 pwm=0.527 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=92707 sysload=0.35 cputime=36.311 memavail=1629848 print_time=2147.258 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.3 pwm=0.428
Stats 2137.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=400344 bytes_read=255082 bytes_retransmit=9 bytes_invalid=0 send_seq=12545 receive_seq=12545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=92909 sysload=0.35 cputime=36.366 memavail=1629884 print_time=2148.785 buffer_time=2.543 print_stall=0 extruder: target=215 temp=215.1 pwm=0.550
Stats 2138.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=400982 bytes_read=255468 bytes_retransmit=9 bytes_invalid=0 send_seq=12565 receive_seq=12564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=93024 sysload=0.35 cputime=36.419 memavail=1629652 print_time=2149.539 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.2 pwm=0.452
Stats 2139.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=401598 bytes_read=255845 bytes_retransmit=9 bytes_invalid=0 send_seq=12584 receive_seq=12584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.1 sd_pos=93140 sysload=0.35 cputime=36.470 memavail=1629932 print_time=2150.293 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.2 pwm=0.452
Stats 2140.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=402406 bytes_read=256265 bytes_retransmit=9 bytes_invalid=0 send_seq=12607 receive_seq=12607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=93315 sysload=0.32 cputime=36.524 memavail=1629940 print_time=2151.776 buffer_time=2.528 print_stall=0 extruder: target=215 temp=215.3 pwm=0.405
Stats 2141.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000039 bytes_write=403040 bytes_read=256653 bytes_retransmit=9 bytes_invalid=0 send_seq=12627 receive_seq=12626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=93476 sysload=0.32 cputime=36.579 memavail=1629928 print_time=2152.522 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 2142.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=403872 bytes_read=257070 bytes_retransmit=9 bytes_invalid=0 send_seq=12649 receive_seq=12649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=54.9 pwm=0.717 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=93535 sysload=0.32 cputime=36.634 memavail=1630008 print_time=2153.418 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.2 pwm=0.381
Stats 2143.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=404619 bytes_read=257502 bytes_retransmit=9 bytes_invalid=0 send_seq=12672 receive_seq=12672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.448 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=93689 sysload=0.32 cputime=36.690 memavail=1629972 print_time=2154.411 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.2 pwm=0.407
Stats 2144.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=405637 bytes_read=257933 bytes_retransmit=9 bytes_invalid=0 send_seq=12698 receive_seq=12698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=93809 sysload=0.32 cputime=36.746 memavail=1630224 print_time=2155.460 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.4 pwm=0.381
Stats 2145.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=406349 bytes_read=258325 bytes_retransmit=9 bytes_invalid=0 send_seq=12719 receive_seq=12719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=54.8 pwm=0.782 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=93928 sysload=0.29 cputime=36.804 memavail=1630260 print_time=2156.521 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.3 pwm=0.397
Stats 2146.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=407086 bytes_read=258747 bytes_retransmit=9 bytes_invalid=0 send_seq=12740 receive_seq=12740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=94041 sysload=0.29 cputime=36.859 memavail=1630008 print_time=2157.832 buffer_time=2.576 print_stall=0 extruder: target=215 temp=215.2 pwm=0.464
Stats 2147.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=407685 bytes_read=259153 bytes_retransmit=9 bytes_invalid=0 send_seq=12758 receive_seq=12758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=94156 sysload=0.29 cputime=36.910 memavail=1629764 print_time=2158.864 buffer_time=2.606 print_stall=0 extruder: target=215 temp=215.0 pwm=0.559
Stats 2148.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=408143 bytes_read=259541 bytes_retransmit=9 bytes_invalid=0 send_seq=12776 receive_seq=12776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=94215 sysload=0.29 cputime=36.963 memavail=1629732 print_time=2159.258 buffer_time=1.999 print_stall=0 extruder: target=215 temp=215.1 pwm=0.513
Stats 2149.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=409652 bytes_read=260038 bytes_retransmit=9 bytes_invalid=0 send_seq=12812 receive_seq=12812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=95001 sysload=0.29 cputime=37.022 memavail=1629960 print_time=2160.504 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.1 pwm=0.531
Stats 2150.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=410446 bytes_read=260439 bytes_retransmit=9 bytes_invalid=0 send_seq=12833 receive_seq=12832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=95521 sysload=0.35 cputime=37.063 memavail=1629444 print_time=2161.428 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 2151.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=411623 bytes_read=260866 bytes_retransmit=9 bytes_invalid=0 send_seq=12860 receive_seq=12860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=96316 sysload=0.35 cputime=37.130 memavail=1629680 print_time=2162.582 buffer_time=2.320 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 2152.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=412400 bytes_read=261298 bytes_retransmit=9 bytes_invalid=0 send_seq=12880 receive_seq=12880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=96886 sysload=0.35 cputime=37.192 memavail=1629736 print_time=2163.453 buffer_time=2.191 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 2153.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=413746 bytes_read=261744 bytes_retransmit=9 bytes_invalid=0 send_seq=12909 receive_seq=12909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=97742 sysload=0.35 cputime=37.258 memavail=1629696 print_time=2164.381 buffer_time=2.116 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 2154.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=414664 bytes_read=262146 bytes_retransmit=9 bytes_invalid=0 send_seq=12933 receive_seq=12932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=98316 sysload=0.35 cputime=37.323 memavail=1629732 print_time=2165.399 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 2155.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=415449 bytes_read=262592 bytes_retransmit=9 bytes_invalid=0 send_seq=12956 receive_seq=12955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=54.5 mcu_temp: temp=41.4 sd_pos=98837 sysload=0.40 cputime=37.391 memavail=1629360 print_time=2166.670 buffer_time=2.398 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 2156.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=416587 bytes_read=263029 bytes_retransmit=9 bytes_invalid=0 send_seq=12985 receive_seq=12985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=99243 sysload=0.40 cputime=37.454 memavail=1629412 print_time=2167.617 buffer_time=2.344 print_stall=0 extruder: target=215 temp=214.8 pwm=0.628
Stats 2157.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=417490 bytes_read=263451 bytes_retransmit=9 bytes_invalid=0 send_seq=13009 receive_seq=13009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.430 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=99361 sysload=0.40 cputime=37.511 memavail=1629664 print_time=2168.443 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 2158.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=418345 bytes_read=263907 bytes_retransmit=9 bytes_invalid=0 send_seq=13034 receive_seq=13034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=99506 sysload=0.40 cputime=37.568 memavail=1629640 print_time=2169.452 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.8 pwm=0.489
Stats 2159.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=419358 bytes_read=264324 bytes_retransmit=9 bytes_invalid=0 send_seq=13060 receive_seq=13060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.057 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=99652 sysload=0.40 cputime=37.623 memavail=1630152 print_time=2170.557 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 2160.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=420367 bytes_read=264731 bytes_retransmit=9 bytes_invalid=0 send_seq=13085 receive_seq=13084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.437 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=99769 sysload=0.45 cputime=37.659 memavail=1630476 print_time=2171.743 buffer_time=2.467 print_stall=0 extruder: target=215 temp=214.9 pwm=0.429
Stats 2161.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=420969 bytes_read=265172 bytes_retransmit=9 bytes_invalid=0 send_seq=13106 receive_seq=13106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=99829 sysload=0.45 cputime=37.712 memavail=1630852 print_time=2172.355 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.8 pwm=0.483
Stats 2162.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=421951 bytes_read=265599 bytes_retransmit=9 bytes_invalid=0 send_seq=13131 receive_seq=13131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=54.9 pwm=0.459 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=99946 sysload=0.45 cputime=37.769 memavail=1630624 print_time=2173.608 buffer_time=2.328 print_stall=0 extruder: target=215 temp=214.7 pwm=0.481
Stats 2163.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=422978 bytes_read=266026 bytes_retransmit=9 bytes_invalid=0 send_seq=13156 receive_seq=13156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=100091 sysload=0.45 cputime=37.823 memavail=1630608 print_time=2174.865 buffer_time=2.584 print_stall=0 extruder: target=215 temp=214.7 pwm=0.481
Stats 2164.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=423647 bytes_read=266432 bytes_retransmit=9 bytes_invalid=0 send_seq=13175 receive_seq=13174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=100177 sysload=0.45 cputime=37.873 memavail=1630568 print_time=2175.489 buffer_time=2.207 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 2165.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=424612 bytes_read=266839 bytes_retransmit=9 bytes_invalid=0 send_seq=13198 receive_seq=13198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=54.9 pwm=0.883 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=100324 sysload=0.50 cputime=37.928 memavail=1630876 print_time=2176.717 buffer_time=2.433 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 2166.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=425227 bytes_read=267231 bytes_retransmit=9 bytes_invalid=0 send_seq=13216 receive_seq=13216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.131 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=100384 sysload=0.50 cputime=37.981 memavail=1630756 print_time=2177.293 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 2167.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=426283 bytes_read=267697 bytes_retransmit=9 bytes_invalid=0 send_seq=13244 receive_seq=13243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=100531 sysload=0.50 cputime=38.039 memavail=1630296 print_time=2178.404 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 2168.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=427169 bytes_read=268109 bytes_retransmit=9 bytes_invalid=0 send_seq=13268 receive_seq=13268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=100648 sysload=0.50 cputime=38.094 memavail=1630444 print_time=2179.403 buffer_time=2.116 print_stall=0 extruder: target=215 temp=214.9 pwm=0.447
Stats 2169.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=428303 bytes_read=268541 bytes_retransmit=9 bytes_invalid=0 send_seq=13294 receive_seq=13294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.386 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=100849 sysload=0.50 cputime=38.148 memavail=1629900 print_time=2180.631 buffer_time=2.344 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 2170.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=429854 bytes_read=269017 bytes_retransmit=9 bytes_invalid=0 send_seq=13326 receive_seq=13326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.065 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=101403 sysload=0.62 cputime=38.188 memavail=1629968 print_time=2182.108 buffer_time=2.819 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 2171.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=430278 bytes_read=269379 bytes_retransmit=9 bytes_invalid=0 send_seq=13341 receive_seq=13341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.533 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=101463 sysload=0.62 cputime=38.239 memavail=1630472 print_time=2182.694 buffer_time=2.403 print_stall=0 extruder: target=215 temp=215.0 pwm=0.405
Stats 2172.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=431040 bytes_read=269791 bytes_retransmit=9 bytes_invalid=0 send_seq=13361 receive_seq=13360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.650 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=101670 sysload=0.62 cputime=38.292 memavail=1630212 print_time=2183.619 buffer_time=2.326 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 2173.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=431815 bytes_read=270222 bytes_retransmit=9 bytes_invalid=0 send_seq=13384 receive_seq=13383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.017 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=101909 sysload=0.62 cputime=38.352 memavail=1630204 print_time=2184.316 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 2174.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=432974 bytes_read=270659 bytes_retransmit=9 bytes_invalid=0 send_seq=13413 receive_seq=13413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=102266 sysload=0.62 cputime=38.416 memavail=1630252 print_time=2185.464 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 2175.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=434752 bytes_read=271151 bytes_retransmit=9 bytes_invalid=0 send_seq=13451 receive_seq=13451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.750 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=103074 sysload=0.57 cputime=38.495 memavail=1630200 print_time=2186.465 buffer_time=2.163 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 2176.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=435592 bytes_read=271582 bytes_retransmit=9 bytes_invalid=0 send_seq=13474 receive_seq=13474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=103711 sysload=0.57 cputime=38.562 memavail=1630252 print_time=2187.412 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 2177.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=436814 bytes_read=272029 bytes_retransmit=9 bytes_invalid=0 send_seq=13503 receive_seq=13503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.034 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=104596 sysload=0.57 cputime=38.632 memavail=1630200 print_time=2188.589 buffer_time=2.285 print_stall=0 extruder: target=215 temp=214.7 pwm=0.642
Stats 2178.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=437673 bytes_read=272441 bytes_retransmit=9 bytes_invalid=0 send_seq=13525 receive_seq=13525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=105295 sysload=0.57 cputime=38.694 memavail=1630000 print_time=2189.493 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.8 pwm=0.499
Stats 2179.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=438578 bytes_read=272882 bytes_retransmit=9 bytes_invalid=0 send_seq=13550 receive_seq=13550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=105870 sysload=0.57 cputime=38.754 memavail=1629400 print_time=2190.327 buffer_time=2.022 print_stall=0 extruder: target=215 temp=214.7 pwm=0.461
Stats 2180.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=439540 bytes_read=273289 bytes_retransmit=9 bytes_invalid=0 send_seq=13574 receive_seq=13574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.520 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=106454 sysload=0.52 cputime=38.797 memavail=1629360 print_time=2191.508 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.7 pwm=0.470
Stats 2181.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=440557 bytes_read=273731 bytes_retransmit=9 bytes_invalid=0 send_seq=13599 receive_seq=13599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=10 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=107409 sysload=0.52 cputime=38.862 memavail=1629356 print_time=2192.599 buffer_time=2.289 print_stall=0 extruder: target=215 temp=214.7 pwm=0.514
Stats 2182.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=441469 bytes_read=274162 bytes_retransmit=9 bytes_invalid=0 send_seq=13622 receive_seq=13622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=53.6 mcu_temp: temp=41.8 sd_pos=107812 sysload=0.52 cputime=38.924 memavail=1629300 print_time=2193.527 buffer_time=2.217 print_stall=0 extruder: target=215 temp=214.6 pwm=0.571
Stats 2183.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=442589 bytes_read=274584 bytes_retransmit=9 bytes_invalid=0 send_seq=13649 receive_seq=13649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=54.5 mcu_temp: temp=41.4 sd_pos=108018 sysload=0.52 cputime=38.981 memavail=1629296 print_time=2194.709 buffer_time=2.397 print_stall=0 extruder: target=215 temp=214.5 pwm=0.620
Stats 2184.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=443459 bytes_read=275016 bytes_retransmit=9 bytes_invalid=0 send_seq=13672 receive_seq=13672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.015 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=108134 sysload=0.52 cputime=39.037 memavail=1629292 print_time=2195.688 buffer_time=2.375 print_stall=0 extruder: target=215 temp=214.6 pwm=0.492
Stats 2185.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=444432 bytes_read=275447 bytes_retransmit=9 bytes_invalid=0 send_seq=13698 receive_seq=13698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=108280 sysload=0.48 cputime=39.093 memavail=1629780 print_time=2196.774 buffer_time=2.460 print_stall=0 extruder: target=215 temp=214.5 pwm=0.552
Stats 2186.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=445132 bytes_read=275839 bytes_retransmit=9 bytes_invalid=0 send_seq=13719 receive_seq=13719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=108339 sysload=0.48 cputime=39.155 memavail=1629276 print_time=2197.343 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.6 pwm=0.506
Stats 2187.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=446125 bytes_read=276311 bytes_retransmit=9 bytes_invalid=0 send_seq=13747 receive_seq=13747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=108486 sysload=0.48 cputime=39.212 memavail=1629480 print_time=2198.527 buffer_time=2.211 print_stall=0 extruder: target=215 temp=214.6 pwm=0.466
Stats 2188.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=447112 bytes_read=276737 bytes_retransmit=9 bytes_invalid=0 send_seq=13772 receive_seq=13772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.570 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=108634 sysload=0.48 cputime=39.268 memavail=1629492 print_time=2199.753 buffer_time=2.436 print_stall=0 extruder: target=215 temp=214.6 pwm=0.541
Stats 2189.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=447800 bytes_read=277129 bytes_retransmit=9 bytes_invalid=0 send_seq=13793 receive_seq=13793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=108692 sysload=0.48 cputime=39.325 memavail=1629476 print_time=2200.373 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.5 pwm=0.590
Stats 2190.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=448771 bytes_read=277581 bytes_retransmit=9 bytes_invalid=0 send_seq=13820 receive_seq=13820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=108808 sysload=0.44 cputime=39.359 memavail=1629732 print_time=2201.616 buffer_time=2.298 print_stall=0 extruder: target=215 temp=214.6 pwm=0.503
Stats 2191.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=449850 bytes_read=278022 bytes_retransmit=9 bytes_invalid=0 send_seq=13848 receive_seq=13848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=108954 sysload=0.44 cputime=39.419 memavail=1629500 print_time=2202.833 buffer_time=2.515 print_stall=0 extruder: target=215 temp=214.4 pwm=0.600
Stats 2192.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=450495 bytes_read=278429 bytes_retransmit=9 bytes_invalid=0 send_seq=13869 receive_seq=13869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=109043 sysload=0.44 cputime=39.476 memavail=1629980 print_time=2203.441 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.4 pwm=0.625
Stats 2193.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=451527 bytes_read=278886 bytes_retransmit=9 bytes_invalid=0 send_seq=13897 receive_seq=13897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.532 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=109160 sysload=0.44 cputime=39.539 memavail=1630000 print_time=2204.550 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.7 pwm=0.396
Stats 2194.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=452521 bytes_read=279327 bytes_retransmit=9 bytes_invalid=0 send_seq=13925 receive_seq=13925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.145 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=109306 sysload=0.44 cputime=39.604 memavail=1629992 print_time=2205.580 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.4 pwm=0.628
Stats 2195.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=453436 bytes_read=279739 bytes_retransmit=9 bytes_invalid=0 send_seq=13950 receive_seq=13950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.518 rpi: temp=54.5 mcu_temp: temp=41.4 sd_pos=109420 sysload=0.40 cputime=39.637 memavail=1630008 print_time=2206.442 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.5 pwm=0.559
Stats 2196.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=454900 bytes_read=280221 bytes_retransmit=9 bytes_invalid=0 send_seq=13983 receive_seq=13983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.550 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=109833 sysload=0.40 cputime=39.699 memavail=1629748 print_time=2207.486 buffer_time=2.165 print_stall=0 extruder: target=215 temp=214.5 pwm=0.559
Stats 2197.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=455771 bytes_read=280653 bytes_retransmit=9 bytes_invalid=0 send_seq=14007 receive_seq=14007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=110021 sysload=0.40 cputime=39.760 memavail=1630184 print_time=2208.914 buffer_time=2.592 print_stall=0 extruder: target=215 temp=214.5 pwm=0.559
Stats 2198.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=456252 bytes_read=281030 bytes_retransmit=9 bytes_invalid=0 send_seq=14027 receive_seq=14027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=110121 sysload=0.40 cputime=39.823 memavail=1629732 print_time=2210.132 buffer_time=2.810 print_stall=0 extruder: target=215 temp=214.4 pwm=0.620
Stats 2199.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=456699 bytes_read=281435 bytes_retransmit=9 bytes_invalid=0 send_seq=14047 receive_seq=14047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.482 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=110223 sysload=0.40 cputime=39.884 memavail=1629424 print_time=2211.349 buffer_time=3.026 print_stall=0 extruder: target=215 temp=214.5 pwm=0.543
Stats 2200.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=457029 bytes_read=281815 bytes_retransmit=9 bytes_invalid=0 send_seq=14065 receive_seq=14065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.437 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=110223 sysload=0.37 cputime=39.938 memavail=1629488 print_time=2211.349 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.6 pwm=0.529
Stats 2201.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=457896 bytes_read=282223 bytes_retransmit=9 bytes_invalid=0 send_seq=14090 receive_seq=14090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=110606 sysload=0.37 cputime=40.004 memavail=1629196 print_time=2212.512 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.7 pwm=0.529
Stats 2202.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=458875 bytes_read=282680 bytes_retransmit=9 bytes_invalid=0 send_seq=14115 receive_seq=14115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=110805 sysload=0.37 cputime=40.067 memavail=1629240 print_time=2213.593 buffer_time=2.268 print_stall=0 extruder: target=215 temp=214.9 pwm=0.363
Stats 2203.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=459583 bytes_read=283081 bytes_retransmit=9 bytes_invalid=0 send_seq=14135 receive_seq=14135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=111065 sysload=0.37 cputime=40.126 memavail=1628868 print_time=2214.606 buffer_time=2.280 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 2204.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=460713 bytes_read=283508 bytes_retransmit=9 bytes_invalid=0 send_seq=14163 receive_seq=14163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.153 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=111440 sysload=0.37 cputime=40.190 memavail=1629188 print_time=2215.399 buffer_time=2.072 print_stall=0 extruder: target=215 temp=214.9 pwm=0.552
Stats 2205.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=462368 bytes_read=284015 bytes_retransmit=9 bytes_invalid=0 send_seq=14201 receive_seq=14201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.354 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=111892 sysload=0.34 cputime=40.259 memavail=1629388 print_time=2216.681 buffer_time=2.354 print_stall=0 extruder: target=215 temp=215.3 pwm=0.344
Stats 2206.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=462999 bytes_read=284426 bytes_retransmit=9 bytes_invalid=0 send_seq=14223 receive_seq=14223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.488 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=111974 sysload=0.34 cputime=40.319 memavail=1629416 print_time=2217.449 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.4 pwm=0.456
Stats 2207.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=463619 bytes_read=284839 bytes_retransmit=9 bytes_invalid=0 send_seq=14243 receive_seq=14243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.173 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=112060 sysload=0.34 cputime=40.378 memavail=1629096 print_time=2218.424 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.6 pwm=0.292
Stats 2208.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=464187 bytes_read=285256 bytes_retransmit=9 bytes_invalid=0 send_seq=14263 receive_seq=14263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=112148 sysload=0.34 cputime=40.436 memavail=1629324 print_time=2219.347 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.7 pwm=0.330
Stats 2209.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=464947 bytes_read=285677 bytes_retransmit=9 bytes_invalid=0 send_seq=14287 receive_seq=14287 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=112295 sysload=0.34 cputime=40.498 memavail=1630072 print_time=2220.573 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.7 pwm=0.457
Stats 2210.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=465588 bytes_read=286054 bytes_retransmit=9 bytes_invalid=0 send_seq=14305 receive_seq=14305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=112416 sysload=0.31 cputime=40.555 memavail=1630404 print_time=2221.852 buffer_time=2.522 print_stall=0 extruder: target=215 temp=215.6 pwm=0.512
Stats 2211.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=466648 bytes_read=286511 bytes_retransmit=9 bytes_invalid=0 send_seq=14333 receive_seq=14333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.516 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=112537 sysload=0.31 cputime=40.615 memavail=1630920 print_time=2222.720 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.7 pwm=0.477
Stats 2212.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=467485 bytes_read=286947 bytes_retransmit=9 bytes_invalid=0 send_seq=14357 receive_seq=14357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=112711 sysload=0.31 cputime=40.674 memavail=1630408 print_time=2223.662 buffer_time=2.330 print_stall=0 extruder: target=215 temp=215.8 pwm=0.389
Stats 2213.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=468127 bytes_read=287339 bytes_retransmit=9 bytes_invalid=0 send_seq=14378 receive_seq=14378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.443 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=112826 sysload=0.31 cputime=40.705 memavail=1630448 print_time=2224.441 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.7 pwm=0.507
Stats 2214.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=469174 bytes_read=287801 bytes_retransmit=9 bytes_invalid=0 send_seq=14407 receive_seq=14407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.430 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=113057 sysload=0.31 cputime=40.766 memavail=1630376 print_time=2225.949 buffer_time=2.616 print_stall=0 extruder: target=215 temp=215.8 pwm=0.392
Stats 2215.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=469765 bytes_read=288192 bytes_retransmit=9 bytes_invalid=0 send_seq=14425 receive_seq=14425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=113172 sysload=0.29 cputime=40.819 memavail=1630172 print_time=2226.766 buffer_time=2.434 print_stall=0 extruder: target=215 temp=215.6 pwm=0.521
Stats 2216.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=470223 bytes_read=288574 bytes_retransmit=9 bytes_invalid=0 send_seq=14444 receive_seq=14444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.551 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=113317 sysload=0.29 cputime=40.878 memavail=1630212 print_time=2227.437 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.8 pwm=0.353
Stats 2217.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=471261 bytes_read=289041 bytes_retransmit=9 bytes_invalid=0 send_seq=14471 receive_seq=14471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=54.0 mcu_temp: temp=41.0 sd_pos=113701 sysload=0.29 cputime=40.942 memavail=1630484 print_time=2228.964 buffer_time=2.629 print_stall=0 extruder: target=215 temp=215.6 pwm=0.492
Stats 2218.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=472253 bytes_read=289472 bytes_retransmit=9 bytes_invalid=0 send_seq=14497 receive_seq=14497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=54.5 mcu_temp: temp=41.4 sd_pos=113869 sysload=0.29 cputime=41.000 memavail=1630436 print_time=2229.914 buffer_time=2.579 print_stall=0 extruder: target=215 temp=215.5 pwm=0.535
Stats 2219.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=472864 bytes_read=289864 bytes_retransmit=9 bytes_invalid=0 send_seq=14518 receive_seq=14518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.026 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=114056 sysload=0.29 cputime=41.060 memavail=1630436 print_time=2230.411 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.4 pwm=0.523
Stats 2220.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=474005 bytes_read=290326 bytes_retransmit=9 bytes_invalid=0 send_seq=14547 receive_seq=14547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=114325 sysload=0.27 cputime=41.121 memavail=1630464 print_time=2231.965 buffer_time=2.629 print_stall=0 extruder: target=215 temp=215.5 pwm=0.398
Stats 2221.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=474830 bytes_read=290742 bytes_retransmit=9 bytes_invalid=0 send_seq=14570 receive_seq=14570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=114504 sysload=0.27 cputime=41.180 memavail=1630548 print_time=2232.953 buffer_time=2.616 print_stall=0 extruder: target=215 temp=215.4 pwm=0.411
Stats 2222.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=475416 bytes_read=291149 bytes_retransmit=9 bytes_invalid=0 send_seq=14591 receive_seq=14591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=114593 sysload=0.27 cputime=41.240 memavail=1630496 print_time=2233.662 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.2 pwm=0.554
Stats 2223.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=475999 bytes_read=291561 bytes_retransmit=9 bytes_invalid=0 send_seq=14610 receive_seq=14610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.204 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=114680 sysload=0.27 cputime=41.297 memavail=1630820 print_time=2234.599 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.2 pwm=0.453
Stats 2224.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=476728 bytes_read=291967 bytes_retransmit=9 bytes_invalid=0 send_seq=14631 receive_seq=14631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.517 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=114773 sysload=0.27 cputime=41.357 memavail=1631076 print_time=2235.843 buffer_time=2.503 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 2225.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=477663 bytes_read=292394 bytes_retransmit=9 bytes_invalid=0 send_seq=14659 receive_seq=14659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=114893 sysload=0.24 cputime=41.415 memavail=1631076 print_time=2236.829 buffer_time=2.489 print_stall=0 extruder: target=215 temp=215.2 pwm=0.430
Stats 2226.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=478307 bytes_read=292821 bytes_retransmit=9 bytes_invalid=0 send_seq=14681 receive_seq=14681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=114983 sysload=0.24 cputime=41.477 memavail=1631076 print_time=2237.537 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 2227.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=478873 bytes_read=293232 bytes_retransmit=9 bytes_invalid=0 send_seq=14700 receive_seq=14700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.223 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=115068 sysload=0.24 cputime=41.539 memavail=1631076 print_time=2238.555 buffer_time=2.213 print_stall=0 extruder: target=215 temp=215.1 pwm=0.473
Stats 2228.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=479590 bytes_read=293624 bytes_retransmit=9 bytes_invalid=0 send_seq=14721 receive_seq=14721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.704 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=115181 sysload=0.24 cputime=41.595 memavail=1631076 print_time=2239.569 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.2 pwm=0.409
Stats 2229.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=480289 bytes_read=294056 bytes_retransmit=9 bytes_invalid=0 send_seq=14744 receive_seq=14744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=115298 sysload=0.24 cputime=41.651 memavail=1630296 print_time=2240.627 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.2 pwm=0.382
Stats 2230.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=481296 bytes_read=294487 bytes_retransmit=9 bytes_invalid=0 send_seq=14770 receive_seq=14770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=115820 sysload=0.22 cputime=41.714 memavail=1630320 print_time=2241.400 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 2231.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=482227 bytes_read=294899 bytes_retransmit=9 bytes_invalid=0 send_seq=14795 receive_seq=14795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.034 rpi: temp=54.0 mcu_temp: temp=41.2 sd_pos=116612 sysload=0.22 cputime=41.782 memavail=1630312 print_time=2242.463 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.2 pwm=0.401
Stats 2232.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=483408 bytes_read=295376 bytes_retransmit=9 bytes_invalid=0 send_seq=14824 receive_seq=14824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.235 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=117344 sysload=0.22 cputime=41.856 memavail=1630324 print_time=2243.353 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 2233.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=484504 bytes_read=295812 bytes_retransmit=9 bytes_invalid=0 send_seq=14851 receive_seq=14851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.771 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=118231 sysload=0.22 cputime=41.929 memavail=1630072 print_time=2244.533 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.0 pwm=0.522
Stats 2234.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=485583 bytes_read=296229 bytes_retransmit=9 bytes_invalid=0 send_seq=14877 receive_seq=14877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=118911 sysload=0.22 cputime=41.996 memavail=1629744 print_time=2245.398 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 2235.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=486635 bytes_read=296681 bytes_retransmit=9 bytes_invalid=0 send_seq=14904 receive_seq=14904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=119837 sysload=0.21 cputime=42.067 memavail=1629444 print_time=2246.457 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.2 pwm=0.410
Stats 2236.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=487377 bytes_read=297097 bytes_retransmit=9 bytes_invalid=0 send_seq=14927 receive_seq=14927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=120358 sysload=0.21 cputime=42.136 memavail=1630036 print_time=2247.587 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 2237.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=488642 bytes_read=297544 bytes_retransmit=9 bytes_invalid=0 send_seq=14958 receive_seq=14956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=120972 sysload=0.21 cputime=42.207 memavail=1630284 print_time=2248.660 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 2238.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=489810 bytes_read=298011 bytes_retransmit=9 bytes_invalid=0 send_seq=14986 receive_seq=14986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.474 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=121209 sysload=0.21 cputime=42.264 memavail=1629784 print_time=2249.753 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 2239.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=490604 bytes_read=298417 bytes_retransmit=9 bytes_invalid=0 send_seq=15007 receive_seq=15007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=121357 sysload=0.21 cputime=42.298 memavail=1630024 print_time=2250.676 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 2240.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=491613 bytes_read=298834 bytes_retransmit=9 bytes_invalid=0 send_seq=15033 receive_seq=15033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=121475 sysload=0.19 cputime=42.353 memavail=1629796 print_time=2251.685 buffer_time=2.331 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 2241.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=492662 bytes_read=299286 bytes_retransmit=9 bytes_invalid=0 send_seq=15060 receive_seq=15060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=121590 sysload=0.19 cputime=42.410 memavail=1629292 print_time=2252.785 buffer_time=2.431 print_stall=0 extruder: target=215 temp=214.8 pwm=0.508
Stats 2242.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=493367 bytes_read=299717 bytes_retransmit=9 bytes_invalid=0 send_seq=15083 receive_seq=15083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=121648 sysload=0.19 cputime=42.441 memavail=1629040 print_time=2253.353 buffer_time=1.999 print_stall=0 extruder: target=215 temp=214.7 pwm=0.529
Stats 2243.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=494303 bytes_read=300129 bytes_retransmit=9 bytes_invalid=0 send_seq=15108 receive_seq=15108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.473 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=121822 sysload=0.19 cputime=42.496 memavail=1629292 print_time=2254.540 buffer_time=2.185 print_stall=0 extruder: target=215 temp=214.8 pwm=0.469
Stats 2244.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=495251 bytes_read=300576 bytes_retransmit=9 bytes_invalid=0 send_seq=15134 receive_seq=15134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=121939 sysload=0.19 cputime=42.552 memavail=1629292 print_time=2255.728 buffer_time=2.372 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 2245.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=496262 bytes_read=301012 bytes_retransmit=9 bytes_invalid=0 send_seq=15161 receive_seq=15161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=122085 sysload=0.17 cputime=42.612 memavail=1629308 print_time=2256.939 buffer_time=2.583 print_stall=0 extruder: target=215 temp=214.9 pwm=0.418
Stats 2246.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=496915 bytes_read=301404 bytes_retransmit=9 bytes_invalid=0 send_seq=15182 receive_seq=15182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.2 pwm=0.013 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=122144 sysload=0.17 cputime=42.661 memavail=1629216 print_time=2257.514 buffer_time=2.156 print_stall=0 extruder: target=215 temp=214.7 pwm=0.551
Stats 2247.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=497965 bytes_read=301871 bytes_retransmit=9 bytes_invalid=0 send_seq=15209 receive_seq=15209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=122290 sysload=0.17 cputime=42.720 memavail=1629244 print_time=2258.658 buffer_time=2.299 print_stall=0 extruder: target=215 temp=214.7 pwm=0.540
Stats 2248.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=498990 bytes_read=302307 bytes_retransmit=9 bytes_invalid=0 send_seq=15236 receive_seq=15236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.463 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=122436 sysload=0.17 cputime=42.781 memavail=1629228 print_time=2259.741 buffer_time=2.381 print_stall=0 extruder: target=215 temp=214.9 pwm=0.379
Stats 2249.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=499863 bytes_read=302724 bytes_retransmit=9 bytes_invalid=0 send_seq=15262 receive_seq=15262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=122554 sysload=0.17 cputime=42.833 memavail=1628976 print_time=2260.720 buffer_time=2.360 print_stall=0 extruder: target=215 temp=214.8 pwm=0.511
Stats 2250.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=500745 bytes_read=303156 bytes_retransmit=9 bytes_invalid=0 send_seq=15285 receive_seq=15285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=122696 sysload=0.16 cputime=42.865 memavail=1629244 print_time=2261.562 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.8 pwm=0.511
Stats 2251.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=501879 bytes_read=303597 bytes_retransmit=9 bytes_invalid=0 send_seq=15313 receive_seq=15313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.490 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=123130 sysload=0.16 cputime=42.927 memavail=1629008 print_time=2262.413 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 2252.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=503683 bytes_read=304099 bytes_retransmit=9 bytes_invalid=0 send_seq=15353 receive_seq=15353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=123688 sysload=0.16 cputime=42.992 memavail=1629212 print_time=2263.415 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.360
Stats 2253.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=505346 bytes_read=304596 bytes_retransmit=9 bytes_invalid=0 send_seq=15389 receive_seq=15389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=124228 sysload=0.16 cputime=43.060 memavail=1629268 print_time=2264.606 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 2254.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=506379 bytes_read=305022 bytes_retransmit=9 bytes_invalid=0 send_seq=15414 receive_seq=15414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=124915 sysload=0.16 cputime=43.099 memavail=1629468 print_time=2265.404 buffer_time=2.041 print_stall=0 extruder: target=215 temp=214.7 pwm=0.601
Stats 2255.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=507454 bytes_read=305439 bytes_retransmit=9 bytes_invalid=0 send_seq=15440 receive_seq=15440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=125830 sysload=0.15 cputime=43.168 memavail=1629736 print_time=2266.395 buffer_time=2.032 print_stall=0 extruder: target=215 temp=215.0 pwm=0.405
Stats 2256.4: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=508586 bytes_read=305891 bytes_retransmit=9 bytes_invalid=0 send_seq=15467 receive_seq=15467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=126412 sysload=0.15 cputime=43.232 memavail=1629752 print_time=2267.383 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 2257.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=509658 bytes_read=306333 bytes_retransmit=9 bytes_invalid=0 send_seq=15494 receive_seq=15494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=127383 sysload=0.15 cputime=43.304 memavail=1629984 print_time=2268.442 buffer_time=2.077 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 2258.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=510779 bytes_read=306744 bytes_retransmit=9 bytes_invalid=0 send_seq=15521 receive_seq=15521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.690 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=128094 sysload=0.15 cputime=43.368 memavail=1630008 print_time=2269.710 buffer_time=2.345 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 2259.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=511559 bytes_read=307164 bytes_retransmit=9 bytes_invalid=0 send_seq=15544 receive_seq=15544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=128561 sysload=0.15 cputime=43.437 memavail=1630216 print_time=2270.564 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.7 pwm=0.596
Stats 2260.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=512532 bytes_read=307574 bytes_retransmit=9 bytes_invalid=0 send_seq=15568 receive_seq=15568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=10 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.571 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=129482 sysload=0.13 cputime=43.508 memavail=1630188 print_time=2271.657 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.6 pwm=0.611
Stats 2261.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=513684 bytes_read=308000 bytes_retransmit=9 bytes_invalid=0 send_seq=15596 receive_seq=15596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=129823 sysload=0.13 cputime=43.570 memavail=1630500 print_time=2272.616 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.5 pwm=0.653
Stats 2262.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=514599 bytes_read=308471 bytes_retransmit=9 bytes_invalid=0 send_seq=15621 receive_seq=15621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=129939 sysload=0.13 cputime=43.627 memavail=1630496 print_time=2273.545 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.5 pwm=0.507
Stats 2263.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=515576 bytes_read=308893 bytes_retransmit=9 bytes_invalid=0 send_seq=15648 receive_seq=15648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=130086 sysload=0.13 cputime=43.687 memavail=1630280 print_time=2274.597 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.3 pwm=0.696
Stats 2264.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=516597 bytes_read=309315 bytes_retransmit=9 bytes_invalid=0 send_seq=15675 receive_seq=15675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.236 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=130233 sysload=0.13 cputime=43.747 memavail=1629700 print_time=2275.751 buffer_time=2.381 print_stall=0 extruder: target=215 temp=214.4 pwm=0.612
Stats 2265.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=517597 bytes_read=309786 bytes_retransmit=9 bytes_invalid=0 send_seq=15703 receive_seq=15703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.137 rpi: temp=54.0 mcu_temp: temp=41.3 sd_pos=130351 sysload=0.12 cputime=43.805 memavail=1629464 print_time=2276.960 buffer_time=2.590 print_stall=0 extruder: target=215 temp=214.4 pwm=0.560
Stats 2266.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=518262 bytes_read=310173 bytes_retransmit=9 bytes_invalid=0 send_seq=15723 receive_seq=15723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.421 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=130440 sysload=0.12 cputime=43.858 memavail=1629152 print_time=2277.583 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.2 pwm=0.722
Stats 2267.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=519270 bytes_read=310610 bytes_retransmit=9 bytes_invalid=0 send_seq=15750 receive_seq=15750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=130585 sysload=0.12 cputime=43.912 memavail=1628900 print_time=2278.841 buffer_time=2.470 print_stall=0 extruder: target=215 temp=214.2 pwm=0.660
Stats 2268.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=520004 bytes_read=311051 bytes_retransmit=9 bytes_invalid=0 send_seq=15772 receive_seq=15772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=130643 sysload=0.12 cputime=43.968 memavail=1628644 print_time=2279.463 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.3 pwm=0.572
Stats 2269.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=521009 bytes_read=311484 bytes_retransmit=9 bytes_invalid=0 send_seq=15799 receive_seq=15799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.163 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=130785 sysload=0.12 cputime=44.026 memavail=1628432 print_time=2280.694 buffer_time=2.323 print_stall=0 extruder: target=215 temp=214.3 pwm=0.572
Stats 2270.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=522017 bytes_read=311901 bytes_retransmit=9 bytes_invalid=0 send_seq=15825 receive_seq=15825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=130901 sysload=0.11 cputime=44.059 memavail=1628968 print_time=2281.871 buffer_time=2.499 print_stall=0 extruder: target=215 temp=214.3 pwm=0.543
Stats 2271.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=522683 bytes_read=312337 bytes_retransmit=9 bytes_invalid=0 send_seq=15846 receive_seq=15846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=130961 sysload=0.11 cputime=44.112 memavail=1628696 print_time=2282.433 buffer_time=2.060 print_stall=0 extruder: target=215 temp=214.3 pwm=0.543
Stats 2272.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=523594 bytes_read=312759 bytes_retransmit=9 bytes_invalid=0 send_seq=15870 receive_seq=15870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.471 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=131108 sysload=0.11 cputime=44.165 memavail=1628652 print_time=2283.495 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.2 pwm=0.660
Stats 2273.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=524503 bytes_read=313166 bytes_retransmit=9 bytes_invalid=0 send_seq=15894 receive_seq=15894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.036 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=131253 sysload=0.11 cputime=44.220 memavail=1628400 print_time=2284.459 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.4 pwm=0.565
Stats 2274.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=525727 bytes_read=313647 bytes_retransmit=9 bytes_invalid=0 send_seq=15924 receive_seq=15924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=131487 sysload=0.11 cputime=44.280 memavail=1628600 print_time=2285.597 buffer_time=2.222 print_stall=0 extruder: target=215 temp=214.3 pwm=0.528
Stats 2275.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=527265 bytes_read=314104 bytes_retransmit=9 bytes_invalid=0 send_seq=15958 receive_seq=15958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=131939 sysload=0.10 cputime=44.341 memavail=1628704 print_time=2286.444 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.2 pwm=0.673
Stats 2276.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=528002 bytes_read=314501 bytes_retransmit=9 bytes_invalid=0 send_seq=15980 receive_seq=15980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=132155 sysload=0.10 cputime=44.399 memavail=1628484 print_time=2287.681 buffer_time=2.305 print_stall=0 extruder: target=215 temp=214.3 pwm=0.541
Stats 2277.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=528662 bytes_read=314952 bytes_retransmit=9 bytes_invalid=0 send_seq=16001 receive_seq=16001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.538 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=132443 sysload=0.10 cputime=44.458 memavail=1628684 print_time=2288.568 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.4 pwm=0.546
Stats 2278.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=529573 bytes_read=315354 bytes_retransmit=9 bytes_invalid=0 send_seq=16024 receive_seq=16024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=132813 sysload=0.10 cputime=44.518 memavail=1628708 print_time=2289.578 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.3 pwm=0.546
Stats 2279.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=530843 bytes_read=315801 bytes_retransmit=9 bytes_invalid=0 send_seq=16053 receive_seq=16053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=10 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=133301 sysload=0.10 cputime=44.576 memavail=1628664 print_time=2290.702 buffer_time=2.325 print_stall=0 extruder: target=215 temp=214.5 pwm=0.559
Stats 2280.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=532133 bytes_read=316267 bytes_retransmit=9 bytes_invalid=0 send_seq=16083 receive_seq=16083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.011 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=133549 sysload=0.10 cputime=44.613 memavail=1628992 print_time=2291.724 buffer_time=2.346 print_stall=0 extruder: target=215 temp=214.6 pwm=0.564
Stats 2281.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=532723 bytes_read=316644 bytes_retransmit=9 bytes_invalid=0 send_seq=16101 receive_seq=16101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=54.0 mcu_temp: temp=40.9 sd_pos=133631 sysload=0.10 cputime=44.669 memavail=1628952 print_time=2292.492 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.9 pwm=0.419
Stats 2282.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=533325 bytes_read=317056 bytes_retransmit=9 bytes_invalid=0 send_seq=16120 receive_seq=16120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=54.0 mcu_temp: temp=40.5 sd_pos=133715 sysload=0.10 cputime=44.725 memavail=1629000 print_time=2293.467 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.0 pwm=0.458
Stats 2283.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=533856 bytes_read=317462 bytes_retransmit=9 bytes_invalid=0 send_seq=16138 receive_seq=16138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.414 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=133801 sysload=0.10 cputime=44.776 memavail=1629228 print_time=2294.390 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.3 pwm=0.377
Stats 2284.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=534535 bytes_read=317849 bytes_retransmit=9 bytes_invalid=0 send_seq=16158 receive_seq=16158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.414 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=133948 sysload=0.10 cputime=44.832 memavail=1629732 print_time=2295.616 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.4 pwm=0.377
Stats 2285.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=535239 bytes_read=318251 bytes_retransmit=9 bytes_invalid=0 send_seq=16178 receive_seq=16178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.008 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=134063 sysload=0.09 cputime=44.889 memavail=1629728 print_time=2296.895 buffer_time=2.514 print_stall=0 extruder: target=215 temp=215.6 pwm=0.400
Stats 2286.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=536013 bytes_read=318677 bytes_retransmit=9 bytes_invalid=0 send_seq=16200 receive_seq=16200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.048 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=134128 sysload=0.09 cputime=44.944 memavail=1629704 print_time=2297.403 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.8 pwm=0.399
Stats 2287.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=537313 bytes_read=319139 bytes_retransmit=9 bytes_invalid=0 send_seq=16232 receive_seq=16232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.672 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=134396 sysload=0.09 cputime=45.005 memavail=1629672 print_time=2298.953 buffer_time=2.572 print_stall=0 extruder: target=215 temp=215.8 pwm=0.476
Stats 2288.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=538095 bytes_read=319556 bytes_retransmit=9 bytes_invalid=0 send_seq=16255 receive_seq=16255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=134576 sysload=0.09 cputime=45.061 memavail=1629672 print_time=2299.941 buffer_time=2.559 print_stall=0 extruder: target=215 temp=215.8 pwm=0.425
Stats 2289.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=538838 bytes_read=319987 bytes_retransmit=9 bytes_invalid=0 send_seq=16278 receive_seq=16278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.097 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=134696 sysload=0.09 cputime=45.115 memavail=1629976 print_time=2300.732 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.8 pwm=0.421
Stats 2290.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=539709 bytes_read=320399 bytes_retransmit=9 bytes_invalid=0 send_seq=16303 receive_seq=16303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=134876 sysload=0.08 cputime=45.148 memavail=1629980 print_time=2301.719 buffer_time=2.336 print_stall=0 extruder: target=215 temp=215.6 pwm=0.538
Stats 2291.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=540333 bytes_read=320811 bytes_retransmit=9 bytes_invalid=0 send_seq=16325 receive_seq=16325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.386 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=134966 sysload=0.08 cputime=45.201 memavail=1630288 print_time=2302.428 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.5 pwm=0.588
Stats 2292.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=540963 bytes_read=321237 bytes_retransmit=9 bytes_invalid=0 send_seq=16344 receive_seq=16344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.508 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=135082 sysload=0.08 cputime=45.235 memavail=1630056 print_time=2303.719 buffer_time=2.335 print_stall=0 extruder: target=215 temp=215.4 pwm=0.528
Stats 2293.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=541535 bytes_read=321619 bytes_retransmit=9 bytes_invalid=0 send_seq=16363 receive_seq=16363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=135145 sysload=0.08 cputime=45.287 memavail=1630028 print_time=2304.613 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.5 pwm=0.457
Stats 2294.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=542614 bytes_read=322066 bytes_retransmit=9 bytes_invalid=0 send_seq=16392 receive_seq=16392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=135319 sysload=0.08 cputime=45.345 memavail=1629800 print_time=2305.436 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.4 pwm=0.507
Stats 2295.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=543673 bytes_read=322522 bytes_retransmit=9 bytes_invalid=0 send_seq=16420 receive_seq=16420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=135527 sysload=0.07 cputime=45.406 memavail=1629796 print_time=2306.964 buffer_time=2.577 print_stall=0 extruder: target=215 temp=215.2 pwm=0.545
Stats 2296.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=544308 bytes_read=322914 bytes_retransmit=9 bytes_invalid=0 send_seq=16441 receive_seq=16441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.8 pwm=0.796 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=135647 sysload=0.07 cputime=45.464 memavail=1629796 print_time=2307.717 buffer_time=2.330 print_stall=0 extruder: target=215 temp=215.2 pwm=0.573
Stats 2297.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=544998 bytes_read=323341 bytes_retransmit=9 bytes_invalid=0 send_seq=16463 receive_seq=16463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.116 rpi: temp=54.0 mcu_temp: temp=40.9 sd_pos=135767 sysload=0.07 cputime=45.521 memavail=1629568 print_time=2308.471 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.1 pwm=0.534
Stats 2298.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=545936 bytes_read=323787 bytes_retransmit=9 bytes_invalid=0 send_seq=16489 receive_seq=16489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=136096 sysload=0.07 cputime=45.580 memavail=1629552 print_time=2309.976 buffer_time=2.587 print_stall=0 extruder: target=215 temp=215.3 pwm=0.498
Stats 2299.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=546378 bytes_read=324159 bytes_retransmit=9 bytes_invalid=0 send_seq=16506 receive_seq=16506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=136202 sysload=0.07 cputime=45.611 memavail=1629872 print_time=2310.413 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.3 pwm=0.477
Stats 2300.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=547698 bytes_read=324616 bytes_retransmit=9 bytes_invalid=0 send_seq=16537 receive_seq=16537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=136409 sysload=0.07 cputime=45.650 memavail=1629652 print_time=2311.907 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.4 pwm=0.367
Stats 2301.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=548303 bytes_read=325037 bytes_retransmit=9 bytes_invalid=0 send_seq=16558 receive_seq=16558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.116 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=136499 sysload=0.07 cputime=45.705 memavail=1629936 print_time=2312.615 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.4 pwm=0.479
Stats 2302.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=548861 bytes_read=325429 bytes_retransmit=9 bytes_invalid=0 send_seq=16576 receive_seq=16576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.654 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=136583 sysload=0.07 cputime=45.763 memavail=1629956 print_time=2313.633 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.2 pwm=0.533
Stats 2303.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=549535 bytes_read=325841 bytes_retransmit=9 bytes_invalid=0 send_seq=16598 receive_seq=16598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.463 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=136696 sysload=0.07 cputime=45.821 memavail=1629972 print_time=2314.647 buffer_time=2.255 print_stall=0 extruder: target=215 temp=215.4 pwm=0.396
Stats 2304.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=550268 bytes_read=326267 bytes_retransmit=9 bytes_invalid=0 send_seq=16620 receive_seq=16620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.439 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=136814 sysload=0.07 cputime=45.881 memavail=1629952 print_time=2315.705 buffer_time=2.313 print_stall=0 extruder: target=215 temp=215.2 pwm=0.477
Stats 2305.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=551387 bytes_read=326689 bytes_retransmit=9 bytes_invalid=0 send_seq=16647 receive_seq=16647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.525 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=137246 sysload=0.06 cputime=45.940 memavail=1629704 print_time=2316.453 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.2 pwm=0.494
Stats 2306.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=552413 bytes_read=327121 bytes_retransmit=9 bytes_invalid=0 send_seq=16673 receive_seq=16673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.351 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=138160 sysload=0.06 cputime=46.010 memavail=1629504 print_time=2317.531 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 2307.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=553446 bytes_read=327577 bytes_retransmit=9 bytes_invalid=0 send_seq=16698 receive_seq=16698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.438 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=138741 sysload=0.06 cputime=46.078 memavail=1629760 print_time=2318.413 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.2 pwm=0.489
Stats 2308.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=554603 bytes_read=328004 bytes_retransmit=9 bytes_invalid=0 send_seq=16726 receive_seq=16726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.118 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=139748 sysload=0.06 cputime=46.157 memavail=1629524 print_time=2319.570 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.2 pwm=0.489
Stats 2309.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=555392 bytes_read=328411 bytes_retransmit=9 bytes_invalid=0 send_seq=16747 receive_seq=16747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.705 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=140343 sysload=0.06 cputime=46.222 memavail=1629764 print_time=2320.396 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.1 pwm=0.565
Stats 2310.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=556557 bytes_read=328867 bytes_retransmit=9 bytes_invalid=0 send_seq=16775 receive_seq=16775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=141327 sysload=0.06 cputime=46.289 memavail=1629748 print_time=2321.546 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 2311.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=557413 bytes_read=329264 bytes_retransmit=9 bytes_invalid=0 send_seq=16797 receive_seq=16797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=141850 sysload=0.06 cputime=46.352 memavail=1629536 print_time=2322.555 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.1 pwm=0.473
Stats 2312.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=558316 bytes_read=329696 bytes_retransmit=9 bytes_invalid=0 send_seq=16820 receive_seq=16820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=142282 sysload=0.06 cputime=46.412 memavail=1629252 print_time=2323.476 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 2313.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=559462 bytes_read=330152 bytes_retransmit=9 bytes_invalid=0 send_seq=16848 receive_seq=16848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=54.0 mcu_temp: temp=40.9 sd_pos=142549 sysload=0.06 cputime=46.472 memavail=1629016 print_time=2324.662 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.8 pwm=0.581
Stats 2314.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=560325 bytes_read=330554 bytes_retransmit=9 bytes_invalid=0 send_seq=16871 receive_seq=16871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=54.9 pwm=0.554 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=142666 sysload=0.06 cputime=46.527 memavail=1629268 print_time=2325.663 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 2315.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=561291 bytes_read=330981 bytes_retransmit=9 bytes_invalid=0 send_seq=16896 receive_seq=16896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=142812 sysload=0.05 cputime=46.586 memavail=1629112 print_time=2326.779 buffer_time=2.380 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 2316.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=562278 bytes_read=331424 bytes_retransmit=9 bytes_invalid=0 send_seq=16922 receive_seq=16922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=54.0 mcu_temp: temp=40.8 sd_pos=142930 sysload=0.05 cputime=46.643 memavail=1629120 print_time=2327.947 buffer_time=2.548 print_stall=0 extruder: target=215 temp=214.7 pwm=0.610
Stats 2317.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=562962 bytes_read=331821 bytes_retransmit=9 bytes_invalid=0 send_seq=16943 receive_seq=16943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.1 pwm=0.029 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=143020 sysload=0.05 cputime=46.696 memavail=1629096 print_time=2328.557 buffer_time=2.158 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 2318.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=563953 bytes_read=332242 bytes_retransmit=9 bytes_invalid=0 send_seq=16969 receive_seq=16969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=143194 sysload=0.05 cputime=46.730 memavail=1629104 print_time=2329.805 buffer_time=2.404 print_stall=0 extruder: target=215 temp=214.8 pwm=0.572
Stats 2319.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=564671 bytes_read=332656 bytes_retransmit=9 bytes_invalid=0 send_seq=16991 receive_seq=16991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=143251 sysload=0.05 cputime=46.786 memavail=1629080 print_time=2330.430 buffer_time=2.030 print_stall=0 extruder: target=215 temp=214.7 pwm=0.570
Stats 2320.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=565643 bytes_read=333062 bytes_retransmit=9 bytes_invalid=0 send_seq=17016 receive_seq=17016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.347 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=143394 sysload=0.05 cputime=46.819 memavail=1629356 print_time=2331.671 buffer_time=2.269 print_stall=0 extruder: target=215 temp=214.5 pwm=0.648
Stats 2321.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=566940 bytes_read=333524 bytes_retransmit=9 bytes_invalid=0 send_seq=17048 receive_seq=17048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=143509 sysload=0.05 cputime=46.883 memavail=1628864 print_time=2332.884 buffer_time=2.482 print_stall=0 extruder: target=215 temp=214.7 pwm=0.528
Stats 2322.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=567603 bytes_read=333965 bytes_retransmit=9 bytes_invalid=0 send_seq=17070 receive_seq=17070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.509 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=143598 sysload=0.05 cputime=46.941 memavail=1629124 print_time=2333.466 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.6 pwm=0.597
Stats 2323.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=568593 bytes_read=334382 bytes_retransmit=9 bytes_invalid=0 send_seq=17096 receive_seq=17096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=143746 sysload=0.05 cputime=46.996 memavail=1629080 print_time=2334.581 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.5 pwm=0.603
Stats 2324.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=569508 bytes_read=334809 bytes_retransmit=9 bytes_invalid=0 send_seq=17121 receive_seq=17121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=143863 sysload=0.05 cputime=47.054 memavail=1629124 print_time=2335.580 buffer_time=2.176 print_stall=0 extruder: target=215 temp=214.6 pwm=0.552
Stats 2325.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=570373 bytes_read=335240 bytes_retransmit=9 bytes_invalid=0 send_seq=17144 receive_seq=17144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=144007 sysload=0.04 cputime=47.087 memavail=1629368 print_time=2336.458 buffer_time=2.053 print_stall=0 extruder: target=215 temp=214.8 pwm=0.427
Stats 2326.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=571529 bytes_read=335667 bytes_retransmit=9 bytes_invalid=0 send_seq=17172 receive_seq=17172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=144526 sysload=0.04 cputime=47.145 memavail=1629092 print_time=2337.443 buffer_time=2.036 print_stall=0 extruder: target=215 temp=214.8 pwm=0.508
Stats 2327.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=573399 bytes_read=336194 bytes_retransmit=9 bytes_invalid=0 send_seq=17214 receive_seq=17214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.480 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=145342 sysload=0.04 cputime=47.213 memavail=1629068 print_time=2338.911 buffer_time=2.504 print_stall=0 extruder: target=215 temp=214.7 pwm=0.580
Stats 2328.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=574012 bytes_read=336610 bytes_retransmit=9 bytes_invalid=0 send_seq=17234 receive_seq=17234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=145603 sysload=0.04 cputime=47.276 memavail=1629060 print_time=2339.435 buffer_time=2.027 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 2329.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=575054 bytes_read=337022 bytes_retransmit=9 bytes_invalid=0 send_seq=17259 receive_seq=17259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.603 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=146515 sysload=0.04 cputime=47.344 memavail=1628788 print_time=2340.546 buffer_time=2.138 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 2330.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=576163 bytes_read=337490 bytes_retransmit=9 bytes_invalid=0 send_seq=17287 receive_seq=17287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.577 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=147068 sysload=0.04 cputime=47.406 memavail=1629080 print_time=2341.534 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.0 pwm=0.409
Stats 2331.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=577109 bytes_read=337911 bytes_retransmit=9 bytes_invalid=0 send_seq=17311 receive_seq=17311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=147784 sysload=0.04 cputime=47.472 memavail=1629292 print_time=2342.428 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 2332.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=578079 bytes_read=338333 bytes_retransmit=9 bytes_invalid=0 send_seq=17335 receive_seq=17335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=148402 sysload=0.04 cputime=47.540 memavail=1629320 print_time=2343.535 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 2333.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=578928 bytes_read=338760 bytes_retransmit=9 bytes_invalid=0 send_seq=17357 receive_seq=17357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.499 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=148972 sysload=0.04 cputime=47.603 memavail=1629288 print_time=2344.733 buffer_time=2.323 print_stall=0 extruder: target=215 temp=214.9 pwm=0.571
Stats 2334.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=579874 bytes_read=339191 bytes_retransmit=9 bytes_invalid=0 send_seq=17383 receive_seq=17383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.263 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=149777 sysload=0.04 cputime=47.673 memavail=1629320 print_time=2345.493 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 2335.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=581275 bytes_read=339633 bytes_retransmit=9 bytes_invalid=0 send_seq=17414 receive_seq=17414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.088 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=150172 sysload=0.04 cputime=47.709 memavail=1629320 print_time=2346.793 buffer_time=2.383 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 2336.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=582178 bytes_read=340065 bytes_retransmit=9 bytes_invalid=0 send_seq=17437 receive_seq=17437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=150288 sysload=0.04 cputime=47.768 memavail=1629068 print_time=2347.720 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 2337.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=583087 bytes_read=340496 bytes_retransmit=9 bytes_invalid=0 send_seq=17460 receive_seq=17460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.440 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=150434 sysload=0.04 cputime=47.831 memavail=1629300 print_time=2348.770 buffer_time=2.359 print_stall=0 extruder: target=215 temp=214.7 pwm=0.589
Stats 2338.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=584120 bytes_read=340923 bytes_retransmit=9 bytes_invalid=0 send_seq=17488 receive_seq=17488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.410 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=150549 sysload=0.04 cputime=47.893 memavail=1629340 print_time=2349.876 buffer_time=2.464 print_stall=0 extruder: target=215 temp=214.6 pwm=0.661
Stats 2339.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=584798 bytes_read=341340 bytes_retransmit=9 bytes_invalid=0 send_seq=17508 receive_seq=17508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=150606 sysload=0.04 cputime=47.951 memavail=1629324 print_time=2350.454 buffer_time=2.042 print_stall=0 extruder: target=215 temp=214.6 pwm=0.622
Stats 2340.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=585799 bytes_read=341766 bytes_retransmit=9 bytes_invalid=0 send_seq=17533 receive_seq=17533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=150753 sysload=0.03 cputime=48.007 memavail=1629348 print_time=2351.643 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.5 pwm=0.603
Stats 2341.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=586784 bytes_read=342188 bytes_retransmit=9 bytes_invalid=0 send_seq=17560 receive_seq=17560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=150870 sysload=0.03 cputime=48.064 memavail=1629056 print_time=2352.839 buffer_time=2.425 print_stall=0 extruder: target=215 temp=214.5 pwm=0.603
Stats 2342.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=587523 bytes_read=342630 bytes_retransmit=9 bytes_invalid=0 send_seq=17582 receive_seq=17582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=150959 sysload=0.03 cputime=48.123 memavail=1629108 print_time=2353.436 buffer_time=2.023 print_stall=0 extruder: target=215 temp=214.6 pwm=0.460
Stats 2343.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=588577 bytes_read=343071 bytes_retransmit=9 bytes_invalid=0 send_seq=17610 receive_seq=17610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=151075 sysload=0.03 cputime=48.181 memavail=1629072 print_time=2354.613 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.3 pwm=0.609
Stats 2344.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=589590 bytes_read=343483 bytes_retransmit=9 bytes_invalid=0 send_seq=17635 receive_seq=17635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=151221 sysload=0.03 cputime=48.241 memavail=1629056 print_time=2355.740 buffer_time=2.324 print_stall=0 extruder: target=215 temp=214.2 pwm=0.674
Stats 2345.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=590559 bytes_read=343925 bytes_retransmit=9 bytes_invalid=0 send_seq=17660 receive_seq=17660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=151338 sysload=0.03 cputime=48.301 memavail=1629368 print_time=2356.799 buffer_time=2.383 print_stall=0 extruder: target=215 temp=214.2 pwm=0.585
Stats 2346.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=591445 bytes_read=344336 bytes_retransmit=9 bytes_invalid=0 send_seq=17682 receive_seq=17682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.445 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=151483 sysload=0.03 cputime=48.334 memavail=1629100 print_time=2357.756 buffer_time=2.340 print_stall=0 extruder: target=215 temp=214.3 pwm=0.585
Stats 2347.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=592348 bytes_read=344758 bytes_retransmit=9 bytes_invalid=0 send_seq=17706 receive_seq=17706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=151630 sysload=0.03 cputime=48.394 memavail=1629104 print_time=2358.618 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.2 pwm=0.678
Stats 2348.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=593756 bytes_read=345240 bytes_retransmit=9 bytes_invalid=0 send_seq=17739 receive_seq=17739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.592 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=151939 sysload=0.03 cputime=48.431 memavail=1629340 print_time=2359.817 buffer_time=2.399 print_stall=0 extruder: target=215 temp=214.3 pwm=0.578
Stats 2349.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=595322 bytes_read=345716 bytes_retransmit=9 bytes_invalid=0 send_seq=17774 receive_seq=17774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=152365 sysload=0.03 cputime=48.496 memavail=1629128 print_time=2360.966 buffer_time=2.549 print_stall=0 extruder: target=215 temp=214.4 pwm=0.538
Stats 2350.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=595906 bytes_read=346098 bytes_retransmit=9 bytes_invalid=0 send_seq=17793 receive_seq=17793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.279 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=152446 sysload=0.03 cputime=48.548 memavail=1629348 print_time=2361.735 buffer_time=2.317 print_stall=0 extruder: target=215 temp=214.3 pwm=0.628
Stats 2351.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=596545 bytes_read=346510 bytes_retransmit=9 bytes_invalid=0 send_seq=17812 receive_seq=17812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=152532 sysload=0.03 cputime=48.606 memavail=1629372 print_time=2362.710 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.5 pwm=0.515
Stats 2352.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=597136 bytes_read=346926 bytes_retransmit=9 bytes_invalid=0 send_seq=17832 receive_seq=17832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.448 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=152620 sysload=0.03 cputime=48.665 memavail=1629112 print_time=2363.632 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.6 pwm=0.531
Stats 2353.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=597755 bytes_read=347313 bytes_retransmit=9 bytes_invalid=0 send_seq=17852 receive_seq=17852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.576 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=152739 sysload=0.03 cputime=48.723 memavail=1629036 print_time=2364.585 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.8 pwm=0.466
Stats 2354.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=598328 bytes_read=347730 bytes_retransmit=9 bytes_invalid=0 send_seq=17872 receive_seq=17872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=152825 sysload=0.03 cputime=48.782 memavail=1629060 print_time=2365.485 buffer_time=2.066 print_stall=0 extruder: target=215 temp=214.9 pwm=0.466
Stats 2355.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=599223 bytes_read=348151 bytes_retransmit=9 bytes_invalid=0 send_seq=17896 receive_seq=17896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=152946 sysload=0.02 cputime=48.843 memavail=1629364 print_time=2366.645 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 2356.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=600526 bytes_read=348598 bytes_retransmit=9 bytes_invalid=0 send_seq=17928 receive_seq=17928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=153212 sysload=0.02 cputime=48.907 memavail=1629132 print_time=2368.196 buffer_time=2.775 print_stall=0 extruder: target=215 temp=215.2 pwm=0.463
Stats 2357.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=601391 bytes_read=349055 bytes_retransmit=9 bytes_invalid=0 send_seq=17953 receive_seq=17953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=153392 sysload=0.02 cputime=48.966 memavail=1629036 print_time=2369.183 buffer_time=2.762 print_stall=0 extruder: target=215 temp=215.2 pwm=0.463
Stats 2358.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=602164 bytes_read=349471 bytes_retransmit=9 bytes_invalid=0 send_seq=17976 receive_seq=17976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.477 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=153510 sysload=0.02 cputime=49.022 memavail=1629080 print_time=2369.974 buffer_time=2.552 print_stall=0 extruder: target=215 temp=215.4 pwm=0.405
Stats 2359.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=602917 bytes_read=349868 bytes_retransmit=9 bytes_invalid=0 send_seq=17998 receive_seq=17998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=153690 sysload=0.02 cputime=49.079 memavail=1628996 print_time=2370.961 buffer_time=2.539 print_stall=0 extruder: target=215 temp=215.6 pwm=0.405
Stats 2360.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=603600 bytes_read=350290 bytes_retransmit=9 bytes_invalid=0 send_seq=18019 receive_seq=18019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=153779 sysload=0.02 cputime=49.112 memavail=1628772 print_time=2371.670 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.5 pwm=0.521
Stats 2361.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=604201 bytes_read=350686 bytes_retransmit=9 bytes_invalid=0 send_seq=18038 receive_seq=18038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.361 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=153865 sysload=0.02 cputime=49.170 memavail=1629184 print_time=2372.608 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.5 pwm=0.489
Stats 2362.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=604830 bytes_read=351083 bytes_retransmit=9 bytes_invalid=0 send_seq=18057 receive_seq=18057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=153957 sysload=0.02 cputime=49.231 memavail=1629188 print_time=2373.855 buffer_time=2.431 print_stall=0 extruder: target=215 temp=215.6 pwm=0.466
Stats 2363.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=605660 bytes_read=351520 bytes_retransmit=9 bytes_invalid=0 send_seq=18081 receive_seq=18081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=154044 sysload=0.02 cputime=49.262 memavail=1629480 print_time=2374.485 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.6 pwm=0.513
Stats 2364.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=606511 bytes_read=351936 bytes_retransmit=9 bytes_invalid=0 send_seq=18104 receive_seq=18104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.8 pwm=0.842 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=154218 sysload=0.02 cputime=49.321 memavail=1628964 print_time=2375.427 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.8 pwm=0.368
Stats 2365.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=607514 bytes_read=352363 bytes_retransmit=9 bytes_invalid=0 send_seq=18132 receive_seq=18132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=154545 sysload=0.02 cputime=49.384 memavail=1628980 print_time=2377.016 buffer_time=2.589 print_stall=0 extruder: target=215 temp=215.6 pwm=0.494
Stats 2366.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=608222 bytes_read=352785 bytes_retransmit=9 bytes_invalid=0 send_seq=18153 receive_seq=18153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.120 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=154665 sysload=0.02 cputime=49.442 memavail=1628908 print_time=2377.764 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.8 pwm=0.355
Stats 2367.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=608889 bytes_read=353206 bytes_retransmit=9 bytes_invalid=0 send_seq=18174 receive_seq=18174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.365 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=154784 sysload=0.02 cputime=49.501 memavail=1628988 print_time=2378.582 buffer_time=2.154 print_stall=0 extruder: target=215 temp=215.6 pwm=0.497
Stats 2368.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=609404 bytes_read=353578 bytes_retransmit=9 bytes_invalid=0 send_seq=18191 receive_seq=18191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=154908 sysload=0.02 cputime=49.558 memavail=1628976 print_time=2379.640 buffer_time=2.212 print_stall=0 extruder: target=215 temp=215.5 pwm=0.497
Stats 2369.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=610815 bytes_read=354055 bytes_retransmit=9 bytes_invalid=0 send_seq=18223 receive_seq=18223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=155101 sysload=0.02 cputime=49.623 memavail=1629008 print_time=2381.178 buffer_time=2.750 print_stall=0 extruder: target=215 temp=215.6 pwm=0.379
Stats 2370.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=611299 bytes_read=354446 bytes_retransmit=9 bytes_invalid=0 send_seq=18241 receive_seq=18241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=155161 sysload=0.02 cputime=49.657 memavail=1629252 print_time=2381.575 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.4 pwm=0.506
Stats 2371.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=611871 bytes_read=354828 bytes_retransmit=9 bytes_invalid=0 send_seq=18260 receive_seq=18260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=155247 sysload=0.02 cputime=49.718 memavail=1629052 print_time=2382.550 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.4 pwm=0.506
Stats 2372.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=612484 bytes_read=355250 bytes_retransmit=9 bytes_invalid=0 send_seq=18278 receive_seq=18278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=155331 sysload=0.02 cputime=49.751 memavail=1629244 print_time=2383.550 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.3 pwm=0.506
Stats 2373.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=613156 bytes_read=355661 bytes_retransmit=9 bytes_invalid=0 send_seq=18300 receive_seq=18300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=155446 sysload=0.02 cputime=49.814 memavail=1628752 print_time=2384.582 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.3 pwm=0.550
Stats 2374.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=614372 bytes_read=356093 bytes_retransmit=9 bytes_invalid=0 send_seq=18329 receive_seq=18329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=155951 sysload=0.02 cputime=49.876 memavail=1628500 print_time=2385.680 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.3 pwm=0.470
Stats 2375.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=615230 bytes_read=356515 bytes_retransmit=9 bytes_invalid=0 send_seq=18350 receive_seq=18350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=156603 sysload=0.02 cputime=49.946 memavail=1628496 print_time=2386.521 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.3 pwm=0.470
Stats 2376.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=616359 bytes_read=356950 bytes_retransmit=9 bytes_invalid=0 send_seq=18378 receive_seq=18378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=157300 sysload=0.02 cputime=50.018 memavail=1628508 print_time=2387.637 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.4 pwm=0.324
Stats 2377.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=617155 bytes_read=357352 bytes_retransmit=9 bytes_invalid=0 send_seq=18400 receive_seq=18400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.554 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=157924 sysload=0.02 cputime=50.085 memavail=1628756 print_time=2388.536 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.3 pwm=0.438
Stats 2378.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=618349 bytes_read=357792 bytes_retransmit=9 bytes_invalid=0 send_seq=18427 receive_seq=18427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.201 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=158827 sysload=0.02 cputime=50.159 memavail=1628732 print_time=2389.731 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.2 pwm=0.492
Stats 2379.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=619041 bytes_read=358187 bytes_retransmit=9 bytes_invalid=0 send_seq=18448 receive_seq=18448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.232 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=159254 sysload=0.02 cputime=50.219 memavail=1629000 print_time=2390.641 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.2 pwm=0.515
Stats 2380.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=620029 bytes_read=358592 bytes_retransmit=9 bytes_invalid=0 send_seq=18472 receive_seq=18472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=10 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=160197 sysload=0.02 cputime=50.262 memavail=1628984 print_time=2391.612 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.2 pwm=0.429
Stats 2381.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=621151 bytes_read=359044 bytes_retransmit=9 bytes_invalid=0 send_seq=18499 receive_seq=18499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.237 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=160658 sysload=0.02 cputime=50.327 memavail=1629008 print_time=2392.695 buffer_time=2.259 print_stall=0 extruder: target=215 temp=215.0 pwm=0.571
Stats 2382.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=622235 bytes_read=359490 bytes_retransmit=9 bytes_invalid=0 send_seq=18525 receive_seq=18525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.216 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=160896 sysload=0.02 cputime=50.388 memavail=1628988 print_time=2393.750 buffer_time=2.314 print_stall=0 extruder: target=215 temp=215.0 pwm=0.586
Stats 2383.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=623162 bytes_read=359897 bytes_retransmit=9 bytes_invalid=0 send_seq=18549 receive_seq=18549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=161011 sysload=0.02 cputime=50.448 memavail=1629004 print_time=2394.676 buffer_time=2.240 print_stall=0 extruder: target=215 temp=214.8 pwm=0.644
Stats 2384.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=624068 bytes_read=360339 bytes_retransmit=9 bytes_invalid=0 send_seq=18574 receive_seq=18574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=54.0 mcu_temp: temp=40.3 sd_pos=161187 sysload=0.02 cputime=50.511 memavail=1629244 print_time=2395.723 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 2385.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=625123 bytes_read=360775 bytes_retransmit=9 bytes_invalid=0 send_seq=18601 receive_seq=18601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=161334 sysload=0.01 cputime=50.568 memavail=1629508 print_time=2396.830 buffer_time=2.392 print_stall=0 extruder: target=215 temp=214.6 pwm=0.731
Stats 2386.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=626110 bytes_read=361202 bytes_retransmit=9 bytes_invalid=0 send_seq=18629 receive_seq=18629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=161481 sysload=0.01 cputime=50.629 memavail=1629228 print_time=2398.024 buffer_time=2.586 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 2387.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=626860 bytes_read=361649 bytes_retransmit=9 bytes_invalid=0 send_seq=18652 receive_seq=18652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.439 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=161541 sysload=0.01 cputime=50.688 memavail=1628968 print_time=2398.619 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.8 pwm=0.478
Stats 2388.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=627867 bytes_read=362080 bytes_retransmit=9 bytes_invalid=0 send_seq=18678 receive_seq=18678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=161688 sysload=0.01 cputime=50.723 memavail=1629316 print_time=2399.867 buffer_time=2.428 print_stall=0 extruder: target=215 temp=214.6 pwm=0.605
Stats 2389.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=628528 bytes_read=362467 bytes_retransmit=9 bytes_invalid=0 send_seq=18698 receive_seq=18698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=161773 sysload=0.01 cputime=50.780 memavail=1629548 print_time=2400.474 buffer_time=2.033 print_stall=0 extruder: target=215 temp=214.6 pwm=0.605
Stats 2390.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=629524 bytes_read=362919 bytes_retransmit=9 bytes_invalid=0 send_seq=18725 receive_seq=18725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.418 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=161889 sysload=0.01 cputime=50.813 memavail=1629816 print_time=2401.708 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.6 pwm=0.527
Stats 2391.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=630562 bytes_read=363355 bytes_retransmit=9 bytes_invalid=0 send_seq=18752 receive_seq=18752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=162034 sysload=0.01 cputime=50.873 memavail=1629800 print_time=2402.902 buffer_time=2.461 print_stall=0 extruder: target=215 temp=214.6 pwm=0.505
Stats 2392.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=631243 bytes_read=363778 bytes_retransmit=9 bytes_invalid=0 send_seq=18774 receive_seq=18774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=162093 sysload=0.01 cputime=50.931 memavail=1629564 print_time=2403.479 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.6 pwm=0.499
Stats 2393.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=632210 bytes_read=364220 bytes_retransmit=9 bytes_invalid=0 send_seq=18799 receive_seq=18799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=162238 sysload=0.01 cputime=50.966 memavail=1629048 print_time=2404.565 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.5 pwm=0.624
Stats 2394.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=633148 bytes_read=364646 bytes_retransmit=9 bytes_invalid=0 send_seq=18824 receive_seq=18824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=162409 sysload=0.01 cputime=51.028 memavail=1628788 print_time=2405.527 buffer_time=2.084 print_stall=0 extruder: target=215 temp=214.6 pwm=0.571
Stats 2395.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=634547 bytes_read=365093 bytes_retransmit=9 bytes_invalid=0 send_seq=18856 receive_seq=18856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=163034 sysload=0.01 cputime=51.093 memavail=1628792 print_time=2406.719 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.7 pwm=0.486
Stats 2396.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=635322 bytes_read=365520 bytes_retransmit=9 bytes_invalid=0 send_seq=18878 receive_seq=18878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=163413 sysload=0.01 cputime=51.155 memavail=1628808 print_time=2407.536 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 2397.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=636598 bytes_read=365986 bytes_retransmit=9 bytes_invalid=0 send_seq=18908 receive_seq=18908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.599 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=164319 sysload=0.01 cputime=51.227 memavail=1628804 print_time=2408.669 buffer_time=2.224 print_stall=0 extruder: target=215 temp=214.8 pwm=0.495
Stats 2398.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=637328 bytes_read=366368 bytes_retransmit=9 bytes_invalid=0 send_seq=18927 receive_seq=18927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=164696 sysload=0.01 cputime=51.267 memavail=1628816 print_time=2409.541 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.8 pwm=0.559
Stats 2399.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=638286 bytes_read=366815 bytes_retransmit=9 bytes_invalid=0 send_seq=18953 receive_seq=18953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.376 rpi: temp=54.0 mcu_temp: temp=40.5 sd_pos=165485 sysload=0.01 cputime=51.337 memavail=1628792 print_time=2410.532 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 2400.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=639322 bytes_read=367241 bytes_retransmit=9 bytes_invalid=0 send_seq=18978 receive_seq=18978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.598 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=165967 sysload=0.01 cputime=51.375 memavail=1629048 print_time=2411.480 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 2401.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=640058 bytes_read=367633 bytes_retransmit=9 bytes_invalid=0 send_seq=18999 receive_seq=18999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=166468 sysload=0.01 cputime=51.441 memavail=1628744 print_time=2412.624 buffer_time=2.176 print_stall=0 extruder: target=215 temp=214.9 pwm=0.594
Stats 2402.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=640988 bytes_read=368080 bytes_retransmit=9 bytes_invalid=0 send_seq=19022 receive_seq=19022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=167326 sysload=0.01 cputime=51.510 memavail=1629236 print_time=2413.469 buffer_time=2.021 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 2403.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=642264 bytes_read=368536 bytes_retransmit=9 bytes_invalid=0 send_seq=19053 receive_seq=19053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=167686 sysload=0.01 cputime=51.572 memavail=1628692 print_time=2414.689 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 2404.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=643166 bytes_read=368938 bytes_retransmit=9 bytes_invalid=0 send_seq=19076 receive_seq=19076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=167806 sysload=0.01 cputime=51.631 memavail=1628952 print_time=2415.631 buffer_time=2.182 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 2405.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=644091 bytes_read=369380 bytes_retransmit=9 bytes_invalid=0 send_seq=19101 receive_seq=19101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=167958 sysload=0.01 cputime=51.689 memavail=1628616 print_time=2416.694 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.8 pwm=0.575
Stats 2406.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=645086 bytes_read=369806 bytes_retransmit=9 bytes_invalid=0 send_seq=19126 receive_seq=19126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.312 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=168107 sysload=0.01 cputime=51.746 memavail=1628644 print_time=2417.848 buffer_time=2.399 print_stall=0 extruder: target=215 temp=214.6 pwm=0.729
Stats 2407.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=645767 bytes_read=370208 bytes_retransmit=9 bytes_invalid=0 send_seq=19146 receive_seq=19146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.417 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=168166 sysload=0.01 cputime=51.801 memavail=1628804 print_time=2418.450 buffer_time=1.999 print_stall=0 extruder: target=215 temp=214.8 pwm=0.501
Stats 2408.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=646770 bytes_read=370655 bytes_retransmit=9 bytes_invalid=0 send_seq=19172 receive_seq=19172 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=168319 sysload=0.01 cputime=51.859 memavail=1628640 print_time=2419.691 buffer_time=2.239 print_stall=0 extruder: target=215 temp=214.6 pwm=0.627
Stats 2409.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=647759 bytes_read=371081 bytes_retransmit=9 bytes_invalid=0 send_seq=19197 receive_seq=19197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.523 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=168439 sysload=0.01 cputime=51.917 memavail=1628584 print_time=2420.951 buffer_time=2.499 print_stall=0 extruder: target=215 temp=214.5 pwm=0.683
Stats 2410.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=648401 bytes_read=371468 bytes_retransmit=9 bytes_invalid=0 send_seq=19217 receive_seq=19217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=168530 sysload=0.01 cputime=51.971 memavail=1628896 print_time=2421.594 buffer_time=2.142 print_stall=0 extruder: target=215 temp=214.6 pwm=0.541
Stats 2411.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=649486 bytes_read=371925 bytes_retransmit=9 bytes_invalid=0 send_seq=19245 receive_seq=19245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=168682 sysload=0.01 cputime=52.032 memavail=1628888 print_time=2422.812 buffer_time=2.358 print_stall=0 extruder: target=215 temp=214.6 pwm=0.497
Stats 2412.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=650531 bytes_read=372381 bytes_retransmit=9 bytes_invalid=0 send_seq=19273 receive_seq=19273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=54.9 pwm=0.543 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=168831 sysload=0.01 cputime=52.087 memavail=1629164 print_time=2423.998 buffer_time=2.544 print_stall=0 extruder: target=215 temp=214.4 pwm=0.640
Stats 2413.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=651155 bytes_read=372768 bytes_retransmit=9 bytes_invalid=0 send_seq=19293 receive_seq=19293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.1 pwm=0.018 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=168891 sysload=0.01 cputime=52.142 memavail=1629408 print_time=2424.563 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.5 pwm=0.583
Stats 2414.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=652107 bytes_read=373220 bytes_retransmit=9 bytes_invalid=0 send_seq=19320 receive_seq=19320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=169012 sysload=0.01 cputime=52.198 memavail=1629396 print_time=2425.622 buffer_time=2.167 print_stall=0 extruder: target=215 temp=214.4 pwm=0.614
Stats 2415.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=652966 bytes_read=373636 bytes_retransmit=9 bytes_invalid=0 send_seq=19343 receive_seq=19343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=169193 sysload=0.01 cputime=52.253 memavail=1629652 print_time=2426.560 buffer_time=2.104 print_stall=0 extruder: target=215 temp=214.5 pwm=0.566
Stats 2416.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=654730 bytes_read=374108 bytes_retransmit=9 bytes_invalid=0 send_seq=19380 receive_seq=19380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=169775 sysload=0.01 cputime=52.317 memavail=1629356 print_time=2427.956 buffer_time=2.499 print_stall=0 extruder: target=215 temp=214.5 pwm=0.628
Stats 2417.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=655564 bytes_read=374565 bytes_retransmit=9 bytes_invalid=0 send_seq=19405 receive_seq=19405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=54.9 pwm=0.347 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=170015 sysload=0.01 cputime=52.378 memavail=1629624 print_time=2428.469 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.8 pwm=0.438
Stats 2418.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=656525 bytes_read=374986 bytes_retransmit=9 bytes_invalid=0 send_seq=19429 receive_seq=19429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=170857 sysload=0.01 cputime=52.447 memavail=1629360 print_time=2429.646 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.7 pwm=0.516
Stats 2419.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=657719 bytes_read=375398 bytes_retransmit=9 bytes_invalid=0 send_seq=19457 receive_seq=19454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=54.9 pwm=0.359 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=171497 sysload=0.01 cputime=52.514 memavail=1629384 print_time=2430.841 buffer_time=2.383 print_stall=0 extruder: target=215 temp=214.8 pwm=0.546
Stats 2420.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=658669 bytes_read=375865 bytes_retransmit=9 bytes_invalid=0 send_seq=19484 receive_seq=19484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=172275 sysload=0.01 cputime=52.579 memavail=1629588 print_time=2431.666 buffer_time=2.207 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 2421.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=659749 bytes_read=376301 bytes_retransmit=9 bytes_invalid=0 send_seq=19511 receive_seq=19511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.044 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=172705 sysload=0.01 cputime=52.643 memavail=1629872 print_time=2432.497 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.9 pwm=0.511
Stats 2422.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=660492 bytes_read=376713 bytes_retransmit=9 bytes_invalid=0 send_seq=19533 receive_seq=19533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=173177 sysload=0.01 cputime=52.708 memavail=1629960 print_time=2433.723 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 2423.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=661458 bytes_read=377155 bytes_retransmit=9 bytes_invalid=0 send_seq=19558 receive_seq=19558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=174072 sysload=0.01 cputime=52.774 memavail=1629440 print_time=2434.615 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 2424.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=662966 bytes_read=377631 bytes_retransmit=9 bytes_invalid=0 send_seq=19593 receive_seq=19593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=174538 sysload=0.01 cputime=52.842 memavail=1629704 print_time=2435.768 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.2 pwm=0.485
Stats 2425.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=663810 bytes_read=378033 bytes_retransmit=9 bytes_invalid=0 send_seq=19616 receive_seq=19616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.286 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=174688 sysload=0.01 cputime=52.881 memavail=1629688 print_time=2436.552 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.4 pwm=0.331
Stats 2426.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=664738 bytes_read=378490 bytes_retransmit=9 bytes_invalid=0 send_seq=19644 receive_seq=19644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=174839 sysload=0.01 cputime=52.916 memavail=1629456 print_time=2437.473 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.2 pwm=0.477
Stats 2427.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=665691 bytes_read=378941 bytes_retransmit=9 bytes_invalid=0 send_seq=19671 receive_seq=19671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.257 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=174960 sysload=0.01 cputime=52.975 memavail=1629440 print_time=2438.490 buffer_time=2.025 print_stall=0 extruder: target=215 temp=215.2 pwm=0.451
Stats 2428.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=666717 bytes_read=379363 bytes_retransmit=9 bytes_invalid=0 send_seq=19698 receive_seq=19698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.445 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=175081 sysload=0.01 cputime=53.033 memavail=1629264 print_time=2439.592 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.3 pwm=0.444
Stats 2429.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=667703 bytes_read=379820 bytes_retransmit=9 bytes_invalid=0 send_seq=19726 receive_seq=19726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=175202 sysload=0.01 cputime=53.091 memavail=1628944 print_time=2440.743 buffer_time=2.276 print_stall=0 extruder: target=215 temp=215.1 pwm=0.616
Stats 2430.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=668751 bytes_read=380266 bytes_retransmit=9 bytes_invalid=0 send_seq=19755 receive_seq=19755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=175352 sysload=0.00 cputime=53.129 memavail=1629212 print_time=2441.936 buffer_time=2.468 print_stall=0 extruder: target=215 temp=215.3 pwm=0.463
Stats 2431.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=669421 bytes_read=380663 bytes_retransmit=9 bytes_invalid=0 send_seq=19777 receive_seq=19777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.025 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=175412 sysload=0.00 cputime=53.182 memavail=1628952 print_time=2442.533 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.2 pwm=0.563
Stats 2432.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=670485 bytes_read=381149 bytes_retransmit=9 bytes_invalid=0 send_seq=19805 receive_seq=19805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.582 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=175563 sysload=0.00 cputime=53.241 memavail=1629216 print_time=2443.727 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.1 pwm=0.577
Stats 2433.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=671424 bytes_read=381546 bytes_retransmit=9 bytes_invalid=0 send_seq=19827 receive_seq=19827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.505 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=175684 sysload=0.00 cputime=53.275 memavail=1628948 print_time=2444.895 buffer_time=2.425 print_stall=0 extruder: target=215 temp=215.1 pwm=0.581
Stats 2434.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=672392 bytes_read=381968 bytes_retransmit=9 bytes_invalid=0 send_seq=19854 receive_seq=19854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.599 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=175835 sysload=0.00 cputime=53.336 memavail=1628868 print_time=2446.011 buffer_time=2.540 print_stall=0 extruder: target=215 temp=214.9 pwm=0.684
Stats 2435.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=673120 bytes_read=382419 bytes_retransmit=9 bytes_invalid=0 send_seq=19878 receive_seq=19878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=175896 sysload=0.00 cputime=53.392 memavail=1628912 print_time=2446.542 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.1 pwm=0.507
Stats 2436.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=674019 bytes_read=382822 bytes_retransmit=9 bytes_invalid=0 send_seq=19903 receive_seq=19903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=176016 sysload=0.00 cputime=53.452 memavail=1628916 print_time=2447.522 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 2437.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=675054 bytes_read=383243 bytes_retransmit=9 bytes_invalid=0 send_seq=19929 receive_seq=19929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.203 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=176292 sysload=0.00 cputime=53.508 memavail=1628844 print_time=2448.736 buffer_time=2.262 print_stall=0 extruder: target=215 temp=214.7 pwm=0.643
Stats 2438.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=676639 bytes_read=383741 bytes_retransmit=9 bytes_invalid=0 send_seq=19965 receive_seq=19965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=176786 sysload=0.00 cputime=53.572 memavail=1628608 print_time=2450.039 buffer_time=2.564 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 2439.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=677175 bytes_read=384111 bytes_retransmit=9 bytes_invalid=0 send_seq=19983 receive_seq=19983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.197 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=176867 sysload=0.00 cputime=53.630 memavail=1628584 print_time=2450.807 buffer_time=2.332 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 2440.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=677713 bytes_read=384488 bytes_retransmit=9 bytes_invalid=0 send_seq=20001 receive_seq=20001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=176953 sysload=0.00 cputime=53.663 memavail=1628904 print_time=2451.782 buffer_time=2.306 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 2441.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=678323 bytes_read=384904 bytes_retransmit=9 bytes_invalid=0 send_seq=20018 receive_seq=20018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.478 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=177041 sysload=0.00 cputime=53.697 memavail=1628856 print_time=2452.704 buffer_time=2.228 print_stall=0 extruder: target=215 temp=214.7 pwm=0.629
Stats 2442.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=678852 bytes_read=385281 bytes_retransmit=9 bytes_invalid=0 send_seq=20033 receive_seq=20033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.007 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=177160 sysload=0.00 cputime=53.731 memavail=1629120 print_time=2453.658 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.8 pwm=0.560
Stats 2443.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=679474 bytes_read=385678 bytes_retransmit=9 bytes_invalid=0 send_seq=20052 receive_seq=20052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=177246 sysload=0.00 cputime=53.790 memavail=1628872 print_time=2454.557 buffer_time=2.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.488
Stats 2444.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=680401 bytes_read=386124 bytes_retransmit=9 bytes_invalid=0 send_seq=20078 receive_seq=20078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.464 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=177367 sysload=0.00 cputime=53.846 memavail=1628860 print_time=2455.717 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.2 pwm=0.344
Stats 2445.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=681601 bytes_read=386526 bytes_retransmit=9 bytes_invalid=0 send_seq=20106 receive_seq=20101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=177633 sysload=0.00 cputime=53.903 memavail=1628624 print_time=2457.268 buffer_time=2.786 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 2446.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000047 bytes_write=682462 bytes_read=386968 bytes_retransmit=9 bytes_invalid=0 send_seq=20129 receive_seq=20129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.497 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=177813 sysload=0.00 cputime=53.960 memavail=1628616 print_time=2458.255 buffer_time=2.773 print_stall=0 extruder: target=215 temp=215.4 pwm=0.345
Stats 2447.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=683228 bytes_read=387414 bytes_retransmit=9 bytes_invalid=0 send_seq=20152 receive_seq=20152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=177931 sysload=0.00 cputime=54.017 memavail=1628888 print_time=2459.046 buffer_time=2.563 print_stall=0 extruder: target=215 temp=215.4 pwm=0.500
Stats 2448.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=684071 bytes_read=387826 bytes_retransmit=9 bytes_invalid=0 send_seq=20177 receive_seq=20177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.558 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=178111 sysload=0.00 cputime=54.071 memavail=1628648 print_time=2460.034 buffer_time=2.550 print_stall=0 extruder: target=215 temp=215.4 pwm=0.487
Stats 2449.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=684701 bytes_read=388233 bytes_retransmit=9 bytes_invalid=0 send_seq=20198 receive_seq=20198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.252 rpi: temp=54.0 mcu_temp: temp=40.2 sd_pos=178200 sysload=0.00 cputime=54.129 memavail=1628632 print_time=2460.742 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.7 pwm=0.356
Stats 2450.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=685344 bytes_read=388649 bytes_retransmit=9 bytes_invalid=0 send_seq=20218 receive_seq=20218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.322 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=178286 sysload=0.00 cputime=54.165 memavail=1628632 print_time=2461.680 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.6 pwm=0.470
Stats 2451.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=686066 bytes_read=389041 bytes_retransmit=9 bytes_invalid=0 send_seq=20239 receive_seq=20239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.282 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=178378 sysload=0.00 cputime=54.219 memavail=1628892 print_time=2462.927 buffer_time=2.441 print_stall=0 extruder: target=215 temp=215.7 pwm=0.487
Stats 2452.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=686868 bytes_read=389463 bytes_retransmit=9 bytes_invalid=0 send_seq=20260 receive_seq=20260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=178465 sysload=0.00 cputime=54.273 memavail=1628832 print_time=2463.557 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.7 pwm=0.465
Stats 2453.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=687686 bytes_read=389910 bytes_retransmit=9 bytes_invalid=0 send_seq=20284 receive_seq=20284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.166 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=178639 sysload=0.00 cputime=54.310 memavail=1628840 print_time=2464.499 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.7 pwm=0.407
Stats 2454.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=688694 bytes_read=390322 bytes_retransmit=9 bytes_invalid=0 send_seq=20309 receive_seq=20309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=178872 sysload=0.00 cputime=54.349 memavail=1628820 print_time=2466.057 buffer_time=2.570 print_stall=0 extruder: target=215 temp=215.7 pwm=0.494
Stats 2455.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=689364 bytes_read=390724 bytes_retransmit=9 bytes_invalid=0 send_seq=20329 receive_seq=20329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.8 pwm=0.682 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=178992 sysload=0.00 cputime=54.409 memavail=1628900 print_time=2466.836 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.7 pwm=0.481
Stats 2456.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=690024 bytes_read=391140 bytes_retransmit=9 bytes_invalid=0 send_seq=20349 receive_seq=20349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.257 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=179111 sysload=0.00 cputime=54.463 memavail=1628880 print_time=2467.654 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.9 pwm=0.371
Stats 2457.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=690592 bytes_read=391532 bytes_retransmit=9 bytes_invalid=0 send_seq=20367 receive_seq=20367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=179233 sysload=0.00 cputime=54.519 memavail=1628696 print_time=2468.713 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.7 pwm=0.485
Stats 2458.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=691912 bytes_read=391994 bytes_retransmit=9 bytes_invalid=0 send_seq=20399 receive_seq=20399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=179426 sysload=0.00 cputime=54.582 memavail=1628940 print_time=2470.250 buffer_time=2.761 print_stall=0 extruder: target=215 temp=215.6 pwm=0.528
Stats 2459.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=692418 bytes_read=392400 bytes_retransmit=9 bytes_invalid=0 send_seq=20417 receive_seq=20417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.011 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=179486 sysload=0.00 cputime=54.639 memavail=1629268 print_time=2470.647 buffer_time=2.157 print_stall=0 extruder: target=215 temp=215.5 pwm=0.550
Stats 2460.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=693006 bytes_read=392777 bytes_retransmit=9 bytes_invalid=0 send_seq=20435 receive_seq=20435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.8 pwm=0.813 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=179572 sysload=0.00 cputime=54.674 memavail=1629612 print_time=2471.622 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.6 pwm=0.488
Stats 2461.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=693618 bytes_read=393174 bytes_retransmit=9 bytes_invalid=0 send_seq=20454 receive_seq=20454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=179656 sysload=0.00 cputime=54.734 memavail=1629568 print_time=2472.622 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.5 pwm=0.524
Stats 2462.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=694320 bytes_read=393615 bytes_retransmit=9 bytes_invalid=0 send_seq=20476 receive_seq=20476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=179771 sysload=0.00 cputime=54.794 memavail=1629836 print_time=2473.654 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.3 pwm=0.586
Stats 2463.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=695442 bytes_read=394042 bytes_retransmit=9 bytes_invalid=0 send_seq=20504 receive_seq=20504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=180276 sysload=0.00 cputime=54.859 memavail=1630132 print_time=2474.731 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.4 pwm=0.454
Stats 2464.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=696321 bytes_read=394459 bytes_retransmit=9 bytes_invalid=0 send_seq=20527 receive_seq=20527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.8 pwm=0.962 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=180780 sysload=0.00 cputime=54.922 memavail=1630156 print_time=2475.559 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.4 pwm=0.451
Stats 2465.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=697514 bytes_read=394925 bytes_retransmit=9 bytes_invalid=0 send_seq=20557 receive_seq=20557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=181620 sysload=0.00 cputime=54.994 memavail=1630392 print_time=2476.678 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.3 pwm=0.479
Stats 2466.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=698499 bytes_read=395337 bytes_retransmit=9 bytes_invalid=0 send_seq=20582 receive_seq=20582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=182123 sysload=0.00 cputime=55.057 memavail=1630644 print_time=2477.661 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.2 pwm=0.460
Stats 2467.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=699484 bytes_read=395774 bytes_retransmit=9 bytes_invalid=0 send_seq=20606 receive_seq=20606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=54.8 pwm=0.823 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=182870 sysload=0.00 cputime=55.126 memavail=1630652 print_time=2478.499 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.3 pwm=0.479
Stats 2468.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=700314 bytes_read=396210 bytes_retransmit=9 bytes_invalid=0 send_seq=20630 receive_seq=20630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=183351 sysload=0.00 cputime=55.195 memavail=1630640 print_time=2479.598 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.3 pwm=0.460
Stats 2469.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=701193 bytes_read=396607 bytes_retransmit=9 bytes_invalid=0 send_seq=20652 receive_seq=20652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.9 pwm=0.348 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=183825 sysload=0.00 cputime=55.234 memavail=1629660 print_time=2480.605 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.2 pwm=0.510
Stats 2470.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=702427 bytes_read=397049 bytes_retransmit=9 bytes_invalid=0 send_seq=20680 receive_seq=20680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=184785 sysload=0.00 cputime=55.280 memavail=1629716 print_time=2481.580 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.2 pwm=0.438
Stats 2471.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=703583 bytes_read=397500 bytes_retransmit=9 bytes_invalid=0 send_seq=20707 receive_seq=20707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.0 pwm=0.411 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=185041 sysload=0.00 cputime=55.338 memavail=1629716 print_time=2482.668 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.0 pwm=0.573
Stats 2472.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000026 mcu_task_stddev=0.000068 bytes_write=704424 bytes_read=397912 bytes_retransmit=9 bytes_invalid=0 send_seq=20729 receive_seq=20729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=55.1 pwm=0.197 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=185245 sysload=0.00 cputime=55.395 memavail=1629684 print_time=2483.623 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.573
Stats 2473.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000026 mcu_task_stddev=0.000068 bytes_write=705382 bytes_read=398344 bytes_retransmit=9 bytes_invalid=0 send_seq=20755 receive_seq=20755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=185363 sysload=0.00 cputime=55.456 memavail=1629732 print_time=2484.700 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.551
Stats 2474.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000026 mcu_task_stddev=0.000068 bytes_write=706329 bytes_read=398785 bytes_retransmit=9 bytes_invalid=0 send_seq=20780 receive_seq=20780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.1 pwm=0.118 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=185510 sysload=0.00 cputime=55.515 memavail=1629416 print_time=2485.873 buffer_time=2.373 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 2475.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000026 mcu_task_stddev=0.000068 bytes_write=707292 bytes_read=399197 bytes_retransmit=9 bytes_invalid=0 send_seq=20805 receive_seq=20805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=185655 sysload=0.00 cputime=55.575 memavail=1629408 print_time=2487.082 buffer_time=2.581 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 2476.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000026 mcu_task_stddev=0.000068 bytes_write=707989 bytes_read=399599 bytes_retransmit=9 bytes_invalid=0 send_seq=20825 receive_seq=20825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.9 pwm=0.669 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=185745 sysload=0.00 cputime=55.633 memavail=1629428 print_time=2487.698 buffer_time=2.197 print_stall=0 extruder: target=215 temp=214.8 pwm=0.599
Stats 2477.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=708943 bytes_read=400060 bytes_retransmit=9 bytes_invalid=0 send_seq=20851 receive_seq=20851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=185888 sysload=0.00 cputime=55.689 memavail=1629664 print_time=2488.921 buffer_time=2.419 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 2478.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=709630 bytes_read=400447 bytes_retransmit=9 bytes_invalid=0 send_seq=20871 receive_seq=20871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=185945 sysload=0.00 cputime=55.746 memavail=1629684 print_time=2489.532 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.9 pwm=0.461
Stats 2479.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=710694 bytes_read=400889 bytes_retransmit=9 bytes_invalid=0 send_seq=20899 receive_seq=20899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=186120 sysload=0.00 cputime=55.805 memavail=1629160 print_time=2490.739 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.7 pwm=0.586
Stats 2480.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=711627 bytes_read=401325 bytes_retransmit=9 bytes_invalid=0 send_seq=20923 receive_seq=20923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=54.8 pwm=0.897 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=186238 sysload=0.00 cputime=55.863 memavail=1629172 print_time=2491.872 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.6 pwm=0.641
Stats 2481.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=712587 bytes_read=401737 bytes_retransmit=9 bytes_invalid=0 send_seq=20948 receive_seq=20948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.9 pwm=0.471 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=186385 sysload=0.00 cputime=55.923 memavail=1628932 print_time=2492.954 buffer_time=2.449 print_stall=0 extruder: target=215 temp=214.7 pwm=0.472
Stats 2482.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=713511 bytes_read=402174 bytes_retransmit=9 bytes_invalid=0 send_seq=20972 receive_seq=20972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=186501 sysload=0.00 cputime=55.981 memavail=1629172 print_time=2493.933 buffer_time=2.428 print_stall=0 extruder: target=215 temp=214.7 pwm=0.472
Stats 2483.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=714299 bytes_read=402600 bytes_retransmit=9 bytes_invalid=0 send_seq=20994 receive_seq=20994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=186651 sysload=0.00 cputime=56.041 memavail=1629172 print_time=2494.776 buffer_time=2.270 print_stall=0 extruder: target=215 temp=214.7 pwm=0.598
Stats 2484.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=715602 bytes_read=403037 bytes_retransmit=9 bytes_invalid=0 send_seq=21024 receive_seq=21024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=187174 sysload=0.00 cputime=56.104 memavail=1629188 print_time=2495.674 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.9 pwm=0.466
Stats 2485.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=716709 bytes_read=403479 bytes_retransmit=9 bytes_invalid=0 send_seq=21052 receive_seq=21052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=187891 sysload=0.00 cputime=56.175 memavail=1629128 print_time=2496.575 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 2486.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=717750 bytes_read=403920 bytes_retransmit=9 bytes_invalid=0 send_seq=21077 receive_seq=21077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=188659 sysload=0.00 cputime=56.241 memavail=1628876 print_time=2497.621 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.8 pwm=0.562
Stats 2487.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=718853 bytes_read=404357 bytes_retransmit=9 bytes_invalid=0 send_seq=21104 receive_seq=21104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.436 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=189317 sysload=0.00 cputime=56.306 memavail=1629120 print_time=2498.533 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 2488.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=719818 bytes_read=404799 bytes_retransmit=9 bytes_invalid=0 send_seq=21129 receive_seq=21129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=190042 sysload=0.00 cputime=56.375 memavail=1629368 print_time=2499.598 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 2489.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=720833 bytes_read=405230 bytes_retransmit=9 bytes_invalid=0 send_seq=21155 receive_seq=21155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.533 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=190690 sysload=0.00 cputime=56.441 memavail=1628880 print_time=2500.746 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 2490.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=721840 bytes_read=405637 bytes_retransmit=9 bytes_invalid=0 send_seq=21179 receive_seq=21179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=10 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=191592 sysload=0.00 cputime=56.486 memavail=1629120 print_time=2501.681 buffer_time=2.171 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 2491.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=722494 bytes_read=406049 bytes_retransmit=9 bytes_invalid=0 send_seq=21198 receive_seq=21198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=192006 sysload=0.00 cputime=56.546 memavail=1628812 print_time=2502.564 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 2492.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=723851 bytes_read=406520 bytes_retransmit=9 bytes_invalid=0 send_seq=21229 receive_seq=21229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=192252 sysload=0.00 cputime=56.607 memavail=1628828 print_time=2503.689 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 2493.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=724765 bytes_read=406927 bytes_retransmit=9 bytes_invalid=0 send_seq=21253 receive_seq=21253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=192402 sysload=0.00 cputime=56.661 memavail=1629252 print_time=2504.621 buffer_time=2.109 print_stall=0 extruder: target=215 temp=214.7 pwm=0.628
Stats 2494.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=725730 bytes_read=407379 bytes_retransmit=9 bytes_invalid=0 send_seq=21280 receive_seq=21280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=192583 sysload=0.00 cputime=56.721 memavail=1629004 print_time=2505.681 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.8 pwm=0.566
Stats 2495.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=726681 bytes_read=407812 bytes_retransmit=9 bytes_invalid=0 send_seq=21307 receive_seq=21307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.106 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=192735 sysload=0.00 cputime=56.767 memavail=1628940 print_time=2506.825 buffer_time=2.312 print_stall=0 extruder: target=215 temp=214.7 pwm=0.604
Stats 2496.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=727666 bytes_read=408224 bytes_retransmit=9 bytes_invalid=0 send_seq=21334 receive_seq=21334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=192885 sysload=0.00 cputime=56.827 memavail=1628960 print_time=2508.054 buffer_time=2.541 print_stall=0 extruder: target=215 temp=214.7 pwm=0.544
Stats 2497.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=728394 bytes_read=408659 bytes_retransmit=9 bytes_invalid=0 send_seq=21357 receive_seq=21357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=192946 sysload=0.00 cputime=56.886 memavail=1628692 print_time=2508.674 buffer_time=2.160 print_stall=0 extruder: target=215 temp=214.7 pwm=0.530
Stats 2498.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=729396 bytes_read=409079 bytes_retransmit=9 bytes_invalid=0 send_seq=21383 receive_seq=21383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.525 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=193095 sysload=0.00 cputime=56.946 memavail=1628636 print_time=2509.934 buffer_time=2.419 print_stall=0 extruder: target=215 temp=214.5 pwm=0.613
Stats 2499.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=730070 bytes_read=409472 bytes_retransmit=9 bytes_invalid=0 send_seq=21405 receive_seq=21405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.532 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=193155 sysload=0.00 cputime=57.003 memavail=1628416 print_time=2510.564 buffer_time=2.047 print_stall=0 extruder: target=215 temp=214.4 pwm=0.634
Stats 2500.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=731110 bytes_read=409924 bytes_retransmit=9 bytes_invalid=0 send_seq=21432 receive_seq=21432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=193276 sysload=0.00 cputime=57.041 memavail=1628848 print_time=2511.805 buffer_time=2.289 print_stall=0 extruder: target=215 temp=214.4 pwm=0.631
Stats 2501.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=732035 bytes_read=410345 bytes_retransmit=9 bytes_invalid=0 send_seq=21456 receive_seq=21456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=193427 sysload=0.00 cputime=57.099 memavail=1628864 print_time=2513.016 buffer_time=2.499 print_stall=0 extruder: target=215 temp=214.4 pwm=0.616
Stats 2502.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=732678 bytes_read=410742 bytes_retransmit=9 bytes_invalid=0 send_seq=21475 receive_seq=21475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.520 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=193489 sysload=0.00 cputime=57.153 memavail=1629176 print_time=2513.573 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.3 pwm=0.616
Stats 2503.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=733650 bytes_read=411199 bytes_retransmit=9 bytes_invalid=0 send_seq=21503 receive_seq=21503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=193611 sysload=0.00 cputime=57.215 memavail=1629100 print_time=2514.649 buffer_time=2.131 print_stall=0 extruder: target=215 temp=214.5 pwm=0.439
Stats 2504.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=734540 bytes_read=411620 bytes_retransmit=9 bytes_invalid=0 send_seq=21527 receive_seq=21527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=193759 sysload=0.00 cputime=57.273 memavail=1628928 print_time=2515.599 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.4 pwm=0.541
Stats 2505.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=736172 bytes_read=412092 bytes_retransmit=9 bytes_invalid=0 send_seq=21564 receive_seq=21564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.051 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=194269 sysload=0.00 cputime=57.340 memavail=1628852 print_time=2516.945 buffer_time=2.425 print_stall=0 extruder: target=215 temp=214.4 pwm=0.541
Stats 2506.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=737200 bytes_read=412534 bytes_retransmit=9 bytes_invalid=0 send_seq=21589 receive_seq=21589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=194407 sysload=0.00 cputime=57.401 memavail=1628868 print_time=2517.790 buffer_time=2.270 print_stall=0 extruder: target=215 temp=214.5 pwm=0.541
Stats 2507.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=737750 bytes_read=412940 bytes_retransmit=9 bytes_invalid=0 send_seq=21607 receive_seq=21607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=194488 sysload=0.00 cputime=57.445 memavail=1628612 print_time=2518.559 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.6 pwm=0.485
Stats 2508.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=738414 bytes_read=413337 bytes_retransmit=9 bytes_invalid=0 send_seq=21629 receive_seq=21629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.539 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=194574 sysload=0.00 cputime=57.508 memavail=1628748 print_time=2519.534 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.8 pwm=0.439
Stats 2509.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=739069 bytes_read=413754 bytes_retransmit=9 bytes_invalid=0 send_seq=21649 receive_seq=21649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=194722 sysload=0.00 cputime=57.551 memavail=1628476 print_time=2520.745 buffer_time=2.223 print_stall=0 extruder: target=215 temp=214.7 pwm=0.581
Stats 2510.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=739666 bytes_read=414145 bytes_retransmit=9 bytes_invalid=0 send_seq=21667 receive_seq=21667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=194809 sysload=0.00 cputime=57.588 memavail=1628428 print_time=2521.682 buffer_time=2.159 print_stall=0 extruder: target=215 temp=214.9 pwm=0.465
Stats 2511.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=740356 bytes_read=414537 bytes_retransmit=9 bytes_invalid=0 send_seq=21688 receive_seq=21688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=194923 sysload=0.00 cputime=57.648 memavail=1628688 print_time=2522.962 buffer_time=2.438 print_stall=0 extruder: target=215 temp=214.9 pwm=0.560
Stats 2512.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=741318 bytes_read=415009 bytes_retransmit=9 bytes_invalid=0 send_seq=21716 receive_seq=21716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=195018 sysload=0.00 cputime=57.712 memavail=1628644 print_time=2523.697 buffer_time=2.172 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 2513.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=742397 bytes_read=415450 bytes_retransmit=9 bytes_invalid=0 send_seq=21744 receive_seq=21744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.199 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=195254 sysload=0.00 cputime=57.778 memavail=1628936 print_time=2525.020 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 2514.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=743261 bytes_read=415873 bytes_retransmit=9 bytes_invalid=0 send_seq=21769 receive_seq=21769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=195434 sysload=0.00 cputime=57.817 memavail=1628944 print_time=2526.007 buffer_time=2.482 print_stall=0 extruder: target=215 temp=215.2 pwm=0.476
Stats 2515.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=743960 bytes_read=416290 bytes_retransmit=9 bytes_invalid=0 send_seq=21789 receive_seq=21789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=195552 sysload=0.00 cputime=57.855 memavail=1628684 print_time=2526.798 buffer_time=2.272 print_stall=0 extruder: target=215 temp=215.4 pwm=0.403
Stats 2516.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=744885 bytes_read=416716 bytes_retransmit=9 bytes_invalid=0 send_seq=21814 receive_seq=21814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=195732 sysload=0.00 cputime=57.915 memavail=1629140 print_time=2527.785 buffer_time=2.259 print_stall=0 extruder: target=215 temp=215.5 pwm=0.411
Stats 2517.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=745577 bytes_read=417123 bytes_retransmit=9 bytes_invalid=0 send_seq=21835 receive_seq=21835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=195851 sysload=0.00 cputime=57.976 memavail=1628888 print_time=2528.767 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.6 pwm=0.324
Stats 2518.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=746262 bytes_read=417545 bytes_retransmit=9 bytes_invalid=0 send_seq=21856 receive_seq=21856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.658 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=195936 sysload=0.00 cputime=58.040 memavail=1628868 print_time=2529.786 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.5 pwm=0.498
Stats 2519.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=746878 bytes_read=417956 bytes_retransmit=9 bytes_invalid=0 send_seq=21878 receive_seq=21878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.068 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=195999 sysload=0.00 cputime=58.097 memavail=1629368 print_time=2530.679 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.6 pwm=0.424
Stats 2520.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=748038 bytes_read=418388 bytes_retransmit=9 bytes_invalid=0 send_seq=21907 receive_seq=21907 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=196202 sysload=0.00 cputime=58.140 memavail=1629144 print_time=2531.625 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.5 pwm=0.518
Stats 2521.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=748986 bytes_read=418835 bytes_retransmit=9 bytes_invalid=0 send_seq=21933 receive_seq=21933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=196375 sysload=0.00 cputime=58.204 memavail=1628964 print_time=2533.030 buffer_time=2.500 print_stall=0 extruder: target=215 temp=215.6 pwm=0.425
Stats 2522.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=749632 bytes_read=419246 bytes_retransmit=9 bytes_invalid=0 send_seq=21952 receive_seq=21952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.494 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=196493 sysload=0.00 cputime=58.261 memavail=1628940 print_time=2533.809 buffer_time=2.278 print_stall=0 extruder: target=215 temp=215.7 pwm=0.334
Stats 2523.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=750320 bytes_read=419643 bytes_retransmit=9 bytes_invalid=0 send_seq=21974 receive_seq=21974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.234 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=196613 sysload=0.00 cputime=58.325 memavail=1628868 print_time=2534.588 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.5 pwm=0.469
Stats 2524.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=751042 bytes_read=420060 bytes_retransmit=9 bytes_invalid=0 send_seq=21994 receive_seq=21994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=196792 sysload=0.00 cputime=58.364 memavail=1628948 print_time=2536.070 buffer_time=2.539 print_stall=0 extruder: target=215 temp=215.5 pwm=0.469
Stats 2525.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=751740 bytes_read=420466 bytes_retransmit=9 bytes_invalid=0 send_seq=22015 receive_seq=22015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=196927 sysload=0.00 cputime=58.427 memavail=1628940 print_time=2536.891 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.5 pwm=0.447
Stats 2526.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=752858 bytes_read=420888 bytes_retransmit=9 bytes_invalid=0 send_seq=22042 receive_seq=22042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=197047 sysload=0.00 cputime=58.493 memavail=1629496 print_time=2538.002 buffer_time=2.470 print_stall=0 extruder: target=215 temp=215.6 pwm=0.416
Stats 2527.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=753448 bytes_read=421315 bytes_retransmit=9 bytes_invalid=0 send_seq=22061 receive_seq=22061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=197137 sysload=0.00 cputime=58.554 memavail=1629504 print_time=2538.709 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.4 pwm=0.560
Stats 2528.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=754053 bytes_read=421706 bytes_retransmit=9 bytes_invalid=0 send_seq=22079 receive_seq=22079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=197220 sysload=0.00 cputime=58.619 memavail=1629584 print_time=2539.728 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.3 pwm=0.485
Stats 2529.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=754644 bytes_read=422093 bytes_retransmit=9 bytes_invalid=0 send_seq=22099 receive_seq=22099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=197333 sysload=0.00 cputime=58.681 memavail=1629068 print_time=2540.741 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.4 pwm=0.532
Stats 2530.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=755334 bytes_read=422520 bytes_retransmit=9 bytes_invalid=0 send_seq=22121 receive_seq=22121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=197451 sysload=0.00 cputime=58.723 memavail=1629092 print_time=2541.800 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.5 pwm=0.441
Stats 2531.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=756406 bytes_read=422961 bytes_retransmit=9 bytes_invalid=0 send_seq=22149 receive_seq=22149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.368 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=197973 sysload=0.00 cputime=58.787 memavail=1628828 print_time=2542.552 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.2 pwm=0.616
Stats 2532.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=757337 bytes_read=423383 bytes_retransmit=9 bytes_invalid=0 send_seq=22173 receive_seq=22173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=198651 sysload=0.00 cputime=58.858 memavail=1628776 print_time=2543.637 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.3 pwm=0.529
Stats 2533.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=758573 bytes_read=423850 bytes_retransmit=9 bytes_invalid=0 send_seq=22203 receive_seq=22203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=199526 sysload=0.00 cputime=58.937 memavail=1629024 print_time=2544.804 buffer_time=2.264 print_stall=0 extruder: target=215 temp=215.3 pwm=0.547
Stats 2534.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=759461 bytes_read=424271 bytes_retransmit=9 bytes_invalid=0 send_seq=22227 receive_seq=22227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.732 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=200082 sysload=0.00 cputime=58.990 memavail=1629104 print_time=2545.661 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.3 pwm=0.480
Stats 2535.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=760516 bytes_read=424683 bytes_retransmit=9 bytes_invalid=0 send_seq=22252 receive_seq=22252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=200766 sysload=0.00 cputime=59.056 memavail=1629332 print_time=2546.559 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.1 pwm=0.637
Stats 2536.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=761538 bytes_read=425125 bytes_retransmit=9 bytes_invalid=0 send_seq=22277 receive_seq=22277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=201242 sysload=0.00 cputime=59.127 memavail=1629332 print_time=2547.725 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.1 pwm=0.559
Stats 2537.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=762210 bytes_read=425546 bytes_retransmit=9 bytes_invalid=0 send_seq=22298 receive_seq=22298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=201662 sysload=0.00 cputime=59.196 memavail=1629100 print_time=2548.561 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.0 pwm=0.593
Stats 2538.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=763675 bytes_read=425993 bytes_retransmit=9 bytes_invalid=0 send_seq=22330 receive_seq=22330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=10 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=202722 sysload=0.00 cputime=59.278 memavail=1629092 print_time=2549.736 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 2539.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=764897 bytes_read=426460 bytes_retransmit=9 bytes_invalid=0 send_seq=22360 receive_seq=22360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.275 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=202960 sysload=0.00 cputime=59.344 memavail=1628600 print_time=2550.791 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 2540.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=765756 bytes_read=426881 bytes_retransmit=9 bytes_invalid=0 send_seq=22384 receive_seq=22384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=203076 sysload=0.00 cputime=59.395 memavail=1628836 print_time=2551.716 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 2541.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=766649 bytes_read=427283 bytes_retransmit=9 bytes_invalid=0 send_seq=22407 receive_seq=22407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.025 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=203223 sysload=0.00 cputime=59.460 memavail=1629104 print_time=2552.767 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 2542.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=767602 bytes_read=427750 bytes_retransmit=9 bytes_invalid=0 send_seq=22434 receive_seq=22434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.051 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=203340 sysload=0.00 cputime=59.524 memavail=1629340 print_time=2553.870 buffer_time=2.322 print_stall=0 extruder: target=215 temp=214.9 pwm=0.580
Stats 2543.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=768656 bytes_read=428196 bytes_retransmit=9 bytes_invalid=0 send_seq=22463 receive_seq=22463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.416 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=203485 sysload=0.00 cputime=59.592 memavail=1629420 print_time=2555.039 buffer_time=2.491 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 2544.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=769340 bytes_read=428593 bytes_retransmit=9 bytes_invalid=0 send_seq=22485 receive_seq=22485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=203543 sysload=0.00 cputime=59.649 memavail=1629652 print_time=2555.635 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 2545.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=770383 bytes_read=429050 bytes_retransmit=9 bytes_invalid=0 send_seq=22513 receive_seq=22513 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=203690 sysload=0.00 cputime=59.710 memavail=1629164 print_time=2556.836 buffer_time=2.286 print_stall=0 extruder: target=215 temp=214.7 pwm=0.571
Stats 2546.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=771365 bytes_read=429486 bytes_retransmit=9 bytes_invalid=0 send_seq=22540 receive_seq=22540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=54.0 mcu_temp: temp=40.4 sd_pos=203835 sysload=0.00 cputime=59.775 memavail=1629180 print_time=2558.021 buffer_time=2.470 print_stall=0 extruder: target=215 temp=214.9 pwm=0.418
Stats 2547.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=772048 bytes_read=429893 bytes_retransmit=9 bytes_invalid=0 send_seq=22561 receive_seq=22561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=203894 sysload=0.00 cputime=59.833 memavail=1628912 print_time=2558.603 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.7 pwm=0.583
Stats 2548.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=773081 bytes_read=430345 bytes_retransmit=9 bytes_invalid=0 send_seq=22588 receive_seq=22588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=204010 sysload=0.00 cputime=59.898 memavail=1629176 print_time=2559.727 buffer_time=2.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.449
Stats 2549.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=774090 bytes_read=430786 bytes_retransmit=9 bytes_invalid=0 send_seq=22616 receive_seq=22616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=204128 sysload=0.00 cputime=59.962 memavail=1629160 print_time=2560.799 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.7 pwm=0.582
Stats 2550.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=775033 bytes_read=431203 bytes_retransmit=9 bytes_invalid=0 send_seq=22642 receive_seq=22642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=204244 sysload=0.00 cputime=60.008 memavail=1629188 print_time=2561.772 buffer_time=2.217 print_stall=0 extruder: target=215 temp=214.8 pwm=0.521
Stats 2551.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=775867 bytes_read=431635 bytes_retransmit=9 bytes_invalid=0 send_seq=22665 receive_seq=22665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.736 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=204357 sysload=0.00 cputime=60.068 memavail=1628932 print_time=2562.625 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.8 pwm=0.521
Stats 2552.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=777548 bytes_read=432141 bytes_retransmit=9 bytes_invalid=0 send_seq=22703 receive_seq=22703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=205009 sysload=0.00 cputime=60.137 memavail=1629192 print_time=2563.894 buffer_time=2.336 print_stall=0 extruder: target=215 temp=214.8 pwm=0.486
Stats 2553.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=778347 bytes_read=432543 bytes_retransmit=9 bytes_invalid=0 send_seq=22726 receive_seq=22726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.429 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=205572 sysload=0.00 cputime=60.203 memavail=1629196 print_time=2564.672 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.8 pwm=0.540
Stats 2554.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=779317 bytes_read=432990 bytes_retransmit=9 bytes_invalid=0 send_seq=22752 receive_seq=22752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.193 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=206159 sysload=0.00 cputime=60.272 memavail=1629204 print_time=2565.604 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 2555.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=780575 bytes_read=433424 bytes_retransmit=9 bytes_invalid=0 send_seq=22780 receive_seq=22780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=207011 sysload=0.00 cputime=60.351 memavail=1629196 print_time=2566.696 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 2556.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=781442 bytes_read=433815 bytes_retransmit=9 bytes_invalid=0 send_seq=22803 receive_seq=22803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.8 pwm=0.930 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=207646 sysload=0.00 cputime=60.420 memavail=1629208 print_time=2567.686 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 2557.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=782465 bytes_read=434265 bytes_retransmit=9 bytes_invalid=0 send_seq=22829 receive_seq=22829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=208446 sysload=0.00 cputime=60.492 memavail=1629448 print_time=2568.606 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.0 pwm=0.440
Stats 2558.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=783342 bytes_read=434670 bytes_retransmit=9 bytes_invalid=0 send_seq=22852 receive_seq=22852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=209000 sysload=0.00 cputime=60.563 memavail=1629448 print_time=2569.672 buffer_time=2.107 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 2559.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=784354 bytes_read=435076 bytes_retransmit=9 bytes_invalid=0 send_seq=22876 receive_seq=22876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=209551 sysload=0.00 cputime=60.630 memavail=1629212 print_time=2570.928 buffer_time=2.362 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 2560.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=785232 bytes_read=435518 bytes_retransmit=9 bytes_invalid=0 send_seq=22901 receive_seq=22901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=209702 sysload=0.00 cputime=60.678 memavail=1629460 print_time=2571.678 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.0 pwm=0.536
Stats 2561.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=786092 bytes_read=435934 bytes_retransmit=9 bytes_invalid=0 send_seq=22924 receive_seq=22924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=209824 sysload=0.00 cputime=60.736 memavail=1629432 print_time=2572.612 buffer_time=2.045 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 2562.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=787028 bytes_read=436361 bytes_retransmit=9 bytes_invalid=0 send_seq=22949 receive_seq=22949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=209973 sysload=0.00 cputime=60.781 memavail=1629192 print_time=2573.666 buffer_time=2.099 print_stall=0 extruder: target=215 temp=214.8 pwm=0.556
Stats 2563.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=788050 bytes_read=436827 bytes_retransmit=9 bytes_invalid=0 send_seq=22976 receive_seq=22976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=54.9 pwm=0.644 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=210094 sysload=0.00 cputime=60.842 memavail=1629208 print_time=2574.780 buffer_time=2.212 print_stall=0 extruder: target=215 temp=214.7 pwm=0.644
Stats 2564.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=789024 bytes_read=437244 bytes_retransmit=9 bytes_invalid=0 send_seq=23002 receive_seq=23002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=54.9 pwm=0.619 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=210242 sysload=0.00 cputime=60.904 memavail=1629208 print_time=2575.966 buffer_time=2.397 print_stall=0 extruder: target=215 temp=214.8 pwm=0.528
Stats 2565.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=790069 bytes_read=437676 bytes_retransmit=9 bytes_invalid=0 send_seq=23031 receive_seq=23031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=210359 sysload=0.08 cputime=60.966 memavail=1629232 print_time=2577.161 buffer_time=2.590 print_stall=0 extruder: target=215 temp=214.7 pwm=0.602
Stats 2566.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=790727 bytes_read=438135 bytes_retransmit=9 bytes_invalid=0 send_seq=23053 receive_seq=23053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.009 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=210449 sysload=0.08 cputime=61.011 memavail=1629224 print_time=2577.770 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.6 pwm=0.602
Stats 2567.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=791726 bytes_read=438567 bytes_retransmit=9 bytes_invalid=0 send_seq=23079 receive_seq=23079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=210631 sysload=0.08 cputime=61.073 memavail=1629148 print_time=2578.992 buffer_time=2.420 print_stall=0 extruder: target=215 temp=214.6 pwm=0.623
Stats 2568.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=792410 bytes_read=438959 bytes_retransmit=9 bytes_invalid=0 send_seq=23100 receive_seq=23100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=210693 sysload=0.08 cputime=61.129 memavail=1628912 print_time=2579.596 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.8 pwm=0.481
Stats 2569.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=793409 bytes_read=439425 bytes_retransmit=9 bytes_invalid=0 send_seq=23127 receive_seq=23127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=210845 sysload=0.08 cputime=61.191 memavail=1629428 print_time=2580.776 buffer_time=2.197 print_stall=0 extruder: target=215 temp=214.7 pwm=0.534
Stats 2570.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=794369 bytes_read=439842 bytes_retransmit=9 bytes_invalid=0 send_seq=23153 receive_seq=23153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.336 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=210967 sysload=0.07 cputime=61.237 memavail=1629156 print_time=2581.891 buffer_time=2.313 print_stall=0 extruder: target=215 temp=214.8 pwm=0.530
Stats 2571.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=795333 bytes_read=440279 bytes_retransmit=9 bytes_invalid=0 send_seq=23180 receive_seq=23180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=211118 sysload=0.07 cputime=61.298 memavail=1628848 print_time=2582.917 buffer_time=2.337 print_stall=0 extruder: target=215 temp=214.7 pwm=0.566
Stats 2572.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=796193 bytes_read=440730 bytes_retransmit=9 bytes_invalid=0 send_seq=23204 receive_seq=23204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=211300 sysload=0.07 cputime=61.360 memavail=1629032 print_time=2583.792 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.8 pwm=0.465
Stats 2573.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=797230 bytes_read=441152 bytes_retransmit=9 bytes_invalid=0 send_seq=23231 receive_seq=23231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=211522 sysload=0.07 cputime=61.421 memavail=1629316 print_time=2584.593 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.5 pwm=0.604
Stats 2574.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=798867 bytes_read=441655 bytes_retransmit=9 bytes_invalid=0 send_seq=23269 receive_seq=23269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=212385 sysload=0.07 cputime=61.495 memavail=1629048 print_time=2585.781 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.5 pwm=0.595
Stats 2575.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=799788 bytes_read=442086 bytes_retransmit=9 bytes_invalid=0 send_seq=23292 receive_seq=23292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=212966 sysload=0.07 cputime=61.564 memavail=1629052 print_time=2586.595 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.5 pwm=0.609
Stats 2576.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=801097 bytes_read=442518 bytes_retransmit=9 bytes_invalid=0 send_seq=23321 receive_seq=23321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.554 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=213775 sysload=0.07 cputime=61.636 memavail=1628816 print_time=2587.785 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.4 pwm=0.658
Stats 2577.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=802000 bytes_read=442955 bytes_retransmit=9 bytes_invalid=0 send_seq=23345 receive_seq=23345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.471 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=214419 sysload=0.07 cputime=61.706 memavail=1629064 print_time=2588.656 buffer_time=2.071 print_stall=0 extruder: target=215 temp=214.5 pwm=0.615
Stats 2578.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=803057 bytes_read=443401 bytes_retransmit=9 bytes_invalid=0 send_seq=23371 receive_seq=23371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.051 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=215039 sysload=0.07 cputime=61.770 memavail=1628820 print_time=2589.791 buffer_time=2.205 print_stall=0 extruder: target=215 temp=214.6 pwm=0.570
Stats 2579.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=803859 bytes_read=443788 bytes_retransmit=9 bytes_invalid=0 send_seq=23391 receive_seq=23391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=215763 sysload=0.07 cputime=61.839 memavail=1628800 print_time=2590.655 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.6 pwm=0.570
Stats 2580.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=804707 bytes_read=444205 bytes_retransmit=9 bytes_invalid=0 send_seq=23414 receive_seq=23414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=216382 sysload=0.06 cputime=61.890 memavail=1629068 print_time=2591.735 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.7 pwm=0.508
Stats 2581.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=805863 bytes_read=444661 bytes_retransmit=9 bytes_invalid=0 send_seq=23442 receive_seq=23442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.106 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=216702 sysload=0.06 cputime=61.955 memavail=1628744 print_time=2592.639 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.7 pwm=0.567
Stats 2582.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=807019 bytes_read=445098 bytes_retransmit=9 bytes_invalid=0 send_seq=23469 receive_seq=23469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=216912 sysload=0.06 cputime=62.015 memavail=1628572 print_time=2593.971 buffer_time=2.382 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 2583.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=807974 bytes_read=445525 bytes_retransmit=9 bytes_invalid=0 send_seq=23494 receive_seq=23494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=217063 sysload=0.06 cputime=62.076 memavail=1629056 print_time=2595.039 buffer_time=2.450 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 2584.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=808625 bytes_read=445956 bytes_retransmit=9 bytes_invalid=0 send_seq=23517 receive_seq=23517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=217123 sysload=0.06 cputime=62.136 memavail=1628940 print_time=2595.614 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.0 pwm=0.551
Stats 2585.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=809650 bytes_read=446368 bytes_retransmit=9 bytes_invalid=0 send_seq=23542 receive_seq=23542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=217268 sysload=0.06 cputime=62.198 memavail=1629196 print_time=2596.809 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.4 pwm=0.288
Stats 2586.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=810600 bytes_read=446795 bytes_retransmit=9 bytes_invalid=0 send_seq=23567 receive_seq=23567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.509 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=217420 sysload=0.06 cputime=62.258 memavail=1628948 print_time=2598.059 buffer_time=2.467 print_stall=0 extruder: target=215 temp=215.1 pwm=0.549
Stats 2587.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=811251 bytes_read=447216 bytes_retransmit=9 bytes_invalid=0 send_seq=23585 receive_seq=23585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.579 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=217511 sysload=0.06 cputime=62.315 memavail=1628892 print_time=2598.689 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.1 pwm=0.549
Stats 2588.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=812278 bytes_read=447633 bytes_retransmit=9 bytes_invalid=0 send_seq=23611 receive_seq=23611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=217632 sysload=0.06 cputime=62.376 memavail=1628876 print_time=2599.948 buffer_time=2.355 print_stall=0 extruder: target=215 temp=215.0 pwm=0.523
Stats 2589.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=813193 bytes_read=448055 bytes_retransmit=9 bytes_invalid=0 send_seq=23635 receive_seq=23635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.436 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=217753 sysload=0.06 cputime=62.437 memavail=1628896 print_time=2601.191 buffer_time=2.597 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 2590.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=813916 bytes_read=448481 bytes_retransmit=9 bytes_invalid=0 send_seq=23657 receive_seq=23657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=217813 sysload=0.05 cputime=62.498 memavail=1629124 print_time=2601.794 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 2591.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=814845 bytes_read=448883 bytes_retransmit=9 bytes_invalid=0 send_seq=23680 receive_seq=23680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=217964 sysload=0.05 cputime=62.560 memavail=1629188 print_time=2602.960 buffer_time=2.365 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 2592.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=815791 bytes_read=449320 bytes_retransmit=9 bytes_invalid=0 send_seq=23704 receive_seq=23704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.2 pwm=0.052 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=218085 sysload=0.05 cputime=62.620 memavail=1629212 print_time=2604.036 buffer_time=2.440 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 2593.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=816678 bytes_read=449756 bytes_retransmit=9 bytes_invalid=0 send_seq=23728 receive_seq=23728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.300 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=218237 sysload=0.05 cputime=62.683 memavail=1628992 print_time=2604.978 buffer_time=2.382 print_stall=0 extruder: target=215 temp=214.8 pwm=0.532
Stats 2594.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=817624 bytes_read=450163 bytes_retransmit=9 bytes_invalid=0 send_seq=23752 receive_seq=23752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=218420 sysload=0.05 cputime=62.744 memavail=1629196 print_time=2605.761 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.7 pwm=0.609
Stats 2595.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=819291 bytes_read=450640 bytes_retransmit=9 bytes_invalid=0 send_seq=23787 receive_seq=23787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=218885 sysload=0.05 cputime=62.807 memavail=1629012 print_time=2607.106 buffer_time=2.508 print_stall=0 extruder: target=215 temp=214.6 pwm=0.609
Stats 2596.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=819811 bytes_read=451046 bytes_retransmit=9 bytes_invalid=0 send_seq=23805 receive_seq=23805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=54.0 mcu_temp: temp=40.0 sd_pos=218966 sysload=0.05 cputime=62.869 memavail=1629020 print_time=2607.874 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.6 pwm=0.645
Stats 2597.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=820422 bytes_read=451438 bytes_retransmit=9 bytes_invalid=0 send_seq=23823 receive_seq=23823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.048 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=219052 sysload=0.05 cputime=62.925 memavail=1629012 print_time=2608.849 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 2598.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=820993 bytes_read=451840 bytes_retransmit=9 bytes_invalid=0 send_seq=23843 receive_seq=23843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=219140 sysload=0.05 cputime=62.982 memavail=1629224 print_time=2609.772 buffer_time=2.171 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 2599.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=821644 bytes_read=452256 bytes_retransmit=9 bytes_invalid=0 send_seq=23863 receive_seq=23863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=219259 sysload=0.05 cputime=63.043 memavail=1629456 print_time=2610.725 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 2600.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=822208 bytes_read=452628 bytes_retransmit=9 bytes_invalid=0 send_seq=23880 receive_seq=23880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=219345 sysload=0.04 cputime=63.089 memavail=1629732 print_time=2611.625 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 2601.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=823125 bytes_read=453055 bytes_retransmit=9 bytes_invalid=0 send_seq=23905 receive_seq=23905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=219466 sysload=0.04 cputime=63.149 memavail=1629716 print_time=2612.785 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 2602.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=824370 bytes_read=453541 bytes_retransmit=9 bytes_invalid=0 send_seq=23936 receive_seq=23936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=219732 sysload=0.04 cputime=63.211 memavail=1629708 print_time=2614.335 buffer_time=2.732 print_stall=0 extruder: target=215 temp=215.3 pwm=0.377
Stats 2603.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=825216 bytes_read=453943 bytes_retransmit=9 bytes_invalid=0 send_seq=23959 receive_seq=23959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.541 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=219912 sysload=0.04 cputime=63.270 memavail=1629228 print_time=2615.323 buffer_time=2.719 print_stall=0 extruder: target=215 temp=215.4 pwm=0.393
Stats 2604.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=825966 bytes_read=454350 bytes_retransmit=9 bytes_invalid=0 send_seq=23980 receive_seq=23980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=220030 sysload=0.04 cputime=63.327 memavail=1629268 print_time=2616.113 buffer_time=2.509 print_stall=0 extruder: target=215 temp=215.3 pwm=0.560
Stats 2605.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=826860 bytes_read=454791 bytes_retransmit=9 bytes_invalid=0 send_seq=24005 receive_seq=24005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.574 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=220210 sysload=0.04 cputime=63.387 memavail=1629472 print_time=2617.101 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.5 pwm=0.447
Stats 2606.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=827405 bytes_read=455158 bytes_retransmit=9 bytes_invalid=0 send_seq=24021 receive_seq=24021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=220299 sysload=0.04 cputime=63.443 memavail=1629732 print_time=2617.810 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.4 pwm=0.447
Stats 2607.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=828075 bytes_read=455575 bytes_retransmit=9 bytes_invalid=0 send_seq=24041 receive_seq=24041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=220385 sysload=0.04 cputime=63.503 memavail=1629724 print_time=2618.747 buffer_time=2.141 print_stall=0 extruder: target=215 temp=215.5 pwm=0.470
Stats 2608.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=828698 bytes_read=455986 bytes_retransmit=9 bytes_invalid=0 send_seq=24060 receive_seq=24060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.766 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=220477 sysload=0.04 cputime=63.546 memavail=1629740 print_time=2619.995 buffer_time=2.388 print_stall=0 extruder: target=215 temp=215.4 pwm=0.537
Stats 2609.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=829521 bytes_read=456378 bytes_retransmit=9 bytes_invalid=0 send_seq=24081 receive_seq=24081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=220564 sysload=0.04 cputime=63.602 memavail=1629472 print_time=2620.625 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.7 pwm=0.404
Stats 2610.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=830707 bytes_read=456835 bytes_retransmit=9 bytes_invalid=0 send_seq=24109 receive_seq=24109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=220853 sysload=0.04 cputime=63.652 memavail=1628980 print_time=2622.345 buffer_time=2.737 print_stall=0 extruder: target=215 temp=215.7 pwm=0.425
Stats 2611.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=831387 bytes_read=457231 bytes_retransmit=9 bytes_invalid=0 send_seq=24128 receive_seq=24128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=220971 sysload=0.04 cputime=63.712 memavail=1628960 print_time=2623.124 buffer_time=2.515 print_stall=0 extruder: target=215 temp=215.6 pwm=0.489
Stats 2612.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=832108 bytes_read=457638 bytes_retransmit=9 bytes_invalid=0 send_seq=24149 receive_seq=24149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=221091 sysload=0.04 cputime=63.771 memavail=1628980 print_time=2623.903 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.4 pwm=0.630
Stats 2613.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=832732 bytes_read=458045 bytes_retransmit=9 bytes_invalid=0 send_seq=24167 receive_seq=24167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=221210 sysload=0.04 cputime=63.830 memavail=1629472 print_time=2624.721 buffer_time=2.111 print_stall=0 extruder: target=215 temp=215.7 pwm=0.410
Stats 2614.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=833357 bytes_read=458439 bytes_retransmit=9 bytes_invalid=0 send_seq=24186 receive_seq=24186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=221332 sysload=0.04 cputime=63.889 memavail=1629488 print_time=2625.780 buffer_time=2.169 print_stall=0 extruder: target=215 temp=215.6 pwm=0.499
Stats 2615.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=834624 bytes_read=458855 bytes_retransmit=9 bytes_invalid=0 send_seq=24214 receive_seq=24214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.8 pwm=0.896 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=221525 sysload=0.03 cputime=63.950 memavail=1629728 print_time=2627.317 buffer_time=2.705 print_stall=0 extruder: target=215 temp=215.5 pwm=0.499
Stats 2616.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=835131 bytes_read=459250 bytes_retransmit=9 bytes_invalid=0 send_seq=24232 receive_seq=24232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=221585 sysload=0.03 cputime=64.006 memavail=1630008 print_time=2627.714 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.4 pwm=0.558
Stats 2617.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=835794 bytes_read=459665 bytes_retransmit=9 bytes_invalid=0 send_seq=24254 receive_seq=24254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.8 pwm=0.754 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=221671 sysload=0.03 cputime=64.053 memavail=1629756 print_time=2628.689 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.5 pwm=0.480
Stats 2618.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=836378 bytes_read=460030 bytes_retransmit=9 bytes_invalid=0 send_seq=24271 receive_seq=24271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=221755 sysload=0.03 cputime=64.108 memavail=1629764 print_time=2629.690 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.5 pwm=0.480
Stats 2619.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=837014 bytes_read=460442 bytes_retransmit=9 bytes_invalid=0 send_seq=24290 receive_seq=24290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.564 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=221870 sysload=0.03 cputime=64.165 memavail=1629736 print_time=2630.721 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.6 pwm=0.480
Stats 2620.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=838268 bytes_read=460898 bytes_retransmit=9 bytes_invalid=0 send_seq=24321 receive_seq=24321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.490 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=222421 sysload=0.03 cputime=64.211 memavail=1630240 print_time=2631.881 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.3 pwm=0.513
Stats 2621.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=839190 bytes_read=461310 bytes_retransmit=9 bytes_invalid=0 send_seq=24346 receive_seq=24346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=223050 sysload=0.03 cputime=64.278 memavail=1630260 print_time=2632.624 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.4 pwm=0.426
Stats 2622.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=840412 bytes_read=461792 bytes_retransmit=9 bytes_invalid=0 send_seq=24376 receive_seq=24376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=223865 sysload=0.03 cputime=64.352 memavail=1630496 print_time=2633.900 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.3 pwm=0.496
Stats 2623.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=841370 bytes_read=462213 bytes_retransmit=9 bytes_invalid=0 send_seq=24400 receive_seq=24400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.002 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=224517 sysload=0.03 cputime=64.421 memavail=1630224 print_time=2634.725 buffer_time=2.107 print_stall=0 extruder: target=215 temp=215.4 pwm=0.468
Stats 2624.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=842219 bytes_read=462620 bytes_retransmit=9 bytes_invalid=0 send_seq=24424 receive_seq=24424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=225291 sysload=0.03 cputime=64.490 memavail=1630272 print_time=2635.863 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.3 pwm=0.470
Stats 2625.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=843535 bytes_read=463097 bytes_retransmit=9 bytes_invalid=0 send_seq=24456 receive_seq=24456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.145 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=226135 sysload=0.03 cputime=64.564 memavail=1629744 print_time=2636.679 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.2 pwm=0.564
Stats 2626.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=844374 bytes_read=463508 bytes_retransmit=9 bytes_invalid=0 send_seq=24478 receive_seq=24478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=226629 sysload=0.03 cputime=64.628 memavail=1629760 print_time=2637.820 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.2 pwm=0.475
Stats 2627.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=845037 bytes_read=463905 bytes_retransmit=9 bytes_invalid=0 send_seq=24497 receive_seq=24497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.537 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=227083 sysload=0.03 cputime=64.694 memavail=1629532 print_time=2638.688 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.2 pwm=0.439
Stats 2628.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=846389 bytes_read=464387 bytes_retransmit=9 bytes_invalid=0 send_seq=24530 receive_seq=24530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=227416 sysload=0.03 cputime=64.759 memavail=1629500 print_time=2639.861 buffer_time=2.239 print_stall=0 extruder: target=215 temp=214.9 pwm=0.608
Stats 2629.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=847241 bytes_read=464808 bytes_retransmit=9 bytes_invalid=0 send_seq=24554 receive_seq=24554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=227591 sysload=0.03 cputime=64.819 memavail=1629516 print_time=2640.706 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.488
Stats 2630.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=848142 bytes_read=465215 bytes_retransmit=9 bytes_invalid=0 send_seq=24578 receive_seq=24578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=227708 sysload=0.02 cputime=64.862 memavail=1629752 print_time=2641.694 buffer_time=2.071 print_stall=0 extruder: target=215 temp=214.9 pwm=0.553
Stats 2631.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000063 bytes_write=849127 bytes_read=465667 bytes_retransmit=9 bytes_invalid=0 send_seq=24605 receive_seq=24605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.218 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=227854 sysload=0.02 cputime=64.922 memavail=1629516 print_time=2642.774 buffer_time=2.151 print_stall=0 extruder: target=215 temp=214.9 pwm=0.573
Stats 2632.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=850180 bytes_read=466123 bytes_retransmit=9 bytes_invalid=0 send_seq=24634 receive_seq=24633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=227971 sysload=0.02 cputime=64.980 memavail=1629456 print_time=2643.902 buffer_time=2.278 print_stall=0 extruder: target=215 temp=214.7 pwm=0.576
Stats 2633.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=851138 bytes_read=466545 bytes_retransmit=9 bytes_invalid=0 send_seq=24660 receive_seq=24660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=228117 sysload=0.02 cputime=65.041 memavail=1629400 print_time=2645.087 buffer_time=2.462 print_stall=0 extruder: target=215 temp=214.7 pwm=0.593
Stats 2634.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=851799 bytes_read=466967 bytes_retransmit=9 bytes_invalid=0 send_seq=24681 receive_seq=24681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.690 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=228176 sysload=0.02 cputime=65.100 memavail=1629164 print_time=2645.676 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 2635.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=852805 bytes_read=467409 bytes_retransmit=9 bytes_invalid=0 send_seq=24707 receive_seq=24707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=228293 sysload=0.02 cputime=65.160 memavail=1629396 print_time=2646.871 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.5 pwm=0.670
Stats 2636.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=853840 bytes_read=467831 bytes_retransmit=9 bytes_invalid=0 send_seq=24734 receive_seq=24734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=228438 sysload=0.02 cputime=65.220 memavail=1629160 print_time=2648.058 buffer_time=2.431 print_stall=0 extruder: target=215 temp=214.7 pwm=0.585
Stats 2637.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=854529 bytes_read=468278 bytes_retransmit=9 bytes_invalid=0 send_seq=24757 receive_seq=24757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.506 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=228496 sysload=0.02 cputime=65.278 memavail=1629644 print_time=2648.635 buffer_time=2.008 print_stall=0 extruder: target=215 temp=214.7 pwm=0.574
Stats 2638.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=855558 bytes_read=468719 bytes_retransmit=9 bytes_invalid=0 send_seq=24785 receive_seq=24785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=228642 sysload=0.02 cputime=65.340 memavail=1629664 print_time=2649.750 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.9 pwm=0.414
Stats 2639.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=856529 bytes_read=469141 bytes_retransmit=9 bytes_invalid=0 send_seq=24812 receive_seq=24812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=228756 sysload=0.02 cputime=65.400 memavail=1629392 print_time=2650.785 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.8 pwm=0.464
Stats 2640.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=857419 bytes_read=469578 bytes_retransmit=9 bytes_invalid=0 send_seq=24837 receive_seq=24836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=228903 sysload=0.02 cputime=65.461 memavail=1629724 print_time=2651.712 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 2641.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=858909 bytes_read=470039 bytes_retransmit=9 bytes_invalid=0 send_seq=24868 receive_seq=24868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=40.1 sd_pos=229448 sysload=0.02 cputime=65.527 memavail=1629720 print_time=2652.991 buffer_time=2.361 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 2642.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=859874 bytes_read=470471 bytes_retransmit=9 bytes_invalid=0 send_seq=24894 receive_seq=24894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.154 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=229968 sysload=0.02 cputime=65.593 memavail=1629736 print_time=2653.881 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 2643.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=861023 bytes_read=470928 bytes_retransmit=9 bytes_invalid=0 send_seq=24922 receive_seq=24922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=230913 sysload=0.02 cputime=65.666 memavail=1629736 print_time=2654.954 buffer_time=2.323 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 2644.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=862174 bytes_read=471374 bytes_retransmit=9 bytes_invalid=0 send_seq=24951 receive_seq=24951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=231436 sysload=0.02 cputime=65.734 memavail=1629532 print_time=2655.894 buffer_time=2.262 print_stall=0 extruder: target=215 temp=215.2 pwm=0.379
Stats 2645.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=863096 bytes_read=471781 bytes_retransmit=9 bytes_invalid=0 send_seq=24975 receive_seq=24975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.110 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=232179 sysload=0.02 cputime=65.805 memavail=1629488 print_time=2656.641 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.3 pwm=0.362
Stats 2646.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=864122 bytes_read=472228 bytes_retransmit=9 bytes_invalid=0 send_seq=25003 receive_seq=25001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=232835 sysload=0.02 cputime=65.874 memavail=1629496 print_time=2657.834 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.3 pwm=0.440
Stats 2647.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=864932 bytes_read=472674 bytes_retransmit=9 bytes_invalid=0 send_seq=25027 receive_seq=25027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=233434 sysload=0.02 cputime=65.942 memavail=1628924 print_time=2658.837 buffer_time=2.200 print_stall=0 extruder: target=215 temp=215.2 pwm=0.530
Stats 2648.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=865883 bytes_read=473091 bytes_retransmit=9 bytes_invalid=0 send_seq=25053 receive_seq=25053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=10 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=234333 sysload=0.02 cputime=66.011 memavail=1628936 print_time=2659.895 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.1 pwm=0.548
Stats 2649.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=867218 bytes_read=473563 bytes_retransmit=9 bytes_invalid=0 send_seq=25084 receive_seq=25084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.215 rpi: temp=54.5 mcu_temp: temp=40.0 sd_pos=234517 sysload=0.02 cputime=66.059 memavail=1629176 print_time=2660.913 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.1 pwm=0.548
Stats 2650.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=868107 bytes_read=473994 bytes_retransmit=9 bytes_invalid=0 send_seq=25110 receive_seq=25110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=234666 sysload=0.02 cputime=66.103 memavail=1629956 print_time=2661.790 buffer_time=2.151 print_stall=0 extruder: target=215 temp=214.9 pwm=0.606
Stats 2651.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=869014 bytes_read=474406 bytes_retransmit=9 bytes_invalid=0 send_seq=25135 receive_seq=25135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=234787 sysload=0.02 cputime=66.165 memavail=1629752 print_time=2662.790 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 2652.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=870042 bytes_read=474873 bytes_retransmit=9 bytes_invalid=0 send_seq=25162 receive_seq=25162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.471 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=234939 sysload=0.02 cputime=66.224 memavail=1629764 print_time=2663.893 buffer_time=2.254 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 2653.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=870983 bytes_read=475294 bytes_retransmit=9 bytes_invalid=0 send_seq=25186 receive_seq=25186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=235061 sysload=0.02 cputime=66.286 memavail=1629496 print_time=2665.046 buffer_time=2.406 print_stall=0 extruder: target=215 temp=214.5 pwm=0.703
Stats 2654.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=871646 bytes_read=475691 bytes_retransmit=9 bytes_invalid=0 send_seq=25208 receive_seq=25208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.575 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=235149 sysload=0.02 cputime=66.344 memavail=1629764 print_time=2665.648 buffer_time=2.008 print_stall=0 extruder: target=215 temp=214.7 pwm=0.496
Stats 2655.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=872648 bytes_read=476143 bytes_retransmit=9 bytes_invalid=0 send_seq=25235 receive_seq=25235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.049 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=235271 sysload=0.02 cputime=66.407 memavail=1630020 print_time=2666.840 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.7 pwm=0.599
Stats 2656.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=873708 bytes_read=476579 bytes_retransmit=9 bytes_invalid=0 send_seq=25262 receive_seq=25262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.672 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=235420 sysload=0.02 cputime=66.467 memavail=1629704 print_time=2668.067 buffer_time=2.426 print_stall=0 extruder: target=215 temp=214.4 pwm=0.689
Stats 2657.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=874316 bytes_read=476976 bytes_retransmit=9 bytes_invalid=0 send_seq=25281 receive_seq=25281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.554 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=235512 sysload=0.02 cputime=66.528 memavail=1629704 print_time=2668.667 buffer_time=2.025 print_stall=0 extruder: target=215 temp=214.5 pwm=0.608
Stats 2658.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=875353 bytes_read=477438 bytes_retransmit=9 bytes_invalid=0 send_seq=25310 receive_seq=25310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=235632 sysload=0.02 cputime=66.577 memavail=1629468 print_time=2669.842 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.5 pwm=0.598
Stats 2659.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=876359 bytes_read=477869 bytes_retransmit=9 bytes_invalid=0 send_seq=25336 receive_seq=25336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=235812 sysload=0.02 cputime=66.638 memavail=1629452 print_time=2670.999 buffer_time=2.356 print_stall=0 extruder: target=215 temp=214.3 pwm=0.672
Stats 2660.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=877231 bytes_read=478281 bytes_retransmit=9 bytes_invalid=0 send_seq=25361 receive_seq=25361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=235933 sysload=0.01 cputime=66.699 memavail=1629464 print_time=2672.040 buffer_time=2.396 print_stall=0 extruder: target=215 temp=214.5 pwm=0.550
Stats 2661.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=878190 bytes_read=478738 bytes_retransmit=9 bytes_invalid=0 send_seq=25389 receive_seq=25389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=236116 sysload=0.01 cputime=66.763 memavail=1629216 print_time=2672.979 buffer_time=2.334 print_stall=0 extruder: target=215 temp=214.5 pwm=0.511
Stats 2662.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=879013 bytes_read=479164 bytes_retransmit=9 bytes_invalid=0 send_seq=25411 receive_seq=25411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=236300 sysload=0.01 cputime=66.825 memavail=1629464 print_time=2673.709 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.5 pwm=0.495
Stats 2663.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=880515 bytes_read=479621 bytes_retransmit=9 bytes_invalid=0 send_seq=25445 receive_seq=25445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=236798 sysload=0.01 cputime=66.893 memavail=1629212 print_time=2674.995 buffer_time=2.349 print_stall=0 extruder: target=215 temp=214.5 pwm=0.483
Stats 2664.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=881059 bytes_read=480023 bytes_retransmit=9 bytes_invalid=0 send_seq=25462 receive_seq=25462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=54.0 mcu_temp: temp=39.9 sd_pos=236879 sysload=0.01 cputime=66.955 memavail=1629732 print_time=2675.764 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.5 pwm=0.601
Stats 2665.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=881683 bytes_read=480419 bytes_retransmit=9 bytes_invalid=0 send_seq=25481 receive_seq=25481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=236965 sysload=0.17 cputime=67.018 memavail=1629740 print_time=2676.739 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.5 pwm=0.601
Stats 2666.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=882207 bytes_read=480801 bytes_retransmit=9 bytes_invalid=0 send_seq=25500 receive_seq=25500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=237053 sysload=0.17 cputime=67.077 memavail=1629724 print_time=2677.661 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.7 pwm=0.478
Stats 2667.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=882918 bytes_read=481238 bytes_retransmit=9 bytes_invalid=0 send_seq=25521 receive_seq=25521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=237200 sysload=0.17 cputime=67.142 memavail=1629732 print_time=2678.887 buffer_time=2.240 print_stall=0 extruder: target=215 temp=214.7 pwm=0.470
Stats 2668.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=883570 bytes_read=481634 bytes_retransmit=9 bytes_invalid=0 send_seq=25540 receive_seq=25540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.450 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=237314 sysload=0.17 cputime=67.207 memavail=1629728 print_time=2680.166 buffer_time=2.516 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 2669.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=884303 bytes_read=482026 bytes_retransmit=9 bytes_invalid=0 send_seq=25561 receive_seq=25561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=237379 sysload=0.17 cputime=67.266 memavail=1629740 print_time=2680.674 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.1 pwm=0.362
Stats 2670.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=885570 bytes_read=482503 bytes_retransmit=9 bytes_invalid=0 send_seq=25593 receive_seq=25593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.474 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=237645 sysload=0.16 cputime=67.317 memavail=1629728 print_time=2682.225 buffer_time=2.570 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 2671.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=886372 bytes_read=482914 bytes_retransmit=9 bytes_invalid=0 send_seq=25615 receive_seq=25615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=237825 sysload=0.16 cputime=67.377 memavail=1629476 print_time=2683.212 buffer_time=2.555 print_stall=0 extruder: target=215 temp=215.2 pwm=0.441
Stats 2672.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=887069 bytes_read=483321 bytes_retransmit=9 bytes_invalid=0 send_seq=25636 receive_seq=25636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.785 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=237943 sysload=0.16 cputime=67.434 memavail=1629456 print_time=2684.003 buffer_time=2.344 print_stall=0 extruder: target=215 temp=215.1 pwm=0.566
Stats 2673.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=887946 bytes_read=483758 bytes_retransmit=9 bytes_invalid=0 send_seq=25660 receive_seq=25660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=238123 sysload=0.16 cputime=67.499 memavail=1628972 print_time=2684.990 buffer_time=2.329 print_stall=0 extruder: target=215 temp=215.2 pwm=0.491
Stats 2674.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=888517 bytes_read=484138 bytes_retransmit=9 bytes_invalid=0 send_seq=25677 receive_seq=25677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.598 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=238212 sysload=0.16 cputime=67.556 memavail=1629488 print_time=2685.699 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.4 pwm=0.411
Stats 2675.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=889212 bytes_read=484524 bytes_retransmit=9 bytes_invalid=0 send_seq=25699 receive_seq=25699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=238327 sysload=0.15 cputime=67.613 memavail=1629484 print_time=2686.991 buffer_time=2.327 print_stall=0 extruder: target=215 temp=215.2 pwm=0.540
Stats 2676.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=889791 bytes_read=484934 bytes_retransmit=9 bytes_invalid=0 send_seq=25720 receive_seq=25720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=238390 sysload=0.15 cputime=67.672 memavail=1629500 print_time=2687.884 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.2 pwm=0.550
Stats 2677.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=890838 bytes_read=485374 bytes_retransmit=9 bytes_invalid=0 send_seq=25747 receive_seq=25747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.497 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=238564 sysload=0.15 cputime=67.732 memavail=1629736 print_time=2688.707 buffer_time=2.042 print_stall=0 extruder: target=215 temp=215.4 pwm=0.453
Stats 2678.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=891906 bytes_read=485793 bytes_retransmit=9 bytes_invalid=0 send_seq=25774 receive_seq=25774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=238766 sysload=0.15 cputime=67.797 memavail=1629756 print_time=2690.235 buffer_time=2.568 print_stall=0 extruder: target=215 temp=215.5 pwm=0.363
Stats 2679.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=892565 bytes_read=486234 bytes_retransmit=9 bytes_invalid=0 send_seq=25796 receive_seq=25796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=54.5 mcu_temp: temp=39.4 sd_pos=238884 sysload=0.15 cputime=67.860 memavail=1629740 print_time=2691.014 buffer_time=2.346 print_stall=0 extruder: target=215 temp=215.5 pwm=0.493
Stats 2680.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=893174 bytes_read=486611 bytes_retransmit=9 bytes_invalid=0 send_seq=25814 receive_seq=25814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=239004 sysload=0.13 cputime=67.918 memavail=1629752 print_time=2691.793 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.5 pwm=0.440
Stats 2681.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=894005 bytes_read=487013 bytes_retransmit=9 bytes_invalid=0 send_seq=25837 receive_seq=25837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.513 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=239183 sysload=0.13 cputime=67.981 memavail=1629732 print_time=2693.275 buffer_time=2.606 print_stall=0 extruder: target=215 temp=215.6 pwm=0.369
Stats 2682.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=894456 bytes_read=487449 bytes_retransmit=9 bytes_invalid=0 send_seq=25855 receive_seq=25855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=239245 sysload=0.13 cputime=68.043 memavail=1629496 print_time=2693.669 buffer_time=1.999 print_stall=0 extruder: target=215 temp=215.5 pwm=0.514
Stats 2683.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=895799 bytes_read=487891 bytes_retransmit=9 bytes_invalid=0 send_seq=25886 receive_seq=25886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.147 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=239438 sysload=0.13 cputime=68.108 memavail=1629488 print_time=2695.207 buffer_time=2.536 print_stall=0 extruder: target=215 temp=215.5 pwm=0.437
Stats 2684.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=896356 bytes_read=488273 bytes_retransmit=9 bytes_invalid=0 send_seq=25905 receive_seq=25905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.032 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=239528 sysload=0.13 cputime=68.167 memavail=1629496 print_time=2695.914 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.5 pwm=0.492
Stats 2685.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=897000 bytes_read=488694 bytes_retransmit=9 bytes_invalid=0 send_seq=25923 receive_seq=25923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=239611 sysload=0.12 cputime=68.216 memavail=1629488 print_time=2696.933 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.4 pwm=0.493
Stats 2686.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=897632 bytes_read=489076 bytes_retransmit=9 bytes_invalid=0 send_seq=25942 receive_seq=25942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=239724 sysload=0.12 cputime=68.274 memavail=1629184 print_time=2697.946 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.4 pwm=0.486
Stats 2687.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=898297 bytes_read=489478 bytes_retransmit=9 bytes_invalid=0 send_seq=25962 receive_seq=25962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=239842 sysload=0.12 cputime=68.333 memavail=1629176 print_time=2699.005 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.3 pwm=0.574
Stats 2688.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=899403 bytes_read=489954 bytes_retransmit=9 bytes_invalid=0 send_seq=25991 receive_seq=25991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=240317 sysload=0.12 cputime=68.401 memavail=1629428 print_time=2699.730 buffer_time=2.058 print_stall=0 extruder: target=215 temp=215.5 pwm=0.395
Stats 2689.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=900439 bytes_read=490376 bytes_retransmit=9 bytes_invalid=0 send_seq=26018 receive_seq=26018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=241085 sysload=0.12 cputime=68.470 memavail=1629688 print_time=2700.734 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.2 pwm=0.490
Stats 2690.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=901488 bytes_read=490788 bytes_retransmit=9 bytes_invalid=0 send_seq=26043 receive_seq=26043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=241697 sysload=0.11 cputime=68.538 memavail=1630264 print_time=2701.686 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.2 pwm=0.547
Stats 2691.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=902506 bytes_read=491244 bytes_retransmit=9 bytes_invalid=0 send_seq=26068 receive_seq=26068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=54.5 mcu_temp: temp=40.0 sd_pos=242550 sysload=0.11 cputime=68.615 memavail=1629784 print_time=2702.763 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.3 pwm=0.449
Stats 2692.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=903377 bytes_read=491661 bytes_retransmit=9 bytes_invalid=0 send_seq=26091 receive_seq=26091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.003 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=243120 sysload=0.11 cputime=68.685 memavail=1630268 print_time=2703.685 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.2 pwm=0.460
Stats 2693.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=904465 bytes_read=492078 bytes_retransmit=9 bytes_invalid=0 send_seq=26117 receive_seq=26117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=243979 sysload=0.11 cputime=68.758 memavail=1630516 print_time=2704.863 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.2 pwm=0.528
Stats 2694.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=905366 bytes_read=492529 bytes_retransmit=9 bytes_invalid=0 send_seq=26141 receive_seq=26141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=10 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=244601 sysload=0.11 cputime=68.829 memavail=1630512 print_time=2705.836 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.531
Stats 2695.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=906284 bytes_read=492952 bytes_retransmit=9 bytes_invalid=0 send_seq=26166 receive_seq=26166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.415 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=245001 sysload=0.10 cputime=68.893 memavail=1630756 print_time=2706.732 buffer_time=2.055 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 2696.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=907436 bytes_read=493394 bytes_retransmit=9 bytes_invalid=0 send_seq=26194 receive_seq=26194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.492 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=245267 sysload=0.10 cputime=68.957 memavail=1630764 print_time=2707.839 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 2697.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=908338 bytes_read=493855 bytes_retransmit=9 bytes_invalid=0 send_seq=26220 receive_seq=26220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=245411 sysload=0.10 cputime=69.022 memavail=1631076 print_time=2708.828 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.0 pwm=0.523
Stats 2698.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=909364 bytes_read=494277 bytes_retransmit=9 bytes_invalid=0 send_seq=26247 receive_seq=26247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=245554 sysload=0.10 cputime=69.086 memavail=1631020 print_time=2709.948 buffer_time=2.269 print_stall=0 extruder: target=215 temp=214.8 pwm=0.601
Stats 2699.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=910309 bytes_read=494704 bytes_retransmit=9 bytes_invalid=0 send_seq=26272 receive_seq=26272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=245670 sysload=0.10 cputime=69.136 memavail=1630532 print_time=2711.122 buffer_time=2.443 print_stall=0 extruder: target=215 temp=214.8 pwm=0.600
Stats 2700.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=911034 bytes_read=495135 bytes_retransmit=9 bytes_invalid=0 send_seq=26295 receive_seq=26295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=245758 sysload=0.10 cputime=69.198 memavail=1630272 print_time=2711.734 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 2701.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=912101 bytes_read=495562 bytes_retransmit=9 bytes_invalid=0 send_seq=26323 receive_seq=26323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=245903 sysload=0.10 cputime=69.261 memavail=1630524 print_time=2712.983 buffer_time=2.302 print_stall=0 extruder: target=215 temp=214.8 pwm=0.519
Stats 2702.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=913062 bytes_read=496014 bytes_retransmit=9 bytes_invalid=0 send_seq=26350 receive_seq=26350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=246021 sysload=0.10 cputime=69.323 memavail=1630524 print_time=2714.245 buffer_time=2.563 print_stall=0 extruder: target=215 temp=214.9 pwm=0.431
Stats 2703.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=913820 bytes_read=496440 bytes_retransmit=9 bytes_invalid=0 send_seq=26372 receive_seq=26372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.425 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=246108 sysload=0.10 cputime=69.370 memavail=1630280 print_time=2714.874 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.6 pwm=0.587
Stats 2704.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=914882 bytes_read=496867 bytes_retransmit=9 bytes_invalid=0 send_seq=26400 receive_seq=26400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=246254 sysload=0.10 cputime=69.431 memavail=1630280 print_time=2716.113 buffer_time=2.429 print_stall=0 extruder: target=215 temp=214.7 pwm=0.567
Stats 2705.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=915503 bytes_read=497264 bytes_retransmit=9 bytes_invalid=0 send_seq=26419 receive_seq=26419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=246343 sysload=0.09 cputime=69.489 memavail=1630028 print_time=2716.731 buffer_time=2.046 print_stall=0 extruder: target=215 temp=214.6 pwm=0.553
Stats 2706.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=916527 bytes_read=497710 bytes_retransmit=9 bytes_invalid=0 send_seq=26445 receive_seq=26445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=246520 sysload=0.09 cputime=69.556 memavail=1630288 print_time=2717.881 buffer_time=2.195 print_stall=0 extruder: target=215 temp=214.6 pwm=0.543
Stats 2707.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=917371 bytes_read=498117 bytes_retransmit=9 bytes_invalid=0 send_seq=26466 receive_seq=26466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=246635 sysload=0.09 cputime=69.614 memavail=1630280 print_time=2718.888 buffer_time=2.203 print_stall=0 extruder: target=215 temp=214.7 pwm=0.484
Stats 2708.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=918225 bytes_read=498539 bytes_retransmit=9 bytes_invalid=0 send_seq=26490 receive_seq=26490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=246779 sysload=0.09 cputime=69.676 memavail=1630532 print_time=2719.764 buffer_time=2.077 print_stall=0 extruder: target=215 temp=214.7 pwm=0.570
Stats 2709.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=919483 bytes_read=499005 bytes_retransmit=9 bytes_invalid=0 send_seq=26520 receive_seq=26520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=54.9 pwm=0.251 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=247268 sysload=0.09 cputime=69.744 memavail=1630548 print_time=2720.734 buffer_time=2.047 print_stall=0 extruder: target=215 temp=214.9 pwm=0.448
Stats 2710.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=920808 bytes_read=499452 bytes_retransmit=9 bytes_invalid=0 send_seq=26552 receive_seq=26552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.351 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=247912 sysload=0.08 cputime=69.800 memavail=1630800 print_time=2721.892 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 2711.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=921591 bytes_read=499859 bytes_retransmit=9 bytes_invalid=0 send_seq=26573 receive_seq=26573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=248498 sysload=0.08 cputime=69.869 memavail=1630320 print_time=2722.698 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 2712.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=922642 bytes_read=500325 bytes_retransmit=9 bytes_invalid=0 send_seq=26600 receive_seq=26600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.281 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=249113 sysload=0.08 cputime=69.945 memavail=1630312 print_time=2723.731 buffer_time=2.042 print_stall=0 extruder: target=215 temp=215.0 pwm=0.554
Stats 2713.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=923919 bytes_read=500767 bytes_retransmit=9 bytes_invalid=0 send_seq=26631 receive_seq=26631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=249969 sysload=0.08 cputime=70.017 memavail=1629808 print_time=2724.953 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 2714.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=924566 bytes_read=501164 bytes_retransmit=9 bytes_invalid=0 send_seq=26650 receive_seq=26650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=250360 sysload=0.08 cputime=70.068 memavail=1629556 print_time=2725.809 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.2 pwm=0.447
Stats 2715.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=925445 bytes_read=501600 bytes_retransmit=9 bytes_invalid=0 send_seq=26674 receive_seq=26674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=251104 sysload=0.07 cputime=70.121 memavail=1629816 print_time=2726.964 buffer_time=2.272 print_stall=0 extruder: target=215 temp=215.1 pwm=0.566
Stats 2716.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=926673 bytes_read=502027 bytes_retransmit=9 bytes_invalid=0 send_seq=26702 receive_seq=26702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=10 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.471 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=251847 sysload=0.07 cputime=70.191 memavail=1629808 print_time=2728.014 buffer_time=2.321 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 2717.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=927539 bytes_read=502469 bytes_retransmit=9 bytes_invalid=0 send_seq=26727 receive_seq=26727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=251995 sysload=0.07 cputime=70.252 memavail=1629816 print_time=2728.737 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 2718.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=928709 bytes_read=502930 bytes_retransmit=9 bytes_invalid=0 send_seq=26756 receive_seq=26756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=252203 sysload=0.07 cputime=70.317 memavail=1629548 print_time=2730.165 buffer_time=2.471 print_stall=0 extruder: target=215 temp=214.9 pwm=0.574
Stats 2719.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=929367 bytes_read=503322 bytes_retransmit=9 bytes_invalid=0 send_seq=26777 receive_seq=26777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=252295 sysload=0.07 cputime=70.376 memavail=1629576 print_time=2730.697 buffer_time=2.003 print_stall=0 extruder: target=215 temp=214.8 pwm=0.598
Stats 2720.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=930398 bytes_read=503759 bytes_retransmit=9 bytes_invalid=0 send_seq=26804 receive_seq=26804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=252417 sysload=0.07 cputime=70.424 memavail=1630084 print_time=2731.813 buffer_time=2.119 print_stall=0 extruder: target=215 temp=214.7 pwm=0.695
Stats 2721.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=931424 bytes_read=504210 bytes_retransmit=9 bytes_invalid=0 send_seq=26831 receive_seq=26831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.221 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=252567 sysload=0.07 cputime=70.485 memavail=1629836 print_time=2732.982 buffer_time=2.287 print_stall=0 extruder: target=215 temp=214.8 pwm=0.485
Stats 2722.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=932470 bytes_read=504647 bytes_retransmit=9 bytes_invalid=0 send_seq=26858 receive_seq=26858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.510 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=252688 sysload=0.07 cputime=70.547 memavail=1629584 print_time=2734.177 buffer_time=2.482 print_stall=0 extruder: target=215 temp=214.6 pwm=0.587
Stats 2723.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=933141 bytes_read=505054 bytes_retransmit=9 bytes_invalid=0 send_seq=26879 receive_seq=26879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=252748 sysload=0.07 cputime=70.604 memavail=1629592 print_time=2734.775 buffer_time=2.079 print_stall=0 extruder: target=215 temp=214.6 pwm=0.627
Stats 2724.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=934176 bytes_read=505500 bytes_retransmit=9 bytes_invalid=0 send_seq=26905 receive_seq=26905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=252929 sysload=0.07 cputime=70.668 memavail=1629836 print_time=2735.978 buffer_time=2.282 print_stall=0 extruder: target=215 temp=214.5 pwm=0.603
Stats 2725.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=935218 bytes_read=505922 bytes_retransmit=9 bytes_invalid=0 send_seq=26932 receive_seq=26932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=253051 sysload=0.06 cputime=70.729 memavail=1629340 print_time=2737.127 buffer_time=2.430 print_stall=0 extruder: target=215 temp=214.6 pwm=0.591
Stats 2726.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=936188 bytes_read=506359 bytes_retransmit=9 bytes_invalid=0 send_seq=26959 receive_seq=26959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.375 rpi: temp=54.5 mcu_temp: temp=39.4 sd_pos=253202 sysload=0.06 cputime=70.788 memavail=1629312 print_time=2738.264 buffer_time=2.566 print_stall=0 extruder: target=215 temp=214.6 pwm=0.539
Stats 2727.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=936834 bytes_read=506795 bytes_retransmit=9 bytes_invalid=0 send_seq=26980 receive_seq=26980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.264 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=253263 sysload=0.06 cputime=70.846 memavail=1629032 print_time=2738.783 buffer_time=2.084 print_stall=0 extruder: target=215 temp=214.3 pwm=0.710
Stats 2728.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=937820 bytes_read=507212 bytes_retransmit=9 bytes_invalid=0 send_seq=27006 receive_seq=27006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=253414 sysload=0.06 cputime=70.906 memavail=1629292 print_time=2739.802 buffer_time=2.102 print_stall=0 extruder: target=215 temp=214.6 pwm=0.441
Stats 2729.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=938977 bytes_read=507654 bytes_retransmit=9 bytes_invalid=0 send_seq=27034 receive_seq=27034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.445 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=253689 sysload=0.06 cputime=70.970 memavail=1629484 print_time=2741.033 buffer_time=2.333 print_stall=0 extruder: target=215 temp=214.4 pwm=0.553
Stats 2730.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=940101 bytes_read=508110 bytes_retransmit=9 bytes_invalid=0 send_seq=27062 receive_seq=27062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=254217 sysload=0.06 cputime=71.021 memavail=1629540 print_time=2741.785 buffer_time=2.084 print_stall=0 extruder: target=215 temp=214.5 pwm=0.512
Stats 2731.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=941044 bytes_read=508517 bytes_retransmit=9 bytes_invalid=0 send_seq=27086 receive_seq=27086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=254302 sysload=0.06 cputime=71.078 memavail=1629792 print_time=2742.729 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.4 pwm=0.652
Stats 2732.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=941719 bytes_read=508939 bytes_retransmit=9 bytes_invalid=0 send_seq=27107 receive_seq=27107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=254413 sysload=0.06 cputime=71.139 memavail=1629800 print_time=2744.021 buffer_time=2.319 print_stall=0 extruder: target=215 temp=214.5 pwm=0.487
Stats 2733.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=942370 bytes_read=509345 bytes_retransmit=9 bytes_invalid=0 send_seq=27125 receive_seq=27125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.058 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=254530 sysload=0.06 cputime=71.197 memavail=1629772 print_time=2745.254 buffer_time=2.551 print_stall=0 extruder: target=215 temp=214.5 pwm=0.515
Stats 2734.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=942935 bytes_read=509713 bytes_retransmit=9 bytes_invalid=0 send_seq=27143 receive_seq=27143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=254620 sysload=0.06 cputime=71.255 memavail=1630064 print_time=2745.815 buffer_time=2.112 print_stall=0 extruder: target=215 temp=214.7 pwm=0.461
Stats 2735.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=943492 bytes_read=510084 bytes_retransmit=9 bytes_invalid=0 send_seq=27159 receive_seq=27159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=254706 sysload=0.05 cputime=71.314 memavail=1630064 print_time=2746.834 buffer_time=2.129 print_stall=0 extruder: target=215 temp=214.9 pwm=0.354
Stats 2736.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=944110 bytes_read=510478 bytes_retransmit=9 bytes_invalid=0 send_seq=27177 receive_seq=27177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.9 pwm=0.476 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=254791 sysload=0.05 cputime=71.372 memavail=1629812 print_time=2747.759 buffer_time=2.053 print_stall=0 extruder: target=215 temp=214.8 pwm=0.518
Stats 2737.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=945350 bytes_read=510911 bytes_retransmit=9 bytes_invalid=0 send_seq=27205 receive_seq=27205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=54.0 mcu_temp: temp=39.3 sd_pos=255003 sysload=0.05 cputime=71.435 memavail=1629812 print_time=2749.026 buffer_time=2.320 print_stall=0 extruder: target=215 temp=214.8 pwm=0.574
Stats 2738.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=946034 bytes_read=511328 bytes_retransmit=9 bytes_invalid=0 send_seq=27225 receive_seq=27225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=255122 sysload=0.05 cputime=71.493 memavail=1629812 print_time=2749.817 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.8 pwm=0.609
Stats 2739.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=946886 bytes_read=511739 bytes_retransmit=9 bytes_invalid=0 send_seq=27247 receive_seq=27247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.421 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=255302 sysload=0.05 cputime=71.551 memavail=1630008 print_time=2750.805 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 2740.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=947735 bytes_read=512141 bytes_retransmit=9 bytes_invalid=0 send_seq=27270 receive_seq=27270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.048 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=255450 sysload=0.05 cputime=71.597 memavail=1630392 print_time=2751.761 buffer_time=2.052 print_stall=0 extruder: target=215 temp=214.9 pwm=0.579
Stats 2741.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=948753 bytes_read=512583 bytes_retransmit=9 bytes_invalid=0 send_seq=27295 receive_seq=27295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.491 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=255659 sysload=0.05 cputime=71.660 memavail=1630140 print_time=2752.938 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.1 pwm=0.477
Stats 2742.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=949313 bytes_read=512984 bytes_retransmit=9 bytes_invalid=0 send_seq=27312 receive_seq=27312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.441 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=255747 sysload=0.05 cputime=71.720 memavail=1629828 print_time=2753.956 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.1 pwm=0.583
Stats 2743.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=950120 bytes_read=513386 bytes_retransmit=9 bytes_invalid=0 send_seq=27335 receive_seq=27335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.550 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=255867 sysload=0.05 cputime=71.782 memavail=1629576 print_time=2755.477 buffer_time=2.766 print_stall=0 extruder: target=215 temp=215.4 pwm=0.391
Stats 2744.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=950987 bytes_read=513823 bytes_retransmit=9 bytes_invalid=0 send_seq=27359 receive_seq=27359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=255954 sysload=0.05 cputime=71.841 memavail=1629576 print_time=2756.106 buffer_time=2.395 print_stall=0 extruder: target=215 temp=215.3 pwm=0.489
Stats 2745.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=951785 bytes_read=514239 bytes_retransmit=9 bytes_invalid=0 send_seq=27382 receive_seq=27382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=256128 sysload=0.20 cputime=71.899 memavail=1629576 print_time=2757.048 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.6 pwm=0.436
Stats 2746.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=952462 bytes_read=514631 bytes_retransmit=9 bytes_invalid=0 send_seq=27403 receive_seq=27403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=54.0 mcu_temp: temp=39.9 sd_pos=256243 sysload=0.20 cputime=71.957 memavail=1629576 print_time=2757.827 buffer_time=2.115 print_stall=0 extruder: target=215 temp=215.6 pwm=0.434
Stats 2747.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=953475 bytes_read=515083 bytes_retransmit=9 bytes_invalid=0 send_seq=27427 receive_seq=27427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=256481 sysload=0.20 cputime=72.019 memavail=1629576 print_time=2759.385 buffer_time=2.672 print_stall=0 extruder: target=215 temp=215.7 pwm=0.434
Stats 2748.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=954072 bytes_read=515479 bytes_retransmit=9 bytes_invalid=0 send_seq=27446 receive_seq=27446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=256600 sysload=0.20 cputime=72.077 memavail=1630092 print_time=2760.203 buffer_time=2.489 print_stall=0 extruder: target=215 temp=215.5 pwm=0.548
Stats 2749.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=954523 bytes_read=515861 bytes_retransmit=9 bytes_invalid=0 send_seq=27465 receive_seq=27465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=256660 sysload=0.20 cputime=72.133 memavail=1630048 print_time=2760.867 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.6 pwm=0.493
Stats 2750.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=955577 bytes_read=516308 bytes_retransmit=9 bytes_invalid=0 send_seq=27491 receive_seq=27491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=256825 sysload=0.19 cputime=72.179 memavail=1629796 print_time=2761.997 buffer_time=2.282 print_stall=0 extruder: target=215 temp=215.6 pwm=0.441
Stats 2751.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=956228 bytes_read=516704 bytes_retransmit=9 bytes_invalid=0 send_seq=27510 receive_seq=27510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.9 pwm=0.719 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=256915 sysload=0.19 cputime=72.237 memavail=1629796 print_time=2762.799 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.6 pwm=0.441
Stats 2752.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=956980 bytes_read=517116 bytes_retransmit=9 bytes_invalid=0 send_seq=27532 receive_seq=27532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=257034 sysload=0.19 cputime=72.298 memavail=1629560 print_time=2763.860 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.5 pwm=0.509
Stats 2753.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=957641 bytes_read=517528 bytes_retransmit=9 bytes_invalid=0 send_seq=27551 receive_seq=27551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.095 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=257145 sysload=0.19 cputime=72.357 memavail=1629300 print_time=2765.172 buffer_time=2.455 print_stall=0 extruder: target=215 temp=215.4 pwm=0.543
Stats 2754.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=958278 bytes_read=517929 bytes_retransmit=9 bytes_invalid=0 send_seq=27571 receive_seq=27571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.472 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=257260 sysload=0.19 cputime=72.416 memavail=1629056 print_time=2766.203 buffer_time=2.486 print_stall=0 extruder: target=215 temp=215.3 pwm=0.569
Stats 2755.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=959545 bytes_read=518366 bytes_retransmit=9 bytes_invalid=0 send_seq=27601 receive_seq=27601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.474 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=257853 sysload=0.17 cputime=72.480 memavail=1629308 print_time=2767.342 buffer_time=2.625 print_stall=0 extruder: target=215 temp=215.3 pwm=0.538
Stats 2756.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=960145 bytes_read=518804 bytes_retransmit=9 bytes_invalid=0 send_seq=27623 receive_seq=27623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=258091 sysload=0.17 cputime=72.541 memavail=1629312 print_time=2767.895 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.3 pwm=0.540
Stats 2757.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=961211 bytes_read=519255 bytes_retransmit=9 bytes_invalid=0 send_seq=27650 receive_seq=27650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.090 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=258847 sysload=0.17 cputime=72.612 memavail=1629060 print_time=2769.027 buffer_time=2.308 print_stall=0 extruder: target=215 temp=215.1 pwm=0.561
Stats 2758.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=962271 bytes_read=519677 bytes_retransmit=9 bytes_invalid=0 send_seq=27677 receive_seq=27677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=259472 sysload=0.17 cputime=72.683 memavail=1629060 print_time=2770.005 buffer_time=2.286 print_stall=0 extruder: target=215 temp=215.2 pwm=0.532
Stats 2759.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=963103 bytes_read=520114 bytes_retransmit=9 bytes_invalid=0 send_seq=27701 receive_seq=27701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.411 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=260049 sysload=0.17 cputime=72.748 memavail=1629092 print_time=2770.741 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.3 pwm=0.438
Stats 2760.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=964171 bytes_read=520545 bytes_retransmit=9 bytes_invalid=0 send_seq=27727 receive_seq=27727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=260686 sysload=0.16 cputime=72.817 memavail=1628812 print_time=2771.968 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.0 pwm=0.570
Stats 2761.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=965003 bytes_read=520947 bytes_retransmit=9 bytes_invalid=0 send_seq=27750 receive_seq=27750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.487 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=261354 sysload=0.16 cputime=72.886 memavail=1628816 print_time=2772.875 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 2762.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=965921 bytes_read=521399 bytes_retransmit=9 bytes_invalid=0 send_seq=27774 receive_seq=27774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.611 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=261999 sysload=0.16 cputime=72.953 memavail=1629068 print_time=2773.877 buffer_time=2.156 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 2763.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=967239 bytes_read=521855 bytes_retransmit=9 bytes_invalid=0 send_seq=27805 receive_seq=27805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=262379 sysload=0.16 cputime=73.019 memavail=1629320 print_time=2774.969 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 2764.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=968139 bytes_read=522262 bytes_retransmit=9 bytes_invalid=0 send_seq=27829 receive_seq=27829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=262557 sysload=0.16 cputime=73.080 memavail=1629572 print_time=2775.820 buffer_time=2.096 print_stall=0 extruder: target=215 temp=214.8 pwm=0.630
Stats 2765.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=969074 bytes_read=522704 bytes_retransmit=9 bytes_invalid=0 send_seq=27854 receive_seq=27854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=262671 sysload=0.14 cputime=73.142 memavail=1630076 print_time=2776.799 buffer_time=2.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 2766.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=970031 bytes_read=523135 bytes_retransmit=9 bytes_invalid=0 send_seq=27880 receive_seq=27880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=262818 sysload=0.14 cputime=73.203 memavail=1629824 print_time=2777.885 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.8 pwm=0.563
Stats 2767.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=971032 bytes_read=523567 bytes_retransmit=9 bytes_invalid=0 send_seq=27906 receive_seq=27906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=262935 sysload=0.14 cputime=73.264 memavail=1629824 print_time=2779.028 buffer_time=2.303 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 2768.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=972058 bytes_read=524024 bytes_retransmit=9 bytes_invalid=0 send_seq=27934 receive_seq=27934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.030 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=263081 sysload=0.14 cputime=73.328 memavail=1630076 print_time=2780.216 buffer_time=2.490 print_stall=0 extruder: target=215 temp=214.7 pwm=0.589
Stats 2769.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=972718 bytes_read=524440 bytes_retransmit=9 bytes_invalid=0 send_seq=27957 receive_seq=27957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.156 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=263139 sysload=0.14 cputime=73.387 memavail=1629824 print_time=2780.813 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.9 pwm=0.450
Stats 2770.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=973752 bytes_read=524857 bytes_retransmit=9 bytes_invalid=0 send_seq=27983 receive_seq=27983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.382 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=263312 sysload=0.13 cputime=73.447 memavail=1629816 print_time=2782.015 buffer_time=2.288 print_stall=0 extruder: target=215 temp=214.8 pwm=0.530
Stats 2771.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=974833 bytes_read=525319 bytes_retransmit=9 bytes_invalid=0 send_seq=28012 receive_seq=28012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.531 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=263487 sysload=0.13 cputime=73.512 memavail=1630068 print_time=2783.211 buffer_time=2.484 print_stall=0 extruder: target=215 temp=215.0 pwm=0.361
Stats 2772.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=975443 bytes_read=525740 bytes_retransmit=9 bytes_invalid=0 send_seq=28033 receive_seq=28033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=263547 sysload=0.13 cputime=73.571 memavail=1629588 print_time=2783.797 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.7 pwm=0.565
Stats 2773.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=976461 bytes_read=526162 bytes_retransmit=9 bytes_invalid=0 send_seq=28060 receive_seq=28060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=54.0 mcu_temp: temp=39.6 sd_pos=263724 sysload=0.13 cputime=73.633 memavail=1629276 print_time=2784.949 buffer_time=2.220 print_stall=0 extruder: target=215 temp=214.7 pwm=0.522
Stats 2774.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=977432 bytes_read=526614 bytes_retransmit=9 bytes_invalid=0 send_seq=28087 receive_seq=28087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=263867 sysload=0.13 cputime=73.697 memavail=1629532 print_time=2786.021 buffer_time=2.293 print_stall=0 extruder: target=215 temp=214.8 pwm=0.501
Stats 2775.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=978330 bytes_read=527030 bytes_retransmit=9 bytes_invalid=0 send_seq=28110 receive_seq=28110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.450 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=264041 sysload=0.12 cputime=73.758 memavail=1630044 print_time=2786.981 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 2776.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=979192 bytes_read=527419 bytes_retransmit=9 bytes_invalid=0 send_seq=28134 receive_seq=28134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=264184 sysload=0.12 cputime=73.819 memavail=1630296 print_time=2787.752 buffer_time=2.022 print_stall=0 extruder: target=215 temp=214.8 pwm=0.605
Stats 2777.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=980733 bytes_read=527926 bytes_retransmit=9 bytes_invalid=0 send_seq=28169 receive_seq=28169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=265124 sysload=0.12 cputime=73.892 memavail=1630548 print_time=2788.790 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 2778.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=981726 bytes_read=528329 bytes_retransmit=9 bytes_invalid=0 send_seq=28193 receive_seq=28193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=265808 sysload=0.12 cputime=73.960 memavail=1630548 print_time=2790.023 buffer_time=2.292 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 2779.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=983085 bytes_read=528748 bytes_retransmit=9 bytes_invalid=0 send_seq=28223 receive_seq=28223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=266648 sysload=0.12 cputime=74.035 memavail=1630296 print_time=2790.778 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 2780.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=983971 bytes_read=529167 bytes_retransmit=9 bytes_invalid=0 send_seq=28247 receive_seq=28247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=267218 sysload=0.11 cputime=74.106 memavail=1630304 print_time=2791.769 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.1 pwm=0.372
Stats 2781.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=985370 bytes_read=529618 bytes_retransmit=9 bytes_invalid=0 send_seq=28277 receive_seq=28277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=268384 sysload=0.11 cputime=74.183 memavail=1630304 print_time=2792.935 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.2 pwm=0.389
Stats 2782.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000064 bytes_write=986101 bytes_read=530030 bytes_retransmit=9 bytes_invalid=0 send_seq=28299 receive_seq=28299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=268808 sysload=0.11 cputime=74.249 memavail=1630060 print_time=2793.776 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.1 pwm=0.497
Stats 2783.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000064 bytes_write=986999 bytes_read=530467 bytes_retransmit=9 bytes_invalid=0 send_seq=28323 receive_seq=28323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=269297 sysload=0.11 cputime=74.321 memavail=1630060 print_time=2794.937 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.0 pwm=0.569
Stats 2784.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000064 bytes_write=988102 bytes_read=530898 bytes_retransmit=9 bytes_invalid=0 send_seq=28349 receive_seq=28349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=269740 sysload=0.11 cputime=74.385 memavail=1630060 print_time=2795.882 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.9 pwm=0.568
Stats 2785.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000064 bytes_write=988910 bytes_read=531290 bytes_retransmit=9 bytes_invalid=0 send_seq=28370 receive_seq=28370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=269893 sysload=0.18 cputime=74.446 memavail=1629784 print_time=2796.781 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 2786.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000064 bytes_write=989806 bytes_read=531727 bytes_retransmit=9 bytes_invalid=0 send_seq=28394 receive_seq=28394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=270044 sysload=0.18 cputime=74.509 memavail=1630060 print_time=2797.822 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.8 pwm=0.580
Stats 2787.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=990796 bytes_read=532168 bytes_retransmit=9 bytes_invalid=0 send_seq=28419 receive_seq=28419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=270196 sysload=0.18 cputime=74.572 memavail=1630060 print_time=2798.969 buffer_time=2.226 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 2788.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=991826 bytes_read=532580 bytes_retransmit=9 bytes_invalid=0 send_seq=28444 receive_seq=28444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=54.0 mcu_temp: temp=39.7 sd_pos=270348 sysload=0.18 cputime=74.636 memavail=1630320 print_time=2800.181 buffer_time=2.434 print_stall=0 extruder: target=215 temp=214.6 pwm=0.647
Stats 2789.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=992515 bytes_read=532997 bytes_retransmit=9 bytes_invalid=0 send_seq=28464 receive_seq=28464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=270439 sysload=0.18 cputime=74.694 memavail=1630380 print_time=2800.816 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.7 pwm=0.545
Stats 2790.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=993527 bytes_read=533433 bytes_retransmit=9 bytes_invalid=0 send_seq=28491 receive_seq=28491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=270560 sysload=0.17 cputime=74.741 memavail=1629888 print_time=2802.060 buffer_time=2.310 print_stall=0 extruder: target=215 temp=214.3 pwm=0.664
Stats 2791.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=994564 bytes_read=533850 bytes_retransmit=9 bytes_invalid=0 send_seq=28517 receive_seq=28517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.048 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=270712 sysload=0.17 cputime=74.803 memavail=1629636 print_time=2803.320 buffer_time=2.567 print_stall=0 extruder: target=215 temp=214.5 pwm=0.586
Stats 2792.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=995204 bytes_read=534287 bytes_retransmit=9 bytes_invalid=0 send_seq=28538 receive_seq=28538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=270802 sysload=0.17 cputime=74.865 memavail=1630144 print_time=2803.944 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.6 pwm=0.489
Stats 2793.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=996279 bytes_read=534725 bytes_retransmit=9 bytes_invalid=0 send_seq=28566 receive_seq=28566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.456 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=270954 sysload=0.17 cputime=74.928 memavail=1630144 print_time=2805.163 buffer_time=2.404 print_stall=0 extruder: target=215 temp=214.6 pwm=0.489
Stats 2794.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=997240 bytes_read=535122 bytes_retransmit=9 bytes_invalid=0 send_seq=28593 receive_seq=28590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=54.9 pwm=0.569 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=271135 sysload=0.17 cputime=74.992 memavail=1630396 print_time=2806.318 buffer_time=2.555 print_stall=0 extruder: target=215 temp=214.5 pwm=0.544
Stats 2795.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=997883 bytes_read=535542 bytes_retransmit=9 bytes_invalid=0 send_seq=28613 receive_seq=28613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=271197 sysload=0.15 cputime=75.053 memavail=1630648 print_time=2806.856 buffer_time=2.093 print_stall=0 extruder: target=215 temp=214.7 pwm=0.485
Stats 2796.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=998764 bytes_read=535947 bytes_retransmit=9 bytes_invalid=0 send_seq=28636 receive_seq=28636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=271345 sysload=0.15 cputime=75.115 memavail=1630648 print_time=2807.847 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.5 pwm=0.564
Stats 2797.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1000031 bytes_read=536395 bytes_retransmit=9 bytes_invalid=0 send_seq=28666 receive_seq=28666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=54.5 mcu_temp: temp=39.4 sd_pos=271618 sysload=0.15 cputime=75.181 memavail=1630400 print_time=2808.986 buffer_time=2.216 print_stall=0 extruder: target=215 temp=214.6 pwm=0.533
Stats 2798.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1001538 bytes_read=536886 bytes_retransmit=9 bytes_invalid=0 send_seq=28698 receive_seq=28698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=272163 sysload=0.15 cputime=75.250 memavail=1630400 print_time=2809.816 buffer_time=2.042 print_stall=0 extruder: target=215 temp=214.6 pwm=0.563
Stats 2799.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1002599 bytes_read=537298 bytes_retransmit=9 bytes_invalid=0 send_seq=28723 receive_seq=28723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=273057 sysload=0.15 cputime=75.328 memavail=1630164 print_time=2810.911 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.5 pwm=0.563
Stats 2800.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1003587 bytes_read=537705 bytes_retransmit=9 bytes_invalid=0 send_seq=28747 receive_seq=28747 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.147 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=273555 sysload=0.14 cputime=75.394 memavail=1629904 print_time=2811.773 buffer_time=1.997 print_stall=0 extruder: target=215 temp=214.8 pwm=0.493
Stats 2801.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1004665 bytes_read=538176 bytes_retransmit=9 bytes_invalid=0 send_seq=28775 receive_seq=28775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=274515 sysload=0.14 cputime=75.474 memavail=1629900 print_time=2812.945 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.6 pwm=0.594
Stats 2802.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=1005665 bytes_read=538603 bytes_retransmit=9 bytes_invalid=0 send_seq=28800 receive_seq=28800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=275026 sysload=0.14 cputime=75.526 memavail=1629900 print_time=2813.793 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.8 pwm=0.475
Stats 2803.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=1006706 bytes_read=539030 bytes_retransmit=9 bytes_invalid=0 send_seq=28825 receive_seq=28825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=10 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.085 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=275977 sysload=0.14 cputime=75.607 memavail=1629640 print_time=2814.896 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.6 pwm=0.654
Stats 2804.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=1007556 bytes_read=539461 bytes_retransmit=9 bytes_invalid=0 send_seq=28848 receive_seq=28848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=276527 sysload=0.14 cputime=75.660 memavail=1629144 print_time=2816.025 buffer_time=2.238 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 2805.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=1008414 bytes_read=539858 bytes_retransmit=9 bytes_invalid=0 send_seq=28870 receive_seq=28870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=276848 sysload=0.13 cputime=75.723 memavail=1629404 print_time=2816.810 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 2806.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=1009510 bytes_read=540295 bytes_retransmit=9 bytes_invalid=0 send_seq=28897 receive_seq=28897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=277086 sysload=0.13 cputime=75.791 memavail=1629152 print_time=2817.887 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 2807.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1010398 bytes_read=540741 bytes_retransmit=9 bytes_invalid=0 send_seq=28920 receive_seq=28920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=277232 sysload=0.13 cputime=75.855 memavail=1629148 print_time=2818.846 buffer_time=2.048 print_stall=0 extruder: target=215 temp=215.0 pwm=0.563
Stats 2808.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1011292 bytes_read=541148 bytes_retransmit=9 bytes_invalid=0 send_seq=28944 receive_seq=28944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=277354 sysload=0.13 cputime=75.922 memavail=1629160 print_time=2819.904 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.0 pwm=0.584
Stats 2809.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1012303 bytes_read=541575 bytes_retransmit=9 bytes_invalid=0 send_seq=28969 receive_seq=28969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=277473 sysload=0.13 cputime=75.987 memavail=1629148 print_time=2821.038 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.1 pwm=0.533
Stats 2810.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1013316 bytes_read=542021 bytes_retransmit=9 bytes_invalid=0 send_seq=28995 receive_seq=28995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=54.9 pwm=0.573 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=277595 sysload=0.20 cputime=76.037 memavail=1629660 print_time=2822.209 buffer_time=2.398 print_stall=0 extruder: target=215 temp=215.1 pwm=0.548
Stats 2811.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1013997 bytes_read=542413 bytes_retransmit=9 bytes_invalid=0 send_seq=29016 receive_seq=29016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=277684 sysload=0.20 cputime=76.098 memavail=1629332 print_time=2822.819 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.1 pwm=0.580
Stats 2812.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1014982 bytes_read=542875 bytes_retransmit=9 bytes_invalid=0 send_seq=29042 receive_seq=29042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=277805 sysload=0.20 cputime=76.170 memavail=1629352 print_time=2824.004 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.2 pwm=0.480
Stats 2813.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1016065 bytes_read=543321 bytes_retransmit=9 bytes_invalid=0 send_seq=29071 receive_seq=29071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=277956 sysload=0.20 cputime=76.239 memavail=1629572 print_time=2825.199 buffer_time=2.381 print_stall=0 extruder: target=215 temp=215.1 pwm=0.540
Stats 2814.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1017084 bytes_read=543754 bytes_retransmit=9 bytes_invalid=0 send_seq=29098 receive_seq=29098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=55 temp=55.1 pwm=0.243 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=278077 sysload=0.20 cputime=76.306 memavail=1629860 print_time=2826.367 buffer_time=2.548 print_stall=0 extruder: target=215 temp=215.2 pwm=0.470
Stats 2815.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1017644 bytes_read=544166 bytes_retransmit=9 bytes_invalid=0 send_seq=29117 receive_seq=29117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=278139 sysload=0.18 cputime=76.369 memavail=1630108 print_time=2826.932 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.1 pwm=0.557
Stats 2816.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1018686 bytes_read=544607 bytes_retransmit=9 bytes_invalid=0 send_seq=29145 receive_seq=29145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=278290 sysload=0.18 cputime=76.437 memavail=1629864 print_time=2828.016 buffer_time=2.190 print_stall=0 extruder: target=215 temp=215.1 pwm=0.588
Stats 2817.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1019522 bytes_read=545019 bytes_retransmit=9 bytes_invalid=0 send_seq=29167 receive_seq=29167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.452 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=278410 sysload=0.18 cputime=76.504 memavail=1629620 print_time=2828.995 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.0 pwm=0.588
Stats 2818.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1020396 bytes_read=545456 bytes_retransmit=9 bytes_invalid=0 send_seq=29191 receive_seq=29191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=278590 sysload=0.18 cputime=76.570 memavail=1629856 print_time=2829.838 buffer_time=2.007 print_stall=0 extruder: target=215 temp=214.8 pwm=0.652
Stats 2819.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1022216 bytes_read=545947 bytes_retransmit=9 bytes_invalid=0 send_seq=29229 receive_seq=29229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.0 pwm=0.416 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=279177 sysload=0.18 cputime=76.647 memavail=1629608 print_time=2831.513 buffer_time=2.678 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 2820.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1022679 bytes_read=546319 bytes_retransmit=9 bytes_invalid=0 send_seq=29246 receive_seq=29246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=54.9 pwm=0.683 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=279231 sysload=0.17 cputime=76.694 memavail=1629616 print_time=2831.927 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.7 pwm=0.587
Stats 2821.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1023255 bytes_read=546726 bytes_retransmit=9 bytes_invalid=0 send_seq=29264 receive_seq=29264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.1 pwm=0.005 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=279315 sysload=0.17 cputime=76.758 memavail=1629616 print_time=2832.945 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.6 pwm=0.667
Stats 2822.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1023950 bytes_read=547147 bytes_retransmit=9 bytes_invalid=0 send_seq=29285 receive_seq=29285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=55 temp=55.0 pwm=0.438 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=279432 sysload=0.17 cputime=76.824 memavail=1629624 print_time=2834.178 buffer_time=2.337 print_stall=0 extruder: target=215 temp=214.5 pwm=0.645
Stats 2823.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1024615 bytes_read=547534 bytes_retransmit=9 bytes_invalid=0 send_seq=29305 receive_seq=29305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=279551 sysload=0.17 cputime=76.888 memavail=1629104 print_time=2835.132 buffer_time=2.287 print_stall=0 extruder: target=215 temp=214.6 pwm=0.584
Stats 2824.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1025211 bytes_read=547946 bytes_retransmit=9 bytes_invalid=0 send_seq=29324 receive_seq=29324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=55 temp=55.0 pwm=0.508 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=279637 sysload=0.17 cputime=76.953 memavail=1629108 print_time=2836.031 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.6 pwm=0.584
Stats 2825.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1026125 bytes_read=548362 bytes_retransmit=9 bytes_invalid=0 send_seq=29347 receive_seq=29347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=279758 sysload=0.16 cputime=77.020 memavail=1629112 print_time=2837.191 buffer_time=2.341 print_stall=0 extruder: target=215 temp=214.7 pwm=0.526
Stats 2826.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1026946 bytes_read=548764 bytes_retransmit=9 bytes_invalid=0 send_seq=29370 receive_seq=29370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=55 temp=55.1 pwm=0.297 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=279905 sysload=0.16 cputime=77.085 memavail=1629108 print_time=2837.951 buffer_time=2.097 print_stall=0 extruder: target=215 temp=214.9 pwm=0.426
Stats 2827.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1027810 bytes_read=549216 bytes_retransmit=9 bytes_invalid=0 send_seq=29394 receive_seq=29394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.0 pwm=0.640 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=280054 sysload=0.16 cputime=77.135 memavail=1629112 print_time=2838.908 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.8 pwm=0.513
Stats 2828.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1028990 bytes_read=549662 bytes_retransmit=9 bytes_invalid=0 send_seq=29423 receive_seq=29423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=280322 sysload=0.16 cputime=77.203 memavail=1628544 print_time=2840.520 buffer_time=2.660 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 2829.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1029836 bytes_read=550069 bytes_retransmit=9 bytes_invalid=0 send_seq=29447 receive_seq=29447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=54.9 pwm=0.828 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=280502 sysload=0.16 cputime=77.269 memavail=1628780 print_time=2841.508 buffer_time=2.646 print_stall=0 extruder: target=215 temp=214.9 pwm=0.593
Stats 2830.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1030366 bytes_read=550486 bytes_retransmit=9 bytes_invalid=0 send_seq=29467 receive_seq=29467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=280561 sysload=0.14 cputime=77.318 memavail=1629056 print_time=2841.862 buffer_time=1.998 print_stall=0 extruder: target=215 temp=215.2 pwm=0.436
Stats 2831.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1030949 bytes_read=550877 bytes_retransmit=9 bytes_invalid=0 send_seq=29485 receive_seq=29485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=280649 sysload=0.14 cputime=77.377 memavail=1629076 print_time=2842.881 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.3 pwm=0.419
Stats 2832.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=1031725 bytes_read=551294 bytes_retransmit=9 bytes_invalid=0 send_seq=29508 receive_seq=29508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.1 pwm=0.089 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=280769 sysload=0.14 cputime=77.442 memavail=1629060 print_time=2844.401 buffer_time=2.533 print_stall=0 extruder: target=215 temp=215.3 pwm=0.469
Stats 2833.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=1032558 bytes_read=551740 bytes_retransmit=9 bytes_invalid=0 send_seq=29531 receive_seq=29531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.269 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=280856 sysload=0.14 cputime=77.502 memavail=1629060 print_time=2845.031 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.5 pwm=0.413
Stats 2835.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=1033407 bytes_read=552152 bytes_retransmit=9 bytes_invalid=0 send_seq=29556 receive_seq=29556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.050 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=281030 sysload=0.14 cputime=77.565 memavail=1629324 print_time=2845.973 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.6 pwm=0.367
Stats 2836.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=1034279 bytes_read=552569 bytes_retransmit=9 bytes_invalid=0 send_seq=29582 receive_seq=29582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=281203 sysload=0.13 cputime=77.628 memavail=1629328 print_time=2846.905 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.6 pwm=0.443
Stats 2837.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000040 bytes_write=1035206 bytes_read=553030 bytes_retransmit=9 bytes_invalid=0 send_seq=29608 receive_seq=29608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=281383 sysload=0.13 cputime=77.694 memavail=1629580 print_time=2848.310 buffer_time=2.430 print_stall=0 extruder: target=215 temp=215.7 pwm=0.474
Stats 2838.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=1035874 bytes_read=553437 bytes_retransmit=9 bytes_invalid=0 send_seq=29629 receive_seq=29629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=281502 sysload=0.13 cputime=77.740 memavail=1629520 print_time=2849.128 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.7 pwm=0.444
Stats 2839.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=1036471 bytes_read=553844 bytes_retransmit=9 bytes_invalid=0 send_seq=29650 receive_seq=29650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=281624 sysload=0.13 cputime=77.799 memavail=1629268 print_time=2850.187 buffer_time=2.304 print_stall=0 extruder: target=215 temp=215.9 pwm=0.352
Stats 2840.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=1037436 bytes_read=554290 bytes_retransmit=9 bytes_invalid=0 send_seq=29676 receive_seq=29676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=281727 sysload=0.13 cputime=77.865 memavail=1629548 print_time=2850.922 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.6 pwm=0.562
Stats 2841.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=1038334 bytes_read=554697 bytes_retransmit=9 bytes_invalid=0 send_seq=29700 receive_seq=29700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=281877 sysload=0.12 cputime=77.915 memavail=1629296 print_time=2852.121 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.8 pwm=0.390
Stats 2842.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000045 bytes_write=1038934 bytes_read=555099 bytes_retransmit=9 bytes_invalid=0 send_seq=29720 receive_seq=29720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=281963 sysload=0.12 cputime=77.978 memavail=1629052 print_time=2853.096 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.6 pwm=0.498
Stats 2843.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=1039593 bytes_read=555540 bytes_retransmit=9 bytes_invalid=0 send_seq=29742 receive_seq=29742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=282047 sysload=0.12 cputime=78.026 memavail=1629296 print_time=2854.096 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.5 pwm=0.413
Stats 2844.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=1040265 bytes_read=555932 bytes_retransmit=9 bytes_invalid=0 send_seq=29763 receive_seq=29763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.481 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=282162 sysload=0.12 cputime=78.088 memavail=1629608 print_time=2855.128 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.4 pwm=0.493
Stats 2845.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=1041617 bytes_read=556404 bytes_retransmit=9 bytes_invalid=0 send_seq=29797 receive_seq=29797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=282725 sysload=0.12 cputime=78.159 memavail=1629612 print_time=2856.288 buffer_time=2.401 print_stall=0 extruder: target=215 temp=215.5 pwm=0.469
Stats 2846.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=1042455 bytes_read=556840 bytes_retransmit=9 bytes_invalid=0 send_seq=29821 receive_seq=29821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=283201 sysload=0.19 cputime=78.230 memavail=1629612 print_time=2857.095 buffer_time=2.207 print_stall=0 extruder: target=215 temp=215.2 pwm=0.610
Stats 2847.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=1043416 bytes_read=557252 bytes_retransmit=9 bytes_invalid=0 send_seq=29846 receive_seq=29846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.436 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=283923 sysload=0.19 cputime=78.301 memavail=1629864 print_time=2857.912 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.2 pwm=0.531
Stats 2848.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1044601 bytes_read=557719 bytes_retransmit=9 bytes_invalid=0 send_seq=29876 receive_seq=29876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=284669 sysload=0.19 cputime=78.379 memavail=1629864 print_time=2859.112 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.2 pwm=0.513
Stats 2849.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1045638 bytes_read=558170 bytes_retransmit=9 bytes_invalid=0 send_seq=29903 receive_seq=29903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.106 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=285414 sysload=0.19 cputime=78.454 memavail=1629356 print_time=2859.990 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.3 pwm=0.458
Stats 2850.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1046636 bytes_read=558592 bytes_retransmit=9 bytes_invalid=0 send_seq=29930 receive_seq=29930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.034 rpi: temp=54.5 mcu_temp: temp=38.9 sd_pos=285987 sysload=0.19 cputime=78.520 memavail=1629368 print_time=2861.039 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.1 pwm=0.571
Stats 2851.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1047398 bytes_read=559009 bytes_retransmit=9 bytes_invalid=0 send_seq=29953 receive_seq=29953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=286465 sysload=0.18 cputime=78.574 memavail=1629104 print_time=2861.985 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.0 pwm=0.611
Stats 2852.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1048465 bytes_read=559455 bytes_retransmit=9 bytes_invalid=0 send_seq=29979 receive_seq=29979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.228 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=287502 sysload=0.18 cputime=78.652 memavail=1629072 print_time=2863.056 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.1 pwm=0.531
Stats 2853.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1049920 bytes_read=559922 bytes_retransmit=9 bytes_invalid=0 send_seq=30012 receive_seq=30012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=287731 sysload=0.18 cputime=78.719 memavail=1629124 print_time=2864.058 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 2854.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1050766 bytes_read=560337 bytes_retransmit=9 bytes_invalid=0 send_seq=30036 receive_seq=30036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.508 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=287904 sysload=0.18 cputime=78.783 memavail=1629384 print_time=2864.930 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.1 pwm=0.544
Stats 2855.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1051735 bytes_read=560771 bytes_retransmit=9 bytes_invalid=0 send_seq=30062 receive_seq=30062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=288079 sysload=0.18 cputime=78.848 memavail=1629636 print_time=2865.943 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.2 pwm=0.390
Stats 2856.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1052755 bytes_read=561188 bytes_retransmit=9 bytes_invalid=0 send_seq=30090 receive_seq=30090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=288254 sysload=0.16 cputime=78.911 memavail=1629432 print_time=2867.049 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 2857.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1053765 bytes_read=561610 bytes_retransmit=9 bytes_invalid=0 send_seq=30116 receive_seq=30116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.587 rpi: temp=54.0 mcu_temp: temp=39.5 sd_pos=288372 sysload=0.16 cputime=78.975 memavail=1629432 print_time=2868.195 buffer_time=2.300 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 2858.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1054817 bytes_read=562076 bytes_retransmit=9 bytes_invalid=0 send_seq=30143 receive_seq=30143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=54.5 mcu_temp: temp=39.8 sd_pos=288548 sysload=0.16 cputime=79.039 memavail=1629684 print_time=2869.390 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.2 pwm=0.322
Stats 2859.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1055430 bytes_read=562468 bytes_retransmit=9 bytes_invalid=0 send_seq=30164 receive_seq=30164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.338 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=288605 sysload=0.16 cputime=79.101 memavail=1629692 print_time=2869.981 buffer_time=2.085 print_stall=0 extruder: target=215 temp=214.9 pwm=0.586
Stats 2860.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1056485 bytes_read=562905 bytes_retransmit=9 bytes_invalid=0 send_seq=30191 receive_seq=30191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=288722 sysload=0.16 cputime=79.154 memavail=1629692 print_time=2871.176 buffer_time=2.279 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 2861.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1057542 bytes_read=563356 bytes_retransmit=9 bytes_invalid=0 send_seq=30218 receive_seq=30218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=288898 sysload=0.15 cputime=79.205 memavail=1629440 print_time=2872.364 buffer_time=2.466 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 2862.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1058179 bytes_read=563743 bytes_retransmit=9 bytes_invalid=0 send_seq=30238 receive_seq=30238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.428 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=288958 sysload=0.15 cputime=79.264 memavail=1629448 print_time=2872.942 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.9 pwm=0.590
Stats 2863.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1059189 bytes_read=564190 bytes_retransmit=9 bytes_invalid=0 send_seq=30264 receive_seq=30264 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=289103 sysload=0.15 cputime=79.331 memavail=1629692 print_time=2874.060 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 2864.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1060123 bytes_read=564631 bytes_retransmit=9 bytes_invalid=0 send_seq=30289 receive_seq=30289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.512 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=289219 sysload=0.15 cputime=79.394 memavail=1629632 print_time=2875.093 buffer_time=2.194 print_stall=0 extruder: target=215 temp=214.9 pwm=0.544
Stats 2865.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1061058 bytes_read=565048 bytes_retransmit=9 bytes_invalid=0 send_seq=30315 receive_seq=30315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=289366 sysload=0.15 cputime=79.457 memavail=1629628 print_time=2876.020 buffer_time=2.119 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 2866.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1062589 bytes_read=565530 bytes_retransmit=9 bytes_invalid=0 send_seq=30351 receive_seq=30351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=289923 sysload=0.14 cputime=79.515 memavail=1629700 print_time=2877.309 buffer_time=2.407 print_stall=0 extruder: target=215 temp=214.7 pwm=0.648
Stats 2867.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1063707 bytes_read=565986 bytes_retransmit=9 bytes_invalid=0 send_seq=30379 receive_seq=30379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=290622 sysload=0.14 cputime=79.589 memavail=1629700 print_time=2878.226 buffer_time=2.324 print_stall=0 extruder: target=215 temp=214.8 pwm=0.559
Stats 2868.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1064604 bytes_read=566403 bytes_retransmit=9 bytes_invalid=0 send_seq=30402 receive_seq=30402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=291263 sysload=0.14 cputime=79.658 memavail=1629952 print_time=2879.068 buffer_time=2.165 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 2869.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1065818 bytes_read=566850 bytes_retransmit=9 bytes_invalid=0 send_seq=30431 receive_seq=30431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=292088 sysload=0.14 cputime=79.735 memavail=1629704 print_time=2880.156 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 2870.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1066657 bytes_read=567281 bytes_retransmit=9 bytes_invalid=0 send_seq=30454 receive_seq=30454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=292702 sysload=0.14 cputime=79.791 memavail=1629716 print_time=2880.949 buffer_time=2.045 print_stall=0 extruder: target=215 temp=214.8 pwm=0.574
Stats 2871.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1067675 bytes_read=567703 bytes_retransmit=9 bytes_invalid=0 send_seq=30481 receive_seq=30481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.465 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=293256 sysload=0.12 cputime=79.861 memavail=1629716 print_time=2881.926 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 2872.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1068658 bytes_read=568140 bytes_retransmit=9 bytes_invalid=0 send_seq=30508 receive_seq=30508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=294112 sysload=0.12 cputime=79.937 memavail=1629464 print_time=2883.058 buffer_time=2.152 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 2873.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1069521 bytes_read=568612 bytes_retransmit=9 bytes_invalid=0 send_seq=30534 receive_seq=30534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996385 heater_bed: target=55 temp=54.8 pwm=0.891 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=294729 sysload=0.12 cputime=80.007 memavail=1629468 print_time=2883.932 buffer_time=2.025 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 2874.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1070809 bytes_read=569049 bytes_retransmit=9 bytes_invalid=0 send_seq=30564 receive_seq=30564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=54.5 mcu_temp: temp=39.4 sd_pos=295113 sysload=0.12 cputime=80.076 memavail=1629464 print_time=2884.940 buffer_time=2.032 print_stall=0 extruder: target=215 temp=214.8 pwm=0.605
Stats 2875.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1071958 bytes_read=569511 bytes_retransmit=9 bytes_invalid=0 send_seq=30593 receive_seq=30593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=295353 sysload=0.12 cputime=80.146 memavail=1629496 print_time=2886.332 buffer_time=2.424 print_stall=0 extruder: target=215 temp=214.8 pwm=0.581
Stats 2876.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1072889 bytes_read=569942 bytes_retransmit=9 bytes_invalid=0 send_seq=30619 receive_seq=30619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=295532 sysload=0.11 cputime=80.213 memavail=1629780 print_time=2887.453 buffer_time=2.543 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 2877.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1073506 bytes_read=570329 bytes_retransmit=9 bytes_invalid=0 send_seq=30639 receive_seq=30639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=54.5 mcu_temp: temp=39.1 sd_pos=295594 sysload=0.11 cputime=80.272 memavail=1629984 print_time=2888.026 buffer_time=2.116 print_stall=0 extruder: target=215 temp=214.7 pwm=0.571
Stats 2878.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1074511 bytes_read=570791 bytes_retransmit=9 bytes_invalid=0 send_seq=30665 receive_seq=30665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=295716 sysload=0.11 cputime=80.334 memavail=1629984 print_time=2889.238 buffer_time=2.327 print_stall=0 extruder: target=215 temp=214.6 pwm=0.633
Stats 2879.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1075531 bytes_read=571227 bytes_retransmit=9 bytes_invalid=0 send_seq=30692 receive_seq=30692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=295836 sysload=0.11 cputime=80.398 memavail=1629480 print_time=2890.491 buffer_time=2.580 print_stall=0 extruder: target=215 temp=214.6 pwm=0.627
Stats 2880.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1076153 bytes_read=571614 bytes_retransmit=9 bytes_invalid=0 send_seq=30712 receive_seq=30712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=295925 sysload=0.11 cputime=80.458 memavail=1629480 print_time=2891.121 buffer_time=2.209 print_stall=0 extruder: target=215 temp=214.6 pwm=0.614
Stats 2881.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1077220 bytes_read=572071 bytes_retransmit=9 bytes_invalid=0 send_seq=30740 receive_seq=30740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=296046 sysload=0.10 cputime=80.522 memavail=1629484 print_time=2892.380 buffer_time=2.468 print_stall=0 extruder: target=215 temp=214.6 pwm=0.536
Stats 2882.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1077848 bytes_read=572477 bytes_retransmit=9 bytes_invalid=0 send_seq=30761 receive_seq=30761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=296108 sysload=0.10 cputime=80.582 memavail=1629744 print_time=2893.007 buffer_time=2.094 print_stall=0 extruder: target=215 temp=214.4 pwm=0.702
Stats 2883.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1078859 bytes_read=572909 bytes_retransmit=9 bytes_invalid=0 send_seq=30787 receive_seq=30787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=296228 sysload=0.10 cputime=80.629 memavail=1629996 print_time=2894.226 buffer_time=2.313 print_stall=0 extruder: target=215 temp=214.6 pwm=0.482
Stats 2884.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1079852 bytes_read=573351 bytes_retransmit=9 bytes_invalid=0 send_seq=30812 receive_seq=30812 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.560 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=296377 sysload=0.10 cputime=80.693 memavail=1629996 print_time=2895.386 buffer_time=2.473 print_stall=0 extruder: target=215 temp=214.5 pwm=0.582
Stats 2885.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1080450 bytes_read=573747 bytes_retransmit=9 bytes_invalid=0 send_seq=30831 receive_seq=30831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=296464 sysload=0.10 cputime=80.753 memavail=1629744 print_time=2895.925 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.5 pwm=0.555
Stats 2886.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1081337 bytes_read=574154 bytes_retransmit=9 bytes_invalid=0 send_seq=30855 receive_seq=30855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.454 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=296642 sysload=0.10 cputime=80.815 memavail=1629996 print_time=2896.933 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.5 pwm=0.537
Stats 2887.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1082455 bytes_read=574596 bytes_retransmit=9 bytes_invalid=0 send_seq=30880 receive_seq=30880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=296857 sysload=0.10 cputime=80.877 memavail=1630248 print_time=2898.050 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.6 pwm=0.537
Stats 2888.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1084281 bytes_read=575107 bytes_retransmit=9 bytes_invalid=0 send_seq=30919 receive_seq=30919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=297323 sysload=0.10 cputime=80.944 memavail=1629996 print_time=2899.443 buffer_time=2.525 print_stall=0 extruder: target=215 temp=214.7 pwm=0.391
Stats 2889.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1084862 bytes_read=575489 bytes_retransmit=9 bytes_invalid=0 send_seq=30938 receive_seq=30938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=297404 sysload=0.10 cputime=81.004 memavail=1630256 print_time=2900.211 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.6 pwm=0.559
Stats 2890.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1085491 bytes_read=575906 bytes_retransmit=9 bytes_invalid=0 send_seq=30958 receive_seq=30958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=297490 sysload=0.10 cputime=81.067 memavail=1630004 print_time=2901.186 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.7 pwm=0.507
Stats 2891.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1086056 bytes_read=576297 bytes_retransmit=9 bytes_invalid=0 send_seq=30976 receive_seq=30976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.488 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=297578 sysload=0.09 cputime=81.115 memavail=1630252 print_time=2902.109 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.0 pwm=0.407
Stats 2892.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1086654 bytes_read=576679 bytes_retransmit=9 bytes_invalid=0 send_seq=30995 receive_seq=30995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=297697 sysload=0.09 cputime=81.180 memavail=1630252 print_time=2903.062 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 2893.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1087228 bytes_read=577096 bytes_retransmit=9 bytes_invalid=0 send_seq=31012 receive_seq=31012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=297783 sysload=0.09 cputime=81.227 memavail=1629748 print_time=2903.962 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.1 pwm=0.488
Stats 2894.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1088132 bytes_read=577517 bytes_retransmit=9 bytes_invalid=0 send_seq=31036 receive_seq=31036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=38 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=297904 sysload=0.09 cputime=81.288 memavail=1629756 print_time=2905.122 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.2 pwm=0.518
Stats 2895.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1089404 bytes_read=577949 bytes_retransmit=9 bytes_invalid=0 send_seq=31065 receive_seq=31065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.755 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=298170 sysload=0.09 cputime=81.352 memavail=1630268 print_time=2906.673 buffer_time=2.743 print_stall=0 extruder: target=215 temp=215.3 pwm=0.417
Stats 2896.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1090259 bytes_read=578396 bytes_retransmit=9 bytes_invalid=0 send_seq=31091 receive_seq=31091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.476 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=298350 sysload=0.08 cputime=81.416 memavail=1630504 print_time=2907.660 buffer_time=2.728 print_stall=0 extruder: target=215 temp=215.2 pwm=0.542
Stats 2897.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1091036 bytes_read=578822 bytes_retransmit=9 bytes_invalid=0 send_seq=31116 receive_seq=31116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=298468 sysload=0.08 cputime=81.478 memavail=1630000 print_time=2908.451 buffer_time=2.516 print_stall=0 extruder: target=215 temp=215.2 pwm=0.501
Stats 2898.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1091845 bytes_read=579234 bytes_retransmit=9 bytes_invalid=0 send_seq=31138 receive_seq=31138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=54.0 mcu_temp: temp=39.3 sd_pos=298648 sysload=0.08 cputime=81.539 memavail=1630196 print_time=2909.438 buffer_time=2.503 print_stall=0 extruder: target=215 temp=215.3 pwm=0.501
Stats 2899.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1092449 bytes_read=579651 bytes_retransmit=9 bytes_invalid=0 send_seq=31158 receive_seq=31158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=298737 sysload=0.08 cputime=81.599 memavail=1629952 print_time=2910.147 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.3 pwm=0.474
Stats 2900.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1093087 bytes_read=580047 bytes_retransmit=9 bytes_invalid=0 send_seq=31177 receive_seq=31177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.507 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=298823 sysload=0.08 cputime=81.660 memavail=1629700 print_time=2911.084 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.3 pwm=0.445
Stats 2901.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1093764 bytes_read=580429 bytes_retransmit=9 bytes_invalid=0 send_seq=31197 receive_seq=31196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=298915 sysload=0.07 cputime=81.722 memavail=1629392 print_time=2912.332 buffer_time=2.392 print_stall=0 extruder: target=215 temp=215.2 pwm=0.580
Stats 2902.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1094601 bytes_read=580876 bytes_retransmit=9 bytes_invalid=0 send_seq=31222 receive_seq=31222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.558 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=299002 sysload=0.07 cputime=81.785 memavail=1629144 print_time=2912.962 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.2 pwm=0.563
Stats 2903.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1095787 bytes_read=581332 bytes_retransmit=9 bytes_invalid=0 send_seq=31250 receive_seq=31250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=26 freq=71996418 heater_bed: target=55 temp=54.9 pwm=0.375 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=299291 sysload=0.07 cputime=81.851 memavail=1629152 print_time=2914.683 buffer_time=2.739 print_stall=0 extruder: target=215 temp=215.6 pwm=0.371
Stats 2904.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1096465 bytes_read=581714 bytes_retransmit=9 bytes_invalid=0 send_seq=31269 receive_seq=31269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=54.9 pwm=0.328 rpi: temp=56.0 mcu_temp: temp=39.0 sd_pos=299409 sysload=0.07 cputime=81.898 memavail=1629388 print_time=2915.462 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.7 pwm=0.393
Stats 2905.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1097122 bytes_read=582141 bytes_retransmit=9 bytes_invalid=0 send_seq=31291 receive_seq=31291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=56.5 mcu_temp: temp=39.4 sd_pos=299529 sysload=0.07 cputime=81.958 memavail=1628892 print_time=2916.241 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.6 pwm=0.477
Stats 2906.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1097826 bytes_read=582552 bytes_retransmit=9 bytes_invalid=0 send_seq=31313 receive_seq=31313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=299648 sysload=0.07 cputime=82.021 memavail=1629148 print_time=2917.058 buffer_time=2.111 print_stall=0 extruder: target=215 temp=215.6 pwm=0.486
Stats 2907.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1098401 bytes_read=582929 bytes_retransmit=9 bytes_invalid=0 send_seq=31331 receive_seq=31331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=299770 sysload=0.07 cputime=82.082 memavail=1629408 print_time=2918.117 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.6 pwm=0.432
Stats 2908.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1099701 bytes_read=583416 bytes_retransmit=9 bytes_invalid=0 send_seq=31362 receive_seq=31362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=299963 sysload=0.07 cputime=82.149 memavail=1629604 print_time=2919.654 buffer_time=2.705 print_stall=0 extruder: target=215 temp=215.5 pwm=0.541
Stats 2909.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1100189 bytes_read=583812 bytes_retransmit=9 bytes_invalid=0 send_seq=31381 receive_seq=31381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=300023 sysload=0.07 cputime=82.195 memavail=1629860 print_time=2920.051 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.3 pwm=0.608
Stats 2910.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1100863 bytes_read=584189 bytes_retransmit=9 bytes_invalid=0 send_seq=31400 receive_seq=31399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.065 rpi: temp=54.0 mcu_temp: temp=39.9 sd_pos=300109 sysload=0.07 cputime=82.257 memavail=1629356 print_time=2921.026 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.3 pwm=0.584
Stats 2911.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1101406 bytes_read=584596 bytes_retransmit=9 bytes_invalid=0 send_seq=31417 receive_seq=31417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=300193 sysload=0.06 cputime=82.303 memavail=1630108 print_time=2922.027 buffer_time=2.073 print_stall=0 extruder: target=215 temp=215.5 pwm=0.466
Stats 2912.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1102048 bytes_read=584992 bytes_retransmit=9 bytes_invalid=0 send_seq=31437 receive_seq=31436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=54.9 pwm=0.656 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=300308 sysload=0.06 cputime=82.362 memavail=1630352 print_time=2923.058 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.5 pwm=0.499
Stats 2913.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1103271 bytes_read=585448 bytes_retransmit=9 bytes_invalid=0 send_seq=31467 receive_seq=31467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.032 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=300860 sysload=0.06 cputime=82.409 memavail=1630112 print_time=2924.229 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.3 pwm=0.555
Stats 2914.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1104205 bytes_read=585872 bytes_retransmit=9 bytes_invalid=0 send_seq=31492 receive_seq=31491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.421 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=301415 sysload=0.06 cputime=82.475 memavail=1630164 print_time=2925.042 buffer_time=2.086 print_stall=0 extruder: target=215 temp=215.3 pwm=0.484
Stats 2915.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1105646 bytes_read=586332 bytes_retransmit=9 bytes_invalid=0 send_seq=31525 receive_seq=31525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=302435 sysload=0.06 cputime=82.550 memavail=1630164 print_time=2926.296 buffer_time=2.339 print_stall=0 extruder: target=215 temp=215.3 pwm=0.527
Stats 2916.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1106424 bytes_read=586719 bytes_retransmit=9 bytes_invalid=0 send_seq=31547 receive_seq=31547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=302941 sysload=0.06 cputime=82.618 memavail=1630432 print_time=2927.093 buffer_time=2.132 print_stall=0 extruder: target=215 temp=215.2 pwm=0.529
Stats 2917.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1107657 bytes_read=587169 bytes_retransmit=9 bytes_invalid=0 send_seq=31575 receive_seq=31575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.247 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=303933 sysload=0.06 cputime=82.693 memavail=1630180 print_time=2928.279 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.1 pwm=0.597
Stats 2918.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1108853 bytes_read=587620 bytes_retransmit=9 bytes_invalid=0 send_seq=31602 receive_seq=31602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=10 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=304770 sysload=0.06 cputime=82.747 memavail=1630200 print_time=2929.300 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.1 pwm=0.547
Stats 2919.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1109579 bytes_read=588007 bytes_retransmit=9 bytes_invalid=0 send_seq=31622 receive_seq=31622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=54.5 mcu_temp: temp=39.0 sd_pos=305207 sysload=0.06 cputime=82.810 memavail=1630192 print_time=2930.243 buffer_time=2.279 print_stall=0 extruder: target=215 temp=215.0 pwm=0.562
Stats 2920.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1110283 bytes_read=588419 bytes_retransmit=9 bytes_invalid=0 send_seq=31641 receive_seq=31641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=305733 sysload=0.06 cputime=82.881 memavail=1629940 print_time=2931.106 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.0 pwm=0.562
Stats 2921.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1111674 bytes_read=588875 bytes_retransmit=9 bytes_invalid=0 send_seq=31672 receive_seq=31672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=306030 sysload=0.05 cputime=82.933 memavail=1629688 print_time=2932.063 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.554
Stats 2922.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1112787 bytes_read=589307 bytes_retransmit=9 bytes_invalid=0 send_seq=31701 receive_seq=31701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=306202 sysload=0.05 cputime=83.000 memavail=1629976 print_time=2933.435 buffer_time=2.465 print_stall=0 extruder: target=215 temp=214.9 pwm=0.594
Stats 2923.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1113749 bytes_read=589783 bytes_retransmit=9 bytes_invalid=0 send_seq=31727 receive_seq=31727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=54.9 pwm=0.573 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=306319 sysload=0.05 cputime=83.068 memavail=1630192 print_time=2934.505 buffer_time=2.531 print_stall=0 extruder: target=215 temp=214.8 pwm=0.542
Stats 2924.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1114324 bytes_read=590160 bytes_retransmit=9 bytes_invalid=0 send_seq=31745 receive_seq=31745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=306378 sysload=0.05 cputime=83.127 memavail=1630468 print_time=2935.076 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.8 pwm=0.542
Stats 2925.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1115324 bytes_read=590572 bytes_retransmit=9 bytes_invalid=0 send_seq=31770 receive_seq=31770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=306495 sysload=0.05 cputime=83.188 memavail=1630464 print_time=2936.239 buffer_time=2.263 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 2926.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1116328 bytes_read=591033 bytes_retransmit=9 bytes_invalid=0 send_seq=31796 receive_seq=31796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.264 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=306612 sysload=0.05 cputime=83.254 memavail=1630456 print_time=2937.439 buffer_time=2.462 print_stall=0 extruder: target=215 temp=214.8 pwm=0.579
Stats 2927.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1117002 bytes_read=591420 bytes_retransmit=9 bytes_invalid=0 send_seq=31816 receive_seq=31816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.636 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=306669 sysload=0.05 cputime=83.308 memavail=1630456 print_time=2938.041 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.9 pwm=0.452
Stats 2928.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1118013 bytes_read=591872 bytes_retransmit=9 bytes_invalid=0 send_seq=31843 receive_seq=31843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=306816 sysload=0.05 cputime=83.372 memavail=1630740 print_time=2939.238 buffer_time=2.255 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 2929.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1119009 bytes_read=592318 bytes_retransmit=9 bytes_invalid=0 send_seq=31869 receive_seq=31869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.681 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=306963 sysload=0.05 cputime=83.436 memavail=1630708 print_time=2940.426 buffer_time=2.443 print_stall=0 extruder: target=215 temp=214.8 pwm=0.602
Stats 2930.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1119641 bytes_read=592700 bytes_retransmit=9 bytes_invalid=0 send_seq=31888 receive_seq=31888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=54.9 pwm=0.635 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=307023 sysload=0.05 cputime=83.495 memavail=1630740 print_time=2941.005 buffer_time=2.021 print_stall=0 extruder: target=215 temp=214.8 pwm=0.538
Stats 2931.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1120877 bytes_read=593157 bytes_retransmit=9 bytes_invalid=0 send_seq=31919 receive_seq=31919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=307170 sysload=0.04 cputime=83.555 memavail=1630712 print_time=2942.122 buffer_time=2.132 print_stall=0 extruder: target=215 temp=214.7 pwm=0.595
Stats 2932.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1121874 bytes_read=593614 bytes_retransmit=9 bytes_invalid=0 send_seq=31945 receive_seq=31945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=54.8 pwm=0.726 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=307287 sysload=0.04 cputime=83.617 memavail=1630976 print_time=2943.156 buffer_time=2.165 print_stall=0 extruder: target=215 temp=214.7 pwm=0.564
Stats 2933.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000072 bytes_write=1122752 bytes_read=594026 bytes_retransmit=9 bytes_invalid=0 send_seq=31968 receive_seq=31967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=307433 sysload=0.04 cputime=83.679 memavail=1630712 print_time=2944.082 buffer_time=2.091 print_stall=0 extruder: target=215 temp=214.7 pwm=0.564
Stats 2934.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000072 bytes_write=1124230 bytes_read=594498 bytes_retransmit=9 bytes_invalid=0 send_seq=32001 receive_seq=32001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=307990 sysload=0.04 cputime=83.747 memavail=1630468 print_time=2945.372 buffer_time=2.381 print_stall=0 extruder: target=215 temp=214.8 pwm=0.484
Stats 2935.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000072 bytes_write=1125233 bytes_read=594939 bytes_retransmit=9 bytes_invalid=0 send_seq=32026 receive_seq=32026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=308656 sysload=0.04 cputime=83.820 memavail=1630468 print_time=2946.235 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.7 pwm=0.577
Stats 2936.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000072 bytes_write=1126059 bytes_read=595331 bytes_retransmit=9 bytes_invalid=0 send_seq=32047 receive_seq=32047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=309356 sysload=0.04 cputime=83.891 memavail=1630484 print_time=2947.052 buffer_time=2.061 print_stall=0 extruder: target=215 temp=214.8 pwm=0.521
Stats 2937.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000026 mcu_task_stddev=0.000072 bytes_write=1127284 bytes_read=595778 bytes_retransmit=9 bytes_invalid=0 send_seq=32076 receive_seq=32076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=310179 sysload=0.04 cputime=83.964 memavail=1630472 print_time=2948.243 buffer_time=2.251 print_stall=0 extruder: target=215 temp=214.9 pwm=0.442
Stats 2938.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1128245 bytes_read=596229 bytes_retransmit=9 bytes_invalid=0 send_seq=32100 receive_seq=32100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=310909 sysload=0.04 cputime=84.035 memavail=1630512 print_time=2949.096 buffer_time=2.103 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 2939.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1129223 bytes_read=596636 bytes_retransmit=9 bytes_invalid=0 send_seq=32124 receive_seq=32124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=311547 sysload=0.04 cputime=84.104 memavail=1630728 print_time=2950.180 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 2940.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1130060 bytes_read=597028 bytes_retransmit=9 bytes_invalid=0 send_seq=32145 receive_seq=32142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=312155 sysload=0.04 cputime=84.174 memavail=1630484 print_time=2951.281 buffer_time=2.281 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 2941.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1130905 bytes_read=597469 bytes_retransmit=9 bytes_invalid=0 send_seq=32167 receive_seq=32167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=10 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=56.5 mcu_temp: temp=39.2 sd_pos=313017 sysload=0.04 cputime=84.231 memavail=1630228 print_time=2952.038 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 2942.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1132294 bytes_read=597911 bytes_retransmit=9 bytes_invalid=0 send_seq=32198 receive_seq=32198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=313430 sysload=0.04 cputime=84.296 memavail=1630452 print_time=2953.285 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 2943.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1133120 bytes_read=598343 bytes_retransmit=9 bytes_invalid=0 send_seq=32221 receive_seq=32221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=313551 sysload=0.04 cputime=84.357 memavail=1630236 print_time=2954.163 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 2944.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1134055 bytes_read=598784 bytes_retransmit=9 bytes_invalid=0 send_seq=32246 receive_seq=32246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=54.5 mcu_temp: temp=38.9 sd_pos=313701 sysload=0.04 cputime=84.420 memavail=1629992 print_time=2955.172 buffer_time=2.170 print_stall=0 extruder: target=215 temp=214.7 pwm=0.600
Stats 2945.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1135076 bytes_read=599201 bytes_retransmit=9 bytes_invalid=0 send_seq=32272 receive_seq=32272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=54.9 pwm=0.319 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=313822 sysload=0.04 cputime=84.484 memavail=1629996 print_time=2956.258 buffer_time=2.256 print_stall=0 extruder: target=215 temp=214.9 pwm=0.405
Stats 2946.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1136043 bytes_read=599628 bytes_retransmit=9 bytes_invalid=0 send_seq=32297 receive_seq=32297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.034 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=313939 sysload=0.03 cputime=84.545 memavail=1630244 print_time=2957.398 buffer_time=2.396 print_stall=0 extruder: target=215 temp=214.7 pwm=0.577
Stats 2947.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1137058 bytes_read=600079 bytes_retransmit=9 bytes_invalid=0 send_seq=32324 receive_seq=32324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=314090 sysload=0.03 cputime=84.609 memavail=1630248 print_time=2958.586 buffer_time=2.581 print_stall=0 extruder: target=215 temp=214.6 pwm=0.585
Stats 2948.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1137674 bytes_read=600481 bytes_retransmit=9 bytes_invalid=0 send_seq=32344 receive_seq=32344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=314152 sysload=0.03 cputime=84.667 memavail=1629928 print_time=2959.175 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.6 pwm=0.578
Stats 2949.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1138702 bytes_read=600918 bytes_retransmit=9 bytes_invalid=0 send_seq=32368 receive_seq=32368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=54.9 pwm=0.520 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=314272 sysload=0.03 cputime=84.730 memavail=1630192 print_time=2960.370 buffer_time=2.361 print_stall=0 extruder: target=215 temp=214.5 pwm=0.638
Stats 2950.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1139694 bytes_read=601344 bytes_retransmit=9 bytes_invalid=0 send_seq=32393 receive_seq=32393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=314423 sysload=0.03 cputime=84.792 memavail=1629932 print_time=2961.558 buffer_time=2.549 print_stall=0 extruder: target=215 temp=214.6 pwm=0.582
Stats 2951.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1140363 bytes_read=601736 bytes_retransmit=9 bytes_invalid=0 send_seq=32414 receive_seq=32414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=314483 sysload=0.03 cputime=84.848 memavail=1629068 print_time=2962.135 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.6 pwm=0.511
Stats 2952.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1141377 bytes_read=602173 bytes_retransmit=9 bytes_invalid=0 send_seq=32439 receive_seq=32438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=54.9 pwm=0.608 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=314635 sysload=0.03 cputime=84.911 memavail=1628744 print_time=2963.269 buffer_time=2.256 print_stall=0 extruder: target=215 temp=214.5 pwm=0.587
Stats 2953.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1142293 bytes_read=602624 bytes_retransmit=9 bytes_invalid=0 send_seq=32465 receive_seq=32465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=54.9 pwm=0.260 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=314757 sysload=0.03 cputime=84.975 memavail=1629012 print_time=2964.285 buffer_time=2.271 print_stall=0 extruder: target=215 temp=214.5 pwm=0.591
Stats 2954.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1143245 bytes_read=603036 bytes_retransmit=9 bytes_invalid=0 send_seq=32490 receive_seq=32490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=314908 sysload=0.03 cputime=85.035 memavail=1628508 print_time=2965.210 buffer_time=2.196 print_stall=0 extruder: target=215 temp=214.5 pwm=0.600
Stats 2955.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1145039 bytes_read=603538 bytes_retransmit=9 bytes_invalid=0 send_seq=32528 receive_seq=32527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=315482 sysload=0.03 cputime=85.106 memavail=1628712 print_time=2966.599 buffer_time=2.583 print_stall=0 extruder: target=215 temp=214.6 pwm=0.514
Stats 2956.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1145756 bytes_read=603949 bytes_retransmit=9 bytes_invalid=0 send_seq=32549 receive_seq=32549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=315946 sysload=0.03 cputime=85.172 memavail=1629148 print_time=2967.038 buffer_time=2.021 print_stall=0 extruder: target=215 temp=214.7 pwm=0.511
Stats 2957.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1146775 bytes_read=604356 bytes_retransmit=9 bytes_invalid=0 send_seq=32573 receive_seq=32573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.220 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=316785 sysload=0.03 cputime=85.244 memavail=1629400 print_time=2968.161 buffer_time=2.143 print_stall=0 extruder: target=215 temp=214.7 pwm=0.511
Stats 2958.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1147891 bytes_read=604828 bytes_retransmit=9 bytes_invalid=0 send_seq=32601 receive_seq=32601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=317615 sysload=0.03 cputime=85.321 memavail=1629404 print_time=2969.023 buffer_time=2.004 print_stall=0 extruder: target=215 temp=214.6 pwm=0.604
Stats 2959.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1148893 bytes_read=605264 bytes_retransmit=9 bytes_invalid=0 send_seq=32628 receive_seq=32628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=318491 sysload=0.03 cputime=85.397 memavail=1628900 print_time=2970.223 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.8 pwm=0.566
Stats 2960.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1150031 bytes_read=605686 bytes_retransmit=9 bytes_invalid=0 send_seq=32655 receive_seq=32655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=10 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=319546 sysload=0.03 cputime=85.474 memavail=1629092 print_time=2971.161 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.8 pwm=0.566
Stats 2961.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1150846 bytes_read=606108 bytes_retransmit=9 bytes_invalid=0 send_seq=32677 receive_seq=32676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=319996 sysload=0.03 cputime=85.542 memavail=1629716 print_time=2972.090 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 2962.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1151630 bytes_read=606524 bytes_retransmit=9 bytes_invalid=0 send_seq=32699 receive_seq=32699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=320560 sysload=0.03 cputime=85.613 memavail=1629748 print_time=2973.192 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.0 pwm=0.514
Stats 2963.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1152833 bytes_read=606966 bytes_retransmit=9 bytes_invalid=0 send_seq=32727 receive_seq=32727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=54.9 pwm=0.362 rpi: temp=54.5 mcu_temp: temp=39.4 sd_pos=320937 sysload=0.03 cputime=85.680 memavail=1629476 print_time=2974.227 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.498
Stats 2964.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1153697 bytes_read=607393 bytes_retransmit=9 bytes_invalid=0 send_seq=32749 receive_seq=32749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=321086 sysload=0.03 cputime=85.743 memavail=1629776 print_time=2975.108 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.0 pwm=0.555
Stats 2965.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1154595 bytes_read=607809 bytes_retransmit=9 bytes_invalid=0 send_seq=32772 receive_seq=32772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=321238 sysload=0.03 cputime=85.791 memavail=1630036 print_time=2976.135 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.2 pwm=0.488
Stats 2966.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1155546 bytes_read=608216 bytes_retransmit=9 bytes_invalid=0 send_seq=32796 receive_seq=32796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=72 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.0 mcu_temp: temp=39.0 sd_pos=321421 sysload=0.02 cputime=85.854 memavail=1630060 print_time=2977.284 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.2 pwm=0.458
Stats 2967.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1156617 bytes_read=608668 bytes_retransmit=9 bytes_invalid=0 send_seq=32824 receive_seq=32823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=66 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=321601 sysload=0.02 cputime=85.918 memavail=1630036 print_time=2978.514 buffer_time=2.486 print_stall=0 extruder: target=215 temp=215.2 pwm=0.518
Stats 2968.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1157325 bytes_read=609104 bytes_retransmit=9 bytes_invalid=0 send_seq=32847 receive_seq=32847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.071 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=321690 sysload=0.02 cputime=85.965 memavail=1630036 print_time=2979.135 buffer_time=2.104 print_stall=0 extruder: target=215 temp=215.1 pwm=0.559
Stats 2969.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1158355 bytes_read=609516 bytes_retransmit=9 bytes_invalid=0 send_seq=32873 receive_seq=32872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=321812 sysload=0.02 cputime=86.028 memavail=1630536 print_time=2980.387 buffer_time=2.356 print_stall=0 extruder: target=215 temp=215.2 pwm=0.527
Stats 2970.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1159359 bytes_read=609973 bytes_retransmit=9 bytes_invalid=0 send_seq=32900 receive_seq=32900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=321963 sysload=0.02 cputime=86.079 memavail=1630280 print_time=2981.661 buffer_time=2.629 print_stall=0 extruder: target=215 temp=215.2 pwm=0.506
Stats 2971.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1159998 bytes_read=610374 bytes_retransmit=9 bytes_invalid=0 send_seq=32920 receive_seq=32920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.016 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=322055 sysload=0.02 cputime=86.140 memavail=1630364 print_time=2982.279 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.2 pwm=0.564
Stats 2972.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1161081 bytes_read=610786 bytes_retransmit=9 bytes_invalid=0 send_seq=32946 receive_seq=32945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=322175 sysload=0.02 cputime=86.206 memavail=1630044 print_time=2983.478 buffer_time=2.443 print_stall=0 extruder: target=215 temp=215.1 pwm=0.582
Stats 2973.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1161669 bytes_read=611216 bytes_retransmit=9 bytes_invalid=0 send_seq=32966 receive_seq=32966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=39.2 sd_pos=322264 sysload=0.02 cputime=86.252 memavail=1630356 print_time=2984.081 buffer_time=2.046 print_stall=0 extruder: target=215 temp=215.0 pwm=0.582
Stats 2974.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1162606 bytes_read=611631 bytes_retransmit=9 bytes_invalid=0 send_seq=32991 receive_seq=32991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=322386 sysload=0.02 cputime=86.311 memavail=1630356 print_time=2985.171 buffer_time=2.134 print_stall=0 extruder: target=215 temp=214.9 pwm=0.602
Stats 2975.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1163531 bytes_read=612023 bytes_retransmit=9 bytes_invalid=0 send_seq=33015 receive_seq=33014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.649 rpi: temp=55.5 mcu_temp: temp=38.9 sd_pos=322571 sysload=0.02 cputime=86.373 memavail=1630608 print_time=2986.178 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 2976.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1164926 bytes_read=612493 bytes_retransmit=9 bytes_invalid=0 send_seq=33047 receive_seq=33047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=322862 sysload=0.02 cputime=86.443 memavail=1630608 print_time=2987.489 buffer_time=2.443 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 2977.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1166518 bytes_read=612972 bytes_retransmit=9 bytes_invalid=0 send_seq=33083 receive_seq=33083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.8 pwm=0.799 rpi: temp=54.5 mcu_temp: temp=39.3 sd_pos=323290 sysload=0.02 cputime=86.494 memavail=1630608 print_time=2988.664 buffer_time=2.617 print_stall=0 extruder: target=215 temp=214.7 pwm=0.630
Stats 2978.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1166975 bytes_read=613359 bytes_retransmit=9 bytes_invalid=0 send_seq=33100 receive_seq=33100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.131 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=323344 sysload=0.02 cputime=86.537 memavail=1630108 print_time=2989.078 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 2979.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1167560 bytes_read=613776 bytes_retransmit=9 bytes_invalid=0 send_seq=33120 receive_seq=33120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.2 sd_pos=323428 sysload=0.02 cputime=86.601 memavail=1629864 print_time=2990.097 buffer_time=2.049 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 2980.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1168219 bytes_read=614177 bytes_retransmit=9 bytes_invalid=0 send_seq=33140 receive_seq=33140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.148 rpi: temp=56.0 mcu_temp: temp=39.3 sd_pos=323545 sysload=0.02 cputime=86.664 memavail=1629860 print_time=2991.330 buffer_time=2.281 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 2981.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1168878 bytes_read=614559 bytes_retransmit=9 bytes_invalid=0 send_seq=33159 receive_seq=33159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=56.0 mcu_temp: temp=39.1 sd_pos=323664 sysload=0.02 cputime=86.713 memavail=1630416 print_time=2992.283 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.8 pwm=0.535
Stats 2982.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1169547 bytes_read=614981 bytes_retransmit=9 bytes_invalid=0 send_seq=33181 receive_seq=33180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=323750 sysload=0.02 cputime=86.778 memavail=1630408 print_time=2993.183 buffer_time=2.132 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 2983.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1170506 bytes_read=615427 bytes_retransmit=9 bytes_invalid=0 send_seq=33207 receive_seq=33206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=323871 sysload=0.02 cputime=86.844 memavail=1630432 print_time=2994.343 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.1 pwm=0.411
Stats 2984.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1171265 bytes_read=615829 bytes_retransmit=9 bytes_invalid=0 send_seq=33229 receive_seq=33229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.413 rpi: temp=55.5 mcu_temp: temp=38.8 sd_pos=324018 sysload=0.02 cputime=86.907 memavail=1630424 print_time=2995.103 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 2985.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1172139 bytes_read=616271 bytes_retransmit=9 bytes_invalid=0 send_seq=33254 receive_seq=33254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.379 rpi: temp=55.5 mcu_temp: temp=39.0 sd_pos=324167 sysload=0.02 cputime=86.969 memavail=1630420 print_time=2996.059 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.2 pwm=0.461
Stats 2986.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1173303 bytes_read=616712 bytes_retransmit=9 bytes_invalid=0 send_seq=33282 receive_seq=33282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=324435 sysload=0.02 cputime=87.038 memavail=1630472 print_time=2997.672 buffer_time=2.610 print_stall=0 extruder: target=215 temp=215.4 pwm=0.411
Stats 2987.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1174223 bytes_read=617129 bytes_retransmit=9 bytes_invalid=0 send_seq=33308 receive_seq=33308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=324615 sysload=0.02 cputime=87.088 memavail=1630220 print_time=2998.659 buffer_time=2.594 print_stall=0 extruder: target=215 temp=215.4 pwm=0.481
Stats 2988.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1174857 bytes_read=617561 bytes_retransmit=9 bytes_invalid=0 send_seq=33328 receive_seq=33328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=324704 sysload=0.02 cputime=87.132 memavail=1629984 print_time=2999.368 buffer_time=2.302 print_stall=0 extruder: target=215 temp=215.5 pwm=0.465
Stats 2989.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1175480 bytes_read=617962 bytes_retransmit=9 bytes_invalid=0 send_seq=33348 receive_seq=33348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.517 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=324790 sysload=0.02 cputime=87.195 memavail=1629920 print_time=3000.305 buffer_time=2.233 print_stall=0 extruder: target=215 temp=215.5 pwm=0.460
Stats 2990.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1176126 bytes_read=618354 bytes_retransmit=9 bytes_invalid=0 send_seq=33369 receive_seq=33369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=324882 sysload=0.02 cputime=87.240 memavail=1630168 print_time=3001.553 buffer_time=2.480 print_stall=0 extruder: target=215 temp=215.5 pwm=0.521
Stats 2991.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1177001 bytes_read=618816 bytes_retransmit=9 bytes_invalid=0 send_seq=33393 receive_seq=33393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=324969 sysload=0.01 cputime=87.287 memavail=1630664 print_time=3002.183 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.8 pwm=0.287
Stats 2992.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1177823 bytes_read=619218 bytes_retransmit=9 bytes_invalid=0 send_seq=33416 receive_seq=33416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.042 rpi: temp=55.5 mcu_temp: temp=39.1 sd_pos=325143 sysload=0.01 cputime=87.346 memavail=1630680 print_time=3003.124 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.6 pwm=0.446
Stats 2993.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1178917 bytes_read=619670 bytes_retransmit=9 bytes_invalid=0 send_seq=33443 receive_seq=33443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=325376 sysload=0.01 cputime=87.407 memavail=1630680 print_time=3004.683 buffer_time=2.601 print_stall=0 extruder: target=215 temp=215.5 pwm=0.583
Stats 2994.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1179536 bytes_read=620076 bytes_retransmit=9 bytes_invalid=0 send_seq=33462 receive_seq=33461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=325496 sysload=0.01 cputime=87.469 memavail=1630428 print_time=3005.461 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.6 pwm=0.434
Stats 2995.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1180184 bytes_read=620468 bytes_retransmit=9 bytes_invalid=0 send_seq=33482 receive_seq=33482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.8 pwm=0.586 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=325615 sysload=0.01 cputime=87.516 memavail=1629940 print_time=3006.279 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.5 pwm=0.525
Stats 2996.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1180864 bytes_read=620875 bytes_retransmit=9 bytes_invalid=0 send_seq=33503 receive_seq=33503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=325737 sysload=0.01 cputime=87.577 memavail=1629936 print_time=3007.338 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.6 pwm=0.483
Stats 2997.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1182252 bytes_read=621356 bytes_retransmit=9 bytes_invalid=0 send_seq=33536 receive_seq=33536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.491 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=325930 sysload=0.01 cputime=87.643 memavail=1630188 print_time=3008.875 buffer_time=2.782 print_stall=0 extruder: target=215 temp=215.6 pwm=0.434
Stats 2998.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1182639 bytes_read=621733 bytes_retransmit=9 bytes_invalid=0 send_seq=33551 receive_seq=33551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=325990 sysload=0.01 cputime=87.683 memavail=1629892 print_time=3009.272 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.6 pwm=0.434
Stats 2999.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1183261 bytes_read=622130 bytes_retransmit=9 bytes_invalid=0 send_seq=33570 receive_seq=33570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=326076 sysload=0.01 cputime=87.739 memavail=1629876 print_time=3010.247 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.5 pwm=0.542
Stats 3000.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1183893 bytes_read=622551 bytes_retransmit=9 bytes_invalid=0 send_seq=33591 receive_seq=33591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=326160 sysload=0.01 cputime=87.797 memavail=1630112 print_time=3011.248 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.6 pwm=0.460
Stats 3001.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1184604 bytes_read=622948 bytes_retransmit=9 bytes_invalid=0 send_seq=33613 receive_seq=33613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=56.0 mcu_temp: temp=39.2 sd_pos=326275 sysload=0.01 cputime=87.853 memavail=1630096 print_time=3012.279 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.4 pwm=0.500
Stats 3002.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1185694 bytes_read=623380 bytes_retransmit=9 bytes_invalid=0 send_seq=33640 receive_seq=33639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=326736 sysload=0.01 cputime=87.913 memavail=1629828 print_time=3013.348 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.7 pwm=0.335
Stats 3003.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=1186858 bytes_read=623856 bytes_retransmit=9 bytes_invalid=0 send_seq=33668 receive_seq=33668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.681 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=327481 sysload=0.01 cputime=87.966 memavail=1629324 print_time=3014.191 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.5 pwm=0.426
Stats 3004.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=1187811 bytes_read=624258 bytes_retransmit=9 bytes_invalid=0 send_seq=33692 receive_seq=33691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.068 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=328267 sysload=0.01 cputime=88.037 memavail=1629324 print_time=3015.306 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.5 pwm=0.485
Stats 3005.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=1188935 bytes_read=624700 bytes_retransmit=9 bytes_invalid=0 send_seq=33720 receive_seq=33719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.633 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=329037 sysload=0.01 cputime=88.091 memavail=1629080 print_time=3016.150 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.4 pwm=0.524
Stats 3006.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=1189954 bytes_read=625141 bytes_retransmit=9 bytes_invalid=0 send_seq=33745 receive_seq=33744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.8 sd_pos=329890 sysload=0.01 cputime=88.162 memavail=1629072 print_time=3017.340 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.5 pwm=0.356
Stats 3007.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=1190955 bytes_read=625553 bytes_retransmit=9 bytes_invalid=0 send_seq=33770 receive_seq=33769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=330625 sysload=0.01 cputime=88.228 memavail=1629096 print_time=3018.227 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.2 pwm=0.562
Stats 3008.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1191893 bytes_read=625990 bytes_retransmit=9 bytes_invalid=0 send_seq=33793 receive_seq=33793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=331364 sysload=0.01 cputime=88.297 memavail=1628820 print_time=3019.327 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.2 pwm=0.469
Stats 3009.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1192547 bytes_read=626396 bytes_retransmit=9 bytes_invalid=0 send_seq=33811 receive_seq=33811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=331874 sysload=0.01 cputime=88.360 memavail=1628828 print_time=3020.200 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.2 pwm=0.505
Stats 3010.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1194053 bytes_read=626848 bytes_retransmit=9 bytes_invalid=0 send_seq=33844 receive_seq=33844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.401 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=332148 sysload=0.01 cputime=88.417 memavail=1629076 print_time=3021.432 buffer_time=2.323 print_stall=0 extruder: target=215 temp=215.2 pwm=0.501
Stats 3011.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1194960 bytes_read=627275 bytes_retransmit=9 bytes_invalid=0 send_seq=33867 receive_seq=33866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=332264 sysload=0.01 cputime=88.475 memavail=1629332 print_time=3022.366 buffer_time=2.255 print_stall=0 extruder: target=215 temp=215.1 pwm=0.505
Stats 3012.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1195941 bytes_read=627711 bytes_retransmit=9 bytes_invalid=0 send_seq=33894 receive_seq=33893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.408 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=332412 sysload=0.01 cputime=88.535 memavail=1629332 print_time=3023.423 buffer_time=2.310 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 3013.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1196921 bytes_read=628148 bytes_retransmit=9 bytes_invalid=0 send_seq=33920 receive_seq=33920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=55.5 mcu_temp: temp=39.4 sd_pos=332560 sysload=0.01 cputime=88.594 memavail=1629096 print_time=3024.568 buffer_time=2.453 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 3014.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1197598 bytes_read=628570 bytes_retransmit=9 bytes_invalid=0 send_seq=33941 receive_seq=33941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=332620 sysload=0.01 cputime=88.652 memavail=1629084 print_time=3025.156 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 3015.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1198578 bytes_read=628996 bytes_retransmit=9 bytes_invalid=0 send_seq=33966 receive_seq=33966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.609 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=332768 sysload=0.01 cputime=88.696 memavail=1628860 print_time=3026.361 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 3016.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1199689 bytes_read=629408 bytes_retransmit=9 bytes_invalid=0 send_seq=33992 receive_seq=33991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=332885 sysload=0.01 cputime=88.754 memavail=1629120 print_time=3027.573 buffer_time=2.453 print_stall=0 extruder: target=215 temp=214.7 pwm=0.611
Stats 3017.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1200338 bytes_read=629825 bytes_retransmit=9 bytes_invalid=0 send_seq=34012 receive_seq=34011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=332943 sysload=0.01 cputime=88.811 memavail=1629140 print_time=3028.174 buffer_time=2.053 print_stall=0 extruder: target=215 temp=214.9 pwm=0.449
Stats 3018.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1201344 bytes_read=630271 bytes_retransmit=9 bytes_invalid=0 send_seq=34038 receive_seq=34037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=333089 sysload=0.01 cputime=88.873 memavail=1629444 print_time=3029.367 buffer_time=2.244 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 3019.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1202335 bytes_read=630698 bytes_retransmit=9 bytes_invalid=0 send_seq=34065 receive_seq=34065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=333206 sysload=0.01 cputime=88.922 memavail=1629448 print_time=3030.519 buffer_time=2.396 print_stall=0 extruder: target=215 temp=214.7 pwm=0.665
Stats 3020.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1203338 bytes_read=631145 bytes_retransmit=9 bytes_invalid=0 send_seq=34091 receive_seq=34091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.423 rpi: temp=55.0 mcu_temp: temp=39.3 sd_pos=333324 sysload=0.01 cputime=88.973 memavail=1629188 print_time=3031.618 buffer_time=2.492 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 3021.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1203927 bytes_read=631551 bytes_retransmit=9 bytes_invalid=0 send_seq=34112 receive_seq=34112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=333384 sysload=0.01 cputime=89.014 memavail=1628956 print_time=3032.133 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.332
Stats 3022.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1205098 bytes_read=631983 bytes_retransmit=9 bytes_invalid=0 send_seq=34141 receive_seq=34141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=333586 sysload=0.01 cputime=89.074 memavail=1629204 print_time=3033.486 buffer_time=2.358 print_stall=0 extruder: target=215 temp=214.9 pwm=0.437
Stats 3023.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1206357 bytes_read=632455 bytes_retransmit=9 bytes_invalid=0 send_seq=34170 receive_seq=34169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.095 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=334073 sysload=0.01 cputime=89.121 memavail=1629164 print_time=3034.459 buffer_time=2.330 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 3024.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1207448 bytes_read=632881 bytes_retransmit=9 bytes_invalid=0 send_seq=34195 receive_seq=34194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=334620 sysload=0.01 cputime=89.184 memavail=1628904 print_time=3035.269 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 3025.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1208392 bytes_read=633288 bytes_retransmit=9 bytes_invalid=0 send_seq=34219 receive_seq=34218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.060 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=335363 sysload=0.01 cputime=89.250 memavail=1629160 print_time=3036.149 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 3026.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1209598 bytes_read=633745 bytes_retransmit=9 bytes_invalid=0 send_seq=34247 receive_seq=34246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=336181 sysload=0.01 cputime=89.327 memavail=1629652 print_time=3037.271 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 3027.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1210531 bytes_read=634176 bytes_retransmit=9 bytes_invalid=0 send_seq=34272 receive_seq=34272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=336978 sysload=0.01 cputime=89.376 memavail=1629408 print_time=3038.211 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 3028.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1211613 bytes_read=634613 bytes_retransmit=9 bytes_invalid=0 send_seq=34299 receive_seq=34299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=337631 sysload=0.01 cputime=89.444 memavail=1629176 print_time=3039.254 buffer_time=2.115 print_stall=0 extruder: target=215 temp=215.0 pwm=0.536
Stats 3029.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1212405 bytes_read=635040 bytes_retransmit=9 bytes_invalid=0 send_seq=34321 receive_seq=34321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=338183 sysload=0.01 cputime=89.507 memavail=1629152 print_time=3040.412 buffer_time=2.272 print_stall=0 extruder: target=215 temp=215.0 pwm=0.577
Stats 3030.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1213303 bytes_read=635461 bytes_retransmit=9 bytes_invalid=0 send_seq=34346 receive_seq=34345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=10 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=339144 sysload=0.01 cputime=89.573 memavail=1628900 print_time=3041.170 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 3031.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1214686 bytes_read=635903 bytes_retransmit=9 bytes_invalid=0 send_seq=34376 receive_seq=34376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=339585 sysload=0.01 cputime=89.635 memavail=1629156 print_time=3042.407 buffer_time=2.266 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 3032.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1215508 bytes_read=636328 bytes_retransmit=9 bytes_invalid=0 send_seq=34398 receive_seq=34398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.0 mcu_temp: temp=39.2 sd_pos=339739 sysload=0.01 cputime=89.690 memavail=1629156 print_time=3043.273 buffer_time=2.129 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 3033.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1216454 bytes_read=636752 bytes_retransmit=9 bytes_invalid=0 send_seq=34422 receive_seq=34422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=339859 sysload=0.01 cputime=89.743 memavail=1629188 print_time=3044.264 buffer_time=2.120 print_stall=0 extruder: target=215 temp=214.7 pwm=0.581
Stats 3034.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1217478 bytes_read=637159 bytes_retransmit=9 bytes_invalid=0 send_seq=34449 receive_seq=34448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=54.9 pwm=0.556 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=339979 sysload=0.01 cputime=89.798 memavail=1629412 print_time=3045.345 buffer_time=2.195 print_stall=0 extruder: target=215 temp=214.6 pwm=0.636
Stats 3035.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1218541 bytes_read=637614 bytes_retransmit=9 bytes_invalid=0 send_seq=34478 receive_seq=34478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=54.9 pwm=0.583 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=340099 sysload=0.01 cputime=89.840 memavail=1629420 print_time=3046.472 buffer_time=2.322 print_stall=0 extruder: target=215 temp=214.7 pwm=0.537
Stats 3036.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1219506 bytes_read=638027 bytes_retransmit=9 bytes_invalid=0 send_seq=34502 receive_seq=34502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=340249 sysload=0.00 cputime=89.898 memavail=1629428 print_time=3047.657 buffer_time=2.505 print_stall=0 extruder: target=215 temp=214.5 pwm=0.647
Stats 3037.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1220163 bytes_read=638424 bytes_retransmit=9 bytes_invalid=0 send_seq=34524 receive_seq=34524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=340309 sysload=0.00 cputime=89.950 memavail=1629672 print_time=3048.247 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.7 pwm=0.464
Stats 3038.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1221204 bytes_read=638891 bytes_retransmit=9 bytes_invalid=0 send_seq=34551 receive_seq=34551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=55.0 mcu_temp: temp=39.1 sd_pos=340427 sysload=0.00 cputime=90.003 memavail=1629664 print_time=3049.443 buffer_time=2.289 print_stall=0 extruder: target=215 temp=214.5 pwm=0.601
Stats 3039.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1222332 bytes_read=639337 bytes_retransmit=9 bytes_invalid=0 send_seq=34581 receive_seq=34580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=340579 sysload=0.00 cputime=90.057 memavail=1629160 print_time=3050.631 buffer_time=2.477 print_stall=0 extruder: target=215 temp=214.4 pwm=0.594
Stats 3040.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1222974 bytes_read=639729 bytes_retransmit=9 bytes_invalid=0 send_seq=34601 receive_seq=34601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=340640 sysload=0.00 cputime=90.110 memavail=1628404 print_time=3051.209 buffer_time=2.050 print_stall=0 extruder: target=215 temp=214.4 pwm=0.626
Stats 3041.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1223954 bytes_read=640171 bytes_retransmit=9 bytes_invalid=0 send_seq=34626 receive_seq=34626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=340793 sysload=0.00 cputime=90.151 memavail=1629348 print_time=3052.325 buffer_time=2.165 print_stall=0 extruder: target=215 temp=214.3 pwm=0.658
Stats 3042.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1224923 bytes_read=640602 bytes_retransmit=9 bytes_invalid=0 send_seq=34652 receive_seq=34652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=340914 sysload=0.00 cputime=90.210 memavail=1628840 print_time=3053.361 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.5 pwm=0.562
Stats 3043.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1225869 bytes_read=641029 bytes_retransmit=9 bytes_invalid=0 send_seq=34677 receive_seq=34677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=341064 sysload=0.00 cputime=90.267 memavail=1629096 print_time=3054.289 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.7 pwm=0.441
Stats 3044.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1227296 bytes_read=641501 bytes_retransmit=9 bytes_invalid=0 send_seq=34709 receive_seq=34708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=341340 sysload=0.00 cputime=90.327 memavail=1629364 print_time=3055.524 buffer_time=2.360 print_stall=0 extruder: target=215 temp=214.6 pwm=0.571
Stats 3045.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1228786 bytes_read=641977 bytes_retransmit=9 bytes_invalid=0 send_seq=34744 receive_seq=34743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=341770 sysload=0.00 cputime=90.387 memavail=1629852 print_time=3056.686 buffer_time=2.521 print_stall=0 extruder: target=215 temp=214.4 pwm=0.670
Stats 3046.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1229345 bytes_read=642359 bytes_retransmit=9 bytes_invalid=0 send_seq=34763 receive_seq=34762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=341851 sysload=0.00 cputime=90.442 memavail=1629868 print_time=3057.454 buffer_time=2.288 print_stall=0 extruder: target=215 temp=214.6 pwm=0.488
Stats 3047.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1230011 bytes_read=642790 bytes_retransmit=9 bytes_invalid=0 send_seq=34783 receive_seq=34782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=341937 sysload=0.00 cputime=90.498 memavail=1629852 print_time=3058.429 buffer_time=2.260 print_stall=0 extruder: target=215 temp=214.6 pwm=0.559
Stats 3048.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1230523 bytes_read=643187 bytes_retransmit=9 bytes_invalid=0 send_seq=34801 receive_seq=34801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=342025 sysload=0.00 cputime=90.550 memavail=1630128 print_time=3059.352 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.6 pwm=0.564
Stats 3049.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1231086 bytes_read=643575 bytes_retransmit=9 bytes_invalid=0 send_seq=34819 receive_seq=34819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=342144 sysload=0.00 cputime=90.607 memavail=1629612 print_time=3060.305 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.401
Stats 3050.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1231663 bytes_read=643986 bytes_retransmit=9 bytes_invalid=0 send_seq=34835 receive_seq=34835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=342230 sysload=0.00 cputime=90.664 memavail=1629120 print_time=3061.205 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 3051.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1232615 bytes_read=644393 bytes_retransmit=9 bytes_invalid=0 send_seq=34859 receive_seq=34859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=342351 sysload=0.00 cputime=90.706 memavail=1629304 print_time=3062.364 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 3052.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1233838 bytes_read=644840 bytes_retransmit=9 bytes_invalid=0 send_seq=34888 receive_seq=34888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=56.0 mcu_temp: temp=39.4 sd_pos=342617 sysload=0.00 cputime=90.768 memavail=1629320 print_time=3063.915 buffer_time=2.736 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 3053.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1234687 bytes_read=645281 bytes_retransmit=9 bytes_invalid=0 send_seq=34910 receive_seq=34910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=342797 sysload=0.00 cputime=90.812 memavail=1629060 print_time=3064.902 buffer_time=2.723 print_stall=0 extruder: target=215 temp=215.0 pwm=0.541
Stats 3054.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1235370 bytes_read=645673 bytes_retransmit=9 bytes_invalid=0 send_seq=34931 receive_seq=34931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=342915 sysload=0.00 cputime=90.866 memavail=1629252 print_time=3065.693 buffer_time=2.513 print_stall=0 extruder: target=215 temp=215.2 pwm=0.429
Stats 3055.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1236271 bytes_read=646090 bytes_retransmit=9 bytes_invalid=0 send_seq=34955 receive_seq=34954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=343095 sysload=0.00 cputime=90.926 memavail=1629020 print_time=3066.681 buffer_time=2.496 print_stall=0 extruder: target=215 temp=215.2 pwm=0.483
Stats 3056.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1236922 bytes_read=646516 bytes_retransmit=9 bytes_invalid=0 send_seq=34976 receive_seq=34976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=343184 sysload=0.00 cputime=90.964 memavail=1629272 print_time=3067.390 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.2 pwm=0.408
Stats 3057.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1237502 bytes_read=646898 bytes_retransmit=9 bytes_invalid=0 send_seq=34995 receive_seq=34995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=343270 sysload=0.00 cputime=91.019 memavail=1628712 print_time=3068.327 buffer_time=2.141 print_stall=0 extruder: target=215 temp=215.2 pwm=0.449
Stats 3058.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=1238125 bytes_read=647295 bytes_retransmit=9 bytes_invalid=0 send_seq=35011 receive_seq=35011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.493 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=343362 sysload=0.00 cputime=91.074 memavail=1628944 print_time=3069.574 buffer_time=2.387 print_stall=0 extruder: target=215 temp=215.2 pwm=0.533
Stats 3059.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=1239031 bytes_read=647736 bytes_retransmit=9 bytes_invalid=0 send_seq=35036 receive_seq=35036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.629 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=343449 sysload=0.00 cputime=91.112 memavail=1629028 print_time=3070.204 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.4 pwm=0.414
Stats 3060.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=1240288 bytes_read=648153 bytes_retransmit=9 bytes_invalid=0 send_seq=35063 receive_seq=35062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=343738 sysload=0.00 cputime=91.176 memavail=1628440 print_time=3071.925 buffer_time=2.733 print_stall=0 extruder: target=215 temp=215.3 pwm=0.508
Stats 3061.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=1240885 bytes_read=648550 bytes_retransmit=9 bytes_invalid=0 send_seq=35081 receive_seq=35081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=343856 sysload=0.08 cputime=91.216 memavail=1628656 print_time=3072.704 buffer_time=2.512 print_stall=0 extruder: target=215 temp=215.4 pwm=0.485
Stats 3062.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=1241591 bytes_read=648981 bytes_retransmit=9 bytes_invalid=0 send_seq=35104 receive_seq=35104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.742 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=343976 sysload=0.08 cputime=91.267 memavail=1628832 print_time=3073.483 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.5 pwm=0.401
Stats 3063.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1242203 bytes_read=649383 bytes_retransmit=9 bytes_invalid=0 send_seq=35124 receive_seq=35124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.145 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=344095 sysload=0.08 cputime=91.302 memavail=1628596 print_time=3074.301 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.6 pwm=0.370
Stats 3064.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1242849 bytes_read=649780 bytes_retransmit=9 bytes_invalid=0 send_seq=35143 receive_seq=35143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.405 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=344217 sysload=0.08 cputime=91.357 memavail=1628636 print_time=3075.360 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.6 pwm=0.412
Stats 3065.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1244227 bytes_read=650241 bytes_retransmit=9 bytes_invalid=0 send_seq=35173 receive_seq=35172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=344410 sysload=0.08 cputime=91.417 memavail=1628556 print_time=3076.897 buffer_time=2.702 print_stall=0 extruder: target=215 temp=215.6 pwm=0.388
Stats 3066.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1244687 bytes_read=650618 bytes_retransmit=9 bytes_invalid=0 send_seq=35190 receive_seq=35190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=344470 sysload=0.08 cputime=91.466 memavail=1628836 print_time=3077.294 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.5 pwm=0.495
Stats 3067.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1245369 bytes_read=651010 bytes_retransmit=9 bytes_invalid=0 send_seq=35208 receive_seq=35208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=344556 sysload=0.08 cputime=91.514 memavail=1628852 print_time=3078.269 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.4 pwm=0.503
Stats 3068.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1245907 bytes_read=651426 bytes_retransmit=9 bytes_invalid=0 send_seq=35225 receive_seq=35225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=344640 sysload=0.08 cputime=91.563 memavail=1628788 print_time=3079.270 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.4 pwm=0.503
Stats 3069.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1246520 bytes_read=651808 bytes_retransmit=9 bytes_invalid=0 send_seq=35244 receive_seq=35244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=344755 sysload=0.08 cputime=91.611 memavail=1628788 print_time=3080.301 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.5 pwm=0.421
Stats 3070.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1247754 bytes_read=652250 bytes_retransmit=9 bytes_invalid=0 send_seq=35273 receive_seq=35272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.086 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=345248 sysload=0.08 cputime=91.665 memavail=1629372 print_time=3081.424 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.3 pwm=0.565
Stats 3071.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1248684 bytes_read=652701 bytes_retransmit=9 bytes_invalid=0 send_seq=35299 receive_seq=35299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=345956 sysload=0.07 cputime=91.728 memavail=1629672 print_time=3082.325 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.4 pwm=0.416
Stats 3072.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1249992 bytes_read=653138 bytes_retransmit=9 bytes_invalid=0 send_seq=35329 receive_seq=35329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=346770 sysload=0.07 cputime=91.797 memavail=1629664 print_time=3083.493 buffer_time=2.287 print_stall=0 extruder: target=215 temp=215.4 pwm=0.444
Stats 3073.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=1250980 bytes_read=653575 bytes_retransmit=9 bytes_invalid=0 send_seq=35354 receive_seq=35353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=347481 sysload=0.07 cputime=91.864 memavail=1629740 print_time=3084.352 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.3 pwm=0.460
Stats 3074.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=1252079 bytes_read=654021 bytes_retransmit=9 bytes_invalid=0 send_seq=35379 receive_seq=35379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=54.0 mcu_temp: temp=40.1 sd_pos=348208 sysload=0.07 cputime=91.936 memavail=1629468 print_time=3085.385 buffer_time=2.174 print_stall=0 extruder: target=215 temp=215.3 pwm=0.444
Stats 3075.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=1253001 bytes_read=654418 bytes_retransmit=9 bytes_invalid=0 send_seq=35402 receive_seq=35401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.316 rpi: temp=54.0 mcu_temp: temp=39.9 sd_pos=348636 sysload=0.07 cputime=91.992 memavail=1629484 print_time=3086.261 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.3 pwm=0.422
Stats 3076.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=1254076 bytes_read=654870 bytes_retransmit=9 bytes_invalid=0 send_seq=35429 receive_seq=35428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.182 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=349676 sysload=0.06 cputime=92.035 memavail=1629476 print_time=3087.341 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.1 pwm=0.533
Stats 3077.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000043 bytes_write=1254726 bytes_read=655276 bytes_retransmit=9 bytes_invalid=0 send_seq=35449 receive_seq=35449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=350187 sysload=0.06 cputime=92.071 memavail=1629492 print_time=3088.215 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.0 pwm=0.599
Stats 3078.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=1256225 bytes_read=655743 bytes_retransmit=9 bytes_invalid=0 send_seq=35482 receive_seq=35482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=350488 sysload=0.06 cputime=92.132 memavail=1629560 print_time=3089.488 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 3079.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=1257145 bytes_read=656170 bytes_retransmit=9 bytes_invalid=0 send_seq=35505 receive_seq=35504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.452 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=350633 sysload=0.06 cputime=92.188 memavail=1629804 print_time=3090.419 buffer_time=2.204 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 3080.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=1258092 bytes_read=656606 bytes_retransmit=9 bytes_invalid=0 send_seq=35532 receive_seq=35531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=350810 sysload=0.06 cputime=92.246 memavail=1629080 print_time=3091.489 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 3081.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=1259051 bytes_read=657018 bytes_retransmit=9 bytes_invalid=0 send_seq=35556 receive_seq=35556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=350958 sysload=0.06 cputime=92.287 memavail=1629316 print_time=3092.639 buffer_time=2.416 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 3082.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000071 bytes_write=1259675 bytes_read=657440 bytes_retransmit=9 bytes_invalid=0 send_seq=35577 receive_seq=35577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=351018 sysload=0.06 cputime=92.339 memavail=1629316 print_time=3093.243 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 3083.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1260632 bytes_read=657881 bytes_retransmit=9 bytes_invalid=0 send_seq=35602 receive_seq=35602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=351160 sysload=0.06 cputime=92.393 memavail=1629584 print_time=3094.493 buffer_time=2.269 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 3084.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1261675 bytes_read=658288 bytes_retransmit=9 bytes_invalid=0 send_seq=35626 receive_seq=35626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.046 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=351275 sysload=0.06 cputime=92.450 memavail=1629824 print_time=3095.755 buffer_time=2.531 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 3085.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1262290 bytes_read=658695 bytes_retransmit=9 bytes_invalid=0 send_seq=35645 receive_seq=35644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=351362 sysload=0.06 cputime=92.503 memavail=1629836 print_time=3096.383 buffer_time=2.158 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 3086.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1263287 bytes_read=659136 bytes_retransmit=9 bytes_invalid=0 send_seq=35672 receive_seq=35672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=351509 sysload=0.05 cputime=92.557 memavail=1630084 print_time=3097.623 buffer_time=2.398 print_stall=0 extruder: target=215 temp=214.8 pwm=0.485
Stats 3087.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1263972 bytes_read=659528 bytes_retransmit=9 bytes_invalid=0 send_seq=35693 receive_seq=35693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.666 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=351568 sysload=0.05 cputime=92.609 memavail=1629828 print_time=3098.226 buffer_time=2.001 print_stall=0 extruder: target=215 temp=214.7 pwm=0.548
Stats 3088.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1264918 bytes_read=659985 bytes_retransmit=9 bytes_invalid=0 send_seq=35718 receive_seq=35718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=351714 sysload=0.05 cputime=92.665 memavail=1630060 print_time=3099.394 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.7 pwm=0.548
Stats 3089.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1265946 bytes_read=660416 bytes_retransmit=9 bytes_invalid=0 send_seq=35745 receive_seq=35744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=351891 sysload=0.05 cputime=92.720 memavail=1630088 print_time=3100.490 buffer_time=2.260 print_stall=0 extruder: target=215 temp=214.7 pwm=0.501
Stats 3090.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1266887 bytes_read=660828 bytes_retransmit=9 bytes_invalid=0 send_seq=35770 receive_seq=35769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=352065 sysload=0.05 cputime=92.775 memavail=1629584 print_time=3101.451 buffer_time=2.221 print_stall=0 extruder: target=215 temp=214.8 pwm=0.482
Stats 3091.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1268140 bytes_read=661305 bytes_retransmit=9 bytes_invalid=0 send_seq=35802 receive_seq=35801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=352526 sysload=0.05 cputime=92.833 memavail=1630096 print_time=3102.451 buffer_time=2.219 print_stall=0 extruder: target=215 temp=214.7 pwm=0.576
Stats 3092.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1269015 bytes_read=661715 bytes_retransmit=9 bytes_invalid=0 send_seq=35824 receive_seq=35824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.284 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=352963 sysload=0.05 cputime=92.889 memavail=1630088 print_time=3103.237 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 3093.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1270350 bytes_read=662157 bytes_retransmit=9 bytes_invalid=0 send_seq=35855 receive_seq=35854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=353757 sysload=0.05 cputime=92.957 memavail=1630088 print_time=3104.543 buffer_time=2.308 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 3094.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1271109 bytes_read=662572 bytes_retransmit=9 bytes_invalid=0 send_seq=35877 receive_seq=35876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=354225 sysload=0.05 cputime=93.017 memavail=1630312 print_time=3105.344 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 3095.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1272003 bytes_read=662987 bytes_retransmit=9 bytes_invalid=0 send_seq=35902 receive_seq=35901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=54.9 pwm=0.611 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=354898 sysload=0.05 cputime=93.079 memavail=1629912 print_time=3106.270 buffer_time=2.032 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 3096.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1272869 bytes_read=663391 bytes_retransmit=9 bytes_invalid=0 send_seq=35925 receive_seq=35925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=355470 sysload=0.13 cputime=93.135 memavail=1629920 print_time=3107.363 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 3097.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1273587 bytes_read=663803 bytes_retransmit=9 bytes_invalid=0 send_seq=35945 receive_seq=35944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=355903 sysload=0.13 cputime=93.173 memavail=1629912 print_time=3108.469 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 3098.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1274470 bytes_read=664254 bytes_retransmit=9 bytes_invalid=0 send_seq=35971 receive_seq=35971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=10 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.440 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=356887 sysload=0.13 cputime=93.216 memavail=1629920 print_time=3109.348 buffer_time=2.107 print_stall=0 extruder: target=215 temp=215.0 pwm=0.432
Stats 3099.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1275795 bytes_read=664686 bytes_retransmit=9 bytes_invalid=0 send_seq=36001 receive_seq=36000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.536 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=357127 sysload=0.13 cputime=93.271 memavail=1629904 print_time=3110.456 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.8 pwm=0.563
Stats 3100.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1276711 bytes_read=665128 bytes_retransmit=9 bytes_invalid=0 send_seq=36026 receive_seq=36025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=357279 sysload=0.13 cputime=93.325 memavail=1629668 print_time=3111.387 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 3101.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1277597 bytes_read=665559 bytes_retransmit=9 bytes_invalid=0 send_seq=36051 receive_seq=36051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.086 rpi: temp=54.5 mcu_temp: temp=40.0 sd_pos=357430 sysload=0.20 cputime=93.376 memavail=1629916 print_time=3112.439 buffer_time=2.196 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 3102.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1278630 bytes_read=665961 bytes_retransmit=9 bytes_invalid=0 send_seq=36075 receive_seq=36074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=357552 sysload=0.20 cputime=93.411 memavail=1630184 print_time=3113.549 buffer_time=2.303 print_stall=0 extruder: target=215 temp=214.8 pwm=0.514
Stats 3103.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1279658 bytes_read=666428 bytes_retransmit=9 bytes_invalid=0 send_seq=36102 receive_seq=36101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=357732 sysload=0.20 cputime=93.466 memavail=1629860 print_time=3114.735 buffer_time=2.489 print_stall=0 extruder: target=215 temp=214.8 pwm=0.515
Stats 3104.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1280280 bytes_read=666839 bytes_retransmit=9 bytes_invalid=0 send_seq=36123 receive_seq=36123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=357791 sysload=0.20 cputime=93.516 memavail=1630188 print_time=3115.324 buffer_time=2.075 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 3105.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1281283 bytes_read=667256 bytes_retransmit=9 bytes_invalid=0 send_seq=36149 receive_seq=36149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.345 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=357913 sysload=0.20 cputime=93.569 memavail=1629864 print_time=3116.540 buffer_time=2.289 print_stall=0 extruder: target=215 temp=214.8 pwm=0.513
Stats 3106.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1282318 bytes_read=667698 bytes_retransmit=9 bytes_invalid=0 send_seq=36174 receive_seq=36174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=358095 sysload=0.18 cputime=93.623 memavail=1629840 print_time=3117.766 buffer_time=2.513 print_stall=0 extruder: target=215 temp=214.6 pwm=0.587
Stats 3107.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1282979 bytes_read=668099 bytes_retransmit=9 bytes_invalid=0 send_seq=36196 receive_seq=36194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=358156 sysload=0.18 cputime=93.673 memavail=1629848 print_time=3118.372 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.5 pwm=0.641
Stats 3108.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1284003 bytes_read=668557 bytes_retransmit=9 bytes_invalid=0 send_seq=36224 receive_seq=36223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=358308 sysload=0.18 cputime=93.730 memavail=1629612 print_time=3119.556 buffer_time=2.301 print_stall=0 extruder: target=215 temp=214.5 pwm=0.669
Stats 3109.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1285007 bytes_read=669009 bytes_retransmit=9 bytes_invalid=0 send_seq=36250 receive_seq=36250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=358429 sysload=0.18 cputime=93.787 memavail=1629368 print_time=3120.675 buffer_time=2.419 print_stall=0 extruder: target=215 temp=214.4 pwm=0.654
Stats 3110.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1286006 bytes_read=669445 bytes_retransmit=9 bytes_invalid=0 send_seq=36277 receive_seq=36277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996444 heater_bed: target=55 temp=55.1 pwm=0.009 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=358611 sysload=0.18 cputime=93.841 memavail=1628860 print_time=3121.706 buffer_time=2.449 print_stall=0 extruder: target=215 temp=214.5 pwm=0.603
Stats 3111.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1286827 bytes_read=669847 bytes_retransmit=9 bytes_invalid=0 send_seq=36300 receive_seq=36300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996441 heater_bed: target=55 temp=55.0 pwm=0.338 rpi: temp=54.0 mcu_temp: temp=40.0 sd_pos=358794 sysload=0.16 cputime=93.876 memavail=1628872 print_time=3122.588 buffer_time=2.331 print_stall=0 extruder: target=215 temp=214.5 pwm=0.578
Stats 3112.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1288022 bytes_read=670299 bytes_retransmit=9 bytes_invalid=0 send_seq=36328 receive_seq=36327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996438 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=358994 sysload=0.16 cputime=93.929 memavail=1628604 print_time=3123.426 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.6 pwm=0.508
Stats 3113.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1289559 bytes_read=670800 bytes_retransmit=9 bytes_invalid=0 send_seq=36364 receive_seq=36364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996435 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=359422 sysload=0.16 cputime=93.986 memavail=1628620 print_time=3124.604 buffer_time=2.344 print_stall=0 extruder: target=215 temp=214.7 pwm=0.473
Stats 3114.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1290163 bytes_read=671182 bytes_retransmit=9 bytes_invalid=0 send_seq=36383 receive_seq=36383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996431 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=359503 sysload=0.16 cputime=94.038 memavail=1628884 print_time=3125.372 buffer_time=2.111 print_stall=0 extruder: target=215 temp=214.6 pwm=0.568
Stats 3115.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1290827 bytes_read=671589 bytes_retransmit=9 bytes_invalid=0 send_seq=36402 receive_seq=36401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996428 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=359589 sysload=0.16 cputime=94.092 memavail=1629096 print_time=3126.347 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.6 pwm=0.562
Stats 3116.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1291342 bytes_read=671990 bytes_retransmit=9 bytes_invalid=0 send_seq=36421 receive_seq=36421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996425 heater_bed: target=55 temp=55.0 pwm=0.365 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=359677 sysload=0.15 cputime=94.145 memavail=1628888 print_time=3127.270 buffer_time=2.007 print_stall=0 extruder: target=215 temp=214.7 pwm=0.546
Stats 3117.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1292064 bytes_read=672377 bytes_retransmit=9 bytes_invalid=0 send_seq=36441 receive_seq=36441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996422 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=359824 sysload=0.15 cputime=94.203 memavail=1629112 print_time=3128.496 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.9 pwm=0.383
Stats 3118.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1292834 bytes_read=672819 bytes_retransmit=9 bytes_invalid=0 send_seq=36464 receive_seq=36463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=359938 sysload=0.15 cputime=94.259 memavail=1629116 print_time=3129.775 buffer_time=2.508 print_stall=0 extruder: target=215 temp=214.9 pwm=0.435
Stats 3119.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1293499 bytes_read=673230 bytes_retransmit=9 bytes_invalid=0 send_seq=36485 receive_seq=36485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.1 pwm=0.133 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=360003 sysload=0.15 cputime=94.312 memavail=1629132 print_time=3130.283 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 3120.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1294728 bytes_read=673652 bytes_retransmit=9 bytes_invalid=0 send_seq=36512 receive_seq=36512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=360269 sysload=0.15 cputime=94.367 memavail=1628620 print_time=3131.834 buffer_time=2.565 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 3121.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1295627 bytes_read=674103 bytes_retransmit=9 bytes_invalid=0 send_seq=36537 receive_seq=36536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.508 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=360449 sysload=0.22 cputime=94.406 memavail=1628852 print_time=3132.821 buffer_time=2.551 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 3122.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1296346 bytes_read=674510 bytes_retransmit=9 bytes_invalid=0 send_seq=36560 receive_seq=36560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.236 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=360567 sysload=0.22 cputime=94.459 memavail=1629112 print_time=3133.612 buffer_time=2.341 print_stall=0 extruder: target=215 temp=215.0 pwm=0.545
Stats 3123.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1297196 bytes_read=674927 bytes_retransmit=9 bytes_invalid=0 send_seq=36583 receive_seq=36583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=360747 sysload=0.22 cputime=94.518 memavail=1629352 print_time=3134.599 buffer_time=2.327 print_stall=0 extruder: target=215 temp=215.1 pwm=0.516
Stats 3124.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1297824 bytes_read=675348 bytes_retransmit=9 bytes_invalid=0 send_seq=36601 receive_seq=36601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.0 pwm=0.472 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=360836 sysload=0.22 cputime=94.570 memavail=1629344 print_time=3135.308 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.1 pwm=0.516
Stats 3125.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1298508 bytes_read=675730 bytes_retransmit=9 bytes_invalid=0 send_seq=36620 receive_seq=36620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.0 pwm=0.527 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=360951 sysload=0.22 cputime=94.622 memavail=1629600 print_time=3136.600 buffer_time=2.326 print_stall=0 extruder: target=215 temp=215.3 pwm=0.409
Stats 3126.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1299065 bytes_read=676112 bytes_retransmit=9 bytes_invalid=0 send_seq=36639 receive_seq=36639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=54.8 pwm=0.949 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=361014 sysload=0.28 cputime=94.673 memavail=1629864 print_time=3137.493 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.4 pwm=0.449
Stats 3127.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1300152 bytes_read=676573 bytes_retransmit=9 bytes_invalid=0 send_seq=36666 receive_seq=36665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=54.9 pwm=0.505 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=361188 sysload=0.28 cputime=94.730 memavail=1629620 print_time=3138.316 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.6 pwm=0.379
Stats 3128.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1301166 bytes_read=677015 bytes_retransmit=9 bytes_invalid=0 send_seq=36693 receive_seq=36693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.364 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=361390 sysload=0.28 cputime=94.788 memavail=1629636 print_time=3139.844 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.6 pwm=0.424
Stats 3129.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1301812 bytes_read=677402 bytes_retransmit=9 bytes_invalid=0 send_seq=36711 receive_seq=36710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=361508 sysload=0.28 cputime=94.842 memavail=1630124 print_time=3140.623 buffer_time=2.343 print_stall=0 extruder: target=215 temp=215.6 pwm=0.424
Stats 3130.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1302429 bytes_read=677818 bytes_retransmit=9 bytes_invalid=0 send_seq=36730 receive_seq=36730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=361628 sysload=0.28 cputime=94.895 memavail=1629624 print_time=3141.402 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.7 pwm=0.354
Stats 3131.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1303229 bytes_read=678210 bytes_retransmit=9 bytes_invalid=0 send_seq=36751 receive_seq=36751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.490 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=361807 sysload=0.34 cputime=94.935 memavail=1629336 print_time=3142.884 buffer_time=2.603 print_stall=0 extruder: target=215 temp=215.7 pwm=0.437
Stats 3132.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1303630 bytes_read=678587 bytes_retransmit=9 bytes_invalid=0 send_seq=36766 receive_seq=36766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=361869 sysload=0.34 cputime=94.984 memavail=1629316 print_time=3143.278 buffer_time=1.994 print_stall=0 extruder: target=215 temp=215.5 pwm=0.497
Stats 3133.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1304972 bytes_read=679078 bytes_retransmit=9 bytes_invalid=0 send_seq=36798 receive_seq=36798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=362062 sysload=0.34 cputime=95.043 memavail=1629580 print_time=3144.815 buffer_time=2.529 print_stall=0 extruder: target=215 temp=215.6 pwm=0.464
Stats 3134.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1305533 bytes_read=679455 bytes_retransmit=9 bytes_invalid=0 send_seq=36816 receive_seq=36816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=362152 sysload=0.34 cputime=95.093 memavail=1629412 print_time=3145.523 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.7 pwm=0.371
Stats 3135.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1306109 bytes_read=679852 bytes_retransmit=9 bytes_invalid=0 send_seq=36835 receive_seq=36835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=362235 sysload=0.34 cputime=95.147 memavail=1629156 print_time=3146.541 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.5 pwm=0.525
Stats 3136.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1306840 bytes_read=680273 bytes_retransmit=9 bytes_invalid=0 send_seq=36857 receive_seq=36856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.452 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=362348 sysload=0.47 cputime=95.201 memavail=1629388 print_time=3147.555 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.5 pwm=0.484
Stats 3137.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1307511 bytes_read=680670 bytes_retransmit=9 bytes_invalid=0 send_seq=36878 receive_seq=36878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.216 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=362466 sysload=0.47 cputime=95.257 memavail=1629664 print_time=3148.614 buffer_time=2.323 print_stall=0 extruder: target=215 temp=215.5 pwm=0.449
Stats 3138.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1308641 bytes_read=681127 bytes_retransmit=9 bytes_invalid=0 send_seq=36906 receive_seq=36906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.448 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=362925 sysload=0.47 cputime=95.314 memavail=1629644 print_time=3149.357 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.4 pwm=0.465
Stats 3139.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1309456 bytes_read=681548 bytes_retransmit=9 bytes_invalid=0 send_seq=36927 receive_seq=36927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=58 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=54.0 mcu_temp: temp=40.2 sd_pos=363601 sysload=0.47 cputime=95.378 memavail=1629968 print_time=3150.458 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.3 pwm=0.530
Stats 3140.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1310515 bytes_read=681960 bytes_retransmit=9 bytes_invalid=0 send_seq=36952 receive_seq=36952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=364216 sysload=0.47 cputime=95.443 memavail=1630208 print_time=3151.513 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.4 pwm=0.404
Stats 3141.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1311268 bytes_read=682357 bytes_retransmit=9 bytes_invalid=0 send_seq=36971 receive_seq=36971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=364742 sysload=0.47 cputime=95.483 memavail=1630440 print_time=3152.399 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.3 pwm=0.511
Stats 3142.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1312287 bytes_read=682788 bytes_retransmit=9 bytes_invalid=0 send_seq=36994 receive_seq=36994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=365391 sysload=0.52 cputime=95.546 memavail=1630456 print_time=3153.561 buffer_time=2.264 print_stall=0 extruder: target=215 temp=215.2 pwm=0.511
Stats 3143.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1313043 bytes_read=683190 bytes_retransmit=9 bytes_invalid=0 send_seq=37014 receive_seq=37014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=365845 sysload=0.52 cputime=95.608 memavail=1630256 print_time=3154.711 buffer_time=2.413 print_stall=0 extruder: target=215 temp=215.3 pwm=0.421
Stats 3144.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1313979 bytes_read=683602 bytes_retransmit=9 bytes_invalid=0 send_seq=37037 receive_seq=37036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=10 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.499 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=366635 sysload=0.52 cputime=95.669 memavail=1630296 print_time=3155.802 buffer_time=2.503 print_stall=0 extruder: target=215 temp=215.1 pwm=0.541
Stats 3145.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1314700 bytes_read=684033 bytes_retransmit=9 bytes_invalid=0 send_seq=37059 receive_seq=37059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=366923 sysload=0.52 cputime=95.727 memavail=1629984 print_time=3156.328 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.2 pwm=0.438
Stats 3146.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1315931 bytes_read=684460 bytes_retransmit=9 bytes_invalid=0 send_seq=37088 receive_seq=37087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.367 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=367159 sysload=0.52 cputime=95.783 memavail=1630264 print_time=3157.384 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 3147.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1316801 bytes_read=684877 bytes_retransmit=9 bytes_invalid=0 send_seq=37110 receive_seq=37110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.462 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=367277 sysload=0.63 cputime=95.837 memavail=1630008 print_time=3158.311 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.0 pwm=0.541
Stats 3148.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1317724 bytes_read=685333 bytes_retransmit=9 bytes_invalid=0 send_seq=37135 receive_seq=37135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=367422 sysload=0.63 cputime=95.892 memavail=1629644 print_time=3159.359 buffer_time=2.055 print_stall=0 extruder: target=215 temp=214.8 pwm=0.623
Stats 3149.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1318640 bytes_read=685735 bytes_retransmit=9 bytes_invalid=0 send_seq=37158 receive_seq=37158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=367539 sysload=0.63 cputime=95.943 memavail=1629416 print_time=3160.466 buffer_time=2.162 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 3150.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1319651 bytes_read=686162 bytes_retransmit=9 bytes_invalid=0 send_seq=37183 receive_seq=37183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.173 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=367685 sysload=0.63 cputime=96.000 memavail=1629400 print_time=3161.635 buffer_time=2.329 print_stall=0 extruder: target=215 temp=214.9 pwm=0.467
Stats 3151.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1320691 bytes_read=686613 bytes_retransmit=9 bytes_invalid=0 send_seq=37210 receive_seq=37210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=367801 sysload=0.63 cputime=96.038 memavail=1629456 print_time=3162.831 buffer_time=2.524 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 3152.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1321292 bytes_read=686981 bytes_retransmit=9 bytes_invalid=0 send_seq=37228 receive_seq=37228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.153 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=367861 sysload=0.74 cputime=96.085 memavail=1629180 print_time=3163.429 buffer_time=2.121 print_stall=0 extruder: target=215 temp=214.7 pwm=0.587
Stats 3153.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1322385 bytes_read=687426 bytes_retransmit=9 bytes_invalid=0 send_seq=37254 receive_seq=37253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=368005 sysload=0.74 cputime=96.140 memavail=1629436 print_time=3164.621 buffer_time=2.312 print_stall=0 extruder: target=215 temp=214.7 pwm=0.584
Stats 3154.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1323347 bytes_read=687846 bytes_retransmit=9 bytes_invalid=0 send_seq=37279 receive_seq=37279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=368119 sysload=0.74 cputime=96.192 memavail=1629956 print_time=3165.773 buffer_time=2.462 print_stall=0 extruder: target=215 temp=214.7 pwm=0.610
Stats 3155.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1324010 bytes_read=688226 bytes_retransmit=9 bytes_invalid=0 send_seq=37299 receive_seq=37299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.443 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=368206 sysload=0.74 cputime=96.244 memavail=1629700 print_time=3166.330 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.8 pwm=0.528
Stats 3156.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1325055 bytes_read=688668 bytes_retransmit=9 bytes_invalid=0 send_seq=37325 receive_seq=37324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=368354 sysload=0.74 cputime=96.298 memavail=1629956 print_time=3167.396 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.8 pwm=0.556
Stats 3157.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1325914 bytes_read=689084 bytes_retransmit=9 bytes_invalid=0 send_seq=37347 receive_seq=37347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=368499 sysload=0.84 cputime=96.352 memavail=1629688 print_time=3168.370 buffer_time=2.055 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 3158.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1327018 bytes_read=689506 bytes_retransmit=9 bytes_invalid=0 send_seq=37371 receive_seq=37371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.179 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=368728 sysload=0.84 cputime=96.409 memavail=1629888 print_time=3169.620 buffer_time=2.304 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 3159.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1328562 bytes_read=689993 bytes_retransmit=9 bytes_invalid=0 send_seq=37406 receive_seq=37405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=369269 sysload=0.84 cputime=96.470 memavail=1630212 print_time=3170.576 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 3160.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1329379 bytes_read=690409 bytes_retransmit=9 bytes_invalid=0 send_seq=37428 receive_seq=37428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=369816 sysload=0.84 cputime=96.534 memavail=1629452 print_time=3171.348 buffer_time=2.030 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 3161.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1330606 bytes_read=690831 bytes_retransmit=9 bytes_invalid=0 send_seq=37455 receive_seq=37455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.523 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=370631 sysload=0.84 cputime=96.582 memavail=1630212 print_time=3172.534 buffer_time=2.214 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 3162.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1331403 bytes_read=691258 bytes_retransmit=9 bytes_invalid=0 send_seq=37477 receive_seq=37477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=371204 sysload=0.86 cputime=96.640 memavail=1630452 print_time=3173.360 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.2 pwm=0.326
Stats 3163.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=1332293 bytes_read=691684 bytes_retransmit=9 bytes_invalid=0 send_seq=37499 receive_seq=37499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.045 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=371930 sysload=0.86 cputime=96.703 memavail=1630724 print_time=3174.423 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 3164.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=1333588 bytes_read=692126 bytes_retransmit=9 bytes_invalid=0 send_seq=37530 receive_seq=37530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=10 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=372929 sysload=0.86 cputime=96.767 memavail=1630780 print_time=3175.572 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.0 pwm=0.575
Stats 3165.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=1334227 bytes_read=692543 bytes_retransmit=9 bytes_invalid=0 send_seq=37550 receive_seq=37550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=373294 sysload=0.86 cputime=96.827 memavail=1631044 print_time=3176.421 buffer_time=2.099 print_stall=0 extruder: target=215 temp=214.9 pwm=0.669
Stats 3166.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=1334886 bytes_read=692939 bytes_retransmit=9 bytes_invalid=0 send_seq=37569 receive_seq=37569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.8 pwm=0.729 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=373781 sysload=0.86 cputime=96.884 memavail=1630776 print_time=3177.358 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.2 pwm=0.476
Stats 3167.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=1336208 bytes_read=693392 bytes_retransmit=9 bytes_invalid=0 send_seq=37600 receive_seq=37600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=374116 sysload=0.87 cputime=96.941 memavail=1630776 print_time=3178.693 buffer_time=2.367 print_stall=0 extruder: target=215 temp=215.0 pwm=0.599
Stats 3168.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1337171 bytes_read=693849 bytes_retransmit=9 bytes_invalid=0 send_seq=37626 receive_seq=37625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=374267 sysload=0.87 cputime=96.997 memavail=1630520 print_time=3179.716 buffer_time=2.388 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 3169.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1338124 bytes_read=694280 bytes_retransmit=9 bytes_invalid=0 send_seq=37651 receive_seq=37651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.0 pwm=0.386 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=374389 sysload=0.87 cputime=97.051 memavail=1630536 print_time=3180.844 buffer_time=2.514 print_stall=0 extruder: target=215 temp=214.8 pwm=0.639
Stats 3170.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1338700 bytes_read=694657 bytes_retransmit=9 bytes_invalid=0 send_seq=37669 receive_seq=37669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=374449 sysload=0.87 cputime=97.101 memavail=1629556 print_time=3181.435 buffer_time=2.103 print_stall=0 extruder: target=215 temp=214.8 pwm=0.561
Stats 3171.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1339715 bytes_read=695104 bytes_retransmit=9 bytes_invalid=0 send_seq=37695 receive_seq=37695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=72 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=374600 sysload=0.87 cputime=97.154 memavail=1629676 print_time=3182.666 buffer_time=2.330 print_stall=0 extruder: target=215 temp=214.7 pwm=0.567
Stats 3172.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1340831 bytes_read=695545 bytes_retransmit=9 bytes_invalid=0 send_seq=37724 receive_seq=37723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=374751 sysload=0.88 cputime=97.209 memavail=1629936 print_time=3183.907 buffer_time=2.568 print_stall=0 extruder: target=215 temp=214.6 pwm=0.575
Stats 3173.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1341468 bytes_read=695947 bytes_retransmit=9 bytes_invalid=0 send_seq=37744 receive_seq=37743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.1 pwm=0.136 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=374812 sysload=0.88 cputime=97.259 memavail=1629840 print_time=3184.538 buffer_time=2.195 print_stall=0 extruder: target=215 temp=214.6 pwm=0.575
Stats 3174.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1342503 bytes_read=696399 bytes_retransmit=9 bytes_invalid=0 send_seq=37771 receive_seq=37770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=374995 sysload=0.88 cputime=97.314 memavail=1629876 print_time=3185.802 buffer_time=2.457 print_stall=0 extruder: target=215 temp=214.4 pwm=0.658
Stats 3175.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1343151 bytes_read=696810 bytes_retransmit=9 bytes_invalid=0 send_seq=37792 receive_seq=37792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.406 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=375055 sysload=0.88 cputime=97.366 memavail=1629936 print_time=3186.403 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.5 pwm=0.551
Stats 3176.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1344212 bytes_read=697232 bytes_retransmit=9 bytes_invalid=0 send_seq=37820 receive_seq=37819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=375203 sysload=0.88 cputime=97.421 memavail=1629924 print_time=3187.601 buffer_time=2.251 print_stall=0 extruder: target=215 temp=214.4 pwm=0.624
Stats 3177.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1345148 bytes_read=697684 bytes_retransmit=9 bytes_invalid=0 send_seq=37846 receive_seq=37846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=375354 sysload=0.97 cputime=97.475 memavail=1630180 print_time=3188.685 buffer_time=2.333 print_stall=0 extruder: target=215 temp=214.5 pwm=0.489
Stats 3178.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1346070 bytes_read=698120 bytes_retransmit=9 bytes_invalid=0 send_seq=37870 receive_seq=37870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.8 pwm=0.748 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=375475 sysload=0.97 cputime=97.528 memavail=1630200 print_time=3189.666 buffer_time=2.313 print_stall=0 extruder: target=215 temp=214.4 pwm=0.584
Stats 3179.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1346948 bytes_read=698512 bytes_retransmit=9 bytes_invalid=0 send_seq=37892 receive_seq=37891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=375627 sysload=0.97 cputime=97.579 memavail=1630436 print_time=3190.510 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.4 pwm=0.584
Stats 3180.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1348052 bytes_read=698974 bytes_retransmit=9 bytes_invalid=0 send_seq=37920 receive_seq=37920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=375850 sysload=0.97 cputime=97.632 memavail=1630200 print_time=3191.359 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.5 pwm=0.563
Stats 3181.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1349879 bytes_read=699465 bytes_retransmit=9 bytes_invalid=0 send_seq=37959 receive_seq=37958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=376749 sysload=0.97 cputime=97.675 memavail=1630244 print_time=3192.521 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.4 pwm=0.605
Stats 3182.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1350699 bytes_read=699857 bytes_retransmit=9 bytes_invalid=0 send_seq=37979 receive_seq=37979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=377412 sysload=0.97 cputime=97.736 memavail=1630236 print_time=3193.459 buffer_time=2.094 print_stall=0 extruder: target=215 temp=214.7 pwm=0.424
Stats 3183.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1352047 bytes_read=700338 bytes_retransmit=9 bytes_invalid=0 send_seq=38007 receive_seq=38006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=378381 sysload=0.97 cputime=97.803 memavail=1630460 print_time=3194.518 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.8 pwm=0.466
Stats 3184.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1352735 bytes_read=700730 bytes_retransmit=9 bytes_invalid=0 send_seq=38027 receive_seq=38027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=378966 sysload=0.97 cputime=97.863 memavail=1630248 print_time=3195.408 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.7 pwm=0.594
Stats 3185.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1354233 bytes_read=701182 bytes_retransmit=9 bytes_invalid=0 send_seq=38060 receive_seq=38060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=10 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.057 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=380126 sysload=0.97 cputime=97.935 memavail=1630256 print_time=3196.448 buffer_time=2.072 print_stall=0 extruder: target=215 temp=214.7 pwm=0.552
Stats 3186.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1354995 bytes_read=701613 bytes_retransmit=9 bytes_invalid=0 send_seq=38080 receive_seq=38080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=380610 sysload=0.97 cputime=97.994 memavail=1630256 print_time=3197.613 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 3187.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000060 bytes_write=1355631 bytes_read=701995 bytes_retransmit=9 bytes_invalid=0 send_seq=38099 receive_seq=38099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=381085 sysload=0.97 cputime=98.055 memavail=1630196 print_time=3198.474 buffer_time=2.093 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 3188.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1356764 bytes_read=702442 bytes_retransmit=9 bytes_invalid=0 send_seq=38125 receive_seq=38125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=381522 sysload=0.97 cputime=98.113 memavail=1630024 print_time=3199.511 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 3189.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1357652 bytes_read=702878 bytes_retransmit=9 bytes_invalid=0 send_seq=38149 receive_seq=38149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=381639 sysload=0.97 cputime=98.165 memavail=1629756 print_time=3200.387 buffer_time=1.999 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 3190.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1358494 bytes_read=703285 bytes_retransmit=9 bytes_invalid=0 send_seq=38173 receive_seq=38173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=381760 sysload=0.97 cputime=98.221 memavail=1629516 print_time=3201.409 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.546
Stats 3191.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1359512 bytes_read=703717 bytes_retransmit=9 bytes_invalid=0 send_seq=38199 receive_seq=38199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.038 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=381912 sysload=0.97 cputime=98.272 memavail=1629836 print_time=3202.536 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 3192.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1360542 bytes_read=704168 bytes_retransmit=9 bytes_invalid=0 send_seq=38226 receive_seq=38226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.118 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=382062 sysload=0.90 cputime=98.307 memavail=1629824 print_time=3203.744 buffer_time=2.351 print_stall=0 extruder: target=215 temp=215.1 pwm=0.529
Stats 3193.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1361549 bytes_read=704595 bytes_retransmit=9 bytes_invalid=0 send_seq=38252 receive_seq=38251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=382184 sysload=0.90 cputime=98.360 memavail=1629824 print_time=3204.964 buffer_time=2.570 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 3194.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1362133 bytes_read=704992 bytes_retransmit=9 bytes_invalid=0 send_seq=38270 receive_seq=38270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.171 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=382245 sysload=0.90 cputime=98.409 memavail=1629656 print_time=3205.584 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.1 pwm=0.500
Stats 3195.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1363164 bytes_read=705448 bytes_retransmit=9 bytes_invalid=0 send_seq=38298 receive_seq=38298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=382366 sysload=0.90 cputime=98.465 memavail=1629652 print_time=3206.815 buffer_time=2.417 print_stall=0 extruder: target=215 temp=215.2 pwm=0.424
Stats 3196.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1363833 bytes_read=705845 bytes_retransmit=9 bytes_invalid=0 send_seq=38320 receive_seq=38320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=382456 sysload=0.90 cputime=98.522 memavail=1629856 print_time=3207.434 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.3 pwm=0.407
Stats 3197.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1364750 bytes_read=706277 bytes_retransmit=9 bytes_invalid=0 send_seq=38346 receive_seq=38346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=382577 sysload=0.82 cputime=98.577 memavail=1629772 print_time=3208.606 buffer_time=2.207 print_stall=0 extruder: target=215 temp=215.1 pwm=0.512
Stats 3198.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1365779 bytes_read=706738 bytes_retransmit=9 bytes_invalid=0 send_seq=38373 receive_seq=38372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.228 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=382727 sysload=0.82 cputime=98.632 memavail=1629792 print_time=3209.725 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 3199.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1366691 bytes_read=707160 bytes_retransmit=9 bytes_invalid=0 send_seq=38399 receive_seq=38399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.494 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=382846 sysload=0.82 cputime=98.684 memavail=1629520 print_time=3210.762 buffer_time=2.359 print_stall=0 extruder: target=215 temp=214.9 pwm=0.591
Stats 3200.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1367643 bytes_read=707592 bytes_retransmit=9 bytes_invalid=0 send_seq=38426 receive_seq=38425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=383027 sysload=0.82 cputime=98.738 memavail=1629208 print_time=3211.693 buffer_time=2.290 print_stall=0 extruder: target=215 temp=214.8 pwm=0.654
Stats 3201.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1368558 bytes_read=708038 bytes_retransmit=9 bytes_invalid=0 send_seq=38452 receive_seq=38451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.115 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=383182 sysload=0.82 cputime=98.796 memavail=1629136 print_time=3212.454 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 3202.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1370134 bytes_read=708505 bytes_retransmit=9 bytes_invalid=0 send_seq=38488 receive_seq=38487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.121 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=383679 sysload=0.76 cputime=98.861 memavail=1629092 print_time=3213.754 buffer_time=2.348 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 3203.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1370684 bytes_read=708942 bytes_retransmit=9 bytes_invalid=0 send_seq=38508 receive_seq=38508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=383760 sysload=0.76 cputime=98.914 memavail=1629416 print_time=3214.523 buffer_time=2.115 print_stall=0 extruder: target=215 temp=214.7 pwm=0.569
Stats 3204.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1371291 bytes_read=709348 bytes_retransmit=9 bytes_invalid=0 send_seq=38529 receive_seq=38529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=383846 sysload=0.76 cputime=98.966 memavail=1629192 print_time=3215.498 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.7 pwm=0.573
Stats 3205.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1371851 bytes_read=709730 bytes_retransmit=9 bytes_invalid=0 send_seq=38548 receive_seq=38548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.073 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=383934 sysload=0.76 cputime=99.020 memavail=1629128 print_time=3216.420 buffer_time=2.010 print_stall=0 extruder: target=215 temp=214.9 pwm=0.432
Stats 3206.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1372564 bytes_read=710147 bytes_retransmit=9 bytes_invalid=0 send_seq=38569 receive_seq=38568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=62 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=384081 sysload=0.76 cputime=99.078 memavail=1629216 print_time=3217.646 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.7 pwm=0.582
Stats 3207.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1373361 bytes_read=710563 bytes_retransmit=9 bytes_invalid=0 send_seq=38592 receive_seq=38591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.479 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=384195 sysload=0.70 cputime=99.137 memavail=1628908 print_time=3218.926 buffer_time=2.511 print_stall=0 extruder: target=215 temp=214.8 pwm=0.582
Stats 3208.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=1373975 bytes_read=710960 bytes_retransmit=9 bytes_invalid=0 send_seq=38610 receive_seq=38610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=54.5 mcu_temp: temp=40.0 sd_pos=384260 sysload=0.70 cputime=99.190 memavail=1628896 print_time=3219.433 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 3209.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=1375279 bytes_read=711427 bytes_retransmit=9 bytes_invalid=0 send_seq=38640 receive_seq=38640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.392 rpi: temp=54.0 mcu_temp: temp=39.9 sd_pos=384526 sysload=0.70 cputime=99.251 memavail=1629024 print_time=3220.984 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.0 pwm=0.452
Stats 3210.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=1376159 bytes_read=711843 bytes_retransmit=9 bytes_invalid=0 send_seq=38663 receive_seq=38663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=384706 sysload=0.70 cputime=99.305 memavail=1629248 print_time=3221.971 buffer_time=2.554 print_stall=0 extruder: target=215 temp=215.2 pwm=0.452
Stats 3211.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=1376811 bytes_read=712222 bytes_retransmit=9 bytes_invalid=0 send_seq=38682 receive_seq=38682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=55.5 mcu_temp: temp=39.2 sd_pos=384824 sysload=0.70 cputime=99.338 memavail=1629260 print_time=3222.762 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.2 pwm=0.452
Stats 3212.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=1377652 bytes_read=712647 bytes_retransmit=9 bytes_invalid=0 send_seq=38706 receive_seq=38706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=385004 sysload=0.64 cputime=99.393 memavail=1629236 print_time=3223.749 buffer_time=2.328 print_stall=0 extruder: target=215 temp=215.0 pwm=0.599
Stats 3213.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1378284 bytes_read=713047 bytes_retransmit=9 bytes_invalid=0 send_seq=38725 receive_seq=38725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=385093 sysload=0.64 cputime=99.451 memavail=1629508 print_time=3224.458 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.2 pwm=0.545
Stats 3214.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1379063 bytes_read=713419 bytes_retransmit=9 bytes_invalid=0 send_seq=38745 receive_seq=38744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.510 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=385208 sysload=0.64 cputime=99.510 memavail=1629768 print_time=3225.750 buffer_time=2.325 print_stall=0 extruder: target=215 temp=215.4 pwm=0.426
Stats 3215.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1379571 bytes_read=713837 bytes_retransmit=9 bytes_invalid=0 send_seq=38765 receive_seq=38765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.0 mcu_temp: temp=39.4 sd_pos=385271 sysload=0.64 cputime=99.563 memavail=1629768 print_time=3226.643 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.4 pwm=0.512
Stats 3216.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1380627 bytes_read=714283 bytes_retransmit=9 bytes_invalid=0 send_seq=38794 receive_seq=38794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.338 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=385445 sysload=0.64 cputime=99.618 memavail=1629768 print_time=3227.467 buffer_time=2.041 print_stall=0 extruder: target=215 temp=215.7 pwm=0.365
Stats 3217.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000043 bytes_write=1381602 bytes_read=714680 bytes_retransmit=9 bytes_invalid=0 send_seq=38816 receive_seq=38816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=385647 sysload=0.59 cputime=99.672 memavail=1629524 print_time=3228.994 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.5 pwm=0.456
Stats 3218.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1382287 bytes_read=715102 bytes_retransmit=9 bytes_invalid=0 send_seq=38835 receive_seq=38834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=385765 sysload=0.59 cputime=99.728 memavail=1629512 print_time=3229.773 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.5 pwm=0.543
Stats 3219.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1382898 bytes_read=715508 bytes_retransmit=9 bytes_invalid=0 send_seq=38855 receive_seq=38855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=385885 sysload=0.59 cputime=99.785 memavail=1629484 print_time=3230.552 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.6 pwm=0.465
Stats 3220.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1383682 bytes_read=715900 bytes_retransmit=9 bytes_invalid=0 send_seq=38876 receive_seq=38876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.165 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=386064 sysload=0.59 cputime=99.840 memavail=1629772 print_time=3232.034 buffer_time=2.602 print_stall=0 extruder: target=215 temp=215.7 pwm=0.412
Stats 3221.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1384076 bytes_read=716292 bytes_retransmit=9 bytes_invalid=0 send_seq=38891 receive_seq=38891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=386126 sysload=0.59 cputime=99.872 memavail=1629900 print_time=3232.428 buffer_time=1.995 print_stall=0 extruder: target=215 temp=215.7 pwm=0.483
Stats 3222.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1385411 bytes_read=716758 bytes_retransmit=9 bytes_invalid=0 send_seq=38924 receive_seq=38924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=386319 sysload=0.54 cputime=99.934 memavail=1629800 print_time=3233.966 buffer_time=2.531 print_stall=0 extruder: target=215 temp=215.5 pwm=0.478
Stats 3223.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1386049 bytes_read=717155 bytes_retransmit=9 bytes_invalid=0 send_seq=38944 receive_seq=38943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=386409 sysload=0.54 cputime=99.985 memavail=1630120 print_time=3234.673 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.5 pwm=0.535
Stats 3224.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1386558 bytes_read=717578 bytes_retransmit=9 bytes_invalid=0 send_seq=38962 receive_seq=38962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.100 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=386492 sysload=0.54 cputime=100.037 memavail=1630400 print_time=3235.692 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.7 pwm=0.457
Stats 3225.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1387239 bytes_read=717979 bytes_retransmit=9 bytes_invalid=0 send_seq=38982 receive_seq=38982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=386605 sysload=0.54 cputime=100.090 memavail=1630716 print_time=3236.705 buffer_time=2.267 print_stall=0 extruder: target=215 temp=215.6 pwm=0.445
Stats 3226.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1387920 bytes_read=718356 bytes_retransmit=9 bytes_invalid=0 send_seq=39001 receive_seq=39000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.604 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=386723 sysload=0.54 cputime=100.140 memavail=1630712 print_time=3237.764 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.4 pwm=0.508
Stats 3227.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1388825 bytes_read=718798 bytes_retransmit=9 bytes_invalid=0 send_seq=39025 receive_seq=39025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=387157 sysload=0.50 cputime=100.195 memavail=1630932 print_time=3238.465 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.4 pwm=0.508
Stats 3228.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1389731 bytes_read=719224 bytes_retransmit=9 bytes_invalid=0 send_seq=39047 receive_seq=39047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=387836 sysload=0.50 cputime=100.261 memavail=1630704 print_time=3239.601 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.4 pwm=0.508
Stats 3229.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1391022 bytes_read=719646 bytes_retransmit=9 bytes_invalid=0 send_seq=39075 receive_seq=39074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=388738 sysload=0.50 cputime=100.328 memavail=1630716 print_time=3240.698 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.5 pwm=0.419
Stats 3230.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1392046 bytes_read=720108 bytes_retransmit=9 bytes_invalid=0 send_seq=39103 receive_seq=39103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=389266 sysload=0.50 cputime=100.395 memavail=1630456 print_time=3241.633 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.3 pwm=0.530
Stats 3231.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1393404 bytes_read=720564 bytes_retransmit=9 bytes_invalid=0 send_seq=39134 receive_seq=39134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=390096 sysload=0.50 cputime=100.461 memavail=1630428 print_time=3242.654 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.1 pwm=0.590
Stats 3232.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1394025 bytes_read=720951 bytes_retransmit=9 bytes_invalid=0 send_seq=39154 receive_seq=39154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.696 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=390395 sysload=0.46 cputime=100.519 memavail=1629944 print_time=3243.487 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.2 pwm=0.439
Stats 3233.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1394986 bytes_read=721388 bytes_retransmit=9 bytes_invalid=0 send_seq=39176 receive_seq=39175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.394 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=391010 sysload=0.46 cputime=100.582 memavail=1630160 print_time=3244.697 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.1 pwm=0.533
Stats 3234.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1396429 bytes_read=721854 bytes_retransmit=9 bytes_invalid=0 send_seq=39208 receive_seq=39208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=10 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=54.5 mcu_temp: temp=39.5 sd_pos=391940 sysload=0.46 cputime=100.652 memavail=1630472 print_time=3245.783 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 3235.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1397179 bytes_read=722251 bytes_retransmit=9 bytes_invalid=0 send_seq=39230 receive_seq=39230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.169 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=392111 sysload=0.46 cputime=100.704 memavail=1630412 print_time=3246.485 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.2 pwm=0.402
Stats 3236.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1398411 bytes_read=722713 bytes_retransmit=9 bytes_invalid=0 send_seq=39259 receive_seq=39259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=392312 sysload=0.46 cputime=100.765 memavail=1630468 print_time=3247.800 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.1 pwm=0.522
Stats 3237.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1399413 bytes_read=723134 bytes_retransmit=9 bytes_invalid=0 send_seq=39284 receive_seq=39283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=392459 sysload=0.42 cputime=100.820 memavail=1630168 print_time=3248.808 buffer_time=2.354 print_stall=0 extruder: target=215 temp=215.1 pwm=0.532
Stats 3238.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1400409 bytes_read=723566 bytes_retransmit=9 bytes_invalid=0 send_seq=39309 receive_seq=39309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=392575 sysload=0.42 cputime=100.874 memavail=1630432 print_time=3249.908 buffer_time=2.453 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 3239.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1401051 bytes_read=723978 bytes_retransmit=9 bytes_invalid=0 send_seq=39328 receive_seq=39328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.488 rpi: temp=55.0 mcu_temp: temp=39.5 sd_pos=392633 sysload=0.42 cputime=100.921 memavail=1630464 print_time=3250.477 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 3240.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1402069 bytes_read=724419 bytes_retransmit=9 bytes_invalid=0 send_seq=39356 receive_seq=39356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.371 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=392781 sysload=0.42 cputime=100.954 memavail=1629920 print_time=3251.662 buffer_time=2.206 print_stall=0 extruder: target=215 temp=214.9 pwm=0.576
Stats 3241.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1403081 bytes_read=724831 bytes_retransmit=9 bytes_invalid=0 send_seq=39381 receive_seq=39381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.291 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=392898 sysload=0.42 cputime=100.991 memavail=1629928 print_time=3252.849 buffer_time=2.390 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 3242.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=1404142 bytes_read=725283 bytes_retransmit=9 bytes_invalid=0 send_seq=39408 receive_seq=39408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=393073 sysload=0.39 cputime=101.046 memavail=1629948 print_time=3254.048 buffer_time=2.589 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 3243.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1404690 bytes_read=725689 bytes_retransmit=9 bytes_invalid=0 send_seq=39426 receive_seq=39426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=393131 sysload=0.39 cputime=101.098 memavail=1629948 print_time=3254.633 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 3244.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1405686 bytes_read=726106 bytes_retransmit=9 bytes_invalid=0 send_seq=39452 receive_seq=39452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=393248 sysload=0.39 cputime=101.153 memavail=1630136 print_time=3255.775 buffer_time=2.314 print_stall=0 extruder: target=215 temp=214.7 pwm=0.609
Stats 3245.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1406736 bytes_read=726548 bytes_retransmit=9 bytes_invalid=0 send_seq=39478 receive_seq=39477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.713 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=393395 sysload=0.39 cputime=101.208 memavail=1629904 print_time=3256.857 buffer_time=2.396 print_stall=0 extruder: target=215 temp=214.7 pwm=0.539
Stats 3246.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1407668 bytes_read=726979 bytes_retransmit=9 bytes_invalid=0 send_seq=39504 receive_seq=39503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=393513 sysload=0.39 cputime=101.262 memavail=1629876 print_time=3257.837 buffer_time=2.373 print_stall=0 extruder: target=215 temp=214.8 pwm=0.482
Stats 3247.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1408475 bytes_read=727386 bytes_retransmit=9 bytes_invalid=0 send_seq=39527 receive_seq=39527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=393663 sysload=0.36 cputime=101.316 memavail=1630152 print_time=3258.680 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.7 pwm=0.509
Stats 3248.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1409806 bytes_read=727878 bytes_retransmit=9 bytes_invalid=0 send_seq=39559 receive_seq=39559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=394189 sysload=0.36 cputime=101.373 memavail=1630116 print_time=3259.613 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.8 pwm=0.522
Stats 3249.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1410943 bytes_read=728314 bytes_retransmit=9 bytes_invalid=0 send_seq=39586 receive_seq=39586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.129 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=395000 sysload=0.36 cputime=101.434 memavail=1629900 print_time=3260.727 buffer_time=2.260 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 3250.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1411739 bytes_read=728716 bytes_retransmit=9 bytes_invalid=0 send_seq=39609 receive_seq=39609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.543 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=395598 sysload=0.36 cputime=101.472 memavail=1629896 print_time=3261.564 buffer_time=2.097 print_stall=0 extruder: target=215 temp=214.9 pwm=0.439
Stats 3251.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1412949 bytes_read=729177 bytes_retransmit=9 bytes_invalid=0 send_seq=39636 receive_seq=39635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=396377 sysload=0.36 cputime=101.512 memavail=1630172 print_time=3262.733 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 3252.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1413928 bytes_read=729594 bytes_retransmit=9 bytes_invalid=0 send_seq=39662 receive_seq=39661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=397008 sysload=0.33 cputime=101.577 memavail=1630208 print_time=3263.630 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 3253.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1414763 bytes_read=730016 bytes_retransmit=9 bytes_invalid=0 send_seq=39685 receive_seq=39685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.444 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=397493 sysload=0.33 cputime=101.641 memavail=1629704 print_time=3264.481 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 3254.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1415733 bytes_read=730477 bytes_retransmit=9 bytes_invalid=0 send_seq=39711 receive_seq=39711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.170 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=398411 sysload=0.33 cputime=101.711 memavail=1630200 print_time=3265.639 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.8 pwm=0.589
Stats 3255.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1416983 bytes_read=730909 bytes_retransmit=9 bytes_invalid=0 send_seq=39740 receive_seq=39740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.587 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=398974 sysload=0.33 cputime=101.776 memavail=1629696 print_time=3266.896 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 3256.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1417866 bytes_read=731311 bytes_retransmit=9 bytes_invalid=0 send_seq=39763 receive_seq=39763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=39.6 sd_pos=399095 sysload=0.33 cputime=101.831 memavail=1629676 print_time=3267.733 buffer_time=2.258 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 3257.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=1418813 bytes_read=731772 bytes_retransmit=9 bytes_invalid=0 send_seq=39789 receive_seq=39789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=399246 sysload=0.30 cputime=101.888 memavail=1629944 print_time=3268.741 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 3258.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1419781 bytes_read=732194 bytes_retransmit=9 bytes_invalid=0 send_seq=39814 receive_seq=39813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=399396 sysload=0.30 cputime=101.925 memavail=1630144 print_time=3269.845 buffer_time=2.367 print_stall=0 extruder: target=215 temp=214.7 pwm=0.607
Stats 3259.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1420856 bytes_read=732636 bytes_retransmit=9 bytes_invalid=0 send_seq=39842 receive_seq=39841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=54.5 mcu_temp: temp=40.0 sd_pos=399518 sysload=0.30 cputime=101.981 memavail=1630368 print_time=3271.032 buffer_time=2.553 print_stall=0 extruder: target=215 temp=214.7 pwm=0.556
Stats 3260.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1421499 bytes_read=733057 bytes_retransmit=9 bytes_invalid=0 send_seq=39863 receive_seq=39862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=399579 sysload=0.30 cputime=102.033 memavail=1629648 print_time=3271.643 buffer_time=2.163 print_stall=0 extruder: target=215 temp=214.7 pwm=0.553
Stats 3261.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1422507 bytes_read=733479 bytes_retransmit=9 bytes_invalid=0 send_seq=39889 receive_seq=39889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=399699 sysload=0.30 cputime=102.085 memavail=1629596 print_time=3272.896 buffer_time=2.414 print_stall=0 extruder: target=215 temp=214.5 pwm=0.658
Stats 3262.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1423112 bytes_read=733886 bytes_retransmit=9 bytes_invalid=0 send_seq=39910 receive_seq=39910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.464 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=399788 sysload=0.28 cputime=102.117 memavail=1629584 print_time=3273.538 buffer_time=2.055 print_stall=0 extruder: target=215 temp=214.6 pwm=0.540
Stats 3263.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1424204 bytes_read=734352 bytes_retransmit=9 bytes_invalid=0 send_seq=39938 receive_seq=39937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=399938 sysload=0.28 cputime=102.173 memavail=1629608 print_time=3274.773 buffer_time=2.290 print_stall=0 extruder: target=215 temp=214.5 pwm=0.623
Stats 3264.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1425196 bytes_read=734759 bytes_retransmit=9 bytes_invalid=0 send_seq=39962 receive_seq=39961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=400058 sysload=0.28 cputime=102.227 memavail=1629372 print_time=3275.986 buffer_time=2.499 print_stall=0 extruder: target=215 temp=214.3 pwm=0.697
Stats 3265.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1425798 bytes_read=735156 bytes_retransmit=9 bytes_invalid=0 send_seq=39981 receive_seq=39980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=400120 sysload=0.28 cputime=102.278 memavail=1629548 print_time=3276.567 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.6 pwm=0.517
Stats 3266.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1426728 bytes_read=735597 bytes_retransmit=9 bytes_invalid=0 send_seq=40005 receive_seq=40005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=54.5 mcu_temp: temp=39.6 sd_pos=400272 sysload=0.28 cputime=102.331 memavail=1629576 print_time=3277.672 buffer_time=2.184 print_stall=0 extruder: target=215 temp=214.4 pwm=0.673
Stats 3267.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1427618 bytes_read=735989 bytes_retransmit=9 bytes_invalid=0 send_seq=40026 receive_seq=40026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=400391 sysload=0.25 cputime=102.383 memavail=1629560 print_time=3278.670 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.5 pwm=0.571
Stats 3268.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1428547 bytes_read=736426 bytes_retransmit=9 bytes_invalid=0 send_seq=40051 receive_seq=40050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=400536 sysload=0.25 cputime=102.435 memavail=1629560 print_time=3279.536 buffer_time=2.045 print_stall=0 extruder: target=215 temp=214.4 pwm=0.642
Stats 3269.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1430298 bytes_read=736932 bytes_retransmit=9 bytes_invalid=0 send_seq=40089 receive_seq=40088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=401019 sysload=0.25 cputime=102.493 memavail=1629560 print_time=3280.846 buffer_time=2.354 print_stall=0 extruder: target=215 temp=214.5 pwm=0.579
Stats 3270.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1431259 bytes_read=737349 bytes_retransmit=9 bytes_invalid=0 send_seq=40114 receive_seq=40114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.763 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=401157 sysload=0.25 cputime=102.542 memavail=1629572 print_time=3281.694 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.7 pwm=0.439
Stats 3271.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1432002 bytes_read=737738 bytes_retransmit=9 bytes_invalid=0 send_seq=40134 receive_seq=40133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=401266 sysload=0.25 cputime=102.576 memavail=1629316 print_time=3282.772 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.7 pwm=0.516
Stats 3272.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1432553 bytes_read=738137 bytes_retransmit=9 bytes_invalid=0 send_seq=40153 receive_seq=40152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.374 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=401353 sysload=0.23 cputime=102.628 memavail=1629316 print_time=3283.791 buffer_time=2.295 print_stall=0 extruder: target=215 temp=214.7 pwm=0.598
Stats 3273.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1433211 bytes_read=738534 bytes_retransmit=9 bytes_invalid=0 send_seq=40174 receive_seq=40173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=401472 sysload=0.23 cputime=102.682 memavail=1629064 print_time=3284.648 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.9 pwm=0.403
Stats 3274.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1433870 bytes_read=738926 bytes_retransmit=9 bytes_invalid=0 send_seq=40193 receive_seq=40193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.784 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=401559 sysload=0.23 cputime=102.737 memavail=1629060 print_time=3285.585 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.7 pwm=0.564
Stats 3275.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1434610 bytes_read=739341 bytes_retransmit=9 bytes_invalid=0 send_seq=40214 receive_seq=40213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=401673 sysload=0.23 cputime=102.790 memavail=1629316 print_time=3286.865 buffer_time=2.365 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 3276.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1435505 bytes_read=739743 bytes_retransmit=9 bytes_invalid=0 send_seq=40237 receive_seq=40236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=401768 sysload=0.23 cputime=102.842 memavail=1629008 print_time=3287.600 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.2 pwm=0.445
Stats 3277.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1436526 bytes_read=740175 bytes_retransmit=9 bytes_invalid=0 send_seq=40262 receive_seq=40262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.897 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=402004 sysload=0.21 cputime=102.895 memavail=1628984 print_time=3288.923 buffer_time=2.421 print_stall=0 extruder: target=215 temp=215.3 pwm=0.394
Stats 3278.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1437410 bytes_read=740626 bytes_retransmit=9 bytes_invalid=0 send_seq=40286 receive_seq=40286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.736 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=402184 sysload=0.21 cputime=102.929 memavail=1629040 print_time=3289.910 buffer_time=2.406 print_stall=0 extruder: target=215 temp=215.1 pwm=0.570
Stats 3279.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1438168 bytes_read=741028 bytes_retransmit=9 bytes_invalid=0 send_seq=40309 receive_seq=40309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.590 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=402302 sysload=0.21 cputime=102.983 memavail=1629064 print_time=3290.701 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.4 pwm=0.368
Stats 3280.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1439021 bytes_read=741450 bytes_retransmit=9 bytes_invalid=0 send_seq=40333 receive_seq=40333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=402482 sysload=0.21 cputime=103.036 memavail=1629236 print_time=3291.688 buffer_time=2.183 print_stall=0 extruder: target=215 temp=215.2 pwm=0.546
Stats 3281.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1439787 bytes_read=741876 bytes_retransmit=9 bytes_invalid=0 send_seq=40355 receive_seq=40355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.684 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=402601 sysload=0.21 cputime=103.072 memavail=1629180 print_time=3292.670 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.4 pwm=0.497
Stats 3282.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1440364 bytes_read=742258 bytes_retransmit=9 bytes_invalid=0 send_seq=40374 receive_seq=40374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.097 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=402686 sysload=0.20 cputime=103.124 memavail=1628944 print_time=3293.689 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.3 pwm=0.560
Stats 3283.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1440933 bytes_read=742701 bytes_retransmit=9 bytes_invalid=0 send_seq=40394 receive_seq=40394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=402749 sysload=0.20 cputime=103.177 memavail=1629144 print_time=3294.582 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.6 pwm=0.380
Stats 3284.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1442122 bytes_read=743142 bytes_retransmit=9 bytes_invalid=0 send_seq=40422 receive_seq=40422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=402952 sysload=0.20 cputime=103.230 memavail=1629208 print_time=3295.528 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.7 pwm=0.361
Stats 3285.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1443017 bytes_read=743554 bytes_retransmit=9 bytes_invalid=0 send_seq=40447 receive_seq=40447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=403125 sysload=0.20 cputime=103.270 memavail=1629256 print_time=3296.933 buffer_time=2.420 print_stall=0 extruder: target=215 temp=216.1 pwm=0.089
Stats 3286.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1443736 bytes_read=743976 bytes_retransmit=9 bytes_invalid=0 send_seq=40468 receive_seq=40468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=403243 sysload=0.20 cputime=103.323 memavail=1629188 print_time=3297.712 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.6 pwm=0.479
Stats 3287.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1444593 bytes_read=744402 bytes_retransmit=9 bytes_invalid=0 send_seq=40493 receive_seq=40493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=403423 sysload=0.18 cputime=103.379 memavail=1629488 print_time=3298.644 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.5 pwm=0.527
Stats 3288.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1445242 bytes_read=744794 bytes_retransmit=9 bytes_invalid=0 send_seq=40511 receive_seq=40511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.681 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=403542 sysload=0.18 cputime=103.433 memavail=1629252 print_time=3299.973 buffer_time=2.456 print_stall=0 extruder: target=215 temp=215.4 pwm=0.527
Stats 3289.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1445864 bytes_read=745211 bytes_retransmit=9 bytes_invalid=0 send_seq=40531 receive_seq=40531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.051 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=403677 sysload=0.18 cputime=103.489 memavail=1629244 print_time=3300.794 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.3 pwm=0.620
Stats 3290.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1446968 bytes_read=745637 bytes_retransmit=9 bytes_invalid=0 send_seq=40556 receive_seq=40556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=403797 sysload=0.18 cputime=103.543 memavail=1629464 print_time=3301.905 buffer_time=2.384 print_stall=0 extruder: target=215 temp=215.4 pwm=0.475
Stats 3291.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1447573 bytes_read=746019 bytes_retransmit=9 bytes_invalid=0 send_seq=40575 receive_seq=40575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=403887 sysload=0.18 cputime=103.577 memavail=1629524 print_time=3302.612 buffer_time=2.089 print_stall=0 extruder: target=215 temp=215.4 pwm=0.497
Stats 3292.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1448219 bytes_read=746431 bytes_retransmit=9 bytes_invalid=0 send_seq=40594 receive_seq=40594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=403970 sysload=0.17 cputime=103.634 memavail=1629468 print_time=3303.631 buffer_time=2.107 print_stall=0 extruder: target=215 temp=215.5 pwm=0.451
Stats 3293.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1448921 bytes_read=746852 bytes_retransmit=9 bytes_invalid=0 send_seq=40615 receive_seq=40615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=404083 sysload=0.17 cputime=103.690 memavail=1629236 print_time=3304.644 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.3 pwm=0.527
Stats 3294.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1449618 bytes_read=747244 bytes_retransmit=9 bytes_invalid=0 send_seq=40636 receive_seq=40636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=404201 sysload=0.17 cputime=103.743 memavail=1629412 print_time=3305.703 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.4 pwm=0.471
Stats 3295.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1451005 bytes_read=747726 bytes_retransmit=9 bytes_invalid=0 send_seq=40669 receive_seq=40669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=404999 sysload=0.17 cputime=103.805 memavail=1629436 print_time=3306.743 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.1 pwm=0.672
Stats 3296.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1451773 bytes_read=748142 bytes_retransmit=9 bytes_invalid=0 send_seq=40692 receive_seq=40692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=405498 sysload=0.17 cputime=103.865 memavail=1629456 print_time=3307.566 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.2 pwm=0.507
Stats 3297.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1453062 bytes_read=748579 bytes_retransmit=9 bytes_invalid=0 send_seq=40722 receive_seq=40722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=406319 sysload=0.15 cputime=103.931 memavail=1629376 print_time=3308.711 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.1 pwm=0.575
Stats 3298.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1453909 bytes_read=749026 bytes_retransmit=9 bytes_invalid=0 send_seq=40745 receive_seq=40745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=406883 sysload=0.15 cputime=103.993 memavail=1629408 print_time=3309.604 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.5 pwm=0.286
Stats 3299.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1455126 bytes_read=749467 bytes_retransmit=9 bytes_invalid=0 send_seq=40773 receive_seq=40773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=54.9 pwm=0.644 rpi: temp=54.5 mcu_temp: temp=39.7 sd_pos=407799 sysload=0.15 cputime=104.058 memavail=1629116 print_time=3310.776 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.0 pwm=0.618
Stats 3300.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1455974 bytes_read=749879 bytes_retransmit=9 bytes_invalid=0 send_seq=40798 receive_seq=40798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=10 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=408404 sysload=0.15 cputime=104.119 memavail=1629676 print_time=3311.851 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.0 pwm=0.612
Stats 3301.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1456565 bytes_read=750291 bytes_retransmit=9 bytes_invalid=0 send_seq=40817 receive_seq=40817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=408719 sysload=0.15 cputime=104.149 memavail=1629732 print_time=3312.543 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.1 pwm=0.544
Stats 3302.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1457816 bytes_read=750737 bytes_retransmit=9 bytes_invalid=0 send_seq=40846 receive_seq=40846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=409183 sysload=0.14 cputime=104.191 memavail=1629916 print_time=3313.886 buffer_time=2.349 print_stall=0 extruder: target=215 temp=215.1 pwm=0.558
Stats 3303.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1458659 bytes_read=751159 bytes_retransmit=9 bytes_invalid=0 send_seq=40870 receive_seq=40870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=409329 sysload=0.14 cputime=104.247 memavail=1629892 print_time=3314.762 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.577
Stats 3304.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1459568 bytes_read=751606 bytes_retransmit=9 bytes_invalid=0 send_seq=40896 receive_seq=40896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.179 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=409445 sysload=0.14 cputime=104.305 memavail=1629744 print_time=3315.784 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.9 pwm=0.532
Stats 3305.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1460601 bytes_read=752052 bytes_retransmit=9 bytes_invalid=0 send_seq=40925 receive_seq=40925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=409592 sysload=0.14 cputime=104.362 memavail=1629948 print_time=3316.912 buffer_time=2.369 print_stall=0 extruder: target=215 temp=215.0 pwm=0.437
Stats 3306.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1461646 bytes_read=752474 bytes_retransmit=9 bytes_invalid=0 send_seq=40952 receive_seq=40952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.215 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=409710 sysload=0.14 cputime=104.416 memavail=1629924 print_time=3318.106 buffer_time=2.562 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 3307.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=1462278 bytes_read=752896 bytes_retransmit=9 bytes_invalid=0 send_seq=40973 receive_seq=40973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.325 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=409767 sysload=0.13 cputime=104.470 memavail=1629656 print_time=3318.722 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 3308.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1463281 bytes_read=753342 bytes_retransmit=9 bytes_invalid=0 send_seq=40999 receive_seq=40999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.279 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=409883 sysload=0.13 cputime=104.528 memavail=1629968 print_time=3319.969 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 3309.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1463941 bytes_read=753734 bytes_retransmit=9 bytes_invalid=0 send_seq=41020 receive_seq=41020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.496 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=409973 sysload=0.13 cputime=104.582 memavail=1629660 print_time=3320.605 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 3310.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1464955 bytes_read=754186 bytes_retransmit=9 bytes_invalid=0 send_seq=41047 receive_seq=41047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=410150 sysload=0.13 cputime=104.636 memavail=1630444 print_time=3321.818 buffer_time=2.271 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 3311.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1465969 bytes_read=754612 bytes_retransmit=9 bytes_invalid=0 send_seq=41072 receive_seq=41072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=410268 sysload=0.13 cputime=104.690 memavail=1630432 print_time=3323.004 buffer_time=2.454 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 3312.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1466614 bytes_read=754999 bytes_retransmit=9 bytes_invalid=0 send_seq=41092 receive_seq=41092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=410326 sysload=0.12 cputime=104.742 memavail=1630120 print_time=3323.570 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.8 pwm=0.597
Stats 3313.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1467522 bytes_read=755456 bytes_retransmit=9 bytes_invalid=0 send_seq=41117 receive_seq=41117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.3 sd_pos=410471 sysload=0.12 cputime=104.795 memavail=1630188 print_time=3324.653 buffer_time=2.101 print_stall=0 extruder: target=215 temp=214.9 pwm=0.419
Stats 3314.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1468492 bytes_read=755882 bytes_retransmit=9 bytes_invalid=0 send_seq=41142 receive_seq=41142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=410586 sysload=0.12 cputime=104.847 memavail=1630220 print_time=3325.633 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.8 pwm=0.498
Stats 3315.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1469608 bytes_read=756294 bytes_retransmit=9 bytes_invalid=0 send_seq=41168 receive_seq=41167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=410824 sysload=0.12 cputime=104.883 memavail=1629716 print_time=3326.849 buffer_time=2.294 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 3316.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1470880 bytes_read=756771 bytes_retransmit=9 bytes_invalid=0 send_seq=41199 receive_seq=41199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996421 heater_bed: target=55 temp=55.1 pwm=0.107 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=411466 sysload=0.12 cputime=104.945 memavail=1629408 print_time=3327.693 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.6 pwm=0.652
Stats 3317.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=1472001 bytes_read=757212 bytes_retransmit=9 bytes_invalid=0 send_seq=41227 receive_seq=41227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.1 pwm=0.175 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=412219 sysload=0.11 cputime=105.011 memavail=1629432 print_time=3328.815 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.0 pwm=0.440
Stats 3318.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1473064 bytes_read=757639 bytes_retransmit=9 bytes_invalid=0 send_seq=41252 receive_seq=41252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996416 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=412879 sysload=0.11 cputime=105.074 memavail=1629444 print_time=3329.664 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 3319.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1474097 bytes_read=758081 bytes_retransmit=9 bytes_invalid=0 send_seq=41277 receive_seq=41277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=413601 sysload=0.11 cputime=105.138 memavail=1629452 print_time=3330.793 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 3320.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1475246 bytes_read=758517 bytes_retransmit=9 bytes_invalid=0 send_seq=41304 receive_seq=41304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=414506 sysload=0.11 cputime=105.205 memavail=1629176 print_time=3331.872 buffer_time=2.312 print_stall=0 extruder: target=215 temp=215.1 pwm=0.403
Stats 3321.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1475885 bytes_read=758899 bytes_retransmit=9 bytes_invalid=0 send_seq=41323 receive_seq=41323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.1 pwm=0.364 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=414899 sysload=0.11 cputime=105.260 memavail=1628876 print_time=3332.674 buffer_time=2.114 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 3322.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1476663 bytes_read=759321 bytes_retransmit=9 bytes_invalid=0 send_seq=41344 receive_seq=41344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.549 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=415381 sysload=0.10 cputime=105.298 memavail=1629072 print_time=3333.567 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 3323.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1477986 bytes_read=759787 bytes_retransmit=9 bytes_invalid=0 send_seq=41374 receive_seq=41374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=10 freq=71996412 heater_bed: target=55 temp=54.9 pwm=0.803 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=416290 sysload=0.10 cputime=105.366 memavail=1628984 print_time=3334.658 buffer_time=2.094 print_stall=0 extruder: target=215 temp=214.7 pwm=0.598
Stats 3324.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1479129 bytes_read=760209 bytes_retransmit=9 bytes_invalid=0 send_seq=41401 receive_seq=41401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=416589 sysload=0.10 cputime=105.423 memavail=1628836 print_time=3335.775 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.9 pwm=0.422
Stats 3325.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1480089 bytes_read=760661 bytes_retransmit=9 bytes_invalid=0 send_seq=41428 receive_seq=41428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=416771 sysload=0.10 cputime=105.477 memavail=1629080 print_time=3336.690 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.7 pwm=0.525
Stats 3326.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1481035 bytes_read=761092 bytes_retransmit=9 bytes_invalid=0 send_seq=41454 receive_seq=41454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=416922 sysload=0.10 cputime=105.512 memavail=1629332 print_time=3337.693 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.0 pwm=0.395
Stats 3327.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1482029 bytes_read=761509 bytes_retransmit=9 bytes_invalid=0 send_seq=41480 receive_seq=41480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=417072 sysload=0.09 cputime=105.565 memavail=1629012 print_time=3338.796 buffer_time=2.230 print_stall=0 extruder: target=215 temp=214.5 pwm=0.691
Stats 3328.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1483051 bytes_read=761990 bytes_retransmit=9 bytes_invalid=0 send_seq=41507 receive_seq=41507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=417192 sysload=0.09 cputime=105.620 memavail=1629096 print_time=3339.948 buffer_time=2.379 print_stall=0 extruder: target=215 temp=214.8 pwm=0.422
Stats 3329.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1484072 bytes_read=762407 bytes_retransmit=9 bytes_invalid=0 send_seq=41533 receive_seq=41533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.234 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=417342 sysload=0.09 cputime=105.669 memavail=1629348 print_time=3341.141 buffer_time=2.571 print_stall=0 extruder: target=215 temp=214.7 pwm=0.522
Stats 3330.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1484713 bytes_read=762782 bytes_retransmit=9 bytes_invalid=0 send_seq=41552 receive_seq=41551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.304 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=417401 sysload=0.09 cputime=105.700 memavail=1628552 print_time=3341.738 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.7 pwm=0.449
Stats 3331.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1485764 bytes_read=763245 bytes_retransmit=9 bytes_invalid=0 send_seq=41580 receive_seq=41580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.696 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=417552 sysload=0.09 cputime=105.737 memavail=1629008 print_time=3342.950 buffer_time=2.376 print_stall=0 extruder: target=215 temp=214.6 pwm=0.577
Stats 3332.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1486776 bytes_read=763652 bytes_retransmit=9 bytes_invalid=0 send_seq=41606 receive_seq=41606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=417673 sysload=0.16 cputime=105.790 memavail=1628720 print_time=3344.102 buffer_time=2.527 print_stall=0 extruder: target=215 temp=214.4 pwm=0.620
Stats 3333.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1487430 bytes_read=764034 bytes_retransmit=9 bytes_invalid=0 send_seq=41625 receive_seq=41624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.482 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=417735 sysload=0.16 cputime=105.840 memavail=1628728 print_time=3344.667 buffer_time=2.091 print_stall=0 extruder: target=215 temp=214.4 pwm=0.641
Stats 3334.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1488447 bytes_read=764498 bytes_retransmit=9 bytes_invalid=0 send_seq=41652 receive_seq=41652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=417886 sysload=0.16 cputime=105.895 memavail=1628672 print_time=3345.750 buffer_time=2.171 print_stall=0 extruder: target=215 temp=214.4 pwm=0.621
Stats 3335.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1489376 bytes_read=764910 bytes_retransmit=9 bytes_invalid=0 send_seq=41677 receive_seq=41677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=418008 sysload=0.16 cputime=105.949 memavail=1628516 print_time=3346.729 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.5 pwm=0.527
Stats 3336.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1490549 bytes_read=765347 bytes_retransmit=9 bytes_invalid=0 send_seq=41704 receive_seq=41704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=418248 sysload=0.16 cputime=106.006 memavail=1628772 print_time=3347.944 buffer_time=2.365 print_stall=0 extruder: target=215 temp=214.4 pwm=0.658
Stats 3337.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1492449 bytes_read=765868 bytes_retransmit=9 bytes_invalid=0 send_seq=41745 receive_seq=41745 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=418920 sysload=0.23 cputime=106.069 memavail=1629144 print_time=3349.051 buffer_time=2.470 print_stall=0 extruder: target=215 temp=214.5 pwm=0.582
Stats 3338.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1493303 bytes_read=766275 bytes_retransmit=9 bytes_invalid=0 send_seq=41766 receive_seq=41766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.712 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=419493 sysload=0.23 cputime=106.128 memavail=1629076 print_time=3349.796 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.7 pwm=0.484
Stats 3339.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1494134 bytes_read=766687 bytes_retransmit=9 bytes_invalid=0 send_seq=41788 receive_seq=41788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=420004 sysload=0.23 cputime=106.188 memavail=1629544 print_time=3350.653 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.5 pwm=0.659
Stats 3340.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1495430 bytes_read=767153 bytes_retransmit=9 bytes_invalid=0 send_seq=41818 receive_seq=41818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.012 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=421018 sysload=0.23 cputime=106.254 memavail=1629804 print_time=3351.727 buffer_time=2.142 print_stall=0 extruder: target=215 temp=214.9 pwm=0.424
Stats 3341.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1496294 bytes_read=767550 bytes_retransmit=9 bytes_invalid=0 send_seq=41841 receive_seq=41840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=421596 sysload=0.23 cputime=106.294 memavail=1629600 print_time=3352.623 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 3342.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1497609 bytes_read=768028 bytes_retransmit=9 bytes_invalid=0 send_seq=41873 receive_seq=41873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=10 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=422745 sysload=0.21 cputime=106.364 memavail=1629624 print_time=3353.810 buffer_time=2.223 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 3343.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1498270 bytes_read=768464 bytes_retransmit=9 bytes_invalid=0 send_seq=41894 receive_seq=41894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.287 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=423103 sysload=0.21 cputime=106.424 memavail=1629832 print_time=3354.598 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 3344.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1499097 bytes_read=768866 bytes_retransmit=9 bytes_invalid=0 send_seq=41917 receive_seq=41917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.584 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=423785 sysload=0.21 cputime=106.488 memavail=1629828 print_time=3355.716 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 3345.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1500449 bytes_read=769313 bytes_retransmit=9 bytes_invalid=0 send_seq=41946 receive_seq=41946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.849 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=424036 sysload=0.21 cputime=106.544 memavail=1629648 print_time=3356.772 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 3346.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1501321 bytes_read=769739 bytes_retransmit=9 bytes_invalid=0 send_seq=41968 receive_seq=41968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.603 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=424158 sysload=0.21 cputime=106.598 memavail=1629628 print_time=3357.695 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.2 pwm=0.401
Stats 3347.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1502227 bytes_read=770141 bytes_retransmit=9 bytes_invalid=0 send_seq=41991 receive_seq=41991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=424310 sysload=0.20 cputime=106.652 memavail=1629388 print_time=3358.743 buffer_time=2.151 print_stall=0 extruder: target=215 temp=214.9 pwm=0.634
Stats 3348.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1503258 bytes_read=770588 bytes_retransmit=9 bytes_invalid=0 send_seq=42017 receive_seq=42017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.654 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=424463 sysload=0.20 cputime=106.710 memavail=1629640 print_time=3359.894 buffer_time=2.299 print_stall=0 extruder: target=215 temp=215.3 pwm=0.309
Stats 3349.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1504286 bytes_read=771034 bytes_retransmit=9 bytes_invalid=0 send_seq=42043 receive_seq=42043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.367 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=424583 sysload=0.20 cputime=106.767 memavail=1629468 print_time=3361.100 buffer_time=2.505 print_stall=0 extruder: target=215 temp=215.2 pwm=0.365
Stats 3350.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1504920 bytes_read=771426 bytes_retransmit=9 bytes_invalid=0 send_seq=42064 receive_seq=42064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=424675 sysload=0.20 cputime=106.816 memavail=1630164 print_time=3361.723 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.8 pwm=0.603
Stats 3351.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1505931 bytes_read=771843 bytes_retransmit=9 bytes_invalid=0 send_seq=42087 receive_seq=42087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=424796 sysload=0.20 cputime=106.854 memavail=1630568 print_time=3362.975 buffer_time=2.376 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 3352.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1506976 bytes_read=772269 bytes_retransmit=9 bytes_invalid=0 send_seq=42114 receive_seq=42109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=424947 sysload=0.18 cputime=106.911 memavail=1630572 print_time=3364.216 buffer_time=2.616 print_stall=0 extruder: target=215 temp=214.8 pwm=0.625
Stats 3353.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1507607 bytes_read=772696 bytes_retransmit=9 bytes_invalid=0 send_seq=42134 receive_seq=42134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.264 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=425007 sysload=0.18 cputime=106.963 memavail=1630708 print_time=3364.827 buffer_time=2.226 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 3354.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1508643 bytes_read=773123 bytes_retransmit=9 bytes_invalid=0 send_seq=42159 receive_seq=42159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.658 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=425129 sysload=0.18 cputime=107.020 memavail=1630740 print_time=3366.002 buffer_time=2.397 print_stall=0 extruder: target=215 temp=215.3 pwm=0.301
Stats 3355.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1509737 bytes_read=773579 bytes_retransmit=9 bytes_invalid=0 send_seq=42187 receive_seq=42187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=425311 sysload=0.18 cputime=107.075 memavail=1630424 print_time=3367.115 buffer_time=2.509 print_stall=0 extruder: target=215 temp=214.8 pwm=0.669
Stats 3356.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1510272 bytes_read=773956 bytes_retransmit=9 bytes_invalid=0 send_seq=42205 receive_seq=42205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=425370 sysload=0.18 cputime=107.124 memavail=1630416 print_time=3367.627 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.9 pwm=0.602
Stats 3357.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1511441 bytes_read=774408 bytes_retransmit=9 bytes_invalid=0 send_seq=42232 receive_seq=42232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=54.0 mcu_temp: temp=40.9 sd_pos=425578 sysload=0.41 cputime=107.180 memavail=1630440 print_time=3368.996 buffer_time=2.384 print_stall=0 extruder: target=215 temp=214.7 pwm=0.602
Stats 3358.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1512604 bytes_read=774874 bytes_retransmit=9 bytes_invalid=0 send_seq=42262 receive_seq=42262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=426017 sysload=0.41 cputime=107.240 memavail=1630196 print_time=3369.933 buffer_time=2.319 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 3359.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1513550 bytes_read=775281 bytes_retransmit=9 bytes_invalid=0 send_seq=42286 receive_seq=42286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=426155 sysload=0.41 cputime=107.296 memavail=1629940 print_time=3370.718 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.8 pwm=0.540
Stats 3360.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1514245 bytes_read=775698 bytes_retransmit=9 bytes_invalid=0 send_seq=42306 receive_seq=42306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=426264 sysload=0.41 cputime=107.352 memavail=1629436 print_time=3371.796 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.5 pwm=0.745
Stats 3361.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1514830 bytes_read=776099 bytes_retransmit=9 bytes_invalid=0 send_seq=42326 receive_seq=42326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.049 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=426351 sysload=0.41 cputime=107.387 memavail=1629184 print_time=3372.815 buffer_time=2.192 print_stall=0 extruder: target=215 temp=214.9 pwm=0.444
Stats 3362.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1515430 bytes_read=776471 bytes_retransmit=9 bytes_invalid=0 send_seq=42343 receive_seq=42343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.180 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=426470 sysload=0.45 cputime=107.441 memavail=1629428 print_time=3373.672 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.8 pwm=0.532
Stats 3363.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1516129 bytes_read=776908 bytes_retransmit=9 bytes_invalid=0 send_seq=42364 receive_seq=42364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=426586 sysload=0.45 cputime=107.498 memavail=1629440 print_time=3374.963 buffer_time=2.334 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 3364.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1516763 bytes_read=777309 bytes_retransmit=9 bytes_invalid=0 send_seq=42385 receive_seq=42384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.568 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=426671 sysload=0.45 cputime=107.549 memavail=1629440 print_time=3375.889 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.2 pwm=0.448
Stats 3365.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1517976 bytes_read=777736 bytes_retransmit=9 bytes_invalid=0 send_seq=42412 receive_seq=42412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=426883 sysload=0.45 cputime=107.587 memavail=1629184 print_time=3377.156 buffer_time=2.520 print_stall=0 extruder: target=215 temp=215.1 pwm=0.551
Stats 3366.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1518739 bytes_read=778168 bytes_retransmit=9 bytes_invalid=0 send_seq=42436 receive_seq=42435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=427002 sysload=0.45 cputime=107.638 memavail=1629188 print_time=3377.947 buffer_time=2.310 print_stall=0 extruder: target=215 temp=215.1 pwm=0.558
Stats 3367.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1519600 bytes_read=778594 bytes_retransmit=9 bytes_invalid=0 send_seq=42460 receive_seq=42460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.216 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=427182 sysload=0.42 cputime=107.672 memavail=1629244 print_time=3378.934 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.2 pwm=0.493
Stats 3368.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1520331 bytes_read=779011 bytes_retransmit=9 bytes_invalid=0 send_seq=42483 receive_seq=42483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=427300 sysload=0.42 cputime=107.727 memavail=1629488 print_time=3379.725 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.3 pwm=0.456
Stats 3369.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1521210 bytes_read=779453 bytes_retransmit=9 bytes_invalid=0 send_seq=42508 receive_seq=42508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.442 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=427480 sysload=0.42 cputime=107.786 memavail=1629760 print_time=3380.712 buffer_time=2.068 print_stall=0 extruder: target=215 temp=215.3 pwm=0.503
Stats 3370.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1521945 bytes_read=779854 bytes_retransmit=9 bytes_invalid=0 send_seq=42528 receive_seq=42528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=427599 sysload=0.42 cputime=107.843 memavail=1629256 print_time=3381.694 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.4 pwm=0.480
Stats 3371.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1522535 bytes_read=780231 bytes_retransmit=9 bytes_invalid=0 send_seq=42546 receive_seq=42546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=427684 sysload=0.42 cputime=107.877 memavail=1629260 print_time=3382.713 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.6 pwm=0.371
Stats 3372.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000044 bytes_write=1523650 bytes_read=780678 bytes_retransmit=9 bytes_invalid=0 send_seq=42572 receive_seq=42572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=427834 sysload=0.38 cputime=107.933 memavail=1629504 print_time=3384.236 buffer_time=2.589 print_stall=0 extruder: target=215 temp=215.5 pwm=0.540
Stats 3373.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1524455 bytes_read=781114 bytes_retransmit=9 bytes_invalid=0 send_seq=42596 receive_seq=42596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=428008 sysload=0.38 cputime=107.991 memavail=1629248 print_time=3385.178 buffer_time=2.528 print_stall=0 extruder: target=215 temp=215.5 pwm=0.525
Stats 3374.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1525122 bytes_read=781511 bytes_retransmit=9 bytes_invalid=0 send_seq=42618 receive_seq=42618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=428123 sysload=0.38 cputime=108.047 memavail=1629016 print_time=3385.957 buffer_time=2.307 print_stall=0 extruder: target=215 temp=215.7 pwm=0.468
Stats 3375.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1525822 bytes_read=781938 bytes_retransmit=9 bytes_invalid=0 send_seq=42640 receive_seq=42640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.201 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=428241 sysload=0.38 cputime=108.103 memavail=1629512 print_time=3386.736 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.4 pwm=0.570
Stats 3376.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1526660 bytes_read=782359 bytes_retransmit=9 bytes_invalid=0 send_seq=42664 receive_seq=42664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=428421 sysload=0.38 cputime=108.162 memavail=1629512 print_time=3387.668 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.6 pwm=0.487
Stats 3377.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=1527354 bytes_read=782756 bytes_retransmit=9 bytes_invalid=0 send_seq=42686 receive_seq=42686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.162 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=428540 sysload=0.51 cputime=108.221 memavail=1629244 print_time=3388.997 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.8 pwm=0.314
Stats 3378.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1527965 bytes_read=783178 bytes_retransmit=9 bytes_invalid=0 send_seq=42704 receive_seq=42704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=54.5 mcu_temp: temp=41.4 sd_pos=428675 sysload=0.51 cputime=108.278 memavail=1629284 print_time=3389.818 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.6 pwm=0.403
Stats 3379.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1529080 bytes_read=783614 bytes_retransmit=9 bytes_invalid=0 send_seq=42731 receive_seq=42731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=428795 sysload=0.51 cputime=108.336 memavail=1629256 print_time=3390.929 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.7 pwm=0.352
Stats 3380.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1529774 bytes_read=784006 bytes_retransmit=9 bytes_invalid=0 send_seq=42752 receive_seq=42752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=428914 sysload=0.51 cputime=108.393 memavail=1629560 print_time=3391.990 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.3 pwm=0.634
Stats 3381.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1530319 bytes_read=784413 bytes_retransmit=9 bytes_invalid=0 send_seq=42770 receive_seq=42770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=428968 sysload=0.51 cputime=108.445 memavail=1629528 print_time=3392.655 buffer_time=1.997 print_stall=0 extruder: target=215 temp=215.4 pwm=0.556
Stats 3382.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=1531029 bytes_read=784819 bytes_retransmit=9 bytes_invalid=0 send_seq=42791 receive_seq=42791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.050 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=429081 sysload=0.47 cputime=108.504 memavail=1629212 print_time=3393.668 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.1 pwm=0.687
Stats 3383.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=1531715 bytes_read=785226 bytes_retransmit=9 bytes_invalid=0 send_seq=42812 receive_seq=42812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=429199 sysload=0.47 cputime=108.566 memavail=1629728 print_time=3394.727 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.3 pwm=0.496
Stats 3384.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=1533019 bytes_read=785708 bytes_retransmit=9 bytes_invalid=0 send_seq=42845 receive_seq=42845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=429821 sysload=0.47 cputime=108.629 memavail=1629728 print_time=3395.824 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.3 pwm=0.479
Stats 3385.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=1534421 bytes_read=786159 bytes_retransmit=9 bytes_invalid=0 send_seq=42875 receive_seq=42875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.411 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=430615 sysload=0.47 cputime=108.703 memavail=1629384 print_time=3396.853 buffer_time=2.188 print_stall=0 extruder: target=215 temp=215.0 pwm=0.666
Stats 3386.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=1535427 bytes_read=786576 bytes_retransmit=9 bytes_invalid=0 send_seq=42901 receive_seq=42901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.481 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=431237 sysload=0.47 cputime=108.768 memavail=1629160 print_time=3397.673 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.2 pwm=0.556
Stats 3387.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=1536567 bytes_read=787037 bytes_retransmit=9 bytes_invalid=0 send_seq=42928 receive_seq=42927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=49 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=432084 sysload=0.51 cputime=108.839 memavail=1629160 print_time=3398.909 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.1 pwm=0.594
Stats 3388.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000069 bytes_write=1537455 bytes_read=787459 bytes_retransmit=9 bytes_invalid=0 send_seq=42951 receive_seq=42951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.141 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=432597 sysload=0.51 cputime=108.906 memavail=1629176 print_time=3399.710 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.2 pwm=0.483
Stats 3389.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000069 bytes_write=1538571 bytes_read=787881 bytes_retransmit=9 bytes_invalid=0 send_seq=42978 receive_seq=42978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=10 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.184 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=433617 sysload=0.51 cputime=108.982 memavail=1629160 print_time=3400.818 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 3390.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000069 bytes_write=1539397 bytes_read=788313 bytes_retransmit=9 bytes_invalid=0 send_seq=43000 receive_seq=43000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=434076 sysload=0.51 cputime=109.044 memavail=1629636 print_time=3401.951 buffer_time=2.279 print_stall=0 extruder: target=215 temp=214.9 pwm=0.627
Stats 3391.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000069 bytes_write=1540471 bytes_read=788714 bytes_retransmit=9 bytes_invalid=0 send_seq=43025 receive_seq=43025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.685 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=434511 sysload=0.51 cputime=109.107 memavail=1629684 print_time=3402.894 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 3392.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000069 bytes_write=1541328 bytes_read=789106 bytes_retransmit=9 bytes_invalid=0 send_seq=43048 receive_seq=43048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=434715 sysload=0.47 cputime=109.167 memavail=1629652 print_time=3403.718 buffer_time=2.043 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 3393.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1542191 bytes_read=789559 bytes_retransmit=9 bytes_invalid=0 send_seq=43072 receive_seq=43072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=434832 sysload=0.47 cputime=109.226 memavail=1629148 print_time=3404.722 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 3394.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1543203 bytes_read=789975 bytes_retransmit=9 bytes_invalid=0 send_seq=43098 receive_seq=43098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=434977 sysload=0.47 cputime=109.288 memavail=1629444 print_time=3405.829 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 3395.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1544264 bytes_read=790412 bytes_retransmit=9 bytes_invalid=0 send_seq=43125 receive_seq=43125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=435095 sysload=0.47 cputime=109.349 memavail=1629436 print_time=3407.014 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 3396.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1545277 bytes_read=790858 bytes_retransmit=9 bytes_invalid=0 send_seq=43151 receive_seq=43151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=435266 sysload=0.47 cputime=109.407 memavail=1629684 print_time=3408.246 buffer_time=2.564 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 3397.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1545934 bytes_read=791250 bytes_retransmit=9 bytes_invalid=0 send_seq=43172 receive_seq=43172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=54.0 mcu_temp: temp=39.7 sd_pos=435326 sysload=0.43 cputime=109.466 memavail=1629948 print_time=3408.874 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 3398.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1546982 bytes_read=791702 bytes_retransmit=9 bytes_invalid=0 send_seq=43199 receive_seq=43199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=435444 sysload=0.43 cputime=109.531 memavail=1630196 print_time=3410.126 buffer_time=2.438 print_stall=0 extruder: target=215 temp=214.9 pwm=0.532
Stats 3399.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1547705 bytes_read=792149 bytes_retransmit=9 bytes_invalid=0 send_seq=43223 receive_seq=43223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=435531 sysload=0.43 cputime=109.593 memavail=1630224 print_time=3410.744 buffer_time=2.057 print_stall=0 extruder: target=215 temp=214.9 pwm=0.591
Stats 3400.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1548686 bytes_read=792566 bytes_retransmit=9 bytes_invalid=0 send_seq=43249 receive_seq=43249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=435678 sysload=0.43 cputime=109.653 memavail=1629936 print_time=3411.953 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.8 pwm=0.602
Stats 3401.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1549704 bytes_read=793003 bytes_retransmit=9 bytes_invalid=0 send_seq=43276 receive_seq=43276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=435795 sysload=0.43 cputime=109.712 memavail=1629664 print_time=3413.094 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.8 pwm=0.582
Stats 3402.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1550712 bytes_read=793454 bytes_retransmit=9 bytes_invalid=0 send_seq=43303 receive_seq=43303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=435909 sysload=0.40 cputime=109.769 memavail=1629644 print_time=3414.154 buffer_time=2.462 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 3403.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1551629 bytes_read=793876 bytes_retransmit=9 bytes_invalid=0 send_seq=43327 receive_seq=43327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.477 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=436056 sysload=0.40 cputime=109.803 memavail=1629620 print_time=3415.116 buffer_time=2.423 print_stall=0 extruder: target=215 temp=215.0 pwm=0.407
Stats 3404.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1552477 bytes_read=794288 bytes_retransmit=9 bytes_invalid=0 send_seq=43349 receive_seq=43349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.083 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=436168 sysload=0.40 cputime=109.840 memavail=1629360 print_time=3415.876 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.8 pwm=0.564
Stats 3405.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1553948 bytes_read=794774 bytes_retransmit=9 bytes_invalid=0 send_seq=43383 receive_seq=43383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=436916 sysload=0.40 cputime=109.910 memavail=1629368 print_time=3416.998 buffer_time=2.302 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 3406.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1554838 bytes_read=795171 bytes_retransmit=9 bytes_invalid=0 send_seq=43405 receive_seq=43405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.472 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=437539 sysload=0.40 cputime=109.976 memavail=1629124 print_time=3417.876 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.8 pwm=0.486
Stats 3407.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1555896 bytes_read=795603 bytes_retransmit=9 bytes_invalid=0 send_seq=43431 receive_seq=43431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.517 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=438096 sysload=0.45 cputime=110.044 memavail=1629152 print_time=3418.786 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.8 pwm=0.546
Stats 3408.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1556966 bytes_read=796059 bytes_retransmit=9 bytes_invalid=0 send_seq=43456 receive_seq=43456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=438922 sysload=0.45 cputime=110.117 memavail=1629056 print_time=3419.923 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.502
Stats 3409.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1557913 bytes_read=796471 bytes_retransmit=9 bytes_invalid=0 send_seq=43481 receive_seq=43481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.693 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=439460 sysload=0.45 cputime=110.187 memavail=1629272 print_time=3420.744 buffer_time=2.040 print_stall=0 extruder: target=215 temp=214.9 pwm=0.588
Stats 3410.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1558765 bytes_read=796883 bytes_retransmit=9 bytes_invalid=0 send_seq=43503 receive_seq=43503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.413 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=440041 sysload=0.45 cputime=110.251 memavail=1629280 print_time=3422.031 buffer_time=2.328 print_stall=0 extruder: target=215 temp=215.0 pwm=0.514
Stats 3411.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1559684 bytes_read=797319 bytes_retransmit=9 bytes_invalid=0 send_seq=43527 receive_seq=43527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=10 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=440906 sysload=0.45 cputime=110.298 memavail=1628752 print_time=3422.829 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.1 pwm=0.519
Stats 3412.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1560776 bytes_read=797741 bytes_retransmit=9 bytes_invalid=0 send_seq=43554 receive_seq=43554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=441280 sysload=0.41 cputime=110.356 memavail=1628724 print_time=3423.752 buffer_time=2.047 print_stall=0 extruder: target=215 temp=214.9 pwm=0.588
Stats 3413.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1561888 bytes_read=798188 bytes_retransmit=9 bytes_invalid=0 send_seq=43580 receive_seq=43580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.467 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=441492 sysload=0.41 cputime=110.392 memavail=1629204 print_time=3424.933 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 3414.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1562826 bytes_read=798629 bytes_retransmit=9 bytes_invalid=0 send_seq=43605 receive_seq=43605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.531 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=441612 sysload=0.41 cputime=110.451 memavail=1629264 print_time=3425.912 buffer_time=2.203 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 3415.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1563749 bytes_read=799031 bytes_retransmit=9 bytes_invalid=0 send_seq=43628 receive_seq=43628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=441765 sysload=0.41 cputime=110.512 memavail=1628980 print_time=3426.997 buffer_time=2.286 print_stall=0 extruder: target=215 temp=214.7 pwm=0.576
Stats 3416.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1564725 bytes_read=799468 bytes_retransmit=9 bytes_invalid=0 send_seq=43652 receive_seq=43652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=55.5 mcu_temp: temp=39.7 sd_pos=441886 sysload=0.41 cputime=110.571 memavail=1629544 print_time=3428.140 buffer_time=2.428 print_stall=0 extruder: target=215 temp=214.8 pwm=0.522
Stats 3417.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1565365 bytes_read=799864 bytes_retransmit=9 bytes_invalid=0 send_seq=43671 receive_seq=43671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=441979 sysload=0.38 cputime=110.626 memavail=1629308 print_time=3428.732 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.5 pwm=0.714
Stats 3418.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1566362 bytes_read=800296 bytes_retransmit=9 bytes_invalid=0 send_seq=43697 receive_seq=43697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=442098 sysload=0.38 cputime=110.685 memavail=1629340 print_time=3429.927 buffer_time=2.212 print_stall=0 extruder: target=215 temp=214.7 pwm=0.549
Stats 3419.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1567384 bytes_read=800743 bytes_retransmit=9 bytes_invalid=0 send_seq=43723 receive_seq=43723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.054 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=442249 sysload=0.38 cputime=110.744 memavail=1629284 print_time=3431.122 buffer_time=2.406 print_stall=0 extruder: target=215 temp=214.6 pwm=0.624
Stats 3420.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1568038 bytes_read=801144 bytes_retransmit=9 bytes_invalid=0 send_seq=43743 receive_seq=43743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=442308 sysload=0.38 cputime=110.801 memavail=1629236 print_time=3431.716 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.6 pwm=0.601
Stats 3421.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1569050 bytes_read=801561 bytes_retransmit=9 bytes_invalid=0 send_seq=43769 receive_seq=43769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.512 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=442427 sysload=0.38 cputime=110.858 memavail=1629592 print_time=3432.867 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.6 pwm=0.528
Stats 3422.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1570004 bytes_read=801993 bytes_retransmit=9 bytes_invalid=0 send_seq=43792 receive_seq=43792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=442638 sysload=0.35 cputime=110.921 memavail=1629620 print_time=3433.972 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.7 pwm=0.528
Stats 3423.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1570981 bytes_read=802439 bytes_retransmit=9 bytes_invalid=0 send_seq=43818 receive_seq=43818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.113 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=442819 sysload=0.35 cputime=110.982 memavail=1630008 print_time=3434.975 buffer_time=2.255 print_stall=0 extruder: target=215 temp=214.5 pwm=0.565
Stats 3424.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1571968 bytes_read=802851 bytes_retransmit=9 bytes_invalid=0 send_seq=43843 receive_seq=43843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=442972 sysload=0.35 cputime=111.042 memavail=1630256 print_time=3435.904 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.5 pwm=0.564
Stats 3425.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1573070 bytes_read=803303 bytes_retransmit=9 bytes_invalid=0 send_seq=43870 receive_seq=43870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.246 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=443218 sysload=0.35 cputime=111.108 memavail=1629772 print_time=3437.001 buffer_time=2.278 print_stall=0 extruder: target=215 temp=214.5 pwm=0.568
Stats 3426.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1574543 bytes_read=803774 bytes_retransmit=9 bytes_invalid=0 send_seq=43904 receive_seq=43904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.473 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=443721 sysload=0.35 cputime=111.173 memavail=1629768 print_time=3437.881 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.6 pwm=0.527
Stats 3427.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000062 bytes_write=1575551 bytes_read=804186 bytes_retransmit=9 bytes_invalid=0 send_seq=43929 receive_seq=43929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=443806 sysload=0.40 cputime=111.229 memavail=1629772 print_time=3438.769 buffer_time=2.045 print_stall=0 extruder: target=215 temp=214.8 pwm=0.413
Stats 3428.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1576211 bytes_read=804608 bytes_retransmit=9 bytes_invalid=0 send_seq=43948 receive_seq=43947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=443917 sysload=0.40 cputime=111.264 memavail=1629536 print_time=3440.061 buffer_time=2.337 print_stall=0 extruder: target=215 temp=214.7 pwm=0.512
Stats 3429.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1576646 bytes_read=804994 bytes_retransmit=9 bytes_invalid=0 send_seq=43964 receive_seq=43964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.092 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=443975 sysload=0.40 cputime=111.296 memavail=1629252 print_time=3440.725 buffer_time=1.998 print_stall=0 extruder: target=215 temp=214.8 pwm=0.512
Stats 3430.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1577378 bytes_read=805381 bytes_retransmit=9 bytes_invalid=0 send_seq=43984 receive_seq=43984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=444124 sysload=0.40 cputime=111.350 memavail=1629264 print_time=3441.855 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.7 pwm=0.550
Stats 3431.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1577918 bytes_read=805788 bytes_retransmit=9 bytes_invalid=0 send_seq=44002 receive_seq=44002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=444210 sysload=0.40 cputime=111.387 memavail=1629040 print_time=3442.874 buffer_time=2.142 print_stall=0 extruder: target=215 temp=215.0 pwm=0.365
Stats 3432.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000057 bytes_write=1578530 bytes_read=806184 bytes_retransmit=9 bytes_invalid=0 send_seq=44021 receive_seq=44021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=444295 sysload=0.37 cputime=111.441 memavail=1629024 print_time=3443.799 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 3433.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1579741 bytes_read=806631 bytes_retransmit=9 bytes_invalid=0 send_seq=44050 receive_seq=44050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=444507 sysload=0.37 cputime=111.504 memavail=1629040 print_time=3445.067 buffer_time=2.332 print_stall=0 extruder: target=215 temp=214.8 pwm=0.609
Stats 3434.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1580496 bytes_read=807068 bytes_retransmit=9 bytes_invalid=0 send_seq=44074 receive_seq=44074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=444626 sysload=0.37 cputime=111.560 memavail=1629040 print_time=3445.857 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.0 pwm=0.582
Stats 3435.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1581354 bytes_read=807494 bytes_retransmit=9 bytes_invalid=0 send_seq=44099 receive_seq=44099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.809 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=444806 sysload=0.37 cputime=111.620 memavail=1629100 print_time=3446.845 buffer_time=2.109 print_stall=0 extruder: target=215 temp=214.8 pwm=0.703
Stats 3436.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1582226 bytes_read=807901 bytes_retransmit=9 bytes_invalid=0 send_seq=44124 receive_seq=44123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=444954 sysload=0.37 cputime=111.677 memavail=1628880 print_time=3447.801 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.1 pwm=0.513
Stats 3437.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1583242 bytes_read=808358 bytes_retransmit=9 bytes_invalid=0 send_seq=44151 receive_seq=44151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.231 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=445163 sysload=0.34 cputime=111.735 memavail=1629064 print_time=3448.978 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.3 pwm=0.406
Stats 3438.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1583831 bytes_read=808764 bytes_retransmit=9 bytes_invalid=0 send_seq=44169 receive_seq=44169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=445251 sysload=0.34 cputime=111.794 memavail=1628928 print_time=3449.996 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.2 pwm=0.493
Stats 3439.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1584598 bytes_read=809156 bytes_retransmit=9 bytes_invalid=0 send_seq=44190 receive_seq=44190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.599 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=445371 sysload=0.34 cputime=111.850 memavail=1628832 print_time=3451.517 buffer_time=2.774 print_stall=0 extruder: target=215 temp=215.2 pwm=0.477
Stats 3440.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1585436 bytes_read=809588 bytes_retransmit=9 bytes_invalid=0 send_seq=44213 receive_seq=44213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=445458 sysload=0.34 cputime=111.905 memavail=1628828 print_time=3452.147 buffer_time=2.404 print_stall=0 extruder: target=215 temp=215.5 pwm=0.347
Stats 3441.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1586279 bytes_read=809999 bytes_retransmit=9 bytes_invalid=0 send_seq=44235 receive_seq=44235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=445632 sysload=0.34 cputime=111.944 memavail=1629104 print_time=3453.088 buffer_time=2.344 print_stall=0 extruder: target=215 temp=215.6 pwm=0.354
Stats 3442.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1586921 bytes_read=810386 bytes_retransmit=9 bytes_invalid=0 send_seq=44255 receive_seq=44255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.058 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=445747 sysload=0.31 cputime=112.001 memavail=1629372 print_time=3453.867 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.5 pwm=0.515
Stats 3443.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1587962 bytes_read=810853 bytes_retransmit=9 bytes_invalid=0 send_seq=44282 receive_seq=44282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.705 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=445985 sysload=0.31 cputime=112.061 memavail=1629108 print_time=3455.425 buffer_time=2.678 print_stall=0 extruder: target=215 temp=215.5 pwm=0.451
Stats 3444.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1588591 bytes_read=811249 bytes_retransmit=9 bytes_invalid=0 send_seq=44301 receive_seq=44301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.462 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=446104 sysload=0.31 cputime=112.118 memavail=1629116 print_time=3456.243 buffer_time=2.494 print_stall=0 extruder: target=215 temp=215.4 pwm=0.532
Stats 3445.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1589107 bytes_read=811636 bytes_retransmit=9 bytes_invalid=0 send_seq=44321 receive_seq=44321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=446164 sysload=0.31 cputime=112.172 memavail=1629364 print_time=3456.908 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.8 pwm=0.267
Stats 3446.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1590190 bytes_read=812098 bytes_retransmit=9 bytes_invalid=0 send_seq=44350 receive_seq=44350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=446329 sysload=0.31 cputime=112.212 memavail=1629088 print_time=3458.037 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.6 pwm=0.492
Stats 3447.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1590799 bytes_read=812484 bytes_retransmit=9 bytes_invalid=0 send_seq=44367 receive_seq=44367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.253 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=446419 sysload=0.29 cputime=112.264 memavail=1629312 print_time=3458.839 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.5 pwm=0.492
Stats 3448.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1591436 bytes_read=812876 bytes_retransmit=9 bytes_invalid=0 send_seq=44385 receive_seq=44385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=446538 sysload=0.29 cputime=112.322 memavail=1629640 print_time=3459.901 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.6 pwm=0.406
Stats 3449.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1592134 bytes_read=813286 bytes_retransmit=9 bytes_invalid=0 send_seq=44404 receive_seq=44404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.168 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=446649 sysload=0.29 cputime=112.379 memavail=1630128 print_time=3461.212 buffer_time=2.454 print_stall=0 extruder: target=215 temp=215.4 pwm=0.500
Stats 3450.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1592837 bytes_read=813687 bytes_retransmit=9 bytes_invalid=0 send_seq=44426 receive_seq=44426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=446764 sysload=0.29 cputime=112.433 memavail=1630124 print_time=3462.243 buffer_time=2.485 print_stall=0 extruder: target=215 temp=215.5 pwm=0.455
Stats 3451.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1594055 bytes_read=814109 bytes_retransmit=9 bytes_invalid=0 send_seq=44455 receive_seq=44455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=55.0 mcu_temp: temp=39.6 sd_pos=447268 sysload=0.29 cputime=112.473 memavail=1629876 print_time=3463.356 buffer_time=2.594 print_stall=0 extruder: target=215 temp=215.2 pwm=0.572
Stats 3452.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1594750 bytes_read=814524 bytes_retransmit=9 bytes_invalid=0 send_seq=44477 receive_seq=44477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=447657 sysload=0.26 cputime=112.531 memavail=1629648 print_time=3463.959 buffer_time=2.197 print_stall=0 extruder: target=215 temp=215.4 pwm=0.514
Stats 3453.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1595903 bytes_read=814973 bytes_retransmit=9 bytes_invalid=0 send_seq=44505 receive_seq=44505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.668 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=448531 sysload=0.26 cputime=112.604 memavail=1629632 print_time=3465.113 buffer_time=2.349 print_stall=0 extruder: target=215 temp=215.4 pwm=0.496
Stats 3454.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1596951 bytes_read=815385 bytes_retransmit=9 bytes_invalid=0 send_seq=44530 receive_seq=44530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=449219 sysload=0.26 cputime=112.668 memavail=1629880 print_time=3466.081 buffer_time=2.316 print_stall=0 extruder: target=215 temp=215.2 pwm=0.622
Stats 3455.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1597742 bytes_read=815807 bytes_retransmit=9 bytes_invalid=0 send_seq=44551 receive_seq=44551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=449830 sysload=0.26 cputime=112.731 memavail=1630132 print_time=3466.799 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.2 pwm=0.429
Stats 3456.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1598812 bytes_read=816248 bytes_retransmit=9 bytes_invalid=0 send_seq=44579 receive_seq=44579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=450494 sysload=0.26 cputime=112.797 memavail=1629880 print_time=3467.939 buffer_time=2.174 print_stall=0 extruder: target=215 temp=215.1 pwm=0.581
Stats 3457.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=1599864 bytes_read=816681 bytes_retransmit=9 bytes_invalid=0 send_seq=44606 receive_seq=44606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.536 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=451445 sysload=0.24 cputime=112.867 memavail=1629628 print_time=3468.985 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.1 pwm=0.518
Stats 3458.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1600612 bytes_read=817128 bytes_retransmit=9 bytes_invalid=0 send_seq=44629 receive_seq=44629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=451793 sysload=0.24 cputime=112.928 memavail=1629628 print_time=3469.884 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 3459.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1601907 bytes_read=817579 bytes_retransmit=9 bytes_invalid=0 send_seq=44659 receive_seq=44659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=452226 sysload=0.24 cputime=112.991 memavail=1630200 print_time=3471.023 buffer_time=2.255 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 3460.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1602766 bytes_read=817986 bytes_retransmit=9 bytes_invalid=0 send_seq=44683 receive_seq=44683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=452375 sysload=0.24 cputime=113.047 memavail=1629936 print_time=3471.873 buffer_time=2.104 print_stall=0 extruder: target=215 temp=214.7 pwm=0.628
Stats 3461.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1603666 bytes_read=818432 bytes_retransmit=9 bytes_invalid=0 send_seq=44706 receive_seq=44706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.302 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=452489 sysload=0.24 cputime=113.105 memavail=1629952 print_time=3472.852 buffer_time=2.081 print_stall=0 extruder: target=215 temp=214.8 pwm=0.524
Stats 3462.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1604661 bytes_read=818844 bytes_retransmit=9 bytes_invalid=0 send_seq=44731 receive_seq=44731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=452663 sysload=0.22 cputime=113.162 memavail=1629952 print_time=3473.937 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.0 pwm=0.408
Stats 3463.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1605694 bytes_read=819276 bytes_retransmit=9 bytes_invalid=0 send_seq=44757 receive_seq=44757 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.723 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=452780 sysload=0.22 cputime=113.220 memavail=1629948 print_time=3475.092 buffer_time=2.319 print_stall=0 extruder: target=215 temp=214.7 pwm=0.623
Stats 3464.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1606746 bytes_read=819747 bytes_retransmit=9 bytes_invalid=0 send_seq=44785 receive_seq=44785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=452955 sysload=0.22 cputime=113.278 memavail=1629768 print_time=3476.301 buffer_time=2.527 print_stall=0 extruder: target=215 temp=214.7 pwm=0.587
Stats 3465.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1607370 bytes_read=820139 bytes_retransmit=9 bytes_invalid=0 send_seq=44806 receive_seq=44806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.003 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=453013 sysload=0.22 cputime=113.330 memavail=1630264 print_time=3476.916 buffer_time=2.141 print_stall=0 extruder: target=215 temp=214.7 pwm=0.553
Stats 3466.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1608420 bytes_read=820576 bytes_retransmit=9 bytes_invalid=0 send_seq=44833 receive_seq=44833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=9 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=453188 sysload=0.22 cputime=113.390 memavail=1630240 print_time=3478.155 buffer_time=2.376 print_stall=0 extruder: target=215 temp=214.6 pwm=0.582
Stats 3467.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1609382 bytes_read=821012 bytes_retransmit=9 bytes_invalid=0 send_seq=44857 receive_seq=44857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.615 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=453305 sysload=0.20 cputime=113.448 memavail=1630304 print_time=3479.390 buffer_time=2.610 print_stall=0 extruder: target=215 temp=214.7 pwm=0.525
Stats 3468.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1610085 bytes_read=821414 bytes_retransmit=9 bytes_invalid=0 send_seq=44877 receive_seq=44877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=453364 sysload=0.20 cputime=113.504 memavail=1630180 print_time=3479.993 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.7 pwm=0.545
Stats 3469.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1611117 bytes_read=821841 bytes_retransmit=9 bytes_invalid=0 send_seq=44902 receive_seq=44902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=453511 sysload=0.20 cputime=113.562 memavail=1630020 print_time=3481.161 buffer_time=2.380 print_stall=0 extruder: target=215 temp=214.7 pwm=0.556
Stats 3470.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1612072 bytes_read=822272 bytes_retransmit=9 bytes_invalid=0 send_seq=44925 receive_seq=44925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.489 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=453656 sysload=0.20 cputime=113.612 memavail=1629924 print_time=3482.247 buffer_time=2.465 print_stall=0 extruder: target=215 temp=214.9 pwm=0.400
Stats 3471.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1612976 bytes_read=822679 bytes_retransmit=9 bytes_invalid=0 send_seq=44949 receive_seq=44949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.5 sd_pos=453830 sysload=0.20 cputime=113.652 memavail=1629648 print_time=3483.209 buffer_time=2.424 print_stall=0 extruder: target=215 temp=214.7 pwm=0.623
Stats 3472.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1613789 bytes_read=823091 bytes_retransmit=9 bytes_invalid=0 send_seq=44971 receive_seq=44971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.477 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=453971 sysload=0.19 cputime=113.712 memavail=1629928 print_time=3483.979 buffer_time=2.192 print_stall=0 extruder: target=215 temp=214.6 pwm=0.697
Stats 3473.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1614910 bytes_read=823562 bytes_retransmit=9 bytes_invalid=0 send_seq=44999 receive_seq=44999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.258 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=454652 sysload=0.19 cputime=113.778 memavail=1630164 print_time=3484.819 buffer_time=2.031 print_stall=0 extruder: target=215 temp=214.7 pwm=0.610
Stats 3474.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1615889 bytes_read=823974 bytes_retransmit=9 bytes_invalid=0 send_seq=45024 receive_seq=45024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.248 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=455420 sysload=0.19 cputime=113.846 memavail=1630160 print_time=3485.960 buffer_time=2.171 print_stall=0 extruder: target=215 temp=214.9 pwm=0.399
Stats 3475.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1616915 bytes_read=824401 bytes_retransmit=9 bytes_invalid=0 send_seq=45049 receive_seq=45049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.299 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=456003 sysload=0.19 cputime=113.913 memavail=1630668 print_time=3486.794 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.0 pwm=0.378
Stats 3476.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1617932 bytes_read=824842 bytes_retransmit=9 bytes_invalid=0 send_seq=45074 receive_seq=45074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.461 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=456740 sysload=0.19 cputime=113.982 memavail=1630972 print_time=3487.974 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 3477.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000060 bytes_write=1618975 bytes_read=825259 bytes_retransmit=9 bytes_invalid=0 send_seq=45100 receive_seq=45100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.643 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=457416 sysload=0.17 cputime=114.051 memavail=1630984 print_time=3488.906 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.8 pwm=0.604
Stats 3478.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1619693 bytes_read=825671 bytes_retransmit=9 bytes_invalid=0 send_seq=45119 receive_seq=45119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.660 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=457945 sysload=0.17 cputime=114.117 memavail=1630984 print_time=3489.987 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.0 pwm=0.531
Stats 3479.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1620426 bytes_read=826087 bytes_retransmit=9 bytes_invalid=0 send_seq=45139 receive_seq=45139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.417 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=458483 sysload=0.17 cputime=114.181 memavail=1630960 print_time=3490.835 buffer_time=2.040 print_stall=0 extruder: target=215 temp=214.9 pwm=0.592
Stats 3480.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1621590 bytes_read=826509 bytes_retransmit=9 bytes_invalid=0 send_seq=45166 receive_seq=45166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=459073 sysload=0.17 cputime=114.244 memavail=1630480 print_time=3491.928 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 3481.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1622462 bytes_read=826926 bytes_retransmit=9 bytes_invalid=0 send_seq=45189 receive_seq=45189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.2 pwm=0.069 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=459221 sysload=0.17 cputime=114.281 memavail=1630484 print_time=3492.803 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.9 pwm=0.666
Stats 3482.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1623332 bytes_read=827352 bytes_retransmit=9 bytes_invalid=0 send_seq=45211 receive_seq=45211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.2 pwm=0.048 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=459373 sysload=0.16 cputime=114.340 memavail=1629980 print_time=3493.812 buffer_time=2.013 print_stall=0 extruder: target=215 temp=214.8 pwm=0.641
Stats 3483.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1624300 bytes_read=827784 bytes_retransmit=9 bytes_invalid=0 send_seq=45237 receive_seq=45237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.837 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=459524 sysload=0.16 cputime=114.400 memavail=1630232 print_time=3494.921 buffer_time=2.121 print_stall=0 extruder: target=215 temp=214.7 pwm=0.693
Stats 3484.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1625308 bytes_read=828206 bytes_retransmit=9 bytes_invalid=0 send_seq=45261 receive_seq=45261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=459645 sysload=0.16 cputime=114.457 memavail=1630728 print_time=3496.108 buffer_time=2.307 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 3485.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1626300 bytes_read=828642 bytes_retransmit=9 bytes_invalid=0 send_seq=45285 receive_seq=45285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=459798 sysload=0.16 cputime=114.515 memavail=1630796 print_time=3497.349 buffer_time=2.546 print_stall=0 extruder: target=215 temp=214.7 pwm=0.535
Stats 3486.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1626915 bytes_read=829029 bytes_retransmit=9 bytes_invalid=0 send_seq=45305 receive_seq=45305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=459859 sysload=0.16 cputime=114.572 memavail=1630792 print_time=3497.979 buffer_time=2.174 print_stall=0 extruder: target=215 temp=214.7 pwm=0.495
Stats 3487.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1627980 bytes_read=829466 bytes_retransmit=9 bytes_invalid=0 send_seq=45332 receive_seq=45332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996418 heater_bed: target=55 temp=55.1 pwm=0.240 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=460010 sysload=0.14 cputime=114.631 memavail=1630856 print_time=3499.253 buffer_time=2.448 print_stall=0 extruder: target=215 temp=214.5 pwm=0.658
Stats 3488.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1628636 bytes_read=829897 bytes_retransmit=9 bytes_invalid=0 send_seq=45352 receive_seq=45352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.1 pwm=0.162 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=460100 sysload=0.14 cputime=114.688 memavail=1631104 print_time=3499.871 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.7 pwm=0.512
Stats 3489.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1629646 bytes_read=830319 bytes_retransmit=9 bytes_invalid=0 send_seq=45379 receive_seq=45379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996419 heater_bed: target=55 temp=55.1 pwm=0.466 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=460220 sysload=0.14 cputime=114.747 memavail=1630592 print_time=3501.070 buffer_time=2.260 print_stall=0 extruder: target=215 temp=214.6 pwm=0.520
Stats 3490.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1630641 bytes_read=830766 bytes_retransmit=9 bytes_invalid=0 send_seq=45405 receive_seq=45405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.0 pwm=0.441 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=460373 sysload=0.14 cputime=114.806 memavail=1630672 print_time=3502.223 buffer_time=2.412 print_stall=0 extruder: target=215 temp=214.7 pwm=0.454
Stats 3491.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1631614 bytes_read=831197 bytes_retransmit=9 bytes_invalid=0 send_seq=45431 receive_seq=45431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=460493 sysload=0.14 cputime=114.860 memavail=1630456 print_time=3503.282 buffer_time=2.469 print_stall=0 extruder: target=215 temp=214.5 pwm=0.529
Stats 3492.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1632544 bytes_read=831614 bytes_retransmit=9 bytes_invalid=0 send_seq=45457 receive_seq=45457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996415 heater_bed: target=55 temp=55.1 pwm=0.296 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=460675 sysload=0.13 cputime=114.918 memavail=1630196 print_time=3504.218 buffer_time=2.403 print_stall=0 extruder: target=215 temp=214.5 pwm=0.565
Stats 3493.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1633597 bytes_read=832076 bytes_retransmit=9 bytes_invalid=0 send_seq=45483 receive_seq=45483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=460865 sysload=0.13 cputime=114.977 memavail=1630180 print_time=3505.008 buffer_time=2.192 print_stall=0 extruder: target=215 temp=214.5 pwm=0.566
Stats 3494.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1635310 bytes_read=832562 bytes_retransmit=9 bytes_invalid=0 send_seq=45520 receive_seq=45520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=461328 sysload=0.13 cputime=115.041 memavail=1629688 print_time=3506.351 buffer_time=2.534 print_stall=0 extruder: target=215 temp=214.7 pwm=0.504
Stats 3495.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1635842 bytes_read=832939 bytes_retransmit=9 bytes_invalid=0 send_seq=45538 receive_seq=45538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.516 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=461409 sysload=0.13 cputime=115.096 memavail=1629720 print_time=3507.119 buffer_time=2.300 print_stall=0 extruder: target=215 temp=214.6 pwm=0.576
Stats 3496.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1636477 bytes_read=833356 bytes_retransmit=9 bytes_invalid=0 send_seq=45558 receive_seq=45558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.1 pwm=0.272 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=461495 sysload=0.13 cputime=115.154 memavail=1629956 print_time=3508.094 buffer_time=2.274 print_stall=0 extruder: target=215 temp=214.8 pwm=0.464
Stats 3497.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1637040 bytes_read=833747 bytes_retransmit=9 bytes_invalid=0 send_seq=45576 receive_seq=45576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=461583 sysload=0.12 cputime=115.210 memavail=1629756 print_time=3509.017 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.0 pwm=0.391
Stats 3498.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1637631 bytes_read=834134 bytes_retransmit=9 bytes_invalid=0 send_seq=45593 receive_seq=45593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=461702 sysload=0.12 cputime=115.270 memavail=1629748 print_time=3509.970 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.9 pwm=0.560
Stats 3499.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1638186 bytes_read=834536 bytes_retransmit=9 bytes_invalid=0 send_seq=45610 receive_seq=45610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=461788 sysload=0.12 cputime=115.327 memavail=1629964 print_time=3510.870 buffer_time=2.047 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 3500.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1639104 bytes_read=834957 bytes_retransmit=9 bytes_invalid=0 send_seq=45634 receive_seq=45634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=461909 sysload=0.12 cputime=115.382 memavail=1630536 print_time=3512.030 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 3501.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1640373 bytes_read=835389 bytes_retransmit=9 bytes_invalid=0 send_seq=45663 receive_seq=45663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=462175 sysload=0.12 cputime=115.421 memavail=1630496 print_time=3513.580 buffer_time=2.756 print_stall=0 extruder: target=215 temp=215.3 pwm=0.441
Stats 3502.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1641172 bytes_read=835821 bytes_retransmit=9 bytes_invalid=0 send_seq=45686 receive_seq=45686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996410 heater_bed: target=55 temp=55.1 pwm=0.132 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=462355 sysload=0.11 cputime=115.478 memavail=1630480 print_time=3514.568 buffer_time=2.742 print_stall=0 extruder: target=215 temp=215.2 pwm=0.416
Stats 3503.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1641943 bytes_read=836257 bytes_retransmit=9 bytes_invalid=0 send_seq=45710 receive_seq=45710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=55.1 pwm=0.082 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=462473 sysload=0.11 cputime=115.536 memavail=1630800 print_time=3515.359 buffer_time=2.532 print_stall=0 extruder: target=215 temp=215.1 pwm=0.606
Stats 3504.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1642760 bytes_read=836659 bytes_retransmit=9 bytes_invalid=0 send_seq=45733 receive_seq=45733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.212 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=462653 sysload=0.11 cputime=115.595 memavail=1630984 print_time=3516.346 buffer_time=2.518 print_stall=0 extruder: target=215 temp=215.2 pwm=0.477
Stats 3505.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1643382 bytes_read=837076 bytes_retransmit=9 bytes_invalid=0 send_seq=45753 receive_seq=45753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.621 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=462742 sysload=0.11 cputime=115.652 memavail=1631060 print_time=3517.055 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.4 pwm=0.410
Stats 3506.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1643984 bytes_read=837472 bytes_retransmit=9 bytes_invalid=0 send_seq=45772 receive_seq=45772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=462828 sysload=0.11 cputime=115.709 memavail=1631020 print_time=3517.992 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.5 pwm=0.399
Stats 3507.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1644638 bytes_read=837859 bytes_retransmit=9 bytes_invalid=0 send_seq=45792 receive_seq=45792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=462920 sysload=0.10 cputime=115.767 memavail=1631564 print_time=3519.240 buffer_time=2.409 print_stall=0 extruder: target=215 temp=215.2 pwm=0.608
Stats 3508.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=1645567 bytes_read=838321 bytes_retransmit=9 bytes_invalid=0 send_seq=45818 receive_seq=45818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=463007 sysload=0.10 cputime=115.826 memavail=1631496 print_time=3519.870 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.4 pwm=0.487
Stats 3509.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=1646804 bytes_read=838761 bytes_retransmit=9 bytes_invalid=0 send_seq=45847 receive_seq=45847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=463296 sysload=0.10 cputime=115.890 memavail=1631568 print_time=3521.591 buffer_time=2.756 print_stall=0 extruder: target=215 temp=215.5 pwm=0.433
Stats 3510.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=1647454 bytes_read=839138 bytes_retransmit=9 bytes_invalid=0 send_seq=45868 receive_seq=45867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=463414 sysload=0.10 cputime=115.945 memavail=1631432 print_time=3522.369 buffer_time=2.535 print_stall=0 extruder: target=215 temp=215.6 pwm=0.475
Stats 3511.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=1648036 bytes_read=839538 bytes_retransmit=9 bytes_invalid=0 send_seq=45886 receive_seq=45886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=463534 sysload=0.10 cputime=115.998 memavail=1631388 print_time=3523.148 buffer_time=2.310 print_stall=0 extruder: target=215 temp=215.6 pwm=0.475
Stats 3512.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000042 bytes_write=1648683 bytes_read=839923 bytes_retransmit=9 bytes_invalid=0 send_seq=45905 receive_seq=45905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.735 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=463653 sysload=0.18 cputime=116.056 memavail=1631336 print_time=3523.966 buffer_time=2.128 print_stall=0 extruder: target=215 temp=215.5 pwm=0.475
Stats 3514.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1649253 bytes_read=840318 bytes_retransmit=9 bytes_invalid=0 send_seq=45924 receive_seq=45924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=55.5 mcu_temp: temp=39.3 sd_pos=463775 sysload=0.18 cputime=116.115 memavail=1631388 print_time=3525.025 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.5 pwm=0.463
Stats 3515.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1650552 bytes_read=840785 bytes_retransmit=9 bytes_invalid=0 send_seq=45954 receive_seq=45954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=55.5 mcu_temp: temp=39.6 sd_pos=463968 sysload=0.18 cputime=116.179 memavail=1631596 print_time=3526.562 buffer_time=2.721 print_stall=0 extruder: target=215 temp=215.5 pwm=0.463
Stats 3516.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1651046 bytes_read=841181 bytes_retransmit=9 bytes_invalid=0 send_seq=45973 receive_seq=45973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=464028 sysload=0.18 cputime=116.236 memavail=1631640 print_time=3526.959 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.4 pwm=0.539
Stats 3517.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1651728 bytes_read=841568 bytes_retransmit=9 bytes_invalid=0 send_seq=45994 receive_seq=45993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=464114 sysload=0.18 cputime=116.296 memavail=1631444 print_time=3527.934 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.5 pwm=0.413
Stats 3518.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1652282 bytes_read=841991 bytes_retransmit=9 bytes_invalid=0 send_seq=46012 receive_seq=46012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=464198 sysload=0.16 cputime=116.353 memavail=1631152 print_time=3528.935 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.5 pwm=0.437
Stats 3519.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1652905 bytes_read=842407 bytes_retransmit=9 bytes_invalid=0 send_seq=46032 receive_seq=46032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=464313 sysload=0.16 cputime=116.411 memavail=1631184 print_time=3529.966 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.5 pwm=0.422
Stats 3520.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1654196 bytes_read=842854 bytes_retransmit=9 bytes_invalid=0 send_seq=46064 receive_seq=46064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=464847 sysload=0.16 cputime=116.477 memavail=1630640 print_time=3531.104 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.3 pwm=0.493
Stats 3521.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1654970 bytes_read=843271 bytes_retransmit=9 bytes_invalid=0 send_seq=46084 receive_seq=46084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.073 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=465293 sysload=0.16 cputime=116.536 memavail=1630428 print_time=3531.937 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.3 pwm=0.493
Stats 3522.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1656073 bytes_read=843717 bytes_retransmit=9 bytes_invalid=0 send_seq=46113 receive_seq=46113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=466136 sysload=0.16 cputime=116.586 memavail=1630348 print_time=3532.991 buffer_time=2.141 print_stall=0 extruder: target=215 temp=215.2 pwm=0.499
Stats 3523.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1657015 bytes_read=844124 bytes_retransmit=9 bytes_invalid=0 send_seq=46137 receive_seq=46137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=466784 sysload=0.15 cputime=116.655 memavail=1630372 print_time=3534.099 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 3524.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1657988 bytes_read=844581 bytes_retransmit=9 bytes_invalid=0 send_seq=46162 receive_seq=46162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=467659 sysload=0.15 cputime=116.727 memavail=1630060 print_time=3535.030 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 3525.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1658808 bytes_read=844997 bytes_retransmit=9 bytes_invalid=0 send_seq=46185 receive_seq=46185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.385 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=468028 sysload=0.15 cputime=116.791 memavail=1629472 print_time=3535.882 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.0 pwm=0.586
Stats 3526.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1659694 bytes_read=845404 bytes_retransmit=9 bytes_invalid=0 send_seq=46209 receive_seq=46209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=468777 sysload=0.15 cputime=116.862 memavail=1629728 print_time=3537.065 buffer_time=2.209 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 3527.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1660478 bytes_read=845826 bytes_retransmit=9 bytes_invalid=0 send_seq=46230 receive_seq=46230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=10 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=469448 sysload=0.15 cputime=116.932 memavail=1629496 print_time=3537.857 buffer_time=1.996 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 3528.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1662010 bytes_read=846297 bytes_retransmit=9 bytes_invalid=0 send_seq=46264 receive_seq=46264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.592 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=469783 sysload=0.14 cputime=117.000 memavail=1629476 print_time=3539.140 buffer_time=2.275 print_stall=0 extruder: target=215 temp=214.9 pwm=0.595
Stats 3529.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1662909 bytes_read=846724 bytes_retransmit=9 bytes_invalid=0 send_seq=46289 receive_seq=46289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=469900 sysload=0.14 cputime=117.058 memavail=1629296 print_time=3540.056 buffer_time=2.190 print_stall=0 extruder: target=215 temp=214.7 pwm=0.702
Stats 3530.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1663864 bytes_read=847185 bytes_retransmit=9 bytes_invalid=0 send_seq=46315 receive_seq=46315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=470047 sysload=0.14 cputime=117.100 memavail=1629212 print_time=3541.093 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 3531.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1664873 bytes_read=847597 bytes_retransmit=9 bytes_invalid=0 send_seq=46340 receive_seq=46340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=470165 sysload=0.14 cputime=117.164 memavail=1629752 print_time=3542.211 buffer_time=2.334 print_stall=0 extruder: target=215 temp=214.7 pwm=0.582
Stats 3532.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1665841 bytes_read=848019 bytes_retransmit=9 bytes_invalid=0 send_seq=46364 receive_seq=46364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=470310 sysload=0.14 cputime=117.232 memavail=1629508 print_time=3543.395 buffer_time=2.515 print_stall=0 extruder: target=215 temp=214.9 pwm=0.443
Stats 3533.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1666519 bytes_read=848445 bytes_retransmit=9 bytes_invalid=0 send_seq=46386 receive_seq=46386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=470367 sysload=0.12 cputime=117.292 memavail=1629740 print_time=3543.978 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.7 pwm=0.550
Stats 3534.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1667544 bytes_read=848877 bytes_retransmit=9 bytes_invalid=0 send_seq=46412 receive_seq=46412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996408 heater_bed: target=55 temp=54.9 pwm=0.441 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=470485 sysload=0.12 cputime=117.356 memavail=1629752 print_time=3545.173 buffer_time=2.288 print_stall=0 extruder: target=215 temp=214.7 pwm=0.513
Stats 3535.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1668608 bytes_read=849319 bytes_retransmit=9 bytes_invalid=0 send_seq=46440 receive_seq=46440 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=470631 sysload=0.12 cputime=117.420 memavail=1629776 print_time=3546.365 buffer_time=2.475 print_stall=0 extruder: target=215 temp=214.7 pwm=0.595
Stats 3536.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1669267 bytes_read=849745 bytes_retransmit=9 bytes_invalid=0 send_seq=46462 receive_seq=46462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=54.0 mcu_temp: temp=41.7 sd_pos=470687 sysload=0.12 cputime=117.472 memavail=1630224 print_time=3546.948 buffer_time=2.057 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 3537.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1670210 bytes_read=850152 bytes_retransmit=9 bytes_invalid=0 send_seq=46486 receive_seq=46486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=470805 sysload=0.12 cputime=117.509 memavail=1630232 print_time=3548.073 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.8 pwm=0.593
Stats 3538.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1671190 bytes_read=850579 bytes_retransmit=9 bytes_invalid=0 send_seq=46511 receive_seq=46511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=470923 sysload=0.11 cputime=117.574 memavail=1629956 print_time=3549.139 buffer_time=2.246 print_stall=0 extruder: target=215 temp=214.8 pwm=0.559
Stats 3539.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1672381 bytes_read=851060 bytes_retransmit=9 bytes_invalid=0 send_seq=46541 receive_seq=46541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=471068 sysload=0.11 cputime=117.646 memavail=1629996 print_time=3550.125 buffer_time=2.225 print_stall=0 extruder: target=215 temp=214.8 pwm=0.585
Stats 3540.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1673303 bytes_read=851472 bytes_retransmit=9 bytes_invalid=0 send_seq=46566 receive_seq=46566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.816 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=471182 sysload=0.11 cputime=117.710 memavail=1629912 print_time=3550.970 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 3541.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1674787 bytes_read=851944 bytes_retransmit=9 bytes_invalid=0 send_seq=46600 receive_seq=46600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.472 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=471817 sysload=0.11 cputime=117.773 memavail=1629964 print_time=3552.236 buffer_time=2.335 print_stall=0 extruder: target=215 temp=214.8 pwm=0.600
Stats 3542.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1675778 bytes_read=852390 bytes_retransmit=9 bytes_invalid=0 send_seq=46626 receive_seq=46626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=472514 sysload=0.11 cputime=117.819 memavail=1629764 print_time=3553.059 buffer_time=2.157 print_stall=0 extruder: target=215 temp=215.0 pwm=0.575
Stats 3543.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1676766 bytes_read=852807 bytes_retransmit=9 bytes_invalid=0 send_seq=46652 receive_seq=46652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=473403 sysload=0.10 cputime=117.895 memavail=1629520 print_time=3554.147 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.3 pwm=0.313
Stats 3544.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=1678050 bytes_read=853279 bytes_retransmit=9 bytes_invalid=0 send_seq=46683 receive_seq=46683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.534 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=474182 sysload=0.10 cputime=117.971 memavail=1629508 print_time=3555.072 buffer_time=2.169 print_stall=0 extruder: target=215 temp=215.1 pwm=0.517
Stats 3545.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=1679117 bytes_read=853735 bytes_retransmit=9 bytes_invalid=0 send_seq=46711 receive_seq=46711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=475129 sysload=0.10 cputime=118.043 memavail=1629796 print_time=3556.259 buffer_time=2.355 print_stall=0 extruder: target=215 temp=215.0 pwm=0.612
Stats 3546.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=1680139 bytes_read=854152 bytes_retransmit=9 bytes_invalid=0 send_seq=46737 receive_seq=46737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=10 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=475998 sysload=0.10 cputime=118.090 memavail=1630008 print_time=3556.976 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.0 pwm=0.574
Stats 3547.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=1680910 bytes_read=854549 bytes_retransmit=9 bytes_invalid=0 send_seq=46756 receive_seq=46756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.645 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=476516 sysload=0.10 cputime=118.158 memavail=1630268 print_time=3558.115 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.0 pwm=0.646
Stats 3548.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000066 bytes_write=1681645 bytes_read=854975 bytes_retransmit=9 bytes_invalid=0 send_seq=46778 receive_seq=46778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=477025 sysload=0.10 cputime=118.228 memavail=1630052 print_time=3558.987 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 3549.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1683078 bytes_read=855437 bytes_retransmit=9 bytes_invalid=0 send_seq=46810 receive_seq=46810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.643 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=477404 sysload=0.10 cputime=118.290 memavail=1630288 print_time=3560.035 buffer_time=2.128 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 3550.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1683947 bytes_read=855864 bytes_retransmit=9 bytes_invalid=0 send_seq=46835 receive_seq=46835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.062 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=477613 sysload=0.10 cputime=118.332 memavail=1630252 print_time=3560.904 buffer_time=1.997 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 3551.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1684872 bytes_read=856310 bytes_retransmit=9 bytes_invalid=0 send_seq=46861 receive_seq=46861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=477763 sysload=0.10 cputime=118.391 memavail=1630244 print_time=3561.927 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.9 pwm=0.597
Stats 3552.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1685814 bytes_read=856712 bytes_retransmit=9 bytes_invalid=0 send_seq=46884 receive_seq=46884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.565 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=477916 sysload=0.10 cputime=118.428 memavail=1630252 print_time=3563.060 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.8 pwm=0.597
Stats 3553.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=1686817 bytes_read=857159 bytes_retransmit=9 bytes_invalid=0 send_seq=46910 receive_seq=46910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=478035 sysload=0.09 cputime=118.493 memavail=1630228 print_time=3564.246 buffer_time=2.333 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 3554.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1687865 bytes_read=857610 bytes_retransmit=9 bytes_invalid=0 send_seq=46937 receive_seq=46937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.3 sd_pos=478217 sysload=0.09 cputime=118.558 memavail=1630216 print_time=3565.475 buffer_time=2.561 print_stall=0 extruder: target=215 temp=214.6 pwm=0.666
Stats 3555.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1688497 bytes_read=857997 bytes_retransmit=9 bytes_invalid=0 send_seq=46957 receive_seq=46957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.705 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=478306 sysload=0.09 cputime=118.617 memavail=1630224 print_time=3566.083 buffer_time=2.167 print_stall=0 extruder: target=215 temp=214.6 pwm=0.545
Stats 3556.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1689537 bytes_read=858444 bytes_retransmit=9 bytes_invalid=0 send_seq=46983 receive_seq=46983 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=478426 sysload=0.09 cputime=118.674 memavail=1629992 print_time=3567.305 buffer_time=2.389 print_stall=0 extruder: target=215 temp=214.5 pwm=0.655
Stats 3557.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1690172 bytes_read=858840 bytes_retransmit=9 bytes_invalid=0 send_seq=47002 receive_seq=47002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=478518 sysload=0.09 cputime=118.709 memavail=1629976 print_time=3567.925 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.7 pwm=0.506
Stats 3558.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1691188 bytes_read=859267 bytes_retransmit=9 bytes_invalid=0 send_seq=47030 receive_seq=47030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=478669 sysload=0.08 cputime=118.775 memavail=1630212 print_time=3569.080 buffer_time=2.158 print_stall=0 extruder: target=215 temp=214.6 pwm=0.566
Stats 3559.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1692232 bytes_read=859734 bytes_retransmit=9 bytes_invalid=0 send_seq=47057 receive_seq=47057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=478821 sysload=0.08 cputime=118.841 memavail=1630252 print_time=3570.196 buffer_time=2.274 print_stall=0 extruder: target=215 temp=214.5 pwm=0.633
Stats 3560.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1693166 bytes_read=860155 bytes_retransmit=9 bytes_invalid=0 send_seq=47081 receive_seq=47081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=54.5 mcu_temp: temp=41.1 sd_pos=478941 sysload=0.08 cputime=118.900 memavail=1630484 print_time=3571.232 buffer_time=2.307 print_stall=0 extruder: target=215 temp=214.4 pwm=0.623
Stats 3561.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1694076 bytes_read=860567 bytes_retransmit=9 bytes_invalid=0 send_seq=47106 receive_seq=47106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=479093 sysload=0.08 cputime=118.958 memavail=1630488 print_time=3572.159 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.6 pwm=0.462
Stats 3562.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1694943 bytes_read=860999 bytes_retransmit=9 bytes_invalid=0 send_seq=47129 receive_seq=47129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.639 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=479247 sysload=0.08 cputime=118.996 memavail=1630228 print_time=3572.923 buffer_time=1.996 print_stall=0 extruder: target=215 temp=214.5 pwm=0.615
Stats 3563.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1696433 bytes_read=861493 bytes_retransmit=9 bytes_invalid=0 send_seq=47164 receive_seq=47164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.576 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=480126 sysload=0.07 cputime=119.064 memavail=1630496 print_time=3573.998 buffer_time=2.071 print_stall=0 extruder: target=215 temp=214.6 pwm=0.544
Stats 3564.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1697509 bytes_read=861930 bytes_retransmit=9 bytes_invalid=0 send_seq=47191 receive_seq=47191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=481088 sysload=0.07 cputime=119.117 memavail=1629992 print_time=3575.020 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.6 pwm=0.551
Stats 3565.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1698581 bytes_read=862377 bytes_retransmit=9 bytes_invalid=0 send_seq=47217 receive_seq=47217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=481794 sysload=0.07 cputime=119.186 memavail=1630248 print_time=3575.980 buffer_time=2.050 print_stall=0 extruder: target=215 temp=214.7 pwm=0.494
Stats 3566.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1699675 bytes_read=862813 bytes_retransmit=9 bytes_invalid=0 send_seq=47244 receive_seq=47244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.463 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=482786 sysload=0.07 cputime=119.257 memavail=1629996 print_time=3577.072 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 3567.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1700669 bytes_read=863220 bytes_retransmit=9 bytes_invalid=0 send_seq=47268 receive_seq=47268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=483477 sysload=0.07 cputime=119.321 memavail=1630240 print_time=3578.091 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 3568.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1701546 bytes_read=863657 bytes_retransmit=9 bytes_invalid=0 send_seq=47292 receive_seq=47292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.537 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=484187 sysload=0.15 cputime=119.388 memavail=1630240 print_time=3578.939 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 3569.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1702489 bytes_read=864088 bytes_retransmit=9 bytes_invalid=0 send_seq=47315 receive_seq=47315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=484918 sysload=0.15 cputime=119.432 memavail=1630256 print_time=3580.032 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.3 pwm=0.311
Stats 3570.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1703728 bytes_read=864521 bytes_retransmit=9 bytes_invalid=0 send_seq=47346 receive_seq=47346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.026 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=485333 sysload=0.15 cputime=119.497 memavail=1630004 print_time=3581.065 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.2 pwm=0.443
Stats 3571.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1704927 bytes_read=864971 bytes_retransmit=9 bytes_invalid=0 send_seq=47375 receive_seq=47375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=485545 sysload=0.15 cputime=119.551 memavail=1629504 print_time=3582.390 buffer_time=2.453 print_stall=0 extruder: target=215 temp=215.2 pwm=0.470
Stats 3572.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1705826 bytes_read=865386 bytes_retransmit=9 bytes_invalid=0 send_seq=47400 receive_seq=47400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=485697 sysload=0.15 cputime=119.593 memavail=1629024 print_time=3583.444 buffer_time=2.506 print_stall=0 extruder: target=215 temp=215.3 pwm=0.369
Stats 3573.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1706418 bytes_read=865771 bytes_retransmit=9 bytes_invalid=0 send_seq=47421 receive_seq=47421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=0.780 rpi: temp=54.5 mcu_temp: temp=40.2 sd_pos=485759 sysload=0.14 cputime=119.649 memavail=1628976 print_time=3584.017 buffer_time=2.078 print_stall=0 extruder: target=215 temp=215.3 pwm=0.388
Stats 3574.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1707462 bytes_read=866243 bytes_retransmit=9 bytes_invalid=0 send_seq=47449 receive_seq=47449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=485880 sysload=0.14 cputime=119.709 memavail=1628496 print_time=3585.211 buffer_time=2.269 print_stall=0 extruder: target=215 temp=215.1 pwm=0.573
Stats 3575.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1708470 bytes_read=866685 bytes_retransmit=9 bytes_invalid=0 send_seq=47475 receive_seq=47475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=486060 sysload=0.14 cputime=119.771 memavail=1628916 print_time=3586.463 buffer_time=2.520 print_stall=0 extruder: target=215 temp=214.9 pwm=0.573
Stats 3576.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1709123 bytes_read=867082 bytes_retransmit=9 bytes_invalid=0 send_seq=47497 receive_seq=47497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=486148 sysload=0.14 cputime=119.827 memavail=1629156 print_time=3587.094 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.9 pwm=0.627
Stats 3577.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1710130 bytes_read=867529 bytes_retransmit=9 bytes_invalid=0 send_seq=47523 receive_seq=47523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=486269 sysload=0.14 cputime=119.886 memavail=1628932 print_time=3588.353 buffer_time=2.408 print_stall=0 extruder: target=215 temp=215.2 pwm=0.452
Stats 3578.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1710815 bytes_read=867935 bytes_retransmit=9 bytes_invalid=0 send_seq=47544 receive_seq=47544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.8 pwm=0.970 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=486331 sysload=0.12 cputime=119.940 memavail=1628956 print_time=3588.979 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.597
Stats 3579.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1711787 bytes_read=868367 bytes_retransmit=9 bytes_invalid=0 send_seq=47570 receive_seq=47570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=486453 sysload=0.12 cputime=120.000 memavail=1629172 print_time=3590.198 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.8 pwm=0.583
Stats 3580.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1712774 bytes_read=868809 bytes_retransmit=9 bytes_invalid=0 send_seq=47595 receive_seq=47595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.496 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=486604 sysload=0.12 cputime=120.058 memavail=1629140 print_time=3591.363 buffer_time=2.413 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 3581.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1713746 bytes_read=869245 bytes_retransmit=9 bytes_invalid=0 send_seq=47622 receive_seq=47622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=486726 sysload=0.12 cputime=120.119 memavail=1629128 print_time=3592.439 buffer_time=2.486 print_stall=0 extruder: target=215 temp=214.7 pwm=0.579
Stats 3582.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1714645 bytes_read=869662 bytes_retransmit=9 bytes_invalid=0 send_seq=47648 receive_seq=47648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.618 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=486844 sysload=0.12 cputime=120.179 memavail=1629168 print_time=3593.386 buffer_time=2.433 print_stall=0 extruder: target=215 temp=214.8 pwm=0.532
Stats 3583.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1715560 bytes_read=870099 bytes_retransmit=9 bytes_invalid=0 send_seq=47672 receive_seq=47672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=487027 sysload=0.11 cputime=120.238 memavail=1628940 print_time=3594.182 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.8 pwm=0.497
Stats 3584.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1717300 bytes_read=870595 bytes_retransmit=9 bytes_invalid=0 send_seq=47708 receive_seq=47708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=487493 sysload=0.11 cputime=120.303 memavail=1628588 print_time=3595.558 buffer_time=2.603 print_stall=0 extruder: target=215 temp=214.9 pwm=0.497
Stats 3585.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1717773 bytes_read=870972 bytes_retransmit=9 bytes_invalid=0 send_seq=47726 receive_seq=47726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.8 pwm=0.844 rpi: temp=56.5 mcu_temp: temp=40.1 sd_pos=487547 sysload=0.11 cputime=120.359 memavail=1628636 print_time=3595.972 buffer_time=2.015 print_stall=0 extruder: target=215 temp=214.8 pwm=0.532
Stats 3586.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1718331 bytes_read=871369 bytes_retransmit=9 bytes_invalid=0 send_seq=47742 receive_seq=47742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=487631 sysload=0.11 cputime=120.416 memavail=1628804 print_time=3596.990 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.1 pwm=0.369
Stats 3587.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1719037 bytes_read=871775 bytes_retransmit=9 bytes_invalid=0 send_seq=47763 receive_seq=47763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=487748 sysload=0.11 cputime=120.475 memavail=1629048 print_time=3598.223 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 3588.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000061 bytes_write=1719667 bytes_read=872162 bytes_retransmit=9 bytes_invalid=0 send_seq=47783 receive_seq=47783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=487867 sysload=0.11 cputime=120.533 memavail=1628804 print_time=3599.177 buffer_time=2.216 print_stall=0 extruder: target=215 temp=214.9 pwm=0.598
Stats 3589.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1720275 bytes_read=872584 bytes_retransmit=9 bytes_invalid=0 send_seq=47801 receive_seq=47801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=487953 sysload=0.11 cputime=120.589 memavail=1628948 print_time=3600.076 buffer_time=2.114 print_stall=0 extruder: target=215 temp=215.0 pwm=0.533
Stats 3590.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1721190 bytes_read=873005 bytes_retransmit=9 bytes_invalid=0 send_seq=47825 receive_seq=47825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.210 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=488074 sysload=0.11 cputime=120.647 memavail=1628804 print_time=3601.236 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.2 pwm=0.539
Stats 3591.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1722043 bytes_read=873412 bytes_retransmit=9 bytes_invalid=0 send_seq=47849 receive_seq=47849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.168 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=488221 sysload=0.11 cputime=120.699 memavail=1629516 print_time=3601.996 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.4 pwm=0.415
Stats 3592.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1723416 bytes_read=873894 bytes_retransmit=9 bytes_invalid=0 send_seq=47882 receive_seq=47882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=488520 sysload=0.11 cputime=120.748 memavail=1628884 print_time=3603.774 buffer_time=2.808 print_stall=0 extruder: target=215 temp=215.4 pwm=0.380
Stats 3593.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1724165 bytes_read=874300 bytes_retransmit=9 bytes_invalid=0 send_seq=47903 receive_seq=47903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.450 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=488638 sysload=0.10 cputime=120.804 memavail=1628696 print_time=3604.565 buffer_time=2.598 print_stall=0 extruder: target=215 temp=215.4 pwm=0.419
Stats 3594.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1725017 bytes_read=874727 bytes_retransmit=9 bytes_invalid=0 send_seq=47928 receive_seq=47928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.573 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=488818 sysload=0.10 cputime=120.863 memavail=1629192 print_time=3605.552 buffer_time=2.584 print_stall=0 extruder: target=215 temp=215.4 pwm=0.468
Stats 3595.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1725639 bytes_read=875153 bytes_retransmit=9 bytes_invalid=0 send_seq=47947 receive_seq=47947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=488907 sysload=0.10 cputime=120.919 memavail=1628932 print_time=3606.261 buffer_time=2.292 print_stall=0 extruder: target=215 temp=215.2 pwm=0.599
Stats 3596.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1726278 bytes_read=875535 bytes_retransmit=9 bytes_invalid=0 send_seq=47966 receive_seq=47966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=488993 sysload=0.10 cputime=120.977 memavail=1629172 print_time=3607.199 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.4 pwm=0.444
Stats 3597.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1726883 bytes_read=875907 bytes_retransmit=9 bytes_invalid=0 send_seq=47983 receive_seq=47983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.255 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=489085 sysload=0.10 cputime=121.034 memavail=1629456 print_time=3608.446 buffer_time=2.475 print_stall=0 extruder: target=215 temp=215.5 pwm=0.408
Stats 3598.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000048 bytes_write=1727766 bytes_read=876358 bytes_retransmit=9 bytes_invalid=0 send_seq=48007 receive_seq=48007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.021 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=489172 sysload=0.09 cputime=121.092 memavail=1629236 print_time=3609.076 buffer_time=2.104 print_stall=0 extruder: target=215 temp=215.4 pwm=0.480
Stats 3599.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1728613 bytes_read=876780 bytes_retransmit=9 bytes_invalid=0 send_seq=48031 receive_seq=48031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=489346 sysload=0.09 cputime=121.152 memavail=1628960 print_time=3610.018 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.7 pwm=0.379
Stats 3600.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1729692 bytes_read=877207 bytes_retransmit=9 bytes_invalid=0 send_seq=48059 receive_seq=48059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=489579 sysload=0.09 cputime=121.214 memavail=1628944 print_time=3611.576 buffer_time=2.600 print_stall=0 extruder: target=215 temp=215.7 pwm=0.417
Stats 3601.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1730337 bytes_read=877638 bytes_retransmit=9 bytes_invalid=0 send_seq=48079 receive_seq=48079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=489699 sysload=0.09 cputime=121.267 memavail=1628984 print_time=3612.355 buffer_time=2.378 print_stall=0 extruder: target=215 temp=215.6 pwm=0.465
Stats 3602.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1730971 bytes_read=878015 bytes_retransmit=9 bytes_invalid=0 send_seq=48097 receive_seq=48097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=489818 sysload=0.09 cputime=121.305 memavail=1629304 print_time=3613.173 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.8 pwm=0.289
Stats 3603.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=1731553 bytes_read=878407 bytes_retransmit=9 bytes_invalid=0 send_seq=48115 receive_seq=48115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=489940 sysload=0.08 cputime=121.362 memavail=1628792 print_time=3614.232 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.7 pwm=0.411
Stats 3604.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1732935 bytes_read=878908 bytes_retransmit=9 bytes_invalid=0 send_seq=48149 receive_seq=48149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=490133 sysload=0.08 cputime=121.427 memavail=1629016 print_time=3615.769 buffer_time=2.787 print_stall=0 extruder: target=215 temp=215.7 pwm=0.407
Stats 3605.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1733402 bytes_read=879280 bytes_retransmit=9 bytes_invalid=0 send_seq=48166 receive_seq=48166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.737 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=490193 sysload=0.08 cputime=121.484 memavail=1629288 print_time=3616.166 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.6 pwm=0.466
Stats 3606.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1734049 bytes_read=879692 bytes_retransmit=9 bytes_invalid=0 send_seq=48188 receive_seq=48188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=490279 sysload=0.08 cputime=121.544 memavail=1629016 print_time=3617.141 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.6 pwm=0.456
Stats 3607.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1734664 bytes_read=880113 bytes_retransmit=9 bytes_invalid=0 send_seq=48209 receive_seq=48209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=490363 sysload=0.08 cputime=121.603 memavail=1628992 print_time=3618.141 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.5 pwm=0.399
Stats 3608.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1735372 bytes_read=880510 bytes_retransmit=9 bytes_invalid=0 send_seq=48231 receive_seq=48231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=490478 sysload=0.07 cputime=121.657 memavail=1628948 print_time=3619.173 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.5 pwm=0.491
Stats 3609.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=1736660 bytes_read=880977 bytes_retransmit=9 bytes_invalid=0 send_seq=48261 receive_seq=48261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=490997 sysload=0.07 cputime=121.722 memavail=1629236 print_time=3620.326 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.3 pwm=0.577
Stats 3610.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=1737464 bytes_read=881408 bytes_retransmit=9 bytes_invalid=0 send_seq=48284 receive_seq=48284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=491560 sysload=0.07 cputime=121.787 memavail=1629140 print_time=3621.178 buffer_time=2.188 print_stall=0 extruder: target=215 temp=215.3 pwm=0.524
Stats 3611.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=1738343 bytes_read=881800 bytes_retransmit=9 bytes_invalid=0 send_seq=48305 receive_seq=48305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.446 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=492275 sysload=0.07 cputime=121.850 memavail=1629212 print_time=3622.036 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.2 pwm=0.524
Stats 3612.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=1739522 bytes_read=882247 bytes_retransmit=9 bytes_invalid=0 send_seq=48334 receive_seq=48334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=493011 sysload=0.07 cputime=121.919 memavail=1629132 print_time=3623.169 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.2 pwm=0.515
Stats 3613.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=1740361 bytes_read=882673 bytes_retransmit=9 bytes_invalid=0 send_seq=48356 receive_seq=48356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=493637 sysload=0.07 cputime=121.983 memavail=1629128 print_time=3623.998 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.1 pwm=0.515
Stats 3614.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1741689 bytes_read=883130 bytes_retransmit=9 bytes_invalid=0 send_seq=48387 receive_seq=48387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=494392 sysload=0.07 cputime=122.054 memavail=1628908 print_time=3625.227 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.4 pwm=0.304
Stats 3615.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1742518 bytes_read=883542 bytes_retransmit=9 bytes_invalid=0 send_seq=48409 receive_seq=48409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=495014 sysload=0.07 cputime=122.122 memavail=1628788 print_time=3626.349 buffer_time=2.352 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 3616.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1743461 bytes_read=883973 bytes_retransmit=9 bytes_invalid=0 send_seq=48432 receive_seq=48432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=10 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=495872 sysload=0.07 cputime=122.188 memavail=1628720 print_time=3627.207 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.2 pwm=0.388
Stats 3617.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1744944 bytes_read=884420 bytes_retransmit=9 bytes_invalid=0 send_seq=48464 receive_seq=48464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=496153 sysload=0.07 cputime=122.250 memavail=1628824 print_time=3628.178 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.9 pwm=0.573
Stats 3618.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1745784 bytes_read=884837 bytes_retransmit=9 bytes_invalid=0 send_seq=48487 receive_seq=48487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.001 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=496297 sysload=0.06 cputime=122.308 memavail=1628748 print_time=3629.028 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.2 pwm=0.392
Stats 3619.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1746723 bytes_read=885298 bytes_retransmit=9 bytes_invalid=0 send_seq=48513 receive_seq=48513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=496415 sysload=0.06 cputime=122.368 memavail=1628764 print_time=3630.007 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.490
Stats 3620.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1747619 bytes_read=885700 bytes_retransmit=9 bytes_invalid=0 send_seq=48536 receive_seq=48536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=496562 sysload=0.06 cputime=122.425 memavail=1628512 print_time=3631.092 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.490
Stats 3621.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1748662 bytes_read=886132 bytes_retransmit=9 bytes_invalid=0 send_seq=48562 receive_seq=48562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=496679 sysload=0.06 cputime=122.477 memavail=1628736 print_time=3632.234 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.8 pwm=0.667
Stats 3622.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1749692 bytes_read=886583 bytes_retransmit=9 bytes_invalid=0 send_seq=48589 receive_seq=48589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.511 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=496825 sysload=0.06 cputime=122.517 memavail=1628780 print_time=3633.422 buffer_time=2.418 print_stall=0 extruder: target=215 temp=214.8 pwm=0.540
Stats 3623.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1750338 bytes_read=886960 bytes_retransmit=9 bytes_invalid=0 send_seq=48607 receive_seq=48607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=496885 sysload=0.06 cputime=122.570 memavail=1629052 print_time=3634.019 buffer_time=2.015 print_stall=0 extruder: target=215 temp=214.8 pwm=0.540
Stats 3624.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1751318 bytes_read=887407 bytes_retransmit=9 bytes_invalid=0 send_seq=48633 receive_seq=48633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.233 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=497061 sysload=0.06 cputime=122.629 memavail=1629044 print_time=3635.214 buffer_time=2.208 print_stall=0 extruder: target=215 temp=214.8 pwm=0.609
Stats 3625.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1752413 bytes_read=887858 bytes_retransmit=9 bytes_invalid=0 send_seq=48661 receive_seq=48660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=497208 sysload=0.06 cputime=122.687 memavail=1628992 print_time=3636.390 buffer_time=2.383 print_stall=0 extruder: target=215 temp=214.8 pwm=0.575
Stats 3626.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1753414 bytes_read=888275 bytes_retransmit=9 bytes_invalid=0 send_seq=48687 receive_seq=48686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=497323 sysload=0.06 cputime=122.744 memavail=1628784 print_time=3637.520 buffer_time=2.510 print_stall=0 extruder: target=215 temp=214.9 pwm=0.553
Stats 3627.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1754015 bytes_read=888687 bytes_retransmit=9 bytes_invalid=0 send_seq=48706 receive_seq=48705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.178 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=497381 sysload=0.06 cputime=122.798 memavail=1628976 print_time=3638.068 buffer_time=2.058 print_stall=0 extruder: target=215 temp=214.7 pwm=0.613
Stats 3628.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1754989 bytes_read=889118 bytes_retransmit=9 bytes_invalid=0 send_seq=48732 receive_seq=48731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=497498 sysload=0.05 cputime=122.855 memavail=1628720 print_time=3639.097 buffer_time=2.085 print_stall=0 extruder: target=215 temp=214.8 pwm=0.556
Stats 3629.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1755910 bytes_read=889536 bytes_retransmit=9 bytes_invalid=0 send_seq=48756 receive_seq=48755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996420 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=497638 sysload=0.05 cputime=122.914 memavail=1628976 print_time=3640.025 buffer_time=2.013 print_stall=0 extruder: target=215 temp=214.7 pwm=0.571
Stats 3630.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1757097 bytes_read=889981 bytes_retransmit=9 bytes_invalid=0 send_seq=48783 receive_seq=48783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996417 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=497925 sysload=0.05 cputime=122.979 memavail=1628664 print_time=3641.156 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 3631.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1758553 bytes_read=890436 bytes_retransmit=9 bytes_invalid=0 send_seq=48816 receive_seq=48816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996413 heater_bed: target=55 temp=54.9 pwm=0.735 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=498933 sysload=0.05 cputime=123.047 memavail=1628632 print_time=3642.183 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.0 pwm=0.437
Stats 3632.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1759396 bytes_read=890823 bytes_retransmit=9 bytes_invalid=0 send_seq=48839 receive_seq=48838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=499520 sysload=0.05 cputime=123.114 memavail=1628988 print_time=3643.027 buffer_time=2.009 print_stall=0 extruder: target=215 temp=214.7 pwm=0.607
Stats 3633.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1760780 bytes_read=891306 bytes_retransmit=9 bytes_invalid=0 send_seq=48872 receive_seq=48872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=500539 sysload=0.13 cputime=123.190 memavail=1628984 print_time=3644.192 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 3634.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1761663 bytes_read=891743 bytes_retransmit=9 bytes_invalid=0 send_seq=48895 receive_seq=48894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=501161 sysload=0.13 cputime=123.255 memavail=1629272 print_time=3645.108 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.1 pwm=0.352
Stats 3635.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1762867 bytes_read=892175 bytes_retransmit=9 bytes_invalid=0 send_seq=48923 receive_seq=48923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=502066 sysload=0.13 cputime=123.326 memavail=1629240 print_time=3646.270 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.1 pwm=0.500
Stats 3636.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1763781 bytes_read=892607 bytes_retransmit=9 bytes_invalid=0 send_seq=48947 receive_seq=48946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=502661 sysload=0.13 cputime=123.395 memavail=1629260 print_time=3647.093 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.3 pwm=0.295
Stats 3637.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1764545 bytes_read=893018 bytes_retransmit=9 bytes_invalid=0 send_seq=48969 receive_seq=48968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=54.9 pwm=0.457 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=503201 sysload=0.13 cputime=123.460 memavail=1629240 print_time=3648.132 buffer_time=2.107 print_stall=0 extruder: target=215 temp=215.0 pwm=0.545
Stats 3638.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=1765552 bytes_read=893435 bytes_retransmit=9 bytes_invalid=0 send_seq=48994 receive_seq=48994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=503510 sysload=0.12 cputime=123.522 memavail=1629248 print_time=3649.078 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 3639.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1766738 bytes_read=893902 bytes_retransmit=9 bytes_invalid=0 send_seq=49022 receive_seq=49021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.583 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=503719 sysload=0.12 cputime=123.588 memavail=1628996 print_time=3650.433 buffer_time=2.406 print_stall=0 extruder: target=215 temp=214.9 pwm=0.598
Stats 3640.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1767669 bytes_read=894328 bytes_retransmit=9 bytes_invalid=0 send_seq=49047 receive_seq=49046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=503871 sysload=0.12 cputime=123.650 memavail=1628508 print_time=3651.494 buffer_time=2.466 print_stall=0 extruder: target=215 temp=214.7 pwm=0.599
Stats 3641.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1768337 bytes_read=894725 bytes_retransmit=9 bytes_invalid=0 send_seq=49068 receive_seq=49068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=503930 sysload=0.12 cputime=123.701 memavail=1628776 print_time=3652.049 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.7 pwm=0.578
Stats 3642.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1769357 bytes_read=895172 bytes_retransmit=9 bytes_invalid=0 send_seq=49095 receive_seq=49094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.2 pwm=0.046 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=504052 sysload=0.12 cputime=123.742 memavail=1629052 print_time=3653.199 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.9 pwm=0.391
Stats 3643.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1770336 bytes_read=895608 bytes_retransmit=9 bytes_invalid=0 send_seq=49121 receive_seq=49121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=504203 sysload=0.11 cputime=123.804 memavail=1628800 print_time=3654.394 buffer_time=2.362 print_stall=0 extruder: target=215 temp=214.5 pwm=0.693
Stats 3644.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1771459 bytes_read=896050 bytes_retransmit=9 bytes_invalid=0 send_seq=49150 receive_seq=49149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.503 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=504324 sysload=0.11 cputime=123.861 memavail=1628800 print_time=3655.612 buffer_time=2.577 print_stall=0 extruder: target=215 temp=214.9 pwm=0.373
Stats 3645.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1772047 bytes_read=896477 bytes_retransmit=9 bytes_invalid=0 send_seq=49171 receive_seq=49171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=504416 sysload=0.11 cputime=123.919 memavail=1628808 print_time=3656.223 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.9 pwm=0.352
Stats 3646.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1773194 bytes_read=896923 bytes_retransmit=9 bytes_invalid=0 send_seq=49201 receive_seq=49200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.700 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=504567 sysload=0.11 cputime=123.980 memavail=1629060 print_time=3657.433 buffer_time=2.397 print_stall=0 extruder: target=215 temp=214.8 pwm=0.439
Stats 3647.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1774241 bytes_read=897345 bytes_retransmit=9 bytes_invalid=0 send_seq=49228 receive_seq=49227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.194 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=504717 sysload=0.11 cputime=124.040 memavail=1629372 print_time=3658.609 buffer_time=2.571 print_stall=0 extruder: target=215 temp=214.8 pwm=0.420
Stats 3648.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1774870 bytes_read=897767 bytes_retransmit=9 bytes_invalid=0 send_seq=49249 receive_seq=49248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.537 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=504777 sysload=0.10 cputime=124.097 memavail=1629624 print_time=3659.176 buffer_time=2.137 print_stall=0 extruder: target=215 temp=214.4 pwm=0.681
Stats 3649.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1775811 bytes_read=898218 bytes_retransmit=9 bytes_invalid=0 send_seq=49275 receive_seq=49275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.682 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=504899 sysload=0.10 cputime=124.151 memavail=1629628 print_time=3660.238 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.4 pwm=0.669
Stats 3650.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1776622 bytes_read=898615 bytes_retransmit=9 bytes_invalid=0 send_seq=49297 receive_seq=49297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.578 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=505078 sysload=0.10 cputime=124.196 memavail=1629880 print_time=3661.185 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.5 pwm=0.579
Stats 3651.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1778073 bytes_read=899102 bytes_retransmit=9 bytes_invalid=0 send_seq=49331 receive_seq=49331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.471 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=505395 sysload=0.10 cputime=124.255 memavail=1629880 print_time=3662.384 buffer_time=2.343 print_stall=0 extruder: target=215 temp=214.5 pwm=0.547
Stats 3652.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1779478 bytes_read=899563 bytes_retransmit=9 bytes_invalid=0 send_seq=49363 receive_seq=49363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=505823 sysload=0.10 cputime=124.294 memavail=1629600 print_time=3663.558 buffer_time=2.517 print_stall=0 extruder: target=215 temp=214.4 pwm=0.547
Stats 3653.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1780045 bytes_read=899930 bytes_retransmit=9 bytes_invalid=0 send_seq=49380 receive_seq=49379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=505904 sysload=0.09 cputime=124.350 memavail=1630132 print_time=3664.327 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.6 pwm=0.436
Stats 3654.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1780696 bytes_read=900367 bytes_retransmit=9 bytes_invalid=0 send_seq=49401 receive_seq=49400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=505990 sysload=0.09 cputime=124.408 memavail=1629884 print_time=3665.302 buffer_time=2.257 print_stall=0 extruder: target=215 temp=214.5 pwm=0.541
Stats 3655.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1781199 bytes_read=900758 bytes_retransmit=9 bytes_invalid=0 send_seq=49418 receive_seq=49418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=506078 sysload=0.09 cputime=124.467 memavail=1629872 print_time=3666.224 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.6 pwm=0.532
Stats 3656.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1781826 bytes_read=901135 bytes_retransmit=9 bytes_invalid=0 send_seq=49436 receive_seq=49436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=506197 sysload=0.09 cputime=124.527 memavail=1629620 print_time=3667.177 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.9 pwm=0.375
Stats 3657.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1782420 bytes_read=901547 bytes_retransmit=9 bytes_invalid=0 send_seq=49455 receive_seq=49455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=506283 sysload=0.09 cputime=124.585 memavail=1630196 print_time=3668.077 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.381
Stats 3658.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1783340 bytes_read=901968 bytes_retransmit=9 bytes_invalid=0 send_seq=49479 receive_seq=49479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.189 rpi: temp=54.5 mcu_temp: temp=42.0 sd_pos=506404 sysload=0.08 cputime=124.647 memavail=1630196 print_time=3669.237 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.3 pwm=0.254
Stats 3659.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1784625 bytes_read=902430 bytes_retransmit=9 bytes_invalid=0 send_seq=49511 receive_seq=49511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=506670 sysload=0.08 cputime=124.712 memavail=1629944 print_time=3670.788 buffer_time=2.737 print_stall=0 extruder: target=215 temp=214.9 pwm=0.609
Stats 3660.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1785534 bytes_read=902867 bytes_retransmit=9 bytes_invalid=0 send_seq=49536 receive_seq=49535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.572 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=506850 sysload=0.08 cputime=124.773 memavail=1629976 print_time=3671.775 buffer_time=2.723 print_stall=0 extruder: target=215 temp=215.5 pwm=0.194
Stats 3661.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1786211 bytes_read=903273 bytes_retransmit=9 bytes_invalid=0 send_seq=49556 receive_seq=49556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.237 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=506968 sysload=0.08 cputime=124.825 memavail=1630244 print_time=3672.566 buffer_time=2.513 print_stall=0 extruder: target=215 temp=215.1 pwm=0.481
Stats 3662.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1787056 bytes_read=903670 bytes_retransmit=9 bytes_invalid=0 send_seq=49579 receive_seq=49578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.501 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=507148 sysload=0.08 cputime=124.873 memavail=1630244 print_time=3673.553 buffer_time=2.497 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 3663.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1787685 bytes_read=904092 bytes_retransmit=9 bytes_invalid=0 send_seq=49599 receive_seq=49599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.497 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=507237 sysload=0.08 cputime=124.926 memavail=1630252 print_time=3674.262 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.5 pwm=0.297
Stats 3664.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1788358 bytes_read=904513 bytes_retransmit=9 bytes_invalid=0 send_seq=49620 receive_seq=49620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.592 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=507323 sysload=0.08 cputime=124.965 memavail=1630252 print_time=3675.200 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.5 pwm=0.323
Stats 3665.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1788952 bytes_read=904900 bytes_retransmit=9 bytes_invalid=0 send_seq=49640 receive_seq=49640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=507415 sysload=0.08 cputime=125.003 memavail=1630256 print_time=3676.447 buffer_time=2.389 print_stall=0 extruder: target=215 temp=215.7 pwm=0.212
Stats 3666.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1789849 bytes_read=905347 bytes_retransmit=9 bytes_invalid=0 send_seq=49666 receive_seq=49666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.031 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=507502 sysload=0.08 cputime=125.064 memavail=1630004 print_time=3677.077 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.5 pwm=0.415
Stats 3667.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1791079 bytes_read=905798 bytes_retransmit=9 bytes_invalid=0 send_seq=49696 receive_seq=49696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=507791 sysload=0.08 cputime=125.121 memavail=1630064 print_time=3678.798 buffer_time=2.738 print_stall=0 extruder: target=215 temp=215.5 pwm=0.444
Stats 3668.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000043 bytes_write=1791752 bytes_read=906180 bytes_retransmit=9 bytes_invalid=0 send_seq=49715 receive_seq=49715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=507909 sysload=0.07 cputime=125.168 memavail=1630292 print_time=3679.577 buffer_time=2.514 print_stall=0 extruder: target=215 temp=215.4 pwm=0.525
Stats 3669.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1792400 bytes_read=906622 bytes_retransmit=9 bytes_invalid=0 send_seq=49737 receive_seq=49737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.8 pwm=0.945 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=508029 sysload=0.07 cputime=125.230 memavail=1630012 print_time=3680.356 buffer_time=2.292 print_stall=0 extruder: target=215 temp=215.5 pwm=0.478
Stats 3670.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1793099 bytes_read=907033 bytes_retransmit=9 bytes_invalid=0 send_seq=49759 receive_seq=49759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=508148 sysload=0.07 cputime=125.291 memavail=1630012 print_time=3681.174 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.4 pwm=0.558
Stats 3671.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1793653 bytes_read=907410 bytes_retransmit=9 bytes_invalid=0 send_seq=49777 receive_seq=49777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=508270 sysload=0.07 cputime=125.352 memavail=1629760 print_time=3682.232 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.4 pwm=0.503
Stats 3672.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1794989 bytes_read=907867 bytes_retransmit=9 bytes_invalid=0 send_seq=49806 receive_seq=49805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=508463 sysload=0.07 cputime=125.418 memavail=1629256 print_time=3683.770 buffer_time=2.703 print_stall=0 extruder: target=215 temp=215.4 pwm=0.449
Stats 3673.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000047 bytes_write=1795535 bytes_read=908268 bytes_retransmit=9 bytes_invalid=0 send_seq=49826 receive_seq=49825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.8 pwm=0.716 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=508523 sysload=0.06 cputime=125.475 memavail=1629008 print_time=3684.167 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.3 pwm=0.538
Stats 3674.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1796078 bytes_read=908655 bytes_retransmit=9 bytes_invalid=0 send_seq=49842 receive_seq=49842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=508609 sysload=0.06 cputime=125.535 memavail=1629260 print_time=3685.142 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.5 pwm=0.387
Stats 3675.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1796685 bytes_read=909081 bytes_retransmit=9 bytes_invalid=0 send_seq=49861 receive_seq=49861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.205 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=508693 sysload=0.06 cputime=125.597 memavail=1629208 print_time=3686.142 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.6 pwm=0.411
Stats 3676.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1797364 bytes_read=909473 bytes_retransmit=9 bytes_invalid=0 send_seq=49882 receive_seq=49882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=508808 sysload=0.06 cputime=125.657 memavail=1628976 print_time=3687.174 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.3 pwm=0.524
Stats 3677.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1798586 bytes_read=909910 bytes_retransmit=9 bytes_invalid=0 send_seq=49913 receive_seq=49912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=509401 sysload=0.06 cputime=125.724 memavail=1628472 print_time=3688.341 buffer_time=2.269 print_stall=0 extruder: target=215 temp=215.5 pwm=0.368
Stats 3678.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1799473 bytes_read=910371 bytes_retransmit=9 bytes_invalid=0 send_seq=49938 receive_seq=49938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.105 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=510019 sysload=0.06 cputime=125.799 memavail=1628724 print_time=3689.242 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.3 pwm=0.490
Stats 3679.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1800657 bytes_read=910808 bytes_retransmit=9 bytes_invalid=0 send_seq=49965 receive_seq=49965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.061 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=510928 sysload=0.06 cputime=125.874 memavail=1628724 print_time=3690.371 buffer_time=2.296 print_stall=0 extruder: target=215 temp=215.4 pwm=0.358
Stats 3680.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1801472 bytes_read=911210 bytes_retransmit=9 bytes_invalid=0 send_seq=49988 receive_seq=49988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=511578 sysload=0.06 cputime=125.943 memavail=1628728 print_time=3691.269 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.4 pwm=0.468
Stats 3681.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1802854 bytes_read=911701 bytes_retransmit=9 bytes_invalid=0 send_seq=50020 receive_seq=50020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.336 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=512386 sysload=0.06 cputime=126.021 memavail=1628928 print_time=3692.333 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.3 pwm=0.493
Stats 3682.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1803673 bytes_read=912098 bytes_retransmit=9 bytes_invalid=0 send_seq=50042 receive_seq=50042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=10 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.452 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=513109 sysload=0.06 cputime=126.091 memavail=1629192 print_time=3693.093 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.2 pwm=0.541
Stats 3683.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=1804498 bytes_read=912515 bytes_retransmit=9 bytes_invalid=0 send_seq=50065 receive_seq=50065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.498 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=513628 sysload=0.05 cputime=126.151 memavail=1628912 print_time=3694.188 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.9 pwm=0.684
Stats 3684.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=1805161 bytes_read=912941 bytes_retransmit=9 bytes_invalid=0 send_seq=50084 receive_seq=50084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=514171 sysload=0.05 cputime=126.197 memavail=1628912 print_time=3695.085 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.9 pwm=0.593
Stats 3685.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=1806669 bytes_read=913388 bytes_retransmit=9 bytes_invalid=0 send_seq=50116 receive_seq=50116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=514465 sysload=0.05 cputime=126.255 memavail=1628928 print_time=3696.533 buffer_time=2.451 print_stall=0 extruder: target=215 temp=214.8 pwm=0.593
Stats 3686.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=1807536 bytes_read=913805 bytes_retransmit=9 bytes_invalid=0 send_seq=50140 receive_seq=50139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.189 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=514613 sysload=0.05 cputime=126.298 memavail=1628928 print_time=3697.547 buffer_time=2.465 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 3687.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=1808117 bytes_read=914221 bytes_retransmit=9 bytes_invalid=0 send_seq=50159 receive_seq=50159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.455 rpi: temp=54.5 mcu_temp: temp=42.0 sd_pos=514670 sysload=0.05 cputime=126.358 memavail=1629180 print_time=3698.089 buffer_time=2.007 print_stall=0 extruder: target=215 temp=214.7 pwm=0.632
Stats 3688.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000066 bytes_write=1809108 bytes_read=914628 bytes_retransmit=9 bytes_invalid=0 send_seq=50183 receive_seq=50183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=514846 sysload=0.05 cputime=126.419 memavail=1629436 print_time=3699.257 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.7 pwm=0.532
Stats 3689.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1810151 bytes_read=915072 bytes_retransmit=9 bytes_invalid=0 send_seq=50210 receive_seq=50210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=514963 sysload=0.05 cputime=126.483 memavail=1629436 print_time=3700.477 buffer_time=2.387 print_stall=0 extruder: target=215 temp=215.0 pwm=0.357
Stats 3690.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1810775 bytes_read=915480 bytes_retransmit=9 bytes_invalid=0 send_seq=50231 receive_seq=50231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=515023 sysload=0.05 cputime=126.542 memavail=1629688 print_time=3701.104 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 3691.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1811804 bytes_read=915892 bytes_retransmit=9 bytes_invalid=0 send_seq=50258 receive_seq=50258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.159 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=515168 sysload=0.05 cputime=126.598 memavail=1629184 print_time=3702.376 buffer_time=2.285 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 3692.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1812796 bytes_read=916309 bytes_retransmit=9 bytes_invalid=0 send_seq=50283 receive_seq=50283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=515286 sysload=0.05 cputime=126.645 memavail=1629184 print_time=3703.622 buffer_time=2.526 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 3693.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1813390 bytes_read=916735 bytes_retransmit=9 bytes_invalid=0 send_seq=50303 receive_seq=50303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=515344 sysload=0.05 cputime=126.701 memavail=1629424 print_time=3704.245 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 3694.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1814405 bytes_read=917167 bytes_retransmit=9 bytes_invalid=0 send_seq=50329 receive_seq=50329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=515462 sysload=0.05 cputime=126.763 memavail=1629192 print_time=3705.448 buffer_time=2.345 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 3695.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1815378 bytes_read=917599 bytes_retransmit=9 bytes_invalid=0 send_seq=50355 receive_seq=50355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.445 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=515580 sysload=0.05 cputime=126.824 memavail=1629324 print_time=3706.577 buffer_time=2.473 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 3696.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1816246 bytes_read=918025 bytes_retransmit=9 bytes_invalid=0 send_seq=50380 receive_seq=50377 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=515698 sysload=0.05 cputime=126.885 memavail=1628816 print_time=3707.582 buffer_time=2.475 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 3697.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1817151 bytes_read=918457 bytes_retransmit=9 bytes_invalid=0 send_seq=50406 receive_seq=50406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.017 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=515818 sysload=0.05 cputime=126.945 memavail=1629076 print_time=3708.428 buffer_time=2.319 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 3698.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=1818498 bytes_read=918929 bytes_retransmit=9 bytes_invalid=0 send_seq=50437 receive_seq=50437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.667 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=516344 sysload=0.04 cputime=127.010 memavail=1628764 print_time=3709.362 buffer_time=2.250 print_stall=0 extruder: target=215 temp=214.7 pwm=0.635
Stats 3699.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1819445 bytes_read=919360 bytes_retransmit=9 bytes_invalid=0 send_seq=50461 receive_seq=50460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.467 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=516863 sysload=0.04 cputime=127.077 memavail=1628964 print_time=3710.167 buffer_time=2.052 print_stall=0 extruder: target=215 temp=214.8 pwm=0.612
Stats 3700.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1820699 bytes_read=919797 bytes_retransmit=9 bytes_invalid=0 send_seq=50490 receive_seq=50490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=517782 sysload=0.04 cputime=127.153 memavail=1628964 print_time=3711.365 buffer_time=2.246 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 3701.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1821478 bytes_read=920219 bytes_retransmit=9 bytes_invalid=0 send_seq=50511 receive_seq=50511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=518329 sysload=0.04 cputime=127.213 memavail=1628712 print_time=3712.211 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 3702.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1822510 bytes_read=920645 bytes_retransmit=9 bytes_invalid=0 send_seq=50536 receive_seq=50536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=519192 sysload=0.04 cputime=127.262 memavail=1628712 print_time=3713.348 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.3 pwm=0.304
Stats 3703.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1823434 bytes_read=921042 bytes_retransmit=9 bytes_invalid=0 send_seq=50559 receive_seq=50558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=519638 sysload=0.04 cputime=127.314 memavail=1629040 print_time=3714.201 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.1 pwm=0.498
Stats 3704.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1824221 bytes_read=921489 bytes_retransmit=9 bytes_invalid=0 send_seq=50581 receive_seq=50581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=520215 sysload=0.04 cputime=127.384 memavail=1628792 print_time=3715.372 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 3705.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1825136 bytes_read=921910 bytes_retransmit=9 bytes_invalid=0 send_seq=50605 receive_seq=50605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=10 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=521188 sysload=0.04 cputime=127.455 memavail=1628784 print_time=3716.218 buffer_time=2.083 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 3706.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1826504 bytes_read=922352 bytes_retransmit=9 bytes_invalid=0 send_seq=50636 receive_seq=50636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=521430 sysload=0.04 cputime=127.518 memavail=1628548 print_time=3717.238 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.8 pwm=0.577
Stats 3707.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1827614 bytes_read=922814 bytes_retransmit=9 bytes_invalid=0 send_seq=50665 receive_seq=50665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=521704 sysload=0.04 cputime=127.583 memavail=1628548 print_time=3718.596 buffer_time=2.456 print_stall=0 extruder: target=215 temp=215.0 pwm=0.414
Stats 3708.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=1828561 bytes_read=923240 bytes_retransmit=9 bytes_invalid=0 send_seq=50690 receive_seq=50690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.559 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=521853 sysload=0.03 cputime=127.643 memavail=1628800 print_time=3719.640 buffer_time=2.496 print_stall=0 extruder: target=215 temp=214.7 pwm=0.663
Stats 3709.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1829281 bytes_read=923657 bytes_retransmit=9 bytes_invalid=0 send_seq=50713 receive_seq=50713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=0.667 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=521943 sysload=0.03 cputime=127.695 memavail=1628548 print_time=3720.197 buffer_time=2.052 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 3710.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1830289 bytes_read=924099 bytes_retransmit=9 bytes_invalid=0 send_seq=50739 receive_seq=50738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=522065 sysload=0.03 cputime=127.743 memavail=1628740 print_time=3721.331 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.6 pwm=0.635
Stats 3711.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1831368 bytes_read=924540 bytes_retransmit=9 bytes_invalid=0 send_seq=50767 receive_seq=50766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=522246 sysload=0.03 cputime=127.806 memavail=1629000 print_time=3722.518 buffer_time=2.366 print_stall=0 extruder: target=215 temp=214.6 pwm=0.547
Stats 3712.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1832405 bytes_read=924967 bytes_retransmit=9 bytes_invalid=0 send_seq=50795 receive_seq=50794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=522366 sysload=0.03 cputime=127.867 memavail=1629004 print_time=3723.706 buffer_time=2.552 print_stall=0 extruder: target=215 temp=214.6 pwm=0.549
Stats 3713.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=1833077 bytes_read=925409 bytes_retransmit=9 bytes_invalid=0 send_seq=50819 receive_seq=50819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.581 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=522428 sysload=0.03 cputime=127.928 memavail=1629460 print_time=3724.303 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.7 pwm=0.405
Stats 3714.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1834163 bytes_read=925870 bytes_retransmit=9 bytes_invalid=0 send_seq=50848 receive_seq=50848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=522580 sysload=0.03 cputime=127.989 memavail=1629760 print_time=3725.491 buffer_time=2.331 print_stall=0 extruder: target=215 temp=214.3 pwm=0.728
Stats 3715.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1835247 bytes_read=926297 bytes_retransmit=9 bytes_invalid=0 send_seq=50876 receive_seq=50876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.591 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=522700 sysload=0.03 cputime=128.051 memavail=1629760 print_time=3726.633 buffer_time=2.470 print_stall=0 extruder: target=215 temp=214.6 pwm=0.499
Stats 3716.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1835897 bytes_read=926724 bytes_retransmit=9 bytes_invalid=0 send_seq=50898 receive_seq=50898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=522789 sysload=0.03 cputime=128.112 memavail=1629768 print_time=3727.184 buffer_time=2.018 print_stall=0 extruder: target=215 temp=214.2 pwm=0.751
Stats 3717.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1836860 bytes_read=927145 bytes_retransmit=9 bytes_invalid=0 send_seq=50922 receive_seq=50922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.319 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=522911 sysload=0.03 cputime=128.172 memavail=1629516 print_time=3728.219 buffer_time=2.050 print_stall=0 extruder: target=215 temp=214.5 pwm=0.540
Stats 3718.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1838013 bytes_read=927572 bytes_retransmit=9 bytes_invalid=0 send_seq=50950 receive_seq=50950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=523119 sysload=0.03 cputime=128.233 memavail=1629768 print_time=3729.535 buffer_time=2.363 print_stall=0 extruder: target=215 temp=214.5 pwm=0.570
Stats 3719.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1839177 bytes_read=928058 bytes_retransmit=9 bytes_invalid=0 send_seq=50978 receive_seq=50978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.110 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=523338 sysload=0.03 cputime=128.295 memavail=1629520 print_time=3730.378 buffer_time=2.203 print_stall=0 extruder: target=215 temp=214.5 pwm=0.541
Stats 3720.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1840883 bytes_read=928520 bytes_retransmit=9 bytes_invalid=0 send_seq=51014 receive_seq=51013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=524247 sysload=0.03 cputime=128.361 memavail=1629480 print_time=3731.257 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.5 pwm=0.691
Stats 3721.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1841846 bytes_read=928947 bytes_retransmit=9 bytes_invalid=0 send_seq=51038 receive_seq=51038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=525019 sysload=0.03 cputime=128.441 memavail=1630032 print_time=3732.380 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.5 pwm=0.654
Stats 3722.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1843189 bytes_read=929423 bytes_retransmit=9 bytes_invalid=0 send_seq=51070 receive_seq=51070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=525945 sysload=0.03 cputime=128.513 memavail=1629588 print_time=3733.256 buffer_time=2.071 print_stall=0 extruder: target=215 temp=214.9 pwm=0.373
Stats 3723.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=1844193 bytes_read=929835 bytes_retransmit=9 bytes_invalid=0 send_seq=51095 receive_seq=51095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=526727 sysload=0.03 cputime=128.585 memavail=1629588 print_time=3734.443 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 3724.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=1845391 bytes_read=930292 bytes_retransmit=9 bytes_invalid=0 send_seq=51124 receive_seq=51123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=527656 sysload=0.03 cputime=128.657 memavail=1629900 print_time=3735.322 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.7 pwm=0.559
Stats 3725.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=1846321 bytes_read=930728 bytes_retransmit=9 bytes_invalid=0 send_seq=51148 receive_seq=51147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=528386 sysload=0.03 cputime=128.727 memavail=1629900 print_time=3736.445 buffer_time=2.254 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 3726.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=1846912 bytes_read=931115 bytes_retransmit=9 bytes_invalid=0 send_seq=51167 receive_seq=51167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=528745 sysload=0.03 cputime=128.790 memavail=1630156 print_time=3737.293 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 3727.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=1848383 bytes_read=931572 bytes_retransmit=9 bytes_invalid=0 send_seq=51198 receive_seq=51198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.833 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=529283 sysload=0.03 cputime=128.856 memavail=1630160 print_time=3738.472 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 3728.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=1849259 bytes_read=932003 bytes_retransmit=9 bytes_invalid=0 send_seq=51222 receive_seq=51221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.282 rpi: temp=54.5 mcu_temp: temp=41.9 sd_pos=529406 sysload=0.02 cputime=128.917 memavail=1630412 print_time=3739.311 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.2 pwm=0.374
Stats 3729.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=1850090 bytes_read=932425 bytes_retransmit=9 bytes_invalid=0 send_seq=51245 receive_seq=51245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=529527 sysload=0.02 cputime=128.976 memavail=1630420 print_time=3740.307 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.1 pwm=0.559
Stats 3730.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=1851120 bytes_read=932847 bytes_retransmit=9 bytes_invalid=0 send_seq=51270 receive_seq=51269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=529678 sysload=0.02 cputime=129.036 memavail=1630628 print_time=3741.399 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.0 pwm=0.578
Stats 3731.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=1852050 bytes_read=933288 bytes_retransmit=9 bytes_invalid=0 send_seq=51294 receive_seq=51294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=529798 sysload=0.02 cputime=129.087 memavail=1631220 print_time=3742.553 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.2 pwm=0.450
Stats 3732.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=1853141 bytes_read=933710 bytes_retransmit=9 bytes_invalid=0 send_seq=51321 receive_seq=51321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.544 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=529948 sysload=0.02 cputime=129.135 memavail=1630972 print_time=3743.746 buffer_time=2.537 print_stall=0 extruder: target=215 temp=215.1 pwm=0.563
Stats 3733.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=1853763 bytes_read=934127 bytes_retransmit=9 bytes_invalid=0 send_seq=51341 receive_seq=51341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=530009 sysload=0.02 cputime=129.192 memavail=1630972 print_time=3744.351 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.1 pwm=0.563
Stats 3734.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1854797 bytes_read=934573 bytes_retransmit=9 bytes_invalid=0 send_seq=51367 receive_seq=51367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.529 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=530161 sysload=0.02 cputime=129.254 memavail=1631224 print_time=3745.567 buffer_time=2.354 print_stall=0 extruder: target=215 temp=215.3 pwm=0.436
Stats 3735.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1855830 bytes_read=934995 bytes_retransmit=9 bytes_invalid=0 send_seq=51394 receive_seq=51394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.522 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=530314 sysload=0.02 cputime=129.317 memavail=1630740 print_time=3746.758 buffer_time=2.543 print_stall=0 extruder: target=215 temp=215.3 pwm=0.445
Stats 3736.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1856444 bytes_read=935412 bytes_retransmit=9 bytes_invalid=0 send_seq=51414 receive_seq=51414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=530374 sysload=0.02 cputime=129.372 memavail=1630484 print_time=3747.331 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.4 pwm=0.368
Stats 3737.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1857492 bytes_read=935858 bytes_retransmit=9 bytes_invalid=0 send_seq=51443 receive_seq=51443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=42.0 sd_pos=530496 sysload=0.02 cputime=129.434 memavail=1630232 print_time=3748.462 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.0 pwm=0.585
Stats 3738.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1858422 bytes_read=936265 bytes_retransmit=9 bytes_invalid=0 send_seq=51467 receive_seq=51467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.097 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=530648 sysload=0.02 cputime=129.494 memavail=1630300 print_time=3749.527 buffer_time=2.310 print_stall=0 extruder: target=215 temp=214.9 pwm=0.647
Stats 3739.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1859427 bytes_read=936727 bytes_retransmit=9 bytes_invalid=0 send_seq=51493 receive_seq=51493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=530800 sysload=0.02 cputime=129.555 memavail=1630048 print_time=3750.502 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 3740.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1860285 bytes_read=937143 bytes_retransmit=9 bytes_invalid=0 send_seq=51517 receive_seq=51516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=530917 sysload=0.02 cputime=129.616 memavail=1630300 print_time=3751.274 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.8 pwm=0.646
Stats 3741.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1861719 bytes_read=937595 bytes_retransmit=9 bytes_invalid=0 send_seq=51550 receive_seq=51549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=531435 sysload=0.02 cputime=129.681 memavail=1630308 print_time=3752.598 buffer_time=2.378 print_stall=0 extruder: target=215 temp=214.8 pwm=0.632
Stats 3742.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1862227 bytes_read=937997 bytes_retransmit=9 bytes_invalid=0 send_seq=51566 receive_seq=51566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=531516 sysload=0.02 cputime=129.739 memavail=1630272 print_time=3753.366 buffer_time=2.145 print_stall=0 extruder: target=215 temp=214.7 pwm=0.631
Stats 3743.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1862839 bytes_read=938393 bytes_retransmit=9 bytes_invalid=0 send_seq=51585 receive_seq=51585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.050 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=531602 sysload=0.02 cputime=129.799 memavail=1630388 print_time=3754.341 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.7 pwm=0.639
Stats 3744.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1863357 bytes_read=938785 bytes_retransmit=9 bytes_invalid=0 send_seq=51603 receive_seq=51603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.166 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=531690 sysload=0.02 cputime=129.858 memavail=1630384 print_time=3755.264 buffer_time=2.039 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 3745.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1864124 bytes_read=939202 bytes_retransmit=9 bytes_invalid=0 send_seq=51624 receive_seq=51623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=531837 sysload=0.02 cputime=129.920 memavail=1630132 print_time=3756.490 buffer_time=2.263 print_stall=0 extruder: target=215 temp=214.9 pwm=0.443
Stats 3746.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1864827 bytes_read=939608 bytes_retransmit=9 bytes_invalid=0 send_seq=51645 receive_seq=51644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=531951 sysload=0.02 cputime=129.983 memavail=1630148 print_time=3757.769 buffer_time=2.540 print_stall=0 extruder: target=215 temp=214.8 pwm=0.568
Stats 3747.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1865540 bytes_read=940005 bytes_retransmit=9 bytes_invalid=0 send_seq=51667 receive_seq=51666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=532016 sysload=0.02 cputime=130.042 memavail=1629880 print_time=3758.277 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.2 pwm=0.313
Stats 3748.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=1866818 bytes_read=940497 bytes_retransmit=9 bytes_invalid=0 send_seq=51700 receive_seq=51700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.701 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=532282 sysload=0.02 cputime=130.109 memavail=1629888 print_time=3759.828 buffer_time=2.597 print_stall=0 extruder: target=215 temp=214.9 pwm=0.595
Stats 3749.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1867686 bytes_read=940911 bytes_retransmit=9 bytes_invalid=0 send_seq=51723 receive_seq=51722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=532462 sysload=0.02 cputime=130.170 memavail=1629888 print_time=3760.815 buffer_time=2.583 print_stall=0 extruder: target=215 temp=215.2 pwm=0.421
Stats 3750.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1868369 bytes_read=941303 bytes_retransmit=9 bytes_invalid=0 send_seq=51745 receive_seq=51745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=532580 sysload=0.02 cputime=130.228 memavail=1629644 print_time=3761.606 buffer_time=2.372 print_stall=0 extruder: target=215 temp=215.2 pwm=0.423
Stats 3751.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1869300 bytes_read=941733 bytes_retransmit=9 bytes_invalid=0 send_seq=51770 receive_seq=51770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=532760 sysload=0.02 cputime=130.282 memavail=1629648 print_time=3762.593 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.6 pwm=0.135
Stats 3752.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1869931 bytes_read=942135 bytes_retransmit=9 bytes_invalid=0 send_seq=51791 receive_seq=51791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=532849 sysload=0.02 cputime=130.327 memavail=1629908 print_time=3763.302 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.2 pwm=0.434
Stats 3753.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=1870556 bytes_read=942507 bytes_retransmit=9 bytes_invalid=0 send_seq=51809 receive_seq=51808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.446 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=532935 sysload=0.02 cputime=130.387 memavail=1629656 print_time=3764.239 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.4 pwm=0.361
Stats 3754.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=1871165 bytes_read=942944 bytes_retransmit=9 bytes_invalid=0 send_seq=51829 receive_seq=51829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=533027 sysload=0.02 cputime=130.448 memavail=1629908 print_time=3765.487 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.3 pwm=0.442
Stats 3755.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=1872195 bytes_read=943380 bytes_retransmit=9 bytes_invalid=0 send_seq=51856 receive_seq=51856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=533201 sysload=0.02 cputime=130.511 memavail=1629656 print_time=3766.310 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.4 pwm=0.484
Stats 3756.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=1873237 bytes_read=943787 bytes_retransmit=9 bytes_invalid=0 send_seq=51881 receive_seq=51880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=533403 sysload=0.02 cputime=130.575 memavail=1629908 print_time=3767.838 buffer_time=2.595 print_stall=0 extruder: target=215 temp=215.4 pwm=0.512
Stats 3757.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=1873903 bytes_read=944209 bytes_retransmit=9 bytes_invalid=0 send_seq=51902 receive_seq=51901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=533521 sysload=0.02 cputime=130.636 memavail=1629848 print_time=3768.617 buffer_time=2.372 print_stall=0 extruder: target=215 temp=215.8 pwm=0.238
Stats 3758.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000046 bytes_write=1874577 bytes_read=944620 bytes_retransmit=9 bytes_invalid=0 send_seq=51923 receive_seq=51923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=533641 sysload=0.01 cputime=130.696 memavail=1629588 print_time=3769.396 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.7 pwm=0.382
Stats 3759.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1875403 bytes_read=945037 bytes_retransmit=9 bytes_invalid=0 send_seq=51946 receive_seq=51946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.070 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=533820 sysload=0.01 cputime=130.760 memavail=1629608 print_time=3770.878 buffer_time=2.631 print_stall=0 extruder: target=215 temp=215.6 pwm=0.467
Stats 3760.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1875825 bytes_read=945444 bytes_retransmit=9 bytes_invalid=0 send_seq=51964 receive_seq=51964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=533882 sysload=0.01 cputime=130.818 memavail=1629600 print_time=3771.272 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.4 pwm=0.490
Stats 3761.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1877162 bytes_read=945900 bytes_retransmit=9 bytes_invalid=0 send_seq=51995 receive_seq=51995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.273 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=534075 sysload=0.01 cputime=130.883 memavail=1629552 print_time=3772.809 buffer_time=2.560 print_stall=0 extruder: target=215 temp=215.2 pwm=0.627
Stats 3762.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1877761 bytes_read=946282 bytes_retransmit=9 bytes_invalid=0 send_seq=52014 receive_seq=52014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=534165 sysload=0.01 cputime=130.941 memavail=1629556 print_time=3773.517 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.4 pwm=0.465
Stats 3763.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000045 bytes_write=1878364 bytes_read=946694 bytes_retransmit=9 bytes_invalid=0 send_seq=52033 receive_seq=52033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.571 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=534248 sysload=0.01 cputime=131.002 memavail=1629780 print_time=3774.535 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.4 pwm=0.498
Stats 3764.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1879126 bytes_read=947115 bytes_retransmit=9 bytes_invalid=0 send_seq=52055 receive_seq=52054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=534361 sysload=0.01 cputime=131.063 memavail=1629304 print_time=3775.549 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.4 pwm=0.507
Stats 3765.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1879719 bytes_read=947497 bytes_retransmit=9 bytes_invalid=0 send_seq=52073 receive_seq=52073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.170 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=534479 sysload=0.01 cputime=131.121 memavail=1629556 print_time=3776.608 buffer_time=2.351 print_stall=0 extruder: target=215 temp=215.4 pwm=0.507
Stats 3766.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1880841 bytes_read=947954 bytes_retransmit=9 bytes_invalid=0 send_seq=52101 receive_seq=52101 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.165 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=534940 sysload=0.01 cputime=131.184 memavail=1629308 print_time=3777.382 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.2 pwm=0.575
Stats 3767.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1881912 bytes_read=948390 bytes_retransmit=9 bytes_invalid=0 send_seq=52128 receive_seq=52128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.764 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=535857 sysload=0.01 cputime=131.256 memavail=1629552 print_time=3778.421 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.1 pwm=0.543
Stats 3768.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=1882925 bytes_read=948807 bytes_retransmit=9 bytes_invalid=0 send_seq=52154 receive_seq=52154 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=536469 sysload=0.09 cputime=131.323 memavail=1629312 print_time=3779.336 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.2 pwm=0.508
Stats 3769.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1884057 bytes_read=949264 bytes_retransmit=9 bytes_invalid=0 send_seq=52179 receive_seq=52179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.570 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=537534 sysload=0.09 cputime=131.393 memavail=1629568 print_time=3780.446 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 3770.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1885018 bytes_read=949685 bytes_retransmit=9 bytes_invalid=0 send_seq=52204 receive_seq=52203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=42.0 sd_pos=538193 sysload=0.09 cputime=131.446 memavail=1629572 print_time=3781.361 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 3771.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1886051 bytes_read=950102 bytes_retransmit=9 bytes_invalid=0 send_seq=52229 receive_seq=52229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=538994 sysload=0.09 cputime=131.507 memavail=1629320 print_time=3782.496 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.0 pwm=0.518
Stats 3772.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1886846 bytes_read=950529 bytes_retransmit=9 bytes_invalid=0 send_seq=52251 receive_seq=52251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=10 freq=71996377 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=42.0 sd_pos=539702 sysload=0.09 cputime=131.561 memavail=1629576 print_time=3783.469 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 3773.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=1887725 bytes_read=950945 bytes_retransmit=9 bytes_invalid=0 send_seq=52274 receive_seq=52274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=540162 sysload=0.08 cputime=131.628 memavail=1629324 print_time=3784.352 buffer_time=2.087 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 3774.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1888908 bytes_read=951372 bytes_retransmit=9 bytes_invalid=0 send_seq=52300 receive_seq=52299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.702 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=540456 sysload=0.08 cputime=131.691 memavail=1629324 print_time=3785.453 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 3775.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1889807 bytes_read=951828 bytes_retransmit=9 bytes_invalid=0 send_seq=52324 receive_seq=52324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.385 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=540603 sysload=0.08 cputime=131.750 memavail=1629336 print_time=3786.416 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 3776.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1890811 bytes_read=952240 bytes_retransmit=9 bytes_invalid=0 send_seq=52350 receive_seq=52349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=540749 sysload=0.08 cputime=131.810 memavail=1629336 print_time=3787.522 buffer_time=2.252 print_stall=0 extruder: target=215 temp=215.1 pwm=0.534
Stats 3777.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1891849 bytes_read=952662 bytes_retransmit=9 bytes_invalid=0 send_seq=52377 receive_seq=52376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.273 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=540864 sysload=0.08 cputime=131.874 memavail=1629336 print_time=3788.708 buffer_time=2.437 print_stall=0 extruder: target=215 temp=215.1 pwm=0.518
Stats 3778.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=1892404 bytes_read=953083 bytes_retransmit=9 bytes_invalid=0 send_seq=52394 receive_seq=52394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=540952 sysload=0.08 cputime=131.934 memavail=1629332 print_time=3789.320 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.9 pwm=0.592
Stats 3779.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1893448 bytes_read=953515 bytes_retransmit=9 bytes_invalid=0 send_seq=52421 receive_seq=52420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=541098 sysload=0.08 cputime=131.994 memavail=1629080 print_time=3790.569 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.2 pwm=0.307
Stats 3780.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1894399 bytes_read=953932 bytes_retransmit=9 bytes_invalid=0 send_seq=52446 receive_seq=52446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=541216 sysload=0.08 cputime=132.054 memavail=1629332 print_time=3791.831 buffer_time=2.557 print_stall=0 extruder: target=215 temp=214.7 pwm=0.693
Stats 3781.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1895097 bytes_read=954363 bytes_retransmit=9 bytes_invalid=0 send_seq=52466 receive_seq=52466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=541303 sysload=0.08 cputime=132.107 memavail=1629040 print_time=3792.459 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.7 pwm=0.602
Stats 3782.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1896147 bytes_read=954780 bytes_retransmit=9 bytes_invalid=0 send_seq=52493 receive_seq=52492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.001 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=541450 sysload=0.08 cputime=132.152 memavail=1629024 print_time=3793.699 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.8 pwm=0.519
Stats 3783.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1896755 bytes_read=955172 bytes_retransmit=9 bytes_invalid=0 send_seq=52513 receive_seq=52513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=541568 sysload=0.07 cputime=132.209 memavail=1629088 print_time=3794.315 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 3784.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1897834 bytes_read=955653 bytes_retransmit=9 bytes_invalid=0 send_seq=52541 receive_seq=52540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=541744 sysload=0.07 cputime=132.273 memavail=1629332 print_time=3795.461 buffer_time=2.182 print_stall=0 extruder: target=215 temp=214.7 pwm=0.540
Stats 3785.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1898769 bytes_read=956070 bytes_retransmit=9 bytes_invalid=0 send_seq=52567 receive_seq=52566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=541861 sysload=0.07 cputime=132.336 memavail=1629340 print_time=3796.498 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.6 pwm=0.622
Stats 3786.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1899613 bytes_read=956482 bytes_retransmit=9 bytes_invalid=0 send_seq=52589 receive_seq=52588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=542032 sysload=0.07 cputime=132.399 memavail=1629584 print_time=3797.398 buffer_time=2.116 print_stall=0 extruder: target=215 temp=214.7 pwm=0.608
Stats 3787.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1900845 bytes_read=956948 bytes_retransmit=9 bytes_invalid=0 send_seq=52618 receive_seq=52618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=542494 sysload=0.07 cputime=132.464 memavail=1629856 print_time=3798.355 buffer_time=2.072 print_stall=0 extruder: target=215 temp=214.8 pwm=0.592
Stats 3788.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=1901902 bytes_read=957365 bytes_retransmit=9 bytes_invalid=0 send_seq=52644 receive_seq=52644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.853 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=543167 sysload=0.06 cputime=132.537 memavail=1630108 print_time=3799.419 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.7 pwm=0.617
Stats 3789.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1903224 bytes_read=957822 bytes_retransmit=9 bytes_invalid=0 send_seq=52673 receive_seq=52672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.174 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=543984 sysload=0.06 cputime=132.607 memavail=1629856 print_time=3800.450 buffer_time=2.165 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 3790.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1904123 bytes_read=958268 bytes_retransmit=9 bytes_invalid=0 send_seq=52698 receive_seq=52698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=544599 sysload=0.06 cputime=132.674 memavail=1629860 print_time=3801.447 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.1 pwm=0.303
Stats 3791.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1905181 bytes_read=958685 bytes_retransmit=9 bytes_invalid=0 send_seq=52724 receive_seq=52724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.072 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=545374 sysload=0.06 cputime=132.734 memavail=1630112 print_time=3802.387 buffer_time=2.101 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 3792.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1906074 bytes_read=959102 bytes_retransmit=9 bytes_invalid=0 send_seq=52747 receive_seq=52747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=545951 sysload=0.06 cputime=132.783 memavail=1630112 print_time=3803.570 buffer_time=2.280 print_stall=0 extruder: target=215 temp=214.9 pwm=0.605
Stats 3793.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1906843 bytes_read=959518 bytes_retransmit=9 bytes_invalid=0 send_seq=52768 receive_seq=52767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=546410 sysload=0.06 cputime=132.850 memavail=1629920 print_time=3804.438 buffer_time=2.147 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 3794.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1908216 bytes_read=959980 bytes_retransmit=9 bytes_invalid=0 send_seq=52799 receive_seq=52799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=10 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.684 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=547424 sysload=0.06 cputime=132.926 memavail=1630112 print_time=3805.606 buffer_time=2.314 print_stall=0 extruder: target=215 temp=215.2 pwm=0.402
Stats 3795.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1909116 bytes_read=960397 bytes_retransmit=9 bytes_invalid=0 send_seq=52823 receive_seq=52822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=547544 sysload=0.06 cputime=132.986 memavail=1629868 print_time=3806.313 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.570
Stats 3796.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1910336 bytes_read=960868 bytes_retransmit=9 bytes_invalid=0 send_seq=52854 receive_seq=52853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=547787 sysload=0.06 cputime=133.052 memavail=1629616 print_time=3807.734 buffer_time=2.439 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 3797.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1911287 bytes_read=961280 bytes_retransmit=9 bytes_invalid=0 send_seq=52879 receive_seq=52878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=547940 sysload=0.06 cputime=133.113 memavail=1629364 print_time=3808.813 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 3798.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=1911902 bytes_read=961682 bytes_retransmit=9 bytes_invalid=0 send_seq=52899 receive_seq=52898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.533 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=548001 sysload=0.05 cputime=133.171 memavail=1629056 print_time=3809.376 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.8 pwm=0.589
Stats 3799.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1912909 bytes_read=962148 bytes_retransmit=9 bytes_invalid=0 send_seq=52926 receive_seq=52925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=548153 sysload=0.05 cputime=133.233 memavail=1629064 print_time=3810.542 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 3800.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1913999 bytes_read=962575 bytes_retransmit=9 bytes_invalid=0 send_seq=52954 receive_seq=52953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.722 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=548271 sysload=0.05 cputime=133.294 memavail=1628812 print_time=3811.737 buffer_time=2.437 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 3801.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1914643 bytes_read=962987 bytes_retransmit=9 bytes_invalid=0 send_seq=52975 receive_seq=52975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=548330 sysload=0.05 cputime=133.346 memavail=1628992 print_time=3812.335 buffer_time=2.034 print_stall=0 extruder: target=215 temp=214.6 pwm=0.629
Stats 3802.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1915685 bytes_read=963433 bytes_retransmit=9 bytes_invalid=0 send_seq=53002 receive_seq=53001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.061 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=548509 sysload=0.05 cputime=133.394 memavail=1628932 print_time=3813.540 buffer_time=2.238 print_stall=0 extruder: target=215 temp=214.5 pwm=0.604
Stats 3803.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=1916745 bytes_read=963865 bytes_retransmit=9 bytes_invalid=0 send_seq=53030 receive_seq=53030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=548660 sysload=0.05 cputime=133.459 memavail=1629000 print_time=3814.706 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.3 pwm=0.730
Stats 3804.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1917824 bytes_read=964307 bytes_retransmit=9 bytes_invalid=0 send_seq=53056 receive_seq=53055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.465 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=548812 sysload=0.05 cputime=133.524 memavail=1629068 print_time=3815.857 buffer_time=2.552 print_stall=0 extruder: target=215 temp=214.7 pwm=0.458
Stats 3805.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1918460 bytes_read=964738 bytes_retransmit=9 bytes_invalid=0 send_seq=53079 receive_seq=53078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.386 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=548874 sysload=0.05 cputime=133.583 memavail=1629072 print_time=3816.386 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.4 pwm=0.550
Stats 3806.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1919431 bytes_read=965150 bytes_retransmit=9 bytes_invalid=0 send_seq=53105 receive_seq=53103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=549053 sysload=0.05 cputime=133.644 memavail=1628772 print_time=3817.423 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.4 pwm=0.522
Stats 3807.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1920460 bytes_read=965608 bytes_retransmit=9 bytes_invalid=0 send_seq=53130 receive_seq=53129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=36 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=549297 sysload=0.05 cputime=133.706 memavail=1628764 print_time=3818.677 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.2 pwm=0.616
Stats 3808.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=1921598 bytes_read=966039 bytes_retransmit=9 bytes_invalid=0 send_seq=53158 receive_seq=53157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=549806 sysload=0.05 cputime=133.770 memavail=1629024 print_time=3819.402 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.4 pwm=0.581
Stats 3809.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1922592 bytes_read=966465 bytes_retransmit=9 bytes_invalid=0 send_seq=53184 receive_seq=53184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=549866 sysload=0.05 cputime=133.829 memavail=1629520 print_time=3821.410 buffer_time=3.099 print_stall=0 extruder: target=215 temp=214.4 pwm=0.590
Stats 3810.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1922843 bytes_read=966845 bytes_retransmit=9 bytes_invalid=0 send_seq=53199 receive_seq=53199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.743 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=549866 sysload=0.05 cputime=133.885 memavail=1629528 print_time=3821.410 buffer_time=2.097 print_stall=0 extruder: target=215 temp=214.6 pwm=0.507
Stats 3811.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1923415 bytes_read=967231 bytes_retransmit=9 bytes_invalid=0 send_seq=53218 receive_seq=53218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.430 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=549926 sysload=0.05 cputime=133.936 memavail=1630092 print_time=3823.212 buffer_time=2.898 print_stall=0 extruder: target=215 temp=214.7 pwm=0.458
Stats 3812.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1923904 bytes_read=967608 bytes_retransmit=9 bytes_invalid=0 send_seq=53236 receive_seq=53236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=549985 sysload=0.05 cputime=133.982 memavail=1629596 print_time=3825.013 buffer_time=3.698 print_stall=0 extruder: target=215 temp=214.7 pwm=0.435
Stats 3813.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=1924162 bytes_read=967995 bytes_retransmit=9 bytes_invalid=0 send_seq=53250 receive_seq=53250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=549985 sysload=0.04 cputime=134.029 memavail=1629832 print_time=3825.013 buffer_time=2.697 print_stall=0 extruder: target=215 temp=214.9 pwm=0.400
Stats 3814.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1924654 bytes_read=968386 bytes_retransmit=9 bytes_invalid=0 send_seq=53266 receive_seq=53265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=550045 sysload=0.04 cputime=134.073 memavail=1629912 print_time=3826.815 buffer_time=3.496 print_stall=0 extruder: target=215 temp=215.2 pwm=0.400
Stats 3815.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1924862 bytes_read=968748 bytes_retransmit=9 bytes_invalid=0 send_seq=53280 receive_seq=53280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=550045 sysload=0.04 cputime=134.125 memavail=1630172 print_time=3826.815 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.3 pwm=0.329
Stats 3816.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1925432 bytes_read=969165 bytes_retransmit=9 bytes_invalid=0 send_seq=53301 receive_seq=53300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.087 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=550104 sysload=0.04 cputime=134.182 memavail=1630172 print_time=3828.616 buffer_time=3.296 print_stall=0 extruder: target=215 temp=215.4 pwm=0.395
Stats 3817.4: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1925650 bytes_read=969546 bytes_retransmit=9 bytes_invalid=0 send_seq=53316 receive_seq=53316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=550104 sysload=0.04 cputime=134.236 memavail=1630440 print_time=3828.616 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.7 pwm=0.298
Stats 3818.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1926176 bytes_read=969923 bytes_retransmit=9 bytes_invalid=0 send_seq=53334 receive_seq=53334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.060 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=550163 sysload=0.04 cputime=134.293 memavail=1630408 print_time=3830.418 buffer_time=3.095 print_stall=0 extruder: target=215 temp=215.7 pwm=0.409
Stats 3819.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1926393 bytes_read=970320 bytes_retransmit=9 bytes_invalid=0 send_seq=53347 receive_seq=53347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.860 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=550163 sysload=0.04 cputime=134.349 memavail=1630164 print_time=3830.418 buffer_time=2.093 print_stall=0 extruder: target=215 temp=216.1 pwm=0.179
Stats 3820.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1926932 bytes_read=970721 bytes_retransmit=9 bytes_invalid=0 send_seq=53367 receive_seq=53367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.494 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=550222 sysload=0.04 cputime=134.407 memavail=1630168 print_time=3832.219 buffer_time=2.893 print_stall=0 extruder: target=215 temp=215.9 pwm=0.434
Stats 3821.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1927478 bytes_read=971098 bytes_retransmit=9 bytes_invalid=0 send_seq=53386 receive_seq=53385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=550281 sysload=0.04 cputime=134.463 memavail=1629916 print_time=3834.021 buffer_time=3.694 print_stall=0 extruder: target=215 temp=215.9 pwm=0.452
Stats 3822.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1927690 bytes_read=971490 bytes_retransmit=9 bytes_invalid=0 send_seq=53400 receive_seq=53400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=550281 sysload=0.04 cputime=134.514 memavail=1630164 print_time=3834.021 buffer_time=2.693 print_stall=0 extruder: target=215 temp=216.2 pwm=0.256
Stats 3823.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=1928065 bytes_read=971881 bytes_retransmit=9 bytes_invalid=0 send_seq=53418 receive_seq=53418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=550341 sysload=0.04 cputime=134.571 memavail=1629908 print_time=3834.333 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.9 pwm=0.485
Stats 3824.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=1928568 bytes_read=972273 bytes_retransmit=9 bytes_invalid=0 send_seq=53436 receive_seq=53436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=550341 sysload=0.04 cputime=134.628 memavail=1629916 print_time=3835.371 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.9 pwm=0.509
Stats 3825.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=1928936 bytes_read=972670 bytes_retransmit=9 bytes_invalid=0 send_seq=53452 receive_seq=53452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.100 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=550403 sysload=0.04 cputime=134.686 memavail=1629900 print_time=3836.709 buffer_time=2.377 print_stall=0 extruder: target=215 temp=215.8 pwm=0.503
Stats 3826.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=1929382 bytes_read=973056 bytes_retransmit=9 bytes_invalid=0 send_seq=53469 receive_seq=53469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=550403 sysload=0.04 cputime=134.740 memavail=1629916 print_time=3837.756 buffer_time=2.423 print_stall=0 extruder: target=215 temp=215.9 pwm=0.402
Stats 3827.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=1929731 bytes_read=973423 bytes_retransmit=9 bytes_invalid=0 send_seq=53485 receive_seq=53485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=550464 sysload=0.04 cputime=134.795 memavail=1629604 print_time=3839.094 buffer_time=2.760 print_stall=0 extruder: target=215 temp=215.6 pwm=0.573
Stats 3828.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=1930170 bytes_read=973825 bytes_retransmit=9 bytes_invalid=0 send_seq=53502 receive_seq=53502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.027 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=550464 sysload=0.03 cputime=134.851 memavail=1629572 print_time=3840.141 buffer_time=2.805 print_stall=0 extruder: target=215 temp=215.8 pwm=0.397
Stats 3829.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=1930529 bytes_read=974221 bytes_retransmit=9 bytes_invalid=0 send_seq=53518 receive_seq=53518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=550526 sysload=0.03 cputime=134.908 memavail=1629328 print_time=3841.479 buffer_time=3.142 print_stall=0 extruder: target=215 temp=215.5 pwm=0.519
Stats 3830.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=1930782 bytes_read=974578 bytes_retransmit=9 bytes_invalid=0 send_seq=53532 receive_seq=53532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=550526 sysload=0.03 cputime=134.960 memavail=1629576 print_time=3841.479 buffer_time=2.141 print_stall=0 extruder: target=215 temp=215.3 pwm=0.582
Stats 3831.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=1931274 bytes_read=974990 bytes_retransmit=9 bytes_invalid=0 send_seq=53551 receive_seq=53551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=550526 sysload=0.03 cputime=135.010 memavail=1628836 print_time=3842.526 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.4 pwm=0.467
Stats 3832.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=1931668 bytes_read=975376 bytes_retransmit=9 bytes_invalid=0 send_seq=53568 receive_seq=53568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.036 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=550588 sysload=0.03 cputime=135.051 memavail=1629080 print_time=3843.865 buffer_time=2.523 print_stall=0 extruder: target=215 temp=215.1 pwm=0.602
Stats 3833.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=1932107 bytes_read=975748 bytes_retransmit=9 bytes_invalid=0 send_seq=53585 receive_seq=53585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.558 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=550588 sysload=0.03 cputime=135.104 memavail=1629080 print_time=3844.911 buffer_time=2.568 print_stall=0 extruder: target=215 temp=215.4 pwm=0.352
Stats 3834.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=1932481 bytes_read=976165 bytes_retransmit=9 bytes_invalid=0 send_seq=53602 receive_seq=53602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=550649 sysload=0.03 cputime=135.160 memavail=1628828 print_time=3846.250 buffer_time=2.905 print_stall=0 extruder: target=215 temp=215.2 pwm=0.515
Stats 3835.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=1932979 bytes_read=976561 bytes_retransmit=9 bytes_invalid=0 send_seq=53621 receive_seq=53621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=550649 sysload=0.03 cputime=135.219 memavail=1629080 print_time=3847.296 buffer_time=2.950 print_stall=0 extruder: target=215 temp=215.3 pwm=0.419
Stats 3836.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=1933426 bytes_read=976933 bytes_retransmit=9 bytes_invalid=0 send_seq=53639 receive_seq=53638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=550709 sysload=0.03 cputime=135.275 memavail=1629072 print_time=3848.635 buffer_time=3.287 print_stall=0 extruder: target=215 temp=215.3 pwm=0.471
Stats 3837.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=1933638 bytes_read=977325 bytes_retransmit=9 bytes_invalid=0 send_seq=53653 receive_seq=53653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=550709 sysload=0.03 cputime=135.327 memavail=1629332 print_time=3848.635 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.1 pwm=0.596
Stats 3838.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=1934100 bytes_read=977721 bytes_retransmit=9 bytes_invalid=0 send_seq=53672 receive_seq=53672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=54.0 mcu_temp: temp=41.4 sd_pos=550709 sysload=0.03 cputime=135.383 memavail=1629340 print_time=3849.682 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.0 pwm=0.582
Stats 3839.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=1934502 bytes_read=978113 bytes_retransmit=9 bytes_invalid=0 send_seq=53690 receive_seq=53690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.623 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=550771 sysload=0.03 cputime=135.440 memavail=1629580 print_time=3851.020 buffer_time=2.667 print_stall=0 extruder: target=215 temp=215.0 pwm=0.561
Stats 3840.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=1934916 bytes_read=978510 bytes_retransmit=9 bytes_invalid=0 send_seq=53706 receive_seq=53706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=550771 sysload=0.03 cputime=135.495 memavail=1629840 print_time=3852.067 buffer_time=2.712 print_stall=0 extruder: target=215 temp=215.2 pwm=0.389
Stats 3841.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=1935287 bytes_read=978886 bytes_retransmit=9 bytes_invalid=0 send_seq=53721 receive_seq=53721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.097 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=550833 sysload=0.03 cputime=135.544 memavail=1629820 print_time=3853.405 buffer_time=3.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.609
Stats 3842.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=1935579 bytes_read=979258 bytes_retransmit=9 bytes_invalid=0 send_seq=53738 receive_seq=53738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=550833 sysload=0.03 cputime=135.588 memavail=1630084 print_time=3853.405 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.9 pwm=0.583
Stats 3843.5: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=1936339 bytes_read=979690 bytes_retransmit=9 bytes_invalid=0 send_seq=53761 receive_seq=53761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.584 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=550956 sysload=0.02 cputime=135.641 memavail=1630080 print_time=3854.673 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.2 pwm=0.374
Stats 3844.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=1937029 bytes_read=980111 bytes_retransmit=9 bytes_invalid=0 send_seq=53782 receive_seq=53782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=551080 sysload=0.02 cputime=135.688 memavail=1630032 print_time=3855.942 buffer_time=2.582 print_stall=0 extruder: target=215 temp=215.0 pwm=0.521
Stats 3845.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=1937553 bytes_read=980488 bytes_retransmit=9 bytes_invalid=0 send_seq=53801 receive_seq=53800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.046 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=551142 sysload=0.02 cputime=135.744 memavail=1629740 print_time=3856.576 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.3 pwm=0.298
Stats 3846.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=1938268 bytes_read=980910 bytes_retransmit=9 bytes_invalid=0 send_seq=53822 receive_seq=53821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=551265 sysload=0.02 cputime=135.806 memavail=1629780 print_time=3857.844 buffer_time=2.483 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 3847.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=1938697 bytes_read=981296 bytes_retransmit=9 bytes_invalid=0 send_seq=53838 receive_seq=53838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=551324 sysload=0.02 cputime=135.861 memavail=1629496 print_time=3858.478 buffer_time=2.116 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 3848.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=1939426 bytes_read=981683 bytes_retransmit=9 bytes_invalid=0 send_seq=53859 receive_seq=53858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=551448 sysload=0.02 cputime=135.921 memavail=1629276 print_time=3859.747 buffer_time=2.383 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 3849.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1939879 bytes_read=982115 bytes_retransmit=9 bytes_invalid=0 send_seq=53878 receive_seq=53878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=551510 sysload=0.02 cputime=135.980 memavail=1629024 print_time=3860.381 buffer_time=2.016 print_stall=0 extruder: target=215 temp=214.7 pwm=0.642
Stats 3850.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1940601 bytes_read=982511 bytes_retransmit=9 bytes_invalid=0 send_seq=53898 receive_seq=53897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=551634 sysload=0.02 cputime=136.030 memavail=1628780 print_time=3861.649 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.5 pwm=0.578
Stats 3851.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1941326 bytes_read=982913 bytes_retransmit=9 bytes_invalid=0 send_seq=53920 receive_seq=53920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=551750 sysload=0.02 cputime=136.070 memavail=1628532 print_time=3862.918 buffer_time=2.551 print_stall=0 extruder: target=215 temp=214.6 pwm=0.550
Stats 3852.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1941772 bytes_read=983339 bytes_retransmit=9 bytes_invalid=0 send_seq=53939 receive_seq=53939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=11 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=551810 sysload=0.02 cputime=136.117 memavail=1628788 print_time=3863.552 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.6 pwm=0.552
Stats 3853.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1942489 bytes_read=983731 bytes_retransmit=9 bytes_invalid=0 send_seq=53960 receive_seq=53960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=551930 sysload=0.02 cputime=136.178 memavail=1629036 print_time=3864.820 buffer_time=2.451 print_stall=0 extruder: target=215 temp=215.1 pwm=0.266
Stats 3854.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1942992 bytes_read=984118 bytes_retransmit=9 bytes_invalid=0 send_seq=53977 receive_seq=53977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=551990 sysload=0.02 cputime=136.234 memavail=1629544 print_time=3865.454 buffer_time=2.084 print_stall=0 extruder: target=215 temp=214.7 pwm=0.526
Stats 3855.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1943743 bytes_read=984554 bytes_retransmit=9 bytes_invalid=0 send_seq=53999 receive_seq=53998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=552108 sysload=0.02 cputime=136.297 memavail=1629788 print_time=3866.723 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.0 pwm=0.450
Stats 3856.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1944398 bytes_read=984951 bytes_retransmit=9 bytes_invalid=0 send_seq=54020 receive_seq=54020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=552227 sysload=0.02 cputime=136.354 memavail=1629796 print_time=3867.991 buffer_time=2.618 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 3857.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1944868 bytes_read=985318 bytes_retransmit=9 bytes_invalid=0 send_seq=54036 receive_seq=54036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=552287 sysload=0.02 cputime=136.413 memavail=1630048 print_time=3868.625 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 3858.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=1945625 bytes_read=985749 bytes_retransmit=9 bytes_invalid=0 send_seq=54057 receive_seq=54056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=552407 sysload=0.02 cputime=136.475 memavail=1629804 print_time=3869.894 buffer_time=2.518 print_stall=0 extruder: target=215 temp=215.2 pwm=0.404
Stats 3859.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1946073 bytes_read=986131 bytes_retransmit=9 bytes_invalid=0 send_seq=54072 receive_seq=54072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=552467 sysload=0.02 cputime=136.530 memavail=1629804 print_time=3870.528 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.2 pwm=0.404
Stats 3860.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1946736 bytes_read=986533 bytes_retransmit=9 bytes_invalid=0 send_seq=54092 receive_seq=54092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=11 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=552598 sysload=0.02 cputime=136.587 memavail=1629808 print_time=3871.805 buffer_time=2.427 print_stall=0 extruder: target=215 temp=215.3 pwm=0.436
Stats 3861.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1947603 bytes_read=986974 bytes_retransmit=9 bytes_invalid=0 send_seq=54117 receive_seq=54117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=552658 sysload=0.02 cputime=136.639 memavail=1629812 print_time=3872.681 buffer_time=2.304 print_stall=0 extruder: target=215 temp=215.3 pwm=0.513
Stats 3862.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1948325 bytes_read=987371 bytes_retransmit=9 bytes_invalid=0 send_seq=54139 receive_seq=54139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=552778 sysload=0.02 cputime=136.688 memavail=1629812 print_time=3873.950 buffer_time=2.571 print_stall=0 extruder: target=215 temp=215.4 pwm=0.508
Stats 3863.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=1948761 bytes_read=987758 bytes_retransmit=9 bytes_invalid=0 send_seq=54156 receive_seq=54156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=552838 sysload=0.02 cputime=136.744 memavail=1629804 print_time=3874.584 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.2 pwm=0.599
Stats 3864.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1949723 bytes_read=988219 bytes_retransmit=9 bytes_invalid=0 send_seq=54182 receive_seq=54182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.698 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=552957 sysload=0.02 cputime=136.812 memavail=1629788 print_time=3875.852 buffer_time=2.470 print_stall=0 extruder: target=215 temp=215.3 pwm=0.428
Stats 3865.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1950231 bytes_read=988591 bytes_retransmit=9 bytes_invalid=0 send_seq=54200 receive_seq=54199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=553016 sysload=0.02 cputime=136.874 memavail=1629820 print_time=3876.486 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.2 pwm=0.553
Stats 3866.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1950876 bytes_read=988999 bytes_retransmit=9 bytes_invalid=0 send_seq=54218 receive_seq=54218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.653 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=553135 sysload=0.02 cputime=136.934 memavail=1629788 print_time=3877.755 buffer_time=2.369 print_stall=0 extruder: target=215 temp=215.3 pwm=0.457
Stats 3867.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1951367 bytes_read=989392 bytes_retransmit=9 bytes_invalid=0 send_seq=54234 receive_seq=54234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=553194 sysload=0.02 cputime=136.989 memavail=1630084 print_time=3878.389 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.1 pwm=0.581
Stats 3868.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000048 bytes_write=1951981 bytes_read=989769 bytes_retransmit=9 bytes_invalid=0 send_seq=54254 receive_seq=54254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=553313 sysload=0.02 cputime=137.044 memavail=1630076 print_time=3879.657 buffer_time=2.270 print_stall=0 extruder: target=215 temp=215.3 pwm=0.371
Stats 3869.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1952719 bytes_read=990190 bytes_retransmit=9 bytes_invalid=0 send_seq=54277 receive_seq=54277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.169 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=553430 sysload=0.02 cputime=137.102 memavail=1630092 print_time=3880.926 buffer_time=2.538 print_stall=0 extruder: target=215 temp=215.1 pwm=0.532
Stats 3870.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1953199 bytes_read=990579 bytes_retransmit=9 bytes_invalid=0 send_seq=54295 receive_seq=54294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=553486 sysload=0.02 cputime=137.157 memavail=1630060 print_time=3881.560 buffer_time=2.169 print_stall=0 extruder: target=215 temp=215.1 pwm=0.533
Stats 3871.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1953854 bytes_read=990957 bytes_retransmit=9 bytes_invalid=0 send_seq=54313 receive_seq=54313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.035 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=553601 sysload=0.02 cputime=137.205 memavail=1630864 print_time=3882.828 buffer_time=2.437 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 3872.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1954329 bytes_read=991349 bytes_retransmit=9 bytes_invalid=0 send_seq=54331 receive_seq=54331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=553658 sysload=0.02 cputime=137.251 memavail=1630844 print_time=3883.462 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 3873.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000064 bytes_write=1955014 bytes_read=991770 bytes_retransmit=9 bytes_invalid=0 send_seq=54352 receive_seq=54352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=553774 sysload=0.01 cputime=137.311 memavail=1630624 print_time=3884.731 buffer_time=2.337 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 3874.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1955722 bytes_read=992167 bytes_retransmit=9 bytes_invalid=0 send_seq=54372 receive_seq=54371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=553888 sysload=0.01 cputime=137.367 memavail=1630600 print_time=3885.999 buffer_time=2.604 print_stall=0 extruder: target=215 temp=214.8 pwm=0.520
Stats 3875.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1956145 bytes_read=992554 bytes_retransmit=9 bytes_invalid=0 send_seq=54388 receive_seq=54388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=553945 sysload=0.01 cputime=137.421 memavail=1630592 print_time=3886.633 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 3876.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1956852 bytes_read=992980 bytes_retransmit=9 bytes_invalid=0 send_seq=54410 receive_seq=54410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=554060 sysload=0.01 cputime=137.482 memavail=1630104 print_time=3887.902 buffer_time=2.504 print_stall=0 extruder: target=215 temp=214.9 pwm=0.488
Stats 3877.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1957289 bytes_read=993337 bytes_retransmit=9 bytes_invalid=0 send_seq=54425 receive_seq=54424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=554120 sysload=0.01 cputime=137.535 memavail=1629852 print_time=3888.536 buffer_time=2.137 print_stall=0 extruder: target=215 temp=215.0 pwm=0.425
Stats 3878.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=1957989 bytes_read=993744 bytes_retransmit=9 bytes_invalid=0 send_seq=54445 receive_seq=54445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=554240 sysload=0.01 cputime=137.593 memavail=1629600 print_time=3889.804 buffer_time=2.404 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 3879.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1958481 bytes_read=994160 bytes_retransmit=9 bytes_invalid=0 send_seq=54462 receive_seq=54462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=554299 sysload=0.01 cputime=137.651 memavail=1629244 print_time=3890.439 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 3880.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1959026 bytes_read=994547 bytes_retransmit=9 bytes_invalid=0 send_seq=54482 receive_seq=54482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.8 pwm=0.672 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=554359 sysload=0.01 cputime=137.708 memavail=1629256 print_time=3892.824 buffer_time=3.421 print_stall=0 extruder: target=215 temp=215.2 pwm=0.351
Stats 3881.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1959245 bytes_read=994919 bytes_retransmit=9 bytes_invalid=0 send_seq=54496 receive_seq=54496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=554359 sysload=0.01 cputime=137.752 memavail=1628812 print_time=3892.824 buffer_time=2.421 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 3882.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1959824 bytes_read=995340 bytes_retransmit=9 bytes_invalid=0 send_seq=54517 receive_seq=54517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=554418 sysload=0.01 cputime=137.801 memavail=1628864 print_time=3895.209 buffer_time=3.803 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 3883.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=1959997 bytes_read=995687 bytes_retransmit=9 bytes_invalid=0 send_seq=54529 receive_seq=54529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.178 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=554418 sysload=0.09 cputime=137.853 memavail=1628888 print_time=3895.209 buffer_time=2.801 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 3884.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000028 bytes_write=1960509 bytes_read=996104 bytes_retransmit=9 bytes_invalid=0 send_seq=54546 receive_seq=54546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.207 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=554477 sysload=0.09 cputime=137.910 memavail=1628888 print_time=3897.594 buffer_time=4.185 print_stall=0 extruder: target=215 temp=215.2 pwm=0.468
Stats 3885.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000028 bytes_write=1960748 bytes_read=996475 bytes_retransmit=9 bytes_invalid=0 send_seq=54560 receive_seq=54560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=554477 sysload=0.09 cputime=137.964 memavail=1628888 print_time=3897.594 buffer_time=3.184 print_stall=0 extruder: target=215 temp=215.2 pwm=0.493
Stats 3886.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000028 bytes_write=1960961 bytes_read=996832 bytes_retransmit=9 bytes_invalid=0 send_seq=54574 receive_seq=54574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=554477 sysload=0.09 cputime=138.017 memavail=1628888 print_time=3897.594 buffer_time=2.183 print_stall=0 extruder: target=215 temp=215.2 pwm=0.519
Stats 3887.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000028 bytes_write=1961550 bytes_read=997249 bytes_retransmit=9 bytes_invalid=0 send_seq=54594 receive_seq=54594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=554536 sysload=0.09 cputime=138.074 memavail=1629120 print_time=3899.979 buffer_time=3.567 print_stall=0 extruder: target=215 temp=215.2 pwm=0.479
Stats 3888.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000028 bytes_write=1961780 bytes_read=997620 bytes_retransmit=9 bytes_invalid=0 send_seq=54608 receive_seq=54608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=54.5 mcu_temp: temp=42.5 sd_pos=554536 sysload=0.08 cputime=138.128 memavail=1628904 print_time=3899.979 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 3889.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=1962295 bytes_read=998017 bytes_retransmit=9 bytes_invalid=0 send_seq=54627 receive_seq=54627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.560 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=554596 sysload=0.08 cputime=138.187 memavail=1629112 print_time=3902.364 buffer_time=3.950 print_stall=0 extruder: target=215 temp=215.3 pwm=0.360
Stats 3890.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=1962557 bytes_read=998404 bytes_retransmit=9 bytes_invalid=0 send_seq=54641 receive_seq=54641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=554596 sysload=0.08 cputime=138.239 memavail=1628868 print_time=3902.364 buffer_time=2.949 print_stall=0 extruder: target=215 temp=215.2 pwm=0.439
Stats 3891.5: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=1963049 bytes_read=998790 bytes_retransmit=9 bytes_invalid=0 send_seq=54658 receive_seq=54658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=554656 sysload=0.08 cputime=138.285 memavail=1628652 print_time=3904.749 buffer_time=4.333 print_stall=0 extruder: target=215 temp=215.1 pwm=0.500
Stats 3892.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=1963283 bytes_read=999147 bytes_retransmit=9 bytes_invalid=0 send_seq=54672 receive_seq=54672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.486 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=554656 sysload=0.08 cputime=138.326 memavail=1628592 print_time=3904.749 buffer_time=3.330 print_stall=0 extruder: target=215 temp=215.0 pwm=0.557
Stats 3893.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=1963490 bytes_read=999529 bytes_retransmit=9 bytes_invalid=0 send_seq=54685 receive_seq=54685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=554656 sysload=0.08 cputime=138.378 memavail=1628856 print_time=3904.749 buffer_time=2.327 print_stall=0 extruder: target=215 temp=215.4 pwm=0.195
Stats 3894.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=1964052 bytes_read=999950 bytes_retransmit=9 bytes_invalid=0 send_seq=54706 receive_seq=54706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.8 pwm=0.816 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=554716 sysload=0.08 cputime=138.436 memavail=1628808 print_time=3907.134 buffer_time=3.709 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 3895.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=1964275 bytes_read=1000307 bytes_retransmit=9 bytes_invalid=0 send_seq=54720 receive_seq=54720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=554716 sysload=0.08 cputime=138.492 memavail=1629096 print_time=3907.134 buffer_time=2.706 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 3896.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=1964867 bytes_read=1000729 bytes_retransmit=9 bytes_invalid=0 send_seq=54741 receive_seq=54741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.8 pwm=0.644 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=554776 sysload=0.08 cputime=138.549 memavail=1629096 print_time=3909.519 buffer_time=4.088 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 3897.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=1965111 bytes_read=1001100 bytes_retransmit=9 bytes_invalid=0 send_seq=54755 receive_seq=54755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=554776 sysload=0.08 cputime=138.600 memavail=1628992 print_time=3909.519 buffer_time=3.087 print_stall=0 extruder: target=215 temp=215.0 pwm=0.557
Stats 3898.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=1965338 bytes_read=1001457 bytes_retransmit=9 bytes_invalid=0 send_seq=54769 receive_seq=54769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.031 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=554776 sysload=0.15 cputime=138.652 memavail=1629284 print_time=3909.519 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 3899.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=1966019 bytes_read=1001899 bytes_retransmit=9 bytes_invalid=0 send_seq=54791 receive_seq=54791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=554895 sysload=0.15 cputime=138.712 memavail=1629096 print_time=3911.624 buffer_time=3.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 3900.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=1966266 bytes_read=1002280 bytes_retransmit=9 bytes_invalid=0 send_seq=54807 receive_seq=54807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=0.649 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=554895 sysload=0.15 cputime=138.764 memavail=1629372 print_time=3911.624 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 3901.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=1966806 bytes_read=1002662 bytes_retransmit=9 bytes_invalid=0 send_seq=54826 receive_seq=54826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=554954 sysload=0.15 cputime=138.814 memavail=1628784 print_time=3913.426 buffer_time=2.984 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 3902.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=1967309 bytes_read=1003059 bytes_retransmit=9 bytes_invalid=0 send_seq=54843 receive_seq=54842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.202 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=555014 sysload=0.15 cputime=138.861 memavail=1628536 print_time=3915.227 buffer_time=3.780 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 3903.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=1967475 bytes_read=1003425 bytes_retransmit=9 bytes_invalid=0 send_seq=54855 receive_seq=54855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=555014 sysload=0.22 cputime=138.913 memavail=1628784 print_time=3915.227 buffer_time=2.779 print_stall=0 extruder: target=215 temp=215.2 pwm=0.395
Stats 3904.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=1968024 bytes_read=1003827 bytes_retransmit=9 bytes_invalid=0 send_seq=54876 receive_seq=54875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=555073 sysload=0.22 cputime=138.971 memavail=1628568 print_time=3917.028 buffer_time=3.576 print_stall=0 extruder: target=215 temp=215.2 pwm=0.386
Stats 3905.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=1968246 bytes_read=1004224 bytes_retransmit=9 bytes_invalid=0 send_seq=54891 receive_seq=54891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=555073 sysload=0.22 cputime=139.026 memavail=1628816 print_time=3917.028 buffer_time=2.574 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 3906.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=1968721 bytes_read=1004615 bytes_retransmit=9 bytes_invalid=0 send_seq=54909 receive_seq=54909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=555133 sysload=0.22 cputime=139.084 memavail=1628592 print_time=3918.830 buffer_time=3.372 print_stall=0 extruder: target=215 temp=215.1 pwm=0.521
Stats 3907.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=1968952 bytes_read=1004967 bytes_retransmit=9 bytes_invalid=0 send_seq=54922 receive_seq=54922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=555133 sysload=0.22 cputime=139.137 memavail=1628580 print_time=3918.830 buffer_time=2.370 print_stall=0 extruder: target=215 temp=214.9 pwm=0.586
Stats 3908.6: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=1969483 bytes_read=1005384 bytes_retransmit=9 bytes_invalid=0 send_seq=54942 receive_seq=54942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.718 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=555192 sysload=0.20 cputime=139.196 memavail=1628540 print_time=3920.631 buffer_time=3.169 print_stall=0 extruder: target=215 temp=215.0 pwm=0.412
Stats 3909.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=1969701 bytes_read=1005765 bytes_retransmit=9 bytes_invalid=0 send_seq=54955 receive_seq=54955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=555192 sysload=0.20 cputime=139.250 memavail=1628604 print_time=3920.631 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 3910.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=1970211 bytes_read=1006142 bytes_retransmit=9 bytes_invalid=0 send_seq=54973 receive_seq=54973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=555252 sysload=0.20 cputime=139.306 memavail=1628536 print_time=3922.433 buffer_time=2.964 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 3911.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=1970741 bytes_read=1006573 bytes_retransmit=9 bytes_invalid=0 send_seq=54993 receive_seq=54993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=11 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=555634 sysload=0.20 cputime=139.356 memavail=1628892 print_time=3924.279 buffer_time=3.810 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 3912.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=1971020 bytes_read=1006940 bytes_retransmit=9 bytes_invalid=0 send_seq=55009 receive_seq=55009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=555634 sysload=0.20 cputime=139.399 memavail=1628832 print_time=3924.279 buffer_time=2.805 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 3913.6: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=1971987 bytes_read=1007372 bytes_retransmit=9 bytes_invalid=0 send_seq=55035 receive_seq=55035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=10 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.111 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=555833 sysload=0.18 cputime=139.464 memavail=1628900 print_time=3924.801 buffer_time=2.323 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 3914.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=1972797 bytes_read=1007813 bytes_retransmit=9 bytes_invalid=0 send_seq=55057 receive_seq=55057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=556399 sysload=0.18 cputime=139.533 memavail=1629100 print_time=3925.637 buffer_time=2.157 print_stall=0 extruder: target=215 temp=215.0 pwm=0.544
Stats 3915.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=1974046 bytes_read=1008235 bytes_retransmit=9 bytes_invalid=0 send_seq=55084 receive_seq=55084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=557213 sysload=0.18 cputime=139.607 memavail=1629392 print_time=3926.700 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 3916.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=1974960 bytes_read=1008657 bytes_retransmit=9 bytes_invalid=0 send_seq=55108 receive_seq=55108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=557839 sysload=0.18 cputime=139.674 memavail=1629444 print_time=3927.629 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 3917.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=1975949 bytes_read=1009093 bytes_retransmit=9 bytes_invalid=0 send_seq=55132 receive_seq=55132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.025 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=558572 sysload=0.18 cputime=139.735 memavail=1629208 print_time=3928.540 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 3918.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=1976989 bytes_read=1009515 bytes_retransmit=9 bytes_invalid=0 send_seq=55159 receive_seq=55159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=559109 sysload=0.17 cputime=139.791 memavail=1629460 print_time=3929.675 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 3919.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1977716 bytes_read=1009937 bytes_retransmit=9 bytes_invalid=0 send_seq=55180 receive_seq=55180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=559754 sysload=0.17 cputime=139.858 memavail=1629712 print_time=3930.584 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.2 pwm=0.339
Stats 3920.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1979087 bytes_read=1010413 bytes_retransmit=9 bytes_invalid=0 send_seq=55212 receive_seq=55212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=10 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=560447 sysload=0.17 cputime=139.916 memavail=1629660 print_time=3931.681 buffer_time=2.188 print_stall=0 extruder: target=215 temp=215.2 pwm=0.385
Stats 3921.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1980267 bytes_read=1010830 bytes_retransmit=9 bytes_invalid=0 send_seq=55239 receive_seq=55238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=560713 sysload=0.17 cputime=139.966 memavail=1629408 print_time=3932.736 buffer_time=2.237 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 3922.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1981112 bytes_read=1011268 bytes_retransmit=9 bytes_invalid=0 send_seq=55263 receive_seq=55263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=560831 sysload=0.17 cputime=140.022 memavail=1629408 print_time=3933.662 buffer_time=2.160 print_stall=0 extruder: target=215 temp=214.8 pwm=0.593
Stats 3923.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1982106 bytes_read=1011714 bytes_retransmit=9 bytes_invalid=0 send_seq=55290 receive_seq=55289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.471 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=560973 sysload=0.16 cputime=140.084 memavail=1629408 print_time=3934.699 buffer_time=2.193 print_stall=0 extruder: target=215 temp=214.7 pwm=0.592
Stats 3924.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1983106 bytes_read=1012151 bytes_retransmit=9 bytes_invalid=0 send_seq=55316 receive_seq=55316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.392 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=561091 sysload=0.16 cputime=140.146 memavail=1629156 print_time=3935.816 buffer_time=2.307 print_stall=0 extruder: target=215 temp=214.7 pwm=0.585
Stats 3925.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1984112 bytes_read=1012593 bytes_retransmit=9 bytes_invalid=0 send_seq=55341 receive_seq=55341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=561238 sysload=0.16 cputime=140.206 memavail=1629156 print_time=3937.000 buffer_time=2.489 print_stall=0 extruder: target=215 temp=214.6 pwm=0.557
Stats 3926.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1984719 bytes_read=1012979 bytes_retransmit=9 bytes_invalid=0 send_seq=55358 receive_seq=55358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.457 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=561297 sysload=0.16 cputime=140.262 memavail=1629152 print_time=3937.583 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.7 pwm=0.456
Stats 3927.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1985753 bytes_read=1013394 bytes_retransmit=9 bytes_invalid=0 send_seq=55385 receive_seq=55385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.581 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=561444 sysload=0.16 cputime=140.324 memavail=1628668 print_time=3938.786 buffer_time=2.269 print_stall=0 extruder: target=215 temp=214.9 pwm=0.310
Stats 3928.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000058 bytes_write=1986768 bytes_read=1013824 bytes_retransmit=9 bytes_invalid=0 send_seq=55410 receive_seq=55410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=54.5 mcu_temp: temp=42.4 sd_pos=561616 sysload=0.14 cputime=140.388 memavail=1628720 print_time=3939.985 buffer_time=2.464 print_stall=0 extruder: target=215 temp=215.0 pwm=0.327
Stats 3929.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1987413 bytes_read=1014229 bytes_retransmit=9 bytes_invalid=0 send_seq=55430 receive_seq=55430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=561673 sysload=0.14 cputime=140.445 memavail=1628468 print_time=3940.567 buffer_time=2.045 print_stall=0 extruder: target=215 temp=214.6 pwm=0.529
Stats 3930.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1988386 bytes_read=1014631 bytes_retransmit=9 bytes_invalid=0 send_seq=55455 receive_seq=55455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=561818 sysload=0.14 cputime=140.504 memavail=1628716 print_time=3941.721 buffer_time=2.197 print_stall=0 extruder: target=215 temp=214.8 pwm=0.425
Stats 3931.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1989399 bytes_read=1015073 bytes_retransmit=9 bytes_invalid=0 send_seq=55480 receive_seq=55480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.516 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=561964 sysload=0.14 cputime=140.555 memavail=1628640 print_time=3942.825 buffer_time=2.301 print_stall=0 extruder: target=215 temp=214.9 pwm=0.395
Stats 3932.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1990366 bytes_read=1015509 bytes_retransmit=9 bytes_invalid=0 send_seq=55507 receive_seq=55507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=562138 sysload=0.14 cputime=140.603 memavail=1628948 print_time=3943.857 buffer_time=2.332 print_stall=0 extruder: target=215 temp=214.8 pwm=0.537
Stats 3933.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000062 bytes_write=1991188 bytes_read=1015906 bytes_retransmit=9 bytes_invalid=0 send_seq=55529 receive_seq=55529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.479 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=562283 sysload=0.13 cputime=140.656 memavail=1629240 print_time=3944.706 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 3934.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1992627 bytes_read=1016403 bytes_retransmit=9 bytes_invalid=0 send_seq=55562 receive_seq=55562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.890 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=563022 sysload=0.13 cputime=140.730 memavail=1629220 print_time=3945.867 buffer_time=2.341 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 3935.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1993512 bytes_read=1016829 bytes_retransmit=9 bytes_invalid=0 send_seq=55587 receive_seq=55587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=563544 sysload=0.13 cputime=140.800 memavail=1629168 print_time=3946.710 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 3936.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1994340 bytes_read=1017226 bytes_retransmit=9 bytes_invalid=0 send_seq=55609 receive_seq=55609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=564139 sysload=0.13 cputime=140.868 memavail=1628964 print_time=3947.590 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 3937.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1995553 bytes_read=1017688 bytes_retransmit=9 bytes_invalid=0 send_seq=55638 receive_seq=55638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=564923 sysload=0.13 cputime=140.945 memavail=1628940 print_time=3948.730 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.2 pwm=0.403
Stats 3938.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=1996463 bytes_read=1018119 bytes_retransmit=9 bytes_invalid=0 send_seq=55664 receive_seq=55664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=565595 sysload=0.12 cputime=141.014 memavail=1628884 print_time=3949.670 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.1 pwm=0.546
Stats 3939.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=1997622 bytes_read=1018571 bytes_retransmit=9 bytes_invalid=0 send_seq=55694 receive_seq=55694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=10 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=566488 sysload=0.12 cputime=141.079 memavail=1628824 print_time=3950.750 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.3 pwm=0.360
Stats 3940.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=1998290 bytes_read=1018983 bytes_retransmit=9 bytes_invalid=0 send_seq=55713 receive_seq=55713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=566856 sysload=0.12 cputime=141.124 memavail=1628548 print_time=3951.604 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 3941.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=1998987 bytes_read=1019384 bytes_retransmit=9 bytes_invalid=0 send_seq=55733 receive_seq=55733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=567357 sysload=0.12 cputime=141.185 memavail=1628324 print_time=3952.545 buffer_time=2.016 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 3942.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2000219 bytes_read=1019821 bytes_retransmit=9 bytes_invalid=0 send_seq=55763 receive_seq=55763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=567632 sysload=0.12 cputime=141.229 memavail=1628532 print_time=3953.630 buffer_time=2.100 print_stall=0 extruder: target=215 temp=214.6 pwm=0.679
Stats 3943.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2001057 bytes_read=1020253 bytes_retransmit=9 bytes_invalid=0 send_seq=55786 receive_seq=55786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=567783 sysload=0.11 cputime=141.290 memavail=1628728 print_time=3954.595 buffer_time=2.064 print_stall=0 extruder: target=215 temp=214.7 pwm=0.569
Stats 3944.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2002017 bytes_read=1020704 bytes_retransmit=9 bytes_invalid=0 send_seq=55813 receive_seq=55813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.295 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=567963 sysload=0.11 cputime=141.353 memavail=1628608 print_time=3955.699 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.5 pwm=0.588
Stats 3945.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2003001 bytes_read=1021116 bytes_retransmit=9 bytes_invalid=0 send_seq=55838 receive_seq=55838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=568115 sysload=0.11 cputime=141.415 memavail=1628844 print_time=3956.869 buffer_time=2.337 print_stall=0 extruder: target=215 temp=214.6 pwm=0.421
Stats 3946.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2004061 bytes_read=1021573 bytes_retransmit=9 bytes_invalid=0 send_seq=55866 receive_seq=55866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.443 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=568298 sysload=0.11 cputime=141.481 memavail=1628524 print_time=3958.103 buffer_time=2.570 print_stall=0 extruder: target=215 temp=214.5 pwm=0.481
Stats 3947.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2004669 bytes_read=1021969 bytes_retransmit=9 bytes_invalid=0 send_seq=55885 receive_seq=55885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=568356 sysload=0.11 cputime=141.546 memavail=1628468 print_time=3958.731 buffer_time=2.197 print_stall=0 extruder: target=215 temp=213.9 pwm=0.695
Stats 3948.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2005722 bytes_read=1022396 bytes_retransmit=9 bytes_invalid=0 send_seq=55913 receive_seq=55913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=568478 sysload=0.10 cputime=141.610 memavail=1628528 print_time=3959.992 buffer_time=2.458 print_stall=0 extruder: target=215 temp=214.0 pwm=0.605
Stats 3949.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2006453 bytes_read=1022833 bytes_retransmit=9 bytes_invalid=0 send_seq=55934 receive_seq=55934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.494 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=568571 sysload=0.10 cputime=141.672 memavail=1628528 print_time=3960.621 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.1 pwm=0.546
Stats 3950.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2007446 bytes_read=1023269 bytes_retransmit=9 bytes_invalid=0 send_seq=55961 receive_seq=55961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.531 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=568720 sysload=0.10 cputime=141.729 memavail=1628464 print_time=3961.860 buffer_time=2.325 print_stall=0 extruder: target=215 temp=214.2 pwm=0.552
Stats 3951.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2008479 bytes_read=1023696 bytes_retransmit=9 bytes_invalid=0 send_seq=55989 receive_seq=55989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=568873 sysload=0.10 cputime=141.769 memavail=1628788 print_time=3963.054 buffer_time=2.518 print_stall=0 extruder: target=215 temp=214.2 pwm=0.546
Stats 3952.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2009180 bytes_read=1024123 bytes_retransmit=9 bytes_invalid=0 send_seq=56011 receive_seq=56011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=568932 sysload=0.10 cputime=141.814 memavail=1628476 print_time=3963.631 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.4 pwm=0.446
Stats 3953.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2010068 bytes_read=1024544 bytes_retransmit=9 bytes_invalid=0 send_seq=56035 receive_seq=56035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.005 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=569113 sysload=0.09 cputime=141.875 memavail=1628720 print_time=3964.698 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.5 pwm=0.466
Stats 3954.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2010962 bytes_read=1024966 bytes_retransmit=9 bytes_invalid=0 send_seq=56059 receive_seq=56059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=569262 sysload=0.09 cputime=141.938 memavail=1628728 print_time=3965.589 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.5 pwm=0.509
Stats 3955.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2012702 bytes_read=1025478 bytes_retransmit=9 bytes_invalid=0 send_seq=56098 receive_seq=56098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=569743 sysload=0.09 cputime=142.011 memavail=1628732 print_time=3966.875 buffer_time=2.336 print_stall=0 extruder: target=215 temp=214.5 pwm=0.509
Stats 3956.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2013757 bytes_read=1025914 bytes_retransmit=9 bytes_invalid=0 send_seq=56125 receive_seq=56125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=569893 sysload=0.09 cputime=142.075 memavail=1628732 print_time=3968.958 buffer_time=3.418 print_stall=0 extruder: target=215 temp=214.6 pwm=0.478
Stats 3957.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2013985 bytes_read=1026276 bytes_retransmit=9 bytes_invalid=0 send_seq=56140 receive_seq=56140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=569893 sysload=0.09 cputime=142.116 memavail=1628956 print_time=3968.958 buffer_time=2.418 print_stall=0 extruder: target=215 temp=214.8 pwm=0.351
Stats 3958.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2014478 bytes_read=1026683 bytes_retransmit=9 bytes_invalid=0 send_seq=56158 receive_seq=56158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=569951 sysload=0.09 cputime=142.180 memavail=1628740 print_time=3970.759 buffer_time=3.218 print_stall=0 extruder: target=215 temp=214.7 pwm=0.515
Stats 3959.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2014716 bytes_read=1027074 bytes_retransmit=9 bytes_invalid=0 send_seq=56173 receive_seq=56173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.155 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=569951 sysload=0.09 cputime=142.242 memavail=1628992 print_time=3970.759 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.7 pwm=0.522
Stats 3960.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2015173 bytes_read=1027446 bytes_retransmit=9 bytes_invalid=0 send_seq=56190 receive_seq=56190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.514 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=570010 sysload=0.09 cputime=142.299 memavail=1629300 print_time=3972.560 buffer_time=3.018 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 3961.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2015384 bytes_read=1027833 bytes_retransmit=9 bytes_invalid=0 send_seq=56204 receive_seq=56204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=570010 sysload=0.09 cputime=142.335 memavail=1629796 print_time=3972.560 buffer_time=2.017 print_stall=0 extruder: target=215 temp=214.8 pwm=0.549
Stats 3962.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2015848 bytes_read=1028219 bytes_retransmit=9 bytes_invalid=0 send_seq=56221 receive_seq=56221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=570068 sysload=0.09 cputime=142.376 memavail=1629624 print_time=3974.362 buffer_time=2.817 print_stall=0 extruder: target=215 temp=214.9 pwm=0.426
Stats 3963.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2016264 bytes_read=1028596 bytes_retransmit=9 bytes_invalid=0 send_seq=56239 receive_seq=56239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=570127 sysload=0.08 cputime=142.436 memavail=1629564 print_time=3976.163 buffer_time=3.619 print_stall=0 extruder: target=215 temp=214.9 pwm=0.441
Stats 3964.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=2016564 bytes_read=1029008 bytes_retransmit=9 bytes_invalid=0 send_seq=56255 receive_seq=56255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=570127 sysload=0.08 cputime=142.494 memavail=1629692 print_time=3976.163 buffer_time=2.618 print_stall=0 extruder: target=215 temp=215.1 pwm=0.363
Stats 3965.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=2017027 bytes_read=1029394 bytes_retransmit=9 bytes_invalid=0 send_seq=56272 receive_seq=56272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=570184 sysload=0.08 cputime=142.555 memavail=1629980 print_time=3977.965 buffer_time=3.419 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 3966.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=2017280 bytes_read=1029761 bytes_retransmit=9 bytes_invalid=0 send_seq=56288 receive_seq=56288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=570184 sysload=0.08 cputime=142.608 memavail=1630004 print_time=3977.965 buffer_time=2.418 print_stall=0 extruder: target=215 temp=215.2 pwm=0.441
Stats 3967.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=2017790 bytes_read=1030173 bytes_retransmit=9 bytes_invalid=0 send_seq=56307 receive_seq=56307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=570243 sysload=0.08 cputime=142.653 memavail=1629980 print_time=3979.766 buffer_time=3.218 print_stall=0 extruder: target=215 temp=215.2 pwm=0.496
Stats 3968.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=2017999 bytes_read=1030539 bytes_retransmit=9 bytes_invalid=0 send_seq=56320 receive_seq=56320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=570243 sysload=0.07 cputime=142.707 memavail=1629980 print_time=3979.766 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.3 pwm=0.418
Stats 3969.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2018461 bytes_read=1030926 bytes_retransmit=9 bytes_invalid=0 send_seq=56337 receive_seq=56337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.416 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=570300 sysload=0.07 cputime=142.762 memavail=1629980 print_time=3981.568 buffer_time=3.019 print_stall=0 extruder: target=215 temp=215.3 pwm=0.415
Stats 3970.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2018709 bytes_read=1031328 bytes_retransmit=9 bytes_invalid=0 send_seq=56354 receive_seq=56354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=570300 sysload=0.07 cputime=142.818 memavail=1629728 print_time=3981.568 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.4 pwm=0.398
Stats 3971.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2019331 bytes_read=1031729 bytes_retransmit=9 bytes_invalid=0 send_seq=56374 receive_seq=56374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=570420 sysload=0.07 cputime=142.881 memavail=1629436 print_time=3984.256 buffer_time=3.707 print_stall=0 extruder: target=215 temp=215.3 pwm=0.450
Stats 3972.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2019530 bytes_read=1032081 bytes_retransmit=9 bytes_invalid=0 send_seq=56387 receive_seq=56387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=570420 sysload=0.07 cputime=142.934 memavail=1629432 print_time=3984.256 buffer_time=2.707 print_stall=0 extruder: target=215 temp=215.4 pwm=0.437
Stats 3973.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2019979 bytes_read=1032488 bytes_retransmit=9 bytes_invalid=0 send_seq=56405 receive_seq=56405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=570479 sysload=0.07 cputime=142.995 memavail=1629180 print_time=3986.641 buffer_time=4.091 print_stall=0 extruder: target=215 temp=215.6 pwm=0.313
Stats 3974.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2020227 bytes_read=1032879 bytes_retransmit=9 bytes_invalid=0 send_seq=56420 receive_seq=56420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=570479 sysload=0.07 cputime=143.051 memavail=1628868 print_time=3986.641 buffer_time=3.091 print_stall=0 extruder: target=215 temp=215.4 pwm=0.485
Stats 3975.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2020445 bytes_read=1033241 bytes_retransmit=9 bytes_invalid=0 send_seq=56435 receive_seq=56435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.068 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=570479 sysload=0.07 cputime=143.090 memavail=1628612 print_time=3986.641 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.2 pwm=0.536
Stats 3976.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2020925 bytes_read=1033648 bytes_retransmit=9 bytes_invalid=0 send_seq=56453 receive_seq=56453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.452 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=570541 sysload=0.07 cputime=143.150 memavail=1628808 print_time=3989.027 buffer_time=3.474 print_stall=0 extruder: target=215 temp=215.6 pwm=0.266
Stats 3977.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2021163 bytes_read=1034024 bytes_retransmit=9 bytes_invalid=0 send_seq=56468 receive_seq=56468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=570541 sysload=0.07 cputime=143.204 memavail=1628376 print_time=3989.027 buffer_time=2.473 print_stall=0 extruder: target=215 temp=215.3 pwm=0.496
Stats 3978.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2021649 bytes_read=1034401 bytes_retransmit=9 bytes_invalid=0 send_seq=56486 receive_seq=56486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=570601 sysload=0.06 cputime=143.262 memavail=1628620 print_time=3991.412 buffer_time=3.858 print_stall=0 extruder: target=215 temp=215.4 pwm=0.383
Stats 3979.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=2021879 bytes_read=1034808 bytes_retransmit=9 bytes_invalid=0 send_seq=56501 receive_seq=56501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.428 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=570601 sysload=0.06 cputime=143.317 memavail=1628540 print_time=3991.412 buffer_time=2.857 print_stall=0 extruder: target=215 temp=215.2 pwm=0.554
Stats 3980.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=2022268 bytes_read=1035189 bytes_retransmit=9 bytes_invalid=0 send_seq=56517 receive_seq=56517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.353 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=570662 sysload=0.06 cputime=143.377 memavail=1628568 print_time=3993.797 buffer_time=4.242 print_stall=0 extruder: target=215 temp=215.2 pwm=0.494
Stats 3981.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=2022550 bytes_read=1035551 bytes_retransmit=9 bytes_invalid=0 send_seq=56532 receive_seq=56532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.510 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=570662 sysload=0.06 cputime=143.432 memavail=1628552 print_time=3993.797 buffer_time=3.241 print_stall=0 extruder: target=215 temp=215.3 pwm=0.508
Stats 3982.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=2022768 bytes_read=1035954 bytes_retransmit=9 bytes_invalid=0 send_seq=56547 receive_seq=56547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=570662 sysload=0.06 cputime=143.483 memavail=1628812 print_time=3993.797 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.2 pwm=0.508
Stats 3983.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=2023255 bytes_read=1036340 bytes_retransmit=9 bytes_invalid=0 send_seq=56564 receive_seq=56564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=570720 sysload=0.06 cputime=143.526 memavail=1628828 print_time=3996.182 buffer_time=3.624 print_stall=0 extruder: target=215 temp=215.2 pwm=0.519
Stats 3984.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2023490 bytes_read=1036722 bytes_retransmit=9 bytes_invalid=0 send_seq=56580 receive_seq=56580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=570720 sysload=0.06 cputime=143.580 memavail=1629072 print_time=3996.182 buffer_time=2.624 print_stall=0 extruder: target=215 temp=215.3 pwm=0.473
Stats 3985.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2023949 bytes_read=1037124 bytes_retransmit=9 bytes_invalid=0 send_seq=56597 receive_seq=56597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=570782 sysload=0.06 cputime=143.637 memavail=1628892 print_time=3998.567 buffer_time=4.009 print_stall=0 extruder: target=215 temp=215.3 pwm=0.442
Stats 3986.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2024210 bytes_read=1037505 bytes_retransmit=9 bytes_invalid=0 send_seq=56613 receive_seq=56613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=570782 sysload=0.06 cputime=143.692 memavail=1629176 print_time=3998.567 buffer_time=3.008 print_stall=0 extruder: target=215 temp=215.4 pwm=0.354
Stats 3987.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2024461 bytes_read=1037867 bytes_retransmit=9 bytes_invalid=0 send_seq=56630 receive_seq=56630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.012 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=570782 sysload=0.06 cputime=143.744 memavail=1629372 print_time=3998.567 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.2 pwm=0.546
Stats 3988.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2024969 bytes_read=1038272 bytes_retransmit=9 bytes_invalid=0 send_seq=56650 receive_seq=56650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=570842 sysload=0.05 cputime=143.798 memavail=1629396 print_time=4000.952 buffer_time=3.391 print_stall=0 extruder: target=215 temp=215.3 pwm=0.464
Stats 3989.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=2025199 bytes_read=1038652 bytes_retransmit=9 bytes_invalid=0 send_seq=56665 receive_seq=56665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=570842 sysload=0.05 cputime=143.842 memavail=1629620 print_time=4000.952 buffer_time=2.391 print_stall=0 extruder: target=215 temp=215.2 pwm=0.499
Stats 3990.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=2025611 bytes_read=1039017 bytes_retransmit=9 bytes_invalid=0 send_seq=56682 receive_seq=56682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=570902 sysload=0.05 cputime=143.898 memavail=1629664 print_time=4001.586 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.3 pwm=0.440
Stats 3991.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=2026229 bytes_read=1039434 bytes_retransmit=9 bytes_invalid=0 send_seq=56702 receive_seq=56702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.342 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=571021 sysload=0.05 cputime=143.958 memavail=1629908 print_time=4002.854 buffer_time=2.292 print_stall=0 extruder: target=215 temp=215.3 pwm=0.466
Stats 3992.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=2026836 bytes_read=1039825 bytes_retransmit=9 bytes_invalid=0 send_seq=56720 receive_seq=56720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=571141 sysload=0.05 cputime=144.019 memavail=1629388 print_time=4004.123 buffer_time=2.560 print_stall=0 extruder: target=215 temp=215.2 pwm=0.466
Stats 3993.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=2027306 bytes_read=1040202 bytes_retransmit=9 bytes_invalid=0 send_seq=56738 receive_seq=56738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=571201 sysload=0.05 cputime=144.077 memavail=1629348 print_time=4004.757 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.2 pwm=0.517
Stats 3994.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2027954 bytes_read=1040644 bytes_retransmit=9 bytes_invalid=0 send_seq=56760 receive_seq=56760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=571317 sysload=0.05 cputime=144.124 memavail=1629096 print_time=4006.025 buffer_time=2.461 print_stall=0 extruder: target=215 temp=215.4 pwm=0.400
Stats 3995.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2028406 bytes_read=1041030 bytes_retransmit=9 bytes_invalid=0 send_seq=56777 receive_seq=56777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=571377 sysload=0.05 cputime=144.180 memavail=1628592 print_time=4006.659 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.1 pwm=0.588
Stats 3996.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2029055 bytes_read=1041422 bytes_retransmit=9 bytes_invalid=0 send_seq=56798 receive_seq=56798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=571497 sysload=0.05 cputime=144.239 memavail=1628884 print_time=4007.928 buffer_time=2.362 print_stall=0 extruder: target=215 temp=215.2 pwm=0.526
Stats 3997.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2029703 bytes_read=1041849 bytes_retransmit=9 bytes_invalid=0 send_seq=56820 receive_seq=56820 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=571617 sysload=0.05 cputime=144.295 memavail=1629160 print_time=4009.196 buffer_time=2.630 print_stall=0 extruder: target=215 temp=215.2 pwm=0.499
Stats 3998.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2030166 bytes_read=1042245 bytes_retransmit=9 bytes_invalid=0 send_seq=56839 receive_seq=56839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.8 pwm=0.825 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=571674 sysload=0.04 cputime=144.344 memavail=1628912 print_time=4009.830 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.4 pwm=0.374
Stats 3999.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2030753 bytes_read=1042642 bytes_retransmit=9 bytes_invalid=0 send_seq=56858 receive_seq=56858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.8 pwm=0.649 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=571790 sysload=0.04 cputime=144.400 memavail=1628960 print_time=4011.099 buffer_time=2.532 print_stall=0 extruder: target=215 temp=215.2 pwm=0.480
Stats 4000.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2031271 bytes_read=1043058 bytes_retransmit=9 bytes_invalid=0 send_seq=56875 receive_seq=56875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.161 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=571850 sysload=0.04 cputime=144.456 memavail=1629000 print_time=4011.733 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.1 pwm=0.480
Stats 4001.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2031916 bytes_read=1043450 bytes_retransmit=9 bytes_invalid=0 send_seq=56896 receive_seq=56896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.288 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=571970 sysload=0.04 cputime=144.515 memavail=1629732 print_time=4013.001 buffer_time=2.433 print_stall=0 extruder: target=215 temp=215.3 pwm=0.338
Stats 4002.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2032398 bytes_read=1043832 bytes_retransmit=9 bytes_invalid=0 send_seq=56915 receive_seq=56915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.240 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=572030 sysload=0.04 cputime=144.556 memavail=1629732 print_time=4013.635 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.2 pwm=0.506
Stats 4003.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2033031 bytes_read=1044268 bytes_retransmit=9 bytes_invalid=0 send_seq=56936 receive_seq=56936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.379 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=572147 sysload=0.04 cputime=144.616 memavail=1630008 print_time=4014.904 buffer_time=2.335 print_stall=0 extruder: target=215 temp=215.3 pwm=0.365
Stats 4004.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2033680 bytes_read=1044670 bytes_retransmit=9 bytes_invalid=0 send_seq=56956 receive_seq=56956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.018 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=572267 sysload=0.04 cputime=144.672 memavail=1629764 print_time=4016.172 buffer_time=2.603 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 4005.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2034153 bytes_read=1045042 bytes_retransmit=9 bytes_invalid=0 send_seq=56973 receive_seq=56973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.398 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=572327 sysload=0.04 cputime=144.715 memavail=1629528 print_time=4016.806 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 4006.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2034785 bytes_read=1045473 bytes_retransmit=9 bytes_invalid=0 send_seq=56993 receive_seq=56993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=572447 sysload=0.04 cputime=144.777 memavail=1629572 print_time=4018.075 buffer_time=2.504 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 4007.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2035256 bytes_read=1045840 bytes_retransmit=9 bytes_invalid=0 send_seq=57009 receive_seq=57009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.435 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=572506 sysload=0.04 cputime=144.828 memavail=1629352 print_time=4018.709 buffer_time=2.137 print_stall=0 extruder: target=215 temp=215.2 pwm=0.461
Stats 4008.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2036224 bytes_read=1046252 bytes_retransmit=9 bytes_invalid=0 send_seq=57034 receive_seq=57034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=572638 sysload=0.04 cputime=144.875 memavail=1629012 print_time=4020.228 buffer_time=2.656 print_stall=0 extruder: target=215 temp=215.2 pwm=0.391
Stats 4009.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2036673 bytes_read=1046688 bytes_retransmit=9 bytes_invalid=0 send_seq=57052 receive_seq=57052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.8 pwm=0.824 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=572698 sysload=0.04 cputime=144.931 memavail=1628760 print_time=4020.863 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.1 pwm=0.477
Stats 4010.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2037249 bytes_read=1047060 bytes_retransmit=9 bytes_invalid=0 send_seq=57069 receive_seq=57069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.086 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=572818 sysload=0.04 cputime=144.990 memavail=1629196 print_time=4022.131 buffer_time=2.558 print_stall=0 extruder: target=215 temp=215.2 pwm=0.380
Stats 4011.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2037796 bytes_read=1047442 bytes_retransmit=9 bytes_invalid=0 send_seq=57088 receive_seq=57088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.544 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=572877 sysload=0.04 cputime=145.043 memavail=1628668 print_time=4022.765 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 4012.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2038445 bytes_read=1047878 bytes_retransmit=9 bytes_invalid=0 send_seq=57109 receive_seq=57109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=572996 sysload=0.04 cputime=145.088 memavail=1628964 print_time=4024.033 buffer_time=2.459 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 4013.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2038913 bytes_read=1048255 bytes_retransmit=9 bytes_invalid=0 send_seq=57127 receive_seq=57127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=573055 sysload=0.03 cputime=145.143 memavail=1628956 print_time=4024.668 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.1 pwm=0.507
Stats 4014.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2039506 bytes_read=1048652 bytes_retransmit=9 bytes_invalid=0 send_seq=57146 receive_seq=57146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=573174 sysload=0.03 cputime=145.202 memavail=1628932 print_time=4025.936 buffer_time=2.361 print_stall=0 extruder: target=215 temp=215.2 pwm=0.396
Stats 4015.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2040121 bytes_read=1049078 bytes_retransmit=9 bytes_invalid=0 send_seq=57165 receive_seq=57165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=573293 sysload=0.03 cputime=145.260 memavail=1628896 print_time=4027.204 buffer_time=2.629 print_stall=0 extruder: target=215 temp=215.1 pwm=0.533
Stats 4016.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2040576 bytes_read=1049455 bytes_retransmit=9 bytes_invalid=0 send_seq=57183 receive_seq=57183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.8 pwm=0.844 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=573353 sysload=0.03 cputime=145.314 memavail=1629132 print_time=4027.839 buffer_time=2.263 print_stall=0 extruder: target=215 temp=214.9 pwm=0.585
Stats 4017.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2041155 bytes_read=1049842 bytes_retransmit=9 bytes_invalid=0 send_seq=57203 receive_seq=57203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.8 pwm=0.809 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=573467 sysload=0.03 cputime=145.367 memavail=1629692 print_time=4029.107 buffer_time=2.530 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 4018.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2041667 bytes_read=1050253 bytes_retransmit=9 bytes_invalid=0 send_seq=57219 receive_seq=57219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=573526 sysload=0.03 cputime=145.406 memavail=1629912 print_time=4029.741 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 4019.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2042210 bytes_read=1050635 bytes_retransmit=9 bytes_invalid=0 send_seq=57235 receive_seq=57235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.616 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=573645 sysload=0.03 cputime=145.457 memavail=1629972 print_time=4031.009 buffer_time=2.431 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 4020.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2042685 bytes_read=1051022 bytes_retransmit=9 bytes_invalid=0 send_seq=57252 receive_seq=57252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=573705 sysload=0.03 cputime=145.497 memavail=1629976 print_time=4031.644 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 4021.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2043297 bytes_read=1051428 bytes_retransmit=9 bytes_invalid=0 send_seq=57270 receive_seq=57270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=573824 sysload=0.03 cputime=145.550 memavail=1629228 print_time=4032.912 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 4022.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2043906 bytes_read=1051810 bytes_retransmit=9 bytes_invalid=0 send_seq=57289 receive_seq=57289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=573942 sysload=0.03 cputime=145.591 memavail=1628976 print_time=4034.180 buffer_time=2.601 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 4023.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2044351 bytes_read=1052202 bytes_retransmit=9 bytes_invalid=0 send_seq=57307 receive_seq=57307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.436 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=574002 sysload=0.03 cputime=145.632 memavail=1628964 print_time=4034.815 buffer_time=2.235 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 4024.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2044979 bytes_read=1052623 bytes_retransmit=9 bytes_invalid=0 send_seq=57325 receive_seq=57325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.745 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=574123 sysload=0.03 cputime=145.689 memavail=1628552 print_time=4036.083 buffer_time=2.502 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 4025.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2045432 bytes_read=1052995 bytes_retransmit=9 bytes_invalid=0 send_seq=57342 receive_seq=57342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=574185 sysload=0.03 cputime=145.743 memavail=1628784 print_time=4036.717 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.1 pwm=0.364
Stats 4026.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2046033 bytes_read=1053387 bytes_retransmit=9 bytes_invalid=0 send_seq=57360 receive_seq=57360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=574308 sysload=0.03 cputime=145.797 memavail=1628804 print_time=4037.986 buffer_time=2.403 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 4027.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2046612 bytes_read=1053788 bytes_retransmit=9 bytes_invalid=0 send_seq=57377 receive_seq=57377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=574368 sysload=0.03 cputime=145.852 memavail=1628784 print_time=4040.371 buffer_time=3.788 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 4028.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2046830 bytes_read=1054140 bytes_retransmit=9 bytes_invalid=0 send_seq=57390 receive_seq=57390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=574368 sysload=0.02 cputime=145.901 memavail=1628820 print_time=4040.371 buffer_time=2.787 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 4029.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2047280 bytes_read=1054542 bytes_retransmit=9 bytes_invalid=0 send_seq=57407 receive_seq=57407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=574429 sysload=0.02 cputime=145.957 memavail=1628760 print_time=4042.756 buffer_time=4.172 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 4030.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2047595 bytes_read=1054933 bytes_retransmit=9 bytes_invalid=0 send_seq=57422 receive_seq=57422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=574429 sysload=0.02 cputime=146.010 memavail=1628828 print_time=4042.756 buffer_time=3.171 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 4031.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2047772 bytes_read=1055275 bytes_retransmit=9 bytes_invalid=0 send_seq=57433 receive_seq=57433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=574429 sysload=0.02 cputime=146.056 memavail=1628476 print_time=4042.756 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 4032.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2048270 bytes_read=1055657 bytes_retransmit=9 bytes_invalid=0 send_seq=57449 receive_seq=57449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=574488 sysload=0.02 cputime=146.096 memavail=1628692 print_time=4045.141 buffer_time=3.555 print_stall=0 extruder: target=215 temp=215.1 pwm=0.399
Stats 4033.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2048521 bytes_read=1056048 bytes_retransmit=9 bytes_invalid=0 send_seq=57464 receive_seq=57464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.056 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=574488 sysload=0.02 cputime=146.151 memavail=1628680 print_time=4045.141 buffer_time=2.555 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 4034.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2049036 bytes_read=1056435 bytes_retransmit=9 bytes_invalid=0 send_seq=57481 receive_seq=57481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=574549 sysload=0.02 cputime=146.205 memavail=1628932 print_time=4047.526 buffer_time=3.939 print_stall=0 extruder: target=215 temp=214.8 pwm=0.563
Stats 4035.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2049274 bytes_read=1056812 bytes_retransmit=9 bytes_invalid=0 send_seq=57496 receive_seq=57496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.556 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=574549 sysload=0.02 cputime=146.259 memavail=1629244 print_time=4047.526 buffer_time=2.938 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 4036.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2049747 bytes_read=1057213 bytes_retransmit=9 bytes_invalid=0 send_seq=57513 receive_seq=57513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.428 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=574609 sysload=0.02 cputime=146.318 memavail=1629488 print_time=4049.911 buffer_time=4.323 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 4037.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2050082 bytes_read=1057580 bytes_retransmit=9 bytes_invalid=0 send_seq=57529 receive_seq=57529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.462 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=574609 sysload=0.02 cputime=146.371 memavail=1629748 print_time=4049.911 buffer_time=3.322 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 4038.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2050318 bytes_read=1057957 bytes_retransmit=9 bytes_invalid=0 send_seq=57544 receive_seq=57544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.443 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=574609 sysload=0.02 cputime=146.424 memavail=1629996 print_time=4049.911 buffer_time=2.322 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 4039.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2050843 bytes_read=1058373 bytes_retransmit=9 bytes_invalid=0 send_seq=57561 receive_seq=57561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=574671 sysload=0.02 cputime=146.483 memavail=1629692 print_time=4052.296 buffer_time=3.707 print_stall=0 extruder: target=215 temp=214.8 pwm=0.473
Stats 4040.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2051052 bytes_read=1058725 bytes_retransmit=9 bytes_invalid=0 send_seq=57574 receive_seq=57574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=574671 sysload=0.02 cputime=146.534 memavail=1629940 print_time=4052.296 buffer_time=2.706 print_stall=0 extruder: target=215 temp=215.0 pwm=0.408
Stats 4041.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2051547 bytes_read=1059117 bytes_retransmit=9 bytes_invalid=0 send_seq=57592 receive_seq=57592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.408 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=574731 sysload=0.02 cputime=146.590 memavail=1630004 print_time=4054.681 buffer_time=4.091 print_stall=0 extruder: target=215 temp=214.8 pwm=0.547
Stats 4042.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2051813 bytes_read=1059503 bytes_retransmit=9 bytes_invalid=0 send_seq=57606 receive_seq=57606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=574731 sysload=0.02 cputime=146.645 memavail=1630028 print_time=4054.681 buffer_time=3.090 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 4043.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2052050 bytes_read=1059860 bytes_retransmit=9 bytes_invalid=0 send_seq=57620 receive_seq=57620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.585 rpi: temp=54.5 mcu_temp: temp=41.4 sd_pos=574731 sysload=0.02 cputime=146.699 memavail=1630020 print_time=4054.681 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.315
Stats 4044.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2052562 bytes_read=1060283 bytes_retransmit=9 bytes_invalid=0 send_seq=57639 receive_seq=57639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=574793 sysload=0.02 cputime=146.753 memavail=1630032 print_time=4057.066 buffer_time=3.475 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 4045.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2052769 bytes_read=1060664 bytes_retransmit=9 bytes_invalid=0 send_seq=57652 receive_seq=57652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=574793 sysload=0.02 cputime=146.790 memavail=1629772 print_time=4057.066 buffer_time=2.474 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 4046.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2053371 bytes_read=1061036 bytes_retransmit=9 bytes_invalid=0 send_seq=57670 receive_seq=57670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.198 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=574914 sysload=0.02 cputime=146.852 memavail=1629520 print_time=4059.171 buffer_time=3.578 print_stall=0 extruder: target=215 temp=214.8 pwm=0.582
Stats 4047.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2053629 bytes_read=1061396 bytes_retransmit=9 bytes_invalid=0 send_seq=57684 receive_seq=57684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=574914 sysload=0.02 cputime=146.909 memavail=1629516 print_time=4059.171 buffer_time=2.578 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 4048.7: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2054122 bytes_read=1061780 bytes_retransmit=9 bytes_invalid=0 send_seq=57700 receive_seq=57700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=574975 sysload=0.02 cputime=146.972 memavail=1629516 print_time=4060.973 buffer_time=3.379 print_stall=0 extruder: target=215 temp=214.9 pwm=0.441
Stats 4049.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2054356 bytes_read=1062142 bytes_retransmit=9 bytes_invalid=0 send_seq=57714 receive_seq=57714 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=574975 sysload=0.02 cputime=147.027 memavail=1629500 print_time=4060.973 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.0 pwm=0.396
Stats 4050.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2054898 bytes_read=1062536 bytes_retransmit=9 bytes_invalid=0 send_seq=57733 receive_seq=57733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.084 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=575035 sysload=0.02 cputime=147.084 memavail=1629508 print_time=4062.774 buffer_time=3.180 print_stall=0 extruder: target=215 temp=215.1 pwm=0.373
Stats 4051.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2055128 bytes_read=1062917 bytes_retransmit=9 bytes_invalid=0 send_seq=57746 receive_seq=57746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.139 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=575035 sysload=0.02 cputime=147.143 memavail=1629252 print_time=4062.774 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.0 pwm=0.498
Stats 4052.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2055696 bytes_read=1063309 bytes_retransmit=9 bytes_invalid=0 send_seq=57767 receive_seq=57767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=575096 sysload=0.02 cputime=147.184 memavail=1629000 print_time=4064.575 buffer_time=2.980 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 4053.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2056167 bytes_read=1063701 bytes_retransmit=9 bytes_invalid=0 send_seq=57785 receive_seq=57785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=575156 sysload=0.02 cputime=147.242 memavail=1629024 print_time=4066.377 buffer_time=3.781 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 4054.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2056460 bytes_read=1064107 bytes_retransmit=9 bytes_invalid=0 send_seq=57800 receive_seq=57800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=575156 sysload=0.02 cputime=147.294 memavail=1628780 print_time=4066.377 buffer_time=2.780 print_stall=0 extruder: target=215 temp=215.1 pwm=0.389
Stats 4055.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2056924 bytes_read=1064479 bytes_retransmit=9 bytes_invalid=0 send_seq=57817 receive_seq=57817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=575217 sysload=0.02 cputime=147.334 memavail=1628784 print_time=4068.178 buffer_time=3.581 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 4056.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2057195 bytes_read=1064856 bytes_retransmit=9 bytes_invalid=0 send_seq=57832 receive_seq=57832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.655 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=575217 sysload=0.02 cputime=147.389 memavail=1628784 print_time=4068.178 buffer_time=2.580 print_stall=0 extruder: target=215 temp=215.1 pwm=0.429
Stats 4057.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2057742 bytes_read=1065267 bytes_retransmit=9 bytes_invalid=0 send_seq=57851 receive_seq=57851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=575277 sysload=0.02 cputime=147.444 memavail=1629032 print_time=4069.980 buffer_time=3.380 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 4058.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2057982 bytes_read=1065629 bytes_retransmit=9 bytes_invalid=0 send_seq=57866 receive_seq=57866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=575277 sysload=0.01 cputime=147.499 memavail=1629032 print_time=4069.980 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 4059.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=2058887 bytes_read=1066066 bytes_retransmit=9 bytes_invalid=0 send_seq=57890 receive_seq=57890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.086 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=575662 sysload=0.01 cputime=147.558 memavail=1629044 print_time=4072.049 buffer_time=3.448 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 4060.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=2059117 bytes_read=1066452 bytes_retransmit=9 bytes_invalid=0 send_seq=57904 receive_seq=57904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=575662 sysload=0.01 cputime=147.614 memavail=1629044 print_time=4072.049 buffer_time=2.447 print_stall=0 extruder: target=215 temp=215.1 pwm=0.436
Stats 4061.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=2059915 bytes_read=1066844 bytes_retransmit=9 bytes_invalid=0 send_seq=57925 receive_seq=57925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=576016 sysload=0.01 cputime=147.675 memavail=1628784 print_time=4072.693 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.0 pwm=0.541
Stats 4062.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=2060980 bytes_read=1067276 bytes_retransmit=9 bytes_invalid=0 send_seq=57951 receive_seq=57951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=576850 sysload=0.01 cputime=147.728 memavail=1628816 print_time=4073.850 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.2 pwm=0.376
Stats 4063.7: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=2062007 bytes_read=1067717 bytes_retransmit=9 bytes_invalid=0 send_seq=57976 receive_seq=57976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.448 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=577393 sysload=0.01 cputime=147.795 memavail=1629040 print_time=4074.690 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.2 pwm=0.367
Stats 4064.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2063072 bytes_read=1068154 bytes_retransmit=9 bytes_invalid=0 send_seq=58003 receive_seq=58003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.666 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=578279 sysload=0.01 cputime=147.861 memavail=1628576 print_time=4075.746 buffer_time=2.142 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 4065.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2063985 bytes_read=1068576 bytes_retransmit=9 bytes_invalid=0 send_seq=58027 receive_seq=58027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=578768 sysload=0.01 cputime=147.907 memavail=1628532 print_time=4076.616 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.2 pwm=0.383
Stats 4066.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2064924 bytes_read=1069012 bytes_retransmit=9 bytes_invalid=0 send_seq=58051 receive_seq=58051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=579532 sysload=0.01 cputime=147.976 memavail=1628556 print_time=4077.867 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.9 pwm=0.550
Stats 4067.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2065859 bytes_read=1069424 bytes_retransmit=9 bytes_invalid=0 send_seq=58076 receive_seq=58076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=580121 sysload=0.01 cputime=148.043 memavail=1628544 print_time=4078.741 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 4068.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2067143 bytes_read=1069891 bytes_retransmit=9 bytes_invalid=0 send_seq=58106 receive_seq=58106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=580509 sysload=0.01 cputime=148.111 memavail=1628984 print_time=4079.758 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 4069.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2068031 bytes_read=1070327 bytes_retransmit=9 bytes_invalid=0 send_seq=58130 receive_seq=58130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.485 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=580657 sysload=0.01 cputime=148.170 memavail=1628684 print_time=4080.608 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 4070.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2069233 bytes_read=1070769 bytes_retransmit=9 bytes_invalid=0 send_seq=58161 receive_seq=58161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=580857 sysload=0.01 cputime=148.216 memavail=1628436 print_time=4082.119 buffer_time=2.511 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 4071.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2069950 bytes_read=1071191 bytes_retransmit=9 bytes_invalid=0 send_seq=58182 receive_seq=58182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=580917 sysload=0.01 cputime=148.273 memavail=1628432 print_time=4082.671 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.7 pwm=0.537
Stats 4072.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2070941 bytes_read=1071627 bytes_retransmit=9 bytes_invalid=0 send_seq=58209 receive_seq=58209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=581034 sysload=0.01 cputime=148.315 memavail=1628752 print_time=4083.815 buffer_time=2.206 print_stall=0 extruder: target=215 temp=214.7 pwm=0.599
Stats 4073.7: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2071897 bytes_read=1072039 bytes_retransmit=9 bytes_invalid=0 send_seq=58234 receive_seq=58234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=581179 sysload=0.01 cputime=148.374 memavail=1629000 print_time=4085.003 buffer_time=2.394 print_stall=0 extruder: target=215 temp=214.7 pwm=0.538
Stats 4074.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=2072877 bytes_read=1072491 bytes_retransmit=9 bytes_invalid=0 send_seq=58258 receive_seq=58258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=581295 sysload=0.01 cputime=148.431 memavail=1628744 print_time=4086.198 buffer_time=2.588 print_stall=0 extruder: target=215 temp=214.6 pwm=0.538
Stats 4075.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=2073587 bytes_read=1072897 bytes_retransmit=9 bytes_invalid=0 send_seq=58279 receive_seq=58279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=581352 sysload=0.01 cputime=148.485 memavail=1628840 print_time=4086.797 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.6 pwm=0.508
Stats 4076.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=2074481 bytes_read=1073294 bytes_retransmit=9 bytes_invalid=0 send_seq=58301 receive_seq=58301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=581469 sysload=0.01 cputime=148.542 memavail=1628908 print_time=4087.994 buffer_time=2.384 print_stall=0 extruder: target=215 temp=214.7 pwm=0.508
Stats 4077.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=2075470 bytes_read=1073731 bytes_retransmit=9 bytes_invalid=0 send_seq=58325 receive_seq=58325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.087 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=581586 sysload=0.01 cputime=148.605 memavail=1628840 print_time=4089.154 buffer_time=2.543 print_stall=0 extruder: target=215 temp=214.5 pwm=0.647
Stats 4078.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=2076179 bytes_read=1074132 bytes_retransmit=9 bytes_invalid=0 send_seq=58345 receive_seq=58345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=581646 sysload=0.01 cputime=148.664 memavail=1628912 print_time=4089.720 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.8 pwm=0.403
Stats 4079.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=2077074 bytes_read=1074559 bytes_retransmit=9 bytes_invalid=0 send_seq=58370 receive_seq=58370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=581761 sysload=0.01 cputime=148.725 memavail=1629104 print_time=4090.786 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.8 pwm=0.514
Stats 4080.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=2077987 bytes_read=1075001 bytes_retransmit=9 bytes_invalid=0 send_seq=58395 receive_seq=58395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.464 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=581873 sysload=0.01 cputime=148.788 memavail=1628644 print_time=4091.738 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.8 pwm=0.562
Stats 4081.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=2079360 bytes_read=1075462 bytes_retransmit=9 bytes_invalid=0 send_seq=58427 receive_seq=58427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.024 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=582472 sysload=0.01 cputime=148.859 memavail=1628392 print_time=4093.039 buffer_time=2.425 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 4082.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=2080364 bytes_read=1075884 bytes_retransmit=9 bytes_invalid=0 send_seq=58454 receive_seq=58454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.166 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=583018 sysload=0.01 cputime=148.925 memavail=1628876 print_time=4093.648 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 4083.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000061 bytes_write=2081258 bytes_read=1076316 bytes_retransmit=9 bytes_invalid=0 send_seq=58477 receive_seq=58477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=583696 sysload=0.01 cputime=148.997 memavail=1629108 print_time=4094.709 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 4084.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2082694 bytes_read=1076792 bytes_retransmit=9 bytes_invalid=0 send_seq=58509 receive_seq=58509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=54.5 mcu_temp: temp=40.5 sd_pos=584760 sysload=0.01 cputime=149.074 memavail=1628884 print_time=4095.798 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 4085.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2083515 bytes_read=1077194 bytes_retransmit=9 bytes_invalid=0 send_seq=58532 receive_seq=58532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=585276 sysload=0.01 cputime=149.140 memavail=1629124 print_time=4096.702 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 4086.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2084731 bytes_read=1077651 bytes_retransmit=9 bytes_invalid=0 send_seq=58560 receive_seq=58560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=586283 sysload=0.01 cputime=149.220 memavail=1628928 print_time=4097.905 buffer_time=2.286 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 4087.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2085556 bytes_read=1078057 bytes_retransmit=9 bytes_invalid=0 send_seq=58581 receive_seq=58581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=10 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=586957 sysload=0.01 cputime=149.284 memavail=1628624 print_time=4098.974 buffer_time=2.355 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 4088.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=2086153 bytes_read=1078449 bytes_retransmit=9 bytes_invalid=0 send_seq=58602 receive_seq=58602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=587292 sysload=0.01 cputime=149.330 memavail=1628608 print_time=4099.784 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 4089.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2087360 bytes_read=1078926 bytes_retransmit=9 bytes_invalid=0 send_seq=58631 receive_seq=58631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=587642 sysload=0.01 cputime=149.392 memavail=1628600 print_time=4100.682 buffer_time=2.062 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 4090.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2088556 bytes_read=1079382 bytes_retransmit=9 bytes_invalid=0 send_seq=58662 receive_seq=58662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=587856 sysload=0.01 cputime=149.456 memavail=1628868 print_time=4102.007 buffer_time=2.387 print_stall=0 extruder: target=215 temp=214.7 pwm=0.593
Stats 4091.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2089433 bytes_read=1079794 bytes_retransmit=9 bytes_invalid=0 send_seq=58687 receive_seq=58687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=588008 sysload=0.01 cputime=149.518 memavail=1628768 print_time=4103.058 buffer_time=2.438 print_stall=0 extruder: target=215 temp=214.7 pwm=0.516
Stats 4092.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2090509 bytes_read=1080251 bytes_retransmit=9 bytes_invalid=0 send_seq=58715 receive_seq=58715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.428 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=588159 sysload=0.01 cputime=149.576 memavail=1629024 print_time=4104.165 buffer_time=2.544 print_stall=0 extruder: target=215 temp=214.5 pwm=0.547
Stats 4093.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2091200 bytes_read=1080662 bytes_retransmit=9 bytes_invalid=0 send_seq=58737 receive_seq=58737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=588217 sysload=0.01 cputime=149.617 memavail=1629260 print_time=4104.744 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.5 pwm=0.487
Stats 4094.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2092219 bytes_read=1081104 bytes_retransmit=9 bytes_invalid=0 send_seq=58765 receive_seq=58765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=588369 sysload=0.01 cputime=149.680 memavail=1629216 print_time=4105.932 buffer_time=2.310 print_stall=0 extruder: target=215 temp=214.3 pwm=0.638
Stats 4095.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2093273 bytes_read=1081561 bytes_retransmit=9 bytes_invalid=0 send_seq=58793 receive_seq=58793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=588490 sysload=0.01 cputime=149.747 memavail=1629324 print_time=4107.127 buffer_time=2.504 print_stall=0 extruder: target=215 temp=214.3 pwm=0.550
Stats 4096.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2093947 bytes_read=1081972 bytes_retransmit=9 bytes_invalid=0 send_seq=58815 receive_seq=58815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=588582 sysload=0.01 cputime=149.807 memavail=1629280 print_time=4107.724 buffer_time=2.101 print_stall=0 extruder: target=215 temp=214.2 pwm=0.550
Stats 4097.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2094932 bytes_read=1082394 bytes_retransmit=9 bytes_invalid=0 send_seq=58842 receive_seq=58842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.506 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=588733 sysload=0.01 cputime=149.867 memavail=1629352 print_time=4108.906 buffer_time=2.282 print_stall=0 extruder: target=215 temp=214.3 pwm=0.484
Stats 4098.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2095934 bytes_read=1082841 bytes_retransmit=9 bytes_invalid=0 send_seq=58868 receive_seq=58868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.585 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=588884 sysload=0.01 cputime=149.926 memavail=1629600 print_time=4110.049 buffer_time=2.424 print_stall=0 extruder: target=215 temp=214.2 pwm=0.633
Stats 4099.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2096930 bytes_read=1083297 bytes_retransmit=9 bytes_invalid=0 send_seq=58896 receive_seq=58896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=589036 sysload=0.01 cputime=149.985 memavail=1629352 print_time=4111.142 buffer_time=2.516 print_stall=0 extruder: target=215 temp=214.3 pwm=0.557
Stats 4100.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2097602 bytes_read=1083694 bytes_retransmit=9 bytes_invalid=0 send_seq=58918 receive_seq=58918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=589126 sysload=0.01 cputime=150.040 memavail=1629596 print_time=4111.657 buffer_time=2.031 print_stall=0 extruder: target=215 temp=214.4 pwm=0.529
Stats 4101.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2098709 bytes_read=1084146 bytes_retransmit=9 bytes_invalid=0 send_seq=58945 receive_seq=58945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.120 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=589425 sysload=0.01 cputime=150.107 memavail=1629676 print_time=4113.006 buffer_time=2.379 print_stall=0 extruder: target=215 temp=214.4 pwm=0.529
Stats 4102.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2099731 bytes_read=1084582 bytes_retransmit=9 bytes_invalid=0 send_seq=58972 receive_seq=58972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=589635 sysload=0.01 cputime=150.171 memavail=1629416 print_time=4113.722 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.5 pwm=0.527
Stats 4103.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2101135 bytes_read=1085034 bytes_retransmit=9 bytes_invalid=0 send_seq=59005 receive_seq=59005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=590210 sysload=0.09 cputime=150.235 memavail=1629404 print_time=4114.635 buffer_time=2.008 print_stall=0 extruder: target=215 temp=214.5 pwm=0.527
Stats 4104.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=2102137 bytes_read=1085501 bytes_retransmit=9 bytes_invalid=0 send_seq=59032 receive_seq=59032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=591072 sysload=0.09 cputime=150.313 memavail=1629436 print_time=4115.697 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.5 pwm=0.541
Stats 4105.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=2103339 bytes_read=1085957 bytes_retransmit=9 bytes_invalid=0 send_seq=59063 receive_seq=59063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=54.0 mcu_temp: temp=40.8 sd_pos=591867 sysload=0.09 cputime=150.384 memavail=1629444 print_time=4116.863 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.7 pwm=0.435
Stats 4106.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=2104366 bytes_read=1086386 bytes_retransmit=9 bytes_invalid=0 send_seq=59091 receive_seq=59091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.407 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=592639 sysload=0.09 cputime=150.438 memavail=1629460 print_time=4117.741 buffer_time=2.112 print_stall=0 extruder: target=215 temp=214.7 pwm=0.485
Stats 4107.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=2105451 bytes_read=1086821 bytes_retransmit=9 bytes_invalid=0 send_seq=59117 receive_seq=59117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=593363 sysload=0.09 cputime=150.507 memavail=1629460 print_time=4118.937 buffer_time=2.307 print_stall=0 extruder: target=215 temp=214.8 pwm=0.485
Stats 4108.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=2106206 bytes_read=1087226 bytes_retransmit=9 bytes_invalid=0 send_seq=59140 receive_seq=59140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=593867 sysload=0.08 cputime=150.573 memavail=1629192 print_time=4119.792 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 4109.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000065 bytes_write=2107406 bytes_read=1087663 bytes_retransmit=9 bytes_invalid=0 send_seq=59169 receive_seq=59169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.697 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=594749 sysload=0.08 cputime=150.645 memavail=1629192 print_time=4120.940 buffer_time=2.309 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 4110.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000065 bytes_write=2108591 bytes_read=1088125 bytes_retransmit=9 bytes_invalid=0 send_seq=59198 receive_seq=59198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.336 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=595132 sysload=0.08 cputime=150.691 memavail=1629196 print_time=4121.952 buffer_time=2.320 print_stall=0 extruder: target=215 temp=214.9 pwm=0.414
Stats 4111.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000065 bytes_write=2109458 bytes_read=1088556 bytes_retransmit=9 bytes_invalid=0 send_seq=59224 receive_seq=59224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=595284 sysload=0.08 cputime=150.752 memavail=1629456 print_time=4122.850 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.9 pwm=0.449
Stats 4112.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000065 bytes_write=2110360 bytes_read=1088968 bytes_retransmit=9 bytes_invalid=0 send_seq=59249 receive_seq=59249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=595431 sysload=0.08 cputime=150.808 memavail=1629452 print_time=4123.899 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.7 pwm=0.570
Stats 4113.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000065 bytes_write=2111349 bytes_read=1089415 bytes_retransmit=9 bytes_invalid=0 send_seq=59275 receive_seq=59275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=56.5 mcu_temp: temp=40.1 sd_pos=595581 sysload=0.07 cputime=150.871 memavail=1629456 print_time=4125.055 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.7 pwm=0.541
Stats 4114.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2112074 bytes_read=1089856 bytes_retransmit=9 bytes_invalid=0 send_seq=59300 receive_seq=59300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.103 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=595641 sysload=0.07 cputime=150.918 memavail=1629464 print_time=4125.655 buffer_time=2.021 print_stall=0 extruder: target=215 temp=214.9 pwm=0.439
Stats 4115.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2113121 bytes_read=1090278 bytes_retransmit=9 bytes_invalid=0 send_seq=59327 receive_seq=59327 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=595763 sysload=0.07 cputime=150.980 memavail=1629672 print_time=4126.891 buffer_time=2.257 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 4116.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2114083 bytes_read=1090715 bytes_retransmit=9 bytes_invalid=0 send_seq=59351 receive_seq=59351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.462 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=595913 sysload=0.07 cputime=151.038 memavail=1629696 print_time=4128.149 buffer_time=2.514 print_stall=0 extruder: target=215 temp=214.7 pwm=0.576
Stats 4117.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2114753 bytes_read=1091131 bytes_retransmit=9 bytes_invalid=0 send_seq=59374 receive_seq=59374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=595975 sysload=0.07 cputime=151.082 memavail=1629720 print_time=4128.779 buffer_time=2.143 print_stall=0 extruder: target=215 temp=214.8 pwm=0.516
Stats 4118.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2115734 bytes_read=1091553 bytes_retransmit=9 bytes_invalid=0 send_seq=59401 receive_seq=59401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.680 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=596095 sysload=0.07 cputime=151.141 memavail=1629444 print_time=4130.034 buffer_time=2.397 print_stall=0 extruder: target=215 temp=214.7 pwm=0.603
Stats 4119.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2116413 bytes_read=1091995 bytes_retransmit=9 bytes_invalid=0 send_seq=59423 receive_seq=59423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=596184 sysload=0.07 cputime=151.197 memavail=1629460 print_time=4130.649 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.9 pwm=0.431
Stats 4120.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2117465 bytes_read=1092446 bytes_retransmit=9 bytes_invalid=0 send_seq=59453 receive_seq=59453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=596306 sysload=0.07 cputime=151.257 memavail=1629492 print_time=4131.836 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.0 pwm=0.389
Stats 4121.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2118359 bytes_read=1092858 bytes_retransmit=9 bytes_invalid=0 send_seq=59478 receive_seq=59478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=596426 sysload=0.07 cputime=151.312 memavail=1629168 print_time=4132.935 buffer_time=2.295 print_stall=0 extruder: target=215 temp=214.6 pwm=0.648
Stats 4122.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2119300 bytes_read=1093300 bytes_retransmit=9 bytes_invalid=0 send_seq=59503 receive_seq=59503 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.542 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=596602 sysload=0.07 cputime=151.355 memavail=1629468 print_time=4133.917 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 4123.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2120152 bytes_read=1093726 bytes_retransmit=9 bytes_invalid=0 send_seq=59528 receive_seq=59528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=596751 sysload=0.06 cputime=151.412 memavail=1629464 print_time=4134.675 buffer_time=2.035 print_stall=0 extruder: target=215 temp=214.8 pwm=0.567
Stats 4124.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2122102 bytes_read=1094243 bytes_retransmit=9 bytes_invalid=0 send_seq=59571 receive_seq=59571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=597263 sysload=0.06 cputime=151.476 memavail=1629720 print_time=4135.886 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.9 pwm=0.461
Stats 4125.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2122707 bytes_read=1094650 bytes_retransmit=9 bytes_invalid=0 send_seq=59589 receive_seq=59589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.470 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=597323 sysload=0.06 cputime=151.534 memavail=1629716 print_time=4137.656 buffer_time=3.014 print_stall=0 extruder: target=215 temp=214.9 pwm=0.461
Stats 4126.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2122894 bytes_read=1095016 bytes_retransmit=9 bytes_invalid=0 send_seq=59602 receive_seq=59602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=597323 sysload=0.06 cputime=151.584 memavail=1629708 print_time=4137.656 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 4127.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2123420 bytes_read=1095403 bytes_retransmit=9 bytes_invalid=0 send_seq=59622 receive_seq=59622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=597383 sysload=0.06 cputime=151.639 memavail=1629740 print_time=4139.457 buffer_time=2.815 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 4128.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2123916 bytes_read=1095815 bytes_retransmit=9 bytes_invalid=0 send_seq=59641 receive_seq=59641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=597442 sysload=0.06 cputime=151.695 memavail=1629740 print_time=4141.259 buffer_time=3.615 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 4129.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2124214 bytes_read=1096226 bytes_retransmit=9 bytes_invalid=0 send_seq=59660 receive_seq=59660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=597442 sysload=0.06 cputime=151.749 memavail=1629204 print_time=4141.259 buffer_time=2.615 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 4130.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2124752 bytes_read=1096608 bytes_retransmit=9 bytes_invalid=0 send_seq=59679 receive_seq=59679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=597502 sysload=0.06 cputime=151.804 memavail=1629212 print_time=4143.060 buffer_time=3.416 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 4131.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2124993 bytes_read=1097000 bytes_retransmit=9 bytes_invalid=0 send_seq=59694 receive_seq=59694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.644 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=597502 sysload=0.06 cputime=151.856 memavail=1628456 print_time=4143.060 buffer_time=2.415 print_stall=0 extruder: target=215 temp=215.3 pwm=0.455
Stats 4132.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2125532 bytes_read=1097396 bytes_retransmit=9 bytes_invalid=0 send_seq=59713 receive_seq=59713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=597561 sysload=0.06 cputime=151.910 memavail=1628728 print_time=4144.861 buffer_time=3.216 print_stall=0 extruder: target=215 temp=215.4 pwm=0.375
Stats 4133.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2125772 bytes_read=1097758 bytes_retransmit=9 bytes_invalid=0 send_seq=59728 receive_seq=59728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=597561 sysload=0.05 cputime=151.966 memavail=1628984 print_time=4144.861 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.6 pwm=0.323
Stats 4134.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2126323 bytes_read=1098185 bytes_retransmit=9 bytes_invalid=0 send_seq=59747 receive_seq=59747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.414 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=597620 sysload=0.05 cputime=152.022 memavail=1628920 print_time=4146.663 buffer_time=3.016 print_stall=0 extruder: target=215 temp=215.4 pwm=0.492
Stats 4135.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2126556 bytes_read=1098566 bytes_retransmit=9 bytes_invalid=0 send_seq=59763 receive_seq=59763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=597620 sysload=0.05 cputime=152.076 memavail=1628664 print_time=4146.663 buffer_time=2.015 print_stall=0 extruder: target=215 temp=215.7 pwm=0.308
Stats 4136.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2127111 bytes_read=1098958 bytes_retransmit=9 bytes_invalid=0 send_seq=59784 receive_seq=59784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=597679 sysload=0.05 cputime=152.127 memavail=1628680 print_time=4148.464 buffer_time=2.816 print_stall=0 extruder: target=215 temp=215.6 pwm=0.465
Stats 4137.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2127577 bytes_read=1099370 bytes_retransmit=9 bytes_invalid=0 send_seq=59803 receive_seq=59803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=597738 sysload=0.05 cputime=152.171 memavail=1628904 print_time=4150.266 buffer_time=3.616 print_stall=0 extruder: target=215 temp=215.7 pwm=0.478
Stats 4138.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2127874 bytes_read=1099751 bytes_retransmit=9 bytes_invalid=0 send_seq=59819 receive_seq=59819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=597738 sysload=0.05 cputime=152.223 memavail=1628956 print_time=4150.266 buffer_time=2.616 print_stall=0 extruder: target=215 temp=215.8 pwm=0.398
Stats 4139.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2128449 bytes_read=1100143 bytes_retransmit=9 bytes_invalid=0 send_seq=59837 receive_seq=59837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.604 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=597798 sysload=0.05 cputime=152.284 memavail=1628944 print_time=4151.616 buffer_time=2.966 print_stall=0 extruder: target=215 temp=215.7 pwm=0.450
Stats 4140.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2128791 bytes_read=1100540 bytes_retransmit=9 bytes_invalid=0 send_seq=59853 receive_seq=59853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=597860 sysload=0.05 cputime=152.339 memavail=1629188 print_time=4152.955 buffer_time=3.304 print_stall=0 extruder: target=215 temp=215.8 pwm=0.392
Stats 4141.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2129113 bytes_read=1100926 bytes_retransmit=9 bytes_invalid=0 send_seq=59870 receive_seq=59870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.421 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=597860 sysload=0.05 cputime=152.394 memavail=1628776 print_time=4152.955 buffer_time=2.304 print_stall=0 extruder: target=215 temp=215.8 pwm=0.405
Stats 4142.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2129558 bytes_read=1101298 bytes_retransmit=9 bytes_invalid=0 send_seq=59887 receive_seq=59887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.371 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=597860 sysload=0.05 cputime=152.450 memavail=1629152 print_time=4154.001 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.6 pwm=0.504
Stats 4143.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2129893 bytes_read=1101685 bytes_retransmit=9 bytes_invalid=0 send_seq=59901 receive_seq=59901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.1 sd_pos=597921 sysload=0.04 cputime=152.504 memavail=1629116 print_time=4155.340 buffer_time=2.688 print_stall=0 extruder: target=215 temp=215.6 pwm=0.495
Stats 4144.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2130389 bytes_read=1102091 bytes_retransmit=9 bytes_invalid=0 send_seq=59919 receive_seq=59919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=597921 sysload=0.04 cputime=152.559 memavail=1629644 print_time=4156.386 buffer_time=2.734 print_stall=0 extruder: target=215 temp=215.4 pwm=0.535
Stats 4145.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2130694 bytes_read=1102448 bytes_retransmit=9 bytes_invalid=0 send_seq=59933 receive_seq=59933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.378 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=597983 sysload=0.04 cputime=152.611 memavail=1629892 print_time=4157.725 buffer_time=3.072 print_stall=0 extruder: target=215 temp=215.7 pwm=0.297
Stats 4146.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2131015 bytes_read=1102845 bytes_retransmit=9 bytes_invalid=0 send_seq=59949 receive_seq=59949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=597983 sysload=0.04 cputime=152.667 memavail=1629660 print_time=4157.725 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.3 pwm=0.592
Stats 4147.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2131488 bytes_read=1103241 bytes_retransmit=9 bytes_invalid=0 send_seq=59968 receive_seq=59968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=597983 sysload=0.04 cputime=152.723 memavail=1629908 print_time=4158.772 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.2 pwm=0.497
Stats 4148.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2131851 bytes_read=1103618 bytes_retransmit=9 bytes_invalid=0 send_seq=59986 receive_seq=59986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=598045 sysload=0.04 cputime=152.779 memavail=1629652 print_time=4160.110 buffer_time=2.455 print_stall=0 extruder: target=215 temp=215.3 pwm=0.390
Stats 4149.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2132345 bytes_read=1104040 bytes_retransmit=9 bytes_invalid=0 send_seq=60004 receive_seq=60004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=598045 sysload=0.04 cputime=152.819 memavail=1629916 print_time=4161.157 buffer_time=2.500 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 4150.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2132713 bytes_read=1104426 bytes_retransmit=9 bytes_invalid=0 send_seq=60021 receive_seq=60021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.107 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=598106 sysload=0.04 cputime=152.873 memavail=1629664 print_time=4162.495 buffer_time=2.838 print_stall=0 extruder: target=215 temp=215.2 pwm=0.358
Stats 4151.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2133090 bytes_read=1104798 bytes_retransmit=9 bytes_invalid=0 send_seq=60038 receive_seq=60038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=598106 sysload=0.04 cputime=152.928 memavail=1629652 print_time=4163.542 buffer_time=2.884 print_stall=0 extruder: target=215 temp=215.1 pwm=0.519
Stats 4152.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2133506 bytes_read=1105205 bytes_retransmit=9 bytes_invalid=0 send_seq=60056 receive_seq=60056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=598166 sysload=0.04 cputime=152.985 memavail=1630172 print_time=4164.880 buffer_time=3.222 print_stall=0 extruder: target=215 temp=215.1 pwm=0.501
Stats 4153.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2133763 bytes_read=1105581 bytes_retransmit=9 bytes_invalid=0 send_seq=60071 receive_seq=60071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.528 rpi: temp=54.5 mcu_temp: temp=40.4 sd_pos=598166 sysload=0.04 cputime=153.038 memavail=1629652 print_time=4164.880 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.1 pwm=0.521
Stats 4154.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2134252 bytes_read=1105973 bytes_retransmit=9 bytes_invalid=0 send_seq=60089 receive_seq=60089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.070 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=598166 sysload=0.04 cputime=153.092 memavail=1629648 print_time=4165.927 buffer_time=2.267 print_stall=0 extruder: target=215 temp=215.0 pwm=0.563
Stats 4155.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2134611 bytes_read=1106370 bytes_retransmit=9 bytes_invalid=0 send_seq=60105 receive_seq=60105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=598228 sysload=0.04 cputime=153.148 memavail=1629672 print_time=4167.265 buffer_time=2.604 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 4156.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2135054 bytes_read=1106761 bytes_retransmit=9 bytes_invalid=0 send_seq=60123 receive_seq=60123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.5 sd_pos=598228 sysload=0.04 cputime=153.205 memavail=1629128 print_time=4168.312 buffer_time=2.651 print_stall=0 extruder: target=215 temp=215.2 pwm=0.372
Stats 4157.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2135402 bytes_read=1107128 bytes_retransmit=9 bytes_invalid=0 send_seq=60139 receive_seq=60139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=598290 sysload=0.04 cputime=153.263 memavail=1628908 print_time=4169.650 buffer_time=2.988 print_stall=0 extruder: target=215 temp=215.1 pwm=0.515
Stats 4158.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2135818 bytes_read=1107535 bytes_retransmit=9 bytes_invalid=0 send_seq=60157 receive_seq=60157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=598352 sysload=0.03 cputime=153.323 memavail=1628668 print_time=4170.284 buffer_time=2.622 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 4159.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2136392 bytes_read=1107956 bytes_retransmit=9 bytes_invalid=0 send_seq=60178 receive_seq=60178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=598413 sysload=0.03 cputime=153.383 memavail=1628908 print_time=4170.918 buffer_time=2.256 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 4160.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2137057 bytes_read=1108343 bytes_retransmit=9 bytes_invalid=0 send_seq=60198 receive_seq=60198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=598537 sysload=0.03 cputime=153.442 memavail=1628948 print_time=4172.187 buffer_time=2.524 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 4161.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2137588 bytes_read=1108760 bytes_retransmit=9 bytes_invalid=0 send_seq=60218 receive_seq=60218 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=598599 sysload=0.03 cputime=153.501 memavail=1629176 print_time=4172.821 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 4162.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2138254 bytes_read=1109176 bytes_retransmit=9 bytes_invalid=0 send_seq=60241 receive_seq=60241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=598722 sysload=0.03 cputime=153.555 memavail=1629228 print_time=4174.089 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 4163.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=2138757 bytes_read=1109553 bytes_retransmit=9 bytes_invalid=0 send_seq=60259 receive_seq=60259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=598781 sysload=0.03 cputime=153.612 memavail=1629212 print_time=4174.723 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 4164.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2139487 bytes_read=1110009 bytes_retransmit=9 bytes_invalid=0 send_seq=60281 receive_seq=60281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=598905 sysload=0.03 cputime=153.669 memavail=1629244 print_time=4175.992 buffer_time=2.322 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 4165.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2140112 bytes_read=1110383 bytes_retransmit=9 bytes_invalid=0 send_seq=60299 receive_seq=60299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.500 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=599029 sysload=0.03 cputime=153.721 memavail=1629468 print_time=4177.260 buffer_time=2.589 print_stall=0 extruder: target=215 temp=214.8 pwm=0.550
Stats 4166.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2140647 bytes_read=1110760 bytes_retransmit=9 bytes_invalid=0 send_seq=60320 receive_seq=60319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=599091 sysload=0.03 cputime=153.763 memavail=1629728 print_time=4177.894 buffer_time=2.223 print_stall=0 extruder: target=215 temp=214.7 pwm=0.596
Stats 4167.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2141326 bytes_read=1111192 bytes_retransmit=9 bytes_invalid=0 send_seq=60340 receive_seq=60340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=57.5 mcu_temp: temp=41.5 sd_pos=599207 sysload=0.03 cputime=153.803 memavail=1630088 print_time=4179.163 buffer_time=2.490 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 4168.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2141816 bytes_read=1111559 bytes_retransmit=9 bytes_invalid=0 send_seq=60358 receive_seq=60358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.214 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=599267 sysload=0.03 cputime=153.860 memavail=1629768 print_time=4179.797 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 4169.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2142499 bytes_read=1111966 bytes_retransmit=9 bytes_invalid=0 send_seq=60380 receive_seq=60380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.259 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=599387 sysload=0.03 cputime=153.918 memavail=1629492 print_time=4181.065 buffer_time=2.391 print_stall=0 extruder: target=215 temp=215.0 pwm=0.427
Stats 4170.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2143037 bytes_read=1112392 bytes_retransmit=9 bytes_invalid=0 send_seq=60399 receive_seq=60399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.179 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=599447 sysload=0.03 cputime=153.977 memavail=1629196 print_time=4181.699 buffer_time=2.024 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 4171.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2143741 bytes_read=1112794 bytes_retransmit=9 bytes_invalid=0 send_seq=60422 receive_seq=60422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.526 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=599565 sysload=0.03 cputime=154.041 memavail=1628560 print_time=4182.968 buffer_time=2.292 print_stall=0 extruder: target=215 temp=214.9 pwm=0.456
Stats 4172.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2144392 bytes_read=1113191 bytes_retransmit=9 bytes_invalid=0 send_seq=60444 receive_seq=60444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=599684 sysload=0.03 cputime=154.081 memavail=1628620 print_time=4184.236 buffer_time=2.560 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 4173.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2144932 bytes_read=1113617 bytes_retransmit=9 bytes_invalid=0 send_seq=60463 receive_seq=60463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.188 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=599744 sysload=0.02 cputime=154.140 memavail=1628616 print_time=4184.870 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 4174.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2145614 bytes_read=1114034 bytes_retransmit=9 bytes_invalid=0 send_seq=60486 receive_seq=60486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=599864 sysload=0.02 cputime=154.198 memavail=1628592 print_time=4186.139 buffer_time=2.462 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 4175.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2146145 bytes_read=1114431 bytes_retransmit=9 bytes_invalid=0 send_seq=60505 receive_seq=60505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=599924 sysload=0.02 cputime=154.254 memavail=1628864 print_time=4186.773 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 4176.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2146822 bytes_read=1114852 bytes_retransmit=9 bytes_invalid=0 send_seq=60526 receive_seq=60526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=0.880 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=600055 sysload=0.02 cputime=154.294 memavail=1628524 print_time=4188.050 buffer_time=2.372 print_stall=0 extruder: target=215 temp=215.3 pwm=0.352
Stats 4177.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2147683 bytes_read=1115264 bytes_retransmit=9 bytes_invalid=0 send_seq=60551 receive_seq=60551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=600115 sysload=0.02 cputime=154.354 memavail=1628536 print_time=4188.927 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.2 pwm=0.404
Stats 4178.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2148342 bytes_read=1115666 bytes_retransmit=9 bytes_invalid=0 send_seq=60571 receive_seq=60571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=600235 sysload=0.02 cputime=154.416 memavail=1628600 print_time=4190.195 buffer_time=2.515 print_stall=0 extruder: target=215 temp=215.1 pwm=0.477
Stats 4179.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2148875 bytes_read=1116087 bytes_retransmit=9 bytes_invalid=0 send_seq=60589 receive_seq=60589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=600295 sysload=0.02 cputime=154.475 memavail=1628568 print_time=4190.829 buffer_time=2.148 print_stall=0 extruder: target=215 temp=215.2 pwm=0.468
Stats 4180.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2149571 bytes_read=1116489 bytes_retransmit=9 bytes_invalid=0 send_seq=60612 receive_seq=60612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.365 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=600414 sysload=0.02 cputime=154.533 memavail=1628808 print_time=4192.097 buffer_time=2.415 print_stall=0 extruder: target=215 temp=215.0 pwm=0.570
Stats 4181.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2150047 bytes_read=1116871 bytes_retransmit=9 bytes_invalid=0 send_seq=60628 receive_seq=60628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=600473 sysload=0.02 cputime=154.593 memavail=1628828 print_time=4192.732 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 4182.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2150737 bytes_read=1117292 bytes_retransmit=9 bytes_invalid=0 send_seq=60649 receive_seq=60649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=600592 sysload=0.02 cputime=154.634 memavail=1629076 print_time=4194.000 buffer_time=2.316 print_stall=0 extruder: target=215 temp=215.0 pwm=0.560
Stats 4183.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2151388 bytes_read=1117684 bytes_retransmit=9 bytes_invalid=0 send_seq=60670 receive_seq=60670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=600711 sysload=0.10 cputime=154.690 memavail=1629072 print_time=4195.268 buffer_time=2.584 print_stall=0 extruder: target=215 temp=215.4 pwm=0.270
Stats 4184.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2151912 bytes_read=1118096 bytes_retransmit=9 bytes_invalid=0 send_seq=60689 receive_seq=60689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.562 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=600770 sysload=0.10 cputime=154.749 memavail=1629340 print_time=4195.903 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.2 pwm=0.388
Stats 4185.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2152589 bytes_read=1118512 bytes_retransmit=9 bytes_invalid=0 send_seq=60709 receive_seq=60709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=600887 sysload=0.10 cputime=154.809 memavail=1629312 print_time=4197.171 buffer_time=2.485 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 4186.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2153094 bytes_read=1118894 bytes_retransmit=9 bytes_invalid=0 send_seq=60728 receive_seq=60728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=600943 sysload=0.10 cputime=154.865 memavail=1629536 print_time=4197.805 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 4187.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2153728 bytes_read=1119301 bytes_retransmit=9 bytes_invalid=0 send_seq=60749 receive_seq=60749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=601058 sysload=0.10 cputime=154.922 memavail=1629536 print_time=4199.074 buffer_time=2.386 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 4188.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2154246 bytes_read=1119712 bytes_retransmit=9 bytes_invalid=0 send_seq=60768 receive_seq=60768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=601115 sysload=0.09 cputime=154.962 memavail=1630064 print_time=4199.708 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 4189.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2154969 bytes_read=1120129 bytes_retransmit=9 bytes_invalid=0 send_seq=60791 receive_seq=60791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=601231 sysload=0.09 cputime=155.023 memavail=1630012 print_time=4200.976 buffer_time=2.287 print_stall=0 extruder: target=215 temp=215.1 pwm=0.504
Stats 4190.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2155613 bytes_read=1120536 bytes_retransmit=9 bytes_invalid=0 send_seq=60812 receive_seq=60812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=601345 sysload=0.09 cputime=155.081 memavail=1630040 print_time=4202.244 buffer_time=2.555 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 4191.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2156113 bytes_read=1120937 bytes_retransmit=9 bytes_invalid=0 send_seq=60829 receive_seq=60829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=601402 sysload=0.09 cputime=155.135 memavail=1630056 print_time=4202.879 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.2 pwm=0.410
Stats 4192.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2156736 bytes_read=1121329 bytes_retransmit=9 bytes_invalid=0 send_seq=60850 receive_seq=60850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=601517 sysload=0.09 cputime=155.192 memavail=1629804 print_time=4204.147 buffer_time=2.457 print_stall=0 extruder: target=215 temp=215.1 pwm=0.510
Stats 4193.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2157265 bytes_read=1121726 bytes_retransmit=9 bytes_invalid=0 send_seq=60869 receive_seq=60869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=601577 sysload=0.17 cputime=155.249 memavail=1629800 print_time=4204.781 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 4194.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=2157947 bytes_read=1122167 bytes_retransmit=9 bytes_invalid=0 send_seq=60891 receive_seq=60891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=601697 sysload=0.17 cputime=155.309 memavail=1630024 print_time=4206.050 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.0 pwm=0.575
Stats 4195.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=2158721 bytes_read=1122574 bytes_retransmit=9 bytes_invalid=0 send_seq=60915 receive_seq=60915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=601816 sysload=0.17 cputime=155.370 memavail=1630084 print_time=4209.069 buffer_time=4.377 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 4196.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=2159043 bytes_read=1122951 bytes_retransmit=9 bytes_invalid=0 send_seq=60930 receive_seq=60930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.525 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=601816 sysload=0.17 cputime=155.422 memavail=1630068 print_time=4209.069 buffer_time=3.376 print_stall=0 extruder: target=215 temp=215.1 pwm=0.481
Stats 4197.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=2159267 bytes_read=1123337 bytes_retransmit=9 bytes_invalid=0 send_seq=60944 receive_seq=60944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=601816 sysload=0.17 cputime=155.476 memavail=1629588 print_time=4209.069 buffer_time=2.376 print_stall=0 extruder: target=215 temp=215.1 pwm=0.508
Stats 4198.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000050 bytes_write=2159845 bytes_read=1123724 bytes_retransmit=9 bytes_invalid=0 send_seq=60964 receive_seq=60964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=601875 sysload=0.23 cputime=155.532 memavail=1629476 print_time=4211.454 buffer_time=3.760 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 4199.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=2160035 bytes_read=1124101 bytes_retransmit=9 bytes_invalid=0 send_seq=60976 receive_seq=60976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=601875 sysload=0.23 cputime=155.585 memavail=1629252 print_time=4211.454 buffer_time=2.759 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 4200.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=2160563 bytes_read=1124512 bytes_retransmit=9 bytes_invalid=0 send_seq=60995 receive_seq=60995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.594 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=601934 sysload=0.23 cputime=155.641 memavail=1629228 print_time=4213.839 buffer_time=4.144 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 4201.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=2160839 bytes_read=1124884 bytes_retransmit=9 bytes_invalid=0 send_seq=61012 receive_seq=61012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=601934 sysload=0.23 cputime=155.694 memavail=1629520 print_time=4213.839 buffer_time=3.143 print_stall=0 extruder: target=215 temp=215.2 pwm=0.473
Stats 4202.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=2161056 bytes_read=1125251 bytes_retransmit=9 bytes_invalid=0 send_seq=61025 receive_seq=61025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=601934 sysload=0.23 cputime=155.745 memavail=1629284 print_time=4213.839 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 4203.8: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=2161667 bytes_read=1125672 bytes_retransmit=9 bytes_invalid=0 send_seq=61046 receive_seq=61046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=601993 sysload=0.21 cputime=155.802 memavail=1629228 print_time=4216.224 buffer_time=3.527 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 4204.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2161883 bytes_read=1126049 bytes_retransmit=9 bytes_invalid=0 send_seq=61061 receive_seq=61061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=601993 sysload=0.21 cputime=155.852 memavail=1629324 print_time=4216.224 buffer_time=2.526 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 4205.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2162420 bytes_read=1126441 bytes_retransmit=9 bytes_invalid=0 send_seq=61079 receive_seq=61079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=602053 sysload=0.21 cputime=155.910 memavail=1629576 print_time=4218.609 buffer_time=3.910 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 4206.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2162613 bytes_read=1126817 bytes_retransmit=9 bytes_invalid=0 send_seq=61091 receive_seq=61091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=602053 sysload=0.21 cputime=155.963 memavail=1629572 print_time=4218.609 buffer_time=2.910 print_stall=0 extruder: target=215 temp=215.1 pwm=0.380
Stats 4207.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2163095 bytes_read=1127199 bytes_retransmit=9 bytes_invalid=0 send_seq=61110 receive_seq=61110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=602113 sysload=0.21 cputime=156.021 memavail=1629776 print_time=4220.994 buffer_time=4.294 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 4208.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2163383 bytes_read=1127581 bytes_retransmit=9 bytes_invalid=0 send_seq=61126 receive_seq=61126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=602113 sysload=0.20 cputime=156.076 memavail=1630016 print_time=4220.994 buffer_time=3.294 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 4209.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2163586 bytes_read=1127972 bytes_retransmit=9 bytes_invalid=0 send_seq=61138 receive_seq=61138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.005 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=602113 sysload=0.20 cputime=156.127 memavail=1629856 print_time=4220.994 buffer_time=2.293 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 4210.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2164130 bytes_read=1128349 bytes_retransmit=9 bytes_invalid=0 send_seq=61156 receive_seq=61156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.582 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=602173 sysload=0.20 cputime=156.183 memavail=1629904 print_time=4223.379 buffer_time=3.678 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 4211.8: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2164337 bytes_read=1128716 bytes_retransmit=9 bytes_invalid=0 send_seq=61169 receive_seq=61169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=602173 sysload=0.20 cputime=156.232 memavail=1629712 print_time=4223.379 buffer_time=2.677 print_stall=0 extruder: target=215 temp=215.1 pwm=0.399
Stats 4212.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2164916 bytes_read=1129127 bytes_retransmit=9 bytes_invalid=0 send_seq=61188 receive_seq=61188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=602233 sysload=0.20 cputime=156.291 memavail=1629744 print_time=4225.764 buffer_time=4.061 print_stall=0 extruder: target=215 temp=215.2 pwm=0.336
Stats 4213.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000031 bytes_write=2165177 bytes_read=1129499 bytes_retransmit=9 bytes_invalid=0 send_seq=61205 receive_seq=61205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=602233 sysload=0.18 cputime=156.343 memavail=1629932 print_time=4225.764 buffer_time=3.060 print_stall=0 extruder: target=215 temp=215.1 pwm=0.388
Stats 4214.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2165407 bytes_read=1129891 bytes_retransmit=9 bytes_invalid=0 send_seq=61220 receive_seq=61220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=602233 sysload=0.18 cputime=156.394 memavail=1629732 print_time=4225.764 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 4215.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2166088 bytes_read=1130317 bytes_retransmit=9 bytes_invalid=0 send_seq=61242 receive_seq=61242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=41.5 sd_pos=602352 sysload=0.18 cputime=156.453 memavail=1629432 print_time=4227.869 buffer_time=3.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 4216.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2166334 bytes_read=1130684 bytes_retransmit=9 bytes_invalid=0 send_seq=61258 receive_seq=61258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=602352 sysload=0.18 cputime=156.506 memavail=1629460 print_time=4227.869 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 4217.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2166851 bytes_read=1131086 bytes_retransmit=9 bytes_invalid=0 send_seq=61278 receive_seq=61278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.8 pwm=0.902 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=602411 sysload=0.18 cputime=156.563 memavail=1629464 print_time=4229.671 buffer_time=2.964 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 4218.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2167317 bytes_read=1131497 bytes_retransmit=9 bytes_invalid=0 send_seq=61297 receive_seq=61297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=602471 sysload=0.17 cputime=156.620 memavail=1629208 print_time=4231.472 buffer_time=3.765 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 4219.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=2167606 bytes_read=1131874 bytes_retransmit=9 bytes_invalid=0 send_seq=61312 receive_seq=61312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.8 pwm=0.964 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=602471 sysload=0.17 cputime=156.665 memavail=1629264 print_time=4231.472 buffer_time=2.765 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 4220.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=2168062 bytes_read=1132281 bytes_retransmit=9 bytes_invalid=0 send_seq=61330 receive_seq=61330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=602530 sysload=0.17 cputime=156.703 memavail=1629528 print_time=4233.274 buffer_time=3.565 print_stall=0 extruder: target=215 temp=214.9 pwm=0.577
Stats 4221.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=2168330 bytes_read=1132662 bytes_retransmit=9 bytes_invalid=0 send_seq=61346 receive_seq=61346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.468 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=602530 sysload=0.17 cputime=156.755 memavail=1629540 print_time=4233.274 buffer_time=2.565 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 4222.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=2168807 bytes_read=1133034 bytes_retransmit=9 bytes_invalid=0 send_seq=61363 receive_seq=61363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=602590 sysload=0.17 cputime=156.810 memavail=1629852 print_time=4235.075 buffer_time=3.366 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 4223.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000035 bytes_write=2169020 bytes_read=1133421 bytes_retransmit=9 bytes_invalid=0 send_seq=61377 receive_seq=61377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=602590 sysload=0.15 cputime=156.864 memavail=1629832 print_time=4235.075 buffer_time=2.365 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 4224.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=2169545 bytes_read=1133827 bytes_retransmit=9 bytes_invalid=0 send_seq=61395 receive_seq=61395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=602649 sysload=0.15 cputime=156.919 memavail=1629848 print_time=4236.877 buffer_time=3.166 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 4225.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=2169765 bytes_read=1134183 bytes_retransmit=9 bytes_invalid=0 send_seq=61410 receive_seq=61410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.659 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=602649 sysload=0.15 cputime=156.971 memavail=1629772 print_time=4236.877 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.0 pwm=0.423
Stats 4226.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=2170249 bytes_read=1134578 bytes_retransmit=9 bytes_invalid=0 send_seq=61428 receive_seq=61428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=602709 sysload=0.15 cputime=157.027 memavail=1629548 print_time=4238.678 buffer_time=2.966 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 4227.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=2170747 bytes_read=1134968 bytes_retransmit=9 bytes_invalid=0 send_seq=61448 receive_seq=61448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.473 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=603089 sysload=0.15 cputime=157.086 memavail=1629296 print_time=4240.529 buffer_time=3.817 print_stall=0 extruder: target=215 temp=215.1 pwm=0.344
Stats 4228.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000031 bytes_write=2171064 bytes_read=1135345 bytes_retransmit=9 bytes_invalid=0 send_seq=61466 receive_seq=61466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=603089 sysload=0.14 cputime=157.138 memavail=1629296 print_time=4240.529 buffer_time=2.816 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 4229.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2172075 bytes_read=1135815 bytes_retransmit=9 bytes_invalid=0 send_seq=61494 receive_seq=61494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=54.9 pwm=0.743 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=603375 sysload=0.14 cputime=157.199 memavail=1629292 print_time=4241.018 buffer_time=2.305 print_stall=0 extruder: target=215 temp=215.1 pwm=0.385
Stats 4230.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2172888 bytes_read=1136231 bytes_retransmit=9 bytes_invalid=0 send_seq=61517 receive_seq=61517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=603940 sysload=0.14 cputime=157.262 memavail=1629080 print_time=4241.871 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 4231.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2174029 bytes_read=1136663 bytes_retransmit=9 bytes_invalid=0 send_seq=61546 receive_seq=61546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=604666 sysload=0.14 cputime=157.327 memavail=1629052 print_time=4242.790 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.0 pwm=0.532
Stats 4232.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2175154 bytes_read=1137130 bytes_retransmit=9 bytes_invalid=0 send_seq=61576 receive_seq=61576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.154 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=605516 sysload=0.14 cputime=157.378 memavail=1628952 print_time=4243.907 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 4233.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2176110 bytes_read=1137561 bytes_retransmit=9 bytes_invalid=0 send_seq=61602 receive_seq=61602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=606230 sysload=0.13 cputime=157.445 memavail=1629076 print_time=4244.796 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 4234.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=2177363 bytes_read=1138013 bytes_retransmit=9 bytes_invalid=0 send_seq=61632 receive_seq=61632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=607183 sysload=0.13 cputime=157.515 memavail=1629020 print_time=4245.888 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 4235.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=2178084 bytes_read=1138430 bytes_retransmit=9 bytes_invalid=0 send_seq=61652 receive_seq=61652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=607680 sysload=0.13 cputime=157.580 memavail=1629332 print_time=4246.919 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 4236.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=2179187 bytes_read=1138871 bytes_retransmit=9 bytes_invalid=0 send_seq=61680 receive_seq=61680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=608213 sysload=0.13 cputime=157.644 memavail=1628964 print_time=4247.884 buffer_time=2.167 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 4237.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=2180320 bytes_read=1139288 bytes_retransmit=9 bytes_invalid=0 send_seq=61706 receive_seq=61706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=608413 sysload=0.13 cputime=157.705 memavail=1628992 print_time=4248.953 buffer_time=2.235 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 4238.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=2181179 bytes_read=1139725 bytes_retransmit=9 bytes_invalid=0 send_seq=61730 receive_seq=61730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=608531 sysload=0.12 cputime=157.773 memavail=1628744 print_time=4249.909 buffer_time=2.190 print_stall=0 extruder: target=215 temp=214.9 pwm=0.595
Stats 4239.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2182119 bytes_read=1140161 bytes_retransmit=9 bytes_invalid=0 send_seq=61754 receive_seq=61754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=608678 sysload=0.12 cputime=157.827 memavail=1628936 print_time=4250.980 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.7 pwm=0.571
Stats 4240.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2183033 bytes_read=1140573 bytes_retransmit=9 bytes_invalid=0 send_seq=61779 receive_seq=61779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=608794 sysload=0.12 cputime=157.866 memavail=1628872 print_time=4252.131 buffer_time=2.411 print_stall=0 extruder: target=215 temp=214.6 pwm=0.521
Stats 4241.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2183730 bytes_read=1140995 bytes_retransmit=9 bytes_invalid=0 send_seq=61800 receive_seq=61800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=608854 sysload=0.12 cputime=157.922 memavail=1628492 print_time=4252.720 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.7 pwm=0.471
Stats 4242.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2184795 bytes_read=1141431 bytes_retransmit=9 bytes_invalid=0 send_seq=61827 receive_seq=61827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=608972 sysload=0.12 cputime=157.983 memavail=1629144 print_time=4253.924 buffer_time=2.204 print_stall=0 extruder: target=215 temp=214.8 pwm=0.396
Stats 4243.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2185687 bytes_read=1141838 bytes_retransmit=9 bytes_invalid=0 send_seq=61851 receive_seq=61851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=609117 sysload=0.11 cputime=158.042 memavail=1628832 print_time=4255.127 buffer_time=2.406 print_stall=0 extruder: target=215 temp=214.7 pwm=0.509
Stats 4244.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2186415 bytes_read=1142265 bytes_retransmit=9 bytes_invalid=0 send_seq=61870 receive_seq=61870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=609173 sysload=0.11 cputime=158.100 memavail=1628796 print_time=4255.725 buffer_time=2.003 print_stall=0 extruder: target=215 temp=214.8 pwm=0.441
Stats 4245.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2187484 bytes_read=1142706 bytes_retransmit=9 bytes_invalid=0 send_seq=61898 receive_seq=61898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996407 heater_bed: target=55 temp=55.1 pwm=0.028 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=609317 sysload=0.11 cputime=158.161 memavail=1628840 print_time=4256.912 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.8 pwm=0.417
Stats 4246.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2188434 bytes_read=1143118 bytes_retransmit=9 bytes_invalid=0 send_seq=61923 receive_seq=61923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=609434 sysload=0.11 cputime=158.220 memavail=1628548 print_time=4258.054 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.0 pwm=0.349
Stats 4247.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2189393 bytes_read=1143560 bytes_retransmit=9 bytes_invalid=0 send_seq=61948 receive_seq=61948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.1 pwm=0.280 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=609581 sysload=0.11 cputime=158.277 memavail=1628612 print_time=4259.136 buffer_time=2.413 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 4248.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=2190373 bytes_read=1144001 bytes_retransmit=9 bytes_invalid=0 send_seq=61976 receive_seq=61976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.149 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=609699 sysload=0.10 cputime=158.340 memavail=1628544 print_time=4260.116 buffer_time=2.392 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 4249.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2191219 bytes_read=1144428 bytes_retransmit=9 bytes_invalid=0 send_seq=62001 receive_seq=62001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=609848 sysload=0.10 cputime=158.394 memavail=1628864 print_time=4260.958 buffer_time=2.233 print_stall=0 extruder: target=215 temp=215.1 pwm=0.377
Stats 4250.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2192421 bytes_read=1144895 bytes_retransmit=9 bytes_invalid=0 send_seq=62031 receive_seq=62031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=610345 sysload=0.10 cputime=158.456 memavail=1628596 print_time=4261.853 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 4251.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2193599 bytes_read=1145346 bytes_retransmit=9 bytes_invalid=0 send_seq=62061 receive_seq=62061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.9 pwm=0.451 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=611115 sysload=0.10 cputime=158.521 memavail=1628600 print_time=4263.037 buffer_time=2.312 print_stall=0 extruder: target=215 temp=214.9 pwm=0.550
Stats 4252.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2194436 bytes_read=1145748 bytes_retransmit=9 bytes_invalid=0 send_seq=62084 receive_seq=62084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=611805 sysload=0.10 cputime=158.569 memavail=1628584 print_time=4263.798 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.2 pwm=0.336
Stats 4253.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2195635 bytes_read=1146210 bytes_retransmit=9 bytes_invalid=0 send_seq=62113 receive_seq=62113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.479 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=612530 sysload=0.09 cputime=158.639 memavail=1628864 print_time=4265.038 buffer_time=2.311 print_stall=0 extruder: target=215 temp=215.2 pwm=0.442
Stats 4254.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2196535 bytes_read=1146651 bytes_retransmit=9 bytes_invalid=0 send_seq=62138 receive_seq=62138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=613207 sysload=0.09 cputime=158.707 memavail=1628828 print_time=4265.732 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.0 pwm=0.546
Stats 4255.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2197621 bytes_read=1147078 bytes_retransmit=9 bytes_invalid=0 send_seq=62166 receive_seq=62166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=613839 sysload=0.09 cputime=158.776 memavail=1629132 print_time=4266.973 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.1 pwm=0.535
Stats 4256.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2198361 bytes_read=1147510 bytes_retransmit=9 bytes_invalid=0 send_seq=62189 receive_seq=62189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=614216 sysload=0.09 cputime=158.843 memavail=1629272 print_time=4267.767 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.0 pwm=0.535
Stats 4257.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2199268 bytes_read=1147931 bytes_retransmit=9 bytes_invalid=0 send_seq=62213 receive_seq=62213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.197 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=615247 sysload=0.09 cputime=158.914 memavail=1629316 print_time=4268.745 buffer_time=2.016 print_stall=0 extruder: target=215 temp=214.9 pwm=0.484
Stats 4258.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=2200567 bytes_read=1148373 bytes_retransmit=9 bytes_invalid=0 send_seq=62244 receive_seq=62244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.589 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=615460 sysload=0.16 cputime=158.975 memavail=1629532 print_time=4269.766 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.7 pwm=0.553
Stats 4259.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=2201671 bytes_read=1148850 bytes_retransmit=9 bytes_invalid=0 send_seq=62273 receive_seq=62273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=615643 sysload=0.16 cputime=159.034 memavail=1629628 print_time=4271.126 buffer_time=2.397 print_stall=0 extruder: target=215 temp=214.8 pwm=0.502
Stats 4260.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=2202672 bytes_read=1149286 bytes_retransmit=9 bytes_invalid=0 send_seq=62300 receive_seq=62300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=615792 sysload=0.16 cputime=159.093 memavail=1629596 print_time=4272.171 buffer_time=2.441 print_stall=0 extruder: target=215 temp=214.7 pwm=0.506
Stats 4261.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=2203705 bytes_read=1149713 bytes_retransmit=9 bytes_invalid=0 send_seq=62328 receive_seq=62328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=615913 sysload=0.16 cputime=159.150 memavail=1629088 print_time=4273.291 buffer_time=2.560 print_stall=0 extruder: target=215 temp=214.5 pwm=0.601
Stats 4262.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=2204385 bytes_read=1150140 bytes_retransmit=9 bytes_invalid=0 send_seq=62350 receive_seq=62350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.439 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=615972 sysload=0.16 cputime=159.190 memavail=1628888 print_time=4273.864 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.4 pwm=0.601
Stats 4263.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=2205436 bytes_read=1150591 bytes_retransmit=9 bytes_invalid=0 send_seq=62380 receive_seq=62380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.688 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=616124 sysload=0.15 cputime=159.249 memavail=1628880 print_time=4275.050 buffer_time=2.319 print_stall=0 extruder: target=215 temp=214.3 pwm=0.583
Stats 4264.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2206420 bytes_read=1151033 bytes_retransmit=9 bytes_invalid=0 send_seq=62408 receive_seq=62408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.582 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=616245 sysload=0.15 cputime=159.307 memavail=1628872 print_time=4276.236 buffer_time=2.505 print_stall=0 extruder: target=215 temp=214.4 pwm=0.516
Stats 4265.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2207126 bytes_read=1151470 bytes_retransmit=9 bytes_invalid=0 send_seq=62432 receive_seq=62432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=616306 sysload=0.15 cputime=159.366 memavail=1629380 print_time=4276.834 buffer_time=2.101 print_stall=0 extruder: target=215 temp=214.4 pwm=0.464
Stats 4266.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2208221 bytes_read=1151916 bytes_retransmit=9 bytes_invalid=0 send_seq=62461 receive_seq=62461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=616456 sysload=0.15 cputime=159.426 memavail=1629380 print_time=4278.022 buffer_time=2.288 print_stall=0 extruder: target=215 temp=214.4 pwm=0.480
Stats 4267.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2209127 bytes_read=1152333 bytes_retransmit=9 bytes_invalid=0 send_seq=62487 receive_seq=62487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=616577 sysload=0.15 cputime=159.483 memavail=1629376 print_time=4279.165 buffer_time=2.430 print_stall=0 extruder: target=215 temp=214.3 pwm=0.570
Stats 4268.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2209834 bytes_read=1152760 bytes_retransmit=9 bytes_invalid=0 send_seq=62509 receive_seq=62509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=54.5 mcu_temp: temp=41.2 sd_pos=616667 sysload=0.14 cputime=159.540 memavail=1629188 print_time=4279.735 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.3 pwm=0.490
Stats 4269.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2210841 bytes_read=1153221 bytes_retransmit=9 bytes_invalid=0 send_seq=62538 receive_seq=62538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=616787 sysload=0.14 cputime=159.601 memavail=1629692 print_time=4280.748 buffer_time=2.013 print_stall=0 extruder: target=215 temp=214.2 pwm=0.601
Stats 4270.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2211979 bytes_read=1153648 bytes_retransmit=9 bytes_invalid=0 send_seq=62566 receive_seq=62566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=617028 sysload=0.14 cputime=159.665 memavail=1629480 print_time=4282.058 buffer_time=2.323 print_stall=0 extruder: target=215 temp=214.5 pwm=0.402
Stats 4271.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2213115 bytes_read=1154110 bytes_retransmit=9 bytes_invalid=0 send_seq=62595 receive_seq=62595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=617249 sysload=0.14 cputime=159.726 memavail=1629196 print_time=4282.902 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.5 pwm=0.514
Stats 4272.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2214781 bytes_read=1154601 bytes_retransmit=9 bytes_invalid=0 send_seq=62633 receive_seq=62633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=617686 sysload=0.14 cputime=159.789 memavail=1629192 print_time=4285.351 buffer_time=3.615 print_stall=0 extruder: target=215 temp=214.7 pwm=0.386
Stats 4273.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2215007 bytes_read=1154958 bytes_retransmit=9 bytes_invalid=0 send_seq=62647 receive_seq=62647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=617686 sysload=0.13 cputime=159.823 memavail=1628680 print_time=4285.351 buffer_time=2.615 print_stall=0 extruder: target=215 temp=214.4 pwm=0.574
Stats 4274.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=2215570 bytes_read=1155395 bytes_retransmit=9 bytes_invalid=0 send_seq=62668 receive_seq=62668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=617744 sysload=0.13 cputime=159.863 memavail=1628968 print_time=4287.152 buffer_time=3.416 print_stall=0 extruder: target=215 temp=214.4 pwm=0.612
Stats 4275.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=2215784 bytes_read=1155766 bytes_retransmit=9 bytes_invalid=0 send_seq=62682 receive_seq=62682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=617744 sysload=0.13 cputime=159.916 memavail=1629260 print_time=4287.152 buffer_time=2.415 print_stall=0 extruder: target=215 temp=214.8 pwm=0.391
Stats 4276.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=2216263 bytes_read=1156148 bytes_retransmit=9 bytes_invalid=0 send_seq=62701 receive_seq=62701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=617803 sysload=0.13 cputime=159.972 memavail=1629260 print_time=4288.954 buffer_time=3.215 print_stall=0 extruder: target=215 temp=214.7 pwm=0.563
Stats 4277.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=2216462 bytes_read=1156530 bytes_retransmit=9 bytes_invalid=0 send_seq=62714 receive_seq=62714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.559 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=617803 sysload=0.13 cputime=160.023 memavail=1629520 print_time=4288.954 buffer_time=2.214 print_stall=0 extruder: target=215 temp=214.6 pwm=0.563
Stats 4278.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000050 bytes_write=2216968 bytes_read=1156926 bytes_retransmit=9 bytes_invalid=0 send_seq=62733 receive_seq=62733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=617861 sysload=0.20 cputime=160.078 memavail=1629532 print_time=4290.755 buffer_time=3.014 print_stall=0 extruder: target=215 temp=214.9 pwm=0.395
Stats 4279.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2217188 bytes_read=1157303 bytes_retransmit=9 bytes_invalid=0 send_seq=62748 receive_seq=62748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.421 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=617861 sysload=0.20 cputime=160.111 memavail=1629264 print_time=4290.755 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.0 pwm=0.399
Stats 4280.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2217694 bytes_read=1157715 bytes_retransmit=9 bytes_invalid=0 send_seq=62767 receive_seq=62767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=617920 sysload=0.20 cputime=160.168 memavail=1629260 print_time=4292.557 buffer_time=2.814 print_stall=0 extruder: target=215 temp=215.1 pwm=0.362
Stats 4281.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2218170 bytes_read=1158106 bytes_retransmit=9 bytes_invalid=0 send_seq=62785 receive_seq=62785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=617977 sysload=0.20 cputime=160.223 memavail=1630040 print_time=4294.358 buffer_time=3.615 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 4282.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2218394 bytes_read=1158458 bytes_retransmit=9 bytes_invalid=0 send_seq=62798 receive_seq=62798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=617977 sysload=0.20 cputime=160.274 memavail=1629800 print_time=4294.358 buffer_time=2.615 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 4283.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2218873 bytes_read=1158870 bytes_retransmit=9 bytes_invalid=0 send_seq=62817 receive_seq=62817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.637 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=618036 sysload=0.26 cputime=160.331 memavail=1630016 print_time=4296.160 buffer_time=3.415 print_stall=0 extruder: target=215 temp=215.4 pwm=0.304
Stats 4284.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2219068 bytes_read=1159251 bytes_retransmit=9 bytes_invalid=0 send_seq=62830 receive_seq=62830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=618036 sysload=0.26 cputime=160.383 memavail=1630004 print_time=4296.160 buffer_time=2.414 print_stall=0 extruder: target=215 temp=215.2 pwm=0.485
Stats 4285.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2219518 bytes_read=1159619 bytes_retransmit=9 bytes_invalid=0 send_seq=62848 receive_seq=62848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=618094 sysload=0.26 cputime=160.436 memavail=1630252 print_time=4297.961 buffer_time=3.215 print_stall=0 extruder: target=215 temp=215.3 pwm=0.385
Stats 4286.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2219757 bytes_read=1159999 bytes_retransmit=9 bytes_invalid=0 send_seq=62863 receive_seq=62863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=618094 sysload=0.26 cputime=160.489 memavail=1630244 print_time=4297.961 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.5 pwm=0.308
Stats 4287.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2220378 bytes_read=1160394 bytes_retransmit=9 bytes_invalid=0 send_seq=62884 receive_seq=62884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.529 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=618213 sysload=0.26 cputime=160.545 memavail=1630532 print_time=4300.650 buffer_time=3.902 print_stall=0 extruder: target=215 temp=215.4 pwm=0.410
Stats 4288.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=2220611 bytes_read=1160754 bytes_retransmit=9 bytes_invalid=0 send_seq=62900 receive_seq=62900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.599 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=618213 sysload=0.32 cputime=160.596 memavail=1630508 print_time=4300.650 buffer_time=2.901 print_stall=0 extruder: target=215 temp=215.2 pwm=0.524
Stats 4289.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=2221037 bytes_read=1161181 bytes_retransmit=9 bytes_invalid=0 send_seq=62917 receive_seq=62917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=618273 sysload=0.32 cputime=160.649 memavail=1630352 print_time=4303.035 buffer_time=4.286 print_stall=0 extruder: target=215 temp=215.2 pwm=0.473
Stats 4290.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=2221316 bytes_read=1161562 bytes_retransmit=9 bytes_invalid=0 send_seq=62933 receive_seq=62933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.633 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=618273 sysload=0.32 cputime=160.703 memavail=1630132 print_time=4303.035 buffer_time=3.285 print_stall=0 extruder: target=215 temp=215.2 pwm=0.448
Stats 4291.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=2221487 bytes_read=1161909 bytes_retransmit=9 bytes_invalid=0 send_seq=62945 receive_seq=62945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=618273 sysload=0.32 cputime=160.754 memavail=1629788 print_time=4303.035 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.3 pwm=0.448
Stats 4292.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=2221981 bytes_read=1162326 bytes_retransmit=9 bytes_invalid=0 send_seq=62965 receive_seq=62965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=618335 sysload=0.32 cputime=160.792 memavail=1629768 print_time=4305.420 buffer_time=3.669 print_stall=0 extruder: target=215 temp=215.4 pwm=0.367
Stats 4293.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=2222210 bytes_read=1162702 bytes_retransmit=9 bytes_invalid=0 send_seq=62980 receive_seq=62980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=618335 sysload=0.38 cputime=160.838 memavail=1629516 print_time=4305.420 buffer_time=2.668 print_stall=0 extruder: target=215 temp=215.3 pwm=0.444
Stats 4294.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2222672 bytes_read=1163094 bytes_retransmit=9 bytes_invalid=0 send_seq=62998 receive_seq=62998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.441 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=618394 sysload=0.38 cputime=160.876 memavail=1629516 print_time=4307.805 buffer_time=4.053 print_stall=0 extruder: target=215 temp=215.2 pwm=0.498
Stats 4295.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2222918 bytes_read=1163491 bytes_retransmit=9 bytes_invalid=0 send_seq=63014 receive_seq=63014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.600 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=618394 sysload=0.38 cputime=160.928 memavail=1629516 print_time=4307.805 buffer_time=3.052 print_stall=0 extruder: target=215 temp=215.3 pwm=0.462
Stats 4296.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2223161 bytes_read=1163872 bytes_retransmit=9 bytes_invalid=0 send_seq=63030 receive_seq=63030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.156 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=618394 sysload=0.38 cputime=160.980 memavail=1629516 print_time=4307.805 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.2 pwm=0.543
Stats 4297.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2223605 bytes_read=1164244 bytes_retransmit=9 bytes_invalid=0 send_seq=63047 receive_seq=63047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.535 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=618455 sysload=0.38 cputime=161.033 memavail=1629760 print_time=4310.190 buffer_time=3.436 print_stall=0 extruder: target=215 temp=215.4 pwm=0.416
Stats 4298.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=2223827 bytes_read=1164631 bytes_retransmit=9 bytes_invalid=0 send_seq=63061 receive_seq=63061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.085 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=618455 sysload=0.43 cputime=161.085 memavail=1629712 print_time=4310.190 buffer_time=2.436 print_stall=0 extruder: target=215 temp=215.4 pwm=0.468
Stats 4299.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=2224295 bytes_read=1165042 bytes_retransmit=9 bytes_invalid=0 send_seq=63080 receive_seq=63080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.499 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=618514 sysload=0.43 cputime=161.139 memavail=1629744 print_time=4312.575 buffer_time=3.820 print_stall=0 extruder: target=215 temp=215.3 pwm=0.526
Stats 4300.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=2224520 bytes_read=1165404 bytes_retransmit=9 bytes_invalid=0 send_seq=63095 receive_seq=63095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=618514 sysload=0.43 cputime=161.190 memavail=1630024 print_time=4312.575 buffer_time=2.820 print_stall=0 extruder: target=215 temp=215.4 pwm=0.403
Stats 4301.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=2224992 bytes_read=1165821 bytes_retransmit=9 bytes_invalid=0 send_seq=63115 receive_seq=63115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=618576 sysload=0.43 cputime=161.245 memavail=1630000 print_time=4314.960 buffer_time=4.204 print_stall=0 extruder: target=215 temp=215.3 pwm=0.439
Stats 4302.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=2225226 bytes_read=1166197 bytes_retransmit=9 bytes_invalid=0 send_seq=63130 receive_seq=63130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=618576 sysload=0.43 cputime=161.294 memavail=1629524 print_time=4314.960 buffer_time=3.204 print_stall=0 extruder: target=215 temp=215.4 pwm=0.369
Stats 4303.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000027 bytes_write=2225455 bytes_read=1166559 bytes_retransmit=9 bytes_invalid=0 send_seq=63145 receive_seq=63145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=618576 sysload=0.47 cputime=161.346 memavail=1629772 print_time=4314.960 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.4 pwm=0.411
Stats 4304.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=2225968 bytes_read=1166981 bytes_retransmit=9 bytes_invalid=0 send_seq=63163 receive_seq=63163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=618636 sysload=0.47 cputime=161.401 memavail=1629964 print_time=4317.345 buffer_time=3.588 print_stall=0 extruder: target=215 temp=215.3 pwm=0.446
Stats 4305.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=2226169 bytes_read=1167352 bytes_retransmit=9 bytes_invalid=0 send_seq=63177 receive_seq=63177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.429 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=618636 sysload=0.47 cputime=161.450 memavail=1629768 print_time=4317.345 buffer_time=2.587 print_stall=0 extruder: target=215 temp=215.2 pwm=0.446
Stats 4306.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=2226594 bytes_read=1167729 bytes_retransmit=9 bytes_invalid=0 send_seq=63195 receive_seq=63195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=618696 sysload=0.47 cputime=161.502 memavail=1629788 print_time=4317.979 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.3 pwm=0.399
Stats 4307.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=2227193 bytes_read=1168141 bytes_retransmit=9 bytes_invalid=0 send_seq=63214 receive_seq=63214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=618816 sysload=0.47 cputime=161.557 memavail=1629532 print_time=4319.248 buffer_time=2.488 print_stall=0 extruder: target=215 temp=215.2 pwm=0.517
Stats 4308.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000033 bytes_write=2227663 bytes_read=1168537 bytes_retransmit=9 bytes_invalid=0 send_seq=63233 receive_seq=63233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=618876 sysload=0.52 cputime=161.645 memavail=1629528 print_time=4319.882 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.2 pwm=0.499
Stats 4309.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2228325 bytes_read=1168949 bytes_retransmit=9 bytes_invalid=0 send_seq=63255 receive_seq=63255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=618996 sysload=0.52 cputime=161.701 memavail=1629484 print_time=4321.150 buffer_time=2.389 print_stall=0 extruder: target=215 temp=215.3 pwm=0.448
Stats 4310.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2228760 bytes_read=1169356 bytes_retransmit=9 bytes_invalid=0 send_seq=63273 receive_seq=63273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.496 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=619055 sysload=0.52 cputime=161.755 memavail=1629768 print_time=4321.784 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.2 pwm=0.511
Stats 4311.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2229433 bytes_read=1169762 bytes_retransmit=9 bytes_invalid=0 send_seq=63294 receive_seq=63294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=619173 sysload=0.52 cputime=161.811 memavail=1630452 print_time=4323.053 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.2 pwm=0.457
Stats 4312.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2229966 bytes_read=1170139 bytes_retransmit=9 bytes_invalid=0 send_seq=63312 receive_seq=63312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.466 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=619292 sysload=0.52 cputime=161.866 memavail=1630300 print_time=4324.321 buffer_time=2.559 print_stall=0 extruder: target=215 temp=215.2 pwm=0.457
Stats 4313.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2230500 bytes_read=1170551 bytes_retransmit=9 bytes_invalid=0 send_seq=63331 receive_seq=63331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.058 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=619352 sysload=0.63 cputime=161.922 memavail=1630368 print_time=4324.955 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.2 pwm=0.455
Stats 4314.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2231167 bytes_read=1170977 bytes_retransmit=9 bytes_invalid=0 send_seq=63353 receive_seq=63353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.297 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=619468 sysload=0.63 cputime=161.981 memavail=1630352 print_time=4326.224 buffer_time=2.460 print_stall=0 extruder: target=215 temp=215.1 pwm=0.490
Stats 4315.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2231580 bytes_read=1171349 bytes_retransmit=9 bytes_invalid=0 send_seq=63370 receive_seq=63370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.8 pwm=0.646 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=619524 sysload=0.63 cputime=162.034 memavail=1630612 print_time=4326.858 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.2 pwm=0.490
Stats 4316.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2232201 bytes_read=1171761 bytes_retransmit=9 bytes_invalid=0 send_seq=63389 receive_seq=63389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=619644 sysload=0.63 cputime=162.091 memavail=1630092 print_time=4328.126 buffer_time=2.361 print_stall=0 extruder: target=215 temp=215.2 pwm=0.430
Stats 4317.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2232765 bytes_read=1172162 bytes_retransmit=9 bytes_invalid=0 send_seq=63409 receive_seq=63409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=619763 sysload=0.63 cputime=162.144 memavail=1630108 print_time=4329.395 buffer_time=2.629 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 4318.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2233294 bytes_read=1172539 bytes_retransmit=9 bytes_invalid=0 send_seq=63427 receive_seq=63427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.032 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=619822 sysload=0.82 cputime=162.182 memavail=1630140 print_time=4330.029 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 4319.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2233924 bytes_read=1172971 bytes_retransmit=9 bytes_invalid=0 send_seq=63447 receive_seq=63447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=619940 sysload=0.82 cputime=162.237 memavail=1629772 print_time=4331.297 buffer_time=2.531 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 4320.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2234418 bytes_read=1173362 bytes_retransmit=9 bytes_invalid=0 send_seq=63465 receive_seq=63465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=620000 sysload=0.82 cputime=162.289 memavail=1630112 print_time=4331.931 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.2 pwm=0.414
Stats 4321.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2235062 bytes_read=1173749 bytes_retransmit=9 bytes_invalid=0 send_seq=63485 receive_seq=63485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.684 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=620120 sysload=0.82 cputime=162.345 memavail=1629364 print_time=4333.200 buffer_time=2.431 print_stall=0 extruder: target=215 temp=215.1 pwm=0.521
Stats 4322.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2235537 bytes_read=1174170 bytes_retransmit=9 bytes_invalid=0 send_seq=63503 receive_seq=63503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=620180 sysload=0.82 cputime=162.382 memavail=1629372 print_time=4333.834 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.2 pwm=0.415
Stats 4323.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2236207 bytes_read=1174562 bytes_retransmit=9 bytes_invalid=0 send_seq=63524 receive_seq=63524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=620299 sysload=0.84 cputime=162.439 memavail=1629344 print_time=4335.102 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.1 pwm=0.540
Stats 4324.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2237139 bytes_read=1174984 bytes_retransmit=9 bytes_invalid=0 send_seq=63548 receive_seq=63548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.448 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=620431 sysload=0.84 cputime=162.497 memavail=1628860 print_time=4336.622 buffer_time=2.852 print_stall=0 extruder: target=215 temp=215.1 pwm=0.514
Stats 4325.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2237613 bytes_read=1175400 bytes_retransmit=9 bytes_invalid=0 send_seq=63565 receive_seq=63565 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=620491 sysload=0.84 cputime=162.552 memavail=1629128 print_time=4337.256 buffer_time=2.485 print_stall=0 extruder: target=215 temp=215.2 pwm=0.461
Stats 4326.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2238086 bytes_read=1175782 bytes_retransmit=9 bytes_invalid=0 send_seq=63584 receive_seq=63584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=620551 sysload=0.84 cputime=162.606 memavail=1629120 print_time=4337.890 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.2 pwm=0.410
Stats 4327.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2238759 bytes_read=1176179 bytes_retransmit=9 bytes_invalid=0 send_seq=63606 receive_seq=63606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.452 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=620670 sysload=0.84 cputime=162.665 memavail=1629380 print_time=4339.158 buffer_time=2.387 print_stall=0 extruder: target=215 temp=215.2 pwm=0.401
Stats 4328.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2239193 bytes_read=1176595 bytes_retransmit=9 bytes_invalid=0 send_seq=63623 receive_seq=63623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.342 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=620730 sysload=0.85 cputime=162.718 memavail=1629856 print_time=4339.793 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 4329.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2239848 bytes_read=1177007 bytes_retransmit=9 bytes_invalid=0 send_seq=63645 receive_seq=63645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=620847 sysload=0.85 cputime=162.775 memavail=1629632 print_time=4341.061 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 4330.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2240441 bytes_read=1177394 bytes_retransmit=9 bytes_invalid=0 send_seq=63665 receive_seq=63665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=620967 sysload=0.85 cputime=162.830 memavail=1629880 print_time=4342.329 buffer_time=2.556 print_stall=0 extruder: target=215 temp=214.8 pwm=0.596
Stats 4331.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2240928 bytes_read=1177815 bytes_retransmit=9 bytes_invalid=0 send_seq=63683 receive_seq=63683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=621027 sysload=0.85 cputime=162.884 memavail=1630096 print_time=4342.964 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 4332.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2241603 bytes_read=1178217 bytes_retransmit=9 bytes_invalid=0 send_seq=63706 receive_seq=63706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.686 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=621147 sysload=0.85 cputime=162.944 memavail=1630156 print_time=4344.232 buffer_time=2.457 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 4333.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2242063 bytes_read=1178599 bytes_retransmit=9 bytes_invalid=0 send_seq=63725 receive_seq=63725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=621203 sysload=0.86 cputime=162.998 memavail=1630156 print_time=4344.866 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 4334.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2242723 bytes_read=1179055 bytes_retransmit=9 bytes_invalid=0 send_seq=63747 receive_seq=63747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.557 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=621318 sysload=0.86 cputime=163.055 memavail=1630344 print_time=4346.135 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 4335.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2243311 bytes_read=1179462 bytes_retransmit=9 bytes_invalid=0 send_seq=63771 receive_seq=63771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=621436 sysload=0.86 cputime=163.112 memavail=1630368 print_time=4347.403 buffer_time=2.626 print_stall=0 extruder: target=215 temp=214.8 pwm=0.585
Stats 4336.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2243845 bytes_read=1179864 bytes_retransmit=9 bytes_invalid=0 send_seq=63791 receive_seq=63791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=621496 sysload=0.86 cputime=163.167 memavail=1630340 print_time=4348.037 buffer_time=2.259 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 4337.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2244439 bytes_read=1180280 bytes_retransmit=9 bytes_invalid=0 send_seq=63811 receive_seq=63811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=621615 sysload=0.86 cputime=163.224 memavail=1630088 print_time=4349.305 buffer_time=2.527 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 4338.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2244931 bytes_read=1180662 bytes_retransmit=9 bytes_invalid=0 send_seq=63830 receive_seq=63830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=621674 sysload=0.95 cputime=163.279 memavail=1630084 print_time=4349.940 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 4339.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2245618 bytes_read=1181089 bytes_retransmit=9 bytes_invalid=0 send_seq=63852 receive_seq=63852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=621793 sysload=0.95 cputime=163.338 memavail=1630108 print_time=4351.208 buffer_time=2.429 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 4340.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2246073 bytes_read=1181500 bytes_retransmit=9 bytes_invalid=0 send_seq=63871 receive_seq=63871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=621853 sysload=0.95 cputime=163.392 memavail=1630132 print_time=4351.842 buffer_time=2.063 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 4341.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2246739 bytes_read=1181897 bytes_retransmit=9 bytes_invalid=0 send_seq=63893 receive_seq=63893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=621976 sysload=0.95 cputime=163.444 memavail=1630088 print_time=4353.111 buffer_time=2.330 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 4342.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2247350 bytes_read=1182304 bytes_retransmit=9 bytes_invalid=0 send_seq=63914 receive_seq=63914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.557 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=622100 sysload=0.95 cputime=163.482 memavail=1630452 print_time=4354.379 buffer_time=2.598 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 4343.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2247946 bytes_read=1182730 bytes_retransmit=9 bytes_invalid=0 send_seq=63936 receive_seq=63936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.442 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=622159 sysload=0.96 cputime=163.537 memavail=1630168 print_time=4356.764 buffer_time=3.983 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 4344.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2248174 bytes_read=1183104 bytes_retransmit=9 bytes_invalid=0 send_seq=63951 receive_seq=63951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=622159 sysload=0.96 cputime=163.586 memavail=1630168 print_time=4356.764 buffer_time=2.982 print_stall=0 extruder: target=215 temp=215.1 pwm=0.411
Stats 4345.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2248623 bytes_read=1183485 bytes_retransmit=9 bytes_invalid=0 send_seq=63969 receive_seq=63969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.616 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=622220 sysload=0.96 cputime=163.641 memavail=1630164 print_time=4359.149 buffer_time=4.367 print_stall=0 extruder: target=215 temp=215.0 pwm=0.516
Stats 4346.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2248960 bytes_read=1183874 bytes_retransmit=9 bytes_invalid=0 send_seq=63986 receive_seq=63986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.8 pwm=0.759 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=622220 sysload=0.96 cputime=163.691 memavail=1629924 print_time=4359.149 buffer_time=3.366 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 4347.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2249172 bytes_read=1184221 bytes_retransmit=9 bytes_invalid=0 send_seq=64000 receive_seq=64000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=622220 sysload=0.96 cputime=163.740 memavail=1629924 print_time=4359.149 buffer_time=2.366 print_stall=0 extruder: target=215 temp=215.0 pwm=0.514
Stats 4348.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2249698 bytes_read=1184619 bytes_retransmit=9 bytes_invalid=0 send_seq=64020 receive_seq=64020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=622279 sysload=0.96 cputime=163.796 memavail=1630140 print_time=4361.534 buffer_time=3.750 print_stall=0 extruder: target=215 temp=215.2 pwm=0.388
Stats 4349.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2249939 bytes_read=1185025 bytes_retransmit=9 bytes_invalid=0 send_seq=64035 receive_seq=64035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=622279 sysload=0.96 cputime=163.850 memavail=1630204 print_time=4361.534 buffer_time=2.749 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 4350.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2250500 bytes_read=1185433 bytes_retransmit=9 bytes_invalid=0 send_seq=64057 receive_seq=64057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=622341 sysload=0.96 cputime=163.906 memavail=1630140 print_time=4363.919 buffer_time=4.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 4351.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2250708 bytes_read=1185805 bytes_retransmit=9 bytes_invalid=0 send_seq=64071 receive_seq=64071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=622341 sysload=0.96 cputime=163.957 memavail=1629876 print_time=4363.919 buffer_time=3.133 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 4352.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2250948 bytes_read=1186196 bytes_retransmit=9 bytes_invalid=0 send_seq=64086 receive_seq=64086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=622341 sysload=0.96 cputime=164.008 memavail=1629388 print_time=4363.919 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 4353.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000035 bytes_write=2251507 bytes_read=1186583 bytes_retransmit=9 bytes_invalid=0 send_seq=64106 receive_seq=64106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=54.5 mcu_temp: temp=41.1 sd_pos=622400 sysload=0.97 cputime=164.062 memavail=1629388 print_time=4366.304 buffer_time=3.517 print_stall=0 extruder: target=215 temp=215.4 pwm=0.225
Stats 4354.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2251737 bytes_read=1186975 bytes_retransmit=9 bytes_invalid=0 send_seq=64121 receive_seq=64121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=622400 sysload=0.97 cputime=164.114 memavail=1629380 print_time=4366.304 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.1 pwm=0.514
Stats 4355.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2252275 bytes_read=1187386 bytes_retransmit=9 bytes_invalid=0 send_seq=64140 receive_seq=64140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=622462 sysload=0.97 cputime=164.167 memavail=1629372 print_time=4368.689 buffer_time=3.902 print_stall=0 extruder: target=215 temp=214.9 pwm=0.582
Stats 4356.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2252522 bytes_read=1187753 bytes_retransmit=9 bytes_invalid=0 send_seq=64156 receive_seq=64156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.472 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=622462 sysload=0.97 cputime=164.201 memavail=1629640 print_time=4368.689 buffer_time=2.901 print_stall=0 extruder: target=215 temp=215.4 pwm=0.234
Stats 4357.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2253006 bytes_read=1188155 bytes_retransmit=9 bytes_invalid=0 send_seq=64176 receive_seq=64176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=622522 sysload=0.97 cputime=164.258 memavail=1629672 print_time=4371.074 buffer_time=4.285 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 4358.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=2253324 bytes_read=1188551 bytes_retransmit=9 bytes_invalid=0 send_seq=64192 receive_seq=64192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=622522 sysload=0.89 cputime=164.314 memavail=1629620 print_time=4371.074 buffer_time=3.284 print_stall=0 extruder: target=215 temp=215.1 pwm=0.481
Stats 4359.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2253572 bytes_read=1188938 bytes_retransmit=9 bytes_invalid=0 send_seq=64209 receive_seq=64209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=622522 sysload=0.89 cputime=164.365 memavail=1629420 print_time=4371.074 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 4360.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2254088 bytes_read=1189335 bytes_retransmit=9 bytes_invalid=0 send_seq=64228 receive_seq=64228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.651 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=622584 sysload=0.89 cputime=164.420 memavail=1629296 print_time=4373.459 buffer_time=3.667 print_stall=0 extruder: target=215 temp=214.9 pwm=0.582
Stats 4361.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2254306 bytes_read=1189716 bytes_retransmit=9 bytes_invalid=0 send_seq=64241 receive_seq=64241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=622584 sysload=0.89 cputime=164.466 memavail=1628692 print_time=4373.459 buffer_time=2.667 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 4362.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2254762 bytes_read=1190103 bytes_retransmit=9 bytes_invalid=0 send_seq=64261 receive_seq=64261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.440 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=622646 sysload=0.89 cputime=164.503 memavail=1628700 print_time=4373.792 buffer_time=1.999 print_stall=0 extruder: target=215 temp=215.1 pwm=0.417
Stats 4363.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=2255239 bytes_read=1190490 bytes_retransmit=9 bytes_invalid=0 send_seq=64278 receive_seq=64278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=622705 sysload=0.82 cputime=164.558 memavail=1628444 print_time=4375.564 buffer_time=2.772 print_stall=0 extruder: target=215 temp=215.2 pwm=0.356
Stats 4364.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2255759 bytes_read=1190921 bytes_retransmit=9 bytes_invalid=0 send_seq=64298 receive_seq=64298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.184 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=622765 sysload=0.82 cputime=164.615 memavail=1628448 print_time=4377.366 buffer_time=3.572 print_stall=0 extruder: target=215 temp=214.9 pwm=0.599
Stats 4365.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2256019 bytes_read=1191293 bytes_retransmit=9 bytes_invalid=0 send_seq=64315 receive_seq=64315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=622765 sysload=0.82 cputime=164.667 memavail=1628636 print_time=4377.366 buffer_time=2.572 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 4366.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2256551 bytes_read=1191695 bytes_retransmit=9 bytes_invalid=0 send_seq=64335 receive_seq=64335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.2 pwm=0.011 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=622825 sysload=0.82 cputime=164.724 memavail=1628372 print_time=4379.167 buffer_time=3.373 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 4367.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2256787 bytes_read=1192081 bytes_retransmit=9 bytes_invalid=0 send_seq=64349 receive_seq=64349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=622825 sysload=0.82 cputime=164.775 memavail=1628916 print_time=4379.167 buffer_time=2.372 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 4369.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=2257344 bytes_read=1192473 bytes_retransmit=9 bytes_invalid=0 send_seq=64370 receive_seq=64370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=622887 sysload=0.75 cputime=164.829 memavail=1628884 print_time=4380.969 buffer_time=3.173 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 4370.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2257566 bytes_read=1192860 bytes_retransmit=9 bytes_invalid=0 send_seq=64384 receive_seq=64384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.007 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=622887 sysload=0.75 cputime=164.880 memavail=1628640 print_time=4380.969 buffer_time=2.172 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 4371.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2258083 bytes_read=1193266 bytes_retransmit=9 bytes_invalid=0 send_seq=64402 receive_seq=64402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=622947 sysload=0.75 cputime=164.935 memavail=1628756 print_time=4382.770 buffer_time=2.973 print_stall=0 extruder: target=215 temp=215.1 pwm=0.385
Stats 4372.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2258565 bytes_read=1193653 bytes_retransmit=9 bytes_invalid=0 send_seq=64422 receive_seq=64422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=623009 sysload=0.75 cputime=164.988 memavail=1628556 print_time=4384.572 buffer_time=3.774 print_stall=0 extruder: target=215 temp=214.8 pwm=0.552
Stats 4373.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2258845 bytes_read=1194025 bytes_retransmit=9 bytes_invalid=0 send_seq=64436 receive_seq=64436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.730 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=623009 sysload=0.75 cputime=165.040 memavail=1628812 print_time=4384.572 buffer_time=2.773 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 4374.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=2259343 bytes_read=1194431 bytes_retransmit=9 bytes_invalid=0 send_seq=64454 receive_seq=64454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=623069 sysload=0.69 cputime=165.094 memavail=1628736 print_time=4386.373 buffer_time=3.573 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 4375.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2259574 bytes_read=1194808 bytes_retransmit=9 bytes_invalid=0 send_seq=64469 receive_seq=64469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=623069 sysload=0.69 cputime=165.146 memavail=1628488 print_time=4386.373 buffer_time=2.572 print_stall=0 extruder: target=215 temp=214.8 pwm=0.486
Stats 4376.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2260761 bytes_read=1195260 bytes_retransmit=9 bytes_invalid=0 send_seq=64499 receive_seq=64499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=623508 sysload=0.69 cputime=165.207 memavail=1628756 print_time=4388.511 buffer_time=3.710 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 4377.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2260972 bytes_read=1195641 bytes_retransmit=9 bytes_invalid=0 send_seq=64512 receive_seq=64512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=623508 sysload=0.69 cputime=165.260 memavail=1628844 print_time=4388.511 buffer_time=2.710 print_stall=0 extruder: target=215 temp=215.0 pwm=0.374
Stats 4378.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2261598 bytes_read=1196038 bytes_retransmit=9 bytes_invalid=0 send_seq=64534 receive_seq=64534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=623924 sysload=0.69 cputime=165.320 memavail=1628820 print_time=4389.051 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 4379.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=2262585 bytes_read=1196470 bytes_retransmit=9 bytes_invalid=0 send_seq=64560 receive_seq=64560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.023 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=624590 sysload=0.63 cputime=165.388 memavail=1629052 print_time=4390.078 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.0 pwm=0.366
Stats 4380.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2263911 bytes_read=1196951 bytes_retransmit=9 bytes_invalid=0 send_seq=64590 receive_seq=64590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.572 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=625425 sysload=0.63 cputime=165.459 memavail=1629348 print_time=4391.050 buffer_time=2.247 print_stall=0 extruder: target=215 temp=214.9 pwm=0.436
Stats 4381.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2264704 bytes_read=1197353 bytes_retransmit=9 bytes_invalid=0 send_seq=64613 receive_seq=64613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=625954 sysload=0.63 cputime=165.524 memavail=1629344 print_time=4391.848 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 4382.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2265847 bytes_read=1197790 bytes_retransmit=9 bytes_invalid=0 send_seq=64640 receive_seq=64640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=626759 sysload=0.63 cputime=165.590 memavail=1629816 print_time=4392.815 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 4383.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2266734 bytes_read=1198226 bytes_retransmit=9 bytes_invalid=0 send_seq=64664 receive_seq=64664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=627473 sysload=0.63 cputime=165.652 memavail=1629828 print_time=4393.863 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.0 pwm=0.407
Stats 4384.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2267442 bytes_read=1198618 bytes_retransmit=9 bytes_invalid=0 send_seq=64685 receive_seq=64685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=627961 sysload=0.66 cputime=165.693 memavail=1629844 print_time=4394.996 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 4385.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2268622 bytes_read=1199080 bytes_retransmit=9 bytes_invalid=0 send_seq=64714 receive_seq=64714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.137 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=628333 sysload=0.66 cputime=165.757 memavail=1629584 print_time=4396.058 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 4386.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2269520 bytes_read=1199516 bytes_retransmit=9 bytes_invalid=0 send_seq=64738 receive_seq=64738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=628477 sysload=0.66 cputime=165.816 memavail=1629332 print_time=4396.938 buffer_time=2.132 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 4387.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2270402 bytes_read=1199933 bytes_retransmit=9 bytes_invalid=0 send_seq=64764 receive_seq=64764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=628623 sysload=0.66 cputime=165.873 memavail=1629328 print_time=4397.964 buffer_time=2.158 print_stall=0 extruder: target=215 temp=214.8 pwm=0.527
Stats 4388.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2271356 bytes_read=1200355 bytes_retransmit=9 bytes_invalid=0 send_seq=64788 receive_seq=64788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=628797 sysload=0.66 cputime=165.930 memavail=1629340 print_time=4399.123 buffer_time=2.316 print_stall=0 extruder: target=215 temp=214.8 pwm=0.527
Stats 4389.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2272318 bytes_read=1200791 bytes_retransmit=9 bytes_invalid=0 send_seq=64812 receive_seq=64812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.364 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=628944 sysload=0.61 cputime=165.968 memavail=1629088 print_time=4400.338 buffer_time=2.531 print_stall=0 extruder: target=215 temp=214.7 pwm=0.531
Stats 4390.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2273008 bytes_read=1201208 bytes_retransmit=9 bytes_invalid=0 send_seq=64835 receive_seq=64835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.189 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=629030 sysload=0.61 cputime=166.023 memavail=1629088 print_time=4400.956 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.7 pwm=0.531
Stats 4391.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2274031 bytes_read=1201655 bytes_retransmit=9 bytes_invalid=0 send_seq=64861 receive_seq=64861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=629148 sysload=0.61 cputime=166.079 memavail=1629092 print_time=4402.208 buffer_time=2.400 print_stall=0 extruder: target=215 temp=214.8 pwm=0.475
Stats 4392.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2274669 bytes_read=1202056 bytes_retransmit=9 bytes_invalid=0 send_seq=64881 receive_seq=64881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=54.9 pwm=0.598 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=629207 sysload=0.61 cputime=166.112 memavail=1628832 print_time=4402.839 buffer_time=2.030 print_stall=0 extruder: target=215 temp=214.7 pwm=0.515
Stats 4393.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2275731 bytes_read=1202488 bytes_retransmit=9 bytes_invalid=0 send_seq=64910 receive_seq=64910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.015 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=629382 sysload=0.61 cputime=166.154 memavail=1629100 print_time=4404.100 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.8 pwm=0.500
Stats 4394.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2276746 bytes_read=1202945 bytes_retransmit=9 bytes_invalid=0 send_seq=64938 receive_seq=64938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=629498 sysload=0.56 cputime=166.207 memavail=1629100 print_time=4405.297 buffer_time=2.488 print_stall=0 extruder: target=215 temp=214.8 pwm=0.498
Stats 4395.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2277385 bytes_read=1203356 bytes_retransmit=9 bytes_invalid=0 send_seq=64957 receive_seq=64957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.244 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=629585 sysload=0.56 cputime=166.244 memavail=1628856 print_time=4405.883 buffer_time=2.073 print_stall=0 extruder: target=215 temp=215.0 pwm=0.386
Stats 4396.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2278360 bytes_read=1203778 bytes_retransmit=9 bytes_invalid=0 send_seq=64984 receive_seq=64984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=629702 sysload=0.56 cputime=166.304 memavail=1628820 print_time=4406.991 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.1 pwm=0.386
Stats 4397.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2279229 bytes_read=1204215 bytes_retransmit=9 bytes_invalid=0 send_seq=65008 receive_seq=65008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=629880 sysload=0.56 cputime=166.365 memavail=1628352 print_time=4407.987 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 4398.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2280686 bytes_read=1204691 bytes_retransmit=9 bytes_invalid=0 send_seq=65043 receive_seq=65043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.340 rpi: temp=57.0 mcu_temp: temp=41.0 sd_pos=630164 sysload=0.56 cputime=166.429 memavail=1628576 print_time=4409.312 buffer_time=2.501 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 4399.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2282074 bytes_read=1205143 bytes_retransmit=9 bytes_invalid=0 send_seq=65076 receive_seq=65076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.465 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=630620 sysload=0.52 cputime=166.490 memavail=1628500 print_time=4409.914 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 4400.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=2283161 bytes_read=1205605 bytes_retransmit=9 bytes_invalid=0 send_seq=65102 receive_seq=65102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.679 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=631482 sysload=0.52 cputime=166.559 memavail=1628304 print_time=4411.069 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.2 pwm=0.426
Stats 4401.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=2284172 bytes_read=1206031 bytes_retransmit=9 bytes_invalid=0 send_seq=65127 receive_seq=65127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=632003 sysload=0.52 cputime=166.624 memavail=1628548 print_time=4411.864 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.2 pwm=0.470
Stats 4402.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=2285448 bytes_read=1206478 bytes_retransmit=9 bytes_invalid=0 send_seq=65159 receive_seq=65159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.212 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=633007 sysload=0.52 cputime=166.689 memavail=1628564 print_time=4413.106 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.3 pwm=0.344
Stats 4403.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=2286579 bytes_read=1206925 bytes_retransmit=9 bytes_invalid=0 send_seq=65185 receive_seq=65185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.107 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=633578 sysload=0.52 cputime=166.737 memavail=1628556 print_time=4413.974 buffer_time=2.159 print_stall=0 extruder: target=215 temp=215.1 pwm=0.515
Stats 4404.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000059 bytes_write=2287388 bytes_read=1207341 bytes_retransmit=9 bytes_invalid=0 send_seq=65208 receive_seq=65208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=634275 sysload=0.47 cputime=166.803 memavail=1628780 print_time=4414.866 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.9 pwm=0.621
Stats 4405.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2288613 bytes_read=1207781 bytes_retransmit=9 bytes_invalid=0 send_seq=65237 receive_seq=65237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.210 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=635046 sysload=0.47 cputime=166.878 memavail=1629220 print_time=4415.907 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 4406.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2289801 bytes_read=1208226 bytes_retransmit=9 bytes_invalid=0 send_seq=65265 receive_seq=65265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=54.5 mcu_temp: temp=41.0 sd_pos=635535 sysload=0.47 cputime=166.949 memavail=1629352 print_time=4417.092 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.8 pwm=0.579
Stats 4407.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2290654 bytes_read=1208636 bytes_retransmit=9 bytes_invalid=0 send_seq=65289 receive_seq=65289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=635714 sysload=0.47 cputime=167.009 memavail=1629612 print_time=4417.857 buffer_time=2.041 print_stall=0 extruder: target=215 temp=214.8 pwm=0.506
Stats 4408.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2291778 bytes_read=1209058 bytes_retransmit=9 bytes_invalid=0 send_seq=65318 receive_seq=65318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=635890 sysload=0.47 cputime=167.067 memavail=1629592 print_time=4419.303 buffer_time=2.486 print_stall=0 extruder: target=215 temp=214.5 pwm=0.675
Stats 4409.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2292486 bytes_read=1209479 bytes_retransmit=9 bytes_invalid=0 send_seq=65339 receive_seq=65339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.817 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=635982 sysload=0.44 cputime=167.125 memavail=1629556 print_time=4419.854 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.5 pwm=0.538
Stats 4410.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000070 bytes_write=2293515 bytes_read=1209935 bytes_retransmit=9 bytes_invalid=0 send_seq=65367 receive_seq=65367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.133 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=636101 sysload=0.44 cputime=167.182 memavail=1629572 print_time=4420.966 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.5 pwm=0.587
Stats 4411.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000070 bytes_write=2294541 bytes_read=1210362 bytes_retransmit=9 bytes_invalid=0 send_seq=65395 receive_seq=65395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=636282 sysload=0.44 cputime=167.221 memavail=1629072 print_time=4422.153 buffer_time=2.333 print_stall=0 extruder: target=215 temp=214.4 pwm=0.534
Stats 4412.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000070 bytes_write=2295517 bytes_read=1210814 bytes_retransmit=9 bytes_invalid=0 send_seq=65422 receive_seq=65422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.522 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=636402 sysload=0.44 cputime=167.277 memavail=1628584 print_time=4423.345 buffer_time=2.525 print_stall=0 extruder: target=215 temp=214.3 pwm=0.628
Stats 4413.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000070 bytes_write=2296269 bytes_read=1211241 bytes_retransmit=9 bytes_invalid=0 send_seq=65445 receive_seq=65445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=636490 sysload=0.44 cputime=167.314 memavail=1628840 print_time=4423.966 buffer_time=2.145 print_stall=0 extruder: target=215 temp=214.4 pwm=0.513
Stats 4414.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000026 mcu_task_stddev=0.000070 bytes_write=2297318 bytes_read=1211678 bytes_retransmit=9 bytes_invalid=0 send_seq=65475 receive_seq=65475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=636640 sysload=0.40 cputime=167.376 memavail=1629100 print_time=4425.169 buffer_time=2.347 print_stall=0 extruder: target=215 temp=214.4 pwm=0.503
Stats 4415.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2298283 bytes_read=1212140 bytes_retransmit=9 bytes_invalid=0 send_seq=65501 receive_seq=65501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.207 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=636762 sysload=0.40 cputime=167.433 memavail=1628860 print_time=4426.360 buffer_time=2.537 print_stall=0 extruder: target=215 temp=214.3 pwm=0.542
Stats 4416.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2298954 bytes_read=1212561 bytes_retransmit=9 bytes_invalid=0 send_seq=65525 receive_seq=65525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.165 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=636854 sysload=0.40 cputime=167.490 memavail=1628888 print_time=4426.940 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.3 pwm=0.495
Stats 4417.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2299943 bytes_read=1212988 bytes_retransmit=9 bytes_invalid=0 send_seq=65553 receive_seq=65553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.815 rpi: temp=57.0 mcu_temp: temp=40.6 sd_pos=637006 sysload=0.40 cputime=167.549 memavail=1629072 print_time=4428.052 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.4 pwm=0.480
Stats 4418.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2300879 bytes_read=1213435 bytes_retransmit=9 bytes_invalid=0 send_seq=65579 receive_seq=65579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=637128 sysload=0.40 cputime=167.607 memavail=1629120 print_time=4429.059 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.7 pwm=0.287
Stats 4419.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2301819 bytes_read=1213871 bytes_retransmit=9 bytes_invalid=0 send_seq=65606 receive_seq=65606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.090 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=637252 sysload=0.37 cputime=167.663 memavail=1628844 print_time=4429.902 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.6 pwm=0.500
Stats 4420.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2304010 bytes_read=1214403 bytes_retransmit=9 bytes_invalid=0 send_seq=65652 receive_seq=65652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=637989 sysload=0.37 cputime=167.707 memavail=1628812 print_time=4431.386 buffer_time=2.561 print_stall=0 extruder: target=215 temp=214.5 pwm=0.487
Stats 4421.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2304574 bytes_read=1214820 bytes_retransmit=9 bytes_invalid=0 send_seq=65672 receive_seq=65672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=638316 sysload=0.37 cputime=167.761 memavail=1629136 print_time=4431.854 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.6 pwm=0.507
Stats 4422.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2305553 bytes_read=1215251 bytes_retransmit=9 bytes_invalid=0 send_seq=65698 receive_seq=65698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=639233 sysload=0.37 cputime=167.806 memavail=1629108 print_time=4432.922 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.5 pwm=0.570
Stats 4423.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2306627 bytes_read=1215678 bytes_retransmit=9 bytes_invalid=0 send_seq=65726 receive_seq=65726 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.645 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=639802 sysload=0.37 cputime=167.848 memavail=1629092 print_time=4433.854 buffer_time=2.027 print_stall=0 extruder: target=215 temp=214.5 pwm=0.478
Stats 4424.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2307707 bytes_read=1216140 bytes_retransmit=9 bytes_invalid=0 send_seq=65755 receive_seq=65755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=640782 sysload=0.34 cputime=167.920 memavail=1629392 print_time=4434.994 buffer_time=2.167 print_stall=0 extruder: target=215 temp=214.5 pwm=0.548
Stats 4425.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2308743 bytes_read=1216596 bytes_retransmit=9 bytes_invalid=0 send_seq=65783 receive_seq=65783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=57.5 mcu_temp: temp=40.7 sd_pos=641264 sysload=0.34 cputime=167.983 memavail=1629172 print_time=4435.990 buffer_time=2.162 print_stall=0 extruder: target=215 temp=214.5 pwm=0.631
Stats 4426.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2309572 bytes_read=1217008 bytes_retransmit=9 bytes_invalid=0 send_seq=65808 receive_seq=65808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=641880 sysload=0.34 cputime=168.049 memavail=1629100 print_time=4437.072 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.8 pwm=0.435
Stats 4427.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2310450 bytes_read=1217440 bytes_retransmit=9 bytes_invalid=0 send_seq=65832 receive_seq=65831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.023 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=642768 sysload=0.34 cputime=168.093 memavail=1629140 print_time=4437.868 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.0 pwm=0.357
Stats 4428.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2311823 bytes_read=1217901 bytes_retransmit=9 bytes_invalid=0 send_seq=65863 receive_seq=65863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=643178 sysload=0.34 cputime=168.154 memavail=1629132 print_time=4439.113 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 4429.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2312679 bytes_read=1218318 bytes_retransmit=9 bytes_invalid=0 send_seq=65889 receive_seq=65889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=643301 sysload=0.31 cputime=168.192 memavail=1628948 print_time=4439.975 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.9 pwm=0.452
Stats 4430.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=2313657 bytes_read=1218790 bytes_retransmit=9 bytes_invalid=0 send_seq=65917 receive_seq=65917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=643422 sysload=0.31 cputime=168.250 memavail=1628880 print_time=4440.957 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.9 pwm=0.485
Stats 4431.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=2314676 bytes_read=1219236 bytes_retransmit=9 bytes_invalid=0 send_seq=65946 receive_seq=65946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=643572 sysload=0.31 cputime=168.289 memavail=1629204 print_time=4442.029 buffer_time=2.197 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 4432.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=2315699 bytes_read=1219653 bytes_retransmit=9 bytes_invalid=0 send_seq=65972 receive_seq=65972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=643692 sysload=0.31 cputime=168.346 memavail=1628628 print_time=4443.155 buffer_time=2.324 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 4433.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=2316698 bytes_read=1220095 bytes_retransmit=9 bytes_invalid=0 send_seq=65997 receive_seq=65997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=643842 sysload=0.31 cputime=168.386 memavail=1628916 print_time=4444.341 buffer_time=2.509 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 4434.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=2317324 bytes_read=1220501 bytes_retransmit=9 bytes_invalid=0 send_seq=66018 receive_seq=66018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=643902 sysload=0.29 cputime=168.439 memavail=1628664 print_time=4444.932 buffer_time=2.098 print_stall=0 extruder: target=215 temp=214.7 pwm=0.621
Stats 4435.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2318372 bytes_read=1220948 bytes_retransmit=9 bytes_invalid=0 send_seq=66047 receive_seq=66047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=644020 sysload=0.29 cputime=168.499 memavail=1628932 print_time=4446.129 buffer_time=2.295 print_stall=0 extruder: target=215 temp=214.9 pwm=0.473
Stats 4436.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2319345 bytes_read=1221390 bytes_retransmit=9 bytes_invalid=0 send_seq=66072 receive_seq=66072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.435 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=644171 sysload=0.29 cputime=168.559 memavail=1629184 print_time=4447.319 buffer_time=2.486 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 4437.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2319972 bytes_read=1221801 bytes_retransmit=9 bytes_invalid=0 send_seq=66094 receive_seq=66094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.535 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=644233 sysload=0.29 cputime=168.613 memavail=1629160 print_time=4447.899 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.7 pwm=0.589
Stats 4438.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2320974 bytes_read=1222228 bytes_retransmit=9 bytes_invalid=0 send_seq=66122 receive_seq=66122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=644383 sysload=0.29 cputime=168.672 memavail=1628936 print_time=4449.034 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.8 pwm=0.476
Stats 4439.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2321905 bytes_read=1222665 bytes_retransmit=9 bytes_invalid=0 send_seq=66146 receive_seq=66146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=644534 sysload=0.29 cputime=168.713 memavail=1628892 print_time=4450.056 buffer_time=2.220 print_stall=0 extruder: target=215 temp=214.7 pwm=0.557
Stats 4440.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2322796 bytes_read=1223106 bytes_retransmit=9 bytes_invalid=0 send_seq=66171 receive_seq=66171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=644685 sysload=0.26 cputime=168.771 memavail=1628656 print_time=4450.989 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.7 pwm=0.618
Stats 4441.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2324040 bytes_read=1223543 bytes_retransmit=9 bytes_invalid=0 send_seq=66201 receive_seq=66201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=644969 sysload=0.26 cputime=168.836 memavail=1628856 print_time=4452.078 buffer_time=2.241 print_stall=0 extruder: target=215 temp=214.6 pwm=0.599
Stats 4442.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2325599 bytes_read=1224040 bytes_retransmit=9 bytes_invalid=0 send_seq=66237 receive_seq=66237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=645372 sysload=0.26 cputime=168.895 memavail=1629156 print_time=4452.880 buffer_time=2.042 print_stall=0 extruder: target=215 temp=214.8 pwm=0.519
Stats 4443.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2326533 bytes_read=1224471 bytes_retransmit=9 bytes_invalid=0 send_seq=66263 receive_seq=66263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.645 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=645675 sysload=0.26 cputime=168.935 memavail=1628880 print_time=4453.933 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 4444.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2327188 bytes_read=1224863 bytes_retransmit=9 bytes_invalid=0 send_seq=66285 receive_seq=66284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=645971 sysload=0.26 cputime=168.996 memavail=1629204 print_time=4454.981 buffer_time=2.141 print_stall=0 extruder: target=215 temp=215.1 pwm=0.365
Stats 4445.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2327912 bytes_read=1225305 bytes_retransmit=9 bytes_invalid=0 send_seq=66306 receive_seq=66306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.255 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=646263 sysload=0.24 cputime=169.056 memavail=1629536 print_time=4456.028 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.8 pwm=0.545
Stats 4446.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2328463 bytes_read=1225711 bytes_retransmit=9 bytes_invalid=0 send_seq=66327 receive_seq=66327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.209 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=646515 sysload=0.24 cputime=169.115 memavail=1629816 print_time=4456.932 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 4447.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2329316 bytes_read=1226118 bytes_retransmit=9 bytes_invalid=0 send_seq=66351 receive_seq=66351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.589 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=646820 sysload=0.24 cputime=169.179 memavail=1629740 print_time=4457.903 buffer_time=2.062 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 4448.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2329959 bytes_read=1226525 bytes_retransmit=9 bytes_invalid=0 send_seq=66369 receive_seq=66369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=647121 sysload=0.24 cputime=169.237 memavail=1630044 print_time=4458.978 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 4449.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2330667 bytes_read=1226946 bytes_retransmit=9 bytes_invalid=0 send_seq=66393 receive_seq=66393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=647413 sysload=0.24 cputime=169.300 memavail=1629988 print_time=4460.052 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 4450.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2331262 bytes_read=1227343 bytes_retransmit=9 bytes_invalid=0 send_seq=66412 receive_seq=66412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.046 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=647650 sysload=0.22 cputime=169.362 memavail=1629776 print_time=4460.858 buffer_time=2.015 print_stall=0 extruder: target=215 temp=214.8 pwm=0.586
Stats 4451.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2331919 bytes_read=1227745 bytes_retransmit=9 bytes_invalid=0 send_seq=66429 receive_seq=66429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=647994 sysload=0.22 cputime=169.422 memavail=1629248 print_time=4462.053 buffer_time=2.209 print_stall=0 extruder: target=215 temp=214.8 pwm=0.586
Stats 4452.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2332757 bytes_read=1228166 bytes_retransmit=9 bytes_invalid=0 send_seq=66453 receive_seq=66453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=648294 sysload=0.22 cputime=169.481 memavail=1629376 print_time=4463.055 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.7 pwm=0.581
Stats 4453.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2333316 bytes_read=1228553 bytes_retransmit=9 bytes_invalid=0 send_seq=66473 receive_seq=66473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=648501 sysload=0.22 cputime=169.521 memavail=1629348 print_time=4463.880 buffer_time=2.035 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 4454.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=2333989 bytes_read=1228965 bytes_retransmit=9 bytes_invalid=0 send_seq=66492 receive_seq=66492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=648789 sysload=0.22 cputime=169.582 memavail=1628852 print_time=4464.980 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.7 pwm=0.573
Stats 4455.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2334689 bytes_read=1229386 bytes_retransmit=9 bytes_invalid=0 send_seq=66513 receive_seq=66513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=649080 sysload=0.20 cputime=169.645 memavail=1628848 print_time=4466.081 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 4456.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2335299 bytes_read=1229768 bytes_retransmit=9 bytes_invalid=0 send_seq=66532 receive_seq=66532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=649322 sysload=0.20 cputime=169.703 memavail=1628800 print_time=4467.028 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.8 pwm=0.525
Stats 4457.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2336229 bytes_read=1230210 bytes_retransmit=9 bytes_invalid=0 send_seq=66557 receive_seq=66557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=649603 sysload=0.20 cputime=169.768 memavail=1628796 print_time=4468.226 buffer_time=2.378 print_stall=0 extruder: target=215 temp=214.7 pwm=0.608
Stats 4458.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2336909 bytes_read=1230621 bytes_retransmit=9 bytes_invalid=0 send_seq=66579 receive_seq=66579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.045 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=649665 sysload=0.20 cputime=169.826 memavail=1628808 print_time=4468.973 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.6 pwm=0.618
Stats 4459.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2337855 bytes_read=1231043 bytes_retransmit=9 bytes_invalid=0 send_seq=66606 receive_seq=66606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=649817 sysload=0.20 cputime=169.886 memavail=1628772 print_time=4470.684 buffer_time=2.835 print_stall=0 extruder: target=215 temp=214.7 pwm=0.592
Stats 4460.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2338403 bytes_read=1231465 bytes_retransmit=9 bytes_invalid=0 send_seq=66624 receive_seq=66624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=649879 sysload=0.19 cputime=169.935 memavail=1628812 print_time=4471.608 buffer_time=2.758 print_stall=0 extruder: target=215 temp=214.8 pwm=0.502
Stats 4461.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2338968 bytes_read=1231866 bytes_retransmit=9 bytes_invalid=0 send_seq=66644 receive_seq=66644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=649941 sysload=0.19 cputime=169.972 memavail=1628788 print_time=4472.587 buffer_time=2.736 print_stall=0 extruder: target=215 temp=214.8 pwm=0.502
Stats 4462.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2339545 bytes_read=1232248 bytes_retransmit=9 bytes_invalid=0 send_seq=66663 receive_seq=66663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=650001 sysload=0.19 cputime=170.026 memavail=1628476 print_time=4473.614 buffer_time=2.764 print_stall=0 extruder: target=215 temp=214.8 pwm=0.559
Stats 4463.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2340165 bytes_read=1232670 bytes_retransmit=9 bytes_invalid=0 send_seq=66684 receive_seq=66684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=650091 sysload=0.19 cputime=170.082 memavail=1628440 print_time=4474.700 buffer_time=2.849 print_stall=0 extruder: target=215 temp=214.8 pwm=0.559
Stats 4464.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2340794 bytes_read=1233074 bytes_retransmit=9 bytes_invalid=0 send_seq=66705 receive_seq=66705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.006 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=650151 sysload=0.19 cputime=170.137 memavail=1628440 print_time=4475.800 buffer_time=2.949 print_stall=0 extruder: target=215 temp=214.8 pwm=0.555
Stats 4465.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2341458 bytes_read=1233481 bytes_retransmit=9 bytes_invalid=0 send_seq=66728 receive_seq=66728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=650212 sysload=0.17 cputime=170.194 memavail=1628440 print_time=4476.945 buffer_time=3.092 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 4466.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2341683 bytes_read=1233856 bytes_retransmit=9 bytes_invalid=0 send_seq=66742 receive_seq=66742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=650212 sysload=0.17 cputime=170.243 memavail=1628440 print_time=4476.945 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.7 pwm=0.625
Stats 4467.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2342303 bytes_read=1234246 bytes_retransmit=9 bytes_invalid=0 send_seq=66762 receive_seq=66762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=650271 sysload=0.17 cputime=170.295 memavail=1628688 print_time=4478.123 buffer_time=2.269 print_stall=0 extruder: target=215 temp=214.7 pwm=0.527
Stats 4468.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2342941 bytes_read=1234626 bytes_retransmit=9 bytes_invalid=0 send_seq=66782 receive_seq=66782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.462 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=650333 sysload=0.17 cputime=170.351 memavail=1628680 print_time=4479.335 buffer_time=2.480 print_stall=0 extruder: target=215 temp=214.8 pwm=0.555
Stats 4469.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2343601 bytes_read=1235058 bytes_retransmit=9 bytes_invalid=0 send_seq=66805 receive_seq=66805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=650422 sysload=0.17 cputime=170.411 memavail=1628944 print_time=4480.587 buffer_time=2.731 print_stall=0 extruder: target=215 temp=214.8 pwm=0.508
Stats 4470.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2344292 bytes_read=1235499 bytes_retransmit=9 bytes_invalid=0 send_seq=66830 receive_seq=66830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.594 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=650483 sysload=0.16 cputime=170.469 memavail=1628940 print_time=4481.850 buffer_time=2.995 print_stall=0 extruder: target=215 temp=214.7 pwm=0.612
Stats 4471.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2344875 bytes_read=1235886 bytes_retransmit=9 bytes_invalid=0 send_seq=66850 receive_seq=66850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.029 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=650543 sysload=0.16 cputime=170.526 memavail=1629212 print_time=4483.146 buffer_time=3.290 print_stall=0 extruder: target=215 temp=214.9 pwm=0.442
Stats 4472.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2345196 bytes_read=1236296 bytes_retransmit=9 bytes_invalid=0 send_seq=66865 receive_seq=66865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.181 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=650543 sysload=0.16 cputime=170.574 memavail=1628684 print_time=4483.146 buffer_time=2.289 print_stall=0 extruder: target=215 temp=214.8 pwm=0.542
Stats 4473.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2345877 bytes_read=1236707 bytes_retransmit=9 bytes_invalid=0 send_seq=66887 receive_seq=66887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=650605 sysload=0.16 cputime=170.609 memavail=1628432 print_time=4484.465 buffer_time=2.607 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 4474.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2346534 bytes_read=1237115 bytes_retransmit=9 bytes_invalid=0 send_seq=66909 receive_seq=66909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=650662 sysload=0.16 cputime=170.664 memavail=1628692 print_time=4485.805 buffer_time=2.946 print_stall=0 extruder: target=215 temp=214.8 pwm=0.601
Stats 4475.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2347186 bytes_read=1237552 bytes_retransmit=9 bytes_invalid=0 send_seq=66930 receive_seq=66930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=56.5 mcu_temp: temp=40.0 sd_pos=650753 sysload=0.15 cputime=170.712 memavail=1629020 print_time=4487.168 buffer_time=3.309 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 4476.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2347386 bytes_read=1237923 bytes_retransmit=9 bytes_invalid=0 send_seq=66944 receive_seq=66944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=650753 sysload=0.15 cputime=170.746 memavail=1628732 print_time=4487.168 buffer_time=2.308 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 4477.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2348108 bytes_read=1238320 bytes_retransmit=9 bytes_invalid=0 send_seq=66966 receive_seq=66966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=650906 sysload=0.15 cputime=170.800 memavail=1628540 print_time=4487.954 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 4478.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2348943 bytes_read=1238762 bytes_retransmit=9 bytes_invalid=0 send_seq=66991 receive_seq=66991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.451 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=651058 sysload=0.15 cputime=170.860 memavail=1628816 print_time=4489.159 buffer_time=2.299 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 4479.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2349918 bytes_read=1239198 bytes_retransmit=9 bytes_invalid=0 send_seq=67018 receive_seq=67018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.564 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=651208 sysload=0.15 cputime=170.920 memavail=1628524 print_time=4490.237 buffer_time=2.376 print_stall=0 extruder: target=215 temp=214.9 pwm=0.591
Stats 4480.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2350994 bytes_read=1239650 bytes_retransmit=9 bytes_invalid=0 send_seq=67048 receive_seq=67048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=0.627 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=651327 sysload=0.13 cputime=170.981 memavail=1628504 print_time=4491.275 buffer_time=2.413 print_stall=0 extruder: target=215 temp=215.0 pwm=0.498
Stats 4481.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2351966 bytes_read=1240107 bytes_retransmit=9 bytes_invalid=0 send_seq=67076 receive_seq=67076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=0.580 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=651476 sysload=0.13 cputime=171.038 memavail=1629044 print_time=4492.264 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 4482.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2353003 bytes_read=1240558 bytes_retransmit=9 bytes_invalid=0 send_seq=67106 receive_seq=67106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.321 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=651595 sysload=0.13 cputime=171.094 memavail=1629752 print_time=4493.222 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 4483.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2353943 bytes_read=1240980 bytes_retransmit=9 bytes_invalid=0 send_seq=67133 receive_seq=67133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.501 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=651745 sysload=0.13 cputime=171.132 memavail=1629876 print_time=4494.163 buffer_time=2.300 print_stall=0 extruder: target=215 temp=214.9 pwm=0.599
Stats 4484.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2354919 bytes_read=1241432 bytes_retransmit=9 bytes_invalid=0 send_seq=67160 receive_seq=67160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.043 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=651864 sysload=0.13 cputime=171.189 memavail=1630124 print_time=4495.090 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.532
Stats 4485.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2355889 bytes_read=1241878 bytes_retransmit=9 bytes_invalid=0 send_seq=67186 receive_seq=67186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.486 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=652013 sysload=0.12 cputime=171.248 memavail=1630396 print_time=4496.025 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.1 pwm=0.487
Stats 4486.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2356844 bytes_read=1242300 bytes_retransmit=9 bytes_invalid=0 send_seq=67213 receive_seq=67213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=652163 sysload=0.12 cputime=171.304 memavail=1630064 print_time=4496.950 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.1 pwm=0.488
Stats 4487.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2357858 bytes_read=1242762 bytes_retransmit=9 bytes_invalid=0 send_seq=67242 receive_seq=67242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=652310 sysload=0.12 cputime=171.362 memavail=1630064 print_time=4497.869 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.1 pwm=0.506
Stats 4488.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2359098 bytes_read=1243218 bytes_retransmit=9 bytes_invalid=0 send_seq=67273 receive_seq=67273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=652489 sysload=0.12 cputime=171.421 memavail=1630156 print_time=4499.295 buffer_time=2.428 print_stall=0 extruder: target=215 temp=215.0 pwm=0.577
Stats 4489.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2360072 bytes_read=1243630 bytes_retransmit=9 bytes_invalid=0 send_seq=67298 receive_seq=67298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.445 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=652665 sysload=0.12 cputime=171.477 memavail=1630164 print_time=4500.300 buffer_time=2.433 print_stall=0 extruder: target=215 temp=215.1 pwm=0.510
Stats 4490.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2361028 bytes_read=1244111 bytes_retransmit=9 bytes_invalid=0 send_seq=67325 receive_seq=67325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=652781 sysload=0.11 cputime=171.536 memavail=1630164 print_time=4501.313 buffer_time=2.445 print_stall=0 extruder: target=215 temp=215.1 pwm=0.529
Stats 4491.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2362037 bytes_read=1244533 bytes_retransmit=9 bytes_invalid=0 send_seq=67352 receive_seq=67352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.057 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=652901 sysload=0.11 cputime=171.592 memavail=1629876 print_time=4502.412 buffer_time=2.543 print_stall=0 extruder: target=215 temp=215.1 pwm=0.529
Stats 4492.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2362640 bytes_read=1244925 bytes_retransmit=9 bytes_invalid=0 send_seq=67373 receive_seq=67373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.048 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=653027 sysload=0.11 cputime=171.645 memavail=1630240 print_time=4503.011 buffer_time=2.142 print_stall=0 extruder: target=215 temp=215.0 pwm=0.583
Stats 4493.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2363927 bytes_read=1245416 bytes_retransmit=9 bytes_invalid=0 send_seq=67405 receive_seq=67405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=653236 sysload=0.11 cputime=171.687 memavail=1630372 print_time=4504.126 buffer_time=2.256 print_stall=0 extruder: target=215 temp=215.2 pwm=0.442
Stats 4494.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2364848 bytes_read=1245833 bytes_retransmit=9 bytes_invalid=0 send_seq=67431 receive_seq=67431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=653447 sysload=0.11 cputime=171.743 memavail=1630176 print_time=4505.072 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.591
Stats 4495.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2365810 bytes_read=1246265 bytes_retransmit=9 bytes_invalid=0 send_seq=67457 receive_seq=67457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=653598 sysload=0.10 cputime=171.783 memavail=1630160 print_time=4506.152 buffer_time=2.280 print_stall=0 extruder: target=215 temp=215.2 pwm=0.463
Stats 4496.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2366836 bytes_read=1246731 bytes_retransmit=9 bytes_invalid=0 send_seq=67484 receive_seq=67484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=653749 sysload=0.10 cputime=171.839 memavail=1630168 print_time=4507.351 buffer_time=2.479 print_stall=0 extruder: target=215 temp=215.2 pwm=0.518
Stats 4497.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2367469 bytes_read=1247123 bytes_retransmit=9 bytes_invalid=0 send_seq=67505 receive_seq=67505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=54.5 mcu_temp: temp=40.6 sd_pos=653811 sysload=0.10 cputime=171.894 memavail=1630236 print_time=4507.976 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.1 pwm=0.512
Stats 4498.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2368481 bytes_read=1247535 bytes_retransmit=9 bytes_invalid=0 send_seq=67530 receive_seq=67530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.578 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=653930 sysload=0.10 cputime=171.954 memavail=1630160 print_time=4509.274 buffer_time=2.400 print_stall=0 extruder: target=215 temp=215.2 pwm=0.512
Stats 4499.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2369133 bytes_read=1247966 bytes_retransmit=9 bytes_invalid=0 send_seq=67550 receive_seq=67550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=653989 sysload=0.10 cputime=172.011 memavail=1629892 print_time=4509.934 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.4 pwm=0.401
Stats 4500.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=2370208 bytes_read=1248413 bytes_retransmit=9 bytes_invalid=0 send_seq=67579 receive_seq=67579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=654173 sysload=0.18 cputime=172.069 memavail=1630168 print_time=4511.256 buffer_time=2.380 print_stall=0 extruder: target=215 temp=215.3 pwm=0.470
Stats 4501.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=2370823 bytes_read=1248800 bytes_retransmit=9 bytes_invalid=0 send_seq=67599 receive_seq=67599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=654266 sysload=0.18 cputime=172.119 memavail=1630248 print_time=4511.916 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.5 pwm=0.383
Stats 4502.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=2371851 bytes_read=1249266 bytes_retransmit=9 bytes_invalid=0 send_seq=67626 receive_seq=67626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=654416 sysload=0.18 cputime=172.155 memavail=1629972 print_time=4513.221 buffer_time=2.344 print_stall=0 extruder: target=215 temp=215.6 pwm=0.404
Stats 4503.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=2372906 bytes_read=1249693 bytes_retransmit=9 bytes_invalid=0 send_seq=67654 receive_seq=67654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=654568 sysload=0.18 cputime=172.196 memavail=1630000 print_time=4514.476 buffer_time=2.599 print_stall=0 extruder: target=215 temp=215.8 pwm=0.396
Stats 4504.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=2373560 bytes_read=1250105 bytes_retransmit=9 bytes_invalid=0 send_seq=67676 receive_seq=67676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=654656 sysload=0.18 cputime=172.251 memavail=1629764 print_time=4515.096 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.8 pwm=0.375
Stats 4505.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2374614 bytes_read=1250576 bytes_retransmit=9 bytes_invalid=0 send_seq=67704 receive_seq=67704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=654776 sysload=0.24 cputime=172.309 memavail=1629752 print_time=4516.226 buffer_time=2.347 print_stall=0 extruder: target=215 temp=215.9 pwm=0.352
Stats 4506.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2375550 bytes_read=1250998 bytes_retransmit=9 bytes_invalid=0 send_seq=67731 receive_seq=67731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.513 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=654899 sysload=0.24 cputime=172.367 memavail=1629720 print_time=4517.252 buffer_time=2.373 print_stall=0 extruder: target=215 temp=215.7 pwm=0.421
Stats 4507.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2376367 bytes_read=1251415 bytes_retransmit=9 bytes_invalid=0 send_seq=67754 receive_seq=67754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=10 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=655115 sysload=0.24 cputime=172.428 memavail=1629260 print_time=4518.106 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.7 pwm=0.427
Stats 4508.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2377368 bytes_read=1251866 bytes_retransmit=9 bytes_invalid=0 send_seq=67782 receive_seq=67781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=655324 sysload=0.24 cputime=172.487 memavail=1629532 print_time=4519.023 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.7 pwm=0.427
Stats 4509.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2378286 bytes_read=1252293 bytes_retransmit=9 bytes_invalid=0 send_seq=67809 receive_seq=67809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=20 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=655445 sysload=0.24 cputime=172.544 memavail=1629516 print_time=4520.069 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.4 pwm=0.626
Stats 4510.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2379191 bytes_read=1252730 bytes_retransmit=9 bytes_invalid=0 send_seq=67833 receive_seq=67833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=10 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.442 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=655598 sysload=0.22 cputime=172.603 memavail=1629244 print_time=4521.024 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.6 pwm=0.455
Stats 4511.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2380176 bytes_read=1253186 bytes_retransmit=9 bytes_invalid=0 send_seq=67861 receive_seq=67861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=655720 sysload=0.22 cputime=172.662 memavail=1629020 print_time=4521.936 buffer_time=2.054 print_stall=0 extruder: target=215 temp=215.5 pwm=0.507
Stats 4512.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2381517 bytes_read=1253633 bytes_retransmit=9 bytes_invalid=0 send_seq=67893 receive_seq=67893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=655964 sysload=0.22 cputime=172.719 memavail=1629276 print_time=4523.272 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.5 pwm=0.442
Stats 4513.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2382502 bytes_read=1254060 bytes_retransmit=9 bytes_invalid=0 send_seq=67918 receive_seq=67918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.145 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=656147 sysload=0.22 cputime=172.762 memavail=1629016 print_time=4524.128 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.3 pwm=0.546
Stats 4514.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2383468 bytes_read=1254511 bytes_retransmit=9 bytes_invalid=0 send_seq=67945 receive_seq=67945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=656271 sysload=0.22 cputime=172.819 memavail=1629008 print_time=4524.988 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.2 pwm=0.483
Stats 4515.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2384755 bytes_read=1254958 bytes_retransmit=9 bytes_invalid=0 send_seq=67974 receive_seq=67974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=656457 sysload=0.45 cputime=172.879 memavail=1629032 print_time=4526.276 buffer_time=2.384 print_stall=0 extruder: target=215 temp=215.0 pwm=0.583
Stats 4516.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2385756 bytes_read=1255390 bytes_retransmit=9 bytes_invalid=0 send_seq=68000 receive_seq=68000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.460 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=656617 sysload=0.45 cputime=172.939 memavail=1629328 print_time=4527.154 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 4517.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2386679 bytes_read=1255821 bytes_retransmit=9 bytes_invalid=0 send_seq=68023 receive_seq=68023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.069 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=656775 sysload=0.45 cputime=172.994 memavail=1628988 print_time=4528.054 buffer_time=2.160 print_stall=0 extruder: target=215 temp=214.6 pwm=0.685
Stats 4518.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2387598 bytes_read=1256228 bytes_retransmit=9 bytes_invalid=0 send_seq=68047 receive_seq=68047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=656933 sysload=0.45 cputime=173.052 memavail=1628968 print_time=4528.993 buffer_time=2.093 print_stall=0 extruder: target=215 temp=214.5 pwm=0.656
Stats 4519.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2388460 bytes_read=1256645 bytes_retransmit=9 bytes_invalid=0 send_seq=68070 receive_seq=68070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=52 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=657057 sysload=0.45 cputime=173.109 memavail=1629028 print_time=4529.992 buffer_time=2.091 print_stall=0 extruder: target=215 temp=214.4 pwm=0.656
Stats 4520.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=2389503 bytes_read=1257111 bytes_retransmit=9 bytes_invalid=0 send_seq=68097 receive_seq=68097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.244 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=657245 sysload=0.49 cputime=173.171 memavail=1628948 print_time=4531.057 buffer_time=2.151 print_stall=0 extruder: target=215 temp=214.3 pwm=0.656
Stats 4521.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=2390562 bytes_read=1257533 bytes_retransmit=9 bytes_invalid=0 send_seq=68124 receive_seq=68124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=657462 sysload=0.49 cputime=173.232 memavail=1629004 print_time=4532.210 buffer_time=2.303 print_stall=0 extruder: target=215 temp=214.1 pwm=0.684
Stats 4522.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=2391269 bytes_read=1257950 bytes_retransmit=9 bytes_invalid=0 send_seq=68144 receive_seq=68144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.133 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=657644 sysload=0.49 cputime=173.289 memavail=1628964 print_time=4532.967 buffer_time=2.058 print_stall=0 extruder: target=215 temp=214.2 pwm=0.630
Stats 4523.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=2392131 bytes_read=1258376 bytes_retransmit=9 bytes_invalid=0 send_seq=68169 receive_seq=68169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=657798 sysload=0.49 cputime=173.347 memavail=1628928 print_time=4534.957 buffer_time=3.043 print_stall=0 extruder: target=215 temp=214.4 pwm=0.547
Stats 4524.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=2392376 bytes_read=1258722 bytes_retransmit=9 bytes_invalid=0 send_seq=68182 receive_seq=68182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=657798 sysload=0.49 cputime=173.401 memavail=1628968 print_time=4534.957 buffer_time=2.041 print_stall=0 extruder: target=215 temp=214.5 pwm=0.471
Stats 4525.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2393023 bytes_read=1259151 bytes_retransmit=9 bytes_invalid=0 send_seq=68204 receive_seq=68204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=657859 sysload=0.53 cputime=173.456 memavail=1628908 print_time=4536.296 buffer_time=2.377 print_stall=0 extruder: target=215 temp=214.2 pwm=0.668
Stats 4526.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2393686 bytes_read=1259546 bytes_retransmit=9 bytes_invalid=0 send_seq=68225 receive_seq=68225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.8 pwm=0.635 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=657923 sysload=0.53 cputime=173.515 memavail=1628916 print_time=4537.613 buffer_time=2.691 print_stall=0 extruder: target=215 temp=214.5 pwm=0.506
Stats 4527.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2394310 bytes_read=1259933 bytes_retransmit=9 bytes_invalid=0 send_seq=68247 receive_seq=68247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.318 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=657985 sysload=0.53 cputime=173.571 memavail=1628908 print_time=4538.906 buffer_time=2.980 print_stall=0 extruder: target=215 temp=214.8 pwm=0.322
Stats 4528.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2395011 bytes_read=1260361 bytes_retransmit=9 bytes_invalid=0 send_seq=68270 receive_seq=68270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.315 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=658080 sysload=0.53 cputime=173.630 memavail=1629412 print_time=4540.175 buffer_time=3.245 print_stall=0 extruder: target=215 temp=214.7 pwm=0.447
Stats 4529.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2395275 bytes_read=1260737 bytes_retransmit=9 bytes_invalid=0 send_seq=68285 receive_seq=68285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.282 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=658080 sysload=0.53 cputime=173.682 memavail=1629664 print_time=4540.175 buffer_time=2.244 print_stall=0 extruder: target=215 temp=214.7 pwm=0.502
Stats 4530.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2395894 bytes_read=1261139 bytes_retransmit=9 bytes_invalid=0 send_seq=68305 receive_seq=68305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.525 rpi: temp=56.0 mcu_temp: temp=39.8 sd_pos=658142 sysload=0.49 cputime=173.736 memavail=1629628 print_time=4541.419 buffer_time=2.486 print_stall=0 extruder: target=215 temp=214.7 pwm=0.502
Stats 4531.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2396521 bytes_read=1261561 bytes_retransmit=9 bytes_invalid=0 send_seq=68326 receive_seq=68326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=658205 sysload=0.49 cputime=173.791 memavail=1629680 print_time=4542.631 buffer_time=2.696 print_stall=0 extruder: target=215 temp=214.7 pwm=0.570
Stats 4532.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2397154 bytes_read=1261972 bytes_retransmit=9 bytes_invalid=0 send_seq=68348 receive_seq=68348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.507 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=658266 sysload=0.49 cputime=173.845 memavail=1629676 print_time=4543.810 buffer_time=2.872 print_stall=0 extruder: target=215 temp=214.7 pwm=0.623
Stats 4533.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2397775 bytes_read=1262380 bytes_retransmit=9 bytes_invalid=0 send_seq=68370 receive_seq=68370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=658330 sysload=0.49 cputime=173.899 memavail=1629432 print_time=4544.954 buffer_time=3.012 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 4534.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2398025 bytes_read=1262767 bytes_retransmit=9 bytes_invalid=0 send_seq=68384 receive_seq=68384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.439 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=658330 sysload=0.49 cputime=173.952 memavail=1629440 print_time=4544.954 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 4535.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2398673 bytes_read=1263193 bytes_retransmit=9 bytes_invalid=0 send_seq=68406 receive_seq=68406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=57.0 mcu_temp: temp=40.0 sd_pos=658418 sysload=0.45 cputime=174.012 memavail=1629688 print_time=4546.064 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.8 pwm=0.531
Stats 4536.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2399254 bytes_read=1263580 bytes_retransmit=9 bytes_invalid=0 send_seq=68426 receive_seq=68426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=658480 sysload=0.45 cputime=174.067 memavail=1629184 print_time=4547.136 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 4537.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2399821 bytes_read=1263997 bytes_retransmit=9 bytes_invalid=0 send_seq=68446 receive_seq=68446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=658541 sysload=0.45 cputime=174.123 memavail=1629192 print_time=4548.164 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.7 pwm=0.632
Stats 4538.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2400444 bytes_read=1264403 bytes_retransmit=9 bytes_invalid=0 send_seq=68467 receive_seq=68467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=658602 sysload=0.45 cputime=174.180 memavail=1628940 print_time=4549.143 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 4539.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2401059 bytes_read=1264800 bytes_retransmit=9 bytes_invalid=0 send_seq=68489 receive_seq=68489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=658694 sysload=0.45 cputime=174.239 memavail=1629200 print_time=4550.106 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.8 pwm=0.528
Stats 4540.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2401962 bytes_read=1265276 bytes_retransmit=9 bytes_invalid=0 send_seq=68515 receive_seq=68515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=11 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.145 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=658818 sysload=0.41 cputime=174.299 memavail=1629164 print_time=4551.769 buffer_time=2.809 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 4541.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2402520 bytes_read=1265653 bytes_retransmit=9 bytes_invalid=0 send_seq=68533 receive_seq=68533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.003 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=658880 sysload=0.41 cputime=174.346 memavail=1628952 print_time=4552.516 buffer_time=2.555 print_stall=0 extruder: target=215 temp=214.8 pwm=0.562
Stats 4542.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2403119 bytes_read=1266040 bytes_retransmit=9 bytes_invalid=0 send_seq=68553 receive_seq=68553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=658968 sysload=0.41 cputime=174.380 memavail=1628952 print_time=4553.209 buffer_time=2.247 print_stall=0 extruder: target=215 temp=214.8 pwm=0.573
Stats 4543.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2404065 bytes_read=1266482 bytes_retransmit=9 bytes_invalid=0 send_seq=68578 receive_seq=68578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=40 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.687 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=659144 sysload=0.41 cputime=174.440 memavail=1629096 print_time=4554.334 buffer_time=2.371 print_stall=0 extruder: target=215 temp=214.8 pwm=0.573
Stats 4544.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2405366 bytes_read=1266938 bytes_retransmit=9 bytes_invalid=0 send_seq=68609 receive_seq=68609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=60 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=659394 sysload=0.41 cputime=174.481 memavail=1628744 print_time=4555.120 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.8 pwm=0.585
Stats 4545.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2406625 bytes_read=1267400 bytes_retransmit=9 bytes_invalid=0 send_seq=68641 receive_seq=68641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=60 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=659573 sysload=0.38 cputime=174.544 memavail=1629084 print_time=4556.106 buffer_time=2.142 print_stall=0 extruder: target=215 temp=214.8 pwm=0.611
Stats 4546.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2407750 bytes_read=1267862 bytes_retransmit=9 bytes_invalid=0 send_seq=68670 receive_seq=68670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=50 freq=71996394 heater_bed: target=55 temp=54.8 pwm=0.677 rpi: temp=56.0 mcu_temp: temp=39.5 sd_pos=660038 sysload=0.38 cputime=174.606 memavail=1628804 print_time=4557.137 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.0 pwm=0.407
Stats 4547.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2408412 bytes_read=1268273 bytes_retransmit=9 bytes_invalid=0 send_seq=68692 receive_seq=68692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=20 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=660323 sysload=0.38 cputime=174.668 memavail=1629024 print_time=4558.008 buffer_time=2.043 print_stall=0 extruder: target=215 temp=214.8 pwm=0.569
Stats 4548.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2409077 bytes_read=1268660 bytes_retransmit=9 bytes_invalid=0 send_seq=68712 receive_seq=68712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.535 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=660630 sysload=0.38 cputime=174.731 memavail=1629008 print_time=4559.055 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 4549.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=2409720 bytes_read=1269072 bytes_retransmit=9 bytes_invalid=0 send_seq=68731 receive_seq=68731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=39.8 sd_pos=660966 sysload=0.38 cputime=174.795 memavail=1629272 print_time=4560.146 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 4550.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2410372 bytes_read=1269483 bytes_retransmit=9 bytes_invalid=0 send_seq=68750 receive_seq=68750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.463 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=661278 sysload=0.35 cputime=174.854 memavail=1629028 print_time=4561.148 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 4551.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2411331 bytes_read=1269905 bytes_retransmit=9 bytes_invalid=0 send_seq=68777 receive_seq=68777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=661689 sysload=0.35 cputime=174.895 memavail=1629028 print_time=4562.297 buffer_time=2.329 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 4552.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2411896 bytes_read=1270326 bytes_retransmit=9 bytes_invalid=0 send_seq=68795 receive_seq=68795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=661941 sysload=0.35 cputime=174.957 memavail=1628788 print_time=4562.968 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.2 pwm=0.401
Stats 4553.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2412535 bytes_read=1270713 bytes_retransmit=9 bytes_invalid=0 send_seq=68815 receive_seq=68815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.483 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=662248 sysload=0.35 cputime=175.018 memavail=1628768 print_time=4564.041 buffer_time=2.073 print_stall=0 extruder: target=215 temp=215.3 pwm=0.413
Stats 4554.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2413161 bytes_read=1271100 bytes_retransmit=9 bytes_invalid=0 send_seq=68835 receive_seq=68835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.642 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=662521 sysload=0.35 cputime=175.057 memavail=1629000 print_time=4564.981 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.3 pwm=0.514
Stats 4555.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2413839 bytes_read=1271546 bytes_retransmit=9 bytes_invalid=0 send_seq=68855 receive_seq=68855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.339 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=662833 sysload=0.32 cputime=175.124 memavail=1629272 print_time=4566.008 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.7 pwm=0.366
Stats 4556.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2414675 bytes_read=1271948 bytes_retransmit=9 bytes_invalid=0 send_seq=68878 receive_seq=68878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=663220 sysload=0.32 cputime=175.188 memavail=1629584 print_time=4567.245 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.6 pwm=0.489
Stats 4557.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2415334 bytes_read=1272345 bytes_retransmit=9 bytes_invalid=0 send_seq=68900 receive_seq=68900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=55.0 mcu_temp: temp=39.7 sd_pos=663443 sysload=0.32 cputime=175.251 memavail=1629324 print_time=4568.098 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.8 pwm=0.352
Stats 4558.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2415894 bytes_read=1272776 bytes_retransmit=9 bytes_invalid=0 send_seq=68920 receive_seq=68920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=55.0 mcu_temp: temp=40.0 sd_pos=663659 sysload=0.32 cputime=175.314 memavail=1629040 print_time=4569.197 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.7 pwm=0.473
Stats 4559.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2416433 bytes_read=1273153 bytes_retransmit=9 bytes_invalid=0 send_seq=68938 receive_seq=68938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=663871 sysload=0.32 cputime=175.377 memavail=1628808 print_time=4570.177 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.6 pwm=0.543
Stats 4560.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=2416984 bytes_read=1273555 bytes_retransmit=9 bytes_invalid=0 send_seq=68958 receive_seq=68958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=664149 sysload=0.37 cputime=175.441 memavail=1629032 print_time=4571.276 buffer_time=2.303 print_stall=0 extruder: target=215 temp=215.8 pwm=0.464
Stats 4561.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=2417501 bytes_read=1273976 bytes_retransmit=9 bytes_invalid=0 send_seq=68976 receive_seq=68976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.280 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=664273 sysload=0.37 cputime=175.501 memavail=1629312 print_time=4572.009 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.7 pwm=0.477
Stats 4562.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=2418665 bytes_read=1274408 bytes_retransmit=9 bytes_invalid=0 send_seq=69005 receive_seq=69005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.1 pwm=0.212 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=664731 sysload=0.37 cputime=175.566 memavail=1629064 print_time=4573.410 buffer_time=2.435 print_stall=0 extruder: target=215 temp=216.0 pwm=0.310
Stats 4563.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=2419594 bytes_read=1274830 bytes_retransmit=9 bytes_invalid=0 send_seq=69032 receive_seq=69032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.527 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=664955 sysload=0.37 cputime=175.604 memavail=1629328 print_time=4574.027 buffer_time=2.050 print_stall=0 extruder: target=215 temp=216.0 pwm=0.313
Stats 4564.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000055 bytes_write=2420736 bytes_read=1275306 bytes_retransmit=9 bytes_invalid=0 send_seq=69061 receive_seq=69061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.0 pwm=0.619 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=665177 sysload=0.37 cputime=175.644 memavail=1629312 print_time=4575.308 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.7 pwm=0.480
Stats 4565.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2421651 bytes_read=1275728 bytes_retransmit=9 bytes_invalid=0 send_seq=69085 receive_seq=69085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996405 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=665299 sysload=0.34 cputime=175.709 memavail=1629604 print_time=4576.323 buffer_time=2.345 print_stall=0 extruder: target=215 temp=215.7 pwm=0.480
Stats 4566.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2422617 bytes_read=1276160 bytes_retransmit=9 bytes_invalid=0 send_seq=69111 receive_seq=69111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=11 freq=71996406 heater_bed: target=55 temp=54.9 pwm=0.528 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=665455 sysload=0.34 cputime=175.775 memavail=1629580 print_time=4577.439 buffer_time=2.461 print_stall=0 extruder: target=215 temp=215.6 pwm=0.480
Stats 4567.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2423297 bytes_read=1276581 bytes_retransmit=9 bytes_invalid=0 send_seq=69132 receive_seq=69132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=665517 sysload=0.34 cputime=175.837 memavail=1629360 print_time=4578.014 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.6 pwm=0.480
Stats 4568.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2424341 bytes_read=1277008 bytes_retransmit=9 bytes_invalid=0 send_seq=69160 receive_seq=69160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.346 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=665707 sysload=0.34 cputime=175.900 memavail=1629088 print_time=4579.210 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.4 pwm=0.556
Stats 4569.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2425387 bytes_read=1277455 bytes_retransmit=9 bytes_invalid=0 send_seq=69189 receive_seq=69189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996404 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=665862 sysload=0.34 cputime=175.962 memavail=1629320 print_time=4580.456 buffer_time=2.476 print_stall=0 extruder: target=215 temp=215.5 pwm=0.422
Stats 4570.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2426109 bytes_read=1277896 bytes_retransmit=9 bytes_invalid=0 send_seq=69211 receive_seq=69211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=54.9 pwm=0.450 rpi: temp=56.5 mcu_temp: temp=39.7 sd_pos=665926 sysload=0.32 cputime=176.021 memavail=1628844 print_time=4581.085 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.4 pwm=0.514
Stats 4571.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2427124 bytes_read=1278318 bytes_retransmit=9 bytes_invalid=0 send_seq=69238 receive_seq=69238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=666052 sysload=0.32 cputime=176.083 memavail=1628864 print_time=4582.342 buffer_time=2.360 print_stall=0 extruder: target=215 temp=215.4 pwm=0.389
Stats 4572.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2427803 bytes_read=1278735 bytes_retransmit=9 bytes_invalid=0 send_seq=69261 receive_seq=69261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=666176 sysload=0.32 cputime=176.141 memavail=1628828 print_time=4582.983 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.3 pwm=0.471
Stats 4573.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2428825 bytes_read=1279181 bytes_retransmit=9 bytes_invalid=0 send_seq=69287 receive_seq=69287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=56.5 mcu_temp: temp=39.9 sd_pos=666332 sysload=0.32 cputime=176.177 memavail=1629092 print_time=4584.198 buffer_time=2.214 print_stall=0 extruder: target=215 temp=215.2 pwm=0.503
Stats 4574.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000059 bytes_write=2429847 bytes_read=1279593 bytes_retransmit=9 bytes_invalid=0 send_seq=69312 receive_seq=69312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=54.9 pwm=0.498 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=666489 sysload=0.32 cputime=176.240 memavail=1629092 print_time=4585.374 buffer_time=2.388 print_stall=0 extruder: target=215 temp=215.2 pwm=0.508
Stats 4575.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2430844 bytes_read=1280040 bytes_retransmit=9 bytes_invalid=0 send_seq=69338 receive_seq=69338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=666643 sysload=0.29 cputime=176.304 memavail=1629332 print_time=4586.469 buffer_time=2.483 print_stall=0 extruder: target=215 temp=215.3 pwm=0.451
Stats 4576.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2431791 bytes_read=1280491 bytes_retransmit=9 bytes_invalid=0 send_seq=69365 receive_seq=69365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.9 pwm=0.505 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=666794 sysload=0.29 cputime=176.360 memavail=1629344 print_time=4587.464 buffer_time=2.478 print_stall=0 extruder: target=215 temp=215.1 pwm=0.618
Stats 4577.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2432745 bytes_read=1280903 bytes_retransmit=9 bytes_invalid=0 send_seq=69390 receive_seq=69390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.627 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=666917 sysload=0.29 cputime=176.420 memavail=1629060 print_time=4588.264 buffer_time=2.277 print_stall=0 extruder: target=215 temp=215.2 pwm=0.443
Stats 4578.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2434148 bytes_read=1281380 bytes_retransmit=9 bytes_invalid=0 send_seq=69425 receive_seq=69425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=39.6 sd_pos=667144 sysload=0.29 cputime=176.482 memavail=1629048 print_time=4589.506 buffer_time=2.518 print_stall=0 extruder: target=215 temp=215.1 pwm=0.534
Stats 4579.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=2434785 bytes_read=1281791 bytes_retransmit=9 bytes_invalid=0 send_seq=69444 receive_seq=69444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=667206 sysload=0.29 cputime=176.540 memavail=1629292 print_time=4590.136 buffer_time=2.148 print_stall=0 extruder: target=215 temp=215.2 pwm=0.392
Stats 4580.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2435542 bytes_read=1282198 bytes_retransmit=9 bytes_invalid=0 send_seq=69465 receive_seq=69465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=667360 sysload=0.27 cputime=176.599 memavail=1629552 print_time=4591.743 buffer_time=2.754 print_stall=0 extruder: target=215 temp=215.1 pwm=0.516
Stats 4581.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2436058 bytes_read=1282585 bytes_retransmit=9 bytes_invalid=0 send_seq=69482 receive_seq=69482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=667422 sysload=0.27 cputime=176.655 memavail=1629308 print_time=4592.645 buffer_time=2.655 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 4582.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2436609 bytes_read=1282996 bytes_retransmit=9 bytes_invalid=0 send_seq=69501 receive_seq=69501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.680 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=667484 sysload=0.27 cputime=176.694 memavail=1629292 print_time=4593.641 buffer_time=2.651 print_stall=0 extruder: target=215 temp=215.2 pwm=0.436
Stats 4583.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2437145 bytes_read=1283368 bytes_retransmit=9 bytes_invalid=0 send_seq=69518 receive_seq=69518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=667546 sysload=0.27 cputime=176.726 memavail=1629844 print_time=4594.711 buffer_time=2.720 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 4584.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=2437705 bytes_read=1283760 bytes_retransmit=9 bytes_invalid=0 send_seq=69538 receive_seq=69538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.489 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=667639 sysload=0.27 cputime=176.785 memavail=1629624 print_time=4595.875 buffer_time=2.883 print_stall=0 extruder: target=215 temp=215.2 pwm=0.451
Stats 4585.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=2438248 bytes_read=1284164 bytes_retransmit=9 bytes_invalid=0 send_seq=69555 receive_seq=69555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.328 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=667700 sysload=0.25 cputime=176.843 memavail=1629608 print_time=4597.056 buffer_time=3.063 print_stall=0 extruder: target=215 temp=215.2 pwm=0.451
Stats 4586.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=2438503 bytes_read=1284511 bytes_retransmit=9 bytes_invalid=0 send_seq=69569 receive_seq=69569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.276 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=667700 sysload=0.25 cputime=176.897 memavail=1629092 print_time=4597.056 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.4 pwm=0.305
Stats 4587.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=2439089 bytes_read=1284909 bytes_retransmit=9 bytes_invalid=0 send_seq=69590 receive_seq=69590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=667761 sysload=0.25 cputime=176.954 memavail=1629040 print_time=4598.303 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.3 pwm=0.399
Stats 4588.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=2439645 bytes_read=1285315 bytes_retransmit=9 bytes_invalid=0 send_seq=69608 receive_seq=69608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.268 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=667823 sysload=0.25 cputime=176.985 memavail=1629196 print_time=4599.602 buffer_time=2.607 print_stall=0 extruder: target=215 temp=215.4 pwm=0.356
Stats 4589.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=2440186 bytes_read=1285702 bytes_retransmit=9 bytes_invalid=0 send_seq=69628 receive_seq=69628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.260 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=667883 sysload=0.25 cputime=177.042 memavail=1629292 print_time=4600.951 buffer_time=2.956 print_stall=0 extruder: target=215 temp=215.2 pwm=0.526
Stats 4590.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2440771 bytes_read=1286124 bytes_retransmit=9 bytes_invalid=0 send_seq=69649 receive_seq=69649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996412 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=667973 sysload=0.23 cputime=177.099 memavail=1629536 print_time=4602.352 buffer_time=3.356 print_stall=0 extruder: target=215 temp=215.3 pwm=0.463
Stats 4591.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2441021 bytes_read=1286505 bytes_retransmit=9 bytes_invalid=0 send_seq=69662 receive_seq=69662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996414 heater_bed: target=55 temp=55.0 pwm=0.654 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=667973 sysload=0.23 cputime=177.152 memavail=1629664 print_time=4602.352 buffer_time=2.356 print_stall=0 extruder: target=215 temp=215.4 pwm=0.408
Stats 4592.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2441565 bytes_read=1286887 bytes_retransmit=9 bytes_invalid=0 send_seq=69681 receive_seq=69681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=668035 sysload=0.23 cputime=177.207 memavail=1628820 print_time=4603.795 buffer_time=2.799 print_stall=0 extruder: target=215 temp=215.3 pwm=0.462
Stats 4593.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2442100 bytes_read=1287295 bytes_retransmit=9 bytes_invalid=0 send_seq=69700 receive_seq=69700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=668099 sysload=0.23 cputime=177.242 memavail=1628828 print_time=4605.271 buffer_time=3.275 print_stall=0 extruder: target=215 temp=215.2 pwm=0.524
Stats 4594.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2442341 bytes_read=1287676 bytes_retransmit=9 bytes_invalid=0 send_seq=69713 receive_seq=69713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=668099 sysload=0.23 cputime=177.295 memavail=1629300 print_time=4605.271 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.2 pwm=0.409
Stats 4595.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2442945 bytes_read=1288083 bytes_retransmit=9 bytes_invalid=0 send_seq=69734 receive_seq=69734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=668161 sysload=0.29 cputime=177.355 memavail=1629640 print_time=4606.784 buffer_time=2.786 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 4596.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2443487 bytes_read=1288475 bytes_retransmit=9 bytes_invalid=0 send_seq=69752 receive_seq=69752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=54.9 pwm=0.592 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=668225 sysload=0.29 cputime=177.414 memavail=1629876 print_time=4608.333 buffer_time=3.334 print_stall=0 extruder: target=215 temp=215.2 pwm=0.441
Stats 4597.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2443761 bytes_read=1288856 bytes_retransmit=9 bytes_invalid=0 send_seq=69765 receive_seq=69765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=55.0 pwm=0.041 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=668225 sysload=0.29 cputime=177.467 memavail=1629384 print_time=4608.333 buffer_time=2.334 print_stall=0 extruder: target=215 temp=215.1 pwm=0.557
Stats 4598.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2444375 bytes_read=1289248 bytes_retransmit=9 bytes_invalid=0 send_seq=69786 receive_seq=69786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=54.9 pwm=0.415 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=668286 sysload=0.29 cputime=177.522 memavail=1629636 print_time=4609.917 buffer_time=2.917 print_stall=0 extruder: target=215 temp=215.0 pwm=0.536
Stats 4599.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2444856 bytes_read=1289635 bytes_retransmit=9 bytes_invalid=0 send_seq=69803 receive_seq=69803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=668318 sysload=0.29 cputime=177.556 memavail=1629388 print_time=4611.287 buffer_time=3.287 print_stall=0 extruder: target=215 temp=215.0 pwm=0.536
Stats 4600.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2445139 bytes_read=1290031 bytes_retransmit=9 bytes_invalid=0 send_seq=69816 receive_seq=69816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.040 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=668318 sysload=0.35 cputime=177.609 memavail=1629640 print_time=4611.287 buffer_time=2.286 print_stall=0 extruder: target=215 temp=215.0 pwm=0.541
Stats 4601.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2445834 bytes_read=1290428 bytes_retransmit=9 bytes_invalid=0 send_seq=69838 receive_seq=69838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=668443 sysload=0.35 cputime=177.668 memavail=1629388 print_time=4613.189 buffer_time=3.187 print_stall=0 extruder: target=215 temp=215.2 pwm=0.396
Stats 4602.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2446061 bytes_read=1290805 bytes_retransmit=9 bytes_invalid=0 send_seq=69853 receive_seq=69853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.062 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=668443 sysload=0.35 cputime=177.720 memavail=1629132 print_time=4613.189 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 4603.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2446692 bytes_read=1291226 bytes_retransmit=9 bytes_invalid=0 send_seq=69874 receive_seq=69874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=668507 sysload=0.35 cputime=177.754 memavail=1629080 print_time=4614.865 buffer_time=2.861 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 4604.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=2447274 bytes_read=1291608 bytes_retransmit=9 bytes_invalid=0 send_seq=69893 receive_seq=69893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=668569 sysload=0.35 cputime=177.811 memavail=1628828 print_time=4616.565 buffer_time=3.560 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 4605.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=2447563 bytes_read=1292000 bytes_retransmit=9 bytes_invalid=0 send_seq=69908 receive_seq=69908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996399 heater_bed: target=55 temp=54.9 pwm=0.740 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=668569 sysload=0.32 cputime=177.863 memavail=1628828 print_time=4616.565 buffer_time=2.560 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 4606.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=2448137 bytes_read=1292406 bytes_retransmit=9 bytes_invalid=0 send_seq=69926 receive_seq=69926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=668633 sysload=0.32 cputime=177.919 memavail=1628828 print_time=4618.289 buffer_time=3.284 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 4607.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=2448420 bytes_read=1292773 bytes_retransmit=9 bytes_invalid=0 send_seq=69942 receive_seq=69942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=668633 sysload=0.32 cputime=177.973 memavail=1628576 print_time=4618.289 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.2 pwm=0.344
Stats 4608.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=2449000 bytes_read=1293185 bytes_retransmit=9 bytes_invalid=0 send_seq=69961 receive_seq=69961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.207 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=668695 sysload=0.32 cputime=178.029 memavail=1629080 print_time=4620.039 buffer_time=3.031 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 4609.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=2449209 bytes_read=1293551 bytes_retransmit=9 bytes_invalid=0 send_seq=69974 receive_seq=69974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=668695 sysload=0.32 cputime=178.062 memavail=1629072 print_time=4620.039 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 4610.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2449869 bytes_read=1293958 bytes_retransmit=9 bytes_invalid=0 send_seq=69995 receive_seq=69995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=668758 sysload=0.29 cputime=178.121 memavail=1628828 print_time=4621.813 buffer_time=2.804 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 4611.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2450423 bytes_read=1294365 bytes_retransmit=9 bytes_invalid=0 send_seq=70013 receive_seq=70013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.460 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=668822 sysload=0.29 cputime=178.178 memavail=1629092 print_time=4623.626 buffer_time=3.616 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 4612.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2450690 bytes_read=1294731 bytes_retransmit=9 bytes_invalid=0 send_seq=70026 receive_seq=70026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.651 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=668822 sysload=0.29 cputime=178.228 memavail=1629860 print_time=4623.626 buffer_time=2.615 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 4613.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2451506 bytes_read=1295138 bytes_retransmit=9 bytes_invalid=0 send_seq=70050 receive_seq=70050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.636 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=668885 sysload=0.29 cputime=178.280 memavail=1629596 print_time=4624.640 buffer_time=2.628 print_stall=0 extruder: target=215 temp=215.1 pwm=0.403
Stats 4614.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2452055 bytes_read=1295555 bytes_retransmit=9 bytes_invalid=0 send_seq=70070 receive_seq=70070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=668975 sysload=0.29 cputime=178.336 memavail=1629832 print_time=4625.442 buffer_time=2.430 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 4615.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2452638 bytes_read=1295966 bytes_retransmit=9 bytes_invalid=0 send_seq=70089 receive_seq=70089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=669039 sysload=0.27 cputime=178.391 memavail=1629840 print_time=4626.195 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.8 pwm=0.593
Stats 4616.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2453433 bytes_read=1296368 bytes_retransmit=9 bytes_invalid=0 send_seq=70112 receive_seq=70112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.021 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=669162 sysload=0.27 cputime=178.447 memavail=1629284 print_time=4627.646 buffer_time=2.633 print_stall=0 extruder: target=215 temp=215.2 pwm=0.265
Stats 4617.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2453972 bytes_read=1296780 bytes_retransmit=9 bytes_invalid=0 send_seq=70131 receive_seq=70131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=669221 sysload=0.27 cputime=178.503 memavail=1629308 print_time=4628.349 buffer_time=2.335 print_stall=0 extruder: target=215 temp=214.7 pwm=0.640
Stats 4618.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2454615 bytes_read=1297186 bytes_retransmit=9 bytes_invalid=0 send_seq=70152 receive_seq=70152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=669348 sysload=0.27 cputime=178.561 memavail=1629056 print_time=4629.066 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 4619.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2455424 bytes_read=1297588 bytes_retransmit=9 bytes_invalid=0 send_seq=70175 receive_seq=70175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=669468 sysload=0.27 cputime=178.619 memavail=1629304 print_time=4630.371 buffer_time=2.355 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 4620.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2455984 bytes_read=1298015 bytes_retransmit=9 bytes_invalid=0 send_seq=70194 receive_seq=70194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=669560 sysload=0.33 cputime=178.678 memavail=1628808 print_time=4631.028 buffer_time=2.013 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 4621.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2456870 bytes_read=1298431 bytes_retransmit=9 bytes_invalid=0 send_seq=70217 receive_seq=70217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=669684 sysload=0.33 cputime=178.738 memavail=1628712 print_time=4632.295 buffer_time=2.278 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 4622.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2457776 bytes_read=1298843 bytes_retransmit=9 bytes_invalid=0 send_seq=70242 receive_seq=70242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=669838 sysload=0.33 cputime=178.796 memavail=1628980 print_time=4633.528 buffer_time=2.510 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 4623.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2458395 bytes_read=1299260 bytes_retransmit=9 bytes_invalid=0 send_seq=70262 receive_seq=70262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.177 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=669898 sysload=0.33 cputime=178.852 memavail=1629064 print_time=4634.140 buffer_time=2.121 print_stall=0 extruder: target=215 temp=214.9 pwm=0.553
Stats 4624.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2459235 bytes_read=1299676 bytes_retransmit=9 bytes_invalid=0 send_seq=70285 receive_seq=70285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.639 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=670020 sysload=0.33 cputime=178.908 memavail=1629020 print_time=4635.352 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 4625.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=2460105 bytes_read=1300098 bytes_retransmit=9 bytes_invalid=0 send_seq=70309 receive_seq=70309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.106 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=670143 sysload=0.38 cputime=178.965 memavail=1628768 print_time=4636.546 buffer_time=2.526 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 4626.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=2460761 bytes_read=1300520 bytes_retransmit=9 bytes_invalid=0 send_seq=70330 receive_seq=70330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=670205 sysload=0.38 cputime=179.001 memavail=1628960 print_time=4637.140 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 4627.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=2461624 bytes_read=1300936 bytes_retransmit=9 bytes_invalid=0 send_seq=70353 receive_seq=70353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=670329 sysload=0.38 cputime=179.056 memavail=1628960 print_time=4638.327 buffer_time=2.305 print_stall=0 extruder: target=215 temp=215.0 pwm=0.458
Stats 4628.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=2462513 bytes_read=1301343 bytes_retransmit=9 bytes_invalid=0 send_seq=70377 receive_seq=70377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=670482 sysload=0.38 cputime=179.113 memavail=1628700 print_time=4639.516 buffer_time=2.494 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 4629.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000046 bytes_write=2463141 bytes_read=1301760 bytes_retransmit=9 bytes_invalid=0 send_seq=70397 receive_seq=70397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=670573 sysload=0.38 cputime=179.169 memavail=1628760 print_time=4640.114 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.0 pwm=0.525
Stats 4630.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2464043 bytes_read=1302196 bytes_retransmit=9 bytes_invalid=0 send_seq=70421 receive_seq=70421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=55.0 mcu_temp: temp=40.3 sd_pos=670697 sysload=0.35 cputime=179.223 memavail=1628768 print_time=4641.315 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.2 pwm=0.420
Stats 4631.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2464898 bytes_read=1302603 bytes_retransmit=9 bytes_invalid=0 send_seq=70445 receive_seq=70445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=670819 sysload=0.35 cputime=179.284 memavail=1628788 print_time=4642.531 buffer_time=2.506 print_stall=0 extruder: target=215 temp=215.1 pwm=0.510
Stats 4632.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2465577 bytes_read=1303025 bytes_retransmit=9 bytes_invalid=0 send_seq=70466 receive_seq=70466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=670881 sysload=0.35 cputime=179.341 memavail=1628972 print_time=4643.145 buffer_time=2.120 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 4633.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2466426 bytes_read=1303451 bytes_retransmit=9 bytes_invalid=0 send_seq=70491 receive_seq=70491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=54.9 pwm=0.547 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=671002 sysload=0.35 cputime=179.378 memavail=1628980 print_time=4644.393 buffer_time=2.367 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 4634.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2467068 bytes_read=1303853 bytes_retransmit=9 bytes_invalid=0 send_seq=70514 receive_seq=70514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=671064 sysload=0.35 cputime=179.433 memavail=1629300 print_time=4645.031 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 4635.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=2467925 bytes_read=1304300 bytes_retransmit=9 bytes_invalid=0 send_seq=70537 receive_seq=70537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=671212 sysload=0.32 cputime=179.493 memavail=1629040 print_time=4646.345 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 4636.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=2468812 bytes_read=1304726 bytes_retransmit=9 bytes_invalid=0 send_seq=70562 receive_seq=70562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.208 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=671364 sysload=0.32 cputime=179.551 memavail=1629048 print_time=4647.713 buffer_time=2.684 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 4637.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=2469375 bytes_read=1305108 bytes_retransmit=9 bytes_invalid=0 send_seq=70581 receive_seq=70581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.088 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=671423 sysload=0.32 cputime=179.605 memavail=1629100 print_time=4648.442 buffer_time=2.413 print_stall=0 extruder: target=215 temp=215.2 pwm=0.308
Stats 4638.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=2470057 bytes_read=1305545 bytes_retransmit=9 bytes_invalid=0 send_seq=70605 receive_seq=70605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=671516 sysload=0.32 cputime=179.661 memavail=1628856 print_time=4649.193 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 4639.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=2470946 bytes_read=1305961 bytes_retransmit=9 bytes_invalid=0 send_seq=70628 receive_seq=70628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.070 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=671637 sysload=0.32 cputime=179.718 memavail=1629108 print_time=4651.790 buffer_time=3.760 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 4640.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2471193 bytes_read=1306323 bytes_retransmit=9 bytes_invalid=0 send_seq=70640 receive_seq=70640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=671637 sysload=0.30 cputime=179.772 memavail=1629624 print_time=4651.790 buffer_time=2.759 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 4641.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2471778 bytes_read=1306740 bytes_retransmit=9 bytes_invalid=0 send_seq=70660 receive_seq=70660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.114 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=671761 sysload=0.30 cputime=179.831 memavail=1629568 print_time=4652.610 buffer_time=2.578 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 4642.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2472315 bytes_read=1307131 bytes_retransmit=9 bytes_invalid=0 send_seq=70678 receive_seq=70678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.496 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=671823 sysload=0.30 cputime=179.884 memavail=1630056 print_time=4653.327 buffer_time=2.295 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 4643.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2472897 bytes_read=1307505 bytes_retransmit=9 bytes_invalid=0 send_seq=70696 receive_seq=70696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.092 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=671885 sysload=0.30 cputime=179.916 memavail=1630080 print_time=4654.041 buffer_time=2.008 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 4644.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2473688 bytes_read=1307925 bytes_retransmit=9 bytes_invalid=0 send_seq=70719 receive_seq=70719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=672039 sysload=0.30 cputime=179.972 memavail=1630140 print_time=4655.416 buffer_time=2.382 print_stall=0 extruder: target=215 temp=214.7 pwm=0.603
Stats 4645.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2474259 bytes_read=1308330 bytes_retransmit=9 bytes_invalid=0 send_seq=70739 receive_seq=70739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.136 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=672101 sysload=0.27 cputime=180.030 memavail=1630108 print_time=4656.073 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.9 pwm=0.433
Stats 4646.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2475057 bytes_read=1308712 bytes_retransmit=9 bytes_invalid=0 send_seq=70760 receive_seq=70760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.574 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=672228 sysload=0.27 cputime=180.087 memavail=1630148 print_time=4657.372 buffer_time=2.335 print_stall=0 extruder: target=215 temp=214.9 pwm=0.433
Stats 4647.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2475923 bytes_read=1309144 bytes_retransmit=9 bytes_invalid=0 send_seq=70784 receive_seq=70784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.617 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=672387 sysload=0.27 cputime=180.144 memavail=1629896 print_time=4658.624 buffer_time=2.587 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 4648.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2476523 bytes_read=1309535 bytes_retransmit=9 bytes_invalid=0 send_seq=70802 receive_seq=70802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.647 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=672451 sysload=0.27 cputime=180.195 memavail=1629900 print_time=4659.238 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 4649.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=2477433 bytes_read=1309947 bytes_retransmit=9 bytes_invalid=0 send_seq=70827 receive_seq=70827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=672606 sysload=0.27 cputime=180.251 memavail=1629640 print_time=4660.470 buffer_time=2.432 print_stall=0 extruder: target=215 temp=214.8 pwm=0.582
Stats 4650.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2478038 bytes_read=1310384 bytes_retransmit=9 bytes_invalid=0 send_seq=70848 receive_seq=70848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.630 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=672670 sysload=0.25 cputime=180.306 memavail=1629856 print_time=4661.057 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 4651.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2478915 bytes_read=1310805 bytes_retransmit=9 bytes_invalid=0 send_seq=70872 receive_seq=70872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=672830 sysload=0.25 cputime=180.364 memavail=1630152 print_time=4662.254 buffer_time=2.216 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 4652.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2479816 bytes_read=1311222 bytes_retransmit=9 bytes_invalid=0 send_seq=70898 receive_seq=70898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.630 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=672957 sysload=0.25 cputime=180.421 memavail=1629108 print_time=4663.441 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 4653.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2480769 bytes_read=1311669 bytes_retransmit=9 bytes_invalid=0 send_seq=70924 receive_seq=70924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.095 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=673081 sysload=0.25 cputime=180.475 memavail=1629404 print_time=4664.628 buffer_time=2.589 print_stall=0 extruder: target=215 temp=215.0 pwm=0.402
Stats 4654.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2481386 bytes_read=1312091 bytes_retransmit=9 bytes_invalid=0 send_seq=70946 receive_seq=70946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=673144 sysload=0.25 cputime=180.529 memavail=1629404 print_time=4665.222 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.1 pwm=0.389
Stats 4655.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2482362 bytes_read=1312528 bytes_retransmit=9 bytes_invalid=0 send_seq=70973 receive_seq=70973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.028 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=673271 sysload=0.23 cputime=180.585 memavail=1629408 print_time=4666.414 buffer_time=2.374 print_stall=0 extruder: target=215 temp=215.2 pwm=0.424
Stats 4656.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2483290 bytes_read=1312975 bytes_retransmit=9 bytes_invalid=0 send_seq=70999 receive_seq=70999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=673460 sysload=0.23 cputime=180.621 memavail=1629412 print_time=4667.635 buffer_time=2.593 print_stall=0 extruder: target=215 temp=214.8 pwm=0.658
Stats 4657.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2483946 bytes_read=1313386 bytes_retransmit=9 bytes_invalid=0 send_seq=71021 receive_seq=71021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=673524 sysload=0.23 cputime=180.676 memavail=1629412 print_time=4668.233 buffer_time=2.191 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 4658.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2484820 bytes_read=1313788 bytes_retransmit=9 bytes_invalid=0 send_seq=71044 receive_seq=71044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=673650 sysload=0.23 cputime=180.735 memavail=1629412 print_time=4669.453 buffer_time=2.410 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 4659.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2485420 bytes_read=1314205 bytes_retransmit=9 bytes_invalid=0 send_seq=71064 receive_seq=71064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=673713 sysload=0.23 cputime=180.787 memavail=1629160 print_time=4670.065 buffer_time=2.022 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 4660.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2486341 bytes_read=1314651 bytes_retransmit=9 bytes_invalid=0 send_seq=71090 receive_seq=71090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=673903 sysload=0.21 cputime=180.844 memavail=1629160 print_time=4671.318 buffer_time=2.272 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 4661.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2487194 bytes_read=1315063 bytes_retransmit=9 bytes_invalid=0 send_seq=71115 receive_seq=71115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.193 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=674057 sysload=0.21 cputime=180.899 memavail=1629472 print_time=4672.576 buffer_time=2.529 print_stall=0 extruder: target=215 temp=215.0 pwm=0.460
Stats 4662.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2487834 bytes_read=1315490 bytes_retransmit=9 bytes_invalid=0 send_seq=71137 receive_seq=71137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=674119 sysload=0.21 cputime=180.953 memavail=1629444 print_time=4673.219 buffer_time=2.172 print_stall=0 extruder: target=215 temp=214.9 pwm=0.455
Stats 4663.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2488616 bytes_read=1315901 bytes_retransmit=9 bytes_invalid=0 send_seq=71159 receive_seq=71159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=674245 sysload=0.21 cputime=180.988 memavail=1629472 print_time=4674.539 buffer_time=2.491 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 4664.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2489172 bytes_read=1316278 bytes_retransmit=9 bytes_invalid=0 send_seq=71177 receive_seq=71177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.103 rpi: temp=56.5 mcu_temp: temp=40.2 sd_pos=674306 sysload=0.21 cputime=181.043 memavail=1629668 print_time=4675.214 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 4665.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2490030 bytes_read=1316740 bytes_retransmit=9 bytes_invalid=0 send_seq=71203 receive_seq=71203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=674495 sysload=0.19 cputime=181.081 memavail=1629988 print_time=4676.736 buffer_time=2.686 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 4666.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2490576 bytes_read=1317141 bytes_retransmit=9 bytes_invalid=0 send_seq=71223 receive_seq=71223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=674559 sysload=0.19 cputime=181.116 memavail=1630304 print_time=4677.541 buffer_time=2.491 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 4667.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2491218 bytes_read=1317533 bytes_retransmit=9 bytes_invalid=0 send_seq=71244 receive_seq=71244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=674621 sysload=0.19 cputime=181.171 memavail=1630536 print_time=4679.291 buffer_time=3.240 print_stall=0 extruder: target=215 temp=215.2 pwm=0.420
Stats 4668.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2491475 bytes_read=1317930 bytes_retransmit=9 bytes_invalid=0 send_seq=71260 receive_seq=71260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=674621 sysload=0.19 cputime=181.222 memavail=1630556 print_time=4679.291 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 4669.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2492121 bytes_read=1318341 bytes_retransmit=9 bytes_invalid=0 send_seq=71282 receive_seq=71282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=674685 sysload=0.19 cputime=181.275 memavail=1630052 print_time=4681.016 buffer_time=2.963 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 4670.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2492665 bytes_read=1318743 bytes_retransmit=9 bytes_invalid=0 send_seq=71302 receive_seq=71302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.0 sd_pos=674747 sysload=0.18 cputime=181.330 memavail=1630048 print_time=4682.716 buffer_time=3.662 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 4671.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2493009 bytes_read=1319145 bytes_retransmit=9 bytes_invalid=0 send_seq=71319 receive_seq=71319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.247 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=674747 sysload=0.18 cputime=181.380 memavail=1630052 print_time=4682.716 buffer_time=2.662 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 4672.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2493602 bytes_read=1319546 bytes_retransmit=9 bytes_invalid=0 send_seq=71339 receive_seq=71339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=0.966 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=674811 sysload=0.18 cputime=181.436 memavail=1630328 print_time=4684.391 buffer_time=3.337 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 4673.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2493843 bytes_read=1319903 bytes_retransmit=9 bytes_invalid=0 send_seq=71353 receive_seq=71353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=674811 sysload=0.18 cputime=181.484 memavail=1629844 print_time=4684.391 buffer_time=2.336 print_stall=0 extruder: target=215 temp=214.8 pwm=0.615
Stats 4674.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2494482 bytes_read=1320330 bytes_retransmit=9 bytes_invalid=0 send_seq=71375 receive_seq=71375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.028 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=674903 sysload=0.18 cputime=181.541 memavail=1630112 print_time=4686.052 buffer_time=2.997 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 4675.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2494978 bytes_read=1320736 bytes_retransmit=9 bytes_invalid=0 send_seq=71393 receive_seq=71393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=674935 sysload=0.16 cputime=181.594 memavail=1630044 print_time=4687.407 buffer_time=3.351 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 4676.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2495237 bytes_read=1321093 bytes_retransmit=9 bytes_invalid=0 send_seq=71407 receive_seq=71407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=674935 sysload=0.16 cputime=181.623 memavail=1629552 print_time=4687.407 buffer_time=2.350 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 4677.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2495913 bytes_read=1321525 bytes_retransmit=9 bytes_invalid=0 send_seq=71430 receive_seq=71430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=675028 sysload=0.16 cputime=181.680 memavail=1629552 print_time=4689.245 buffer_time=3.188 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 4678.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2496202 bytes_read=1321901 bytes_retransmit=9 bytes_invalid=0 send_seq=71445 receive_seq=71445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.106 rpi: temp=56.0 mcu_temp: temp=39.9 sd_pos=675028 sysload=0.16 cputime=181.734 memavail=1629544 print_time=4689.245 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 4679.2: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2496813 bytes_read=1322303 bytes_retransmit=9 bytes_invalid=0 send_seq=71468 receive_seq=71468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=675092 sysload=0.16 cputime=181.789 memavail=1629544 print_time=4690.793 buffer_time=2.735 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 4680.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2497329 bytes_read=1322725 bytes_retransmit=9 bytes_invalid=0 send_seq=71486 receive_seq=71486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=675154 sysload=0.15 cputime=181.848 memavail=1629548 print_time=4692.306 buffer_time=3.247 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 4681.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2497583 bytes_read=1323101 bytes_retransmit=9 bytes_invalid=0 send_seq=71501 receive_seq=71501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.060 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=675154 sysload=0.15 cputime=181.901 memavail=1629528 print_time=4692.306 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.2 pwm=0.266
Stats 4682.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2498177 bytes_read=1323493 bytes_retransmit=9 bytes_invalid=0 send_seq=71522 receive_seq=71522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.744 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=675218 sysload=0.15 cputime=181.957 memavail=1629800 print_time=4693.782 buffer_time=2.721 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 4683.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2498713 bytes_read=1323905 bytes_retransmit=9 bytes_invalid=0 send_seq=71541 receive_seq=71541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=675308 sysload=0.15 cputime=182.009 memavail=1630060 print_time=4695.238 buffer_time=3.177 print_stall=0 extruder: target=215 temp=214.9 pwm=0.553
Stats 4684.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2498994 bytes_read=1324286 bytes_retransmit=9 bytes_invalid=0 send_seq=71557 receive_seq=71557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.066 rpi: temp=54.5 mcu_temp: temp=40.8 sd_pos=675308 sysload=0.15 cputime=182.061 memavail=1629624 print_time=4695.238 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.2 pwm=0.356
Stats 4685.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2499566 bytes_read=1324698 bytes_retransmit=9 bytes_invalid=0 send_seq=71579 receive_seq=71579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.8 pwm=0.759 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=675370 sysload=0.14 cputime=182.118 memavail=1629648 print_time=4696.621 buffer_time=2.559 print_stall=0 extruder: target=215 temp=215.1 pwm=0.378
Stats 4686.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2500122 bytes_read=1325120 bytes_retransmit=9 bytes_invalid=0 send_seq=71600 receive_seq=71600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.411 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=675434 sysload=0.14 cputime=182.176 memavail=1629624 print_time=4697.971 buffer_time=2.907 print_stall=0 extruder: target=215 temp=215.4 pwm=0.239
Stats 4687.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2500641 bytes_read=1325511 bytes_retransmit=9 bytes_invalid=0 send_seq=71618 receive_seq=71618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.122 rpi: temp=56.0 mcu_temp: temp=40.0 sd_pos=675497 sysload=0.14 cputime=182.234 memavail=1629568 print_time=4699.269 buffer_time=3.205 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 4688.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2500931 bytes_read=1325878 bytes_retransmit=9 bytes_invalid=0 send_seq=71634 receive_seq=71634 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=675497 sysload=0.14 cputime=182.264 memavail=1629576 print_time=4699.269 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.4 pwm=0.260
Stats 4689.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2501512 bytes_read=1326300 bytes_retransmit=9 bytes_invalid=0 send_seq=71655 receive_seq=71655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=55.0 mcu_temp: temp=40.4 sd_pos=675560 sysload=0.14 cputime=182.323 memavail=1629308 print_time=4700.516 buffer_time=2.451 print_stall=0 extruder: target=215 temp=215.0 pwm=0.581
Stats 4690.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2502073 bytes_read=1326721 bytes_retransmit=9 bytes_invalid=0 send_seq=71676 receive_seq=71676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.142 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=675655 sysload=0.13 cputime=182.354 memavail=1629324 print_time=4701.735 buffer_time=2.669 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 4691.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2502583 bytes_read=1327103 bytes_retransmit=9 bytes_invalid=0 send_seq=71695 receive_seq=71695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.679 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=675719 sysload=0.13 cputime=182.411 memavail=1629316 print_time=4702.851 buffer_time=2.785 print_stall=0 extruder: target=215 temp=215.3 pwm=0.271
Stats 4692.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2503137 bytes_read=1327520 bytes_retransmit=9 bytes_invalid=0 send_seq=71715 receive_seq=71715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=675783 sysload=0.13 cputime=182.470 memavail=1629524 print_time=4703.922 buffer_time=2.855 print_stall=0 extruder: target=215 temp=215.2 pwm=0.410
Stats 4693.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2503913 bytes_read=1327936 bytes_retransmit=9 bytes_invalid=0 send_seq=71738 receive_seq=71738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=675847 sysload=0.13 cputime=182.531 memavail=1629288 print_time=4704.917 buffer_time=2.850 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 4694.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2504428 bytes_read=1328318 bytes_retransmit=9 bytes_invalid=0 send_seq=71757 receive_seq=71757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=675943 sysload=0.13 cputime=182.589 memavail=1629532 print_time=4705.867 buffer_time=2.799 print_stall=0 extruder: target=215 temp=215.0 pwm=0.544
Stats 4695.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=2504975 bytes_read=1328759 bytes_retransmit=9 bytes_invalid=0 send_seq=71776 receive_seq=71776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=676038 sysload=0.12 cputime=182.646 memavail=1629328 print_time=4706.709 buffer_time=2.641 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 4696.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=2505464 bytes_read=1329131 bytes_retransmit=9 bytes_invalid=0 send_seq=71793 receive_seq=71793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.392 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=676102 sysload=0.12 cputime=182.703 memavail=1629328 print_time=4707.406 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.1 pwm=0.411
Stats 4697.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=2506923 bytes_read=1329588 bytes_retransmit=9 bytes_invalid=0 send_seq=71827 receive_seq=71827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=676525 sysload=0.12 cputime=182.765 memavail=1629320 print_time=4708.958 buffer_time=2.890 print_stall=0 extruder: target=215 temp=215.2 pwm=0.343
Stats 4698.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=2507433 bytes_read=1330014 bytes_retransmit=9 bytes_invalid=0 send_seq=71846 receive_seq=71846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=11 freq=71996374 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=676889 sysload=0.12 cputime=182.805 memavail=1629328 print_time=4709.083 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 4699.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=2508996 bytes_read=1330471 bytes_retransmit=9 bytes_invalid=0 send_seq=71880 receive_seq=71880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.191 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=677461 sysload=0.12 cputime=182.870 memavail=1629320 print_time=4710.151 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 4700.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2509606 bytes_read=1330873 bytes_retransmit=9 bytes_invalid=0 send_seq=71900 receive_seq=71900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=677843 sysload=0.11 cputime=182.932 memavail=1629328 print_time=4711.197 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.9 pwm=0.615
Stats 4701.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2510289 bytes_read=1331294 bytes_retransmit=9 bytes_invalid=0 send_seq=71918 receive_seq=71918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=678094 sysload=0.11 cputime=182.995 memavail=1629068 print_time=4712.112 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 4702.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2510915 bytes_read=1331666 bytes_retransmit=9 bytes_invalid=0 send_seq=71935 receive_seq=71935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=678405 sysload=0.11 cputime=183.055 memavail=1629232 print_time=4713.081 buffer_time=2.010 print_stall=0 extruder: target=215 temp=214.9 pwm=0.552
Stats 4703.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2511588 bytes_read=1332047 bytes_retransmit=9 bytes_invalid=0 send_seq=71955 receive_seq=71955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=678740 sysload=0.11 cputime=183.093 memavail=1629076 print_time=4714.203 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 4704.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2512502 bytes_read=1332480 bytes_retransmit=9 bytes_invalid=0 send_seq=71978 receive_seq=71978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=679114 sysload=0.11 cputime=183.166 memavail=1629088 print_time=4715.313 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 4705.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2513081 bytes_read=1332857 bytes_retransmit=9 bytes_invalid=0 send_seq=71995 receive_seq=71995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=679461 sysload=0.10 cputime=183.230 memavail=1629020 print_time=4716.251 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.1 pwm=0.355
Stats 4706.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2513734 bytes_read=1333229 bytes_retransmit=9 bytes_invalid=0 send_seq=72014 receive_seq=72014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.9 sd_pos=679748 sysload=0.10 cputime=183.293 memavail=1629088 print_time=4717.112 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.9 pwm=0.576
Stats 4707.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2514423 bytes_read=1333654 bytes_retransmit=9 bytes_invalid=0 send_seq=72033 receive_seq=72033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.719 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=680057 sysload=0.10 cputime=183.358 memavail=1628860 print_time=4718.185 buffer_time=2.110 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 4708.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2515122 bytes_read=1334041 bytes_retransmit=9 bytes_invalid=0 send_seq=72053 receive_seq=72053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=56.5 mcu_temp: temp=40.6 sd_pos=680463 sysload=0.10 cputime=183.420 memavail=1629056 print_time=4719.245 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.2 pwm=0.397
Stats 4709.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2515883 bytes_read=1334433 bytes_retransmit=9 bytes_invalid=0 send_seq=72074 receive_seq=72074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=55.0 mcu_temp: temp=40.7 sd_pos=680648 sysload=0.10 cputime=183.479 memavail=1629304 print_time=4720.160 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.2 pwm=0.417
Stats 4710.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2516440 bytes_read=1334864 bytes_retransmit=9 bytes_invalid=0 send_seq=72091 receive_seq=72091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.779 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=680902 sysload=0.09 cputime=183.540 memavail=1629100 print_time=4721.153 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.0 pwm=0.543
Stats 4711.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2517090 bytes_read=1335241 bytes_retransmit=9 bytes_invalid=0 send_seq=72109 receive_seq=72109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=681179 sysload=0.09 cputime=183.603 memavail=1628796 print_time=4722.434 buffer_time=2.357 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 4712.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2517641 bytes_read=1335633 bytes_retransmit=9 bytes_invalid=0 send_seq=72127 receive_seq=72127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=8 freq=71996385 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=681399 sysload=0.09 cputime=183.663 memavail=1628768 print_time=4723.272 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 4713.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2518155 bytes_read=1336039 bytes_retransmit=9 bytes_invalid=0 send_seq=72145 receive_seq=72145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=681553 sysload=0.09 cputime=183.697 memavail=1629032 print_time=4724.082 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 4714.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2518725 bytes_read=1336416 bytes_retransmit=9 bytes_invalid=0 send_seq=72163 receive_seq=72163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.446 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=681766 sysload=0.09 cputime=183.756 memavail=1629364 print_time=4725.103 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.0 pwm=0.566
Stats 4715.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2519705 bytes_read=1336884 bytes_retransmit=9 bytes_invalid=0 send_seq=72191 receive_seq=72191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.486 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=682121 sysload=0.08 cputime=183.824 memavail=1629340 print_time=4726.203 buffer_time=2.123 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 4716.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2520871 bytes_read=1337340 bytes_retransmit=9 bytes_invalid=0 send_seq=72219 receive_seq=72219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=682407 sysload=0.08 cputime=183.889 memavail=1629356 print_time=4727.369 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.2 pwm=0.339
Stats 4717.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2521752 bytes_read=1337742 bytes_retransmit=9 bytes_invalid=0 send_seq=72242 receive_seq=72242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.462 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=682529 sysload=0.08 cputime=183.947 memavail=1629104 print_time=4728.403 buffer_time=2.321 print_stall=0 extruder: target=215 temp=215.2 pwm=0.353
Stats 4718.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2522792 bytes_read=1338179 bytes_retransmit=9 bytes_invalid=0 send_seq=72269 receive_seq=72269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=39.8 sd_pos=682682 sysload=0.08 cputime=184.008 memavail=1629368 print_time=4729.548 buffer_time=2.466 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 4719.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2523449 bytes_read=1338590 bytes_retransmit=9 bytes_invalid=0 send_seq=72288 receive_seq=72288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.498 rpi: temp=56.5 mcu_temp: temp=40.4 sd_pos=682777 sysload=0.08 cputime=184.066 memavail=1629112 print_time=4730.164 buffer_time=2.081 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 4720.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2524478 bytes_read=1339027 bytes_retransmit=9 bytes_invalid=0 send_seq=72315 receive_seq=72315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.2 pwm=0.004 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=682901 sysload=0.08 cputime=184.126 memavail=1629360 print_time=4731.410 buffer_time=2.327 print_stall=0 extruder: target=215 temp=214.8 pwm=0.584
Stats 4721.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2525546 bytes_read=1339474 bytes_retransmit=9 bytes_invalid=0 send_seq=72344 receive_seq=72344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.580 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=683089 sysload=0.08 cputime=184.187 memavail=1629352 print_time=4732.727 buffer_time=2.643 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 4722.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2526210 bytes_read=1339900 bytes_retransmit=9 bytes_invalid=0 send_seq=72366 receive_seq=72366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.122 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=683151 sysload=0.08 cputime=184.245 memavail=1629092 print_time=4733.376 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.8 pwm=0.545
Stats 4723.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2527282 bytes_read=1340332 bytes_retransmit=9 bytes_invalid=0 send_seq=72395 receive_seq=72395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.897 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=683340 sysload=0.08 cputime=184.306 memavail=1629296 print_time=4734.698 buffer_time=2.613 print_stall=0 extruder: target=215 temp=214.8 pwm=0.605
Stats 4724.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=2527965 bytes_read=1340734 bytes_retransmit=9 bytes_invalid=0 send_seq=72415 receive_seq=72415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=56.5 mcu_temp: temp=40.5 sd_pos=683404 sysload=0.08 cputime=184.364 memavail=1629040 print_time=4735.358 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.1 pwm=0.325
Stats 4725.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2528934 bytes_read=1341200 bytes_retransmit=9 bytes_invalid=0 send_seq=72442 receive_seq=72442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=683529 sysload=0.07 cputime=184.423 memavail=1629372 print_time=4736.655 buffer_time=2.569 print_stall=0 extruder: target=215 temp=214.7 pwm=0.584
Stats 4726.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2529669 bytes_read=1341592 bytes_retransmit=9 bytes_invalid=0 send_seq=72463 receive_seq=72463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=683591 sysload=0.07 cputime=184.479 memavail=1629372 print_time=4737.279 buffer_time=2.193 print_stall=0 extruder: target=215 temp=214.9 pwm=0.437
Stats 4727.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2530604 bytes_read=1342019 bytes_retransmit=9 bytes_invalid=0 send_seq=72488 receive_seq=72488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.357 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=683775 sysload=0.07 cputime=184.521 memavail=1629104 print_time=4738.480 buffer_time=2.392 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 4728.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2531532 bytes_read=1342455 bytes_retransmit=9 bytes_invalid=0 send_seq=72512 receive_seq=72512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=683901 sysload=0.07 cputime=184.582 memavail=1629044 print_time=4739.557 buffer_time=2.470 print_stall=0 extruder: target=215 temp=214.7 pwm=0.596
Stats 4729.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2532410 bytes_read=1342862 bytes_retransmit=9 bytes_invalid=0 send_seq=72536 receive_seq=72536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.515 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=684118 sysload=0.07 cputime=184.644 memavail=1629060 print_time=4740.496 buffer_time=2.408 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 4730.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2533274 bytes_read=1343289 bytes_retransmit=9 bytes_invalid=0 send_seq=72558 receive_seq=72558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.225 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=684272 sysload=0.06 cputime=184.706 memavail=1628984 print_time=4741.263 buffer_time=2.175 print_stall=0 extruder: target=215 temp=214.8 pwm=0.532
Stats 4731.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2534242 bytes_read=1343735 bytes_retransmit=9 bytes_invalid=0 send_seq=72584 receive_seq=72584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.478 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=684435 sysload=0.06 cputime=184.768 memavail=1629236 print_time=4742.364 buffer_time=2.275 print_stall=0 extruder: target=215 temp=214.7 pwm=0.554
Stats 4732.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2534849 bytes_read=1344132 bytes_retransmit=9 bytes_invalid=0 send_seq=72606 receive_seq=72606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=684496 sysload=0.06 cputime=184.827 memavail=1628756 print_time=4743.099 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.8 pwm=0.486
Stats 4733.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2535655 bytes_read=1344544 bytes_retransmit=9 bytes_invalid=0 send_seq=72628 receive_seq=72628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=684746 sysload=0.06 cputime=184.869 memavail=1628808 print_time=4744.536 buffer_time=2.447 print_stall=0 extruder: target=215 temp=215.2 pwm=0.207
Stats 4734.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=2536283 bytes_read=1344965 bytes_retransmit=9 bytes_invalid=0 send_seq=72649 receive_seq=72649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.212 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=684809 sysload=0.06 cputime=184.927 memavail=1628848 print_time=4745.172 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 4735.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2537062 bytes_read=1345372 bytes_retransmit=9 bytes_invalid=0 send_seq=72670 receive_seq=72670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.122 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=684937 sysload=0.06 cputime=184.985 memavail=1628728 print_time=4746.455 buffer_time=2.365 print_stall=0 extruder: target=215 temp=214.8 pwm=0.480
Stats 4736.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2537907 bytes_read=1345794 bytes_retransmit=9 bytes_invalid=0 send_seq=72694 receive_seq=72694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.590 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=685065 sysload=0.06 cputime=185.043 memavail=1628980 print_time=4747.659 buffer_time=2.568 print_stall=0 extruder: target=215 temp=214.8 pwm=0.531
Stats 4737.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2538566 bytes_read=1346215 bytes_retransmit=9 bytes_invalid=0 send_seq=72715 receive_seq=72715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=55.5 mcu_temp: temp=40.5 sd_pos=685160 sysload=0.06 cputime=185.100 memavail=1629100 print_time=4748.264 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.8 pwm=0.495
Stats 4738.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2539454 bytes_read=1346632 bytes_retransmit=9 bytes_invalid=0 send_seq=72741 receive_seq=72741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.575 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=685317 sysload=0.06 cputime=185.162 memavail=1629324 print_time=4749.387 buffer_time=2.296 print_stall=0 extruder: target=215 temp=214.7 pwm=0.622
Stats 4739.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2540401 bytes_read=1347064 bytes_retransmit=9 bytes_invalid=0 send_seq=72767 receive_seq=72767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=685444 sysload=0.06 cputime=185.222 memavail=1629552 print_time=4750.505 buffer_time=2.413 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 4740.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2541309 bytes_read=1347510 bytes_retransmit=9 bytes_invalid=0 send_seq=72790 receive_seq=72790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=685570 sysload=0.05 cputime=185.281 memavail=1629636 print_time=4751.609 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.1 pwm=0.391
Stats 4741.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2541951 bytes_read=1347897 bytes_retransmit=9 bytes_invalid=0 send_seq=72810 receive_seq=72810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.2 pwm=0.032 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=685634 sysload=0.05 cputime=185.340 memavail=1629644 print_time=4752.163 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 4742.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2542913 bytes_read=1348329 bytes_retransmit=9 bytes_invalid=0 send_seq=72836 receive_seq=72836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.608 rpi: temp=54.5 mcu_temp: temp=39.9 sd_pos=685822 sysload=0.05 cputime=185.400 memavail=1629380 print_time=4753.290 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 4743.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2543855 bytes_read=1348780 bytes_retransmit=9 bytes_invalid=0 send_seq=72863 receive_seq=72863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.156 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=685950 sysload=0.05 cputime=185.434 memavail=1629020 print_time=4754.404 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.0 pwm=0.524
Stats 4744.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=2544796 bytes_read=1349192 bytes_retransmit=9 bytes_invalid=0 send_seq=72888 receive_seq=72888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=686140 sysload=0.05 cputime=185.496 memavail=1629280 print_time=4755.552 buffer_time=2.457 print_stall=0 extruder: target=215 temp=215.3 pwm=0.329
Stats 4745.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2545435 bytes_read=1349609 bytes_retransmit=9 bytes_invalid=0 send_seq=72908 receive_seq=72908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.442 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=686203 sysload=0.05 cputime=185.554 memavail=1629304 print_time=4756.123 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.1 pwm=0.517
Stats 4746.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2546341 bytes_read=1350040 bytes_retransmit=9 bytes_invalid=0 send_seq=72931 receive_seq=72931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.122 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=686393 sysload=0.05 cputime=185.611 memavail=1629548 print_time=4757.326 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 4747.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2547204 bytes_read=1350442 bytes_retransmit=9 bytes_invalid=0 send_seq=72954 receive_seq=72954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=686614 sysload=0.05 cputime=185.669 memavail=1629564 print_time=4758.593 buffer_time=2.498 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 4748.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2547778 bytes_read=1350839 bytes_retransmit=9 bytes_invalid=0 send_seq=72973 receive_seq=72973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.171 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=686678 sysload=0.05 cputime=185.725 memavail=1629784 print_time=4759.252 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 4749.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2548615 bytes_read=1351275 bytes_retransmit=9 bytes_invalid=0 send_seq=72997 receive_seq=72997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.777 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=686868 sysload=0.05 cputime=185.784 memavail=1630304 print_time=4760.773 buffer_time=2.676 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 4750.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2549426 bytes_read=1351682 bytes_retransmit=9 bytes_invalid=0 send_seq=73018 receive_seq=73018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.233 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=686930 sysload=0.04 cputime=185.841 memavail=1630056 print_time=4761.633 buffer_time=2.537 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 4751.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2550024 bytes_read=1352084 bytes_retransmit=9 bytes_invalid=0 send_seq=73038 receive_seq=73038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=687024 sysload=0.04 cputime=185.897 memavail=1630072 print_time=4762.521 buffer_time=2.423 print_stall=0 extruder: target=215 temp=215.2 pwm=0.407
Stats 4752.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2550570 bytes_read=1352490 bytes_retransmit=9 bytes_invalid=0 send_seq=73056 receive_seq=73056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=40.1 sd_pos=687088 sysload=0.04 cputime=185.949 memavail=1630056 print_time=4763.442 buffer_time=2.344 print_stall=0 extruder: target=215 temp=215.0 pwm=0.609
Stats 4753.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2551068 bytes_read=1352857 bytes_retransmit=9 bytes_invalid=0 send_seq=73072 receive_seq=73072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=687152 sysload=0.04 cputime=185.984 memavail=1629520 print_time=4764.474 buffer_time=2.375 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 4754.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2551620 bytes_read=1353254 bytes_retransmit=9 bytes_invalid=0 send_seq=73091 receive_seq=73091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.001 rpi: temp=55.0 mcu_temp: temp=40.1 sd_pos=687247 sysload=0.04 cputime=186.038 memavail=1628988 print_time=4765.595 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.2 pwm=0.385
Stats 4755.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=2552158 bytes_read=1353675 bytes_retransmit=9 bytes_invalid=0 send_seq=73109 receive_seq=73109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=687311 sysload=0.04 cputime=186.093 memavail=1629240 print_time=4766.793 buffer_time=2.693 print_stall=0 extruder: target=215 temp=215.2 pwm=0.377
Stats 4756.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=2552657 bytes_read=1354052 bytes_retransmit=9 bytes_invalid=0 send_seq=73127 receive_seq=73127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=687375 sysload=0.04 cputime=186.151 memavail=1629124 print_time=4768.045 buffer_time=2.944 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 4757.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=2553166 bytes_read=1354444 bytes_retransmit=9 bytes_invalid=0 send_seq=73145 receive_seq=73145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.8 pwm=0.908 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=687439 sysload=0.04 cputime=186.207 memavail=1629132 print_time=4769.359 buffer_time=3.257 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 4758.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=2553444 bytes_read=1354825 bytes_retransmit=9 bytes_invalid=0 send_seq=73158 receive_seq=73158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=687439 sysload=0.04 cputime=186.257 memavail=1629124 print_time=4769.359 buffer_time=2.257 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 4759.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000042 bytes_write=2553998 bytes_read=1355202 bytes_retransmit=9 bytes_invalid=0 send_seq=73176 receive_seq=73176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.303 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=687503 sysload=0.04 cputime=186.313 memavail=1628884 print_time=4770.733 buffer_time=2.631 print_stall=0 extruder: target=215 temp=215.2 pwm=0.345
Stats 4760.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2554578 bytes_read=1355619 bytes_retransmit=9 bytes_invalid=0 send_seq=73196 receive_seq=73196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=687567 sysload=0.04 cputime=186.369 memavail=1628884 print_time=4772.169 buffer_time=3.066 print_stall=0 extruder: target=215 temp=214.9 pwm=0.597
Stats 4761.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2554812 bytes_read=1356005 bytes_retransmit=9 bytes_invalid=0 send_seq=73210 receive_seq=73210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=687567 sysload=0.04 cputime=186.420 memavail=1628824 print_time=4772.169 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 4762.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2555386 bytes_read=1356386 bytes_retransmit=9 bytes_invalid=0 send_seq=73229 receive_seq=73229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.274 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=687629 sysload=0.04 cputime=186.473 memavail=1628512 print_time=4773.642 buffer_time=2.538 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 4763.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2555934 bytes_read=1356767 bytes_retransmit=9 bytes_invalid=0 send_seq=73247 receive_seq=73247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.3 sd_pos=687691 sysload=0.04 cputime=186.509 memavail=1628536 print_time=4775.159 buffer_time=3.055 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 4764.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2556152 bytes_read=1357136 bytes_retransmit=9 bytes_invalid=0 send_seq=73260 receive_seq=73260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=687691 sysload=0.04 cputime=186.560 memavail=1628708 print_time=4775.159 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 4765.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2556799 bytes_read=1357533 bytes_retransmit=9 bytes_invalid=0 send_seq=73281 receive_seq=73281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=687751 sysload=0.11 cputime=186.615 memavail=1628660 print_time=4776.718 buffer_time=2.613 print_stall=0 extruder: target=215 temp=215.3 pwm=0.261
Stats 4766.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2557351 bytes_read=1357913 bytes_retransmit=9 bytes_invalid=0 send_seq=73298 receive_seq=73298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.262 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=687815 sysload=0.11 cputime=186.665 memavail=1628672 print_time=4778.321 buffer_time=3.214 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 4767.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2557602 bytes_read=1358304 bytes_retransmit=9 bytes_invalid=0 send_seq=73313 receive_seq=73313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.210 rpi: temp=56.0 mcu_temp: temp=40.5 sd_pos=687815 sysload=0.11 cputime=186.715 memavail=1628164 print_time=4778.321 buffer_time=2.214 print_stall=0 extruder: target=215 temp=214.8 pwm=0.564
Stats 4768.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2558230 bytes_read=1358691 bytes_retransmit=9 bytes_invalid=0 send_seq=73333 receive_seq=73333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.242 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=687907 sysload=0.11 cputime=186.769 memavail=1628412 print_time=4779.972 buffer_time=2.864 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 4769.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2558736 bytes_read=1359098 bytes_retransmit=9 bytes_invalid=0 send_seq=73351 receive_seq=73351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=56.0 mcu_temp: temp=39.7 sd_pos=687968 sysload=0.11 cputime=186.825 memavail=1628352 print_time=4781.641 buffer_time=3.533 print_stall=0 extruder: target=215 temp=214.8 pwm=0.468
Stats 4770.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2559081 bytes_read=1359494 bytes_retransmit=9 bytes_invalid=0 send_seq=73367 receive_seq=73367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=687968 sysload=0.11 cputime=186.876 memavail=1628612 print_time=4781.641 buffer_time=2.532 print_stall=0 extruder: target=215 temp=214.8 pwm=0.504
Stats 4771.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2559716 bytes_read=1359881 bytes_retransmit=9 bytes_invalid=0 send_seq=73387 receive_seq=73387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=55.0 mcu_temp: temp=39.9 sd_pos=688026 sysload=0.11 cputime=186.931 memavail=1628612 print_time=4783.344 buffer_time=3.235 print_stall=0 extruder: target=215 temp=215.0 pwm=0.444
Stats 4772.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2559910 bytes_read=1360253 bytes_retransmit=9 bytes_invalid=0 send_seq=73398 receive_seq=73398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.222 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=688026 sysload=0.11 cputime=186.981 memavail=1628144 print_time=4783.344 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 4773.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2560568 bytes_read=1360654 bytes_retransmit=9 bytes_invalid=0 send_seq=73418 receive_seq=73418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=688087 sysload=0.11 cputime=187.014 memavail=1628592 print_time=4785.077 buffer_time=2.966 print_stall=0 extruder: target=215 temp=215.1 pwm=0.338
Stats 4774.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2561117 bytes_read=1361041 bytes_retransmit=9 bytes_invalid=0 send_seq=73438 receive_seq=73438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=688147 sysload=0.11 cputime=187.067 memavail=1628864 print_time=4786.839 buffer_time=3.728 print_stall=0 extruder: target=215 temp=214.8 pwm=0.611
Stats 4775.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2561404 bytes_read=1361428 bytes_retransmit=9 bytes_invalid=0 send_seq=73449 receive_seq=73449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=688147 sysload=0.10 cputime=187.117 memavail=1628436 print_time=4786.839 buffer_time=2.727 print_stall=0 extruder: target=215 temp=214.8 pwm=0.544
Stats 4776.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2561984 bytes_read=1361824 bytes_retransmit=9 bytes_invalid=0 send_seq=73468 receive_seq=73468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.255 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=688243 sysload=0.10 cputime=187.155 memavail=1628408 print_time=4788.632 buffer_time=3.518 print_stall=0 extruder: target=215 temp=215.0 pwm=0.380
Stats 4777.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2562254 bytes_read=1362197 bytes_retransmit=9 bytes_invalid=0 send_seq=73483 receive_seq=73483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.228 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=688243 sysload=0.10 cputime=187.203 memavail=1628672 print_time=4788.632 buffer_time=2.517 print_stall=0 extruder: target=215 temp=214.8 pwm=0.524
Stats 4778.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2562895 bytes_read=1362614 bytes_retransmit=9 bytes_invalid=0 send_seq=73503 receive_seq=73503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.219 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=688305 sysload=0.10 cputime=187.239 memavail=1628672 print_time=4790.451 buffer_time=3.337 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 4779.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2563097 bytes_read=1362975 bytes_retransmit=9 bytes_invalid=0 send_seq=73515 receive_seq=73515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=40.9 sd_pos=688305 sysload=0.10 cputime=187.291 memavail=1628688 print_time=4790.451 buffer_time=2.336 print_stall=0 extruder: target=215 temp=215.0 pwm=0.409
Stats 4780.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2563771 bytes_read=1363387 bytes_retransmit=9 bytes_invalid=0 send_seq=73537 receive_seq=73537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.013 rpi: temp=54.5 mcu_temp: temp=40.9 sd_pos=688433 sysload=0.09 cputime=187.329 memavail=1628940 print_time=4791.281 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 4781.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2564577 bytes_read=1363819 bytes_retransmit=9 bytes_invalid=0 send_seq=73560 receive_seq=73560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=688558 sysload=0.09 cputime=187.386 memavail=1629192 print_time=4792.698 buffer_time=2.582 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 4782.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2565155 bytes_read=1364220 bytes_retransmit=9 bytes_invalid=0 send_seq=73580 receive_seq=73580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=688620 sysload=0.09 cputime=187.443 memavail=1628928 print_time=4793.392 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 4783.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2565993 bytes_read=1364622 bytes_retransmit=9 bytes_invalid=0 send_seq=73603 receive_seq=73603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=688774 sysload=0.09 cputime=187.483 memavail=1629160 print_time=4794.721 buffer_time=2.604 print_stall=0 extruder: target=215 temp=215.2 pwm=0.300
Stats 4784.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=2566645 bytes_read=1365039 bytes_retransmit=9 bytes_invalid=0 send_seq=73623 receive_seq=73623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.575 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=688834 sysload=0.09 cputime=187.539 memavail=1629192 print_time=4795.358 buffer_time=2.241 print_stall=0 extruder: target=215 temp=214.9 pwm=0.576
Stats 4785.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2567497 bytes_read=1365465 bytes_retransmit=9 bytes_invalid=0 send_seq=73645 receive_seq=73645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.534 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=688988 sysload=0.08 cputime=187.597 memavail=1629176 print_time=4796.613 buffer_time=2.496 print_stall=0 extruder: target=215 temp=215.0 pwm=0.522
Stats 4786.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2568114 bytes_read=1365852 bytes_retransmit=9 bytes_invalid=0 send_seq=73665 receive_seq=73665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=56.0 mcu_temp: temp=40.2 sd_pos=689050 sysload=0.08 cputime=187.651 memavail=1628760 print_time=4797.221 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 4787.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2568961 bytes_read=1366279 bytes_retransmit=9 bytes_invalid=0 send_seq=73687 receive_seq=73687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=689204 sysload=0.08 cputime=187.704 memavail=1629044 print_time=4798.439 buffer_time=2.320 print_stall=0 extruder: target=215 temp=214.9 pwm=0.568
Stats 4788.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2569934 bytes_read=1366715 bytes_retransmit=9 bytes_invalid=0 send_seq=73714 receive_seq=73714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.474 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=689357 sysload=0.08 cputime=187.743 memavail=1629124 print_time=4799.638 buffer_time=2.518 print_stall=0 extruder: target=215 temp=215.0 pwm=0.411
Stats 4789.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2570592 bytes_read=1367102 bytes_retransmit=9 bytes_invalid=0 send_seq=73734 receive_seq=73734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.297 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=689450 sysload=0.08 cputime=187.797 memavail=1628856 print_time=4800.234 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 4790.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2571466 bytes_read=1367544 bytes_retransmit=9 bytes_invalid=0 send_seq=73756 receive_seq=73756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.797 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=689570 sysload=0.07 cputime=187.834 memavail=1628872 print_time=4801.428 buffer_time=2.305 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 4791.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2572458 bytes_read=1367980 bytes_retransmit=9 bytes_invalid=0 send_seq=73783 receive_seq=73783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=689693 sysload=0.07 cputime=187.892 memavail=1628628 print_time=4802.624 buffer_time=2.501 print_stall=0 extruder: target=215 temp=215.2 pwm=0.307
Stats 4792.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2572987 bytes_read=1368347 bytes_retransmit=9 bytes_invalid=0 send_seq=73799 receive_seq=73799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=689754 sysload=0.07 cputime=187.945 memavail=1628616 print_time=4803.232 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 4793.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2573851 bytes_read=1368779 bytes_retransmit=9 bytes_invalid=0 send_seq=73822 receive_seq=73822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=689878 sysload=0.07 cputime=187.980 memavail=1629388 print_time=4804.455 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 4794.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2574820 bytes_read=1369215 bytes_retransmit=9 bytes_invalid=0 send_seq=73849 receive_seq=73849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=690031 sysload=0.07 cputime=188.039 memavail=1629652 print_time=4805.705 buffer_time=2.580 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 4795.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2575421 bytes_read=1369607 bytes_retransmit=9 bytes_invalid=0 send_seq=73867 receive_seq=73867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=690123 sysload=0.07 cputime=188.093 memavail=1629896 print_time=4806.355 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.8 pwm=0.585
Stats 4796.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2576313 bytes_read=1370049 bytes_retransmit=9 bytes_invalid=0 send_seq=73892 receive_seq=73892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=690277 sysload=0.07 cputime=188.155 memavail=1629600 print_time=4807.696 buffer_time=2.570 print_stall=0 extruder: target=215 temp=215.1 pwm=0.403
Stats 4797.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2576950 bytes_read=1370450 bytes_retransmit=9 bytes_invalid=0 send_seq=73912 receive_seq=73912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=690339 sysload=0.07 cputime=188.211 memavail=1630084 print_time=4808.365 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 4798.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2577808 bytes_read=1370867 bytes_retransmit=9 bytes_invalid=0 send_seq=73938 receive_seq=73938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.424 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=690491 sysload=0.07 cputime=188.270 memavail=1629844 print_time=4809.819 buffer_time=2.691 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 4799.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=2578426 bytes_read=1371279 bytes_retransmit=9 bytes_invalid=0 send_seq=73957 receive_seq=73957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=690556 sysload=0.07 cputime=188.305 memavail=1629800 print_time=4810.630 buffer_time=2.502 print_stall=0 extruder: target=215 temp=214.9 pwm=0.438
Stats 4800.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2579265 bytes_read=1371720 bytes_retransmit=9 bytes_invalid=0 send_seq=73982 receive_seq=73982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=690618 sysload=0.06 cputime=188.363 memavail=1629528 print_time=4811.467 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.1 pwm=0.387
Stats 4801.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2579803 bytes_read=1372107 bytes_retransmit=9 bytes_invalid=0 send_seq=74002 receive_seq=74002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=690711 sysload=0.06 cputime=188.420 memavail=1629532 print_time=4812.353 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.1 pwm=0.397
Stats 4802.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2580356 bytes_read=1372524 bytes_retransmit=9 bytes_invalid=0 send_seq=74022 receive_seq=74022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=690772 sysload=0.06 cputime=188.476 memavail=1629296 print_time=4813.271 buffer_time=2.141 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 4803.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2580910 bytes_read=1372920 bytes_retransmit=9 bytes_invalid=0 send_seq=74041 receive_seq=74041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=690834 sysload=0.06 cputime=188.508 memavail=1630028 print_time=4814.300 buffer_time=2.169 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 4804.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2581437 bytes_read=1373292 bytes_retransmit=9 bytes_invalid=0 send_seq=74058 receive_seq=74058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=690925 sysload=0.06 cputime=188.561 memavail=1630028 print_time=4815.418 buffer_time=2.287 print_stall=0 extruder: target=215 temp=214.7 pwm=0.629
Stats 4805.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2582035 bytes_read=1373734 bytes_retransmit=9 bytes_invalid=0 send_seq=74080 receive_seq=74080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=690986 sysload=0.14 cputime=188.617 memavail=1629776 print_time=4816.616 buffer_time=2.483 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 4806.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2582611 bytes_read=1374135 bytes_retransmit=9 bytes_invalid=0 send_seq=74100 receive_seq=74100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=691048 sysload=0.14 cputime=188.671 memavail=1630048 print_time=4817.866 buffer_time=2.733 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 4807.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2583117 bytes_read=1374517 bytes_retransmit=9 bytes_invalid=0 send_seq=74119 receive_seq=74119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=691110 sysload=0.14 cputime=188.727 memavail=1629764 print_time=4819.178 buffer_time=3.043 print_stall=0 extruder: target=215 temp=215.0 pwm=0.532
Stats 4808.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2583393 bytes_read=1374914 bytes_retransmit=9 bytes_invalid=0 send_seq=74135 receive_seq=74135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=691110 sysload=0.14 cputime=188.778 memavail=1629540 print_time=4819.178 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 4809.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2583968 bytes_read=1375315 bytes_retransmit=9 bytes_invalid=0 send_seq=74155 receive_seq=74155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=691171 sysload=0.14 cputime=188.831 memavail=1629280 print_time=4820.551 buffer_time=2.415 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 4810.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2584536 bytes_read=1375712 bytes_retransmit=9 bytes_invalid=0 send_seq=74174 receive_seq=74174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=55.0 pwm=0.513 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=691258 sysload=0.21 cputime=188.887 memavail=1628792 print_time=4821.990 buffer_time=2.854 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 4811.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2585112 bytes_read=1376129 bytes_retransmit=9 bytes_invalid=0 send_seq=74194 receive_seq=74194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=54.9 pwm=0.470 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=691321 sysload=0.21 cputime=188.942 memavail=1628972 print_time=4823.461 buffer_time=3.324 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 4812.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2585389 bytes_read=1376510 bytes_retransmit=9 bytes_invalid=0 send_seq=74210 receive_seq=74210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.046 rpi: temp=55.5 mcu_temp: temp=40.1 sd_pos=691321 sysload=0.21 cputime=188.994 memavail=1628452 print_time=4823.461 buffer_time=2.323 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 4813.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2585932 bytes_read=1376887 bytes_retransmit=9 bytes_invalid=0 send_seq=74228 receive_seq=74228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=691383 sysload=0.21 cputime=189.028 memavail=1628412 print_time=4824.976 buffer_time=2.837 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 4814.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2586466 bytes_read=1377304 bytes_retransmit=9 bytes_invalid=0 send_seq=74248 receive_seq=74248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996395 heater_bed: target=55 temp=55.0 pwm=0.050 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=691446 sysload=0.21 cputime=189.083 memavail=1628668 print_time=4826.534 buffer_time=3.395 print_stall=0 extruder: target=215 temp=215.2 pwm=0.456
Stats 4815.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2586763 bytes_read=1377690 bytes_retransmit=9 bytes_invalid=0 send_seq=74262 receive_seq=74262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=55 temp=54.9 pwm=0.491 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=691446 sysload=0.19 cputime=189.133 memavail=1628904 print_time=4826.534 buffer_time=2.394 print_stall=0 extruder: target=215 temp=215.3 pwm=0.349
Stats 4816.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2587345 bytes_read=1378072 bytes_retransmit=9 bytes_invalid=0 send_seq=74281 receive_seq=74281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=691506 sysload=0.19 cputime=189.185 memavail=1629180 print_time=4828.136 buffer_time=2.995 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 4817.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2587879 bytes_read=1378484 bytes_retransmit=9 bytes_invalid=0 send_seq=74300 receive_seq=74300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.5 mcu_temp: temp=40.7 sd_pos=691601 sysload=0.19 cputime=189.241 memavail=1629172 print_time=4829.786 buffer_time=3.645 print_stall=0 extruder: target=215 temp=215.3 pwm=0.269
Stats 4818.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2588210 bytes_read=1378860 bytes_retransmit=9 bytes_invalid=0 send_seq=74315 receive_seq=74315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=691601 sysload=0.19 cputime=189.292 memavail=1629372 print_time=4829.786 buffer_time=2.645 print_stall=0 extruder: target=215 temp=215.3 pwm=0.335
Stats 4819.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2588803 bytes_read=1379242 bytes_retransmit=9 bytes_invalid=0 send_seq=74334 receive_seq=74334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=691662 sysload=0.19 cputime=189.346 memavail=1629356 print_time=4831.453 buffer_time=3.312 print_stall=0 extruder: target=215 temp=215.3 pwm=0.346
Stats 4820.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2589039 bytes_read=1379649 bytes_retransmit=9 bytes_invalid=0 send_seq=74349 receive_seq=74349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=691662 sysload=0.17 cputime=189.400 memavail=1629376 print_time=4831.453 buffer_time=2.311 print_stall=0 extruder: target=215 temp=215.3 pwm=0.336
Stats 4821.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2589690 bytes_read=1380055 bytes_retransmit=9 bytes_invalid=0 send_seq=74370 receive_seq=74370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.108 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=691726 sysload=0.17 cputime=189.457 memavail=1628872 print_time=4833.156 buffer_time=3.013 print_stall=0 extruder: target=215 temp=215.1 pwm=0.508
Stats 4822.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2589913 bytes_read=1380408 bytes_retransmit=9 bytes_invalid=0 send_seq=74384 receive_seq=74384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=691726 sysload=0.17 cputime=189.511 memavail=1628384 print_time=4833.156 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.0 pwm=0.586
Stats 4823.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2590568 bytes_read=1380822 bytes_retransmit=9 bytes_invalid=0 send_seq=74406 receive_seq=74406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=54.5 mcu_temp: temp=41.1 sd_pos=691788 sysload=0.17 cputime=189.569 memavail=1628316 print_time=4834.888 buffer_time=2.743 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 4824.3: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2591163 bytes_read=1381217 bytes_retransmit=9 bytes_invalid=0 send_seq=74427 receive_seq=74427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=691852 sysload=0.17 cputime=189.624 memavail=1628560 print_time=4836.649 buffer_time=3.504 print_stall=0 extruder: target=215 temp=215.2 pwm=0.425
Stats 4825.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2591426 bytes_read=1381579 bytes_retransmit=9 bytes_invalid=0 send_seq=74441 receive_seq=74441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.2 pwm=0.038 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=691852 sysload=0.16 cputime=189.676 memavail=1628880 print_time=4836.649 buffer_time=2.504 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 4826.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2592062 bytes_read=1382002 bytes_retransmit=9 bytes_invalid=0 send_seq=74463 receive_seq=74463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=691945 sysload=0.16 cputime=189.733 memavail=1629148 print_time=4838.441 buffer_time=3.295 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 4827.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2592290 bytes_read=1382378 bytes_retransmit=9 bytes_invalid=0 send_seq=74478 receive_seq=74478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=691945 sysload=0.16 cputime=189.784 memavail=1629632 print_time=4838.441 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.2 pwm=0.291
Stats 4828.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2592932 bytes_read=1382765 bytes_retransmit=9 bytes_invalid=0 send_seq=74498 receive_seq=74498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.236 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=692010 sysload=0.16 cputime=189.840 memavail=1629404 print_time=4840.275 buffer_time=3.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.587
Stats 4829.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2593184 bytes_read=1383157 bytes_retransmit=9 bytes_invalid=0 send_seq=74513 receive_seq=74513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.878 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=692010 sysload=0.16 cputime=189.893 memavail=1629152 print_time=4840.275 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 4830.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2594642 bytes_read=1383648 bytes_retransmit=9 bytes_invalid=0 send_seq=74548 receive_seq=74548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=692141 sysload=0.15 cputime=189.953 memavail=1628664 print_time=4841.912 buffer_time=2.764 print_stall=0 extruder: target=215 temp=215.0 pwm=0.545
Stats 4831.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2595619 bytes_read=1384055 bytes_retransmit=9 bytes_invalid=0 send_seq=74572 receive_seq=74572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.702 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=692555 sysload=0.15 cputime=190.014 memavail=1628656 print_time=4842.502 buffer_time=2.353 print_stall=0 extruder: target=215 temp=215.1 pwm=0.499
Stats 4832.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2597228 bytes_read=1384547 bytes_retransmit=9 bytes_invalid=0 send_seq=74607 receive_seq=74607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=57.0 mcu_temp: temp=40.7 sd_pos=693592 sysload=0.15 cputime=190.083 memavail=1628160 print_time=4843.232 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 4833.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2597866 bytes_read=1384948 bytes_retransmit=9 bytes_invalid=0 send_seq=74627 receive_seq=74627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=693927 sysload=0.15 cputime=190.145 memavail=1628472 print_time=4844.299 buffer_time=2.148 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 4834.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2598454 bytes_read=1385320 bytes_retransmit=9 bytes_invalid=0 send_seq=74644 receive_seq=74644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.2 pwm=0.022 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=694177 sysload=0.15 cputime=190.201 memavail=1628712 print_time=4845.190 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 4835.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2599146 bytes_read=1385742 bytes_retransmit=9 bytes_invalid=0 send_seq=74662 receive_seq=74662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.420 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=694584 sysload=0.14 cputime=190.267 memavail=1628732 print_time=4846.388 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 4836.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2599841 bytes_read=1386148 bytes_retransmit=9 bytes_invalid=0 send_seq=74683 receive_seq=74683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=56.0 mcu_temp: temp=40.7 sd_pos=694927 sysload=0.14 cputime=190.330 memavail=1628880 print_time=4847.540 buffer_time=2.387 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 4837.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2600636 bytes_read=1386540 bytes_retransmit=9 bytes_invalid=0 send_seq=74704 receive_seq=74704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=695202 sysload=0.14 cputime=190.391 memavail=1629240 print_time=4848.241 buffer_time=2.087 print_stall=0 extruder: target=215 temp=215.0 pwm=0.533
Stats 4838.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2601409 bytes_read=1386972 bytes_retransmit=9 bytes_invalid=0 send_seq=74727 receive_seq=74727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=55.0 mcu_temp: temp=40.6 sd_pos=695542 sysload=0.14 cputime=190.453 memavail=1629584 print_time=4849.313 buffer_time=2.157 print_stall=0 extruder: target=215 temp=215.2 pwm=0.425
Stats 4839.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=2602005 bytes_read=1387384 bytes_retransmit=9 bytes_invalid=0 send_seq=74747 receive_seq=74747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=695825 sysload=0.14 cputime=190.514 memavail=1629348 print_time=4850.250 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 4840.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2602668 bytes_read=1387781 bytes_retransmit=9 bytes_invalid=0 send_seq=74766 receive_seq=74766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.186 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=696138 sysload=0.12 cputime=190.576 memavail=1629660 print_time=4851.212 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.0 pwm=0.553
Stats 4841.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2603365 bytes_read=1388198 bytes_retransmit=9 bytes_invalid=0 send_seq=74786 receive_seq=74786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=696481 sysload=0.12 cputime=190.637 memavail=1629676 print_time=4852.393 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.9 pwm=0.602
Stats 4842.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2604189 bytes_read=1388609 bytes_retransmit=9 bytes_invalid=0 send_seq=74808 receive_seq=74808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=696792 sysload=0.12 cputime=190.699 memavail=1629416 print_time=4853.228 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 4843.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2604829 bytes_read=1388991 bytes_retransmit=9 bytes_invalid=0 send_seq=74827 receive_seq=74827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=697066 sysload=0.12 cputime=190.740 memavail=1629800 print_time=4854.360 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 4844.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2605441 bytes_read=1389408 bytes_retransmit=9 bytes_invalid=0 send_seq=74847 receive_seq=74847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.016 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=697314 sysload=0.12 cputime=190.800 memavail=1630024 print_time=4855.606 buffer_time=2.446 print_stall=0 extruder: target=215 temp=215.1 pwm=0.367
Stats 4845.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2605914 bytes_read=1389809 bytes_retransmit=9 bytes_invalid=0 send_seq=74864 receive_seq=74864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=54.9 pwm=0.288 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=697504 sysload=0.11 cputime=190.863 memavail=1629856 print_time=4856.189 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 4846.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2606540 bytes_read=1390191 bytes_retransmit=9 bytes_invalid=0 send_seq=74883 receive_seq=74883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=697722 sysload=0.11 cputime=190.923 memavail=1629840 print_time=4857.287 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 4847.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2607156 bytes_read=1390608 bytes_retransmit=9 bytes_invalid=0 send_seq=74903 receive_seq=74903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=697970 sysload=0.11 cputime=190.981 memavail=1630108 print_time=4858.350 buffer_time=2.188 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 4848.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2607696 bytes_read=1390994 bytes_retransmit=9 bytes_invalid=0 send_seq=74920 receive_seq=74920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=698197 sysload=0.11 cputime=191.038 memavail=1629608 print_time=4859.299 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.1 pwm=0.363
Stats 4849.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2608918 bytes_read=1391421 bytes_retransmit=9 bytes_invalid=0 send_seq=74948 receive_seq=74948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=698443 sysload=0.11 cputime=191.097 memavail=1629624 print_time=4860.557 buffer_time=2.394 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 4850.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2609548 bytes_read=1391853 bytes_retransmit=9 bytes_invalid=0 send_seq=74968 receive_seq=74968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.377 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=698536 sysload=0.10 cputime=191.157 memavail=1629852 print_time=4861.232 buffer_time=2.068 print_stall=0 extruder: target=215 temp=215.0 pwm=0.440
Stats 4851.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2610436 bytes_read=1392269 bytes_retransmit=9 bytes_invalid=0 send_seq=74991 receive_seq=74991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=698658 sysload=0.10 cputime=191.219 memavail=1630124 print_time=4862.726 buffer_time=2.562 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 4852.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2611046 bytes_read=1392651 bytes_retransmit=9 bytes_invalid=0 send_seq=75010 receive_seq=75010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=698750 sysload=0.10 cputime=191.276 memavail=1629376 print_time=4863.586 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 4853.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2611667 bytes_read=1393078 bytes_retransmit=9 bytes_invalid=0 send_seq=75032 receive_seq=75032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=698812 sysload=0.10 cputime=191.314 memavail=1629564 print_time=4864.503 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 4854.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2612222 bytes_read=1393469 bytes_retransmit=9 bytes_invalid=0 send_seq=75050 receive_seq=75050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.8 pwm=0.829 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=698874 sysload=0.10 cputime=191.370 memavail=1629216 print_time=4865.464 buffer_time=2.298 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 4855.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2612760 bytes_read=1393856 bytes_retransmit=9 bytes_invalid=0 send_seq=75067 receive_seq=75067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=698935 sysload=0.10 cputime=191.427 memavail=1629236 print_time=4866.473 buffer_time=2.307 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 4856.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2613435 bytes_read=1394283 bytes_retransmit=9 bytes_invalid=0 send_seq=75089 receive_seq=75089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.618 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=699024 sysload=0.10 cputime=191.467 memavail=1629004 print_time=4867.532 buffer_time=2.365 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 4857.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2614066 bytes_read=1394684 bytes_retransmit=9 bytes_invalid=0 send_seq=75109 receive_seq=75109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.294 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=699088 sysload=0.10 cputime=191.526 memavail=1629236 print_time=4868.630 buffer_time=2.463 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 4858.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2614681 bytes_read=1395066 bytes_retransmit=9 bytes_invalid=0 send_seq=75128 receive_seq=75128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.0 pwm=0.115 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=699149 sysload=0.10 cputime=191.585 memavail=1629444 print_time=4869.761 buffer_time=2.594 print_stall=0 extruder: target=215 temp=215.1 pwm=0.500
Stats 4859.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2615322 bytes_read=1395497 bytes_retransmit=9 bytes_invalid=0 send_seq=75148 receive_seq=75148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.459 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=699212 sysload=0.10 cputime=191.622 memavail=1629484 print_time=4870.927 buffer_time=2.758 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 4860.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2615899 bytes_read=1395894 bytes_retransmit=9 bytes_invalid=0 send_seq=75167 receive_seq=75167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=699274 sysload=0.09 cputime=191.678 memavail=1629456 print_time=4872.126 buffer_time=2.957 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 4861.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2616513 bytes_read=1396276 bytes_retransmit=9 bytes_invalid=0 send_seq=75186 receive_seq=75186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.1 pwm=0.024 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=699369 sysload=0.09 cputime=191.736 memavail=1629444 print_time=4873.373 buffer_time=3.203 print_stall=0 extruder: target=215 temp=214.9 pwm=0.511
Stats 4862.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2616824 bytes_read=1396692 bytes_retransmit=9 bytes_invalid=0 send_seq=75203 receive_seq=75203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=699369 sysload=0.09 cputime=191.790 memavail=1629260 print_time=4873.373 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 4863.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2617525 bytes_read=1397084 bytes_retransmit=9 bytes_invalid=0 send_seq=75224 receive_seq=75224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=699430 sysload=0.09 cputime=191.829 memavail=1629532 print_time=4874.620 buffer_time=2.449 print_stall=0 extruder: target=215 temp=215.1 pwm=0.429
Stats 4864.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=2618115 bytes_read=1397461 bytes_retransmit=9 bytes_invalid=0 send_seq=75242 receive_seq=75242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=699462 sysload=0.09 cputime=191.885 memavail=1629264 print_time=4875.659 buffer_time=2.487 print_stall=0 extruder: target=215 temp=215.2 pwm=0.332
Stats 4865.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2618847 bytes_read=1397917 bytes_retransmit=9 bytes_invalid=0 send_seq=75264 receive_seq=75264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.071 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=699554 sysload=0.08 cputime=191.944 memavail=1629264 print_time=4877.211 buffer_time=3.038 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 4866.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2619049 bytes_read=1398264 bytes_retransmit=9 bytes_invalid=0 send_seq=75276 receive_seq=75276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.8 pwm=0.896 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=699554 sysload=0.08 cputime=191.995 memavail=1629520 print_time=4877.211 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.8 pwm=0.506
Stats 4867.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2619723 bytes_read=1398656 bytes_retransmit=9 bytes_invalid=0 send_seq=75297 receive_seq=75297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=699616 sysload=0.08 cputime=192.051 memavail=1629524 print_time=4878.541 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 4868.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2620420 bytes_read=1399097 bytes_retransmit=9 bytes_invalid=0 send_seq=75319 receive_seq=75319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=699708 sysload=0.08 cputime=192.110 memavail=1629264 print_time=4879.895 buffer_time=2.721 print_stall=0 extruder: target=215 temp=214.8 pwm=0.504
Stats 4869.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000048 bytes_write=2621075 bytes_read=1399484 bytes_retransmit=9 bytes_invalid=0 send_seq=75339 receive_seq=75339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=699771 sysload=0.08 cputime=192.169 memavail=1629528 print_time=4881.271 buffer_time=3.096 print_stall=0 extruder: target=215 temp=214.8 pwm=0.451
Stats 4870.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2621271 bytes_read=1399851 bytes_retransmit=9 bytes_invalid=0 send_seq=75352 receive_seq=75352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.464 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=699771 sysload=0.07 cputime=192.223 memavail=1630012 print_time=4881.271 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 4871.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2621946 bytes_read=1400287 bytes_retransmit=9 bytes_invalid=0 send_seq=75373 receive_seq=75373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=54.5 mcu_temp: temp=40.7 sd_pos=699833 sysload=0.07 cputime=192.282 memavail=1629768 print_time=4882.661 buffer_time=2.485 print_stall=0 extruder: target=215 temp=215.0 pwm=0.397
Stats 4872.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2622602 bytes_read=1400674 bytes_retransmit=9 bytes_invalid=0 send_seq=75393 receive_seq=75393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.021 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=699896 sysload=0.07 cputime=192.337 memavail=1630068 print_time=4884.066 buffer_time=2.889 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 4873.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2623166 bytes_read=1401071 bytes_retransmit=9 bytes_invalid=0 send_seq=75412 receive_seq=75412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=699957 sysload=0.07 cputime=192.395 memavail=1630632 print_time=4885.485 buffer_time=3.308 print_stall=0 extruder: target=215 temp=214.8 pwm=0.555
Stats 4874.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2623480 bytes_read=1401462 bytes_retransmit=9 bytes_invalid=0 send_seq=75427 receive_seq=75427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=699957 sysload=0.07 cputime=192.449 memavail=1630904 print_time=4885.485 buffer_time=2.307 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 4875.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2624154 bytes_read=1401869 bytes_retransmit=9 bytes_invalid=0 send_seq=75448 receive_seq=75448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=700021 sysload=0.23 cputime=192.506 memavail=1630956 print_time=4886.920 buffer_time=2.741 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 4876.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2624827 bytes_read=1402276 bytes_retransmit=9 bytes_invalid=0 send_seq=75469 receive_seq=75469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=700110 sysload=0.23 cputime=192.563 memavail=1630972 print_time=4888.369 buffer_time=3.190 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 4877.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2625023 bytes_read=1402657 bytes_retransmit=9 bytes_invalid=0 send_seq=75482 receive_seq=75482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=700110 sysload=0.23 cputime=192.616 memavail=1630704 print_time=4888.369 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 4878.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2625685 bytes_read=1403049 bytes_retransmit=9 bytes_invalid=0 send_seq=75503 receive_seq=75503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=700206 sysload=0.23 cputime=192.674 memavail=1630720 print_time=4889.831 buffer_time=2.650 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 4879.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2626393 bytes_read=1403466 bytes_retransmit=9 bytes_invalid=0 send_seq=75526 receive_seq=75526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=700266 sysload=0.23 cputime=192.734 memavail=1630960 print_time=4891.299 buffer_time=3.118 print_stall=0 extruder: target=215 temp=214.9 pwm=0.583
Stats 4880.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2626625 bytes_read=1403867 bytes_retransmit=9 bytes_invalid=0 send_seq=75540 receive_seq=75540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=700266 sysload=0.21 cputime=192.790 memavail=1630660 print_time=4891.299 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.8 pwm=0.617
Stats 4881.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2627302 bytes_read=1404259 bytes_retransmit=9 bytes_invalid=0 send_seq=75561 receive_seq=75561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.612 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=700329 sysload=0.21 cputime=192.848 memavail=1630468 print_time=4892.775 buffer_time=2.592 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 4882.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2628008 bytes_read=1404666 bytes_retransmit=9 bytes_invalid=0 send_seq=75584 receive_seq=75584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=700390 sysload=0.21 cputime=192.907 memavail=1629984 print_time=4894.259 buffer_time=3.075 print_stall=0 extruder: target=215 temp=214.9 pwm=0.465
Stats 4883.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2628233 bytes_read=1405039 bytes_retransmit=9 bytes_invalid=0 send_seq=75598 receive_seq=75598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=57.0 mcu_temp: temp=41.1 sd_pos=700390 sysload=0.21 cputime=192.960 memavail=1629652 print_time=4894.259 buffer_time=2.074 print_stall=0 extruder: target=215 temp=214.6 pwm=0.659
Stats 4884.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2628955 bytes_read=1405431 bytes_retransmit=9 bytes_invalid=0 send_seq=75621 receive_seq=75621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.151 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=700453 sysload=0.21 cputime=193.017 memavail=1629652 print_time=4895.749 buffer_time=2.564 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 4885.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2629629 bytes_read=1405843 bytes_retransmit=9 bytes_invalid=0 send_seq=75642 receive_seq=75642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=700546 sysload=0.19 cputime=193.074 memavail=1629724 print_time=4897.246 buffer_time=3.061 print_stall=0 extruder: target=215 temp=214.9 pwm=0.428
Stats 4886.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2629851 bytes_read=1406229 bytes_retransmit=9 bytes_invalid=0 send_seq=75656 receive_seq=75656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=700546 sysload=0.19 cputime=193.127 memavail=1629716 print_time=4897.246 buffer_time=2.060 print_stall=0 extruder: target=215 temp=214.9 pwm=0.437
Stats 4887.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2630532 bytes_read=1406616 bytes_retransmit=9 bytes_invalid=0 send_seq=75676 receive_seq=75676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=700610 sysload=0.19 cputime=193.182 memavail=1629736 print_time=4898.751 buffer_time=2.565 print_stall=0 extruder: target=215 temp=214.8 pwm=0.545
Stats 4888.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2631199 bytes_read=1407028 bytes_retransmit=9 bytes_invalid=0 send_seq=75698 receive_seq=75698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.339 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=700672 sysload=0.19 cputime=193.237 memavail=1629476 print_time=4900.255 buffer_time=3.068 print_stall=0 extruder: target=215 temp=214.7 pwm=0.544
Stats 4889.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2631426 bytes_read=1407419 bytes_retransmit=9 bytes_invalid=0 send_seq=75713 receive_seq=75713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=700672 sysload=0.19 cputime=193.293 memavail=1629476 print_time=4900.255 buffer_time=2.067 print_stall=0 extruder: target=215 temp=214.7 pwm=0.521
Stats 4890.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2632147 bytes_read=1407831 bytes_retransmit=9 bytes_invalid=0 send_seq=75735 receive_seq=75735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=700735 sysload=0.18 cputime=193.349 memavail=1629240 print_time=4901.759 buffer_time=2.570 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 4891.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2632788 bytes_read=1408233 bytes_retransmit=9 bytes_invalid=0 send_seq=75755 receive_seq=75755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=700796 sysload=0.18 cputime=193.407 memavail=1629236 print_time=4903.263 buffer_time=3.074 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 4892.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2633030 bytes_read=1408624 bytes_retransmit=9 bytes_invalid=0 send_seq=75770 receive_seq=75770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=700796 sysload=0.18 cputime=193.460 memavail=1629460 print_time=4903.263 buffer_time=2.073 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 4893.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2633693 bytes_read=1409011 bytes_retransmit=9 bytes_invalid=0 send_seq=75790 receive_seq=75790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=700857 sysload=0.18 cputime=193.513 memavail=1629448 print_time=4904.767 buffer_time=2.576 print_stall=0 extruder: target=215 temp=214.9 pwm=0.420
Stats 4894.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2634353 bytes_read=1409408 bytes_retransmit=9 bytes_invalid=0 send_seq=75809 receive_seq=75809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.148 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=700916 sysload=0.18 cputime=193.570 memavail=1629468 print_time=4906.271 buffer_time=3.080 print_stall=0 extruder: target=215 temp=215.2 pwm=0.313
Stats 4895.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2634567 bytes_read=1409799 bytes_retransmit=9 bytes_invalid=0 send_seq=75821 receive_seq=75821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.042 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=700916 sysload=0.16 cputime=193.624 memavail=1629484 print_time=4906.271 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 4896.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2635236 bytes_read=1410186 bytes_retransmit=9 bytes_invalid=0 send_seq=75841 receive_seq=75841 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=701012 sysload=0.16 cputime=193.678 memavail=1629468 print_time=4907.784 buffer_time=2.591 print_stall=0 extruder: target=215 temp=214.8 pwm=0.596
Stats 4897.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2635881 bytes_read=1410583 bytes_retransmit=9 bytes_invalid=0 send_seq=75860 receive_seq=75860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.452 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=701074 sysload=0.16 cputime=193.735 memavail=1629484 print_time=4909.273 buffer_time=3.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 4898.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2636104 bytes_read=1410969 bytes_retransmit=9 bytes_invalid=0 send_seq=75874 receive_seq=75874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=701074 sysload=0.16 cputime=193.786 memavail=1629424 print_time=4909.273 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.1 pwm=0.343
Stats 4899.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2636799 bytes_read=1411361 bytes_retransmit=9 bytes_invalid=0 send_seq=75895 receive_seq=75895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=701135 sysload=0.16 cputime=193.843 memavail=1629908 print_time=4910.764 buffer_time=2.570 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 4900.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2637501 bytes_read=1411799 bytes_retransmit=9 bytes_invalid=0 send_seq=75917 receive_seq=75917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.165 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=701196 sysload=0.15 cputime=193.904 memavail=1629928 print_time=4912.249 buffer_time=3.054 print_stall=0 extruder: target=215 temp=214.8 pwm=0.524
Stats 4901.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2637703 bytes_read=1412175 bytes_retransmit=9 bytes_invalid=0 send_seq=75929 receive_seq=75929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=701196 sysload=0.15 cputime=193.960 memavail=1629924 print_time=4912.249 buffer_time=2.053 print_stall=0 extruder: target=215 temp=214.8 pwm=0.566
Stats 4902.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2638366 bytes_read=1412562 bytes_retransmit=9 bytes_invalid=0 send_seq=75949 receive_seq=75949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=701258 sysload=0.15 cputime=194.015 memavail=1629412 print_time=4913.726 buffer_time=2.530 print_stall=0 extruder: target=215 temp=214.7 pwm=0.647
Stats 4903.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2639044 bytes_read=1412969 bytes_retransmit=9 bytes_invalid=0 send_seq=75970 receive_seq=75970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.8 pwm=0.955 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=701351 sysload=0.15 cputime=194.071 memavail=1629384 print_time=4915.209 buffer_time=3.012 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 4904.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2639246 bytes_read=1413345 bytes_retransmit=9 bytes_invalid=0 send_seq=75982 receive_seq=75982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=701351 sysload=0.15 cputime=194.122 memavail=1629416 print_time=4915.209 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 4905.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2639863 bytes_read=1413737 bytes_retransmit=9 bytes_invalid=0 send_seq=76000 receive_seq=76000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=701446 sysload=0.14 cputime=194.177 memavail=1629404 print_time=4916.672 buffer_time=2.475 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 4906.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2640545 bytes_read=1414144 bytes_retransmit=9 bytes_invalid=0 send_seq=76021 receive_seq=76021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.8 pwm=0.775 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=701508 sysload=0.14 cputime=194.235 memavail=1629420 print_time=4918.109 buffer_time=2.911 print_stall=0 extruder: target=215 temp=214.8 pwm=0.535
Stats 4907.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2641157 bytes_read=1414550 bytes_retransmit=9 bytes_invalid=0 send_seq=76039 receive_seq=76039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=701571 sysload=0.14 cputime=194.292 memavail=1629432 print_time=4919.546 buffer_time=3.347 print_stall=0 extruder: target=215 temp=215.0 pwm=0.369
Stats 4908.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2641435 bytes_read=1414907 bytes_retransmit=9 bytes_invalid=0 send_seq=76053 receive_seq=76053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.452 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=701571 sysload=0.14 cputime=194.345 memavail=1629680 print_time=4919.546 buffer_time=2.346 print_stall=0 extruder: target=215 temp=214.8 pwm=0.568
Stats 4909.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2642111 bytes_read=1415314 bytes_retransmit=9 bytes_invalid=0 send_seq=76074 receive_seq=76074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=701633 sysload=0.14 cputime=194.403 memavail=1629940 print_time=4920.968 buffer_time=2.767 print_stall=0 extruder: target=215 temp=214.8 pwm=0.593
Stats 4910.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2642784 bytes_read=1415750 bytes_retransmit=9 bytes_invalid=0 send_seq=76095 receive_seq=76095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.497 rpi: temp=54.5 mcu_temp: temp=41.8 sd_pos=701696 sysload=0.13 cputime=194.462 memavail=1630168 print_time=4922.375 buffer_time=3.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 4911.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2643012 bytes_read=1416102 bytes_retransmit=9 bytes_invalid=0 send_seq=76108 receive_seq=76108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=701696 sysload=0.13 cputime=194.514 memavail=1630200 print_time=4922.375 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 4912.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2643694 bytes_read=1416509 bytes_retransmit=9 bytes_invalid=0 send_seq=76129 receive_seq=76129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=701757 sysload=0.13 cputime=194.571 memavail=1629676 print_time=4923.767 buffer_time=2.564 print_stall=0 extruder: target=215 temp=215.2 pwm=0.318
Stats 4913.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2644384 bytes_read=1416930 bytes_retransmit=9 bytes_invalid=0 send_seq=76150 receive_seq=76150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=701853 sysload=0.13 cputime=194.630 memavail=1630184 print_time=4925.157 buffer_time=2.954 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 4914.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2644934 bytes_read=1417302 bytes_retransmit=9 bytes_invalid=0 send_seq=76167 receive_seq=76167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=701915 sysload=0.13 cputime=194.684 memavail=1630192 print_time=4926.501 buffer_time=3.298 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 4915.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2645224 bytes_read=1417694 bytes_retransmit=9 bytes_invalid=0 send_seq=76182 receive_seq=76182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=701915 sysload=0.12 cputime=194.738 memavail=1629956 print_time=4926.501 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 4916.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2645932 bytes_read=1418125 bytes_retransmit=9 bytes_invalid=0 send_seq=76205 receive_seq=76205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=701979 sysload=0.12 cputime=194.795 memavail=1630208 print_time=4927.835 buffer_time=2.630 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 4917.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2646592 bytes_read=1418512 bytes_retransmit=9 bytes_invalid=0 send_seq=76225 receive_seq=76225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=702041 sysload=0.12 cputime=194.852 memavail=1629952 print_time=4929.146 buffer_time=2.940 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 4918.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2647103 bytes_read=1418904 bytes_retransmit=9 bytes_invalid=0 send_seq=76243 receive_seq=76243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.420 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=702073 sysload=0.12 cputime=194.907 memavail=1629980 print_time=4930.182 buffer_time=2.975 print_stall=0 extruder: target=215 temp=215.0 pwm=0.539
Stats 4919.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2647423 bytes_read=1419295 bytes_retransmit=9 bytes_invalid=0 send_seq=76258 receive_seq=76258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=702105 sysload=0.12 cputime=194.964 memavail=1629964 print_time=4930.433 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 4920.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2648150 bytes_read=1419707 bytes_retransmit=9 bytes_invalid=0 send_seq=76280 receive_seq=76280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=702196 sysload=0.11 cputime=195.022 memavail=1630040 print_time=4931.696 buffer_time=2.489 print_stall=0 extruder: target=215 temp=215.1 pwm=0.535
Stats 4921.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2648799 bytes_read=1420129 bytes_retransmit=9 bytes_invalid=0 send_seq=76301 receive_seq=76301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=702257 sysload=0.11 cputime=195.077 memavail=1630296 print_time=4932.933 buffer_time=2.725 print_stall=0 extruder: target=215 temp=215.2 pwm=0.352
Stats 4922.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2649465 bytes_read=1420540 bytes_retransmit=9 bytes_invalid=0 send_seq=76323 receive_seq=76323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=702316 sysload=0.11 cputime=195.133 memavail=1630472 print_time=4934.138 buffer_time=2.929 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 4923.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2650061 bytes_read=1420937 bytes_retransmit=9 bytes_invalid=0 send_seq=76345 receive_seq=76345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=702380 sysload=0.11 cputime=195.175 memavail=1631304 print_time=4935.308 buffer_time=3.099 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 4924.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000040 bytes_write=2650324 bytes_read=1421329 bytes_retransmit=9 bytes_invalid=0 send_seq=76360 receive_seq=76360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=702380 sysload=0.11 cputime=195.229 memavail=1630544 print_time=4935.308 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 4925.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2650948 bytes_read=1421745 bytes_retransmit=9 bytes_invalid=0 send_seq=76380 receive_seq=76380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=702442 sysload=0.10 cputime=195.284 memavail=1630308 print_time=4936.445 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 4926.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2651616 bytes_read=1422142 bytes_retransmit=9 bytes_invalid=0 send_seq=76402 receive_seq=76402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.046 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=702533 sysload=0.10 cputime=195.342 memavail=1629800 print_time=4937.569 buffer_time=2.357 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 4927.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2652217 bytes_read=1422564 bytes_retransmit=9 bytes_invalid=0 send_seq=76423 receive_seq=76423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=702595 sysload=0.10 cputime=195.398 memavail=1629804 print_time=4938.609 buffer_time=2.397 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 4928.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2652827 bytes_read=1422970 bytes_retransmit=9 bytes_invalid=0 send_seq=76444 receive_seq=76444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=0.721 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=702656 sysload=0.10 cputime=195.455 memavail=1630048 print_time=4939.627 buffer_time=2.413 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 4929.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2653449 bytes_read=1423362 bytes_retransmit=9 bytes_invalid=0 send_seq=76465 receive_seq=76465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=702717 sysload=0.10 cputime=195.511 memavail=1629796 print_time=4940.595 buffer_time=2.381 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 4930.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2654007 bytes_read=1423789 bytes_retransmit=9 bytes_invalid=0 send_seq=76484 receive_seq=76484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=702811 sysload=0.09 cputime=195.569 memavail=1629548 print_time=4941.542 buffer_time=2.327 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 4931.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2654596 bytes_read=1424190 bytes_retransmit=9 bytes_invalid=0 send_seq=76504 receive_seq=76504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=702875 sysload=0.09 cputime=195.625 memavail=1629012 print_time=4942.381 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 4932.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2655493 bytes_read=1424597 bytes_retransmit=9 bytes_invalid=0 send_seq=76528 receive_seq=76528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=703032 sysload=0.09 cputime=195.683 memavail=1628788 print_time=4943.950 buffer_time=2.734 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 4933.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2656093 bytes_read=1425004 bytes_retransmit=9 bytes_invalid=0 send_seq=76546 receive_seq=76546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=703096 sysload=0.09 cputime=195.739 memavail=1629004 print_time=4944.566 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 4934.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=2657079 bytes_read=1425435 bytes_retransmit=9 bytes_invalid=0 send_seq=76572 receive_seq=76572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.565 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=703393 sysload=0.09 cputime=195.800 memavail=1628748 print_time=4945.704 buffer_time=2.487 print_stall=0 extruder: target=215 temp=214.9 pwm=0.590
Stats 4935.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2657986 bytes_read=1425857 bytes_retransmit=9 bytes_invalid=0 send_seq=76596 receive_seq=76596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=703686 sysload=0.08 cputime=195.860 memavail=1629192 print_time=4946.387 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 4936.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2658598 bytes_read=1426264 bytes_retransmit=9 bytes_invalid=0 send_seq=76614 receive_seq=76614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.043 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=703931 sysload=0.08 cputime=195.924 memavail=1628620 print_time=4947.430 buffer_time=2.212 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 4937.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2659248 bytes_read=1426650 bytes_retransmit=9 bytes_invalid=0 send_seq=76631 receive_seq=76631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=704172 sysload=0.08 cputime=195.984 memavail=1628852 print_time=4948.473 buffer_time=2.255 print_stall=0 extruder: target=215 temp=214.9 pwm=0.583
Stats 4938.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2659808 bytes_read=1427017 bytes_retransmit=9 bytes_invalid=0 send_seq=76647 receive_seq=76647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=704358 sysload=0.08 cputime=196.044 memavail=1628880 print_time=4949.256 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.8 pwm=0.585
Stats 4939.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2660541 bytes_read=1427439 bytes_retransmit=9 bytes_invalid=0 send_seq=76668 receive_seq=76668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=704608 sysload=0.08 cputime=196.109 memavail=1629128 print_time=4950.299 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 4940.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2661466 bytes_read=1427865 bytes_retransmit=9 bytes_invalid=0 send_seq=76690 receive_seq=76690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.311 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=704925 sysload=0.08 cputime=196.173 memavail=1628856 print_time=4951.397 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 4941.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2662138 bytes_read=1428244 bytes_retransmit=9 bytes_invalid=0 send_seq=76709 receive_seq=76709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=705167 sysload=0.08 cputime=196.234 memavail=1628896 print_time=4952.467 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.9 pwm=0.568
Stats 4942.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2662748 bytes_read=1428639 bytes_retransmit=9 bytes_invalid=0 send_seq=76727 receive_seq=76727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.502 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=705351 sysload=0.08 cputime=196.296 memavail=1629396 print_time=4953.270 buffer_time=2.050 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 4943.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2663363 bytes_read=1429014 bytes_retransmit=9 bytes_invalid=0 send_seq=76744 receive_seq=76744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=705602 sysload=0.08 cputime=196.340 memavail=1629652 print_time=4954.340 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.1 pwm=0.327
Stats 4944.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=2664099 bytes_read=1429386 bytes_retransmit=9 bytes_invalid=0 send_seq=76763 receive_seq=76763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=705956 sysload=0.08 cputime=196.405 memavail=1629888 print_time=4955.598 buffer_time=2.376 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 4945.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2664849 bytes_read=1429817 bytes_retransmit=9 bytes_invalid=0 send_seq=76784 receive_seq=76784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=706138 sysload=0.07 cputime=196.470 memavail=1629412 print_time=4956.476 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 4946.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2665394 bytes_read=1430198 bytes_retransmit=9 bytes_invalid=0 send_seq=76800 receive_seq=76800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=706322 sysload=0.07 cputime=196.532 memavail=1629084 print_time=4957.573 buffer_time=2.349 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 4947.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2665913 bytes_read=1430570 bytes_retransmit=9 bytes_invalid=0 send_seq=76817 receive_seq=76817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.533 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=706440 sysload=0.07 cputime=196.591 memavail=1629352 print_time=4958.303 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 4948.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2666500 bytes_read=1430972 bytes_retransmit=9 bytes_invalid=0 send_seq=76834 receive_seq=76834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.707 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=706623 sysload=0.07 cputime=196.654 memavail=1629276 print_time=4959.400 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.1 pwm=0.507
Stats 4949.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2667051 bytes_read=1431363 bytes_retransmit=9 bytes_invalid=0 send_seq=76852 receive_seq=76852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=706814 sysload=0.07 cputime=196.716 memavail=1629596 print_time=4960.496 buffer_time=2.271 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 4950.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2667568 bytes_read=1431750 bytes_retransmit=9 bytes_invalid=0 send_seq=76869 receive_seq=76869 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.428 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=706936 sysload=0.06 cputime=196.775 memavail=1629600 print_time=4961.226 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 4951.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2668132 bytes_read=1432157 bytes_retransmit=9 bytes_invalid=0 send_seq=76887 receive_seq=76887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.599 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=707166 sysload=0.06 cputime=196.838 memavail=1629524 print_time=4962.233 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 4952.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2669326 bytes_read=1432598 bytes_retransmit=9 bytes_invalid=0 send_seq=76915 receive_seq=76915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=707360 sysload=0.06 cputime=196.899 memavail=1629292 print_time=4963.410 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.2 pwm=0.442
Stats 4953.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2670286 bytes_read=1433015 bytes_retransmit=9 bytes_invalid=0 send_seq=76941 receive_seq=76941 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=707515 sysload=0.06 cputime=196.961 memavail=1628976 print_time=4964.773 buffer_time=2.544 print_stall=0 extruder: target=215 temp=215.4 pwm=0.273
Stats 4954.4: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=2670887 bytes_read=1433432 bytes_retransmit=9 bytes_invalid=0 send_seq=76961 receive_seq=76961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=707576 sysload=0.06 cputime=197.022 memavail=1629244 print_time=4965.556 buffer_time=2.326 print_stall=0 extruder: target=215 temp=215.2 pwm=0.502
Stats 4955.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2671491 bytes_read=1433853 bytes_retransmit=9 bytes_invalid=0 send_seq=76982 receive_seq=76982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.466 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=707668 sysload=0.06 cputime=197.083 memavail=1629236 print_time=4966.409 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.0 pwm=0.614
Stats 4956.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2672068 bytes_read=1434240 bytes_retransmit=9 bytes_invalid=0 send_seq=77002 receive_seq=77002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.8 pwm=0.931 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=707730 sysload=0.06 cputime=197.139 memavail=1628992 print_time=4967.321 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.0 pwm=0.610
Stats 4957.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2672684 bytes_read=1434662 bytes_retransmit=9 bytes_invalid=0 send_seq=77023 receive_seq=77023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=707792 sysload=0.06 cputime=197.197 memavail=1628976 print_time=4968.277 buffer_time=2.046 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 4958.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2673238 bytes_read=1435058 bytes_retransmit=9 bytes_invalid=0 send_seq=77042 receive_seq=77042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=707853 sysload=0.06 cputime=197.253 memavail=1628724 print_time=4969.282 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.2 pwm=0.360
Stats 4959.4: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=2673883 bytes_read=1435455 bytes_retransmit=9 bytes_invalid=0 send_seq=77064 receive_seq=77064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=707944 sysload=0.06 cputime=197.310 memavail=1628992 print_time=4970.335 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.0 pwm=0.523
Stats 4960.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2674515 bytes_read=1435897 bytes_retransmit=9 bytes_invalid=0 send_seq=77086 receive_seq=77086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=708004 sysload=0.05 cputime=197.368 memavail=1628920 print_time=4971.430 buffer_time=2.197 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 4961.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2675163 bytes_read=1436308 bytes_retransmit=9 bytes_invalid=0 send_seq=77108 receive_seq=77108 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=708067 sysload=0.05 cputime=197.426 memavail=1628432 print_time=4972.557 buffer_time=2.324 print_stall=0 extruder: target=215 temp=214.9 pwm=0.577
Stats 4962.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2675803 bytes_read=1436721 bytes_retransmit=9 bytes_invalid=0 send_seq=77131 receive_seq=77131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=708128 sysload=0.05 cputime=197.487 memavail=1628164 print_time=4973.719 buffer_time=2.485 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 4963.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2676457 bytes_read=1437138 bytes_retransmit=9 bytes_invalid=0 send_seq=77151 receive_seq=77151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=54.9 pwm=0.473 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=708192 sysload=0.05 cputime=197.544 memavail=1628400 print_time=4974.914 buffer_time=2.680 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 4964.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2677073 bytes_read=1437534 bytes_retransmit=9 bytes_invalid=0 send_seq=77170 receive_seq=77170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=55 temp=55.1 pwm=0.031 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=708284 sysload=0.05 cputime=197.601 memavail=1628416 print_time=4976.144 buffer_time=2.909 print_stall=0 extruder: target=215 temp=215.2 pwm=0.363
Stats 4965.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2677747 bytes_read=1437946 bytes_retransmit=9 bytes_invalid=0 send_seq=77192 receive_seq=77192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.015 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=708346 sysload=0.05 cputime=197.659 memavail=1628404 print_time=4977.401 buffer_time=3.165 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 4966.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2677962 bytes_read=1438333 bytes_retransmit=9 bytes_invalid=0 send_seq=77206 receive_seq=77206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=708346 sysload=0.05 cputime=197.714 memavail=1628416 print_time=4977.401 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 4967.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2678621 bytes_read=1438739 bytes_retransmit=9 bytes_invalid=0 send_seq=77227 receive_seq=77227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=708407 sysload=0.05 cputime=197.770 memavail=1628092 print_time=4978.681 buffer_time=2.444 print_stall=0 extruder: target=215 temp=215.1 pwm=0.381
Stats 4968.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2679286 bytes_read=1439131 bytes_retransmit=9 bytes_invalid=0 send_seq=77248 receive_seq=77248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=708469 sysload=0.05 cputime=197.828 memavail=1628656 print_time=4979.985 buffer_time=2.747 print_stall=0 extruder: target=215 temp=215.2 pwm=0.323
Stats 4969.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2679921 bytes_read=1439543 bytes_retransmit=9 bytes_invalid=0 send_seq=77267 receive_seq=77267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=708531 sysload=0.05 cputime=197.886 memavail=1628480 print_time=4981.312 buffer_time=3.073 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 4970.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=2680142 bytes_read=1439924 bytes_retransmit=9 bytes_invalid=0 send_seq=77280 receive_seq=77280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.8 pwm=0.816 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=708531 sysload=0.04 cputime=197.939 memavail=1628496 print_time=4981.312 buffer_time=2.073 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 4971.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=2680782 bytes_read=1440306 bytes_retransmit=9 bytes_invalid=0 send_seq=77299 receive_seq=77299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=708627 sysload=0.04 cputime=197.996 memavail=1628260 print_time=4982.663 buffer_time=2.423 print_stall=0 extruder: target=215 temp=214.8 pwm=0.587
Stats 4972.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=2681429 bytes_read=1440728 bytes_retransmit=9 bytes_invalid=0 send_seq=77320 receive_seq=77320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=708689 sysload=0.04 cputime=198.056 memavail=1628432 print_time=4984.036 buffer_time=2.795 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 4973.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=2682098 bytes_read=1441139 bytes_retransmit=9 bytes_invalid=0 send_seq=77342 receive_seq=77342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.350 rpi: temp=54.0 mcu_temp: temp=42.4 sd_pos=708753 sysload=0.04 cputime=198.100 memavail=1628444 print_time=4985.423 buffer_time=3.182 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 4974.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=2682319 bytes_read=1441496 bytes_retransmit=9 bytes_invalid=0 send_seq=77356 receive_seq=77356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=708753 sysload=0.04 cputime=198.155 memavail=1628204 print_time=4985.423 buffer_time=2.182 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 4975.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2682976 bytes_read=1441928 bytes_retransmit=9 bytes_invalid=0 send_seq=77376 receive_seq=77376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.423 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=708815 sysload=0.04 cputime=198.215 memavail=1628444 print_time=4986.826 buffer_time=2.583 print_stall=0 extruder: target=215 temp=215.2 pwm=0.323
Stats 4976.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2683692 bytes_read=1442344 bytes_retransmit=9 bytes_invalid=0 send_seq=77399 receive_seq=77399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=708878 sysload=0.04 cputime=198.277 memavail=1628460 print_time=4988.243 buffer_time=3.000 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 4977.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2683899 bytes_read=1442696 bytes_retransmit=9 bytes_invalid=0 send_seq=77412 receive_seq=77412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=708878 sysload=0.04 cputime=198.315 memavail=1628380 print_time=4988.243 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 4978.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2684585 bytes_read=1443118 bytes_retransmit=9 bytes_invalid=0 send_seq=77433 receive_seq=77433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=708938 sysload=0.04 cputime=198.375 memavail=1628396 print_time=4989.674 buffer_time=2.431 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 4979.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2685260 bytes_read=1443529 bytes_retransmit=9 bytes_invalid=0 send_seq=77455 receive_seq=77455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=709032 sysload=0.04 cputime=198.436 memavail=1628248 print_time=4991.121 buffer_time=2.877 print_stall=0 extruder: target=215 temp=215.3 pwm=0.262
Stats 4980.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2685914 bytes_read=1443936 bytes_retransmit=9 bytes_invalid=0 send_seq=77476 receive_seq=77476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=709094 sysload=0.04 cputime=198.499 memavail=1628732 print_time=4992.580 buffer_time=3.335 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 4981.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2686163 bytes_read=1444328 bytes_retransmit=9 bytes_invalid=0 send_seq=77491 receive_seq=77491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.600 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=709094 sysload=0.04 cputime=198.556 memavail=1628672 print_time=4992.580 buffer_time=2.334 print_stall=0 extruder: target=215 temp=214.9 pwm=0.559
Stats 4982.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2686835 bytes_read=1444729 bytes_retransmit=9 bytes_invalid=0 send_seq=77511 receive_seq=77511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=709158 sysload=0.04 cputime=198.618 memavail=1628688 print_time=4994.047 buffer_time=2.800 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 4983.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2687531 bytes_read=1445126 bytes_retransmit=9 bytes_invalid=0 send_seq=77533 receive_seq=77533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=709219 sysload=0.04 cputime=198.680 memavail=1628500 print_time=4995.521 buffer_time=3.273 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 4984.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2687751 bytes_read=1445508 bytes_retransmit=9 bytes_invalid=0 send_seq=77546 receive_seq=77546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=709219 sysload=0.04 cputime=198.721 memavail=1629008 print_time=4995.521 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 4985.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2688418 bytes_read=1445929 bytes_retransmit=9 bytes_invalid=0 send_seq=77567 receive_seq=77567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=54.9 pwm=0.572 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=709282 sysload=0.03 cputime=198.781 memavail=1628996 print_time=4997.002 buffer_time=2.753 print_stall=0 extruder: target=215 temp=215.0 pwm=0.545
Stats 4986.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2689101 bytes_read=1446321 bytes_retransmit=9 bytes_invalid=0 send_seq=77588 receive_seq=77588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=54.9 pwm=0.565 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=709342 sysload=0.03 cputime=198.846 memavail=1629320 print_time=4998.490 buffer_time=3.240 print_stall=0 extruder: target=215 temp=215.0 pwm=0.590
Stats 4987.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2689326 bytes_read=1446713 bytes_retransmit=9 bytes_invalid=0 send_seq=77603 receive_seq=77603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=709342 sysload=0.03 cputime=198.907 memavail=1629804 print_time=4998.490 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 4988.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2690017 bytes_read=1447119 bytes_retransmit=9 bytes_invalid=0 send_seq=77624 receive_seq=77624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=709405 sysload=0.03 cputime=198.950 memavail=1629820 print_time=4999.985 buffer_time=2.733 print_stall=0 extruder: target=215 temp=215.3 pwm=0.238
Stats 4989.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2690639 bytes_read=1447496 bytes_retransmit=9 bytes_invalid=0 send_seq=77642 receive_seq=77642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=709467 sysload=0.03 cputime=199.010 memavail=1629804 print_time=5001.488 buffer_time=3.236 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 4990.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2690874 bytes_read=1447898 bytes_retransmit=9 bytes_invalid=0 send_seq=77656 receive_seq=77656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=709467 sysload=0.03 cputime=199.069 memavail=1629816 print_time=5001.488 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.9 pwm=0.606
Stats 4991.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2691602 bytes_read=1448314 bytes_retransmit=9 bytes_invalid=0 send_seq=77679 receive_seq=77679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=709530 sysload=0.03 cputime=199.133 memavail=1629552 print_time=5002.990 buffer_time=2.736 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 4992.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2692254 bytes_read=1448696 bytes_retransmit=9 bytes_invalid=0 send_seq=77698 receive_seq=77698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=709591 sysload=0.03 cputime=199.193 memavail=1629560 print_time=5004.492 buffer_time=3.238 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 4993.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2692456 bytes_read=1449073 bytes_retransmit=9 bytes_invalid=0 send_seq=77710 receive_seq=77710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=709591 sysload=0.03 cputime=199.236 memavail=1629824 print_time=5004.492 buffer_time=2.238 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 4994.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2693116 bytes_read=1449474 bytes_retransmit=9 bytes_invalid=0 send_seq=77730 receive_seq=77730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=709653 sysload=0.03 cputime=199.300 memavail=1629572 print_time=5005.994 buffer_time=2.739 print_stall=0 extruder: target=215 temp=214.7 pwm=0.563
Stats 4995.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2693798 bytes_read=1449881 bytes_retransmit=9 bytes_invalid=0 send_seq=77751 receive_seq=77751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=709714 sysload=0.03 cputime=199.345 memavail=1629068 print_time=5007.496 buffer_time=3.241 print_stall=0 extruder: target=215 temp=215.0 pwm=0.322
Stats 4996.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2694018 bytes_read=1450268 bytes_retransmit=9 bytes_invalid=0 send_seq=77765 receive_seq=77765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=709714 sysload=0.03 cputime=199.404 memavail=1629008 print_time=5007.496 buffer_time=2.240 print_stall=0 extruder: target=215 temp=214.8 pwm=0.513
Stats 4997.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2694680 bytes_read=1450669 bytes_retransmit=9 bytes_invalid=0 send_seq=77785 receive_seq=77785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=709778 sysload=0.03 cputime=199.468 memavail=1629024 print_time=5008.998 buffer_time=2.742 print_stall=0 extruder: target=215 temp=214.7 pwm=0.625
Stats 4998.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2695382 bytes_read=1451066 bytes_retransmit=9 bytes_invalid=0 send_seq=77807 receive_seq=77807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=709870 sysload=0.03 cputime=199.532 memavail=1629016 print_time=5010.510 buffer_time=3.253 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 4999.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2695636 bytes_read=1451463 bytes_retransmit=9 bytes_invalid=0 send_seq=77823 receive_seq=77823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=709870 sysload=0.03 cputime=199.591 memavail=1629252 print_time=5010.510 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 5000.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2696297 bytes_read=1451879 bytes_retransmit=9 bytes_invalid=0 send_seq=77843 receive_seq=77843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.031 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=709933 sysload=0.03 cputime=199.654 memavail=1629272 print_time=5011.997 buffer_time=2.738 print_stall=0 extruder: target=215 temp=215.1 pwm=0.387
Stats 5001.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2696964 bytes_read=1452265 bytes_retransmit=9 bytes_invalid=0 send_seq=77864 receive_seq=77864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.685 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=709995 sysload=0.03 cputime=199.718 memavail=1628752 print_time=5013.487 buffer_time=3.227 print_stall=0 extruder: target=215 temp=215.3 pwm=0.320
Stats 5002.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2697203 bytes_read=1452645 bytes_retransmit=9 bytes_invalid=0 send_seq=77879 receive_seq=77879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.442 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=709995 sysload=0.03 cputime=199.760 memavail=1628768 print_time=5013.487 buffer_time=2.226 print_stall=0 extruder: target=215 temp=214.9 pwm=0.552
Stats 5003.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2697875 bytes_read=1453040 bytes_retransmit=9 bytes_invalid=0 send_seq=77900 receive_seq=77900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=710058 sysload=0.03 cputime=199.819 memavail=1628700 print_time=5014.969 buffer_time=2.709 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 5004.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2698590 bytes_read=1453432 bytes_retransmit=9 bytes_invalid=0 send_seq=77923 receive_seq=77923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=710120 sysload=0.03 cputime=199.887 memavail=1628468 print_time=5016.445 buffer_time=3.184 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 5005.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=2698833 bytes_read=1453842 bytes_retransmit=9 bytes_invalid=0 send_seq=77939 receive_seq=77939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=710120 sysload=0.02 cputime=199.949 memavail=1628700 print_time=5016.445 buffer_time=2.184 print_stall=0 extruder: target=215 temp=214.9 pwm=0.558
Stats 5006.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=2699515 bytes_read=1454253 bytes_retransmit=9 bytes_invalid=0 send_seq=77961 receive_seq=77961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=710184 sysload=0.02 cputime=200.012 memavail=1628716 print_time=5017.913 buffer_time=2.652 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 5007.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=2700164 bytes_read=1454645 bytes_retransmit=9 bytes_invalid=0 send_seq=77982 receive_seq=77982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=710277 sysload=0.02 cputime=200.076 memavail=1628704 print_time=5019.389 buffer_time=3.127 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 5008.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=2700424 bytes_read=1455047 bytes_retransmit=9 bytes_invalid=0 send_seq=77999 receive_seq=77999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.422 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=710277 sysload=0.02 cputime=200.136 memavail=1628664 print_time=5019.389 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 5009.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=2701065 bytes_read=1455438 bytes_retransmit=9 bytes_invalid=0 send_seq=78017 receive_seq=78017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=710339 sysload=0.02 cputime=200.200 memavail=1628148 print_time=5020.824 buffer_time=2.561 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 5010.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2701754 bytes_read=1455850 bytes_retransmit=9 bytes_invalid=0 send_seq=78039 receive_seq=78039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.368 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=710401 sysload=0.02 cputime=200.263 memavail=1628420 print_time=5022.259 buffer_time=2.996 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 5011.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2702336 bytes_read=1456267 bytes_retransmit=9 bytes_invalid=0 send_seq=78059 receive_seq=78059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=710465 sysload=0.02 cputime=200.310 memavail=1628360 print_time=5023.680 buffer_time=3.415 print_stall=0 extruder: target=215 temp=214.8 pwm=0.557
Stats 5012.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2702665 bytes_read=1456653 bytes_retransmit=9 bytes_invalid=0 send_seq=78076 receive_seq=78076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.062 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=710465 sysload=0.02 cputime=200.370 memavail=1628596 print_time=5023.680 buffer_time=2.414 print_stall=0 extruder: target=215 temp=214.8 pwm=0.476
Stats 5013.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2703308 bytes_read=1457040 bytes_retransmit=9 bytes_invalid=0 send_seq=78096 receive_seq=78096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.776 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=710527 sysload=0.02 cputime=200.412 memavail=1629368 print_time=5025.086 buffer_time=2.819 print_stall=0 extruder: target=215 temp=215.1 pwm=0.386
Stats 5014.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2703988 bytes_read=1457481 bytes_retransmit=9 bytes_invalid=0 send_seq=78118 receive_seq=78118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=710590 sysload=0.02 cputime=200.475 memavail=1629116 print_time=5026.477 buffer_time=3.209 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 5015.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2704202 bytes_read=1457853 bytes_retransmit=9 bytes_invalid=0 send_seq=78132 receive_seq=78132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=710590 sysload=0.02 cputime=200.531 memavail=1629108 print_time=5026.477 buffer_time=2.208 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5016.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2704855 bytes_read=1458235 bytes_retransmit=9 bytes_invalid=0 send_seq=78151 receive_seq=78151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.031 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=710682 sysload=0.02 cputime=200.592 memavail=1629124 print_time=5027.866 buffer_time=2.597 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 5017.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2705528 bytes_read=1458658 bytes_retransmit=9 bytes_invalid=0 send_seq=78173 receive_seq=78173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=710746 sysload=0.02 cputime=200.653 memavail=1629176 print_time=5029.208 buffer_time=2.939 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 5018.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2706193 bytes_read=1459050 bytes_retransmit=9 bytes_invalid=0 send_seq=78194 receive_seq=78194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.110 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=710808 sysload=0.02 cputime=200.713 memavail=1629184 print_time=5030.541 buffer_time=3.272 print_stall=0 extruder: target=215 temp=214.9 pwm=0.473
Stats 5019.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2706418 bytes_read=1459389 bytes_retransmit=9 bytes_invalid=0 send_seq=78208 receive_seq=78208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=710808 sysload=0.02 cputime=200.772 memavail=1629176 print_time=5030.541 buffer_time=2.272 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 5020.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2707085 bytes_read=1459835 bytes_retransmit=9 bytes_invalid=0 send_seq=78229 receive_seq=78228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=710872 sysload=0.02 cputime=200.834 memavail=1629432 print_time=5031.851 buffer_time=2.581 print_stall=0 extruder: target=215 temp=215.2 pwm=0.379
Stats 5021.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2707646 bytes_read=1460222 bytes_retransmit=9 bytes_invalid=0 send_seq=78248 receive_seq=78248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=710933 sysload=0.02 cputime=200.896 memavail=1629448 print_time=5033.137 buffer_time=2.867 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 5022.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2708295 bytes_read=1460604 bytes_retransmit=9 bytes_invalid=0 send_seq=78267 receive_seq=78267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=711028 sysload=0.02 cputime=200.959 memavail=1629188 print_time=5034.400 buffer_time=3.127 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 5023.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2708584 bytes_read=1461005 bytes_retransmit=9 bytes_invalid=0 send_seq=78282 receive_seq=78281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.016 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=711028 sysload=0.02 cputime=201.007 memavail=1629432 print_time=5034.400 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 5024.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2709157 bytes_read=1461398 bytes_retransmit=9 bytes_invalid=0 send_seq=78300 receive_seq=78300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=711090 sysload=0.02 cputime=201.066 memavail=1629132 print_time=5035.635 buffer_time=2.360 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 5025.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2709737 bytes_read=1461790 bytes_retransmit=9 bytes_invalid=0 send_seq=78318 receive_seq=78318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=711153 sysload=0.02 cputime=201.128 memavail=1629444 print_time=5036.839 buffer_time=2.564 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 5026.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2710379 bytes_read=1462211 bytes_retransmit=9 bytes_invalid=0 send_seq=78337 receive_seq=78336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.395 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=711215 sysload=0.02 cputime=201.191 memavail=1629684 print_time=5038.009 buffer_time=2.732 print_stall=0 extruder: target=215 temp=215.1 pwm=0.398
Stats 5027.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2710969 bytes_read=1462598 bytes_retransmit=9 bytes_invalid=0 send_seq=78356 receive_seq=78356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.498 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=711278 sysload=0.02 cputime=201.233 memavail=1629192 print_time=5039.145 buffer_time=2.867 print_stall=0 extruder: target=215 temp=214.8 pwm=0.577
Stats 5028.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2711672 bytes_read=1463010 bytes_retransmit=9 bytes_invalid=0 send_seq=78379 receive_seq=78378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=711369 sysload=0.02 cputime=201.287 memavail=1629428 print_time=5040.268 buffer_time=2.990 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 5029.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2712250 bytes_read=1463421 bytes_retransmit=9 bytes_invalid=0 send_seq=78398 receive_seq=78397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=711431 sysload=0.02 cputime=201.349 memavail=1629252 print_time=5041.308 buffer_time=3.026 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 5030.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=2712418 bytes_read=1463788 bytes_retransmit=9 bytes_invalid=0 send_seq=78410 receive_seq=78410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=711431 sysload=0.01 cputime=201.393 memavail=1629488 print_time=5041.308 buffer_time=2.025 print_stall=0 extruder: target=215 temp=215.1 pwm=0.472
Stats 5031.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=2713052 bytes_read=1464190 bytes_retransmit=9 bytes_invalid=0 send_seq=78430 receive_seq=78430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.042 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=711495 sysload=0.01 cputime=201.453 memavail=1629060 print_time=5042.324 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.1 pwm=0.517
Stats 5032.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=2713651 bytes_read=1464611 bytes_retransmit=9 bytes_invalid=0 send_seq=78451 receive_seq=78451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.051 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=711558 sysload=0.01 cputime=201.517 memavail=1629560 print_time=5043.292 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.0 pwm=0.593
Stats 5033.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=2714634 bytes_read=1465023 bytes_retransmit=9 bytes_invalid=0 send_seq=78477 receive_seq=78476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.455 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=711717 sysload=0.01 cputime=201.584 memavail=1629328 print_time=5045.076 buffer_time=2.788 print_stall=0 extruder: target=215 temp=215.2 pwm=0.370
Stats 5034.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=2715199 bytes_read=1465425 bytes_retransmit=9 bytes_invalid=0 send_seq=78496 receive_seq=78496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.235 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=711779 sysload=0.01 cputime=201.631 memavail=1629312 print_time=5045.876 buffer_time=2.588 print_stall=0 extruder: target=215 temp=215.0 pwm=0.558
Stats 5035.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=2715830 bytes_read=1465831 bytes_retransmit=9 bytes_invalid=0 send_seq=78515 receive_seq=78514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.504 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=711874 sysload=0.01 cputime=201.691 memavail=1629580 print_time=5046.645 buffer_time=2.355 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 5036.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2716711 bytes_read=1466248 bytes_retransmit=9 bytes_invalid=0 send_seq=78538 receive_seq=78537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=712006 sysload=0.01 cputime=201.755 memavail=1629640 print_time=5047.844 buffer_time=2.553 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 5037.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2717411 bytes_read=1466665 bytes_retransmit=9 bytes_invalid=0 send_seq=78560 receive_seq=78560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=712237 sysload=0.01 cputime=201.818 memavail=1629600 print_time=5048.397 buffer_time=2.105 print_stall=0 extruder: target=215 temp=214.9 pwm=0.559
Stats 5038.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2718412 bytes_read=1467111 bytes_retransmit=9 bytes_invalid=0 send_seq=78586 receive_seq=78586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=712655 sysload=0.01 cputime=201.886 memavail=1629628 print_time=5049.337 buffer_time=2.042 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 5039.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2719077 bytes_read=1467488 bytes_retransmit=9 bytes_invalid=0 send_seq=78604 receive_seq=78604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=712995 sysload=0.01 cputime=201.952 memavail=1629612 print_time=5050.377 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.3 pwm=0.226
Stats 5040.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2719679 bytes_read=1467890 bytes_retransmit=9 bytes_invalid=0 send_seq=78621 receive_seq=78621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.8 pwm=0.974 rpi: temp=54.5 mcu_temp: temp=42.6 sd_pos=713294 sysload=0.01 cputime=202.020 memavail=1629884 print_time=5051.418 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 5041.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2720363 bytes_read=1468301 bytes_retransmit=9 bytes_invalid=0 send_seq=78641 receive_seq=78640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.8 pwm=0.804 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=713565 sysload=0.01 cputime=202.087 memavail=1629640 print_time=5052.295 buffer_time=1.997 print_stall=0 extruder: target=215 temp=215.2 pwm=0.284
Stats 5042.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2721028 bytes_read=1468693 bytes_retransmit=9 bytes_invalid=0 send_seq=78661 receive_seq=78661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=713972 sysload=0.01 cputime=202.156 memavail=1629672 print_time=5053.454 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.9 pwm=0.571
Stats 5043.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2722019 bytes_read=1469110 bytes_retransmit=9 bytes_invalid=0 send_seq=78685 receive_seq=78684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=714287 sysload=0.01 cputime=202.223 memavail=1629640 print_time=5054.439 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 5044.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2722629 bytes_read=1469526 bytes_retransmit=9 bytes_invalid=0 send_seq=78704 receive_seq=78704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=714632 sysload=0.01 cputime=202.292 memavail=1629884 print_time=5055.541 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.0 pwm=0.560
Stats 5045.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2723281 bytes_read=1469923 bytes_retransmit=9 bytes_invalid=0 send_seq=78723 receive_seq=78723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.571 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=714937 sysload=0.01 cputime=202.358 memavail=1629648 print_time=5056.608 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 5046.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2724015 bytes_read=1470320 bytes_retransmit=9 bytes_invalid=0 send_seq=78743 receive_seq=78742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=715244 sysload=0.01 cputime=202.425 memavail=1629384 print_time=5057.542 buffer_time=2.237 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 5047.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2724834 bytes_read=1470741 bytes_retransmit=9 bytes_invalid=0 send_seq=78764 receive_seq=78763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=715664 sysload=0.01 cputime=202.491 memavail=1629412 print_time=5058.544 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 5048.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2725420 bytes_read=1471128 bytes_retransmit=9 bytes_invalid=0 send_seq=78783 receive_seq=78783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=715883 sysload=0.01 cputime=202.555 memavail=1629032 print_time=5059.637 buffer_time=2.330 print_stall=0 extruder: target=215 temp=215.3 pwm=0.257
Stats 5049.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=2725967 bytes_read=1471535 bytes_retransmit=9 bytes_invalid=0 send_seq=78801 receive_seq=78801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.223 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=716130 sysload=0.01 cputime=202.620 memavail=1629020 print_time=5060.596 buffer_time=2.287 print_stall=0 extruder: target=215 temp=215.3 pwm=0.292
Stats 5050.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2726468 bytes_read=1471936 bytes_retransmit=9 bytes_invalid=0 send_seq=78819 receive_seq=78818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=716284 sysload=0.01 cputime=202.682 memavail=1628564 print_time=5061.325 buffer_time=2.015 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 5051.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2727067 bytes_read=1472313 bytes_retransmit=9 bytes_invalid=0 send_seq=78837 receive_seq=78836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.569 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=716492 sysload=0.01 cputime=202.747 memavail=1628456 print_time=5062.419 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.9 pwm=0.609
Stats 5052.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2727898 bytes_read=1472745 bytes_retransmit=9 bytes_invalid=0 send_seq=78859 receive_seq=78859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=716768 sysload=0.01 cputime=202.802 memavail=1628940 print_time=5063.512 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 5053.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2728436 bytes_read=1473141 bytes_retransmit=9 bytes_invalid=0 send_seq=78878 receive_seq=78878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=716923 sysload=0.01 cputime=202.849 memavail=1628408 print_time=5064.375 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.2 pwm=0.323
Stats 5054.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2729493 bytes_read=1473553 bytes_retransmit=9 bytes_invalid=0 send_seq=78903 receive_seq=78903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=717254 sysload=0.01 cputime=202.916 memavail=1628912 print_time=5065.540 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 5055.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=2730557 bytes_read=1474015 bytes_retransmit=9 bytes_invalid=0 send_seq=78930 receive_seq=78929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=717412 sysload=0.01 cputime=202.981 memavail=1628916 print_time=5066.789 buffer_time=2.471 print_stall=0 extruder: target=215 temp=215.2 pwm=0.402
Stats 5056.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=2731113 bytes_read=1474421 bytes_retransmit=9 bytes_invalid=0 send_seq=78950 receive_seq=78950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=717475 sysload=0.01 cputime=203.042 memavail=1628960 print_time=5067.509 buffer_time=2.190 print_stall=0 extruder: target=215 temp=215.0 pwm=0.535
Stats 5057.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=2732042 bytes_read=1474818 bytes_retransmit=9 bytes_invalid=0 send_seq=78973 receive_seq=78972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.100 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=717634 sysload=0.01 cputime=203.105 memavail=1629480 print_time=5069.192 buffer_time=2.872 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 5058.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=2732628 bytes_read=1475235 bytes_retransmit=9 bytes_invalid=0 send_seq=78993 receive_seq=78992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.461 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=717697 sysload=0.01 cputime=203.166 memavail=1629528 print_time=5070.098 buffer_time=2.775 print_stall=0 extruder: target=215 temp=214.9 pwm=0.615
Stats 5059.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000025 mcu_task_stddev=0.000067 bytes_write=2733233 bytes_read=1475641 bytes_retransmit=9 bytes_invalid=0 send_seq=79014 receive_seq=79013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=717761 sysload=0.01 cputime=203.227 memavail=1629796 print_time=5071.064 buffer_time=2.739 print_stall=0 extruder: target=215 temp=215.0 pwm=0.570
Stats 5060.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2733763 bytes_read=1476038 bytes_retransmit=9 bytes_invalid=0 send_seq=79032 receive_seq=79032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=717824 sysload=0.01 cputime=203.288 memavail=1630052 print_time=5072.079 buffer_time=2.753 print_stall=0 extruder: target=215 temp=215.0 pwm=0.604
Stats 5061.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2734449 bytes_read=1476443 bytes_retransmit=9 bytes_invalid=0 send_seq=79053 receive_seq=79052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=717916 sysload=0.01 cputime=203.350 memavail=1630288 print_time=5073.155 buffer_time=2.826 print_stall=0 extruder: target=215 temp=215.0 pwm=0.502
Stats 5062.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2735010 bytes_read=1476828 bytes_retransmit=9 bytes_invalid=0 send_seq=79071 receive_seq=79071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.423 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=717978 sysload=0.01 cputime=203.411 memavail=1630292 print_time=5074.242 buffer_time=2.913 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 5063.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2735660 bytes_read=1477210 bytes_retransmit=9 bytes_invalid=0 send_seq=79092 receive_seq=79092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=718042 sysload=0.01 cputime=203.471 memavail=1630048 print_time=5075.376 buffer_time=3.046 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 5064.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2735915 bytes_read=1477595 bytes_retransmit=9 bytes_invalid=0 send_seq=79107 receive_seq=79107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.492 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=718042 sysload=0.01 cputime=203.528 memavail=1630036 print_time=5075.376 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 5065.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2736567 bytes_read=1478016 bytes_retransmit=9 bytes_invalid=0 send_seq=79128 receive_seq=79128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.703 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=718104 sysload=0.01 cputime=203.590 memavail=1629992 print_time=5076.544 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.9 pwm=0.604
Stats 5066.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2737208 bytes_read=1478408 bytes_retransmit=9 bytes_invalid=0 send_seq=79149 receive_seq=79149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.715 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=718168 sysload=0.01 cputime=203.652 memavail=1629976 print_time=5077.746 buffer_time=2.410 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 5067.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2737854 bytes_read=1478835 bytes_retransmit=9 bytes_invalid=0 send_seq=79171 receive_seq=79171 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=718259 sysload=0.01 cputime=203.714 memavail=1629984 print_time=5078.988 buffer_time=2.652 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 5068.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2738523 bytes_read=1479236 bytes_retransmit=9 bytes_invalid=0 send_seq=79192 receive_seq=79191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.367 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=718323 sysload=0.01 cputime=203.774 memavail=1630004 print_time=5080.242 buffer_time=2.903 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5069.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2739075 bytes_read=1479623 bytes_retransmit=9 bytes_invalid=0 send_seq=79211 receive_seq=79211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=718354 sysload=0.01 cputime=203.832 memavail=1629988 print_time=5081.281 buffer_time=2.942 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 5070.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2739376 bytes_read=1480030 bytes_retransmit=9 bytes_invalid=0 send_seq=79226 receive_seq=79226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.206 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=718384 sysload=0.01 cputime=203.892 memavail=1629976 print_time=5081.525 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.1 pwm=0.356
Stats 5071.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2740130 bytes_read=1480456 bytes_retransmit=9 bytes_invalid=0 send_seq=79251 receive_seq=79251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.114 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=718447 sysload=0.01 cputime=203.955 memavail=1630016 print_time=5082.832 buffer_time=2.491 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 5072.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2740803 bytes_read=1480853 bytes_retransmit=9 bytes_invalid=0 send_seq=79273 receive_seq=79273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=718509 sysload=0.01 cputime=204.016 memavail=1630008 print_time=5084.163 buffer_time=2.818 print_stall=0 extruder: target=215 temp=215.1 pwm=0.371
Stats 5073.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2741444 bytes_read=1481275 bytes_retransmit=9 bytes_invalid=0 send_seq=79294 receive_seq=79294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=718604 sysload=0.01 cputime=204.060 memavail=1630304 print_time=5085.517 buffer_time=3.172 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 5074.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2741704 bytes_read=1481651 bytes_retransmit=9 bytes_invalid=0 send_seq=79309 receive_seq=79309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=718604 sysload=0.01 cputime=204.117 memavail=1629812 print_time=5085.517 buffer_time=2.169 print_stall=0 extruder: target=215 temp=214.9 pwm=0.594
Stats 5075.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2742430 bytes_read=1482063 bytes_retransmit=9 bytes_invalid=0 send_seq=79331 receive_seq=79331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.607 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=718665 sysload=0.00 cputime=204.178 memavail=1629824 print_time=5086.890 buffer_time=2.542 print_stall=0 extruder: target=215 temp=215.1 pwm=0.361
Stats 5076.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2743170 bytes_read=1482495 bytes_retransmit=9 bytes_invalid=0 send_seq=79355 receive_seq=79354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=718729 sysload=0.00 cputime=204.243 memavail=1629556 print_time=5088.278 buffer_time=2.926 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 5077.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2743794 bytes_read=1482906 bytes_retransmit=9 bytes_invalid=0 send_seq=79376 receive_seq=79376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=718790 sysload=0.00 cputime=204.302 memavail=1629568 print_time=5089.681 buffer_time=3.328 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 5078.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2744060 bytes_read=1483268 bytes_retransmit=9 bytes_invalid=0 send_seq=79391 receive_seq=79391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=718790 sysload=0.00 cputime=204.357 memavail=1629496 print_time=5089.681 buffer_time=2.327 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 5079.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2744713 bytes_read=1483690 bytes_retransmit=9 bytes_invalid=0 send_seq=79412 receive_seq=79412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.274 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=718854 sysload=0.00 cputime=204.416 memavail=1629184 print_time=5091.099 buffer_time=2.743 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 5080.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2745386 bytes_read=1484116 bytes_retransmit=9 bytes_invalid=0 send_seq=79434 receive_seq=79434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.701 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=718916 sysload=0.00 cputime=204.476 memavail=1628952 print_time=5092.531 buffer_time=3.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.439
Stats 5081.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2745660 bytes_read=1484478 bytes_retransmit=9 bytes_invalid=0 send_seq=79449 receive_seq=79449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=718916 sysload=0.00 cputime=204.530 memavail=1628876 print_time=5092.531 buffer_time=2.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 5082.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2746352 bytes_read=1484926 bytes_retransmit=9 bytes_invalid=0 send_seq=79473 receive_seq=79473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=719012 sysload=0.00 cputime=204.593 memavail=1628952 print_time=5093.979 buffer_time=2.619 print_stall=0 extruder: target=215 temp=215.1 pwm=0.372
Stats 5083.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2747021 bytes_read=1485332 bytes_retransmit=9 bytes_invalid=0 send_seq=79494 receive_seq=79494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=719073 sysload=0.00 cputime=204.652 memavail=1628884 print_time=5095.436 buffer_time=3.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.532
Stats 5084.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2747260 bytes_read=1485684 bytes_retransmit=9 bytes_invalid=0 send_seq=79507 receive_seq=79507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=54.5 mcu_temp: temp=42.4 sd_pos=719073 sysload=0.00 cputime=204.706 memavail=1628900 print_time=5095.436 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.8 pwm=0.478
Stats 5085.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2747980 bytes_read=1486140 bytes_retransmit=9 bytes_invalid=0 send_seq=79529 receive_seq=79529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=28 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=719136 sysload=0.00 cputime=204.768 memavail=1628968 print_time=5096.901 buffer_time=2.527 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 5086.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2748692 bytes_read=1486527 bytes_retransmit=9 bytes_invalid=0 send_seq=79550 receive_seq=79549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=719197 sysload=0.00 cputime=204.829 memavail=1629204 print_time=5098.373 buffer_time=2.997 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 5087.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2748892 bytes_read=1486884 bytes_retransmit=9 bytes_invalid=0 send_seq=79564 receive_seq=79563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=22 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=719197 sysload=0.00 cputime=204.883 memavail=1629452 print_time=5098.373 buffer_time=1.997 print_stall=0 extruder: target=215 temp=214.7 pwm=0.618
Stats 5088.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2749566 bytes_read=1487325 bytes_retransmit=9 bytes_invalid=0 send_seq=79585 receive_seq=79585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=719261 sysload=0.00 cputime=204.942 memavail=1629720 print_time=5099.852 buffer_time=2.476 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 5089.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2750267 bytes_read=1487722 bytes_retransmit=9 bytes_invalid=0 send_seq=79607 receive_seq=79607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.179 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=719323 sysload=0.00 cputime=204.999 memavail=1629204 print_time=5101.338 buffer_time=2.962 print_stall=0 extruder: target=215 temp=215.1 pwm=0.390
Stats 5090.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2750940 bytes_read=1488149 bytes_retransmit=9 bytes_invalid=0 send_seq=79629 receive_seq=79629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=719419 sysload=0.00 cputime=205.060 memavail=1629444 print_time=5102.832 buffer_time=3.451 print_stall=0 extruder: target=215 temp=214.8 pwm=0.541
Stats 5091.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2751180 bytes_read=1488540 bytes_retransmit=9 bytes_invalid=0 send_seq=79644 receive_seq=79644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=719419 sysload=0.00 cputime=205.101 memavail=1629704 print_time=5102.832 buffer_time=2.450 print_stall=0 extruder: target=215 temp=215.0 pwm=0.418
Stats 5092.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2751910 bytes_read=1488937 bytes_retransmit=9 bytes_invalid=0 send_seq=79666 receive_seq=79666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.484 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=719481 sysload=0.00 cputime=205.159 memavail=1629448 print_time=5104.329 buffer_time=2.947 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 5093.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2752460 bytes_read=1489329 bytes_retransmit=9 bytes_invalid=0 send_seq=79684 receive_seq=79684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=72 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=719544 sysload=0.00 cputime=205.217 memavail=1629456 print_time=5105.827 buffer_time=3.443 print_stall=0 extruder: target=215 temp=215.1 pwm=0.391
Stats 5094.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2752823 bytes_read=1489730 bytes_retransmit=9 bytes_invalid=0 send_seq=79701 receive_seq=79701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.092 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=719544 sysload=0.00 cputime=205.275 memavail=1629436 print_time=5105.827 buffer_time=2.443 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 5095.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2753453 bytes_read=1490122 bytes_retransmit=9 bytes_invalid=0 send_seq=79719 receive_seq=79719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=719605 sysload=0.00 cputime=205.331 memavail=1629184 print_time=5107.325 buffer_time=2.938 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 5096.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2754189 bytes_read=1490534 bytes_retransmit=9 bytes_invalid=0 send_seq=79741 receive_seq=79741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.502 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=719668 sysload=0.00 cputime=205.374 memavail=1629204 print_time=5108.823 buffer_time=3.435 print_stall=0 extruder: target=215 temp=215.1 pwm=0.367
Stats 5097.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2754422 bytes_read=1490925 bytes_retransmit=9 bytes_invalid=0 send_seq=79756 receive_seq=79756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=719668 sysload=0.00 cputime=205.427 memavail=1629196 print_time=5108.823 buffer_time=2.435 print_stall=0 extruder: target=215 temp=215.1 pwm=0.331
Stats 5098.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2755062 bytes_read=1491312 bytes_retransmit=9 bytes_invalid=0 send_seq=79776 receive_seq=79776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=719730 sysload=0.00 cputime=205.485 memavail=1628936 print_time=5110.321 buffer_time=2.931 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 5099.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2755765 bytes_read=1491714 bytes_retransmit=9 bytes_invalid=0 send_seq=79797 receive_seq=79796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.601 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=719825 sysload=0.00 cputime=205.542 memavail=1628936 print_time=5111.819 buffer_time=3.427 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 5100.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2756005 bytes_read=1492130 bytes_retransmit=9 bytes_invalid=0 send_seq=79813 receive_seq=79813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=719825 sysload=0.00 cputime=205.597 memavail=1628676 print_time=5111.819 buffer_time=2.426 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 5101.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2756679 bytes_read=1492517 bytes_retransmit=9 bytes_invalid=0 send_seq=79833 receive_seq=79833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.213 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=719887 sysload=0.00 cputime=205.654 memavail=1628948 print_time=5113.316 buffer_time=2.923 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 5102.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2757346 bytes_read=1492924 bytes_retransmit=9 bytes_invalid=0 send_seq=79854 receive_seq=79854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=719951 sysload=0.00 cputime=205.711 memavail=1628944 print_time=5114.806 buffer_time=3.413 print_stall=0 extruder: target=215 temp=214.8 pwm=0.587
Stats 5103.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2757639 bytes_read=1493310 bytes_retransmit=9 bytes_invalid=0 send_seq=79869 receive_seq=79868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=6 stalled_bytes=8 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=719951 sysload=0.00 cputime=205.753 memavail=1628960 print_time=5114.806 buffer_time=2.411 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 5104.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2758355 bytes_read=1493712 bytes_retransmit=9 bytes_invalid=0 send_seq=79891 receive_seq=79891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.253 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=720013 sysload=0.00 cputime=205.811 memavail=1628948 print_time=5116.290 buffer_time=2.893 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 5105.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2759081 bytes_read=1494134 bytes_retransmit=9 bytes_invalid=0 send_seq=79913 receive_seq=79912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=720076 sysload=0.00 cputime=205.854 memavail=1628464 print_time=5117.765 buffer_time=3.368 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 5106.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2759292 bytes_read=1494525 bytes_retransmit=9 bytes_invalid=0 send_seq=79927 receive_seq=79927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.411 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=720076 sysload=0.00 cputime=205.908 memavail=1628696 print_time=5117.765 buffer_time=2.366 print_stall=0 extruder: target=215 temp=215.2 pwm=0.350
Stats 5107.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2759978 bytes_read=1494917 bytes_retransmit=9 bytes_invalid=0 send_seq=79948 receive_seq=79948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=720169 sysload=0.00 cputime=205.968 memavail=1628448 print_time=5119.234 buffer_time=2.834 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 5108.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2760617 bytes_read=1495314 bytes_retransmit=9 bytes_invalid=0 send_seq=79967 receive_seq=79967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.480 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=720232 sysload=0.00 cputime=206.026 memavail=1628464 print_time=5120.696 buffer_time=3.295 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 5109.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2760900 bytes_read=1495705 bytes_retransmit=9 bytes_invalid=0 send_seq=79982 receive_seq=79982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.493 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=720232 sysload=0.00 cputime=206.081 memavail=1628464 print_time=5120.696 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 5110.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2761554 bytes_read=1496107 bytes_retransmit=9 bytes_invalid=0 send_seq=80002 receive_seq=80002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=720324 sysload=0.08 cputime=206.142 memavail=1628700 print_time=5122.155 buffer_time=2.751 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 5111.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2762188 bytes_read=1496509 bytes_retransmit=9 bytes_invalid=0 send_seq=80022 receive_seq=80022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.030 rpi: temp=55.5 mcu_temp: temp=41.0 sd_pos=720387 sysload=0.08 cputime=206.184 memavail=1628940 print_time=5123.591 buffer_time=3.186 print_stall=0 extruder: target=215 temp=215.1 pwm=0.386
Stats 5112.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2762441 bytes_read=1496890 bytes_retransmit=9 bytes_invalid=0 send_seq=80035 receive_seq=80035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=720387 sysload=0.08 cputime=206.237 memavail=1628716 print_time=5123.591 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.1 pwm=0.360
Stats 5113.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2763119 bytes_read=1497282 bytes_retransmit=9 bytes_invalid=0 send_seq=80056 receive_seq=80056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=720448 sysload=0.08 cputime=206.278 memavail=1628972 print_time=5125.017 buffer_time=2.610 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 5114.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2763816 bytes_read=1497684 bytes_retransmit=9 bytes_invalid=0 send_seq=80077 receive_seq=80076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=720512 sysload=0.08 cputime=206.334 memavail=1628916 print_time=5126.427 buffer_time=3.020 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 5115.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2764035 bytes_read=1498090 bytes_retransmit=9 bytes_invalid=0 send_seq=80091 receive_seq=80091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=720512 sysload=0.16 cputime=206.373 memavail=1628432 print_time=5126.427 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 5116.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2764721 bytes_read=1498487 bytes_retransmit=9 bytes_invalid=0 send_seq=80113 receive_seq=80113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=720571 sysload=0.16 cputime=206.428 memavail=1628692 print_time=5127.824 buffer_time=2.413 print_stall=0 extruder: target=215 temp=214.9 pwm=0.550
Stats 5117.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2765397 bytes_read=1498904 bytes_retransmit=9 bytes_invalid=0 send_seq=80133 receive_seq=80133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=720665 sysload=0.16 cputime=206.485 memavail=1628676 print_time=5129.205 buffer_time=2.793 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 5118.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2766034 bytes_read=1499300 bytes_retransmit=9 bytes_invalid=0 send_seq=80152 receive_seq=80152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=720726 sysload=0.16 cputime=206.527 memavail=1628472 print_time=5130.575 buffer_time=3.162 print_stall=0 extruder: target=215 temp=215.3 pwm=0.254
Stats 5119.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2766313 bytes_read=1499662 bytes_retransmit=9 bytes_invalid=0 send_seq=80167 receive_seq=80167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=720726 sysload=0.16 cputime=206.582 memavail=1628492 print_time=5130.575 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.510
Stats 5120.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2767002 bytes_read=1500094 bytes_retransmit=9 bytes_invalid=0 send_seq=80188 receive_seq=80188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.110 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=720790 sysload=0.14 cputime=206.641 memavail=1628224 print_time=5131.918 buffer_time=2.502 print_stall=0 extruder: target=215 temp=215.0 pwm=0.558
Stats 5121.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2767684 bytes_read=1500489 bytes_retransmit=9 bytes_invalid=0 send_seq=80209 receive_seq=80209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=720851 sysload=0.14 cputime=206.698 memavail=1628464 print_time=5133.238 buffer_time=2.821 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 5122.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2768346 bytes_read=1500866 bytes_retransmit=9 bytes_invalid=0 send_seq=80229 receive_seq=80229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=720915 sysload=0.14 cputime=206.754 memavail=1628248 print_time=5134.535 buffer_time=3.118 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 5123.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2768584 bytes_read=1501246 bytes_retransmit=9 bytes_invalid=0 send_seq=80244 receive_seq=80244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=720915 sysload=0.14 cputime=206.793 memavail=1628556 print_time=5134.535 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.0 pwm=0.420
Stats 5124.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000041 bytes_write=2769207 bytes_read=1501650 bytes_retransmit=9 bytes_invalid=0 send_seq=80265 receive_seq=80265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=720946 sysload=0.14 cputime=206.849 memavail=1628800 print_time=5135.571 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.1 pwm=0.372
Stats 5125.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2769925 bytes_read=1502057 bytes_retransmit=9 bytes_invalid=0 send_seq=80286 receive_seq=80286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=721072 sysload=0.13 cputime=206.908 memavail=1628672 print_time=5137.072 buffer_time=2.651 print_stall=0 extruder: target=215 temp=214.8 pwm=0.592
Stats 5126.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2770598 bytes_read=1502479 bytes_retransmit=9 bytes_invalid=0 send_seq=80308 receive_seq=80307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=721132 sysload=0.13 cputime=206.968 memavail=1628440 print_time=5138.277 buffer_time=2.854 print_stall=0 extruder: target=215 temp=215.0 pwm=0.423
Stats 5127.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2771176 bytes_read=1502885 bytes_retransmit=9 bytes_invalid=0 send_seq=80328 receive_seq=80328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=721195 sysload=0.13 cputime=207.024 memavail=1629132 print_time=5139.463 buffer_time=3.039 print_stall=0 extruder: target=215 temp=214.9 pwm=0.572
Stats 5128.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2771440 bytes_read=1503247 bytes_retransmit=9 bytes_invalid=0 send_seq=80343 receive_seq=80343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=721195 sysload=0.13 cputime=207.078 memavail=1628868 print_time=5139.463 buffer_time=2.035 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 5129.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2772072 bytes_read=1503664 bytes_retransmit=9 bytes_invalid=0 send_seq=80363 receive_seq=80363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.029 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=721257 sysload=0.13 cputime=207.135 memavail=1629076 print_time=5140.616 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 5130.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2772711 bytes_read=1504085 bytes_retransmit=9 bytes_invalid=0 send_seq=80384 receive_seq=80384 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=721321 sysload=0.12 cputime=207.197 memavail=1629056 print_time=5141.734 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 5131.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2773341 bytes_read=1504472 bytes_retransmit=9 bytes_invalid=0 send_seq=80404 receive_seq=80404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=721410 sysload=0.12 cputime=207.255 memavail=1629056 print_time=5142.829 buffer_time=2.392 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 5132.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2773950 bytes_read=1504894 bytes_retransmit=9 bytes_invalid=0 send_seq=80425 receive_seq=80425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.121 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=721472 sysload=0.12 cputime=207.317 memavail=1628824 print_time=5143.859 buffer_time=2.421 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 5133.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2774561 bytes_read=1505300 bytes_retransmit=9 bytes_invalid=0 send_seq=80446 receive_seq=80446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.627 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=721534 sysload=0.12 cputime=207.374 memavail=1629060 print_time=5144.852 buffer_time=2.413 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 5134.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2775158 bytes_read=1505692 bytes_retransmit=9 bytes_invalid=0 send_seq=80467 receive_seq=80467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.8 pwm=0.847 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=721595 sysload=0.12 cputime=207.428 memavail=1629056 print_time=5145.796 buffer_time=2.357 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 5135.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2775731 bytes_read=1506124 bytes_retransmit=9 bytes_invalid=0 send_seq=80487 receive_seq=80487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=721687 sysload=0.11 cputime=207.470 memavail=1629304 print_time=5146.705 buffer_time=2.262 print_stall=0 extruder: target=215 temp=215.3 pwm=0.361
Stats 5136.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2776301 bytes_read=1506525 bytes_retransmit=9 bytes_invalid=0 send_seq=80507 receive_seq=80507 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=721749 sysload=0.11 cputime=207.526 memavail=1629304 print_time=5147.528 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 5137.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2777229 bytes_read=1506932 bytes_retransmit=9 bytes_invalid=0 send_seq=80532 receive_seq=80531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=721904 sysload=0.11 cputime=207.585 memavail=1629556 print_time=5149.013 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 5138.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2777813 bytes_read=1507354 bytes_retransmit=9 bytes_invalid=0 send_seq=80552 receive_seq=80552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.350 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=721966 sysload=0.11 cputime=207.643 memavail=1629824 print_time=5149.604 buffer_time=2.157 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 5139.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2778777 bytes_read=1507785 bytes_retransmit=9 bytes_invalid=0 send_seq=80580 receive_seq=80578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.685 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=722098 sysload=0.11 cputime=207.707 memavail=1629808 print_time=5150.557 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.9 pwm=0.644
Stats 5140.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2780203 bytes_read=1508278 bytes_retransmit=9 bytes_invalid=0 send_seq=80614 receive_seq=80614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996391 heater_bed: target=55 temp=54.9 pwm=0.345 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=722621 sysload=0.10 cputime=207.774 memavail=1629824 print_time=5151.604 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.9 pwm=0.552
Stats 5141.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2780915 bytes_read=1508700 bytes_retransmit=9 bytes_invalid=0 send_seq=80635 receive_seq=80635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.111 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=722989 sysload=0.10 cputime=207.840 memavail=1629828 print_time=5152.706 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.1 pwm=0.498
Stats 5142.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2781444 bytes_read=1509091 bytes_retransmit=9 bytes_invalid=0 send_seq=80653 receive_seq=80653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=723232 sysload=0.10 cputime=207.883 memavail=1630324 print_time=5153.484 buffer_time=2.026 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 5143.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2782150 bytes_read=1509483 bytes_retransmit=9 bytes_invalid=0 send_seq=80674 receive_seq=80674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=723572 sysload=0.10 cputime=207.929 memavail=1630584 print_time=5154.521 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 5144.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000049 bytes_write=2783003 bytes_read=1509910 bytes_retransmit=9 bytes_invalid=0 send_seq=80696 receive_seq=80696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996396 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.3 sd_pos=724113 sysload=0.10 cputime=208.003 memavail=1630840 print_time=5155.896 buffer_time=2.437 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 5145.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2783726 bytes_read=1510326 bytes_retransmit=9 bytes_invalid=0 send_seq=80716 receive_seq=80716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=724362 sysload=0.09 cputime=208.046 memavail=1630820 print_time=5156.521 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 5146.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2784286 bytes_read=1510698 bytes_retransmit=9 bytes_invalid=0 send_seq=80733 receive_seq=80733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=724668 sysload=0.09 cputime=208.108 memavail=1630836 print_time=5157.453 buffer_time=1.993 print_stall=0 extruder: target=215 temp=215.2 pwm=0.439
Stats 5147.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2785030 bytes_read=1511115 bytes_retransmit=9 bytes_invalid=0 send_seq=80754 receive_seq=80753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996402 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=724999 sysload=0.09 cputime=208.175 memavail=1630568 print_time=5158.517 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 5148.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2785629 bytes_read=1511511 bytes_retransmit=9 bytes_invalid=0 send_seq=80772 receive_seq=80772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.479 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=725339 sysload=0.09 cputime=208.238 memavail=1630536 print_time=5159.515 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 5149.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2786381 bytes_read=1511893 bytes_retransmit=9 bytes_invalid=0 send_seq=80791 receive_seq=80791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=725821 sysload=0.09 cputime=208.303 memavail=1630832 print_time=5160.723 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.3 pwm=0.283
Stats 5150.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2787184 bytes_read=1512330 bytes_retransmit=9 bytes_invalid=0 send_seq=80812 receive_seq=80812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.576 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=726101 sysload=0.09 cputime=208.367 memavail=1630568 print_time=5161.747 buffer_time=2.281 print_stall=0 extruder: target=215 temp=215.1 pwm=0.477
Stats 5151.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2787790 bytes_read=1512721 bytes_retransmit=9 bytes_invalid=0 send_seq=80831 receive_seq=80830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=726349 sysload=0.09 cputime=208.430 memavail=1630040 print_time=5162.747 buffer_time=2.279 print_stall=0 extruder: target=215 temp=214.8 pwm=0.563
Stats 5152.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2788280 bytes_read=1513103 bytes_retransmit=9 bytes_invalid=0 send_seq=80849 receive_seq=80849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996400 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=726527 sysload=0.09 cputime=208.492 memavail=1629832 print_time=5163.564 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.1 pwm=0.417
Stats 5153.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2788858 bytes_read=1513534 bytes_retransmit=9 bytes_invalid=0 send_seq=80869 receive_seq=80869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=726775 sysload=0.09 cputime=208.536 memavail=1629084 print_time=5164.473 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.0 pwm=0.522
Stats 5154.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2789381 bytes_read=1513906 bytes_retransmit=9 bytes_invalid=0 send_seq=80886 receive_seq=80886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=726990 sysload=0.09 cputime=208.595 memavail=1629344 print_time=5165.473 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 5155.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2790114 bytes_read=1514298 bytes_retransmit=9 bytes_invalid=0 send_seq=80906 receive_seq=80904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996394 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=727334 sysload=0.08 cputime=208.658 memavail=1629360 print_time=5166.835 buffer_time=2.361 print_stall=0 extruder: target=215 temp=214.9 pwm=0.472
Stats 5156.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2791191 bytes_read=1514769 bytes_retransmit=9 bytes_invalid=0 send_seq=80932 receive_seq=80932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996397 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=727662 sysload=0.08 cputime=208.727 memavail=1629344 print_time=5168.063 buffer_time=2.588 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 5157.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2791780 bytes_read=1515151 bytes_retransmit=9 bytes_invalid=0 send_seq=80952 receive_seq=80951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996401 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=727758 sysload=0.08 cputime=208.786 memavail=1629612 print_time=5168.742 buffer_time=2.268 print_stall=0 extruder: target=215 temp=214.9 pwm=0.455
Stats 5158.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2792652 bytes_read=1515568 bytes_retransmit=9 bytes_invalid=0 send_seq=80977 receive_seq=80977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996398 heater_bed: target=55 temp=54.9 pwm=0.476 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=727886 sysload=0.08 cputime=208.851 memavail=1629596 print_time=5170.259 buffer_time=2.783 print_stall=0 extruder: target=215 temp=214.8 pwm=0.550
Stats 5159.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=2793301 bytes_read=1515999 bytes_retransmit=9 bytes_invalid=0 send_seq=80998 receive_seq=80997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996392 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=727981 sysload=0.08 cputime=208.896 memavail=1629856 print_time=5171.141 buffer_time=2.664 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 5160.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=2793879 bytes_read=1516401 bytes_retransmit=9 bytes_invalid=0 send_seq=81018 receive_seq=81017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996389 heater_bed: target=55 temp=54.9 pwm=0.443 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=728044 sysload=0.07 cputime=208.956 memavail=1629848 print_time=5172.046 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.0 pwm=0.412
Stats 5161.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=2794454 bytes_read=1516808 bytes_retransmit=9 bytes_invalid=0 send_seq=81039 receive_seq=81038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=728108 sysload=0.07 cputime=209.017 memavail=1629852 print_time=5173.011 buffer_time=2.531 print_stall=0 extruder: target=215 temp=215.1 pwm=0.341
Stats 5162.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=2795026 bytes_read=1517224 bytes_retransmit=9 bytes_invalid=0 send_seq=81059 receive_seq=81058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=728172 sysload=0.07 cputime=209.056 memavail=1629604 print_time=5174.025 buffer_time=2.544 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 5163.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=2795609 bytes_read=1517611 bytes_retransmit=9 bytes_invalid=0 send_seq=81078 receive_seq=81078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=728264 sysload=0.07 cputime=209.113 memavail=1629856 print_time=5175.098 buffer_time=2.618 print_stall=0 extruder: target=215 temp=214.8 pwm=0.621
Stats 5164.7: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=2796276 bytes_read=1518008 bytes_retransmit=9 bytes_invalid=0 send_seq=81098 receive_seq=81097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=728327 sysload=0.07 cputime=209.153 memavail=1629816 print_time=5176.184 buffer_time=2.703 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 5165.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000049 bytes_write=2796924 bytes_read=1518444 bytes_retransmit=9 bytes_invalid=0 send_seq=81119 receive_seq=81118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=728387 sysload=0.07 cputime=209.212 memavail=1629828 print_time=5177.316 buffer_time=2.834 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 5166.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000049 bytes_write=2797544 bytes_read=1518826 bytes_retransmit=9 bytes_invalid=0 send_seq=81138 receive_seq=81137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=728450 sysload=0.07 cputime=209.271 memavail=1629544 print_time=5178.482 buffer_time=2.998 print_stall=0 extruder: target=215 temp=215.2 pwm=0.386
Stats 5167.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000049 bytes_write=2798145 bytes_read=1519238 bytes_retransmit=9 bytes_invalid=0 send_seq=81159 receive_seq=81159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.079 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=728512 sysload=0.07 cputime=209.314 memavail=1629552 print_time=5179.682 buffer_time=3.195 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5168.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000049 bytes_write=2798432 bytes_read=1519634 bytes_retransmit=9 bytes_invalid=0 send_seq=81175 receive_seq=81175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.070 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=728512 sysload=0.07 cputime=209.370 memavail=1629544 print_time=5179.682 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 5169.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000049 bytes_write=2799057 bytes_read=1520016 bytes_retransmit=9 bytes_invalid=0 send_seq=81194 receive_seq=81194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.8 pwm=0.838 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=728608 sysload=0.07 cputime=209.429 memavail=1629284 print_time=5180.922 buffer_time=2.433 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 5170.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2799756 bytes_read=1520443 bytes_retransmit=9 bytes_invalid=0 send_seq=81216 receive_seq=81216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.427 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=728670 sysload=0.06 cputime=209.485 memavail=1629048 print_time=5182.174 buffer_time=2.685 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 5171.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2800418 bytes_read=1520864 bytes_retransmit=9 bytes_invalid=0 send_seq=81237 receive_seq=81237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=728733 sysload=0.06 cputime=209.543 memavail=1629044 print_time=5183.455 buffer_time=2.965 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 5172.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2801062 bytes_read=1521256 bytes_retransmit=9 bytes_invalid=0 send_seq=81258 receive_seq=81258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.2 sd_pos=728794 sysload=0.06 cputime=209.604 memavail=1628776 print_time=5184.760 buffer_time=3.267 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 5173.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2801273 bytes_read=1521623 bytes_retransmit=9 bytes_invalid=0 send_seq=81271 receive_seq=81271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.414 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=728794 sysload=0.06 cputime=209.647 memavail=1628856 print_time=5184.760 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 5174.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=2801930 bytes_read=1522044 bytes_retransmit=9 bytes_invalid=0 send_seq=81292 receive_seq=81292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=728857 sysload=0.06 cputime=209.707 memavail=1629104 print_time=5186.088 buffer_time=2.593 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 5175.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2802550 bytes_read=1522441 bytes_retransmit=9 bytes_invalid=0 send_seq=81311 receive_seq=81311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.811 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=728947 sysload=0.06 cputime=209.745 memavail=1629128 print_time=5187.440 buffer_time=2.944 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 5176.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2803251 bytes_read=1522853 bytes_retransmit=9 bytes_invalid=0 send_seq=81333 receive_seq=81333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=729010 sysload=0.06 cputime=209.806 memavail=1629104 print_time=5188.810 buffer_time=3.310 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 5177.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2803468 bytes_read=1523239 bytes_retransmit=9 bytes_invalid=0 send_seq=81347 receive_seq=81347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=729010 sysload=0.06 cputime=209.847 memavail=1629120 print_time=5188.810 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 5178.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2804138 bytes_read=1523631 bytes_retransmit=9 bytes_invalid=0 send_seq=81368 receive_seq=81368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.620 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=729072 sysload=0.06 cputime=209.888 memavail=1629104 print_time=5190.195 buffer_time=2.693 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 5179.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2804790 bytes_read=1524033 bytes_retransmit=9 bytes_invalid=0 send_seq=81388 receive_seq=81388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=57.0 mcu_temp: temp=41.4 sd_pos=729135 sysload=0.06 cputime=209.947 memavail=1629368 print_time=5191.595 buffer_time=3.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.360
Stats 5180.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2805087 bytes_read=1524428 bytes_retransmit=9 bytes_invalid=0 send_seq=81403 receive_seq=81403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.380 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=729135 sysload=0.13 cputime=210.005 memavail=1629104 print_time=5191.595 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 5181.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2805725 bytes_read=1524800 bytes_retransmit=9 bytes_invalid=0 send_seq=81422 receive_seq=81422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=729196 sysload=0.13 cputime=210.047 memavail=1629116 print_time=5193.010 buffer_time=2.497 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 5182.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2806368 bytes_read=1525210 bytes_retransmit=9 bytes_invalid=0 send_seq=81443 receive_seq=81443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.442 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=729260 sysload=0.13 cputime=210.090 memavail=1629616 print_time=5194.439 buffer_time=2.923 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 5183.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2807002 bytes_read=1525603 bytes_retransmit=9 bytes_invalid=0 send_seq=81463 receive_seq=81463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.074 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=729352 sysload=0.13 cputime=210.132 memavail=1629672 print_time=5195.896 buffer_time=3.379 print_stall=0 extruder: target=215 temp=214.8 pwm=0.546
Stats 5184.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2807225 bytes_read=1525955 bytes_retransmit=9 bytes_invalid=0 send_seq=81476 receive_seq=81476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=57.0 mcu_temp: temp=41.8 sd_pos=729352 sysload=0.13 cputime=210.182 memavail=1629668 print_time=5195.896 buffer_time=2.378 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 5185.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2807854 bytes_read=1526377 bytes_retransmit=9 bytes_invalid=0 send_seq=81494 receive_seq=81494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=729415 sysload=0.12 cputime=210.237 memavail=1629672 print_time=5197.337 buffer_time=2.819 print_stall=0 extruder: target=215 temp=215.0 pwm=0.498
Stats 5186.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2808508 bytes_read=1526788 bytes_retransmit=9 bytes_invalid=0 send_seq=81516 receive_seq=81516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.108 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=729477 sysload=0.12 cputime=210.295 memavail=1629688 print_time=5198.799 buffer_time=3.280 print_stall=0 extruder: target=215 temp=214.9 pwm=0.454
Stats 5187.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2808778 bytes_read=1527145 bytes_retransmit=9 bytes_invalid=0 send_seq=81530 receive_seq=81530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.384 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=729477 sysload=0.12 cputime=210.335 memavail=1629672 print_time=5198.799 buffer_time=2.279 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 5188.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2809492 bytes_read=1527577 bytes_retransmit=9 bytes_invalid=0 send_seq=81553 receive_seq=81553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=729541 sysload=0.12 cputime=210.394 memavail=1629940 print_time=5200.267 buffer_time=2.748 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 5189.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2810093 bytes_read=1527973 bytes_retransmit=9 bytes_invalid=0 send_seq=81572 receive_seq=81572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.288 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=729602 sysload=0.12 cputime=210.434 memavail=1629920 print_time=5201.743 buffer_time=3.223 print_stall=0 extruder: target=215 temp=214.9 pwm=0.450
Stats 5190.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2810383 bytes_read=1528340 bytes_retransmit=9 bytes_invalid=0 send_seq=81588 receive_seq=81588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.330 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=729602 sysload=0.11 cputime=210.485 memavail=1630412 print_time=5201.743 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 5191.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2811093 bytes_read=1528787 bytes_retransmit=9 bytes_invalid=0 send_seq=81611 receive_seq=81611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=729665 sysload=0.11 cputime=210.544 memavail=1629936 print_time=5203.226 buffer_time=2.704 print_stall=0 extruder: target=215 temp=214.8 pwm=0.560
Stats 5192.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2811719 bytes_read=1529198 bytes_retransmit=9 bytes_invalid=0 send_seq=81633 receive_seq=81633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.007 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=729758 sysload=0.11 cputime=210.597 memavail=1629724 print_time=5204.716 buffer_time=3.193 print_stall=0 extruder: target=215 temp=214.9 pwm=0.550
Stats 5193.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2811998 bytes_read=1529565 bytes_retransmit=9 bytes_invalid=0 send_seq=81649 receive_seq=81649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=729758 sysload=0.11 cputime=210.640 memavail=1629548 print_time=5204.716 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.1 pwm=0.366
Stats 5194.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2812696 bytes_read=1529987 bytes_retransmit=9 bytes_invalid=0 send_seq=81670 receive_seq=81670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=729822 sysload=0.11 cputime=210.694 memavail=1629300 print_time=5206.209 buffer_time=2.685 print_stall=0 extruder: target=215 temp=215.0 pwm=0.424
Stats 5195.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2813300 bytes_read=1530388 bytes_retransmit=9 bytes_invalid=0 send_seq=81690 receive_seq=81690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.583 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=729883 sysload=0.10 cputime=210.746 memavail=1629284 print_time=5207.703 buffer_time=3.178 print_stall=0 extruder: target=215 temp=215.0 pwm=0.424
Stats 5196.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2813544 bytes_read=1530760 bytes_retransmit=9 bytes_invalid=0 send_seq=81704 receive_seq=81704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.054 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=729883 sysload=0.10 cputime=210.795 memavail=1629280 print_time=5207.703 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 5197.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2814198 bytes_read=1531182 bytes_retransmit=9 bytes_invalid=0 send_seq=81725 receive_seq=81725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.368 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=729945 sysload=0.10 cputime=210.848 memavail=1629300 print_time=5209.196 buffer_time=2.670 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 5198.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2814875 bytes_read=1531614 bytes_retransmit=9 bytes_invalid=0 send_seq=81749 receive_seq=81749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=730006 sysload=0.10 cputime=210.907 memavail=1629792 print_time=5210.690 buffer_time=3.163 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 5199.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2815155 bytes_read=1531981 bytes_retransmit=9 bytes_invalid=0 send_seq=81765 receive_seq=81765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.8 pwm=0.828 rpi: temp=55.0 mcu_temp: temp=40.2 sd_pos=730006 sysload=0.10 cputime=210.961 memavail=1629756 print_time=5210.690 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 5200.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2815821 bytes_read=1532398 bytes_retransmit=9 bytes_invalid=0 send_seq=81785 receive_seq=81785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=730070 sysload=0.09 cputime=210.999 memavail=1629480 print_time=5212.184 buffer_time=2.656 print_stall=0 extruder: target=215 temp=215.1 pwm=0.370
Stats 5201.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2816437 bytes_read=1532814 bytes_retransmit=9 bytes_invalid=0 send_seq=81805 receive_seq=81805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=730163 sysload=0.09 cputime=211.032 memavail=1629736 print_time=5213.678 buffer_time=3.149 print_stall=0 extruder: target=215 temp=214.8 pwm=0.570
Stats 5202.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2816687 bytes_read=1533176 bytes_retransmit=9 bytes_invalid=0 send_seq=81820 receive_seq=81820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=730163 sysload=0.09 cputime=211.083 memavail=1629784 print_time=5213.678 buffer_time=2.148 print_stall=0 extruder: target=215 temp=215.2 pwm=0.418
Stats 5203.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2817373 bytes_read=1533603 bytes_retransmit=9 bytes_invalid=0 send_seq=81842 receive_seq=81842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.554 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=730227 sysload=0.09 cputime=211.121 memavail=1629456 print_time=5215.170 buffer_time=2.640 print_stall=0 extruder: target=215 temp=215.5 pwm=0.178
Stats 5204.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2818006 bytes_read=1534014 bytes_retransmit=9 bytes_invalid=0 send_seq=81864 receive_seq=81864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=730289 sysload=0.09 cputime=211.180 memavail=1629744 print_time=5216.655 buffer_time=3.124 print_stall=0 extruder: target=215 temp=215.2 pwm=0.386
Stats 5205.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2818280 bytes_read=1534376 bytes_retransmit=9 bytes_invalid=0 send_seq=81879 receive_seq=81879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=730289 sysload=0.09 cputime=211.233 memavail=1629244 print_time=5216.655 buffer_time=2.123 print_stall=0 extruder: target=215 temp=215.3 pwm=0.357
Stats 5206.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2819012 bytes_read=1534833 bytes_retransmit=9 bytes_invalid=0 send_seq=81904 receive_seq=81904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=730384 sysload=0.09 cputime=211.272 memavail=1628916 print_time=5218.133 buffer_time=2.601 print_stall=0 extruder: target=215 temp=215.0 pwm=0.584
Stats 5207.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2819618 bytes_read=1535229 bytes_retransmit=9 bytes_invalid=0 send_seq=81923 receive_seq=81923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=730444 sysload=0.09 cputime=211.331 memavail=1628916 print_time=5219.604 buffer_time=3.071 print_stall=0 extruder: target=215 temp=215.1 pwm=0.487
Stats 5208.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2819892 bytes_read=1535591 bytes_retransmit=9 bytes_invalid=0 send_seq=81938 receive_seq=81938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.2 pwm=0.032 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=730444 sysload=0.09 cputime=211.385 memavail=1628932 print_time=5219.604 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.0 pwm=0.514
Stats 5209.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2820549 bytes_read=1536013 bytes_retransmit=9 bytes_invalid=0 send_seq=81959 receive_seq=81959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=730507 sysload=0.09 cputime=211.441 memavail=1628920 print_time=5221.068 buffer_time=2.533 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 5210.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=2821226 bytes_read=1536419 bytes_retransmit=9 bytes_invalid=0 send_seq=81980 receive_seq=81980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=730600 sysload=0.16 cputime=211.499 memavail=1628920 print_time=5222.524 buffer_time=2.989 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 5211.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2821849 bytes_read=1536821 bytes_retransmit=9 bytes_invalid=0 send_seq=82000 receive_seq=82000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=730663 sysload=0.16 cputime=211.538 memavail=1628924 print_time=5223.976 buffer_time=3.439 print_stall=0 extruder: target=215 temp=215.2 pwm=0.391
Stats 5212.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2822140 bytes_read=1537213 bytes_retransmit=9 bytes_invalid=0 send_seq=82015 receive_seq=82015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.558 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=730663 sysload=0.16 cputime=211.591 memavail=1629172 print_time=5223.976 buffer_time=2.438 print_stall=0 extruder: target=215 temp=214.9 pwm=0.587
Stats 5213.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2822846 bytes_read=1537629 bytes_retransmit=9 bytes_invalid=0 send_seq=82038 receive_seq=82038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.116 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=730725 sysload=0.16 cputime=211.632 memavail=1629272 print_time=5225.410 buffer_time=2.872 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 5214.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2823414 bytes_read=1538011 bytes_retransmit=9 bytes_invalid=0 send_seq=82057 receive_seq=82057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=730788 sysload=0.16 cputime=211.686 memavail=1629028 print_time=5226.830 buffer_time=3.291 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 5215.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2823759 bytes_read=1538413 bytes_retransmit=9 bytes_invalid=0 send_seq=82074 receive_seq=82074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.529 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=730788 sysload=0.15 cputime=211.738 memavail=1629216 print_time=5226.830 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 5216.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2824458 bytes_read=1538839 bytes_retransmit=9 bytes_invalid=0 send_seq=82096 receive_seq=82096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=730850 sysload=0.15 cputime=211.795 memavail=1629004 print_time=5228.235 buffer_time=2.694 print_stall=0 extruder: target=215 temp=215.2 pwm=0.427
Stats 5217.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2825070 bytes_read=1539226 bytes_retransmit=9 bytes_invalid=0 send_seq=82116 receive_seq=82116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=730914 sysload=0.15 cputime=211.848 memavail=1628768 print_time=5229.625 buffer_time=3.083 print_stall=0 extruder: target=215 temp=214.9 pwm=0.583
Stats 5218.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2825367 bytes_read=1539623 bytes_retransmit=9 bytes_invalid=0 send_seq=82132 receive_seq=82132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.084 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=730914 sysload=0.15 cputime=211.899 memavail=1629192 print_time=5229.625 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 5219.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2826021 bytes_read=1540024 bytes_retransmit=9 bytes_invalid=0 send_seq=82152 receive_seq=82152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=731006 sysload=0.15 cputime=211.952 memavail=1628608 print_time=5231.000 buffer_time=2.457 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 5220.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=2826638 bytes_read=1540411 bytes_retransmit=9 bytes_invalid=0 send_seq=82172 receive_seq=82172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=731068 sysload=0.13 cputime=212.006 memavail=1628692 print_time=5232.358 buffer_time=2.815 print_stall=0 extruder: target=215 temp=215.2 pwm=0.446
Stats 5221.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2827257 bytes_read=1540843 bytes_retransmit=9 bytes_invalid=0 send_seq=82192 receive_seq=82192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.034 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=731128 sysload=0.13 cputime=212.059 memavail=1628456 print_time=5233.695 buffer_time=3.150 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 5222.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2827531 bytes_read=1541219 bytes_retransmit=9 bytes_invalid=0 send_seq=82207 receive_seq=82207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=731128 sysload=0.13 cputime=212.111 memavail=1628628 print_time=5233.695 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.9 pwm=0.455
Stats 5223.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2828172 bytes_read=1541601 bytes_retransmit=9 bytes_invalid=0 send_seq=82226 receive_seq=82226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=731192 sysload=0.13 cputime=212.144 memavail=1628780 print_time=5235.007 buffer_time=2.462 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 5224.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2828834 bytes_read=1542028 bytes_retransmit=9 bytes_invalid=0 send_seq=82248 receive_seq=82248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=731254 sysload=0.13 cputime=212.199 memavail=1629032 print_time=5236.297 buffer_time=2.751 print_stall=0 extruder: target=215 temp=215.2 pwm=0.322
Stats 5225.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2829447 bytes_read=1542429 bytes_retransmit=9 bytes_invalid=0 send_seq=82268 receive_seq=82268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=731318 sysload=0.12 cputime=212.253 memavail=1629468 print_time=5237.562 buffer_time=3.016 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 5226.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2829719 bytes_read=1542806 bytes_retransmit=9 bytes_invalid=0 send_seq=82283 receive_seq=82283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=731318 sysload=0.12 cputime=212.305 memavail=1629796 print_time=5237.562 buffer_time=2.015 print_stall=0 extruder: target=215 temp=215.1 pwm=0.372
Stats 5227.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2830411 bytes_read=1543238 bytes_retransmit=9 bytes_invalid=0 send_seq=82306 receive_seq=82306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=731407 sysload=0.12 cputime=212.357 memavail=1629780 print_time=5238.816 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.8 pwm=0.573
Stats 5228.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2831037 bytes_read=1543639 bytes_retransmit=9 bytes_invalid=0 send_seq=82326 receive_seq=82326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=731469 sysload=0.12 cputime=212.408 memavail=1630048 print_time=5240.016 buffer_time=2.466 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 5229.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2831690 bytes_read=1544031 bytes_retransmit=9 bytes_invalid=0 send_seq=82347 receive_seq=82347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.620 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=731531 sysload=0.12 cputime=212.462 memavail=1629788 print_time=5241.193 buffer_time=2.643 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 5230.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2832188 bytes_read=1544433 bytes_retransmit=9 bytes_invalid=0 send_seq=82364 receive_seq=82364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=731595 sysload=0.11 cputime=212.514 memavail=1629560 print_time=5242.337 buffer_time=2.786 print_stall=0 extruder: target=215 temp=215.2 pwm=0.356
Stats 5231.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2832898 bytes_read=1544859 bytes_retransmit=9 bytes_invalid=0 send_seq=82386 receive_seq=82386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=731657 sysload=0.11 cputime=212.569 memavail=1629560 print_time=5243.446 buffer_time=2.894 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 5232.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2833460 bytes_read=1545241 bytes_retransmit=9 bytes_invalid=0 send_seq=82405 receive_seq=82405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=731717 sysload=0.11 cputime=212.622 memavail=1629308 print_time=5244.522 buffer_time=2.969 print_stall=0 extruder: target=215 temp=215.0 pwm=0.431
Stats 5233.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2834070 bytes_read=1545658 bytes_retransmit=9 bytes_invalid=0 send_seq=82425 receive_seq=82425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=731778 sysload=0.11 cputime=212.664 memavail=1629544 print_time=5245.552 buffer_time=2.998 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 5234.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2834695 bytes_read=1546054 bytes_retransmit=9 bytes_invalid=0 send_seq=82447 receive_seq=82444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=731838 sysload=0.11 cputime=212.719 memavail=1629564 print_time=5246.533 buffer_time=2.979 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 5235.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2835273 bytes_read=1546451 bytes_retransmit=9 bytes_invalid=0 send_seq=82466 receive_seq=82466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=731899 sysload=0.10 cputime=212.771 memavail=1629800 print_time=5247.466 buffer_time=2.911 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 5236.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2835902 bytes_read=1546893 bytes_retransmit=9 bytes_invalid=0 send_seq=82488 receive_seq=82488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=731961 sysload=0.10 cputime=212.808 memavail=1629508 print_time=5248.351 buffer_time=2.796 print_stall=0 extruder: target=215 temp=215.2 pwm=0.285
Stats 5237.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2836508 bytes_read=1547294 bytes_retransmit=9 bytes_invalid=0 send_seq=82508 receive_seq=82508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=732021 sysload=0.10 cputime=212.865 memavail=1629500 print_time=5249.173 buffer_time=2.618 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 5238.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2837075 bytes_read=1547676 bytes_retransmit=9 bytes_invalid=0 send_seq=82527 receive_seq=82527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.6 sd_pos=732082 sysload=0.10 cputime=212.918 memavail=1629748 print_time=5249.925 buffer_time=2.369 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 5239.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2837711 bytes_read=1548094 bytes_retransmit=9 bytes_invalid=0 send_seq=82548 receive_seq=82548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=732175 sysload=0.10 cputime=212.971 memavail=1629512 print_time=5250.619 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 5240.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000044 bytes_write=2838527 bytes_read=1548498 bytes_retransmit=9 bytes_invalid=0 send_seq=82571 receive_seq=82571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=732302 sysload=0.10 cputime=213.027 memavail=1629260 print_time=5251.706 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.3 pwm=0.339
Stats 5241.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2840060 bytes_read=1548965 bytes_retransmit=9 bytes_invalid=0 send_seq=82606 receive_seq=82606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.473 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=732599 sysload=0.10 cputime=213.064 memavail=1629060 print_time=5252.908 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.1 pwm=0.524
Stats 5242.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2840925 bytes_read=1549390 bytes_retransmit=9 bytes_invalid=0 send_seq=82630 receive_seq=82630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=732924 sysload=0.10 cputime=213.122 memavail=1628808 print_time=5253.585 buffer_time=2.026 print_stall=0 extruder: target=215 temp=215.2 pwm=0.444
Stats 5243.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2841653 bytes_read=1549791 bytes_retransmit=9 bytes_invalid=0 send_seq=82651 receive_seq=82651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.663 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=733274 sysload=0.10 cputime=213.185 memavail=1629580 print_time=5254.619 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 5244.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2842219 bytes_read=1550168 bytes_retransmit=9 bytes_invalid=0 send_seq=82669 receive_seq=82669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=733580 sysload=0.10 cputime=213.244 memavail=1630064 print_time=5255.654 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 5245.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2842959 bytes_read=1550585 bytes_retransmit=9 bytes_invalid=0 send_seq=82689 receive_seq=82689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=733915 sysload=0.09 cputime=213.303 memavail=1630072 print_time=5256.721 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 5246.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2843549 bytes_read=1550991 bytes_retransmit=9 bytes_invalid=0 send_seq=82707 receive_seq=82707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=734165 sysload=0.09 cputime=213.363 memavail=1629816 print_time=5257.593 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.2 pwm=0.344
Stats 5247.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2844584 bytes_read=1551413 bytes_retransmit=9 bytes_invalid=0 send_seq=82734 receive_seq=82734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.0 mcu_temp: temp=41.4 sd_pos=734643 sysload=0.09 cputime=213.429 memavail=1629828 print_time=5258.853 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.1 pwm=0.492
Stats 5248.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2845231 bytes_read=1551830 bytes_retransmit=9 bytes_invalid=0 send_seq=82754 receive_seq=82754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.179 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=734893 sysload=0.09 cputime=213.488 memavail=1629808 print_time=5259.615 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 5249.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2845898 bytes_read=1552236 bytes_retransmit=9 bytes_invalid=0 send_seq=82775 receive_seq=82775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=735199 sysload=0.09 cputime=213.548 memavail=1629572 print_time=5260.676 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.8 pwm=0.583
Stats 5250.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=2846583 bytes_read=1552628 bytes_retransmit=9 bytes_invalid=0 send_seq=82796 receive_seq=82796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.398 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=735539 sysload=0.08 cputime=213.605 memavail=1629572 print_time=5261.738 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 5251.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2847227 bytes_read=1553055 bytes_retransmit=9 bytes_invalid=0 send_seq=82815 receive_seq=82815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=735928 sysload=0.08 cputime=213.665 memavail=1629052 print_time=5262.720 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 5252.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2848022 bytes_read=1553466 bytes_retransmit=9 bytes_invalid=0 send_seq=82837 receive_seq=82837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=736147 sysload=0.08 cputime=213.724 memavail=1628800 print_time=5263.591 buffer_time=2.025 print_stall=0 extruder: target=215 temp=215.1 pwm=0.411
Stats 5253.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2848552 bytes_read=1553843 bytes_retransmit=9 bytes_invalid=0 send_seq=82855 receive_seq=82855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=736435 sysload=0.08 cputime=213.765 memavail=1629012 print_time=5264.679 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 5254.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2849076 bytes_read=1554259 bytes_retransmit=9 bytes_invalid=0 send_seq=82872 receive_seq=82872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.3 sd_pos=736587 sysload=0.08 cputime=213.820 memavail=1629008 print_time=5265.585 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 5255.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2849739 bytes_read=1554646 bytes_retransmit=9 bytes_invalid=0 send_seq=82892 receive_seq=82892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=736893 sysload=0.07 cputime=213.878 memavail=1628936 print_time=5267.035 buffer_time=2.466 print_stall=0 extruder: target=215 temp=215.1 pwm=0.445
Stats 5256.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=2850212 bytes_read=1555033 bytes_retransmit=9 bytes_invalid=0 send_seq=82909 receive_seq=82909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=737079 sysload=0.07 cputime=213.933 memavail=1629012 print_time=5267.627 buffer_time=2.058 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 5257.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=2850847 bytes_read=1555469 bytes_retransmit=9 bytes_invalid=0 send_seq=82930 receive_seq=82930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=737329 sysload=0.07 cputime=213.992 memavail=1628752 print_time=5268.847 buffer_time=2.278 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 5258.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=2851934 bytes_read=1555901 bytes_retransmit=9 bytes_invalid=0 send_seq=82959 receive_seq=82959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=737662 sysload=0.07 cputime=214.052 memavail=1628764 print_time=5269.960 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 5259.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=2852872 bytes_read=1556334 bytes_retransmit=9 bytes_invalid=0 send_seq=82986 receive_seq=82986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=737816 sysload=0.07 cputime=214.112 memavail=1628940 print_time=5271.205 buffer_time=2.635 print_stall=0 extruder: target=215 temp=215.0 pwm=0.432
Stats 5260.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=2853440 bytes_read=1556770 bytes_retransmit=9 bytes_invalid=0 send_seq=83007 receive_seq=83007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.106 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=737880 sysload=0.07 cputime=214.169 memavail=1628708 print_time=5271.923 buffer_time=2.353 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 5261.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2854081 bytes_read=1557177 bytes_retransmit=9 bytes_invalid=0 send_seq=83028 receive_seq=83028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=737944 sysload=0.07 cputime=214.222 memavail=1628688 print_time=5272.720 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 5262.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2854653 bytes_read=1557564 bytes_retransmit=9 bytes_invalid=0 send_seq=83048 receive_seq=83048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=738038 sysload=0.07 cputime=214.277 memavail=1628704 print_time=5273.600 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 5263.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2855557 bytes_read=1558020 bytes_retransmit=9 bytes_invalid=0 send_seq=83073 receive_seq=83073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.407 rpi: temp=56.0 mcu_temp: temp=40.3 sd_pos=738165 sysload=0.07 cputime=214.320 memavail=1628868 print_time=5275.467 buffer_time=2.895 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 5264.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2856165 bytes_read=1558412 bytes_retransmit=9 bytes_invalid=0 send_seq=83094 receive_seq=83094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=738229 sysload=0.07 cputime=214.373 memavail=1629124 print_time=5276.479 buffer_time=2.906 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 5265.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2856744 bytes_read=1558804 bytes_retransmit=9 bytes_invalid=0 send_seq=83115 receive_seq=83115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=738321 sysload=0.06 cputime=214.427 memavail=1628936 print_time=5277.550 buffer_time=2.976 print_stall=0 extruder: target=215 temp=214.8 pwm=0.617
Stats 5266.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2857357 bytes_read=1559255 bytes_retransmit=9 bytes_invalid=0 send_seq=83136 receive_seq=83136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=738383 sysload=0.06 cputime=214.483 memavail=1629452 print_time=5278.635 buffer_time=3.061 print_stall=0 extruder: target=215 temp=215.0 pwm=0.557
Stats 5267.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2857667 bytes_read=1559622 bytes_retransmit=9 bytes_invalid=0 send_seq=83152 receive_seq=83152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=738383 sysload=0.06 cputime=214.532 memavail=1629136 print_time=5278.635 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.0 pwm=0.539
Stats 5268.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2858240 bytes_read=1560004 bytes_retransmit=9 bytes_invalid=0 send_seq=83171 receive_seq=83171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.1 sd_pos=738447 sysload=0.06 cputime=214.582 memavail=1628640 print_time=5279.765 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.4 pwm=0.275
Stats 5269.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2858897 bytes_read=1560445 bytes_retransmit=9 bytes_invalid=0 send_seq=83193 receive_seq=83193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.546 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=738509 sysload=0.06 cputime=214.638 memavail=1628644 print_time=5280.929 buffer_time=2.352 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 5270.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=2859554 bytes_read=1560842 bytes_retransmit=9 bytes_invalid=0 send_seq=83215 receive_seq=83215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.478 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=738573 sysload=0.06 cputime=214.690 memavail=1628632 print_time=5282.127 buffer_time=2.550 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 5271.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2860209 bytes_read=1561264 bytes_retransmit=9 bytes_invalid=0 send_seq=83236 receive_seq=83236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=738665 sysload=0.06 cputime=214.744 memavail=1628648 print_time=5283.365 buffer_time=2.787 print_stall=0 extruder: target=215 temp=215.2 pwm=0.420
Stats 5272.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2860858 bytes_read=1561695 bytes_retransmit=9 bytes_invalid=0 send_seq=83259 receive_seq=83259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.071 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=738728 sysload=0.06 cputime=214.797 memavail=1628696 print_time=5284.617 buffer_time=3.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 5273.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2861120 bytes_read=1562062 bytes_retransmit=9 bytes_invalid=0 send_seq=83275 receive_seq=83275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=738728 sysload=0.06 cputime=214.846 memavail=1628912 print_time=5284.617 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.3 pwm=0.265
Stats 5274.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2861716 bytes_read=1562459 bytes_retransmit=9 bytes_invalid=0 send_seq=83294 receive_seq=83294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.116 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=738758 sysload=0.06 cputime=214.899 memavail=1629332 print_time=5285.656 buffer_time=2.075 print_stall=0 extruder: target=215 temp=214.8 pwm=0.628
Stats 5275.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2862478 bytes_read=1562885 bytes_retransmit=9 bytes_invalid=0 send_seq=83316 receive_seq=83316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.301 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=738853 sysload=0.05 cputime=214.957 memavail=1629408 print_time=5287.198 buffer_time=2.616 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 5276.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2863135 bytes_read=1563292 bytes_retransmit=9 bytes_invalid=0 send_seq=83337 receive_seq=83337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=738914 sysload=0.05 cputime=215.011 memavail=1629468 print_time=5288.523 buffer_time=2.941 print_stall=0 extruder: target=215 temp=215.5 pwm=0.065
Stats 5277.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2863830 bytes_read=1563704 bytes_retransmit=9 bytes_invalid=0 send_seq=83359 receive_seq=83359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.8 pwm=0.985 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=739008 sysload=0.05 cputime=215.067 memavail=1629964 print_time=5289.873 buffer_time=3.289 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 5278.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2864134 bytes_read=1564100 bytes_retransmit=9 bytes_invalid=0 send_seq=83375 receive_seq=83375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=739008 sysload=0.05 cputime=215.119 memavail=1630012 print_time=5289.873 buffer_time=2.287 print_stall=0 extruder: target=215 temp=214.7 pwm=0.674
Stats 5279.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2864826 bytes_read=1564497 bytes_retransmit=9 bytes_invalid=0 send_seq=83397 receive_seq=83397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=739070 sysload=0.05 cputime=215.174 memavail=1630008 print_time=5291.240 buffer_time=2.653 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 5280.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2865456 bytes_read=1564899 bytes_retransmit=9 bytes_invalid=0 send_seq=83417 receive_seq=83417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.506 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=739133 sysload=0.05 cputime=215.227 memavail=1630016 print_time=5292.622 buffer_time=3.035 print_stall=0 extruder: target=215 temp=214.7 pwm=0.547
Stats 5281.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2865755 bytes_read=1565310 bytes_retransmit=9 bytes_invalid=0 send_seq=83433 receive_seq=83433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=739133 sysload=0.05 cputime=215.279 memavail=1629740 print_time=5292.622 buffer_time=2.035 print_stall=0 extruder: target=215 temp=214.7 pwm=0.506
Stats 5282.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2866439 bytes_read=1565702 bytes_retransmit=9 bytes_invalid=0 send_seq=83454 receive_seq=83454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.594 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=739193 sysload=0.05 cputime=215.333 memavail=1630064 print_time=5294.019 buffer_time=2.431 print_stall=0 extruder: target=215 temp=214.8 pwm=0.469
Stats 5283.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2867120 bytes_read=1566114 bytes_retransmit=9 bytes_invalid=0 send_seq=83476 receive_seq=83476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=739255 sysload=0.05 cputime=215.392 memavail=1630064 print_time=5295.431 buffer_time=2.842 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 5284.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2867700 bytes_read=1566530 bytes_retransmit=9 bytes_invalid=0 send_seq=83496 receive_seq=83496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=739317 sysload=0.05 cputime=215.447 memavail=1630080 print_time=5296.857 buffer_time=3.268 print_stall=0 extruder: target=215 temp=214.6 pwm=0.689
Stats 5285.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=2868050 bytes_read=1566902 bytes_retransmit=9 bytes_invalid=0 send_seq=83513 receive_seq=83513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=739317 sysload=0.04 cputime=215.498 memavail=1629812 print_time=5296.857 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.8 pwm=0.597
Stats 5286.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2868748 bytes_read=1567334 bytes_retransmit=9 bytes_invalid=0 send_seq=83536 receive_seq=83536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=739413 sysload=0.04 cputime=215.553 memavail=1629828 print_time=5298.309 buffer_time=2.719 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 5287.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2869358 bytes_read=1567745 bytes_retransmit=9 bytes_invalid=0 send_seq=83555 receive_seq=83555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.471 rpi: temp=55.5 mcu_temp: temp=40.8 sd_pos=739475 sysload=0.04 cputime=215.609 memavail=1629560 print_time=5299.749 buffer_time=3.158 print_stall=0 extruder: target=215 temp=214.9 pwm=0.576
Stats 5288.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2869656 bytes_read=1568112 bytes_retransmit=9 bytes_invalid=0 send_seq=83571 receive_seq=83571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.333 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=739475 sysload=0.04 cputime=215.662 memavail=1629560 print_time=5299.749 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 5289.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2870346 bytes_read=1568519 bytes_retransmit=9 bytes_invalid=0 send_seq=83592 receive_seq=83592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=739536 sysload=0.04 cputime=215.697 memavail=1629828 print_time=5301.207 buffer_time=2.614 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 5290.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2870983 bytes_read=1568940 bytes_retransmit=9 bytes_invalid=0 send_seq=83613 receive_seq=83613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=739595 sysload=0.04 cputime=215.733 memavail=1629564 print_time=5302.671 buffer_time=3.079 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 5291.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2871239 bytes_read=1569312 bytes_retransmit=9 bytes_invalid=0 send_seq=83627 receive_seq=83627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=739595 sysload=0.04 cputime=215.781 memavail=1630052 print_time=5302.671 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 5292.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2871926 bytes_read=1569724 bytes_retransmit=9 bytes_invalid=0 send_seq=83649 receive_seq=83649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.228 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=739690 sysload=0.04 cputime=215.836 memavail=1630068 print_time=5304.144 buffer_time=2.550 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 5293.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2872636 bytes_read=1570150 bytes_retransmit=9 bytes_invalid=0 send_seq=83671 receive_seq=83671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.499 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=739752 sysload=0.04 cputime=215.893 memavail=1629756 print_time=5305.623 buffer_time=3.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 5294.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2872834 bytes_read=1570502 bytes_retransmit=9 bytes_invalid=0 send_seq=83684 receive_seq=83684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.425 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=739752 sysload=0.04 cputime=215.942 memavail=1629488 print_time=5305.623 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 5295.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2873504 bytes_read=1570904 bytes_retransmit=9 bytes_invalid=0 send_seq=83704 receive_seq=83704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.465 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=739845 sysload=0.04 cputime=215.999 memavail=1629512 print_time=5307.124 buffer_time=2.528 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 5296.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2874222 bytes_read=1571345 bytes_retransmit=9 bytes_invalid=0 send_seq=83726 receive_seq=83726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=739907 sysload=0.04 cputime=216.056 memavail=1629520 print_time=5308.599 buffer_time=3.002 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 5297.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2874458 bytes_read=1571702 bytes_retransmit=9 bytes_invalid=0 send_seq=83740 receive_seq=83740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.168 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=739907 sysload=0.04 cputime=216.106 memavail=1629196 print_time=5308.599 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 5298.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2875134 bytes_read=1572104 bytes_retransmit=9 bytes_invalid=0 send_seq=83760 receive_seq=83760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.488 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=739970 sysload=0.04 cputime=216.144 memavail=1629212 print_time=5310.088 buffer_time=2.491 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 5299.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2875831 bytes_read=1572521 bytes_retransmit=9 bytes_invalid=0 send_seq=83782 receive_seq=83782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=740030 sysload=0.04 cputime=216.202 memavail=1629232 print_time=5311.578 buffer_time=2.980 print_stall=0 extruder: target=215 temp=215.1 pwm=0.392
Stats 5300.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000044 bytes_write=2876410 bytes_read=1572897 bytes_retransmit=9 bytes_invalid=0 send_seq=83802 receive_seq=83802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=740091 sysload=0.03 cputime=216.260 memavail=1629196 print_time=5313.067 buffer_time=3.468 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 5301.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2876686 bytes_read=1573273 bytes_retransmit=9 bytes_invalid=0 send_seq=83816 receive_seq=83816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.457 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=740091 sysload=0.03 cputime=216.313 memavail=1629436 print_time=5313.067 buffer_time=2.468 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 5302.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2877363 bytes_read=1573683 bytes_retransmit=9 bytes_invalid=0 send_seq=83837 receive_seq=83837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=740153 sysload=0.03 cputime=216.348 memavail=1629528 print_time=5314.557 buffer_time=2.956 print_stall=0 extruder: target=215 temp=215.0 pwm=0.558
Stats 5303.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2878010 bytes_read=1574075 bytes_retransmit=9 bytes_invalid=0 send_seq=83858 receive_seq=83858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=740248 sysload=0.03 cputime=216.404 memavail=1629344 print_time=5316.046 buffer_time=3.444 print_stall=0 extruder: target=215 temp=215.1 pwm=0.409
Stats 5304.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2878278 bytes_read=1574467 bytes_retransmit=9 bytes_invalid=0 send_seq=83873 receive_seq=83873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=740248 sysload=0.03 cputime=216.454 memavail=1629608 print_time=5316.046 buffer_time=2.439 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 5305.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2878998 bytes_read=1574893 bytes_retransmit=9 bytes_invalid=0 send_seq=83895 receive_seq=83895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=740310 sysload=0.03 cputime=216.511 memavail=1629844 print_time=5317.533 buffer_time=2.923 print_stall=0 extruder: target=215 temp=215.3 pwm=0.278
Stats 5306.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2879624 bytes_read=1575285 bytes_retransmit=9 bytes_invalid=0 send_seq=83916 receive_seq=83916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.645 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=740373 sysload=0.03 cputime=216.566 memavail=1629848 print_time=5319.013 buffer_time=3.403 print_stall=0 extruder: target=215 temp=215.0 pwm=0.574
Stats 5307.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2879916 bytes_read=1575677 bytes_retransmit=9 bytes_invalid=0 send_seq=83931 receive_seq=83931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.100 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=740373 sysload=0.03 cputime=216.621 memavail=1629848 print_time=5319.013 buffer_time=2.402 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 5308.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2880586 bytes_read=1576078 bytes_retransmit=9 bytes_invalid=0 send_seq=83951 receive_seq=83951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.207 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=740434 sysload=0.03 cputime=216.657 memavail=1629844 print_time=5320.486 buffer_time=2.875 print_stall=0 extruder: target=215 temp=215.2 pwm=0.378
Stats 5309.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2881214 bytes_read=1576465 bytes_retransmit=9 bytes_invalid=0 send_seq=83971 receive_seq=83971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=740498 sysload=0.03 cputime=216.713 memavail=1629596 print_time=5321.952 buffer_time=3.340 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 5310.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2881451 bytes_read=1576862 bytes_retransmit=9 bytes_invalid=0 send_seq=83984 receive_seq=83984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.945 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=740498 sysload=0.03 cputime=216.765 memavail=1629612 print_time=5321.952 buffer_time=2.339 print_stall=0 extruder: target=215 temp=214.9 pwm=0.596
Stats 5311.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2882152 bytes_read=1577273 bytes_retransmit=9 bytes_invalid=0 send_seq=84006 receive_seq=84006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=740560 sysload=0.03 cputime=216.820 memavail=1629536 print_time=5323.411 buffer_time=2.797 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 5312.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2882777 bytes_read=1577660 bytes_retransmit=9 bytes_invalid=0 send_seq=84026 receive_seq=84026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.544 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=740656 sysload=0.03 cputime=216.874 memavail=1629304 print_time=5324.863 buffer_time=3.248 print_stall=0 extruder: target=215 temp=214.8 pwm=0.552
Stats 5313.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2883065 bytes_read=1578052 bytes_retransmit=9 bytes_invalid=0 send_seq=84041 receive_seq=84041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.639 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=740656 sysload=0.03 cputime=216.911 memavail=1628784 print_time=5324.863 buffer_time=2.247 print_stall=0 extruder: target=215 temp=214.8 pwm=0.592
Stats 5314.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2883776 bytes_read=1578463 bytes_retransmit=9 bytes_invalid=0 send_seq=84063 receive_seq=84063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=740718 sysload=0.03 cputime=216.966 memavail=1629052 print_time=5326.305 buffer_time=2.689 print_stall=0 extruder: target=215 temp=215.2 pwm=0.382
Stats 5315.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2884385 bytes_read=1578850 bytes_retransmit=9 bytes_invalid=0 send_seq=84083 receive_seq=84083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=740782 sysload=0.02 cputime=217.019 memavail=1629036 print_time=5327.734 buffer_time=3.116 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 5316.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2884661 bytes_read=1579262 bytes_retransmit=9 bytes_invalid=0 send_seq=84099 receive_seq=84099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.517 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=740782 sysload=0.02 cputime=217.072 memavail=1628800 print_time=5327.734 buffer_time=2.116 print_stall=0 extruder: target=215 temp=214.9 pwm=0.621
Stats 5317.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2885376 bytes_read=1579678 bytes_retransmit=9 bytes_invalid=0 send_seq=84122 receive_seq=84122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=740844 sysload=0.02 cputime=217.127 memavail=1628784 print_time=5329.147 buffer_time=2.528 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 5318.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2886081 bytes_read=1580080 bytes_retransmit=9 bytes_invalid=0 send_seq=84145 receive_seq=84145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.498 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=740908 sysload=0.02 cputime=217.163 memavail=1629108 print_time=5330.546 buffer_time=2.926 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 5319.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2886716 bytes_read=1580513 bytes_retransmit=9 bytes_invalid=0 send_seq=84166 receive_seq=84166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=740970 sysload=0.02 cputime=217.217 memavail=1629100 print_time=5331.931 buffer_time=3.310 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 5320.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2886978 bytes_read=1580884 bytes_retransmit=9 bytes_invalid=0 send_seq=84180 receive_seq=84180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=740970 sysload=0.02 cputime=217.267 memavail=1629100 print_time=5331.931 buffer_time=2.309 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 5321.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2887683 bytes_read=1581301 bytes_retransmit=9 bytes_invalid=0 send_seq=84203 receive_seq=84203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=741066 sysload=0.02 cputime=217.324 memavail=1628868 print_time=5333.300 buffer_time=2.678 print_stall=0 extruder: target=215 temp=214.8 pwm=0.588
Stats 5322.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2888305 bytes_read=1581713 bytes_retransmit=9 bytes_invalid=0 send_seq=84222 receive_seq=84222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=741127 sysload=0.02 cputime=217.378 memavail=1628848 print_time=5334.651 buffer_time=3.028 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 5323.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2888604 bytes_read=1582099 bytes_retransmit=9 bytes_invalid=0 send_seq=84239 receive_seq=84239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.325 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=741127 sysload=0.02 cputime=217.412 memavail=1629436 print_time=5334.651 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 5324.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2889251 bytes_read=1582496 bytes_retransmit=9 bytes_invalid=0 send_seq=84261 receive_seq=84261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=741189 sysload=0.02 cputime=217.466 memavail=1629424 print_time=5335.980 buffer_time=2.356 print_stall=0 extruder: target=215 temp=214.8 pwm=0.520
Stats 5325.8: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2889938 bytes_read=1582923 bytes_retransmit=9 bytes_invalid=0 send_seq=84283 receive_seq=84283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=741250 sysload=0.02 cputime=217.503 memavail=1629428 print_time=5337.285 buffer_time=2.661 print_stall=0 extruder: target=215 temp=215.0 pwm=0.364
Stats 5326.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2890539 bytes_read=1583344 bytes_retransmit=9 bytes_invalid=0 send_seq=84304 receive_seq=84304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=741282 sysload=0.02 cputime=217.556 memavail=1629192 print_time=5338.322 buffer_time=2.697 print_stall=0 extruder: target=215 temp=215.1 pwm=0.338
Stats 5327.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2891197 bytes_read=1583731 bytes_retransmit=9 bytes_invalid=0 send_seq=84324 receive_seq=84324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=741376 sysload=0.02 cputime=217.613 memavail=1629192 print_time=5339.826 buffer_time=3.199 print_stall=0 extruder: target=215 temp=214.9 pwm=0.467
Stats 5328.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2891496 bytes_read=1584123 bytes_retransmit=9 bytes_invalid=0 send_seq=84339 receive_seq=84339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=741376 sysload=0.02 cputime=217.664 memavail=1629176 print_time=5339.826 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.8 pwm=0.550
Stats 5329.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2892206 bytes_read=1584549 bytes_retransmit=9 bytes_invalid=0 send_seq=84364 receive_seq=84364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.370 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=741472 sysload=0.02 cputime=217.721 memavail=1628940 print_time=5341.066 buffer_time=2.438 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 5330.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2892856 bytes_read=1584946 bytes_retransmit=9 bytes_invalid=0 send_seq=84386 receive_seq=84386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=741534 sysload=0.02 cputime=217.776 memavail=1629172 print_time=5342.263 buffer_time=2.634 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 5331.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2893448 bytes_read=1585383 bytes_retransmit=9 bytes_invalid=0 send_seq=84407 receive_seq=84407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=741598 sysload=0.02 cputime=217.832 memavail=1628696 print_time=5343.432 buffer_time=2.802 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 5332.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2894072 bytes_read=1585789 bytes_retransmit=9 bytes_invalid=0 send_seq=84428 receive_seq=84428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.380 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=741659 sysload=0.02 cputime=217.888 memavail=1628680 print_time=5344.566 buffer_time=2.936 print_stall=0 extruder: target=215 temp=215.1 pwm=0.429
Stats 5333.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2894653 bytes_read=1586176 bytes_retransmit=9 bytes_invalid=0 send_seq=84448 receive_seq=84448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=741750 sysload=0.02 cputime=217.927 memavail=1628668 print_time=5345.667 buffer_time=3.035 print_stall=0 extruder: target=215 temp=215.1 pwm=0.436
Stats 5334.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2894955 bytes_read=1586568 bytes_retransmit=9 bytes_invalid=0 send_seq=84463 receive_seq=84463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.381 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=741750 sysload=0.02 cputime=217.978 memavail=1628936 print_time=5345.667 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 5335.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2895599 bytes_read=1586984 bytes_retransmit=9 bytes_invalid=0 send_seq=84486 receive_seq=84486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.289 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=741812 sysload=0.02 cputime=218.035 memavail=1628920 print_time=5346.729 buffer_time=2.096 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 5336.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2896199 bytes_read=1587396 bytes_retransmit=9 bytes_invalid=0 send_seq=84508 receive_seq=84508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.818 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=741874 sysload=0.02 cputime=218.088 memavail=1628672 print_time=5347.748 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 5337.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2896778 bytes_read=1587818 bytes_retransmit=9 bytes_invalid=0 send_seq=84529 receive_seq=84529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.621 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=741935 sysload=0.02 cputime=218.143 memavail=1628688 print_time=5348.718 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 5338.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2897376 bytes_read=1588224 bytes_retransmit=9 bytes_invalid=0 send_seq=84550 receive_seq=84550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=742028 sysload=0.02 cputime=218.199 memavail=1628680 print_time=5349.673 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 5339.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2898250 bytes_read=1588636 bytes_retransmit=9 bytes_invalid=0 send_seq=84575 receive_seq=84575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.139 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=742152 sysload=0.02 cputime=218.252 memavail=1628680 print_time=5351.316 buffer_time=2.678 print_stall=0 extruder: target=215 temp=214.8 pwm=0.622
Stats 5340.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2898892 bytes_read=1589058 bytes_retransmit=9 bytes_invalid=0 send_seq=84596 receive_seq=84596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.486 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=742243 sysload=0.02 cputime=218.309 memavail=1628700 print_time=5352.052 buffer_time=2.414 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 5341.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2899557 bytes_read=1589494 bytes_retransmit=9 bytes_invalid=0 send_seq=84620 receive_seq=84620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=742303 sysload=0.02 cputime=218.368 memavail=1628680 print_time=5352.718 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.2 pwm=0.287
Stats 5342.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2900348 bytes_read=1589896 bytes_retransmit=9 bytes_invalid=0 send_seq=84643 receive_seq=84643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.174 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=742430 sysload=0.02 cputime=218.423 memavail=1628960 print_time=5353.773 buffer_time=2.134 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 5343.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2902020 bytes_read=1590403 bytes_retransmit=9 bytes_invalid=0 send_seq=84681 receive_seq=84681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=742897 sysload=0.02 cputime=218.487 memavail=1629700 print_time=5354.831 buffer_time=2.190 print_stall=0 extruder: target=215 temp=215.1 pwm=0.403
Stats 5344.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2902635 bytes_read=1590814 bytes_retransmit=9 bytes_invalid=0 send_seq=84703 receive_seq=84703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=743141 sysload=0.02 cputime=218.548 memavail=1629432 print_time=5355.862 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.1 pwm=0.480
Stats 5345.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2903226 bytes_read=1591181 bytes_retransmit=9 bytes_invalid=0 send_seq=84720 receive_seq=84719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=743381 sysload=0.01 cputime=218.607 memavail=1629452 print_time=5356.894 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 5346.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2903874 bytes_read=1591618 bytes_retransmit=9 bytes_invalid=0 send_seq=84740 receive_seq=84740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=743563 sysload=0.01 cputime=218.666 memavail=1629484 print_time=5357.667 buffer_time=2.026 print_stall=0 extruder: target=215 temp=215.2 pwm=0.363
Stats 5347.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2904503 bytes_read=1592014 bytes_retransmit=9 bytes_invalid=0 send_seq=84759 receive_seq=84759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=743814 sysload=0.01 cputime=218.726 memavail=1629436 print_time=5358.699 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 5348.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2905440 bytes_read=1592426 bytes_retransmit=9 bytes_invalid=0 send_seq=84784 receive_seq=84784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=744126 sysload=0.01 cputime=218.786 memavail=1629952 print_time=5359.779 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 5349.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2906087 bytes_read=1592843 bytes_retransmit=9 bytes_invalid=0 send_seq=84804 receive_seq=84804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.531 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=744367 sysload=0.01 cputime=218.848 memavail=1629700 print_time=5360.837 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.0 pwm=0.558
Stats 5350.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=2906747 bytes_read=1593259 bytes_retransmit=9 bytes_invalid=0 send_seq=84827 receive_seq=84827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=744608 sysload=0.01 cputime=218.911 memavail=1629700 print_time=5361.896 buffer_time=2.251 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 5351.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2907304 bytes_read=1593641 bytes_retransmit=9 bytes_invalid=0 send_seq=84843 receive_seq=84843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=744793 sysload=0.01 cputime=218.966 memavail=1629432 print_time=5362.690 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 5352.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2908003 bytes_read=1594058 bytes_retransmit=9 bytes_invalid=0 send_seq=84863 receive_seq=84863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.522 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=745039 sysload=0.01 cputime=219.027 memavail=1629456 print_time=5363.748 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 5353.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2908858 bytes_read=1594479 bytes_retransmit=9 bytes_invalid=0 send_seq=84887 receive_seq=84887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.396 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=745331 sysload=0.01 cputime=219.088 memavail=1628932 print_time=5364.698 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 5354.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2909313 bytes_read=1594851 bytes_retransmit=9 bytes_invalid=0 send_seq=84904 receive_seq=84904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.611 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=745516 sysload=0.01 cputime=219.144 memavail=1628952 print_time=5365.783 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 5355.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2909946 bytes_read=1595263 bytes_retransmit=9 bytes_invalid=0 send_seq=84923 receive_seq=84923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=745698 sysload=0.01 cputime=219.204 memavail=1628932 print_time=5366.867 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 5356.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2910535 bytes_read=1595679 bytes_retransmit=9 bytes_invalid=0 send_seq=84943 receive_seq=84943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=745882 sysload=0.01 cputime=219.267 memavail=1628888 print_time=5367.952 buffer_time=2.302 print_stall=0 extruder: target=215 temp=214.8 pwm=0.591
Stats 5357.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2911032 bytes_read=1596046 bytes_retransmit=9 bytes_invalid=0 send_seq=84959 receive_seq=84959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=746006 sysload=0.01 cputime=219.322 memavail=1628876 print_time=5368.675 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.1 pwm=0.335
Stats 5358.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2911564 bytes_read=1596441 bytes_retransmit=9 bytes_invalid=0 send_seq=84975 receive_seq=84975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.385 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=746197 sysload=0.01 cputime=219.383 memavail=1628644 print_time=5369.759 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.7 pwm=0.578
Stats 5359.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2912161 bytes_read=1596831 bytes_retransmit=9 bytes_invalid=0 send_seq=84995 receive_seq=84995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=746489 sysload=0.01 cputime=219.443 memavail=1628888 print_time=5370.790 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 5360.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000058 bytes_write=2913332 bytes_read=1597253 bytes_retransmit=9 bytes_invalid=0 send_seq=85024 receive_seq=85024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=746647 sysload=0.01 cputime=219.499 memavail=1629196 print_time=5372.199 buffer_time=2.546 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 5361.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2914012 bytes_read=1597683 bytes_retransmit=9 bytes_invalid=0 send_seq=85046 receive_seq=85046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=746710 sysload=0.01 cputime=219.535 memavail=1628960 print_time=5372.916 buffer_time=2.263 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 5362.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2914588 bytes_read=1598072 bytes_retransmit=9 bytes_invalid=0 send_seq=85065 receive_seq=85065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=746773 sysload=0.01 cputime=219.590 memavail=1628944 print_time=5373.712 buffer_time=2.059 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 5363.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2915447 bytes_read=1598479 bytes_retransmit=9 bytes_invalid=0 send_seq=85089 receive_seq=85089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.234 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=746931 sysload=0.01 cputime=219.629 memavail=1628976 print_time=5375.493 buffer_time=2.839 print_stall=0 extruder: target=215 temp=215.1 pwm=0.417
Stats 5364.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2916035 bytes_read=1598901 bytes_retransmit=9 bytes_invalid=0 send_seq=85110 receive_seq=85110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=746995 sysload=0.01 cputime=219.688 memavail=1628968 print_time=5376.455 buffer_time=2.799 print_stall=0 extruder: target=215 temp=215.3 pwm=0.288
Stats 5365.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=2916616 bytes_read=1599302 bytes_retransmit=9 bytes_invalid=0 send_seq=85130 receive_seq=85130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=747059 sysload=0.01 cputime=219.743 memavail=1628976 print_time=5377.466 buffer_time=2.809 print_stall=0 extruder: target=215 temp=214.9 pwm=0.616
Stats 5366.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2917240 bytes_read=1599704 bytes_retransmit=9 bytes_invalid=0 send_seq=85150 receive_seq=85150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=747150 sysload=0.01 cputime=219.801 memavail=1628652 print_time=5378.534 buffer_time=2.877 print_stall=0 extruder: target=215 temp=215.3 pwm=0.283
Stats 5367.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2917859 bytes_read=1600121 bytes_retransmit=9 bytes_invalid=0 send_seq=85170 receive_seq=85170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=747214 sysload=0.01 cputime=219.857 memavail=1628920 print_time=5379.618 buffer_time=2.960 print_stall=0 extruder: target=215 temp=215.0 pwm=0.597
Stats 5368.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2918458 bytes_read=1600532 bytes_retransmit=9 bytes_invalid=0 send_seq=85192 receive_seq=85192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.678 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=747276 sysload=0.01 cputime=219.915 memavail=1629032 print_time=5380.746 buffer_time=3.087 print_stall=0 extruder: target=215 temp=215.1 pwm=0.543
Stats 5369.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2918725 bytes_read=1600879 bytes_retransmit=9 bytes_invalid=0 send_seq=85204 receive_seq=85204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=747276 sysload=0.01 cputime=219.967 memavail=1628552 print_time=5380.746 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 5370.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=2919381 bytes_read=1601306 bytes_retransmit=9 bytes_invalid=0 send_seq=85226 receive_seq=85226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=747340 sysload=0.01 cputime=220.023 memavail=1628732 print_time=5381.908 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.8 pwm=0.612
Stats 5371.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2920035 bytes_read=1601732 bytes_retransmit=9 bytes_invalid=0 send_seq=85248 receive_seq=85248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=747399 sysload=0.01 cputime=220.081 memavail=1628304 print_time=5383.104 buffer_time=2.444 print_stall=0 extruder: target=215 temp=214.9 pwm=0.410
Stats 5372.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2920686 bytes_read=1602124 bytes_retransmit=9 bytes_invalid=0 send_seq=85269 receive_seq=85269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.333 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=747493 sysload=0.01 cputime=220.140 memavail=1628800 print_time=5384.340 buffer_time=2.679 print_stall=0 extruder: target=215 temp=215.1 pwm=0.360
Stats 5373.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2921351 bytes_read=1602546 bytes_retransmit=9 bytes_invalid=0 send_seq=85290 receive_seq=85290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.301 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=747555 sysload=0.01 cputime=220.177 memavail=1628736 print_time=5385.592 buffer_time=2.930 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 5374.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2922007 bytes_read=1602957 bytes_retransmit=9 bytes_invalid=0 send_seq=85312 receive_seq=85312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.263 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=747618 sysload=0.01 cputime=220.236 memavail=1628440 print_time=5386.869 buffer_time=3.206 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 5375.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=2922317 bytes_read=1603324 bytes_retransmit=9 bytes_invalid=0 send_seq=85328 receive_seq=85328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=747618 sysload=0.01 cputime=220.288 memavail=1628688 print_time=5386.869 buffer_time=2.205 print_stall=0 extruder: target=215 temp=214.8 pwm=0.567
Stats 5376.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2922962 bytes_read=1603761 bytes_retransmit=9 bytes_invalid=0 send_seq=85349 receive_seq=85349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.272 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=747679 sysload=0.01 cputime=220.346 memavail=1628940 print_time=5388.169 buffer_time=2.504 print_stall=0 extruder: target=215 temp=214.9 pwm=0.485
Stats 5377.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2923653 bytes_read=1604177 bytes_retransmit=9 bytes_invalid=0 send_seq=85372 receive_seq=85372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.290 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=747743 sysload=0.01 cputime=220.403 memavail=1628924 print_time=5389.492 buffer_time=2.826 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 5378.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2924207 bytes_read=1604554 bytes_retransmit=9 bytes_invalid=0 send_seq=85390 receive_seq=85390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.802 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=747836 sysload=0.01 cputime=220.457 memavail=1629192 print_time=5390.852 buffer_time=3.186 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 5379.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2924502 bytes_read=1604941 bytes_retransmit=9 bytes_invalid=0 send_seq=85404 receive_seq=85404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.698 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=747836 sysload=0.01 cputime=220.512 memavail=1629468 print_time=5390.852 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.8 pwm=0.592
Stats 5380.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2925183 bytes_read=1605358 bytes_retransmit=9 bytes_invalid=0 send_seq=85425 receive_seq=85425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=747900 sysload=0.01 cputime=220.549 memavail=1629452 print_time=5392.203 buffer_time=2.536 print_stall=0 extruder: target=215 temp=215.1 pwm=0.364
Stats 5381.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2925858 bytes_read=1605765 bytes_retransmit=9 bytes_invalid=0 send_seq=85446 receive_seq=85446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.489 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=747962 sysload=0.01 cputime=220.608 memavail=1628956 print_time=5393.582 buffer_time=2.915 print_stall=0 extruder: target=215 temp=214.8 pwm=0.597
Stats 5382.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2926502 bytes_read=1606196 bytes_retransmit=9 bytes_invalid=0 send_seq=85466 receive_seq=85466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=748025 sysload=0.01 cputime=220.665 memavail=1628964 print_time=5394.976 buffer_time=3.308 print_stall=0 extruder: target=215 temp=214.9 pwm=0.435
Stats 5383.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2926757 bytes_read=1606553 bytes_retransmit=9 bytes_invalid=0 send_seq=85480 receive_seq=85480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=748025 sysload=0.01 cputime=220.698 memavail=1628928 print_time=5394.976 buffer_time=2.307 print_stall=0 extruder: target=215 temp=214.8 pwm=0.517
Stats 5384.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2927451 bytes_read=1606950 bytes_retransmit=9 bytes_invalid=0 send_seq=85502 receive_seq=85502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=748086 sysload=0.01 cputime=220.753 memavail=1628688 print_time=5396.385 buffer_time=2.716 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 5385.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=2928083 bytes_read=1607376 bytes_retransmit=9 bytes_invalid=0 send_seq=85521 receive_seq=85521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=748150 sysload=0.01 cputime=220.808 memavail=1628940 print_time=5397.809 buffer_time=3.138 print_stall=0 extruder: target=215 temp=215.1 pwm=0.366
Stats 5386.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2928378 bytes_read=1607763 bytes_retransmit=9 bytes_invalid=0 send_seq=85538 receive_seq=85538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=748150 sysload=0.01 cputime=220.860 memavail=1629132 print_time=5397.809 buffer_time=2.137 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 5387.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2929049 bytes_read=1608165 bytes_retransmit=9 bytes_invalid=0 send_seq=85561 receive_seq=85561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.583 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=748241 sysload=0.01 cputime=220.915 memavail=1628376 print_time=5399.256 buffer_time=2.584 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 5388.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2929714 bytes_read=1608591 bytes_retransmit=9 bytes_invalid=0 send_seq=85580 receive_seq=85580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=748304 sysload=0.01 cputime=220.969 memavail=1628388 print_time=5400.694 buffer_time=3.021 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 5389.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2929934 bytes_read=1608943 bytes_retransmit=9 bytes_invalid=0 send_seq=85593 receive_seq=85593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.522 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=748304 sysload=0.01 cputime=221.020 memavail=1628396 print_time=5400.694 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.8 pwm=0.611
Stats 5390.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2930575 bytes_read=1609330 bytes_retransmit=9 bytes_invalid=0 send_seq=85613 receive_seq=85613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=748366 sysload=0.01 cputime=221.074 memavail=1628404 print_time=5402.148 buffer_time=2.474 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 5391.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2931251 bytes_read=1609781 bytes_retransmit=9 bytes_invalid=0 send_seq=85634 receive_seq=85634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.001 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=748430 sysload=0.00 cputime=221.131 memavail=1628916 print_time=5403.609 buffer_time=2.934 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 5392.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2931877 bytes_read=1610168 bytes_retransmit=9 bytes_invalid=0 send_seq=85654 receive_seq=85654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=748491 sysload=0.00 cputime=221.167 memavail=1628908 print_time=5405.078 buffer_time=3.403 print_stall=0 extruder: target=215 temp=215.4 pwm=0.224
Stats 5393.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2932121 bytes_read=1610525 bytes_retransmit=9 bytes_invalid=0 send_seq=85668 receive_seq=85668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.135 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=748491 sysload=0.00 cputime=221.199 memavail=1628600 print_time=5405.078 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 5394.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2932770 bytes_read=1610951 bytes_retransmit=9 bytes_invalid=0 send_seq=85687 receive_seq=85687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.425 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=748553 sysload=0.00 cputime=221.258 memavail=1628872 print_time=5406.554 buffer_time=2.877 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 5395.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=2933433 bytes_read=1611353 bytes_retransmit=9 bytes_invalid=0 send_seq=85710 receive_seq=85710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.626 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=748646 sysload=0.00 cputime=221.317 memavail=1628872 print_time=5408.048 buffer_time=3.371 print_stall=0 extruder: target=215 temp=215.2 pwm=0.351
Stats 5396.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2933715 bytes_read=1611745 bytes_retransmit=9 bytes_invalid=0 send_seq=85725 receive_seq=85725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.418 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=748646 sysload=0.16 cputime=221.373 memavail=1628604 print_time=5408.048 buffer_time=2.369 print_stall=0 extruder: target=215 temp=215.2 pwm=0.313
Stats 5397.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2934370 bytes_read=1612151 bytes_retransmit=9 bytes_invalid=0 send_seq=85743 receive_seq=85743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.067 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=748710 sysload=0.16 cputime=221.434 memavail=1628612 print_time=5409.521 buffer_time=2.842 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 5398.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2934990 bytes_read=1612538 bytes_retransmit=9 bytes_invalid=0 send_seq=85763 receive_seq=85763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=748770 sysload=0.16 cputime=221.492 memavail=1628872 print_time=5411.007 buffer_time=3.327 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 5399.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2935259 bytes_read=1612920 bytes_retransmit=9 bytes_invalid=0 send_seq=85779 receive_seq=85779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=748770 sysload=0.16 cputime=221.546 memavail=1628612 print_time=5411.007 buffer_time=2.327 print_stall=0 extruder: target=215 temp=215.2 pwm=0.348
Stats 5400.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2935952 bytes_read=1613336 bytes_retransmit=9 bytes_invalid=0 send_seq=85799 receive_seq=85799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=748833 sysload=0.16 cputime=221.603 memavail=1628864 print_time=5412.492 buffer_time=2.811 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 5401.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2936575 bytes_read=1613738 bytes_retransmit=9 bytes_invalid=0 send_seq=85819 receive_seq=85819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=57.0 mcu_temp: temp=42.7 sd_pos=748895 sysload=0.23 cputime=221.658 memavail=1629368 print_time=5413.978 buffer_time=3.296 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 5402.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2936851 bytes_read=1614120 bytes_retransmit=9 bytes_invalid=0 send_seq=85835 receive_seq=85835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=748895 sysload=0.23 cputime=221.711 memavail=1629436 print_time=5413.978 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.2 pwm=0.326
Stats 5403.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2937543 bytes_read=1614541 bytes_retransmit=9 bytes_invalid=0 send_seq=85856 receive_seq=85856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=748959 sysload=0.23 cputime=221.770 memavail=1629932 print_time=5415.463 buffer_time=2.779 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 5404.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2938169 bytes_read=1614933 bytes_retransmit=9 bytes_invalid=0 send_seq=85877 receive_seq=85877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.208 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=749050 sysload=0.23 cputime=221.828 memavail=1629676 print_time=5416.948 buffer_time=3.264 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 5405.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=2938421 bytes_read=1615310 bytes_retransmit=9 bytes_invalid=0 send_seq=85892 receive_seq=85892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=749050 sysload=0.23 cputime=221.882 memavail=1629680 print_time=5416.948 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 5406.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2939112 bytes_read=1615746 bytes_retransmit=9 bytes_invalid=0 send_seq=85913 receive_seq=85913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=749113 sysload=0.29 cputime=221.942 memavail=1629680 print_time=5418.430 buffer_time=2.744 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 5407.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2939753 bytes_read=1616143 bytes_retransmit=9 bytes_invalid=0 send_seq=85935 receive_seq=85935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.660 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=749175 sysload=0.29 cputime=221.999 memavail=1629656 print_time=5419.905 buffer_time=3.219 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 5408.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2940032 bytes_read=1616525 bytes_retransmit=9 bytes_invalid=0 send_seq=85951 receive_seq=85951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=749175 sysload=0.29 cputime=222.050 memavail=1629676 print_time=5419.905 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.1 pwm=0.406
Stats 5409.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2940711 bytes_read=1616946 bytes_retransmit=9 bytes_invalid=0 send_seq=85972 receive_seq=85972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=0.797 rpi: temp=55.0 mcu_temp: temp=43.0 sd_pos=749238 sysload=0.29 cputime=222.107 memavail=1629684 print_time=5421.373 buffer_time=2.686 print_stall=0 extruder: target=215 temp=215.2 pwm=0.367
Stats 5410.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=2941350 bytes_read=1617338 bytes_retransmit=9 bytes_invalid=0 send_seq=85993 receive_seq=85993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=749298 sysload=0.29 cputime=222.162 memavail=1629684 print_time=5422.834 buffer_time=3.147 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 5411.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2941614 bytes_read=1617730 bytes_retransmit=9 bytes_invalid=0 send_seq=86008 receive_seq=86008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=749298 sysload=0.27 cputime=222.215 memavail=1629936 print_time=5422.834 buffer_time=2.146 print_stall=0 extruder: target=215 temp=214.8 pwm=0.608
Stats 5412.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2942307 bytes_read=1618166 bytes_retransmit=9 bytes_invalid=0 send_seq=86032 receive_seq=86032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.8 pwm=0.701 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=749362 sysload=0.27 cputime=222.273 memavail=1629940 print_time=5424.288 buffer_time=2.599 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 5413.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2942986 bytes_read=1618563 bytes_retransmit=9 bytes_invalid=0 send_seq=86054 receive_seq=86054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.8 pwm=0.939 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=749454 sysload=0.27 cputime=222.308 memavail=1629944 print_time=5425.735 buffer_time=3.045 print_stall=0 extruder: target=215 temp=214.9 pwm=0.577
Stats 5414.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2943209 bytes_read=1618935 bytes_retransmit=9 bytes_invalid=0 send_seq=86068 receive_seq=86068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=749454 sysload=0.27 cputime=222.361 memavail=1629952 print_time=5425.735 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 5415.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2943905 bytes_read=1619371 bytes_retransmit=9 bytes_invalid=0 send_seq=86092 receive_seq=86092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=749518 sysload=0.27 cputime=222.418 memavail=1629756 print_time=5427.171 buffer_time=2.480 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 5416.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2944606 bytes_read=1619793 bytes_retransmit=9 bytes_invalid=0 send_seq=86116 receive_seq=86116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.523 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=749580 sysload=0.25 cputime=222.455 memavail=1629764 print_time=5428.594 buffer_time=2.902 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 5417.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2945170 bytes_read=1620190 bytes_retransmit=9 bytes_invalid=0 send_seq=86135 receive_seq=86135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=749644 sysload=0.25 cputime=222.510 memavail=1629764 print_time=5430.001 buffer_time=3.309 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 5418.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2945452 bytes_read=1620580 bytes_retransmit=9 bytes_invalid=0 send_seq=86151 receive_seq=86151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=749644 sysload=0.25 cputime=222.561 memavail=1629764 print_time=5430.001 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 5419.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2946118 bytes_read=1620962 bytes_retransmit=9 bytes_invalid=0 send_seq=86172 receive_seq=86172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=749706 sysload=0.25 cputime=222.618 memavail=1629752 print_time=5431.394 buffer_time=2.701 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 5420.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2946674 bytes_read=1621343 bytes_retransmit=9 bytes_invalid=0 send_seq=86190 receive_seq=86190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=749770 sysload=0.25 cputime=222.674 memavail=1629760 print_time=5432.773 buffer_time=3.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 5421.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2946993 bytes_read=1621747 bytes_retransmit=9 bytes_invalid=0 send_seq=86207 receive_seq=86207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=749770 sysload=0.23 cputime=222.710 memavail=1629760 print_time=5432.773 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.0 pwm=0.419
Stats 5422.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2947692 bytes_read=1622148 bytes_retransmit=9 bytes_invalid=0 send_seq=86230 receive_seq=86230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=749862 sysload=0.23 cputime=222.764 memavail=1629760 print_time=5434.153 buffer_time=2.458 print_stall=0 extruder: target=215 temp=215.2 pwm=0.388
Stats 5423.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2948364 bytes_read=1622560 bytes_retransmit=9 bytes_invalid=0 send_seq=86252 receive_seq=86252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=749926 sysload=0.23 cputime=222.800 memavail=1630008 print_time=5435.480 buffer_time=2.784 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 5424.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2948989 bytes_read=1622981 bytes_retransmit=9 bytes_invalid=0 send_seq=86273 receive_seq=86273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.530 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=749988 sysload=0.23 cputime=222.855 memavail=1629760 print_time=5436.802 buffer_time=3.106 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 5425.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2949266 bytes_read=1623348 bytes_retransmit=9 bytes_invalid=0 send_seq=86289 receive_seq=86289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=749988 sysload=0.23 cputime=222.904 memavail=1629752 print_time=5436.802 buffer_time=2.105 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 5426.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2949899 bytes_read=1623770 bytes_retransmit=9 bytes_invalid=0 send_seq=86310 receive_seq=86310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=750050 sysload=0.21 cputime=222.959 memavail=1630024 print_time=5438.100 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.8 pwm=0.611
Stats 5427.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2950547 bytes_read=1624191 bytes_retransmit=9 bytes_invalid=0 send_seq=86331 receive_seq=86331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=750109 sysload=0.21 cputime=223.015 memavail=1630016 print_time=5439.375 buffer_time=2.674 print_stall=0 extruder: target=215 temp=215.1 pwm=0.394
Stats 5428.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2951183 bytes_read=1624583 bytes_retransmit=9 bytes_invalid=0 send_seq=86352 receive_seq=86352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=750204 sysload=0.21 cputime=223.070 memavail=1630088 print_time=5440.626 buffer_time=2.922 print_stall=0 extruder: target=215 temp=215.1 pwm=0.358
Stats 5429.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2951825 bytes_read=1624995 bytes_retransmit=9 bytes_invalid=0 send_seq=86374 receive_seq=86374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.434 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=750266 sysload=0.21 cputime=223.126 memavail=1629828 print_time=5441.853 buffer_time=3.148 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 5430.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2952117 bytes_read=1625411 bytes_retransmit=9 bytes_invalid=0 send_seq=86391 receive_seq=86391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.349 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=750266 sysload=0.21 cputime=223.182 memavail=1629836 print_time=5441.853 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 5431.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2952764 bytes_read=1625813 bytes_retransmit=9 bytes_invalid=0 send_seq=86414 receive_seq=86414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=750330 sysload=0.19 cputime=223.236 memavail=1630080 print_time=5443.047 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 5432.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2953378 bytes_read=1626230 bytes_retransmit=9 bytes_invalid=0 send_seq=86434 receive_seq=86434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=750392 sysload=0.19 cputime=223.289 memavail=1629772 print_time=5444.207 buffer_time=2.495 print_stall=0 extruder: target=215 temp=214.9 pwm=0.550
Stats 5433.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2954021 bytes_read=1626631 bytes_retransmit=9 bytes_invalid=0 send_seq=86454 receive_seq=86454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.489 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=750456 sysload=0.19 cputime=223.325 memavail=1629460 print_time=5445.332 buffer_time=2.618 print_stall=0 extruder: target=215 temp=215.0 pwm=0.432
Stats 5434.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2954691 bytes_read=1627038 bytes_retransmit=9 bytes_invalid=0 send_seq=86478 receive_seq=86478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.058 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=750545 sysload=0.19 cputime=223.382 memavail=1629468 print_time=5446.447 buffer_time=2.732 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 5435.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2955235 bytes_read=1627465 bytes_retransmit=9 bytes_invalid=0 send_seq=86497 receive_seq=86497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.8 pwm=0.781 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=750607 sysload=0.19 cputime=223.417 memavail=1629460 print_time=5447.475 buffer_time=2.760 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 5436.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2955827 bytes_read=1627871 bytes_retransmit=9 bytes_invalid=0 send_seq=86518 receive_seq=86518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=750669 sysload=0.18 cputime=223.473 memavail=1629724 print_time=5448.483 buffer_time=2.766 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 5437.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2956442 bytes_read=1628263 bytes_retransmit=9 bytes_invalid=0 send_seq=86539 receive_seq=86539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=750730 sysload=0.18 cputime=223.527 memavail=1629716 print_time=5449.441 buffer_time=2.724 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 5438.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2956988 bytes_read=1628680 bytes_retransmit=9 bytes_invalid=0 send_seq=86559 receive_seq=86559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=750821 sysload=0.18 cputime=223.584 memavail=1629724 print_time=5450.378 buffer_time=2.660 print_stall=0 extruder: target=215 temp=215.0 pwm=0.524
Stats 5439.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2957591 bytes_read=1629086 bytes_retransmit=9 bytes_invalid=0 send_seq=86580 receive_seq=86580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=750883 sysload=0.18 cputime=223.640 memavail=1629720 print_time=5451.207 buffer_time=2.488 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 5440.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=2958225 bytes_read=1629483 bytes_retransmit=9 bytes_invalid=0 send_seq=86603 receive_seq=86602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=750945 sysload=0.18 cputime=223.698 memavail=1629720 print_time=5451.998 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 5441.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2958864 bytes_read=1629936 bytes_retransmit=9 bytes_invalid=0 send_seq=86624 receive_seq=86624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.635 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=751038 sysload=0.16 cputime=223.755 memavail=1629468 print_time=5452.756 buffer_time=2.034 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 5442.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2959717 bytes_read=1630362 bytes_retransmit=9 bytes_invalid=0 send_seq=86649 receive_seq=86649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=751165 sysload=0.16 cputime=223.815 memavail=1629216 print_time=5453.935 buffer_time=2.213 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 5443.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2961223 bytes_read=1630829 bytes_retransmit=9 bytes_invalid=0 send_seq=86685 receive_seq=86685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=751460 sysload=0.16 cputime=223.855 memavail=1629544 print_time=5455.223 buffer_time=2.501 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 5444.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2962093 bytes_read=1631271 bytes_retransmit=9 bytes_invalid=0 send_seq=86710 receive_seq=86710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.531 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=751755 sysload=0.16 cputime=223.917 memavail=1629808 print_time=5455.872 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.2 pwm=0.349
Stats 5445.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=2962811 bytes_read=1631687 bytes_retransmit=9 bytes_invalid=0 send_seq=86733 receive_seq=86733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=752005 sysload=0.16 cputime=223.979 memavail=1629800 print_time=5456.898 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.4 pwm=0.275
Stats 5446.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2963366 bytes_read=1632084 bytes_retransmit=9 bytes_invalid=0 send_seq=86752 receive_seq=86752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.281 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=752249 sysload=0.15 cputime=224.039 memavail=1629800 print_time=5457.925 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 5447.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2964036 bytes_read=1632501 bytes_retransmit=9 bytes_invalid=0 send_seq=86772 receive_seq=86772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=752488 sysload=0.15 cputime=224.101 memavail=1629548 print_time=5458.952 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.2 pwm=0.350
Stats 5448.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2964756 bytes_read=1632912 bytes_retransmit=9 bytes_invalid=0 send_seq=86795 receive_seq=86794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=752800 sysload=0.15 cputime=224.166 memavail=1629304 print_time=5460.185 buffer_time=2.458 print_stall=0 extruder: target=215 temp=215.4 pwm=0.164
Stats 5449.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2965596 bytes_read=1633314 bytes_retransmit=9 bytes_invalid=0 send_seq=86817 receive_seq=86817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=752987 sysload=0.15 cputime=224.227 memavail=1629868 print_time=5460.804 buffer_time=2.077 print_stall=0 extruder: target=215 temp=214.9 pwm=0.589
Stats 5450.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=2966259 bytes_read=1633726 bytes_retransmit=9 bytes_invalid=0 send_seq=86836 receive_seq=86836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=753240 sysload=0.15 cputime=224.270 memavail=1629868 print_time=5461.858 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.8 pwm=0.596
Stats 5451.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2966948 bytes_read=1634157 bytes_retransmit=9 bytes_invalid=0 send_seq=86859 receive_seq=86859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=753481 sysload=0.14 cputime=224.332 memavail=1629868 print_time=5462.912 buffer_time=2.183 print_stall=0 extruder: target=215 temp=215.0 pwm=0.460
Stats 5452.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2967595 bytes_read=1634549 bytes_retransmit=9 bytes_invalid=0 send_seq=86880 receive_seq=86880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.315 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=753722 sysload=0.14 cputime=224.392 memavail=1630120 print_time=5463.966 buffer_time=2.237 print_stall=0 extruder: target=215 temp=215.1 pwm=0.365
Stats 5453.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2968278 bytes_read=1634961 bytes_retransmit=9 bytes_invalid=0 send_seq=86899 receive_seq=86899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=754011 sysload=0.14 cputime=224.431 memavail=1629320 print_time=5464.964 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 5454.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2969041 bytes_read=1635377 bytes_retransmit=9 bytes_invalid=0 send_seq=86922 receive_seq=86922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.611 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=754199 sysload=0.14 cputime=224.488 memavail=1629068 print_time=5465.799 buffer_time=2.069 print_stall=0 extruder: target=215 temp=215.2 pwm=0.353
Stats 5455.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=2969672 bytes_read=1635764 bytes_retransmit=9 bytes_invalid=0 send_seq=86942 receive_seq=86942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.502 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=754391 sysload=0.14 cputime=224.526 memavail=1629328 print_time=5466.879 buffer_time=2.148 print_stall=0 extruder: target=215 temp=215.2 pwm=0.391
Stats 5456.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2970234 bytes_read=1636186 bytes_retransmit=9 bytes_invalid=0 send_seq=86960 receive_seq=86960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=754577 sysload=0.37 cputime=224.585 memavail=1629832 print_time=5467.959 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.2 pwm=0.391
Stats 5457.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2970806 bytes_read=1636592 bytes_retransmit=9 bytes_invalid=0 send_seq=86981 receive_seq=86981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.061 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=754759 sysload=0.37 cputime=224.643 memavail=1629580 print_time=5469.039 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 5458.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2971339 bytes_read=1636984 bytes_retransmit=9 bytes_invalid=0 send_seq=87002 receive_seq=87002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.508 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=754883 sysload=0.37 cputime=224.699 memavail=1629520 print_time=5469.758 buffer_time=2.025 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 5459.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2971926 bytes_read=1637391 bytes_retransmit=9 bytes_invalid=0 send_seq=87020 receive_seq=87020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=755066 sysload=0.37 cputime=224.759 memavail=1629528 print_time=5470.838 buffer_time=2.104 print_stall=0 extruder: target=215 temp=215.2 pwm=0.379
Stats 5460.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=2972909 bytes_read=1637822 bytes_retransmit=9 bytes_invalid=0 send_seq=87046 receive_seq=87046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=755364 sysload=0.37 cputime=224.818 memavail=1629212 print_time=5472.112 buffer_time=2.377 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 5461.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=2973823 bytes_read=1638249 bytes_retransmit=9 bytes_invalid=0 send_seq=87071 receive_seq=87071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.644 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=755517 sysload=0.42 cputime=224.859 memavail=1629464 print_time=5473.288 buffer_time=2.553 print_stall=0 extruder: target=215 temp=215.3 pwm=0.249
Stats 5462.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=2974503 bytes_read=1638671 bytes_retransmit=9 bytes_invalid=0 send_seq=87092 receive_seq=87092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.607 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=755576 sysload=0.42 cputime=224.895 memavail=1629524 print_time=5473.961 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 5463.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=2975365 bytes_read=1639107 bytes_retransmit=9 bytes_invalid=0 send_seq=87119 receive_seq=87119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.683 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=755730 sysload=0.42 cputime=224.937 memavail=1629576 print_time=5475.564 buffer_time=2.828 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 5464.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=2975957 bytes_read=1639484 bytes_retransmit=9 bytes_invalid=0 send_seq=87137 receive_seq=87137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=755791 sysload=0.42 cputime=224.972 memavail=1629324 print_time=5476.461 buffer_time=2.724 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 5465.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000052 bytes_write=2976612 bytes_read=1639911 bytes_retransmit=9 bytes_invalid=0 send_seq=87159 receive_seq=87159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.607 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=755851 sysload=0.42 cputime=225.030 memavail=1629824 print_time=5477.402 buffer_time=2.663 print_stall=0 extruder: target=215 temp=215.0 pwm=0.550
Stats 5466.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2977245 bytes_read=1640337 bytes_retransmit=9 bytes_invalid=0 send_seq=87181 receive_seq=87181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.012 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=755913 sysload=0.46 cputime=225.088 memavail=1630016 print_time=5478.391 buffer_time=2.651 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 5468.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2977830 bytes_read=1640724 bytes_retransmit=9 bytes_invalid=0 send_seq=87201 receive_seq=87201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.031 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=756003 sysload=0.46 cputime=225.144 memavail=1630020 print_time=5479.428 buffer_time=2.688 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 5469.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2978444 bytes_read=1641151 bytes_retransmit=9 bytes_invalid=0 send_seq=87223 receive_seq=87223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.401 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=756062 sysload=0.46 cputime=225.182 memavail=1629768 print_time=5480.507 buffer_time=2.766 print_stall=0 extruder: target=215 temp=214.9 pwm=0.590
Stats 5470.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2979072 bytes_read=1641562 bytes_retransmit=9 bytes_invalid=0 send_seq=87245 receive_seq=87245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.455 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=756125 sysload=0.46 cputime=225.238 memavail=1630020 print_time=5481.618 buffer_time=2.876 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 5471.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=2979703 bytes_read=1641959 bytes_retransmit=9 bytes_invalid=0 send_seq=87267 receive_seq=87267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=756187 sysload=0.46 cputime=225.292 memavail=1630080 print_time=5482.764 buffer_time=3.021 print_stall=0 extruder: target=215 temp=215.2 pwm=0.398
Stats 5472.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2980025 bytes_read=1642371 bytes_retransmit=9 bytes_invalid=0 send_seq=87283 receive_seq=87283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.551 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=756187 sysload=0.51 cputime=225.345 memavail=1630080 print_time=5482.764 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.531
Stats 5473.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2980730 bytes_read=1642802 bytes_retransmit=9 bytes_invalid=0 send_seq=87309 receive_seq=87309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.007 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=756251 sysload=0.51 cputime=225.402 memavail=1630156 print_time=5483.944 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.2 pwm=0.448
Stats 5474.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2981364 bytes_read=1643189 bytes_retransmit=9 bytes_invalid=0 send_seq=87329 receive_seq=87329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.312 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=756344 sysload=0.51 cputime=225.439 memavail=1630084 print_time=5485.169 buffer_time=2.424 print_stall=0 extruder: target=215 temp=215.4 pwm=0.309
Stats 5475.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2982019 bytes_read=1643611 bytes_retransmit=9 bytes_invalid=0 send_seq=87350 receive_seq=87350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=756408 sysload=0.51 cputime=225.495 memavail=1630584 print_time=5486.397 buffer_time=2.650 print_stall=0 extruder: target=215 temp=215.1 pwm=0.524
Stats 5476.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2982712 bytes_read=1644027 bytes_retransmit=9 bytes_invalid=0 send_seq=87373 receive_seq=87373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=756470 sysload=0.51 cputime=225.553 memavail=1630856 print_time=5487.660 buffer_time=2.913 print_stall=0 extruder: target=215 temp=214.9 pwm=0.571
Stats 5477.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=2983257 bytes_read=1644429 bytes_retransmit=9 bytes_invalid=0 send_seq=87393 receive_seq=87393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=756501 sysload=0.55 cputime=225.606 memavail=1630900 print_time=5488.700 buffer_time=2.951 print_stall=0 extruder: target=215 temp=215.2 pwm=0.379
Stats 5478.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=2983647 bytes_read=1644836 bytes_retransmit=9 bytes_invalid=0 send_seq=87411 receive_seq=87411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=756533 sysload=0.55 cputime=225.660 memavail=1630892 print_time=5488.947 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.2 pwm=0.377
Stats 5479.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=2984397 bytes_read=1645262 bytes_retransmit=9 bytes_invalid=0 send_seq=87438 receive_seq=87438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.135 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=756594 sysload=0.55 cputime=225.718 memavail=1630652 print_time=5490.258 buffer_time=2.508 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 5480.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=2985068 bytes_read=1645649 bytes_retransmit=9 bytes_invalid=0 send_seq=87460 receive_seq=87460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.540 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=756690 sysload=0.55 cputime=225.774 memavail=1630316 print_time=5491.591 buffer_time=2.842 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 5481.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=2985707 bytes_read=1646064 bytes_retransmit=9 bytes_invalid=0 send_seq=87482 receive_seq=87482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.8 pwm=0.951 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=756752 sysload=0.55 cputime=225.832 memavail=1629836 print_time=5492.946 buffer_time=3.195 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 5482.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2985991 bytes_read=1646462 bytes_retransmit=9 bytes_invalid=0 send_seq=87500 receive_seq=87500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.171 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=756752 sysload=0.66 cputime=225.884 memavail=1629584 print_time=5492.946 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.1 pwm=0.388
Stats 5483.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2986671 bytes_read=1646859 bytes_retransmit=9 bytes_invalid=0 send_seq=87522 receive_seq=87522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.403 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=756815 sysload=0.66 cputime=225.939 memavail=1629332 print_time=5494.314 buffer_time=2.563 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 5484.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2987351 bytes_read=1647286 bytes_retransmit=9 bytes_invalid=0 send_seq=87544 receive_seq=87544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=756877 sysload=0.66 cputime=225.993 memavail=1628848 print_time=5495.698 buffer_time=2.946 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 5485.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2987984 bytes_read=1647697 bytes_retransmit=9 bytes_invalid=0 send_seq=87566 receive_seq=87566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=756940 sysload=0.66 cputime=226.048 memavail=1628852 print_time=5497.096 buffer_time=3.344 print_stall=0 extruder: target=215 temp=214.9 pwm=0.454
Stats 5486.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2988259 bytes_read=1648064 bytes_retransmit=9 bytes_invalid=0 send_seq=87582 receive_seq=87582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=756940 sysload=0.66 cputime=226.098 memavail=1628852 print_time=5497.096 buffer_time=2.343 print_stall=0 extruder: target=215 temp=214.8 pwm=0.524
Stats 5487.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2988963 bytes_read=1648511 bytes_retransmit=9 bytes_invalid=0 send_seq=87605 receive_seq=87605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=757002 sysload=0.69 cputime=226.158 memavail=1628852 print_time=5498.510 buffer_time=2.756 print_stall=0 extruder: target=215 temp=215.0 pwm=0.365
Stats 5488.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2989637 bytes_read=1648927 bytes_retransmit=9 bytes_invalid=0 send_seq=87628 receive_seq=87628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=757095 sysload=0.69 cputime=226.216 memavail=1629100 print_time=5499.938 buffer_time=3.183 print_stall=0 extruder: target=215 temp=214.8 pwm=0.599
Stats 5489.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2989932 bytes_read=1649299 bytes_retransmit=9 bytes_invalid=0 send_seq=87645 receive_seq=87645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.678 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=757095 sysload=0.69 cputime=226.267 memavail=1628792 print_time=5499.938 buffer_time=2.182 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 5490.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2990642 bytes_read=1649726 bytes_retransmit=9 bytes_invalid=0 send_seq=87667 receive_seq=87667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.517 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=757156 sysload=0.69 cputime=226.302 memavail=1628784 print_time=5501.376 buffer_time=2.620 print_stall=0 extruder: target=215 temp=214.9 pwm=0.446
Stats 5491.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=2991375 bytes_read=1650147 bytes_retransmit=9 bytes_invalid=0 send_seq=87691 receive_seq=87691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.586 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=757219 sysload=0.69 cputime=226.360 memavail=1628992 print_time=5502.822 buffer_time=3.066 print_stall=0 extruder: target=215 temp=214.8 pwm=0.561
Stats 5492.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2991607 bytes_read=1650529 bytes_retransmit=9 bytes_invalid=0 send_seq=87707 receive_seq=87707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=757219 sysload=0.80 cputime=226.411 memavail=1628984 print_time=5502.822 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 5493.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2992298 bytes_read=1650961 bytes_retransmit=9 bytes_invalid=0 send_seq=87730 receive_seq=87730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=757280 sysload=0.80 cputime=226.470 memavail=1628988 print_time=5504.275 buffer_time=2.518 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 5494.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2993017 bytes_read=1651382 bytes_retransmit=9 bytes_invalid=0 send_seq=87754 receive_seq=87754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=757344 sysload=0.80 cputime=226.507 memavail=1629048 print_time=5505.735 buffer_time=2.977 print_stall=0 extruder: target=215 temp=214.9 pwm=0.449
Stats 5495.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2993596 bytes_read=1651769 bytes_retransmit=9 bytes_invalid=0 send_seq=87774 receive_seq=87774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=757406 sysload=0.80 cputime=226.562 memavail=1629048 print_time=5507.203 buffer_time=3.444 print_stall=0 extruder: target=215 temp=214.9 pwm=0.456
Stats 5496.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=2993930 bytes_read=1652176 bytes_retransmit=9 bytes_invalid=0 send_seq=87792 receive_seq=87792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.116 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=757406 sysload=0.80 cputime=226.617 memavail=1628988 print_time=5507.203 buffer_time=2.444 print_stall=0 extruder: target=215 temp=215.0 pwm=0.402
Stats 5497.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2994607 bytes_read=1652607 bytes_retransmit=9 bytes_invalid=0 send_seq=87815 receive_seq=87815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.466 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=757502 sysload=0.89 cputime=226.678 memavail=1628800 print_time=5508.677 buffer_time=2.918 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 5498.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2995251 bytes_read=1653004 bytes_retransmit=9 bytes_invalid=0 send_seq=87837 receive_seq=87837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.069 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=757563 sysload=0.89 cputime=226.734 memavail=1629044 print_time=5510.156 buffer_time=3.395 print_stall=0 extruder: target=215 temp=215.1 pwm=0.372
Stats 5499.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2995553 bytes_read=1653401 bytes_retransmit=9 bytes_invalid=0 send_seq=87853 receive_seq=87853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.207 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=757563 sysload=0.89 cputime=226.788 memavail=1628824 print_time=5510.156 buffer_time=2.395 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 5500.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2996292 bytes_read=1653827 bytes_retransmit=9 bytes_invalid=0 send_seq=87878 receive_seq=87878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=757625 sysload=0.89 cputime=226.846 memavail=1628824 print_time=5511.634 buffer_time=2.873 print_stall=0 extruder: target=215 temp=214.8 pwm=0.575
Stats 5501.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=2996935 bytes_read=1654219 bytes_retransmit=9 bytes_invalid=0 send_seq=87899 receive_seq=87899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=757686 sysload=0.89 cputime=226.900 memavail=1628764 print_time=5513.113 buffer_time=3.352 print_stall=0 extruder: target=215 temp=214.9 pwm=0.560
Stats 5502.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2997479 bytes_read=1654651 bytes_retransmit=9 bytes_invalid=0 send_seq=87919 receive_seq=87919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=757686 sysload=0.90 cputime=226.958 memavail=1628756 print_time=5513.113 buffer_time=2.351 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 5503.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2998185 bytes_read=1655078 bytes_retransmit=9 bytes_invalid=0 send_seq=87942 receive_seq=87942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=757749 sysload=0.90 cputime=227.013 memavail=1628824 print_time=5514.592 buffer_time=2.829 print_stall=0 extruder: target=215 temp=214.9 pwm=0.485
Stats 5504.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2998804 bytes_read=1655465 bytes_retransmit=9 bytes_invalid=0 send_seq=87962 receive_seq=87962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=757811 sysload=0.90 cputime=227.068 memavail=1628824 print_time=5516.071 buffer_time=3.308 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 5505.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2999096 bytes_read=1655867 bytes_retransmit=9 bytes_invalid=0 send_seq=87979 receive_seq=87979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.477 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=757811 sysload=0.90 cputime=227.119 memavail=1629008 print_time=5516.071 buffer_time=2.307 print_stall=0 extruder: target=215 temp=214.7 pwm=0.631
Stats 5506.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000041 bytes_write=2999799 bytes_read=1656278 bytes_retransmit=9 bytes_invalid=0 send_seq=88001 receive_seq=88001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.602 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=757907 sysload=0.90 cputime=227.177 memavail=1629024 print_time=5517.549 buffer_time=2.785 print_stall=0 extruder: target=215 temp=215.1 pwm=0.309
Stats 5507.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=3000416 bytes_read=1656680 bytes_retransmit=9 bytes_invalid=0 send_seq=88021 receive_seq=88021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.403 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=757971 sysload=0.99 cputime=227.232 memavail=1628836 print_time=5519.026 buffer_time=3.261 print_stall=0 extruder: target=215 temp=214.8 pwm=0.575
Stats 5508.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=3000694 bytes_read=1657082 bytes_retransmit=9 bytes_invalid=0 send_seq=88038 receive_seq=88038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.784 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=757971 sysload=0.99 cputime=227.284 memavail=1629080 print_time=5519.026 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.0 pwm=0.390
Stats 5509.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=3001385 bytes_read=1657488 bytes_retransmit=9 bytes_invalid=0 send_seq=88059 receive_seq=88059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=758037 sysload=0.99 cputime=227.341 memavail=1629028 print_time=5520.496 buffer_time=2.730 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 5510.0: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000059 bytes_write=3002019 bytes_read=1657870 bytes_retransmit=9 bytes_invalid=0 send_seq=88078 receive_seq=88078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=758099 sysload=0.99 cputime=227.396 memavail=1629020 print_time=5521.959 buffer_time=3.192 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 5511.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3002311 bytes_read=1658301 bytes_retransmit=9 bytes_invalid=0 send_seq=88095 receive_seq=88095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.284 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=758099 sysload=0.99 cputime=227.451 memavail=1629028 print_time=5521.959 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 5512.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3003003 bytes_read=1658698 bytes_retransmit=9 bytes_invalid=0 send_seq=88117 receive_seq=88117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.368 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=758163 sysload=1.15 cputime=227.487 memavail=1628964 print_time=5523.415 buffer_time=2.646 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 5513.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3003638 bytes_read=1659080 bytes_retransmit=9 bytes_invalid=0 send_seq=88136 receive_seq=88136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=758227 sysload=1.15 cputime=227.543 memavail=1628912 print_time=5524.864 buffer_time=3.094 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 5514.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3003868 bytes_read=1659486 bytes_retransmit=9 bytes_invalid=0 send_seq=88151 receive_seq=88151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=758227 sysload=1.15 cputime=227.581 memavail=1628908 print_time=5524.864 buffer_time=2.094 print_stall=0 extruder: target=215 temp=214.7 pwm=0.579
Stats 5515.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3004573 bytes_read=1659898 bytes_retransmit=9 bytes_invalid=0 send_seq=88176 receive_seq=88176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=758325 sysload=1.15 cputime=227.637 memavail=1628656 print_time=5526.305 buffer_time=2.534 print_stall=0 extruder: target=215 temp=215.2 pwm=0.246
Stats 5516.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3005223 bytes_read=1660280 bytes_retransmit=9 bytes_invalid=0 send_seq=88195 receive_seq=88195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.044 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=758389 sysload=1.15 cputime=227.694 memavail=1628976 print_time=5527.738 buffer_time=2.967 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 5517.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3005837 bytes_read=1660731 bytes_retransmit=9 bytes_invalid=0 send_seq=88216 receive_seq=88216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.512 rpi: temp=54.5 mcu_temp: temp=43.1 sd_pos=758454 sysload=1.14 cputime=227.751 memavail=1628656 print_time=5529.157 buffer_time=3.385 print_stall=0 extruder: target=215 temp=215.1 pwm=0.332
Stats 5518.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3006164 bytes_read=1661103 bytes_retransmit=9 bytes_invalid=0 send_seq=88233 receive_seq=88233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=758454 sysload=1.14 cputime=227.804 memavail=1628724 print_time=5529.157 buffer_time=2.384 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 5519.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3006820 bytes_read=1661485 bytes_retransmit=9 bytes_invalid=0 send_seq=88252 receive_seq=88252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.304 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=758516 sysload=1.14 cputime=227.860 memavail=1628724 print_time=5530.561 buffer_time=2.788 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 5520.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3007445 bytes_read=1661906 bytes_retransmit=9 bytes_invalid=0 send_seq=88270 receive_seq=88270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.147 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=758581 sysload=1.14 cputime=227.917 memavail=1628652 print_time=5531.950 buffer_time=3.176 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 5521.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3007712 bytes_read=1662268 bytes_retransmit=9 bytes_invalid=0 send_seq=88285 receive_seq=88285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.272 rpi: temp=56.5 mcu_temp: temp=43.3 sd_pos=758581 sysload=1.14 cputime=227.966 memavail=1628660 print_time=5531.950 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.0 pwm=0.427
Stats 5522.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3008393 bytes_read=1662675 bytes_retransmit=9 bytes_invalid=0 send_seq=88306 receive_seq=88306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=758644 sysload=1.13 cputime=228.022 memavail=1628340 print_time=5533.325 buffer_time=2.549 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 5523.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3009052 bytes_read=1663106 bytes_retransmit=9 bytes_invalid=0 send_seq=88326 receive_seq=88326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=758741 sysload=1.13 cputime=228.079 memavail=1628796 print_time=5534.685 buffer_time=2.909 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 5524.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3009646 bytes_read=1663498 bytes_retransmit=9 bytes_invalid=0 send_seq=88347 receive_seq=88347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.621 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=758805 sysload=1.13 cputime=228.119 memavail=1628352 print_time=5536.026 buffer_time=3.249 print_stall=0 extruder: target=215 temp=214.9 pwm=0.558
Stats 5525.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3009951 bytes_read=1663875 bytes_retransmit=9 bytes_invalid=0 send_seq=88362 receive_seq=88362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=54.5 mcu_temp: temp=42.5 sd_pos=758805 sysload=1.13 cputime=228.174 memavail=1628664 print_time=5536.026 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 5526.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3010603 bytes_read=1664286 bytes_retransmit=9 bytes_invalid=0 send_seq=88381 receive_seq=88381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=758871 sysload=1.13 cputime=228.229 memavail=1628656 print_time=5537.346 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 5527.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3011261 bytes_read=1664698 bytes_retransmit=9 bytes_invalid=0 send_seq=88403 receive_seq=88403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.464 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=758934 sysload=1.12 cputime=228.286 memavail=1628608 print_time=5538.642 buffer_time=2.862 print_stall=0 extruder: target=215 temp=215.2 pwm=0.340
Stats 5528.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3011787 bytes_read=1665090 bytes_retransmit=9 bytes_invalid=0 send_seq=88421 receive_seq=88421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=758966 sysload=1.12 cputime=228.343 memavail=1628660 print_time=5539.678 buffer_time=2.898 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 5529.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3012123 bytes_read=1665486 bytes_retransmit=9 bytes_invalid=0 send_seq=88437 receive_seq=88437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=758998 sysload=1.12 cputime=228.397 memavail=1628920 print_time=5539.914 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.2 pwm=0.452
Stats 5530.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3012803 bytes_read=1665888 bytes_retransmit=9 bytes_invalid=0 send_seq=88460 receive_seq=88460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=759061 sysload=1.12 cputime=228.454 memavail=1629232 print_time=5541.163 buffer_time=2.383 print_stall=0 extruder: target=215 temp=215.2 pwm=0.432
Stats 5531.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3013441 bytes_read=1666285 bytes_retransmit=9 bytes_invalid=0 send_seq=88479 receive_seq=88479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=759126 sysload=1.12 cputime=228.510 memavail=1629484 print_time=5542.389 buffer_time=2.608 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 5532.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3014071 bytes_read=1666711 bytes_retransmit=9 bytes_invalid=0 send_seq=88498 receive_seq=88498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.480 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=759188 sysload=1.11 cputime=228.566 memavail=1629784 print_time=5543.582 buffer_time=2.801 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 5533.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3014688 bytes_read=1667098 bytes_retransmit=9 bytes_invalid=0 send_seq=88518 receive_seq=88518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.416 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=759254 sysload=1.11 cputime=228.618 memavail=1629792 print_time=5544.741 buffer_time=2.959 print_stall=0 extruder: target=215 temp=215.1 pwm=0.497
Stats 5534.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3015331 bytes_read=1667505 bytes_retransmit=9 bytes_invalid=0 send_seq=88539 receive_seq=88539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=759318 sysload=1.11 cputime=228.674 memavail=1629736 print_time=5545.866 buffer_time=3.083 print_stall=0 extruder: target=215 temp=215.1 pwm=0.543
Stats 5535.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3015593 bytes_read=1667891 bytes_retransmit=9 bytes_invalid=0 send_seq=88553 receive_seq=88553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.083 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=759318 sysload=1.11 cputime=228.726 memavail=1629696 print_time=5545.866 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.2 pwm=0.412
Stats 5536.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3016244 bytes_read=1668293 bytes_retransmit=9 bytes_invalid=0 send_seq=88576 receive_seq=88576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=759413 sysload=1.11 cputime=228.779 memavail=1629704 print_time=5546.956 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 5537.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3016832 bytes_read=1668705 bytes_retransmit=9 bytes_invalid=0 send_seq=88595 receive_seq=88595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=759478 sysload=1.10 cputime=228.834 memavail=1629448 print_time=5548.009 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.2 pwm=0.398
Stats 5538.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3017412 bytes_read=1669112 bytes_retransmit=9 bytes_invalid=0 send_seq=88614 receive_seq=88614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=759544 sysload=1.10 cputime=228.888 memavail=1629704 print_time=5549.016 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 5539.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3018028 bytes_read=1669503 bytes_retransmit=9 bytes_invalid=0 send_seq=88637 receive_seq=88637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=759610 sysload=1.10 cputime=228.942 memavail=1629704 print_time=5549.976 buffer_time=2.190 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 5540.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3018586 bytes_read=1669884 bytes_retransmit=9 bytes_invalid=0 send_seq=88655 receive_seq=88655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=759709 sysload=1.10 cputime=229.000 memavail=1629680 print_time=5550.917 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 5541.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3019491 bytes_read=1670318 bytes_retransmit=9 bytes_invalid=0 send_seq=88681 receive_seq=88681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.658 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=759840 sysload=1.10 cputime=229.059 memavail=1629760 print_time=5552.538 buffer_time=2.751 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 5542.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3020115 bytes_read=1670716 bytes_retransmit=9 bytes_invalid=0 send_seq=88701 receive_seq=88701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=759937 sysload=1.17 cputime=229.112 memavail=1630012 print_time=5553.303 buffer_time=2.515 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 5543.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3020663 bytes_read=1671108 bytes_retransmit=9 bytes_invalid=0 send_seq=88719 receive_seq=88719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=760000 sysload=1.17 cputime=229.167 memavail=1629956 print_time=5553.911 buffer_time=2.123 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 5544.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3021707 bytes_read=1671554 bytes_retransmit=9 bytes_invalid=0 send_seq=88745 receive_seq=88745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=760302 sysload=1.17 cputime=229.209 memavail=1629696 print_time=5555.039 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 5545.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3022536 bytes_read=1671961 bytes_retransmit=9 bytes_invalid=0 send_seq=88769 receive_seq=88769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=760664 sysload=1.17 cputime=229.266 memavail=1629704 print_time=5555.834 buffer_time=2.045 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 5546.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3023172 bytes_read=1672368 bytes_retransmit=9 bytes_invalid=0 send_seq=88790 receive_seq=88790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=760951 sysload=1.17 cputime=229.329 memavail=1630212 print_time=5556.856 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 5547.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3023949 bytes_read=1672809 bytes_retransmit=9 bytes_invalid=0 send_seq=88812 receive_seq=88812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=761361 sysload=1.24 cputime=229.394 memavail=1629960 print_time=5558.133 buffer_time=2.343 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 5548.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3024565 bytes_read=1673201 bytes_retransmit=9 bytes_invalid=0 send_seq=88833 receive_seq=88833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.048 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=761657 sysload=1.24 cputime=229.457 memavail=1629944 print_time=5559.155 buffer_time=2.365 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 5549.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3025186 bytes_read=1673593 bytes_retransmit=9 bytes_invalid=0 send_seq=88851 receive_seq=88851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.195 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=761952 sysload=1.24 cputime=229.518 memavail=1629712 print_time=5559.976 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 5550.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3026074 bytes_read=1674029 bytes_retransmit=9 bytes_invalid=0 send_seq=88875 receive_seq=88875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=762269 sysload=1.24 cputime=229.580 memavail=1629712 print_time=5560.878 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.1 pwm=0.364
Stats 5551.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3026783 bytes_read=1674431 bytes_retransmit=9 bytes_invalid=0 send_seq=88898 receive_seq=88898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=762585 sysload=1.24 cputime=229.644 memavail=1629712 print_time=5561.927 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 5552.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3027462 bytes_read=1674853 bytes_retransmit=9 bytes_invalid=0 send_seq=88919 receive_seq=88919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=762838 sysload=1.14 cputime=229.705 memavail=1629704 print_time=5562.844 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 5553.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3028149 bytes_read=1675274 bytes_retransmit=9 bytes_invalid=0 send_seq=88940 receive_seq=88940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=763133 sysload=1.14 cputime=229.768 memavail=1629460 print_time=5563.893 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 5554.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3029068 bytes_read=1675696 bytes_retransmit=9 bytes_invalid=0 send_seq=88967 receive_seq=88967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=763528 sysload=1.14 cputime=229.812 memavail=1628716 print_time=5564.878 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 5555.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3029664 bytes_read=1676088 bytes_retransmit=9 bytes_invalid=0 send_seq=88985 receive_seq=88985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=763813 sysload=1.14 cputime=229.874 memavail=1629224 print_time=5566.132 buffer_time=2.335 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 5556.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3030205 bytes_read=1676494 bytes_retransmit=9 bytes_invalid=0 send_seq=89003 receive_seq=89003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.058 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=763967 sysload=1.14 cputime=229.928 memavail=1629224 print_time=5566.951 buffer_time=2.154 print_stall=0 extruder: target=215 temp=215.1 pwm=0.409
Stats 5557.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3030821 bytes_read=1676901 bytes_retransmit=9 bytes_invalid=0 send_seq=89024 receive_seq=89024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.269 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=764221 sysload=1.05 cputime=229.989 memavail=1629476 print_time=5568.102 buffer_time=2.304 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 5558.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3031336 bytes_read=1677298 bytes_retransmit=9 bytes_invalid=0 send_seq=89043 receive_seq=89043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.185 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=764444 sysload=1.05 cputime=230.048 memavail=1629476 print_time=5568.998 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 5559.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3032003 bytes_read=1677714 bytes_retransmit=9 bytes_invalid=0 send_seq=89063 receive_seq=89063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=764670 sysload=1.05 cputime=230.108 memavail=1629728 print_time=5570.176 buffer_time=2.376 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 5560.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3032710 bytes_read=1678116 bytes_retransmit=9 bytes_invalid=0 send_seq=89086 receive_seq=89086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=764969 sysload=1.05 cputime=230.172 memavail=1629472 print_time=5571.241 buffer_time=2.441 print_stall=0 extruder: target=215 temp=214.8 pwm=0.621
Stats 5561.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3033618 bytes_read=1678568 bytes_retransmit=9 bytes_invalid=0 send_seq=89113 receive_seq=89113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.034 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=765096 sysload=1.05 cputime=230.233 memavail=1629472 print_time=5571.894 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 5562.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3034512 bytes_read=1678999 bytes_retransmit=9 bytes_invalid=0 send_seq=89136 receive_seq=89136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=765254 sysload=0.96 cputime=230.294 memavail=1629728 print_time=5573.162 buffer_time=2.360 print_stall=0 extruder: target=215 temp=214.9 pwm=0.592
Stats 5563.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3035177 bytes_read=1679406 bytes_retransmit=9 bytes_invalid=0 send_seq=89161 receive_seq=89160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=765317 sysload=0.96 cputime=230.351 memavail=1629224 print_time=5573.902 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.2 pwm=0.316
Stats 5564.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3036089 bytes_read=1679849 bytes_retransmit=9 bytes_invalid=0 send_seq=89186 receive_seq=89186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.715 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=765477 sysload=0.96 cputime=230.395 memavail=1629276 print_time=5575.593 buffer_time=2.789 print_stall=0 extruder: target=215 temp=215.1 pwm=0.417
Stats 5565.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3036677 bytes_read=1680265 bytes_retransmit=9 bytes_invalid=0 send_seq=89206 receive_seq=89206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=765541 sysload=0.96 cputime=230.453 memavail=1629268 print_time=5576.514 buffer_time=2.709 print_stall=0 extruder: target=215 temp=215.2 pwm=0.381
Stats 5566.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3037301 bytes_read=1680662 bytes_retransmit=9 bytes_invalid=0 send_seq=89228 receive_seq=89228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.481 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=765604 sysload=0.96 cputime=230.509 memavail=1629276 print_time=5577.483 buffer_time=2.678 print_stall=0 extruder: target=215 temp=214.8 pwm=0.631
Stats 5567.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3037872 bytes_read=1681074 bytes_retransmit=9 bytes_invalid=0 send_seq=89247 receive_seq=89247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=765695 sysload=0.89 cputime=230.565 memavail=1629276 print_time=5578.501 buffer_time=2.696 print_stall=0 extruder: target=215 temp=214.8 pwm=0.516
Stats 5568.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3038518 bytes_read=1681500 bytes_retransmit=9 bytes_invalid=0 send_seq=89269 receive_seq=89269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=765760 sysload=0.89 cputime=230.622 memavail=1629024 print_time=5579.566 buffer_time=2.760 print_stall=0 extruder: target=215 temp=215.2 pwm=0.399
Stats 5569.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3039063 bytes_read=1681877 bytes_retransmit=9 bytes_invalid=0 send_seq=89287 receive_seq=89287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.108 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=765823 sysload=0.89 cputime=230.677 memavail=1629024 print_time=5580.663 buffer_time=2.856 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 5570.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3039688 bytes_read=1682294 bytes_retransmit=9 bytes_invalid=0 send_seq=89307 receive_seq=89307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=765889 sysload=0.89 cputime=230.736 memavail=1629032 print_time=5581.793 buffer_time=2.986 print_stall=0 extruder: target=215 temp=215.3 pwm=0.272
Stats 5571.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3040343 bytes_read=1682705 bytes_retransmit=9 bytes_invalid=0 send_seq=89329 receive_seq=89329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=765952 sysload=0.89 cputime=230.793 memavail=1629024 print_time=5582.957 buffer_time=3.150 print_stall=0 extruder: target=215 temp=215.0 pwm=0.432
Stats 5572.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3040641 bytes_read=1683092 bytes_retransmit=9 bytes_invalid=0 send_seq=89346 receive_seq=89346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=765952 sysload=0.81 cputime=230.846 memavail=1629272 print_time=5582.957 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.2 pwm=0.338
Stats 5573.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3041271 bytes_read=1683509 bytes_retransmit=9 bytes_invalid=0 send_seq=89366 receive_seq=89366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=766050 sysload=0.81 cputime=230.902 memavail=1629532 print_time=5584.156 buffer_time=2.347 print_stall=0 extruder: target=215 temp=215.3 pwm=0.304
Stats 5574.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3041914 bytes_read=1683915 bytes_retransmit=9 bytes_invalid=0 send_seq=89387 receive_seq=89387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=766113 sysload=0.81 cputime=230.955 memavail=1629852 print_time=5585.384 buffer_time=2.575 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 5575.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3042576 bytes_read=1684307 bytes_retransmit=9 bytes_invalid=0 send_seq=89408 receive_seq=89408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.097 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=766178 sysload=0.81 cputime=231.010 memavail=1629868 print_time=5586.635 buffer_time=2.824 print_stall=0 extruder: target=215 temp=215.2 pwm=0.322
Stats 5576.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3043177 bytes_read=1684724 bytes_retransmit=9 bytes_invalid=0 send_seq=89428 receive_seq=89428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=766240 sysload=0.81 cputime=231.066 memavail=1629876 print_time=5587.910 buffer_time=3.098 print_stall=0 extruder: target=215 temp=214.9 pwm=0.613
Stats 5577.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3043448 bytes_read=1685115 bytes_retransmit=9 bytes_invalid=0 send_seq=89443 receive_seq=89443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=766240 sysload=0.75 cputime=231.118 memavail=1630116 print_time=5587.910 buffer_time=2.098 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 5578.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3044143 bytes_read=1685512 bytes_retransmit=9 bytes_invalid=0 send_seq=89465 receive_seq=89465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.433 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=766306 sysload=0.75 cputime=231.174 memavail=1629848 print_time=5589.208 buffer_time=2.395 print_stall=0 extruder: target=215 temp=215.1 pwm=0.504
Stats 5579.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3044774 bytes_read=1685924 bytes_retransmit=9 bytes_invalid=0 send_seq=89484 receive_seq=89484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.8 pwm=0.926 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=766400 sysload=0.75 cputime=231.232 memavail=1629808 print_time=5590.529 buffer_time=2.716 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 5580.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3045389 bytes_read=1686325 bytes_retransmit=9 bytes_invalid=0 send_seq=89504 receive_seq=89504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=766464 sysload=0.75 cputime=231.290 memavail=1629556 print_time=5591.875 buffer_time=3.061 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 5581.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3045621 bytes_read=1686692 bytes_retransmit=9 bytes_invalid=0 send_seq=89520 receive_seq=89520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=766464 sysload=0.75 cputime=231.342 memavail=1629556 print_time=5591.875 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 5582.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3046280 bytes_read=1687129 bytes_retransmit=9 bytes_invalid=0 send_seq=89541 receive_seq=89541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=766528 sysload=0.69 cputime=231.401 memavail=1629564 print_time=5593.234 buffer_time=2.418 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 5583.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3046969 bytes_read=1687545 bytes_retransmit=9 bytes_invalid=0 send_seq=89564 receive_seq=89564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=766593 sysload=0.69 cputime=231.460 memavail=1629556 print_time=5594.608 buffer_time=2.791 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 5584.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3047507 bytes_read=1687922 bytes_retransmit=9 bytes_invalid=0 send_seq=89582 receive_seq=89582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=766654 sysload=0.69 cputime=231.515 memavail=1629292 print_time=5595.996 buffer_time=3.178 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 5585.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3047811 bytes_read=1688319 bytes_retransmit=9 bytes_invalid=0 send_seq=89598 receive_seq=89598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=766654 sysload=0.69 cputime=231.567 memavail=1629620 print_time=5595.996 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.391
Stats 5586.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3048520 bytes_read=1688735 bytes_retransmit=9 bytes_invalid=0 send_seq=89621 receive_seq=89621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=766718 sysload=0.69 cputime=231.623 memavail=1629608 print_time=5597.399 buffer_time=2.580 print_stall=0 extruder: target=215 temp=215.2 pwm=0.334
Stats 5587.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3049150 bytes_read=1689137 bytes_retransmit=9 bytes_invalid=0 send_seq=89641 receive_seq=89641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=766813 sysload=0.63 cputime=231.675 memavail=1629872 print_time=5598.817 buffer_time=2.997 print_stall=0 extruder: target=215 temp=215.1 pwm=0.493
Stats 5588.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3049727 bytes_read=1689554 bytes_retransmit=9 bytes_invalid=0 send_seq=89662 receive_seq=89661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=766878 sysload=0.63 cputime=231.731 memavail=1630132 print_time=5600.247 buffer_time=3.426 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 5589.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3050023 bytes_read=1689935 bytes_retransmit=9 bytes_invalid=0 send_seq=89677 receive_seq=89677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=766878 sysload=0.63 cputime=231.785 memavail=1630376 print_time=5600.247 buffer_time=2.426 print_stall=0 extruder: target=215 temp=214.8 pwm=0.672
Stats 5590.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3050686 bytes_read=1690327 bytes_retransmit=9 bytes_invalid=0 send_seq=89698 receive_seq=89698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=766941 sysload=0.63 cputime=231.841 memavail=1630344 print_time=5601.685 buffer_time=2.863 print_stall=0 extruder: target=215 temp=215.0 pwm=0.524
Stats 5591.0: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3051248 bytes_read=1690744 bytes_retransmit=9 bytes_invalid=0 send_seq=89718 receive_seq=89718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.524 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=767007 sysload=0.63 cputime=231.899 memavail=1630456 print_time=5603.129 buffer_time=3.306 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 5592.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3051572 bytes_read=1691140 bytes_retransmit=9 bytes_invalid=0 send_seq=89734 receive_seq=89734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=767007 sysload=0.58 cputime=231.952 memavail=1630472 print_time=5603.129 buffer_time=2.306 print_stall=0 extruder: target=215 temp=214.7 pwm=0.644
Stats 5593.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3052257 bytes_read=1691537 bytes_retransmit=9 bytes_invalid=0 send_seq=89756 receive_seq=89756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.098 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=767071 sysload=0.58 cputime=232.008 memavail=1630428 print_time=5604.581 buffer_time=2.757 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 5594.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3052909 bytes_read=1691964 bytes_retransmit=9 bytes_invalid=0 send_seq=89778 receive_seq=89778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=767137 sysload=0.58 cputime=232.047 memavail=1629448 print_time=5606.040 buffer_time=3.216 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 5595.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3053129 bytes_read=1692335 bytes_retransmit=9 bytes_invalid=0 send_seq=89792 receive_seq=89792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=767137 sysload=0.58 cputime=232.098 memavail=1629640 print_time=5606.040 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 5596.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3053793 bytes_read=1692722 bytes_retransmit=9 bytes_invalid=0 send_seq=89812 receive_seq=89812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=767232 sysload=0.58 cputime=232.150 memavail=1629636 print_time=5607.506 buffer_time=2.681 print_stall=0 extruder: target=215 temp=214.9 pwm=0.478
Stats 5597.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3054470 bytes_read=1693159 bytes_retransmit=9 bytes_invalid=0 send_seq=89833 receive_seq=89833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=767296 sysload=0.54 cputime=232.212 memavail=1629616 print_time=5608.978 buffer_time=3.151 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5598.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3054711 bytes_read=1693527 bytes_retransmit=9 bytes_invalid=0 send_seq=89848 receive_seq=89848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=767296 sysload=0.54 cputime=232.264 memavail=1629648 print_time=5608.978 buffer_time=2.151 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 5599.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3055395 bytes_read=1693914 bytes_retransmit=9 bytes_invalid=0 send_seq=89870 receive_seq=89870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=767359 sysload=0.54 cputime=232.326 memavail=1629616 print_time=5610.449 buffer_time=2.622 print_stall=0 extruder: target=215 temp=214.8 pwm=0.560
Stats 5600.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3056066 bytes_read=1694329 bytes_retransmit=9 bytes_invalid=0 send_seq=89892 receive_seq=89892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=767424 sysload=0.54 cputime=232.383 memavail=1629664 print_time=5611.921 buffer_time=3.093 print_stall=0 extruder: target=215 temp=214.8 pwm=0.545
Stats 5601.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3056297 bytes_read=1694694 bytes_retransmit=9 bytes_invalid=0 send_seq=89907 receive_seq=89907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.613 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=767424 sysload=0.54 cputime=232.436 memavail=1629660 print_time=5611.921 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.7 pwm=0.691
Stats 5602.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3056988 bytes_read=1695111 bytes_retransmit=9 bytes_invalid=0 send_seq=89930 receive_seq=89930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=767486 sysload=0.49 cputime=232.495 memavail=1629652 print_time=5613.393 buffer_time=2.564 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 5603.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3057661 bytes_read=1695538 bytes_retransmit=9 bytes_invalid=0 send_seq=89952 receive_seq=89952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=767552 sysload=0.49 cputime=232.554 memavail=1629660 print_time=5614.864 buffer_time=3.034 print_stall=0 extruder: target=215 temp=215.0 pwm=0.374
Stats 5604.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3057904 bytes_read=1695919 bytes_retransmit=9 bytes_invalid=0 send_seq=89968 receive_seq=89968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=767552 sysload=0.49 cputime=232.589 memavail=1629876 print_time=5614.864 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.1 pwm=0.332
Stats 5605.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3058591 bytes_read=1696316 bytes_retransmit=9 bytes_invalid=0 send_seq=89990 receive_seq=89990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=767648 sysload=0.49 cputime=232.646 memavail=1630164 print_time=5616.336 buffer_time=2.505 print_stall=0 extruder: target=215 temp=215.1 pwm=0.345
Stats 5606.0: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3059314 bytes_read=1696753 bytes_retransmit=9 bytes_invalid=0 send_seq=90014 receive_seq=90014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=767714 sysload=0.49 cputime=232.703 memavail=1630160 print_time=5617.809 buffer_time=2.977 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 5607.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3059916 bytes_read=1697174 bytes_retransmit=9 bytes_invalid=0 send_seq=90035 receive_seq=90035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.214 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=767777 sysload=0.45 cputime=232.759 memavail=1630412 print_time=5619.273 buffer_time=3.440 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 5608.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3060220 bytes_read=1697541 bytes_retransmit=9 bytes_invalid=0 send_seq=90051 receive_seq=90051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.426 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=767777 sysload=0.45 cputime=232.811 memavail=1630140 print_time=5619.273 buffer_time=2.439 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 5609.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3060899 bytes_read=1697968 bytes_retransmit=9 bytes_invalid=0 send_seq=90073 receive_seq=90073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=767841 sysload=0.45 cputime=232.868 memavail=1630176 print_time=5620.730 buffer_time=2.896 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 5610.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3061499 bytes_read=1698379 bytes_retransmit=9 bytes_invalid=0 send_seq=90095 receive_seq=90095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.129 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=767904 sysload=0.45 cputime=232.926 memavail=1630168 print_time=5622.180 buffer_time=3.346 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 5611.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3061789 bytes_read=1698746 bytes_retransmit=9 bytes_invalid=0 send_seq=90111 receive_seq=90111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.118 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=767904 sysload=0.45 cputime=232.980 memavail=1630160 print_time=5622.180 buffer_time=2.345 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 5612.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3062505 bytes_read=1699198 bytes_retransmit=9 bytes_invalid=0 send_seq=90135 receive_seq=90135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=767968 sysload=0.42 cputime=233.038 memavail=1630444 print_time=5623.623 buffer_time=2.788 print_stall=0 extruder: target=215 temp=215.2 pwm=0.341
Stats 5613.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3063142 bytes_read=1699604 bytes_retransmit=9 bytes_invalid=0 send_seq=90156 receive_seq=90156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.368 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=768032 sysload=0.42 cputime=233.096 memavail=1630420 print_time=5625.059 buffer_time=3.223 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 5614.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3063430 bytes_read=1699971 bytes_retransmit=9 bytes_invalid=0 send_seq=90172 receive_seq=90172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.403 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=768032 sysload=0.42 cputime=233.132 memavail=1630420 print_time=5625.059 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 5615.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3064125 bytes_read=1700403 bytes_retransmit=9 bytes_invalid=0 send_seq=90195 receive_seq=90195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.185 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=768097 sysload=0.42 cputime=233.189 memavail=1629916 print_time=5626.487 buffer_time=2.650 print_stall=0 extruder: target=215 temp=215.4 pwm=0.232
Stats 5616.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3064811 bytes_read=1700824 bytes_retransmit=9 bytes_invalid=0 send_seq=90219 receive_seq=90219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=768160 sysload=0.42 cputime=233.248 memavail=1629624 print_time=5627.901 buffer_time=3.063 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 5617.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3065011 bytes_read=1701196 bytes_retransmit=9 bytes_invalid=0 send_seq=90233 receive_seq=90233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=768160 sysload=0.38 cputime=233.300 memavail=1629660 print_time=5627.901 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 5618.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3065680 bytes_read=1701618 bytes_retransmit=9 bytes_invalid=0 send_seq=90254 receive_seq=90254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=768226 sysload=0.38 cputime=233.359 memavail=1629668 print_time=5629.301 buffer_time=2.461 print_stall=0 extruder: target=215 temp=215.1 pwm=0.397
Stats 5619.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3066359 bytes_read=1702039 bytes_retransmit=9 bytes_invalid=0 send_seq=90278 receive_seq=90278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.040 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=768290 sysload=0.38 cputime=233.418 memavail=1629660 print_time=5630.685 buffer_time=2.844 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 5620.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3066917 bytes_read=1702421 bytes_retransmit=9 bytes_invalid=0 send_seq=90297 receive_seq=90297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=768354 sysload=0.38 cputime=233.474 memavail=1630188 print_time=5632.055 buffer_time=3.213 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 5621.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3067226 bytes_read=1702818 bytes_retransmit=9 bytes_invalid=0 send_seq=90313 receive_seq=90313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.543 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=768354 sysload=0.38 cputime=233.530 memavail=1630164 print_time=5632.055 buffer_time=2.212 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 5622.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3067912 bytes_read=1703244 bytes_retransmit=9 bytes_invalid=0 send_seq=90335 receive_seq=90335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=768446 sysload=0.35 cputime=233.568 memavail=1629908 print_time=5633.409 buffer_time=2.566 print_stall=0 extruder: target=215 temp=215.1 pwm=0.436
Stats 5623.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3068570 bytes_read=1703641 bytes_retransmit=9 bytes_invalid=0 send_seq=90357 receive_seq=90357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.005 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=768510 sysload=0.35 cputime=233.625 memavail=1629892 print_time=5634.747 buffer_time=2.903 print_stall=0 extruder: target=215 temp=215.2 pwm=0.358
Stats 5624.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3069143 bytes_read=1704064 bytes_retransmit=9 bytes_invalid=0 send_seq=90376 receive_seq=90376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=768572 sysload=0.35 cputime=233.680 memavail=1629692 print_time=5636.062 buffer_time=3.218 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 5625.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3069427 bytes_read=1704450 bytes_retransmit=9 bytes_invalid=0 send_seq=90393 receive_seq=90393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=768572 sysload=0.35 cputime=233.718 memavail=1629204 print_time=5636.062 buffer_time=2.217 print_stall=0 extruder: target=215 temp=214.9 pwm=0.615
Stats 5626.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000042 bytes_write=3070104 bytes_read=1704847 bytes_retransmit=9 bytes_invalid=0 send_seq=90415 receive_seq=90415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=768636 sysload=0.35 cputime=233.775 memavail=1628960 print_time=5637.354 buffer_time=2.509 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 5627.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3070761 bytes_read=1705289 bytes_retransmit=9 bytes_invalid=0 send_seq=90437 receive_seq=90437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=768700 sysload=0.32 cputime=233.832 memavail=1629464 print_time=5638.623 buffer_time=2.776 print_stall=0 extruder: target=215 temp=215.0 pwm=0.418
Stats 5628.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3071475 bytes_read=1705715 bytes_retransmit=9 bytes_invalid=0 send_seq=90462 receive_seq=90462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=768766 sysload=0.32 cputime=233.888 memavail=1629456 print_time=5639.868 buffer_time=3.020 print_stall=0 extruder: target=215 temp=214.7 pwm=0.645
Stats 5629.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3071679 bytes_read=1706072 bytes_retransmit=9 bytes_invalid=0 send_seq=90476 receive_seq=90476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=768766 sysload=0.32 cputime=233.938 memavail=1629468 print_time=5639.868 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.418
Stats 5630.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3072378 bytes_read=1706504 bytes_retransmit=9 bytes_invalid=0 send_seq=90499 receive_seq=90499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.453 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=768862 sysload=0.32 cputime=233.994 memavail=1629708 print_time=5641.096 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 5631.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3073019 bytes_read=1706910 bytes_retransmit=9 bytes_invalid=0 send_seq=90520 receive_seq=90520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=768928 sysload=0.32 cputime=234.051 memavail=1629460 print_time=5642.278 buffer_time=2.429 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 5632.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3073689 bytes_read=1707327 bytes_retransmit=9 bytes_invalid=0 send_seq=90543 receive_seq=90543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.465 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=768990 sysload=0.30 cputime=234.108 memavail=1629708 print_time=5643.434 buffer_time=2.584 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 5633.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3074316 bytes_read=1707754 bytes_retransmit=9 bytes_invalid=0 send_seq=90565 receive_seq=90565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=769055 sysload=0.30 cputime=234.166 memavail=1629968 print_time=5644.555 buffer_time=2.704 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 5634.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3074954 bytes_read=1708170 bytes_retransmit=9 bytes_invalid=0 send_seq=90588 receive_seq=90588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=769150 sysload=0.30 cputime=234.222 memavail=1629212 print_time=5645.642 buffer_time=2.791 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 5635.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3075565 bytes_read=1708562 bytes_retransmit=9 bytes_invalid=0 send_seq=90609 receive_seq=90609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.172 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=769216 sysload=0.30 cputime=234.278 memavail=1629228 print_time=5646.692 buffer_time=2.839 print_stall=0 extruder: target=215 temp=215.2 pwm=0.328
Stats 5636.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3076099 bytes_read=1708974 bytes_retransmit=9 bytes_invalid=0 send_seq=90628 receive_seq=90628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.546 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=769282 sysload=0.30 cputime=234.335 memavail=1629228 print_time=5647.697 buffer_time=2.844 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 5637.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3076656 bytes_read=1709390 bytes_retransmit=9 bytes_invalid=0 send_seq=90648 receive_seq=90648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=769348 sysload=0.27 cputime=234.390 memavail=1629748 print_time=5648.654 buffer_time=2.800 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 5638.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3077151 bytes_read=1709757 bytes_retransmit=9 bytes_invalid=0 send_seq=90664 receive_seq=90664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=769447 sysload=0.27 cputime=234.443 memavail=1629948 print_time=5649.593 buffer_time=2.739 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 5639.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3077848 bytes_read=1710184 bytes_retransmit=9 bytes_invalid=0 send_seq=90686 receive_seq=90686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.489 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=769513 sysload=0.27 cputime=234.502 memavail=1629984 print_time=5650.418 buffer_time=2.563 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 5640.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3078480 bytes_read=1710605 bytes_retransmit=9 bytes_invalid=0 send_seq=90710 receive_seq=90710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=769578 sysload=0.27 cputime=234.560 memavail=1629992 print_time=5651.210 buffer_time=2.354 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 5641.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3079138 bytes_read=1711002 bytes_retransmit=9 bytes_invalid=0 send_seq=90732 receive_seq=90732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=769677 sysload=0.27 cputime=234.616 memavail=1629736 print_time=5651.973 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.2 pwm=0.377
Stats 5642.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3079999 bytes_read=1711454 bytes_retransmit=9 bytes_invalid=0 send_seq=90756 receive_seq=90756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.642 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=769809 sysload=0.25 cputime=234.675 memavail=1629492 print_time=5653.157 buffer_time=2.300 print_stall=0 extruder: target=215 temp=215.0 pwm=0.524
Stats 5643.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3080937 bytes_read=1711895 bytes_retransmit=9 bytes_invalid=0 send_seq=90784 receive_seq=90784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=769946 sysload=0.25 cputime=234.734 memavail=1629484 print_time=5653.939 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.0 pwm=0.567
Stats 5644.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3082353 bytes_read=1712347 bytes_retransmit=9 bytes_invalid=0 send_seq=90817 receive_seq=90817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=770466 sysload=0.25 cputime=234.778 memavail=1629484 print_time=5655.085 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.3 pwm=0.299
Stats 5645.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3083100 bytes_read=1712764 bytes_retransmit=9 bytes_invalid=0 send_seq=90837 receive_seq=90837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=770754 sysload=0.25 cputime=234.840 memavail=1629240 print_time=5656.102 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.2 pwm=0.398
Stats 5646.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3083782 bytes_read=1713175 bytes_retransmit=9 bytes_invalid=0 send_seq=90859 receive_seq=90859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.022 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=771048 sysload=0.25 cputime=234.899 memavail=1629280 print_time=5656.992 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.588
Stats 5647.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3084472 bytes_read=1713577 bytes_retransmit=9 bytes_invalid=0 send_seq=90879 receive_seq=90879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.027 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=771375 sysload=0.23 cputime=234.961 memavail=1629236 print_time=5658.009 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.0 pwm=0.440
Stats 5648.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3085261 bytes_read=1714014 bytes_retransmit=9 bytes_invalid=0 send_seq=90903 receive_seq=90903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.8 pwm=0.936 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=771763 sysload=0.23 cputime=235.025 memavail=1629544 print_time=5659.238 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 5649.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3086128 bytes_read=1714445 bytes_retransmit=9 bytes_invalid=0 send_seq=90929 receive_seq=90929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=772072 sysload=0.23 cputime=235.088 memavail=1630008 print_time=5660.104 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.1 pwm=0.329
Stats 5650.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3086796 bytes_read=1714832 bytes_retransmit=9 bytes_invalid=0 send_seq=90949 receive_seq=90949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=772322 sysload=0.23 cputime=235.150 memavail=1630040 print_time=5660.931 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.2 pwm=0.326
Stats 5651.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3087535 bytes_read=1715264 bytes_retransmit=9 bytes_invalid=0 send_seq=90972 receive_seq=90972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=772641 sysload=0.23 cputime=235.213 memavail=1630024 print_time=5662.062 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 5652.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3088137 bytes_read=1715670 bytes_retransmit=9 bytes_invalid=0 send_seq=90990 receive_seq=90990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=772929 sysload=0.21 cputime=235.273 memavail=1629772 print_time=5663.106 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.9 pwm=0.553
Stats 5653.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3088789 bytes_read=1716047 bytes_retransmit=9 bytes_invalid=0 send_seq=91008 receive_seq=91008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=773249 sysload=0.21 cputime=235.333 memavail=1629488 print_time=5663.973 buffer_time=2.111 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 5654.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3089596 bytes_read=1716479 bytes_retransmit=9 bytes_invalid=0 send_seq=91031 receive_seq=91031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.128 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=773560 sysload=0.21 cputime=235.396 memavail=1630016 print_time=5665.146 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.3 pwm=0.364
Stats 5655.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3090223 bytes_read=1716880 bytes_retransmit=9 bytes_invalid=0 send_seq=91051 receive_seq=91051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.527 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=773715 sysload=0.21 cputime=235.455 memavail=1630288 print_time=5666.037 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 5656.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3090755 bytes_read=1717257 bytes_retransmit=9 bytes_invalid=0 send_seq=91069 receive_seq=91069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.3 sd_pos=773941 sysload=0.21 cputime=235.516 memavail=1630292 print_time=5666.929 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.591
Stats 5657.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3091378 bytes_read=1717687 bytes_retransmit=9 bytes_invalid=0 send_seq=91089 receive_seq=91089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=774197 sysload=0.20 cputime=235.577 memavail=1630296 print_time=5667.999 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 5658.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3092062 bytes_read=1718086 bytes_retransmit=9 bytes_invalid=0 send_seq=91111 receive_seq=91111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.8 pwm=0.894 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=774424 sysload=0.20 cputime=235.642 memavail=1630248 print_time=5669.247 buffer_time=2.384 print_stall=0 extruder: target=215 temp=215.3 pwm=0.309
Stats 5659.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3092556 bytes_read=1718458 bytes_retransmit=9 bytes_invalid=0 send_seq=91130 receive_seq=91130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=774644 sysload=0.20 cputime=235.701 memavail=1630028 print_time=5670.139 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 5660.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3093588 bytes_read=1718898 bytes_retransmit=9 bytes_invalid=0 send_seq=91157 receive_seq=91157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=774878 sysload=0.20 cputime=235.765 memavail=1629764 print_time=5671.087 buffer_time=2.223 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 5661.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3094602 bytes_read=1719331 bytes_retransmit=9 bytes_invalid=0 send_seq=91185 receive_seq=91185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=775035 sysload=0.20 cputime=235.827 memavail=1629784 print_time=5672.306 buffer_time=2.441 print_stall=0 extruder: target=215 temp=215.0 pwm=0.515
Stats 5662.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3095180 bytes_read=1719733 bytes_retransmit=9 bytes_invalid=0 send_seq=91205 receive_seq=91205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=775098 sysload=0.18 cputime=235.884 memavail=1629760 print_time=5673.010 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.2 pwm=0.457
Stats 5663.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3096050 bytes_read=1720170 bytes_retransmit=9 bytes_invalid=0 send_seq=91229 receive_seq=91229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=775257 sysload=0.18 cputime=235.944 memavail=1629784 print_time=5674.661 buffer_time=2.794 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 5664.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3096709 bytes_read=1720576 bytes_retransmit=9 bytes_invalid=0 send_seq=91250 receive_seq=91250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.548 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=775321 sysload=0.18 cputime=235.982 memavail=1629736 print_time=5675.552 buffer_time=2.686 print_stall=0 extruder: target=215 temp=215.3 pwm=0.444
Stats 5665.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3097323 bytes_read=1720968 bytes_retransmit=9 bytes_invalid=0 send_seq=91271 receive_seq=91271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=55.0 mcu_temp: temp=43.0 sd_pos=775385 sysload=0.18 cputime=236.039 memavail=1629516 print_time=5676.502 buffer_time=2.635 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 5666.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3097910 bytes_read=1721399 bytes_retransmit=9 bytes_invalid=0 send_seq=91291 receive_seq=91291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=775449 sysload=0.18 cputime=236.098 memavail=1629512 print_time=5677.501 buffer_time=2.633 print_stall=0 extruder: target=215 temp=215.4 pwm=0.275
Stats 5667.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3098544 bytes_read=1721811 bytes_retransmit=9 bytes_invalid=0 send_seq=91313 receive_seq=91313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=775542 sysload=0.16 cputime=236.154 memavail=1629196 print_time=5678.566 buffer_time=2.698 print_stall=0 extruder: target=215 temp=215.1 pwm=0.593
Stats 5668.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3099235 bytes_read=1722208 bytes_retransmit=9 bytes_invalid=0 send_seq=91335 receive_seq=91335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.205 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=775640 sysload=0.16 cputime=236.214 memavail=1629000 print_time=5679.640 buffer_time=2.771 print_stall=0 extruder: target=215 temp=215.3 pwm=0.351
Stats 5669.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3099915 bytes_read=1722654 bytes_retransmit=9 bytes_invalid=0 send_seq=91358 receive_seq=91358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=775703 sysload=0.16 cputime=236.274 memavail=1629228 print_time=5680.755 buffer_time=2.885 print_stall=0 extruder: target=215 temp=215.1 pwm=0.592
Stats 5670.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3100495 bytes_read=1723041 bytes_retransmit=9 bytes_invalid=0 send_seq=91378 receive_seq=91378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=775769 sysload=0.16 cputime=236.329 memavail=1629472 print_time=5681.904 buffer_time=3.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 5671.1: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000049 bytes_write=3100797 bytes_read=1723403 bytes_retransmit=9 bytes_invalid=0 send_seq=91393 receive_seq=91393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.536 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=775769 sysload=0.16 cputime=236.385 memavail=1629484 print_time=5681.904 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 5672.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3101399 bytes_read=1723844 bytes_retransmit=9 bytes_invalid=0 send_seq=91412 receive_seq=91412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=775865 sysload=0.15 cputime=236.443 memavail=1629480 print_time=5683.088 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 5673.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3102063 bytes_read=1724236 bytes_retransmit=9 bytes_invalid=0 send_seq=91433 receive_seq=91433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.448 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=775930 sysload=0.15 cputime=236.499 memavail=1629204 print_time=5684.304 buffer_time=2.432 print_stall=0 extruder: target=215 temp=214.9 pwm=0.604
Stats 5674.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3102666 bytes_read=1724618 bytes_retransmit=9 bytes_invalid=0 send_seq=91452 receive_seq=91452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.271 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=775994 sysload=0.15 cputime=236.556 memavail=1629300 print_time=5685.543 buffer_time=2.670 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 5675.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3103383 bytes_read=1725059 bytes_retransmit=9 bytes_invalid=0 send_seq=91474 receive_seq=91474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.469 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=776060 sysload=0.15 cputime=236.614 memavail=1629444 print_time=5686.806 buffer_time=2.932 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 5676.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3103962 bytes_read=1725446 bytes_retransmit=9 bytes_invalid=0 send_seq=91494 receive_seq=91494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=776092 sysload=0.15 cputime=236.669 memavail=1629264 print_time=5687.845 buffer_time=2.970 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 5677.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3104266 bytes_read=1725843 bytes_retransmit=9 bytes_invalid=0 send_seq=91510 receive_seq=91510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=11 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.690 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=776124 sysload=0.14 cputime=236.725 memavail=1629212 print_time=5688.091 buffer_time=2.213 print_stall=0 extruder: target=215 temp=214.8 pwm=0.628
Stats 5678.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3104954 bytes_read=1726254 bytes_retransmit=9 bytes_invalid=0 send_seq=91529 receive_seq=91529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.204 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=776190 sysload=0.14 cputime=236.780 memavail=1629604 print_time=5689.401 buffer_time=2.520 print_stall=0 extruder: target=215 temp=214.8 pwm=0.584
Stats 5679.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3105639 bytes_read=1726651 bytes_retransmit=9 bytes_invalid=0 send_seq=91551 receive_seq=91551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.875 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=776286 sysload=0.14 cputime=236.838 memavail=1629860 print_time=5690.741 buffer_time=2.858 print_stall=0 extruder: target=215 temp=215.1 pwm=0.300
Stats 5680.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3106281 bytes_read=1727058 bytes_retransmit=9 bytes_invalid=0 send_seq=91572 receive_seq=91572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.714 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=776352 sysload=0.14 cputime=236.897 memavail=1629916 print_time=5692.082 buffer_time=3.196 print_stall=0 extruder: target=215 temp=214.8 pwm=0.483
Stats 5681.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3106551 bytes_read=1727444 bytes_retransmit=9 bytes_invalid=0 send_seq=91586 receive_seq=91586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=776352 sysload=0.14 cputime=236.950 memavail=1630412 print_time=5692.082 buffer_time=2.194 print_stall=0 extruder: target=215 temp=214.9 pwm=0.386
Stats 5682.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3107219 bytes_read=1727851 bytes_retransmit=9 bytes_invalid=0 send_seq=91607 receive_seq=91607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=776416 sysload=0.13 cputime=237.004 memavail=1630440 print_time=5693.445 buffer_time=2.556 print_stall=0 extruder: target=215 temp=214.9 pwm=0.438
Stats 5683.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3107901 bytes_read=1728263 bytes_retransmit=9 bytes_invalid=0 send_seq=91629 receive_seq=91629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=776482 sysload=0.13 cputime=237.056 memavail=1630440 print_time=5694.823 buffer_time=2.934 print_stall=0 extruder: target=215 temp=214.8 pwm=0.492
Stats 5684.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3108515 bytes_read=1728674 bytes_retransmit=9 bytes_invalid=0 send_seq=91648 receive_seq=91648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=776546 sysload=0.13 cputime=237.092 memavail=1630908 print_time=5696.216 buffer_time=3.326 print_stall=0 extruder: target=215 temp=215.0 pwm=0.403
Stats 5685.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3108807 bytes_read=1729057 bytes_retransmit=9 bytes_invalid=0 send_seq=91665 receive_seq=91665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.133 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=776546 sysload=0.13 cputime=237.147 memavail=1630964 print_time=5696.216 buffer_time=2.325 print_stall=0 extruder: target=215 temp=214.7 pwm=0.564
Stats 5686.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3109469 bytes_read=1729469 bytes_retransmit=9 bytes_invalid=0 send_seq=91687 receive_seq=91687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.427 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=776645 sysload=0.13 cputime=237.203 memavail=1631152 print_time=5697.624 buffer_time=2.732 print_stall=0 extruder: target=215 temp=214.8 pwm=0.478
Stats 5687.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3110161 bytes_read=1729910 bytes_retransmit=9 bytes_invalid=0 send_seq=91709 receive_seq=91709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=776705 sysload=0.12 cputime=237.259 memavail=1631464 print_time=5699.048 buffer_time=3.156 print_stall=0 extruder: target=215 temp=214.8 pwm=0.509
Stats 5688.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3110402 bytes_read=1730272 bytes_retransmit=9 bytes_invalid=0 send_seq=91724 receive_seq=91724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=776705 sysload=0.12 cputime=237.311 memavail=1630824 print_time=5699.048 buffer_time=2.155 print_stall=0 extruder: target=215 temp=214.8 pwm=0.481
Stats 5689.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3111022 bytes_read=1730664 bytes_retransmit=9 bytes_invalid=0 send_seq=91742 receive_seq=91742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.648 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=776768 sysload=0.12 cputime=237.365 memavail=1630572 print_time=5700.477 buffer_time=2.583 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 5690.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3111724 bytes_read=1731085 bytes_retransmit=9 bytes_invalid=0 send_seq=91763 receive_seq=91763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.490 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=776832 sysload=0.12 cputime=237.422 memavail=1630856 print_time=5701.913 buffer_time=3.019 print_stall=0 extruder: target=215 temp=214.9 pwm=0.456
Stats 5691.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3111962 bytes_read=1731447 bytes_retransmit=9 bytes_invalid=0 send_seq=91778 receive_seq=91778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=776832 sysload=0.12 cputime=237.456 memavail=1630344 print_time=5701.913 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.0 pwm=0.399
Stats 5692.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3112625 bytes_read=1731864 bytes_retransmit=9 bytes_invalid=0 send_seq=91798 receive_seq=91798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.852 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=776898 sysload=0.11 cputime=237.494 memavail=1630268 print_time=5703.356 buffer_time=2.460 print_stall=0 extruder: target=215 temp=214.8 pwm=0.514
Stats 5693.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3113274 bytes_read=1732285 bytes_retransmit=9 bytes_invalid=0 send_seq=91819 receive_seq=91819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.208 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=776962 sysload=0.11 cputime=237.531 memavail=1629780 print_time=5704.807 buffer_time=2.910 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 5694.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3113906 bytes_read=1732677 bytes_retransmit=9 bytes_invalid=0 send_seq=91840 receive_seq=91840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=777028 sysload=0.11 cputime=237.567 memavail=1629940 print_time=5706.264 buffer_time=3.367 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 5695.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3114134 bytes_read=1733044 bytes_retransmit=9 bytes_invalid=0 send_seq=91853 receive_seq=91853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=777028 sysload=0.11 cputime=237.619 memavail=1629972 print_time=5706.264 buffer_time=2.366 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 5696.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000039 bytes_write=3114792 bytes_read=1733470 bytes_retransmit=9 bytes_invalid=0 send_seq=91875 receive_seq=91875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.265 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=777090 sysload=0.11 cputime=237.678 memavail=1630200 print_time=5707.730 buffer_time=2.831 print_stall=0 extruder: target=215 temp=214.7 pwm=0.601
Stats 5697.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3115445 bytes_read=1733877 bytes_retransmit=9 bytes_invalid=0 send_seq=91896 receive_seq=91896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=777155 sysload=0.10 cputime=237.737 memavail=1629968 print_time=5709.194 buffer_time=3.295 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 5698.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3115678 bytes_read=1734234 bytes_retransmit=9 bytes_invalid=0 send_seq=91907 receive_seq=91907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=777155 sysload=0.10 cputime=237.791 memavail=1630172 print_time=5709.194 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.0 pwm=0.362
Stats 5699.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3116357 bytes_read=1734655 bytes_retransmit=9 bytes_invalid=0 send_seq=91928 receive_seq=91928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=777218 sysload=0.10 cputime=237.843 memavail=1629928 print_time=5710.659 buffer_time=2.759 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 5700.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3117025 bytes_read=1735047 bytes_retransmit=9 bytes_invalid=0 send_seq=91949 receive_seq=91949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.009 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=777283 sysload=0.10 cputime=237.897 memavail=1630172 print_time=5712.124 buffer_time=3.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 5701.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3117237 bytes_read=1735434 bytes_retransmit=9 bytes_invalid=0 send_seq=91963 receive_seq=91963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=777283 sysload=0.10 cputime=237.951 memavail=1629928 print_time=5712.124 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.431
Stats 5702.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3117940 bytes_read=1735860 bytes_retransmit=9 bytes_invalid=0 send_seq=91985 receive_seq=91985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=777347 sysload=0.09 cputime=238.006 memavail=1629688 print_time=5713.588 buffer_time=2.687 print_stall=0 extruder: target=215 temp=215.2 pwm=0.332
Stats 5703.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3118615 bytes_read=1736257 bytes_retransmit=9 bytes_invalid=0 send_seq=92007 receive_seq=92007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=777413 sysload=0.09 cputime=238.064 memavail=1630164 print_time=5715.053 buffer_time=3.151 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 5704.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3118854 bytes_read=1736634 bytes_retransmit=9 bytes_invalid=0 send_seq=92022 receive_seq=92022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.585 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=777413 sysload=0.09 cputime=238.099 memavail=1629360 print_time=5715.053 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 5705.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3119523 bytes_read=1737050 bytes_retransmit=9 bytes_invalid=0 send_seq=92042 receive_seq=92042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=777509 sysload=0.09 cputime=238.158 memavail=1628872 print_time=5716.523 buffer_time=2.619 print_stall=0 extruder: target=215 temp=214.8 pwm=0.567
Stats 5706.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3120186 bytes_read=1737452 bytes_retransmit=9 bytes_invalid=0 send_seq=92065 receive_seq=92065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=777575 sysload=0.09 cputime=238.216 memavail=1629044 print_time=5717.975 buffer_time=3.071 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 5707.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3120413 bytes_read=1737844 bytes_retransmit=9 bytes_invalid=0 send_seq=92080 receive_seq=92080 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.655 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=777575 sysload=0.08 cputime=238.271 memavail=1629384 print_time=5717.975 buffer_time=2.070 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 5708.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3121134 bytes_read=1738275 bytes_retransmit=9 bytes_invalid=0 send_seq=92103 receive_seq=92103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=777639 sysload=0.08 cputime=238.329 memavail=1629400 print_time=5719.426 buffer_time=2.521 print_stall=0 extruder: target=215 temp=214.8 pwm=0.597
Stats 5709.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3121850 bytes_read=1738682 bytes_retransmit=9 bytes_invalid=0 send_seq=92127 receive_seq=92127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=777705 sysload=0.08 cputime=238.388 memavail=1629364 print_time=5720.870 buffer_time=2.964 print_stall=0 extruder: target=215 temp=215.1 pwm=0.356
Stats 5710.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3122465 bytes_read=1739094 bytes_retransmit=9 bytes_invalid=0 send_seq=92149 receive_seq=92149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.514 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=777768 sysload=0.08 cputime=238.445 memavail=1629108 print_time=5722.307 buffer_time=3.400 print_stall=0 extruder: target=215 temp=214.8 pwm=0.580
Stats 5711.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3122788 bytes_read=1739485 bytes_retransmit=9 bytes_invalid=0 send_seq=92164 receive_seq=92164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=777768 sysload=0.08 cputime=238.499 memavail=1629616 print_time=5722.307 buffer_time=2.399 print_stall=0 extruder: target=215 temp=214.8 pwm=0.518
Stats 5712.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3123464 bytes_read=1739902 bytes_retransmit=9 bytes_invalid=0 send_seq=92187 receive_seq=92187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.747 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=777832 sysload=0.08 cputime=238.558 memavail=1629112 print_time=5723.737 buffer_time=2.829 print_stall=0 extruder: target=215 temp=215.2 pwm=0.263
Stats 5713.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3124054 bytes_read=1740324 bytes_retransmit=9 bytes_invalid=0 send_seq=92208 receive_seq=92208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=777927 sysload=0.08 cputime=238.618 memavail=1629112 print_time=5725.166 buffer_time=3.257 print_stall=0 extruder: target=215 temp=214.8 pwm=0.574
Stats 5714.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3124395 bytes_read=1740710 bytes_retransmit=9 bytes_invalid=0 send_seq=92225 receive_seq=92225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.361 rpi: temp=57.0 mcu_temp: temp=43.3 sd_pos=777927 sysload=0.08 cputime=238.652 memavail=1629356 print_time=5725.166 buffer_time=2.256 print_stall=0 extruder: target=215 temp=214.9 pwm=0.438
Stats 5715.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3125042 bytes_read=1741102 bytes_retransmit=9 bytes_invalid=0 send_seq=92246 receive_seq=92246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.297 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=777992 sysload=0.08 cputime=238.689 memavail=1629372 print_time=5726.568 buffer_time=2.657 print_stall=0 extruder: target=215 temp=214.7 pwm=0.636
Stats 5716.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3125719 bytes_read=1741529 bytes_retransmit=9 bytes_invalid=0 send_seq=92268 receive_seq=92268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=778054 sysload=0.08 cputime=238.745 memavail=1629868 print_time=5727.962 buffer_time=3.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 5717.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3125947 bytes_read=1741914 bytes_retransmit=9 bytes_invalid=0 send_seq=92283 receive_seq=92283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=778054 sysload=0.15 cputime=238.800 memavail=1629624 print_time=5727.962 buffer_time=2.049 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 5718.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3126581 bytes_read=1742296 bytes_retransmit=9 bytes_invalid=0 send_seq=92304 receive_seq=92304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=778119 sysload=0.15 cputime=238.858 memavail=1629636 print_time=5729.341 buffer_time=2.428 print_stall=0 extruder: target=215 temp=214.8 pwm=0.546
Stats 5719.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3127242 bytes_read=1742706 bytes_retransmit=9 bytes_invalid=0 send_seq=92325 receive_seq=92325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=54.5 mcu_temp: temp=42.2 sd_pos=778183 sysload=0.15 cputime=238.919 memavail=1629384 print_time=5730.706 buffer_time=2.792 print_stall=0 extruder: target=215 temp=214.9 pwm=0.454
Stats 5720.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3127907 bytes_read=1743111 bytes_retransmit=9 bytes_invalid=0 send_seq=92348 receive_seq=92348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=778281 sysload=0.15 cputime=238.977 memavail=1629632 print_time=5732.056 buffer_time=3.141 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 5721.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3128151 bytes_read=1743475 bytes_retransmit=9 bytes_invalid=0 send_seq=92364 receive_seq=92364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=778281 sysload=0.15 cputime=239.031 memavail=1629856 print_time=5732.056 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 5722.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3128793 bytes_read=1743907 bytes_retransmit=9 bytes_invalid=0 send_seq=92384 receive_seq=92384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.504 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=778345 sysload=0.22 cputime=239.088 memavail=1629444 print_time=5733.390 buffer_time=2.473 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 5723.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3129465 bytes_read=1744323 bytes_retransmit=9 bytes_invalid=0 send_seq=92407 receive_seq=92407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=778411 sysload=0.22 cputime=239.145 memavail=1629952 print_time=5734.701 buffer_time=2.784 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 5724.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3130092 bytes_read=1744715 bytes_retransmit=9 bytes_invalid=0 send_seq=92428 receive_seq=92428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=778443 sysload=0.22 cputime=239.198 memavail=1629944 print_time=5735.737 buffer_time=2.820 print_stall=0 extruder: target=215 temp=215.1 pwm=0.391
Stats 5725.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3130402 bytes_read=1745112 bytes_retransmit=9 bytes_invalid=0 send_seq=92444 receive_seq=92444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=778473 sysload=0.22 cputime=239.254 memavail=1629708 print_time=5735.989 buffer_time=2.071 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 5726.1: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3131084 bytes_read=1745523 bytes_retransmit=9 bytes_invalid=0 send_seq=92466 receive_seq=92466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.535 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=778538 sysload=0.22 cputime=239.315 memavail=1629960 print_time=5737.253 buffer_time=2.335 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 5727.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3131751 bytes_read=1745935 bytes_retransmit=9 bytes_invalid=0 send_seq=92488 receive_seq=92488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=778602 sysload=0.28 cputime=239.372 memavail=1630020 print_time=5738.494 buffer_time=2.575 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 5728.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3132432 bytes_read=1746372 bytes_retransmit=9 bytes_invalid=0 send_seq=92512 receive_seq=92512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.617 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=778701 sysload=0.28 cputime=239.429 memavail=1629808 print_time=5739.721 buffer_time=2.801 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 5729.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3133085 bytes_read=1746778 bytes_retransmit=9 bytes_invalid=0 send_seq=92533 receive_seq=92533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=778763 sysload=0.28 cputime=239.487 memavail=1629996 print_time=5740.897 buffer_time=2.977 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5730.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3133617 bytes_read=1747165 bytes_retransmit=9 bytes_invalid=0 send_seq=92553 receive_seq=92553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=778826 sysload=0.28 cputime=239.545 memavail=1630356 print_time=5742.049 buffer_time=3.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 5731.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3133961 bytes_read=1747567 bytes_retransmit=9 bytes_invalid=0 send_seq=92570 receive_seq=92570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.497 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=778826 sysload=0.28 cputime=239.600 memavail=1630332 print_time=5742.049 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 5732.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3134587 bytes_read=1747978 bytes_retransmit=9 bytes_invalid=0 send_seq=92589 receive_seq=92589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=778889 sysload=0.42 cputime=239.657 memavail=1630332 print_time=5743.168 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 5733.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3135232 bytes_read=1748375 bytes_retransmit=9 bytes_invalid=0 send_seq=92611 receive_seq=92611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=778985 sysload=0.42 cputime=239.693 memavail=1630024 print_time=5744.252 buffer_time=2.329 print_stall=0 extruder: target=215 temp=215.0 pwm=0.518
Stats 5734.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3135858 bytes_read=1748802 bytes_retransmit=9 bytes_invalid=0 send_seq=92633 receive_seq=92633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.364 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=779051 sysload=0.42 cputime=239.733 memavail=1630268 print_time=5745.299 buffer_time=2.375 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 5735.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3136486 bytes_read=1749213 bytes_retransmit=9 bytes_invalid=0 send_seq=92655 receive_seq=92655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=779116 sysload=0.42 cputime=239.793 memavail=1630464 print_time=5746.302 buffer_time=2.377 print_stall=0 extruder: target=215 temp=215.3 pwm=0.250
Stats 5736.1: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3137076 bytes_read=1749605 bytes_retransmit=9 bytes_invalid=0 send_seq=92676 receive_seq=92676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=779181 sysload=0.42 cputime=239.853 memavail=1630168 print_time=5747.256 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.2 pwm=0.387
Stats 5737.1: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3137643 bytes_read=1750037 bytes_retransmit=9 bytes_invalid=0 send_seq=92696 receive_seq=92696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=779278 sysload=0.47 cputime=239.913 memavail=1630264 print_time=5748.194 buffer_time=2.267 print_stall=0 extruder: target=215 temp=215.0 pwm=0.561
Stats 5738.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3138228 bytes_read=1750443 bytes_retransmit=9 bytes_invalid=0 send_seq=92717 receive_seq=92717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=779344 sysload=0.47 cputime=239.967 memavail=1629768 print_time=5749.015 buffer_time=2.088 print_stall=0 extruder: target=215 temp=215.3 pwm=0.314
Stats 5739.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3139167 bytes_read=1750865 bytes_retransmit=9 bytes_invalid=0 send_seq=92744 receive_seq=92744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.328 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=779508 sysload=0.47 cputime=240.029 memavail=1629992 print_time=5750.567 buffer_time=2.639 print_stall=0 extruder: target=215 temp=215.2 pwm=0.454
Stats 5740.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3139746 bytes_read=1751282 bytes_retransmit=9 bytes_invalid=0 send_seq=92764 receive_seq=92764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=779574 sysload=0.47 cputime=240.089 memavail=1629492 print_time=5751.171 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 5741.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3140836 bytes_read=1751733 bytes_retransmit=9 bytes_invalid=0 send_seq=92794 receive_seq=92794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=779876 sysload=0.47 cputime=240.151 memavail=1629268 print_time=5752.293 buffer_time=2.365 print_stall=0 extruder: target=215 temp=215.0 pwm=0.575
Stats 5742.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3141661 bytes_read=1752160 bytes_retransmit=9 bytes_invalid=0 send_seq=92819 receive_seq=92819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.609 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=780172 sysload=0.51 cputime=240.213 memavail=1629056 print_time=5752.956 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.0 pwm=0.515
Stats 5743.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3142304 bytes_read=1752577 bytes_retransmit=9 bytes_invalid=0 send_seq=92839 receive_seq=92839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=780421 sysload=0.51 cputime=240.279 memavail=1628772 print_time=5753.968 buffer_time=2.039 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 5744.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3143022 bytes_read=1752988 bytes_retransmit=9 bytes_invalid=0 send_seq=92861 receive_seq=92861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=780665 sysload=0.51 cputime=240.341 memavail=1629596 print_time=5754.980 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 5745.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3143668 bytes_read=1753380 bytes_retransmit=9 bytes_invalid=0 send_seq=92882 receive_seq=92882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.443 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=780918 sysload=0.51 cputime=240.407 memavail=1630096 print_time=5755.992 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 5746.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3144468 bytes_read=1753823 bytes_retransmit=9 bytes_invalid=0 send_seq=92905 receive_seq=92905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.503 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=781242 sysload=0.51 cputime=240.474 memavail=1630356 print_time=5757.185 buffer_time=2.255 print_stall=0 extruder: target=215 temp=215.2 pwm=0.427
Stats 5747.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3145321 bytes_read=1754264 bytes_retransmit=9 bytes_invalid=0 send_seq=92930 receive_seq=92930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=781496 sysload=0.55 cputime=240.541 memavail=1630336 print_time=5758.078 buffer_time=2.147 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 5748.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3146015 bytes_read=1754661 bytes_retransmit=9 bytes_invalid=0 send_seq=92952 receive_seq=92952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.468 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=781745 sysload=0.55 cputime=240.582 memavail=1630356 print_time=5759.117 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.0 pwm=0.533
Stats 5749.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3146676 bytes_read=1755083 bytes_retransmit=9 bytes_invalid=0 send_seq=92973 receive_seq=92973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=782000 sysload=0.55 cputime=240.649 memavail=1630360 print_time=5760.156 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 5750.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3147296 bytes_read=1755489 bytes_retransmit=9 bytes_invalid=0 send_seq=92994 receive_seq=92994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=782196 sysload=0.55 cputime=240.709 memavail=1630100 print_time=5760.935 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 5751.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3148217 bytes_read=1755896 bytes_retransmit=9 bytes_invalid=0 send_seq=93018 receive_seq=93018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=782560 sysload=0.55 cputime=240.774 memavail=1630108 print_time=5762.040 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 5752.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3148806 bytes_read=1756328 bytes_retransmit=9 bytes_invalid=0 send_seq=93038 receive_seq=93038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=782748 sysload=0.75 cputime=240.839 memavail=1630116 print_time=5763.105 buffer_time=2.172 print_stall=0 extruder: target=215 temp=215.2 pwm=0.324
Stats 5753.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3149381 bytes_read=1756724 bytes_retransmit=9 bytes_invalid=0 send_seq=93057 receive_seq=93057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=782934 sysload=0.75 cputime=240.903 memavail=1630116 print_time=5764.170 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.9 pwm=0.603
Stats 5754.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3149908 bytes_read=1757096 bytes_retransmit=9 bytes_invalid=0 send_seq=93074 receive_seq=93074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=783121 sysload=0.75 cputime=240.942 memavail=1629892 print_time=5765.235 buffer_time=2.300 print_stall=0 extruder: target=215 temp=214.9 pwm=0.532
Stats 5755.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3150415 bytes_read=1757513 bytes_retransmit=9 bytes_invalid=0 send_seq=93094 receive_seq=93094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=783249 sysload=0.75 cputime=241.003 memavail=1629372 print_time=5765.945 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.2 pwm=0.377
Stats 5756.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=3151046 bytes_read=1757919 bytes_retransmit=9 bytes_invalid=0 send_seq=93115 receive_seq=93115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=783443 sysload=0.75 cputime=241.068 memavail=1629104 print_time=5767.010 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.1 pwm=0.381
Stats 5757.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=3151802 bytes_read=1758331 bytes_retransmit=9 bytes_invalid=0 send_seq=93137 receive_seq=93137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=783732 sysload=0.69 cputime=241.110 memavail=1629368 print_time=5768.345 buffer_time=2.409 print_stall=0 extruder: target=215 temp=215.3 pwm=0.254
Stats 5758.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=3152638 bytes_read=1758783 bytes_retransmit=9 bytes_invalid=0 send_seq=93164 receive_seq=93164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=783866 sysload=0.69 cputime=241.173 memavail=1629144 print_time=5768.942 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 5759.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=3153620 bytes_read=1759229 bytes_retransmit=9 bytes_invalid=0 send_seq=93193 receive_seq=93193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=784025 sysload=0.69 cputime=241.235 memavail=1629132 print_time=5770.102 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.3 pwm=0.388
Stats 5760.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=3154544 bytes_read=1759641 bytes_retransmit=9 bytes_invalid=0 send_seq=93218 receive_seq=93218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=784152 sysload=0.69 cputime=241.296 memavail=1629120 print_time=5771.524 buffer_time=2.586 print_stall=0 extruder: target=215 temp=215.4 pwm=0.306
Stats 5761.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000057 bytes_write=3155170 bytes_read=1760068 bytes_retransmit=9 bytes_invalid=0 send_seq=93240 receive_seq=93240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=784245 sysload=0.69 cputime=241.358 memavail=1629120 print_time=5772.352 buffer_time=2.413 print_stall=0 extruder: target=215 temp=215.0 pwm=0.590
Stats 5762.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3155753 bytes_read=1760489 bytes_retransmit=9 bytes_invalid=0 send_seq=93261 receive_seq=93261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=784309 sysload=0.63 cputime=241.416 memavail=1629084 print_time=5773.239 buffer_time=2.299 print_stall=0 extruder: target=215 temp=215.3 pwm=0.281
Stats 5763.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3156320 bytes_read=1760876 bytes_retransmit=9 bytes_invalid=0 send_seq=93281 receive_seq=93281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=784372 sysload=0.63 cputime=241.474 memavail=1629120 print_time=5774.169 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 5764.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3156909 bytes_read=1761288 bytes_retransmit=9 bytes_invalid=0 send_seq=93300 receive_seq=93300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=784436 sysload=0.63 cputime=241.515 memavail=1628904 print_time=5775.148 buffer_time=2.207 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 5765.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3157520 bytes_read=1761699 bytes_retransmit=9 bytes_invalid=0 send_seq=93322 receive_seq=93322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=784531 sysload=0.63 cputime=241.574 memavail=1628784 print_time=5776.176 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.2 pwm=0.389
Stats 5766.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3158170 bytes_read=1762096 bytes_retransmit=9 bytes_invalid=0 send_seq=93344 receive_seq=93344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=784595 sysload=0.63 cputime=241.611 memavail=1628784 print_time=5777.243 buffer_time=2.300 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 5767.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3158800 bytes_read=1762528 bytes_retransmit=9 bytes_invalid=0 send_seq=93364 receive_seq=93364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=784661 sysload=0.58 cputime=241.671 memavail=1629064 print_time=5778.343 buffer_time=2.400 print_stall=0 extruder: target=215 temp=214.9 pwm=0.601
Stats 5768.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3159457 bytes_read=1762944 bytes_retransmit=9 bytes_invalid=0 send_seq=93387 receive_seq=93387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=784724 sysload=0.58 cputime=241.733 memavail=1628752 print_time=5779.477 buffer_time=2.533 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 5769.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3160109 bytes_read=1763346 bytes_retransmit=9 bytes_invalid=0 send_seq=93410 receive_seq=93410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=784788 sysload=0.58 cputime=241.769 memavail=1628996 print_time=5780.645 buffer_time=2.702 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 5770.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3160784 bytes_read=1763778 bytes_retransmit=9 bytes_invalid=0 send_seq=93433 receive_seq=93433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.459 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=784883 sysload=0.58 cputime=241.830 memavail=1629004 print_time=5781.855 buffer_time=2.910 print_stall=0 extruder: target=215 temp=214.9 pwm=0.557
Stats 5771.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3161380 bytes_read=1764189 bytes_retransmit=9 bytes_invalid=0 send_seq=93455 receive_seq=93455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=784949 sysload=0.58 cputime=241.887 memavail=1629008 print_time=5783.074 buffer_time=3.129 print_stall=0 extruder: target=215 temp=214.9 pwm=0.582
Stats 5772.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3161630 bytes_read=1764556 bytes_retransmit=9 bytes_invalid=0 send_seq=93468 receive_seq=93468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=784949 sysload=0.61 cputime=241.920 memavail=1629512 print_time=5783.074 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 5773.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3162318 bytes_read=1764983 bytes_retransmit=9 bytes_invalid=0 send_seq=93490 receive_seq=93490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=785013 sysload=0.61 cputime=241.978 memavail=1629544 print_time=5784.324 buffer_time=2.378 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 5774.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3162983 bytes_read=1765399 bytes_retransmit=9 bytes_invalid=0 send_seq=93513 receive_seq=93513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=785078 sysload=0.61 cputime=242.013 memavail=1629768 print_time=5785.597 buffer_time=2.651 print_stall=0 extruder: target=215 temp=215.4 pwm=0.199
Stats 5775.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3163638 bytes_read=1765796 bytes_retransmit=9 bytes_invalid=0 send_seq=93535 receive_seq=93535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.066 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=785142 sysload=0.61 cputime=242.069 memavail=1630020 print_time=5786.895 buffer_time=2.947 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 5776.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3164235 bytes_read=1766218 bytes_retransmit=9 bytes_invalid=0 send_seq=93556 receive_seq=93556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=785239 sysload=0.61 cputime=242.125 memavail=1629768 print_time=5788.215 buffer_time=3.267 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 5777.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3164556 bytes_read=1766604 bytes_retransmit=9 bytes_invalid=0 send_seq=93572 receive_seq=93572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.058 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=785239 sysload=0.56 cputime=242.178 memavail=1629768 print_time=5788.215 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.2 pwm=0.311
Stats 5778.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3165233 bytes_read=1766986 bytes_retransmit=9 bytes_invalid=0 send_seq=93593 receive_seq=93593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=785302 sysload=0.56 cputime=242.236 memavail=1630024 print_time=5789.553 buffer_time=2.604 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 5779.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3165882 bytes_read=1767396 bytes_retransmit=9 bytes_invalid=0 send_seq=93614 receive_seq=93614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=785368 sysload=0.56 cputime=242.295 memavail=1630032 print_time=5790.907 buffer_time=2.957 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 5780.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3166445 bytes_read=1767783 bytes_retransmit=9 bytes_invalid=0 send_seq=93633 receive_seq=93633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=55.0 mcu_temp: temp=41.2 sd_pos=785432 sysload=0.56 cputime=242.353 memavail=1629728 print_time=5792.275 buffer_time=3.324 print_stall=0 extruder: target=215 temp=215.3 pwm=0.283
Stats 5781.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3166732 bytes_read=1768140 bytes_retransmit=9 bytes_invalid=0 send_seq=93647 receive_seq=93647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.489 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=785432 sysload=0.56 cputime=242.408 memavail=1629668 print_time=5792.275 buffer_time=2.324 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 5782.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3167387 bytes_read=1768572 bytes_retransmit=9 bytes_invalid=0 send_seq=93667 receive_seq=93667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=785498 sysload=0.60 cputime=242.464 memavail=1629164 print_time=5793.658 buffer_time=2.705 print_stall=0 extruder: target=215 temp=214.9 pwm=0.554
Stats 5783.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3168072 bytes_read=1768988 bytes_retransmit=9 bytes_invalid=0 send_seq=93690 receive_seq=93690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.8 pwm=0.963 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=785562 sysload=0.60 cputime=242.522 memavail=1629160 print_time=5795.055 buffer_time=3.102 print_stall=0 extruder: target=215 temp=215.2 pwm=0.292
Stats 5784.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3168286 bytes_read=1769345 bytes_retransmit=9 bytes_invalid=0 send_seq=93704 receive_seq=93704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=785562 sysload=0.60 cputime=242.555 memavail=1629156 print_time=5795.055 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 5785.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3168942 bytes_read=1769757 bytes_retransmit=9 bytes_invalid=0 send_seq=93723 receive_seq=93723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=785657 sysload=0.60 cputime=242.613 memavail=1629164 print_time=5796.475 buffer_time=2.521 print_stall=0 extruder: target=215 temp=214.8 pwm=0.594
Stats 5786.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3169649 bytes_read=1770173 bytes_retransmit=9 bytes_invalid=0 send_seq=93746 receive_seq=93746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.488 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=785720 sysload=0.60 cputime=242.670 memavail=1629416 print_time=5797.888 buffer_time=2.934 print_stall=0 extruder: target=215 temp=214.8 pwm=0.572
Stats 5787.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3170203 bytes_read=1770565 bytes_retransmit=9 bytes_invalid=0 send_seq=93764 receive_seq=93764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=785786 sysload=0.55 cputime=242.727 memavail=1629676 print_time=5799.316 buffer_time=3.361 print_stall=0 extruder: target=215 temp=215.2 pwm=0.364
Stats 5788.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3170524 bytes_read=1770957 bytes_retransmit=9 bytes_invalid=0 send_seq=93779 receive_seq=93779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=785786 sysload=0.55 cputime=242.781 memavail=1629928 print_time=5799.316 buffer_time=2.360 print_stall=0 extruder: target=215 temp=214.9 pwm=0.582
Stats 5789.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3171199 bytes_read=1771363 bytes_retransmit=9 bytes_invalid=0 send_seq=93800 receive_seq=93800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=785850 sysload=0.55 cputime=242.839 memavail=1629872 print_time=5800.751 buffer_time=2.795 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 5790.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3171894 bytes_read=1771755 bytes_retransmit=9 bytes_invalid=0 send_seq=93821 receive_seq=93821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=785915 sysload=0.55 cputime=242.893 memavail=1629620 print_time=5802.193 buffer_time=3.236 print_stall=0 extruder: target=215 temp=215.1 pwm=0.368
Stats 5791.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3172100 bytes_read=1772137 bytes_retransmit=9 bytes_invalid=0 send_seq=93834 receive_seq=93834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=55.0 mcu_temp: temp=41.7 sd_pos=785915 sysload=0.55 cputime=242.946 memavail=1629620 print_time=5802.193 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 5792.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3172765 bytes_read=1772558 bytes_retransmit=9 bytes_invalid=0 send_seq=93855 receive_seq=93855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=785979 sysload=0.51 cputime=243.006 memavail=1629368 print_time=5803.642 buffer_time=2.683 print_stall=0 extruder: target=215 temp=215.2 pwm=0.329
Stats 5793.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3173429 bytes_read=1772945 bytes_retransmit=9 bytes_invalid=0 send_seq=93875 receive_seq=93875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.347 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=786077 sysload=0.51 cputime=243.062 memavail=1629376 print_time=5805.106 buffer_time=3.146 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 5794.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3173663 bytes_read=1773332 bytes_retransmit=9 bytes_invalid=0 send_seq=93889 receive_seq=93889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.383 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=786077 sysload=0.51 cputime=243.114 memavail=1629380 print_time=5805.106 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 5795.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3174351 bytes_read=1773743 bytes_retransmit=9 bytes_invalid=0 send_seq=93911 receive_seq=93911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=55.0 mcu_temp: temp=40.8 sd_pos=786140 sysload=0.51 cputime=243.171 memavail=1629368 print_time=5806.556 buffer_time=2.596 print_stall=0 extruder: target=215 temp=215.2 pwm=0.271
Stats 5796.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3175018 bytes_read=1774135 bytes_retransmit=9 bytes_invalid=0 send_seq=93932 receive_seq=93932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=786205 sysload=0.51 cputime=243.207 memavail=1629388 print_time=5808.013 buffer_time=3.052 print_stall=0 extruder: target=215 temp=214.8 pwm=0.573
Stats 5797.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3175255 bytes_read=1774542 bytes_retransmit=9 bytes_invalid=0 send_seq=93947 receive_seq=93947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.375 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=786205 sysload=0.47 cputime=243.263 memavail=1629096 print_time=5808.013 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.369
Stats 5798.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3175930 bytes_read=1774953 bytes_retransmit=9 bytes_invalid=0 send_seq=93969 receive_seq=93969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=786268 sysload=0.47 cputime=243.320 memavail=1629404 print_time=5809.471 buffer_time=2.509 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 5799.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3176605 bytes_read=1775340 bytes_retransmit=9 bytes_invalid=0 send_seq=93989 receive_seq=93989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.169 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=786334 sysload=0.47 cputime=243.377 memavail=1629344 print_time=5810.928 buffer_time=2.965 print_stall=0 extruder: target=215 temp=214.9 pwm=0.447
Stats 5800.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3177204 bytes_read=1775757 bytes_retransmit=9 bytes_invalid=0 send_seq=94009 receive_seq=94009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=786398 sysload=0.47 cputime=243.435 memavail=1629560 print_time=5812.386 buffer_time=3.422 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 5801.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3177535 bytes_read=1776138 bytes_retransmit=9 bytes_invalid=0 send_seq=94025 receive_seq=94025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.558 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=786398 sysload=0.47 cputime=243.490 memavail=1629916 print_time=5812.386 buffer_time=2.421 print_stall=0 extruder: target=215 temp=214.9 pwm=0.576
Stats 5802.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3178197 bytes_read=1776545 bytes_retransmit=9 bytes_invalid=0 send_seq=94046 receive_seq=94046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.657 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=786497 sysload=0.43 cputime=243.551 memavail=1629884 print_time=5813.853 buffer_time=2.888 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 5803.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3178902 bytes_read=1776972 bytes_retransmit=9 bytes_invalid=0 send_seq=94068 receive_seq=94068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=786561 sysload=0.43 cputime=243.610 memavail=1629888 print_time=5815.295 buffer_time=3.330 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 5804.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3179125 bytes_read=1777343 bytes_retransmit=9 bytes_invalid=0 send_seq=94082 receive_seq=94082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=786561 sysload=0.43 cputime=243.663 memavail=1629584 print_time=5815.295 buffer_time=2.330 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 5805.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3179768 bytes_read=1777730 bytes_retransmit=9 bytes_invalid=0 send_seq=94102 receive_seq=94102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.196 rpi: temp=55.5 mcu_temp: temp=41.3 sd_pos=786626 sysload=0.43 cputime=243.719 memavail=1629332 print_time=5816.740 buffer_time=2.775 print_stall=0 extruder: target=215 temp=215.2 pwm=0.319
Stats 5806.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3180480 bytes_read=1778157 bytes_retransmit=9 bytes_invalid=0 send_seq=94124 receive_seq=94124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.733 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=786689 sysload=0.43 cputime=243.777 memavail=1629328 print_time=5818.178 buffer_time=3.212 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 5807.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3180734 bytes_read=1778553 bytes_retransmit=9 bytes_invalid=0 send_seq=94140 receive_seq=94140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.443 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=786689 sysload=0.39 cputime=243.832 memavail=1629896 print_time=5818.178 buffer_time=2.211 print_stall=0 extruder: target=215 temp=214.8 pwm=0.607
Stats 5808.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3181389 bytes_read=1778951 bytes_retransmit=9 bytes_invalid=0 send_seq=94160 receive_seq=94160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.405 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=786755 sysload=0.39 cputime=243.890 memavail=1629896 print_time=5819.609 buffer_time=2.641 print_stall=0 extruder: target=215 temp=214.8 pwm=0.561
Stats 5809.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3182062 bytes_read=1779387 bytes_retransmit=9 bytes_invalid=0 send_seq=94181 receive_seq=94181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=786818 sysload=0.39 cputime=243.928 memavail=1629644 print_time=5821.033 buffer_time=3.064 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 5810.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3182292 bytes_read=1779749 bytes_retransmit=9 bytes_invalid=0 send_seq=94196 receive_seq=94196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=786818 sysload=0.39 cputime=243.982 memavail=1629660 print_time=5821.033 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.2 pwm=0.345
Stats 5811.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3182962 bytes_read=1780136 bytes_retransmit=9 bytes_invalid=0 send_seq=94216 receive_seq=94216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=55.0 mcu_temp: temp=41.8 sd_pos=786915 sysload=0.39 cputime=244.038 memavail=1629408 print_time=5822.460 buffer_time=2.490 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 5812.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3183638 bytes_read=1780587 bytes_retransmit=9 bytes_invalid=0 send_seq=94237 receive_seq=94237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=786978 sysload=0.36 cputime=244.097 memavail=1629652 print_time=5823.853 buffer_time=2.883 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 5813.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3184359 bytes_read=1780994 bytes_retransmit=9 bytes_invalid=0 send_seq=94261 receive_seq=94261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.664 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=787044 sysload=0.36 cputime=244.154 memavail=1629140 print_time=5825.242 buffer_time=3.272 print_stall=0 extruder: target=215 temp=215.2 pwm=0.338
Stats 5814.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3184594 bytes_read=1781351 bytes_retransmit=9 bytes_invalid=0 send_seq=94275 receive_seq=94275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.045 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=787044 sysload=0.36 cputime=244.206 memavail=1628636 print_time=5825.242 buffer_time=2.270 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 5815.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3185243 bytes_read=1781777 bytes_retransmit=9 bytes_invalid=0 send_seq=94294 receive_seq=94294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=787108 sysload=0.36 cputime=244.260 memavail=1628892 print_time=5826.617 buffer_time=2.645 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 5816.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3185904 bytes_read=1782169 bytes_retransmit=9 bytes_invalid=0 send_seq=94315 receive_seq=94315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=787173 sysload=0.36 cputime=244.316 memavail=1628640 print_time=5827.976 buffer_time=3.004 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 5817.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3186117 bytes_read=1782531 bytes_retransmit=9 bytes_invalid=0 send_seq=94327 receive_seq=94327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.8 pwm=0.679 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=787173 sysload=0.33 cputime=244.368 memavail=1628624 print_time=5827.976 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.2 pwm=0.349
Stats 5818.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3186793 bytes_read=1782967 bytes_retransmit=9 bytes_invalid=0 send_seq=94348 receive_seq=94348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=787267 sysload=0.33 cputime=244.428 memavail=1628588 print_time=5829.321 buffer_time=2.347 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 5819.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3187510 bytes_read=1783364 bytes_retransmit=9 bytes_invalid=0 send_seq=94370 receive_seq=94370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.027 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=787333 sysload=0.33 cputime=244.484 memavail=1628500 print_time=5830.657 buffer_time=2.682 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 5820.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3188112 bytes_read=1783746 bytes_retransmit=9 bytes_invalid=0 send_seq=94389 receive_seq=94389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.110 rpi: temp=57.5 mcu_temp: temp=41.3 sd_pos=787396 sysload=0.33 cputime=244.542 memavail=1628596 print_time=5831.964 buffer_time=2.988 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 5821.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3188697 bytes_read=1784172 bytes_retransmit=9 bytes_invalid=0 send_seq=94408 receive_seq=94408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=56.5 mcu_temp: temp=41.3 sd_pos=787460 sysload=0.33 cputime=244.600 memavail=1628856 print_time=5833.248 buffer_time=3.271 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 5822.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3189015 bytes_read=1784559 bytes_retransmit=9 bytes_invalid=0 send_seq=94425 receive_seq=94425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.688 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=787460 sysload=0.31 cputime=244.654 memavail=1628916 print_time=5833.248 buffer_time=2.271 print_stall=0 extruder: target=215 temp=215.1 pwm=0.343
Stats 5823.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3189678 bytes_read=1784961 bytes_retransmit=9 bytes_invalid=0 send_seq=94445 receive_seq=94445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=787523 sysload=0.31 cputime=244.711 memavail=1629164 print_time=5834.508 buffer_time=2.530 print_stall=0 extruder: target=215 temp=215.1 pwm=0.362
Stats 5824.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3190343 bytes_read=1785377 bytes_retransmit=9 bytes_invalid=0 send_seq=94465 receive_seq=94465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=56.0 mcu_temp: temp=41.0 sd_pos=787587 sysload=0.31 cputime=244.766 memavail=1629168 print_time=5835.745 buffer_time=2.766 print_stall=0 extruder: target=215 temp=214.8 pwm=0.545
Stats 5825.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3190983 bytes_read=1785769 bytes_retransmit=9 bytes_invalid=0 send_seq=94486 receive_seq=94486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.540 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=787681 sysload=0.31 cputime=244.822 memavail=1628664 print_time=5836.970 buffer_time=2.991 print_stall=0 extruder: target=215 temp=214.7 pwm=0.577
Stats 5826.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3191555 bytes_read=1786161 bytes_retransmit=9 bytes_invalid=0 send_seq=94504 receive_seq=94504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=787745 sysload=0.31 cputime=244.879 memavail=1628656 print_time=5838.140 buffer_time=3.160 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 5827.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3191814 bytes_read=1786557 bytes_retransmit=9 bytes_invalid=0 send_seq=94517 receive_seq=94517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.284 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=787745 sysload=0.28 cputime=244.930 memavail=1628412 print_time=5838.140 buffer_time=2.159 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 5828.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3192492 bytes_read=1786959 bytes_retransmit=9 bytes_invalid=0 send_seq=94540 receive_seq=94540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.2 sd_pos=787808 sysload=0.28 cputime=244.987 memavail=1628664 print_time=5839.290 buffer_time=2.308 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 5829.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3193108 bytes_read=1787356 bytes_retransmit=9 bytes_invalid=0 send_seq=94559 receive_seq=94559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=787874 sysload=0.28 cputime=245.021 memavail=1628916 print_time=5840.404 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.8 pwm=0.607
Stats 5830.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3193740 bytes_read=1787757 bytes_retransmit=9 bytes_invalid=0 send_seq=94576 receive_seq=94576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.042 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=787966 sysload=0.28 cputime=245.076 memavail=1628664 print_time=5841.485 buffer_time=2.502 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5831.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3194312 bytes_read=1788129 bytes_retransmit=9 bytes_invalid=0 send_seq=94593 receive_seq=94593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=788031 sysload=0.28 cputime=245.131 memavail=1628916 print_time=5842.532 buffer_time=2.548 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 5832.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3194899 bytes_read=1788531 bytes_retransmit=9 bytes_invalid=0 send_seq=94610 receive_seq=94610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=788097 sysload=0.26 cputime=245.186 memavail=1628916 print_time=5843.532 buffer_time=2.548 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 5833.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3195477 bytes_read=1788937 bytes_retransmit=9 bytes_invalid=0 send_seq=94628 receive_seq=94628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.8 pwm=0.738 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=788163 sysload=0.26 cputime=245.241 memavail=1628664 print_time=5844.484 buffer_time=2.499 print_stall=0 extruder: target=215 temp=215.0 pwm=0.545
Stats 5834.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3196069 bytes_read=1789324 bytes_retransmit=9 bytes_invalid=0 send_seq=94648 receive_seq=94648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=41.6 sd_pos=788261 sysload=0.26 cputime=245.295 memavail=1628684 print_time=5845.420 buffer_time=2.435 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 5835.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3196601 bytes_read=1789716 bytes_retransmit=9 bytes_invalid=0 send_seq=94666 receive_seq=94666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=54.9 pwm=0.308 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=788327 sysload=0.26 cputime=245.348 memavail=1628688 print_time=5846.238 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.9 pwm=0.566
Stats 5836.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000051 bytes_write=3197199 bytes_read=1790124 bytes_retransmit=9 bytes_invalid=0 send_seq=94685 receive_seq=94685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.427 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=788392 sysload=0.26 cputime=245.404 memavail=1628440 print_time=5847.026 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.2 pwm=0.445
Stats 5837.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3198115 bytes_read=1790541 bytes_retransmit=9 bytes_invalid=0 send_seq=94710 receive_seq=94710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.8 pwm=0.587 rpi: temp=55.0 mcu_temp: temp=41.3 sd_pos=788556 sysload=0.24 cputime=245.466 memavail=1628688 print_time=5848.389 buffer_time=2.402 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 5838.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3199079 bytes_read=1790952 bytes_retransmit=9 bytes_invalid=0 send_seq=94734 receive_seq=94734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.299 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=788862 sysload=0.24 cputime=245.527 memavail=1628916 print_time=5849.509 buffer_time=2.522 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 5839.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3199918 bytes_read=1791376 bytes_retransmit=9 bytes_invalid=0 send_seq=94758 receive_seq=94758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=789130 sysload=0.24 cputime=245.587 memavail=1628664 print_time=5850.027 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.3 pwm=0.324
Stats 5840.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3200735 bytes_read=1791779 bytes_retransmit=9 bytes_invalid=0 send_seq=94782 receive_seq=94782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.002 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=789621 sysload=0.24 cputime=245.654 memavail=1629188 print_time=5851.284 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.2 pwm=0.382
Stats 5841.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3201415 bytes_read=1792181 bytes_retransmit=9 bytes_invalid=0 send_seq=94802 receive_seq=94802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=790000 sysload=0.24 cputime=245.718 memavail=1628692 print_time=5852.290 buffer_time=2.302 print_stall=0 extruder: target=215 temp=215.1 pwm=0.519
Stats 5842.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3202104 bytes_read=1792622 bytes_retransmit=9 bytes_invalid=0 send_seq=94824 receive_seq=94824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.729 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=790348 sysload=0.22 cputime=245.781 memavail=1628948 print_time=5853.184 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.2 pwm=0.390
Stats 5843.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3202743 bytes_read=1793014 bytes_retransmit=9 bytes_invalid=0 send_seq=94845 receive_seq=94845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=790638 sysload=0.22 cputime=245.845 memavail=1628460 print_time=5854.050 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.3 pwm=0.327
Stats 5844.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3203734 bytes_read=1793451 bytes_retransmit=9 bytes_invalid=0 send_seq=94872 receive_seq=94872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=791097 sysload=0.22 cputime=245.910 memavail=1628704 print_time=5855.113 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.9 pwm=0.602
Stats 5845.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3204404 bytes_read=1793872 bytes_retransmit=9 bytes_invalid=0 send_seq=94893 receive_seq=94893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=791454 sysload=0.22 cputime=245.974 memavail=1628700 print_time=5856.032 buffer_time=2.042 print_stall=0 extruder: target=215 temp=214.9 pwm=0.617
Stats 5846.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3205155 bytes_read=1794279 bytes_retransmit=9 bytes_invalid=0 send_seq=94917 receive_seq=94917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=55.5 mcu_temp: temp=40.9 sd_pos=791799 sysload=0.22 cputime=246.039 memavail=1628700 print_time=5857.065 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.1 pwm=0.480
Stats 5847.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3205910 bytes_read=1794706 bytes_retransmit=9 bytes_invalid=0 send_seq=94939 receive_seq=94939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=55.0 mcu_temp: temp=40.9 sd_pos=792179 sysload=0.20 cputime=246.103 memavail=1628428 print_time=5858.211 buffer_time=2.220 print_stall=0 extruder: target=215 temp=214.9 pwm=0.599
Stats 5848.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3206528 bytes_read=1795122 bytes_retransmit=9 bytes_invalid=0 send_seq=94959 receive_seq=94959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.114 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=792544 sysload=0.20 cputime=246.166 memavail=1629020 print_time=5859.055 buffer_time=2.063 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 5849.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3207402 bytes_read=1795539 bytes_retransmit=9 bytes_invalid=0 send_seq=94985 receive_seq=94985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.672 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=792834 sysload=0.20 cputime=246.229 memavail=1629032 print_time=5860.056 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.2 pwm=0.371
Stats 5850.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3208045 bytes_read=1795951 bytes_retransmit=9 bytes_invalid=0 send_seq=95007 receive_seq=95007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=54.9 pwm=0.382 rpi: temp=56.0 mcu_temp: temp=40.9 sd_pos=793129 sysload=0.20 cputime=246.289 memavail=1629024 print_time=5861.115 buffer_time=2.121 print_stall=0 extruder: target=215 temp=214.9 pwm=0.589
Stats 5851.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000052 bytes_write=3208577 bytes_read=1796352 bytes_retransmit=9 bytes_invalid=0 send_seq=95024 receive_seq=95024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=793381 sysload=0.20 cputime=246.347 memavail=1628772 print_time=5862.021 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 5852.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3209239 bytes_read=1796764 bytes_retransmit=9 bytes_invalid=0 send_seq=95046 receive_seq=95046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=793661 sysload=0.26 cputime=246.410 memavail=1628772 print_time=5863.233 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 5853.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3209893 bytes_read=1797166 bytes_retransmit=9 bytes_invalid=0 send_seq=95066 receive_seq=95066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.9 sd_pos=793948 sysload=0.26 cputime=246.473 memavail=1629092 print_time=5864.291 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.1 pwm=0.525
Stats 5854.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3210351 bytes_read=1797572 bytes_retransmit=9 bytes_invalid=0 send_seq=95084 receive_seq=95084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=794141 sysload=0.26 cputime=246.532 memavail=1628528 print_time=5864.997 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.2 pwm=0.307
Stats 5855.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3211428 bytes_read=1797994 bytes_retransmit=9 bytes_invalid=0 send_seq=95111 receive_seq=95111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.585 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=794446 sysload=0.26 cputime=246.598 memavail=1629032 print_time=5866.112 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.1 pwm=0.388
Stats 5856.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3212353 bytes_read=1798411 bytes_retransmit=9 bytes_invalid=0 send_seq=95134 receive_seq=95134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.8 pwm=0.517 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=794611 sysload=0.26 cputime=246.657 memavail=1629032 print_time=5867.337 buffer_time=2.341 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 5857.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3212940 bytes_read=1798842 bytes_retransmit=9 bytes_invalid=0 send_seq=95154 receive_seq=95154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=54.9 pwm=0.196 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=794676 sysload=0.24 cputime=246.710 memavail=1628972 print_time=5868.048 buffer_time=2.052 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 5858.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3213894 bytes_read=1799269 bytes_retransmit=9 bytes_invalid=0 send_seq=95182 receive_seq=95182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.497 rpi: temp=55.0 mcu_temp: temp=41.0 sd_pos=794839 sysload=0.24 cputime=246.771 memavail=1628724 print_time=5869.697 buffer_time=2.700 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 5859.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3214467 bytes_read=1799666 bytes_retransmit=9 bytes_invalid=0 send_seq=95201 receive_seq=95201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.460 rpi: temp=57.0 mcu_temp: temp=41.5 sd_pos=794905 sysload=0.24 cputime=246.828 memavail=1628748 print_time=5870.592 buffer_time=2.594 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 5860.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3215082 bytes_read=1800087 bytes_retransmit=9 bytes_invalid=0 send_seq=95222 receive_seq=95222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=794971 sysload=0.24 cputime=246.883 memavail=1628632 print_time=5871.540 buffer_time=2.542 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 5861.2: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3215668 bytes_read=1800479 bytes_retransmit=9 bytes_invalid=0 send_seq=95243 receive_seq=95243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.0 mcu_temp: temp=40.5 sd_pos=795036 sysload=0.24 cputime=246.941 memavail=1628916 print_time=5872.537 buffer_time=2.539 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 5862.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3216238 bytes_read=1800891 bytes_retransmit=9 bytes_invalid=0 send_seq=95262 receive_seq=95262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=56.0 mcu_temp: temp=41.2 sd_pos=795101 sysload=0.22 cputime=246.999 memavail=1628948 print_time=5873.584 buffer_time=2.585 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 5863.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3216904 bytes_read=1801312 bytes_retransmit=9 bytes_invalid=0 send_seq=95283 receive_seq=95283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.597 rpi: temp=56.0 mcu_temp: temp=40.1 sd_pos=795164 sysload=0.22 cputime=247.057 memavail=1629196 print_time=5874.660 buffer_time=2.661 print_stall=0 extruder: target=215 temp=215.2 pwm=0.344
Stats 5864.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3217514 bytes_read=1801699 bytes_retransmit=9 bytes_invalid=0 send_seq=95303 receive_seq=95303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=795228 sysload=0.22 cputime=247.093 memavail=1629756 print_time=5875.771 buffer_time=2.772 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 5865.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3218167 bytes_read=1802111 bytes_retransmit=9 bytes_invalid=0 send_seq=95325 receive_seq=95325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=56.0 mcu_temp: temp=40.8 sd_pos=795291 sysload=0.22 cputime=247.151 memavail=1629980 print_time=5876.916 buffer_time=2.916 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 5866.2: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3218866 bytes_read=1802542 bytes_retransmit=9 bytes_invalid=0 send_seq=95348 receive_seq=95348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=795390 sysload=0.22 cputime=247.214 memavail=1629972 print_time=5878.095 buffer_time=3.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 5867.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000039 bytes_write=3219087 bytes_read=1802914 bytes_retransmit=9 bytes_invalid=0 send_seq=95362 receive_seq=95362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.069 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=795390 sysload=0.21 cputime=247.267 memavail=1630232 print_time=5878.095 buffer_time=2.094 print_stall=0 extruder: target=215 temp=214.9 pwm=0.596
Stats 5868.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000039 bytes_write=3219739 bytes_read=1803321 bytes_retransmit=9 bytes_invalid=0 send_seq=95383 receive_seq=95383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=795454 sysload=0.21 cputime=247.327 memavail=1630544 print_time=5879.304 buffer_time=2.302 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 5869.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000039 bytes_write=3220446 bytes_read=1803763 bytes_retransmit=9 bytes_invalid=0 send_seq=95406 receive_seq=95406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=795519 sysload=0.21 cputime=247.386 memavail=1630544 print_time=5880.535 buffer_time=2.534 print_stall=0 extruder: target=215 temp=215.2 pwm=0.369
Stats 5870.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000039 bytes_write=3221136 bytes_read=1804155 bytes_retransmit=9 bytes_invalid=0 send_seq=95427 receive_seq=95427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=56.5 mcu_temp: temp=41.2 sd_pos=795581 sysload=0.21 cputime=247.444 memavail=1630544 print_time=5881.791 buffer_time=2.789 print_stall=0 extruder: target=215 temp=215.0 pwm=0.540
Stats 5871.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3221758 bytes_read=1804577 bytes_retransmit=9 bytes_invalid=0 send_seq=95448 receive_seq=95448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=55.0 mcu_temp: temp=41.5 sd_pos=795614 sysload=0.21 cputime=247.500 memavail=1630292 print_time=5882.830 buffer_time=2.828 print_stall=0 extruder: target=215 temp=214.9 pwm=0.624
Stats 5872.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3222097 bytes_read=1804978 bytes_retransmit=9 bytes_invalid=0 send_seq=95465 receive_seq=95465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=795646 sysload=0.19 cputime=247.557 memavail=1630040 print_time=5883.069 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.2 pwm=0.387
Stats 5873.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3222733 bytes_read=1805370 bytes_retransmit=9 bytes_invalid=0 send_seq=95486 receive_seq=95486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.829 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=795741 sysload=0.19 cputime=247.613 memavail=1629788 print_time=5884.371 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.9 pwm=0.599
Stats 5874.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3223403 bytes_read=1805777 bytes_retransmit=9 bytes_invalid=0 send_seq=95507 receive_seq=95507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=795806 sysload=0.19 cputime=247.667 memavail=1629804 print_time=5885.696 buffer_time=2.692 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 5875.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3224083 bytes_read=1806198 bytes_retransmit=9 bytes_invalid=0 send_seq=95528 receive_seq=95528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=795870 sysload=0.19 cputime=247.726 memavail=1629552 print_time=5887.035 buffer_time=3.031 print_stall=0 extruder: target=215 temp=214.8 pwm=0.514
Stats 5876.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3224314 bytes_read=1806560 bytes_retransmit=9 bytes_invalid=0 send_seq=95543 receive_seq=95543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.285 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=795870 sysload=0.19 cputime=247.778 memavail=1629560 print_time=5887.035 buffer_time=2.030 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 5877.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3225000 bytes_read=1806982 bytes_retransmit=9 bytes_invalid=0 send_seq=95564 receive_seq=95564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=795935 sysload=0.17 cputime=247.838 memavail=1629608 print_time=5888.388 buffer_time=2.383 print_stall=0 extruder: target=215 temp=214.8 pwm=0.576
Stats 5878.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3225698 bytes_read=1807408 bytes_retransmit=9 bytes_invalid=0 send_seq=95586 receive_seq=95586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=55.1 pwm=0.166 rpi: temp=56.5 mcu_temp: temp=41.7 sd_pos=795999 sysload=0.17 cputime=247.894 memavail=1629864 print_time=5889.757 buffer_time=2.751 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 5879.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3226360 bytes_read=1807805 bytes_retransmit=9 bytes_invalid=0 send_seq=95608 receive_seq=95608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.460 rpi: temp=57.0 mcu_temp: temp=41.3 sd_pos=796065 sysload=0.17 cputime=247.953 memavail=1629052 print_time=5891.140 buffer_time=3.134 print_stall=0 extruder: target=215 temp=215.1 pwm=0.361
Stats 5880.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3226586 bytes_read=1808177 bytes_retransmit=9 bytes_invalid=0 send_seq=95622 receive_seq=95622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=40.6 sd_pos=796065 sysload=0.17 cputime=248.006 memavail=1628992 print_time=5891.140 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.2 pwm=0.368
Stats 5881.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000043 bytes_write=3227286 bytes_read=1808598 bytes_retransmit=9 bytes_invalid=0 send_seq=95643 receive_seq=95643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=796159 sysload=0.17 cputime=248.063 memavail=1629004 print_time=5892.538 buffer_time=2.531 print_stall=0 extruder: target=215 temp=214.8 pwm=0.630
Stats 5882.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3227972 bytes_read=1809005 bytes_retransmit=9 bytes_invalid=0 send_seq=95664 receive_seq=95664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=56.0 mcu_temp: temp=40.4 sd_pos=796224 sysload=0.24 cputime=248.122 memavail=1629256 print_time=5893.947 buffer_time=2.940 print_stall=0 extruder: target=215 temp=214.9 pwm=0.447
Stats 5883.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3228647 bytes_read=1809432 bytes_retransmit=9 bytes_invalid=0 send_seq=95686 receive_seq=95686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.166 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=796288 sysload=0.24 cputime=248.182 memavail=1629508 print_time=5895.363 buffer_time=3.355 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 5884.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3228894 bytes_read=1809813 bytes_retransmit=9 bytes_invalid=0 send_seq=95702 receive_seq=95702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=55.5 mcu_temp: temp=40.4 sd_pos=796288 sysload=0.24 cputime=248.218 memavail=1630012 print_time=5895.363 buffer_time=2.354 print_stall=0 extruder: target=215 temp=214.8 pwm=0.455
Stats 5885.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3229602 bytes_read=1810215 bytes_retransmit=9 bytes_invalid=0 send_seq=95725 receive_seq=95725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=55.5 mcu_temp: temp=41.1 sd_pos=796352 sysload=0.24 cputime=248.272 memavail=1630264 print_time=5896.786 buffer_time=2.777 print_stall=0 extruder: target=215 temp=214.8 pwm=0.525
Stats 5886.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3230284 bytes_read=1810637 bytes_retransmit=9 bytes_invalid=0 send_seq=95746 receive_seq=95746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.603 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=796416 sysload=0.24 cputime=248.331 memavail=1630012 print_time=5898.217 buffer_time=3.207 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 5887.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3230509 bytes_read=1811023 bytes_retransmit=9 bytes_invalid=0 send_seq=95760 receive_seq=95760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=796416 sysload=0.22 cputime=248.386 memavail=1630080 print_time=5898.217 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 5888.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3231151 bytes_read=1811405 bytes_retransmit=9 bytes_invalid=0 send_seq=95779 receive_seq=95779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=796482 sysload=0.22 cputime=248.444 memavail=1629828 print_time=5899.655 buffer_time=2.644 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 5889.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3231852 bytes_read=1811832 bytes_retransmit=9 bytes_invalid=0 send_seq=95801 receive_seq=95801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=796577 sysload=0.22 cputime=248.507 memavail=1629832 print_time=5901.100 buffer_time=3.088 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 5890.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3232047 bytes_read=1812198 bytes_retransmit=9 bytes_invalid=0 send_seq=95814 receive_seq=95814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=796577 sysload=0.22 cputime=248.561 memavail=1630084 print_time=5901.100 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 5891.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000042 bytes_write=3232752 bytes_read=1812595 bytes_retransmit=9 bytes_invalid=0 send_seq=95836 receive_seq=95836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=796643 sysload=0.22 cputime=248.618 memavail=1630084 print_time=5902.548 buffer_time=2.535 print_stall=0 extruder: target=215 temp=215.0 pwm=0.423
Stats 5892.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3233431 bytes_read=1813037 bytes_retransmit=9 bytes_invalid=0 send_seq=95858 receive_seq=95858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=55.1 pwm=0.133 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=796706 sysload=0.20 cputime=248.678 memavail=1630344 print_time=5903.997 buffer_time=2.984 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 5893.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3234140 bytes_read=1813453 bytes_retransmit=9 bytes_invalid=0 send_seq=95881 receive_seq=95881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=796771 sysload=0.20 cputime=248.739 memavail=1629840 print_time=5905.446 buffer_time=3.432 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 5894.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3234353 bytes_read=1813810 bytes_retransmit=9 bytes_invalid=0 send_seq=95895 receive_seq=95895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=796771 sysload=0.20 cputime=248.794 memavail=1629588 print_time=5905.446 buffer_time=2.431 print_stall=0 extruder: target=215 temp=215.1 pwm=0.482
Stats 5895.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3235040 bytes_read=1814232 bytes_retransmit=9 bytes_invalid=0 send_seq=95916 receive_seq=95916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.644 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=796834 sysload=0.20 cputime=248.856 memavail=1629572 print_time=5906.895 buffer_time=2.879 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 5896.2: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3235710 bytes_read=1814626 bytes_retransmit=9 bytes_invalid=0 send_seq=95937 receive_seq=95936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.8 pwm=0.833 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=796900 sysload=0.20 cputime=248.914 memavail=1629600 print_time=5908.343 buffer_time=3.327 print_stall=0 extruder: target=215 temp=215.1 pwm=0.317
Stats 5897.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3235951 bytes_read=1814998 bytes_retransmit=9 bytes_invalid=0 send_seq=95953 receive_seq=95952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=796900 sysload=0.19 cputime=248.972 memavail=1629640 print_time=5908.343 buffer_time=2.326 print_stall=0 extruder: target=215 temp=214.9 pwm=0.478
Stats 5898.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3236629 bytes_read=1815418 bytes_retransmit=9 bytes_invalid=0 send_seq=95975 receive_seq=95975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=796996 sysload=0.19 cputime=249.037 memavail=1629564 print_time=5909.792 buffer_time=2.775 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 5899.2: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3237310 bytes_read=1815823 bytes_retransmit=9 bytes_invalid=0 send_seq=95998 receive_seq=95998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=797061 sysload=0.19 cputime=249.099 memavail=1629116 print_time=5911.237 buffer_time=3.219 print_stall=0 extruder: target=215 temp=214.8 pwm=0.577
Stats 5900.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3237616 bytes_read=1816195 bytes_retransmit=9 bytes_invalid=0 send_seq=96015 receive_seq=96015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=54.5 mcu_temp: temp=41.7 sd_pos=797061 sysload=0.19 cputime=249.134 memavail=1629344 print_time=5911.237 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.8 pwm=0.611
Stats 5901.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3238307 bytes_read=1816622 bytes_retransmit=9 bytes_invalid=0 send_seq=96037 receive_seq=96037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=797123 sysload=0.19 cputime=249.194 memavail=1629092 print_time=5912.676 buffer_time=2.656 print_stall=0 extruder: target=215 temp=215.0 pwm=0.437
Stats 5902.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3239056 bytes_read=1817053 bytes_retransmit=9 bytes_invalid=0 send_seq=96060 receive_seq=96060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=797188 sysload=0.17 cputime=249.231 memavail=1629344 print_time=5914.108 buffer_time=3.087 print_stall=0 extruder: target=215 temp=215.0 pwm=0.406
Stats 5903.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3239281 bytes_read=1817415 bytes_retransmit=9 bytes_invalid=0 send_seq=96075 receive_seq=96075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=797188 sysload=0.17 cputime=249.286 memavail=1629596 print_time=5914.108 buffer_time=2.087 print_stall=0 extruder: target=215 temp=215.1 pwm=0.327
Stats 5904.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3240011 bytes_read=1817842 bytes_retransmit=9 bytes_invalid=0 send_seq=96098 receive_seq=96097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.289 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=797252 sysload=0.17 cputime=249.325 memavail=1629276 print_time=5915.532 buffer_time=2.510 print_stall=0 extruder: target=215 temp=215.1 pwm=0.392
Stats 5905.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000039 bytes_write=3240695 bytes_read=1818253 bytes_retransmit=9 bytes_invalid=0 send_seq=96120 receive_seq=96119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.660 rpi: temp=56.5 mcu_temp: temp=41.5 sd_pos=797318 sysload=0.17 cputime=249.385 memavail=1629280 print_time=5916.949 buffer_time=2.927 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 5906.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3241364 bytes_read=1818655 bytes_retransmit=9 bytes_invalid=0 send_seq=96140 receive_seq=96139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=797413 sysload=0.17 cputime=249.444 memavail=1629280 print_time=5918.360 buffer_time=3.335 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 5907.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3241586 bytes_read=1819047 bytes_retransmit=9 bytes_invalid=0 send_seq=96154 receive_seq=96154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=797413 sysload=0.16 cputime=249.500 memavail=1629784 print_time=5918.360 buffer_time=2.334 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 5908.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3242303 bytes_read=1819458 bytes_retransmit=9 bytes_invalid=0 send_seq=96176 receive_seq=96176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.142 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=797478 sysload=0.16 cputime=249.537 memavail=1629844 print_time=5919.759 buffer_time=2.733 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 5909.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3242921 bytes_read=1819830 bytes_retransmit=9 bytes_invalid=0 send_seq=96194 receive_seq=96193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=40.8 sd_pos=797541 sysload=0.16 cputime=249.595 memavail=1630096 print_time=5921.144 buffer_time=3.115 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 5910.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000040 bytes_write=3243175 bytes_read=1820227 bytes_retransmit=9 bytes_invalid=0 send_seq=96210 receive_seq=96209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=797541 sysload=0.16 cputime=249.637 memavail=1630096 print_time=5921.144 buffer_time=2.114 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 5911.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=3243815 bytes_read=1820653 bytes_retransmit=9 bytes_invalid=0 send_seq=96231 receive_seq=96231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=40.7 sd_pos=797607 sysload=0.16 cputime=249.696 memavail=1629592 print_time=5922.514 buffer_time=2.482 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 5912.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=3244500 bytes_read=1821050 bytes_retransmit=9 bytes_invalid=0 send_seq=96253 receive_seq=96253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=54.5 mcu_temp: temp=41.6 sd_pos=797671 sysload=0.14 cputime=249.759 memavail=1629340 print_time=5923.870 buffer_time=2.837 print_stall=0 extruder: target=215 temp=215.1 pwm=0.389
Stats 5913.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=3245209 bytes_read=1821477 bytes_retransmit=9 bytes_invalid=0 send_seq=96276 receive_seq=96275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.420 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=797737 sysload=0.14 cputime=249.819 memavail=1629096 print_time=5925.210 buffer_time=3.174 print_stall=0 extruder: target=215 temp=214.8 pwm=0.629
Stats 5914.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=3245460 bytes_read=1821863 bytes_retransmit=9 bytes_invalid=0 send_seq=96292 receive_seq=96292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.250 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=797737 sysload=0.14 cputime=249.854 memavail=1628852 print_time=5925.210 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 5915.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000045 bytes_write=3246099 bytes_read=1822250 bytes_retransmit=9 bytes_invalid=0 send_seq=96312 receive_seq=96312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=797833 sysload=0.14 cputime=249.908 memavail=1629120 print_time=5926.547 buffer_time=2.507 print_stall=0 extruder: target=215 temp=214.8 pwm=0.527
Stats 5916.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3246767 bytes_read=1822682 bytes_retransmit=9 bytes_invalid=0 send_seq=96333 receive_seq=96332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=797899 sysload=0.14 cputime=249.971 memavail=1629292 print_time=5927.841 buffer_time=2.798 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 5917.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3247401 bytes_read=1823088 bytes_retransmit=9 bytes_invalid=0 send_seq=96354 receive_seq=96353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=797931 sysload=0.13 cputime=250.030 memavail=1628800 print_time=5928.877 buffer_time=2.834 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 5918.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3247719 bytes_read=1823455 bytes_retransmit=9 bytes_invalid=0 send_seq=96370 receive_seq=96369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=797963 sysload=0.13 cputime=250.088 memavail=1628800 print_time=5929.123 buffer_time=2.078 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 5919.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3248395 bytes_read=1823887 bytes_retransmit=9 bytes_invalid=0 send_seq=96392 receive_seq=96392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=798028 sysload=0.13 cputime=250.149 memavail=1628800 print_time=5930.381 buffer_time=2.335 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 5920.3: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000038 bytes_write=3249044 bytes_read=1824293 bytes_retransmit=9 bytes_invalid=0 send_seq=96413 receive_seq=96413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=798091 sysload=0.13 cputime=250.208 memavail=1628864 print_time=5931.616 buffer_time=2.568 print_stall=0 extruder: target=215 temp=215.0 pwm=0.382
Stats 5921.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3249735 bytes_read=1824695 bytes_retransmit=9 bytes_invalid=0 send_seq=96434 receive_seq=96433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=798189 sysload=0.13 cputime=250.270 memavail=1629368 print_time=5932.844 buffer_time=2.794 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 5922.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3250404 bytes_read=1825117 bytes_retransmit=9 bytes_invalid=0 send_seq=96455 receive_seq=96454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=798252 sysload=0.12 cputime=250.330 memavail=1629376 print_time=5934.009 buffer_time=2.958 print_stall=0 extruder: target=215 temp=215.1 pwm=0.402
Stats 5923.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3251083 bytes_read=1825533 bytes_retransmit=9 bytes_invalid=0 send_seq=96478 receive_seq=96477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=798317 sysload=0.12 cputime=250.390 memavail=1629376 print_time=5935.158 buffer_time=3.105 print_stall=0 extruder: target=215 temp=214.8 pwm=0.644
Stats 5924.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3251276 bytes_read=1825890 bytes_retransmit=9 bytes_invalid=0 send_seq=96491 receive_seq=96491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=798317 sysload=0.12 cputime=250.443 memavail=1629404 print_time=5935.158 buffer_time=2.105 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 5925.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3251879 bytes_read=1826302 bytes_retransmit=9 bytes_invalid=0 send_seq=96510 receive_seq=96510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=798381 sysload=0.12 cputime=250.499 memavail=1629436 print_time=5936.274 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.0 pwm=0.402
Stats 5926.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000050 bytes_write=3252532 bytes_read=1826723 bytes_retransmit=9 bytes_invalid=0 send_seq=96531 receive_seq=96531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=798447 sysload=0.12 cputime=250.559 memavail=1629696 print_time=5937.355 buffer_time=2.297 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 5927.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000050 bytes_write=3253157 bytes_read=1827110 bytes_retransmit=9 bytes_invalid=0 send_seq=96551 receive_seq=96551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.174 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=798539 sysload=0.11 cputime=250.622 memavail=1629928 print_time=5938.410 buffer_time=2.352 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 5928.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000050 bytes_write=3253755 bytes_read=1827527 bytes_retransmit=9 bytes_invalid=0 send_seq=96571 receive_seq=96571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.706 rpi: temp=57.5 mcu_temp: temp=41.9 sd_pos=798602 sysload=0.11 cputime=250.680 memavail=1629888 print_time=5939.404 buffer_time=2.345 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 5929.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000050 bytes_write=3254621 bytes_read=1827964 bytes_retransmit=9 bytes_invalid=0 send_seq=96596 receive_seq=96596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.530 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=798665 sysload=0.11 cputime=250.745 memavail=1630216 print_time=5940.359 buffer_time=2.299 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 5930.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000050 bytes_write=3255228 bytes_read=1828356 bytes_retransmit=9 bytes_invalid=0 send_seq=96617 receive_seq=96617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=798728 sysload=0.11 cputime=250.783 memavail=1630216 print_time=5941.266 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 5931.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000050 bytes_write=3255822 bytes_read=1828763 bytes_retransmit=9 bytes_invalid=0 send_seq=96636 receive_seq=96635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=798790 sysload=0.11 cputime=250.839 memavail=1630420 print_time=5942.124 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 5932.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=3256778 bytes_read=1829199 bytes_retransmit=9 bytes_invalid=0 send_seq=96660 receive_seq=96659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.2 sd_pos=798916 sysload=0.10 cputime=250.902 memavail=1630412 print_time=5943.644 buffer_time=2.577 print_stall=0 extruder: target=215 temp=215.2 pwm=0.365
Stats 5933.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=3257346 bytes_read=1829581 bytes_retransmit=9 bytes_invalid=0 send_seq=96679 receive_seq=96678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=799012 sysload=0.10 cputime=250.958 memavail=1630456 print_time=5944.304 buffer_time=2.235 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 5934.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=3258196 bytes_read=1830027 bytes_retransmit=9 bytes_invalid=0 send_seq=96702 receive_seq=96701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.382 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=799143 sysload=0.10 cputime=251.003 memavail=1630520 print_time=5945.338 buffer_time=2.268 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 5935.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000060 bytes_write=3259779 bytes_read=1830499 bytes_retransmit=9 bytes_invalid=0 send_seq=96738 receive_seq=96738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=799642 sysload=0.10 cputime=251.067 memavail=1630520 print_time=5946.373 buffer_time=2.303 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 5936.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3260336 bytes_read=1830886 bytes_retransmit=9 bytes_invalid=0 send_seq=96755 receive_seq=96755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=799964 sysload=0.10 cputime=251.127 memavail=1630524 print_time=5947.077 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 5937.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3261123 bytes_read=1831317 bytes_retransmit=9 bytes_invalid=0 send_seq=96775 receive_seq=96775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=800563 sysload=0.09 cputime=251.172 memavail=1630524 print_time=5948.325 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.2 pwm=0.409
Stats 5938.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3261859 bytes_read=1831694 bytes_retransmit=9 bytes_invalid=0 send_seq=96794 receive_seq=96793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=801001 sysload=0.09 cputime=251.238 memavail=1630272 print_time=5949.245 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 5939.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3262479 bytes_read=1832086 bytes_retransmit=9 bytes_invalid=0 send_seq=96814 receive_seq=96814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=801456 sysload=0.09 cputime=251.302 memavail=1630220 print_time=5950.198 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.3 pwm=0.340
Stats 5940.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=3263583 bytes_read=1832542 bytes_retransmit=9 bytes_invalid=0 send_seq=96840 receive_seq=96839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=802042 sysload=0.09 cputime=251.371 memavail=1629968 print_time=5951.294 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.2 pwm=0.468
Stats 5941.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3264210 bytes_read=1832929 bytes_retransmit=9 bytes_invalid=0 send_seq=96857 receive_seq=96856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.286 rpi: temp=56.0 mcu_temp: temp=41.1 sd_pos=802513 sysload=0.09 cputime=251.440 memavail=1629968 print_time=5952.320 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.2 pwm=0.414
Stats 5942.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3264858 bytes_read=1833331 bytes_retransmit=9 bytes_invalid=0 send_seq=96877 receive_seq=96876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=55.5 mcu_temp: temp=41.5 sd_pos=802887 sysload=0.09 cputime=251.504 memavail=1629464 print_time=5953.089 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.9 pwm=0.599
Stats 5943.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3265468 bytes_read=1833737 bytes_retransmit=9 bytes_invalid=0 send_seq=96894 receive_seq=96894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=803358 sysload=0.09 cputime=251.569 memavail=1629464 print_time=5954.115 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.0 pwm=0.535
Stats 5944.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3266109 bytes_read=1834104 bytes_retransmit=9 bytes_invalid=0 send_seq=96910 receive_seq=96910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=803840 sysload=0.09 cputime=251.614 memavail=1629744 print_time=5955.141 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 5945.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3267069 bytes_read=1834511 bytes_retransmit=9 bytes_invalid=0 send_seq=96931 receive_seq=96931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.492 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=804396 sysload=0.09 cputime=251.678 memavail=1629728 print_time=5956.396 buffer_time=2.313 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 5946.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3267586 bytes_read=1834922 bytes_retransmit=9 bytes_invalid=0 send_seq=96948 receive_seq=96947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.055 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=804651 sysload=0.09 cputime=251.738 memavail=1629492 print_time=5957.098 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.0 pwm=0.550
Stats 5947.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3268157 bytes_read=1835309 bytes_retransmit=9 bytes_invalid=0 send_seq=96967 receive_seq=96967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.658 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=804993 sysload=0.08 cputime=251.799 memavail=1629508 print_time=5958.149 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.9 pwm=0.586
Stats 5948.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3268863 bytes_read=1835701 bytes_retransmit=9 bytes_invalid=0 send_seq=96986 receive_seq=96985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=805345 sysload=0.08 cputime=251.861 memavail=1629548 print_time=5959.201 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.3 pwm=0.378
Stats 5949.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3269401 bytes_read=1836107 bytes_retransmit=9 bytes_invalid=0 send_seq=97003 receive_seq=97003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.2 pwm=0.023 rpi: temp=57.0 mcu_temp: temp=41.6 sd_pos=805730 sysload=0.08 cputime=251.923 memavail=1629692 print_time=5960.253 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.0 pwm=0.565
Stats 5950.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3270008 bytes_read=1836489 bytes_retransmit=9 bytes_invalid=0 send_seq=97022 receive_seq=97022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.557 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=806084 sysload=0.08 cputime=251.986 memavail=1629476 print_time=5961.305 buffer_time=2.213 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 5951.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3271198 bytes_read=1836936 bytes_retransmit=9 bytes_invalid=0 send_seq=97049 receive_seq=97048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=806485 sysload=0.08 cputime=252.052 memavail=1629484 print_time=5962.452 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.0 pwm=0.502
Stats 5952.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3272106 bytes_read=1837372 bytes_retransmit=9 bytes_invalid=0 send_seq=97073 receive_seq=97072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=806682 sysload=0.07 cputime=252.113 memavail=1629736 print_time=5963.660 buffer_time=2.566 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 5953.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3272625 bytes_read=1837759 bytes_retransmit=9 bytes_invalid=0 send_seq=97092 receive_seq=97092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.4 sd_pos=806748 sysload=0.07 cputime=252.169 memavail=1629736 print_time=5964.370 buffer_time=2.273 print_stall=0 extruder: target=215 temp=214.9 pwm=0.645
Stats 5954.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3273282 bytes_read=1838161 bytes_retransmit=9 bytes_invalid=0 send_seq=97112 receive_seq=97112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.112 rpi: temp=56.5 mcu_temp: temp=41.1 sd_pos=806814 sysload=0.07 cputime=252.210 memavail=1629744 print_time=5965.153 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 5955.3: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3274261 bytes_read=1838596 bytes_retransmit=9 bytes_invalid=0 send_seq=97137 receive_seq=97136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=807009 sysload=0.07 cputime=252.272 memavail=1629744 print_time=5966.921 buffer_time=2.822 print_stall=0 extruder: target=215 temp=215.0 pwm=0.548
Stats 5956.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3274832 bytes_read=1838983 bytes_retransmit=9 bytes_invalid=0 send_seq=97156 receive_seq=97155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.0 sd_pos=807075 sysload=0.07 cputime=252.312 memavail=1629492 print_time=5967.850 buffer_time=2.748 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 5957.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3275412 bytes_read=1839369 bytes_retransmit=9 bytes_invalid=0 send_seq=97175 receive_seq=97174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.721 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=807167 sysload=0.07 cputime=252.369 memavail=1629496 print_time=5968.843 buffer_time=2.741 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 5958.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3276018 bytes_read=1839778 bytes_retransmit=9 bytes_invalid=0 send_seq=97196 receive_seq=97195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.861 rpi: temp=55.5 mcu_temp: temp=41.6 sd_pos=807232 sysload=0.07 cputime=252.426 memavail=1629444 print_time=5969.884 buffer_time=2.780 print_stall=0 extruder: target=215 temp=215.3 pwm=0.357
Stats 5959.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3276685 bytes_read=1840163 bytes_retransmit=9 bytes_invalid=0 send_seq=97217 receive_seq=97216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=807296 sysload=0.07 cputime=252.483 memavail=1629196 print_time=5970.956 buffer_time=2.850 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 5960.3: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000051 bytes_write=3277330 bytes_read=1840570 bytes_retransmit=9 bytes_invalid=0 send_seq=97238 receive_seq=97237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=807362 sysload=0.07 cputime=252.541 memavail=1628884 print_time=5972.062 buffer_time=2.955 print_stall=0 extruder: target=215 temp=215.2 pwm=0.415
Stats 5961.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3278003 bytes_read=1841011 bytes_retransmit=9 bytes_invalid=0 send_seq=97260 receive_seq=97259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=807426 sysload=0.07 cputime=252.600 memavail=1628572 print_time=5973.202 buffer_time=3.095 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 5962.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3278212 bytes_read=1841373 bytes_retransmit=9 bytes_invalid=0 send_seq=97274 receive_seq=97274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=807426 sysload=0.06 cputime=252.637 memavail=1628572 print_time=5973.202 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.2 pwm=0.334
Stats 5963.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3278859 bytes_read=1841785 bytes_retransmit=9 bytes_invalid=0 send_seq=97293 receive_seq=97293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.030 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=807525 sysload=0.06 cputime=252.694 memavail=1628824 print_time=5974.377 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 5964.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3279513 bytes_read=1842186 bytes_retransmit=9 bytes_invalid=0 send_seq=97313 receive_seq=97313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=807589 sysload=0.06 cputime=252.733 memavail=1628764 print_time=5975.579 buffer_time=2.469 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 5965.3: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3280146 bytes_read=1842578 bytes_retransmit=9 bytes_invalid=0 send_seq=97334 receive_seq=97334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=56.0 mcu_temp: temp=41.5 sd_pos=807654 sysload=0.06 cputime=252.791 memavail=1628764 print_time=5976.805 buffer_time=2.693 print_stall=0 extruder: target=215 temp=214.9 pwm=0.544
Stats 5966.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3280807 bytes_read=1843000 bytes_retransmit=9 bytes_invalid=0 send_seq=97353 receive_seq=97352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.491 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=807717 sysload=0.06 cputime=252.847 memavail=1628764 print_time=5978.055 buffer_time=2.940 print_stall=0 extruder: target=215 temp=214.8 pwm=0.561
Stats 5967.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3281509 bytes_read=1843411 bytes_retransmit=9 bytes_invalid=0 send_seq=97375 receive_seq=97374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=56.5 mcu_temp: temp=41.4 sd_pos=807783 sysload=0.06 cputime=252.905 memavail=1628960 print_time=5979.327 buffer_time=3.211 print_stall=0 extruder: target=215 temp=214.9 pwm=0.427
Stats 5968.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3281717 bytes_read=1843773 bytes_retransmit=9 bytes_invalid=0 send_seq=97389 receive_seq=97389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.058 rpi: temp=56.0 mcu_temp: temp=41.7 sd_pos=807783 sysload=0.06 cputime=252.959 memavail=1628960 print_time=5979.327 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.7 pwm=0.645
Stats 5969.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3282392 bytes_read=1844195 bytes_retransmit=9 bytes_invalid=0 send_seq=97410 receive_seq=97410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.910 rpi: temp=55.5 mcu_temp: temp=41.8 sd_pos=807876 sysload=0.06 cputime=253.021 memavail=1629212 print_time=5980.624 buffer_time=2.505 print_stall=0 extruder: target=215 temp=215.0 pwm=0.373
Stats 5970.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000043 bytes_write=3283066 bytes_read=1844591 bytes_retransmit=9 bytes_invalid=0 send_seq=97430 receive_seq=97429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=807941 sysload=0.06 cputime=253.078 memavail=1628956 print_time=5981.941 buffer_time=2.820 print_stall=0 extruder: target=215 temp=215.1 pwm=0.388
Stats 5971.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3283734 bytes_read=1844993 bytes_retransmit=9 bytes_invalid=0 send_seq=97450 receive_seq=97449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=808004 sysload=0.06 cputime=253.135 memavail=1628644 print_time=5983.273 buffer_time=3.152 print_stall=0 extruder: target=215 temp=214.7 pwm=0.621
Stats 5972.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3283962 bytes_read=1845390 bytes_retransmit=9 bytes_invalid=0 send_seq=97465 receive_seq=97465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=55.5 mcu_temp: temp=41.7 sd_pos=808004 sysload=0.05 cputime=253.187 memavail=1628392 print_time=5983.273 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 5973.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3284680 bytes_read=1845806 bytes_retransmit=9 bytes_invalid=0 send_seq=97488 receive_seq=97488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=808070 sysload=0.05 cputime=253.246 memavail=1628392 print_time=5984.619 buffer_time=2.494 print_stall=0 extruder: target=215 temp=214.8 pwm=0.624
Stats 5974.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3285365 bytes_read=1846198 bytes_retransmit=9 bytes_invalid=0 send_seq=97510 receive_seq=97509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=808134 sysload=0.05 cputime=253.286 memavail=1628648 print_time=5985.981 buffer_time=2.855 print_stall=0 extruder: target=215 temp=214.8 pwm=0.577
Stats 5975.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3286035 bytes_read=1846620 bytes_retransmit=9 bytes_invalid=0 send_seq=97531 receive_seq=97530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.8 pwm=0.918 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=808199 sysload=0.05 cputime=253.344 memavail=1628896 print_time=5987.357 buffer_time=3.229 print_stall=0 extruder: target=215 temp=215.1 pwm=0.373
Stats 5976.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3286275 bytes_read=1847021 bytes_retransmit=9 bytes_invalid=0 send_seq=97547 receive_seq=97547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=808199 sysload=0.05 cputime=253.398 memavail=1628656 print_time=5987.357 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 5977.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3286963 bytes_read=1847413 bytes_retransmit=9 bytes_invalid=0 send_seq=97568 receive_seq=97568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=808292 sysload=0.05 cputime=253.455 memavail=1628656 print_time=5988.760 buffer_time=2.629 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 5978.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3287638 bytes_read=1847830 bytes_retransmit=9 bytes_invalid=0 send_seq=97589 receive_seq=97588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=808356 sysload=0.05 cputime=253.513 memavail=1628408 print_time=5990.148 buffer_time=3.015 print_stall=0 extruder: target=215 temp=215.2 pwm=0.296
Stats 5979.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3287871 bytes_read=1848211 bytes_retransmit=9 bytes_invalid=0 send_seq=97604 receive_seq=97604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=54.9 pwm=0.762 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=808356 sysload=0.05 cputime=253.568 memavail=1628692 print_time=5990.148 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.8 pwm=0.603
Stats 5980.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3288563 bytes_read=1848608 bytes_retransmit=9 bytes_invalid=0 send_seq=97626 receive_seq=97626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=808420 sysload=0.05 cputime=253.629 memavail=1628660 print_time=5991.556 buffer_time=2.421 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 5981.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3289240 bytes_read=1849050 bytes_retransmit=9 bytes_invalid=0 send_seq=97648 receive_seq=97648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=808485 sysload=0.05 cputime=253.691 memavail=1628660 print_time=5992.971 buffer_time=2.834 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 5982.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3289953 bytes_read=1849461 bytes_retransmit=9 bytes_invalid=0 send_seq=97670 receive_seq=97670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.8 pwm=0.563 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=808549 sysload=0.04 cputime=253.748 memavail=1628912 print_time=5994.393 buffer_time=3.256 print_stall=0 extruder: target=215 temp=214.8 pwm=0.574
Stats 5983.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3290175 bytes_read=1849823 bytes_retransmit=9 bytes_invalid=0 send_seq=97685 receive_seq=97685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.444 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=808549 sysload=0.04 cputime=253.800 memavail=1628664 print_time=5994.393 buffer_time=2.255 print_stall=0 extruder: target=215 temp=214.8 pwm=0.600
Stats 5984.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3290864 bytes_read=1850250 bytes_retransmit=9 bytes_invalid=0 send_seq=97707 receive_seq=97707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.567 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=808615 sysload=0.04 cputime=253.858 memavail=1628724 print_time=5995.823 buffer_time=2.683 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 5985.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3291568 bytes_read=1850656 bytes_retransmit=9 bytes_invalid=0 send_seq=97729 receive_seq=97728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=808709 sysload=0.04 cputime=253.917 memavail=1628724 print_time=5997.270 buffer_time=3.128 print_stall=0 extruder: target=215 temp=214.7 pwm=0.604
Stats 5986.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3291783 bytes_read=1851038 bytes_retransmit=9 bytes_invalid=0 send_seq=97744 receive_seq=97744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=808709 sysload=0.04 cputime=253.970 memavail=1628412 print_time=5997.270 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 5987.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3292475 bytes_read=1851476 bytes_retransmit=9 bytes_invalid=0 send_seq=97766 receive_seq=97766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.302 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=808775 sysload=0.04 cputime=254.029 memavail=1628664 print_time=5998.697 buffer_time=2.553 print_stall=0 extruder: target=215 temp=214.7 pwm=0.562
Stats 5988.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3293177 bytes_read=1851882 bytes_retransmit=9 bytes_invalid=0 send_seq=97788 receive_seq=97787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=808839 sysload=0.04 cputime=254.086 memavail=1628604 print_time=6000.136 buffer_time=2.990 print_stall=0 extruder: target=215 temp=215.1 pwm=0.326
Stats 5989.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3293864 bytes_read=1852284 bytes_retransmit=9 bytes_invalid=0 send_seq=97811 receive_seq=97810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=808904 sysload=0.04 cputime=254.144 memavail=1628796 print_time=6001.575 buffer_time=3.427 print_stall=0 extruder: target=215 temp=214.8 pwm=0.634
Stats 5990.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3294084 bytes_read=1852676 bytes_retransmit=9 bytes_invalid=0 send_seq=97825 receive_seq=97825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.136 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=808904 sysload=0.04 cputime=254.197 memavail=1628740 print_time=6001.575 buffer_time=2.425 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 5991.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3294802 bytes_read=1853102 bytes_retransmit=9 bytes_invalid=0 send_seq=97847 receive_seq=97847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=808967 sysload=0.04 cputime=254.256 memavail=1628548 print_time=6003.014 buffer_time=2.862 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 5992.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3295448 bytes_read=1853494 bytes_retransmit=9 bytes_invalid=0 send_seq=97868 receive_seq=97868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=809033 sysload=0.04 cputime=254.314 memavail=1628484 print_time=6004.452 buffer_time=3.299 print_stall=0 extruder: target=215 temp=215.0 pwm=0.497
Stats 5993.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3295680 bytes_read=1853876 bytes_retransmit=9 bytes_invalid=0 send_seq=97881 receive_seq=97881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=809033 sysload=0.04 cputime=254.367 memavail=1628476 print_time=6004.452 buffer_time=2.298 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 5994.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3296351 bytes_read=1854282 bytes_retransmit=9 bytes_invalid=0 send_seq=97902 receive_seq=97902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.084 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=809126 sysload=0.04 cputime=254.406 memavail=1628472 print_time=6005.902 buffer_time=2.747 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 5995.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3297030 bytes_read=1854669 bytes_retransmit=9 bytes_invalid=0 send_seq=97923 receive_seq=97922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=809190 sysload=0.04 cputime=254.462 memavail=1628472 print_time=6007.324 buffer_time=3.167 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 5996.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3297241 bytes_read=1855076 bytes_retransmit=9 bytes_invalid=0 send_seq=97937 receive_seq=97937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=56.0 mcu_temp: temp=41.6 sd_pos=809190 sysload=0.04 cputime=254.516 memavail=1628720 print_time=6007.324 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 5997.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3297931 bytes_read=1855487 bytes_retransmit=9 bytes_invalid=0 send_seq=97959 receive_seq=97959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.422 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=809254 sysload=0.03 cputime=254.574 memavail=1628928 print_time=6008.751 buffer_time=2.590 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 5998.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3298600 bytes_read=1855874 bytes_retransmit=9 bytes_invalid=0 send_seq=97980 receive_seq=97979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.067 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=809319 sysload=0.03 cputime=254.629 memavail=1629280 print_time=6010.171 buffer_time=3.009 print_stall=0 extruder: target=215 temp=215.1 pwm=0.380
Stats 5999.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3298841 bytes_read=1856276 bytes_retransmit=9 bytes_invalid=0 send_seq=97996 receive_seq=97996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.505 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=809319 sysload=0.03 cputime=254.683 memavail=1629656 print_time=6010.171 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 6000.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3299509 bytes_read=1856677 bytes_retransmit=9 bytes_invalid=0 send_seq=98016 receive_seq=98016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=809383 sysload=0.03 cputime=254.739 memavail=1629968 print_time=6011.583 buffer_time=2.417 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 6001.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3300147 bytes_read=1857074 bytes_retransmit=9 bytes_invalid=0 send_seq=98035 receive_seq=98035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=809449 sysload=0.03 cputime=254.795 memavail=1629964 print_time=6012.989 buffer_time=2.820 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 6002.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3300849 bytes_read=1857510 bytes_retransmit=9 bytes_invalid=0 send_seq=98057 receive_seq=98056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.8 pwm=0.941 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=809545 sysload=0.03 cputime=254.855 memavail=1630020 print_time=6014.396 buffer_time=3.226 print_stall=0 extruder: target=215 temp=215.2 pwm=0.365
Stats 6003.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3301036 bytes_read=1857862 bytes_retransmit=9 bytes_invalid=0 send_seq=98069 receive_seq=98069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.272 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=809545 sysload=0.03 cputime=254.905 memavail=1630016 print_time=6014.396 buffer_time=2.225 print_stall=0 extruder: target=215 temp=214.9 pwm=0.590
Stats 6004.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3301659 bytes_read=1858244 bytes_retransmit=9 bytes_invalid=0 send_seq=98088 receive_seq=98088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.478 rpi: temp=55.0 mcu_temp: temp=42.1 sd_pos=809611 sysload=0.03 cputime=254.961 memavail=1629760 print_time=6015.772 buffer_time=2.598 print_stall=0 extruder: target=215 temp=215.2 pwm=0.380
Stats 6005.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3302354 bytes_read=1858685 bytes_retransmit=9 bytes_invalid=0 send_seq=98111 receive_seq=98110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.059 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=809675 sysload=0.03 cputime=255.020 memavail=1630012 print_time=6017.142 buffer_time=2.967 print_stall=0 extruder: target=215 temp=214.9 pwm=0.586
Stats 6006.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3303022 bytes_read=1859097 bytes_retransmit=9 bytes_invalid=0 send_seq=98133 receive_seq=98132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=809772 sysload=0.03 cputime=255.078 memavail=1629760 print_time=6018.498 buffer_time=3.321 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 6007.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3303237 bytes_read=1859459 bytes_retransmit=9 bytes_invalid=0 send_seq=98147 receive_seq=98147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=809772 sysload=0.03 cputime=255.131 memavail=1629760 print_time=6018.498 buffer_time=2.321 print_stall=0 extruder: target=215 temp=215.1 pwm=0.481
Stats 6008.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3303954 bytes_read=1859900 bytes_retransmit=9 bytes_invalid=0 send_seq=98169 receive_seq=98169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=809835 sysload=0.03 cputime=255.189 memavail=1629256 print_time=6019.840 buffer_time=2.661 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 6009.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3304601 bytes_read=1860277 bytes_retransmit=9 bytes_invalid=0 send_seq=98188 receive_seq=98187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.588 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=809930 sysload=0.03 cputime=255.246 memavail=1629508 print_time=6021.166 buffer_time=2.986 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 6010.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000042 bytes_write=3305227 bytes_read=1860674 bytes_retransmit=9 bytes_invalid=0 send_seq=98207 receive_seq=98206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.779 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=809991 sysload=0.03 cputime=255.303 memavail=1629260 print_time=6022.477 buffer_time=3.295 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 6011.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3305471 bytes_read=1861090 bytes_retransmit=9 bytes_invalid=0 send_seq=98223 receive_seq=98223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.8 pwm=0.620 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=809991 sysload=0.03 cputime=255.357 memavail=1628748 print_time=6022.477 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 6012.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3306146 bytes_read=1861482 bytes_retransmit=9 bytes_invalid=0 send_seq=98244 receive_seq=98244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.8 sd_pos=810056 sysload=0.02 cputime=255.415 memavail=1628756 print_time=6023.765 buffer_time=2.581 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 6013.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3306809 bytes_read=1861874 bytes_retransmit=9 bytes_invalid=0 send_seq=98263 receive_seq=98262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.386 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=810119 sysload=0.02 cputime=255.469 memavail=1628696 print_time=6025.029 buffer_time=2.843 print_stall=0 extruder: target=215 temp=214.9 pwm=0.588
Stats 6014.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3307472 bytes_read=1862305 bytes_retransmit=9 bytes_invalid=0 send_seq=98285 receive_seq=98285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.283 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=810184 sysload=0.02 cputime=255.525 memavail=1628956 print_time=6026.270 buffer_time=3.083 print_stall=0 extruder: target=215 temp=215.0 pwm=0.399
Stats 6015.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000047 bytes_write=3307664 bytes_read=1862651 bytes_retransmit=9 bytes_invalid=0 send_seq=98298 receive_seq=98298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=810184 sysload=0.02 cputime=255.577 memavail=1629460 print_time=6026.270 buffer_time=2.083 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 6016.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3308302 bytes_read=1863056 bytes_retransmit=9 bytes_invalid=0 send_seq=98318 receive_seq=98318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.584 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=810248 sysload=0.02 cputime=255.617 memavail=1629152 print_time=6027.487 buffer_time=2.299 print_stall=0 extruder: target=215 temp=214.9 pwm=0.511
Stats 6017.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3308974 bytes_read=1863470 bytes_retransmit=9 bytes_invalid=0 send_seq=98340 receive_seq=98340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=810346 sysload=0.02 cputime=255.673 memavail=1629200 print_time=6028.687 buffer_time=2.498 print_stall=0 extruder: target=215 temp=214.9 pwm=0.567
Stats 6018.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3309617 bytes_read=1863852 bytes_retransmit=9 bytes_invalid=0 send_seq=98361 receive_seq=98361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=810410 sysload=0.02 cputime=255.725 memavail=1629488 print_time=6029.843 buffer_time=2.653 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 6019.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3310251 bytes_read=1864250 bytes_retransmit=9 bytes_invalid=0 send_seq=98381 receive_seq=98381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=810476 sysload=0.02 cputime=255.776 memavail=1629772 print_time=6030.971 buffer_time=2.780 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 6020.4: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3310826 bytes_read=1864666 bytes_retransmit=9 bytes_invalid=0 send_seq=98401 receive_seq=98401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=810537 sysload=0.02 cputime=255.829 memavail=1629512 print_time=6032.064 buffer_time=2.873 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 6021.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3311458 bytes_read=1865053 bytes_retransmit=9 bytes_invalid=0 send_seq=98419 receive_seq=98418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.013 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=810628 sysload=0.02 cputime=255.886 memavail=1629008 print_time=6033.124 buffer_time=2.931 print_stall=0 extruder: target=215 temp=214.8 pwm=0.654
Stats 6022.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3312053 bytes_read=1865460 bytes_retransmit=9 bytes_invalid=0 send_seq=98439 receive_seq=98439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.072 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=810692 sysload=0.02 cputime=255.941 memavail=1629020 print_time=6034.144 buffer_time=2.951 print_stall=0 extruder: target=215 temp=215.2 pwm=0.344
Stats 6023.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3312675 bytes_read=1865881 bytes_retransmit=9 bytes_invalid=0 send_seq=98460 receive_seq=98460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=810755 sysload=0.02 cputime=255.996 memavail=1629272 print_time=6035.120 buffer_time=2.925 print_stall=0 extruder: target=215 temp=215.1 pwm=0.388
Stats 6024.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3313278 bytes_read=1866268 bytes_retransmit=9 bytes_invalid=0 send_seq=98481 receive_seq=98480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=810818 sysload=0.02 cputime=256.050 memavail=1629244 print_time=6036.048 buffer_time=2.852 print_stall=0 extruder: target=215 temp=215.2 pwm=0.359
Stats 6025.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3313889 bytes_read=1866670 bytes_retransmit=9 bytes_invalid=0 send_seq=98501 receive_seq=98500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=810912 sysload=0.02 cputime=256.106 memavail=1629464 print_time=6036.951 buffer_time=2.754 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 6026.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3314417 bytes_read=1867086 bytes_retransmit=9 bytes_invalid=0 send_seq=98518 receive_seq=98517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.273 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=810976 sysload=0.02 cputime=256.159 memavail=1629464 print_time=6037.749 buffer_time=2.552 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 6027.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3314979 bytes_read=1867468 bytes_retransmit=9 bytes_invalid=0 send_seq=98537 receive_seq=98536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.014 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=811040 sysload=0.02 cputime=256.198 memavail=1629464 print_time=6038.507 buffer_time=2.308 print_stall=0 extruder: target=215 temp=214.8 pwm=0.624
Stats 6028.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3315561 bytes_read=1867875 bytes_retransmit=9 bytes_invalid=0 send_seq=98557 receive_seq=98557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=811133 sysload=0.02 cputime=256.238 memavail=1629464 print_time=6039.224 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 6029.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3316431 bytes_read=1868301 bytes_retransmit=9 bytes_invalid=0 send_seq=98580 receive_seq=98579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.540 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=811264 sysload=0.02 cputime=256.295 memavail=1629720 print_time=6040.333 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 6030.4: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000053 bytes_write=3318036 bytes_read=1868773 bytes_retransmit=9 bytes_invalid=0 send_seq=98616 receive_seq=98616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.514 rpi: temp=55.5 mcu_temp: temp=42.1 sd_pos=811730 sysload=0.02 cputime=256.357 memavail=1629536 print_time=6041.464 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.1 pwm=0.482
Stats 6031.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3318792 bytes_read=1869195 bytes_retransmit=9 bytes_invalid=0 send_seq=98638 receive_seq=98637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=62 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.293 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=812215 sysload=0.02 cputime=256.420 memavail=1629560 print_time=6042.456 buffer_time=2.250 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 6032.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3319451 bytes_read=1869621 bytes_retransmit=9 bytes_invalid=0 send_seq=98659 receive_seq=98659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=812666 sysload=0.02 cputime=256.463 memavail=1629276 print_time=6043.371 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.8 pwm=0.581
Stats 6033.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3320075 bytes_read=1870003 bytes_retransmit=9 bytes_invalid=0 send_seq=98678 receive_seq=98678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=813109 sysload=0.02 cputime=256.526 memavail=1629276 print_time=6044.316 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.0 pwm=0.405
Stats 6034.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3320773 bytes_read=1870400 bytes_retransmit=9 bytes_invalid=0 send_seq=98695 receive_seq=98694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=54.9 pwm=0.509 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=813554 sysload=0.02 cputime=256.572 memavail=1630092 print_time=6045.231 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 6035.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3321748 bytes_read=1870826 bytes_retransmit=9 bytes_invalid=0 send_seq=98719 receive_seq=98719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=814140 sysload=0.02 cputime=256.636 memavail=1629492 print_time=6046.351 buffer_time=2.139 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 6036.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3322472 bytes_read=1871223 bytes_retransmit=9 bytes_invalid=0 send_seq=98739 receive_seq=98738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=814627 sysload=0.02 cputime=256.698 memavail=1629840 print_time=6047.370 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 6037.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3323100 bytes_read=1871630 bytes_retransmit=9 bytes_invalid=0 send_seq=98757 receive_seq=98756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.710 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=815103 sysload=0.10 cputime=256.761 memavail=1630148 print_time=6048.389 buffer_time=2.174 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 6038.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3323766 bytes_read=1872031 bytes_retransmit=9 bytes_invalid=0 send_seq=98777 receive_seq=98776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=815576 sysload=0.10 cputime=256.811 memavail=1629912 print_time=6049.329 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 6039.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3324402 bytes_read=1872403 bytes_retransmit=9 bytes_invalid=0 send_seq=98794 receive_seq=98793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=50 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.156 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=816194 sysload=0.10 cputime=256.876 memavail=1630088 print_time=6050.498 buffer_time=2.282 print_stall=0 extruder: target=215 temp=215.0 pwm=0.514
Stats 6040.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3325238 bytes_read=1872835 bytes_retransmit=9 bytes_invalid=0 send_seq=98816 receive_seq=98816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=41.6 sd_pos=816552 sysload=0.10 cputime=256.935 memavail=1630100 print_time=6051.484 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6041.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3325937 bytes_read=1873246 bytes_retransmit=9 bytes_invalid=0 send_seq=98836 receive_seq=98835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=816911 sysload=0.10 cputime=256.977 memavail=1629792 print_time=6052.528 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 6042.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3326328 bytes_read=1873623 bytes_retransmit=9 bytes_invalid=0 send_seq=98853 receive_seq=98853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.749 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=817166 sysload=0.09 cputime=257.033 memavail=1629856 print_time=6053.225 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.1 pwm=0.360
Stats 6043.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3326999 bytes_read=1874035 bytes_retransmit=9 bytes_invalid=0 send_seq=98873 receive_seq=98872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=817511 sysload=0.09 cputime=257.095 memavail=1630044 print_time=6054.270 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 6044.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3327736 bytes_read=1874441 bytes_retransmit=9 bytes_invalid=0 send_seq=98894 receive_seq=98893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=817984 sysload=0.09 cputime=257.141 memavail=1629368 print_time=6055.663 buffer_time=2.440 print_stall=0 extruder: target=215 temp=215.0 pwm=0.424
Stats 6045.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3328124 bytes_read=1874798 bytes_retransmit=9 bytes_invalid=0 send_seq=98907 receive_seq=98907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=818238 sysload=0.09 cputime=257.181 memavail=1629184 print_time=6056.359 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.2 pwm=0.424
Stats 6046.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3330840 bytes_read=1875411 bytes_retransmit=9 bytes_invalid=0 send_seq=98961 receive_seq=98961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=819227 sysload=0.09 cputime=257.252 memavail=1629184 print_time=6057.523 buffer_time=2.298 print_stall=0 extruder: target=215 temp=214.9 pwm=0.577
Stats 6047.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3332460 bytes_read=1875887 bytes_retransmit=9 bytes_invalid=0 send_seq=98997 receive_seq=98996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=819686 sysload=0.08 cputime=257.313 memavail=1629436 print_time=6058.465 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 6048.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3333969 bytes_read=1876354 bytes_retransmit=9 bytes_invalid=0 send_seq=99032 receive_seq=99032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=820011 sysload=0.08 cputime=257.377 memavail=1629752 print_time=6059.539 buffer_time=2.312 print_stall=0 extruder: target=215 temp=215.2 pwm=0.372
Stats 6049.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3335305 bytes_read=1876821 bytes_retransmit=9 bytes_invalid=0 send_seq=99062 receive_seq=99062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=57.5 mcu_temp: temp=42.6 sd_pos=820372 sysload=0.08 cputime=257.438 memavail=1629444 print_time=6060.380 buffer_time=2.152 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 6050.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3336865 bytes_read=1877297 bytes_retransmit=9 bytes_invalid=0 send_seq=99097 receive_seq=99097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=820699 sysload=0.08 cputime=257.495 memavail=1629120 print_time=6061.552 buffer_time=2.322 print_stall=0 extruder: target=215 temp=215.0 pwm=0.542
Stats 6051.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=3337847 bytes_read=1877719 bytes_retransmit=9 bytes_invalid=0 send_seq=99122 receive_seq=99121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=820831 sysload=0.08 cputime=257.550 memavail=1629184 print_time=6062.355 buffer_time=2.124 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 6052.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=3339046 bytes_read=1878191 bytes_retransmit=9 bytes_invalid=0 send_seq=99152 receive_seq=99152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=821161 sysload=0.07 cputime=257.609 memavail=1629184 print_time=6063.618 buffer_time=2.385 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6053.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=3340048 bytes_read=1878627 bytes_retransmit=9 bytes_invalid=0 send_seq=99179 receive_seq=99179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.6 sd_pos=821454 sysload=0.07 cputime=257.668 memavail=1629440 print_time=6064.523 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.3 pwm=0.298
Stats 6054.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=3341100 bytes_read=1879044 bytes_retransmit=9 bytes_invalid=0 send_seq=99205 receive_seq=99205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=821685 sysload=0.07 cputime=257.729 memavail=1629188 print_time=6065.564 buffer_time=2.330 print_stall=0 extruder: target=215 temp=215.2 pwm=0.415
Stats 6055.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=3342179 bytes_read=1879496 bytes_retransmit=9 bytes_invalid=0 send_seq=99233 receive_seq=99232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996381 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.0 sd_pos=821880 sysload=0.07 cputime=257.786 memavail=1629252 print_time=6066.818 buffer_time=2.583 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 6056.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3342816 bytes_read=1879917 bytes_retransmit=9 bytes_invalid=0 send_seq=99254 receive_seq=99253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.220 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=821946 sysload=0.07 cputime=257.840 memavail=1629252 print_time=6067.446 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.2 pwm=0.402
Stats 6057.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3343851 bytes_read=1880344 bytes_retransmit=9 bytes_invalid=0 send_seq=99281 receive_seq=99281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.0 pwm=0.460 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=822174 sysload=0.07 cputime=257.898 memavail=1629512 print_time=6068.753 buffer_time=2.516 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 6058.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3344450 bytes_read=1880756 bytes_retransmit=9 bytes_invalid=0 send_seq=99301 receive_seq=99300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.656 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=822272 sysload=0.07 cputime=257.954 memavail=1629196 print_time=6069.388 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.8 pwm=0.600
Stats 6059.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3345481 bytes_read=1881202 bytes_retransmit=9 bytes_invalid=0 send_seq=99330 receive_seq=99329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=822498 sysload=0.07 cputime=257.998 memavail=1628948 print_time=6070.648 buffer_time=2.409 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 6060.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3346085 bytes_read=1881594 bytes_retransmit=9 bytes_invalid=0 send_seq=99350 receive_seq=99350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=822564 sysload=0.07 cputime=258.050 memavail=1628888 print_time=6071.257 buffer_time=2.017 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 6061.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3347040 bytes_read=1882046 bytes_retransmit=9 bytes_invalid=0 send_seq=99375 receive_seq=99374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=822759 sysload=0.07 cputime=258.108 memavail=1628900 print_time=6072.492 buffer_time=2.251 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 6062.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3347999 bytes_read=1882482 bytes_retransmit=9 bytes_invalid=0 send_seq=99401 receive_seq=99401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=822986 sysload=0.14 cputime=258.164 memavail=1628892 print_time=6073.610 buffer_time=2.369 print_stall=0 extruder: target=215 temp=215.2 pwm=0.278
Stats 6063.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3349009 bytes_read=1882899 bytes_retransmit=9 bytes_invalid=0 send_seq=99427 receive_seq=99427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.7 sd_pos=823214 sysload=0.14 cputime=258.221 memavail=1628836 print_time=6074.595 buffer_time=2.353 print_stall=0 extruder: target=215 temp=215.1 pwm=0.362
Stats 6064.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3349941 bytes_read=1883341 bytes_retransmit=9 bytes_invalid=0 send_seq=99452 receive_seq=99452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=823411 sysload=0.14 cputime=258.276 memavail=1628764 print_time=6075.250 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 6065.5: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3351231 bytes_read=1883792 bytes_retransmit=9 bytes_invalid=0 send_seq=99483 receive_seq=99482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=823767 sysload=0.14 cputime=258.337 memavail=1628892 print_time=6076.298 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6066.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3352234 bytes_read=1884219 bytes_retransmit=9 bytes_invalid=0 send_seq=99508 receive_seq=99507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=824128 sysload=0.14 cputime=258.395 memavail=1628896 print_time=6077.681 buffer_time=2.434 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 6067.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3353091 bytes_read=1884646 bytes_retransmit=9 bytes_invalid=0 send_seq=99530 receive_seq=99529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=824324 sysload=0.13 cputime=258.452 memavail=1629400 print_time=6078.706 buffer_time=2.457 print_stall=0 extruder: target=215 temp=215.2 pwm=0.427
Stats 6068.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3353689 bytes_read=1885057 bytes_retransmit=9 bytes_invalid=0 send_seq=99551 receive_seq=99551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=824388 sysload=0.13 cputime=258.506 memavail=1629128 print_time=6079.292 buffer_time=2.042 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 6069.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3354603 bytes_read=1885464 bytes_retransmit=9 bytes_invalid=0 send_seq=99576 receive_seq=99575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.277 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=824645 sysload=0.13 cputime=258.562 memavail=1629088 print_time=6080.701 buffer_time=2.450 print_stall=0 extruder: target=215 temp=215.3 pwm=0.253
Stats 6070.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=3355125 bytes_read=1885881 bytes_retransmit=9 bytes_invalid=0 send_seq=99595 receive_seq=99595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=824776 sysload=0.13 cputime=258.614 memavail=1629404 print_time=6081.453 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 6071.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3356022 bytes_read=1886317 bytes_retransmit=9 bytes_invalid=0 send_seq=99620 receive_seq=99619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=824970 sysload=0.13 cputime=258.671 memavail=1629656 print_time=6083.074 buffer_time=2.818 print_stall=0 extruder: target=215 temp=215.2 pwm=0.436
Stats 6072.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3356596 bytes_read=1886694 bytes_retransmit=9 bytes_invalid=0 send_seq=99638 receive_seq=99637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=825034 sysload=0.12 cputime=258.725 memavail=1629408 print_time=6083.903 buffer_time=2.644 print_stall=0 extruder: target=215 temp=215.1 pwm=0.537
Stats 6073.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3357180 bytes_read=1887111 bytes_retransmit=9 bytes_invalid=0 send_seq=99657 receive_seq=99657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.475 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=825198 sysload=0.12 cputime=258.777 memavail=1629096 print_time=6085.021 buffer_time=2.762 print_stall=0 extruder: target=215 temp=215.2 pwm=0.401
Stats 6074.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3357675 bytes_read=1887507 bytes_retransmit=9 bytes_invalid=0 send_seq=99676 receive_seq=99676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.068 rpi: temp=57.5 mcu_temp: temp=42.7 sd_pos=825262 sysload=0.12 cputime=258.819 memavail=1629592 print_time=6086.158 buffer_time=2.898 print_stall=0 extruder: target=215 temp=214.9 pwm=0.558
Stats 6075.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3358273 bytes_read=1887879 bytes_retransmit=9 bytes_invalid=0 send_seq=99695 receive_seq=99695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=825327 sysload=0.12 cputime=258.874 memavail=1629848 print_time=6087.335 buffer_time=3.073 print_stall=0 extruder: target=215 temp=215.1 pwm=0.406
Stats 6076.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3358554 bytes_read=1888279 bytes_retransmit=9 bytes_invalid=0 send_seq=99711 receive_seq=99711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.040 rpi: temp=56.5 mcu_temp: temp=43.1 sd_pos=825327 sysload=0.12 cputime=258.931 memavail=1629596 print_time=6087.335 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.2 pwm=0.374
Stats 6077.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3359158 bytes_read=1888669 bytes_retransmit=9 bytes_invalid=0 send_seq=99731 receive_seq=99731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.8 pwm=0.977 rpi: temp=57.0 mcu_temp: temp=43.0 sd_pos=825390 sysload=0.11 cputime=258.988 memavail=1629596 print_time=6088.552 buffer_time=2.287 print_stall=0 extruder: target=215 temp=215.1 pwm=0.375
Stats 6078.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3359768 bytes_read=1889042 bytes_retransmit=9 bytes_invalid=0 send_seq=99750 receive_seq=99750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.373 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=825519 sysload=0.11 cputime=259.046 memavail=1629356 print_time=6089.809 buffer_time=2.543 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 6079.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3360324 bytes_read=1889463 bytes_retransmit=9 bytes_invalid=0 send_seq=99768 receive_seq=99768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.460 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=825708 sysload=0.11 cputime=259.107 memavail=1629668 print_time=6091.079 buffer_time=2.812 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 6080.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000052 bytes_write=3360945 bytes_read=1889845 bytes_retransmit=9 bytes_invalid=0 send_seq=99788 receive_seq=99787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=825773 sysload=0.11 cputime=259.165 memavail=1629416 print_time=6092.303 buffer_time=3.034 print_stall=0 extruder: target=215 temp=215.3 pwm=0.320
Stats 6081.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3361161 bytes_read=1890227 bytes_retransmit=9 bytes_invalid=0 send_seq=99803 receive_seq=99803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.575 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=825773 sysload=0.11 cputime=259.221 memavail=1629164 print_time=6092.303 buffer_time=2.034 print_stall=0 extruder: target=215 temp=214.8 pwm=0.657
Stats 6082.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3361738 bytes_read=1890653 bytes_retransmit=9 bytes_invalid=0 send_seq=99822 receive_seq=99822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=825867 sysload=0.10 cputime=259.282 memavail=1629160 print_time=6093.562 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 6083.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3362304 bytes_read=1891035 bytes_retransmit=9 bytes_invalid=0 send_seq=99841 receive_seq=99841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=826032 sysload=0.10 cputime=259.339 memavail=1628912 print_time=6094.878 buffer_time=2.607 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 6084.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3362833 bytes_read=1891412 bytes_retransmit=9 bytes_invalid=0 send_seq=99859 receive_seq=99859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=826127 sysload=0.10 cputime=259.383 memavail=1628408 print_time=6096.214 buffer_time=2.941 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 6085.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000044 bytes_write=3363476 bytes_read=1891833 bytes_retransmit=9 bytes_invalid=0 send_seq=99878 receive_seq=99877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.148 rpi: temp=57.9 mcu_temp: temp=42.5 sd_pos=826223 sysload=0.10 cputime=259.444 memavail=1628904 print_time=6097.538 buffer_time=3.262 print_stall=0 extruder: target=215 temp=215.1 pwm=0.339
Stats 6086.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3363677 bytes_read=1892205 bytes_retransmit=9 bytes_invalid=0 send_seq=99891 receive_seq=99891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=58.4 mcu_temp: temp=42.3 sd_pos=826223 sysload=0.10 cputime=259.484 memavail=1628900 print_time=6097.538 buffer_time=2.262 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 6087.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3364222 bytes_read=1892582 bytes_retransmit=9 bytes_invalid=0 send_seq=99909 receive_seq=99909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.350 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=826349 sysload=0.09 cputime=259.539 memavail=1628908 print_time=6098.416 buffer_time=2.139 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 6088.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3364814 bytes_read=1893008 bytes_retransmit=9 bytes_invalid=0 send_seq=99928 receive_seq=99928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.657 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=826479 sysload=0.09 cputime=259.598 memavail=1628656 print_time=6099.279 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.0 pwm=0.427
Stats 6089.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3365775 bytes_read=1893415 bytes_retransmit=9 bytes_invalid=0 send_seq=99953 receive_seq=99952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=826706 sysload=0.09 cputime=259.646 memavail=1628652 print_time=6101.020 buffer_time=2.739 print_stall=0 extruder: target=215 temp=215.2 pwm=0.339
Stats 6090.5: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3366373 bytes_read=1893812 bytes_retransmit=9 bytes_invalid=0 send_seq=99971 receive_seq=99971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.022 rpi: temp=57.0 mcu_temp: temp=42.0 sd_pos=826929 sysload=0.09 cputime=259.705 memavail=1629168 print_time=6101.851 buffer_time=2.563 print_stall=0 extruder: target=215 temp=215.2 pwm=0.417
Stats 6091.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3366959 bytes_read=1894243 bytes_retransmit=9 bytes_invalid=0 send_seq=99991 receive_seq=99991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=827061 sysload=0.09 cputime=259.765 memavail=1628856 print_time=6102.667 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 6092.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3367504 bytes_read=1894620 bytes_retransmit=9 bytes_invalid=0 send_seq=100009 receive_seq=100009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.430 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=827189 sysload=0.08 cputime=259.824 memavail=1628860 print_time=6103.442 buffer_time=2.152 print_stall=0 extruder: target=215 temp=215.1 pwm=0.578
Stats 6093.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3368351 bytes_read=1895042 bytes_retransmit=9 bytes_invalid=0 send_seq=100033 receive_seq=100033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=57.5 mcu_temp: temp=42.7 sd_pos=827386 sysload=0.08 cputime=259.890 memavail=1628860 print_time=6104.931 buffer_time=2.640 print_stall=0 extruder: target=215 temp=215.0 pwm=0.574
Stats 6094.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3368807 bytes_read=1895448 bytes_retransmit=9 bytes_invalid=0 send_seq=100051 receive_seq=100051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=827510 sysload=0.08 cputime=259.932 memavail=1628800 print_time=6105.347 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 6095.5: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3369861 bytes_read=1895870 bytes_retransmit=9 bytes_invalid=0 send_seq=100078 receive_seq=100078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.563 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=827891 sysload=0.08 cputime=259.997 memavail=1628548 print_time=6106.480 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.589
Stats 6096.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3370868 bytes_read=1896322 bytes_retransmit=9 bytes_invalid=0 send_seq=100105 receive_seq=100105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.319 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=828174 sysload=0.08 cputime=260.065 memavail=1628532 print_time=6107.571 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 6097.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3371854 bytes_read=1896768 bytes_retransmit=9 bytes_invalid=0 send_seq=100131 receive_seq=100131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=828365 sysload=0.08 cputime=260.127 memavail=1628548 print_time=6108.424 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 6098.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3372571 bytes_read=1897160 bytes_retransmit=9 bytes_invalid=0 send_seq=100152 receive_seq=100152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.028 rpi: temp=57.5 mcu_temp: temp=42.6 sd_pos=828497 sysload=0.08 cputime=260.185 memavail=1628552 print_time=6109.729 buffer_time=2.434 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 6099.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3373171 bytes_read=1897552 bytes_retransmit=9 bytes_invalid=0 send_seq=100171 receive_seq=100170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.015 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=828720 sysload=0.08 cputime=260.247 memavail=1628804 print_time=6110.984 buffer_time=2.687 print_stall=0 extruder: target=215 temp=214.9 pwm=0.497
Stats 6100.5: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=3373780 bytes_read=1897968 bytes_retransmit=9 bytes_invalid=0 send_seq=100191 receive_seq=100190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.7 sd_pos=828849 sysload=0.08 cputime=260.306 memavail=1628804 print_time=6112.224 buffer_time=2.925 print_stall=0 extruder: target=215 temp=214.7 pwm=0.532
Stats 6101.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3374472 bytes_read=1898380 bytes_retransmit=9 bytes_invalid=0 send_seq=100213 receive_seq=100212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=828976 sysload=0.08 cputime=260.368 memavail=1629048 print_time=6113.494 buffer_time=3.193 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 6102.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3374693 bytes_read=1898757 bytes_retransmit=9 bytes_invalid=0 send_seq=100227 receive_seq=100227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=828976 sysload=0.15 cputime=260.424 memavail=1628572 print_time=6113.494 buffer_time=2.192 print_stall=0 extruder: target=215 temp=214.9 pwm=0.454
Stats 6103.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3375221 bytes_read=1899158 bytes_retransmit=9 bytes_invalid=0 send_seq=100244 receive_seq=100244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=829107 sysload=0.15 cputime=260.484 memavail=1628872 print_time=6114.773 buffer_time=2.470 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 6104.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3375830 bytes_read=1899545 bytes_retransmit=9 bytes_invalid=0 send_seq=100264 receive_seq=100264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=829202 sysload=0.15 cputime=260.543 memavail=1628932 print_time=6116.066 buffer_time=2.762 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 6105.5: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3376416 bytes_read=1899953 bytes_retransmit=9 bytes_invalid=0 send_seq=100284 receive_seq=100283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=57.5 mcu_temp: temp=42.5 sd_pos=829301 sysload=0.15 cputime=260.606 memavail=1629172 print_time=6117.331 buffer_time=3.024 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 6106.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3376659 bytes_read=1900369 bytes_retransmit=9 bytes_invalid=0 send_seq=100300 receive_seq=100300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=829301 sysload=0.15 cputime=260.661 memavail=1629148 print_time=6117.331 buffer_time=2.023 print_stall=0 extruder: target=215 temp=214.7 pwm=0.636
Stats 6107.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3377283 bytes_read=1900761 bytes_retransmit=9 bytes_invalid=0 send_seq=100321 receive_seq=100321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=57.5 mcu_temp: temp=42.7 sd_pos=829395 sysload=0.14 cputime=260.723 memavail=1629424 print_time=6118.599 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.1 pwm=0.394
Stats 6108.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3377850 bytes_read=1901168 bytes_retransmit=9 bytes_invalid=0 send_seq=100340 receive_seq=100339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=22 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.546 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=829491 sysload=0.14 cputime=260.782 memavail=1629672 print_time=6119.842 buffer_time=2.533 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 6109.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3378490 bytes_read=1901569 bytes_retransmit=9 bytes_invalid=0 send_seq=100360 receive_seq=100359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=829587 sysload=0.14 cputime=260.841 memavail=1629928 print_time=6121.093 buffer_time=2.783 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 6110.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3379091 bytes_read=1901951 bytes_retransmit=9 bytes_invalid=0 send_seq=100379 receive_seq=100378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=829685 sysload=0.14 cputime=260.899 memavail=1629676 print_time=6122.306 buffer_time=2.996 print_stall=0 extruder: target=215 temp=215.0 pwm=0.452
Stats 6111.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3379302 bytes_read=1902358 bytes_retransmit=9 bytes_invalid=0 send_seq=100393 receive_seq=100393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=829685 sysload=0.14 cputime=260.956 memavail=1629928 print_time=6122.306 buffer_time=1.993 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6112.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3379971 bytes_read=1902774 bytes_retransmit=9 bytes_invalid=0 send_seq=100416 receive_seq=100416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=829780 sysload=0.13 cputime=261.015 memavail=1629676 print_time=6123.476 buffer_time=2.162 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 6113.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3380530 bytes_read=1903146 bytes_retransmit=9 bytes_invalid=0 send_seq=100433 receive_seq=100433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=829845 sysload=0.13 cputime=261.074 memavail=1629928 print_time=6124.609 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 6114.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3381132 bytes_read=1903563 bytes_retransmit=9 bytes_invalid=0 send_seq=100453 receive_seq=100453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=829972 sysload=0.13 cputime=261.130 memavail=1630180 print_time=6125.728 buffer_time=2.411 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 6115.6: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3381715 bytes_read=1903964 bytes_retransmit=9 bytes_invalid=0 send_seq=100473 receive_seq=100473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=830037 sysload=0.13 cputime=261.190 memavail=1629868 print_time=6126.801 buffer_time=2.483 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 6116.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3382287 bytes_read=1904356 bytes_retransmit=9 bytes_invalid=0 send_seq=100491 receive_seq=100491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=830165 sysload=0.13 cputime=261.249 memavail=1629928 print_time=6127.866 buffer_time=2.546 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 6117.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3382788 bytes_read=1904748 bytes_retransmit=9 bytes_invalid=0 send_seq=100507 receive_seq=100506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=830262 sysload=0.12 cputime=261.306 memavail=1630192 print_time=6128.848 buffer_time=2.527 print_stall=0 extruder: target=215 temp=215.0 pwm=0.429
Stats 6118.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3383376 bytes_read=1905154 bytes_retransmit=9 bytes_invalid=0 send_seq=100528 receive_seq=100527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=830358 sysload=0.12 cputime=261.365 memavail=1630252 print_time=6129.529 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.0 pwm=0.372
Stats 6119.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3384272 bytes_read=1905556 bytes_retransmit=9 bytes_invalid=0 send_seq=100551 receive_seq=100550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.264 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=830549 sysload=0.12 cputime=261.422 memavail=1629944 print_time=6130.827 buffer_time=2.506 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 6120.6: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000045 bytes_write=3384721 bytes_read=1905948 bytes_retransmit=9 bytes_invalid=0 send_seq=100566 receive_seq=100565 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=66 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=830614 sysload=0.12 cputime=261.472 memavail=1629688 print_time=6131.403 buffer_time=2.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 6121.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3385669 bytes_read=1906394 bytes_retransmit=9 bytes_invalid=0 send_seq=100592 receive_seq=100591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.0 sd_pos=830805 sysload=0.12 cputime=261.531 memavail=1629632 print_time=6132.490 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 6122.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3386441 bytes_read=1906786 bytes_retransmit=9 bytes_invalid=0 send_seq=100613 receive_seq=100612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.027 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=830996 sysload=0.11 cputime=261.575 memavail=1629444 print_time=6133.409 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.1 pwm=0.374
Stats 6123.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3387589 bytes_read=1907253 bytes_retransmit=9 bytes_invalid=0 send_seq=100642 receive_seq=100642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=831504 sysload=0.11 cputime=261.644 memavail=1629448 print_time=6134.561 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.9 pwm=0.572
Stats 6124.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3390256 bytes_read=1907809 bytes_retransmit=9 bytes_invalid=0 send_seq=100694 receive_seq=100693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.548 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=832983 sysload=0.11 cputime=261.707 memavail=1629184 print_time=6136.079 buffer_time=2.748 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 6125.6: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000053 bytes_write=3391592 bytes_read=1908251 bytes_retransmit=9 bytes_invalid=0 send_seq=100725 receive_seq=100724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.007 rpi: temp=57.5 mcu_temp: temp=42.6 sd_pos=833871 sysload=0.11 cputime=261.780 memavail=1628960 print_time=6136.558 buffer_time=2.226 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 6126.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=3393137 bytes_read=1908758 bytes_retransmit=9 bytes_invalid=0 send_seq=100760 receive_seq=100759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=57.9 mcu_temp: temp=42.2 sd_pos=834735 sysload=0.11 cputime=261.852 memavail=1628960 print_time=6137.362 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 6127.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=3394304 bytes_read=1909209 bytes_retransmit=9 bytes_invalid=0 send_seq=100790 receive_seq=100789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.526 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=835081 sysload=0.10 cputime=261.916 memavail=1628952 print_time=6138.728 buffer_time=2.395 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 6128.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=3395213 bytes_read=1909621 bytes_retransmit=9 bytes_invalid=0 send_seq=100815 receive_seq=100814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.503 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=835241 sysload=0.10 cputime=261.977 memavail=1628984 print_time=6139.575 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 6129.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=3396160 bytes_read=1910068 bytes_retransmit=9 bytes_invalid=0 send_seq=100841 receive_seq=100840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=835431 sysload=0.10 cputime=262.039 memavail=1629180 print_time=6140.434 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.0 pwm=0.583
Stats 6130.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=3397384 bytes_read=1910524 bytes_retransmit=9 bytes_invalid=0 send_seq=100871 receive_seq=100871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.398 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=835685 sysload=0.10 cputime=262.101 memavail=1629152 print_time=6141.609 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 6131.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3398365 bytes_read=1910946 bytes_retransmit=9 bytes_invalid=0 send_seq=100896 receive_seq=100895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=835843 sysload=0.10 cputime=262.159 memavail=1629460 print_time=6142.359 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.0 pwm=0.567
Stats 6132.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3399614 bytes_read=1911413 bytes_retransmit=9 bytes_invalid=0 send_seq=100926 receive_seq=100925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=836222 sysload=0.09 cputime=262.224 memavail=1629524 print_time=6143.412 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 6133.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3401118 bytes_read=1911889 bytes_retransmit=9 bytes_invalid=0 send_seq=100960 receive_seq=100960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=56.5 mcu_temp: temp=43.2 sd_pos=836632 sysload=0.09 cputime=262.290 memavail=1629548 print_time=6144.625 buffer_time=2.286 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 6134.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3402409 bytes_read=1912318 bytes_retransmit=9 bytes_invalid=0 send_seq=100989 receive_seq=100989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=836977 sysload=0.09 cputime=262.331 memavail=1629556 print_time=6145.487 buffer_time=2.147 print_stall=0 extruder: target=215 temp=215.3 pwm=0.333
Stats 6135.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3403892 bytes_read=1912798 bytes_retransmit=9 bytes_invalid=0 send_seq=101024 receive_seq=101024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=837261 sysload=0.09 cputime=262.394 memavail=1628956 print_time=6146.354 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 6136.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=3408303 bytes_read=1913503 bytes_retransmit=9 bytes_invalid=0 send_seq=101105 receive_seq=101104 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.028 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=838717 sysload=0.09 cputime=262.480 memavail=1629468 print_time=6148.094 buffer_time=2.752 print_stall=0 extruder: target=215 temp=215.2 pwm=0.426
Stats 6137.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=3409924 bytes_read=1913960 bytes_retransmit=9 bytes_invalid=0 send_seq=101141 receive_seq=101140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.027 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=839206 sysload=0.08 cputime=262.543 memavail=1628904 print_time=6148.513 buffer_time=2.169 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 6138.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=3411761 bytes_read=1914467 bytes_retransmit=9 bytes_invalid=0 send_seq=101180 receive_seq=101179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.392 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=839403 sysload=0.08 cputime=262.609 memavail=1628904 print_time=6149.569 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6139.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=3412961 bytes_read=1914923 bytes_retransmit=9 bytes_invalid=0 send_seq=101211 receive_seq=101210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=839656 sysload=0.08 cputime=262.675 memavail=1628904 print_time=6150.641 buffer_time=2.294 print_stall=0 extruder: target=215 temp=215.0 pwm=0.540
Stats 6140.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=3413886 bytes_read=1915335 bytes_retransmit=9 bytes_invalid=0 send_seq=101236 receive_seq=101235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.9 pwm=0.300 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=839908 sysload=0.08 cputime=262.737 memavail=1628592 print_time=6151.740 buffer_time=2.391 print_stall=0 extruder: target=215 temp=215.0 pwm=0.487
Stats 6141.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000068 bytes_write=3414844 bytes_read=1915797 bytes_retransmit=9 bytes_invalid=0 send_seq=101262 receive_seq=101261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=840065 sysload=0.08 cputime=262.797 memavail=1629104 print_time=6152.891 buffer_time=2.541 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 6142.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000068 bytes_write=3415449 bytes_read=1916198 bytes_retransmit=9 bytes_invalid=0 send_seq=101282 receive_seq=101281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=840160 sysload=0.08 cputime=262.854 memavail=1628600 print_time=6153.485 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.0 pwm=0.412
Stats 6143.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000068 bytes_write=3416439 bytes_read=1916615 bytes_retransmit=9 bytes_invalid=0 send_seq=101308 receive_seq=101307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.8 pwm=0.718 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=840380 sysload=0.08 cputime=262.918 memavail=1628852 print_time=6154.695 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.2 pwm=0.300
Stats 6144.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000068 bytes_write=3417403 bytes_read=1917072 bytes_retransmit=9 bytes_invalid=0 send_seq=101335 receive_seq=101335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.477 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=840802 sysload=0.08 cputime=262.977 memavail=1628740 print_time=6155.588 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.0 pwm=0.497
Stats 6145.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000068 bytes_write=3418072 bytes_read=1917463 bytes_retransmit=9 bytes_invalid=0 send_seq=101354 receive_seq=101353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=841148 sysload=0.08 cputime=263.037 memavail=1628488 print_time=6156.449 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.593
Stats 6146.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3418733 bytes_read=1917870 bytes_retransmit=9 bytes_invalid=0 send_seq=101375 receive_seq=101374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.8 sd_pos=841540 sysload=0.08 cputime=263.099 memavail=1628488 print_time=6157.449 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.8 pwm=0.584
Stats 6147.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3419394 bytes_read=1918302 bytes_retransmit=9 bytes_invalid=0 send_seq=101397 receive_seq=101397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=41.9 sd_pos=841893 sysload=0.07 cputime=263.161 memavail=1628744 print_time=6158.419 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.4 pwm=0.173
Stats 6148.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3420165 bytes_read=1918708 bytes_retransmit=9 bytes_invalid=0 send_seq=101419 receive_seq=101418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=842368 sysload=0.07 cputime=263.225 memavail=1628548 print_time=6159.665 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 6149.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3420961 bytes_read=1919105 bytes_retransmit=9 bytes_invalid=0 send_seq=101441 receive_seq=101440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=842682 sysload=0.07 cputime=263.285 memavail=1628816 print_time=6160.444 buffer_time=2.083 print_stall=0 extruder: target=215 temp=214.8 pwm=0.569
Stats 6150.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3421645 bytes_read=1919527 bytes_retransmit=9 bytes_invalid=0 send_seq=101462 receive_seq=101461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.488 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=843067 sysload=0.07 cputime=263.349 memavail=1628876 print_time=6161.455 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.3 pwm=0.264
Stats 6151.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3422375 bytes_read=1919953 bytes_retransmit=9 bytes_invalid=0 send_seq=101484 receive_seq=101483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=843456 sysload=0.07 cputime=263.413 memavail=1628876 print_time=6162.483 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 6152.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3423053 bytes_read=1920340 bytes_retransmit=9 bytes_invalid=0 send_seq=101503 receive_seq=101503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.476 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=843842 sysload=0.06 cputime=263.475 memavail=1628876 print_time=6163.605 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.3 pwm=0.317
Stats 6153.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3423760 bytes_read=1920752 bytes_retransmit=9 bytes_invalid=0 send_seq=101523 receive_seq=101522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.401 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=844198 sysload=0.06 cputime=263.538 memavail=1628884 print_time=6164.446 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.9 pwm=0.609
Stats 6154.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3424597 bytes_read=1921173 bytes_retransmit=9 bytes_invalid=0 send_seq=101546 receive_seq=101546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=844574 sysload=0.06 cputime=263.585 memavail=1628824 print_time=6165.757 buffer_time=2.388 print_stall=0 extruder: target=215 temp=214.8 pwm=0.588
Stats 6155.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000057 bytes_write=3425027 bytes_read=1921545 bytes_retransmit=9 bytes_invalid=0 send_seq=101563 receive_seq=101563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=844766 sysload=0.06 cputime=263.644 memavail=1628832 print_time=6166.449 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 6156.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3425747 bytes_read=1922001 bytes_retransmit=9 bytes_invalid=0 send_seq=101585 receive_seq=101585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=845121 sysload=0.06 cputime=263.711 memavail=1628908 print_time=6167.833 buffer_time=2.460 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 6157.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3426390 bytes_read=1922383 bytes_retransmit=9 bytes_invalid=0 send_seq=101604 receive_seq=101604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=54.9 pwm=0.648 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=845413 sysload=0.06 cputime=263.774 memavail=1628824 print_time=6168.870 buffer_time=2.497 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 6158.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3426777 bytes_read=1922750 bytes_retransmit=9 bytes_invalid=0 send_seq=101620 receive_seq=101620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=54.9 pwm=0.552 rpi: temp=57.5 mcu_temp: temp=42.1 sd_pos=845602 sysload=0.06 cputime=263.834 memavail=1628824 print_time=6169.562 buffer_time=2.188 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 6159.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3427385 bytes_read=1923171 bytes_retransmit=9 bytes_invalid=0 send_seq=101639 receive_seq=101638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=845854 sysload=0.06 cputime=263.899 memavail=1629080 print_time=6170.451 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 6160.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3428599 bytes_read=1923608 bytes_retransmit=9 bytes_invalid=0 send_seq=101669 receive_seq=101668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=846150 sysload=0.06 cputime=263.964 memavail=1628768 print_time=6171.717 buffer_time=2.341 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 6161.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3429474 bytes_read=1924055 bytes_retransmit=9 bytes_invalid=0 send_seq=101694 receive_seq=101694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=846373 sysload=0.06 cputime=264.028 memavail=1628516 print_time=6172.760 buffer_time=2.383 print_stall=0 extruder: target=215 temp=215.0 pwm=0.498
Stats 6162.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3430435 bytes_read=1924496 bytes_retransmit=9 bytes_invalid=0 send_seq=101719 receive_seq=101719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=846565 sysload=0.05 cputime=264.091 memavail=1628516 print_time=6173.872 buffer_time=2.493 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 6163.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3431053 bytes_read=1924888 bytes_retransmit=9 bytes_invalid=0 send_seq=101740 receive_seq=101740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.462 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=846660 sysload=0.05 cputime=264.148 memavail=1628520 print_time=6174.440 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 6164.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3431962 bytes_read=1925321 bytes_retransmit=9 bytes_invalid=0 send_seq=101765 receive_seq=101764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=8 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=846818 sysload=0.05 cputime=264.209 memavail=1628832 print_time=6175.558 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 6165.6: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3432922 bytes_read=1925767 bytes_retransmit=9 bytes_invalid=0 send_seq=101791 receive_seq=101790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.122 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=847100 sysload=0.05 cputime=264.272 memavail=1628840 print_time=6176.689 buffer_time=2.310 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 6166.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=3433809 bytes_read=1926179 bytes_retransmit=9 bytes_invalid=0 send_seq=101813 receive_seq=101812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=847476 sysload=0.05 cputime=264.336 memavail=1628588 print_time=6177.738 buffer_time=2.358 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 6167.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=3434721 bytes_read=1926606 bytes_retransmit=9 bytes_invalid=0 send_seq=101837 receive_seq=101837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=847697 sysload=0.05 cputime=264.398 memavail=1628580 print_time=6178.674 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.1 pwm=0.402
Stats 6168.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=3435573 bytes_read=1927032 bytes_retransmit=9 bytes_invalid=0 send_seq=101859 receive_seq=101859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=56.0 mcu_temp: temp=41.8 sd_pos=847856 sysload=0.05 cputime=264.459 memavail=1628840 print_time=6179.597 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.8 pwm=0.600
Stats 6169.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=3436501 bytes_read=1927424 bytes_retransmit=9 bytes_invalid=0 send_seq=101881 receive_seq=101880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.014 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=848015 sysload=0.05 cputime=264.519 memavail=1629092 print_time=6180.458 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 6170.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000060 bytes_write=3437737 bytes_read=1927876 bytes_retransmit=9 bytes_invalid=0 send_seq=101911 receive_seq=101910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996378 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=56.5 mcu_temp: temp=43.8 sd_pos=848269 sysload=0.05 cputime=264.584 memavail=1629348 print_time=6181.623 buffer_time=2.238 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 6171.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3438901 bytes_read=1928352 bytes_retransmit=9 bytes_invalid=0 send_seq=101939 receive_seq=101939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.438 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=848587 sysload=0.05 cputime=264.644 memavail=1629352 print_time=6182.666 buffer_time=2.282 print_stall=0 extruder: target=215 temp=215.1 pwm=0.394
Stats 6172.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3440023 bytes_read=1928774 bytes_retransmit=9 bytes_invalid=0 send_seq=101966 receive_seq=101966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=57.5 mcu_temp: temp=42.6 sd_pos=848842 sysload=0.05 cputime=264.704 memavail=1629348 print_time=6183.557 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 6173.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3441725 bytes_read=1929266 bytes_retransmit=9 bytes_invalid=0 send_seq=102004 receive_seq=102004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=849251 sysload=0.05 cputime=264.770 memavail=1629348 print_time=6184.670 buffer_time=2.280 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 6174.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3442940 bytes_read=1929722 bytes_retransmit=9 bytes_invalid=0 send_seq=102032 receive_seq=102032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=849538 sysload=0.05 cputime=264.811 memavail=1628596 print_time=6185.476 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 6175.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3444428 bytes_read=1930169 bytes_retransmit=9 bytes_invalid=0 send_seq=102064 receive_seq=102064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996387 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=850013 sysload=0.05 cputime=264.875 memavail=1628596 print_time=6186.502 buffer_time=2.111 print_stall=0 extruder: target=215 temp=214.9 pwm=0.594
Stats 6176.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000040 bytes_write=3446861 bytes_read=1930726 bytes_retransmit=9 bytes_invalid=0 send_seq=102112 receive_seq=102112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996386 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=850749 sysload=0.05 cputime=264.948 memavail=1628792 print_time=6187.428 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.0 pwm=0.515
Stats 6177.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000040 bytes_write=3447992 bytes_read=1931177 bytes_retransmit=9 bytes_invalid=0 send_seq=102139 receive_seq=102139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996384 heater_bed: target=55 temp=54.9 pwm=0.565 rpi: temp=57.5 mcu_temp: temp=42.2 sd_pos=851111 sysload=0.04 cputime=265.012 memavail=1628792 print_time=6188.742 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 6178.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000040 bytes_write=3448812 bytes_read=1931574 bytes_retransmit=9 bytes_invalid=0 send_seq=102161 receive_seq=102161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996383 heater_bed: target=55 temp=55.1 pwm=0.070 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=851274 sysload=0.04 cputime=265.072 memavail=1628792 print_time=6189.685 buffer_time=2.292 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 6179.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000040 bytes_write=3449824 bytes_read=1931996 bytes_retransmit=9 bytes_invalid=0 send_seq=102186 receive_seq=102185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.1 pwm=0.220 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=851534 sysload=0.04 cputime=265.134 memavail=1629044 print_time=6190.842 buffer_time=2.449 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 6180.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000040 bytes_write=3450319 bytes_read=1932407 bytes_retransmit=9 bytes_invalid=0 send_seq=102204 receive_seq=102204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=56.0 mcu_temp: temp=41.3 sd_pos=851598 sysload=0.04 cputime=265.190 memavail=1629296 print_time=6191.499 buffer_time=2.103 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 6181.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000040 bytes_write=3450880 bytes_read=1932804 bytes_retransmit=9 bytes_invalid=0 send_seq=102223 receive_seq=102223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=851728 sysload=0.04 cputime=265.247 memavail=1629356 print_time=6192.405 buffer_time=2.009 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 6182.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3451675 bytes_read=1933216 bytes_retransmit=9 bytes_invalid=0 send_seq=102245 receive_seq=102245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.1 pwm=0.015 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=851953 sysload=0.04 cputime=265.310 memavail=1629360 print_time=6194.329 buffer_time=2.930 print_stall=0 extruder: target=215 temp=214.9 pwm=0.427
Stats 6183.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3452345 bytes_read=1933632 bytes_retransmit=9 bytes_invalid=0 send_seq=102266 receive_seq=102265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=852017 sysload=0.04 cputime=265.369 memavail=1629108 print_time=6195.327 buffer_time=2.926 print_stall=0 extruder: target=215 temp=214.9 pwm=0.384
Stats 6184.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3452897 bytes_read=1934014 bytes_retransmit=9 bytes_invalid=0 send_seq=102285 receive_seq=102284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=852114 sysload=0.04 cputime=265.412 memavail=1629352 print_time=6196.366 buffer_time=2.963 print_stall=0 extruder: target=215 temp=214.8 pwm=0.468
Stats 6185.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000056 bytes_write=3453555 bytes_read=1934426 bytes_retransmit=9 bytes_invalid=0 send_seq=102307 receive_seq=102306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996374 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=852178 sysload=0.04 cputime=265.473 memavail=1629424 print_time=6197.389 buffer_time=2.985 print_stall=0 extruder: target=215 temp=214.8 pwm=0.489
Stats 6186.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3454216 bytes_read=1934867 bytes_retransmit=9 bytes_invalid=0 send_seq=102329 receive_seq=102328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=54.9 pwm=0.685 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=852243 sysload=0.04 cputime=265.534 memavail=1629424 print_time=6198.443 buffer_time=3.037 print_stall=0 extruder: target=215 temp=215.2 pwm=0.265
Stats 6187.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3454433 bytes_read=1935229 bytes_retransmit=9 bytes_invalid=0 send_seq=102343 receive_seq=102343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=852243 sysload=0.03 cputime=265.591 memavail=1629088 print_time=6198.443 buffer_time=2.036 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 6188.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3454959 bytes_read=1935636 bytes_retransmit=9 bytes_invalid=0 send_seq=102361 receive_seq=102361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=57.0 mcu_temp: temp=41.7 sd_pos=852338 sysload=0.03 cputime=265.648 memavail=1629340 print_time=6199.572 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 6189.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3455570 bytes_read=1936032 bytes_retransmit=9 bytes_invalid=0 send_seq=102380 receive_seq=102380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.600 rpi: temp=55.5 mcu_temp: temp=41.4 sd_pos=852469 sysload=0.03 cputime=265.707 memavail=1629340 print_time=6200.734 buffer_time=2.326 print_stall=0 extruder: target=215 temp=215.2 pwm=0.412
Stats 6190.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3456122 bytes_read=1936409 bytes_retransmit=9 bytes_invalid=0 send_seq=102398 receive_seq=102398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=852564 sysload=0.03 cputime=265.766 memavail=1629352 print_time=6201.943 buffer_time=2.534 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 6191.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3456713 bytes_read=1936831 bytes_retransmit=9 bytes_invalid=0 send_seq=102417 receive_seq=102416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=852695 sysload=0.03 cputime=265.824 memavail=1629100 print_time=6203.166 buffer_time=2.756 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 6192.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3457274 bytes_read=1937227 bytes_retransmit=9 bytes_invalid=0 send_seq=102436 receive_seq=102435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=56.5 mcu_temp: temp=42.5 sd_pos=852823 sysload=0.03 cputime=265.881 memavail=1629412 print_time=6204.421 buffer_time=3.009 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 6193.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3457454 bytes_read=1937579 bytes_retransmit=9 bytes_invalid=0 send_seq=102448 receive_seq=102448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=852823 sysload=0.03 cputime=265.936 memavail=1629160 print_time=6204.421 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 6194.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3458062 bytes_read=1937983 bytes_retransmit=9 bytes_invalid=0 send_seq=102467 receive_seq=102467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=57.0 mcu_temp: temp=42.1 sd_pos=852988 sysload=0.03 cputime=265.994 memavail=1628792 print_time=6205.657 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.8 pwm=0.606
Stats 6195.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3458653 bytes_read=1938378 bytes_retransmit=9 bytes_invalid=0 send_seq=102488 receive_seq=102488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.3 sd_pos=853145 sysload=0.03 cputime=266.050 memavail=1628852 print_time=6206.931 buffer_time=2.516 print_stall=0 extruder: target=215 temp=215.2 pwm=0.319
Stats 6196.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3459191 bytes_read=1938765 bytes_retransmit=9 bytes_invalid=0 send_seq=102507 receive_seq=102507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=853309 sysload=0.03 cputime=266.110 memavail=1629132 print_time=6208.174 buffer_time=2.757 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 6197.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3459886 bytes_read=1939172 bytes_retransmit=9 bytes_invalid=0 send_seq=102528 receive_seq=102527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.462 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=853436 sysload=0.03 cputime=266.173 memavail=1628820 print_time=6209.423 buffer_time=3.004 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 6198.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3460129 bytes_read=1939558 bytes_retransmit=9 bytes_invalid=0 send_seq=102544 receive_seq=102544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=853436 sysload=0.03 cputime=266.229 memavail=1628820 print_time=6209.423 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.2 pwm=0.387
Stats 6199.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3460707 bytes_read=1939945 bytes_retransmit=9 bytes_invalid=0 send_seq=102564 receive_seq=102564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.555 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=853535 sysload=0.03 cputime=266.285 memavail=1628880 print_time=6210.623 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.2 pwm=0.333
Stats 6200.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000046 bytes_write=3461394 bytes_read=1940362 bytes_retransmit=9 bytes_invalid=0 send_seq=102584 receive_seq=102584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=57.0 mcu_temp: temp=42.4 sd_pos=853723 sysload=0.03 cputime=266.346 memavail=1628824 print_time=6211.839 buffer_time=2.418 print_stall=0 extruder: target=215 temp=215.2 pwm=0.314
Stats 6201.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3461940 bytes_read=1940773 bytes_retransmit=9 bytes_invalid=0 send_seq=102603 receive_seq=102603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.526 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=853854 sysload=0.03 cputime=266.407 memavail=1628572 print_time=6212.947 buffer_time=2.524 print_stall=0 extruder: target=215 temp=214.9 pwm=0.583
Stats 6202.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3462673 bytes_read=1941175 bytes_retransmit=9 bytes_invalid=0 send_seq=102627 receive_seq=102626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.168 rpi: temp=55.0 mcu_temp: temp=42.3 sd_pos=854014 sysload=0.03 cputime=266.467 memavail=1628820 print_time=6214.039 buffer_time=2.615 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 6203.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3463318 bytes_read=1941597 bytes_retransmit=9 bytes_invalid=0 send_seq=102648 receive_seq=102647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=854143 sysload=0.03 cputime=266.524 memavail=1628576 print_time=6215.072 buffer_time=2.646 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 6204.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3463873 bytes_read=1941998 bytes_retransmit=9 bytes_invalid=0 send_seq=102668 receive_seq=102667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=57.0 mcu_temp: temp=42.2 sd_pos=854302 sysload=0.03 cputime=266.565 memavail=1629324 print_time=6216.066 buffer_time=2.638 print_stall=0 extruder: target=215 temp=214.9 pwm=0.561
Stats 6205.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3464444 bytes_read=1942380 bytes_retransmit=9 bytes_invalid=0 send_seq=102687 receive_seq=102686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=57.5 mcu_temp: temp=42.4 sd_pos=854370 sysload=0.03 cputime=266.623 memavail=1629580 print_time=6217.123 buffer_time=2.693 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 6206.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3465084 bytes_read=1942817 bytes_retransmit=9 bytes_invalid=0 send_seq=102708 receive_seq=102707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=57.0 mcu_temp: temp=42.5 sd_pos=854496 sysload=0.03 cputime=266.684 memavail=1629612 print_time=6218.280 buffer_time=2.850 print_stall=0 extruder: target=215 temp=215.2 pwm=0.365
Stats 6207.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3465748 bytes_read=1943223 bytes_retransmit=9 bytes_invalid=0 send_seq=102729 receive_seq=102728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.429 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=854627 sysload=0.02 cputime=266.743 memavail=1629580 print_time=6219.432 buffer_time=3.000 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 6208.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3465981 bytes_read=1943590 bytes_retransmit=9 bytes_invalid=0 send_seq=102744 receive_seq=102744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.637 rpi: temp=56.5 mcu_temp: temp=42.8 sd_pos=854627 sysload=0.02 cputime=266.799 memavail=1629296 print_time=6219.432 buffer_time=1.999 print_stall=0 extruder: target=215 temp=214.8 pwm=0.658
Stats 6209.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3466562 bytes_read=1944012 bytes_retransmit=9 bytes_invalid=0 send_seq=102765 receive_seq=102765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=854754 sysload=0.02 cputime=266.859 memavail=1629052 print_time=6220.611 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 6210.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3467206 bytes_read=1944423 bytes_retransmit=9 bytes_invalid=0 send_seq=102787 receive_seq=102787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=854853 sysload=0.02 cputime=266.920 memavail=1629584 print_time=6221.777 buffer_time=2.341 print_stall=0 extruder: target=215 temp=215.1 pwm=0.361
Stats 6211.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3467829 bytes_read=1944825 bytes_retransmit=9 bytes_invalid=0 send_seq=102807 receive_seq=102807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=854981 sysload=0.02 cputime=266.978 memavail=1629336 print_time=6222.967 buffer_time=2.530 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 6212.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3468384 bytes_read=1945237 bytes_retransmit=9 bytes_invalid=0 send_seq=102827 receive_seq=102826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.543 rpi: temp=56.0 mcu_temp: temp=41.9 sd_pos=855108 sysload=0.02 cputime=267.040 memavail=1629336 print_time=6223.480 buffer_time=2.040 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 6213.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3469200 bytes_read=1945648 bytes_retransmit=9 bytes_invalid=0 send_seq=102849 receive_seq=102848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.537 rpi: temp=57.0 mcu_temp: temp=42.8 sd_pos=855331 sysload=0.02 cputime=267.103 memavail=1629144 print_time=6224.433 buffer_time=1.991 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6214.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3470091 bytes_read=1946055 bytes_retransmit=9 bytes_invalid=0 send_seq=102872 receive_seq=102872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=56.5 mcu_temp: temp=42.1 sd_pos=855616 sysload=0.02 cputime=267.152 memavail=1629144 print_time=6225.932 buffer_time=2.489 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6215.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000047 bytes_write=3470904 bytes_read=1946487 bytes_retransmit=9 bytes_invalid=0 send_seq=102895 receive_seq=102895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=855746 sysload=0.02 cputime=267.212 memavail=1629204 print_time=6227.177 buffer_time=2.732 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 6216.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3471491 bytes_read=1946903 bytes_retransmit=9 bytes_invalid=0 send_seq=102916 receive_seq=102915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.415 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=855810 sysload=0.02 cputime=267.268 memavail=1628948 print_time=6227.941 buffer_time=2.496 print_stall=0 extruder: target=215 temp=215.2 pwm=0.442
Stats 6217.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3472001 bytes_read=1947295 bytes_retransmit=9 bytes_invalid=0 send_seq=102936 receive_seq=102936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.4 sd_pos=855878 sysload=0.02 cputime=267.328 memavail=1629216 print_time=6228.664 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.0 pwm=0.594
Stats 6218.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3472720 bytes_read=1947727 bytes_retransmit=9 bytes_invalid=0 send_seq=102959 receive_seq=102959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=856035 sysload=0.02 cputime=267.390 memavail=1628964 print_time=6230.009 buffer_time=2.563 print_stall=0 extruder: target=215 temp=215.2 pwm=0.434
Stats 6219.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3473286 bytes_read=1948118 bytes_retransmit=9 bytes_invalid=0 send_seq=102978 receive_seq=102977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.3 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=856101 sysload=0.02 cputime=267.449 memavail=1629224 print_time=6231.208 buffer_time=2.760 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 6220.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000049 bytes_write=3473815 bytes_read=1948500 bytes_retransmit=9 bytes_invalid=0 send_seq=102996 receive_seq=102996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.3 sd_pos=856229 sysload=0.02 cputime=267.509 memavail=1629164 print_time=6232.429 buffer_time=2.981 print_stall=0 extruder: target=215 temp=215.3 pwm=0.326
Stats 6221.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3474435 bytes_read=1948927 bytes_retransmit=9 bytes_invalid=0 send_seq=103016 receive_seq=103015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.583 rpi: temp=57.0 mcu_temp: temp=41.9 sd_pos=856294 sysload=0.02 cputime=267.554 memavail=1629476 print_time=6233.544 buffer_time=3.093 print_stall=0 extruder: target=215 temp=215.3 pwm=0.399
Stats 6222.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3474672 bytes_read=1949303 bytes_retransmit=9 bytes_invalid=0 send_seq=103031 receive_seq=103030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=856294 sysload=0.02 cputime=267.609 memavail=1629724 print_time=6233.544 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.1 pwm=0.534
Stats 6223.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3475269 bytes_read=1949711 bytes_retransmit=9 bytes_invalid=0 send_seq=103052 receive_seq=103052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=856422 sysload=0.02 cputime=267.668 memavail=1629468 print_time=6234.680 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 6224.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3475806 bytes_read=1950128 bytes_retransmit=9 bytes_invalid=0 send_seq=103072 receive_seq=103072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.414 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=856486 sysload=0.02 cputime=267.727 memavail=1629780 print_time=6235.702 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.2 pwm=0.407
Stats 6225.7: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000018 mcu_task_stddev=0.000051 bytes_write=3476382 bytes_read=1950524 bytes_retransmit=9 bytes_invalid=0 send_seq=103091 receive_seq=103091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=856614 sysload=0.02 cputime=267.784 memavail=1629476 print_time=6236.741 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 6226.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3476923 bytes_read=1950926 bytes_retransmit=9 bytes_invalid=0 send_seq=103111 receive_seq=103111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.804 rpi: temp=55.5 mcu_temp: temp=42.0 sd_pos=856712 sysload=0.02 cputime=267.843 memavail=1629224 print_time=6237.713 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 6227.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3477570 bytes_read=1951353 bytes_retransmit=9 bytes_invalid=0 send_seq=103133 receive_seq=103133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=56.5 mcu_temp: temp=43.0 sd_pos=857029 sysload=0.02 cputime=267.903 memavail=1629032 print_time=6238.665 buffer_time=2.209 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 6228.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3478066 bytes_read=1951749 bytes_retransmit=9 bytes_invalid=0 send_seq=103152 receive_seq=103152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.184 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=857094 sysload=0.02 cputime=267.960 memavail=1629248 print_time=6239.485 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.8 pwm=0.603
Stats 6229.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3478929 bytes_read=1952146 bytes_retransmit=9 bytes_invalid=0 send_seq=103175 receive_seq=103174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=857350 sysload=0.02 cputime=268.021 memavail=1629024 print_time=6240.952 buffer_time=2.492 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 6230.7: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000045 bytes_write=3479489 bytes_read=1952568 bytes_retransmit=9 bytes_invalid=0 send_seq=103195 receive_seq=103195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.106 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=857414 sysload=0.02 cputime=268.079 memavail=1629216 print_time=6241.574 buffer_time=2.112 print_stall=0 extruder: target=215 temp=214.8 pwm=0.505
Stats 6231.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3480335 bytes_read=1952989 bytes_retransmit=9 bytes_invalid=0 send_seq=103217 receive_seq=103216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=857606 sysload=0.02 cputime=268.139 memavail=1628712 print_time=6242.661 buffer_time=2.197 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 6232.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3481139 bytes_read=1953391 bytes_retransmit=9 bytes_invalid=0 send_seq=103240 receive_seq=103239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=857766 sysload=0.02 cputime=268.199 memavail=1628872 print_time=6243.549 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.399
Stats 6233.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3482222 bytes_read=1953853 bytes_retransmit=9 bytes_invalid=0 send_seq=103268 receive_seq=103268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=858054 sysload=0.02 cputime=268.262 memavail=1628656 print_time=6244.567 buffer_time=2.101 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 6234.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3483076 bytes_read=1954264 bytes_retransmit=9 bytes_invalid=0 send_seq=103290 receive_seq=103290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=858246 sysload=0.02 cputime=268.320 memavail=1628680 print_time=6245.477 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 6235.7: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000046 bytes_write=3483906 bytes_read=1954661 bytes_retransmit=9 bytes_invalid=0 send_seq=103312 receive_seq=103312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.172 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=858504 sysload=0.02 cputime=268.384 memavail=1628596 print_time=6246.924 buffer_time=2.455 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 6236.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3485544 bytes_read=1955192 bytes_retransmit=9 bytes_invalid=0 send_seq=103349 receive_seq=103349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=22 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.701 rpi: temp=56.5 mcu_temp: temp=42.3 sd_pos=859826 sysload=0.02 cputime=268.462 memavail=1628344 print_time=6248.085 buffer_time=2.616 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 6237.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3487370 bytes_read=1955664 bytes_retransmit=9 bytes_invalid=0 send_seq=103386 receive_seq=103386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=861307 sysload=0.01 cputime=268.540 memavail=1628596 print_time=6248.780 buffer_time=2.310 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 6238.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3488435 bytes_read=1956076 bytes_retransmit=9 bytes_invalid=0 send_seq=103411 receive_seq=103411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=54.9 pwm=0.684 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=861503 sysload=0.01 cputime=268.602 memavail=1628788 print_time=6250.032 buffer_time=2.559 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 6239.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3489046 bytes_read=1956502 bytes_retransmit=9 bytes_invalid=0 send_seq=103431 receive_seq=103430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=56.0 mcu_temp: temp=42.0 sd_pos=861568 sysload=0.01 cputime=268.661 memavail=1628540 print_time=6250.636 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6240.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000053 bytes_write=3489971 bytes_read=1956909 bytes_retransmit=9 bytes_invalid=0 send_seq=103454 receive_seq=103454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=861700 sysload=0.01 cputime=268.721 memavail=1628528 print_time=6251.826 buffer_time=2.349 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 6241.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3490949 bytes_read=1957341 bytes_retransmit=9 bytes_invalid=0 send_seq=103477 receive_seq=103477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996375 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=56.5 mcu_temp: temp=42.2 sd_pos=861861 sysload=0.01 cputime=268.783 memavail=1628736 print_time=6252.941 buffer_time=2.458 print_stall=0 extruder: target=215 temp=215.2 pwm=0.374
Stats 6242.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3491511 bytes_read=1957757 bytes_retransmit=9 bytes_invalid=0 send_seq=103497 receive_seq=103497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=55.0 mcu_temp: temp=42.0 sd_pos=861992 sysload=0.01 cputime=268.839 memavail=1629048 print_time=6253.485 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 6243.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3492429 bytes_read=1958164 bytes_retransmit=9 bytes_invalid=0 send_seq=103521 receive_seq=103521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=862123 sysload=0.01 cputime=268.900 memavail=1629116 print_time=6254.550 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 6244.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3493997 bytes_read=1958636 bytes_retransmit=9 bytes_invalid=0 send_seq=103555 receive_seq=103555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=862390 sysload=0.01 cputime=268.965 memavail=1629840 print_time=6255.986 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 6245.7: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3494859 bytes_read=1959067 bytes_retransmit=9 bytes_invalid=0 send_seq=103578 receive_seq=103578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=862587 sysload=0.01 cputime=269.025 memavail=1629868 print_time=6256.883 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 6246.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3495793 bytes_read=1959484 bytes_retransmit=9 bytes_invalid=0 send_seq=103601 receive_seq=103601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=862750 sysload=0.01 cputime=269.085 memavail=1629928 print_time=6257.779 buffer_time=2.282 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6247.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3496818 bytes_read=1959916 bytes_retransmit=9 bytes_invalid=0 send_seq=103627 receive_seq=103627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=56.5 mcu_temp: temp=42.0 sd_pos=862880 sysload=0.01 cputime=269.144 memavail=1629932 print_time=6258.724 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6248.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3497815 bytes_read=1960352 bytes_retransmit=9 bytes_invalid=0 send_seq=103652 receive_seq=103651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.021 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=863110 sysload=0.01 cputime=269.205 memavail=1629456 print_time=6259.639 buffer_time=2.137 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 6249.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3498936 bytes_read=1960774 bytes_retransmit=9 bytes_invalid=0 send_seq=103678 receive_seq=103678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=56.0 mcu_temp: temp=42.4 sd_pos=863369 sysload=0.01 cputime=269.266 memavail=1629144 print_time=6260.872 buffer_time=2.367 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 6250.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3499928 bytes_read=1961216 bytes_retransmit=9 bytes_invalid=0 send_seq=103703 receive_seq=103703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=863665 sysload=0.01 cputime=269.328 memavail=1629456 print_time=6261.638 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 6251.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3501226 bytes_read=1961682 bytes_retransmit=9 bytes_invalid=0 send_seq=103733 receive_seq=103733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=863993 sysload=0.01 cputime=269.392 memavail=1629204 print_time=6262.741 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 6252.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3502542 bytes_read=1962119 bytes_retransmit=9 bytes_invalid=0 send_seq=103763 receive_seq=103763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=56.0 mcu_temp: temp=42.3 sd_pos=864254 sysload=0.01 cputime=269.451 memavail=1629456 print_time=6263.831 buffer_time=2.318 print_stall=0 extruder: target=215 temp=214.8 pwm=0.471
Stats 6253.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3503498 bytes_read=1962554 bytes_retransmit=9 bytes_invalid=0 send_seq=103787 receive_seq=103787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.071 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=864481 sysload=0.01 cputime=269.514 memavail=1629144 print_time=6264.610 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.444
Stats 6254.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3504755 bytes_read=1962994 bytes_retransmit=9 bytes_invalid=0 send_seq=103817 receive_seq=103817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.5 mcu_temp: temp=42.4 sd_pos=864772 sysload=0.01 cputime=269.558 memavail=1629084 print_time=6265.588 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 6255.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=3506672 bytes_read=1963476 bytes_retransmit=9 bytes_invalid=0 send_seq=103858 receive_seq=103858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=865196 sysload=0.01 cputime=269.624 memavail=1629400 print_time=6266.716 buffer_time=2.194 print_stall=0 extruder: target=215 temp=214.8 pwm=0.507
Stats 6256.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=3509439 bytes_read=1964066 bytes_retransmit=9 bytes_invalid=0 send_seq=103912 receive_seq=103912 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.022 rpi: temp=55.5 mcu_temp: temp=42.2 sd_pos=866267 sysload=0.01 cputime=269.696 memavail=1628900 print_time=6267.715 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.8 pwm=0.507
Stats 6257.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=3510843 bytes_read=1964527 bytes_retransmit=9 bytes_invalid=0 send_seq=103945 receive_seq=103945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.064 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=866651 sysload=0.01 cputime=269.761 memavail=1629132 print_time=6268.705 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 6258.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=3511524 bytes_read=1964914 bytes_retransmit=9 bytes_invalid=0 send_seq=103965 receive_seq=103965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=54.5 mcu_temp: temp=42.5 sd_pos=866930 sysload=0.01 cputime=269.821 memavail=1629464 print_time=6269.804 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.0 pwm=0.375
Stats 6259.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=3512113 bytes_read=1965331 bytes_retransmit=9 bytes_invalid=0 send_seq=103985 receive_seq=103985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=867116 sysload=0.01 cputime=269.881 memavail=1629212 print_time=6270.536 buffer_time=2.002 print_stall=0 extruder: target=215 temp=214.9 pwm=0.439
Stats 6260.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000048 bytes_write=3512850 bytes_read=1965752 bytes_retransmit=9 bytes_invalid=0 send_seq=104009 receive_seq=104009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=867400 sysload=0.01 cputime=269.944 memavail=1629404 print_time=6271.634 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 6261.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3513773 bytes_read=1966174 bytes_retransmit=9 bytes_invalid=0 send_seq=104033 receive_seq=104033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=867714 sysload=0.01 cputime=270.008 memavail=1629212 print_time=6272.656 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 6262.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3514408 bytes_read=1966586 bytes_retransmit=9 bytes_invalid=0 send_seq=104052 receive_seq=104052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=867964 sysload=0.01 cputime=270.070 memavail=1629524 print_time=6273.660 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 6263.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3515031 bytes_read=1966977 bytes_retransmit=9 bytes_invalid=0 send_seq=104070 receive_seq=104070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=54.9 pwm=0.292 rpi: temp=55.0 mcu_temp: temp=42.2 sd_pos=868220 sysload=0.01 cputime=270.132 memavail=1628964 print_time=6274.664 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.1 pwm=0.369
Stats 6264.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3515735 bytes_read=1967364 bytes_retransmit=9 bytes_invalid=0 send_seq=104090 receive_seq=104090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=868475 sysload=0.01 cputime=270.196 memavail=1628980 print_time=6275.667 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 6265.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3516364 bytes_read=1967776 bytes_retransmit=9 bytes_invalid=0 send_seq=104109 receive_seq=104109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.559 rpi: temp=55.5 mcu_temp: temp=41.9 sd_pos=868727 sysload=0.01 cputime=270.259 memavail=1629228 print_time=6276.671 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 6266.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3517220 bytes_read=1968217 bytes_retransmit=9 bytes_invalid=0 send_seq=104134 receive_seq=104134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=56.0 mcu_temp: temp=42.2 sd_pos=869018 sysload=0.01 cputime=270.322 memavail=1629220 print_time=6277.625 buffer_time=2.067 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 6267.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3517808 bytes_read=1968594 bytes_retransmit=9 bytes_invalid=0 send_seq=104152 receive_seq=104152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=54.9 pwm=0.298 rpi: temp=55.0 mcu_temp: temp=42.5 sd_pos=869207 sysload=0.01 cputime=270.385 memavail=1629228 print_time=6278.655 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 6268.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3518367 bytes_read=1969011 bytes_retransmit=9 bytes_invalid=0 send_seq=104172 receive_seq=104172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=54.8 pwm=0.400 rpi: temp=55.0 mcu_temp: temp=41.9 sd_pos=869400 sysload=0.01 cputime=270.446 memavail=1628964 print_time=6279.685 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.1 pwm=0.390
Stats 6269.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3518953 bytes_read=1969407 bytes_retransmit=9 bytes_invalid=0 send_seq=104191 receive_seq=104191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.249 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=869592 sysload=0.01 cputime=270.506 memavail=1628972 print_time=6280.715 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.1 pwm=0.518
Stats 6270.8: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000055 bytes_write=3519570 bytes_read=1969784 bytes_retransmit=9 bytes_invalid=0 send_seq=104209 receive_seq=104209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.057 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=869787 sysload=0.01 cputime=270.564 memavail=1628732 print_time=6281.746 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.3 pwm=0.304
Stats 6271.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3520075 bytes_read=1970215 bytes_retransmit=9 bytes_invalid=0 send_seq=104226 receive_seq=104226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=869977 sysload=0.01 cputime=270.624 memavail=1628480 print_time=6282.776 buffer_time=2.206 print_stall=0 extruder: target=215 temp=214.9 pwm=0.648
Stats 6272.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3521041 bytes_read=1970627 bytes_retransmit=9 bytes_invalid=0 send_seq=104251 receive_seq=104251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=54.9 pwm=0.735 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=870268 sysload=0.01 cputime=270.684 memavail=1628792 print_time=6284.176 buffer_time=2.603 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 6273.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3521486 bytes_read=1971004 bytes_retransmit=9 bytes_invalid=0 send_seq=104269 receive_seq=104269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.3 sd_pos=870364 sysload=0.01 cputime=270.740 memavail=1628288 print_time=6284.957 buffer_time=2.380 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 6274.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3521948 bytes_read=1971415 bytes_retransmit=9 bytes_invalid=0 send_seq=104285 receive_seq=104285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.7 sd_pos=870460 sysload=0.01 cputime=270.797 memavail=1628792 print_time=6285.703 buffer_time=2.124 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 6275.8: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000020 mcu_task_stddev=0.000054 bytes_write=3522591 bytes_read=1971802 bytes_retransmit=9 bytes_invalid=0 send_seq=104305 receive_seq=104305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.8 pwm=0.514 rpi: temp=55.5 mcu_temp: temp=42.6 sd_pos=870651 sysload=0.01 cputime=270.856 memavail=1628796 print_time=6287.100 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6276.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3523052 bytes_read=1972214 bytes_retransmit=9 bytes_invalid=0 send_seq=104324 receive_seq=104324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.8 pwm=0.615 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=870810 sysload=0.01 cputime=270.918 memavail=1628796 print_time=6287.835 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.8 pwm=0.572
Stats 6277.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3523664 bytes_read=1972625 bytes_retransmit=9 bytes_invalid=0 send_seq=104343 receive_seq=104343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=871032 sysload=0.01 cputime=270.977 memavail=1628796 print_time=6289.277 buffer_time=2.687 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 6278.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3525405 bytes_read=1973128 bytes_retransmit=9 bytes_invalid=0 send_seq=104384 receive_seq=104384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.8 pwm=0.730 rpi: temp=56.5 mcu_temp: temp=42.6 sd_pos=871830 sysload=0.01 cputime=271.046 memavail=1629012 print_time=6290.378 buffer_time=2.785 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 6279.8: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3526560 bytes_read=1973575 bytes_retransmit=9 bytes_invalid=0 send_seq=104413 receive_seq=104413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=42.1 sd_pos=872032 sysload=0.01 cputime=271.107 memavail=1628804 print_time=6292.015 buffer_time=3.419 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 6280.9: gcodein=0 mcu: mcu_awake=0.011 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3526809 bytes_read=1973966 bytes_retransmit=9 bytes_invalid=0 send_seq=104428 receive_seq=104428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.200 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=872032 sysload=0.01 cputime=271.163 memavail=1629004 print_time=6292.015 buffer_time=2.416 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 6281.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3527326 bytes_read=1974363 bytes_retransmit=9 bytes_invalid=0 send_seq=104447 receive_seq=104447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=872126 sysload=0.01 cputime=271.223 memavail=1628692 print_time=6293.558 buffer_time=2.955 print_stall=0 extruder: target=215 temp=215.2 pwm=0.355
Stats 6282.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3527783 bytes_read=1974750 bytes_retransmit=9 bytes_invalid=0 send_seq=104464 receive_seq=104464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=872256 sysload=0.00 cputime=271.281 memavail=1628692 print_time=6295.101 buffer_time=3.495 print_stall=0 extruder: target=215 temp=215.1 pwm=0.536
Stats 6283.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3528049 bytes_read=1975136 bytes_retransmit=9 bytes_invalid=0 send_seq=104478 receive_seq=104478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.8 pwm=0.651 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=872256 sysload=0.00 cputime=271.336 memavail=1628944 print_time=6295.101 buffer_time=2.492 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 6284.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3528651 bytes_read=1975523 bytes_retransmit=9 bytes_invalid=0 send_seq=104498 receive_seq=104498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.297 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=872444 sysload=0.00 cputime=271.396 memavail=1628656 print_time=6296.705 buffer_time=3.095 print_stall=0 extruder: target=215 temp=215.3 pwm=0.328
Stats 6285.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3528858 bytes_read=1975905 bytes_retransmit=9 bytes_invalid=0 send_seq=104511 receive_seq=104511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=872444 sysload=0.00 cputime=271.452 memavail=1628636 print_time=6296.705 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.4 pwm=0.369
Stats 6286.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000019 mcu_task_stddev=0.000041 bytes_write=3529358 bytes_read=1976296 bytes_retransmit=9 bytes_invalid=0 send_seq=104529 receive_seq=104529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=872541 sysload=0.00 cputime=271.502 memavail=1628388 print_time=6298.331 buffer_time=2.721 print_stall=0 extruder: target=215 temp=215.3 pwm=0.421
Stats 6287.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3529866 bytes_read=1976693 bytes_retransmit=9 bytes_invalid=0 send_seq=104548 receive_seq=104548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=54.5 mcu_temp: temp=42.5 sd_pos=872666 sysload=0.08 cputime=271.566 memavail=1628644 print_time=6300.053 buffer_time=3.439 print_stall=0 extruder: target=215 temp=215.3 pwm=0.372
Stats 6288.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3530113 bytes_read=1977080 bytes_retransmit=9 bytes_invalid=0 send_seq=104562 receive_seq=104562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=872666 sysload=0.08 cputime=271.620 memavail=1628616 print_time=6300.053 buffer_time=2.437 print_stall=0 extruder: target=215 temp=215.1 pwm=0.566
Stats 6289.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3530676 bytes_read=1977476 bytes_retransmit=9 bytes_invalid=0 send_seq=104581 receive_seq=104581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=872796 sysload=0.08 cputime=271.660 memavail=1628644 print_time=6301.757 buffer_time=3.139 print_stall=0 extruder: target=215 temp=215.4 pwm=0.359
Stats 6290.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3530896 bytes_read=1977828 bytes_retransmit=9 bytes_invalid=0 send_seq=104594 receive_seq=104594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=872796 sysload=0.08 cputime=271.711 memavail=1628132 print_time=6301.757 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.6 pwm=0.243
Stats 6291.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000043 bytes_write=3531446 bytes_read=1978230 bytes_retransmit=9 bytes_invalid=0 send_seq=104612 receive_seq=104611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.505 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=872923 sysload=0.08 cputime=271.768 memavail=1628352 print_time=6303.493 buffer_time=2.869 print_stall=0 extruder: target=215 temp=215.3 pwm=0.389
Stats 6292.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3532008 bytes_read=1978651 bytes_retransmit=9 bytes_invalid=0 send_seq=104632 receive_seq=104632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.053 rpi: temp=56.0 mcu_temp: temp=42.1 sd_pos=873054 sysload=0.16 cputime=271.828 memavail=1628016 print_time=6305.235 buffer_time=3.608 print_stall=0 extruder: target=215 temp=215.1 pwm=0.522
Stats 6293.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3532285 bytes_read=1979013 bytes_retransmit=9 bytes_invalid=0 send_seq=104647 receive_seq=104647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=873054 sysload=0.16 cputime=271.887 memavail=1628000 print_time=6305.235 buffer_time=2.605 print_stall=0 extruder: target=215 temp=215.2 pwm=0.420
Stats 6294.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3532817 bytes_read=1979425 bytes_retransmit=9 bytes_invalid=0 send_seq=104666 receive_seq=104666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.502 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=873118 sysload=0.16 cputime=271.946 memavail=1628528 print_time=6307.811 buffer_time=4.179 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 6295.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3533081 bytes_read=1979796 bytes_retransmit=9 bytes_invalid=0 send_seq=104680 receive_seq=104680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.493 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=873118 sysload=0.16 cputime=271.991 memavail=1628440 print_time=6307.811 buffer_time=3.179 print_stall=0 extruder: target=215 temp=215.3 pwm=0.292
Stats 6296.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3533313 bytes_read=1980158 bytes_retransmit=9 bytes_invalid=0 send_seq=104695 receive_seq=104695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.329 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=873118 sysload=0.16 cputime=272.048 memavail=1628292 print_time=6307.811 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 6297.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3533964 bytes_read=1980585 bytes_retransmit=9 bytes_invalid=0 send_seq=104714 receive_seq=104714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=873248 sysload=0.15 cputime=272.107 memavail=1628292 print_time=6310.534 buffer_time=3.899 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 6298.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3534203 bytes_read=1980961 bytes_retransmit=9 bytes_invalid=0 send_seq=104729 receive_seq=104729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=43.0 sd_pos=873248 sysload=0.15 cputime=272.164 memavail=1628300 print_time=6310.534 buffer_time=2.899 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 6299.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3534686 bytes_read=1981343 bytes_retransmit=9 bytes_invalid=0 send_seq=104748 receive_seq=104748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=54.5 mcu_temp: temp=42.7 sd_pos=873344 sysload=0.15 cputime=272.222 memavail=1628300 print_time=6313.098 buffer_time=4.462 print_stall=0 extruder: target=215 temp=214.8 pwm=0.562
Stats 6300.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3535014 bytes_read=1981745 bytes_retransmit=9 bytes_invalid=0 send_seq=104765 receive_seq=104765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.471 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=873344 sysload=0.15 cputime=272.280 memavail=1628300 print_time=6313.098 buffer_time=3.462 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 6301.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=3535237 bytes_read=1982116 bytes_retransmit=9 bytes_invalid=0 send_seq=104779 receive_seq=104779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=873344 sysload=0.15 cputime=272.334 memavail=1628304 print_time=6313.098 buffer_time=2.461 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 6302.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3535756 bytes_read=1982503 bytes_retransmit=9 bytes_invalid=0 send_seq=104796 receive_seq=104796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=873408 sysload=0.13 cputime=272.390 memavail=1628556 print_time=6315.558 buffer_time=3.920 print_stall=0 extruder: target=215 temp=215.2 pwm=0.264
Stats 6303.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3536015 bytes_read=1982905 bytes_retransmit=9 bytes_invalid=0 send_seq=104813 receive_seq=104813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=54.5 mcu_temp: temp=42.9 sd_pos=873408 sysload=0.13 cputime=272.447 memavail=1628052 print_time=6315.558 buffer_time=2.919 print_stall=0 extruder: target=215 temp=214.8 pwm=0.578
Stats 6304.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3536526 bytes_read=1983291 bytes_retransmit=9 bytes_invalid=0 send_seq=104830 receive_seq=104830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=873596 sysload=0.13 cputime=272.490 memavail=1628248 print_time=6318.094 buffer_time=4.455 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 6305.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3536778 bytes_read=1983648 bytes_retransmit=9 bytes_invalid=0 send_seq=104844 receive_seq=104844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.551 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=873596 sysload=0.13 cputime=272.544 memavail=1628508 print_time=6318.094 buffer_time=3.454 print_stall=0 extruder: target=215 temp=215.2 pwm=0.369
Stats 6306.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3537006 bytes_read=1984040 bytes_retransmit=9 bytes_invalid=0 send_seq=104859 receive_seq=104859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=873596 sysload=0.13 cputime=272.598 memavail=1628256 print_time=6318.094 buffer_time=2.454 print_stall=0 extruder: target=215 temp=215.0 pwm=0.557
Stats 6307.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3537538 bytes_read=1984446 bytes_retransmit=9 bytes_invalid=0 send_seq=104877 receive_seq=104877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=873662 sysload=0.12 cputime=272.660 memavail=1628256 print_time=6320.533 buffer_time=3.892 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 6308.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3537724 bytes_read=1984788 bytes_retransmit=9 bytes_invalid=0 send_seq=104888 receive_seq=104888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.5 sd_pos=873662 sysload=0.12 cputime=272.715 memavail=1628316 print_time=6320.533 buffer_time=2.891 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6309.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3538242 bytes_read=1985200 bytes_retransmit=9 bytes_invalid=0 send_seq=104907 receive_seq=104907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=873757 sysload=0.12 cputime=272.778 memavail=1628004 print_time=6323.038 buffer_time=4.396 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 6310.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3538473 bytes_read=1985566 bytes_retransmit=9 bytes_invalid=0 send_seq=104920 receive_seq=104920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.145 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=873757 sysload=0.12 cputime=272.834 memavail=1627944 print_time=6323.038 buffer_time=3.395 print_stall=0 extruder: target=215 temp=215.2 pwm=0.425
Stats 6311.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000035 bytes_write=3538695 bytes_read=1985923 bytes_retransmit=9 bytes_invalid=0 send_seq=104934 receive_seq=104934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=55.0 mcu_temp: temp=42.4 sd_pos=873757 sysload=0.12 cputime=272.887 memavail=1627756 print_time=6323.038 buffer_time=2.394 print_stall=0 extruder: target=215 temp=214.9 pwm=0.580
Stats 6312.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3539263 bytes_read=1986360 bytes_retransmit=9 bytes_invalid=0 send_seq=104955 receive_seq=104955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=54.5 mcu_temp: temp=42.6 sd_pos=873887 sysload=0.11 cputime=272.951 memavail=1627756 print_time=6325.508 buffer_time=3.863 print_stall=0 extruder: target=215 temp=215.1 pwm=0.392
Stats 6313.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3539486 bytes_read=1986724 bytes_retransmit=9 bytes_invalid=0 send_seq=104969 receive_seq=104969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.827 rpi: temp=55.0 mcu_temp: temp=42.7 sd_pos=873887 sysload=0.11 cputime=273.006 memavail=1627756 print_time=6325.508 buffer_time=2.862 print_stall=0 extruder: target=215 temp=215.2 pwm=0.379
Stats 6314.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3539944 bytes_read=1987085 bytes_retransmit=9 bytes_invalid=0 send_seq=104986 receive_seq=104986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=873949 sysload=0.11 cputime=273.048 memavail=1628324 print_time=6327.869 buffer_time=4.223 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 6315.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3540240 bytes_read=1987460 bytes_retransmit=9 bytes_invalid=0 send_seq=105000 receive_seq=105000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=873949 sysload=0.11 cputime=273.105 memavail=1628576 print_time=6327.869 buffer_time=3.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.571
Stats 6316.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3540456 bytes_read=1987810 bytes_retransmit=9 bytes_invalid=0 send_seq=105012 receive_seq=105012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.220 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=873949 sysload=0.11 cputime=273.162 memavail=1628652 print_time=6327.869 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 6317.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3541020 bytes_read=1988207 bytes_retransmit=9 bytes_invalid=0 send_seq=105031 receive_seq=105031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=874015 sysload=0.10 cputime=273.221 memavail=1628644 print_time=6330.191 buffer_time=3.543 print_stall=0 extruder: target=215 temp=215.0 pwm=0.432
Stats 6318.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3541233 bytes_read=1988594 bytes_retransmit=9 bytes_invalid=0 send_seq=105045 receive_seq=105045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=874015 sysload=0.10 cputime=273.276 memavail=1628652 print_time=6330.191 buffer_time=2.543 print_stall=0 extruder: target=215 temp=215.2 pwm=0.340
Stats 6319.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3541776 bytes_read=1988980 bytes_retransmit=9 bytes_invalid=0 send_seq=105062 receive_seq=105062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=874079 sysload=0.10 cputime=273.317 memavail=1628400 print_time=6332.463 buffer_time=3.814 print_stall=0 extruder: target=215 temp=215.4 pwm=0.211
Stats 6320.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3542003 bytes_read=1989342 bytes_retransmit=9 bytes_invalid=0 send_seq=105077 receive_seq=105077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.149 rpi: temp=54.5 mcu_temp: temp=42.8 sd_pos=874079 sysload=0.10 cputime=273.371 memavail=1628652 print_time=6332.463 buffer_time=2.813 print_stall=0 extruder: target=215 temp=215.2 pwm=0.357
Stats 6321.9: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3542591 bytes_read=1989759 bytes_retransmit=9 bytes_invalid=0 send_seq=105097 receive_seq=105097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=56.5 mcu_temp: temp=42.7 sd_pos=874308 sysload=0.10 cputime=273.435 memavail=1628676 print_time=6334.704 buffer_time=4.054 print_stall=0 extruder: target=215 temp=215.4 pwm=0.207
Stats 6322.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=3542879 bytes_read=1990150 bytes_retransmit=9 bytes_invalid=0 send_seq=105112 receive_seq=105112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=874308 sysload=0.10 cputime=273.497 memavail=1628652 print_time=6334.704 buffer_time=3.053 print_stall=0 extruder: target=215 temp=215.2 pwm=0.409
Stats 6323.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=3543088 bytes_read=1990502 bytes_retransmit=9 bytes_invalid=0 send_seq=105125 receive_seq=105125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=874308 sysload=0.10 cputime=273.553 memavail=1628896 print_time=6334.704 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 6324.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=3544057 bytes_read=1990949 bytes_retransmit=9 bytes_invalid=0 send_seq=105151 receive_seq=105151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.430 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=874577 sysload=0.10 cputime=273.621 memavail=1629148 print_time=6335.746 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 6325.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=3545006 bytes_read=1991375 bytes_retransmit=9 bytes_invalid=0 send_seq=105176 receive_seq=105176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=874740 sysload=0.10 cputime=273.684 memavail=1629156 print_time=6336.970 buffer_time=2.316 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 6326.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=3546043 bytes_read=1991807 bytes_retransmit=9 bytes_invalid=0 send_seq=105205 receive_seq=105205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.754 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=874999 sysload=0.10 cputime=273.747 memavail=1628904 print_time=6338.254 buffer_time=2.599 print_stall=0 extruder: target=215 temp=215.1 pwm=0.490
Stats 6327.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3546685 bytes_read=1992249 bytes_retransmit=9 bytes_invalid=0 send_seq=105227 receive_seq=105227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.468 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=875096 sysload=0.09 cputime=273.810 memavail=1629156 print_time=6338.881 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.1 pwm=0.374
Stats 6328.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3547641 bytes_read=1992670 bytes_retransmit=9 bytes_invalid=0 send_seq=105251 receive_seq=105251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.367 rpi: temp=54.5 mcu_temp: temp=43.1 sd_pos=875322 sysload=0.09 cputime=273.876 memavail=1628652 print_time=6340.111 buffer_time=2.454 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 6329.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3548346 bytes_read=1993062 bytes_retransmit=9 bytes_invalid=0 send_seq=105272 receive_seq=105272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.017 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=875388 sysload=0.09 cputime=273.937 memavail=1628904 print_time=6340.711 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 6330.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3549240 bytes_read=1993499 bytes_retransmit=9 bytes_invalid=0 send_seq=105296 receive_seq=105296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=875615 sysload=0.09 cputime=274.001 memavail=1628904 print_time=6341.934 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 6331.9: gcodein=0 mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000047 bytes_write=3550204 bytes_read=1993925 bytes_retransmit=9 bytes_invalid=0 send_seq=105321 receive_seq=105321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=42.6 sd_pos=875779 sysload=0.09 cputime=274.063 memavail=1628936 print_time=6343.036 buffer_time=2.377 print_stall=0 extruder: target=215 temp=214.8 pwm=0.558
Stats 6332.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3551169 bytes_read=1994372 bytes_retransmit=9 bytes_invalid=0 send_seq=105350 receive_seq=105350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=875977 sysload=0.08 cputime=274.128 memavail=1628652 print_time=6344.004 buffer_time=2.345 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 6333.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3552098 bytes_read=1994814 bytes_retransmit=9 bytes_invalid=0 send_seq=105375 receive_seq=105375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=876180 sysload=0.08 cputime=274.193 memavail=1628920 print_time=6344.782 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 6334.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3552766 bytes_read=1995225 bytes_retransmit=9 bytes_invalid=0 send_seq=105397 receive_seq=105397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.8 pwm=1.000 rpi: temp=56.5 mcu_temp: temp=43.2 sd_pos=876443 sysload=0.08 cputime=274.238 memavail=1628912 print_time=6346.150 buffer_time=2.490 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 6335.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3553260 bytes_read=1995597 bytes_retransmit=9 bytes_invalid=0 send_seq=105414 receive_seq=105414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=876541 sysload=0.08 cputime=274.296 memavail=1629164 print_time=6346.739 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 6336.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=3554015 bytes_read=1996024 bytes_retransmit=9 bytes_invalid=0 send_seq=105436 receive_seq=105436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=876771 sysload=0.08 cputime=274.358 memavail=1629164 print_time=6348.317 buffer_time=2.655 print_stall=0 extruder: target=215 temp=215.0 pwm=0.397
Stats 6337.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3554488 bytes_read=1996451 bytes_retransmit=9 bytes_invalid=0 send_seq=105456 receive_seq=105456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=876869 sysload=0.07 cputime=274.419 memavail=1628660 print_time=6349.291 buffer_time=2.628 print_stall=0 extruder: target=215 temp=214.9 pwm=0.448
Stats 6338.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3554955 bytes_read=1996833 bytes_retransmit=9 bytes_invalid=0 send_seq=105475 receive_seq=105475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=876999 sysload=0.07 cputime=274.479 memavail=1628664 print_time=6350.335 buffer_time=2.671 print_stall=0 extruder: target=215 temp=214.7 pwm=0.545
Stats 6339.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3555415 bytes_read=1997245 bytes_retransmit=9 bytes_invalid=0 send_seq=105494 receive_seq=105494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=877098 sysload=0.07 cputime=274.538 memavail=1628632 print_time=6351.319 buffer_time=2.653 print_stall=0 extruder: target=215 temp=214.9 pwm=0.409
Stats 6340.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3555872 bytes_read=1997636 bytes_retransmit=9 bytes_invalid=0 send_seq=105512 receive_seq=105512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.224 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=877225 sysload=0.07 cputime=274.596 memavail=1628664 print_time=6352.463 buffer_time=2.796 print_stall=0 extruder: target=215 temp=214.8 pwm=0.489
Stats 6341.9: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3556408 bytes_read=1998023 bytes_retransmit=9 bytes_invalid=0 send_seq=105532 receive_seq=105532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=877356 sysload=0.07 cputime=274.656 memavail=1628664 print_time=6353.697 buffer_time=3.030 print_stall=0 extruder: target=215 temp=215.1 pwm=0.382
Stats 6342.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3556690 bytes_read=1998440 bytes_retransmit=9 bytes_invalid=0 send_seq=105549 receive_seq=105549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=877356 sysload=0.07 cputime=274.715 memavail=1628420 print_time=6353.697 buffer_time=2.030 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 6343.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3557176 bytes_read=1998831 bytes_retransmit=9 bytes_invalid=0 send_seq=105567 receive_seq=105567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.054 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=877420 sysload=0.07 cputime=274.774 memavail=1628412 print_time=6355.014 buffer_time=2.346 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 6344.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3557655 bytes_read=1999208 bytes_retransmit=9 bytes_invalid=0 send_seq=105585 receive_seq=105585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=877518 sysload=0.07 cputime=274.815 memavail=1628692 print_time=6356.501 buffer_time=2.832 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 6345.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3558109 bytes_read=1999629 bytes_retransmit=9 bytes_invalid=0 send_seq=105603 receive_seq=105603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996363 heater_bed: target=55 temp=55.2 pwm=0.089 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=877581 sysload=0.07 cputime=274.875 memavail=1628424 print_time=6357.989 buffer_time=3.320 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 6346.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000037 bytes_write=3558384 bytes_read=1999991 bytes_retransmit=9 bytes_invalid=0 send_seq=105618 receive_seq=105618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.603 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=877581 sysload=0.07 cputime=274.929 memavail=1628928 print_time=6357.989 buffer_time=2.319 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 6347.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3558865 bytes_read=2000378 bytes_retransmit=9 bytes_invalid=0 send_seq=105635 receive_seq=105635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.2 pwm=0.021 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=877679 sysload=0.06 cputime=274.988 memavail=1628364 print_time=6359.580 buffer_time=2.910 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6348.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3559353 bytes_read=2000804 bytes_retransmit=9 bytes_invalid=0 send_seq=105654 receive_seq=105654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=877743 sysload=0.06 cputime=275.049 memavail=1628624 print_time=6361.185 buffer_time=3.514 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 6349.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3559659 bytes_read=2001171 bytes_retransmit=9 bytes_invalid=0 send_seq=105670 receive_seq=105670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=55.0 mcu_temp: temp=42.6 sd_pos=877743 sysload=0.06 cputime=275.104 memavail=1628876 print_time=6361.185 buffer_time=2.514 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 6350.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3560151 bytes_read=2001548 bytes_retransmit=9 bytes_invalid=0 send_seq=105688 receive_seq=105688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.7 sd_pos=877849 sysload=0.06 cputime=275.162 memavail=1629188 print_time=6362.868 buffer_time=3.196 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 6351.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000041 bytes_write=3560359 bytes_read=2001944 bytes_retransmit=9 bytes_invalid=0 send_seq=105701 receive_seq=105701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.239 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=877849 sysload=0.06 cputime=275.218 memavail=1629440 print_time=6362.868 buffer_time=2.195 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 6352.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3561250 bytes_read=2002376 bytes_retransmit=9 bytes_invalid=0 send_seq=105727 receive_seq=105727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.370 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=878075 sysload=0.06 cputime=275.281 memavail=1629440 print_time=6363.865 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 6353.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3562173 bytes_read=2002793 bytes_retransmit=9 bytes_invalid=0 send_seq=105753 receive_seq=105753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.547 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=878272 sysload=0.06 cputime=275.343 memavail=1629696 print_time=6364.703 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 6354.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3563375 bytes_read=2003269 bytes_retransmit=9 bytes_invalid=0 send_seq=105782 receive_seq=105782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.028 rpi: temp=55.0 mcu_temp: temp=43.0 sd_pos=878535 sysload=0.06 cputime=275.411 memavail=1629448 print_time=6365.919 buffer_time=2.244 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 6355.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3564326 bytes_read=2003686 bytes_retransmit=9 bytes_invalid=0 send_seq=105808 receive_seq=105808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=878667 sysload=0.06 cputime=275.471 memavail=1629448 print_time=6366.692 buffer_time=2.016 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 6356.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000040 bytes_write=3566186 bytes_read=2004178 bytes_retransmit=9 bytes_invalid=0 send_seq=105849 receive_seq=105849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=54.5 mcu_temp: temp=43.1 sd_pos=879122 sysload=0.06 cputime=275.539 memavail=1629452 print_time=6368.075 buffer_time=2.398 print_stall=0 extruder: target=215 temp=215.1 pwm=0.348
Stats 6357.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3567584 bytes_read=2004689 bytes_retransmit=9 bytes_invalid=0 send_seq=105882 receive_seq=105882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=54.5 mcu_temp: temp=43.1 sd_pos=879385 sysload=0.05 cputime=275.605 memavail=1629452 print_time=6368.842 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 6358.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3569102 bytes_read=2005161 bytes_retransmit=9 bytes_invalid=0 send_seq=105919 receive_seq=105919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=879776 sysload=0.05 cputime=275.670 memavail=1629424 print_time=6369.876 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 6359.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3571179 bytes_read=2005673 bytes_retransmit=9 bytes_invalid=0 send_seq=105961 receive_seq=105961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.217 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=880361 sysload=0.05 cputime=275.737 memavail=1629708 print_time=6370.733 buffer_time=2.054 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6360.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3572885 bytes_read=2006184 bytes_retransmit=9 bytes_invalid=0 send_seq=106000 receive_seq=106000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.152 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=880762 sysload=0.05 cputime=275.812 memavail=1629708 print_time=6372.016 buffer_time=2.336 print_stall=0 extruder: target=215 temp=215.1 pwm=0.398
Stats 6361.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3573852 bytes_read=2006601 bytes_retransmit=9 bytes_invalid=0 send_seq=106026 receive_seq=106026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.120 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=880983 sysload=0.05 cputime=275.875 memavail=1629440 print_time=6373.075 buffer_time=2.394 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 6362.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=3574765 bytes_read=2007048 bytes_retransmit=9 bytes_invalid=0 send_seq=106052 receive_seq=106052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.189 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=881206 sysload=0.05 cputime=275.941 memavail=1629456 print_time=6374.169 buffer_time=2.487 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 6363.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=3575507 bytes_read=2007479 bytes_retransmit=9 bytes_invalid=0 send_seq=106075 receive_seq=106075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=881270 sysload=0.05 cputime=275.998 memavail=1629456 print_time=6374.735 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 6364.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=3576489 bytes_read=2007906 bytes_retransmit=9 bytes_invalid=0 send_seq=106103 receive_seq=106103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.495 rpi: temp=56.0 mcu_temp: temp=42.9 sd_pos=881464 sysload=0.05 cputime=276.047 memavail=1629144 print_time=6375.935 buffer_time=2.253 print_stall=0 extruder: target=215 temp=214.8 pwm=0.528
Stats 6365.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=3577504 bytes_read=2008343 bytes_retransmit=9 bytes_invalid=0 send_seq=106130 receive_seq=106130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=881662 sysload=0.05 cputime=276.106 memavail=1629404 print_time=6376.714 buffer_time=2.030 print_stall=0 extruder: target=215 temp=215.0 pwm=0.399
Stats 6366.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=3578359 bytes_read=2008779 bytes_retransmit=9 bytes_invalid=0 send_seq=106154 receive_seq=106154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=882074 sysload=0.05 cputime=276.176 memavail=1629404 print_time=6378.194 buffer_time=2.510 print_stall=0 extruder: target=215 temp=214.9 pwm=0.426
Stats 6367.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3578821 bytes_read=2009166 bytes_retransmit=9 bytes_invalid=0 send_seq=106171 receive_seq=106171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=56.5 mcu_temp: temp=43.3 sd_pos=882169 sysload=0.04 cputime=276.237 memavail=1629152 print_time=6378.890 buffer_time=2.204 print_stall=0 extruder: target=215 temp=214.8 pwm=0.520
Stats 6368.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3579268 bytes_read=2009548 bytes_retransmit=9 bytes_invalid=0 send_seq=106187 receive_seq=106187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.386 rpi: temp=55.0 mcu_temp: temp=43.0 sd_pos=882293 sysload=0.04 cputime=276.294 memavail=1629152 print_time=6379.766 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.360
Stats 6369.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3579894 bytes_read=2009964 bytes_retransmit=9 bytes_invalid=0 send_seq=106207 receive_seq=106207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=882483 sysload=0.04 cputime=276.359 memavail=1629144 print_time=6381.713 buffer_time=3.026 print_stall=0 extruder: target=215 temp=215.1 pwm=0.353
Stats 6370.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3580175 bytes_read=2010321 bytes_retransmit=9 bytes_invalid=0 send_seq=106221 receive_seq=106221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=882483 sysload=0.04 cputime=276.411 memavail=1629160 print_time=6381.713 buffer_time=2.026 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 6371.9: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3580670 bytes_read=2010708 bytes_retransmit=9 bytes_invalid=0 send_seq=106238 receive_seq=106238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=882611 sysload=0.04 cputime=276.470 memavail=1629160 print_time=6382.799 buffer_time=2.111 print_stall=0 extruder: target=215 temp=215.0 pwm=0.518
Stats 6372.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3581194 bytes_read=2011126 bytes_retransmit=9 bytes_invalid=0 send_seq=106256 receive_seq=106256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.092 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=882738 sysload=0.04 cputime=276.527 memavail=1629172 print_time=6383.928 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 6373.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3581699 bytes_read=2011492 bytes_retransmit=9 bytes_invalid=0 send_seq=106274 receive_seq=106274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=882804 sysload=0.04 cputime=276.580 memavail=1629112 print_time=6385.113 buffer_time=2.424 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 6374.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3582171 bytes_read=2011858 bytes_retransmit=9 bytes_invalid=0 send_seq=106289 receive_seq=106289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.445 rpi: temp=55.0 mcu_temp: temp=43.7 sd_pos=882930 sysload=0.04 cputime=276.637 memavail=1629364 print_time=6386.435 buffer_time=2.745 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6375.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3582626 bytes_read=2012242 bytes_retransmit=9 bytes_invalid=0 send_seq=106305 receive_seq=106305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=882996 sysload=0.04 cputime=276.695 memavail=1629416 print_time=6387.729 buffer_time=3.039 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 6376.9: gcodein=0 mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000048 bytes_write=3582869 bytes_read=2012592 bytes_retransmit=9 bytes_invalid=0 send_seq=106319 receive_seq=106319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.057 rpi: temp=54.5 mcu_temp: temp=43.3 sd_pos=882996 sysload=0.04 cputime=276.750 memavail=1629172 print_time=6387.729 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 6377.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3583380 bytes_read=2012999 bytes_retransmit=9 bytes_invalid=0 send_seq=106337 receive_seq=106337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=883124 sysload=0.04 cputime=276.811 memavail=1628864 print_time=6389.657 buffer_time=2.965 print_stall=0 extruder: target=215 temp=215.2 pwm=0.320
Stats 6378.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3583848 bytes_read=2013395 bytes_retransmit=9 bytes_invalid=0 send_seq=106353 receive_seq=106353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.008 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=883190 sysload=0.04 cputime=276.869 memavail=1628612 print_time=6391.664 buffer_time=3.972 print_stall=0 extruder: target=215 temp=215.0 pwm=0.458
Stats 6379.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3584105 bytes_read=2013747 bytes_retransmit=9 bytes_invalid=0 send_seq=106366 receive_seq=106366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=55.0 mcu_temp: temp=42.8 sd_pos=883190 sysload=0.04 cputime=276.923 memavail=1628864 print_time=6391.664 buffer_time=2.971 print_stall=0 extruder: target=215 temp=215.2 pwm=0.333
Stats 6380.9: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3584565 bytes_read=2014134 bytes_retransmit=9 bytes_invalid=0 send_seq=106383 receive_seq=106383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=883285 sysload=0.04 cputime=276.982 memavail=1628936 print_time=6393.787 buffer_time=4.093 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 6382.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000017 mcu_task_stddev=0.000046 bytes_write=3584865 bytes_read=2014510 bytes_retransmit=9 bytes_invalid=0 send_seq=106395 receive_seq=106395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=883285 sysload=0.04 cputime=277.036 memavail=1628624 print_time=6393.787 buffer_time=3.092 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 6383.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3585053 bytes_read=2014867 bytes_retransmit=9 bytes_invalid=0 send_seq=106406 receive_seq=106406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=883285 sysload=0.03 cputime=277.088 memavail=1628624 print_time=6393.787 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6384.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3585573 bytes_read=2015259 bytes_retransmit=9 bytes_invalid=0 send_seq=106424 receive_seq=106424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=55.5 mcu_temp: temp=43.0 sd_pos=883350 sysload=0.03 cputime=277.146 memavail=1628620 print_time=6395.890 buffer_time=3.194 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 6385.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3585820 bytes_read=2015645 bytes_retransmit=9 bytes_invalid=0 send_seq=106438 receive_seq=106438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.519 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=883350 sysload=0.03 cputime=277.187 memavail=1628632 print_time=6395.890 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 6386.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3586392 bytes_read=2016022 bytes_retransmit=9 bytes_invalid=0 send_seq=106456 receive_seq=106456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=883446 sysload=0.03 cputime=277.246 memavail=1628628 print_time=6398.143 buffer_time=3.446 print_stall=0 extruder: target=215 temp=215.2 pwm=0.353
Stats 6387.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3586623 bytes_read=2016389 bytes_retransmit=9 bytes_invalid=0 send_seq=106469 receive_seq=106469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=883446 sysload=0.03 cputime=277.299 memavail=1628624 print_time=6398.143 buffer_time=2.445 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 6388.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3587186 bytes_read=2016810 bytes_retransmit=9 bytes_invalid=0 send_seq=106487 receive_seq=106487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=883577 sysload=0.03 cputime=277.359 memavail=1628628 print_time=6400.444 buffer_time=3.746 print_stall=0 extruder: target=215 temp=214.9 pwm=0.609
Stats 6389.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3587422 bytes_read=2017167 bytes_retransmit=9 bytes_invalid=0 send_seq=106501 receive_seq=106501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=54.0 mcu_temp: temp=43.1 sd_pos=883577 sysload=0.03 cputime=277.412 memavail=1628884 print_time=6400.444 buffer_time=2.745 print_stall=0 extruder: target=215 temp=215.2 pwm=0.336
Stats 6390.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3587911 bytes_read=2017554 bytes_retransmit=9 bytes_invalid=0 send_seq=106518 receive_seq=106518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.025 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=883704 sysload=0.03 cputime=277.468 memavail=1629144 print_time=6402.765 buffer_time=4.065 print_stall=0 extruder: target=215 temp=215.1 pwm=0.481
Stats 6391.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3588178 bytes_read=2017940 bytes_retransmit=9 bytes_invalid=0 send_seq=106532 receive_seq=106532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.080 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=883704 sysload=0.03 cputime=277.521 memavail=1628636 print_time=6402.765 buffer_time=3.065 print_stall=0 extruder: target=215 temp=215.0 pwm=0.567
Stats 6392.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000039 bytes_write=3588402 bytes_read=2018297 bytes_retransmit=9 bytes_invalid=0 send_seq=106546 receive_seq=106546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=883704 sysload=0.03 cputime=277.572 memavail=1628636 print_time=6402.765 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 6393.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3588947 bytes_read=2018699 bytes_retransmit=9 bytes_invalid=0 send_seq=106563 receive_seq=106563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=883802 sysload=0.03 cputime=277.629 memavail=1628888 print_time=6405.149 buffer_time=3.448 print_stall=0 extruder: target=215 temp=215.1 pwm=0.411
Stats 6394.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3589172 bytes_read=2019085 bytes_retransmit=9 bytes_invalid=0 send_seq=106577 receive_seq=106577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=883802 sysload=0.03 cputime=277.681 memavail=1628888 print_time=6405.149 buffer_time=2.448 print_stall=0 extruder: target=215 temp=215.2 pwm=0.348
Stats 6395.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3589766 bytes_read=2019467 bytes_retransmit=9 bytes_invalid=0 send_seq=106596 receive_seq=106596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=54.5 mcu_temp: temp=43.1 sd_pos=883897 sysload=0.03 cputime=277.720 memavail=1628916 print_time=6407.578 buffer_time=3.876 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 6396.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3589975 bytes_read=2019834 bytes_retransmit=9 bytes_invalid=0 send_seq=106609 receive_seq=106609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=54.0 mcu_temp: temp=43.0 sd_pos=883897 sysload=0.03 cputime=277.774 memavail=1628904 print_time=6407.578 buffer_time=2.875 print_stall=0 extruder: target=215 temp=214.8 pwm=0.586
Stats 6397.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3590414 bytes_read=2020225 bytes_retransmit=9 bytes_invalid=0 send_seq=106624 receive_seq=106624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=883995 sysload=0.03 cputime=277.830 memavail=1628712 print_time=6410.060 buffer_time=4.357 print_stall=0 extruder: target=215 temp=215.0 pwm=0.401
Stats 6398.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3590732 bytes_read=2020602 bytes_retransmit=9 bytes_invalid=0 send_seq=106639 receive_seq=106639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=883995 sysload=0.02 cputime=277.881 memavail=1628964 print_time=6410.060 buffer_time=3.356 print_stall=0 extruder: target=215 temp=214.8 pwm=0.527
Stats 6399.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3590970 bytes_read=2020985 bytes_retransmit=9 bytes_invalid=0 send_seq=106653 receive_seq=106653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=54.9 pwm=0.420 rpi: temp=54.5 mcu_temp: temp=43.4 sd_pos=883995 sysload=0.02 cputime=277.933 memavail=1628684 print_time=6410.060 buffer_time=2.355 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 6400.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3591573 bytes_read=2021396 bytes_retransmit=9 bytes_invalid=0 send_seq=106672 receive_seq=106672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.264 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=884091 sysload=0.02 cputime=277.989 memavail=1628652 print_time=6412.600 buffer_time=3.895 print_stall=0 extruder: target=215 temp=215.1 pwm=0.302
Stats 6401.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3591804 bytes_read=2021753 bytes_retransmit=9 bytes_invalid=0 send_seq=106686 receive_seq=106686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=884091 sysload=0.02 cputime=278.041 memavail=1628900 print_time=6412.600 buffer_time=2.894 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 6402.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=3592286 bytes_read=2022140 bytes_retransmit=9 bytes_invalid=0 send_seq=106703 receive_seq=106703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=54.5 mcu_temp: temp=44.0 sd_pos=884187 sysload=0.02 cputime=278.098 memavail=1628456 print_time=6415.117 buffer_time=4.411 print_stall=0 extruder: target=215 temp=215.0 pwm=0.403
Stats 6403.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3592554 bytes_read=2022541 bytes_retransmit=9 bytes_invalid=0 send_seq=106717 receive_seq=106717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.445 rpi: temp=55.0 mcu_temp: temp=43.7 sd_pos=884187 sysload=0.02 cputime=278.152 memavail=1629032 print_time=6415.117 buffer_time=3.411 print_stall=0 extruder: target=215 temp=214.9 pwm=0.456
Stats 6404.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3592779 bytes_read=2022898 bytes_retransmit=9 bytes_invalid=0 send_seq=106731 receive_seq=106731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=884187 sysload=0.02 cputime=278.203 memavail=1629032 print_time=6415.117 buffer_time=2.411 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 6405.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3593369 bytes_read=2023305 bytes_retransmit=9 bytes_invalid=0 send_seq=106749 receive_seq=106749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=884283 sysload=0.02 cputime=278.261 memavail=1628720 print_time=6417.672 buffer_time=3.964 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 6406.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3593598 bytes_read=2023671 bytes_retransmit=9 bytes_invalid=0 send_seq=106762 receive_seq=106762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=55.0 mcu_temp: temp=44.3 sd_pos=884283 sysload=0.02 cputime=278.313 memavail=1628720 print_time=6417.672 buffer_time=2.964 print_stall=0 extruder: target=215 temp=214.9 pwm=0.420
Stats 6407.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000036 bytes_write=3594179 bytes_read=2024048 bytes_retransmit=9 bytes_invalid=0 send_seq=106780 receive_seq=106780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.455 rpi: temp=54.0 mcu_temp: temp=43.5 sd_pos=884415 sysload=0.02 cputime=278.368 memavail=1628720 print_time=6420.252 buffer_time=4.543 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 6408.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3594481 bytes_read=2024460 bytes_retransmit=9 bytes_invalid=0 send_seq=106796 receive_seq=106796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=884415 sysload=0.02 cputime=278.422 memavail=1628664 print_time=6420.252 buffer_time=3.543 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 6409.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3594719 bytes_read=2024836 bytes_retransmit=9 bytes_invalid=0 send_seq=106811 receive_seq=106811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.510 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=884415 sysload=0.02 cputime=278.476 memavail=1628724 print_time=6420.252 buffer_time=2.542 print_stall=0 extruder: target=215 temp=215.0 pwm=0.408
Stats 6410.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3595230 bytes_read=2025208 bytes_retransmit=9 bytes_invalid=0 send_seq=106828 receive_seq=106828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.431 rpi: temp=55.0 mcu_temp: temp=43.7 sd_pos=884510 sysload=0.02 cputime=278.514 memavail=1628732 print_time=6422.788 buffer_time=4.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 6411.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3595410 bytes_read=2025585 bytes_retransmit=9 bytes_invalid=0 send_seq=106840 receive_seq=106840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=43.6 sd_pos=884510 sysload=0.02 cputime=278.564 memavail=1629044 print_time=6422.788 buffer_time=3.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 6412.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000037 bytes_write=3595664 bytes_read=2025966 bytes_retransmit=9 bytes_invalid=0 send_seq=106856 receive_seq=106856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=884510 sysload=0.02 cputime=278.612 memavail=1629300 print_time=6422.788 buffer_time=2.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 6413.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=3596201 bytes_read=2026358 bytes_retransmit=9 bytes_invalid=0 send_seq=106874 receive_seq=106874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=55.0 mcu_temp: temp=43.9 sd_pos=884608 sysload=0.02 cputime=278.668 memavail=1629552 print_time=6425.212 buffer_time=3.499 print_stall=0 extruder: target=215 temp=215.1 pwm=0.370
Stats 6414.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=3596436 bytes_read=2026745 bytes_retransmit=9 bytes_invalid=0 send_seq=106888 receive_seq=106888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=884608 sysload=0.02 cputime=278.720 memavail=1629292 print_time=6425.212 buffer_time=2.498 print_stall=0 extruder: target=215 temp=215.1 pwm=0.370
Stats 6415.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=3596995 bytes_read=2027136 bytes_retransmit=9 bytes_invalid=0 send_seq=106906 receive_seq=106906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=884861 sysload=0.02 cputime=278.783 memavail=1629052 print_time=6427.650 buffer_time=3.935 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 6416.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=3597186 bytes_read=2027483 bytes_retransmit=9 bytes_invalid=0 send_seq=106918 receive_seq=106918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=884861 sysload=0.02 cputime=278.832 memavail=1629052 print_time=6427.650 buffer_time=2.935 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 6417.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=3597743 bytes_read=2027900 bytes_retransmit=9 bytes_invalid=0 send_seq=106938 receive_seq=106938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=884959 sysload=0.02 cputime=278.891 memavail=1628776 print_time=6430.076 buffer_time=4.361 print_stall=0 extruder: target=215 temp=214.7 pwm=0.622
Stats 6418.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3598088 bytes_read=2028301 bytes_retransmit=9 bytes_invalid=0 send_seq=106955 receive_seq=106955 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=884959 sysload=0.02 cputime=278.942 memavail=1628740 print_time=6430.076 buffer_time=3.360 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 6419.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3598280 bytes_read=2028648 bytes_retransmit=9 bytes_invalid=0 send_seq=106967 receive_seq=106967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=884959 sysload=0.02 cputime=278.992 memavail=1628752 print_time=6430.076 buffer_time=2.360 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 6420.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3599372 bytes_read=2029090 bytes_retransmit=9 bytes_invalid=0 send_seq=106992 receive_seq=106992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=885380 sysload=0.02 cputime=279.056 memavail=1629000 print_time=6432.769 buffer_time=4.052 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 6421.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3599581 bytes_read=2029456 bytes_retransmit=9 bytes_invalid=0 send_seq=107005 receive_seq=107005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.647 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=885380 sysload=0.02 cputime=279.109 memavail=1628748 print_time=6432.769 buffer_time=3.052 print_stall=0 extruder: target=215 temp=215.0 pwm=0.409
Stats 6422.0: gcodein=0 mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=3599774 bytes_read=2029803 bytes_retransmit=9 bytes_invalid=0 send_seq=107017 receive_seq=107017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.024 rpi: temp=55.0 mcu_temp: temp=43.8 sd_pos=885380 sysload=0.02 cputime=279.160 memavail=1628748 print_time=6432.769 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.0 pwm=0.460
Stats 6423.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=3601836 bytes_read=2030345 bytes_retransmit=9 bytes_invalid=0 send_seq=107059 receive_seq=107059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=885825 sysload=0.02 cputime=279.224 memavail=1628968 print_time=6433.750 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.0 pwm=0.460
Stats 6424.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=3603357 bytes_read=2030806 bytes_retransmit=9 bytes_invalid=0 send_seq=107091 receive_seq=107091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=886270 sysload=0.02 cputime=279.287 memavail=1629060 print_time=6434.827 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.0 pwm=0.460
Stats 6425.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=3604979 bytes_read=2031278 bytes_retransmit=9 bytes_invalid=0 send_seq=107128 receive_seq=107128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=54.5 mcu_temp: temp=43.6 sd_pos=886679 sysload=0.02 cputime=279.336 memavail=1628812 print_time=6435.959 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.2 pwm=0.307
Stats 6426.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=3606185 bytes_read=2031745 bytes_retransmit=9 bytes_invalid=0 send_seq=107158 receive_seq=107158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.067 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=886997 sysload=0.02 cputime=279.399 memavail=1628812 print_time=6436.961 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 6427.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000015 mcu_task_stddev=0.000033 bytes_write=3607321 bytes_read=2032186 bytes_retransmit=9 bytes_invalid=0 send_seq=107186 receive_seq=107186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.665 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=887219 sysload=0.02 cputime=279.458 memavail=1628812 print_time=6438.058 buffer_time=2.336 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 6428.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3608312 bytes_read=2032608 bytes_retransmit=9 bytes_invalid=0 send_seq=107210 receive_seq=107210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.587 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=887408 sysload=0.02 cputime=279.516 memavail=1628580 print_time=6438.853 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 6429.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3609518 bytes_read=2033070 bytes_retransmit=9 bytes_invalid=0 send_seq=107239 receive_seq=107239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.450 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=887695 sysload=0.01 cputime=279.577 memavail=1628564 print_time=6440.063 buffer_time=2.341 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 6430.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3610492 bytes_read=2033501 bytes_retransmit=9 bytes_invalid=0 send_seq=107265 receive_seq=107265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=887887 sysload=0.01 cputime=279.636 memavail=1628564 print_time=6440.907 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 6431.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3611351 bytes_read=2033898 bytes_retransmit=9 bytes_invalid=0 send_seq=107287 receive_seq=107287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.207 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=888142 sysload=0.01 cputime=279.692 memavail=1628564 print_time=6441.793 buffer_time=2.069 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 6432.0: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=3612662 bytes_read=2034355 bytes_retransmit=9 bytes_invalid=0 send_seq=107315 receive_seq=107315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.207 rpi: temp=54.5 mcu_temp: temp=43.4 sd_pos=888660 sysload=0.01 cputime=279.754 memavail=1628816 print_time=6442.986 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 6433.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3613690 bytes_read=2034795 bytes_retransmit=9 bytes_invalid=0 send_seq=107341 receive_seq=107341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.8 pwm=0.434 rpi: temp=55.0 mcu_temp: temp=43.1 sd_pos=888990 sysload=0.01 cputime=279.815 memavail=1628816 print_time=6443.868 buffer_time=2.143 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 6434.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3615429 bytes_read=2035271 bytes_retransmit=9 bytes_invalid=0 send_seq=107381 receive_seq=107381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.7 sd_pos=889637 sysload=0.01 cputime=279.883 memavail=1628760 print_time=6444.748 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 6435.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3617700 bytes_read=2035806 bytes_retransmit=9 bytes_invalid=0 send_seq=107427 receive_seq=107427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=43.6 sd_pos=890530 sysload=0.01 cputime=279.936 memavail=1628772 print_time=6445.783 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 6436.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3619797 bytes_read=2036306 bytes_retransmit=9 bytes_invalid=0 send_seq=107469 receive_seq=107469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=892453 sysload=0.01 cputime=280.021 memavail=1628704 print_time=6446.734 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.364
Stats 6437.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=3622053 bytes_read=2036815 bytes_retransmit=9 bytes_invalid=0 send_seq=107514 receive_seq=107514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=54.9 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=894807 sysload=0.01 cputime=280.110 memavail=1628956 print_time=6447.839 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 6438.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3625181 bytes_read=2037442 bytes_retransmit=9 bytes_invalid=0 send_seq=107573 receive_seq=107573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=897034 sysload=0.01 cputime=280.214 memavail=1628944 print_time=6448.917 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 6439.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3626797 bytes_read=2037913 bytes_retransmit=9 bytes_invalid=0 send_seq=107607 receive_seq=107607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=55.0 mcu_temp: temp=43.7 sd_pos=897979 sysload=0.01 cputime=280.282 memavail=1628896 print_time=6449.873 buffer_time=2.142 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 6440.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3629640 bytes_read=2038485 bytes_retransmit=9 bytes_invalid=0 send_seq=107664 receive_seq=107664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=900531 sysload=0.01 cputime=280.383 memavail=1628652 print_time=6450.920 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 6441.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3631979 bytes_read=2039027 bytes_retransmit=9 bytes_invalid=0 send_seq=107709 receive_seq=107709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=901895 sysload=0.01 cputime=280.461 memavail=1628652 print_time=6451.838 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.7 pwm=0.562
Stats 6442.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3633455 bytes_read=2039493 bytes_retransmit=9 bytes_invalid=0 send_seq=107742 receive_seq=107742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=54.5 mcu_temp: temp=43.8 sd_pos=904049 sysload=0.01 cputime=280.553 memavail=1628676 print_time=6452.854 buffer_time=2.121 print_stall=0 extruder: target=215 temp=214.8 pwm=0.509
Stats 6443.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=3634323 bytes_read=2039911 bytes_retransmit=9 bytes_invalid=0 send_seq=107765 receive_seq=107765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=904489 sysload=0.01 cputime=280.619 memavail=1628660 print_time=6454.059 buffer_time=2.327 print_stall=0 extruder: target=215 temp=214.6 pwm=0.590
Stats 6444.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=3635380 bytes_read=2040358 bytes_retransmit=9 bytes_invalid=0 send_seq=107791 receive_seq=107791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=905151 sysload=0.01 cputime=280.686 memavail=1628652 print_time=6454.798 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.8 pwm=0.487
Stats 6445.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=3637430 bytes_read=2040869 bytes_retransmit=9 bytes_invalid=0 send_seq=107833 receive_seq=107833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=54.5 mcu_temp: temp=43.7 sd_pos=906626 sysload=0.01 cputime=280.746 memavail=1628400 print_time=6455.826 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.7 pwm=0.536
Stats 6446.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=3638160 bytes_read=2041261 bytes_retransmit=9 bytes_invalid=0 send_seq=107854 receive_seq=107854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.336 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=906983 sysload=0.01 cputime=280.808 memavail=1628416 print_time=6456.912 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.9 pwm=0.403
Stats 6447.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=3639804 bytes_read=2041753 bytes_retransmit=9 bytes_invalid=0 send_seq=107889 receive_seq=107889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.044 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=908287 sysload=0.01 cputime=280.887 memavail=1628636 print_time=6457.962 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.412
Stats 6448.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3641537 bytes_read=2042218 bytes_retransmit=9 bytes_invalid=0 send_seq=107926 receive_seq=107926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=909829 sysload=0.01 cputime=280.959 memavail=1628412 print_time=6458.804 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.8 pwm=0.542
Stats 6449.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3643424 bytes_read=2042774 bytes_retransmit=9 bytes_invalid=0 send_seq=107969 receive_seq=107969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=910972 sysload=0.01 cputime=281.040 memavail=1628640 print_time=6459.960 buffer_time=2.224 print_stall=0 extruder: target=215 temp=214.9 pwm=0.446
Stats 6450.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3644200 bytes_read=2043206 bytes_retransmit=9 bytes_invalid=0 send_seq=107992 receive_seq=107992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.244 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=911358 sysload=0.01 cputime=281.108 memavail=1629100 print_time=6461.088 buffer_time=2.351 print_stall=0 extruder: target=215 temp=215.2 pwm=0.342
Stats 6451.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3646196 bytes_read=2043722 bytes_retransmit=9 bytes_invalid=0 send_seq=108035 receive_seq=108035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=913609 sysload=0.01 cputime=281.197 memavail=1629400 print_time=6461.907 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 6452.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=3648558 bytes_read=2044219 bytes_retransmit=9 bytes_invalid=0 send_seq=108082 receive_seq=108077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=916124 sysload=0.01 cputime=281.297 memavail=1629392 print_time=6463.003 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 6453.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=3649929 bytes_read=2044726 bytes_retransmit=9 bytes_invalid=0 send_seq=108112 receive_seq=108112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=917777 sysload=0.01 cputime=281.376 memavail=1629396 print_time=6463.768 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.1 pwm=0.502
Stats 6454.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=3651129 bytes_read=2045172 bytes_retransmit=9 bytes_invalid=0 send_seq=108141 receive_seq=108141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.332 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=918656 sysload=0.01 cputime=281.449 memavail=1629144 print_time=6464.934 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.3 pwm=0.323
Stats 6455.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=3651750 bytes_read=2045554 bytes_retransmit=9 bytes_invalid=0 send_seq=108160 receive_seq=108160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.428 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=918907 sysload=0.01 cputime=281.494 memavail=1629152 print_time=6465.778 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.1 pwm=0.505
Stats 6456.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=3654049 bytes_read=2046106 bytes_retransmit=9 bytes_invalid=0 send_seq=108207 receive_seq=108207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=921699 sysload=0.01 cputime=281.598 memavail=1629168 print_time=6466.910 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.2 pwm=0.447
Stats 6457.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=3656584 bytes_read=2046652 bytes_retransmit=9 bytes_invalid=0 send_seq=108256 receive_seq=108256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=924461 sysload=0.01 cputime=281.695 memavail=1629412 print_time=6467.981 buffer_time=2.232 print_stall=0 extruder: target=215 temp=215.2 pwm=0.439
Stats 6458.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3659582 bytes_read=2047239 bytes_retransmit=9 bytes_invalid=0 send_seq=108313 receive_seq=108313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=926041 sysload=0.01 cputime=281.777 memavail=1629400 print_time=6469.030 buffer_time=2.280 print_stall=0 extruder: target=215 temp=215.2 pwm=0.437
Stats 6459.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3661560 bytes_read=2047761 bytes_retransmit=9 bytes_invalid=0 send_seq=108354 receive_seq=108354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=54.5 mcu_temp: temp=43.5 sd_pos=927568 sysload=0.01 cputime=281.830 memavail=1629416 print_time=6469.929 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.3 pwm=0.373
Stats 6460.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3663325 bytes_read=2048273 bytes_retransmit=9 bytes_invalid=0 send_seq=108394 receive_seq=108394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.115 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=929051 sysload=0.01 cputime=281.909 memavail=1629408 print_time=6470.811 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.3 pwm=0.363
Stats 6461.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3665789 bytes_read=2048810 bytes_retransmit=9 bytes_invalid=0 send_seq=108444 receive_seq=108444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.034 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=931288 sysload=0.01 cputime=282.004 memavail=1629164 print_time=6471.866 buffer_time=2.114 print_stall=0 extruder: target=215 temp=215.1 pwm=0.553
Stats 6462.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3667676 bytes_read=2049322 bytes_retransmit=9 bytes_invalid=0 send_seq=108483 receive_seq=108483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=934598 sysload=0.01 cputime=282.117 memavail=1629416 print_time=6472.884 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.3 pwm=0.391
Stats 6463.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000055 bytes_write=3670174 bytes_read=2049889 bytes_retransmit=9 bytes_invalid=0 send_seq=108533 receive_seq=108533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=936298 sysload=0.01 cputime=282.205 memavail=1629164 print_time=6473.811 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.2 pwm=0.438
Stats 6464.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000055 bytes_write=3672109 bytes_read=2050376 bytes_retransmit=9 bytes_invalid=0 send_seq=108573 receive_seq=108573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=938907 sysload=0.01 cputime=282.298 memavail=1629408 print_time=6474.845 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.2 pwm=0.438
Stats 6465.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000055 bytes_write=3674329 bytes_read=2050913 bytes_retransmit=9 bytes_invalid=0 send_seq=108617 receive_seq=108617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.089 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=941032 sysload=0.01 cputime=282.397 memavail=1629476 print_time=6476.003 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.2 pwm=0.402
Stats 6466.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000055 bytes_write=3676704 bytes_read=2051464 bytes_retransmit=9 bytes_invalid=0 send_seq=108667 receive_seq=108667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=54.0 mcu_temp: temp=43.9 sd_pos=942771 sysload=0.01 cputime=282.486 memavail=1628964 print_time=6477.018 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.2 pwm=0.349
Stats 6467.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000055 bytes_write=3677899 bytes_read=2051891 bytes_retransmit=9 bytes_invalid=0 send_seq=108695 receive_seq=108695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=943972 sysload=0.01 cputime=282.559 memavail=1628940 print_time=6477.801 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 6468.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3679972 bytes_read=2052434 bytes_retransmit=9 bytes_invalid=0 send_seq=108741 receive_seq=108737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=946184 sysload=0.01 cputime=282.654 memavail=1629224 print_time=6478.976 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 6469.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3681282 bytes_read=2052915 bytes_retransmit=9 bytes_invalid=0 send_seq=108773 receive_seq=108773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.488 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=947536 sysload=0.01 cputime=282.733 memavail=1629224 print_time=6479.795 buffer_time=2.032 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 6470.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3684185 bytes_read=2053487 bytes_retransmit=9 bytes_invalid=0 send_seq=108830 receive_seq=108830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=950056 sysload=0.01 cputime=282.830 memavail=1628628 print_time=6480.927 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6471.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3686042 bytes_read=2054004 bytes_retransmit=9 bytes_invalid=0 send_seq=108870 receive_seq=108870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=953078 sysload=0.01 cputime=282.931 memavail=1628420 print_time=6481.969 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6472.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3688411 bytes_read=2054535 bytes_retransmit=9 bytes_invalid=0 send_seq=108916 receive_seq=108916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=955556 sysload=0.01 cputime=283.025 memavail=1628412 print_time=6482.968 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6473.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3690091 bytes_read=2055018 bytes_retransmit=9 bytes_invalid=0 send_seq=108952 receive_seq=108952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=957665 sysload=0.01 cputime=283.115 memavail=1628416 print_time=6483.935 buffer_time=2.169 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6474.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3691239 bytes_read=2055465 bytes_retransmit=9 bytes_invalid=0 send_seq=108978 receive_seq=108978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=958163 sysload=0.00 cputime=283.167 memavail=1628668 print_time=6484.910 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6475.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3691953 bytes_read=2055861 bytes_retransmit=9 bytes_invalid=0 send_seq=108997 receive_seq=108997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.458 rpi: temp=55.0 mcu_temp: temp=43.9 sd_pos=958401 sysload=0.00 cputime=283.211 memavail=1628360 print_time=6486.065 buffer_time=2.298 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 6476.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=3692431 bytes_read=2056233 bytes_retransmit=9 bytes_invalid=0 send_seq=109014 receive_seq=109014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.052 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=958602 sysload=0.00 cputime=283.271 memavail=1628700 print_time=6486.959 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.8 pwm=0.568
Stats 6477.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3693059 bytes_read=2056674 bytes_retransmit=9 bytes_invalid=0 send_seq=109033 receive_seq=109033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996355 heater_bed: target=55 temp=54.8 pwm=0.947 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=958799 sysload=0.00 cputime=283.334 memavail=1628296 print_time=6487.984 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.1 pwm=0.390
Stats 6478.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3693710 bytes_read=2057061 bytes_retransmit=9 bytes_invalid=0 send_seq=109053 receive_seq=109053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=959030 sysload=0.00 cputime=283.392 memavail=1628236 print_time=6489.139 buffer_time=2.371 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 6479.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3694205 bytes_read=2057433 bytes_retransmit=9 bytes_invalid=0 send_seq=109070 receive_seq=109070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=959235 sysload=0.00 cputime=283.450 memavail=1628044 print_time=6490.033 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 6480.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3695003 bytes_read=2057884 bytes_retransmit=9 bytes_invalid=0 send_seq=109094 receive_seq=109094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=959477 sysload=0.00 cputime=283.511 memavail=1628540 print_time=6490.771 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 6481.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3695949 bytes_read=2058306 bytes_retransmit=9 bytes_invalid=0 send_seq=109121 receive_seq=109121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.1 pwm=0.147 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=959625 sysload=0.00 cputime=283.571 memavail=1628812 print_time=6492.021 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 6482.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3696865 bytes_read=2058708 bytes_retransmit=9 bytes_invalid=0 send_seq=109144 receive_seq=109144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=959781 sysload=0.00 cputime=283.616 memavail=1628792 print_time=6493.121 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 6483.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3697835 bytes_read=2059189 bytes_retransmit=9 bytes_invalid=0 send_seq=109171 receive_seq=109171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=959958 sysload=0.00 cputime=283.676 memavail=1629116 print_time=6494.292 buffer_time=2.520 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 6484.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3698534 bytes_read=2059581 bytes_retransmit=9 bytes_invalid=0 send_seq=109192 receive_seq=109192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=960015 sysload=0.00 cputime=283.732 memavail=1629368 print_time=6494.881 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 6485.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3699428 bytes_read=2059993 bytes_retransmit=9 bytes_invalid=0 send_seq=109217 receive_seq=109217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.2 sd_pos=960189 sysload=0.00 cputime=283.794 memavail=1629680 print_time=6496.162 buffer_time=2.388 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 6486.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3700052 bytes_read=2060424 bytes_retransmit=9 bytes_invalid=0 send_seq=109237 receive_seq=109237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.425 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=960278 sysload=0.00 cputime=283.852 memavail=1629680 print_time=6496.813 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 6487.0: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=3701601 bytes_read=2060881 bytes_retransmit=9 bytes_invalid=0 send_seq=109271 receive_seq=109271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=960695 sysload=0.00 cputime=283.913 memavail=1629680 print_time=6498.345 buffer_time=2.570 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 6488.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3703694 bytes_read=2061403 bytes_retransmit=9 bytes_invalid=0 send_seq=109315 receive_seq=109315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.454 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=961934 sysload=0.00 cputime=283.988 memavail=1629996 print_time=6499.034 buffer_time=2.258 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 6489.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3706693 bytes_read=2062019 bytes_retransmit=9 bytes_invalid=0 send_seq=109372 receive_seq=109372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.720 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=963192 sysload=0.00 cputime=284.064 memavail=1629748 print_time=6499.941 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 6490.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3708539 bytes_read=2062496 bytes_retransmit=9 bytes_invalid=0 send_seq=109410 receive_seq=109410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=963568 sysload=0.00 cputime=284.130 memavail=1629748 print_time=6500.911 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 6491.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3709789 bytes_read=2062943 bytes_retransmit=9 bytes_invalid=0 send_seq=109439 receive_seq=109439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=8 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=963887 sysload=0.00 cputime=284.196 memavail=1629768 print_time=6501.965 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 6492.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=3711025 bytes_read=2063404 bytes_retransmit=9 bytes_invalid=0 send_seq=109468 receive_seq=109468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.465 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=964088 sysload=0.00 cputime=284.260 memavail=1629488 print_time=6502.849 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.0 pwm=0.533
Stats 6493.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=3712498 bytes_read=2063867 bytes_retransmit=9 bytes_invalid=0 send_seq=109502 receive_seq=109502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=964405 sysload=0.00 cputime=284.321 memavail=1629504 print_time=6504.030 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 6494.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=3713626 bytes_read=2064288 bytes_retransmit=9 bytes_invalid=0 send_seq=109528 receive_seq=109528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=964605 sysload=0.00 cputime=284.382 memavail=1628940 print_time=6505.047 buffer_time=2.267 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 6495.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=3714479 bytes_read=2064712 bytes_retransmit=9 bytes_invalid=0 send_seq=109552 receive_seq=109552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=964744 sysload=0.00 cputime=284.426 memavail=1628128 print_time=6505.812 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 6496.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=3715623 bytes_read=2065131 bytes_retransmit=9 bytes_invalid=0 send_seq=109580 receive_seq=109580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=55.0 mcu_temp: temp=43.9 sd_pos=964975 sysload=0.00 cputime=284.489 memavail=1628632 print_time=6507.103 buffer_time=2.322 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 6497.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=3716485 bytes_read=2065543 bytes_retransmit=9 bytes_invalid=0 send_seq=109602 receive_seq=109602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=965091 sysload=0.00 cputime=284.548 memavail=1628324 print_time=6508.016 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.2 pwm=0.413
Stats 6498.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=3717277 bytes_read=2065979 bytes_retransmit=9 bytes_invalid=0 send_seq=109623 receive_seq=109623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.047 rpi: temp=55.0 mcu_temp: temp=43.9 sd_pos=965204 sysload=0.00 cputime=284.606 memavail=1628324 print_time=6508.984 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 6499.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=3718193 bytes_read=2066381 bytes_retransmit=9 bytes_invalid=0 send_seq=109646 receive_seq=109646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=965374 sysload=0.00 cputime=284.669 memavail=1628264 print_time=6510.014 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 6500.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=3719140 bytes_read=2066803 bytes_retransmit=9 bytes_invalid=0 send_seq=109670 receive_seq=109670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=54.9 pwm=0.547 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=965489 sysload=0.00 cputime=284.729 memavail=1627992 print_time=6511.162 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.2 pwm=0.325
Stats 6501.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=3720084 bytes_read=2067244 bytes_retransmit=9 bytes_invalid=0 send_seq=109695 receive_seq=109695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.062 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=965637 sysload=0.00 cputime=284.789 memavail=1627960 print_time=6512.339 buffer_time=2.556 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6502.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=3720668 bytes_read=2067616 bytes_retransmit=9 bytes_invalid=0 send_seq=109712 receive_seq=109712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=965726 sysload=0.00 cputime=284.845 memavail=1628060 print_time=6512.924 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6503.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3721522 bytes_read=2068043 bytes_retransmit=9 bytes_invalid=0 send_seq=109734 receive_seq=109734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.036 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=965874 sysload=0.00 cputime=284.903 memavail=1628516 print_time=6514.098 buffer_time=2.314 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 6504.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3722425 bytes_read=2068479 bytes_retransmit=9 bytes_invalid=0 send_seq=109758 receive_seq=109758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=965992 sysload=0.08 cputime=284.958 memavail=1628328 print_time=6515.240 buffer_time=2.456 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 6505.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3723041 bytes_read=2068856 bytes_retransmit=9 bytes_invalid=0 send_seq=109776 receive_seq=109776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=55.0 mcu_temp: temp=43.8 sd_pos=966079 sysload=0.08 cputime=284.998 memavail=1628036 print_time=6515.806 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.1 pwm=0.374
Stats 6506.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3723870 bytes_read=2069268 bytes_retransmit=9 bytes_invalid=0 send_seq=109798 receive_seq=109798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=966232 sysload=0.08 cputime=285.060 memavail=1627872 print_time=6516.794 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 6507.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000023 mcu_task_stddev=0.000058 bytes_write=3726101 bytes_read=2069809 bytes_retransmit=9 bytes_invalid=0 send_seq=109843 receive_seq=109843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=967588 sysload=0.08 cputime=285.138 memavail=1627860 print_time=6517.873 buffer_time=2.083 print_stall=0 extruder: target=215 temp=214.8 pwm=0.616
Stats 6508.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3728619 bytes_read=2070366 bytes_retransmit=9 bytes_invalid=0 send_seq=109894 receive_seq=109894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.373 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=969044 sysload=0.08 cputime=285.220 memavail=1628092 print_time=6518.941 buffer_time=2.148 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 6509.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3730117 bytes_read=2070838 bytes_retransmit=9 bytes_invalid=0 send_seq=109928 receive_seq=109928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=969323 sysload=0.24 cputime=285.269 memavail=1627668 print_time=6520.115 buffer_time=2.321 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 6510.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3731064 bytes_read=2071279 bytes_retransmit=9 bytes_invalid=0 send_seq=109953 receive_seq=109953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=54.9 pwm=0.487 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=969477 sysload=0.24 cputime=285.309 memavail=1627348 print_time=6520.912 buffer_time=2.114 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 6511.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3732007 bytes_read=2071681 bytes_retransmit=9 bytes_invalid=0 send_seq=109976 receive_seq=109976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.013 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=969661 sysload=0.24 cputime=285.367 memavail=1627356 print_time=6521.814 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 6512.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000055 bytes_write=3733213 bytes_read=2072118 bytes_retransmit=9 bytes_invalid=0 send_seq=110003 receive_seq=110003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.441 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=969906 sysload=0.24 cputime=285.429 memavail=1627512 print_time=6522.982 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 6513.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=3734518 bytes_read=2072604 bytes_retransmit=9 bytes_invalid=0 send_seq=110034 receive_seq=110034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.080 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=970151 sysload=0.24 cputime=285.494 memavail=1627580 print_time=6524.121 buffer_time=2.322 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 6514.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=3735503 bytes_read=2073016 bytes_retransmit=9 bytes_invalid=0 send_seq=110059 receive_seq=110059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.594 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=970334 sysload=0.30 cputime=285.556 memavail=1627808 print_time=6524.930 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.2 pwm=0.317
Stats 6515.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=3736589 bytes_read=2073443 bytes_retransmit=9 bytes_invalid=0 send_seq=110084 receive_seq=110084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=970548 sysload=0.30 cputime=285.605 memavail=1628284 print_time=6526.230 buffer_time=2.429 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 6516.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=3737465 bytes_read=2073869 bytes_retransmit=9 bytes_invalid=0 send_seq=110106 receive_seq=110106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=970671 sysload=0.30 cputime=285.662 memavail=1627988 print_time=6527.193 buffer_time=2.392 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 6517.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=3738413 bytes_read=2074271 bytes_retransmit=9 bytes_invalid=0 send_seq=110129 receive_seq=110129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=970854 sysload=0.30 cputime=285.719 memavail=1627936 print_time=6528.189 buffer_time=2.387 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6518.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3739320 bytes_read=2074703 bytes_retransmit=9 bytes_invalid=0 send_seq=110152 receive_seq=110152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=971039 sysload=0.30 cputime=285.776 memavail=1627440 print_time=6529.142 buffer_time=2.339 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6519.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3741442 bytes_read=2075239 bytes_retransmit=9 bytes_invalid=0 send_seq=110196 receive_seq=110196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.009 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=971941 sysload=0.27 cputime=285.846 memavail=1627440 print_time=6530.593 buffer_time=2.789 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 6520.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3743088 bytes_read=2075701 bytes_retransmit=9 bytes_invalid=0 send_seq=110231 receive_seq=110231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.423 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=973426 sysload=0.27 cputime=285.892 memavail=1627440 print_time=6531.132 buffer_time=2.329 print_stall=0 extruder: target=215 temp=215.1 pwm=0.366
Stats 6521.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3745053 bytes_read=2076219 bytes_retransmit=9 bytes_invalid=0 send_seq=110272 receive_seq=110272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.439 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=974029 sysload=0.27 cputime=285.961 memavail=1627440 print_time=6532.059 buffer_time=2.255 print_stall=0 extruder: target=215 temp=214.9 pwm=0.450
Stats 6522.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=3746391 bytes_read=2076695 bytes_retransmit=9 bytes_invalid=0 send_seq=110304 receive_seq=110304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=974361 sysload=0.27 cputime=286.022 memavail=1627696 print_time=6532.976 buffer_time=2.171 print_stall=0 extruder: target=215 temp=214.8 pwm=0.525
Stats 6523.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3749847 bytes_read=2077317 bytes_retransmit=9 bytes_invalid=0 send_seq=110368 receive_seq=110368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=55.0 mcu_temp: temp=43.0 sd_pos=976468 sysload=0.27 cputime=286.126 memavail=1627424 print_time=6534.293 buffer_time=2.487 print_stall=0 extruder: target=215 temp=214.9 pwm=0.413
Stats 6524.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3751191 bytes_read=2077769 bytes_retransmit=9 bytes_invalid=0 send_seq=110398 receive_seq=110398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=977775 sysload=0.25 cputime=286.206 memavail=1627472 print_time=6534.845 buffer_time=2.039 print_stall=0 extruder: target=215 temp=214.9 pwm=0.412
Stats 6525.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3753337 bytes_read=2078295 bytes_retransmit=9 bytes_invalid=0 send_seq=110440 receive_seq=110440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=980129 sysload=0.25 cputime=286.298 memavail=1627264 print_time=6535.828 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 6526.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3757020 bytes_read=2078922 bytes_retransmit=9 bytes_invalid=0 send_seq=110508 receive_seq=110508 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=982588 sysload=0.25 cputime=286.392 memavail=1627008 print_time=6537.209 buffer_time=2.401 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 6527.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3758550 bytes_read=2079404 bytes_retransmit=9 bytes_invalid=0 send_seq=110541 receive_seq=110541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=983326 sysload=0.25 cputime=286.462 memavail=1627264 print_time=6537.820 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 6528.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=3761250 bytes_read=2079981 bytes_retransmit=9 bytes_invalid=0 send_seq=110593 receive_seq=110593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=985034 sysload=0.25 cputime=286.549 memavail=1627752 print_time=6539.112 buffer_time=2.302 print_stall=0 extruder: target=215 temp=214.9 pwm=0.497
Stats 6529.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=3762937 bytes_read=2080443 bytes_retransmit=9 bytes_invalid=0 send_seq=110628 receive_seq=110628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.500 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=985870 sysload=0.23 cputime=286.620 memavail=1627488 print_time=6539.846 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.0 pwm=0.393
Stats 6530.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=3764231 bytes_read=2080905 bytes_retransmit=9 bytes_invalid=0 send_seq=110657 receive_seq=110657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=986290 sysload=0.23 cputime=286.691 memavail=1627432 print_time=6541.017 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 6531.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=3765488 bytes_read=2081351 bytes_retransmit=9 bytes_invalid=0 send_seq=110686 receive_seq=110686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=987117 sysload=0.23 cputime=286.759 memavail=1627276 print_time=6542.019 buffer_time=2.208 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 6532.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=3767554 bytes_read=2081848 bytes_retransmit=9 bytes_invalid=0 send_seq=110728 receive_seq=110728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.518 rpi: temp=55.0 mcu_temp: temp=43.1 sd_pos=988802 sysload=0.23 cputime=286.847 memavail=1627492 print_time=6542.840 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.0 pwm=0.390
Stats 6533.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=3769903 bytes_read=2082410 bytes_retransmit=9 bytes_invalid=0 send_seq=110774 receive_seq=110774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=991222 sysload=0.23 cputime=286.938 memavail=1627240 print_time=6543.924 buffer_time=2.111 print_stall=0 extruder: target=215 temp=215.0 pwm=0.395
Stats 6534.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=3772555 bytes_read=2082971 bytes_retransmit=9 bytes_invalid=0 send_seq=110826 receive_seq=110826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=992958 sysload=0.21 cputime=287.025 memavail=1627208 print_time=6545.125 buffer_time=2.311 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 6535.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=3774233 bytes_read=2083433 bytes_retransmit=9 bytes_invalid=0 send_seq=110861 receive_seq=110861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=994397 sysload=0.21 cputime=287.075 memavail=1627420 print_time=6545.931 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.1 pwm=0.357
Stats 6536.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=3775740 bytes_read=2083915 bytes_retransmit=9 bytes_invalid=0 send_seq=110894 receive_seq=110894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=55.5 mcu_temp: temp=42.9 sd_pos=996147 sysload=0.21 cputime=287.162 memavail=1627428 print_time=6546.928 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 6537.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=3776468 bytes_read=2084316 bytes_retransmit=9 bytes_invalid=0 send_seq=110914 receive_seq=110914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.613 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=996399 sysload=0.21 cputime=287.218 memavail=1627360 print_time=6547.821 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 6538.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3778110 bytes_read=2084793 bytes_retransmit=9 bytes_invalid=0 send_seq=110949 receive_seq=110949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=54.5 mcu_temp: temp=42.8 sd_pos=997198 sysload=0.21 cputime=287.291 memavail=1627612 print_time=6549.021 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 6539.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3779922 bytes_read=2085300 bytes_retransmit=9 bytes_invalid=0 send_seq=110987 receive_seq=110987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.1 sd_pos=999063 sysload=0.20 cputime=287.386 memavail=1627336 print_time=6550.059 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.0 pwm=0.414
Stats 6540.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3781495 bytes_read=2085776 bytes_retransmit=9 bytes_invalid=0 send_seq=111022 receive_seq=111022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=42.9 sd_pos=1000908 sysload=0.20 cputime=287.469 memavail=1627300 print_time=6550.863 buffer_time=2.046 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 6541.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3783559 bytes_read=2086268 bytes_retransmit=9 bytes_invalid=0 send_seq=111063 receive_seq=111063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=1003150 sysload=0.20 cputime=287.556 memavail=1626772 print_time=6551.903 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 6542.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3785490 bytes_read=2086770 bytes_retransmit=9 bytes_invalid=0 send_seq=111100 receive_seq=111100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.216 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=1005174 sysload=0.20 cputime=287.649 memavail=1627312 print_time=6552.986 buffer_time=2.169 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 6543.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=3787677 bytes_read=2087317 bytes_retransmit=9 bytes_invalid=0 send_seq=111146 receive_seq=111146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=1006961 sysload=0.20 cputime=287.738 memavail=1627304 print_time=6553.944 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 6544.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=3789332 bytes_read=2087784 bytes_retransmit=9 bytes_invalid=0 send_seq=111182 receive_seq=111182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=1008899 sysload=0.18 cputime=287.825 memavail=1627548 print_time=6555.108 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.0 pwm=0.382
Stats 6545.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=3791447 bytes_read=2088316 bytes_retransmit=9 bytes_invalid=0 send_seq=111225 receive_seq=111225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=1010203 sysload=0.18 cputime=287.879 memavail=1627376 print_time=6556.158 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.0 pwm=0.376
Stats 6546.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=3792571 bytes_read=2088752 bytes_retransmit=9 bytes_invalid=0 send_seq=111252 receive_seq=111252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=1010502 sysload=0.18 cputime=287.945 memavail=1627604 print_time=6557.039 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 6547.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=3793144 bytes_read=2089129 bytes_retransmit=9 bytes_invalid=0 send_seq=111270 receive_seq=111270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.529 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=1010766 sysload=0.18 cputime=288.009 memavail=1628108 print_time=6557.908 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.8 pwm=0.518
Stats 6548.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=3794157 bytes_read=2089581 bytes_retransmit=9 bytes_invalid=0 send_seq=111294 receive_seq=111294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=55.5 mcu_temp: temp=42.8 sd_pos=1011497 sysload=0.18 cputime=288.083 memavail=1628112 print_time=6558.978 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.9 pwm=0.467
Stats 6549.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=3796468 bytes_read=2090082 bytes_retransmit=9 bytes_invalid=0 send_seq=111341 receive_seq=111334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=1013736 sysload=0.16 cputime=288.177 memavail=1628400 print_time=6560.064 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.0 pwm=0.380
Stats 6550.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=3798348 bytes_read=2090589 bytes_retransmit=9 bytes_invalid=0 send_seq=111378 receive_seq=111378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=1015610 sysload=0.16 cputime=288.256 memavail=1628420 print_time=6560.898 buffer_time=2.069 print_stall=0 extruder: target=215 temp=214.7 pwm=0.542
Stats 6551.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=3800845 bytes_read=2091151 bytes_retransmit=9 bytes_invalid=0 send_seq=111427 receive_seq=111427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=56.0 mcu_temp: temp=42.8 sd_pos=1018436 sysload=0.16 cputime=288.357 memavail=1628752 print_time=6561.965 buffer_time=2.135 print_stall=0 extruder: target=215 temp=215.1 pwm=0.362
Stats 6552.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=3803479 bytes_read=2091714 bytes_retransmit=9 bytes_invalid=0 send_seq=111480 receive_seq=111480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=1021206 sysload=0.16 cputime=288.457 memavail=1628508 print_time=6563.052 buffer_time=2.221 print_stall=0 extruder: target=215 temp=214.8 pwm=0.558
Stats 6553.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=3805111 bytes_read=2092182 bytes_retransmit=9 bytes_invalid=0 send_seq=111515 receive_seq=111515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.1 sd_pos=1022368 sysload=0.16 cputime=288.529 memavail=1628752 print_time=6564.174 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.0 pwm=0.375
Stats 6554.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=3805699 bytes_read=2092572 bytes_retransmit=9 bytes_invalid=0 send_seq=111532 receive_seq=111532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=54.9 pwm=0.345 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=1022581 sysload=0.15 cputime=288.584 memavail=1628484 print_time=6564.844 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 6555.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=3807446 bytes_read=2093052 bytes_retransmit=9 bytes_invalid=0 send_seq=111570 receive_seq=111570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=1024081 sysload=0.15 cputime=288.640 memavail=1628516 print_time=6565.873 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 6556.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=3810736 bytes_read=2093645 bytes_retransmit=9 bytes_invalid=0 send_seq=111632 receive_seq=111632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.2 sd_pos=1027700 sysload=0.15 cputime=288.749 memavail=1628612 print_time=6567.187 buffer_time=2.353 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6557.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=3812292 bytes_read=2094137 bytes_retransmit=9 bytes_invalid=0 send_seq=111667 receive_seq=111667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=54.5 mcu_temp: temp=43.3 sd_pos=1029967 sysload=0.15 cputime=288.846 memavail=1628620 print_time=6567.989 buffer_time=2.153 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 6558.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3815636 bytes_read=2094778 bytes_retransmit=9 bytes_invalid=0 send_seq=111732 receive_seq=111732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=56.5 mcu_temp: temp=43.2 sd_pos=1033297 sysload=0.15 cputime=288.918 memavail=1628624 print_time=6569.325 buffer_time=2.489 print_stall=0 extruder: target=215 temp=215.1 pwm=0.348
Stats 6559.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3816755 bytes_read=2095205 bytes_retransmit=9 bytes_invalid=0 send_seq=111760 receive_seq=111760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=1034432 sysload=0.14 cputime=288.995 memavail=1628608 print_time=6569.864 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 6560.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3819125 bytes_read=2095762 bytes_retransmit=9 bytes_invalid=0 send_seq=111808 receive_seq=111808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.3 sd_pos=1036423 sysload=0.14 cputime=289.088 memavail=1628628 print_time=6570.927 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 6561.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3821063 bytes_read=2096268 bytes_retransmit=9 bytes_invalid=0 send_seq=111849 receive_seq=111849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=55.0 mcu_temp: temp=43.3 sd_pos=1038788 sysload=0.14 cputime=289.175 memavail=1628640 print_time=6571.964 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.1 pwm=0.371
Stats 6562.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=3823358 bytes_read=2096806 bytes_retransmit=9 bytes_invalid=0 send_seq=111896 receive_seq=111896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.056 rpi: temp=56.5 mcu_temp: temp=43.1 sd_pos=1040948 sysload=0.14 cputime=289.269 memavail=1628392 print_time=6573.094 buffer_time=2.252 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 6563.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=3826178 bytes_read=2097413 bytes_retransmit=9 bytes_invalid=0 send_seq=111954 receive_seq=111954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=1043185 sysload=0.14 cputime=289.366 memavail=1628940 print_time=6574.335 buffer_time=2.493 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 6564.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=3827634 bytes_read=2097889 bytes_retransmit=9 bytes_invalid=0 send_seq=111989 receive_seq=111989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=56.0 mcu_temp: temp=43.1 sd_pos=1044534 sysload=0.13 cputime=289.438 memavail=1628960 print_time=6574.883 buffer_time=2.041 print_stall=0 extruder: target=215 temp=214.9 pwm=0.450
Stats 6565.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=3829885 bytes_read=2098401 bytes_retransmit=9 bytes_invalid=0 send_seq=112034 receive_seq=112034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.055 rpi: temp=56.0 mcu_temp: temp=43.0 sd_pos=1048125 sysload=0.13 cputime=289.544 memavail=1629192 print_time=6575.918 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 6566.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=3831445 bytes_read=2098893 bytes_retransmit=9 bytes_invalid=0 send_seq=112069 receive_seq=112069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.501 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=1049096 sysload=0.13 cputime=289.618 memavail=1629196 print_time=6577.114 buffer_time=2.270 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 6567.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=3832049 bytes_read=2099299 bytes_retransmit=9 bytes_invalid=0 send_seq=112090 receive_seq=112090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.2 sd_pos=1049302 sysload=0.13 cputime=289.680 memavail=1629004 print_time=6578.132 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.1 pwm=0.339
Stats 6568.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3832701 bytes_read=2099707 bytes_retransmit=9 bytes_invalid=0 send_seq=112111 receive_seq=112111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.468 rpi: temp=55.0 mcu_temp: temp=43.1 sd_pos=1049540 sysload=0.13 cputime=289.742 memavail=1629004 print_time=6579.252 buffer_time=2.407 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 6569.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3833212 bytes_read=2100119 bytes_retransmit=9 bytes_invalid=0 send_seq=112130 receive_seq=112130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=1049752 sysload=0.12 cputime=289.780 memavail=1629004 print_time=6580.169 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6570.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3833721 bytes_read=2100510 bytes_retransmit=9 bytes_invalid=0 send_seq=112148 receive_seq=112148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=42.5 sd_pos=1049907 sysload=0.12 cputime=289.840 memavail=1628988 print_time=6580.848 buffer_time=2.002 print_stall=0 extruder: target=215 temp=214.8 pwm=0.620
Stats 6571.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3834359 bytes_read=2100912 bytes_retransmit=9 bytes_invalid=0 send_seq=112171 receive_seq=112171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=1050118 sysload=0.12 cputime=289.906 memavail=1628988 print_time=6581.866 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.1 pwm=0.383
Stats 6572.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000060 bytes_write=3835914 bytes_read=2101409 bytes_retransmit=9 bytes_invalid=0 send_seq=112207 receive_seq=112207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=54.5 mcu_temp: temp=43.2 sd_pos=1051313 sysload=0.12 cputime=289.981 memavail=1629020 print_time=6583.138 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 6573.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3836821 bytes_read=2101855 bytes_retransmit=9 bytes_invalid=0 send_seq=112233 receive_seq=112233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.613 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=1051468 sysload=0.12 cputime=290.043 memavail=1629020 print_time=6584.197 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.1 pwm=0.429
Stats 6574.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3837852 bytes_read=2102277 bytes_retransmit=9 bytes_invalid=0 send_seq=112260 receive_seq=112260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.566 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=1051654 sysload=0.11 cputime=290.088 memavail=1628520 print_time=6585.377 buffer_time=2.530 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 6575.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3838547 bytes_read=2102709 bytes_retransmit=9 bytes_invalid=0 send_seq=112283 receive_seq=112283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.337 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=1051746 sysload=0.11 cputime=290.132 memavail=1628772 print_time=6586.032 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 6576.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3839474 bytes_read=2103135 bytes_retransmit=9 bytes_invalid=0 send_seq=112308 receive_seq=112308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=1051898 sysload=0.11 cputime=290.190 memavail=1628768 print_time=6587.361 buffer_time=2.512 print_stall=0 extruder: target=215 temp=215.1 pwm=0.477
Stats 6577.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000054 bytes_write=3840188 bytes_read=2103542 bytes_retransmit=9 bytes_invalid=0 send_seq=112332 receive_seq=112332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=1051986 sysload=0.11 cputime=290.251 memavail=1628492 print_time=6588.006 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 6578.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3841141 bytes_read=2104004 bytes_retransmit=9 bytes_invalid=0 send_seq=112358 receive_seq=112358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=1052141 sysload=0.11 cputime=290.316 memavail=1629048 print_time=6589.322 buffer_time=2.472 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
TMC 'stepper_z' reports DRV_STATUS: 40120101 otpw=1(OvertempWarning!) t120=1 cs_actual=18 stealth=1
Stats 6579.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3841792 bytes_read=2104415 bytes_retransmit=9 bytes_invalid=0 send_seq=112380 receive_seq=112380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.376 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1052232 sysload=0.10 cputime=290.375 memavail=1628784 print_time=6590.015 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.2 pwm=0.352
Stats 6580.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3842750 bytes_read=2104837 bytes_retransmit=9 bytes_invalid=0 send_seq=112407 receive_seq=112407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=1052414 sysload=0.10 cputime=290.444 memavail=1628540 print_time=6591.369 buffer_time=2.517 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 6581.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3843481 bytes_read=2105279 bytes_retransmit=9 bytes_invalid=0 send_seq=112432 receive_seq=112432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.069 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=1052475 sysload=0.10 cputime=290.506 memavail=1628264 print_time=6592.008 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
TMC 'stepper_z' reports DRV_STATUS: 40120000 cs_actual=18 stealth=1
Stats 6582.1: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3844467 bytes_read=2105726 bytes_retransmit=9 bytes_invalid=0 send_seq=112459 receive_seq=112459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1052627 sysload=0.10 cputime=290.575 memavail=1628248 print_time=6593.305 buffer_time=2.452 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 6583.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3845410 bytes_read=2106158 bytes_retransmit=9 bytes_invalid=0 send_seq=112485 receive_seq=112485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.494 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1052813 sysload=0.10 cputime=290.641 memavail=1628280 print_time=6594.291 buffer_time=2.438 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6584.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3846347 bytes_read=2106605 bytes_retransmit=9 bytes_invalid=0 send_seq=112511 receive_seq=112511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=1052964 sysload=0.09 cputime=290.709 memavail=1628272 print_time=6595.204 buffer_time=2.351 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 6585.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3847332 bytes_read=2107051 bytes_retransmit=9 bytes_invalid=0 send_seq=112540 receive_seq=112540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=1053119 sysload=0.09 cputime=290.771 memavail=1628784 print_time=6596.080 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 6586.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3848252 bytes_read=2107478 bytes_retransmit=9 bytes_invalid=0 send_seq=112568 receive_seq=112568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=55.5 mcu_temp: temp=43.3 sd_pos=1053242 sysload=0.09 cputime=290.836 memavail=1628548 print_time=6596.921 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.2 pwm=0.302
Stats 6587.1: gcodein=0 mcu: mcu_awake=0.013 mcu_task_avg=0.000020 mcu_task_stddev=0.000050 bytes_write=3849585 bytes_read=2107970 bytes_retransmit=9 bytes_invalid=0 send_seq=112603 receive_seq=112603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=1053462 sysload=0.09 cputime=290.903 memavail=1628872 print_time=6598.023 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 6588.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3850873 bytes_read=2108441 bytes_retransmit=9 bytes_invalid=0 send_seq=112634 receive_seq=112634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1053643 sysload=0.09 cputime=290.950 memavail=1628608 print_time=6598.877 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 6589.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3852447 bytes_read=2108908 bytes_retransmit=9 bytes_invalid=0 send_seq=112670 receive_seq=112670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=54.5 mcu_temp: temp=43.1 sd_pos=1054011 sysload=0.08 cputime=291.020 memavail=1628336 print_time=6600.089 buffer_time=2.232 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 6590.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3853960 bytes_read=2109400 bytes_retransmit=9 bytes_invalid=0 send_seq=112705 receive_seq=112705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1054313 sysload=0.08 cputime=291.086 memavail=1628100 print_time=6601.133 buffer_time=2.275 print_stall=0 extruder: target=215 temp=214.8 pwm=0.535
Stats 6591.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3856240 bytes_read=2109951 bytes_retransmit=9 bytes_invalid=0 send_seq=112755 receive_seq=112755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=56.5 mcu_temp: temp=44.2 sd_pos=1054838 sysload=0.08 cputime=291.156 memavail=1627848 print_time=6601.987 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.9 pwm=0.447
Stats 6592.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3859274 bytes_read=2110543 bytes_retransmit=9 bytes_invalid=0 send_seq=112816 receive_seq=112816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1056078 sysload=0.08 cputime=291.243 memavail=1627536 print_time=6603.191 buffer_time=2.333 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 6593.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=3860216 bytes_read=2111010 bytes_retransmit=9 bytes_invalid=0 send_seq=112843 receive_seq=112843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1056256 sysload=0.08 cputime=291.304 memavail=1627484 print_time=6604.322 buffer_time=2.462 print_stall=0 extruder: target=215 temp=214.6 pwm=0.622
Stats 6594.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=3860948 bytes_read=2111441 bytes_retransmit=9 bytes_invalid=0 send_seq=112869 receive_seq=112869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=1056376 sysload=0.08 cputime=291.370 memavail=1627224 print_time=6604.913 buffer_time=2.053 print_stall=0 extruder: target=215 temp=214.8 pwm=0.486
Stats 6595.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=3861889 bytes_read=2111853 bytes_retransmit=9 bytes_invalid=0 send_seq=112894 receive_seq=112894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.312 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=1056555 sysload=0.08 cputime=291.420 memavail=1627988 print_time=6606.108 buffer_time=2.247 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 6596.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=3862802 bytes_read=2112310 bytes_retransmit=9 bytes_invalid=0 send_seq=112922 receive_seq=112922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.4 sd_pos=1056703 sysload=0.08 cputime=291.488 memavail=1628252 print_time=6607.308 buffer_time=2.446 print_stall=0 extruder: target=215 temp=214.9 pwm=0.427
Stats 6597.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=3863545 bytes_read=2112736 bytes_retransmit=9 bytes_invalid=0 send_seq=112947 receive_seq=112947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1056785 sysload=0.08 cputime=291.548 memavail=1627928 print_time=6607.928 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 6598.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3864505 bytes_read=2113163 bytes_retransmit=9 bytes_invalid=0 send_seq=112972 receive_seq=112972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.322 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1056940 sysload=0.08 cputime=291.610 memavail=1627920 print_time=6609.221 buffer_time=2.357 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 6599.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3866694 bytes_read=2113725 bytes_retransmit=9 bytes_invalid=0 send_seq=113021 receive_seq=113021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=1057483 sysload=0.07 cputime=291.682 memavail=1627928 print_time=6610.079 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.9 pwm=0.441
Stats 6600.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3868704 bytes_read=2114246 bytes_retransmit=9 bytes_invalid=0 send_seq=113065 receive_seq=113065 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1057900 sysload=0.07 cputime=291.752 memavail=1627692 print_time=6611.084 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.0 pwm=0.412
Stats 6601.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3869544 bytes_read=2114658 bytes_retransmit=9 bytes_invalid=0 send_seq=113090 receive_seq=113090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.5 sd_pos=1058019 sysload=0.07 cputime=291.811 memavail=1627928 print_time=6612.043 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 6602.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000056 bytes_write=3870457 bytes_read=2115105 bytes_retransmit=9 bytes_invalid=0 send_seq=113116 receive_seq=113116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1058139 sysload=0.07 cputime=291.872 memavail=1627916 print_time=6612.967 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6603.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=3871610 bytes_read=2115541 bytes_retransmit=9 bytes_invalid=0 send_seq=113144 receive_seq=113140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.074 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=1058344 sysload=0.07 cputime=291.932 memavail=1627672 print_time=6614.304 buffer_time=2.438 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6604.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=3872578 bytes_read=2115973 bytes_retransmit=9 bytes_invalid=0 send_seq=113169 receive_seq=113169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=55.0 mcu_temp: temp=43.8 sd_pos=1058463 sysload=0.06 cputime=291.992 memavail=1627920 print_time=6615.151 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 6605.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=3873491 bytes_read=2116429 bytes_retransmit=9 bytes_invalid=0 send_seq=113194 receive_seq=113194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1058579 sysload=0.06 cputime=292.052 memavail=1627672 print_time=6615.960 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.2 pwm=0.431
Stats 6606.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=3874746 bytes_read=2116866 bytes_retransmit=9 bytes_invalid=0 send_seq=113224 receive_seq=113224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1058818 sysload=0.06 cputime=292.111 memavail=1627432 print_time=6617.096 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 6607.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=3876010 bytes_read=2117308 bytes_retransmit=9 bytes_invalid=0 send_seq=113255 receive_seq=113255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.316 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1059055 sysload=0.06 cputime=292.171 memavail=1627680 print_time=6618.113 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.1 pwm=0.495
Stats 6608.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3877262 bytes_read=2117804 bytes_retransmit=9 bytes_invalid=0 send_seq=113285 receive_seq=113285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1059292 sysload=0.06 cputime=292.232 memavail=1627912 print_time=6619.039 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.1 pwm=0.495
Stats 6609.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3878796 bytes_read=2118261 bytes_retransmit=9 bytes_invalid=0 send_seq=113319 receive_seq=113319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=56.5 mcu_temp: temp=43.4 sd_pos=1059530 sysload=0.06 cputime=292.298 memavail=1627732 print_time=6620.138 buffer_time=2.268 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 6610.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3880218 bytes_read=2118713 bytes_retransmit=9 bytes_invalid=0 send_seq=113352 receive_seq=113352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.024 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=1059796 sysload=0.06 cputime=292.356 memavail=1627740 print_time=6620.922 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 6611.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3883683 bytes_read=2119384 bytes_retransmit=9 bytes_invalid=0 send_seq=113420 receive_seq=113420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.154 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1061671 sysload=0.06 cputime=292.443 memavail=1627484 print_time=6622.216 buffer_time=2.345 print_stall=0 extruder: target=215 temp=215.2 pwm=0.442
Stats 6612.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=3885751 bytes_read=2119880 bytes_retransmit=9 bytes_invalid=0 send_seq=113463 receive_seq=113463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.611 rpi: temp=54.5 mcu_temp: temp=43.2 sd_pos=1062333 sysload=0.06 cputime=292.510 memavail=1627652 print_time=6622.878 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.499
Stats 6613.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000042 bytes_write=3888172 bytes_read=2120417 bytes_retransmit=9 bytes_invalid=0 send_seq=113512 receive_seq=113512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=55.0 mcu_temp: temp=43.2 sd_pos=1062898 sysload=0.06 cputime=292.582 memavail=1627736 print_time=6623.913 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.1 pwm=0.499
Stats 6614.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000042 bytes_write=3890947 bytes_read=2121020 bytes_retransmit=9 bytes_invalid=0 send_seq=113569 receive_seq=113569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=55.5 mcu_temp: temp=43.7 sd_pos=1064209 sysload=0.05 cputime=292.666 memavail=1627492 print_time=6625.135 buffer_time=2.262 print_stall=0 extruder: target=215 temp=215.2 pwm=0.408
Stats 6615.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000042 bytes_write=3893797 bytes_read=2121577 bytes_retransmit=9 bytes_invalid=0 send_seq=113625 receive_seq=113625 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1065828 sysload=0.05 cputime=292.741 memavail=1627424 print_time=6626.082 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.1 pwm=0.508
Stats 6616.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000042 bytes_write=3896750 bytes_read=2122149 bytes_retransmit=9 bytes_invalid=0 send_seq=113682 receive_seq=113682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.060 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=1066521 sysload=0.05 cputime=292.810 memavail=1627456 print_time=6627.306 buffer_time=2.432 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6617.1: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000042 bytes_write=3898547 bytes_read=2122680 bytes_retransmit=9 bytes_invalid=0 send_seq=113722 receive_seq=113722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=1068696 sysload=0.05 cputime=292.905 memavail=1627456 print_time=6628.132 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 6618.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000045 bytes_write=3901028 bytes_read=2123238 bytes_retransmit=9 bytes_invalid=0 send_seq=113773 receive_seq=113773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.441 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1071144 sysload=0.05 cputime=292.996 memavail=1627708 print_time=6629.085 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.2 pwm=0.450
Stats 6619.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000045 bytes_write=3904405 bytes_read=2123855 bytes_retransmit=9 bytes_invalid=0 send_seq=113839 receive_seq=113839 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=1072941 sysload=0.13 cputime=293.086 memavail=1627196 print_time=6630.398 buffer_time=2.522 print_stall=0 extruder: target=215 temp=215.1 pwm=0.506
Stats 6620.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000045 bytes_write=3905832 bytes_read=2124356 bytes_retransmit=9 bytes_invalid=0 send_seq=113873 receive_seq=113873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.682 rpi: temp=55.0 mcu_temp: temp=43.8 sd_pos=1073650 sysload=0.13 cputime=293.156 memavail=1627148 print_time=6630.992 buffer_time=2.115 print_stall=0 extruder: target=215 temp=215.1 pwm=0.391
Stats 6621.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000045 bytes_write=3907771 bytes_read=2124848 bytes_retransmit=9 bytes_invalid=0 send_seq=113914 receive_seq=113914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=1074876 sysload=0.13 cputime=293.229 memavail=1627400 print_time=6631.937 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 6622.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000045 bytes_write=3909784 bytes_read=2125360 bytes_retransmit=9 bytes_invalid=0 send_seq=113956 receive_seq=113956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1076119 sysload=0.13 cputime=293.305 memavail=1627600 print_time=6633.069 buffer_time=2.190 print_stall=0 extruder: target=215 temp=215.0 pwm=0.467
Stats 6623.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=3910411 bytes_read=2125787 bytes_retransmit=9 bytes_invalid=0 send_seq=113975 receive_seq=113975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.440 rpi: temp=55.0 mcu_temp: temp=43.4 sd_pos=1076382 sysload=0.13 cputime=293.365 memavail=1627884 print_time=6633.906 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 6624.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=3912144 bytes_read=2126269 bytes_retransmit=9 bytes_invalid=0 send_seq=114014 receive_seq=114014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.079 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1077573 sysload=0.20 cputime=293.442 memavail=1627816 print_time=6634.933 buffer_time=2.054 print_stall=0 extruder: target=215 temp=215.0 pwm=0.444
Stats 6625.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=3914683 bytes_read=2126821 bytes_retransmit=9 bytes_invalid=0 send_seq=114064 receive_seq=114064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=55.5 mcu_temp: temp=43.4 sd_pos=1079998 sysload=0.20 cputime=293.510 memavail=1628356 print_time=6636.029 buffer_time=2.149 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 6626.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=3917054 bytes_read=2127377 bytes_retransmit=9 bytes_invalid=0 send_seq=114112 receive_seq=114112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.082 rpi: temp=54.5 mcu_temp: temp=43.9 sd_pos=1082109 sysload=0.20 cputime=293.600 memavail=1628356 print_time=6637.182 buffer_time=2.301 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 6627.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=3918522 bytes_read=2127819 bytes_retransmit=9 bytes_invalid=0 send_seq=114143 receive_seq=114143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1083457 sysload=0.20 cputime=293.677 memavail=1628068 print_time=6637.961 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 6628.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3919791 bytes_read=2128276 bytes_retransmit=9 bytes_invalid=0 send_seq=114171 receive_seq=114171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1084665 sysload=0.20 cputime=293.753 memavail=1628080 print_time=6639.045 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 6629.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3920514 bytes_read=2128697 bytes_retransmit=9 bytes_invalid=0 send_seq=114192 receive_seq=114192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=55.1 pwm=0.104 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1085004 sysload=0.26 cputime=293.815 memavail=1628088 print_time=6640.104 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 6630.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3922767 bytes_read=2129214 bytes_retransmit=9 bytes_invalid=0 send_seq=114238 receive_seq=114238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.138 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=1086261 sysload=0.26 cputime=293.896 memavail=1628144 print_time=6641.037 buffer_time=2.154 print_stall=0 extruder: target=215 temp=215.1 pwm=0.398
Stats 6631.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3924817 bytes_read=2129726 bytes_retransmit=9 bytes_invalid=0 send_seq=114280 receive_seq=114280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1087631 sysload=0.26 cputime=293.977 memavail=1627868 print_time=6642.038 buffer_time=2.154 print_stall=0 extruder: target=215 temp=215.0 pwm=0.532
Stats 6632.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=3927061 bytes_read=2130272 bytes_retransmit=9 bytes_invalid=0 send_seq=114326 receive_seq=114326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1089864 sysload=0.26 cputime=294.071 memavail=1627856 print_time=6643.103 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6633.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=3928236 bytes_read=2130714 bytes_retransmit=9 bytes_invalid=0 send_seq=114354 receive_seq=114354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.416 rpi: temp=55.0 mcu_temp: temp=43.7 sd_pos=1091443 sysload=0.26 cputime=294.149 memavail=1627864 print_time=6643.897 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.1 pwm=0.477
Stats 6634.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=3929276 bytes_read=2131146 bytes_retransmit=9 bytes_invalid=0 send_seq=114380 receive_seq=114380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1091938 sysload=0.32 cputime=294.215 memavail=1627856 print_time=6644.986 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.1 pwm=0.407
Stats 6635.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=3930473 bytes_read=2131612 bytes_retransmit=9 bytes_invalid=0 send_seq=114410 receive_seq=114410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=56.0 mcu_temp: temp=43.6 sd_pos=1092740 sysload=0.32 cputime=294.259 memavail=1628124 print_time=6646.022 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 6636.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=3932685 bytes_read=2132124 bytes_retransmit=9 bytes_invalid=0 send_seq=114455 receive_seq=114455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1095111 sysload=0.32 cputime=294.347 memavail=1627876 print_time=6647.076 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 6637.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=3934658 bytes_read=2132636 bytes_retransmit=9 bytes_invalid=0 send_seq=114497 receive_seq=114497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.645 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=1096855 sysload=0.32 cputime=294.430 memavail=1627868 print_time=6647.920 buffer_time=2.031 print_stall=0 extruder: target=215 temp=214.9 pwm=0.560
Stats 6638.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=3937123 bytes_read=2133217 bytes_retransmit=9 bytes_invalid=0 send_seq=114547 receive_seq=114547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.412 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1100114 sysload=0.32 cputime=294.537 memavail=1628364 print_time=6648.967 buffer_time=2.077 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 6639.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=3939468 bytes_read=2133744 bytes_retransmit=9 bytes_invalid=0 send_seq=114595 receive_seq=114595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1102387 sysload=0.38 cputime=294.624 memavail=1628128 print_time=6650.006 buffer_time=2.115 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 6640.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=3940385 bytes_read=2134161 bytes_retransmit=9 bytes_invalid=0 send_seq=114618 receive_seq=114618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1102690 sysload=0.38 cputime=294.680 memavail=1628120 print_time=6650.950 buffer_time=2.058 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 6641.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=3941623 bytes_read=2134637 bytes_retransmit=9 bytes_invalid=0 send_seq=114650 receive_seq=114650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=55.0 mcu_temp: temp=43.8 sd_pos=1103697 sysload=0.38 cputime=294.751 memavail=1627844 print_time=6652.080 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 6642.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=3943925 bytes_read=2135159 bytes_retransmit=9 bytes_invalid=0 send_seq=114697 receive_seq=114697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1106639 sysload=0.38 cputime=294.851 memavail=1627704 print_time=6653.073 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 6643.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=3946083 bytes_read=2135696 bytes_retransmit=9 bytes_invalid=0 send_seq=114741 receive_seq=114741 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=1108077 sysload=0.38 cputime=294.929 memavail=1627704 print_time=6654.171 buffer_time=2.277 print_stall=0 extruder: target=215 temp=214.7 pwm=0.541
Stats 6644.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=3948690 bytes_read=2136293 bytes_retransmit=9 bytes_invalid=0 send_seq=114795 receive_seq=114795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1109368 sysload=0.51 cputime=295.008 memavail=1627696 print_time=6655.162 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 6645.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=3950451 bytes_read=2136785 bytes_retransmit=9 bytes_invalid=0 send_seq=114836 receive_seq=114836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1110268 sysload=0.51 cputime=295.083 memavail=1627328 print_time=6655.909 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.0 pwm=0.362
Stats 6646.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=3952729 bytes_read=2137317 bytes_retransmit=9 bytes_invalid=0 send_seq=114882 receive_seq=114882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.362 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1113475 sysload=0.51 cputime=295.186 memavail=1627852 print_time=6657.043 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.7 pwm=0.546
Stats 6647.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=3954903 bytes_read=2137863 bytes_retransmit=9 bytes_invalid=0 send_seq=114928 receive_seq=114928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.347 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1115718 sysload=0.51 cputime=295.278 memavail=1628132 print_time=6658.050 buffer_time=2.153 print_stall=0 extruder: target=215 temp=214.8 pwm=0.498
Stats 6648.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=3956921 bytes_read=2138381 bytes_retransmit=9 bytes_invalid=0 send_seq=114971 receive_seq=114971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.573 rpi: temp=55.0 mcu_temp: temp=43.7 sd_pos=1117667 sysload=0.51 cputime=295.341 memavail=1627276 print_time=6658.914 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.0 pwm=0.390
Stats 6649.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=3959422 bytes_read=2138933 bytes_retransmit=9 bytes_invalid=0 send_seq=115021 receive_seq=115021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.032 rpi: temp=54.5 mcu_temp: temp=44.2 sd_pos=1119716 sysload=0.63 cputime=295.406 memavail=1627276 print_time=6660.015 buffer_time=2.117 print_stall=0 extruder: target=215 temp=214.9 pwm=0.443
Stats 6650.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=3961316 bytes_read=2139449 bytes_retransmit=9 bytes_invalid=0 send_seq=115061 receive_seq=115061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.444 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=1122188 sysload=0.63 cputime=295.497 memavail=1627276 print_time=6661.052 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.9 pwm=0.443
Stats 6651.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=3963310 bytes_read=2139946 bytes_retransmit=9 bytes_invalid=0 send_seq=115103 receive_seq=115103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.358 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1123745 sysload=0.63 cputime=295.578 memavail=1627276 print_time=6661.906 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 6652.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=3965969 bytes_read=2140524 bytes_retransmit=9 bytes_invalid=0 send_seq=115155 receive_seq=115155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.090 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1125871 sysload=0.63 cputime=295.674 memavail=1627780 print_time=6663.190 buffer_time=2.290 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 6653.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=3967344 bytes_read=2141000 bytes_retransmit=9 bytes_invalid=0 send_seq=115187 receive_seq=115187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=1127076 sysload=0.63 cputime=295.750 memavail=1627276 print_time=6663.958 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 6654.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=3969136 bytes_read=2141487 bytes_retransmit=9 bytes_invalid=0 send_seq=115227 receive_seq=115227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.016 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1128870 sysload=0.66 cputime=295.834 memavail=1627528 print_time=6664.944 buffer_time=2.042 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 6655.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=3970752 bytes_read=2141969 bytes_retransmit=9 bytes_invalid=0 send_seq=115263 receive_seq=115263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1130600 sysload=0.66 cputime=295.895 memavail=1627288 print_time=6665.962 buffer_time=2.058 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 6656.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=3973355 bytes_read=2142555 bytes_retransmit=9 bytes_invalid=0 send_seq=115317 receive_seq=115317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1133021 sysload=0.66 cputime=295.992 memavail=1627232 print_time=6667.032 buffer_time=2.128 print_stall=0 extruder: target=215 temp=215.2 pwm=0.314
Stats 6657.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=3975242 bytes_read=2143047 bytes_retransmit=9 bytes_invalid=0 send_seq=115358 receive_seq=115358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1136047 sysload=0.66 cputime=296.090 memavail=1626964 print_time=6668.068 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.0 pwm=0.450
Stats 6658.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3977036 bytes_read=2143540 bytes_retransmit=9 bytes_invalid=0 send_seq=115393 receive_seq=115393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.427 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1137943 sysload=0.66 cputime=296.180 memavail=1627232 print_time=6669.078 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.1 pwm=0.399
Stats 6659.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3977652 bytes_read=2143956 bytes_retransmit=9 bytes_invalid=0 send_seq=115413 receive_seq=115413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.068 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1138173 sysload=0.69 cputime=296.241 memavail=1627480 print_time=6670.146 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.1 pwm=0.399
Stats 6660.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3978128 bytes_read=2144328 bytes_retransmit=9 bytes_invalid=0 send_seq=115430 receive_seq=115430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1138313 sysload=0.69 cputime=296.296 memavail=1627488 print_time=6670.928 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 6661.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3978728 bytes_read=2144730 bytes_retransmit=9 bytes_invalid=0 send_seq=115450 receive_seq=115450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.450 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1138572 sysload=0.69 cputime=296.359 memavail=1627488 print_time=6672.106 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 6662.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=3979331 bytes_read=2145141 bytes_retransmit=9 bytes_invalid=0 send_seq=115469 receive_seq=115469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.432 rpi: temp=55.5 mcu_temp: temp=43.5 sd_pos=1138806 sysload=0.69 cputime=296.420 memavail=1627496 print_time=6673.173 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 6663.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3979865 bytes_read=2145538 bytes_retransmit=9 bytes_invalid=0 send_seq=115488 receive_seq=115488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1138951 sysload=0.69 cputime=296.478 memavail=1627496 print_time=6673.956 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 6664.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3981329 bytes_read=2146025 bytes_retransmit=9 bytes_invalid=0 send_seq=115522 receive_seq=115522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1140230 sysload=0.79 cputime=296.550 memavail=1627744 print_time=6675.146 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 6665.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3983491 bytes_read=2146546 bytes_retransmit=9 bytes_invalid=0 send_seq=115566 receive_seq=115566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.087 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1141370 sysload=0.79 cputime=296.603 memavail=1628260 print_time=6676.262 buffer_time=2.353 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 6666.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3984337 bytes_read=2146953 bytes_retransmit=9 bytes_invalid=0 send_seq=115590 receive_seq=115590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1141486 sysload=0.79 cputime=296.659 memavail=1628248 print_time=6677.371 buffer_time=2.461 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 6667.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=3985024 bytes_read=2147370 bytes_retransmit=9 bytes_invalid=0 send_seq=115610 receive_seq=115610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1141572 sysload=0.79 cputime=296.718 memavail=1628312 print_time=6677.974 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 6668.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3985913 bytes_read=2147801 bytes_retransmit=9 bytes_invalid=0 send_seq=115633 receive_seq=115633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1141717 sysload=0.79 cputime=296.776 memavail=1627840 print_time=6679.138 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6669.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3986722 bytes_read=2148193 bytes_retransmit=9 bytes_invalid=0 send_seq=115654 receive_seq=115654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=55.0 mcu_temp: temp=43.9 sd_pos=1141833 sysload=0.81 cputime=296.832 memavail=1627820 print_time=6680.293 buffer_time=2.380 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6670.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3987680 bytes_read=2148635 bytes_retransmit=9 bytes_invalid=0 send_seq=115679 receive_seq=115679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=54.5 mcu_temp: temp=44.4 sd_pos=1141949 sysload=0.81 cputime=296.889 memavail=1628072 print_time=6681.456 buffer_time=2.542 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 6671.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3988358 bytes_read=2149050 bytes_retransmit=9 bytes_invalid=0 send_seq=115702 receive_seq=115702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1142009 sysload=0.81 cputime=296.945 memavail=1627820 print_time=6682.023 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 6672.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=3989362 bytes_read=2149461 bytes_retransmit=9 bytes_invalid=0 send_seq=115729 receive_seq=115729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=55.0 mcu_temp: temp=44.1 sd_pos=1142160 sysload=0.81 cputime=297.005 memavail=1628072 print_time=6683.146 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 6673.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=3990274 bytes_read=2149906 bytes_retransmit=9 bytes_invalid=0 send_seq=115754 receive_seq=115754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.065 rpi: temp=55.0 mcu_temp: temp=43.9 sd_pos=1142278 sysload=0.81 cputime=297.062 memavail=1627904 print_time=6684.113 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 6674.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=3991106 bytes_read=2150316 bytes_retransmit=9 bytes_invalid=0 send_seq=115778 receive_seq=115778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.318 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1142398 sysload=0.90 cputime=297.119 memavail=1627880 print_time=6685.040 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 6675.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=3992313 bytes_read=2150741 bytes_retransmit=9 bytes_invalid=0 send_seq=115807 receive_seq=115807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.8 pwm=0.873 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1142634 sysload=0.90 cputime=297.162 memavail=1627844 print_time=6686.348 buffer_time=2.430 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 6676.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=3993180 bytes_read=2151178 bytes_retransmit=9 bytes_invalid=0 send_seq=115831 receive_seq=115831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1142752 sysload=0.90 cputime=297.222 memavail=1627916 print_time=6687.095 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 6677.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000059 bytes_write=3994384 bytes_read=2151619 bytes_retransmit=9 bytes_invalid=0 send_seq=115859 receive_seq=115859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=43.6 sd_pos=1142957 sysload=0.90 cputime=297.281 memavail=1627884 print_time=6688.128 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.0 pwm=0.437
Stats 6678.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3995615 bytes_read=2152071 bytes_retransmit=9 bytes_invalid=0 send_seq=115889 receive_seq=115889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.023 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1143166 sysload=0.90 cputime=297.344 memavail=1627944 print_time=6689.033 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.2 pwm=0.338
Stats 6679.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3997184 bytes_read=2152563 bytes_retransmit=9 bytes_invalid=0 send_seq=115924 receive_seq=115924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1143492 sysload=1.07 cputime=297.406 memavail=1627944 print_time=6690.187 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 6680.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3998438 bytes_read=2153014 bytes_retransmit=9 bytes_invalid=0 send_seq=115954 receive_seq=115954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1143728 sysload=1.07 cputime=297.466 memavail=1628204 print_time=6691.239 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 6681.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=3999663 bytes_read=2153446 bytes_retransmit=9 bytes_invalid=0 send_seq=115983 receive_seq=115983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.644 rpi: temp=55.0 mcu_temp: temp=43.8 sd_pos=1143965 sysload=1.07 cputime=297.505 memavail=1628452 print_time=6691.998 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.1 pwm=0.411
Stats 6682.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4003302 bytes_read=2154108 bytes_retransmit=9 bytes_invalid=0 send_seq=116052 receive_seq=116052 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=1145614 sysload=1.07 cputime=297.588 memavail=1628452 print_time=6693.247 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.2 pwm=0.428
Stats 6683.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=4004224 bytes_read=2154549 bytes_retransmit=9 bytes_invalid=0 send_seq=116077 receive_seq=116077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1145768 sysload=1.07 cputime=297.644 memavail=1628208 print_time=6694.426 buffer_time=2.501 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 6684.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=4004973 bytes_read=2154951 bytes_retransmit=9 bytes_invalid=0 send_seq=116100 receive_seq=116100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1145866 sysload=0.99 cputime=297.701 memavail=1628196 print_time=6694.943 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 6685.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=4006267 bytes_read=2155423 bytes_retransmit=9 bytes_invalid=0 send_seq=116131 receive_seq=116131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.003 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1146055 sysload=0.99 cputime=297.744 memavail=1628196 print_time=6695.966 buffer_time=2.041 print_stall=0 extruder: target=215 temp=215.2 pwm=0.350
Stats 6686.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=4007254 bytes_read=2155854 bytes_retransmit=9 bytes_invalid=0 send_seq=116157 receive_seq=116157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=44.1 sd_pos=1146206 sysload=0.99 cputime=297.804 memavail=1628192 print_time=6697.243 buffer_time=2.318 print_stall=0 extruder: target=215 temp=215.1 pwm=0.504
Stats 6687.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000044 bytes_write=4008143 bytes_read=2156271 bytes_retransmit=9 bytes_invalid=0 send_seq=116183 receive_seq=116183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1146360 sysload=0.99 cputime=297.864 memavail=1628228 print_time=6698.503 buffer_time=2.577 print_stall=0 extruder: target=215 temp=215.2 pwm=0.376
Stats 6688.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4008791 bytes_read=2156703 bytes_retransmit=9 bytes_invalid=0 send_seq=116203 receive_seq=116203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=54.9 pwm=0.589 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1146453 sysload=0.99 cputime=297.919 memavail=1627892 print_time=6699.115 buffer_time=2.188 print_stall=0 extruder: target=215 temp=215.0 pwm=0.522
Stats 6689.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4009765 bytes_read=2157139 bytes_retransmit=9 bytes_invalid=0 send_seq=116230 receive_seq=116230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.340 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1146638 sysload=1.15 cputime=297.979 memavail=1628144 print_time=6700.282 buffer_time=2.355 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 6690.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4010869 bytes_read=2157581 bytes_retransmit=9 bytes_invalid=0 send_seq=116261 receive_seq=116261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.215 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1146798 sysload=1.15 cputime=298.039 memavail=1628148 print_time=6701.456 buffer_time=2.528 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 6691.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4011807 bytes_read=2158023 bytes_retransmit=9 bytes_invalid=0 send_seq=116286 receive_seq=116286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1146950 sysload=1.15 cputime=298.098 memavail=1628460 print_time=6702.381 buffer_time=2.452 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 6692.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4012803 bytes_read=2158464 bytes_retransmit=9 bytes_invalid=0 send_seq=116314 receive_seq=116314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.331 rpi: temp=55.0 mcu_temp: temp=44.1 sd_pos=1147135 sysload=1.15 cputime=298.156 memavail=1628972 print_time=6703.378 buffer_time=2.449 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 6693.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4013748 bytes_read=2158901 bytes_retransmit=9 bytes_invalid=0 send_seq=116341 receive_seq=116341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.071 rpi: temp=54.5 mcu_temp: temp=44.0 sd_pos=1147287 sysload=1.15 cputime=298.213 memavail=1628968 print_time=6704.344 buffer_time=2.413 print_stall=0 extruder: target=215 temp=214.8 pwm=0.603
Stats 6694.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4014701 bytes_read=2159343 bytes_retransmit=9 bytes_invalid=0 send_seq=116366 receive_seq=116366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1147442 sysload=1.14 cputime=298.272 memavail=1628452 print_time=6705.277 buffer_time=2.346 print_stall=0 extruder: target=215 temp=214.9 pwm=0.433
Stats 6695.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4015624 bytes_read=2159774 bytes_retransmit=9 bytes_invalid=0 send_seq=116392 receive_seq=116392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.400 rpi: temp=55.0 mcu_temp: temp=44.4 sd_pos=1147597 sysload=1.14 cputime=298.311 memavail=1627468 print_time=6706.102 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.0 pwm=0.409
Stats 6696.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4016862 bytes_read=2160211 bytes_retransmit=9 bytes_invalid=0 send_seq=116422 receive_seq=116422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1147812 sysload=1.14 cputime=298.371 memavail=1627468 print_time=6707.275 buffer_time=2.343 print_stall=0 extruder: target=215 temp=214.8 pwm=0.540
Stats 6697.2: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4017851 bytes_read=2160658 bytes_retransmit=9 bytes_invalid=0 send_seq=116448 receive_seq=116448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1147967 sysload=1.14 cputime=298.430 memavail=1627156 print_time=6708.029 buffer_time=2.097 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 6698.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4019201 bytes_read=2161129 bytes_retransmit=9 bytes_invalid=0 send_seq=116479 receive_seq=116479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=44.3 sd_pos=1148246 sysload=1.14 cputime=298.493 memavail=1627468 print_time=6709.224 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.9 pwm=0.418
Stats 6699.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4020155 bytes_read=2161541 bytes_retransmit=9 bytes_invalid=0 send_seq=116504 receive_seq=116504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1148369 sysload=1.04 cputime=298.551 memavail=1627720 print_time=6710.123 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.8 pwm=0.492
Stats 6700.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4021343 bytes_read=2162003 bytes_retransmit=9 bytes_invalid=0 send_seq=116533 receive_seq=116533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.171 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1148583 sysload=1.04 cputime=298.594 memavail=1628224 print_time=6711.235 buffer_time=2.301 print_stall=0 extruder: target=215 temp=214.8 pwm=0.492
Stats 6701.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4022702 bytes_read=2162464 bytes_retransmit=9 bytes_invalid=0 send_seq=116565 receive_seq=116565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=57.0 mcu_temp: temp=44.1 sd_pos=1148829 sysload=1.04 cputime=298.634 memavail=1628228 print_time=6712.058 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.7 pwm=0.518
Stats 6702.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4025045 bytes_read=2162986 bytes_retransmit=9 bytes_invalid=0 send_seq=116612 receive_seq=116612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1149843 sysload=1.04 cputime=298.713 memavail=1628444 print_time=6713.024 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.448
Stats 6703.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=4027801 bytes_read=2163613 bytes_retransmit=9 bytes_invalid=0 send_seq=116671 receive_seq=116671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.686 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1151013 sysload=1.04 cputime=298.792 memavail=1628260 print_time=6714.299 buffer_time=2.364 print_stall=0 extruder: target=215 temp=214.7 pwm=0.516
Stats 6704.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=4029861 bytes_read=2164139 bytes_retransmit=9 bytes_invalid=0 send_seq=116716 receive_seq=116716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=55.0 mcu_temp: temp=44.2 sd_pos=1151426 sysload=0.96 cputime=298.834 memavail=1628452 print_time=6715.171 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.9 pwm=0.413
Stats 6705.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=4032120 bytes_read=2164682 bytes_retransmit=9 bytes_invalid=0 send_seq=116765 receive_seq=116765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=55.0 mcu_temp: temp=44.3 sd_pos=1152290 sysload=0.96 cputime=298.884 memavail=1628312 print_time=6715.980 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.8 pwm=0.466
Stats 6706.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=4035153 bytes_read=2165304 bytes_retransmit=9 bytes_invalid=0 send_seq=116826 receive_seq=116826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.309 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1153906 sysload=0.96 cputime=298.969 memavail=1628296 print_time=6716.978 buffer_time=2.041 print_stall=0 extruder: target=215 temp=214.9 pwm=0.446
Stats 6707.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=4037960 bytes_read=2165885 bytes_retransmit=9 bytes_invalid=0 send_seq=116882 receive_seq=116882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1154862 sysload=0.96 cputime=299.047 memavail=1628536 print_time=6718.289 buffer_time=2.352 print_stall=0 extruder: target=215 temp=214.8 pwm=0.526
Stats 6708.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4039835 bytes_read=2166388 bytes_retransmit=9 bytes_invalid=0 send_seq=116922 receive_seq=116922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1157094 sysload=0.96 cputime=299.100 memavail=1628500 print_time=6719.117 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 6709.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4042191 bytes_read=2166955 bytes_retransmit=9 bytes_invalid=0 send_seq=116972 receive_seq=116972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.108 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1159455 sysload=0.88 cputime=299.160 memavail=1628516 print_time=6720.048 buffer_time=2.110 print_stall=0 extruder: target=215 temp=215.0 pwm=0.427
Stats 6710.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4045579 bytes_read=2167586 bytes_retransmit=9 bytes_invalid=0 send_seq=117038 receive_seq=117038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1161257 sysload=0.88 cputime=299.247 memavail=1628484 print_time=6721.361 buffer_time=2.422 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 6711.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4046978 bytes_read=2168043 bytes_retransmit=9 bytes_invalid=0 send_seq=117072 receive_seq=117072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=1161966 sysload=0.88 cputime=299.318 memavail=1628500 print_time=6721.955 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 6712.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4049636 bytes_read=2168635 bytes_retransmit=9 bytes_invalid=0 send_seq=117127 receive_seq=117127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.131 rpi: temp=55.0 mcu_temp: temp=44.3 sd_pos=1163688 sysload=0.88 cputime=299.405 memavail=1628232 print_time=6723.221 buffer_time=2.280 print_stall=0 extruder: target=215 temp=215.0 pwm=0.502
Stats 6713.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4050952 bytes_read=2169107 bytes_retransmit=9 bytes_invalid=0 send_seq=117158 receive_seq=117158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=55.0 mcu_temp: temp=44.3 sd_pos=1164368 sysload=0.88 cputime=299.448 memavail=1627960 print_time=6724.016 buffer_time=2.075 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 6714.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4051703 bytes_read=2169504 bytes_retransmit=9 bytes_invalid=0 send_seq=117180 receive_seq=117180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1164630 sysload=0.81 cputime=299.509 memavail=1628248 print_time=6725.081 buffer_time=2.139 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 6715.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4053525 bytes_read=2170026 bytes_retransmit=9 bytes_invalid=0 send_seq=117221 receive_seq=117221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1166317 sysload=0.81 cputime=299.591 memavail=1628200 print_time=6726.047 buffer_time=2.104 print_stall=0 extruder: target=215 temp=214.8 pwm=0.590
Stats 6716.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4056388 bytes_read=2170617 bytes_retransmit=9 bytes_invalid=0 send_seq=117279 receive_seq=117279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.015 rpi: temp=55.0 mcu_temp: temp=44.0 sd_pos=1168588 sysload=0.81 cputime=299.685 memavail=1628164 print_time=6727.125 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 6717.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4058901 bytes_read=2171154 bytes_retransmit=9 bytes_invalid=0 send_seq=117329 receive_seq=117329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=55.0 mcu_temp: temp=44.3 sd_pos=1170488 sysload=0.81 cputime=299.778 memavail=1628384 print_time=6728.287 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 6718.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=4060300 bytes_read=2171667 bytes_retransmit=9 bytes_invalid=0 send_seq=117365 receive_seq=117365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.186 rpi: temp=54.5 mcu_temp: temp=44.4 sd_pos=1172129 sysload=0.81 cputime=299.829 memavail=1628068 print_time=6729.069 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 6719.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=4061359 bytes_read=2172108 bytes_retransmit=9 bytes_invalid=0 send_seq=117393 receive_seq=117393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1172811 sysload=0.75 cputime=299.895 memavail=1628392 print_time=6730.186 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 6720.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=4062441 bytes_read=2172535 bytes_retransmit=9 bytes_invalid=0 send_seq=117421 receive_seq=117421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.568 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1173440 sysload=0.75 cputime=299.962 memavail=1628380 print_time=6731.264 buffer_time=2.319 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 6721.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=4064538 bytes_read=2173082 bytes_retransmit=9 bytes_invalid=0 send_seq=117467 receive_seq=117467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1174718 sysload=0.75 cputime=300.040 memavail=1628372 print_time=6732.244 buffer_time=2.298 print_stall=0 extruder: target=215 temp=215.2 pwm=0.396
Stats 6722.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=4066596 bytes_read=2173608 bytes_retransmit=9 bytes_invalid=0 send_seq=117512 receive_seq=117512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=44.1 sd_pos=1176300 sysload=0.75 cputime=300.123 memavail=1628392 print_time=6733.179 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 6723.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4068303 bytes_read=2174100 bytes_retransmit=9 bytes_invalid=0 send_seq=117550 receive_seq=117550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1177807 sysload=0.75 cputime=300.201 memavail=1628468 print_time=6733.957 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 6724.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4069946 bytes_read=2174607 bytes_retransmit=9 bytes_invalid=0 send_seq=117588 receive_seq=117588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=54.5 mcu_temp: temp=44.6 sd_pos=1179622 sysload=0.77 cputime=300.283 memavail=1628468 print_time=6735.190 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 6725.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4070581 bytes_read=2175003 bytes_retransmit=9 bytes_invalid=0 send_seq=117607 receive_seq=117607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1179884 sysload=0.77 cputime=300.327 memavail=1629184 print_time=6736.286 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 6726.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4071787 bytes_read=2175450 bytes_retransmit=9 bytes_invalid=0 send_seq=117639 receive_seq=117639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1180895 sysload=0.77 cputime=300.395 memavail=1629244 print_time=6737.016 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 6727.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4073998 bytes_read=2175997 bytes_retransmit=9 bytes_invalid=0 send_seq=117685 receive_seq=117685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1183341 sysload=0.77 cputime=300.488 memavail=1629480 print_time=6738.083 buffer_time=2.132 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 6728.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4076538 bytes_read=2176563 bytes_retransmit=9 bytes_invalid=0 send_seq=117735 receive_seq=117735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.034 rpi: temp=55.5 mcu_temp: temp=44.7 sd_pos=1186080 sysload=0.77 cputime=300.589 memavail=1628968 print_time=6739.170 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 6729.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4078329 bytes_read=2177045 bytes_retransmit=9 bytes_invalid=0 send_seq=117774 receive_seq=117774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1188093 sysload=0.71 cputime=300.681 memavail=1628268 print_time=6739.960 buffer_time=2.008 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 6730.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4080745 bytes_read=2177627 bytes_retransmit=9 bytes_invalid=0 send_seq=117827 receive_seq=117827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.143 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1190092 sysload=0.71 cputime=300.739 memavail=1628016 print_time=6740.977 buffer_time=2.024 print_stall=0 extruder: target=215 temp=214.8 pwm=0.610
Stats 6731.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4081487 bytes_read=2178038 bytes_retransmit=9 bytes_invalid=0 send_seq=117850 receive_seq=117850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1190363 sysload=0.71 cputime=300.803 memavail=1628020 print_time=6742.072 buffer_time=2.119 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 6732.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4083100 bytes_read=2178495 bytes_retransmit=9 bytes_invalid=0 send_seq=117886 receive_seq=117886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1191769 sysload=0.71 cputime=300.879 memavail=1628288 print_time=6743.084 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.0 pwm=0.393
Stats 6733.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4085264 bytes_read=2179040 bytes_retransmit=9 bytes_invalid=0 send_seq=117931 receive_seq=117931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1194298 sysload=0.71 cputime=300.972 memavail=1628540 print_time=6744.172 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.0 pwm=0.429
Stats 6734.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4087360 bytes_read=2179550 bytes_retransmit=9 bytes_invalid=0 send_seq=117975 receive_seq=117975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.417 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1195745 sysload=0.65 cputime=301.059 memavail=1628592 print_time=6744.991 buffer_time=2.033 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 6735.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4090048 bytes_read=2180103 bytes_retransmit=9 bytes_invalid=0 send_seq=118029 receive_seq=118029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1197088 sysload=0.65 cputime=301.138 memavail=1627832 print_time=6746.223 buffer_time=2.265 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 6736.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4092092 bytes_read=2180630 bytes_retransmit=9 bytes_invalid=0 send_seq=118071 receive_seq=118071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1198914 sysload=0.65 cputime=301.220 memavail=1627828 print_time=6747.031 buffer_time=2.072 print_stall=0 extruder: target=215 temp=214.9 pwm=0.445
Stats 6737.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4093962 bytes_read=2181131 bytes_retransmit=9 bytes_invalid=0 send_seq=118111 receive_seq=118111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.463 rpi: temp=55.5 mcu_temp: temp=44.7 sd_pos=1201757 sysload=0.65 cputime=301.285 memavail=1627544 print_time=6748.073 buffer_time=2.114 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 6738.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4096839 bytes_read=2181714 bytes_retransmit=9 bytes_invalid=0 send_seq=118167 receive_seq=118167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.516 rpi: temp=57.0 mcu_temp: temp=44.5 sd_pos=1204456 sysload=0.65 cputime=301.380 memavail=1627796 print_time=6749.133 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.0 pwm=0.399
Stats 6739.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4099491 bytes_read=2182301 bytes_retransmit=9 bytes_invalid=0 send_seq=118221 receive_seq=118221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.142 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1206723 sysload=0.60 cputime=301.474 memavail=1628108 print_time=6750.483 buffer_time=2.522 print_stall=0 extruder: target=215 temp=214.9 pwm=0.478
Stats 6740.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4100632 bytes_read=2182742 bytes_retransmit=9 bytes_invalid=0 send_seq=118249 receive_seq=118249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1207889 sysload=0.60 cputime=301.548 memavail=1628360 print_time=6750.995 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.420
Stats 6741.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4103279 bytes_read=2183299 bytes_retransmit=9 bytes_invalid=0 send_seq=118303 receive_seq=118303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=43.8 sd_pos=1210348 sysload=0.60 cputime=301.646 memavail=1628060 print_time=6752.122 buffer_time=2.159 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 6742.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4105147 bytes_read=2183816 bytes_retransmit=9 bytes_invalid=0 send_seq=118343 receive_seq=118343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.521 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1212288 sysload=0.60 cputime=301.732 memavail=1627808 print_time=6753.143 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.0 pwm=0.411
Stats 6743.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=4107454 bytes_read=2184368 bytes_retransmit=9 bytes_invalid=0 send_seq=118390 receive_seq=118390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.427 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1213988 sysload=0.60 cputime=301.821 memavail=1627800 print_time=6754.165 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.401
Stats 6744.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=4109289 bytes_read=2184850 bytes_retransmit=9 bytes_invalid=0 send_seq=118429 receive_seq=118429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1215812 sysload=0.55 cputime=301.910 memavail=1627556 print_time=6755.355 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.1 pwm=0.338
Stats 6745.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=4110680 bytes_read=2185332 bytes_retransmit=9 bytes_invalid=0 send_seq=118462 receive_seq=118462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=54.5 mcu_temp: temp=44.2 sd_pos=1217427 sysload=0.55 cputime=301.958 memavail=1627068 print_time=6756.198 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 6746.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=4112289 bytes_read=2185808 bytes_retransmit=9 bytes_invalid=0 send_seq=118497 receive_seq=118497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1219007 sysload=0.55 cputime=302.037 memavail=1626804 print_time=6756.984 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 6747.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=4114850 bytes_read=2186350 bytes_retransmit=9 bytes_invalid=0 send_seq=118548 receive_seq=118548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1221495 sysload=0.55 cputime=302.136 memavail=1626532 print_time=6758.055 buffer_time=2.089 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 6748.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4116821 bytes_read=2186887 bytes_retransmit=9 bytes_invalid=0 send_seq=118589 receive_seq=118589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1224874 sysload=0.55 cputime=302.236 memavail=1626560 print_time=6759.063 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.1 pwm=0.369
Stats 6749.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4117980 bytes_read=2187323 bytes_retransmit=9 bytes_invalid=0 send_seq=118616 receive_seq=118616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.186 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1225368 sysload=0.75 cputime=302.302 memavail=1626580 print_time=6760.197 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 6750.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4118544 bytes_read=2187705 bytes_retransmit=9 bytes_invalid=0 send_seq=118635 receive_seq=118635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.094 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1225534 sysload=0.75 cputime=302.363 memavail=1626860 print_time=6761.197 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 6751.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4119191 bytes_read=2188141 bytes_retransmit=9 bytes_invalid=0 send_seq=118656 receive_seq=118656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1225706 sysload=0.75 cputime=302.424 memavail=1627080 print_time=6762.197 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.2 pwm=0.407
Stats 6752.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4119687 bytes_read=2188513 bytes_retransmit=9 bytes_invalid=0 send_seq=118673 receive_seq=118673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.532 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1225878 sysload=0.75 cputime=302.480 memavail=1627356 print_time=6763.197 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.2 pwm=0.407
Stats 6753.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4120258 bytes_read=2188910 bytes_retransmit=9 bytes_invalid=0 send_seq=118692 receive_seq=118692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1226050 sysload=0.75 cputime=302.539 memavail=1627580 print_time=6764.196 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.2 pwm=0.466
Stats 6754.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4121377 bytes_read=2189391 bytes_retransmit=9 bytes_invalid=0 send_seq=118722 receive_seq=118722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.115 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1226790 sysload=0.85 cputime=302.584 memavail=1628084 print_time=6765.504 buffer_time=2.533 print_stall=0 extruder: target=215 temp=215.4 pwm=0.308
Stats 6755.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4123698 bytes_read=2189908 bytes_retransmit=9 bytes_invalid=0 send_seq=118768 receive_seq=118768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1228603 sysload=0.85 cputime=302.635 memavail=1627624 print_time=6766.323 buffer_time=2.351 print_stall=0 extruder: target=215 temp=215.2 pwm=0.503
Stats 6756.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4125225 bytes_read=2190365 bytes_retransmit=9 bytes_invalid=0 send_seq=118802 receive_seq=118802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.017 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1229392 sysload=0.85 cputime=302.700 memavail=1627144 print_time=6767.321 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.3 pwm=0.387
Stats 6757.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4126109 bytes_read=2190826 bytes_retransmit=9 bytes_invalid=0 send_seq=118828 receive_seq=118828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.218 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1229567 sysload=0.85 cputime=302.758 memavail=1627288 print_time=6768.577 buffer_time=2.604 print_stall=0 extruder: target=215 temp=215.2 pwm=0.456
Stats 6758.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4126719 bytes_read=2191218 bytes_retransmit=9 bytes_invalid=0 send_seq=118846 receive_seq=118846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.094 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1229657 sysload=0.85 cputime=302.796 memavail=1626792 print_time=6769.233 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.2 pwm=0.456
Stats 6759.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4127674 bytes_read=2191625 bytes_retransmit=9 bytes_invalid=0 send_seq=118870 receive_seq=118870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.564 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1229782 sysload=0.78 cputime=302.854 memavail=1626748 print_time=6770.556 buffer_time=2.583 print_stall=0 extruder: target=215 temp=215.1 pwm=0.495
Stats 6760.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4128352 bytes_read=2192056 bytes_retransmit=9 bytes_invalid=0 send_seq=118890 receive_seq=118890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.072 rpi: temp=57.0 mcu_temp: temp=44.3 sd_pos=1229871 sysload=0.78 cputime=302.910 memavail=1627096 print_time=6771.258 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.1 pwm=0.502
Stats 6761.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4129246 bytes_read=2192463 bytes_retransmit=9 bytes_invalid=0 send_seq=118914 receive_seq=118914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1230023 sysload=0.78 cputime=302.970 memavail=1626800 print_time=6772.522 buffer_time=2.547 print_stall=0 extruder: target=215 temp=215.0 pwm=0.518
Stats 6762.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=4130557 bytes_read=2192905 bytes_retransmit=9 bytes_invalid=0 send_seq=118945 receive_seq=118945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.259 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1230361 sysload=0.78 cputime=303.032 memavail=1626800 print_time=6773.408 buffer_time=2.432 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 6763.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4133301 bytes_read=2193526 bytes_retransmit=9 bytes_invalid=0 send_seq=119000 receive_seq=119000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=44.3 sd_pos=1231123 sysload=0.78 cputime=303.101 memavail=1626560 print_time=6774.160 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.9 pwm=0.473
Stats 6764.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4135695 bytes_read=2194053 bytes_retransmit=9 bytes_invalid=0 send_seq=119048 receive_seq=119048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.045 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1231661 sysload=0.72 cputime=303.170 memavail=1626316 print_time=6775.169 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 6765.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4138203 bytes_read=2194600 bytes_retransmit=9 bytes_invalid=0 send_seq=119097 receive_seq=119097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.428 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1232752 sysload=0.72 cputime=303.222 memavail=1626492 print_time=6776.043 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.9 pwm=0.473
Stats 6766.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4140151 bytes_read=2195142 bytes_retransmit=9 bytes_invalid=0 send_seq=119140 receive_seq=119140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1233197 sysload=0.72 cputime=303.287 memavail=1626240 print_time=6777.000 buffer_time=2.022 print_stall=0 extruder: target=215 temp=214.9 pwm=0.425
Stats 6767.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4141358 bytes_read=2195569 bytes_retransmit=9 bytes_invalid=0 send_seq=119168 receive_seq=119168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=44.6 sd_pos=1233404 sysload=0.72 cputime=303.349 memavail=1626508 print_time=6778.372 buffer_time=2.393 print_stall=0 extruder: target=215 temp=214.8 pwm=0.533
Stats 6768.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4142279 bytes_read=2196012 bytes_retransmit=9 bytes_invalid=0 send_seq=119193 receive_seq=119193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1233523 sysload=0.72 cputime=303.410 memavail=1626460 print_time=6779.246 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.8 pwm=0.506
Stats 6769.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4143186 bytes_read=2196448 bytes_retransmit=9 bytes_invalid=0 send_seq=119217 receive_seq=119217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.622 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1233699 sysload=0.66 cputime=303.467 memavail=1626460 print_time=6780.111 buffer_time=2.131 print_stall=0 extruder: target=215 temp=214.8 pwm=0.513
Stats 6770.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4144418 bytes_read=2196880 bytes_retransmit=9 bytes_invalid=0 send_seq=119246 receive_seq=119246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1233909 sysload=0.66 cputime=303.528 memavail=1626720 print_time=6781.296 buffer_time=2.315 print_stall=0 extruder: target=215 temp=214.8 pwm=0.460
Stats 6771.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4145347 bytes_read=2197312 bytes_retransmit=9 bytes_invalid=0 send_seq=119272 receive_seq=119272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.028 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1234058 sysload=0.66 cputime=303.585 memavail=1626468 print_time=6782.060 buffer_time=2.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.450
Stats 6772.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4146632 bytes_read=2197783 bytes_retransmit=9 bytes_invalid=0 send_seq=119303 receive_seq=119303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1234295 sysload=0.66 cputime=303.646 memavail=1626460 print_time=6783.102 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.0 pwm=0.406
Stats 6773.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4147829 bytes_read=2198230 bytes_retransmit=9 bytes_invalid=0 send_seq=119332 receive_seq=119332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=55.0 mcu_temp: temp=44.8 sd_pos=1234503 sysload=0.66 cputime=303.704 memavail=1626476 print_time=6784.006 buffer_time=2.023 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 6774.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4149725 bytes_read=2198742 bytes_retransmit=9 bytes_invalid=0 send_seq=119374 receive_seq=119374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1234886 sysload=0.61 cputime=303.769 memavail=1626752 print_time=6785.411 buffer_time=2.426 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 6775.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4151209 bytes_read=2199223 bytes_retransmit=9 bytes_invalid=0 send_seq=119407 receive_seq=119407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1235121 sysload=0.61 cputime=303.809 memavail=1626500 print_time=6786.180 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6776.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4154009 bytes_read=2199785 bytes_retransmit=9 bytes_invalid=0 send_seq=119462 receive_seq=119462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.100 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1236909 sysload=0.61 cputime=303.897 memavail=1626768 print_time=6787.128 buffer_time=2.142 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 6777.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4155111 bytes_read=2200227 bytes_retransmit=9 bytes_invalid=0 send_seq=119490 receive_seq=119490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1237192 sysload=0.61 cputime=303.957 memavail=1626792 print_time=6788.501 buffer_time=2.514 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 6778.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4155890 bytes_read=2200678 bytes_retransmit=9 bytes_invalid=0 send_seq=119514 receive_seq=119514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.409 rpi: temp=55.5 mcu_temp: temp=44.5 sd_pos=1237253 sysload=0.61 cputime=304.013 memavail=1626792 print_time=6789.056 buffer_time=2.069 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 6779.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4156827 bytes_read=2201090 bytes_retransmit=9 bytes_invalid=0 send_seq=119539 receive_seq=119539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.459 rpi: temp=57.0 mcu_temp: temp=44.3 sd_pos=1237407 sysload=0.56 cputime=304.072 memavail=1627068 print_time=6790.078 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 6780.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4158288 bytes_read=2201567 bytes_retransmit=9 bytes_invalid=0 send_seq=119574 receive_seq=119574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.264 rpi: temp=56.0 mcu_temp: temp=44.7 sd_pos=1237601 sysload=0.56 cputime=304.136 memavail=1627296 print_time=6791.452 buffer_time=2.465 print_stall=0 extruder: target=215 temp=215.2 pwm=0.362
Stats 6781.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4159164 bytes_read=2202013 bytes_retransmit=9 bytes_invalid=0 send_seq=119600 receive_seq=119600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1237756 sysload=0.56 cputime=304.195 memavail=1627260 print_time=6792.381 buffer_time=2.393 print_stall=0 extruder: target=215 temp=215.1 pwm=0.506
Stats 6782.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=4160087 bytes_read=2202420 bytes_retransmit=9 bytes_invalid=0 send_seq=119624 receive_seq=119624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=54.9 pwm=0.665 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1237880 sysload=0.56 cputime=304.251 memavail=1627024 print_time=6793.253 buffer_time=2.264 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6783.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4160993 bytes_read=2202862 bytes_retransmit=9 bytes_invalid=0 send_seq=119649 receive_seq=119649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.485 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1238032 sysload=0.56 cputime=304.308 memavail=1627020 print_time=6794.089 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.2 pwm=0.433
Stats 6784.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4162342 bytes_read=2203343 bytes_retransmit=9 bytes_invalid=0 send_seq=119682 receive_seq=119682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1238222 sysload=0.51 cputime=304.347 memavail=1626988 print_time=6795.287 buffer_time=2.296 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 6785.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4163623 bytes_read=2203790 bytes_retransmit=9 bytes_invalid=0 send_seq=119714 receive_seq=119714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1238469 sysload=0.51 cputime=304.390 memavail=1626872 print_time=6796.182 buffer_time=2.190 print_stall=0 extruder: target=215 temp=214.9 pwm=0.577
Stats 6786.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4164976 bytes_read=2204247 bytes_retransmit=9 bytes_invalid=0 send_seq=119745 receive_seq=119745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1238746 sysload=0.51 cputime=304.449 memavail=1627124 print_time=6797.016 buffer_time=2.024 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 6787.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000050 bytes_write=4166807 bytes_read=2204758 bytes_retransmit=9 bytes_invalid=0 send_seq=119784 receive_seq=119784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.499 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1239142 sysload=0.51 cputime=304.513 memavail=1627132 print_time=6798.402 buffer_time=2.409 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 6788.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4168871 bytes_read=2205285 bytes_retransmit=9 bytes_invalid=0 send_seq=119829 receive_seq=119829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1239546 sysload=0.51 cputime=304.577 memavail=1627384 print_time=6799.345 buffer_time=2.351 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 6789.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4172177 bytes_read=2205907 bytes_retransmit=9 bytes_invalid=0 send_seq=119893 receive_seq=119893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.148 rpi: temp=56.0 mcu_temp: temp=44.8 sd_pos=1241219 sysload=0.55 cputime=304.656 memavail=1627132 print_time=6800.189 buffer_time=2.195 print_stall=0 extruder: target=215 temp=214.7 pwm=0.614
Stats 6790.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4173205 bytes_read=2206353 bytes_retransmit=9 bytes_invalid=0 send_seq=119919 receive_seq=119919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1241401 sysload=0.55 cputime=304.696 memavail=1626600 print_time=6801.196 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.6 pwm=0.588
Stats 6791.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4174231 bytes_read=2206770 bytes_retransmit=9 bytes_invalid=0 send_seq=119947 receive_seq=119947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=44.4 sd_pos=1241580 sysload=0.55 cputime=304.754 memavail=1626608 print_time=6802.283 buffer_time=2.288 print_stall=0 extruder: target=215 temp=214.7 pwm=0.518
Stats 6792.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=4175170 bytes_read=2207190 bytes_retransmit=9 bytes_invalid=0 send_seq=119973 receive_seq=119973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=56.5 mcu_temp: temp=44.6 sd_pos=1241729 sysload=0.55 cputime=304.795 memavail=1626612 print_time=6803.426 buffer_time=2.430 print_stall=0 extruder: target=215 temp=214.7 pwm=0.493
Stats 6793.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4175778 bytes_read=2207609 bytes_retransmit=9 bytes_invalid=0 send_seq=119993 receive_seq=119993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=56.5 mcu_temp: temp=44.2 sd_pos=1241789 sysload=0.55 cputime=304.848 memavail=1626360 print_time=6804.004 buffer_time=2.007 print_stall=0 extruder: target=215 temp=214.9 pwm=0.411
Stats 6794.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4176806 bytes_read=2208026 bytes_retransmit=9 bytes_invalid=0 send_seq=120021 receive_seq=120021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.116 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1241962 sysload=0.51 cputime=304.907 memavail=1626360 print_time=6805.209 buffer_time=2.212 print_stall=0 extruder: target=215 temp=214.8 pwm=0.444
Stats 6795.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4178951 bytes_read=2208558 bytes_retransmit=9 bytes_invalid=0 send_seq=120067 receive_seq=120067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=56.0 mcu_temp: temp=44.6 sd_pos=1242909 sysload=0.51 cputime=304.956 memavail=1626352 print_time=6806.960 buffer_time=2.962 print_stall=0 extruder: target=215 temp=215.0 pwm=0.362
Stats 6796.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4181130 bytes_read=2209109 bytes_retransmit=9 bytes_invalid=0 send_seq=120114 receive_seq=120114 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1244232 sysload=0.51 cputime=305.034 memavail=1626392 print_time=6807.587 buffer_time=2.589 print_stall=0 extruder: target=215 temp=214.7 pwm=0.614
Stats 6797.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4183170 bytes_read=2209616 bytes_retransmit=9 bytes_invalid=0 send_seq=120158 receive_seq=120158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1245123 sysload=0.51 cputime=305.104 memavail=1626292 print_time=6808.439 buffer_time=2.441 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 6798.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4185157 bytes_read=2210108 bytes_retransmit=9 bytes_invalid=0 send_seq=120201 receive_seq=120193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1247356 sysload=0.51 cputime=305.196 memavail=1626292 print_time=6809.267 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.1 pwm=0.377
Stats 6799.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4187530 bytes_read=2210704 bytes_retransmit=9 bytes_invalid=0 send_seq=120249 receive_seq=120249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.419 rpi: temp=56.5 mcu_temp: temp=44.6 sd_pos=1249718 sysload=0.47 cputime=305.285 memavail=1626576 print_time=6810.198 buffer_time=2.197 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 6800.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4191154 bytes_read=2211346 bytes_retransmit=9 bytes_invalid=0 send_seq=120320 receive_seq=120320 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=56.5 mcu_temp: temp=44.2 sd_pos=1251516 sysload=0.47 cputime=305.373 memavail=1626732 print_time=6811.511 buffer_time=2.508 print_stall=0 extruder: target=215 temp=215.2 pwm=0.380
Stats 6801.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4192571 bytes_read=2211813 bytes_retransmit=9 bytes_invalid=0 send_seq=120353 receive_seq=120353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1252225 sysload=0.47 cputime=305.437 memavail=1627052 print_time=6812.105 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 6802.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4194482 bytes_read=2212334 bytes_retransmit=9 bytes_invalid=0 send_seq=120394 receive_seq=120394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1253447 sysload=0.47 cputime=305.510 memavail=1627124 print_time=6813.050 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.3 pwm=0.354
Stats 6803.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=4196565 bytes_read=2212857 bytes_retransmit=9 bytes_invalid=0 send_seq=120438 receive_seq=120438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=1254632 sysload=0.47 cputime=305.586 memavail=1627384 print_time=6814.150 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.1 pwm=0.533
Stats 6804.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=4197289 bytes_read=2213269 bytes_retransmit=9 bytes_invalid=0 send_seq=120460 receive_seq=120460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.151 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1254958 sysload=0.43 cputime=305.650 memavail=1627528 print_time=6815.203 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 6805.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=4199169 bytes_read=2213785 bytes_retransmit=9 bytes_invalid=0 send_seq=120500 receive_seq=120500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1256646 sysload=0.43 cputime=305.707 memavail=1627372 print_time=6816.158 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.2 pwm=0.426
Stats 6806.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=4201785 bytes_read=2214347 bytes_retransmit=9 bytes_invalid=0 send_seq=120555 receive_seq=120555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=57.0 mcu_temp: temp=44.1 sd_pos=1258912 sysload=0.43 cputime=305.803 memavail=1627620 print_time=6817.235 buffer_time=2.230 print_stall=0 extruder: target=215 temp=215.1 pwm=0.512
Stats 6807.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=4203507 bytes_read=2214829 bytes_retransmit=9 bytes_invalid=0 send_seq=120591 receive_seq=120591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=1260314 sysload=0.43 cputime=305.883 memavail=1627616 print_time=6818.035 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.2 pwm=0.432
Stats 6808.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4205689 bytes_read=2215385 bytes_retransmit=9 bytes_invalid=0 send_seq=120636 receive_seq=120636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1262455 sysload=0.43 cputime=305.973 memavail=1627380 print_time=6819.180 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 6809.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4206688 bytes_read=2215797 bytes_retransmit=9 bytes_invalid=0 send_seq=120661 receive_seq=120661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.230 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1263112 sysload=0.39 cputime=306.038 memavail=1627696 print_time=6820.273 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 6810.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4207689 bytes_read=2216254 bytes_retransmit=9 bytes_invalid=0 send_seq=120689 receive_seq=120689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.239 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1263804 sysload=0.39 cputime=306.112 memavail=1627440 print_time=6821.337 buffer_time=2.328 print_stall=0 extruder: target=215 temp=214.9 pwm=0.558
Stats 6811.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4209782 bytes_read=2216725 bytes_retransmit=9 bytes_invalid=0 send_seq=120733 receive_seq=120723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1265022 sysload=0.39 cputime=306.186 memavail=1627692 print_time=6822.312 buffer_time=2.301 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 6812.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4211398 bytes_read=2217252 bytes_retransmit=9 bytes_invalid=0 send_seq=120771 receive_seq=120771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1266171 sysload=0.39 cputime=306.260 memavail=1627432 print_time=6823.018 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 6813.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4213463 bytes_read=2217799 bytes_retransmit=9 bytes_invalid=0 send_seq=120814 receive_seq=120814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.122 rpi: temp=54.5 mcu_temp: temp=44.5 sd_pos=1268194 sysload=0.39 cputime=306.346 memavail=1627188 print_time=6824.071 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6814.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4214939 bytes_read=2218265 bytes_retransmit=9 bytes_invalid=0 send_seq=120847 receive_seq=120847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.491 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1269768 sysload=0.36 cputime=306.425 memavail=1626884 print_time=6825.066 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 6815.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4215676 bytes_read=2218662 bytes_retransmit=9 bytes_invalid=0 send_seq=120869 receive_seq=120869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=1270091 sysload=0.36 cputime=306.486 memavail=1626628 print_time=6826.150 buffer_time=2.137 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 6816.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4217167 bytes_read=2219154 bytes_retransmit=9 bytes_invalid=0 send_seq=120904 receive_seq=120904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=55.0 mcu_temp: temp=44.5 sd_pos=1271612 sysload=0.36 cputime=306.571 memavail=1626628 print_time=6827.132 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 6817.3: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4219674 bytes_read=2219705 bytes_retransmit=9 bytes_invalid=0 send_seq=120954 receive_seq=120954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1274011 sysload=0.36 cputime=306.664 memavail=1626636 print_time=6828.263 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 6818.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4221585 bytes_read=2220212 bytes_retransmit=9 bytes_invalid=0 send_seq=120995 receive_seq=120995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=57.0 mcu_temp: temp=44.1 sd_pos=1276158 sysload=0.36 cputime=306.754 memavail=1626636 print_time=6829.053 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 6819.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4223985 bytes_read=2220774 bytes_retransmit=9 bytes_invalid=0 send_seq=121044 receive_seq=121044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.417 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=1278992 sysload=0.33 cputime=306.854 memavail=1626324 print_time=6830.132 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.0 pwm=0.428
Stats 6820.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4225909 bytes_read=2221275 bytes_retransmit=9 bytes_invalid=0 send_seq=121084 receive_seq=121084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.312 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=1280375 sysload=0.33 cputime=306.930 memavail=1626576 print_time=6831.143 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 6821.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4226674 bytes_read=2221677 bytes_retransmit=9 bytes_invalid=0 send_seq=121107 receive_seq=121107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=57.0 mcu_temp: temp=44.0 sd_pos=1280710 sysload=0.33 cputime=306.992 memavail=1626576 print_time=6832.227 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 6822.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4228708 bytes_read=2222209 bytes_retransmit=9 bytes_invalid=0 send_seq=121150 receive_seq=121150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1282884 sysload=0.33 cputime=307.085 memavail=1626608 print_time=6833.222 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.1 pwm=0.463
Stats 6823.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4230338 bytes_read=2222710 bytes_retransmit=9 bytes_invalid=0 send_seq=121187 receive_seq=121187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.509 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=1284500 sysload=0.33 cputime=307.168 memavail=1626328 print_time=6834.031 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 6824.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4233016 bytes_read=2223272 bytes_retransmit=9 bytes_invalid=0 send_seq=121242 receive_seq=121242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.5 sd_pos=1286128 sysload=0.39 cputime=307.252 memavail=1626072 print_time=6835.218 buffer_time=2.200 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 6825.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4235875 bytes_read=2223864 bytes_retransmit=9 bytes_invalid=0 send_seq=121297 receive_seq=121297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=55.5 mcu_temp: temp=44.5 sd_pos=1287503 sysload=0.39 cputime=307.334 memavail=1626044 print_time=6836.375 buffer_time=2.357 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 6826.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4237334 bytes_read=2224325 bytes_retransmit=9 bytes_invalid=0 send_seq=121329 receive_seq=121329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1289691 sysload=0.39 cputime=307.417 memavail=1626296 print_time=6837.140 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 6827.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4240496 bytes_read=2224928 bytes_retransmit=9 bytes_invalid=0 send_seq=121390 receive_seq=121390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1292878 sysload=0.39 cputime=307.522 memavail=1626548 print_time=6838.439 buffer_time=2.420 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 6828.3: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000061 bytes_write=4242236 bytes_read=2225471 bytes_retransmit=9 bytes_invalid=0 send_seq=121432 receive_seq=121432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.012 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1294658 sysload=0.39 cputime=307.602 memavail=1626800 print_time=6839.243 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.424
Stats 6829.3: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000061 bytes_write=4245349 bytes_read=2226077 bytes_retransmit=9 bytes_invalid=0 send_seq=121493 receive_seq=121493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.121 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1296746 sysload=0.35 cputime=307.695 memavail=1627304 print_time=6840.461 buffer_time=2.440 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 6830.3: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000061 bytes_write=4246867 bytes_read=2226544 bytes_retransmit=9 bytes_invalid=0 send_seq=121529 receive_seq=121529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.426 rpi: temp=56.5 mcu_temp: temp=44.2 sd_pos=1298398 sysload=0.35 cputime=307.778 memavail=1627616 print_time=6841.253 buffer_time=2.233 print_stall=0 extruder: target=215 temp=214.8 pwm=0.538
Stats 6831.3: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000061 bytes_write=4249043 bytes_read=2227096 bytes_retransmit=9 bytes_invalid=0 send_seq=121576 receive_seq=121576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1300447 sysload=0.35 cputime=307.866 memavail=1627604 print_time=6842.165 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 6832.3: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000061 bytes_write=4251865 bytes_read=2227682 bytes_retransmit=9 bytes_invalid=0 send_seq=121633 receive_seq=121633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=57.0 mcu_temp: temp=44.2 sd_pos=1302930 sysload=0.35 cputime=307.961 memavail=1627316 print_time=6843.521 buffer_time=2.499 print_stall=0 extruder: target=215 temp=215.0 pwm=0.391
Stats 6833.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4253163 bytes_read=2228135 bytes_retransmit=9 bytes_invalid=0 send_seq=121663 receive_seq=121663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1303878 sysload=0.35 cputime=308.034 memavail=1627376 print_time=6844.044 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 6834.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4254927 bytes_read=2228642 bytes_retransmit=9 bytes_invalid=0 send_seq=121701 receive_seq=121701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1305929 sysload=0.33 cputime=308.125 memavail=1627348 print_time=6845.241 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 6835.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4256373 bytes_read=2229118 bytes_retransmit=9 bytes_invalid=0 send_seq=121736 receive_seq=121736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=55.5 mcu_temp: temp=44.6 sd_pos=1307356 sysload=0.33 cputime=308.204 memavail=1626812 print_time=6846.066 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 6836.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4258725 bytes_read=2229645 bytes_retransmit=9 bytes_invalid=0 send_seq=121784 receive_seq=121784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1310015 sysload=0.33 cputime=308.309 memavail=1626852 print_time=6847.248 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 6837.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=4260902 bytes_read=2230192 bytes_retransmit=9 bytes_invalid=0 send_seq=121830 receive_seq=121830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1312519 sysload=0.33 cputime=308.408 memavail=1626872 print_time=6848.200 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.2 pwm=0.354
Stats 6838.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4263237 bytes_read=2230748 bytes_retransmit=9 bytes_invalid=0 send_seq=121878 receive_seq=121878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1316011 sysload=0.33 cputime=308.521 memavail=1626644 print_time=6849.362 buffer_time=2.337 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 6839.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4264191 bytes_read=2231160 bytes_retransmit=9 bytes_invalid=0 send_seq=121903 receive_seq=121903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1316287 sysload=0.30 cputime=308.561 memavail=1626564 print_time=6850.071 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.1 pwm=0.498
Stats 6840.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4264726 bytes_read=2231572 bytes_retransmit=9 bytes_invalid=0 send_seq=121922 receive_seq=121922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=56.0 mcu_temp: temp=44.7 sd_pos=1316492 sysload=0.30 cputime=308.602 memavail=1626504 print_time=6851.060 buffer_time=2.033 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 6841.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4265355 bytes_read=2231978 bytes_retransmit=9 bytes_invalid=0 send_seq=121943 receive_seq=121943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.044 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1316700 sysload=0.30 cputime=308.661 memavail=1626504 print_time=6852.049 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 6842.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4265887 bytes_read=2232355 bytes_retransmit=9 bytes_invalid=0 send_seq=121961 receive_seq=121961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.393 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1316940 sysload=0.30 cputime=308.721 memavail=1626532 print_time=6853.039 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.2 pwm=0.410
Stats 6843.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4266516 bytes_read=2232782 bytes_retransmit=9 bytes_invalid=0 send_seq=121981 receive_seq=121980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1317243 sysload=0.30 cputime=308.768 memavail=1626832 print_time=6854.498 buffer_time=2.468 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 6844.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4267756 bytes_read=2233188 bytes_retransmit=9 bytes_invalid=0 send_seq=122010 receive_seq=122001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.634 rpi: temp=57.0 mcu_temp: temp=44.4 sd_pos=1318322 sysload=0.28 cputime=308.836 memavail=1627084 print_time=6855.681 buffer_time=2.651 print_stall=0 extruder: target=215 temp=215.2 pwm=0.411
Stats 6845.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4269683 bytes_read=2233730 bytes_retransmit=9 bytes_invalid=0 send_seq=122052 receive_seq=122052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1319251 sysload=0.28 cputime=308.883 memavail=1627028 print_time=6856.297 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.1 pwm=0.490
Stats 6846.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4271880 bytes_read=2234282 bytes_retransmit=9 bytes_invalid=0 send_seq=122099 receive_seq=122099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1320527 sysload=0.28 cputime=308.959 memavail=1626776 print_time=6857.527 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.1 pwm=0.514
Stats 6847.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4272778 bytes_read=2234703 bytes_retransmit=9 bytes_invalid=0 send_seq=122123 receive_seq=122123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=55.5 mcu_temp: temp=44.5 sd_pos=1320705 sysload=0.28 cputime=308.999 memavail=1627028 print_time=6858.527 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 6848.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4273345 bytes_read=2235110 bytes_retransmit=9 bytes_invalid=0 send_seq=122144 receive_seq=122144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1320763 sysload=0.28 cputime=309.052 memavail=1626768 print_time=6859.055 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.1 pwm=0.497
Stats 6849.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4274280 bytes_read=2235552 bytes_retransmit=9 bytes_invalid=0 send_seq=122169 receive_seq=122169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1320910 sysload=0.25 cputime=309.110 memavail=1626592 print_time=6860.178 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.2 pwm=0.367
Stats 6850.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4275177 bytes_read=2235970 bytes_retransmit=9 bytes_invalid=0 send_seq=122193 receive_seq=122193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=56.5 mcu_temp: temp=44.6 sd_pos=1321028 sysload=0.25 cputime=309.169 memavail=1626828 print_time=6861.308 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.2 pwm=0.463
Stats 6851.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4276131 bytes_read=2236377 bytes_retransmit=9 bytes_invalid=0 send_seq=122219 receive_seq=122219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=56.5 mcu_temp: temp=44.7 sd_pos=1321146 sysload=0.25 cputime=309.231 memavail=1626824 print_time=6862.437 buffer_time=2.404 print_stall=0 extruder: target=215 temp=215.1 pwm=0.406
Stats 6852.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4276947 bytes_read=2236792 bytes_retransmit=9 bytes_invalid=0 send_seq=122241 receive_seq=122241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=56.0 mcu_temp: temp=44.6 sd_pos=1321296 sysload=0.25 cputime=309.272 memavail=1626844 print_time=6863.536 buffer_time=2.502 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 6853.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=4277622 bytes_read=2237197 bytes_retransmit=9 bytes_invalid=0 send_seq=122261 receive_seq=122261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1321416 sysload=0.25 cputime=309.327 memavail=1626904 print_time=6864.039 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.2 pwm=0.369
Stats 6854.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=4278836 bytes_read=2237618 bytes_retransmit=9 bytes_invalid=0 send_seq=122289 receive_seq=122289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=55.5 mcu_temp: temp=44.6 sd_pos=1321625 sysload=0.23 cputime=309.390 memavail=1626648 print_time=6865.418 buffer_time=2.382 print_stall=0 extruder: target=215 temp=215.2 pwm=0.409
Stats 6855.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=4279727 bytes_read=2238060 bytes_retransmit=9 bytes_invalid=0 send_seq=122314 receive_seq=122314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1321775 sysload=0.23 cputime=309.430 memavail=1627500 print_time=6866.290 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 6856.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=4280676 bytes_read=2238486 bytes_retransmit=9 bytes_invalid=0 send_seq=122339 receive_seq=122339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1321894 sysload=0.23 cputime=309.467 memavail=1627480 print_time=6867.102 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.2 pwm=0.382
Stats 6857.3: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000058 bytes_write=4281885 bytes_read=2238918 bytes_retransmit=9 bytes_invalid=0 send_seq=122368 receive_seq=122368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.329 rpi: temp=56.0 mcu_temp: temp=44.6 sd_pos=1322103 sysload=0.23 cputime=309.527 memavail=1627228 print_time=6868.215 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.1 pwm=0.463
Stats 6858.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4283042 bytes_read=2239395 bytes_retransmit=9 bytes_invalid=0 send_seq=122397 receive_seq=122397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=54.9 pwm=0.253 rpi: temp=56.5 mcu_temp: temp=44.2 sd_pos=1322307 sysload=0.23 cputime=309.587 memavail=1627288 print_time=6869.137 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.1 pwm=0.436
Stats 6859.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4284594 bytes_read=2239861 bytes_retransmit=9 bytes_invalid=0 send_seq=122430 receive_seq=122430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1322720 sysload=0.21 cputime=309.651 memavail=1627036 print_time=6870.267 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 6860.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4285854 bytes_read=2240298 bytes_retransmit=9 bytes_invalid=0 send_seq=122460 receive_seq=122460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.134 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1322928 sysload=0.21 cputime=309.712 memavail=1627580 print_time=6871.100 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 6861.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4287536 bytes_read=2240795 bytes_retransmit=9 bytes_invalid=0 send_seq=122496 receive_seq=122496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=56.0 mcu_temp: temp=44.7 sd_pos=1323605 sysload=0.21 cputime=309.775 memavail=1627612 print_time=6872.169 buffer_time=2.129 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 6862.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000052 bytes_write=4289750 bytes_read=2241326 bytes_retransmit=9 bytes_invalid=0 send_seq=122542 receive_seq=122542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=55.5 mcu_temp: temp=44.6 sd_pos=1324178 sysload=0.21 cputime=309.845 memavail=1627260 print_time=6873.069 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 6863.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4291962 bytes_read=2241858 bytes_retransmit=9 bytes_invalid=0 send_seq=122588 receive_seq=122588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1324603 sysload=0.21 cputime=309.909 memavail=1627480 print_time=6874.114 buffer_time=2.073 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 6864.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4293375 bytes_read=2242340 bytes_retransmit=9 bytes_invalid=0 send_seq=122621 receive_seq=122621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1324940 sysload=0.20 cputime=309.973 memavail=1627052 print_time=6875.134 buffer_time=2.092 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 6865.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4294656 bytes_read=2242791 bytes_retransmit=9 bytes_invalid=0 send_seq=122651 receive_seq=122651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1325155 sysload=0.20 cputime=310.033 memavail=1627044 print_time=6876.292 buffer_time=2.250 print_stall=0 extruder: target=215 temp=214.8 pwm=0.542
Stats 6866.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4295936 bytes_read=2243233 bytes_retransmit=9 bytes_invalid=0 send_seq=122682 receive_seq=122682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1325431 sysload=0.20 cputime=310.097 memavail=1627052 print_time=6877.383 buffer_time=2.340 print_stall=0 extruder: target=215 temp=214.7 pwm=0.542
Stats 6867.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=4296980 bytes_read=2243685 bytes_retransmit=9 bytes_invalid=0 send_seq=122709 receive_seq=122709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.7 sd_pos=1325554 sysload=0.20 cputime=310.156 memavail=1627052 print_time=6878.132 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.8 pwm=0.455
Stats 6868.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4298242 bytes_read=2244156 bytes_retransmit=9 bytes_invalid=0 send_seq=122740 receive_seq=122740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1325770 sysload=0.20 cputime=310.218 memavail=1626956 print_time=6879.348 buffer_time=2.304 print_stall=0 extruder: target=215 temp=214.9 pwm=0.420
Stats 6869.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4299157 bytes_read=2244563 bytes_retransmit=9 bytes_invalid=0 send_seq=122764 receive_seq=122764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=55.0 mcu_temp: temp=44.5 sd_pos=1325955 sysload=0.26 cputime=310.282 memavail=1626992 print_time=6880.260 buffer_time=2.216 print_stall=0 extruder: target=215 temp=214.9 pwm=0.387
Stats 6870.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4300115 bytes_read=2245015 bytes_retransmit=9 bytes_invalid=0 send_seq=122791 receive_seq=122791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1326077 sysload=0.26 cputime=310.343 memavail=1626748 print_time=6881.209 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.9 pwm=0.455
Stats 6871.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4301059 bytes_read=2245446 bytes_retransmit=9 bytes_invalid=0 send_seq=122817 receive_seq=122817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=44.7 sd_pos=1326194 sysload=0.26 cputime=310.404 memavail=1626748 print_time=6882.141 buffer_time=2.096 print_stall=0 extruder: target=215 temp=214.9 pwm=0.376
Stats 6872.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4302070 bytes_read=2245873 bytes_retransmit=9 bytes_invalid=0 send_seq=122845 receive_seq=122845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=44.2 sd_pos=1326348 sysload=0.26 cputime=310.464 memavail=1626756 print_time=6883.046 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.9 pwm=0.454
Stats 6873.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4303193 bytes_read=2246350 bytes_retransmit=9 bytes_invalid=0 send_seq=122874 receive_seq=122874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.484 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1326569 sysload=0.26 cputime=310.529 memavail=1626756 print_time=6884.189 buffer_time=2.142 print_stall=0 extruder: target=215 temp=214.9 pwm=0.447
Stats 6874.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4304170 bytes_read=2246786 bytes_retransmit=9 bytes_invalid=0 send_seq=122901 receive_seq=122901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=55.0 mcu_temp: temp=44.5 sd_pos=1326719 sysload=0.32 cputime=310.590 memavail=1626756 print_time=6885.415 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 6875.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4304748 bytes_read=2247173 bytes_retransmit=9 bytes_invalid=0 send_seq=122921 receive_seq=122921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.651 rpi: temp=55.5 mcu_temp: temp=44.4 sd_pos=1326810 sysload=0.32 cputime=310.628 memavail=1626764 print_time=6886.051 buffer_time=2.003 print_stall=0 extruder: target=215 temp=214.9 pwm=0.465
Stats 6876.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4305729 bytes_read=2247625 bytes_retransmit=9 bytes_invalid=0 send_seq=122948 receive_seq=122948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=44.2 sd_pos=1326965 sysload=0.32 cputime=310.686 memavail=1626764 print_time=6887.228 buffer_time=2.180 print_stall=0 extruder: target=215 temp=214.8 pwm=0.463
Stats 6877.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000054 bytes_write=4306726 bytes_read=2248051 bytes_retransmit=9 bytes_invalid=0 send_seq=122973 receive_seq=122973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.455 rpi: temp=56.0 mcu_temp: temp=44.6 sd_pos=1327120 sysload=0.32 cputime=310.747 memavail=1626764 print_time=6888.345 buffer_time=2.297 print_stall=0 extruder: target=215 temp=214.8 pwm=0.523
Stats 6878.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4307650 bytes_read=2248473 bytes_retransmit=9 bytes_invalid=0 send_seq=122997 receive_seq=122997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.353 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1327273 sysload=0.32 cputime=310.806 memavail=1626520 print_time=6889.394 buffer_time=2.345 print_stall=0 extruder: target=215 temp=214.8 pwm=0.446
Stats 6879.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4309893 bytes_read=2249015 bytes_retransmit=9 bytes_invalid=0 send_seq=123042 receive_seq=123042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.145 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1328391 sysload=0.29 cputime=310.879 memavail=1626772 print_time=6890.672 buffer_time=2.623 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 6880.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4311886 bytes_read=2249526 bytes_retransmit=9 bytes_invalid=0 send_seq=123084 receive_seq=123084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1329166 sysload=0.29 cputime=310.951 memavail=1626460 print_time=6891.290 buffer_time=2.241 print_stall=0 extruder: target=215 temp=214.7 pwm=0.536
Stats 6881.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4313884 bytes_read=2250013 bytes_retransmit=9 bytes_invalid=0 send_seq=123124 receive_seq=123124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=55.5 mcu_temp: temp=44.0 sd_pos=1329835 sysload=0.29 cputime=311.022 memavail=1626460 print_time=6892.333 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 6882.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000053 bytes_write=4316781 bytes_read=2250615 bytes_retransmit=9 bytes_invalid=0 send_seq=123181 receive_seq=123181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.538 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1331345 sysload=0.29 cputime=311.108 memavail=1626520 print_time=6893.292 buffer_time=2.241 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 6883.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=4319746 bytes_read=2251227 bytes_retransmit=9 bytes_invalid=0 send_seq=123240 receive_seq=123240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.039 rpi: temp=56.5 mcu_temp: temp=44.6 sd_pos=1333042 sysload=0.29 cputime=311.198 memavail=1626772 print_time=6894.196 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 6884.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=4321670 bytes_read=2251709 bytes_retransmit=9 bytes_invalid=0 send_seq=123279 receive_seq=123279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1333381 sysload=0.35 cputime=311.262 memavail=1626780 print_time=6895.216 buffer_time=2.163 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 6885.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=4324072 bytes_read=2252271 bytes_retransmit=9 bytes_invalid=0 send_seq=123328 receive_seq=123328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.5 mcu_temp: temp=44.5 sd_pos=1333931 sysload=0.35 cputime=311.308 memavail=1627020 print_time=6896.674 buffer_time=2.621 print_stall=0 extruder: target=215 temp=215.0 pwm=0.416
Stats 6886.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=4325460 bytes_read=2252732 bytes_retransmit=9 bytes_invalid=0 send_seq=123360 receive_seq=123360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.307 rpi: temp=55.0 mcu_temp: temp=44.2 sd_pos=1335442 sysload=0.35 cputime=311.384 memavail=1627012 print_time=6897.222 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.0 pwm=0.452
Stats 6887.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=4327729 bytes_read=2253259 bytes_retransmit=9 bytes_invalid=0 send_seq=123408 receive_seq=123408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.048 rpi: temp=57.0 mcu_temp: temp=44.1 sd_pos=1337875 sysload=0.35 cputime=311.477 memavail=1627156 print_time=6898.216 buffer_time=2.162 print_stall=0 extruder: target=215 temp=214.8 pwm=0.598
Stats 6888.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4330329 bytes_read=2253867 bytes_retransmit=9 bytes_invalid=0 send_seq=123463 receive_seq=123463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=56.0 mcu_temp: temp=44.5 sd_pos=1339743 sysload=0.35 cputime=311.560 memavail=1627096 print_time=6899.190 buffer_time=2.135 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 6889.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4332547 bytes_read=2254409 bytes_retransmit=9 bytes_invalid=0 send_seq=123509 receive_seq=123509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1340767 sysload=0.32 cputime=311.633 memavail=1627020 print_time=6900.063 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 6890.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4335041 bytes_read=2254951 bytes_retransmit=9 bytes_invalid=0 send_seq=123560 receive_seq=123560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=56.5 mcu_temp: temp=44.7 sd_pos=1342285 sysload=0.32 cputime=311.719 memavail=1627272 print_time=6901.305 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.0 pwm=0.515
Stats 6891.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4337186 bytes_read=2255478 bytes_retransmit=9 bytes_invalid=0 send_seq=123607 receive_seq=123602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1343499 sysload=0.32 cputime=311.776 memavail=1627500 print_time=6902.404 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6892.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4337882 bytes_read=2255909 bytes_retransmit=9 bytes_invalid=0 send_seq=123628 receive_seq=123628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.402 rpi: temp=55.5 mcu_temp: temp=44.1 sd_pos=1343852 sysload=0.32 cputime=311.842 memavail=1627548 print_time=6903.329 buffer_time=2.272 print_stall=0 extruder: target=215 temp=215.1 pwm=0.473
Stats 6893.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4339707 bytes_read=2256407 bytes_retransmit=9 bytes_invalid=0 send_seq=123667 receive_seq=123667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1345364 sysload=0.32 cputime=311.918 memavail=1627296 print_time=6904.306 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.2 pwm=0.462
Stats 6894.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4341722 bytes_read=2256939 bytes_retransmit=9 bytes_invalid=0 send_seq=123711 receive_seq=123710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.459 rpi: temp=56.5 mcu_temp: temp=44.4 sd_pos=1346917 sysload=0.38 cputime=311.998 memavail=1627484 print_time=6905.119 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 6895.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4343977 bytes_read=2257475 bytes_retransmit=9 bytes_invalid=0 send_seq=123757 receive_seq=123757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.360 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1349086 sysload=0.38 cputime=312.063 memavail=1627360 print_time=6906.176 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.2 pwm=0.375
Stats 6896.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4346027 bytes_read=2257962 bytes_retransmit=9 bytes_invalid=0 send_seq=123800 receive_seq=123797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1351141 sysload=0.38 cputime=312.153 memavail=1626852 print_time=6907.311 buffer_time=2.241 print_stall=0 extruder: target=215 temp=214.9 pwm=0.617
Stats 6897.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4347178 bytes_read=2258473 bytes_retransmit=9 bytes_invalid=0 send_seq=123830 receive_seq=123830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1351940 sysload=0.38 cputime=312.226 memavail=1626600 print_time=6908.087 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 6898.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4348259 bytes_read=2258895 bytes_retransmit=9 bytes_invalid=0 send_seq=123857 receive_seq=123857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.550 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1352626 sysload=0.38 cputime=312.299 memavail=1626852 print_time=6909.397 buffer_time=2.327 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 6899.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4350470 bytes_read=2259412 bytes_retransmit=9 bytes_invalid=0 send_seq=123903 receive_seq=123903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.575 rpi: temp=55.5 mcu_temp: temp=43.9 sd_pos=1353963 sysload=0.35 cputime=312.379 memavail=1626600 print_time=6910.434 buffer_time=2.363 print_stall=0 extruder: target=215 temp=215.2 pwm=0.397
Stats 6900.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4352418 bytes_read=2259963 bytes_retransmit=9 bytes_invalid=0 send_seq=123947 receive_seq=123947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1355562 sysload=0.35 cputime=312.465 memavail=1626912 print_time=6911.319 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.1 pwm=0.487
Stats 6901.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4354071 bytes_read=2260430 bytes_retransmit=9 bytes_invalid=0 send_seq=123983 receive_seq=123983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=55.5 mcu_temp: temp=44.5 sd_pos=1357053 sysload=0.35 cputime=312.546 memavail=1627184 print_time=6912.097 buffer_time=2.025 print_stall=0 extruder: target=215 temp=215.1 pwm=0.487
Stats 6902.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4355539 bytes_read=2260892 bytes_retransmit=9 bytes_invalid=0 send_seq=124016 receive_seq=124015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=56.0 mcu_temp: temp=44.0 sd_pos=1358751 sysload=0.35 cputime=312.633 memavail=1627184 print_time=6913.118 buffer_time=2.046 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 6903.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4356372 bytes_read=2261343 bytes_retransmit=9 bytes_invalid=0 send_seq=124039 receive_seq=124039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=56.0 mcu_temp: temp=44.3 sd_pos=1359192 sysload=0.35 cputime=312.676 memavail=1627436 print_time=6914.356 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 6904.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4357725 bytes_read=2261795 bytes_retransmit=9 bytes_invalid=0 send_seq=124072 receive_seq=124072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1360652 sysload=0.32 cputime=312.755 memavail=1627436 print_time=6915.208 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 6905.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4360251 bytes_read=2262337 bytes_retransmit=9 bytes_invalid=0 send_seq=124123 receive_seq=124123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=44.1 sd_pos=1363043 sysload=0.32 cputime=312.814 memavail=1627244 print_time=6916.340 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 6906.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=4362145 bytes_read=2262868 bytes_retransmit=9 bytes_invalid=0 send_seq=124163 receive_seq=124163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1365181 sysload=0.32 cputime=312.902 memavail=1627292 print_time=6917.129 buffer_time=2.055 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 6907.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4364480 bytes_read=2263400 bytes_retransmit=9 bytes_invalid=0 send_seq=124209 receive_seq=124209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1368016 sysload=0.32 cputime=313.002 memavail=1627532 print_time=6918.208 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 6908.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4366382 bytes_read=2263882 bytes_retransmit=9 bytes_invalid=0 send_seq=124248 receive_seq=124248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1369428 sysload=0.32 cputime=313.078 memavail=1627596 print_time=6919.265 buffer_time=2.190 print_stall=0 extruder: target=215 temp=215.1 pwm=0.381
Stats 6909.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4367119 bytes_read=2264313 bytes_retransmit=9 bytes_invalid=0 send_seq=124269 receive_seq=124268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=56.0 mcu_temp: temp=44.2 sd_pos=1369794 sysload=0.29 cputime=313.141 memavail=1627588 print_time=6920.264 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 6910.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4369077 bytes_read=2264804 bytes_retransmit=9 bytes_invalid=0 send_seq=124311 receive_seq=124310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.550 rpi: temp=56.5 mcu_temp: temp=43.8 sd_pos=1371661 sysload=0.29 cputime=313.231 memavail=1627840 print_time=6921.160 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.1 pwm=0.403
Stats 6911.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=4371699 bytes_read=2265365 bytes_retransmit=9 bytes_invalid=0 send_seq=124364 receive_seq=124364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.098 rpi: temp=55.5 mcu_temp: temp=44.3 sd_pos=1374148 sysload=0.29 cputime=313.332 memavail=1627588 print_time=6922.346 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 6912.4: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=4374495 bytes_read=2265960 bytes_retransmit=9 bytes_invalid=0 send_seq=124419 receive_seq=124419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.031 rpi: temp=56.5 mcu_temp: temp=43.7 sd_pos=1375476 sysload=0.29 cputime=313.428 memavail=1627596 print_time=6923.359 buffer_time=2.278 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 6913.4: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=4376548 bytes_read=2266452 bytes_retransmit=9 bytes_invalid=0 send_seq=124462 receive_seq=124462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=1376474 sysload=0.29 cputime=313.499 memavail=1627800 print_time=6924.210 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.8 pwm=0.533
Stats 6914.4: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=4378422 bytes_read=2266954 bytes_retransmit=9 bytes_invalid=0 send_seq=124502 receive_seq=124502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.8 sd_pos=1379457 sysload=0.27 cputime=313.596 memavail=1627288 print_time=6925.231 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 6915.4: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=4381155 bytes_read=2267535 bytes_retransmit=9 bytes_invalid=0 send_seq=124555 receive_seq=124555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1381911 sysload=0.27 cputime=313.693 memavail=1626788 print_time=6926.331 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.0 pwm=0.395
Stats 6916.4: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=4382709 bytes_read=2267992 bytes_retransmit=9 bytes_invalid=0 send_seq=124590 receive_seq=124589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=56.5 mcu_temp: temp=43.8 sd_pos=1383714 sysload=0.27 cputime=313.784 memavail=1626528 print_time=6927.109 buffer_time=2.025 print_stall=0 extruder: target=215 temp=214.8 pwm=0.523
Stats 6917.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4385626 bytes_read=2268600 bytes_retransmit=9 bytes_invalid=0 send_seq=124647 receive_seq=124647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=1385747 sysload=0.27 cputime=313.878 memavail=1626788 print_time=6928.296 buffer_time=2.211 print_stall=0 extruder: target=215 temp=214.8 pwm=0.523
Stats 6918.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4387561 bytes_read=2269086 bytes_retransmit=9 bytes_invalid=0 send_seq=124688 receive_seq=124681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=55.5 mcu_temp: temp=44.2 sd_pos=1388194 sysload=0.27 cputime=313.969 memavail=1627028 print_time=6929.329 buffer_time=2.233 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 6919.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4389648 bytes_read=2269618 bytes_retransmit=9 bytes_invalid=0 send_seq=124730 receive_seq=124730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.570 rpi: temp=55.0 mcu_temp: temp=43.5 sd_pos=1389829 sysload=0.41 cputime=314.052 memavail=1627412 print_time=6930.234 buffer_time=2.138 print_stall=0 extruder: target=215 temp=214.8 pwm=0.531
Stats 6920.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4392143 bytes_read=2270175 bytes_retransmit=9 bytes_invalid=0 send_seq=124781 receive_seq=124781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=1391869 sysload=0.41 cputime=314.143 memavail=1627356 print_time=6931.347 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.0 pwm=0.389
Stats 6921.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4393788 bytes_read=2270681 bytes_retransmit=9 bytes_invalid=0 send_seq=124819 receive_seq=124819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=55.5 mcu_temp: temp=43.6 sd_pos=1393227 sysload=0.41 cputime=314.226 memavail=1627544 print_time=6932.116 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 6922.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4395820 bytes_read=2271189 bytes_retransmit=9 bytes_invalid=0 send_seq=124860 receive_seq=124860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=56.5 mcu_temp: temp=43.4 sd_pos=1395430 sysload=0.41 cputime=314.319 memavail=1627732 print_time=6933.369 buffer_time=2.271 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 6923.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4397010 bytes_read=2271636 bytes_retransmit=9 bytes_invalid=0 send_seq=124889 receive_seq=124889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=56.0 mcu_temp: temp=44.4 sd_pos=1396894 sysload=0.41 cputime=314.394 memavail=1627320 print_time=6934.139 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.0 pwm=0.468
Stats 6924.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4399963 bytes_read=2272232 bytes_retransmit=9 bytes_invalid=0 send_seq=124945 receive_seq=124945 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.623 rpi: temp=56.0 mcu_temp: temp=44.1 sd_pos=1399827 sysload=0.38 cputime=314.497 memavail=1627320 print_time=6935.507 buffer_time=2.407 print_stall=0 extruder: target=215 temp=215.1 pwm=0.340
Stats 6925.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4401447 bytes_read=2272679 bytes_retransmit=9 bytes_invalid=0 send_seq=124977 receive_seq=124977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1402223 sysload=0.38 cputime=314.579 memavail=1627304 print_time=6936.270 buffer_time=2.170 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 6926.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4403420 bytes_read=2273186 bytes_retransmit=9 bytes_invalid=0 send_seq=125018 receive_seq=125018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=56.5 mcu_temp: temp=44.3 sd_pos=1404925 sysload=0.38 cputime=314.642 memavail=1627500 print_time=6937.181 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 6927.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4404754 bytes_read=2273662 bytes_retransmit=9 bytes_invalid=0 send_seq=125049 receive_seq=125047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=1405370 sysload=0.38 cputime=314.705 memavail=1627556 print_time=6938.426 buffer_time=2.323 print_stall=0 extruder: target=215 temp=215.0 pwm=0.392
Stats 6928.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4405291 bytes_read=2274049 bytes_retransmit=9 bytes_invalid=0 send_seq=125067 receive_seq=125067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.032 rpi: temp=57.0 mcu_temp: temp=43.8 sd_pos=1405602 sysload=0.38 cputime=314.763 memavail=1627564 print_time=6939.306 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 6929.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4405932 bytes_read=2274446 bytes_retransmit=9 bytes_invalid=0 send_seq=125086 receive_seq=125086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.594 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=1405864 sysload=0.35 cputime=314.822 memavail=1627500 print_time=6940.284 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.1 pwm=0.386
Stats 6930.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4406504 bytes_read=2274847 bytes_retransmit=9 bytes_invalid=0 send_seq=125104 receive_seq=125103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.398 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=1406137 sysload=0.35 cputime=314.882 memavail=1627572 print_time=6941.358 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 6931.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4407067 bytes_read=2275224 bytes_retransmit=9 bytes_invalid=0 send_seq=125122 receive_seq=125121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.009 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1406377 sysload=0.35 cputime=314.942 memavail=1627572 print_time=6942.239 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.0 pwm=0.498
Stats 6932.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4409014 bytes_read=2275751 bytes_retransmit=9 bytes_invalid=0 send_seq=125163 receive_seq=125163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.011 rpi: temp=56.5 mcu_temp: temp=43.7 sd_pos=1407566 sysload=0.35 cputime=315.021 memavail=1627572 print_time=6943.745 buffer_time=2.638 print_stall=0 extruder: target=215 temp=215.0 pwm=0.553
Stats 6933.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4410449 bytes_read=2276232 bytes_retransmit=9 bytes_invalid=0 send_seq=125196 receive_seq=125196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.053 rpi: temp=56.0 mcu_temp: temp=43.9 sd_pos=1408617 sysload=0.35 cputime=315.090 memavail=1627584 print_time=6944.232 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 6934.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4413614 bytes_read=2276819 bytes_retransmit=9 bytes_invalid=0 send_seq=125256 receive_seq=125256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=1410084 sysload=0.32 cputime=315.172 memavail=1627544 print_time=6945.328 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 6935.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4415455 bytes_read=2277331 bytes_retransmit=9 bytes_invalid=0 send_seq=125295 receive_seq=125295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=1410469 sysload=0.32 cputime=315.218 memavail=1627108 print_time=6946.384 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 6936.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4416606 bytes_read=2277772 bytes_retransmit=9 bytes_invalid=0 send_seq=125323 receive_seq=125323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1410678 sysload=0.32 cputime=315.278 memavail=1627096 print_time=6947.204 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 6937.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4418181 bytes_read=2278239 bytes_retransmit=9 bytes_invalid=0 send_seq=125356 receive_seq=125356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=56.5 mcu_temp: temp=44.1 sd_pos=1410947 sysload=0.32 cputime=315.345 memavail=1627396 print_time=6948.341 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.2 pwm=0.424
Stats 6938.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4419378 bytes_read=2278691 bytes_retransmit=9 bytes_invalid=0 send_seq=125383 receive_seq=125383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=56.0 mcu_temp: temp=43.7 sd_pos=1411124 sysload=0.32 cputime=315.408 memavail=1627044 print_time=6949.362 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 6939.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4420593 bytes_read=2279137 bytes_retransmit=9 bytes_invalid=0 send_seq=125412 receive_seq=125412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=42 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=1411302 sysload=0.45 cputime=315.470 memavail=1627132 print_time=6950.474 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 6940.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4421569 bytes_read=2279549 bytes_retransmit=9 bytes_invalid=0 send_seq=125438 receive_seq=125437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=1411421 sysload=0.45 cputime=315.530 memavail=1627368 print_time=6951.264 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 6941.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4422746 bytes_read=2280016 bytes_retransmit=9 bytes_invalid=0 send_seq=125467 receive_seq=125467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=1411599 sysload=0.45 cputime=315.592 memavail=1627688 print_time=6952.508 buffer_time=2.391 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6942.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4423678 bytes_read=2280442 bytes_retransmit=9 bytes_invalid=0 send_seq=125490 receive_seq=125489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=57.0 mcu_temp: temp=44.2 sd_pos=1411717 sysload=0.45 cputime=315.650 memavail=1627744 print_time=6953.371 buffer_time=2.252 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 6943.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4424568 bytes_read=2280854 bytes_retransmit=9 bytes_invalid=0 send_seq=125514 receive_seq=125514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=1411867 sysload=0.45 cputime=315.708 memavail=1627460 print_time=6954.263 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 6944.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4426841 bytes_read=2281336 bytes_retransmit=9 bytes_invalid=0 send_seq=125559 receive_seq=125547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=547 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.463 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=1412758 sysload=0.50 cputime=315.778 memavail=1627500 print_time=6955.521 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 6945.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4429647 bytes_read=2281972 bytes_retransmit=9 bytes_invalid=0 send_seq=125614 receive_seq=125614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.495 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=1413376 sysload=0.50 cputime=315.823 memavail=1627124 print_time=6956.218 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 6946.4: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=4432108 bytes_read=2282509 bytes_retransmit=9 bytes_invalid=0 send_seq=125664 receive_seq=125664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.539 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=1414092 sysload=0.50 cputime=315.866 memavail=1626816 print_time=6957.243 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 6947.4: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000056 bytes_write=4435400 bytes_read=2283172 bytes_retransmit=9 bytes_invalid=0 send_seq=125730 receive_seq=125730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.379 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=1414950 sysload=0.50 cputime=315.941 memavail=1626824 print_time=6958.724 buffer_time=2.593 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 6948.4: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000056 bytes_write=4436008 bytes_read=2283579 bytes_retransmit=9 bytes_invalid=0 send_seq=125749 receive_seq=125749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=56.0 mcu_temp: temp=43.8 sd_pos=1415041 sysload=0.50 cputime=316.001 memavail=1627132 print_time=6959.335 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 6949.4: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000056 bytes_write=4437041 bytes_read=2284001 bytes_retransmit=9 bytes_invalid=0 send_seq=125776 receive_seq=125776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=44.2 sd_pos=1415258 sysload=0.46 cputime=316.066 memavail=1627140 print_time=6960.570 buffer_time=2.437 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 6950.4: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000056 bytes_write=4437695 bytes_read=2284428 bytes_retransmit=9 bytes_invalid=0 send_seq=125798 receive_seq=125798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.523 rpi: temp=56.5 mcu_temp: temp=43.8 sd_pos=1415320 sysload=0.46 cputime=316.124 memavail=1627076 print_time=6961.214 buffer_time=2.081 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 6951.4: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000056 bytes_write=4438677 bytes_read=2284859 bytes_retransmit=9 bytes_invalid=0 send_seq=125824 receive_seq=125824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=1415499 sysload=0.46 cputime=316.186 memavail=1626776 print_time=6962.491 buffer_time=2.357 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 6952.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4439682 bytes_read=2285301 bytes_retransmit=9 bytes_invalid=0 send_seq=125852 receive_seq=125852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=57.0 mcu_temp: temp=44.0 sd_pos=1415648 sysload=0.46 cputime=316.249 memavail=1627020 print_time=6963.709 buffer_time=2.575 print_stall=0 extruder: target=215 temp=215.0 pwm=0.420
Stats 6953.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4440256 bytes_read=2285713 bytes_retransmit=9 bytes_invalid=0 send_seq=125871 receive_seq=125871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=1415715 sysload=0.46 cputime=316.303 memavail=1627028 print_time=6964.318 buffer_time=2.183 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 6954.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4441184 bytes_read=2286144 bytes_retransmit=9 bytes_invalid=0 send_seq=125897 receive_seq=125897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=1415900 sysload=0.42 cputime=316.365 memavail=1627040 print_time=6965.638 buffer_time=2.503 print_stall=0 extruder: target=215 temp=214.8 pwm=0.483
Stats 6955.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4441808 bytes_read=2286521 bytes_retransmit=9 bytes_invalid=0 send_seq=125915 receive_seq=125915 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=1415962 sysload=0.42 cputime=316.404 memavail=1627072 print_time=6966.185 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.7 pwm=0.529
Stats 6956.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000051 bytes_write=4442835 bytes_read=2286988 bytes_retransmit=9 bytes_invalid=0 send_seq=125945 receive_seq=125945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.382 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=1416116 sysload=0.42 cputime=316.464 memavail=1627028 print_time=6967.193 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.9 pwm=0.411
Stats 6957.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4444169 bytes_read=2287454 bytes_retransmit=9 bytes_invalid=0 send_seq=125975 receive_seq=125975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.078 rpi: temp=57.5 mcu_temp: temp=44.1 sd_pos=1416307 sysload=0.42 cputime=316.526 memavail=1626952 print_time=6968.511 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 6958.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4445091 bytes_read=2287861 bytes_retransmit=9 bytes_invalid=0 send_seq=125999 receive_seq=125999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.9 pwm=0.430 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=1416461 sysload=0.42 cputime=316.583 memavail=1626648 print_time=6969.381 buffer_time=2.237 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 6959.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4446065 bytes_read=2288323 bytes_retransmit=9 bytes_invalid=0 send_seq=126028 receive_seq=126028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.332 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=1416616 sysload=0.39 cputime=316.644 memavail=1626704 print_time=6970.204 buffer_time=2.060 print_stall=0 extruder: target=215 temp=214.9 pwm=0.459
Stats 6960.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4447343 bytes_read=2288779 bytes_retransmit=9 bytes_invalid=0 send_seq=126060 receive_seq=126059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=54.8 pwm=0.837 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1416829 sysload=0.39 cputime=316.707 memavail=1626956 print_time=6971.374 buffer_time=2.230 print_stall=0 extruder: target=215 temp=215.3 pwm=0.256
Stats 6961.4: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000052 bytes_write=4448527 bytes_read=2289211 bytes_retransmit=9 bytes_invalid=0 send_seq=126088 receive_seq=126088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.323 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=1417075 sysload=0.39 cputime=316.769 memavail=1627208 print_time=6972.325 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 6962.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=4450184 bytes_read=2289733 bytes_retransmit=9 bytes_invalid=0 send_seq=126126 receive_seq=126126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=1417443 sysload=0.39 cputime=316.832 memavail=1627804 print_time=6973.366 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 6963.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=4451742 bytes_read=2290214 bytes_retransmit=9 bytes_invalid=0 send_seq=126162 receive_seq=126162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=1417659 sysload=0.39 cputime=316.897 memavail=1627768 print_time=6974.422 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.2 pwm=0.384
Stats 6964.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=4453298 bytes_read=2290681 bytes_retransmit=9 bytes_invalid=0 send_seq=126198 receive_seq=126198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=1417995 sysload=0.35 cputime=316.963 memavail=1627556 print_time=6975.275 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.2 pwm=0.393
Stats 6965.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=4456852 bytes_read=2291353 bytes_retransmit=9 bytes_invalid=0 send_seq=126269 receive_seq=126269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=56.5 mcu_temp: temp=43.4 sd_pos=1419835 sysload=0.35 cputime=317.026 memavail=1627776 print_time=6976.329 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 6966.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=4457916 bytes_read=2291784 bytes_retransmit=9 bytes_invalid=0 send_seq=126296 receive_seq=126295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1419985 sysload=0.35 cputime=317.081 memavail=1627760 print_time=6977.361 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.1 pwm=0.508
Stats 6967.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4458845 bytes_read=2292211 bytes_retransmit=9 bytes_invalid=0 send_seq=126321 receive_seq=126320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=1420134 sysload=0.35 cputime=317.143 memavail=1627728 print_time=6978.400 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.2 pwm=0.419
Stats 6968.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4459848 bytes_read=2292668 bytes_retransmit=9 bytes_invalid=0 send_seq=126349 receive_seq=126348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.147 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=1420313 sysload=0.35 cputime=317.205 memavail=1628052 print_time=6979.532 buffer_time=2.378 print_stall=0 extruder: target=215 temp=215.2 pwm=0.364
Stats 6969.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4460843 bytes_read=2293104 bytes_retransmit=9 bytes_invalid=0 send_seq=126376 receive_seq=126375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.083 rpi: temp=56.5 mcu_temp: temp=43.5 sd_pos=1420431 sysload=0.33 cputime=317.264 memavail=1627540 print_time=6980.681 buffer_time=2.525 print_stall=0 extruder: target=215 temp=215.2 pwm=0.379
Stats 6970.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4461489 bytes_read=2293481 bytes_retransmit=9 bytes_invalid=0 send_seq=126396 receive_seq=126395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.172 rpi: temp=57.0 mcu_temp: temp=44.1 sd_pos=1420496 sysload=0.33 cputime=317.320 memavail=1627476 print_time=6981.293 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.0 pwm=0.551
Stats 6971.4: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4463517 bytes_read=2294011 bytes_retransmit=9 bytes_invalid=0 send_seq=126440 receive_seq=126440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=1421347 sysload=0.33 cputime=317.391 memavail=1627460 print_time=6982.372 buffer_time=2.214 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 6972.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=4466668 bytes_read=2294626 bytes_retransmit=9 bytes_invalid=0 send_seq=126502 receive_seq=126502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.182 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=1423494 sysload=0.33 cputime=317.479 memavail=1627804 print_time=6983.492 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 6973.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=4469228 bytes_read=2295156 bytes_retransmit=9 bytes_invalid=0 send_seq=126553 receive_seq=126552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=56.5 mcu_temp: temp=43.5 sd_pos=1424462 sysload=0.33 cputime=317.556 memavail=1627824 print_time=6984.501 buffer_time=2.340 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 6974.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=4471240 bytes_read=2295698 bytes_retransmit=9 bytes_invalid=0 send_seq=126597 receive_seq=126597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=1426723 sysload=0.30 cputime=317.645 memavail=1628128 print_time=6985.314 buffer_time=2.152 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 6975.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=4473722 bytes_read=2296244 bytes_retransmit=9 bytes_invalid=0 send_seq=126646 receive_seq=126646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=1429018 sysload=0.30 cputime=317.705 memavail=1627932 print_time=6986.419 buffer_time=2.255 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 6976.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=4476821 bytes_read=2296821 bytes_retransmit=9 bytes_invalid=0 send_seq=126705 receive_seq=126704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=1430805 sysload=0.30 cputime=317.784 memavail=1627820 print_time=6987.568 buffer_time=2.404 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 6977.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4478221 bytes_read=2297319 bytes_retransmit=9 bytes_invalid=0 send_seq=126737 receive_seq=126737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=1431541 sysload=0.30 cputime=317.849 memavail=1627636 print_time=6988.201 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 6978.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4480882 bytes_read=2297875 bytes_retransmit=9 bytes_invalid=0 send_seq=126788 receive_seq=126788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.212 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=1433295 sysload=0.30 cputime=317.933 memavail=1627376 print_time=6989.469 buffer_time=2.301 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 6979.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4482019 bytes_read=2298287 bytes_retransmit=9 bytes_invalid=0 send_seq=126814 receive_seq=126813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.370 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=1433800 sysload=0.27 cputime=317.998 memavail=1627328 print_time=6990.246 buffer_time=2.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 6980.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4482878 bytes_read=2298738 bytes_retransmit=9 bytes_invalid=0 send_seq=126837 receive_seq=126837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1434480 sysload=0.27 cputime=318.066 memavail=1627632 print_time=6991.283 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.1 pwm=0.399
Stats 6981.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=4485412 bytes_read=2299270 bytes_retransmit=9 bytes_invalid=0 send_seq=126886 receive_seq=126886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=1436495 sysload=0.27 cputime=318.148 memavail=1627520 print_time=6992.361 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 6982.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4487233 bytes_read=2299767 bytes_retransmit=9 bytes_invalid=0 send_seq=126925 receive_seq=126925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.116 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=1438386 sysload=0.27 cputime=318.234 memavail=1627692 print_time=6993.196 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.0 pwm=0.434
Stats 6983.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4489688 bytes_read=2300343 bytes_retransmit=9 bytes_invalid=0 send_seq=126974 receive_seq=126974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1440359 sysload=0.27 cputime=318.324 memavail=1627984 print_time=6994.352 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.463
Stats 6984.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4491194 bytes_read=2300790 bytes_retransmit=9 bytes_invalid=0 send_seq=127006 receive_seq=127006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.143 rpi: temp=57.9 mcu_temp: temp=44.2 sd_pos=1441968 sysload=0.25 cputime=318.406 memavail=1628448 print_time=6995.323 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 6985.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4491806 bytes_read=2301172 bytes_retransmit=9 bytes_invalid=0 send_seq=127022 receive_seq=127022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=11 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=1442308 sysload=0.25 cputime=318.466 memavail=1628296 print_time=6996.236 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 6986.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4493590 bytes_read=2301658 bytes_retransmit=9 bytes_invalid=0 send_seq=127057 receive_seq=127056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.340 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=1443564 sysload=0.25 cputime=318.542 memavail=1628148 print_time=6997.532 buffer_time=2.351 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 6987.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4495005 bytes_read=2302120 bytes_retransmit=9 bytes_invalid=0 send_seq=127088 receive_seq=127088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=1444249 sysload=0.25 cputime=318.606 memavail=1628496 print_time=6998.185 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 6988.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4497481 bytes_read=2302662 bytes_retransmit=9 bytes_invalid=0 send_seq=127136 receive_seq=127136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=1446459 sysload=0.25 cputime=318.699 memavail=1628220 print_time=6999.350 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.1 pwm=0.505
Stats 6989.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4499186 bytes_read=2303148 bytes_retransmit=9 bytes_invalid=0 send_seq=127171 receive_seq=127170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.648 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1448652 sysload=0.23 cputime=318.788 memavail=1627960 print_time=7000.378 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 6990.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4499901 bytes_read=2303535 bytes_retransmit=9 bytes_invalid=0 send_seq=127190 receive_seq=127190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=57.0 mcu_temp: temp=44.0 sd_pos=1448972 sysload=0.23 cputime=318.849 memavail=1627756 print_time=7001.213 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.2 pwm=0.377
Stats 6991.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4501036 bytes_read=2303972 bytes_retransmit=9 bytes_invalid=0 send_seq=127218 receive_seq=127217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=1449742 sysload=0.23 cputime=318.917 memavail=1627432 print_time=7002.273 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 6992.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4503303 bytes_read=2304528 bytes_retransmit=9 bytes_invalid=0 send_seq=127263 receive_seq=127262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.173 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=1452084 sysload=0.23 cputime=319.008 memavail=1627740 print_time=7003.327 buffer_time=2.139 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 6993.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4505922 bytes_read=2305065 bytes_retransmit=9 bytes_invalid=0 send_seq=127313 receive_seq=127312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=1454725 sysload=0.23 cputime=319.107 memavail=1627680 print_time=7004.413 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.1 pwm=0.466
Stats 6994.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4507834 bytes_read=2305572 bytes_retransmit=9 bytes_invalid=0 send_seq=127353 receive_seq=127353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.190 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=1457080 sysload=0.21 cputime=319.200 memavail=1627616 print_time=7005.199 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.1 pwm=0.382
Stats 6995.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4510268 bytes_read=2306138 bytes_retransmit=9 bytes_invalid=0 send_seq=127403 receive_seq=127403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.051 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1459139 sysload=0.21 cputime=319.296 memavail=1627616 print_time=7006.218 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 6996.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4510908 bytes_read=2306515 bytes_retransmit=9 bytes_invalid=0 send_seq=127421 receive_seq=127421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=1459502 sysload=0.21 cputime=319.359 memavail=1627692 print_time=7007.196 buffer_time=2.003 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 6997.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=4512843 bytes_read=2307022 bytes_retransmit=9 bytes_invalid=0 send_seq=127462 receive_seq=127462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.186 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=1461180 sysload=0.21 cputime=319.449 memavail=1627352 print_time=7008.433 buffer_time=2.239 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 6998.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000030 mcu_task_stddev=0.000065 bytes_write=4514512 bytes_read=2307539 bytes_retransmit=9 bytes_invalid=0 send_seq=127499 receive_seq=127499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.438 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=1463229 sysload=0.21 cputime=319.538 memavail=1627448 print_time=7009.223 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.0 pwm=0.403
Stats 6999.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000030 mcu_task_stddev=0.000065 bytes_write=4517648 bytes_read=2308136 bytes_retransmit=9 bytes_invalid=0 send_seq=127561 receive_seq=127561 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=1464557 sysload=0.28 cputime=319.620 memavail=1626944 print_time=7010.512 buffer_time=2.317 print_stall=0 extruder: target=215 temp=214.8 pwm=0.574
Stats 7000.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000030 mcu_task_stddev=0.000065 bytes_write=4520504 bytes_read=2308723 bytes_retransmit=9 bytes_invalid=0 send_seq=127618 receive_seq=127618 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=1465935 sysload=0.28 cputime=319.700 memavail=1626572 print_time=7011.730 buffer_time=2.534 print_stall=0 extruder: target=215 temp=214.9 pwm=0.439
Stats 7001.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000030 mcu_task_stddev=0.000065 bytes_write=4521650 bytes_read=2309184 bytes_retransmit=9 bytes_invalid=0 send_seq=127647 receive_seq=127647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1467472 sysload=0.28 cputime=319.779 memavail=1626652 print_time=7012.252 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.8 pwm=0.522
Stats 7002.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000030 mcu_task_stddev=0.000065 bytes_write=4523550 bytes_read=2309666 bytes_retransmit=9 bytes_invalid=0 send_seq=127686 receive_seq=127686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=57.0 mcu_temp: temp=43.8 sd_pos=1470151 sysload=0.28 cputime=319.874 memavail=1626580 print_time=7013.285 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 7003.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=4526326 bytes_read=2310259 bytes_retransmit=9 bytes_invalid=0 send_seq=127741 receive_seq=127741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=1472512 sysload=0.28 cputime=319.970 memavail=1626328 print_time=7014.321 buffer_time=2.124 print_stall=0 extruder: target=215 temp=214.9 pwm=0.431
Stats 7004.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=4528583 bytes_read=2310805 bytes_retransmit=9 bytes_invalid=0 send_seq=127787 receive_seq=127787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=58.9 mcu_temp: temp=44.3 sd_pos=1474431 sysload=0.25 cputime=320.055 memavail=1626424 print_time=7015.426 buffer_time=2.228 print_stall=0 extruder: target=215 temp=214.8 pwm=0.504
Stats 7005.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=4530697 bytes_read=2311317 bytes_retransmit=9 bytes_invalid=0 send_seq=127832 receive_seq=127832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996376 heater_bed: target=55 temp=54.9 pwm=0.425 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=1476234 sysload=0.25 cputime=320.117 memavail=1626472 print_time=7016.295 buffer_time=2.096 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 7006.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=4532838 bytes_read=2311824 bytes_retransmit=9 bytes_invalid=0 send_seq=127873 receive_seq=127873 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996373 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=1478329 sysload=0.25 cputime=320.191 memavail=1626504 print_time=7017.228 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.9 pwm=0.453
Stats 7007.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=4534653 bytes_read=2312335 bytes_retransmit=9 bytes_invalid=0 send_seq=127912 receive_seq=127912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996372 heater_bed: target=55 temp=55.0 pwm=0.167 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=1480304 sysload=0.25 cputime=320.279 memavail=1626724 print_time=7018.271 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.0 pwm=0.378
Stats 7008.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4537274 bytes_read=2312893 bytes_retransmit=9 bytes_invalid=0 send_seq=127963 receive_seq=127963 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996368 heater_bed: target=55 temp=54.9 pwm=0.324 rpi: temp=57.9 mcu_temp: temp=44.2 sd_pos=1482243 sysload=0.25 cputime=320.365 memavail=1626508 print_time=7019.381 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.1 pwm=0.378
Stats 7009.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4539020 bytes_read=2313380 bytes_retransmit=9 bytes_invalid=0 send_seq=128000 receive_seq=128000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.102 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1484293 sysload=0.23 cputime=320.456 memavail=1626408 print_time=7020.579 buffer_time=2.378 print_stall=0 extruder: target=215 temp=215.0 pwm=0.475
Stats 7010.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4540459 bytes_read=2313872 bytes_retransmit=9 bytes_invalid=0 send_seq=128033 receive_seq=128033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=58.4 mcu_temp: temp=44.1 sd_pos=1485725 sysload=0.23 cputime=320.531 memavail=1626680 print_time=7021.404 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 7011.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=4542752 bytes_read=2314334 bytes_retransmit=9 bytes_invalid=0 send_seq=128080 receive_seq=128068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=118 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=1488382 sysload=0.23 cputime=320.626 memavail=1626672 print_time=7022.585 buffer_time=2.380 print_stall=0 extruder: target=215 temp=215.1 pwm=0.425
Stats 7012.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4544601 bytes_read=2314901 bytes_retransmit=9 bytes_invalid=0 send_seq=128118 receive_seq=128118 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.450 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=1489900 sysload=0.23 cputime=320.699 memavail=1626484 print_time=7023.279 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.1 pwm=0.498
Stats 7013.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4546616 bytes_read=2315427 bytes_retransmit=9 bytes_invalid=0 send_seq=128160 receive_seq=128160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.553 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=1493430 sysload=0.23 cputime=320.798 memavail=1626672 print_time=7024.298 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 7014.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4549294 bytes_read=2315989 bytes_retransmit=9 bytes_invalid=0 send_seq=128215 receive_seq=128215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=1495057 sysload=0.21 cputime=320.892 memavail=1626684 print_time=7025.381 buffer_time=2.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 7015.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4549876 bytes_read=2316386 bytes_retransmit=9 bytes_invalid=0 send_seq=128231 receive_seq=128231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=54.9 pwm=0.429 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1495325 sysload=0.21 cputime=320.938 memavail=1626684 print_time=7026.346 buffer_time=2.139 print_stall=0 extruder: target=215 temp=215.3 pwm=0.269
Stats 7016.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4550527 bytes_read=2316777 bytes_retransmit=9 bytes_invalid=0 send_seq=128249 receive_seq=128249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=57.9 mcu_temp: temp=44.3 sd_pos=1495651 sysload=0.21 cputime=320.996 memavail=1626624 print_time=7027.526 buffer_time=2.318 print_stall=0 extruder: target=215 temp=215.2 pwm=0.360
Stats 7017.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4551096 bytes_read=2317154 bytes_retransmit=9 bytes_invalid=0 send_seq=128267 receive_seq=128267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=1495829 sysload=0.21 cputime=321.058 memavail=1626612 print_time=7028.278 buffer_time=2.069 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 7018.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000067 bytes_write=4551664 bytes_read=2317571 bytes_retransmit=9 bytes_invalid=0 send_seq=128284 receive_seq=128284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.064 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=1496108 sysload=0.21 cputime=321.123 memavail=1626676 print_time=7029.244 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.1 pwm=0.509
Stats 7019.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000067 bytes_write=4552394 bytes_read=2317982 bytes_retransmit=9 bytes_invalid=0 send_seq=128306 receive_seq=128306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=1496443 sysload=0.20 cputime=321.185 memavail=1626684 print_time=7030.424 buffer_time=2.214 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 7020.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000067 bytes_write=4554669 bytes_read=2318509 bytes_retransmit=9 bytes_invalid=0 send_seq=128354 receive_seq=128354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1498072 sysload=0.20 cputime=321.265 memavail=1626684 print_time=7031.546 buffer_time=2.334 print_stall=0 extruder: target=215 temp=215.2 pwm=0.380
Stats 7021.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000067 bytes_write=4556424 bytes_read=2319006 bytes_retransmit=9 bytes_invalid=0 send_seq=128390 receive_seq=128390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=58.4 mcu_temp: temp=44.4 sd_pos=1498449 sysload=0.20 cputime=321.328 memavail=1626628 print_time=7032.225 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.3 pwm=0.377
Stats 7022.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000027 mcu_task_stddev=0.000067 bytes_write=4558241 bytes_read=2319512 bytes_retransmit=9 bytes_invalid=0 send_seq=128431 receive_seq=128431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=54.9 pwm=0.715 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=1498757 sysload=0.20 cputime=321.391 memavail=1626936 print_time=7033.435 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.2 pwm=0.400
Stats 7023.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4559515 bytes_read=2319959 bytes_retransmit=9 bytes_invalid=0 send_seq=128460 receive_seq=128460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=1498971 sysload=0.20 cputime=321.455 memavail=1627192 print_time=7034.617 buffer_time=2.403 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 7024.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4560374 bytes_read=2320386 bytes_retransmit=9 bytes_invalid=0 send_seq=128482 receive_seq=128482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=1499186 sysload=0.18 cputime=321.512 memavail=1627388 print_time=7035.396 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 7025.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4561748 bytes_read=2320847 bytes_retransmit=9 bytes_invalid=0 send_seq=128514 receive_seq=128514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=1499463 sysload=0.18 cputime=321.558 memavail=1626404 print_time=7036.434 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.2 pwm=0.449
Stats 7026.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4562984 bytes_read=2321274 bytes_retransmit=9 bytes_invalid=0 send_seq=128542 receive_seq=128542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1499676 sysload=0.18 cputime=321.613 memavail=1626696 print_time=7037.502 buffer_time=2.287 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 7027.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=4563938 bytes_read=2321711 bytes_retransmit=9 bytes_invalid=0 send_seq=128566 receive_seq=128566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=1499799 sysload=0.18 cputime=321.671 memavail=1626696 print_time=7038.264 buffer_time=2.049 print_stall=0 extruder: target=215 temp=215.1 pwm=0.488
Stats 7028.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4565243 bytes_read=2322182 bytes_retransmit=9 bytes_invalid=0 send_seq=128597 receive_seq=128597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=1500043 sysload=0.18 cputime=321.730 memavail=1626452 print_time=7039.533 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.3 pwm=0.352
Stats 7029.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4566169 bytes_read=2322590 bytes_retransmit=9 bytes_invalid=0 send_seq=128622 receive_seq=128622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=1500197 sysload=0.17 cputime=321.788 memavail=1626452 print_time=7040.468 buffer_time=2.252 print_stall=0 extruder: target=215 temp=215.2 pwm=0.427
Stats 7030.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4567147 bytes_read=2323020 bytes_retransmit=9 bytes_invalid=0 send_seq=128647 receive_seq=128647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=1500320 sysload=0.17 cputime=321.845 memavail=1626704 print_time=7041.358 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.1 pwm=0.487
Stats 7031.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4568108 bytes_read=2323435 bytes_retransmit=9 bytes_invalid=0 send_seq=128672 receive_seq=128672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1500504 sysload=0.17 cputime=321.904 memavail=1626660 print_time=7042.221 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7032.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4569077 bytes_read=2323852 bytes_retransmit=9 bytes_invalid=0 send_seq=128700 receive_seq=128700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=1500659 sysload=0.17 cputime=321.962 memavail=1626716 print_time=7043.234 buffer_time=2.015 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 7033.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4570039 bytes_read=2324316 bytes_retransmit=9 bytes_invalid=0 send_seq=128727 receive_seq=128727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=1500782 sysload=0.17 cputime=322.015 memavail=1626976 print_time=7044.416 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 7034.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4570987 bytes_read=2324742 bytes_retransmit=9 bytes_invalid=0 send_seq=128752 receive_seq=128752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.450 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=1500906 sysload=0.15 cputime=322.065 memavail=1626780 print_time=7045.598 buffer_time=2.377 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 7035.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4571845 bytes_read=2325149 bytes_retransmit=9 bytes_invalid=0 send_seq=128776 receive_seq=128776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.7 sd_pos=1501059 sysload=0.15 cputime=322.108 memavail=1626480 print_time=7046.686 buffer_time=2.465 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 7036.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4572794 bytes_read=2325596 bytes_retransmit=9 bytes_invalid=0 send_seq=128802 receive_seq=128802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=1501242 sysload=0.15 cputime=322.164 memavail=1626676 print_time=7047.689 buffer_time=2.468 print_stall=0 extruder: target=215 temp=215.0 pwm=0.431
Stats 7037.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4575522 bytes_read=2326172 bytes_retransmit=9 bytes_invalid=0 send_seq=128857 receive_seq=128857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=1502489 sysload=0.15 cputime=322.240 memavail=1626480 print_time=7049.113 buffer_time=2.891 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 7038.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4577840 bytes_read=2326719 bytes_retransmit=9 bytes_invalid=0 send_seq=128906 receive_seq=128906 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.434 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=1504163 sysload=0.15 cputime=322.323 memavail=1626480 print_time=7049.756 buffer_time=2.534 print_stall=0 extruder: target=215 temp=214.9 pwm=0.456
Stats 7039.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4579709 bytes_read=2327241 bytes_retransmit=9 bytes_invalid=0 send_seq=128947 receive_seq=128947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.014 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=1504579 sysload=0.14 cputime=322.383 memavail=1626164 print_time=7050.475 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.7 pwm=0.551
Stats 7040.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4580902 bytes_read=2327687 bytes_retransmit=9 bytes_invalid=0 send_seq=128976 receive_seq=128976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=1504814 sysload=0.14 cputime=322.445 memavail=1626424 print_time=7051.418 buffer_time=2.195 print_stall=0 extruder: target=215 temp=214.7 pwm=0.561
Stats 7041.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4582474 bytes_read=2328144 bytes_retransmit=9 bytes_invalid=0 send_seq=129010 receive_seq=129010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.042 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1505143 sysload=0.14 cputime=322.507 memavail=1626432 print_time=7052.485 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.7 pwm=0.561
Stats 7042.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4583778 bytes_read=2328626 bytes_retransmit=9 bytes_invalid=0 send_seq=129043 receive_seq=129043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.8 pwm=0.561 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=1505350 sysload=0.14 cputime=322.567 memavail=1626656 print_time=7053.254 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.7 pwm=0.526
Stats 7043.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=4585259 bytes_read=2329122 bytes_retransmit=9 bytes_invalid=0 send_seq=129079 receive_seq=129079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.046 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=1505617 sysload=0.14 cputime=322.631 memavail=1626736 print_time=7054.473 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.7 pwm=0.463
Stats 7044.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=4586335 bytes_read=2329549 bytes_retransmit=9 bytes_invalid=0 send_seq=129107 receive_seq=129107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.106 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=1505824 sysload=0.13 cputime=322.694 memavail=1626132 print_time=7055.567 buffer_time=2.341 print_stall=0 extruder: target=215 temp=214.6 pwm=0.580
Stats 7045.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=4587215 bytes_read=2329986 bytes_retransmit=9 bytes_invalid=0 send_seq=129131 receive_seq=129131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=1505973 sysload=0.13 cputime=322.753 memavail=1626364 print_time=7056.374 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.7 pwm=0.488
Stats 7046.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=4588146 bytes_read=2330407 bytes_retransmit=9 bytes_invalid=0 send_seq=129155 receive_seq=129155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=1506093 sysload=0.13 cputime=322.795 memavail=1626508 print_time=7057.232 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.8 pwm=0.488
Stats 7047.5: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=4589292 bytes_read=2330844 bytes_retransmit=9 bytes_invalid=0 send_seq=129185 receive_seq=129185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=1506278 sysload=0.13 cputime=322.853 memavail=1626464 print_time=7058.605 buffer_time=2.377 print_stall=0 extruder: target=215 temp=214.9 pwm=0.435
Stats 7048.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4590268 bytes_read=2331301 bytes_retransmit=9 bytes_invalid=0 send_seq=129210 receive_seq=129210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=54.9 pwm=0.629 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=1506396 sysload=0.13 cputime=322.912 memavail=1626332 print_time=7059.695 buffer_time=2.466 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 7049.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4590984 bytes_read=2331722 bytes_retransmit=9 bytes_invalid=0 send_seq=129234 receive_seq=129234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=1506482 sysload=0.12 cputime=322.967 memavail=1626384 print_time=7060.250 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7050.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4591850 bytes_read=2332134 bytes_retransmit=9 bytes_invalid=0 send_seq=129259 receive_seq=129259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.284 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=1506630 sysload=0.12 cputime=323.025 memavail=1626140 print_time=7061.319 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.2 pwm=0.343
Stats 7051.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4592803 bytes_read=2332581 bytes_retransmit=9 bytes_invalid=0 send_seq=129285 receive_seq=129285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=1506749 sysload=0.12 cputime=323.082 memavail=1626148 print_time=7062.392 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.2 pwm=0.451
Stats 7052.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000021 mcu_task_stddev=0.000044 bytes_write=4593743 bytes_read=2333017 bytes_retransmit=9 bytes_invalid=0 send_seq=129312 receive_seq=129312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=1506899 sysload=0.12 cputime=323.141 memavail=1626140 print_time=7063.446 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.2 pwm=0.506
Stats 7053.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=4594612 bytes_read=2333444 bytes_retransmit=9 bytes_invalid=0 send_seq=129337 receive_seq=129337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=1507054 sysload=0.12 cputime=323.200 memavail=1625948 print_time=7064.364 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.2 pwm=0.451
Stats 7054.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=4596653 bytes_read=2333986 bytes_retransmit=9 bytes_invalid=0 send_seq=129382 receive_seq=129382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=1508135 sysload=0.11 cputime=323.273 memavail=1626392 print_time=7065.594 buffer_time=2.362 print_stall=0 extruder: target=215 temp=215.2 pwm=0.467
Stats 7055.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=4598437 bytes_read=2334482 bytes_retransmit=9 bytes_invalid=0 send_seq=129421 receive_seq=129421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=1508556 sysload=0.11 cputime=323.316 memavail=1626644 print_time=7066.403 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.3 pwm=0.453
Stats 7056.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=4600970 bytes_read=2335029 bytes_retransmit=9 bytes_invalid=0 send_seq=129473 receive_seq=129473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.661 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=1509462 sysload=0.11 cputime=323.382 memavail=1626596 print_time=7067.278 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.2 pwm=0.450
Stats 7057.5: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000057 bytes_write=4603730 bytes_read=2335631 bytes_retransmit=9 bytes_invalid=0 send_seq=129530 receive_seq=129530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=1510938 sysload=0.11 cputime=323.460 memavail=1626908 print_time=7068.238 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.0 pwm=0.561
Stats 7058.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4607671 bytes_read=2336317 bytes_retransmit=9 bytes_invalid=0 send_seq=129604 receive_seq=129604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=1512720 sysload=0.11 cputime=323.524 memavail=1626712 print_time=7069.579 buffer_time=2.346 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 7059.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4609768 bytes_read=2336829 bytes_retransmit=9 bytes_invalid=0 send_seq=129649 receive_seq=129649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.197 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=1514953 sysload=0.10 cputime=323.606 memavail=1627020 print_time=7070.394 buffer_time=2.160 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 7060.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4612321 bytes_read=2337406 bytes_retransmit=9 bytes_invalid=0 send_seq=129701 receive_seq=129701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.525 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1517220 sysload=0.10 cputime=323.696 memavail=1626720 print_time=7071.482 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 7061.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4614976 bytes_read=2337982 bytes_retransmit=9 bytes_invalid=0 send_seq=129756 receive_seq=129756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.231 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=1518771 sysload=0.10 cputime=323.773 memavail=1626468 print_time=7072.429 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 7062.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=4617107 bytes_read=2338489 bytes_retransmit=9 bytes_invalid=0 send_seq=129800 receive_seq=129800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.771 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=1519743 sysload=0.10 cputime=323.845 memavail=1626528 print_time=7073.328 buffer_time=2.093 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 7063.5: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=4619698 bytes_read=2339072 bytes_retransmit=9 bytes_invalid=0 send_seq=129850 receive_seq=129850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.027 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1521497 sysload=0.10 cputime=323.930 memavail=1626400 print_time=7074.580 buffer_time=2.344 print_stall=0 extruder: target=215 temp=214.7 pwm=0.605
Stats 7064.5: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=4620756 bytes_read=2339503 bytes_retransmit=9 bytes_invalid=0 send_seq=129876 receive_seq=129876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=1521845 sysload=0.09 cputime=323.990 memavail=1626480 print_time=7075.391 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 7065.5: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=4622025 bytes_read=2339945 bytes_retransmit=9 bytes_invalid=0 send_seq=129907 receive_seq=129907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.207 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=1522589 sysload=0.09 cputime=324.038 memavail=1626676 print_time=7076.473 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.1 pwm=0.357
Stats 7066.5: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=4624127 bytes_read=2340497 bytes_retransmit=9 bytes_invalid=0 send_seq=129954 receive_seq=129954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=1524281 sysload=0.09 cputime=324.118 memavail=1626536 print_time=7077.306 buffer_time=2.069 print_stall=0 extruder: target=215 temp=215.0 pwm=0.458
Stats 7067.5: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=4626468 bytes_read=2341038 bytes_retransmit=9 bytes_invalid=0 send_seq=130002 receive_seq=130002 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.606 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=1526608 sysload=0.09 cputime=324.205 memavail=1626156 print_time=7078.365 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 7068.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4628366 bytes_read=2341545 bytes_retransmit=9 bytes_invalid=0 send_seq=130043 receive_seq=130043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=1527883 sysload=0.09 cputime=324.279 memavail=1626512 print_time=7079.247 buffer_time=2.009 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 7069.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4629902 bytes_read=2342032 bytes_retransmit=9 bytes_invalid=0 send_seq=130077 receive_seq=130077 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.401 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=1529780 sysload=0.16 cputime=324.368 memavail=1626480 print_time=7080.270 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 7070.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4630847 bytes_read=2342458 bytes_retransmit=9 bytes_invalid=0 send_seq=130102 receive_seq=130102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1530119 sysload=0.16 cputime=324.417 memavail=1626760 print_time=7081.485 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 7071.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4632681 bytes_read=2342961 bytes_retransmit=9 bytes_invalid=0 send_seq=130143 receive_seq=130143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.344 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1531292 sysload=0.16 cputime=324.494 memavail=1626812 print_time=7082.605 buffer_time=2.364 print_stall=0 extruder: target=215 temp=215.2 pwm=0.352
Stats 7072.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=4634131 bytes_read=2343438 bytes_retransmit=9 bytes_invalid=0 send_seq=130175 receive_seq=130175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=1532050 sysload=0.16 cputime=324.565 memavail=1626796 print_time=7083.259 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 7073.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4636641 bytes_read=2343999 bytes_retransmit=9 bytes_invalid=0 send_seq=130224 receive_seq=130224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.193 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=1534372 sysload=0.16 cputime=324.657 memavail=1626696 print_time=7084.402 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.453
Stats 7074.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4638152 bytes_read=2344456 bytes_retransmit=9 bytes_invalid=0 send_seq=130258 receive_seq=130258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=1536238 sysload=0.15 cputime=324.718 memavail=1626968 print_time=7085.351 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.0 pwm=0.532
Stats 7075.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4639226 bytes_read=2344908 bytes_retransmit=9 bytes_invalid=0 send_seq=130285 receive_seq=130285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.190 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=1536499 sysload=0.15 cputime=324.765 memavail=1626384 print_time=7086.376 buffer_time=2.132 print_stall=0 extruder: target=215 temp=215.1 pwm=0.506
Stats 7076.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4640474 bytes_read=2345359 bytes_retransmit=9 bytes_invalid=0 send_seq=130315 receive_seq=130315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=1537684 sysload=0.15 cputime=324.834 memavail=1626480 print_time=7087.448 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 7077.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4642345 bytes_read=2345846 bytes_retransmit=9 bytes_invalid=0 send_seq=130355 receive_seq=130355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.201 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1539401 sysload=0.15 cputime=324.913 memavail=1626448 print_time=7088.244 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.2 pwm=0.358
Stats 7078.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4644776 bytes_read=2346433 bytes_retransmit=9 bytes_invalid=0 send_seq=130406 receive_seq=130406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.785 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=1542030 sysload=0.15 cputime=325.011 memavail=1626932 print_time=7089.330 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 7079.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4647120 bytes_read=2346969 bytes_retransmit=9 bytes_invalid=0 send_seq=130453 receive_seq=130453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=1544816 sysload=0.22 cputime=325.106 memavail=1626964 print_time=7090.401 buffer_time=2.155 print_stall=0 extruder: target=215 temp=214.9 pwm=0.556
Stats 7080.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4649248 bytes_read=2347481 bytes_retransmit=9 bytes_invalid=0 send_seq=130498 receive_seq=130498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1546471 sysload=0.22 cputime=325.187 memavail=1626972 print_time=7091.468 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 7081.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4649973 bytes_read=2347913 bytes_retransmit=9 bytes_invalid=0 send_seq=130521 receive_seq=130521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.155 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=1546741 sysload=0.22 cputime=325.250 memavail=1627216 print_time=7092.512 buffer_time=2.265 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 7082.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4651991 bytes_read=2348434 bytes_retransmit=9 bytes_invalid=0 send_seq=130565 receive_seq=130565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=59.4 mcu_temp: temp=43.5 sd_pos=1548976 sysload=0.22 cputime=325.317 memavail=1627144 print_time=7093.484 buffer_time=2.237 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 7083.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4653782 bytes_read=2348932 bytes_retransmit=9 bytes_invalid=0 send_seq=130604 receive_seq=130604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=1550559 sysload=0.22 cputime=325.372 memavail=1626964 print_time=7094.285 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 7084.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4656523 bytes_read=2349534 bytes_retransmit=9 bytes_invalid=0 send_seq=130661 receive_seq=130661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1551505 sysload=0.20 cputime=325.439 memavail=1627208 print_time=7095.303 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 7085.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4659399 bytes_read=2350120 bytes_retransmit=9 bytes_invalid=0 send_seq=130718 receive_seq=130718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=1552977 sysload=0.20 cputime=325.519 memavail=1626984 print_time=7096.524 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.0 pwm=0.412
Stats 7086.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4660908 bytes_read=2350582 bytes_retransmit=9 bytes_invalid=0 send_seq=130753 receive_seq=130753 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.031 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=1555382 sysload=0.20 cputime=325.609 memavail=1626488 print_time=7097.309 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.1 pwm=0.390
Stats 7087.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4664073 bytes_read=2351214 bytes_retransmit=9 bytes_invalid=0 send_seq=130816 receive_seq=130816 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=1558390 sysload=0.20 cputime=325.712 memavail=1626736 print_time=7098.620 buffer_time=2.369 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 7088.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4665600 bytes_read=2351711 bytes_retransmit=9 bytes_invalid=0 send_seq=130852 receive_seq=130852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=1560261 sysload=0.20 cputime=325.792 memavail=1626768 print_time=7099.410 buffer_time=2.159 print_stall=0 extruder: target=215 temp=215.0 pwm=0.409
Stats 7089.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4668139 bytes_read=2352254 bytes_retransmit=9 bytes_invalid=0 send_seq=130905 receive_seq=130905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.152 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=1561618 sysload=0.27 cputime=325.870 memavail=1626736 print_time=7100.362 buffer_time=2.110 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 7090.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4670111 bytes_read=2352774 bytes_retransmit=9 bytes_invalid=0 send_seq=130948 receive_seq=130948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.167 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=1563981 sysload=0.27 cputime=325.961 memavail=1626684 print_time=7101.404 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 7091.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4672292 bytes_read=2353294 bytes_retransmit=9 bytes_invalid=0 send_seq=130994 receive_seq=130994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=59.9 mcu_temp: temp=43.6 sd_pos=1565835 sysload=0.27 cputime=326.024 memavail=1626428 print_time=7102.293 buffer_time=2.041 print_stall=0 extruder: target=215 temp=215.0 pwm=0.425
Stats 7092.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4675188 bytes_read=2353866 bytes_retransmit=9 bytes_invalid=0 send_seq=131053 receive_seq=131053 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.5 sd_pos=1568344 sysload=0.27 cputime=326.121 memavail=1626360 print_time=7103.651 buffer_time=2.398 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 7093.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4676639 bytes_read=2354374 bytes_retransmit=9 bytes_invalid=0 send_seq=131088 receive_seq=131088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.358 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=1569590 sysload=0.27 cputime=326.194 memavail=1626436 print_time=7104.404 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.7 pwm=0.669
Stats 7094.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4678221 bytes_read=2354860 bytes_retransmit=9 bytes_invalid=0 send_seq=131125 receive_seq=131125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.073 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=1571198 sysload=0.32 cputime=326.276 memavail=1626436 print_time=7105.348 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 7095.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4679969 bytes_read=2355352 bytes_retransmit=9 bytes_invalid=0 send_seq=131166 receive_seq=131166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.239 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=1573221 sysload=0.32 cputime=326.360 memavail=1626688 print_time=7106.414 buffer_time=2.158 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 7096.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4682110 bytes_read=2355899 bytes_retransmit=9 bytes_invalid=0 send_seq=131212 receive_seq=131212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=1575055 sysload=0.32 cputime=326.442 memavail=1627124 print_time=7107.369 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.2 pwm=0.337
Stats 7097.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4683664 bytes_read=2356380 bytes_retransmit=9 bytes_invalid=0 send_seq=131248 receive_seq=131248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.028 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=1576002 sysload=0.32 cputime=326.515 memavail=1626968 print_time=7108.560 buffer_time=2.303 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 7098.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4684235 bytes_read=2356777 bytes_retransmit=9 bytes_invalid=0 send_seq=131267 receive_seq=131267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1576171 sysload=0.32 cputime=326.574 memavail=1627220 print_time=7109.514 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.0 pwm=0.450
Stats 7099.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4684909 bytes_read=2357204 bytes_retransmit=9 bytes_invalid=0 send_seq=131289 receive_seq=131289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=1576345 sysload=0.30 cputime=326.632 memavail=1627220 print_time=7110.469 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 7100.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4685454 bytes_read=2357600 bytes_retransmit=9 bytes_invalid=0 send_seq=131308 receive_seq=131308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=1576521 sysload=0.30 cputime=326.691 memavail=1627472 print_time=7111.423 buffer_time=2.165 print_stall=0 extruder: target=215 temp=214.9 pwm=0.544
Stats 7101.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4686059 bytes_read=2357987 bytes_retransmit=9 bytes_invalid=0 send_seq=131328 receive_seq=131328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=1576696 sysload=0.30 cputime=326.748 memavail=1627212 print_time=7112.377 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.2 pwm=0.363
Stats 7102.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=4687345 bytes_read=2358464 bytes_retransmit=9 bytes_invalid=0 send_seq=131360 receive_seq=131360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1577560 sysload=0.30 cputime=326.821 memavail=1627228 print_time=7113.558 buffer_time=2.298 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 7103.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=4688922 bytes_read=2358960 bytes_retransmit=9 bytes_invalid=0 send_seq=131396 receive_seq=131396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=1579729 sysload=0.30 cputime=326.909 memavail=1627412 print_time=7114.354 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 7104.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=4690808 bytes_read=2359452 bytes_retransmit=9 bytes_invalid=0 send_seq=131437 receive_seq=131437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=1582392 sysload=0.35 cputime=327.001 memavail=1627224 print_time=7115.468 buffer_time=2.207 print_stall=0 extruder: target=215 temp=215.3 pwm=0.338
Stats 7105.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=4691769 bytes_read=2359899 bytes_retransmit=9 bytes_invalid=0 send_seq=131463 receive_seq=131463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1582541 sysload=0.35 cputime=327.061 memavail=1626696 print_time=7116.487 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.0 pwm=0.557
Stats 7106.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=4692790 bytes_read=2360340 bytes_retransmit=9 bytes_invalid=0 send_seq=131491 receive_seq=131491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=1582720 sysload=0.35 cputime=327.119 memavail=1626468 print_time=7117.692 buffer_time=2.429 print_stall=0 extruder: target=215 temp=215.1 pwm=0.502
Stats 7107.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000024 mcu_task_stddev=0.000066 bytes_write=4693747 bytes_read=2360762 bytes_retransmit=9 bytes_invalid=0 send_seq=131518 receive_seq=131518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=59.9 mcu_temp: temp=43.3 sd_pos=1582863 sysload=0.35 cputime=327.178 memavail=1626720 print_time=7118.830 buffer_time=2.567 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 7108.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4694319 bytes_read=2361189 bytes_retransmit=9 bytes_invalid=0 send_seq=131537 receive_seq=131537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1582952 sysload=0.35 cputime=327.236 memavail=1626696 print_time=7119.426 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 7109.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4695328 bytes_read=2361630 bytes_retransmit=9 bytes_invalid=0 send_seq=131565 receive_seq=131565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.142 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1583105 sysload=0.33 cputime=327.298 memavail=1626732 print_time=7120.658 buffer_time=2.393 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 7110.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4696037 bytes_read=2362022 bytes_retransmit=9 bytes_invalid=0 send_seq=131586 receive_seq=131586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=59.9 mcu_temp: temp=43.6 sd_pos=1583165 sysload=0.33 cputime=327.350 memavail=1627044 print_time=7121.294 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.523
Stats 7111.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4697028 bytes_read=2362469 bytes_retransmit=9 bytes_invalid=0 send_seq=131612 receive_seq=131612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=1583348 sysload=0.33 cputime=327.407 memavail=1627040 print_time=7122.490 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 7112.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000052 bytes_write=4698025 bytes_read=2362900 bytes_retransmit=9 bytes_invalid=0 send_seq=131638 receive_seq=131638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=1583501 sysload=0.33 cputime=327.467 memavail=1627024 print_time=7123.680 buffer_time=2.414 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 7113.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=4698963 bytes_read=2363332 bytes_retransmit=9 bytes_invalid=0 send_seq=131664 receive_seq=131664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.411 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1583685 sysload=0.33 cputime=327.523 memavail=1627280 print_time=7124.545 buffer_time=2.279 print_stall=0 extruder: target=215 temp=215.1 pwm=0.483
Stats 7114.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=4699932 bytes_read=2363779 bytes_retransmit=9 bytes_invalid=0 send_seq=131690 receive_seq=131690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=1583838 sysload=0.30 cputime=327.581 memavail=1627284 print_time=7125.358 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 7115.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=4701256 bytes_read=2364240 bytes_retransmit=9 bytes_invalid=0 send_seq=131722 receive_seq=131722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=1584055 sysload=0.30 cputime=327.641 memavail=1627768 print_time=7126.508 buffer_time=2.240 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 7116.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=4702504 bytes_read=2364687 bytes_retransmit=9 bytes_invalid=0 send_seq=131754 receive_seq=131754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.273 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=1584274 sysload=0.30 cputime=327.703 memavail=1627512 print_time=7127.586 buffer_time=2.318 print_stall=0 extruder: target=215 temp=214.9 pwm=0.558
Stats 7117.6: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000021 mcu_task_stddev=0.000053 bytes_write=4704158 bytes_read=2365208 bytes_retransmit=9 bytes_invalid=0 send_seq=131792 receive_seq=131792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.389 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=1584553 sysload=0.30 cputime=327.765 memavail=1627724 print_time=7128.535 buffer_time=2.266 print_stall=0 extruder: target=215 temp=214.8 pwm=0.551
Stats 7118.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4705422 bytes_read=2365660 bytes_retransmit=9 bytes_invalid=0 send_seq=131822 receive_seq=131822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.424 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1584796 sysload=0.30 cputime=327.826 memavail=1627768 print_time=7129.297 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.0 pwm=0.389
Stats 7119.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4707234 bytes_read=2366137 bytes_retransmit=9 bytes_invalid=0 send_seq=131860 receive_seq=131860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.7 sd_pos=1585225 sysload=0.36 cputime=327.890 memavail=1627768 print_time=7130.404 buffer_time=2.134 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 7120.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4709979 bytes_read=2366758 bytes_retransmit=9 bytes_invalid=0 send_seq=131918 receive_seq=131918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.097 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=1586452 sysload=0.36 cputime=327.949 memavail=1628172 print_time=7131.300 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 7121.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4713684 bytes_read=2367410 bytes_retransmit=9 bytes_invalid=0 send_seq=131991 receive_seq=131991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.325 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=1587899 sysload=0.36 cputime=328.022 memavail=1628084 print_time=7132.441 buffer_time=2.169 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 7122.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4714716 bytes_read=2367837 bytes_retransmit=9 bytes_invalid=0 send_seq=132019 receive_seq=132019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=1588016 sysload=0.36 cputime=328.083 memavail=1628148 print_time=7133.454 buffer_time=2.182 print_stall=0 extruder: target=215 temp=214.9 pwm=0.481
Stats 7123.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=4715654 bytes_read=2368319 bytes_retransmit=9 bytes_invalid=0 send_seq=132046 receive_seq=132046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.6 sd_pos=1588136 sysload=0.36 cputime=328.147 memavail=1627588 print_time=7134.284 buffer_time=2.010 print_stall=0 extruder: target=215 temp=214.8 pwm=0.475
Stats 7124.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=4716725 bytes_read=2368736 bytes_retransmit=9 bytes_invalid=0 send_seq=132072 receive_seq=132072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=1588314 sysload=0.33 cputime=328.208 memavail=1627472 print_time=7135.476 buffer_time=2.202 print_stall=0 extruder: target=215 temp=214.8 pwm=0.566
Stats 7125.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=4718012 bytes_read=2369178 bytes_retransmit=9 bytes_invalid=0 send_seq=132103 receive_seq=132103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1588522 sysload=0.33 cputime=328.253 memavail=1627092 print_time=7136.612 buffer_time=2.337 print_stall=0 extruder: target=215 temp=214.9 pwm=0.386
Stats 7126.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=4718966 bytes_read=2369629 bytes_retransmit=9 bytes_invalid=0 send_seq=132127 receive_seq=132127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=1588641 sysload=0.33 cputime=328.306 memavail=1626664 print_time=7137.324 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.8 pwm=0.513
Stats 7127.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=4720151 bytes_read=2370056 bytes_retransmit=9 bytes_invalid=0 send_seq=132155 receive_seq=132155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.035 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1588850 sysload=0.33 cputime=328.366 memavail=1626948 print_time=7138.313 buffer_time=2.036 print_stall=0 extruder: target=215 temp=214.9 pwm=0.408
Stats 7128.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4721691 bytes_read=2370533 bytes_retransmit=9 bytes_invalid=0 send_seq=132190 receive_seq=132190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.406 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=1589207 sysload=0.33 cputime=328.430 memavail=1627036 print_time=7139.474 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.9 pwm=0.448
Stats 7129.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4723289 bytes_read=2371049 bytes_retransmit=9 bytes_invalid=0 send_seq=132227 receive_seq=132227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1589446 sysload=0.30 cputime=328.493 memavail=1626696 print_time=7140.467 buffer_time=2.189 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 7130.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4725995 bytes_read=2371606 bytes_retransmit=9 bytes_invalid=0 send_seq=132281 receive_seq=132281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.378 rpi: temp=59.9 mcu_temp: temp=43.7 sd_pos=1590097 sysload=0.30 cputime=328.558 memavail=1626428 print_time=7141.696 buffer_time=2.419 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 7131.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4728507 bytes_read=2372163 bytes_retransmit=9 bytes_invalid=0 send_seq=132332 receive_seq=132332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=10 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1591571 sysload=0.30 cputime=328.625 memavail=1626580 print_time=7142.499 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 7132.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000052 bytes_write=4731213 bytes_read=2372765 bytes_retransmit=9 bytes_invalid=0 send_seq=132387 receive_seq=132387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1592282 sysload=0.30 cputime=328.694 memavail=1627084 print_time=7143.417 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.1 pwm=0.374
Stats 7133.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000044 bytes_write=4734405 bytes_read=2373368 bytes_retransmit=9 bytes_invalid=0 send_seq=132447 receive_seq=132447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.033 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1593954 sysload=0.30 cputime=328.773 memavail=1627088 print_time=7144.751 buffer_time=2.471 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 7134.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000044 bytes_write=4737284 bytes_read=2373965 bytes_retransmit=9 bytes_invalid=0 send_seq=132506 receive_seq=132506 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.108 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=1595105 sysload=0.28 cputime=328.847 memavail=1627404 print_time=7145.638 buffer_time=2.358 print_stall=0 extruder: target=215 temp=215.1 pwm=0.374
Stats 7135.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000044 bytes_write=4739249 bytes_read=2374486 bytes_retransmit=9 bytes_invalid=0 send_seq=132547 receive_seq=132547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1595730 sysload=0.28 cputime=328.897 memavail=1627468 print_time=7146.495 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 7136.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000044 bytes_write=4740519 bytes_read=2374923 bytes_retransmit=9 bytes_invalid=0 send_seq=132577 receive_seq=132577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.419 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1595880 sysload=0.28 cputime=328.952 memavail=1627344 print_time=7147.773 buffer_time=2.492 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 7137.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000044 bytes_write=4741195 bytes_read=2375335 bytes_retransmit=9 bytes_invalid=0 send_seq=132599 receive_seq=132599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=58.4 mcu_temp: temp=44.1 sd_pos=1595968 sysload=0.28 cputime=329.008 memavail=1627288 print_time=7148.332 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 7138.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4742059 bytes_read=2375776 bytes_retransmit=9 bytes_invalid=0 send_seq=132621 receive_seq=132621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.9 pwm=0.553 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1596147 sysload=0.28 cputime=329.070 memavail=1627352 print_time=7149.396 buffer_time=2.113 print_stall=0 extruder: target=215 temp=215.2 pwm=0.376
Stats 7139.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4742973 bytes_read=2376193 bytes_retransmit=9 bytes_invalid=0 send_seq=132647 receive_seq=132647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1596293 sysload=0.25 cputime=329.115 memavail=1627336 print_time=7150.398 buffer_time=2.115 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 7140.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4744533 bytes_read=2376675 bytes_retransmit=9 bytes_invalid=0 send_seq=132683 receive_seq=132683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.424 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1597177 sysload=0.25 cputime=329.183 memavail=1627048 print_time=7151.586 buffer_time=2.303 print_stall=0 extruder: target=215 temp=215.2 pwm=0.390
Stats 7141.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4746583 bytes_read=2377206 bytes_retransmit=9 bytes_invalid=0 send_seq=132726 receive_seq=132726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=1599084 sysload=0.25 cputime=329.270 memavail=1627040 print_time=7152.488 buffer_time=2.203 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 7142.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4749082 bytes_read=2377733 bytes_retransmit=9 bytes_invalid=0 send_seq=132774 receive_seq=132774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1601350 sysload=0.25 cputime=329.358 memavail=1626944 print_time=7153.572 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 7143.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=4751600 bytes_read=2378295 bytes_retransmit=9 bytes_invalid=0 send_seq=132823 receive_seq=132823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.377 rpi: temp=60.4 mcu_temp: temp=43.8 sd_pos=1602901 sysload=0.25 cputime=329.437 memavail=1627056 print_time=7154.488 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 7144.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=4753796 bytes_read=2378836 bytes_retransmit=9 bytes_invalid=0 send_seq=132868 receive_seq=132868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=1603875 sysload=0.23 cputime=329.507 memavail=1626732 print_time=7155.387 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 7145.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=4756322 bytes_read=2379373 bytes_retransmit=9 bytes_invalid=0 send_seq=132918 receive_seq=132918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.117 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1605631 sysload=0.23 cputime=329.566 memavail=1626480 print_time=7156.639 buffer_time=2.353 print_stall=0 extruder: target=215 temp=215.1 pwm=0.436
Stats 7146.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=4757263 bytes_read=2379795 bytes_retransmit=9 bytes_invalid=0 send_seq=132942 receive_seq=132942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1605983 sysload=0.23 cputime=329.620 memavail=1627064 print_time=7157.399 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 7147.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=4758594 bytes_read=2380266 bytes_retransmit=9 bytes_invalid=0 send_seq=132973 receive_seq=132973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.061 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=1606779 sysload=0.23 cputime=329.688 memavail=1627380 print_time=7158.479 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 7148.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4760577 bytes_read=2380775 bytes_retransmit=9 bytes_invalid=0 send_seq=133015 receive_seq=133015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.606 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=1608469 sysload=0.23 cputime=329.769 memavail=1626788 print_time=7159.296 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 7149.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4762979 bytes_read=2381310 bytes_retransmit=9 bytes_invalid=0 send_seq=133064 receive_seq=133064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=59.9 mcu_temp: temp=43.7 sd_pos=1610884 sysload=0.21 cputime=329.862 memavail=1627000 print_time=7160.404 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.1 pwm=0.389
Stats 7150.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4764906 bytes_read=2381809 bytes_retransmit=9 bytes_invalid=0 send_seq=133103 receive_seq=133103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.247 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=1612187 sysload=0.21 cputime=329.937 memavail=1627316 print_time=7161.296 buffer_time=2.007 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 7151.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4766682 bytes_read=2382276 bytes_retransmit=9 bytes_invalid=0 send_seq=133141 receive_seq=133141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1614047 sysload=0.21 cputime=330.019 memavail=1627252 print_time=7162.642 buffer_time=2.353 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 7152.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=4767330 bytes_read=2382676 bytes_retransmit=9 bytes_invalid=0 send_seq=133162 receive_seq=133162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=1614331 sysload=0.21 cputime=330.079 memavail=1627492 print_time=7163.549 buffer_time=2.259 print_stall=0 extruder: target=215 temp=215.0 pwm=0.431
Stats 7153.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=4769205 bytes_read=2383207 bytes_retransmit=9 bytes_invalid=0 send_seq=133202 receive_seq=133202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1615532 sysload=0.21 cputime=330.135 memavail=1627304 print_time=7164.605 buffer_time=2.315 print_stall=0 extruder: target=215 temp=214.8 pwm=0.580
Stats 7154.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=4771023 bytes_read=2383699 bytes_retransmit=9 bytes_invalid=0 send_seq=133243 receive_seq=133243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.1 pwm=0.139 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=1616610 sysload=0.20 cputime=330.212 memavail=1626668 print_time=7165.344 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 7155.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=4773554 bytes_read=2384261 bytes_retransmit=9 bytes_invalid=0 send_seq=133295 receive_seq=133295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=60.4 mcu_temp: temp=43.9 sd_pos=1618790 sysload=0.20 cputime=330.306 memavail=1627072 print_time=7166.410 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.9 pwm=0.429
Stats 7156.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=4774989 bytes_read=2384727 bytes_retransmit=9 bytes_invalid=0 send_seq=133325 receive_seq=133325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1620360 sysload=0.20 cputime=330.387 memavail=1627140 print_time=7167.419 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 7157.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=4775673 bytes_read=2385114 bytes_retransmit=9 bytes_invalid=0 send_seq=133345 receive_seq=133345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.064 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=1620682 sysload=0.20 cputime=330.446 memavail=1627080 print_time=7168.448 buffer_time=2.155 print_stall=0 extruder: target=215 temp=214.8 pwm=0.549
Stats 7158.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=4777141 bytes_read=2385611 bytes_retransmit=9 bytes_invalid=0 send_seq=133381 receive_seq=133381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.148 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1622178 sysload=0.20 cputime=330.524 memavail=1627012 print_time=7169.406 buffer_time=2.112 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 7159.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=4779486 bytes_read=2386162 bytes_retransmit=9 bytes_invalid=0 send_seq=133428 receive_seq=133428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.619 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=1624508 sysload=0.18 cputime=330.615 memavail=1626516 print_time=7170.490 buffer_time=2.197 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 7160.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=4781999 bytes_read=2386664 bytes_retransmit=9 bytes_invalid=0 send_seq=133479 receive_seq=133471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.555 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1627576 sysload=0.18 cputime=330.711 memavail=1626764 print_time=7171.553 buffer_time=2.251 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 7161.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=4783895 bytes_read=2387216 bytes_retransmit=9 bytes_invalid=0 send_seq=133521 receive_seq=133521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=1629427 sysload=0.18 cputime=330.793 memavail=1627320 print_time=7172.345 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.0 pwm=0.411
Stats 7162.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4785759 bytes_read=2387743 bytes_retransmit=9 bytes_invalid=0 send_seq=133560 receive_seq=133560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.007 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1630656 sysload=0.18 cputime=330.872 memavail=1626648 print_time=7173.482 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.9 pwm=0.489
Stats 7163.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4786752 bytes_read=2388155 bytes_retransmit=9 bytes_invalid=0 send_seq=133585 receive_seq=133585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=1631446 sysload=0.18 cputime=330.939 memavail=1626964 print_time=7174.597 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 7164.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4788722 bytes_read=2388662 bytes_retransmit=9 bytes_invalid=0 send_seq=133626 receive_seq=133626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=1633654 sysload=0.17 cputime=331.028 memavail=1626640 print_time=7175.408 buffer_time=2.104 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 7165.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4792541 bytes_read=2389333 bytes_retransmit=9 bytes_invalid=0 send_seq=133697 receive_seq=133697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.102 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1635659 sysload=0.17 cputime=331.094 memavail=1626696 print_time=7177.050 buffer_time=2.745 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 7166.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4793609 bytes_read=2389760 bytes_retransmit=9 bytes_invalid=0 send_seq=133725 receive_seq=133725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=59.9 mcu_temp: temp=43.6 sd_pos=1636064 sysload=0.17 cputime=331.149 memavail=1626452 print_time=7177.373 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.1 pwm=0.375
Stats 7167.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4796083 bytes_read=2390328 bytes_retransmit=9 bytes_invalid=0 send_seq=133775 receive_seq=133775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1637973 sysload=0.17 cputime=331.231 memavail=1626452 print_time=7178.491 buffer_time=2.185 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 7168.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4798015 bytes_read=2390839 bytes_retransmit=9 bytes_invalid=0 send_seq=133814 receive_seq=133814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1640905 sysload=0.17 cputime=331.329 memavail=1626704 print_time=7179.550 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.8 pwm=0.497
Stats 7169.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4800387 bytes_read=2391366 bytes_retransmit=9 bytes_invalid=0 send_seq=133862 receive_seq=133862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.122 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1642873 sysload=0.15 cputime=331.417 memavail=1627064 print_time=7180.366 buffer_time=2.059 print_stall=0 extruder: target=215 temp=214.9 pwm=0.414
Stats 7170.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4802287 bytes_read=2391883 bytes_retransmit=9 bytes_invalid=0 send_seq=133902 receive_seq=133902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1645079 sysload=0.15 cputime=331.483 memavail=1627268 print_time=7181.493 buffer_time=2.185 print_stall=0 extruder: target=215 temp=214.7 pwm=0.602
Stats 7171.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4804884 bytes_read=2392439 bytes_retransmit=9 bytes_invalid=0 send_seq=133953 receive_seq=133953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1646745 sysload=0.15 cputime=331.544 memavail=1627564 print_time=7182.533 buffer_time=2.225 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 7172.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=4806765 bytes_read=2392866 bytes_retransmit=9 bytes_invalid=0 send_seq=133993 receive_seq=133981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.335 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1648800 sysload=0.15 cputime=331.600 memavail=1627280 print_time=7183.804 buffer_time=2.494 print_stall=0 extruder: target=215 temp=214.9 pwm=0.451
Stats 7173.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=4808084 bytes_read=2393414 bytes_retransmit=9 bytes_invalid=0 send_seq=134024 receive_seq=134024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=1650379 sysload=0.15 cputime=331.673 memavail=1627540 print_time=7184.584 buffer_time=2.272 print_stall=0 extruder: target=215 temp=214.7 pwm=0.592
Stats 7174.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=4809670 bytes_read=2393885 bytes_retransmit=9 bytes_invalid=0 send_seq=134058 receive_seq=134058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=60.9 mcu_temp: temp=43.8 sd_pos=1651983 sysload=0.14 cputime=331.750 memavail=1627508 print_time=7185.370 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 7175.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=4812088 bytes_read=2394427 bytes_retransmit=9 bytes_invalid=0 send_seq=134109 receive_seq=134109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=60.4 mcu_temp: temp=43.9 sd_pos=1654914 sysload=0.14 cputime=331.851 memavail=1627532 print_time=7186.392 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.8 pwm=0.521
Stats 7176.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=4813879 bytes_read=2394939 bytes_retransmit=9 bytes_invalid=0 send_seq=134148 receive_seq=134148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=59.9 mcu_temp: temp=43.3 sd_pos=1657004 sysload=0.14 cputime=331.935 memavail=1627460 print_time=7187.599 buffer_time=2.285 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 7177.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=4814479 bytes_read=2395330 bytes_retransmit=9 bytes_invalid=0 send_seq=134166 receive_seq=134166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.526 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1657210 sysload=0.14 cputime=331.997 memavail=1627248 print_time=7188.413 buffer_time=2.098 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 7178.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=4815108 bytes_read=2395742 bytes_retransmit=9 bytes_invalid=0 send_seq=134188 receive_seq=134188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1657419 sysload=0.14 cputime=332.059 memavail=1627168 print_time=7189.353 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 7179.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=4816596 bytes_read=2396229 bytes_retransmit=9 bytes_invalid=0 send_seq=134222 receive_seq=134222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.141 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1658964 sysload=0.21 cputime=332.139 memavail=1626980 print_time=7190.365 buffer_time=2.048 print_stall=0 extruder: target=215 temp=215.1 pwm=0.362
Stats 7180.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=4818671 bytes_read=2396750 bytes_retransmit=9 bytes_invalid=0 send_seq=134266 receive_seq=134266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1660575 sysload=0.21 cputime=332.225 memavail=1626980 print_time=7191.522 buffer_time=2.206 print_stall=0 extruder: target=215 temp=214.9 pwm=0.580
Stats 7181.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=4820579 bytes_read=2397242 bytes_retransmit=9 bytes_invalid=0 send_seq=134307 receive_seq=134307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1662964 sysload=0.21 cputime=332.320 memavail=1626728 print_time=7192.564 buffer_time=2.246 print_stall=0 extruder: target=215 temp=214.9 pwm=0.612
Stats 7182.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=4821458 bytes_read=2397684 bytes_retransmit=9 bytes_invalid=0 send_seq=134332 receive_seq=134332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.9 pwm=0.404 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1663393 sysload=0.21 cputime=332.384 memavail=1626728 print_time=7193.362 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.3 pwm=0.258
Stats 7183.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=4822128 bytes_read=2398105 bytes_retransmit=9 bytes_invalid=0 send_seq=134353 receive_seq=134353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.229 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=1663667 sysload=0.21 cputime=332.447 memavail=1627240 print_time=7194.490 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.3 pwm=0.352
Stats 7184.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=4823560 bytes_read=2398577 bytes_retransmit=9 bytes_invalid=0 send_seq=134390 receive_seq=134390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1665353 sysload=0.19 cputime=332.523 memavail=1627296 print_time=7195.525 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.0 pwm=0.588
Stats 7185.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=4825069 bytes_read=2399059 bytes_retransmit=9 bytes_invalid=0 send_seq=134423 receive_seq=134423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1665858 sysload=0.19 cputime=332.573 memavail=1627804 print_time=7196.422 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.2 pwm=0.368
Stats 7186.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=4827384 bytes_read=2399595 bytes_retransmit=9 bytes_invalid=0 send_seq=134470 receive_seq=134470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1666478 sysload=0.19 cputime=332.631 memavail=1627556 print_time=7197.637 buffer_time=2.316 print_stall=0 extruder: target=215 temp=215.2 pwm=0.464
Stats 7187.6: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000059 bytes_write=4830718 bytes_read=2400212 bytes_retransmit=9 bytes_invalid=0 send_seq=134536 receive_seq=134536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.248 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1668831 sysload=0.19 cputime=332.727 memavail=1627540 print_time=7198.650 buffer_time=2.328 print_stall=0 extruder: target=215 temp=215.2 pwm=0.445
Stats 7188.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4832312 bytes_read=2400724 bytes_retransmit=9 bytes_invalid=0 send_seq=134572 receive_seq=134572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.449 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1669494 sysload=0.19 cputime=332.797 memavail=1627620 print_time=7199.470 buffer_time=2.147 print_stall=0 extruder: target=215 temp=215.1 pwm=0.501
Stats 7189.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4833258 bytes_read=2401160 bytes_retransmit=9 bytes_invalid=0 send_seq=134599 receive_seq=134599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=61.3 mcu_temp: temp=43.9 sd_pos=1669672 sysload=0.18 cputime=332.856 memavail=1627672 print_time=7200.413 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.429
Stats 7190.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4834099 bytes_read=2401562 bytes_retransmit=9 bytes_invalid=0 send_seq=134622 receive_seq=134622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1669787 sysload=0.18 cputime=332.913 memavail=1627908 print_time=7201.388 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 7191.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4834986 bytes_read=2401999 bytes_retransmit=9 bytes_invalid=0 send_seq=134646 receive_seq=134646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1669907 sysload=0.18 cputime=332.972 memavail=1627184 print_time=7202.420 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.2 pwm=0.390
Stats 7192.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=4835912 bytes_read=2402446 bytes_retransmit=9 bytes_invalid=0 send_seq=134673 receive_seq=134673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1670078 sysload=0.18 cputime=333.030 memavail=1627368 print_time=7203.446 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.2 pwm=0.393
Stats 7193.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4836824 bytes_read=2402878 bytes_retransmit=9 bytes_invalid=0 send_seq=134699 receive_seq=134699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1670226 sysload=0.18 cputime=333.089 memavail=1627572 print_time=7204.455 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.1 pwm=0.499
Stats 7194.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4837686 bytes_read=2403315 bytes_retransmit=9 bytes_invalid=0 send_seq=134723 receive_seq=134723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.403 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1670402 sysload=0.16 cputime=333.147 memavail=1627456 print_time=7205.327 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.1 pwm=0.499
Stats 7195.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4838910 bytes_read=2403766 bytes_retransmit=9 bytes_invalid=0 send_seq=134753 receive_seq=134753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1670608 sysload=0.16 cputime=333.196 memavail=1628268 print_time=7206.569 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7196.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4839799 bytes_read=2404178 bytes_retransmit=9 bytes_invalid=0 send_seq=134778 receive_seq=134778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=60.9 mcu_temp: temp=43.9 sd_pos=1670725 sysload=0.16 cputime=333.249 memavail=1628528 print_time=7207.335 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 7197.6: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000056 bytes_write=4840956 bytes_read=2404640 bytes_retransmit=9 bytes_invalid=0 send_seq=134807 receive_seq=134807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=1670900 sysload=0.16 cputime=333.312 memavail=1628336 print_time=7208.363 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 7198.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4842741 bytes_read=2405156 bytes_retransmit=9 bytes_invalid=0 send_seq=134847 receive_seq=134847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=54.9 pwm=0.445 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1671339 sysload=0.16 cputime=333.376 memavail=1628536 print_time=7209.763 buffer_time=2.433 print_stall=0 extruder: target=215 temp=214.9 pwm=0.484
Stats 7199.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4844301 bytes_read=2405618 bytes_retransmit=9 bytes_invalid=0 send_seq=134882 receive_seq=134882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1671694 sysload=0.15 cputime=333.435 memavail=1628008 print_time=7210.717 buffer_time=2.386 print_stall=0 extruder: target=215 temp=215.1 pwm=0.357
Stats 7200.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4845558 bytes_read=2406095 bytes_retransmit=9 bytes_invalid=0 send_seq=134914 receive_seq=134914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.388 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1671963 sysload=0.15 cputime=333.496 memavail=1627576 print_time=7211.527 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 7201.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4847816 bytes_read=2406641 bytes_retransmit=9 bytes_invalid=0 send_seq=134963 receive_seq=134963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1672733 sysload=0.15 cputime=333.570 memavail=1628032 print_time=7212.498 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.1 pwm=0.387
Stats 7202.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4849964 bytes_read=2407153 bytes_retransmit=9 bytes_invalid=0 send_seq=135008 receive_seq=135008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.346 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1673246 sysload=0.15 cputime=333.634 memavail=1627848 print_time=7213.552 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.1 pwm=0.387
Stats 7203.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4852417 bytes_read=2407755 bytes_retransmit=9 bytes_invalid=0 send_seq=135062 receive_seq=135062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1673872 sysload=0.15 cputime=333.702 memavail=1627492 print_time=7214.662 buffer_time=2.329 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 7204.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4853444 bytes_read=2408201 bytes_retransmit=9 bytes_invalid=0 send_seq=135091 receive_seq=135091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1674119 sysload=0.14 cputime=333.761 memavail=1627288 print_time=7215.468 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 7205.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4854728 bytes_read=2408653 bytes_retransmit=9 bytes_invalid=0 send_seq=135124 receive_seq=135124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.394 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1674360 sysload=0.14 cputime=333.808 memavail=1626412 print_time=7216.487 buffer_time=2.152 print_stall=0 extruder: target=215 temp=215.2 pwm=0.395
Stats 7206.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4856083 bytes_read=2409135 bytes_retransmit=9 bytes_invalid=0 send_seq=135157 receive_seq=135157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1674606 sysload=0.14 cputime=333.867 memavail=1626664 print_time=7217.497 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 7207.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000024 mcu_task_stddev=0.000042 bytes_write=4857325 bytes_read=2409591 bytes_retransmit=9 bytes_invalid=0 send_seq=135188 receive_seq=135188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.350 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1674852 sysload=0.14 cputime=333.930 memavail=1626672 print_time=7218.554 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 7208.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4858219 bytes_read=2410016 bytes_retransmit=9 bytes_invalid=0 send_seq=135214 receive_seq=135214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1674971 sysload=0.14 cputime=333.988 memavail=1626932 print_time=7219.345 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.3 pwm=0.313
Stats 7209.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4859448 bytes_read=2410476 bytes_retransmit=9 bytes_invalid=0 send_seq=135245 receive_seq=135245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.293 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1675212 sysload=0.13 cputime=334.050 memavail=1626680 print_time=7220.666 buffer_time=2.328 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 7210.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4860449 bytes_read=2410901 bytes_retransmit=9 bytes_invalid=0 send_seq=135272 receive_seq=135272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=54.9 pwm=0.694 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=1675394 sysload=0.13 cputime=334.109 memavail=1626692 print_time=7221.521 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.8 pwm=0.527
Stats 7211.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4861797 bytes_read=2411343 bytes_retransmit=9 bytes_invalid=0 send_seq=135305 receive_seq=135305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1675740 sysload=0.13 cputime=334.171 memavail=1626624 print_time=7222.838 buffer_time=2.498 print_stall=0 extruder: target=215 temp=215.0 pwm=0.425
Stats 7212.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4862525 bytes_read=2411778 bytes_retransmit=9 bytes_invalid=0 send_seq=135329 receive_seq=135329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=59.4 mcu_temp: temp=44.7 sd_pos=1675827 sysload=0.13 cputime=334.225 memavail=1626632 print_time=7223.409 buffer_time=2.067 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 7213.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4863427 bytes_read=2412219 bytes_retransmit=9 bytes_invalid=0 send_seq=135354 receive_seq=135354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=54.9 pwm=0.540 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1675979 sysload=0.13 cputime=334.284 memavail=1626324 print_time=7224.527 buffer_time=2.185 print_stall=0 extruder: target=215 temp=214.8 pwm=0.542
Stats 7214.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4864398 bytes_read=2412636 bytes_retransmit=9 bytes_invalid=0 send_seq=135380 receive_seq=135380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.9 pwm=0.398 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1676163 sysload=0.28 cputime=334.344 memavail=1626540 print_time=7225.635 buffer_time=2.292 print_stall=0 extruder: target=215 temp=214.8 pwm=0.547
Stats 7215.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4865299 bytes_read=2413068 bytes_retransmit=9 bytes_invalid=0 send_seq=135403 receive_seq=135403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1676345 sysload=0.28 cputime=334.391 memavail=1626572 print_time=7226.653 buffer_time=2.310 print_stall=0 extruder: target=215 temp=214.8 pwm=0.485
Stats 7216.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4866527 bytes_read=2413519 bytes_retransmit=9 bytes_invalid=0 send_seq=135433 receive_seq=135433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1676631 sysload=0.28 cputime=334.451 memavail=1626632 print_time=7227.809 buffer_time=2.464 print_stall=0 extruder: target=215 temp=214.9 pwm=0.467
Stats 7217.6: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=4868848 bytes_read=2414051 bytes_retransmit=9 bytes_invalid=0 send_seq=135482 receive_seq=135482 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.062 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1677808 sysload=0.28 cputime=334.523 memavail=1626764 print_time=7228.595 buffer_time=2.250 print_stall=0 extruder: target=215 temp=214.8 pwm=0.458
Stats 7218.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4871937 bytes_read=2414683 bytes_retransmit=9 bytes_invalid=0 send_seq=135542 receive_seq=135542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1679583 sysload=0.28 cputime=334.610 memavail=1626524 print_time=7229.649 buffer_time=2.303 print_stall=0 extruder: target=215 temp=214.9 pwm=0.430
Stats 7219.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4874269 bytes_read=2415234 bytes_retransmit=9 bytes_invalid=0 send_seq=135592 receive_seq=135592 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.044 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1680093 sysload=0.25 cputime=334.679 memavail=1626524 print_time=7230.687 buffer_time=2.342 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 7220.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4876227 bytes_read=2415736 bytes_retransmit=9 bytes_invalid=0 send_seq=135635 receive_seq=135635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1682095 sysload=0.25 cputime=334.766 memavail=1626824 print_time=7231.523 buffer_time=2.177 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 7221.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4878776 bytes_read=2416308 bytes_retransmit=9 bytes_invalid=0 send_seq=135686 receive_seq=135686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.103 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1684615 sysload=0.25 cputime=334.859 memavail=1626776 print_time=7232.487 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.9 pwm=0.408
Stats 7222.6: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=4882019 bytes_read=2416929 bytes_retransmit=9 bytes_invalid=0 send_seq=135750 receive_seq=135750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.414 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1686547 sysload=0.25 cputime=334.946 memavail=1626680 print_time=7233.779 buffer_time=2.432 print_stall=0 extruder: target=215 temp=214.9 pwm=0.416
Stats 7223.6: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=4883464 bytes_read=2417402 bytes_retransmit=9 bytes_invalid=0 send_seq=135784 receive_seq=135784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1687287 sysload=0.25 cputime=335.012 memavail=1626524 print_time=7234.398 buffer_time=2.050 print_stall=0 extruder: target=215 temp=214.8 pwm=0.523
Stats 7224.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=4886227 bytes_read=2417944 bytes_retransmit=9 bytes_invalid=0 send_seq=135838 receive_seq=135829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1689011 sysload=0.23 cputime=335.096 memavail=1626784 print_time=7235.709 buffer_time=2.356 print_stall=0 extruder: target=215 temp=214.9 pwm=0.447
Stats 7225.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=4887344 bytes_read=2418435 bytes_retransmit=9 bytes_invalid=0 send_seq=135867 receive_seq=135867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.031 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1689543 sysload=0.23 cputime=335.147 memavail=1626292 print_time=7236.434 buffer_time=2.080 print_stall=0 extruder: target=215 temp=214.9 pwm=0.443
Stats 7226.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=4888234 bytes_read=2418837 bytes_retransmit=9 bytes_invalid=0 send_seq=135890 receive_seq=135890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.063 rpi: temp=60.4 mcu_temp: temp=43.6 sd_pos=1690194 sysload=0.23 cputime=335.203 memavail=1626232 print_time=7237.486 buffer_time=2.131 print_stall=0 extruder: target=215 temp=214.8 pwm=0.499
Stats 7227.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=4890793 bytes_read=2419414 bytes_retransmit=9 bytes_invalid=0 send_seq=135942 receive_seq=135942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1692233 sysload=0.23 cputime=335.288 memavail=1626544 print_time=7238.568 buffer_time=2.213 print_stall=0 extruder: target=215 temp=215.1 pwm=0.354
Stats 7228.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4892647 bytes_read=2419925 bytes_retransmit=9 bytes_invalid=0 send_seq=135981 receive_seq=135981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.192 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1694117 sysload=0.23 cputime=335.349 memavail=1625980 print_time=7239.404 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 7229.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4895079 bytes_read=2420467 bytes_retransmit=9 bytes_invalid=0 send_seq=136032 receive_seq=136032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1696086 sysload=0.21 cputime=335.431 memavail=1626228 print_time=7240.559 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 7230.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4896631 bytes_read=2420954 bytes_retransmit=9 bytes_invalid=0 send_seq=136066 receive_seq=136066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=1697610 sysload=0.21 cputime=335.509 memavail=1626428 print_time=7241.545 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.2 pwm=0.390
Stats 7231.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4897351 bytes_read=2421360 bytes_retransmit=9 bytes_invalid=0 send_seq=136087 receive_seq=136087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=1697982 sysload=0.21 cputime=335.570 memavail=1626428 print_time=7242.528 buffer_time=2.169 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 7232.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=4898899 bytes_read=2421827 bytes_retransmit=9 bytes_invalid=0 send_seq=136123 receive_seq=136123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.200 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1699064 sysload=0.21 cputime=335.645 memavail=1626332 print_time=7243.573 buffer_time=2.213 print_stall=0 extruder: target=215 temp=215.2 pwm=0.438
Stats 7233.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4901457 bytes_read=2422429 bytes_retransmit=9 bytes_invalid=0 send_seq=136177 receive_seq=136177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.733 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1700627 sysload=0.21 cputime=335.732 memavail=1626368 print_time=7244.540 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.1 pwm=0.480
Stats 7234.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4903265 bytes_read=2422925 bytes_retransmit=9 bytes_invalid=0 send_seq=136216 receive_seq=136216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1702237 sysload=0.20 cputime=335.810 memavail=1626684 print_time=7245.382 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.3 pwm=0.337
Stats 7235.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4904965 bytes_read=2423397 bytes_retransmit=9 bytes_invalid=0 send_seq=136253 receive_seq=136253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.440 rpi: temp=60.4 mcu_temp: temp=43.9 sd_pos=1703948 sysload=0.20 cputime=335.891 memavail=1626680 print_time=7246.411 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.0 pwm=0.574
Stats 7236.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4905669 bytes_read=2423809 bytes_retransmit=9 bytes_invalid=0 send_seq=136272 receive_seq=136272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=54.9 pwm=0.391 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1704330 sysload=0.20 cputime=335.936 memavail=1627136 print_time=7247.425 buffer_time=2.063 print_stall=0 extruder: target=215 temp=215.2 pwm=0.468
Stats 7237.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=4907537 bytes_read=2424310 bytes_retransmit=9 bytes_invalid=0 send_seq=136312 receive_seq=136312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1706227 sysload=0.20 cputime=336.014 memavail=1627444 print_time=7248.622 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 7238.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4909462 bytes_read=2424813 bytes_retransmit=9 bytes_invalid=0 send_seq=136352 receive_seq=136352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1708099 sysload=0.20 cputime=336.096 memavail=1627128 print_time=7249.459 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.3 pwm=0.322
Stats 7239.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4911895 bytes_read=2425375 bytes_retransmit=9 bytes_invalid=0 send_seq=136401 receive_seq=136401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.580 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1711136 sysload=0.26 cputime=336.194 memavail=1627192 print_time=7250.517 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 7240.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4914344 bytes_read=2425926 bytes_retransmit=9 bytes_invalid=0 send_seq=136451 receive_seq=136451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1713572 sysload=0.26 cputime=336.284 memavail=1626880 print_time=7251.559 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7241.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4915594 bytes_read=2426348 bytes_retransmit=9 bytes_invalid=0 send_seq=136478 receive_seq=136478 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1714307 sysload=0.26 cputime=336.346 memavail=1627196 print_time=7252.405 buffer_time=2.041 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7242.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000063 bytes_write=4916328 bytes_read=2426770 bytes_retransmit=9 bytes_invalid=0 send_seq=136499 receive_seq=136499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1714944 sysload=0.26 cputime=336.412 memavail=1627012 print_time=7253.480 buffer_time=2.115 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 7243.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=4918872 bytes_read=2427341 bytes_retransmit=9 bytes_invalid=0 send_seq=136550 receive_seq=136550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.331 rpi: temp=60.4 mcu_temp: temp=43.9 sd_pos=1717946 sysload=0.26 cputime=336.489 memavail=1627012 print_time=7254.540 buffer_time=2.174 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 7244.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=4921957 bytes_read=2427933 bytes_retransmit=9 bytes_invalid=0 send_seq=136611 receive_seq=136611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1719163 sysload=0.32 cputime=336.567 memavail=1626832 print_time=7255.841 buffer_time=2.475 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 7245.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=4923942 bytes_read=2428455 bytes_retransmit=9 bytes_invalid=0 send_seq=136652 receive_seq=136652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=59.9 mcu_temp: temp=44.8 sd_pos=1719924 sysload=0.32 cputime=336.615 memavail=1626824 print_time=7256.610 buffer_time=2.244 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 7246.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=4926129 bytes_read=2428991 bytes_retransmit=9 bytes_invalid=0 send_seq=136699 receive_seq=136699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.473 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1722351 sysload=0.32 cputime=336.703 memavail=1626760 print_time=7257.577 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.9 pwm=0.568
Stats 7247.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000056 bytes_write=4927744 bytes_read=2429453 bytes_retransmit=9 bytes_invalid=0 send_seq=136734 receive_seq=136734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1724426 sysload=0.32 cputime=336.782 memavail=1626760 print_time=7258.378 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7248.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=4930619 bytes_read=2430085 bytes_retransmit=9 bytes_invalid=0 send_seq=136791 receive_seq=136791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.062 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1726916 sysload=0.32 cputime=336.879 memavail=1626924 print_time=7259.408 buffer_time=2.039 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 7249.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=4933510 bytes_read=2430662 bytes_retransmit=9 bytes_invalid=0 send_seq=136849 receive_seq=136849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=1729298 sysload=0.29 cputime=336.978 memavail=1626900 print_time=7260.837 buffer_time=2.467 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 7250.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=4934813 bytes_read=2431104 bytes_retransmit=9 bytes_invalid=0 send_seq=136880 receive_seq=136880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1730545 sysload=0.29 cputime=337.050 memavail=1626648 print_time=7261.617 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.1 pwm=0.354
Stats 7251.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=4936692 bytes_read=2431640 bytes_retransmit=9 bytes_invalid=0 send_seq=136921 receive_seq=136921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=1732726 sysload=0.29 cputime=337.140 memavail=1626588 print_time=7262.605 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.398
Stats 7252.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=4937446 bytes_read=2432032 bytes_retransmit=9 bytes_invalid=0 send_seq=136942 receive_seq=136942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1732985 sysload=0.29 cputime=337.200 memavail=1626524 print_time=7263.377 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 7253.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4938230 bytes_read=2432465 bytes_retransmit=9 bytes_invalid=0 send_seq=136966 receive_seq=136966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1733411 sysload=0.29 cputime=337.263 memavail=1626280 print_time=7264.857 buffer_time=2.485 print_stall=0 extruder: target=215 temp=215.0 pwm=0.415
Stats 7254.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4939334 bytes_read=2432941 bytes_retransmit=9 bytes_invalid=0 send_seq=136995 receive_seq=136995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=1734276 sysload=0.27 cputime=337.328 memavail=1626532 print_time=7265.378 buffer_time=2.005 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 7255.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4941866 bytes_read=2433478 bytes_retransmit=9 bytes_invalid=0 send_seq=137045 receive_seq=137045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.226 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1738193 sysload=0.27 cputime=337.400 memavail=1626468 print_time=7266.618 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 7256.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4943870 bytes_read=2433975 bytes_retransmit=9 bytes_invalid=0 send_seq=137087 receive_seq=137087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.8 sd_pos=1740415 sysload=0.27 cputime=337.485 memavail=1626236 print_time=7267.659 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 7257.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=4945206 bytes_read=2434456 bytes_retransmit=9 bytes_invalid=0 send_seq=137117 receive_seq=137117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=60.9 mcu_temp: temp=44.2 sd_pos=1741306 sysload=0.27 cputime=337.560 memavail=1626212 print_time=7268.470 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7258.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000058 bytes_write=4945812 bytes_read=2434858 bytes_retransmit=9 bytes_invalid=0 send_seq=137137 receive_seq=137137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1741539 sysload=0.27 cputime=337.621 memavail=1626472 print_time=7269.397 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 7259.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000058 bytes_write=4946815 bytes_read=2435275 bytes_retransmit=9 bytes_invalid=0 send_seq=137163 receive_seq=137163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=60.4 mcu_temp: temp=44.0 sd_pos=1742459 sysload=0.25 cputime=337.691 memavail=1626256 print_time=7270.377 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 7260.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000058 bytes_write=4948744 bytes_read=2435816 bytes_retransmit=9 bytes_invalid=0 send_seq=137205 receive_seq=137205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.247 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1745457 sysload=0.25 cputime=337.792 memavail=1626320 print_time=7271.422 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 7261.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000058 bytes_write=4950717 bytes_read=2436308 bytes_retransmit=9 bytes_invalid=0 send_seq=137246 receive_seq=137246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1747647 sysload=0.25 cputime=337.879 memavail=1626428 print_time=7272.583 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 7262.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4952422 bytes_read=2436805 bytes_retransmit=9 bytes_invalid=0 send_seq=137282 receive_seq=137282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.031 rpi: temp=60.9 mcu_temp: temp=44.2 sd_pos=1749549 sysload=0.25 cputime=337.963 memavail=1626580 print_time=7273.395 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.0 pwm=0.467
Stats 7263.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4955000 bytes_read=2437381 bytes_retransmit=9 bytes_invalid=0 send_seq=137334 receive_seq=137334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.305 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1751110 sysload=0.25 cputime=338.044 memavail=1626484 print_time=7274.586 buffer_time=2.207 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 7264.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4956507 bytes_read=2437833 bytes_retransmit=9 bytes_invalid=0 send_seq=137367 receive_seq=137367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1751370 sysload=0.23 cputime=338.104 memavail=1626356 print_time=7275.397 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 7265.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4958415 bytes_read=2438340 bytes_retransmit=9 bytes_invalid=0 send_seq=137408 receive_seq=137408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1751798 sysload=0.23 cputime=338.170 memavail=1626576 print_time=7276.656 buffer_time=2.276 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 7266.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4959488 bytes_read=2438776 bytes_retransmit=9 bytes_invalid=0 send_seq=137432 receive_seq=137432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1752029 sysload=0.23 cputime=338.230 memavail=1626372 print_time=7277.531 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 7267.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000047 bytes_write=4960704 bytes_read=2439203 bytes_retransmit=9 bytes_invalid=0 send_seq=137460 receive_seq=137460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.011 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1752226 sysload=0.23 cputime=338.290 memavail=1626432 print_time=7278.508 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 7268.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4961942 bytes_read=2439659 bytes_retransmit=9 bytes_invalid=0 send_seq=137490 receive_seq=137490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.522 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=1752427 sysload=0.23 cputime=338.350 memavail=1626188 print_time=7279.567 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.2 pwm=0.361
Stats 7269.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4963148 bytes_read=2440108 bytes_retransmit=9 bytes_invalid=0 send_seq=137519 receive_seq=137519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1752601 sysload=0.23 cputime=338.410 memavail=1626408 print_time=7280.682 buffer_time=2.299 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 7270.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4964090 bytes_read=2440510 bytes_retransmit=9 bytes_invalid=0 send_seq=137544 receive_seq=137544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.9 pwm=0.623 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1752744 sysload=0.29 cputime=338.469 memavail=1626492 print_time=7281.465 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 7271.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4965850 bytes_read=2440999 bytes_retransmit=9 bytes_invalid=0 send_seq=137583 receive_seq=137583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1753118 sysload=0.29 cputime=338.531 memavail=1626324 print_time=7282.719 buffer_time=2.335 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 7272.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000045 bytes_write=4968394 bytes_read=2441565 bytes_retransmit=9 bytes_invalid=0 send_seq=137633 receive_seq=137633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.9 pwm=0.496 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1754121 sysload=0.29 cputime=338.605 memavail=1626044 print_time=7283.414 buffer_time=2.029 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 7273.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4971422 bytes_read=2442147 bytes_retransmit=9 bytes_invalid=0 send_seq=137689 receive_seq=137689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.081 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1754840 sysload=0.29 cputime=338.674 memavail=1626280 print_time=7284.703 buffer_time=2.318 print_stall=0 extruder: target=215 temp=215.0 pwm=0.425
Stats 7274.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4974005 bytes_read=2442704 bytes_retransmit=9 bytes_invalid=0 send_seq=137740 receive_seq=137740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1755574 sysload=0.29 cputime=338.742 memavail=1626168 print_time=7285.492 buffer_time=2.107 print_stall=0 extruder: target=215 temp=214.9 pwm=0.555
Stats 7275.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4975638 bytes_read=2443195 bytes_retransmit=9 bytes_invalid=0 send_seq=137775 receive_seq=137775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1755845 sysload=0.27 cputime=338.792 memavail=1626884 print_time=7286.812 buffer_time=2.426 print_stall=0 extruder: target=215 temp=215.1 pwm=0.350
Stats 7276.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4976610 bytes_read=2443597 bytes_retransmit=9 bytes_invalid=0 send_seq=137798 receive_seq=137798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1755974 sysload=0.27 cputime=338.845 memavail=1626324 print_time=7287.946 buffer_time=2.560 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 7277.7: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000046 bytes_write=4977294 bytes_read=2444004 bytes_retransmit=9 bytes_invalid=0 send_seq=137819 receive_seq=137819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1756036 sysload=0.27 cputime=338.899 memavail=1626312 print_time=7288.597 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 7278.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=4978258 bytes_read=2444460 bytes_retransmit=9 bytes_invalid=0 send_seq=137844 receive_seq=137844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1756159 sysload=0.27 cputime=338.959 memavail=1626204 print_time=7289.765 buffer_time=2.377 print_stall=0 extruder: target=215 temp=214.7 pwm=0.662
Stats 7279.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=4979223 bytes_read=2444872 bytes_retransmit=9 bytes_invalid=0 send_seq=137869 receive_seq=137869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1756344 sysload=0.27 cputime=339.016 memavail=1626432 print_time=7290.899 buffer_time=2.511 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7280.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=4979789 bytes_read=2445264 bytes_retransmit=9 bytes_invalid=0 send_seq=137887 receive_seq=137887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1756411 sysload=0.25 cputime=339.070 memavail=1626400 print_time=7291.423 buffer_time=2.034 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7281.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=4980745 bytes_read=2445705 bytes_retransmit=9 bytes_invalid=0 send_seq=137912 receive_seq=137912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=1756565 sysload=0.25 cputime=339.130 memavail=1626148 print_time=7292.564 buffer_time=2.172 print_stall=0 extruder: target=215 temp=214.8 pwm=0.485
Stats 7282.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=4981832 bytes_read=2446127 bytes_retransmit=9 bytes_invalid=0 send_seq=137939 receive_seq=137939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.141 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1756717 sysload=0.25 cputime=339.188 memavail=1626204 print_time=7293.525 buffer_time=2.131 print_stall=0 extruder: target=215 temp=214.9 pwm=0.412
Stats 7283.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4983161 bytes_read=2446599 bytes_retransmit=9 bytes_invalid=0 send_seq=137970 receive_seq=137970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1756905 sysload=0.25 cputime=339.249 memavail=1626220 print_time=7294.697 buffer_time=2.301 print_stall=0 extruder: target=215 temp=214.8 pwm=0.549
Stats 7284.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4984101 bytes_read=2447045 bytes_retransmit=9 bytes_invalid=0 send_seq=137996 receive_seq=137996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=54.9 pwm=0.505 rpi: temp=58.9 mcu_temp: temp=44.4 sd_pos=1757090 sysload=0.25 cputime=339.311 memavail=1626156 print_time=7295.473 buffer_time=2.073 print_stall=0 extruder: target=215 temp=214.9 pwm=0.444
Stats 7285.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4985351 bytes_read=2447482 bytes_retransmit=9 bytes_invalid=0 send_seq=138026 receive_seq=138026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1757274 sysload=0.23 cputime=339.375 memavail=1626348 print_time=7296.537 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 7286.7: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000055 bytes_write=4986923 bytes_read=2447954 bytes_retransmit=9 bytes_invalid=0 send_seq=138060 receive_seq=138060 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1757548 sysload=0.23 cputime=339.434 memavail=1626160 print_time=7297.704 buffer_time=2.301 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 7287.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4988547 bytes_read=2448465 bytes_retransmit=9 bytes_invalid=0 send_seq=138096 receive_seq=138096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.040 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1757885 sysload=0.23 cputime=339.500 memavail=1626292 print_time=7298.596 buffer_time=2.192 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 7288.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4990366 bytes_read=2448947 bytes_retransmit=9 bytes_invalid=0 send_seq=138135 receive_seq=138135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1758286 sysload=0.23 cputime=339.564 memavail=1626540 print_time=7299.738 buffer_time=2.334 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 7289.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4992490 bytes_read=2449469 bytes_retransmit=9 bytes_invalid=0 send_seq=138179 receive_seq=138179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.382 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=1758898 sysload=0.23 cputime=339.630 memavail=1626652 print_time=7300.542 buffer_time=2.137 print_stall=0 extruder: target=215 temp=215.2 pwm=0.333
Stats 7290.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4994771 bytes_read=2450025 bytes_retransmit=9 bytes_invalid=0 send_seq=138227 receive_seq=138227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.8 sd_pos=1761273 sysload=0.21 cputime=339.715 memavail=1626856 print_time=7301.398 buffer_time=1.986 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 7291.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=4997887 bytes_read=2450617 bytes_retransmit=9 bytes_invalid=0 send_seq=138288 receive_seq=138288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=54.9 pwm=0.493 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1762243 sysload=0.21 cputime=339.793 memavail=1626832 print_time=7302.458 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.0 pwm=0.464
Stats 7292.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=4999140 bytes_read=2451100 bytes_retransmit=9 bytes_invalid=0 send_seq=138318 receive_seq=138318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.363 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1762430 sysload=0.21 cputime=339.856 memavail=1627116 print_time=7303.690 buffer_time=2.276 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 7293.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=5000040 bytes_read=2451516 bytes_retransmit=9 bytes_invalid=0 send_seq=138341 receive_seq=138341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=60.4 mcu_temp: temp=44.8 sd_pos=1762580 sysload=0.21 cputime=339.914 memavail=1626824 print_time=7304.731 buffer_time=2.317 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 7294.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=5000957 bytes_read=2451918 bytes_retransmit=9 bytes_invalid=0 send_seq=138364 receive_seq=138364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1762729 sysload=0.21 cputime=339.974 memavail=1627368 print_time=7305.730 buffer_time=2.315 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 7295.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=5001817 bytes_read=2452355 bytes_retransmit=9 bytes_invalid=0 send_seq=138388 receive_seq=138388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.116 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1762910 sysload=0.19 cputime=340.036 memavail=1626320 print_time=7306.591 buffer_time=2.175 print_stall=0 extruder: target=215 temp=214.9 pwm=0.486
Stats 7296.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=5003613 bytes_read=2452846 bytes_retransmit=9 bytes_invalid=0 send_seq=138426 receive_seq=138426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.092 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1764215 sysload=0.19 cputime=340.138 memavail=1626000 print_time=7307.506 buffer_time=2.089 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 7297.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=5005763 bytes_read=2453353 bytes_retransmit=9 bytes_invalid=0 send_seq=138470 receive_seq=138470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1766399 sysload=0.19 cputime=340.221 memavail=1626252 print_time=7308.424 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 7298.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5008625 bytes_read=2453965 bytes_retransmit=9 bytes_invalid=0 send_seq=138526 receive_seq=138526 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1768697 sysload=0.19 cputime=340.320 memavail=1625944 print_time=7309.534 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 7299.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5011418 bytes_read=2454541 bytes_retransmit=9 bytes_invalid=0 send_seq=138581 receive_seq=138581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1770124 sysload=0.19 cputime=340.397 memavail=1626556 print_time=7310.545 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.1 pwm=0.517
Stats 7300.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5013852 bytes_read=2455083 bytes_retransmit=9 bytes_invalid=0 send_seq=138632 receive_seq=138632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=1771120 sysload=0.26 cputime=340.469 memavail=1626328 print_time=7311.583 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.2 pwm=0.472
Stats 7301.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5015892 bytes_read=2455615 bytes_retransmit=9 bytes_invalid=0 send_seq=138675 receive_seq=138675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1772205 sysload=0.26 cputime=340.542 memavail=1626320 print_time=7312.564 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.1 pwm=0.552
Stats 7302.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5017974 bytes_read=2456126 bytes_retransmit=9 bytes_invalid=0 send_seq=138717 receive_seq=138717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.523 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=1773533 sysload=0.26 cputime=340.613 memavail=1626072 print_time=7313.676 buffer_time=2.256 print_stall=0 extruder: target=215 temp=215.2 pwm=0.478
Stats 7303.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000051 bytes_write=5018667 bytes_read=2456529 bytes_retransmit=9 bytes_invalid=0 send_seq=138737 receive_seq=138737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1773857 sysload=0.26 cputime=340.673 memavail=1626072 print_time=7314.643 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.2 pwm=0.425
Stats 7304.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000051 bytes_write=5020665 bytes_read=2457051 bytes_retransmit=9 bytes_invalid=0 send_seq=138778 receive_seq=138778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.036 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1775567 sysload=0.26 cputime=340.753 memavail=1626324 print_time=7315.583 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.2 pwm=0.425
Stats 7305.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000051 bytes_write=5023147 bytes_read=2457617 bytes_retransmit=9 bytes_invalid=0 send_seq=138831 receive_seq=138831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1777899 sysload=0.23 cputime=340.819 memavail=1626608 print_time=7316.649 buffer_time=2.228 print_stall=0 extruder: target=215 temp=215.2 pwm=0.431
Stats 7306.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000051 bytes_write=5025095 bytes_read=2458109 bytes_retransmit=9 bytes_invalid=0 send_seq=138872 receive_seq=138872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.265 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1779361 sysload=0.23 cputime=340.895 memavail=1626448 print_time=7317.559 buffer_time=2.137 print_stall=0 extruder: target=215 temp=215.2 pwm=0.420
Stats 7307.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000051 bytes_write=5026966 bytes_read=2458626 bytes_retransmit=9 bytes_invalid=0 send_seq=138912 receive_seq=138912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1781315 sysload=0.23 cputime=340.984 memavail=1626584 print_time=7318.584 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.3 pwm=0.376
Stats 7308.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5028181 bytes_read=2459077 bytes_retransmit=9 bytes_invalid=0 send_seq=138939 receive_seq=138939 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=59.9 mcu_temp: temp=44.0 sd_pos=1781855 sysload=0.23 cputime=341.054 memavail=1626332 print_time=7319.794 buffer_time=2.372 print_stall=0 extruder: target=215 temp=215.1 pwm=0.552
Stats 7309.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5029551 bytes_read=2459519 bytes_retransmit=9 bytes_invalid=0 send_seq=138970 receive_seq=138970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1782762 sysload=0.23 cputime=341.126 memavail=1626140 print_time=7320.714 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 7310.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5031312 bytes_read=2460026 bytes_retransmit=9 bytes_invalid=0 send_seq=139008 receive_seq=139008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.161 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=1783443 sysload=0.22 cputime=341.194 memavail=1626396 print_time=7321.468 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 7311.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5033825 bytes_read=2460582 bytes_retransmit=9 bytes_invalid=0 send_seq=139059 receive_seq=139059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.008 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1785736 sysload=0.22 cputime=341.283 memavail=1626396 print_time=7322.589 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.9 pwm=0.591
Stats 7312.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5035481 bytes_read=2461054 bytes_retransmit=9 bytes_invalid=0 send_seq=139096 receive_seq=139096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.018 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1787541 sysload=0.22 cputime=341.366 memavail=1626340 print_time=7323.605 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 7313.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5036159 bytes_read=2461487 bytes_retransmit=9 bytes_invalid=0 send_seq=139116 receive_seq=139116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.8 pwm=0.932 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1787864 sysload=0.22 cputime=341.427 memavail=1626408 print_time=7324.603 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 7314.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5037443 bytes_read=2461944 bytes_retransmit=9 bytes_invalid=0 send_seq=139145 receive_seq=139145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.398 rpi: temp=60.9 mcu_temp: temp=44.9 sd_pos=1789147 sysload=0.22 cputime=341.501 memavail=1626408 print_time=7325.519 buffer_time=2.092 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 7315.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5039840 bytes_read=2462476 bytes_retransmit=9 bytes_invalid=0 send_seq=139194 receive_seq=139194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1791510 sysload=0.20 cputime=341.587 memavail=1626500 print_time=7326.606 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7316.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5042147 bytes_read=2463028 bytes_retransmit=9 bytes_invalid=0 send_seq=139241 receive_seq=139241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1794386 sysload=0.20 cputime=341.686 memavail=1626248 print_time=7327.662 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7317.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5044096 bytes_read=2463524 bytes_retransmit=9 bytes_invalid=0 send_seq=139280 receive_seq=139280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.324 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1796175 sysload=0.20 cputime=341.765 memavail=1626524 print_time=7328.440 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.1 pwm=0.312
Stats 7318.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=5046013 bytes_read=2464031 bytes_retransmit=9 bytes_invalid=0 send_seq=139321 receive_seq=139321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1797587 sysload=0.20 cputime=341.844 memavail=1626532 print_time=7329.515 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.0 pwm=0.414
Stats 7319.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=5047178 bytes_read=2464498 bytes_retransmit=9 bytes_invalid=0 send_seq=139351 receive_seq=139351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1798472 sysload=0.20 cputime=341.916 memavail=1626528 print_time=7330.664 buffer_time=2.233 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 7320.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=5049079 bytes_read=2464994 bytes_retransmit=9 bytes_invalid=0 send_seq=139390 receive_seq=139390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1800738 sysload=0.18 cputime=342.001 memavail=1626712 print_time=7331.440 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.0 pwm=0.386
Stats 7321.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=5051718 bytes_read=2465551 bytes_retransmit=9 bytes_invalid=0 send_seq=139444 receive_seq=139444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1802528 sysload=0.18 cputime=342.089 memavail=1627280 print_time=7332.542 buffer_time=2.109 print_stall=0 extruder: target=215 temp=214.9 pwm=0.512
Stats 7322.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=5053597 bytes_read=2466078 bytes_retransmit=9 bytes_invalid=0 send_seq=139486 receive_seq=139486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1805567 sysload=0.18 cputime=342.186 memavail=1627028 print_time=7333.593 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 7323.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5056604 bytes_read=2466694 bytes_retransmit=9 bytes_invalid=0 send_seq=139546 receive_seq=139546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.057 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1808102 sysload=0.18 cputime=342.279 memavail=1626776 print_time=7334.695 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 7324.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5058073 bytes_read=2467151 bytes_retransmit=9 bytes_invalid=0 send_seq=139580 receive_seq=139580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1809945 sysload=0.18 cputime=342.357 memavail=1627084 print_time=7335.468 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.363
Stats 7325.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5060620 bytes_read=2467733 bytes_retransmit=9 bytes_invalid=0 send_seq=139633 receive_seq=139633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.547 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=1811549 sysload=0.17 cputime=342.426 memavail=1626532 print_time=7336.621 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.0 pwm=0.400
Stats 7326.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5062258 bytes_read=2468219 bytes_retransmit=9 bytes_invalid=0 send_seq=139670 receive_seq=139670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=1813588 sysload=0.17 cputime=342.508 memavail=1626720 print_time=7337.641 buffer_time=2.205 print_stall=0 extruder: target=215 temp=214.8 pwm=0.531
Stats 7327.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5063928 bytes_read=2468683 bytes_retransmit=9 bytes_invalid=0 send_seq=139706 receive_seq=139706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.501 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1815019 sysload=0.17 cputime=342.586 memavail=1626192 print_time=7338.604 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.7 pwm=0.599
Stats 7328.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5064814 bytes_read=2469119 bytes_retransmit=9 bytes_invalid=0 send_seq=139729 receive_seq=139729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.593 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1815585 sysload=0.17 cputime=342.657 memavail=1626224 print_time=7339.578 buffer_time=2.141 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 7329.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5065373 bytes_read=2469509 bytes_retransmit=9 bytes_invalid=0 send_seq=139749 receive_seq=139749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=54.9 pwm=0.469 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1815790 sysload=0.17 cputime=342.716 memavail=1626600 print_time=7340.491 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.393
Stats 7330.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5066648 bytes_read=2469946 bytes_retransmit=9 bytes_invalid=0 send_seq=139781 receive_seq=139781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.049 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1817009 sysload=0.15 cputime=342.792 memavail=1626592 print_time=7341.555 buffer_time=2.116 print_stall=0 extruder: target=215 temp=215.0 pwm=0.379
Stats 7331.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5068481 bytes_read=2470460 bytes_retransmit=9 bytes_invalid=0 send_seq=139821 receive_seq=139821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1818710 sysload=0.15 cputime=342.874 memavail=1626316 print_time=7342.587 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.9 pwm=0.463
Stats 7332.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5070412 bytes_read=2470971 bytes_retransmit=9 bytes_invalid=0 send_seq=139863 receive_seq=139863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=1821041 sysload=0.15 cputime=342.963 memavail=1626188 print_time=7343.593 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.9 pwm=0.482
Stats 7333.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5071142 bytes_read=2471383 bytes_retransmit=9 bytes_invalid=0 send_seq=139885 receive_seq=139885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.123 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1821315 sysload=0.15 cputime=343.021 memavail=1626352 print_time=7344.620 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 7334.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5071819 bytes_read=2471800 bytes_retransmit=9 bytes_invalid=0 send_seq=139905 receive_seq=139905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.354 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1821563 sysload=0.15 cputime=343.083 memavail=1626540 print_time=7345.571 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 7335.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5073718 bytes_read=2472306 bytes_retransmit=9 bytes_invalid=0 send_seq=139946 receive_seq=139946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=54.9 pwm=0.381 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1823674 sysload=0.14 cputime=343.147 memavail=1627040 print_time=7346.583 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.9 pwm=0.515
Stats 7336.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5075544 bytes_read=2472798 bytes_retransmit=9 bytes_invalid=0 send_seq=139987 receive_seq=139987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.361 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1826705 sysload=0.14 cputime=343.238 memavail=1627296 print_time=7347.703 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.0 pwm=0.450
Stats 7337.7: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5077322 bytes_read=2473315 bytes_retransmit=9 bytes_invalid=0 send_seq=140027 receive_seq=140027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.320 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1828355 sysload=0.14 cputime=343.318 memavail=1627156 print_time=7348.500 buffer_time=2.055 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 7338.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=5079257 bytes_read=2473846 bytes_retransmit=9 bytes_invalid=0 send_seq=140070 receive_seq=140070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1829464 sysload=0.14 cputime=343.385 memavail=1627036 print_time=7349.534 buffer_time=2.089 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 7339.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=5080143 bytes_read=2474253 bytes_retransmit=9 bytes_invalid=0 send_seq=140094 receive_seq=140094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=45.0 sd_pos=1829581 sysload=0.14 cputime=343.439 memavail=1627032 print_time=7350.497 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.1 pwm=0.386
Stats 7340.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=5081022 bytes_read=2474690 bytes_retransmit=9 bytes_invalid=0 send_seq=140118 receive_seq=140118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.172 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1829729 sysload=0.13 cputime=343.497 memavail=1626780 print_time=7351.473 buffer_time=2.026 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7341.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=5082127 bytes_read=2475131 bytes_retransmit=9 bytes_invalid=0 send_seq=140146 receive_seq=140146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.8 sd_pos=1829996 sysload=0.13 cputime=343.559 memavail=1626996 print_time=7352.839 buffer_time=2.391 print_stall=0 extruder: target=215 temp=215.2 pwm=0.358
Stats 7342.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000060 bytes_write=5082966 bytes_read=2475538 bytes_retransmit=9 bytes_invalid=0 send_seq=140170 receive_seq=140170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.1 pwm=0.255 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1830126 sysload=0.13 cputime=343.618 memavail=1626792 print_time=7353.649 buffer_time=2.200 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 7343.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=5084053 bytes_read=2476010 bytes_retransmit=9 bytes_invalid=0 send_seq=140198 receive_seq=140198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.3 sd_pos=1830244 sysload=0.13 cputime=343.675 memavail=1626728 print_time=7354.585 buffer_time=2.135 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 7344.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=5085175 bytes_read=2476446 bytes_retransmit=9 bytes_invalid=0 send_seq=140225 receive_seq=140225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1830448 sysload=0.13 cputime=343.722 memavail=1626540 print_time=7355.757 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 7345.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=5086041 bytes_read=2476853 bytes_retransmit=9 bytes_invalid=0 send_seq=140249 receive_seq=140249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.464 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=1830626 sysload=0.12 cputime=343.766 memavail=1625976 print_time=7356.475 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 7346.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=5087508 bytes_read=2477340 bytes_retransmit=9 bytes_invalid=0 send_seq=140283 receive_seq=140283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.1 pwm=0.187 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1830894 sysload=0.12 cputime=343.825 memavail=1626048 print_time=7357.722 buffer_time=2.270 print_stall=0 extruder: target=215 temp=215.2 pwm=0.354
Stats 7347.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000056 bytes_write=5088769 bytes_read=2477791 bytes_retransmit=9 bytes_invalid=0 send_seq=140313 receive_seq=140313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.390 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1831069 sysload=0.12 cputime=343.884 memavail=1626048 print_time=7358.492 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 7348.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5090897 bytes_read=2478318 bytes_retransmit=9 bytes_invalid=0 send_seq=140358 receive_seq=140358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1831545 sysload=0.12 cputime=343.948 memavail=1626300 print_time=7359.822 buffer_time=2.370 print_stall=0 extruder: target=215 temp=215.0 pwm=0.524
Stats 7349.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5092551 bytes_read=2478820 bytes_retransmit=9 bytes_invalid=0 send_seq=140395 receive_seq=140395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.1 pwm=0.200 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1831842 sysload=0.12 cputime=344.013 memavail=1626384 print_time=7360.890 buffer_time=2.437 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 7350.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5094476 bytes_read=2479336 bytes_retransmit=9 bytes_invalid=0 send_seq=140438 receive_seq=140438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.1 pwm=0.140 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1832457 sysload=0.11 cputime=344.080 memavail=1626060 print_time=7361.607 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.1 pwm=0.386
Stats 7351.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5097412 bytes_read=2479913 bytes_retransmit=9 bytes_invalid=0 send_seq=140496 receive_seq=140496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=54.9 pwm=0.593 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1833244 sysload=0.11 cputime=344.134 memavail=1626312 print_time=7362.716 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.8 pwm=0.592
Stats 7352.8: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5100167 bytes_read=2480510 bytes_retransmit=9 bytes_invalid=0 send_seq=140552 receive_seq=140552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1833970 sysload=0.11 cputime=344.203 memavail=1626312 print_time=7363.875 buffer_time=2.420 print_stall=0 extruder: target=215 temp=214.8 pwm=0.547
Stats 7353.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000042 bytes_write=5101357 bytes_read=2480982 bytes_retransmit=9 bytes_invalid=0 send_seq=140583 receive_seq=140583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1834212 sysload=0.11 cputime=344.262 memavail=1626312 print_time=7364.618 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 7354.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000042 bytes_write=5102627 bytes_read=2481414 bytes_retransmit=9 bytes_invalid=0 send_seq=140612 receive_seq=140612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=54.9 pwm=0.550 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1834429 sysload=0.11 cputime=344.320 memavail=1626564 print_time=7365.532 buffer_time=2.076 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 7355.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000042 bytes_write=5103899 bytes_read=2481886 bytes_retransmit=9 bytes_invalid=0 send_seq=140643 receive_seq=140643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.3 sd_pos=1834707 sysload=0.10 cputime=344.369 memavail=1626500 print_time=7366.601 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.9 pwm=0.485
Stats 7356.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000042 bytes_write=5105204 bytes_read=2482342 bytes_retransmit=9 bytes_invalid=0 send_seq=140674 receive_seq=140674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1834954 sysload=0.10 cputime=344.413 memavail=1626384 print_time=7367.541 buffer_time=2.083 print_stall=0 extruder: target=215 temp=214.9 pwm=0.485
Stats 7357.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000042 bytes_write=5106501 bytes_read=2482784 bytes_retransmit=9 bytes_invalid=0 send_seq=140705 receive_seq=140705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=1835168 sysload=0.10 cputime=344.469 memavail=1626576 print_time=7368.481 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.1 pwm=0.311
Stats 7358.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5107706 bytes_read=2483266 bytes_retransmit=9 bytes_invalid=0 send_seq=140735 receive_seq=140735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.134 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1835412 sysload=0.10 cputime=344.533 memavail=1626240 print_time=7369.523 buffer_time=2.064 print_stall=0 extruder: target=215 temp=214.8 pwm=0.479
Stats 7359.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5108903 bytes_read=2483722 bytes_retransmit=9 bytes_invalid=0 send_seq=140766 receive_seq=140766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1835627 sysload=0.10 cputime=344.593 memavail=1626512 print_time=7370.734 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 7360.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5109913 bytes_read=2484139 bytes_retransmit=9 bytes_invalid=0 send_seq=140792 receive_seq=140792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.1 pwm=0.181 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1835810 sysload=0.09 cputime=344.639 memavail=1626600 print_time=7371.579 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 7361.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5111180 bytes_read=2484616 bytes_retransmit=9 bytes_invalid=0 send_seq=140824 receive_seq=140824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1836055 sysload=0.09 cputime=344.696 memavail=1626232 print_time=7372.710 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 7362.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5112110 bytes_read=2485042 bytes_retransmit=9 bytes_invalid=0 send_seq=140849 receive_seq=140849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1836205 sysload=0.09 cputime=344.756 memavail=1626808 print_time=7373.623 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.9 pwm=0.467
Stats 7363.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5113024 bytes_read=2485469 bytes_retransmit=9 bytes_invalid=0 send_seq=140874 receive_seq=140874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.221 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1836328 sysload=0.09 cputime=344.813 memavail=1626484 print_time=7374.688 buffer_time=2.225 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 7364.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5113882 bytes_read=2485906 bytes_retransmit=9 bytes_invalid=0 send_seq=140898 receive_seq=140898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.114 rpi: temp=60.9 mcu_temp: temp=44.2 sd_pos=1836450 sysload=0.09 cputime=344.870 memavail=1626492 print_time=7375.741 buffer_time=2.277 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 7365.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5114798 bytes_read=2486327 bytes_retransmit=9 bytes_invalid=0 send_seq=140922 receive_seq=140922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1836665 sysload=0.08 cputime=344.916 memavail=1626108 print_time=7376.665 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 7366.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5117215 bytes_read=2486859 bytes_retransmit=9 bytes_invalid=0 send_seq=140971 receive_seq=140971 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.315 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1837734 sysload=0.08 cputime=344.985 memavail=1626252 print_time=7377.889 buffer_time=2.424 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 7367.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5119760 bytes_read=2487431 bytes_retransmit=9 bytes_invalid=0 send_seq=141022 receive_seq=141022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.403 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1839058 sysload=0.08 cputime=345.060 memavail=1626380 print_time=7378.765 buffer_time=2.300 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 7368.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5123036 bytes_read=2488062 bytes_retransmit=9 bytes_invalid=0 send_seq=141085 receive_seq=141085 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.1 pwm=0.093 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1841323 sysload=0.08 cputime=345.156 memavail=1626068 print_time=7379.814 buffer_time=2.348 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 7369.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5125745 bytes_read=2488619 bytes_retransmit=9 bytes_invalid=0 send_seq=141139 receive_seq=141139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1842161 sysload=0.08 cputime=345.224 memavail=1626012 print_time=7380.711 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.1 pwm=0.373
Stats 7370.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5128260 bytes_read=2489210 bytes_retransmit=9 bytes_invalid=0 send_seq=141191 receive_seq=141191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.1 pwm=0.091 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1844182 sysload=0.08 cputime=345.317 memavail=1626328 print_time=7381.711 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 7371.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5130650 bytes_read=2489732 bytes_retransmit=9 bytes_invalid=0 send_seq=141238 receive_seq=141238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1846732 sysload=0.08 cputime=345.409 memavail=1626304 print_time=7382.695 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 7372.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5133102 bytes_read=2490269 bytes_retransmit=9 bytes_invalid=0 send_seq=141288 receive_seq=141288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1848545 sysload=0.08 cputime=345.490 memavail=1626272 print_time=7383.723 buffer_time=2.254 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 7373.8: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000047 bytes_write=5135447 bytes_read=2490851 bytes_retransmit=9 bytes_invalid=0 send_seq=141335 receive_seq=141335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1849574 sysload=0.08 cputime=345.565 memavail=1625860 print_time=7384.600 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 7374.8: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000047 bytes_write=5137452 bytes_read=2491358 bytes_retransmit=9 bytes_invalid=0 send_seq=141379 receive_seq=141379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=54.9 pwm=0.342 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1850625 sysload=0.08 cputime=345.635 memavail=1626284 print_time=7385.532 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 7375.8: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000047 bytes_write=5139516 bytes_read=2491881 bytes_retransmit=9 bytes_invalid=0 send_seq=141424 receive_seq=141424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1851833 sysload=0.07 cputime=345.713 memavail=1626312 print_time=7386.625 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 7376.8: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000047 bytes_write=5140290 bytes_read=2492327 bytes_retransmit=9 bytes_invalid=0 send_seq=141447 receive_seq=141447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1852365 sysload=0.07 cputime=345.780 memavail=1626032 print_time=7387.691 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 7377.8: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000047 bytes_write=5142263 bytes_read=2492829 bytes_retransmit=9 bytes_invalid=0 send_seq=141490 receive_seq=141490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1853895 sysload=0.07 cputime=345.856 memavail=1626196 print_time=7388.508 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.2 pwm=0.384
Stats 7378.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5144715 bytes_read=2493376 bytes_retransmit=9 bytes_invalid=0 send_seq=141539 receive_seq=141539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.1 pwm=0.108 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1856270 sysload=0.07 cputime=345.946 memavail=1626092 print_time=7389.604 buffer_time=2.132 print_stall=0 extruder: target=215 temp=215.2 pwm=0.404
Stats 7379.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5146659 bytes_read=2493912 bytes_retransmit=9 bytes_invalid=0 send_seq=141580 receive_seq=141580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.379 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1857698 sysload=0.07 cputime=346.029 memavail=1626028 print_time=7390.500 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 7380.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5148438 bytes_read=2494389 bytes_retransmit=9 bytes_invalid=0 send_seq=141618 receive_seq=141618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=54.9 pwm=0.572 rpi: temp=60.4 mcu_temp: temp=44.8 sd_pos=1859590 sysload=0.15 cputime=346.118 memavail=1626408 print_time=7391.515 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.0 pwm=0.514
Stats 7381.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5149345 bytes_read=2494796 bytes_retransmit=9 bytes_invalid=0 send_seq=141642 receive_seq=141642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1859956 sysload=0.15 cputime=346.180 memavail=1626272 print_time=7392.605 buffer_time=2.131 print_stall=0 extruder: target=215 temp=215.1 pwm=0.499
Stats 7382.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5150966 bytes_read=2495312 bytes_retransmit=9 bytes_invalid=0 send_seq=141679 receive_seq=141679 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=54.9 pwm=0.607 rpi: temp=60.9 mcu_temp: temp=44.9 sd_pos=1861012 sysload=0.15 cputime=346.255 memavail=1626224 print_time=7393.661 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.2 pwm=0.399
Stats 7383.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5153529 bytes_read=2495874 bytes_retransmit=9 bytes_invalid=0 send_seq=141731 receive_seq=141731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=1862629 sysload=0.15 cputime=346.333 memavail=1626216 print_time=7394.672 buffer_time=2.197 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 7384.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5155699 bytes_read=2496381 bytes_retransmit=9 bytes_invalid=0 send_seq=141775 receive_seq=141775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1864499 sysload=0.15 cputime=346.420 memavail=1626224 print_time=7395.722 buffer_time=2.246 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 7385.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5157144 bytes_read=2496872 bytes_retransmit=9 bytes_invalid=0 send_seq=141807 receive_seq=141807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.1 pwm=0.109 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=1865662 sysload=0.13 cputime=346.498 memavail=1626748 print_time=7396.770 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 7386.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5158059 bytes_read=2497274 bytes_retransmit=9 bytes_invalid=0 send_seq=141830 receive_seq=141830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1866193 sysload=0.13 cputime=346.561 memavail=1626484 print_time=7397.868 buffer_time=2.390 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 7387.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5159726 bytes_read=2497742 bytes_retransmit=9 bytes_invalid=0 send_seq=141865 receive_seq=141865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=11 freq=71996318 heater_bed: target=55 temp=54.9 pwm=0.424 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1868042 sysload=0.13 cputime=346.622 memavail=1626292 print_time=7398.659 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.2 pwm=0.351
Stats 7388.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5161797 bytes_read=2498282 bytes_retransmit=9 bytes_invalid=0 send_seq=141909 receive_seq=141909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=54.9 pwm=0.629 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1869820 sysload=0.13 cputime=346.698 memavail=1626556 print_time=7399.513 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.2 pwm=0.393
Stats 7389.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5164131 bytes_read=2498794 bytes_retransmit=9 bytes_invalid=0 send_seq=141956 receive_seq=141956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.410 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1872854 sysload=0.13 cputime=346.794 memavail=1626492 print_time=7400.556 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.9 pwm=0.563
Stats 7390.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5166683 bytes_read=2499351 bytes_retransmit=9 bytes_invalid=0 send_seq=142009 receive_seq=142009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=11 freq=71996315 heater_bed: target=55 temp=54.9 pwm=0.323 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1875193 sysload=0.12 cputime=346.883 memavail=1626488 print_time=7401.614 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 7391.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5167583 bytes_read=2499787 bytes_retransmit=9 bytes_invalid=0 send_seq=142033 receive_seq=142033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1875462 sysload=0.12 cputime=346.944 memavail=1626540 print_time=7402.506 buffer_time=2.026 print_stall=0 extruder: target=215 temp=215.0 pwm=0.411
Stats 7392.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000066 bytes_write=5169132 bytes_read=2500249 bytes_retransmit=9 bytes_invalid=0 send_seq=142068 receive_seq=142068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.110 rpi: temp=61.3 mcu_temp: temp=44.0 sd_pos=1876715 sysload=0.12 cputime=347.017 memavail=1626684 print_time=7403.565 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.0 pwm=0.394
Stats 7393.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5171676 bytes_read=2500826 bytes_retransmit=9 bytes_invalid=0 send_seq=142120 receive_seq=142120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=54.9 pwm=0.410 rpi: temp=60.9 mcu_temp: temp=44.2 sd_pos=1879417 sysload=0.12 cputime=347.111 memavail=1626464 print_time=7404.723 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.0 pwm=0.432
Stats 7394.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5174480 bytes_read=2501427 bytes_retransmit=9 bytes_invalid=0 send_seq=142177 receive_seq=142177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=54.9 pwm=0.411 rpi: temp=59.4 mcu_temp: temp=44.5 sd_pos=1880352 sysload=0.12 cputime=347.185 memavail=1626540 print_time=7405.827 buffer_time=2.344 print_stall=0 extruder: target=215 temp=215.0 pwm=0.427
Stats 7395.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5176263 bytes_read=2501909 bytes_retransmit=9 bytes_invalid=0 send_seq=142216 receive_seq=142216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1881883 sysload=0.19 cputime=347.245 memavail=1626604 print_time=7406.535 buffer_time=2.052 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 7396.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5178194 bytes_read=2502416 bytes_retransmit=9 bytes_invalid=0 send_seq=142257 receive_seq=142257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.0 pwm=0.448 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1884823 sysload=0.19 cputime=347.332 memavail=1626936 print_time=7407.594 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 7397.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=5181055 bytes_read=2503007 bytes_retransmit=9 bytes_invalid=0 send_seq=142312 receive_seq=142312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.174 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=1887312 sysload=0.19 cputime=347.427 memavail=1626308 print_time=7408.623 buffer_time=2.138 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 7398.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5182563 bytes_read=2503475 bytes_retransmit=9 bytes_invalid=0 send_seq=142345 receive_seq=142345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=1889004 sysload=0.19 cputime=347.501 memavail=1626628 print_time=7409.536 buffer_time=2.051 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 7399.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5185104 bytes_read=2504037 bytes_retransmit=9 bytes_invalid=0 send_seq=142397 receive_seq=142397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1890663 sysload=0.19 cputime=347.581 memavail=1626420 print_time=7410.576 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.9 pwm=0.568
Stats 7400.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5187094 bytes_read=2504558 bytes_retransmit=9 bytes_invalid=0 send_seq=142438 receive_seq=142438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=61.3 mcu_temp: temp=44.0 sd_pos=1892716 sysload=0.18 cputime=347.666 memavail=1626372 print_time=7411.848 buffer_time=2.357 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 7401.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5188309 bytes_read=2505000 bytes_retransmit=9 bytes_invalid=0 send_seq=142469 receive_seq=142469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.264 rpi: temp=61.3 mcu_temp: temp=44.1 sd_pos=1893786 sysload=0.18 cputime=347.739 memavail=1626276 print_time=7412.735 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.9 pwm=0.554
Stats 7402.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5188821 bytes_read=2505392 bytes_retransmit=9 bytes_invalid=0 send_seq=142487 receive_seq=142487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1893961 sysload=0.18 cputime=347.796 memavail=1626568 print_time=7413.633 buffer_time=2.138 print_stall=0 extruder: target=215 temp=214.9 pwm=0.475
Stats 7403.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5189795 bytes_read=2505843 bytes_retransmit=9 bytes_invalid=0 send_seq=142511 receive_seq=142511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.1 pwm=0.187 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1894558 sysload=0.18 cputime=347.858 memavail=1626176 print_time=7414.755 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.1 pwm=0.385
Stats 7404.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5191119 bytes_read=2506285 bytes_retransmit=9 bytes_invalid=0 send_seq=142542 receive_seq=142542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.1 pwm=0.121 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1896003 sysload=0.18 cputime=347.933 memavail=1626176 print_time=7415.544 buffer_time=2.048 print_stall=0 extruder: target=215 temp=215.0 pwm=0.398
Stats 7405.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5192955 bytes_read=2506787 bytes_retransmit=9 bytes_invalid=0 send_seq=142582 receive_seq=142582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.1 pwm=0.044 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1898047 sysload=0.24 cputime=348.013 memavail=1626152 print_time=7416.568 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 7406.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5194417 bytes_read=2507268 bytes_retransmit=9 bytes_invalid=0 send_seq=142615 receive_seq=142615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1899276 sysload=0.24 cputime=348.085 memavail=1626264 print_time=7417.770 buffer_time=2.273 print_stall=0 extruder: target=215 temp=214.9 pwm=0.514
Stats 7407.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5194988 bytes_read=2507650 bytes_retransmit=9 bytes_invalid=0 send_seq=142634 receive_seq=142634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.276 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1899458 sysload=0.24 cputime=348.141 memavail=1626476 print_time=7418.668 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.0 pwm=0.460
Stats 7408.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5196418 bytes_read=2508127 bytes_retransmit=9 bytes_invalid=0 send_seq=142666 receive_seq=142666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=61.3 mcu_temp: temp=43.9 sd_pos=1900961 sysload=0.24 cputime=348.215 memavail=1626676 print_time=7419.737 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 7409.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5198002 bytes_read=2508638 bytes_retransmit=9 bytes_invalid=0 send_seq=142705 receive_seq=142705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=61.3 mcu_temp: temp=44.5 sd_pos=1903326 sysload=0.24 cputime=348.305 memavail=1626672 print_time=7420.509 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 7410.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5200292 bytes_read=2509160 bytes_retransmit=9 bytes_invalid=0 send_seq=142752 receive_seq=142752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1906062 sysload=0.22 cputime=348.399 memavail=1626924 print_time=7421.742 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.2 pwm=0.370
Stats 7411.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5202392 bytes_read=2509677 bytes_retransmit=9 bytes_invalid=0 send_seq=142795 receive_seq=142795 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1907361 sysload=0.22 cputime=348.461 memavail=1626752 print_time=7422.499 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 7412.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=5205157 bytes_read=2510273 bytes_retransmit=9 bytes_invalid=0 send_seq=142851 receive_seq=142851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.413 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1907893 sysload=0.22 cputime=348.526 memavail=1626728 print_time=7423.892 buffer_time=2.392 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 7413.8: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000058 bytes_write=5206427 bytes_read=2510731 bytes_retransmit=9 bytes_invalid=0 send_seq=142882 receive_seq=142882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.327 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1908162 sysload=0.22 cputime=348.589 memavail=1626564 print_time=7424.618 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 7414.8: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000058 bytes_write=5207974 bytes_read=2511208 bytes_retransmit=9 bytes_invalid=0 send_seq=142917 receive_seq=142917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1908370 sysload=0.22 cputime=348.649 memavail=1626560 print_time=7425.679 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 7415.8: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000058 bytes_write=5209247 bytes_read=2511674 bytes_retransmit=9 bytes_invalid=0 send_seq=142947 receive_seq=142947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.322 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1908546 sysload=0.21 cputime=348.694 memavail=1626944 print_time=7426.611 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.1 pwm=0.402
Stats 7416.8: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000058 bytes_write=5210405 bytes_read=2512096 bytes_retransmit=9 bytes_invalid=0 send_seq=142974 receive_seq=142974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.037 rpi: temp=60.9 mcu_temp: temp=43.8 sd_pos=1908725 sysload=0.21 cputime=348.747 memavail=1627172 print_time=7427.622 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 7417.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5211630 bytes_read=2512558 bytes_retransmit=9 bytes_invalid=0 send_seq=143003 receive_seq=143003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.055 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1908935 sysload=0.21 cputime=348.809 memavail=1627012 print_time=7428.676 buffer_time=2.172 print_stall=0 extruder: target=215 temp=215.0 pwm=0.481
Stats 7418.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5212805 bytes_read=2513009 bytes_retransmit=9 bytes_invalid=0 send_seq=143030 receive_seq=143030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.1 pwm=0.187 rpi: temp=61.3 mcu_temp: temp=44.5 sd_pos=1909165 sysload=0.21 cputime=348.873 memavail=1626896 print_time=7429.795 buffer_time=2.291 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 7419.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5214015 bytes_read=2513441 bytes_retransmit=9 bytes_invalid=0 send_seq=143059 receive_seq=143059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1909432 sysload=0.21 cputime=348.929 memavail=1627144 print_time=7430.561 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.1 pwm=0.381
Stats 7420.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5217689 bytes_read=2514098 bytes_retransmit=9 bytes_invalid=0 send_seq=143130 receive_seq=143130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=54.9 pwm=0.514 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=1910644 sysload=0.35 cputime=349.003 memavail=1626932 print_time=7431.676 buffer_time=2.171 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 7421.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5220083 bytes_read=2514664 bytes_retransmit=9 bytes_invalid=0 send_seq=143180 receive_seq=143180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1911301 sysload=0.35 cputime=349.068 memavail=1626832 print_time=7432.689 buffer_time=2.183 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 7422.8: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=5224036 bytes_read=2515326 bytes_retransmit=9 bytes_invalid=0 send_seq=143255 receive_seq=143255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.296 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1912784 sysload=0.35 cputime=349.153 memavail=1627204 print_time=7433.952 buffer_time=2.445 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 7423.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=5226217 bytes_read=2515874 bytes_retransmit=9 bytes_invalid=0 send_seq=143301 receive_seq=143301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=1914009 sysload=0.35 cputime=349.224 memavail=1627220 print_time=7434.768 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 7424.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=5227529 bytes_read=2516345 bytes_retransmit=9 bytes_invalid=0 send_seq=143332 receive_seq=143332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=54.9 pwm=0.677 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1914225 sysload=0.35 cputime=349.285 memavail=1627480 print_time=7435.770 buffer_time=2.262 print_stall=0 extruder: target=215 temp=214.9 pwm=0.511
Stats 7425.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=5228699 bytes_read=2516767 bytes_retransmit=9 bytes_invalid=0 send_seq=143359 receive_seq=143359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1914440 sysload=0.40 cputime=349.333 memavail=1627412 print_time=7436.836 buffer_time=2.328 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 7426.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=5229648 bytes_read=2517209 bytes_retransmit=9 bytes_invalid=0 send_seq=143384 receive_seq=143384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1914593 sysload=0.40 cputime=349.385 memavail=1627368 print_time=7437.609 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.0 pwm=0.418
Stats 7427.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=5230663 bytes_read=2517645 bytes_retransmit=9 bytes_invalid=0 send_seq=143411 receive_seq=143411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=60.9 mcu_temp: temp=44.2 sd_pos=1914746 sysload=0.40 cputime=349.443 memavail=1627384 print_time=7438.709 buffer_time=2.200 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 7428.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5231662 bytes_read=2518072 bytes_retransmit=9 bytes_invalid=0 send_seq=143436 receive_seq=143436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.384 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1914898 sysload=0.40 cputime=349.488 memavail=1627212 print_time=7439.794 buffer_time=2.284 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 7429.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5232601 bytes_read=2518514 bytes_retransmit=9 bytes_invalid=0 send_seq=143461 receive_seq=143461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1915052 sysload=0.40 cputime=349.541 memavail=1627460 print_time=7440.951 buffer_time=2.441 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 7430.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5233580 bytes_read=2518940 bytes_retransmit=9 bytes_invalid=0 send_seq=143486 receive_seq=143486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1915237 sysload=0.37 cputime=349.597 memavail=1627464 print_time=7442.023 buffer_time=2.511 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 7431.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5234219 bytes_read=2519327 bytes_retransmit=9 bytes_invalid=0 send_seq=143506 receive_seq=143506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1915330 sysload=0.37 cputime=349.653 memavail=1626920 print_time=7442.548 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 7432.8: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5235186 bytes_read=2519774 bytes_retransmit=9 bytes_invalid=0 send_seq=143532 receive_seq=143532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.1 pwm=0.105 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1915485 sysload=0.37 cputime=349.709 memavail=1626900 print_time=7443.578 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 7433.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=5236242 bytes_read=2520225 bytes_retransmit=9 bytes_invalid=0 send_seq=143559 receive_seq=143559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.2 pwm=0.047 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1915643 sysload=0.37 cputime=349.768 memavail=1626728 print_time=7444.536 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 7434.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=5238945 bytes_read=2520787 bytes_retransmit=9 bytes_invalid=0 send_seq=143614 receive_seq=143614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.636 rpi: temp=61.8 mcu_temp: temp=44.3 sd_pos=1917349 sysload=0.37 cputime=349.855 memavail=1626440 print_time=7445.749 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 7435.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=5240535 bytes_read=2521274 bytes_retransmit=9 bytes_invalid=0 send_seq=143648 receive_seq=143648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.1 pwm=0.193 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1917658 sysload=0.34 cputime=349.916 memavail=1626512 print_time=7446.567 buffer_time=2.051 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 7436.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=5242779 bytes_read=2521821 bytes_retransmit=9 bytes_invalid=0 send_seq=143695 receive_seq=143695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=54.9 pwm=0.595 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1918182 sysload=0.34 cputime=349.989 memavail=1626488 print_time=7447.812 buffer_time=2.296 print_stall=0 extruder: target=215 temp=214.9 pwm=0.474
Stats 7437.8: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000054 bytes_write=5246259 bytes_read=2522448 bytes_retransmit=9 bytes_invalid=0 send_seq=143763 receive_seq=143763 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1919687 sysload=0.34 cputime=350.072 memavail=1626572 print_time=7449.013 buffer_time=2.496 print_stall=0 extruder: target=215 temp=214.8 pwm=0.560
Stats 7438.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=5248188 bytes_read=2522976 bytes_retransmit=9 bytes_invalid=0 send_seq=143802 receive_seq=143802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1920663 sysload=0.34 cputime=350.127 memavail=1626608 print_time=7449.769 buffer_time=2.252 print_stall=0 extruder: target=215 temp=214.7 pwm=0.604
Stats 7439.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=5249144 bytes_read=2523412 bytes_retransmit=9 bytes_invalid=0 send_seq=143829 receive_seq=143829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1920840 sysload=0.34 cputime=350.180 memavail=1626512 print_time=7450.644 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.8 pwm=0.470
Stats 7440.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=5250084 bytes_read=2523829 bytes_retransmit=9 bytes_invalid=0 send_seq=143855 receive_seq=143855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=61.3 mcu_temp: temp=44.2 sd_pos=1921017 sysload=0.31 cputime=350.241 memavail=1626316 print_time=7451.584 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.9 pwm=0.386
Stats 7441.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=5251729 bytes_read=2524331 bytes_retransmit=9 bytes_invalid=0 send_seq=143892 receive_seq=143892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.157 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1921464 sysload=0.31 cputime=350.308 memavail=1626080 print_time=7452.983 buffer_time=2.464 print_stall=0 extruder: target=215 temp=214.8 pwm=0.530
Stats 7442.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=5253772 bytes_read=2524847 bytes_retransmit=9 bytes_invalid=0 send_seq=143935 receive_seq=143935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1922603 sysload=0.31 cputime=350.379 memavail=1626264 print_time=7453.763 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.9 pwm=0.497
Stats 7443.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=5255801 bytes_read=2525364 bytes_retransmit=9 bytes_invalid=0 send_seq=143978 receive_seq=143978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1924567 sysload=0.31 cputime=350.460 memavail=1626496 print_time=7454.660 buffer_time=2.139 print_stall=0 extruder: target=215 temp=214.9 pwm=0.497
Stats 7444.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=5258091 bytes_read=2525916 bytes_retransmit=9 bytes_invalid=0 send_seq=144025 receive_seq=144025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1926864 sysload=0.31 cputime=350.551 memavail=1626540 print_time=7455.557 buffer_time=2.036 print_stall=0 extruder: target=215 temp=214.8 pwm=0.550
Stats 7445.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=5261696 bytes_read=2526572 bytes_retransmit=9 bytes_invalid=0 send_seq=144096 receive_seq=144096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.505 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1928707 sysload=0.29 cputime=350.638 memavail=1627028 print_time=7456.959 buffer_time=2.436 print_stall=0 extruder: target=215 temp=215.1 pwm=0.375
Stats 7446.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=5263114 bytes_read=2527028 bytes_retransmit=9 bytes_invalid=0 send_seq=144130 receive_seq=144130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=60.9 mcu_temp: temp=44.2 sd_pos=1929444 sysload=0.29 cputime=350.703 memavail=1626832 print_time=7457.589 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.1 pwm=0.375
Stats 7447.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000054 bytes_write=5265782 bytes_read=2527597 bytes_retransmit=9 bytes_invalid=0 send_seq=144183 receive_seq=144183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1931169 sysload=0.29 cputime=350.788 memavail=1626768 print_time=7458.838 buffer_time=2.314 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 7448.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5266821 bytes_read=2528033 bytes_retransmit=9 bytes_invalid=0 send_seq=144209 receive_seq=144209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.237 rpi: temp=61.3 mcu_temp: temp=44.5 sd_pos=1931581 sysload=0.29 cputime=350.853 memavail=1627040 print_time=7459.650 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 7449.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5267955 bytes_read=2528460 bytes_retransmit=9 bytes_invalid=0 send_seq=144239 receive_seq=144239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1932324 sysload=0.29 cputime=350.920 memavail=1627292 print_time=7460.681 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7450.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5270546 bytes_read=2529025 bytes_retransmit=9 bytes_invalid=0 send_seq=144290 receive_seq=144290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.1 pwm=0.042 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1934554 sysload=0.26 cputime=351.010 memavail=1627548 print_time=7461.762 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 7451.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5272382 bytes_read=2529531 bytes_retransmit=9 bytes_invalid=0 send_seq=144331 receive_seq=144331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=60.9 mcu_temp: temp=44.0 sd_pos=1936371 sysload=0.26 cputime=351.091 memavail=1627788 print_time=7462.533 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.502
Stats 7452.8: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5274601 bytes_read=2530053 bytes_retransmit=9 bytes_invalid=0 send_seq=144378 receive_seq=144378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=54.9 pwm=0.585 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1938212 sysload=0.26 cputime=351.179 memavail=1627800 print_time=7463.696 buffer_time=2.170 print_stall=0 extruder: target=215 temp=215.0 pwm=0.552
Stats 7453.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=5275927 bytes_read=2530545 bytes_retransmit=9 bytes_invalid=0 send_seq=144410 receive_seq=144410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1939388 sysload=0.26 cputime=351.255 memavail=1627380 print_time=7464.631 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 7454.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=5276807 bytes_read=2530966 bytes_retransmit=9 bytes_invalid=0 send_seq=144434 receive_seq=144434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1939812 sysload=0.26 cputime=351.317 memavail=1627356 print_time=7465.684 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 7455.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=5279101 bytes_read=2531493 bytes_retransmit=9 bytes_invalid=0 send_seq=144482 receive_seq=144482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1940942 sysload=0.32 cputime=351.390 memavail=1627540 print_time=7466.737 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.2 pwm=0.404
Stats 7456.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=5281388 bytes_read=2532050 bytes_retransmit=9 bytes_invalid=0 send_seq=144530 receive_seq=144530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.023 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=1942695 sysload=0.32 cputime=351.473 memavail=1627480 print_time=7467.626 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 7457.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=5283043 bytes_read=2532531 bytes_retransmit=9 bytes_invalid=0 send_seq=144566 receive_seq=144566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=1944702 sysload=0.32 cputime=351.559 memavail=1627052 print_time=7468.668 buffer_time=2.139 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 7458.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=5284352 bytes_read=2532993 bytes_retransmit=9 bytes_invalid=0 send_seq=144598 receive_seq=144598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=54.7 pwm=1.000 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1945403 sysload=0.32 cputime=351.625 memavail=1627068 print_time=7469.727 buffer_time=2.197 print_stall=0 extruder: target=215 temp=214.9 pwm=0.551
Stats 7459.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=5285695 bytes_read=2533470 bytes_retransmit=9 bytes_invalid=0 send_seq=144630 receive_seq=144630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=1946206 sysload=0.32 cputime=351.700 memavail=1627004 print_time=7470.757 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 7460.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=5287868 bytes_read=2533991 bytes_retransmit=9 bytes_invalid=0 send_seq=144679 receive_seq=144674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=54.9 pwm=0.381 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=1948655 sysload=0.38 cputime=351.787 memavail=1626920 print_time=7471.824 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.0 pwm=0.539
Stats 7461.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=5289935 bytes_read=2534523 bytes_retransmit=9 bytes_invalid=0 send_seq=144723 receive_seq=144723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=61.8 mcu_temp: temp=44.0 sd_pos=1950636 sysload=0.38 cputime=351.868 memavail=1626548 print_time=7472.632 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7462.8: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000053 bytes_write=5292223 bytes_read=2535075 bytes_retransmit=9 bytes_invalid=0 send_seq=144770 receive_seq=144770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.371 rpi: temp=61.8 mcu_temp: temp=44.6 sd_pos=1953382 sysload=0.38 cputime=351.961 memavail=1626624 print_time=7473.600 buffer_time=2.063 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7463.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5294408 bytes_read=2535617 bytes_retransmit=9 bytes_invalid=0 send_seq=144815 receive_seq=144815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1955043 sysload=0.38 cputime=352.043 memavail=1626548 print_time=7474.725 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.392
Stats 7464.8: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5295159 bytes_read=2536019 bytes_retransmit=9 bytes_invalid=0 send_seq=144838 receive_seq=144838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1955588 sysload=0.38 cputime=352.108 memavail=1627088 print_time=7475.813 buffer_time=2.275 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 7465.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5297164 bytes_read=2536561 bytes_retransmit=9 bytes_invalid=0 send_seq=144883 receive_seq=144883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1957696 sysload=0.35 cputime=352.191 memavail=1626556 print_time=7476.604 buffer_time=2.065 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 7466.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5299432 bytes_read=2537102 bytes_retransmit=9 bytes_invalid=0 send_seq=144931 receive_seq=144931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1959022 sysload=0.35 cputime=352.269 memavail=1626732 print_time=7477.570 buffer_time=2.030 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 7467.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5302545 bytes_read=2537694 bytes_retransmit=9 bytes_invalid=0 send_seq=144992 receive_seq=144992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=54.9 pwm=0.672 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=1960903 sysload=0.35 cputime=352.356 memavail=1626684 print_time=7478.784 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.1 pwm=0.383
Stats 7468.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=5304112 bytes_read=2538202 bytes_retransmit=9 bytes_invalid=0 send_seq=145027 receive_seq=145027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.045 rpi: temp=60.4 mcu_temp: temp=44.9 sd_pos=1963133 sysload=0.35 cputime=352.435 memavail=1626240 print_time=7479.545 buffer_time=2.003 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 7469.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=5306950 bytes_read=2538783 bytes_retransmit=9 bytes_invalid=0 send_seq=145083 receive_seq=145083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1965552 sysload=0.35 cputime=352.523 memavail=1626560 print_time=7480.636 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.0 pwm=0.471
Stats 7470.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=5308734 bytes_read=2539265 bytes_retransmit=9 bytes_invalid=0 send_seq=145122 receive_seq=145122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.275 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1967796 sysload=0.32 cputime=352.606 memavail=1626092 print_time=7481.629 buffer_time=2.086 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 7471.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=5311187 bytes_read=2539842 bytes_retransmit=9 bytes_invalid=0 send_seq=145174 receive_seq=145174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.077 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=1969154 sysload=0.32 cputime=352.686 memavail=1626804 print_time=7482.594 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.2 pwm=0.427
Stats 7472.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=5312822 bytes_read=2540328 bytes_retransmit=9 bytes_invalid=0 send_seq=145211 receive_seq=145211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.436 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1971228 sysload=0.32 cputime=352.773 memavail=1627060 print_time=7483.625 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 7473.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5314511 bytes_read=2540821 bytes_retransmit=9 bytes_invalid=0 send_seq=145249 receive_seq=145249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=1972663 sysload=0.32 cputime=352.850 memavail=1627112 print_time=7484.581 buffer_time=2.036 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 7474.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5315371 bytes_read=2541253 bytes_retransmit=9 bytes_invalid=0 send_seq=145272 receive_seq=145272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=61.8 mcu_temp: temp=44.7 sd_pos=1973100 sysload=0.32 cputime=352.916 memavail=1626972 print_time=7485.813 buffer_time=2.267 print_stall=0 extruder: target=215 temp=214.8 pwm=0.554
Stats 7475.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5316067 bytes_read=2541654 bytes_retransmit=9 bytes_invalid=0 send_seq=145292 receive_seq=145292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=1973452 sysload=0.29 cputime=352.962 memavail=1627052 print_time=7486.894 buffer_time=2.348 print_stall=0 extruder: target=215 temp=214.9 pwm=0.434
Stats 7476.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5317461 bytes_read=2542106 bytes_retransmit=9 bytes_invalid=0 send_seq=145325 receive_seq=145325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1974890 sysload=0.29 cputime=353.032 memavail=1627000 print_time=7487.656 buffer_time=2.108 print_stall=0 extruder: target=215 temp=214.9 pwm=0.544
Stats 7477.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5319519 bytes_read=2542648 bytes_retransmit=9 bytes_invalid=0 send_seq=145370 receive_seq=145370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.440 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1977125 sysload=0.29 cputime=353.123 memavail=1626812 print_time=7488.783 buffer_time=2.235 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 7478.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5320859 bytes_read=2543119 bytes_retransmit=9 bytes_invalid=0 send_seq=145401 receive_seq=145401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1978258 sysload=0.29 cputime=353.192 memavail=1626816 print_time=7489.611 buffer_time=2.062 print_stall=0 extruder: target=215 temp=214.9 pwm=0.488
Stats 7479.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5321523 bytes_read=2543511 bytes_retransmit=9 bytes_invalid=0 send_seq=145422 receive_seq=145422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=1978495 sysload=0.29 cputime=353.252 memavail=1626704 print_time=7490.682 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 7480.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5322639 bytes_read=2543968 bytes_retransmit=9 bytes_invalid=0 send_seq=145450 receive_seq=145450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.092 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1979653 sysload=0.27 cputime=353.325 memavail=1626816 print_time=7491.779 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 7481.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5324184 bytes_read=2544449 bytes_retransmit=9 bytes_invalid=0 send_seq=145486 receive_seq=145486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.001 rpi: temp=61.3 mcu_temp: temp=44.5 sd_pos=1981990 sysload=0.27 cputime=353.410 memavail=1626772 print_time=7492.551 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 7482.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5326272 bytes_read=2544951 bytes_retransmit=9 bytes_invalid=0 send_seq=145529 receive_seq=145529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=54.9 pwm=0.516 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1984639 sysload=0.27 cputime=353.511 memavail=1626712 print_time=7493.729 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 7483.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=5328294 bytes_read=2545503 bytes_retransmit=9 bytes_invalid=0 send_seq=145573 receive_seq=145573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=1985547 sysload=0.27 cputime=353.583 memavail=1627044 print_time=7494.641 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 7484.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=5330688 bytes_read=2546059 bytes_retransmit=9 bytes_invalid=0 send_seq=145624 receive_seq=145624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.421 rpi: temp=61.3 mcu_temp: temp=44.5 sd_pos=1986111 sysload=0.27 cputime=353.648 memavail=1626720 print_time=7495.671 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.0 pwm=0.536
Stats 7485.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=5332277 bytes_read=2546531 bytes_retransmit=9 bytes_invalid=0 send_seq=145661 receive_seq=145661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.198 rpi: temp=61.3 mcu_temp: temp=44.5 sd_pos=1986445 sysload=0.25 cputime=353.713 memavail=1627160 print_time=7496.717 buffer_time=2.164 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 7486.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=5333579 bytes_read=2547008 bytes_retransmit=9 bytes_invalid=0 send_seq=145693 receive_seq=145693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.442 rpi: temp=60.4 mcu_temp: temp=44.8 sd_pos=1986660 sysload=0.25 cputime=353.763 memavail=1626904 print_time=7497.567 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.1 pwm=0.500
Stats 7487.9: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000049 bytes_write=5335155 bytes_read=2547494 bytes_retransmit=9 bytes_invalid=0 send_seq=145730 receive_seq=145730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.344 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=1987028 sysload=0.25 cputime=353.821 memavail=1627016 print_time=7498.758 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.2 pwm=0.351
Stats 7488.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=5336380 bytes_read=2547946 bytes_retransmit=9 bytes_invalid=0 send_seq=145760 receive_seq=145760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=1987272 sysload=0.25 cputime=353.879 memavail=1626664 print_time=7499.771 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.1 pwm=0.520
Stats 7489.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=5337327 bytes_read=2548388 bytes_retransmit=9 bytes_invalid=0 send_seq=145785 receive_seq=145785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.296 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=1987427 sysload=0.25 cputime=353.936 memavail=1626712 print_time=7500.569 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 7490.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=5338556 bytes_read=2548844 bytes_retransmit=9 bytes_invalid=0 send_seq=145816 receive_seq=145816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.2 pwm=0.044 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=1987637 sysload=0.23 cputime=353.995 memavail=1626656 print_time=7501.686 buffer_time=2.128 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 7491.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=5339933 bytes_read=2549286 bytes_retransmit=9 bytes_invalid=0 send_seq=145847 receive_seq=145847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.418 rpi: temp=60.9 mcu_temp: temp=44.9 sd_pos=1987977 sysload=0.23 cputime=354.055 memavail=1626640 print_time=7502.837 buffer_time=2.278 print_stall=0 extruder: target=215 temp=215.2 pwm=0.423
Stats 7492.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=5340899 bytes_read=2549748 bytes_retransmit=9 bytes_invalid=0 send_seq=145876 receive_seq=145876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=54.9 pwm=0.564 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1988129 sysload=0.23 cputime=354.117 memavail=1626920 print_time=7503.835 buffer_time=2.276 print_stall=0 extruder: target=215 temp=215.0 pwm=0.578
Stats 7493.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=5341790 bytes_read=2550199 bytes_retransmit=9 bytes_invalid=0 send_seq=145903 receive_seq=145903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1988282 sysload=0.23 cputime=354.176 memavail=1626928 print_time=7504.828 buffer_time=2.269 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 7494.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=5342652 bytes_read=2550606 bytes_retransmit=9 bytes_invalid=0 send_seq=145927 receive_seq=145927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1988498 sysload=0.23 cputime=354.232 memavail=1627056 print_time=7505.721 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 7495.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=5344580 bytes_read=2551138 bytes_retransmit=9 bytes_invalid=0 send_seq=145970 receive_seq=145970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=1989040 sysload=0.21 cputime=354.281 memavail=1626640 print_time=7506.735 buffer_time=2.175 print_stall=0 extruder: target=215 temp=215.2 pwm=0.405
Stats 7496.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=5348274 bytes_read=2551789 bytes_retransmit=9 bytes_invalid=0 send_seq=146041 receive_seq=146040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=1991022 sysload=0.21 cputime=354.366 memavail=1626668 print_time=7507.919 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 7497.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=5350012 bytes_read=2552277 bytes_retransmit=9 bytes_invalid=0 send_seq=146078 receive_seq=146078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=54.8 pwm=0.677 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=1991441 sysload=0.21 cputime=354.432 memavail=1626748 print_time=7508.898 buffer_time=2.336 print_stall=0 extruder: target=215 temp=215.0 pwm=0.544
Stats 7498.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5351522 bytes_read=2552784 bytes_retransmit=9 bytes_invalid=0 send_seq=146113 receive_seq=146113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1991736 sysload=0.21 cputime=354.493 memavail=1626716 print_time=7509.767 buffer_time=2.205 print_stall=0 extruder: target=215 temp=215.2 pwm=0.434
Stats 7499.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5353601 bytes_read=2553290 bytes_retransmit=9 bytes_invalid=0 send_seq=146154 receive_seq=146154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=1992206 sysload=0.21 cputime=354.554 memavail=1626708 print_time=7511.009 buffer_time=2.446 print_stall=0 extruder: target=215 temp=214.9 pwm=0.558
Stats 7500.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5354776 bytes_read=2553717 bytes_retransmit=9 bytes_invalid=0 send_seq=146182 receive_seq=146182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=54.9 pwm=0.387 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=1992443 sysload=0.19 cputime=354.611 memavail=1626980 print_time=7511.811 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 7501.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5355990 bytes_read=2554179 bytes_retransmit=9 bytes_invalid=0 send_seq=146211 receive_seq=146211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=54.8 pwm=0.709 rpi: temp=61.3 mcu_temp: temp=44.9 sd_pos=1992592 sysload=0.19 cputime=354.656 memavail=1626784 print_time=7512.708 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.8 pwm=0.569
Stats 7502.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5357155 bytes_read=2554615 bytes_retransmit=9 bytes_invalid=0 send_seq=146238 receive_seq=146238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.111 rpi: temp=60.9 mcu_temp: temp=44.9 sd_pos=1992799 sysload=0.19 cputime=354.711 memavail=1626980 print_time=7513.751 buffer_time=2.186 print_stall=0 extruder: target=215 temp=215.1 pwm=0.380
Stats 7503.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=5358244 bytes_read=2555052 bytes_retransmit=9 bytes_invalid=0 send_seq=146265 receive_seq=146265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=1993006 sysload=0.19 cputime=354.771 memavail=1626928 print_time=7514.885 buffer_time=2.320 print_stall=0 extruder: target=215 temp=215.0 pwm=0.497
Stats 7504.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=5359138 bytes_read=2555484 bytes_retransmit=9 bytes_invalid=0 send_seq=146288 receive_seq=146288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=1993156 sysload=0.19 cputime=354.828 memavail=1626588 print_time=7515.774 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 7505.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=5360003 bytes_read=2555895 bytes_retransmit=9 bytes_invalid=0 send_seq=146310 receive_seq=146310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=61.3 mcu_temp: temp=44.3 sd_pos=1993334 sysload=0.18 cputime=354.886 memavail=1626748 print_time=7516.688 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 7506.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=5361085 bytes_read=2556315 bytes_retransmit=9 bytes_invalid=0 send_seq=146338 receive_seq=146338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=1993573 sysload=0.18 cputime=354.945 memavail=1626416 print_time=7517.956 buffer_time=2.389 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 7507.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000040 bytes_write=5362679 bytes_read=2556807 bytes_retransmit=9 bytes_invalid=0 send_seq=146373 receive_seq=146373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.183 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=1994302 sysload=0.18 cputime=355.014 memavail=1626376 print_time=7519.051 buffer_time=2.484 print_stall=0 extruder: target=215 temp=215.1 pwm=0.406
Stats 7508.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=5364591 bytes_read=2557304 bytes_retransmit=9 bytes_invalid=0 send_seq=146414 receive_seq=146414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.434 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=1995684 sysload=0.18 cputime=355.082 memavail=1626804 print_time=7519.689 buffer_time=2.121 print_stall=0 extruder: target=215 temp=215.1 pwm=0.387
Stats 7509.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=5366904 bytes_read=2557821 bytes_retransmit=9 bytes_invalid=0 send_seq=146462 receive_seq=146462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=1996148 sysload=0.18 cputime=355.142 memavail=1626340 print_time=7520.585 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 7510.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=5368851 bytes_read=2558354 bytes_retransmit=9 bytes_invalid=0 send_seq=146503 receive_seq=146503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.026 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=1996738 sysload=0.16 cputime=355.208 memavail=1626644 print_time=7521.580 buffer_time=2.010 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 7511.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=5373273 bytes_read=2559061 bytes_retransmit=9 bytes_invalid=0 send_seq=146587 receive_seq=146587 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.9 pwm=0.618 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=1998761 sysload=0.16 cputime=355.284 memavail=1626136 print_time=7523.060 buffer_time=2.490 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 7512.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000055 bytes_write=5374885 bytes_read=2559533 bytes_retransmit=9 bytes_invalid=0 send_seq=146624 receive_seq=146624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.268 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=2000023 sysload=0.16 cputime=355.355 memavail=1626396 print_time=7523.679 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.0 pwm=0.414
Stats 7513.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5377027 bytes_read=2560095 bytes_retransmit=9 bytes_invalid=0 send_seq=146667 receive_seq=146667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.163 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2002207 sysload=0.16 cputime=355.439 memavail=1626300 print_time=7524.598 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.0 pwm=0.401
Stats 7514.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5379925 bytes_read=2560667 bytes_retransmit=9 bytes_invalid=0 send_seq=146724 receive_seq=146724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.255 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=2004505 sysload=0.16 cputime=355.527 memavail=1626412 print_time=7525.707 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 7515.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5382415 bytes_read=2561209 bytes_retransmit=9 bytes_invalid=0 send_seq=146775 receive_seq=146775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=61.3 mcu_temp: temp=44.9 sd_pos=2005804 sysload=0.15 cputime=355.583 memavail=1626052 print_time=7526.668 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7516.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5384816 bytes_read=2561790 bytes_retransmit=9 bytes_invalid=0 send_seq=146825 receive_seq=146825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=54.9 pwm=0.549 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=2006851 sysload=0.15 cputime=355.648 memavail=1625964 print_time=7527.688 buffer_time=2.115 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7517.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5386703 bytes_read=2562272 bytes_retransmit=9 bytes_invalid=0 send_seq=146864 receive_seq=146864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=45.1 sd_pos=2008132 sysload=0.15 cputime=355.719 memavail=1626156 print_time=7528.612 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.0 pwm=0.429
Stats 7518.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5388515 bytes_read=2562785 bytes_retransmit=9 bytes_invalid=0 send_seq=146903 receive_seq=146903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2009044 sysload=0.15 cputime=355.791 memavail=1626792 print_time=7529.745 buffer_time=2.167 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 7519.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5389608 bytes_read=2563236 bytes_retransmit=9 bytes_invalid=0 send_seq=146930 receive_seq=146930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.345 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=2009725 sysload=0.15 cputime=355.854 memavail=1626920 print_time=7530.781 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 7520.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5392234 bytes_read=2563778 bytes_retransmit=9 bytes_invalid=0 send_seq=146981 receive_seq=146981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=2012013 sysload=0.14 cputime=355.937 memavail=1626716 print_time=7531.866 buffer_time=2.285 print_stall=0 extruder: target=215 temp=215.1 pwm=0.398
Stats 7521.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5393986 bytes_read=2564265 bytes_retransmit=9 bytes_invalid=0 send_seq=147018 receive_seq=147018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.9 sd_pos=2013769 sysload=0.14 cputime=355.997 memavail=1626608 print_time=7532.640 buffer_time=2.058 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 7522.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5396047 bytes_read=2564806 bytes_retransmit=9 bytes_invalid=0 send_seq=147063 receive_seq=147063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=61.3 mcu_temp: temp=44.4 sd_pos=2015323 sysload=0.14 cputime=356.068 memavail=1627060 print_time=7533.585 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7523.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=5397475 bytes_read=2565268 bytes_retransmit=9 bytes_invalid=0 send_seq=147095 receive_seq=147095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=54.9 pwm=0.605 rpi: temp=61.3 mcu_temp: temp=44.2 sd_pos=2016721 sysload=0.14 cputime=356.142 memavail=1627244 print_time=7534.682 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7524.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=5398147 bytes_read=2565675 bytes_retransmit=9 bytes_invalid=0 send_seq=147116 receive_seq=147116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.027 rpi: temp=61.3 mcu_temp: temp=44.3 sd_pos=2017061 sysload=0.14 cputime=356.191 memavail=1626984 print_time=7535.595 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.0 pwm=0.473
Stats 7525.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=5400353 bytes_read=2566221 bytes_retransmit=9 bytes_invalid=0 send_seq=147162 receive_seq=147162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2018210 sysload=0.13 cputime=356.245 memavail=1626552 print_time=7536.632 buffer_time=2.049 print_stall=0 extruder: target=215 temp=214.8 pwm=0.625
Stats 7526.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=5403164 bytes_read=2566798 bytes_retransmit=9 bytes_invalid=0 send_seq=147220 receive_seq=147220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.338 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=2020342 sysload=0.13 cputime=356.329 memavail=1627084 print_time=7537.804 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 7527.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=5404461 bytes_read=2567250 bytes_retransmit=9 bytes_invalid=0 send_seq=147250 receive_seq=147250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=54.9 pwm=0.379 rpi: temp=61.8 mcu_temp: temp=44.6 sd_pos=2021948 sysload=0.13 cputime=356.403 memavail=1627316 print_time=7538.588 buffer_time=2.004 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 7528.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=5405737 bytes_read=2567721 bytes_retransmit=9 bytes_invalid=0 send_seq=147278 receive_seq=147278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=61.8 mcu_temp: temp=44.8 sd_pos=2022737 sysload=0.13 cputime=356.471 memavail=1627284 print_time=7539.643 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 7529.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=5406761 bytes_read=2568138 bytes_retransmit=9 bytes_invalid=0 send_seq=147304 receive_seq=147304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=54.9 pwm=0.506 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=2023629 sysload=0.13 cputime=356.537 memavail=1627372 print_time=7540.637 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 7530.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=5408979 bytes_read=2568675 bytes_retransmit=9 bytes_invalid=0 send_seq=147351 receive_seq=147351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=2026077 sysload=0.12 cputime=356.623 memavail=1627284 print_time=7541.704 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 7531.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=5411858 bytes_read=2569271 bytes_retransmit=9 bytes_invalid=0 send_seq=147407 receive_seq=147407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.6 sd_pos=2028828 sysload=0.12 cputime=356.721 memavail=1627048 print_time=7542.791 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 7532.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=5413673 bytes_read=2569758 bytes_retransmit=9 bytes_invalid=0 send_seq=147447 receive_seq=147447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.178 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=2031605 sysload=0.12 cputime=356.808 memavail=1627040 print_time=7543.581 buffer_time=1.990 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 7533.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5415745 bytes_read=2570296 bytes_retransmit=9 bytes_invalid=0 send_seq=147491 receive_seq=147491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=2032407 sysload=0.12 cputime=356.878 memavail=1627080 print_time=7544.614 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 7534.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5416490 bytes_read=2570717 bytes_retransmit=9 bytes_invalid=0 send_seq=147512 receive_seq=147512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=44.8 sd_pos=2032866 sysload=0.12 cputime=356.941 memavail=1627432 print_time=7545.633 buffer_time=2.040 print_stall=0 extruder: target=215 temp=214.8 pwm=0.546
Stats 7535.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5418918 bytes_read=2571244 bytes_retransmit=9 bytes_invalid=0 send_seq=147560 receive_seq=147560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.044 rpi: temp=60.4 mcu_temp: temp=44.3 sd_pos=2035553 sysload=0.11 cputime=357.010 memavail=1627668 print_time=7546.647 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.8 pwm=0.572
Stats 7536.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5421487 bytes_read=2571801 bytes_retransmit=9 bytes_invalid=0 send_seq=147611 receive_seq=147611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=2037712 sysload=0.11 cputime=357.085 memavail=1627188 print_time=7547.805 buffer_time=2.211 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 7537.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5423480 bytes_read=2572317 bytes_retransmit=9 bytes_invalid=0 send_seq=147651 receive_seq=147651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.152 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=2040638 sysload=0.11 cputime=357.183 memavail=1627360 print_time=7548.834 buffer_time=2.239 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 7538.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=5426081 bytes_read=2572880 bytes_retransmit=9 bytes_invalid=0 send_seq=147703 receive_seq=147703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2042747 sysload=0.11 cputime=357.277 memavail=1627340 print_time=7549.689 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7539.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=5428876 bytes_read=2573447 bytes_retransmit=9 bytes_invalid=0 send_seq=147756 receive_seq=147756 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2045041 sysload=0.11 cputime=357.375 memavail=1626856 print_time=7551.116 buffer_time=2.520 print_stall=0 extruder: target=215 temp=214.8 pwm=0.517
Stats 7540.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=5430039 bytes_read=2573903 bytes_retransmit=9 bytes_invalid=0 send_seq=147784 receive_seq=147784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.145 rpi: temp=61.8 mcu_temp: temp=44.8 sd_pos=2046076 sysload=0.10 cputime=357.446 memavail=1626832 print_time=7551.644 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.9 pwm=0.421
Stats 7541.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=5431926 bytes_read=2574390 bytes_retransmit=9 bytes_invalid=0 send_seq=147824 receive_seq=147824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2047979 sysload=0.10 cputime=357.530 memavail=1626628 print_time=7552.843 buffer_time=2.246 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 7542.9: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=5433288 bytes_read=2574847 bytes_retransmit=9 bytes_invalid=0 send_seq=147855 receive_seq=147855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=2049202 sysload=0.10 cputime=357.606 memavail=1626336 print_time=7553.827 buffer_time=2.230 print_stall=0 extruder: target=215 temp=214.9 pwm=0.468
Stats 7543.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5433928 bytes_read=2575273 bytes_retransmit=9 bytes_invalid=0 send_seq=147874 receive_seq=147874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=2049435 sysload=0.10 cputime=357.667 memavail=1626112 print_time=7554.835 buffer_time=2.237 print_stall=0 extruder: target=215 temp=214.9 pwm=0.466
Stats 7544.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5434804 bytes_read=2575675 bytes_retransmit=9 bytes_invalid=0 send_seq=147897 receive_seq=147897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=60.4 mcu_temp: temp=44.9 sd_pos=2050027 sysload=0.10 cputime=357.735 memavail=1626360 print_time=7555.752 buffer_time=2.153 print_stall=0 extruder: target=215 temp=214.9 pwm=0.415
Stats 7545.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5436617 bytes_read=2576172 bytes_retransmit=9 bytes_invalid=0 send_seq=147936 receive_seq=147936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.1 pwm=0.118 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=2051898 sysload=0.09 cputime=357.803 memavail=1626112 print_time=7556.829 buffer_time=2.230 print_stall=0 extruder: target=215 temp=215.0 pwm=0.374
Stats 7546.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5438620 bytes_read=2576648 bytes_retransmit=9 bytes_invalid=0 send_seq=147976 receive_seq=147968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=54.9 pwm=0.271 rpi: temp=60.9 mcu_temp: temp=44.1 sd_pos=2054262 sysload=0.09 cputime=357.864 memavail=1626108 print_time=7557.871 buffer_time=2.271 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 7547.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=5439432 bytes_read=2577095 bytes_retransmit=9 bytes_invalid=0 send_seq=147997 receive_seq=147997 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=2054593 sysload=0.09 cputime=357.923 memavail=1626336 print_time=7558.825 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.0 pwm=0.468
Stats 7548.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=5440038 bytes_read=2577482 bytes_retransmit=9 bytes_invalid=0 send_seq=148014 receive_seq=148014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=61.3 mcu_temp: temp=44.7 sd_pos=2054808 sysload=0.09 cputime=357.984 memavail=1626648 print_time=7559.689 buffer_time=2.087 print_stall=0 extruder: target=215 temp=215.1 pwm=0.392
Stats 7549.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=5441584 bytes_read=2577968 bytes_retransmit=9 bytes_invalid=0 send_seq=148048 receive_seq=148048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.1 pwm=0.068 rpi: temp=62.3 mcu_temp: temp=44.5 sd_pos=2056836 sysload=0.09 cputime=358.076 memavail=1626340 print_time=7560.732 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 7550.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=5443325 bytes_read=2578440 bytes_retransmit=9 bytes_invalid=0 send_seq=148085 receive_seq=148085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2059059 sysload=0.08 cputime=358.167 memavail=1626456 print_time=7561.771 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7551.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=5445842 bytes_read=2578992 bytes_retransmit=9 bytes_invalid=0 send_seq=148135 receive_seq=148135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.075 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=2061178 sysload=0.08 cputime=358.259 memavail=1626160 print_time=7562.864 buffer_time=2.260 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7552.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000024 mcu_task_stddev=0.000054 bytes_write=5448126 bytes_read=2579533 bytes_retransmit=9 bytes_invalid=0 send_seq=148180 receive_seq=148180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.453 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=2061594 sysload=0.08 cputime=358.326 memavail=1626460 print_time=7563.811 buffer_time=2.206 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 7553.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5449697 bytes_read=2580010 bytes_retransmit=9 bytes_invalid=0 send_seq=148215 receive_seq=148215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=2061917 sysload=0.08 cputime=358.388 memavail=1626372 print_time=7564.632 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 7554.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5451144 bytes_read=2580467 bytes_retransmit=9 bytes_invalid=0 send_seq=148246 receive_seq=148246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.055 rpi: temp=61.8 mcu_temp: temp=44.6 sd_pos=2062212 sysload=0.08 cputime=358.452 memavail=1626372 print_time=7565.650 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 7555.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5452643 bytes_read=2580938 bytes_retransmit=9 bytes_invalid=0 send_seq=148277 receive_seq=148277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.162 rpi: temp=59.9 mcu_temp: temp=45.0 sd_pos=2062421 sysload=0.08 cputime=358.503 memavail=1626384 print_time=7566.775 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 7556.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5453868 bytes_read=2581370 bytes_retransmit=9 bytes_invalid=0 send_seq=148306 receive_seq=148306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2062599 sysload=0.08 cputime=358.558 memavail=1626364 print_time=7567.708 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 7557.9: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5455008 bytes_read=2581832 bytes_retransmit=9 bytes_invalid=0 send_seq=148332 receive_seq=148332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.041 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=2062776 sysload=0.08 cputime=358.623 memavail=1626316 print_time=7568.692 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 7558.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5456841 bytes_read=2582344 bytes_retransmit=9 bytes_invalid=0 send_seq=148372 receive_seq=148372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=54.9 pwm=0.511 rpi: temp=60.9 mcu_temp: temp=44.4 sd_pos=2063164 sysload=0.08 cputime=358.693 memavail=1626008 print_time=7570.097 buffer_time=2.489 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 7559.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5459809 bytes_read=2582911 bytes_retransmit=9 bytes_invalid=0 send_seq=148428 receive_seq=148428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=54.9 pwm=0.398 rpi: temp=59.4 mcu_temp: temp=45.0 sd_pos=2064291 sysload=0.08 cputime=358.767 memavail=1626256 print_time=7570.900 buffer_time=2.292 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 7560.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5461895 bytes_read=2583443 bytes_retransmit=9 bytes_invalid=0 send_seq=148471 receive_seq=148471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.416 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2064859 sysload=0.07 cputime=358.840 memavail=1626548 print_time=7571.861 buffer_time=2.251 print_stall=0 extruder: target=215 temp=215.0 pwm=0.479
Stats 7561.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5465356 bytes_read=2584069 bytes_retransmit=9 bytes_invalid=0 send_seq=148536 receive_seq=148536 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.163 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2065804 sysload=0.07 cputime=358.896 memavail=1626800 print_time=7572.986 buffer_time=2.376 print_stall=0 extruder: target=215 temp=215.0 pwm=0.528
Stats 7562.9: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5466351 bytes_read=2584491 bytes_retransmit=9 bytes_invalid=0 send_seq=148563 receive_seq=148563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=59.9 mcu_temp: temp=45.0 sd_pos=2065989 sysload=0.07 cputime=358.957 memavail=1627052 print_time=7573.620 buffer_time=2.009 print_stall=0 extruder: target=215 temp=214.9 pwm=0.485
Stats 7563.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5467317 bytes_read=2584949 bytes_retransmit=9 bytes_invalid=0 send_seq=148588 receive_seq=148588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2066139 sysload=0.07 cputime=359.019 memavail=1627076 print_time=7574.633 buffer_time=2.021 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 7564.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5468252 bytes_read=2585375 bytes_retransmit=9 bytes_invalid=0 send_seq=148613 receive_seq=148613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.1 pwm=0.090 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=2066323 sysload=0.07 cputime=359.078 memavail=1627040 print_time=7575.687 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7565.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5469206 bytes_read=2585787 bytes_retransmit=9 bytes_invalid=0 send_seq=148638 receive_seq=148638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.400 rpi: temp=59.4 mcu_temp: temp=44.7 sd_pos=2066476 sysload=0.06 cputime=359.139 memavail=1627364 print_time=7576.733 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.0 pwm=0.451
Stats 7566.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5470131 bytes_read=2586217 bytes_retransmit=9 bytes_invalid=0 send_seq=148663 receive_seq=148663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.8 sd_pos=2066629 sysload=0.06 cputime=359.200 memavail=1626884 print_time=7577.693 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 7567.9: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=5471128 bytes_read=2586632 bytes_retransmit=9 bytes_invalid=0 send_seq=148688 receive_seq=148688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2066845 sysload=0.06 cputime=359.262 memavail=1626852 print_time=7578.664 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.478
Stats 7568.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=5472455 bytes_read=2587074 bytes_retransmit=9 bytes_invalid=0 send_seq=148718 receive_seq=148718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.385 rpi: temp=60.9 mcu_temp: temp=44.3 sd_pos=2067040 sysload=0.06 cputime=359.325 memavail=1626340 print_time=7579.801 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 7569.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=5473679 bytes_read=2587527 bytes_retransmit=9 bytes_invalid=0 send_seq=148747 receive_seq=148747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=2067316 sysload=0.06 cputime=359.391 memavail=1626424 print_time=7580.833 buffer_time=2.217 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 7570.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=5474888 bytes_read=2587968 bytes_retransmit=9 bytes_invalid=0 send_seq=148775 receive_seq=148775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=54.9 pwm=0.359 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=2067500 sysload=0.06 cputime=359.456 memavail=1626416 print_time=7581.754 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.1 pwm=0.417
Stats 7571.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=5476770 bytes_read=2588460 bytes_retransmit=9 bytes_invalid=0 send_seq=148816 receive_seq=148816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=59.9 mcu_temp: temp=44.8 sd_pos=2067867 sysload=0.06 cputime=359.522 memavail=1626156 print_time=7582.902 buffer_time=2.286 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 7572.9: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000057 bytes_write=5478433 bytes_read=2588947 bytes_retransmit=9 bytes_invalid=0 send_seq=148850 receive_seq=148850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996306 heater_bed: target=55 temp=55.0 pwm=0.485 rpi: temp=60.9 mcu_temp: temp=44.7 sd_pos=2068233 sysload=0.06 cputime=359.589 memavail=1626192 print_time=7583.630 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.1 pwm=0.473
Stats 7573.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5481407 bytes_read=2589548 bytes_retransmit=9 bytes_invalid=0 send_seq=148907 receive_seq=148907 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.0 pwm=0.197 rpi: temp=60.4 mcu_temp: temp=44.2 sd_pos=2068911 sysload=0.06 cputime=359.668 memavail=1625920 print_time=7584.836 buffer_time=2.217 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 7574.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5483530 bytes_read=2590065 bytes_retransmit=9 bytes_invalid=0 send_seq=148953 receive_seq=148953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=2069926 sysload=0.06 cputime=359.740 memavail=1625932 print_time=7585.631 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.9 pwm=0.479
Stats 7575.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5486737 bytes_read=2590692 bytes_retransmit=9 bytes_invalid=0 send_seq=149015 receive_seq=149015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996301 heater_bed: target=55 temp=55.1 pwm=0.046 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=2072102 sysload=0.05 cputime=359.811 memavail=1625904 print_time=7586.746 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.0 pwm=0.408
Stats 7576.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5488063 bytes_read=2591148 bytes_retransmit=9 bytes_invalid=0 send_seq=149046 receive_seq=149046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996299 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=60.4 mcu_temp: temp=44.9 sd_pos=2072221 sysload=0.05 cputime=359.867 memavail=1625728 print_time=7587.788 buffer_time=2.167 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 7577.9: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5489003 bytes_read=2591555 bytes_retransmit=9 bytes_invalid=0 send_seq=149070 receive_seq=149070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=55.1 pwm=0.100 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=2072371 sysload=0.05 cputime=359.930 memavail=1625700 print_time=7588.636 buffer_time=2.015 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 7578.9: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000063 bytes_write=5490513 bytes_read=2592058 bytes_retransmit=9 bytes_invalid=0 send_seq=149104 receive_seq=149104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996303 heater_bed: target=55 temp=55.0 pwm=0.194 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=2072818 sysload=0.05 cputime=360.001 memavail=1625944 print_time=7589.710 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.472
Stats 7579.9: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000063 bytes_write=5492919 bytes_read=2592599 bytes_retransmit=9 bytes_invalid=0 send_seq=149152 receive_seq=149152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996306 heater_bed: target=55 temp=54.9 pwm=0.617 rpi: temp=60.4 mcu_temp: temp=44.4 sd_pos=2075670 sysload=0.05 cputime=360.102 memavail=1625864 print_time=7590.784 buffer_time=2.162 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 7580.9: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000063 bytes_write=5495913 bytes_read=2593176 bytes_retransmit=9 bytes_invalid=0 send_seq=149210 receive_seq=149210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.1 pwm=0.161 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=2077964 sysload=0.05 cputime=360.198 memavail=1625848 print_time=7591.944 buffer_time=2.321 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 7581.9: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000063 bytes_write=5498656 bytes_read=2593763 bytes_retransmit=9 bytes_invalid=0 send_seq=149264 receive_seq=149264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=59.4 mcu_temp: temp=44.8 sd_pos=2079476 sysload=0.05 cputime=360.281 memavail=1625324 print_time=7592.932 buffer_time=2.308 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 7582.9: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000030 mcu_task_stddev=0.000063 bytes_write=5500448 bytes_read=2594264 bytes_retransmit=9 bytes_invalid=0 send_seq=149304 receive_seq=149304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.4 sd_pos=2080257 sysload=0.05 cputime=360.351 memavail=1625660 print_time=7593.681 buffer_time=2.057 print_stall=0 extruder: target=215 temp=215.0 pwm=0.420
Stats 7583.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5502449 bytes_read=2594777 bytes_retransmit=9 bytes_invalid=0 send_seq=149346 receive_seq=149346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=60.9 mcu_temp: temp=44.6 sd_pos=2081329 sysload=0.05 cputime=360.428 memavail=1625860 print_time=7594.647 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 7584.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5504462 bytes_read=2595304 bytes_retransmit=9 bytes_invalid=0 send_seq=149388 receive_seq=149388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996301 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=58.9 mcu_temp: temp=44.3 sd_pos=2082509 sysload=0.05 cputime=360.491 memavail=1625636 print_time=7595.663 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7585.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5505259 bytes_read=2595715 bytes_retransmit=9 bytes_invalid=0 send_seq=149410 receive_seq=149410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996299 heater_bed: target=55 temp=55.0 pwm=0.062 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=2082860 sysload=0.04 cputime=360.535 memavail=1625556 print_time=7596.688 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.1 pwm=0.464
Stats 7586.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5507653 bytes_read=2596242 bytes_retransmit=9 bytes_invalid=0 send_seq=149458 receive_seq=149458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996298 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=60.4 mcu_temp: temp=45.0 sd_pos=2084852 sysload=0.04 cputime=360.614 memavail=1625832 print_time=7597.746 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7587.9: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5509864 bytes_read=2596789 bytes_retransmit=9 bytes_invalid=0 send_seq=149504 receive_seq=149504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996296 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=59.9 mcu_temp: temp=44.8 sd_pos=2087153 sysload=0.04 cputime=360.711 memavail=1625880 print_time=7598.778 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 7588.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5511924 bytes_read=2597330 bytes_retransmit=9 bytes_invalid=0 send_seq=149549 receive_seq=149549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996295 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=2088699 sysload=0.04 cputime=360.795 memavail=1626164 print_time=7599.703 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.2 pwm=0.365
Stats 7589.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5513312 bytes_read=2597772 bytes_retransmit=9 bytes_invalid=0 send_seq=149580 receive_seq=149580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996294 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=60.4 mcu_temp: temp=45.2 sd_pos=2090051 sysload=0.04 cputime=360.874 memavail=1626360 print_time=7600.663 buffer_time=2.035 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 7590.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5514038 bytes_read=2598189 bytes_retransmit=9 bytes_invalid=0 send_seq=149600 receive_seq=149600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996295 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=59.9 mcu_temp: temp=44.9 sd_pos=2090391 sysload=0.04 cputime=360.940 memavail=1626356 print_time=7601.679 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.3 pwm=0.349
Stats 7591.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5516280 bytes_read=2598730 bytes_retransmit=9 bytes_invalid=0 send_seq=149648 receive_seq=149648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996295 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=2091800 sysload=0.04 cputime=361.022 memavail=1626604 print_time=7602.692 buffer_time=2.063 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 7592.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5518642 bytes_read=2599262 bytes_retransmit=9 bytes_invalid=0 send_seq=149697 receive_seq=149697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996296 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=2094011 sysload=0.04 cputime=361.118 memavail=1626852 print_time=7603.780 buffer_time=2.150 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 7593.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5520101 bytes_read=2599764 bytes_retransmit=9 bytes_invalid=0 send_seq=149731 receive_seq=149731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996297 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=59.4 mcu_temp: temp=44.7 sd_pos=2095418 sysload=0.04 cputime=361.208 memavail=1626344 print_time=7604.796 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 7594.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5520827 bytes_read=2600180 bytes_retransmit=9 bytes_invalid=0 send_seq=149754 receive_seq=149754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=2095710 sysload=0.04 cputime=361.263 memavail=1626252 print_time=7605.730 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7595.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5522566 bytes_read=2600657 bytes_retransmit=9 bytes_invalid=0 send_seq=149792 receive_seq=149792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=2097397 sysload=0.04 cputime=361.330 memavail=1625796 print_time=7606.645 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 7596.9: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5525081 bytes_read=2601234 bytes_retransmit=9 bytes_invalid=0 send_seq=149844 receive_seq=149844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996303 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=60.9 mcu_temp: temp=44.8 sd_pos=2099849 sysload=0.04 cputime=361.413 memavail=1625508 print_time=7607.740 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.0 pwm=0.477
Stats 7598.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5527429 bytes_read=2601780 bytes_retransmit=9 bytes_invalid=0 send_seq=149893 receive_seq=149893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996303 heater_bed: target=55 temp=54.9 pwm=0.417 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=2103012 sysload=0.04 cputime=361.522 memavail=1625580 print_time=7608.805 buffer_time=2.172 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 7599.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5529743 bytes_read=2602317 bytes_retransmit=9 bytes_invalid=0 send_seq=149940 receive_seq=149940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996303 heater_bed: target=55 temp=55.0 pwm=0.079 rpi: temp=58.4 mcu_temp: temp=45.0 sd_pos=2104946 sysload=0.04 cputime=361.619 memavail=1625772 print_time=7609.770 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.8 pwm=0.566
Stats 7600.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5530454 bytes_read=2602744 bytes_retransmit=9 bytes_invalid=0 send_seq=149962 receive_seq=149962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=59.4 mcu_temp: temp=44.8 sd_pos=2105220 sysload=0.04 cputime=361.677 memavail=1625820 print_time=7610.683 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.8 pwm=0.527
Stats 7601.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5532076 bytes_read=2603230 bytes_retransmit=9 bytes_invalid=0 send_seq=149999 receive_seq=149999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=55.0 pwm=0.190 rpi: temp=59.4 mcu_temp: temp=44.9 sd_pos=2106594 sysload=0.03 cputime=361.753 memavail=1626012 print_time=7611.664 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 7602.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5534752 bytes_read=2603787 bytes_retransmit=9 bytes_invalid=0 send_seq=150053 receive_seq=150053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=59.4 mcu_temp: temp=44.5 sd_pos=2108822 sysload=0.03 cputime=361.852 memavail=1626080 print_time=7612.726 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.9 pwm=0.470
Stats 7603.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5537116 bytes_read=2604354 bytes_retransmit=9 bytes_invalid=0 send_seq=150103 receive_seq=150103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.374 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=2111703 sysload=0.03 cputime=361.961 memavail=1626040 print_time=7613.774 buffer_time=2.138 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 7604.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=5539516 bytes_read=2604921 bytes_retransmit=9 bytes_invalid=0 send_seq=150153 receive_seq=150153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.316 rpi: temp=60.4 mcu_temp: temp=45.0 sd_pos=2114318 sysload=0.03 cputime=362.067 memavail=1626032 print_time=7614.846 buffer_time=2.210 print_stall=0 extruder: target=215 temp=214.9 pwm=0.414
Stats 7605.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=5541450 bytes_read=2605413 bytes_retransmit=9 bytes_invalid=0 send_seq=150194 receive_seq=150194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996306 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=59.4 mcu_temp: temp=44.8 sd_pos=2116111 sysload=0.03 cputime=362.158 memavail=1626360 print_time=7615.678 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.0 pwm=0.392
Stats 7606.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=5544199 bytes_read=2606005 bytes_retransmit=9 bytes_invalid=0 send_seq=150249 receive_seq=150249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=60.4 mcu_temp: temp=44.9 sd_pos=2118030 sysload=0.03 cputime=362.232 memavail=1627096 print_time=7616.803 buffer_time=2.166 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 7607.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=5545692 bytes_read=2606481 bytes_retransmit=9 bytes_invalid=0 send_seq=150284 receive_seq=150284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=54.9 pwm=0.418 rpi: temp=60.4 mcu_temp: temp=44.7 sd_pos=2119895 sysload=0.03 cputime=362.319 memavail=1627104 print_time=7617.861 buffer_time=2.223 print_stall=0 extruder: target=215 temp=214.9 pwm=0.448
Stats 7608.0: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=5547720 bytes_read=2606988 bytes_retransmit=9 bytes_invalid=0 send_seq=150328 receive_seq=150328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996306 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=60.4 mcu_temp: temp=44.5 sd_pos=2121627 sysload=0.03 cputime=362.397 memavail=1627112 print_time=7618.841 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.9 pwm=0.575
Stats 7609.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5548654 bytes_read=2607451 bytes_retransmit=9 bytes_invalid=0 send_seq=150354 receive_seq=150354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=55.1 pwm=0.014 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=2122046 sysload=0.03 cputime=362.455 memavail=1626860 print_time=7619.834 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.0 pwm=0.418
Stats 7610.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5549276 bytes_read=2607857 bytes_retransmit=9 bytes_invalid=0 send_seq=150375 receive_seq=150375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=2122252 sysload=0.03 cputime=362.524 memavail=1626612 print_time=7620.822 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 7611.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5550544 bytes_read=2608289 bytes_retransmit=9 bytes_invalid=0 send_seq=150404 receive_seq=150404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=2123565 sysload=0.03 cputime=362.600 memavail=1626608 print_time=7621.695 buffer_time=2.054 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 7612.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5552272 bytes_read=2608781 bytes_retransmit=9 bytes_invalid=0 send_seq=150439 receive_seq=150439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.1 pwm=0.257 rpi: temp=60.4 mcu_temp: temp=44.6 sd_pos=2125437 sysload=0.03 cputime=362.683 memavail=1626636 print_time=7622.745 buffer_time=2.103 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 7613.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=5553970 bytes_read=2609267 bytes_retransmit=9 bytes_invalid=0 send_seq=150476 receive_seq=150476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=2126969 sysload=0.03 cputime=362.765 memavail=1626120 print_time=7623.833 buffer_time=2.192 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 7614.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5554531 bytes_read=2609654 bytes_retransmit=9 bytes_invalid=0 send_seq=150493 receive_seq=150493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=58.9 mcu_temp: temp=44.9 sd_pos=2127151 sysload=0.03 cputime=362.830 memavail=1626376 print_time=7624.680 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 7615.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5555531 bytes_read=2610101 bytes_retransmit=9 bytes_invalid=0 send_seq=150519 receive_seq=150519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=54.9 pwm=0.327 rpi: temp=58.9 mcu_temp: temp=44.6 sd_pos=2128005 sysload=0.03 cputime=362.889 memavail=1626388 print_time=7625.749 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.3 pwm=0.329
Stats 7616.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5557401 bytes_read=2610597 bytes_retransmit=9 bytes_invalid=0 send_seq=150558 receive_seq=150558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.5 sd_pos=2130861 sysload=0.03 cputime=362.959 memavail=1625868 print_time=7626.713 buffer_time=2.069 print_stall=0 extruder: target=215 temp=215.2 pwm=0.430
Stats 7617.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5559834 bytes_read=2611134 bytes_retransmit=9 bytes_invalid=0 send_seq=150608 receive_seq=150608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.168 rpi: temp=60.4 mcu_temp: temp=44.1 sd_pos=2132749 sysload=0.03 cputime=363.044 memavail=1625900 print_time=7627.915 buffer_time=2.271 print_stall=0 extruder: target=215 temp=215.2 pwm=0.384
Stats 7618.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000053 bytes_write=5562650 bytes_read=2611721 bytes_retransmit=9 bytes_invalid=0 send_seq=150662 receive_seq=150662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=60.9 mcu_temp: temp=44.5 sd_pos=2133425 sysload=0.03 cputime=363.118 memavail=1625596 print_time=7629.056 buffer_time=2.411 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 7619.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5565603 bytes_read=2612327 bytes_retransmit=9 bytes_invalid=0 send_seq=150720 receive_seq=150720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.1 pwm=0.003 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=2135138 sysload=0.03 cputime=363.204 memavail=1625892 print_time=7629.984 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.2 pwm=0.377
Stats 7620.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5567176 bytes_read=2612789 bytes_retransmit=9 bytes_invalid=0 send_seq=150755 receive_seq=150755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.417 rpi: temp=59.4 mcu_temp: temp=44.5 sd_pos=2135439 sysload=0.03 cputime=363.269 memavail=1625884 print_time=7630.730 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.530
Stats 7621.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5569526 bytes_read=2613341 bytes_retransmit=9 bytes_invalid=0 send_seq=150802 receive_seq=150802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=54.9 pwm=0.429 rpi: temp=58.9 mcu_temp: temp=44.6 sd_pos=2135971 sysload=0.02 cputime=363.340 memavail=1625884 print_time=7631.959 buffer_time=2.313 print_stall=0 extruder: target=215 temp=215.2 pwm=0.402
Stats 7622.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5571129 bytes_read=2613827 bytes_retransmit=9 bytes_invalid=0 send_seq=150839 receive_seq=150839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=54.8 pwm=0.660 rpi: temp=58.9 mcu_temp: temp=44.7 sd_pos=2136239 sysload=0.02 cputime=363.402 memavail=1625632 print_time=7632.686 buffer_time=2.039 print_stall=0 extruder: target=215 temp=215.0 pwm=0.532
Stats 7623.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=5572558 bytes_read=2614290 bytes_retransmit=9 bytes_invalid=0 send_seq=150872 receive_seq=150872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=54.9 pwm=0.197 rpi: temp=59.4 mcu_temp: temp=44.7 sd_pos=2136535 sysload=0.02 cputime=363.465 memavail=1625872 print_time=7633.694 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 7624.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5573991 bytes_read=2614782 bytes_retransmit=9 bytes_invalid=0 send_seq=150904 receive_seq=150904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=54.9 pwm=0.393 rpi: temp=59.4 mcu_temp: temp=44.5 sd_pos=2136773 sysload=0.02 cputime=363.531 memavail=1625860 print_time=7634.860 buffer_time=2.212 print_stall=0 extruder: target=215 temp=214.9 pwm=0.571
Stats 7625.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5575154 bytes_read=2615233 bytes_retransmit=9 bytes_invalid=0 send_seq=150934 receive_seq=150934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=54.9 pwm=0.463 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=2136951 sysload=0.02 cputime=363.594 memavail=1626156 print_time=7635.880 buffer_time=2.231 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 7626.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5576365 bytes_read=2615666 bytes_retransmit=9 bytes_invalid=0 send_seq=150964 receive_seq=150964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.8 sd_pos=2137218 sysload=0.02 cputime=363.645 memavail=1625656 print_time=7637.011 buffer_time=2.362 print_stall=0 extruder: target=215 temp=214.8 pwm=0.608
Stats 7627.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5577231 bytes_read=2616091 bytes_retransmit=9 bytes_invalid=0 send_seq=150988 receive_seq=150988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.7 sd_pos=2137367 sysload=0.02 cputime=363.694 memavail=1625640 print_time=7637.825 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 7628.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=5578334 bytes_read=2616516 bytes_retransmit=9 bytes_invalid=0 send_seq=151015 receive_seq=151015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=2137580 sysload=0.02 cputime=363.756 memavail=1625900 print_time=7638.979 buffer_time=2.329 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 7629.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5579856 bytes_read=2616983 bytes_retransmit=9 bytes_invalid=0 send_seq=151050 receive_seq=151050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=58.9 mcu_temp: temp=44.7 sd_pos=2138356 sysload=0.02 cputime=363.830 memavail=1625676 print_time=7639.755 buffer_time=2.104 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 7630.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5583539 bytes_read=2617651 bytes_retransmit=9 bytes_invalid=0 send_seq=151121 receive_seq=151121 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=2140394 sysload=0.02 cputime=363.924 memavail=1625652 print_time=7640.930 buffer_time=2.280 print_stall=0 extruder: target=215 temp=214.8 pwm=0.548
Stats 7631.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5585068 bytes_read=2618122 bytes_retransmit=9 bytes_invalid=0 send_seq=151155 receive_seq=151155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=54.9 pwm=0.551 rpi: temp=59.4 mcu_temp: temp=44.6 sd_pos=2140731 sysload=0.02 cputime=363.991 memavail=1625908 print_time=7641.892 buffer_time=2.240 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 7632.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5586329 bytes_read=2618559 bytes_retransmit=9 bytes_invalid=0 send_seq=151185 receive_seq=151185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=54.9 pwm=0.358 rpi: temp=58.9 mcu_temp: temp=44.5 sd_pos=2140977 sysload=0.02 cputime=364.058 memavail=1626164 print_time=7642.848 buffer_time=2.196 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 7633.0: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000046 bytes_write=5587962 bytes_read=2619066 bytes_retransmit=9 bytes_invalid=0 send_seq=151223 receive_seq=151223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=45.0 sd_pos=2141376 sysload=0.02 cputime=364.123 memavail=1626128 print_time=7643.924 buffer_time=2.272 print_stall=0 extruder: target=215 temp=215.1 pwm=0.353
Stats 7634.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=5589287 bytes_read=2619542 bytes_retransmit=9 bytes_invalid=0 send_seq=151255 receive_seq=151255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=54.9 pwm=0.175 rpi: temp=58.9 mcu_temp: temp=44.5 sd_pos=2141560 sysload=0.02 cputime=364.186 memavail=1626172 print_time=7644.719 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 7635.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=5590793 bytes_read=2619999 bytes_retransmit=9 bytes_invalid=0 send_seq=151289 receive_seq=151289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996306 heater_bed: target=55 temp=55.0 pwm=0.045 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=2141838 sysload=0.02 cputime=364.251 memavail=1626180 print_time=7645.981 buffer_time=2.327 print_stall=0 extruder: target=215 temp=214.8 pwm=0.572
Stats 7636.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=5591694 bytes_read=2620436 bytes_retransmit=9 bytes_invalid=0 send_seq=151313 receive_seq=151313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.0 pwm=0.067 rpi: temp=58.9 mcu_temp: temp=44.5 sd_pos=2142023 sysload=0.02 cputime=364.305 memavail=1625916 print_time=7646.725 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.0 pwm=0.430
Stats 7637.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=5592996 bytes_read=2620902 bytes_retransmit=9 bytes_invalid=0 send_seq=151346 receive_seq=151346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=54.9 pwm=0.362 rpi: temp=59.9 mcu_temp: temp=44.3 sd_pos=2142238 sysload=0.02 cputime=364.364 memavail=1625948 print_time=7647.728 buffer_time=2.074 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 7638.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=5594164 bytes_read=2621329 bytes_retransmit=9 bytes_invalid=0 send_seq=151374 receive_seq=151374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.047 rpi: temp=58.9 mcu_temp: temp=44.5 sd_pos=2142484 sysload=0.02 cputime=364.428 memavail=1625680 print_time=7648.818 buffer_time=2.163 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 7639.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5595003 bytes_read=2621776 bytes_retransmit=9 bytes_invalid=0 send_seq=151397 receive_seq=151397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2142635 sysload=0.02 cputime=364.482 memavail=1625872 print_time=7649.721 buffer_time=2.066 print_stall=0 extruder: target=215 temp=214.8 pwm=0.501
Stats 7640.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5596568 bytes_read=2622252 bytes_retransmit=9 bytes_invalid=0 send_seq=151432 receive_seq=151432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996306 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.7 sd_pos=2142950 sysload=0.02 cputime=364.539 memavail=1626388 print_time=7651.249 buffer_time=2.593 print_stall=0 extruder: target=215 temp=215.1 pwm=0.354
Stats 7641.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5597914 bytes_read=2622704 bytes_retransmit=9 bytes_invalid=0 send_seq=151465 receive_seq=151465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.1 pwm=0.218 rpi: temp=58.4 mcu_temp: temp=44.4 sd_pos=2143324 sysload=0.02 cputime=364.598 memavail=1626360 print_time=7651.716 buffer_time=2.060 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 7642.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5600865 bytes_read=2623316 bytes_retransmit=9 bytes_invalid=0 send_seq=151524 receive_seq=151524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996304 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2144515 sysload=0.02 cputime=364.676 memavail=1626520 print_time=7652.872 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.7 pwm=0.580
Stats 7643.0: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000046 bytes_write=5602636 bytes_read=2623807 bytes_retransmit=9 bytes_invalid=0 send_seq=151562 receive_seq=151562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996305 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2146295 sysload=0.02 cputime=364.764 memavail=1626332 print_time=7653.650 buffer_time=1.992 print_stall=0 extruder: target=215 temp=214.8 pwm=0.497
Stats 7644.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5605578 bytes_read=2624399 bytes_retransmit=9 bytes_invalid=0 send_seq=151620 receive_seq=151620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=58.9 mcu_temp: temp=44.5 sd_pos=2148868 sysload=0.02 cputime=364.862 memavail=1626272 print_time=7654.923 buffer_time=2.263 print_stall=0 extruder: target=215 temp=214.9 pwm=0.413
Stats 7645.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5609402 bytes_read=2625076 bytes_retransmit=9 bytes_invalid=0 send_seq=151692 receive_seq=151692 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=58.4 mcu_temp: temp=44.4 sd_pos=2151237 sysload=0.02 cputime=364.964 memavail=1626092 print_time=7656.266 buffer_time=2.605 print_stall=0 extruder: target=215 temp=214.9 pwm=0.437
Stats 7646.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5610893 bytes_read=2625552 bytes_retransmit=9 bytes_invalid=0 send_seq=151727 receive_seq=151727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996308 heater_bed: target=55 temp=55.0 pwm=0.570 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=2151946 sysload=0.01 cputime=365.036 memavail=1626152 print_time=7656.876 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 7647.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5612910 bytes_read=2626049 bytes_retransmit=9 bytes_invalid=0 send_seq=151769 receive_seq=151769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.271 rpi: temp=59.9 mcu_temp: temp=44.5 sd_pos=2153047 sysload=0.01 cputime=365.115 memavail=1626264 print_time=7657.822 buffer_time=2.160 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 7648.0: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5614806 bytes_read=2626581 bytes_retransmit=9 bytes_invalid=0 send_seq=151812 receive_seq=151812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=2154165 sysload=0.01 cputime=365.199 memavail=1626192 print_time=7658.919 buffer_time=2.257 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 7649.0: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000059 bytes_write=5615866 bytes_read=2627033 bytes_retransmit=9 bytes_invalid=0 send_seq=151839 receive_seq=151839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.317 rpi: temp=59.9 mcu_temp: temp=44.4 sd_pos=2154638 sysload=0.01 cputime=365.268 memavail=1626188 print_time=7659.901 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.2 pwm=0.363
Stats 7650.0: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000059 bytes_write=5617787 bytes_read=2627535 bytes_retransmit=9 bytes_invalid=0 send_seq=151882 receive_seq=151882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=2156306 sysload=0.01 cputime=365.356 memavail=1626144 print_time=7660.672 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.2 pwm=0.357
Stats 7651.0: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000059 bytes_write=5620115 bytes_read=2628082 bytes_retransmit=9 bytes_invalid=0 send_seq=151929 receive_seq=151928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=58.9 mcu_temp: temp=44.6 sd_pos=2158634 sysload=0.01 cputime=365.453 memavail=1625908 print_time=7661.724 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.2 pwm=0.431
Stats 7652.0: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000059 bytes_write=5622320 bytes_read=2628603 bytes_retransmit=9 bytes_invalid=0 send_seq=151972 receive_seq=151972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.1 pwm=0.016 rpi: temp=58.4 mcu_temp: temp=44.7 sd_pos=2160472 sysload=0.01 cputime=365.537 memavail=1625876 print_time=7662.885 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 7653.0: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000059 bytes_write=5623695 bytes_read=2629055 bytes_retransmit=9 bytes_invalid=0 send_seq=152005 receive_seq=152005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.1 pwm=0.148 rpi: temp=59.4 mcu_temp: temp=44.7 sd_pos=2161619 sysload=0.01 cputime=365.606 memavail=1625708 print_time=7663.936 buffer_time=2.271 print_stall=0 extruder: target=215 temp=215.2 pwm=0.388
Stats 7654.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=5624759 bytes_read=2629526 bytes_retransmit=9 bytes_invalid=0 send_seq=152034 receive_seq=152030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.399 rpi: temp=59.9 mcu_temp: temp=44.7 sd_pos=2162278 sysload=0.01 cputime=365.671 memavail=1625924 print_time=7664.898 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.1 pwm=0.516
Stats 7655.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=5627184 bytes_read=2630078 bytes_retransmit=9 bytes_invalid=0 send_seq=152083 receive_seq=152083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=2163916 sysload=0.01 cputime=365.755 memavail=1625768 print_time=7665.922 buffer_time=2.250 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 7656.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=5628939 bytes_read=2630565 bytes_retransmit=9 bytes_invalid=0 send_seq=152123 receive_seq=152123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=58.9 mcu_temp: temp=44.4 sd_pos=2165462 sysload=0.01 cputime=365.838 memavail=1626284 print_time=7666.720 buffer_time=2.048 print_stall=0 extruder: target=215 temp=215.0 pwm=0.587
Stats 7657.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000055 bytes_write=5630393 bytes_read=2631056 bytes_retransmit=9 bytes_invalid=0 send_seq=152155 receive_seq=152155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.2 pwm=0.010 rpi: temp=58.4 mcu_temp: temp=44.4 sd_pos=2166842 sysload=0.01 cputime=365.914 memavail=1626300 print_time=7667.711 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.1 pwm=0.482
Stats 7658.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5631120 bytes_read=2631468 bytes_retransmit=9 bytes_invalid=0 send_seq=152177 receive_seq=152177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=2167130 sysload=0.01 cputime=365.975 memavail=1626732 print_time=7668.714 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.1 pwm=0.482
Stats 7659.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5633398 bytes_read=2631980 bytes_retransmit=9 bytes_invalid=0 send_seq=152222 receive_seq=152222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.092 rpi: temp=58.9 mcu_temp: temp=44.3 sd_pos=2169520 sysload=0.01 cputime=366.064 memavail=1626612 print_time=7669.806 buffer_time=2.132 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 7660.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5635818 bytes_read=2632556 bytes_retransmit=9 bytes_invalid=0 send_seq=152271 receive_seq=152271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.074 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=2172027 sysload=0.01 cputime=366.166 memavail=1626264 print_time=7670.910 buffer_time=2.235 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 7661.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5637673 bytes_read=2633043 bytes_retransmit=9 bytes_invalid=0 send_seq=152311 receive_seq=152311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=2174436 sysload=0.25 cputime=366.258 memavail=1626284 print_time=7671.696 buffer_time=2.015 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 7662.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=5639936 bytes_read=2633570 bytes_retransmit=9 bytes_invalid=0 send_seq=152356 receive_seq=152356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=54.9 pwm=0.496 rpi: temp=59.9 mcu_temp: temp=44.6 sd_pos=2176277 sysload=0.25 cputime=366.345 memavail=1626492 print_time=7672.709 buffer_time=2.027 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 7663.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5640943 bytes_read=2634021 bytes_retransmit=9 bytes_invalid=0 send_seq=152380 receive_seq=152380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=2176858 sysload=0.25 cputime=366.411 memavail=1626044 print_time=7674.035 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.0 pwm=0.408
Stats 7664.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5642850 bytes_read=2634508 bytes_retransmit=9 bytes_invalid=0 send_seq=152420 receive_seq=152420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=59.4 mcu_temp: temp=44.4 sd_pos=2179125 sysload=0.25 cputime=366.501 memavail=1626028 print_time=7674.824 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 7665.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5645690 bytes_read=2635090 bytes_retransmit=9 bytes_invalid=0 send_seq=152476 receive_seq=152476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=58.4 mcu_temp: temp=44.1 sd_pos=2181066 sysload=0.25 cputime=366.594 memavail=1626296 print_time=7675.935 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 7666.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5647120 bytes_read=2635571 bytes_retransmit=9 bytes_invalid=0 send_seq=152509 receive_seq=152509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=2183344 sysload=0.31 cputime=366.684 memavail=1626024 print_time=7676.710 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 7667.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5650050 bytes_read=2636143 bytes_retransmit=9 bytes_invalid=0 send_seq=152566 receive_seq=152566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=54.9 pwm=0.441 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=2185933 sysload=0.31 cputime=366.762 memavail=1626296 print_time=7677.814 buffer_time=2.126 print_stall=0 extruder: target=215 temp=215.0 pwm=0.498
Stats 7668.0: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=5651834 bytes_read=2636646 bytes_retransmit=9 bytes_invalid=0 send_seq=152603 receive_seq=152603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.3 sd_pos=2188082 sysload=0.31 cputime=366.835 memavail=1625992 print_time=7678.780 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 7669.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5654198 bytes_read=2637207 bytes_retransmit=9 bytes_invalid=0 send_seq=152652 receive_seq=152652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=2189441 sysload=0.31 cputime=366.916 memavail=1625536 print_time=7679.744 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 7670.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5656096 bytes_read=2637684 bytes_retransmit=9 bytes_invalid=0 send_seq=152691 receive_seq=152690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=2191510 sysload=0.31 cputime=367.008 memavail=1625284 print_time=7680.775 buffer_time=2.079 print_stall=0 extruder: target=215 temp=214.8 pwm=0.602
Stats 7671.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5657890 bytes_read=2638186 bytes_retransmit=9 bytes_invalid=0 send_seq=152730 receive_seq=152730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2192941 sysload=0.29 cputime=367.074 memavail=1625540 print_time=7681.742 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 7672.0: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=5658634 bytes_read=2638602 bytes_retransmit=9 bytes_invalid=0 send_seq=152750 receive_seq=152750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.113 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2193262 sysload=0.29 cputime=367.128 memavail=1625784 print_time=7682.705 buffer_time=2.008 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 7673.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000063 bytes_write=5659567 bytes_read=2639019 bytes_retransmit=9 bytes_invalid=0 send_seq=152773 receive_seq=152773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.342 rpi: temp=59.4 mcu_temp: temp=44.5 sd_pos=2193856 sysload=0.29 cputime=367.199 memavail=1626060 print_time=7684.014 buffer_time=2.316 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 7674.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000063 bytes_write=5660809 bytes_read=2639456 bytes_retransmit=9 bytes_invalid=0 send_seq=152800 receive_seq=152800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=2195180 sysload=0.29 cputime=367.272 memavail=1626372 print_time=7684.700 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 7675.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000063 bytes_write=5662976 bytes_read=2639987 bytes_retransmit=9 bytes_invalid=0 send_seq=152843 receive_seq=152843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.249 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=2197961 sysload=0.29 cputime=367.379 memavail=1626108 print_time=7685.891 buffer_time=2.191 print_stall=0 extruder: target=215 temp=215.1 pwm=0.396
Stats 7676.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000063 bytes_write=5664439 bytes_read=2640424 bytes_retransmit=9 bytes_invalid=0 send_seq=152873 receive_seq=152873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=2199142 sysload=0.26 cputime=367.443 memavail=1626124 print_time=7686.846 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.0 pwm=0.416
Stats 7677.0: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000063 bytes_write=5665363 bytes_read=2640826 bytes_retransmit=9 bytes_invalid=0 send_seq=152894 receive_seq=152893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.332 rpi: temp=58.4 mcu_temp: temp=44.4 sd_pos=2199781 sysload=0.26 cputime=367.506 memavail=1626120 print_time=7688.196 buffer_time=2.495 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 7678.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5666574 bytes_read=2641312 bytes_retransmit=9 bytes_invalid=0 send_seq=152924 receive_seq=152924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2201227 sysload=0.26 cputime=367.585 memavail=1626376 print_time=7688.729 buffer_time=2.027 print_stall=0 extruder: target=215 temp=215.1 pwm=0.487
Stats 7679.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5668458 bytes_read=2641799 bytes_retransmit=9 bytes_invalid=0 send_seq=152964 receive_seq=152964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.0 pwm=0.391 rpi: temp=58.9 mcu_temp: temp=44.7 sd_pos=2203774 sysload=0.26 cputime=367.677 memavail=1626120 print_time=7689.862 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 7680.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5671271 bytes_read=2642376 bytes_retransmit=9 bytes_invalid=0 send_seq=153019 receive_seq=153019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=54.9 pwm=0.542 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2205436 sysload=0.26 cputime=367.772 memavail=1625880 print_time=7690.979 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.1 pwm=0.413
Stats 7681.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5672541 bytes_read=2642842 bytes_retransmit=9 bytes_invalid=0 send_seq=153049 receive_seq=153049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.0 pwm=0.123 rpi: temp=58.4 mcu_temp: temp=44.3 sd_pos=2205732 sysload=0.24 cputime=367.837 memavail=1625880 print_time=7691.744 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 7682.0: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5674185 bytes_read=2643309 bytes_retransmit=9 bytes_invalid=0 send_seq=153085 receive_seq=153085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2206147 sysload=0.24 cputime=367.894 memavail=1625944 print_time=7692.936 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 7683.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=5675200 bytes_read=2643782 bytes_retransmit=9 bytes_invalid=0 send_seq=153111 receive_seq=153111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=2206295 sysload=0.24 cputime=367.947 memavail=1625692 print_time=7693.779 buffer_time=2.068 print_stall=0 extruder: target=215 temp=215.1 pwm=0.451
Stats 7684.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=5676200 bytes_read=2644203 bytes_retransmit=9 bytes_invalid=0 send_seq=153135 receive_seq=153135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2206501 sysload=0.24 cputime=368.006 memavail=1625956 print_time=7694.764 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 7685.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=5677239 bytes_read=2644615 bytes_retransmit=9 bytes_invalid=0 send_seq=153160 receive_seq=153160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2206679 sysload=0.24 cputime=368.068 memavail=1625952 print_time=7695.835 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 7686.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=5678220 bytes_read=2645048 bytes_retransmit=9 bytes_invalid=0 send_seq=153185 receive_seq=153185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=2206858 sysload=0.22 cputime=368.122 memavail=1625704 print_time=7696.952 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.0 pwm=0.423
Stats 7687.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=5679000 bytes_read=2645448 bytes_retransmit=9 bytes_invalid=0 send_seq=153207 receive_seq=153207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=2207004 sysload=0.22 cputime=368.174 memavail=1625700 print_time=7697.715 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 7688.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000043 bytes_write=5680105 bytes_read=2645865 bytes_retransmit=9 bytes_invalid=0 send_seq=153235 receive_seq=153235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=2207272 sysload=0.22 cputime=368.236 memavail=1625652 print_time=7698.891 buffer_time=2.176 print_stall=0 extruder: target=215 temp=215.0 pwm=0.437
Stats 7689.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5682294 bytes_read=2646412 bytes_retransmit=9 bytes_invalid=0 send_seq=153280 receive_seq=153280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2207722 sysload=0.22 cputime=368.304 memavail=1625648 print_time=7699.871 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.9 pwm=0.492
Stats 7690.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5683130 bytes_read=2646833 bytes_retransmit=9 bytes_invalid=0 send_seq=153304 receive_seq=153304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=54.9 pwm=0.625 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2207869 sysload=0.22 cputime=368.365 memavail=1625836 print_time=7700.887 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 7691.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5684395 bytes_read=2647270 bytes_retransmit=9 bytes_invalid=0 send_seq=153334 receive_seq=153334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2208549 sysload=0.20 cputime=368.430 memavail=1625800 print_time=7702.323 buffer_time=2.603 print_stall=0 extruder: target=215 temp=215.0 pwm=0.411
Stats 7692.0: gcodein=0 mcu: mcu_awake=0.014 mcu_task_avg=0.000022 mcu_task_stddev=0.000049 bytes_write=5685582 bytes_read=2647727 bytes_retransmit=9 bytes_invalid=0 send_seq=153362 receive_seq=153362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2209194 sysload=0.20 cputime=368.492 memavail=1625592 print_time=7702.739 buffer_time=2.016 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 7693.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5688565 bytes_read=2648323 bytes_retransmit=9 bytes_invalid=0 send_seq=153418 receive_seq=153418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=54.9 pwm=0.443 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=2209964 sysload=0.20 cputime=368.565 memavail=1625836 print_time=7704.055 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 7694.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5691092 bytes_read=2648865 bytes_retransmit=9 bytes_invalid=0 send_seq=153469 receive_seq=153469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2210665 sysload=0.20 cputime=368.633 memavail=1625664 print_time=7704.838 buffer_time=2.114 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 7695.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5692954 bytes_read=2649372 bytes_retransmit=9 bytes_invalid=0 send_seq=153507 receive_seq=153507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=54.9 pwm=0.361 rpi: temp=57.9 mcu_temp: temp=44.4 sd_pos=2211125 sysload=0.20 cputime=368.701 memavail=1625648 print_time=7706.102 buffer_time=2.377 print_stall=0 extruder: target=215 temp=215.1 pwm=0.488
Stats 7696.0: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5693898 bytes_read=2649788 bytes_retransmit=9 bytes_invalid=0 send_seq=153531 receive_seq=153530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2211278 sysload=0.19 cputime=368.750 memavail=1625640 print_time=7707.085 buffer_time=2.359 print_stall=0 extruder: target=215 temp=215.0 pwm=0.525
Stats 7697.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5694737 bytes_read=2650190 bytes_retransmit=9 bytes_invalid=0 send_seq=153553 receive_seq=153553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2211432 sysload=0.19 cputime=368.805 memavail=1625624 print_time=7708.081 buffer_time=2.352 print_stall=0 extruder: target=215 temp=215.2 pwm=0.396
Stats 7698.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=5695630 bytes_read=2650632 bytes_retransmit=9 bytes_invalid=0 send_seq=153575 receive_seq=153575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=54.9 pwm=0.525 rpi: temp=59.9 mcu_temp: temp=44.1 sd_pos=2211586 sysload=0.19 cputime=368.866 memavail=1625640 print_time=7708.956 buffer_time=2.227 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 7699.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=5696699 bytes_read=2651068 bytes_retransmit=9 bytes_invalid=0 send_seq=153602 receive_seq=153602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996309 heater_bed: target=55 temp=55.1 pwm=0.084 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=2212192 sysload=0.19 cputime=368.931 memavail=1625652 print_time=7709.855 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.2 pwm=0.409
Stats 7700.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=5698221 bytes_read=2651520 bytes_retransmit=9 bytes_invalid=0 send_seq=153635 receive_seq=153635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996307 heater_bed: target=55 temp=55.0 pwm=0.303 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2212442 sysload=0.19 cputime=368.978 memavail=1625652 print_time=7710.933 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 7701.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=5699481 bytes_read=2651987 bytes_retransmit=9 bytes_invalid=0 send_seq=153665 receive_seq=153665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=2212655 sysload=0.17 cputime=369.034 memavail=1625672 print_time=7711.861 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.2 pwm=0.393
Stats 7702.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=5701015 bytes_read=2652458 bytes_retransmit=9 bytes_invalid=0 send_seq=153699 receive_seq=153699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2212991 sysload=0.17 cputime=369.099 memavail=1625652 print_time=7712.999 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.1 pwm=0.478
Stats 7703.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000056 bytes_write=5702610 bytes_read=2652920 bytes_retransmit=9 bytes_invalid=0 send_seq=153734 receive_seq=153734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2213243 sysload=0.17 cputime=369.160 memavail=1625648 print_time=7713.758 buffer_time=2.023 print_stall=0 extruder: target=215 temp=214.9 pwm=0.588
Stats 7704.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5704847 bytes_read=2653482 bytes_retransmit=9 bytes_invalid=0 send_seq=153780 receive_seq=153780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=54.9 pwm=0.493 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2213767 sysload=0.17 cputime=369.229 memavail=1625400 print_time=7714.732 buffer_time=1.994 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 7705.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5709108 bytes_read=2654183 bytes_retransmit=9 bytes_invalid=0 send_seq=153860 receive_seq=153860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.130 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2215734 sysload=0.17 cputime=369.323 memavail=1625392 print_time=7716.099 buffer_time=2.361 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 7706.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5711925 bytes_read=2654735 bytes_retransmit=9 bytes_invalid=0 send_seq=153913 receive_seq=153913 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=58.4 mcu_temp: temp=44.1 sd_pos=2217588 sysload=0.16 cputime=369.406 memavail=1625876 print_time=7717.115 buffer_time=2.376 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7707.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5715156 bytes_read=2655352 bytes_retransmit=9 bytes_invalid=0 send_seq=153973 receive_seq=153973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996312 heater_bed: target=55 temp=55.0 pwm=0.409 rpi: temp=58.4 mcu_temp: temp=44.5 sd_pos=2219229 sysload=0.16 cputime=369.496 memavail=1625588 print_time=7718.380 buffer_time=2.638 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7708.1: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5716549 bytes_read=2655803 bytes_retransmit=9 bytes_invalid=0 send_seq=154004 receive_seq=154003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=2220505 sysload=0.16 cputime=369.574 memavail=1625892 print_time=7718.933 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7709.1: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000047 bytes_write=5718712 bytes_read=2656331 bytes_retransmit=9 bytes_invalid=0 send_seq=154048 receive_seq=154048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=54.9 pwm=0.420 rpi: temp=58.9 mcu_temp: temp=44.4 sd_pos=2222773 sysload=0.16 cputime=369.665 memavail=1625588 print_time=7719.917 buffer_time=2.172 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 7710.1: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000047 bytes_write=5721556 bytes_read=2656928 bytes_retransmit=9 bytes_invalid=0 send_seq=154104 receive_seq=154104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996313 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=57.9 mcu_temp: temp=44.3 sd_pos=2224886 sysload=0.16 cputime=369.758 memavail=1625824 print_time=7720.943 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.9 pwm=0.420
Stats 7711.1: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000047 bytes_write=5723857 bytes_read=2657464 bytes_retransmit=9 bytes_invalid=0 send_seq=154151 receive_seq=154151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=2225908 sysload=0.14 cputime=369.834 memavail=1625828 print_time=7721.831 buffer_time=2.085 print_stall=0 extruder: target=215 temp=214.8 pwm=0.487
Stats 7712.1: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000047 bytes_write=5725838 bytes_read=2657946 bytes_retransmit=9 bytes_invalid=0 send_seq=154190 receive_seq=154190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996310 heater_bed: target=55 temp=55.0 pwm=0.126 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=2226978 sysload=0.14 cputime=369.911 memavail=1625884 print_time=7722.791 buffer_time=2.043 print_stall=0 extruder: target=215 temp=214.7 pwm=0.554
Stats 7713.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=5727822 bytes_read=2658479 bytes_retransmit=9 bytes_invalid=0 send_seq=154230 receive_seq=154230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996311 heater_bed: target=55 temp=55.0 pwm=0.364 rpi: temp=59.4 mcu_temp: temp=44.3 sd_pos=2228159 sysload=0.14 cputime=369.978 memavail=1625884 print_time=7723.883 buffer_time=2.135 print_stall=0 extruder: target=215 temp=214.8 pwm=0.529
Stats 7714.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=5728761 bytes_read=2658900 bytes_retransmit=9 bytes_invalid=0 send_seq=154254 receive_seq=154254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996315 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=58.9 mcu_temp: temp=44.3 sd_pos=2228660 sysload=0.14 cputime=370.034 memavail=1625888 print_time=7724.819 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.0 pwm=0.405
Stats 7715.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=5731287 bytes_read=2659442 bytes_retransmit=9 bytes_invalid=0 send_seq=154305 receive_seq=154305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2230910 sysload=0.14 cputime=370.125 memavail=1626384 print_time=7725.906 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.0 pwm=0.411
Stats 7716.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=5733746 bytes_read=2660004 bytes_retransmit=9 bytes_invalid=0 send_seq=154354 receive_seq=154354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.495 rpi: temp=59.4 mcu_temp: temp=44.1 sd_pos=2233049 sysload=0.21 cputime=370.206 memavail=1626976 print_time=7726.952 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.372
Stats 7717.1: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=5735595 bytes_read=2660495 bytes_retransmit=9 bytes_invalid=0 send_seq=154392 receive_seq=154392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=54.9 pwm=0.545 rpi: temp=59.4 mcu_temp: temp=44.2 sd_pos=2234527 sysload=0.21 cputime=370.273 memavail=1626756 print_time=7727.826 buffer_time=2.073 print_stall=0 extruder: target=215 temp=215.0 pwm=0.443
Stats 7718.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5736936 bytes_read=2660953 bytes_retransmit=9 bytes_invalid=0 send_seq=154423 receive_seq=154423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.038 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2235729 sysload=0.21 cputime=370.350 memavail=1627072 print_time=7728.838 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.1 pwm=0.383
Stats 7719.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5737973 bytes_read=2661395 bytes_retransmit=9 bytes_invalid=0 send_seq=154448 receive_seq=154448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=2236451 sysload=0.21 cputime=370.408 memavail=1626820 print_time=7729.815 buffer_time=2.060 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 7720.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5740445 bytes_read=2661946 bytes_retransmit=9 bytes_invalid=0 send_seq=154498 receive_seq=154498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=44.6 sd_pos=2238145 sysload=0.21 cputime=370.483 memavail=1626820 print_time=7730.831 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 7721.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5742322 bytes_read=2662418 bytes_retransmit=9 bytes_invalid=0 send_seq=154535 receive_seq=154535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.0 pwm=0.349 rpi: temp=58.4 mcu_temp: temp=44.1 sd_pos=2239953 sysload=0.28 cputime=370.562 memavail=1626796 print_time=7731.865 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.8 pwm=0.626
Stats 7722.1: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=5743653 bytes_read=2662875 bytes_retransmit=9 bytes_invalid=0 send_seq=154563 receive_seq=154563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.300 rpi: temp=58.9 mcu_temp: temp=44.4 sd_pos=2241099 sysload=0.28 cputime=370.640 memavail=1626580 print_time=7732.843 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.0 pwm=0.438
Stats 7723.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5744714 bytes_read=2663321 bytes_retransmit=9 bytes_invalid=0 send_seq=154589 receive_seq=154589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.144 rpi: temp=58.4 mcu_temp: temp=44.3 sd_pos=2241804 sysload=0.28 cputime=370.699 memavail=1626556 print_time=7733.827 buffer_time=2.066 print_stall=0 extruder: target=215 temp=214.9 pwm=0.501
Stats 7724.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5746889 bytes_read=2663818 bytes_retransmit=9 bytes_invalid=0 send_seq=154631 receive_seq=154631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=44.2 sd_pos=2244231 sysload=0.28 cputime=370.781 memavail=1626264 print_time=7734.892 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.0 pwm=0.501
Stats 7725.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5749407 bytes_read=2664385 bytes_retransmit=9 bytes_invalid=0 send_seq=154681 receive_seq=154681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=54.9 pwm=0.403 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=2246983 sysload=0.28 cputime=370.884 memavail=1626332 print_time=7735.950 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.8 pwm=0.501
Stats 7726.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5751767 bytes_read=2664916 bytes_retransmit=9 bytes_invalid=0 send_seq=154727 receive_seq=154727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=54.9 pwm=0.249 rpi: temp=57.5 mcu_temp: temp=44.2 sd_pos=2249782 sysload=0.33 cputime=370.969 memavail=1626080 print_time=7737.025 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.0 pwm=0.423
Stats 7727.1: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=5753200 bytes_read=2665353 bytes_retransmit=9 bytes_invalid=0 send_seq=154757 receive_seq=154757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.140 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2250580 sysload=0.33 cputime=371.035 memavail=1626080 print_time=7737.831 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 7728.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=5754101 bytes_read=2665809 bytes_retransmit=9 bytes_invalid=0 send_seq=154779 receive_seq=154779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.232 rpi: temp=58.4 mcu_temp: temp=44.1 sd_pos=2251157 sysload=0.33 cputime=371.100 memavail=1626304 print_time=7738.781 buffer_time=2.012 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 7729.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=5756686 bytes_read=2666346 bytes_retransmit=9 bytes_invalid=0 send_seq=154829 receive_seq=154829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=2253818 sysload=0.33 cputime=371.202 memavail=1626280 print_time=7739.891 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 7730.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=5759058 bytes_read=2666863 bytes_retransmit=9 bytes_invalid=0 send_seq=154875 receive_seq=154875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.403 rpi: temp=58.4 mcu_temp: temp=44.3 sd_pos=2256164 sysload=0.33 cputime=371.300 memavail=1626532 print_time=7740.931 buffer_time=2.161 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 7731.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=5761262 bytes_read=2667457 bytes_retransmit=9 bytes_invalid=0 send_seq=154924 receive_seq=154924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.066 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=2259078 sysload=0.39 cputime=371.380 memavail=1626324 print_time=7742.043 buffer_time=2.272 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 7732.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=5763907 bytes_read=2667999 bytes_retransmit=9 bytes_invalid=0 send_seq=154975 receive_seq=154975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.9 sd_pos=2261323 sysload=0.39 cputime=371.475 memavail=1626500 print_time=7743.065 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.9 pwm=0.480
Stats 7733.1: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=5766609 bytes_read=2668536 bytes_retransmit=9 bytes_invalid=0 send_seq=155026 receive_seq=155025 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.084 rpi: temp=59.4 mcu_temp: temp=44.0 sd_pos=2263402 sysload=0.39 cputime=371.576 memavail=1626628 print_time=7744.229 buffer_time=2.454 print_stall=0 extruder: target=215 temp=215.0 pwm=0.390
Stats 7734.1: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=5767882 bytes_read=2669028 bytes_retransmit=9 bytes_invalid=0 send_seq=155054 receive_seq=155054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.339 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=2264645 sysload=0.39 cputime=371.655 memavail=1626620 print_time=7744.989 buffer_time=2.212 print_stall=0 extruder: target=215 temp=215.1 pwm=0.403
Stats 7735.1: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=5769502 bytes_read=2669490 bytes_retransmit=9 bytes_invalid=0 send_seq=155089 receive_seq=155089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.078 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2266247 sysload=0.39 cputime=371.739 memavail=1626604 print_time=7745.935 buffer_time=2.156 print_stall=0 extruder: target=215 temp=214.9 pwm=0.473
Stats 7736.1: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=5770756 bytes_read=2669932 bytes_retransmit=9 bytes_invalid=0 send_seq=155117 receive_seq=155117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=10 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2267354 sysload=0.44 cputime=371.803 memavail=1625864 print_time=7746.808 buffer_time=2.029 print_stall=0 extruder: target=215 temp=214.8 pwm=0.560
Stats 7737.1: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000053 bytes_write=5771473 bytes_read=2670358 bytes_retransmit=9 bytes_invalid=0 send_seq=155139 receive_seq=155139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.151 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=2267702 sysload=0.44 cputime=371.863 memavail=1625856 print_time=7747.886 buffer_time=2.104 print_stall=0 extruder: target=215 temp=214.8 pwm=0.568
Stats 7738.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5772689 bytes_read=2670810 bytes_retransmit=9 bytes_invalid=0 send_seq=155169 receive_seq=155169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=2268865 sysload=0.44 cputime=371.938 memavail=1625872 print_time=7748.907 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.9 pwm=0.442
Stats 7739.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5774542 bytes_read=2671302 bytes_retransmit=9 bytes_invalid=0 send_seq=155207 receive_seq=155207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.240 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=2270858 sysload=0.44 cputime=372.027 memavail=1626080 print_time=7749.971 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.528
Stats 7740.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5775945 bytes_read=2671768 bytes_retransmit=9 bytes_invalid=0 send_seq=155237 receive_seq=155237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.1 pwm=0.080 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2271834 sysload=0.44 cputime=372.088 memavail=1626184 print_time=7751.007 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.414
Stats 7741.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5776653 bytes_read=2672150 bytes_retransmit=9 bytes_invalid=0 send_seq=155256 receive_seq=155256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.1 pwm=0.296 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2272168 sysload=0.48 cputime=372.150 memavail=1625832 print_time=7752.086 buffer_time=2.299 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 7742.1: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=5778425 bytes_read=2672648 bytes_retransmit=9 bytes_invalid=0 send_seq=155294 receive_seq=155293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=2274040 sysload=0.48 cputime=372.241 memavail=1626424 print_time=7752.976 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.384
Stats 7743.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=5779885 bytes_read=2673139 bytes_retransmit=9 bytes_invalid=0 send_seq=155325 receive_seq=155325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.079 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=2275896 sysload=0.48 cputime=372.326 memavail=1626196 print_time=7753.789 buffer_time=1.998 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 7744.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=5782168 bytes_read=2673651 bytes_retransmit=9 bytes_invalid=0 send_seq=155370 receive_seq=155370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.008 rpi: temp=58.9 mcu_temp: temp=44.2 sd_pos=2277521 sysload=0.48 cputime=372.414 memavail=1625908 print_time=7754.871 buffer_time=2.077 print_stall=0 extruder: target=215 temp=215.2 pwm=0.330
Stats 7745.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=5784771 bytes_read=2674202 bytes_retransmit=9 bytes_invalid=0 send_seq=155420 receive_seq=155420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2278187 sysload=0.48 cputime=372.465 memavail=1625968 print_time=7756.158 buffer_time=2.363 print_stall=0 extruder: target=215 temp=214.9 pwm=0.636
Stats 7746.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=5788145 bytes_read=2674826 bytes_retransmit=9 bytes_invalid=0 send_seq=155484 receive_seq=155484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2280056 sysload=0.68 cputime=372.551 memavail=1625940 print_time=7757.246 buffer_time=2.441 print_stall=0 extruder: target=215 temp=215.2 pwm=0.429
Stats 7747.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=5790592 bytes_read=2675353 bytes_retransmit=9 bytes_invalid=0 send_seq=155534 receive_seq=155534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2281040 sysload=0.68 cputime=372.623 memavail=1625628 print_time=7757.981 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.537
Stats 7748.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=5792205 bytes_read=2675835 bytes_retransmit=9 bytes_invalid=0 send_seq=155569 receive_seq=155569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.165 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2281316 sysload=0.68 cputime=372.683 memavail=1625820 print_time=7758.973 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.2 pwm=0.397
Stats 7749.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=5793857 bytes_read=2676321 bytes_retransmit=9 bytes_invalid=0 send_seq=155604 receive_seq=155604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.208 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2281682 sysload=0.68 cputime=372.741 memavail=1625568 print_time=7760.032 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.2 pwm=0.465
Stats 7750.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=5795404 bytes_read=2676773 bytes_retransmit=9 bytes_invalid=0 send_seq=155637 receive_seq=155637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2282019 sysload=0.68 cputime=372.803 memavail=1625576 print_time=7760.972 buffer_time=2.165 print_stall=0 extruder: target=215 temp=215.1 pwm=0.465
Stats 7751.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=5796892 bytes_read=2677250 bytes_retransmit=9 bytes_invalid=0 send_seq=155669 receive_seq=155669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2282356 sysload=0.71 cputime=372.872 memavail=1625804 print_time=7762.046 buffer_time=2.239 print_stall=0 extruder: target=215 temp=214.9 pwm=0.581
Stats 7752.1: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=5798147 bytes_read=2677701 bytes_retransmit=9 bytes_invalid=0 send_seq=155699 receive_seq=155699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=44.2 sd_pos=2282603 sysload=0.71 cputime=372.934 memavail=1625840 print_time=7763.029 buffer_time=2.220 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 7753.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5799428 bytes_read=2678158 bytes_retransmit=9 bytes_invalid=0 send_seq=155730 receive_seq=155730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.177 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2282844 sysload=0.71 cputime=372.998 memavail=1626148 print_time=7763.955 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 7754.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5800683 bytes_read=2678620 bytes_retransmit=9 bytes_invalid=0 send_seq=155759 receive_seq=155759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2283122 sysload=0.71 cputime=373.064 memavail=1626424 print_time=7764.948 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 7755.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5801853 bytes_read=2679061 bytes_retransmit=9 bytes_invalid=0 send_seq=155787 receive_seq=155787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.382 rpi: temp=59.9 mcu_temp: temp=43.8 sd_pos=2283367 sysload=0.71 cputime=373.128 memavail=1626396 print_time=7766.137 buffer_time=2.325 print_stall=0 extruder: target=215 temp=214.8 pwm=0.601
Stats 7756.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5803577 bytes_read=2679543 bytes_retransmit=9 bytes_invalid=0 send_seq=155826 receive_seq=155826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.093 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2283872 sysload=0.73 cputime=373.186 memavail=1626920 print_time=7767.204 buffer_time=2.392 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 7757.1: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000044 bytes_write=5806817 bytes_read=2680175 bytes_retransmit=9 bytes_invalid=0 send_seq=155889 receive_seq=155889 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.020 rpi: temp=59.4 mcu_temp: temp=43.4 sd_pos=2285799 sysload=0.73 cputime=373.285 memavail=1626884 print_time=7768.234 buffer_time=2.420 print_stall=0 extruder: target=215 temp=214.9 pwm=0.466
Stats 7758.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5808211 bytes_read=2680651 bytes_retransmit=9 bytes_invalid=0 send_seq=155921 receive_seq=155921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.043 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2286072 sysload=0.73 cputime=373.353 memavail=1626872 print_time=7769.109 buffer_time=2.295 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 7759.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5809441 bytes_read=2681078 bytes_retransmit=9 bytes_invalid=0 send_seq=155949 receive_seq=155949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=54.9 pwm=0.553 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2286367 sysload=0.73 cputime=373.416 memavail=1626640 print_time=7769.893 buffer_time=2.078 print_stall=0 extruder: target=215 temp=215.1 pwm=0.410
Stats 7760.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5811278 bytes_read=2681580 bytes_retransmit=9 bytes_invalid=0 send_seq=155986 receive_seq=155986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.475 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2286816 sysload=0.73 cputime=373.484 memavail=1626640 print_time=7771.001 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 7761.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5812506 bytes_read=2682026 bytes_retransmit=9 bytes_invalid=0 send_seq=156015 receive_seq=156015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.187 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2287081 sysload=0.76 cputime=373.551 memavail=1626392 print_time=7772.089 buffer_time=2.273 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 7762.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5813470 bytes_read=2682433 bytes_retransmit=9 bytes_invalid=0 send_seq=156039 receive_seq=156039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=54.8 pwm=0.580 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2287289 sysload=0.76 cputime=373.601 memavail=1626896 print_time=7773.106 buffer_time=2.290 print_stall=0 extruder: target=215 temp=214.9 pwm=0.452
Stats 7763.1: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5814204 bytes_read=2682870 bytes_retransmit=9 bytes_invalid=0 send_seq=156060 receive_seq=156060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.058 rpi: temp=57.0 mcu_temp: temp=44.0 sd_pos=2287407 sysload=0.76 cputime=373.654 memavail=1626636 print_time=7773.854 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.9 pwm=0.416
Stats 7764.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=5815197 bytes_read=2683301 bytes_retransmit=9 bytes_invalid=0 send_seq=156086 receive_seq=156086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2287669 sysload=0.76 cputime=373.719 memavail=1626384 print_time=7775.056 buffer_time=2.239 print_stall=0 extruder: target=215 temp=215.1 pwm=0.378
Stats 7765.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=5815920 bytes_read=2683683 bytes_retransmit=9 bytes_invalid=0 send_seq=156105 receive_seq=156105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2287788 sysload=0.76 cputime=373.776 memavail=1626124 print_time=7775.923 buffer_time=2.104 print_stall=0 extruder: target=215 temp=215.0 pwm=0.466
Stats 7766.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=5816676 bytes_read=2684105 bytes_retransmit=9 bytes_invalid=0 send_seq=156126 receive_seq=156126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996319 heater_bed: target=55 temp=55.0 pwm=0.248 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2287907 sysload=0.78 cputime=373.823 memavail=1626152 print_time=7776.872 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 7767.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000044 bytes_write=5818560 bytes_read=2684611 bytes_retransmit=9 bytes_invalid=0 send_seq=156167 receive_seq=156167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.1 pwm=0.024 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=2288774 sysload=0.78 cputime=373.894 memavail=1626164 print_time=7778.604 buffer_time=2.784 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 7768.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5819738 bytes_read=2685053 bytes_retransmit=9 bytes_invalid=0 send_seq=156195 receive_seq=156195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996317 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=2289341 sysload=0.78 cputime=373.948 memavail=1625916 print_time=7778.967 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 7769.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5823475 bytes_read=2685720 bytes_retransmit=9 bytes_invalid=0 send_seq=156265 receive_seq=156265 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996316 heater_bed: target=55 temp=55.0 pwm=0.151 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2291463 sysload=0.78 cputime=374.035 memavail=1625936 print_time=7780.552 buffer_time=2.731 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 7770.1: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5824255 bytes_read=2686136 bytes_retransmit=9 bytes_invalid=0 send_seq=156288 receive_seq=156288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996314 heater_bed: target=55 temp=55.0 pwm=0.080 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2291979 sysload=0.78 cputime=374.099 memavail=1625932 print_time=7780.835 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 7771.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5827108 bytes_read=2686698 bytes_retransmit=9 bytes_invalid=0 send_seq=156343 receive_seq=156343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996318 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2294882 sysload=0.95 cputime=374.203 memavail=1626196 print_time=7782.094 buffer_time=2.270 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 7772.2: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5830508 bytes_read=2687345 bytes_retransmit=9 bytes_invalid=0 send_seq=156409 receive_seq=156409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996320 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2297018 sysload=0.95 cputime=374.299 memavail=1626480 print_time=7783.378 buffer_time=2.547 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 7773.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5832080 bytes_read=2687837 bytes_retransmit=9 bytes_invalid=0 send_seq=156444 receive_seq=156444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996321 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=2297725 sysload=0.95 cputime=374.359 memavail=1626448 print_time=7784.012 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 7774.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5834005 bytes_read=2688324 bytes_retransmit=9 bytes_invalid=0 send_seq=156484 receive_seq=156484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2298924 sysload=0.95 cputime=374.416 memavail=1626136 print_time=7784.950 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 7775.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5835692 bytes_read=2688831 bytes_retransmit=9 bytes_invalid=0 send_seq=156522 receive_seq=156522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.0 pwm=0.019 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=2299870 sysload=0.95 cputime=374.477 memavail=1626380 print_time=7785.960 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.2 pwm=0.342
Stats 7776.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5836876 bytes_read=2689282 bytes_retransmit=9 bytes_invalid=0 send_seq=156552 receive_seq=156552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996323 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2300460 sysload=1.04 cputime=374.535 memavail=1626072 print_time=7786.910 buffer_time=2.077 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 7777.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5839446 bytes_read=2689829 bytes_retransmit=9 bytes_invalid=0 send_seq=156604 receive_seq=156604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=54.9 pwm=0.517 rpi: temp=58.9 mcu_temp: temp=43.9 sd_pos=2302889 sysload=1.04 cputime=374.616 memavail=1626120 print_time=7788.013 buffer_time=2.179 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 7778.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5841542 bytes_read=2690381 bytes_retransmit=9 bytes_invalid=0 send_seq=156648 receive_seq=156648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.055 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2305002 sysload=1.04 cputime=374.713 memavail=1626060 print_time=7789.077 buffer_time=2.243 print_stall=0 extruder: target=215 temp=215.1 pwm=0.486
Stats 7779.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5843342 bytes_read=2690877 bytes_retransmit=9 bytes_invalid=0 send_seq=156687 receive_seq=156687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.085 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2306352 sysload=1.04 cputime=374.791 memavail=1626104 print_time=7789.938 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.2 pwm=0.461
Stats 7780.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5844648 bytes_read=2691314 bytes_retransmit=9 bytes_invalid=0 send_seq=156717 receive_seq=156717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.564 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=2307441 sysload=1.04 cputime=374.863 memavail=1626700 print_time=7790.989 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.9 pwm=0.618
Stats 7781.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5846218 bytes_read=2691816 bytes_retransmit=9 bytes_invalid=0 send_seq=156754 receive_seq=156754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2308341 sysload=1.03 cputime=374.944 memavail=1626400 print_time=7792.048 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 7782.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5848468 bytes_read=2692347 bytes_retransmit=9 bytes_invalid=0 send_seq=156800 receive_seq=156800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2310044 sysload=1.03 cputime=375.030 memavail=1626616 print_time=7792.932 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 7783.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5850433 bytes_read=2692844 bytes_retransmit=9 bytes_invalid=0 send_seq=156842 receive_seq=156842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2312259 sysload=1.03 cputime=375.119 memavail=1626688 print_time=7794.037 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.0 pwm=0.549
Stats 7784.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=5851378 bytes_read=2693301 bytes_retransmit=9 bytes_invalid=0 send_seq=156867 receive_seq=156867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2312681 sysload=1.03 cputime=375.181 memavail=1626880 print_time=7794.905 buffer_time=2.066 print_stall=0 extruder: target=215 temp=214.9 pwm=0.502
Stats 7785.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=5852917 bytes_read=2693777 bytes_retransmit=9 bytes_invalid=0 send_seq=156902 receive_seq=156902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.8 pwm=0.848 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2314260 sysload=1.03 cputime=375.264 memavail=1627412 print_time=7796.043 buffer_time=2.203 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 7786.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=5855674 bytes_read=2694334 bytes_retransmit=9 bytes_invalid=0 send_seq=156956 receive_seq=156956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.404 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=2316646 sysload=1.03 cputime=375.345 memavail=1626640 print_time=7797.124 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.0 pwm=0.434
Stats 7787.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=5857443 bytes_read=2694846 bytes_retransmit=9 bytes_invalid=0 send_seq=156995 receive_seq=156995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.186 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=2318928 sysload=1.03 cputime=375.423 memavail=1626648 print_time=7797.906 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.1 pwm=0.351
Stats 7788.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=5859908 bytes_read=2695397 bytes_retransmit=9 bytes_invalid=0 send_seq=157045 receive_seq=157045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2321610 sysload=1.03 cputime=375.520 memavail=1626396 print_time=7798.981 buffer_time=2.139 print_stall=0 extruder: target=215 temp=215.0 pwm=0.448
Stats 7789.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5861088 bytes_read=2695835 bytes_retransmit=9 bytes_invalid=0 send_seq=157072 receive_seq=157072 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.094 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2322189 sysload=1.03 cputime=375.586 memavail=1626404 print_time=7799.967 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 7790.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5862779 bytes_read=2696342 bytes_retransmit=9 bytes_invalid=0 send_seq=157110 receive_seq=157110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2323752 sysload=1.03 cputime=375.676 memavail=1625860 print_time=7800.946 buffer_time=2.103 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 7791.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5865460 bytes_read=2696913 bytes_retransmit=9 bytes_invalid=0 send_seq=157164 receive_seq=157164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2325898 sysload=1.03 cputime=375.766 memavail=1626388 print_time=7801.978 buffer_time=2.134 print_stall=0 extruder: target=215 temp=214.9 pwm=0.547
Stats 7792.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5867263 bytes_read=2697400 bytes_retransmit=9 bytes_invalid=0 send_seq=157204 receive_seq=157204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.427 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2328940 sysload=1.03 cputime=375.871 memavail=1626700 print_time=7803.029 buffer_time=2.185 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 7793.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=5870317 bytes_read=2698022 bytes_retransmit=9 bytes_invalid=0 send_seq=157265 receive_seq=157265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2331531 sysload=1.03 cputime=375.971 memavail=1626920 print_time=7804.121 buffer_time=2.277 print_stall=0 extruder: target=215 temp=215.0 pwm=0.409
Stats 7794.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=5871871 bytes_read=2698529 bytes_retransmit=9 bytes_invalid=0 send_seq=157303 receive_seq=157303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.372 rpi: temp=58.9 mcu_temp: temp=44.0 sd_pos=2333407 sysload=1.03 cputime=376.056 memavail=1626916 print_time=7804.907 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.1 pwm=0.389
Stats 7795.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=5874412 bytes_read=2699076 bytes_retransmit=9 bytes_invalid=0 send_seq=157355 receive_seq=157355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=2335022 sysload=1.03 cputime=376.146 memavail=1626616 print_time=7806.039 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 7796.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=5875986 bytes_read=2699573 bytes_retransmit=9 bytes_invalid=0 send_seq=157391 receive_seq=157391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2337070 sysload=1.03 cputime=376.217 memavail=1626616 print_time=7807.070 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 7797.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=5877738 bytes_read=2700079 bytes_retransmit=9 bytes_invalid=0 send_seq=157432 receive_seq=157432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=54.9 pwm=0.388 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2338537 sysload=1.03 cputime=376.283 memavail=1626616 print_time=7808.009 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.1 pwm=0.430
Stats 7798.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=5878555 bytes_read=2700476 bytes_retransmit=9 bytes_invalid=0 send_seq=157454 receive_seq=157454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.9 pwm=0.330 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2338857 sysload=1.03 cputime=376.345 memavail=1626616 print_time=7809.103 buffer_time=2.256 print_stall=0 extruder: target=215 temp=215.0 pwm=0.422
Stats 7799.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5879352 bytes_read=2700923 bytes_retransmit=9 bytes_invalid=0 send_seq=157477 receive_seq=157477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.136 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2339270 sysload=1.03 cputime=376.406 memavail=1626612 print_time=7809.993 buffer_time=2.145 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 7800.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5881483 bytes_read=2701459 bytes_retransmit=9 bytes_invalid=0 send_seq=157524 receive_seq=157524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2342111 sysload=1.03 cputime=376.511 memavail=1626860 print_time=7811.083 buffer_time=2.235 print_stall=0 extruder: target=215 temp=215.0 pwm=0.426
Stats 7801.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5882999 bytes_read=2701922 bytes_retransmit=9 bytes_invalid=0 send_seq=157557 receive_seq=157557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.321 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2343581 sysload=0.94 cputime=376.588 memavail=1626628 print_time=7811.991 buffer_time=2.141 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 7802.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5883665 bytes_read=2702344 bytes_retransmit=9 bytes_invalid=0 send_seq=157578 receive_seq=157578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=59.4 mcu_temp: temp=43.3 sd_pos=2343881 sysload=0.94 cputime=376.652 memavail=1626652 print_time=7813.043 buffer_time=2.193 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 7803.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=5884900 bytes_read=2702810 bytes_retransmit=9 bytes_invalid=0 send_seq=157611 receive_seq=157611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.359 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=2345109 sysload=0.94 cputime=376.729 memavail=1626376 print_time=7814.054 buffer_time=2.204 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 7804.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5886901 bytes_read=2703337 bytes_retransmit=9 bytes_invalid=0 send_seq=157656 receive_seq=157656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.156 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2347703 sysload=0.94 cputime=376.823 memavail=1626368 print_time=7815.134 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 7805.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5889347 bytes_read=2703907 bytes_retransmit=9 bytes_invalid=0 send_seq=157708 receive_seq=157708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.191 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2349745 sysload=0.94 cputime=376.912 memavail=1626376 print_time=7816.134 buffer_time=2.281 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 7806.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5891436 bytes_read=2704416 bytes_retransmit=9 bytes_invalid=0 send_seq=157752 receive_seq=157752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.073 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2350280 sysload=1.11 cputime=376.981 memavail=1625840 print_time=7817.103 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.1 pwm=0.368
Stats 7807.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5892808 bytes_read=2704858 bytes_retransmit=9 bytes_invalid=0 send_seq=157785 receive_seq=157785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2350545 sysload=1.11 cputime=377.044 memavail=1625892 print_time=7817.906 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 7808.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000047 bytes_write=5894095 bytes_read=2705323 bytes_retransmit=9 bytes_invalid=0 send_seq=157817 receive_seq=157817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.8 pwm=0.742 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2350781 sysload=1.11 cputime=377.109 memavail=1625884 print_time=7818.965 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.9 pwm=0.513
Stats 7809.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=5895042 bytes_read=2705763 bytes_retransmit=9 bytes_invalid=0 send_seq=157842 receive_seq=157842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=2350955 sysload=1.11 cputime=377.157 memavail=1626396 print_time=7819.874 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 7810.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=5896266 bytes_read=2706200 bytes_retransmit=9 bytes_invalid=0 send_seq=157872 receive_seq=157872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2351220 sysload=1.11 cputime=377.209 memavail=1625872 print_time=7821.160 buffer_time=2.304 print_stall=0 extruder: target=215 temp=214.8 pwm=0.541
Stats 7811.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=5897187 bytes_read=2706637 bytes_retransmit=9 bytes_invalid=0 send_seq=157896 receive_seq=157896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.272 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2351427 sysload=1.02 cputime=377.267 memavail=1625632 print_time=7822.167 buffer_time=2.310 print_stall=0 extruder: target=215 temp=214.8 pwm=0.576
Stats 7812.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=5898283 bytes_read=2707078 bytes_retransmit=9 bytes_invalid=0 send_seq=157924 receive_seq=157924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.377 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2351726 sysload=1.02 cputime=377.326 memavail=1625664 print_time=7823.202 buffer_time=2.344 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 7813.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=5900575 bytes_read=2707595 bytes_retransmit=9 bytes_invalid=0 send_seq=157970 receive_seq=157970 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2352210 sysload=1.02 cputime=377.391 memavail=1625624 print_time=7824.198 buffer_time=2.340 print_stall=0 extruder: target=215 temp=215.1 pwm=0.404
Stats 7814.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=5901894 bytes_read=2708092 bytes_retransmit=9 bytes_invalid=0 send_seq=158003 receive_seq=158003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.327 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2353008 sysload=1.02 cputime=377.447 memavail=1625880 print_time=7825.489 buffer_time=2.630 print_stall=0 extruder: target=215 temp=214.9 pwm=0.497
Stats 7815.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=5903756 bytes_read=2708598 bytes_retransmit=9 bytes_invalid=0 send_seq=158044 receive_seq=158044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.382 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2353891 sysload=1.02 cputime=377.491 memavail=1626128 print_time=7826.176 buffer_time=2.316 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 7816.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=5906225 bytes_read=2709130 bytes_retransmit=9 bytes_invalid=0 send_seq=158093 receive_seq=158093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.288 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2354455 sysload=1.02 cputime=377.548 memavail=1625612 print_time=7827.221 buffer_time=2.360 print_stall=0 extruder: target=215 temp=215.0 pwm=0.499
Stats 7817.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=5908634 bytes_read=2709697 bytes_retransmit=9 bytes_invalid=0 send_seq=158143 receive_seq=158143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2355065 sysload=1.02 cputime=377.618 memavail=1625612 print_time=7827.949 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.579
Stats 7818.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000043 bytes_write=5912470 bytes_read=2710363 bytes_retransmit=9 bytes_invalid=0 send_seq=158216 receive_seq=158216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2356997 sysload=1.02 cputime=377.710 memavail=1625704 print_time=7829.056 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 7819.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000057 bytes_write=5914199 bytes_read=2710856 bytes_retransmit=9 bytes_invalid=0 send_seq=158254 receive_seq=158254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.543 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=2357342 sysload=1.02 cputime=377.772 memavail=1625940 print_time=7830.095 buffer_time=2.233 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 7820.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000057 bytes_write=5915434 bytes_read=2711323 bytes_retransmit=9 bytes_invalid=0 send_seq=158284 receive_seq=158284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=54.9 pwm=0.265 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2357558 sysload=1.02 cputime=377.827 memavail=1625688 print_time=7830.905 buffer_time=2.043 print_stall=0 extruder: target=215 temp=215.1 pwm=0.460
Stats 7821.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000057 bytes_write=5916619 bytes_read=2711769 bytes_retransmit=9 bytes_invalid=0 send_seq=158313 receive_seq=158313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2357802 sysload=0.94 cputime=377.877 memavail=1625880 print_time=7831.960 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.2 pwm=0.380
Stats 7822.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000057 bytes_write=5917873 bytes_read=2712211 bytes_retransmit=9 bytes_invalid=0 send_seq=158344 receive_seq=158344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2358043 sysload=0.94 cputime=377.938 memavail=1625636 print_time=7833.266 buffer_time=2.402 print_stall=0 extruder: target=215 temp=215.1 pwm=0.491
Stats 7823.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000030 mcu_task_stddev=0.000057 bytes_write=5918797 bytes_read=2712653 bytes_retransmit=9 bytes_invalid=0 send_seq=158369 receive_seq=158369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.150 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2358198 sysload=0.94 cputime=377.994 memavail=1625580 print_time=7834.174 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.1 pwm=0.491
Stats 7824.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5919736 bytes_read=2713099 bytes_retransmit=9 bytes_invalid=0 send_seq=158395 receive_seq=158395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.095 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2358349 sysload=0.94 cputime=378.047 memavail=1625824 print_time=7834.956 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 7825.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5922595 bytes_read=2713676 bytes_retransmit=9 bytes_invalid=0 send_seq=158453 receive_seq=158453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=2360156 sysload=0.94 cputime=378.127 memavail=1625564 print_time=7836.257 buffer_time=2.391 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 7826.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5924756 bytes_read=2714223 bytes_retransmit=9 bytes_invalid=0 send_seq=158499 receive_seq=158499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.188 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2360925 sysload=0.94 cputime=378.187 memavail=1625780 print_time=7837.046 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 7827.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5927532 bytes_read=2714799 bytes_retransmit=9 bytes_invalid=0 send_seq=158554 receive_seq=158554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.062 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2361662 sysload=0.94 cputime=378.246 memavail=1625772 print_time=7838.101 buffer_time=2.233 print_stall=0 extruder: target=215 temp=215.1 pwm=0.434
Stats 7828.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000050 bytes_write=5930908 bytes_read=2715416 bytes_retransmit=9 bytes_invalid=0 send_seq=158620 receive_seq=158620 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2363247 sysload=0.94 cputime=378.330 memavail=1625812 print_time=7839.245 buffer_time=2.377 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 7829.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5932834 bytes_read=2715973 bytes_retransmit=9 bytes_invalid=0 send_seq=158662 receive_seq=158662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=11 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2364779 sysload=0.94 cputime=378.413 memavail=1626040 print_time=7840.092 buffer_time=2.224 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 7830.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5935575 bytes_read=2716530 bytes_retransmit=9 bytes_invalid=0 send_seq=158716 receive_seq=158716 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.065 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2367138 sysload=0.94 cputime=378.508 memavail=1625964 print_time=7841.247 buffer_time=2.378 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 7831.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5938332 bytes_read=2717092 bytes_retransmit=9 bytes_invalid=0 send_seq=158771 receive_seq=158771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2368409 sysload=0.87 cputime=378.589 memavail=1626236 print_time=7842.159 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.2 pwm=0.302
Stats 7832.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5940640 bytes_read=2717668 bytes_retransmit=9 bytes_invalid=0 send_seq=158820 receive_seq=158820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2369612 sysload=0.87 cputime=378.671 memavail=1626228 print_time=7843.208 buffer_time=2.338 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 7833.2: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=5942555 bytes_read=2718160 bytes_retransmit=9 bytes_invalid=0 send_seq=158861 receive_seq=158861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=54.9 pwm=0.528 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2370859 sysload=0.87 cputime=378.749 memavail=1625984 print_time=7844.008 buffer_time=2.137 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 7834.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5943532 bytes_read=2718593 bytes_retransmit=9 bytes_invalid=0 send_seq=158887 receive_seq=158887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.214 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2371305 sysload=0.87 cputime=378.819 memavail=1626244 print_time=7845.170 buffer_time=2.299 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 7835.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5945515 bytes_read=2719134 bytes_retransmit=9 bytes_invalid=0 send_seq=158929 receive_seq=158929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2372859 sysload=0.87 cputime=378.900 memavail=1626520 print_time=7845.967 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 7836.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5947948 bytes_read=2719671 bytes_retransmit=9 bytes_invalid=0 send_seq=158979 receive_seq=158979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=54.9 pwm=0.632 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2375285 sysload=0.88 cputime=378.991 memavail=1626356 print_time=7847.050 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 7837.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5949918 bytes_read=2720168 bytes_retransmit=9 bytes_invalid=0 send_seq=159021 receive_seq=159021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=54.9 pwm=0.565 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2376692 sysload=0.88 cputime=379.071 memavail=1626604 print_time=7847.971 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 7838.2: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000049 bytes_write=5951453 bytes_read=2720669 bytes_retransmit=9 bytes_invalid=0 send_seq=159055 receive_seq=159055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2378215 sysload=0.88 cputime=379.153 memavail=1626608 print_time=7848.929 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 7839.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5952281 bytes_read=2721091 bytes_retransmit=9 bytes_invalid=0 send_seq=159079 receive_seq=159079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.116 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2378558 sysload=0.88 cputime=379.216 memavail=1626348 print_time=7849.884 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 7840.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5955155 bytes_read=2721633 bytes_retransmit=9 bytes_invalid=0 send_seq=159136 receive_seq=159130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2380757 sysload=0.88 cputime=379.313 memavail=1626312 print_time=7851.173 buffer_time=2.298 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 7841.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5956740 bytes_read=2722169 bytes_retransmit=9 bytes_invalid=0 send_seq=159171 receive_seq=159171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2382104 sysload=0.81 cputime=379.392 memavail=1626320 print_time=7851.928 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.1 pwm=0.446
Stats 7842.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5958149 bytes_read=2722621 bytes_retransmit=9 bytes_invalid=0 send_seq=159204 receive_seq=159204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2383498 sysload=0.81 cputime=379.474 memavail=1626328 print_time=7853.137 buffer_time=2.262 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 7843.2: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=5959341 bytes_read=2723053 bytes_retransmit=9 bytes_invalid=0 send_seq=159233 receive_seq=159233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2384559 sysload=0.81 cputime=379.550 memavail=1626316 print_time=7854.102 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 7844.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5961250 bytes_read=2723599 bytes_retransmit=9 bytes_invalid=0 send_seq=159273 receive_seq=159273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2386105 sysload=0.81 cputime=379.638 memavail=1626296 print_time=7854.890 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.1 pwm=0.412
Stats 7845.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5963655 bytes_read=2724131 bytes_retransmit=9 bytes_invalid=0 send_seq=159322 receive_seq=159322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2388921 sysload=0.81 cputime=379.734 memavail=1625760 print_time=7855.979 buffer_time=2.103 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 7846.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5965890 bytes_read=2724648 bytes_retransmit=9 bytes_invalid=0 send_seq=159368 receive_seq=159368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.164 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2391532 sysload=0.82 cputime=379.825 memavail=1625752 print_time=7857.013 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.0 pwm=0.521
Stats 7847.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5967509 bytes_read=2725164 bytes_retransmit=9 bytes_invalid=0 send_seq=159405 receive_seq=159405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2392693 sysload=0.82 cputime=379.902 memavail=1625792 print_time=7858.046 buffer_time=2.169 print_stall=0 extruder: target=215 temp=214.9 pwm=0.578
Stats 7848.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=5968868 bytes_read=2725616 bytes_retransmit=9 bytes_invalid=0 send_seq=159438 receive_seq=159438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2393642 sysload=0.82 cputime=379.973 memavail=1626008 print_time=7859.020 buffer_time=2.142 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 7849.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5971239 bytes_read=2726178 bytes_retransmit=9 bytes_invalid=0 send_seq=159487 receive_seq=159487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2395909 sysload=0.82 cputime=380.066 memavail=1626260 print_time=7860.013 buffer_time=2.134 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 7850.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5973330 bytes_read=2726714 bytes_retransmit=9 bytes_invalid=0 send_seq=159531 receive_seq=159531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2398684 sysload=0.82 cputime=380.171 memavail=1626008 print_time=7861.044 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 7851.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5976059 bytes_read=2727271 bytes_retransmit=9 bytes_invalid=0 send_seq=159585 receive_seq=159585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.197 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2401265 sysload=0.76 cputime=380.271 memavail=1626008 print_time=7862.123 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 7852.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5977508 bytes_read=2727738 bytes_retransmit=9 bytes_invalid=0 send_seq=159618 receive_seq=159618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2403014 sysload=0.76 cputime=380.359 memavail=1625780 print_time=7862.892 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.0 pwm=0.441
Stats 7853.2: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=5980099 bytes_read=2728319 bytes_retransmit=9 bytes_invalid=0 send_seq=159671 receive_seq=159671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.674 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2404775 sysload=0.76 cputime=380.447 memavail=1626036 print_time=7864.032 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 7854.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=5981678 bytes_read=2728802 bytes_retransmit=9 bytes_invalid=0 send_seq=159707 receive_seq=159707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.086 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2406776 sysload=0.76 cputime=380.531 memavail=1625764 print_time=7865.063 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 7855.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=5983380 bytes_read=2729294 bytes_retransmit=9 bytes_invalid=0 send_seq=159745 receive_seq=159745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2408180 sysload=0.76 cputime=380.611 memavail=1625768 print_time=7866.003 buffer_time=2.121 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 7856.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=5984103 bytes_read=2729710 bytes_retransmit=9 bytes_invalid=0 send_seq=159765 receive_seq=159765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.149 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2408463 sysload=0.86 cputime=380.664 memavail=1625772 print_time=7866.955 buffer_time=2.072 print_stall=0 extruder: target=215 temp=214.9 pwm=0.559
Stats 7857.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=5984963 bytes_read=2730117 bytes_retransmit=9 bytes_invalid=0 send_seq=159789 receive_seq=159789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2408867 sysload=0.86 cputime=380.715 memavail=1625760 print_time=7867.950 buffer_time=2.067 print_stall=0 extruder: target=215 temp=214.9 pwm=0.494
Stats 7858.2: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=5986857 bytes_read=2730624 bytes_retransmit=9 bytes_invalid=0 send_seq=159830 receive_seq=159830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.628 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2410771 sysload=0.86 cputime=380.787 memavail=1626020 print_time=7869.012 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.433
Stats 7859.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=5988263 bytes_read=2731115 bytes_retransmit=9 bytes_invalid=0 send_seq=159862 receive_seq=159862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.158 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2412017 sysload=0.86 cputime=380.845 memavail=1626092 print_time=7870.104 buffer_time=2.220 print_stall=0 extruder: target=215 temp=214.9 pwm=0.524
Stats 7860.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=5989006 bytes_read=2731502 bytes_retransmit=9 bytes_invalid=0 send_seq=159882 receive_seq=159882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=2412369 sysload=0.86 cputime=380.901 memavail=1626344 print_time=7871.344 buffer_time=2.459 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 7861.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=5990695 bytes_read=2731944 bytes_retransmit=9 bytes_invalid=0 send_seq=159918 receive_seq=159910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2414597 sysload=0.87 cputime=380.986 memavail=1625844 print_time=7872.138 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 7862.2: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=5992215 bytes_read=2732480 bytes_retransmit=9 bytes_invalid=0 send_seq=159954 receive_seq=159954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2416256 sysload=0.87 cputime=381.070 memavail=1625600 print_time=7872.944 buffer_time=2.046 print_stall=0 extruder: target=215 temp=215.0 pwm=0.485
Stats 7863.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5994415 bytes_read=2733023 bytes_retransmit=9 bytes_invalid=0 send_seq=160000 receive_seq=160000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.139 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2417281 sysload=0.87 cputime=381.140 memavail=1625600 print_time=7873.924 buffer_time=2.026 print_stall=0 extruder: target=215 temp=214.9 pwm=0.538
Stats 7864.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5997042 bytes_read=2733595 bytes_retransmit=9 bytes_invalid=0 send_seq=160054 receive_seq=160054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=2418009 sysload=0.87 cputime=381.197 memavail=1625540 print_time=7875.191 buffer_time=2.293 print_stall=0 extruder: target=215 temp=214.8 pwm=0.604
Stats 7865.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=5998589 bytes_read=2734078 bytes_retransmit=9 bytes_invalid=0 send_seq=160090 receive_seq=160090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.062 rpi: temp=58.9 mcu_temp: temp=44.1 sd_pos=2418335 sysload=0.87 cputime=381.252 memavail=1625540 print_time=7876.055 buffer_time=2.155 print_stall=0 extruder: target=215 temp=214.8 pwm=0.537
Stats 7866.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6000785 bytes_read=2734585 bytes_retransmit=9 bytes_invalid=0 send_seq=160136 receive_seq=160136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.273 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2418849 sysload=0.80 cputime=381.306 memavail=1625496 print_time=7877.345 buffer_time=2.446 print_stall=0 extruder: target=215 temp=215.0 pwm=0.421
Stats 7867.2: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6001963 bytes_read=2735006 bytes_retransmit=9 bytes_invalid=0 send_seq=160166 receive_seq=160162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.195 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2419065 sysload=0.80 cputime=381.370 memavail=1625792 print_time=7878.145 buffer_time=2.245 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 7868.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6003209 bytes_read=2735498 bytes_retransmit=9 bytes_invalid=0 send_seq=160196 receive_seq=160196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.124 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2419374 sysload=0.80 cputime=381.434 memavail=1625784 print_time=7879.046 buffer_time=2.145 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 7869.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6004652 bytes_read=2735955 bytes_retransmit=9 bytes_invalid=0 send_seq=160230 receive_seq=160230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.180 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2419655 sysload=0.80 cputime=381.493 memavail=1625856 print_time=7879.967 buffer_time=2.066 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 7870.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6006246 bytes_read=2736437 bytes_retransmit=9 bytes_invalid=0 send_seq=160266 receive_seq=160266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=2419966 sysload=0.80 cputime=381.556 memavail=1625888 print_time=7881.076 buffer_time=2.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 7871.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6008198 bytes_read=2736963 bytes_retransmit=9 bytes_invalid=0 send_seq=160308 receive_seq=160308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.285 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2420937 sysload=0.73 cputime=381.627 memavail=1626076 print_time=7881.928 buffer_time=2.025 print_stall=0 extruder: target=215 temp=214.9 pwm=0.450
Stats 7872.2: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6011528 bytes_read=2737570 bytes_retransmit=9 bytes_invalid=0 send_seq=160372 receive_seq=160372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2422214 sysload=0.73 cputime=381.709 memavail=1626116 print_time=7883.158 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.0 pwm=0.450
Stats 7873.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6013249 bytes_read=2738077 bytes_retransmit=9 bytes_invalid=0 send_seq=160410 receive_seq=160410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.8 pwm=0.822 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2422760 sysload=0.73 cputime=381.776 memavail=1626392 print_time=7884.166 buffer_time=2.260 print_stall=0 extruder: target=215 temp=214.8 pwm=0.581
Stats 7874.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6015016 bytes_read=2738583 bytes_retransmit=9 bytes_invalid=0 send_seq=160448 receive_seq=160448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.029 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2423264 sysload=0.73 cputime=381.843 memavail=1626116 print_time=7885.030 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.452
Stats 7875.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6016445 bytes_read=2739030 bytes_retransmit=9 bytes_invalid=0 send_seq=160480 receive_seq=160480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.105 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2423618 sysload=0.73 cputime=381.907 memavail=1626368 print_time=7885.952 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 7876.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6017646 bytes_read=2739492 bytes_retransmit=9 bytes_invalid=0 send_seq=160509 receive_seq=160509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2423826 sysload=0.67 cputime=381.966 memavail=1626860 print_time=7886.992 buffer_time=2.084 print_stall=0 extruder: target=215 temp=215.1 pwm=0.379
Stats 7877.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6018686 bytes_read=2739918 bytes_retransmit=9 bytes_invalid=0 send_seq=160534 receive_seq=160534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.003 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2424033 sysload=0.67 cputime=382.017 memavail=1626632 print_time=7887.950 buffer_time=2.041 print_stall=0 extruder: target=215 temp=215.2 pwm=0.457
Stats 7878.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6019616 bytes_read=2740330 bytes_retransmit=9 bytes_invalid=0 send_seq=160559 receive_seq=160559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=54.9 pwm=0.553 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2424266 sysload=0.67 cputime=382.078 memavail=1626664 print_time=7888.981 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.1 pwm=0.502
Stats 7879.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=6020545 bytes_read=2740787 bytes_retransmit=9 bytes_invalid=0 send_seq=160584 receive_seq=160584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.151 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=2424478 sysload=0.67 cputime=382.133 memavail=1626640 print_time=7890.241 buffer_time=2.332 print_stall=0 extruder: target=215 temp=215.1 pwm=0.527
Stats 7880.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=6021350 bytes_read=2741203 bytes_retransmit=9 bytes_invalid=0 send_seq=160607 receive_seq=160607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2424627 sysload=0.67 cputime=382.183 memavail=1626888 print_time=7891.011 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 7881.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=6023478 bytes_read=2741720 bytes_retransmit=9 bytes_invalid=0 send_seq=160653 receive_seq=160653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.228 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=2425539 sysload=0.62 cputime=382.253 memavail=1626888 print_time=7891.991 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 7882.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=6026288 bytes_read=2742312 bytes_retransmit=9 bytes_invalid=0 send_seq=160708 receive_seq=160708 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.230 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=2426777 sysload=0.62 cputime=382.331 memavail=1626636 print_time=7893.273 buffer_time=2.362 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 7883.2: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000022 mcu_task_stddev=0.000042 bytes_write=6028568 bytes_read=2742848 bytes_retransmit=9 bytes_invalid=0 send_seq=160755 receive_seq=160755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2427814 sysload=0.62 cputime=382.406 memavail=1626636 print_time=7894.152 buffer_time=2.240 print_stall=0 extruder: target=215 temp=215.1 pwm=0.503
Stats 7884.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=6030182 bytes_read=2743325 bytes_retransmit=9 bytes_invalid=0 send_seq=160790 receive_seq=160790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2429391 sysload=0.62 cputime=382.475 memavail=1626820 print_time=7894.977 buffer_time=2.065 print_stall=0 extruder: target=215 temp=215.1 pwm=0.501
Stats 7885.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=6033377 bytes_read=2743952 bytes_retransmit=9 bytes_invalid=0 send_seq=160852 receive_seq=160852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=2431577 sysload=0.62 cputime=382.548 memavail=1626840 print_time=7896.183 buffer_time=2.270 print_stall=0 extruder: target=215 temp=215.1 pwm=0.501
Stats 7886.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=6035590 bytes_read=2744488 bytes_retransmit=9 bytes_invalid=0 send_seq=160899 receive_seq=160899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2432730 sysload=0.57 cputime=382.621 memavail=1627088 print_time=7896.956 buffer_time=2.042 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 7887.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=6038395 bytes_read=2745060 bytes_retransmit=9 bytes_invalid=0 send_seq=160956 receive_seq=160956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=54.9 pwm=0.437 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2434322 sysload=0.57 cputime=382.707 memavail=1626832 print_time=7898.058 buffer_time=2.143 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 7888.2: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000051 bytes_write=6039530 bytes_read=2745512 bytes_retransmit=9 bytes_invalid=0 send_seq=160983 receive_seq=160983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996322 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.9 sd_pos=2434884 sysload=0.57 cputime=382.775 memavail=1626336 print_time=7899.010 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 7889.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6041242 bytes_read=2746009 bytes_retransmit=9 bytes_invalid=0 send_seq=161019 receive_seq=161019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2436328 sysload=0.57 cputime=382.853 memavail=1626336 print_time=7899.976 buffer_time=2.059 print_stall=0 extruder: target=215 temp=215.0 pwm=0.522
Stats 7890.2: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6044008 bytes_read=2746571 bytes_retransmit=9 bytes_invalid=0 send_seq=161074 receive_seq=161074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.1 pwm=0.044 rpi: temp=57.9 mcu_temp: temp=42.3 sd_pos=2438628 sysload=0.57 cputime=382.932 memavail=1626344 print_time=7901.034 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 7891.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6046048 bytes_read=2747098 bytes_retransmit=9 bytes_invalid=0 send_seq=161116 receive_seq=161116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=59.4 mcu_temp: temp=43.0 sd_pos=2440184 sysload=0.52 cputime=383.002 memavail=1626344 print_time=7901.987 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 7892.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6048586 bytes_read=2747659 bytes_retransmit=9 bytes_invalid=0 send_seq=161168 receive_seq=161168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996324 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2442261 sysload=0.52 cputime=383.099 memavail=1626600 print_time=7903.171 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 7893.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6049775 bytes_read=2748091 bytes_retransmit=9 bytes_invalid=0 send_seq=161197 receive_seq=161197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=2443292 sysload=0.52 cputime=383.165 memavail=1626600 print_time=7903.974 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 7894.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6051392 bytes_read=2748604 bytes_retransmit=9 bytes_invalid=0 send_seq=161233 receive_seq=161233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996325 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2444336 sysload=0.52 cputime=383.227 memavail=1626912 print_time=7905.193 buffer_time=2.274 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 7895.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6053708 bytes_read=2749145 bytes_retransmit=9 bytes_invalid=0 send_seq=161281 receive_seq=161281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.1 pwm=0.011 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2446120 sysload=0.52 cputime=383.295 memavail=1626684 print_time=7906.127 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.2 pwm=0.349
Stats 7896.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6055668 bytes_read=2749642 bytes_retransmit=9 bytes_invalid=0 send_seq=161323 receive_seq=161323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2448206 sysload=0.48 cputime=383.365 memavail=1626652 print_time=7907.144 buffer_time=2.224 print_stall=0 extruder: target=215 temp=215.0 pwm=0.492
Stats 7897.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6056548 bytes_read=2750074 bytes_retransmit=9 bytes_invalid=0 send_seq=161346 receive_seq=161346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2448630 sysload=0.48 cputime=383.418 memavail=1626980 print_time=7907.928 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.0 pwm=0.540
Stats 7898.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=6058246 bytes_read=2750570 bytes_retransmit=9 bytes_invalid=0 send_seq=161382 receive_seq=161382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.9 pwm=0.484 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=2450200 sysload=0.48 cputime=383.498 memavail=1627232 print_time=7909.058 buffer_time=2.137 print_stall=0 extruder: target=215 temp=215.2 pwm=0.371
Stats 7899.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=6060736 bytes_read=2751122 bytes_retransmit=9 bytes_invalid=0 send_seq=161435 receive_seq=161435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2452591 sysload=0.48 cputime=383.584 memavail=1627232 print_time=7910.171 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.0 pwm=0.521
Stats 7900.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=6062452 bytes_read=2751629 bytes_retransmit=9 bytes_invalid=0 send_seq=161473 receive_seq=161473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.108 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2455049 sysload=0.48 cputime=383.674 memavail=1627572 print_time=7910.952 buffer_time=2.030 print_stall=0 extruder: target=215 temp=215.1 pwm=0.419
Stats 7901.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=6064929 bytes_read=2752175 bytes_retransmit=9 bytes_invalid=0 send_seq=161522 receive_seq=161522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=2457467 sysload=0.52 cputime=383.765 memavail=1627792 print_time=7912.001 buffer_time=2.078 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 7902.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=6065938 bytes_read=2752597 bytes_retransmit=9 bytes_invalid=0 send_seq=161549 receive_seq=161549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.065 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2457984 sysload=0.52 cputime=383.832 memavail=1627824 print_time=7913.023 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.0 pwm=0.450
Stats 7903.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000050 bytes_write=6067859 bytes_read=2753124 bytes_retransmit=9 bytes_invalid=0 send_seq=161591 receive_seq=161591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.200 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2460202 sysload=0.52 cputime=383.920 memavail=1627508 print_time=7913.975 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.1 pwm=0.395
Stats 7904.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6070533 bytes_read=2753710 bytes_retransmit=9 bytes_invalid=0 send_seq=161645 receive_seq=161645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.166 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2462257 sysload=0.52 cputime=384.011 memavail=1627504 print_time=7915.020 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 7905.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6072419 bytes_read=2754197 bytes_retransmit=9 bytes_invalid=0 send_seq=161685 receive_seq=161685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.097 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2465364 sysload=0.52 cputime=384.111 memavail=1627756 print_time=7916.052 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.8 pwm=0.561
Stats 7906.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6075392 bytes_read=2754804 bytes_retransmit=9 bytes_invalid=0 send_seq=161743 receive_seq=161743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.025 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=2467830 sysload=0.56 cputime=384.204 memavail=1627816 print_time=7917.113 buffer_time=2.186 print_stall=0 extruder: target=215 temp=214.7 pwm=0.572
Stats 7907.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6076875 bytes_read=2755275 bytes_retransmit=9 bytes_invalid=0 send_seq=161777 receive_seq=161777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=2469521 sysload=0.56 cputime=384.282 memavail=1627320 print_time=7918.027 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 7908.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6079366 bytes_read=2755812 bytes_retransmit=9 bytes_invalid=0 send_seq=161827 receive_seq=161827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2471229 sysload=0.56 cputime=384.366 memavail=1627324 print_time=7919.049 buffer_time=2.120 print_stall=0 extruder: target=215 temp=214.8 pwm=0.521
Stats 7909.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6081240 bytes_read=2756340 bytes_retransmit=9 bytes_invalid=0 send_seq=161866 receive_seq=161866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2473264 sysload=0.56 cputime=384.458 memavail=1627072 print_time=7920.302 buffer_time=2.373 print_stall=0 extruder: target=215 temp=214.9 pwm=0.444
Stats 7910.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6082260 bytes_read=2756761 bytes_retransmit=9 bytes_invalid=0 send_seq=161890 receive_seq=161890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2474163 sysload=0.56 cputime=384.527 memavail=1626844 print_time=7921.058 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.444
Stats 7911.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6082932 bytes_read=2757158 bytes_retransmit=9 bytes_invalid=0 send_seq=161912 receive_seq=161912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2474517 sysload=0.52 cputime=384.591 memavail=1627072 print_time=7922.056 buffer_time=2.125 print_stall=0 extruder: target=215 temp=214.9 pwm=0.435
Stats 7912.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6084450 bytes_read=2757655 bytes_retransmit=9 bytes_invalid=0 send_seq=161948 receive_seq=161948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2475866 sysload=0.52 cputime=384.667 memavail=1627012 print_time=7923.035 buffer_time=2.104 print_stall=0 extruder: target=215 temp=214.8 pwm=0.556
Stats 7913.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6086144 bytes_read=2758146 bytes_retransmit=9 bytes_invalid=0 send_seq=161986 receive_seq=161986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.670 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2477673 sysload=0.52 cputime=384.749 memavail=1627020 print_time=7923.959 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.9 pwm=0.427
Stats 7914.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6087144 bytes_read=2758578 bytes_retransmit=9 bytes_invalid=0 send_seq=162012 receive_seq=162012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2478039 sysload=0.52 cputime=384.814 memavail=1627020 print_time=7925.023 buffer_time=2.091 print_stall=0 extruder: target=215 temp=214.9 pwm=0.460
Stats 7915.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6088322 bytes_read=2759040 bytes_retransmit=9 bytes_invalid=0 send_seq=162041 receive_seq=162041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2479051 sysload=0.52 cputime=384.886 memavail=1627020 print_time=7926.061 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.1 pwm=0.376
Stats 7916.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6090282 bytes_read=2759556 bytes_retransmit=9 bytes_invalid=0 send_seq=162084 receive_seq=162084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.351 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2481823 sysload=0.48 cputime=384.977 memavail=1626772 print_time=7927.112 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.9 pwm=0.476
Stats 7917.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6092845 bytes_read=2760098 bytes_retransmit=9 bytes_invalid=0 send_seq=162135 receive_seq=162135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.008 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2483894 sysload=0.48 cputime=385.064 memavail=1626780 print_time=7928.150 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.0 pwm=0.476
Stats 7918.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6094839 bytes_read=2760635 bytes_retransmit=9 bytes_invalid=0 send_seq=162179 receive_seq=162179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2484368 sysload=0.48 cputime=385.127 memavail=1626744 print_time=7928.947 buffer_time=2.012 print_stall=0 extruder: target=215 temp=215.1 pwm=0.341
Stats 7919.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6096274 bytes_read=2761122 bytes_retransmit=9 bytes_invalid=0 send_seq=162213 receive_seq=162213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.153 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2484695 sysload=0.48 cputime=385.189 memavail=1626788 print_time=7929.951 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 7920.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6097728 bytes_read=2761574 bytes_retransmit=9 bytes_invalid=0 send_seq=162246 receive_seq=162246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.182 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2484962 sysload=0.48 cputime=385.251 memavail=1626788 print_time=7931.171 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.1 pwm=0.363
Stats 7921.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6098768 bytes_read=2762021 bytes_retransmit=9 bytes_invalid=0 send_seq=162272 receive_seq=162272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.154 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2485167 sysload=0.52 cputime=385.310 memavail=1626784 print_time=7932.010 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 7922.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6099910 bytes_read=2762462 bytes_retransmit=9 bytes_invalid=0 send_seq=162300 receive_seq=162300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=2485434 sysload=0.52 cputime=385.360 memavail=1626284 print_time=7933.045 buffer_time=2.109 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 7923.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6101970 bytes_read=2762974 bytes_retransmit=9 bytes_invalid=0 send_seq=162345 receive_seq=162345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2486007 sysload=0.52 cputime=385.412 memavail=1626500 print_time=7934.122 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.1 pwm=0.449
Stats 7924.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6104191 bytes_read=2763536 bytes_retransmit=9 bytes_invalid=0 send_seq=162392 receive_seq=162392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.242 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2487144 sysload=0.52 cputime=385.487 memavail=1626320 print_time=7935.502 buffer_time=2.564 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 7925.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6105828 bytes_read=2764025 bytes_retransmit=9 bytes_invalid=0 send_seq=162430 receive_seq=162430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2488383 sysload=0.52 cputime=385.557 memavail=1626288 print_time=7935.972 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 7926.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6108728 bytes_read=2764592 bytes_retransmit=9 bytes_invalid=0 send_seq=162488 receive_seq=162488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.039 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2489419 sysload=0.48 cputime=385.634 memavail=1626500 print_time=7937.137 buffer_time=2.197 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 7927.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6109750 bytes_read=2765027 bytes_retransmit=9 bytes_invalid=0 send_seq=162514 receive_seq=162514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.076 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2489662 sysload=0.48 cputime=385.696 memavail=1626272 print_time=7938.321 buffer_time=2.381 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 7928.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6110580 bytes_read=2765445 bytes_retransmit=9 bytes_invalid=0 send_seq=162538 receive_seq=162538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2489845 sysload=0.48 cputime=385.755 memavail=1626112 print_time=7939.356 buffer_time=2.416 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 7929.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6111392 bytes_read=2765867 bytes_retransmit=9 bytes_invalid=0 send_seq=162562 receive_seq=162562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2490000 sysload=0.48 cputime=385.813 memavail=1625804 print_time=7940.384 buffer_time=2.443 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 7930.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6112222 bytes_read=2766304 bytes_retransmit=9 bytes_invalid=0 send_seq=162586 receive_seq=162586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.618 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2490125 sysload=0.48 cputime=385.870 memavail=1626036 print_time=7941.275 buffer_time=2.333 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 7931.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6113213 bytes_read=2766740 bytes_retransmit=9 bytes_invalid=0 send_seq=162613 receive_seq=162613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=2490251 sysload=0.44 cputime=385.918 memavail=1626232 print_time=7941.988 buffer_time=2.045 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 7932.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6114161 bytes_read=2767152 bytes_retransmit=9 bytes_invalid=0 send_seq=162638 receive_seq=162638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2490496 sysload=0.44 cputime=385.966 memavail=1626292 print_time=7942.951 buffer_time=2.007 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 7933.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6115417 bytes_read=2767619 bytes_retransmit=9 bytes_invalid=0 send_seq=162668 receive_seq=162668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2490774 sysload=0.44 cputime=386.025 memavail=1626544 print_time=7944.082 buffer_time=2.138 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 7934.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=6117780 bytes_read=2768180 bytes_retransmit=9 bytes_invalid=0 send_seq=162717 receive_seq=162717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.099 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2491389 sysload=0.44 cputime=386.089 memavail=1626544 print_time=7945.145 buffer_time=2.199 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 7935.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=6120734 bytes_read=2768772 bytes_retransmit=9 bytes_invalid=0 send_seq=162778 receive_seq=162778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=54.8 pwm=0.727 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2492450 sysload=0.44 cputime=386.168 memavail=1626544 print_time=7946.288 buffer_time=2.342 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 7936.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=6122011 bytes_read=2769249 bytes_retransmit=9 bytes_invalid=0 send_seq=162810 receive_seq=162810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.038 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2492750 sysload=0.40 cputime=386.218 memavail=1626552 print_time=7947.064 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.9 pwm=0.554
Stats 7937.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=6123807 bytes_read=2769750 bytes_retransmit=9 bytes_invalid=0 send_seq=162850 receive_seq=162850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2493314 sysload=0.40 cputime=386.272 memavail=1626300 print_time=7948.100 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 7938.3: gcodein=0 mcu: mcu_awake=0.015 mcu_task_avg=0.000022 mcu_task_stddev=0.000051 bytes_write=6127512 bytes_read=2770382 bytes_retransmit=9 bytes_invalid=0 send_seq=162919 receive_seq=162919 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=59.4 mcu_temp: temp=43.2 sd_pos=2495630 sysload=0.40 cputime=386.368 memavail=1626628 print_time=7949.500 buffer_time=2.553 print_stall=0 extruder: target=215 temp=215.1 pwm=0.470
Stats 7939.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000044 bytes_write=6129281 bytes_read=2770910 bytes_retransmit=9 bytes_invalid=0 send_seq=162958 receive_seq=162958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2496523 sysload=0.40 cputime=386.437 memavail=1626884 print_time=7950.242 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.0 pwm=0.470
Stats 7940.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000044 bytes_write=6131668 bytes_read=2771461 bytes_retransmit=9 bytes_invalid=0 send_seq=163008 receive_seq=163008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2498593 sysload=0.40 cputime=386.524 memavail=1627136 print_time=7951.255 buffer_time=2.307 print_stall=0 extruder: target=215 temp=215.2 pwm=0.356
Stats 7941.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000044 bytes_write=6134653 bytes_read=2772043 bytes_retransmit=9 bytes_invalid=0 send_seq=163067 receive_seq=163067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.019 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=2500250 sysload=0.45 cputime=386.604 memavail=1626832 print_time=7952.445 buffer_time=2.496 print_stall=0 extruder: target=215 temp=214.8 pwm=0.615
Stats 7942.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000044 bytes_write=6136261 bytes_read=2772550 bytes_retransmit=9 bytes_invalid=0 send_seq=163105 receive_seq=163105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.146 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2500989 sysload=0.45 cputime=386.670 memavail=1626520 print_time=7953.101 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 7943.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000044 bytes_write=6138599 bytes_read=2773101 bytes_retransmit=9 bytes_invalid=0 send_seq=163155 receive_seq=163155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.602 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2502221 sysload=0.45 cputime=386.747 memavail=1626268 print_time=7953.959 buffer_time=2.009 print_stall=0 extruder: target=215 temp=214.9 pwm=0.472
Stats 7944.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6139954 bytes_read=2773564 bytes_retransmit=9 bytes_invalid=0 send_seq=163187 receive_seq=163187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.8 pwm=0.739 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2503194 sysload=0.45 cputime=386.821 memavail=1626520 print_time=7955.131 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 7945.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6142002 bytes_read=2774096 bytes_retransmit=9 bytes_invalid=0 send_seq=163230 receive_seq=163230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2504728 sysload=0.45 cputime=386.901 memavail=1626772 print_time=7955.964 buffer_time=2.013 print_stall=0 extruder: target=215 temp=215.0 pwm=0.483
Stats 7946.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6144317 bytes_read=2774622 bytes_retransmit=9 bytes_invalid=0 send_seq=163275 receive_seq=163275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2507037 sysload=0.41 cputime=386.994 memavail=1627300 print_time=7957.073 buffer_time=2.122 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 7947.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6146355 bytes_read=2775119 bytes_retransmit=9 bytes_invalid=0 send_seq=163317 receive_seq=163317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2508513 sysload=0.41 cputime=387.075 memavail=1627528 print_time=7958.034 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.1 pwm=0.431
Stats 7948.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6148164 bytes_read=2775626 bytes_retransmit=9 bytes_invalid=0 send_seq=163355 receive_seq=163355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2510437 sysload=0.41 cputime=387.160 memavail=1627536 print_time=7959.043 buffer_time=2.091 print_stall=0 extruder: target=215 temp=215.1 pwm=0.511
Stats 7949.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6149361 bytes_read=2776087 bytes_retransmit=9 bytes_invalid=0 send_seq=163384 receive_seq=163384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.089 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2511115 sysload=0.41 cputime=387.227 memavail=1627284 print_time=7960.166 buffer_time=2.215 print_stall=0 extruder: target=215 temp=215.0 pwm=0.452
Stats 7950.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6151787 bytes_read=2776629 bytes_retransmit=9 bytes_invalid=0 send_seq=163435 receive_seq=163435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=2512659 sysload=0.41 cputime=387.310 memavail=1627284 print_time=7961.176 buffer_time=2.223 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 7951.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6153583 bytes_read=2777146 bytes_retransmit=9 bytes_invalid=0 send_seq=163475 receive_seq=163475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2514352 sysload=0.38 cputime=387.394 memavail=1627536 print_time=7961.994 buffer_time=2.041 print_stall=0 extruder: target=215 temp=215.0 pwm=0.472
Stats 7952.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6155076 bytes_read=2777612 bytes_retransmit=9 bytes_invalid=0 send_seq=163508 receive_seq=163508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.032 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2515727 sysload=0.38 cputime=387.470 memavail=1627536 print_time=7963.033 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 7953.3: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6156371 bytes_read=2778054 bytes_retransmit=9 bytes_invalid=0 send_seq=163539 receive_seq=163539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.356 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2516986 sysload=0.38 cputime=387.546 memavail=1627536 print_time=7964.133 buffer_time=2.178 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 7954.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6158302 bytes_read=2778586 bytes_retransmit=9 bytes_invalid=0 send_seq=163579 receive_seq=163579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.8 sd_pos=2518675 sysload=0.38 cputime=387.617 memavail=1627044 print_time=7964.975 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 7955.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6161104 bytes_read=2779162 bytes_retransmit=9 bytes_invalid=0 send_seq=163634 receive_seq=163634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.282 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2521404 sysload=0.38 cputime=387.700 memavail=1627044 print_time=7966.053 buffer_time=2.098 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 7956.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6163438 bytes_read=2779684 bytes_retransmit=9 bytes_invalid=0 send_seq=163681 receive_seq=163681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.099 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2524207 sysload=0.35 cputime=387.791 memavail=1627792 print_time=7967.112 buffer_time=2.156 print_stall=0 extruder: target=215 temp=215.2 pwm=0.286
Stats 7957.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6164895 bytes_read=2780171 bytes_retransmit=9 bytes_invalid=0 send_seq=163715 receive_seq=163715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2525063 sysload=0.35 cputime=387.859 memavail=1627540 print_time=7968.120 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.1 pwm=0.448
Stats 7958.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6166601 bytes_read=2780667 bytes_retransmit=9 bytes_invalid=0 send_seq=163754 receive_seq=163754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2526848 sysload=0.35 cputime=387.940 memavail=1627544 print_time=7969.059 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 7959.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6169333 bytes_read=2781245 bytes_retransmit=9 bytes_invalid=0 send_seq=163809 receive_seq=163809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2529027 sysload=0.35 cputime=388.031 memavail=1627324 print_time=7970.137 buffer_time=2.180 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 7960.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6171139 bytes_read=2781752 bytes_retransmit=9 bytes_invalid=0 send_seq=163847 receive_seq=163847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2532033 sysload=0.35 cputime=388.132 memavail=1627560 print_time=7971.170 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 7961.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6173608 bytes_read=2782308 bytes_retransmit=9 bytes_invalid=0 send_seq=163898 receive_seq=163898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.3 sd_pos=2533913 sysload=0.32 cputime=388.221 memavail=1627544 print_time=7971.995 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 7962.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6175357 bytes_read=2782790 bytes_retransmit=9 bytes_invalid=0 send_seq=163937 receive_seq=163937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2536061 sysload=0.32 cputime=388.308 memavail=1627300 print_time=7972.961 buffer_time=2.002 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 7963.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000061 bytes_write=6178001 bytes_read=2783362 bytes_retransmit=9 bytes_invalid=0 send_seq=163988 receive_seq=163988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.408 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2538118 sysload=0.32 cputime=388.401 memavail=1627300 print_time=7974.183 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 7964.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6179800 bytes_read=2783869 bytes_retransmit=9 bytes_invalid=0 send_seq=164026 receive_seq=164026 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.401 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=2539999 sysload=0.32 cputime=388.494 memavail=1627312 print_time=7975.364 buffer_time=2.403 print_stall=0 extruder: target=215 temp=215.1 pwm=0.418
Stats 7965.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6180982 bytes_read=2784306 bytes_retransmit=9 bytes_invalid=0 send_seq=164056 receive_seq=164056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.474 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2541074 sysload=0.32 cputime=388.570 memavail=1626808 print_time=7975.991 buffer_time=2.030 print_stall=0 extruder: target=215 temp=214.8 pwm=0.586
Stats 7966.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6181850 bytes_read=2784718 bytes_retransmit=9 bytes_invalid=0 send_seq=164077 receive_seq=164075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2541511 sysload=0.30 cputime=388.624 memavail=1626820 print_time=7977.324 buffer_time=2.361 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 7967.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6183045 bytes_read=2785174 bytes_retransmit=9 bytes_invalid=0 send_seq=164106 receive_seq=164106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.389 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2542553 sysload=0.30 cputime=388.687 memavail=1626568 print_time=7977.990 buffer_time=2.028 print_stall=0 extruder: target=215 temp=214.9 pwm=0.537
Stats 7968.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6185028 bytes_read=2785671 bytes_retransmit=9 bytes_invalid=0 send_seq=164148 receive_seq=164148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.299 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2544508 sysload=0.30 cputime=388.773 memavail=1626576 print_time=7979.226 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 7969.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6185725 bytes_read=2786103 bytes_retransmit=9 bytes_invalid=0 send_seq=164168 receive_seq=164168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2544871 sysload=0.30 cputime=388.837 memavail=1626608 print_time=7980.195 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 7970.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6186702 bytes_read=2786529 bytes_retransmit=9 bytes_invalid=0 send_seq=164193 receive_seq=164193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.8 pwm=0.837 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2545668 sysload=0.30 cputime=388.901 memavail=1626792 print_time=7980.975 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.414
Stats 7971.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6188742 bytes_read=2787031 bytes_retransmit=9 bytes_invalid=0 send_seq=164236 receive_seq=164236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2548421 sysload=0.27 cputime=389.003 memavail=1627080 print_time=7982.024 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.482
Stats 7972.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6191902 bytes_read=2787667 bytes_retransmit=9 bytes_invalid=0 send_seq=164297 receive_seq=164297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.0 sd_pos=2550809 sysload=0.27 cputime=389.101 memavail=1627112 print_time=7983.195 buffer_time=2.221 print_stall=0 extruder: target=215 temp=215.1 pwm=0.526
Stats 7973.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6193970 bytes_read=2788164 bytes_retransmit=9 bytes_invalid=0 send_seq=164339 receive_seq=164339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.030 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=2551891 sysload=0.27 cputime=389.177 memavail=1627340 print_time=7984.071 buffer_time=2.094 print_stall=0 extruder: target=215 temp=215.1 pwm=0.492
Stats 7974.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=6196578 bytes_read=2788741 bytes_retransmit=9 bytes_invalid=0 send_seq=164391 receive_seq=164391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2552604 sysload=0.27 cputime=389.251 memavail=1627348 print_time=7985.068 buffer_time=2.087 print_stall=0 extruder: target=215 temp=215.2 pwm=0.381
Stats 7975.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=6198235 bytes_read=2789242 bytes_retransmit=9 bytes_invalid=0 send_seq=164428 receive_seq=164428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=2553017 sysload=0.27 cputime=389.319 memavail=1627352 print_time=7986.146 buffer_time=2.163 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 7976.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=6199334 bytes_read=2789659 bytes_retransmit=9 bytes_invalid=0 send_seq=164454 receive_seq=164454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.532 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2553308 sysload=0.25 cputime=389.380 memavail=1627592 print_time=7987.222 buffer_time=2.236 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 7977.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=6200225 bytes_read=2790076 bytes_retransmit=9 bytes_invalid=0 send_seq=164477 receive_seq=164477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.198 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=2553541 sysload=0.25 cputime=389.443 memavail=1627408 print_time=7988.049 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 7978.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000054 bytes_write=6202016 bytes_read=2790582 bytes_retransmit=9 bytes_invalid=0 send_seq=164515 receive_seq=164515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.124 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2554454 sysload=0.25 cputime=389.502 memavail=1627404 print_time=7989.646 buffer_time=2.657 print_stall=0 extruder: target=215 temp=215.1 pwm=0.527
Stats 7979.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6203346 bytes_read=2791039 bytes_retransmit=9 bytes_invalid=0 send_seq=164546 receive_seq=164546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.056 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2555074 sysload=0.25 cputime=389.555 memavail=1627160 print_time=7990.040 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.1 pwm=0.476
Stats 7980.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6205611 bytes_read=2791566 bytes_retransmit=9 bytes_invalid=0 send_seq=164591 receive_seq=164591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=54.9 pwm=0.469 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2556055 sysload=0.25 cputime=389.630 memavail=1627120 print_time=7991.024 buffer_time=2.034 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 7981.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6206663 bytes_read=2792012 bytes_retransmit=9 bytes_invalid=0 send_seq=164617 receive_seq=164617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=2556301 sysload=0.23 cputime=389.688 memavail=1627160 print_time=7992.027 buffer_time=2.036 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 7982.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6207817 bytes_read=2792439 bytes_retransmit=9 bytes_invalid=0 send_seq=164645 receive_seq=164645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.135 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=2556693 sysload=0.23 cputime=389.745 memavail=1627156 print_time=7993.130 buffer_time=2.139 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 7983.3: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000044 bytes_write=6208778 bytes_read=2792861 bytes_retransmit=9 bytes_invalid=0 send_seq=164669 receive_seq=164669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.490 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2556909 sysload=0.23 cputime=389.789 memavail=1627156 print_time=7994.068 buffer_time=2.076 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 7984.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=6210014 bytes_read=2793323 bytes_retransmit=9 bytes_invalid=0 send_seq=164697 receive_seq=164697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.225 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2557186 sysload=0.23 cputime=389.849 memavail=1627112 print_time=7995.126 buffer_time=2.133 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 7985.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=6211394 bytes_read=2793760 bytes_retransmit=9 bytes_invalid=0 send_seq=164729 receive_seq=164729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2557494 sysload=0.23 cputime=389.908 memavail=1627440 print_time=7995.994 buffer_time=2.000 print_stall=0 extruder: target=215 temp=215.1 pwm=0.366
Stats 7986.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=6213024 bytes_read=2794241 bytes_retransmit=9 bytes_invalid=0 send_seq=164765 receive_seq=164765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2557925 sysload=0.21 cputime=389.971 memavail=1628164 print_time=7997.267 buffer_time=2.274 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 7987.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=6214605 bytes_read=2794711 bytes_retransmit=9 bytes_invalid=0 send_seq=164798 receive_seq=164798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=56.5 mcu_temp: temp=42.9 sd_pos=2558290 sysload=0.21 cputime=390.025 memavail=1627944 print_time=7998.178 buffer_time=2.184 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 7988.3: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000043 bytes_write=6215998 bytes_read=2795158 bytes_retransmit=9 bytes_invalid=0 send_seq=164830 receive_seq=164830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=2558619 sysload=0.21 cputime=390.071 memavail=1627568 print_time=7999.001 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.8 pwm=0.602
Stats 7989.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6217794 bytes_read=2795660 bytes_retransmit=9 bytes_invalid=0 send_seq=164867 receive_seq=164867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2559007 sysload=0.21 cputime=390.136 memavail=1627368 print_time=8000.015 buffer_time=2.019 print_stall=0 extruder: target=215 temp=215.0 pwm=0.386
Stats 7990.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6219865 bytes_read=2796186 bytes_retransmit=9 bytes_invalid=0 send_seq=164909 receive_seq=164909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.006 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=2560092 sysload=0.21 cputime=390.217 memavail=1627680 print_time=8001.206 buffer_time=2.209 print_stall=0 extruder: target=215 temp=214.9 pwm=0.516
Stats 7991.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6221942 bytes_read=2796693 bytes_retransmit=9 bytes_invalid=0 send_seq=164953 receive_seq=164953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.289 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2561400 sysload=0.19 cputime=390.292 memavail=1627680 print_time=8002.196 buffer_time=2.198 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 7992.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6224705 bytes_read=2797270 bytes_retransmit=9 bytes_invalid=0 send_seq=165008 receive_seq=165008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.0 sd_pos=2563619 sysload=0.19 cputime=390.376 memavail=1627428 print_time=8003.311 buffer_time=2.312 print_stall=0 extruder: target=215 temp=215.0 pwm=0.405
Stats 7993.3: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000045 bytes_write=6226541 bytes_read=2797791 bytes_retransmit=9 bytes_invalid=0 send_seq=165049 receive_seq=165049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=2564394 sysload=0.19 cputime=390.447 memavail=1627680 print_time=8004.112 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.9 pwm=0.484
Stats 7994.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000056 bytes_write=6229028 bytes_read=2798344 bytes_retransmit=9 bytes_invalid=0 send_seq=165099 receive_seq=165099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2565834 sysload=0.19 cputime=390.526 memavail=1627684 print_time=8005.063 buffer_time=2.064 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 7995.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000056 bytes_write=6229957 bytes_read=2798756 bytes_retransmit=9 bytes_invalid=0 send_seq=165121 receive_seq=165121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.278 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2566247 sysload=0.19 cputime=390.592 memavail=1626936 print_time=8006.078 buffer_time=2.077 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 7996.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000056 bytes_write=6232514 bytes_read=2799322 bytes_retransmit=9 bytes_invalid=0 send_seq=165171 receive_seq=165171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2568319 sysload=0.18 cputime=390.669 memavail=1626184 print_time=8007.200 buffer_time=2.199 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 7997.3: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000056 bytes_write=6235067 bytes_read=2799859 bytes_retransmit=9 bytes_invalid=0 send_seq=165221 receive_seq=165221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.159 rpi: temp=58.9 mcu_temp: temp=42.9 sd_pos=2570513 sysload=0.18 cputime=390.744 memavail=1626208 print_time=8008.369 buffer_time=2.368 print_stall=0 extruder: target=215 temp=214.8 pwm=0.503
Stats 7998.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6237224 bytes_read=2800407 bytes_retransmit=9 bytes_invalid=0 send_seq=165267 receive_seq=165267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2572044 sysload=0.18 cputime=390.823 memavail=1626400 print_time=8009.299 buffer_time=2.297 print_stall=0 extruder: target=215 temp=215.0 pwm=0.398
Stats 7999.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6238590 bytes_read=2800888 bytes_retransmit=9 bytes_invalid=0 send_seq=165300 receive_seq=165300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.287 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=2573624 sysload=0.18 cputime=390.904 memavail=1626340 print_time=8010.085 buffer_time=2.083 print_stall=0 extruder: target=215 temp=215.0 pwm=0.433
Stats 8000.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6239932 bytes_read=2801325 bytes_retransmit=9 bytes_invalid=0 send_seq=165330 receive_seq=165330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2574365 sysload=0.18 cputime=390.974 memavail=1626380 print_time=8011.264 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.0 pwm=0.484
Stats 8001.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6241763 bytes_read=2801822 bytes_retransmit=9 bytes_invalid=0 send_seq=165369 receive_seq=165369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2575384 sysload=0.16 cputime=391.045 memavail=1626384 print_time=8012.013 buffer_time=2.009 print_stall=0 extruder: target=215 temp=215.1 pwm=0.401
Stats 8002.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6244108 bytes_read=2802378 bytes_retransmit=9 bytes_invalid=0 send_seq=165417 receive_seq=165417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=57.0 mcu_temp: temp=43.0 sd_pos=2577561 sysload=0.16 cputime=391.129 memavail=1626636 print_time=8013.086 buffer_time=2.081 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 8003.3: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6245578 bytes_read=2802835 bytes_retransmit=9 bytes_invalid=0 send_seq=165451 receive_seq=165451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2578903 sysload=0.16 cputime=391.194 memavail=1626888 print_time=8014.062 buffer_time=2.056 print_stall=0 extruder: target=215 temp=214.9 pwm=0.559
Stats 8004.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=6247097 bytes_read=2803322 bytes_retransmit=9 bytes_invalid=0 send_seq=165485 receive_seq=165485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.464 rpi: temp=58.9 mcu_temp: temp=43.0 sd_pos=2580195 sysload=0.16 cputime=391.263 memavail=1626888 print_time=8015.229 buffer_time=2.223 print_stall=0 extruder: target=215 temp=215.0 pwm=0.494
Stats 8005.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=6248918 bytes_read=2803838 bytes_retransmit=9 bytes_invalid=0 send_seq=165525 receive_seq=165525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2581915 sysload=0.16 cputime=391.325 memavail=1626696 print_time=8016.055 buffer_time=2.047 print_stall=0 extruder: target=215 temp=215.1 pwm=0.429
Stats 8006.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=6251330 bytes_read=2804360 bytes_retransmit=9 bytes_invalid=0 send_seq=165572 receive_seq=165572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.127 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=2584657 sysload=0.15 cputime=391.401 memavail=1626708 print_time=8017.130 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 8007.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=6253903 bytes_read=2804947 bytes_retransmit=9 bytes_invalid=0 send_seq=165626 receive_seq=165626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2587396 sysload=0.15 cputime=391.502 memavail=1626204 print_time=8018.212 buffer_time=2.203 print_stall=0 extruder: target=215 temp=214.9 pwm=0.507
Stats 8008.3: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000054 bytes_write=6254998 bytes_read=2805378 bytes_retransmit=9 bytes_invalid=0 send_seq=165652 receive_seq=165652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=2587852 sysload=0.15 cputime=391.566 memavail=1626460 print_time=8019.134 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.2 pwm=0.347
Stats 8009.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=6256760 bytes_read=2805875 bytes_retransmit=9 bytes_invalid=0 send_seq=165691 receive_seq=165691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.507 rpi: temp=58.9 mcu_temp: temp=43.8 sd_pos=2589907 sysload=0.15 cputime=391.654 memavail=1626716 print_time=8020.078 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.8 pwm=0.649
Stats 8010.3: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=6259448 bytes_read=2806462 bytes_retransmit=9 bytes_invalid=0 send_seq=165745 receive_seq=165745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=2591951 sysload=0.15 cputime=391.745 memavail=1626968 print_time=8021.117 buffer_time=2.107 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 8011.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=6261298 bytes_read=2806958 bytes_retransmit=9 bytes_invalid=0 send_seq=165784 receive_seq=165784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996371 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=42.6 sd_pos=2595029 sysload=0.14 cputime=391.843 memavail=1627220 print_time=8022.124 buffer_time=2.113 print_stall=0 extruder: target=215 temp=214.9 pwm=0.532
Stats 8012.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=6264278 bytes_read=2807535 bytes_retransmit=9 bytes_invalid=0 send_seq=165842 receive_seq=165842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996370 heater_bed: target=55 temp=54.9 pwm=0.565 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2597488 sysload=0.14 cputime=391.935 memavail=1627220 print_time=8023.220 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 8013.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000049 bytes_write=6265832 bytes_read=2808022 bytes_retransmit=9 bytes_invalid=0 send_seq=165876 receive_seq=165876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996367 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=2599189 sysload=0.14 cputime=392.018 memavail=1627224 print_time=8024.137 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.0 pwm=0.459
Stats 8014.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6268260 bytes_read=2808594 bytes_retransmit=9 bytes_invalid=0 send_seq=165927 receive_seq=165927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.265 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2600943 sysload=0.14 cputime=392.106 memavail=1627224 print_time=8025.153 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.8 pwm=0.577
Stats 8015.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6270494 bytes_read=2809111 bytes_retransmit=9 bytes_invalid=0 send_seq=165973 receive_seq=165973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.0 pwm=0.101 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=2602948 sysload=0.14 cputime=392.196 memavail=1627224 print_time=8026.378 buffer_time=2.364 print_stall=0 extruder: target=215 temp=214.8 pwm=0.536
Stats 8016.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6271564 bytes_read=2809558 bytes_retransmit=9 bytes_invalid=0 send_seq=165999 receive_seq=165999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=2603786 sysload=0.13 cputime=392.255 memavail=1626656 print_time=8027.052 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 8017.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6272259 bytes_read=2809959 bytes_retransmit=9 bytes_invalid=0 send_seq=166019 receive_seq=166019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=2604051 sysload=0.13 cputime=392.306 memavail=1626908 print_time=8028.112 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.0 pwm=0.425
Stats 8018.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6273869 bytes_read=2810421 bytes_retransmit=9 bytes_invalid=0 send_seq=166054 receive_seq=166054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2605581 sysload=0.13 cputime=392.395 memavail=1626664 print_time=8029.053 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 8019.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=6275310 bytes_read=2810913 bytes_retransmit=9 bytes_invalid=0 send_seq=166086 receive_seq=166086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.238 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=2606962 sysload=0.13 cputime=392.474 memavail=1626916 print_time=8030.017 buffer_time=2.001 print_stall=0 extruder: target=215 temp=215.0 pwm=0.446
Stats 8020.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=6276022 bytes_read=2811319 bytes_retransmit=9 bytes_invalid=0 send_seq=166107 receive_seq=166107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.325 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2607237 sysload=0.13 cputime=392.536 memavail=1627168 print_time=8031.077 buffer_time=2.060 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 8021.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=6278154 bytes_read=2811831 bytes_retransmit=9 bytes_invalid=0 send_seq=166152 receive_seq=166152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.280 rpi: temp=57.0 mcu_temp: temp=43.0 sd_pos=2610597 sysload=0.12 cputime=392.635 memavail=1627220 print_time=8032.108 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 8022.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=6280703 bytes_read=2812393 bytes_retransmit=9 bytes_invalid=0 send_seq=166201 receive_seq=166201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.091 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=2613481 sysload=0.12 cputime=392.741 memavail=1627212 print_time=8033.333 buffer_time=2.315 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 8023.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000028 mcu_task_stddev=0.000064 bytes_write=6283453 bytes_read=2812969 bytes_retransmit=9 bytes_invalid=0 send_seq=166256 receive_seq=166256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996359 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=2614226 sysload=0.12 cputime=392.809 memavail=1627168 print_time=8034.274 buffer_time=2.256 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 8024.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6285137 bytes_read=2813451 bytes_retransmit=9 bytes_invalid=0 send_seq=166292 receive_seq=166292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.126 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2614581 sysload=0.12 cputime=392.871 memavail=1627156 print_time=8035.296 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.9 pwm=0.546
Stats 8025.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6286346 bytes_read=2813908 bytes_retransmit=9 bytes_invalid=0 send_seq=166320 receive_seq=166320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.281 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=2614876 sysload=0.12 cputime=392.933 memavail=1626728 print_time=8036.149 buffer_time=2.128 print_stall=0 extruder: target=215 temp=214.9 pwm=0.548
Stats 8026.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6287668 bytes_read=2814364 bytes_retransmit=9 bytes_invalid=0 send_seq=166351 receive_seq=166351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.1 pwm=0.096 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=2615260 sysload=0.11 cputime=392.994 memavail=1626476 print_time=8037.193 buffer_time=2.171 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 8027.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6290197 bytes_read=2814906 bytes_retransmit=9 bytes_invalid=0 send_seq=166402 receive_seq=166402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.7 sd_pos=2616875 sysload=0.11 cputime=393.075 memavail=1627028 print_time=8038.618 buffer_time=2.595 print_stall=0 extruder: target=215 temp=214.9 pwm=0.506
Stats 8028.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6292204 bytes_read=2815433 bytes_retransmit=9 bytes_invalid=0 send_seq=166444 receive_seq=166444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.459 rpi: temp=58.9 mcu_temp: temp=42.9 sd_pos=2618464 sysload=0.11 cputime=393.151 memavail=1626524 print_time=8039.202 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.8 pwm=0.522
Stats 8029.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=6294590 bytes_read=2815999 bytes_retransmit=9 bytes_invalid=0 send_seq=166494 receive_seq=166494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2619743 sysload=0.11 cputime=393.229 memavail=1626804 print_time=8040.038 buffer_time=2.013 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 8030.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=6297960 bytes_read=2816606 bytes_retransmit=9 bytes_invalid=0 send_seq=166558 receive_seq=166558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.511 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2620887 sysload=0.11 cputime=393.308 memavail=1626552 print_time=8041.038 buffer_time=2.013 print_stall=0 extruder: target=215 temp=214.7 pwm=0.513
Stats 8031.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=6299471 bytes_read=2817088 bytes_retransmit=9 bytes_invalid=0 send_seq=166591 receive_seq=166591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2621257 sysload=0.10 cputime=393.370 memavail=1627056 print_time=8042.212 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.455
Stats 8032.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=6300682 bytes_read=2817534 bytes_retransmit=9 bytes_invalid=0 send_seq=166620 receive_seq=166620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.170 rpi: temp=57.9 mcu_temp: temp=42.3 sd_pos=2621593 sysload=0.10 cputime=393.423 memavail=1626804 print_time=8043.254 buffer_time=2.228 print_stall=0 extruder: target=215 temp=214.9 pwm=0.455
Stats 8033.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000046 bytes_write=6301861 bytes_read=2817951 bytes_retransmit=9 bytes_invalid=0 send_seq=166646 receive_seq=166646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=2621786 sysload=0.10 cputime=393.470 memavail=1626804 print_time=8044.288 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.8 pwm=0.533
Stats 8034.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6302729 bytes_read=2818398 bytes_retransmit=9 bytes_invalid=0 send_seq=166669 receive_seq=166669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.204 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=2621912 sysload=0.10 cputime=393.530 memavail=1627052 print_time=8045.253 buffer_time=2.226 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 8035.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6303558 bytes_read=2818819 bytes_retransmit=9 bytes_invalid=0 send_seq=166693 receive_seq=166693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2622065 sysload=0.10 cputime=393.588 memavail=1627052 print_time=8046.163 buffer_time=2.135 print_stall=0 extruder: target=215 temp=215.1 pwm=0.371
Stats 8036.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6305380 bytes_read=2819301 bytes_retransmit=9 bytes_invalid=0 send_seq=166732 receive_seq=166732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2622587 sysload=0.09 cputime=393.653 memavail=1627024 print_time=8047.278 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.9 pwm=0.466
Stats 8037.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6307322 bytes_read=2819818 bytes_retransmit=9 bytes_invalid=0 send_seq=166772 receive_seq=166772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=57.0 mcu_temp: temp=42.9 sd_pos=2623093 sysload=0.09 cputime=393.717 memavail=1627312 print_time=8048.111 buffer_time=2.081 print_stall=0 extruder: target=215 temp=215.1 pwm=0.371
Stats 8038.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6308977 bytes_read=2820299 bytes_retransmit=9 bytes_invalid=0 send_seq=166808 receive_seq=166808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=2623538 sysload=0.09 cputime=393.784 memavail=1627060 print_time=8049.256 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.0 pwm=0.442
Stats 8039.4: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6311128 bytes_read=2820821 bytes_retransmit=9 bytes_invalid=0 send_seq=166852 receive_seq=166852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=57.9 mcu_temp: temp=42.6 sd_pos=2624813 sysload=0.09 cputime=393.862 memavail=1627292 print_time=8050.197 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.0 pwm=0.434
Stats 8040.4: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6313575 bytes_read=2821383 bytes_retransmit=9 bytes_invalid=0 send_seq=166901 receive_seq=166901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.480 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2626654 sysload=0.09 cputime=393.949 memavail=1627068 print_time=8051.259 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.495
Stats 8041.4: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6315690 bytes_read=2821919 bytes_retransmit=9 bytes_invalid=0 send_seq=166948 receive_seq=166948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2628060 sysload=0.08 cputime=394.026 memavail=1626756 print_time=8052.058 buffer_time=2.024 print_stall=0 extruder: target=215 temp=214.9 pwm=0.539
Stats 8042.4: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6318443 bytes_read=2822476 bytes_retransmit=9 bytes_invalid=0 send_seq=167002 receive_seq=167002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=2629554 sysload=0.08 cputime=394.103 memavail=1626756 print_time=8053.172 buffer_time=2.137 print_stall=0 extruder: target=215 temp=214.9 pwm=0.550
Stats 8043.4: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6320007 bytes_read=2822961 bytes_retransmit=9 bytes_invalid=0 send_seq=167036 receive_seq=167036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.161 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2630476 sysload=0.08 cputime=394.175 memavail=1626504 print_time=8054.278 buffer_time=2.243 print_stall=0 extruder: target=215 temp=214.7 pwm=0.550
Stats 8044.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6321941 bytes_read=2823468 bytes_retransmit=9 bytes_invalid=0 send_seq=167076 receive_seq=167076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.468 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=2632090 sysload=0.08 cputime=394.254 memavail=1626444 print_time=8055.209 buffer_time=2.173 print_stall=0 extruder: target=215 temp=214.9 pwm=0.435
Stats 8045.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6324269 bytes_read=2823974 bytes_retransmit=9 bytes_invalid=0 send_seq=167122 receive_seq=167122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.8 sd_pos=2634307 sysload=0.08 cputime=394.348 memavail=1625952 print_time=8056.273 buffer_time=2.236 print_stall=0 extruder: target=215 temp=214.9 pwm=0.487
Stats 8046.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6326360 bytes_read=2824494 bytes_retransmit=9 bytes_invalid=0 send_seq=167165 receive_seq=167165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.434 rpi: temp=57.5 mcu_temp: temp=42.7 sd_pos=2635796 sysload=0.08 cputime=394.429 memavail=1625704 print_time=8057.254 buffer_time=2.217 print_stall=0 extruder: target=215 temp=215.0 pwm=0.406
Stats 8047.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6328477 bytes_read=2825026 bytes_retransmit=9 bytes_invalid=0 send_seq=167210 receive_seq=167210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=2637331 sysload=0.08 cputime=394.516 memavail=1626220 print_time=8058.160 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 8048.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6329732 bytes_read=2825453 bytes_retransmit=9 bytes_invalid=0 send_seq=167238 receive_seq=167238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.313 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2638475 sysload=0.08 cputime=394.596 memavail=1625908 print_time=8059.153 buffer_time=2.115 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 8049.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6331962 bytes_read=2826006 bytes_retransmit=9 bytes_invalid=0 send_seq=167282 receive_seq=167282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=2639638 sysload=0.08 cputime=394.677 memavail=1625908 print_time=8060.292 buffer_time=2.253 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 8050.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6333824 bytes_read=2826507 bytes_retransmit=9 bytes_invalid=0 send_seq=167322 receive_seq=167322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2641218 sysload=0.08 cputime=394.756 memavail=1626416 print_time=8061.077 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 8051.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6335971 bytes_read=2827014 bytes_retransmit=9 bytes_invalid=0 send_seq=167366 receive_seq=167366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.429 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=2643313 sysload=0.07 cputime=394.853 memavail=1626104 print_time=8062.350 buffer_time=2.308 print_stall=0 extruder: target=215 temp=215.0 pwm=0.503
Stats 8052.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6337007 bytes_read=2827466 bytes_retransmit=9 bytes_invalid=0 send_seq=167393 receive_seq=167393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.454 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=2644079 sysload=0.07 cputime=394.919 memavail=1626348 print_time=8063.250 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.0 pwm=0.525
Stats 8053.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=6339253 bytes_read=2827983 bytes_retransmit=9 bytes_invalid=0 send_seq=167438 receive_seq=167433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.130 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2646388 sysload=0.07 cputime=395.012 memavail=1626348 print_time=8064.318 buffer_time=2.270 print_stall=0 extruder: target=215 temp=215.2 pwm=0.389
Stats 8054.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6341181 bytes_read=2828500 bytes_retransmit=9 bytes_invalid=0 send_seq=167479 receive_seq=167479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=2648320 sysload=0.07 cputime=395.094 memavail=1626476 print_time=8065.128 buffer_time=2.080 print_stall=0 extruder: target=215 temp=215.1 pwm=0.432
Stats 8055.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6343578 bytes_read=2829062 bytes_retransmit=9 bytes_invalid=0 send_seq=167528 receive_seq=167528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.129 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=2650940 sysload=0.07 cputime=395.189 memavail=1626484 print_time=8066.182 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 8056.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6345170 bytes_read=2829543 bytes_retransmit=9 bytes_invalid=0 send_seq=167564 receive_seq=167564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.150 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2652164 sysload=0.06 cputime=395.256 memavail=1626232 print_time=8067.210 buffer_time=2.160 print_stall=0 extruder: target=215 temp=215.0 pwm=0.525
Stats 8057.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6346780 bytes_read=2830005 bytes_retransmit=9 bytes_invalid=0 send_seq=167599 receive_seq=167599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.283 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2654003 sysload=0.06 cputime=395.325 memavail=1625952 print_time=8068.137 buffer_time=2.087 print_stall=0 extruder: target=215 temp=214.9 pwm=0.525
Stats 8058.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000062 bytes_write=6349470 bytes_read=2830597 bytes_retransmit=9 bytes_invalid=0 send_seq=167654 receive_seq=167654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.277 rpi: temp=57.0 mcu_temp: temp=43.3 sd_pos=2656232 sysload=0.06 cputime=395.414 memavail=1625988 print_time=8069.177 buffer_time=2.126 print_stall=0 extruder: target=215 temp=214.9 pwm=0.577
Stats 8059.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6351326 bytes_read=2831114 bytes_retransmit=9 bytes_invalid=0 send_seq=167694 receive_seq=167694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.004 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2659331 sysload=0.06 cputime=395.512 memavail=1626180 print_time=8070.209 buffer_time=2.157 print_stall=0 extruder: target=215 temp=214.9 pwm=0.465
Stats 8060.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6353909 bytes_read=2831656 bytes_retransmit=9 bytes_invalid=0 send_seq=167745 receive_seq=167745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.751 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2661302 sysload=0.06 cputime=395.602 memavail=1626184 print_time=8071.078 buffer_time=2.025 print_stall=0 extruder: target=215 temp=214.8 pwm=0.585
Stats 8061.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6355697 bytes_read=2832168 bytes_retransmit=9 bytes_invalid=0 send_seq=167784 receive_seq=167784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=2663477 sysload=0.06 cputime=395.700 memavail=1625908 print_time=8072.187 buffer_time=2.134 print_stall=0 extruder: target=215 temp=214.8 pwm=0.525
Stats 8062.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6358228 bytes_read=2832719 bytes_retransmit=9 bytes_invalid=0 send_seq=167834 receive_seq=167834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.179 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2665245 sysload=0.06 cputime=395.790 memavail=1625844 print_time=8073.214 buffer_time=2.161 print_stall=0 extruder: target=215 temp=214.8 pwm=0.538
Stats 8063.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6360131 bytes_read=2833206 bytes_retransmit=9 bytes_invalid=0 send_seq=167874 receive_seq=167874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.258 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2667279 sysload=0.06 cputime=395.879 memavail=1625848 print_time=8074.468 buffer_time=2.413 print_stall=0 extruder: target=215 temp=214.8 pwm=0.580
Stats 8064.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6361223 bytes_read=2833674 bytes_retransmit=9 bytes_invalid=0 send_seq=167901 receive_seq=167901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2668144 sysload=0.06 cputime=395.947 memavail=1625788 print_time=8075.210 buffer_time=2.155 print_stall=0 extruder: target=215 temp=214.9 pwm=0.430
Stats 8065.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6362072 bytes_read=2834095 bytes_retransmit=9 bytes_invalid=0 send_seq=167925 receive_seq=167925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.125 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=2668588 sysload=0.06 cputime=396.013 memavail=1625536 print_time=8076.349 buffer_time=2.294 print_stall=0 extruder: target=215 temp=214.8 pwm=0.561
Stats 8066.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6363483 bytes_read=2834552 bytes_retransmit=9 bytes_invalid=0 send_seq=167959 receive_seq=167959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2669947 sysload=0.05 cputime=396.088 memavail=1625488 print_time=8077.134 buffer_time=2.078 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 8067.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6364774 bytes_read=2835014 bytes_retransmit=9 bytes_invalid=0 send_seq=167988 receive_seq=167988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2671167 sysload=0.05 cputime=396.166 memavail=1625492 print_time=8078.322 buffer_time=2.266 print_stall=0 extruder: target=215 temp=215.0 pwm=0.458
Stats 8068.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6365752 bytes_read=2835440 bytes_retransmit=9 bytes_invalid=0 send_seq=168013 receive_seq=168013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.496 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2671874 sysload=0.05 cputime=396.229 memavail=1625744 print_time=8079.268 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.1 pwm=0.393
Stats 8069.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=6367906 bytes_read=2835972 bytes_retransmit=9 bytes_invalid=0 send_seq=168059 receive_seq=168059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.498 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2674673 sysload=0.05 cputime=396.332 memavail=1625996 print_time=8080.321 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.1 pwm=0.469
Stats 8070.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=6370609 bytes_read=2836514 bytes_retransmit=9 bytes_invalid=0 send_seq=168116 receive_seq=168104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=370 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.301 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2677807 sysload=0.05 cputime=396.440 memavail=1625996 print_time=8081.406 buffer_time=2.339 print_stall=0 extruder: target=215 temp=215.3 pwm=0.336
Stats 8071.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=6373405 bytes_read=2837150 bytes_retransmit=9 bytes_invalid=0 send_seq=168171 receive_seq=168171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.301 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2678789 sysload=0.05 cputime=396.514 memavail=1626000 print_time=8082.286 buffer_time=2.218 print_stall=0 extruder: target=215 temp=215.1 pwm=0.488
Stats 8072.4: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000049 bytes_write=6375023 bytes_read=2837617 bytes_retransmit=9 bytes_invalid=0 send_seq=168207 receive_seq=168207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=54.9 pwm=0.438 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2679192 sysload=0.05 cputime=396.579 memavail=1626252 print_time=8083.202 buffer_time=2.133 print_stall=0 extruder: target=215 temp=215.1 pwm=0.539
Stats 8073.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6376476 bytes_read=2838139 bytes_retransmit=9 bytes_invalid=0 send_seq=168242 receive_seq=168242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=11 freq=71996335 heater_bed: target=55 temp=54.9 pwm=0.310 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2679591 sysload=0.05 cputime=396.644 memavail=1626260 print_time=8084.511 buffer_time=2.442 print_stall=0 extruder: target=215 temp=215.0 pwm=0.567
Stats 8074.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6377748 bytes_read=2838576 bytes_retransmit=9 bytes_invalid=0 send_seq=168272 receive_seq=168272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=54.9 pwm=0.250 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2679893 sysload=0.05 cputime=396.706 memavail=1626248 print_time=8085.286 buffer_time=2.216 print_stall=0 extruder: target=215 temp=215.1 pwm=0.532
Stats 8075.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6379590 bytes_read=2839068 bytes_retransmit=9 bytes_invalid=0 send_seq=168313 receive_seq=168313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=2680385 sysload=0.05 cputime=396.772 memavail=1626512 print_time=8086.371 buffer_time=2.301 print_stall=0 extruder: target=215 temp=215.1 pwm=0.443
Stats 8076.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6381176 bytes_read=2839574 bytes_retransmit=9 bytes_invalid=0 send_seq=168348 receive_seq=168348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.205 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=2680756 sysload=0.04 cputime=396.827 memavail=1626760 print_time=8087.390 buffer_time=2.320 print_stall=0 extruder: target=215 temp=215.0 pwm=0.558
Stats 8077.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6383219 bytes_read=2840081 bytes_retransmit=9 bytes_invalid=0 send_seq=168392 receive_seq=168392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2681199 sysload=0.04 cputime=396.884 memavail=1626832 print_time=8088.426 buffer_time=2.354 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 8078.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6384856 bytes_read=2840558 bytes_retransmit=9 bytes_invalid=0 send_seq=168430 receive_seq=168430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=54.9 pwm=0.476 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2681645 sysload=0.04 cputime=396.954 memavail=1626588 print_time=8089.316 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 8079.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=6386198 bytes_read=2841054 bytes_retransmit=9 bytes_invalid=0 send_seq=168460 receive_seq=168460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=56.5 mcu_temp: temp=43.5 sd_pos=2682117 sysload=0.04 cputime=397.020 memavail=1626592 print_time=8090.239 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 8080.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=6388894 bytes_read=2841606 bytes_retransmit=9 bytes_invalid=0 send_seq=168513 receive_seq=168513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.031 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2683806 sysload=0.04 cputime=397.106 memavail=1626592 print_time=8091.347 buffer_time=2.273 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 8081.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=6390964 bytes_read=2842108 bytes_retransmit=9 bytes_invalid=0 send_seq=168556 receive_seq=168556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=54.9 pwm=0.444 rpi: temp=57.0 mcu_temp: temp=43.1 sd_pos=2684223 sysload=0.04 cputime=397.175 memavail=1626592 print_time=8092.210 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.0 pwm=0.511
Stats 8082.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=6392531 bytes_read=2842609 bytes_retransmit=9 bytes_invalid=0 send_seq=168590 receive_seq=168590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.378 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2684635 sysload=0.04 cputime=397.248 memavail=1626844 print_time=8093.425 buffer_time=2.350 print_stall=0 extruder: target=215 temp=215.1 pwm=0.369
Stats 8083.4: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000043 bytes_write=6394457 bytes_read=2843111 bytes_retransmit=9 bytes_invalid=0 send_seq=168633 receive_seq=168633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.557 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2685742 sysload=0.04 cputime=397.323 memavail=1626592 print_time=8094.695 buffer_time=2.619 print_stall=0 extruder: target=215 temp=215.0 pwm=0.530
Stats 8084.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000057 bytes_write=6396297 bytes_read=2843604 bytes_retransmit=9 bytes_invalid=0 send_seq=168671 receive_seq=168671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.193 rpi: temp=56.5 mcu_temp: temp=43.4 sd_pos=2687050 sysload=0.04 cputime=397.399 memavail=1626600 print_time=8095.372 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 8085.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000057 bytes_write=6399041 bytes_read=2844145 bytes_retransmit=9 bytes_invalid=0 send_seq=168725 receive_seq=168713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=383 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.175 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2689180 sysload=0.04 cputime=397.491 memavail=1626600 print_time=8096.661 buffer_time=2.565 print_stall=0 extruder: target=215 temp=215.1 pwm=0.423
Stats 8086.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000057 bytes_write=6400913 bytes_read=2844682 bytes_retransmit=9 bytes_invalid=0 send_seq=168763 receive_seq=168763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2689916 sysload=0.04 cputime=397.548 memavail=1626600 print_time=8097.306 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 8087.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000057 bytes_write=6403304 bytes_read=2845224 bytes_retransmit=9 bytes_invalid=0 send_seq=168811 receive_seq=168811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.369 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2690894 sysload=0.04 cputime=397.609 memavail=1626352 print_time=8098.334 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 8088.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000057 bytes_write=6404450 bytes_read=2845675 bytes_retransmit=9 bytes_invalid=0 send_seq=168838 receive_seq=168838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2691905 sysload=0.04 cputime=397.682 memavail=1625736 print_time=8099.208 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.1 pwm=0.435
Stats 8089.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6406867 bytes_read=2846218 bytes_retransmit=9 bytes_invalid=0 send_seq=168886 receive_seq=168886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.294 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2694039 sysload=0.04 cputime=397.771 memavail=1625988 print_time=8100.274 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.475
Stats 8090.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6408756 bytes_read=2846715 bytes_retransmit=9 bytes_invalid=0 send_seq=168925 receive_seq=168925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.314 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2695456 sysload=0.04 cputime=397.856 memavail=1626272 print_time=8101.122 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.2 pwm=0.421
Stats 8091.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6411383 bytes_read=2847296 bytes_retransmit=9 bytes_invalid=0 send_seq=168978 receive_seq=168978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.376 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2697398 sysload=0.03 cputime=397.943 memavail=1626492 print_time=8102.340 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.2 pwm=0.376
Stats 8092.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6413193 bytes_read=2847773 bytes_retransmit=9 bytes_invalid=0 send_seq=169016 receive_seq=169016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=54.9 pwm=0.489 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2698472 sysload=0.03 cputime=398.025 memavail=1626716 print_time=8103.243 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 8093.4: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6415266 bytes_read=2848280 bytes_retransmit=9 bytes_invalid=0 send_seq=169057 receive_seq=169057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=2700085 sysload=0.03 cputime=398.110 memavail=1627252 print_time=8104.548 buffer_time=2.448 print_stall=0 extruder: target=215 temp=215.1 pwm=0.456
Stats 8094.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6417024 bytes_read=2848802 bytes_retransmit=9 bytes_invalid=0 send_seq=169095 receive_seq=169095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.171 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2701343 sysload=0.03 cputime=398.190 memavail=1627004 print_time=8105.156 buffer_time=2.056 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 8095.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6418980 bytes_read=2849289 bytes_retransmit=9 bytes_invalid=0 send_seq=169135 receive_seq=169135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2703236 sysload=0.03 cputime=398.276 memavail=1627004 print_time=8106.213 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 8096.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6420377 bytes_read=2849746 bytes_retransmit=9 bytes_invalid=0 send_seq=169166 receive_seq=169166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.082 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2704408 sysload=0.03 cputime=398.339 memavail=1627248 print_time=8107.316 buffer_time=2.215 print_stall=0 extruder: target=215 temp=214.9 pwm=0.526
Stats 8097.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6422188 bytes_read=2850252 bytes_retransmit=9 bytes_invalid=0 send_seq=169204 receive_seq=169204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2706189 sysload=0.03 cputime=398.404 memavail=1626992 print_time=8108.260 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 8098.4: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6424655 bytes_read=2850784 bytes_retransmit=9 bytes_invalid=0 send_seq=169253 receive_seq=169253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.220 rpi: temp=56.5 mcu_temp: temp=43.9 sd_pos=2708530 sysload=0.03 cputime=398.498 memavail=1626808 print_time=8109.361 buffer_time=2.260 print_stall=0 extruder: target=215 temp=214.9 pwm=0.541
Stats 8099.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6426618 bytes_read=2851301 bytes_retransmit=9 bytes_invalid=0 send_seq=169293 receive_seq=169293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2710847 sysload=0.03 cputime=398.580 memavail=1626808 print_time=8110.147 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 8100.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6428791 bytes_read=2851832 bytes_retransmit=9 bytes_invalid=0 send_seq=169336 receive_seq=169336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=54.9 pwm=0.535 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2712653 sysload=0.03 cputime=398.644 memavail=1626808 print_time=8111.178 buffer_time=2.074 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 8101.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6430085 bytes_read=2852274 bytes_retransmit=9 bytes_invalid=0 send_seq=169367 receive_seq=169367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2713544 sysload=0.03 cputime=398.708 memavail=1626804 print_time=8112.158 buffer_time=2.054 print_stall=0 extruder: target=215 temp=215.1 pwm=0.385
Stats 8102.4: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6432781 bytes_read=2852836 bytes_retransmit=9 bytes_invalid=0 send_seq=169419 receive_seq=169419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=54.9 pwm=0.587 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2716135 sysload=0.03 cputime=398.810 memavail=1626808 print_time=8113.201 buffer_time=2.095 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 8103.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=6434669 bytes_read=2853341 bytes_retransmit=9 bytes_invalid=0 send_seq=169458 receive_seq=169458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=2719243 sysload=0.03 cputime=398.911 memavail=1626808 print_time=8114.258 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.8 pwm=0.584
Stats 8104.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6437708 bytes_read=2853924 bytes_retransmit=9 bytes_invalid=0 send_seq=169516 receive_seq=169516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.013 rpi: temp=57.9 mcu_temp: temp=44.3 sd_pos=2721886 sysload=0.03 cputime=399.010 memavail=1626564 print_time=8115.377 buffer_time=2.268 print_stall=0 extruder: target=215 temp=214.9 pwm=0.542
Stats 8105.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6439495 bytes_read=2854419 bytes_retransmit=9 bytes_invalid=0 send_seq=169554 receive_seq=169554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.088 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2724067 sysload=0.03 cputime=399.111 memavail=1626876 print_time=8116.486 buffer_time=2.377 print_stall=0 extruder: target=215 temp=214.9 pwm=0.529
Stats 8106.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6441953 bytes_read=2854969 bytes_retransmit=9 bytes_invalid=0 send_seq=169604 receive_seq=169604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.049 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=2725215 sysload=0.03 cputime=399.198 memavail=1626876 print_time=8117.263 buffer_time=2.154 print_stall=0 extruder: target=215 temp=214.9 pwm=0.436
Stats 8107.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6443491 bytes_read=2855421 bytes_retransmit=9 bytes_invalid=0 send_seq=169637 receive_seq=169637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.563 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2727231 sysload=0.03 cputime=399.283 memavail=1626816 print_time=8118.285 buffer_time=2.175 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 8108.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6445072 bytes_read=2855908 bytes_retransmit=9 bytes_invalid=0 send_seq=169671 receive_seq=169671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.337 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2728621 sysload=0.03 cputime=399.363 memavail=1626572 print_time=8119.127 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.0 pwm=0.439
Stats 8109.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6445831 bytes_read=2856340 bytes_retransmit=9 bytes_invalid=0 send_seq=169694 receive_seq=169694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.274 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2728945 sysload=0.03 cputime=399.428 memavail=1626312 print_time=8120.117 buffer_time=2.005 print_stall=0 extruder: target=215 temp=214.7 pwm=0.594
Stats 8110.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6447496 bytes_read=2856807 bytes_retransmit=9 bytes_invalid=0 send_seq=169730 receive_seq=169730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=54.9 pwm=0.564 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2730662 sysload=0.03 cputime=399.520 memavail=1626192 print_time=8121.388 buffer_time=2.276 print_stall=0 extruder: target=215 temp=214.8 pwm=0.513
Stats 8111.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6448765 bytes_read=2857274 bytes_retransmit=9 bytes_invalid=0 send_seq=169760 receive_seq=169760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.165 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2731638 sysload=0.02 cputime=399.596 memavail=1626648 print_time=8122.468 buffer_time=2.355 print_stall=0 extruder: target=215 temp=214.8 pwm=0.510
Stats 8112.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6449442 bytes_read=2857670 bytes_retransmit=9 bytes_invalid=0 send_seq=169779 receive_seq=169779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.599 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2732005 sysload=0.02 cputime=399.652 memavail=1626768 print_time=8123.196 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 8113.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6451524 bytes_read=2858172 bytes_retransmit=9 bytes_invalid=0 send_seq=169822 receive_seq=169822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2734785 sysload=0.02 cputime=399.731 memavail=1626700 print_time=8124.246 buffer_time=2.132 print_stall=0 extruder: target=215 temp=214.8 pwm=0.525
Stats 8114.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=6453585 bytes_read=2858709 bytes_retransmit=9 bytes_invalid=0 send_seq=169863 receive_seq=169863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2736440 sysload=0.02 cputime=399.817 memavail=1626728 print_time=8125.163 buffer_time=2.048 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 8115.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=6455635 bytes_read=2859225 bytes_retransmit=9 bytes_invalid=0 send_seq=169906 receive_seq=169906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.319 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2736972 sysload=0.02 cputime=399.887 memavail=1626224 print_time=8126.343 buffer_time=2.229 print_stall=0 extruder: target=215 temp=214.9 pwm=0.500
Stats 8116.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=6458375 bytes_read=2859772 bytes_retransmit=9 bytes_invalid=0 send_seq=169958 receive_seq=169958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.198 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2738371 sysload=0.02 cputime=399.950 memavail=1626484 print_time=8127.495 buffer_time=2.380 print_stall=0 extruder: target=215 temp=215.0 pwm=0.500
Stats 8117.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=6461191 bytes_read=2860364 bytes_retransmit=9 bytes_invalid=0 send_seq=170013 receive_seq=170013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.381 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2740674 sysload=0.02 cputime=400.031 memavail=1626808 print_time=8128.434 buffer_time=2.318 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 8118.5: gcodein=0 mcu: mcu_awake=0.016 mcu_task_avg=0.000023 mcu_task_stddev=0.000048 bytes_write=6463444 bytes_read=2860895 bytes_retransmit=9 bytes_invalid=0 send_seq=170059 receive_seq=170059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.4 sd_pos=2742028 sysload=0.02 cputime=400.107 memavail=1626800 print_time=8129.177 buffer_time=2.060 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 8119.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=6466235 bytes_read=2861468 bytes_retransmit=9 bytes_invalid=0 send_seq=170113 receive_seq=170113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2743408 sysload=0.02 cputime=400.191 memavail=1626488 print_time=8130.448 buffer_time=2.330 print_stall=0 extruder: target=215 temp=215.0 pwm=0.402
Stats 8120.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=6467442 bytes_read=2861930 bytes_retransmit=9 bytes_invalid=0 send_seq=170142 receive_seq=170142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.380 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2743717 sysload=0.02 cputime=400.254 memavail=1626488 print_time=8131.229 buffer_time=2.110 print_stall=0 extruder: target=215 temp=214.8 pwm=0.615
Stats 8121.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=6468814 bytes_read=2862386 bytes_retransmit=9 bytes_invalid=0 send_seq=170173 receive_seq=170173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.111 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2744003 sysload=0.02 cputime=400.316 memavail=1626496 print_time=8132.367 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.1 pwm=0.337
Stats 8122.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=6469639 bytes_read=2862793 bytes_retransmit=9 bytes_invalid=0 send_seq=170197 receive_seq=170197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.435 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2744184 sysload=0.02 cputime=400.378 memavail=1626496 print_time=8133.119 buffer_time=1.999 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 8123.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000047 bytes_write=6472065 bytes_read=2863355 bytes_retransmit=9 bytes_invalid=0 send_seq=170246 receive_seq=170246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.193 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2744916 sysload=0.02 cputime=400.440 memavail=1626496 print_time=8134.415 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 8124.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=6473930 bytes_read=2863871 bytes_retransmit=9 bytes_invalid=0 send_seq=170286 receive_seq=170286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.210 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2745452 sysload=0.02 cputime=400.491 memavail=1626244 print_time=8135.435 buffer_time=2.314 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 8125.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=6475090 bytes_read=2864293 bytes_retransmit=9 bytes_invalid=0 send_seq=170313 receive_seq=170313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=2745718 sysload=0.02 cputime=400.549 memavail=1626248 print_time=8136.171 buffer_time=2.050 print_stall=0 extruder: target=215 temp=214.9 pwm=0.519
Stats 8126.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=6477409 bytes_read=2864835 bytes_retransmit=9 bytes_invalid=0 send_seq=170358 receive_seq=170358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.451 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=2747081 sysload=0.02 cputime=400.624 memavail=1626556 print_time=8137.171 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.436
Stats 8127.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=6479950 bytes_read=2865386 bytes_retransmit=9 bytes_invalid=0 send_seq=170408 receive_seq=170408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.052 rpi: temp=57.9 mcu_temp: temp=44.3 sd_pos=2749025 sysload=0.02 cputime=400.711 memavail=1626304 print_time=8138.208 buffer_time=2.085 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 8128.5: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000047 bytes_write=6482939 bytes_read=2865968 bytes_retransmit=9 bytes_invalid=0 send_seq=170467 receive_seq=170467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2750565 sysload=0.02 cputime=400.797 memavail=1626328 print_time=8139.423 buffer_time=2.300 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 8129.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6484698 bytes_read=2866491 bytes_retransmit=9 bytes_invalid=0 send_seq=170505 receive_seq=170505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.295 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=2751176 sysload=0.02 cputime=400.863 memavail=1626556 print_time=8140.123 buffer_time=2.000 print_stall=0 extruder: target=215 temp=214.8 pwm=0.491
Stats 8130.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6487238 bytes_read=2867052 bytes_retransmit=9 bytes_invalid=0 send_seq=170557 receive_seq=170557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.1 pwm=0.177 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2753010 sysload=0.02 cputime=400.954 memavail=1626556 print_time=8141.309 buffer_time=2.184 print_stall=0 extruder: target=215 temp=214.8 pwm=0.543
Stats 8131.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6488895 bytes_read=2867519 bytes_retransmit=9 bytes_invalid=0 send_seq=170593 receive_seq=170593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.472 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2754430 sysload=0.02 cputime=401.030 memavail=1626616 print_time=8142.179 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.449
Stats 8132.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6490984 bytes_read=2868051 bytes_retransmit=9 bytes_invalid=0 send_seq=170636 receive_seq=170636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2755474 sysload=0.02 cputime=401.113 memavail=1626876 print_time=8143.332 buffer_time=2.205 print_stall=0 extruder: target=215 temp=214.9 pwm=0.490
Stats 8133.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6492973 bytes_read=2868562 bytes_retransmit=9 bytes_invalid=0 send_seq=170678 receive_seq=170678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.293 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2757083 sysload=0.02 cputime=401.196 memavail=1627120 print_time=8144.162 buffer_time=2.035 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 8134.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6495001 bytes_read=2869075 bytes_retransmit=9 bytes_invalid=0 send_seq=170720 receive_seq=170720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2758654 sysload=0.02 cputime=401.272 memavail=1627140 print_time=8145.166 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.2 pwm=0.404
Stats 8135.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6496762 bytes_read=2869587 bytes_retransmit=9 bytes_invalid=0 send_seq=170759 receive_seq=170759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2760386 sysload=0.02 cputime=401.337 memavail=1626888 print_time=8146.152 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.2 pwm=0.389
Stats 8136.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6499036 bytes_read=2870128 bytes_retransmit=9 bytes_invalid=0 send_seq=170807 receive_seq=170807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.109 rpi: temp=56.5 mcu_temp: temp=43.8 sd_pos=2762589 sysload=0.01 cputime=401.423 memavail=1627144 print_time=8147.225 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.2 pwm=0.411
Stats 8137.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6500558 bytes_read=2870585 bytes_retransmit=9 bytes_invalid=0 send_seq=170841 receive_seq=170841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.348 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2763986 sysload=0.01 cputime=401.487 memavail=1627144 print_time=8148.249 buffer_time=2.119 print_stall=0 extruder: target=215 temp=215.1 pwm=0.458
Stats 8138.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6502294 bytes_read=2871102 bytes_retransmit=9 bytes_invalid=0 send_seq=170881 receive_seq=170881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2765202 sysload=0.01 cputime=401.574 memavail=1626892 print_time=8149.202 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 8139.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=6504922 bytes_read=2871674 bytes_retransmit=9 bytes_invalid=0 send_seq=170932 receive_seq=170932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.360 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2767575 sysload=0.01 cputime=401.667 memavail=1626832 print_time=8150.319 buffer_time=2.187 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 8140.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=6507267 bytes_read=2872201 bytes_retransmit=9 bytes_invalid=0 send_seq=170980 receive_seq=170980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2770632 sysload=0.01 cputime=401.775 memavail=1626836 print_time=8151.376 buffer_time=2.244 print_stall=0 extruder: target=215 temp=215.0 pwm=0.548
Stats 8141.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=6509405 bytes_read=2872743 bytes_retransmit=9 bytes_invalid=0 send_seq=171025 receive_seq=171025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=2772262 sysload=0.01 cputime=401.864 memavail=1627096 print_time=8152.453 buffer_time=2.320 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 8142.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=6510669 bytes_read=2873204 bytes_retransmit=9 bytes_invalid=0 send_seq=171057 receive_seq=171057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.236 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2773355 sysload=0.01 cputime=401.940 memavail=1627096 print_time=8153.331 buffer_time=2.198 print_stall=0 extruder: target=215 temp=215.0 pwm=0.508
Stats 8143.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000061 bytes_write=6513245 bytes_read=2873701 bytes_retransmit=9 bytes_invalid=0 send_seq=171106 receive_seq=171099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2775818 sysload=0.01 cputime=402.041 memavail=1627096 print_time=8154.371 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 8144.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=6514785 bytes_read=2874244 bytes_retransmit=9 bytes_invalid=0 send_seq=171141 receive_seq=171141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.007 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2778015 sysload=0.01 cputime=402.133 memavail=1626844 print_time=8155.166 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.1 pwm=0.421
Stats 8145.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=6517536 bytes_read=2874810 bytes_retransmit=9 bytes_invalid=0 send_seq=171194 receive_seq=171194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.466 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=2780683 sysload=0.01 cputime=402.246 memavail=1627096 print_time=8156.255 buffer_time=2.117 print_stall=0 extruder: target=215 temp=215.1 pwm=0.484
Stats 8146.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=6519359 bytes_read=2875287 bytes_retransmit=9 bytes_invalid=0 send_seq=171232 receive_seq=171232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=2782959 sysload=0.01 cputime=402.321 memavail=1626540 print_time=8157.234 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 8147.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=6521715 bytes_read=2875849 bytes_retransmit=9 bytes_invalid=0 send_seq=171281 receive_seq=171281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.158 rpi: temp=57.5 mcu_temp: temp=44.2 sd_pos=2784386 sysload=0.01 cputime=402.382 memavail=1626540 print_time=8158.160 buffer_time=2.020 print_stall=0 extruder: target=215 temp=214.9 pwm=0.511
Stats 8148.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000055 bytes_write=6523240 bytes_read=2876330 bytes_retransmit=9 bytes_invalid=0 send_seq=171317 receive_seq=171317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.172 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2786489 sysload=0.01 cputime=402.473 memavail=1626796 print_time=8159.225 buffer_time=2.085 print_stall=0 extruder: target=215 temp=215.1 pwm=0.363
Stats 8149.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6525175 bytes_read=2876843 bytes_retransmit=9 bytes_invalid=0 send_seq=171359 receive_seq=171359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.256 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2788028 sysload=0.01 cputime=402.557 memavail=1626796 print_time=8160.373 buffer_time=2.232 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 8150.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6525925 bytes_read=2877260 bytes_retransmit=9 bytes_invalid=0 send_seq=171379 receive_seq=171379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.339 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2788383 sysload=0.01 cputime=402.621 memavail=1627048 print_time=8161.433 buffer_time=2.293 print_stall=0 extruder: target=215 temp=215.0 pwm=0.463
Stats 8151.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6527345 bytes_read=2877721 bytes_retransmit=9 bytes_invalid=0 send_seq=171411 receive_seq=171411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2789645 sysload=0.01 cputime=402.700 memavail=1626804 print_time=8162.218 buffer_time=2.077 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 8152.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6528672 bytes_read=2878168 bytes_retransmit=9 bytes_invalid=0 send_seq=171443 receive_seq=171443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.192 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=2790838 sysload=0.01 cputime=402.772 memavail=1626864 print_time=8163.285 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.0 pwm=0.447
Stats 8153.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6529737 bytes_read=2878630 bytes_retransmit=9 bytes_invalid=0 send_seq=171472 receive_seq=171472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.415 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2791884 sysload=0.01 cputime=402.848 memavail=1626612 print_time=8164.287 buffer_time=2.144 print_stall=0 extruder: target=215 temp=214.9 pwm=0.596
Stats 8154.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=6531771 bytes_read=2879161 bytes_retransmit=9 bytes_invalid=0 send_seq=171515 receive_seq=171515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.127 rpi: temp=56.5 mcu_temp: temp=43.8 sd_pos=2794895 sysload=0.01 cputime=402.946 memavail=1627116 print_time=8165.354 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 8155.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=6534873 bytes_read=2879753 bytes_retransmit=9 bytes_invalid=0 send_seq=171576 receive_seq=171576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.375 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2797047 sysload=0.01 cputime=403.038 memavail=1626868 print_time=8166.365 buffer_time=2.221 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 8156.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=6537281 bytes_read=2880325 bytes_retransmit=9 bytes_invalid=0 send_seq=171627 receive_seq=171627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=2798380 sysload=0.01 cputime=403.112 memavail=1626856 print_time=8167.147 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.2 pwm=0.340
Stats 8157.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=6538927 bytes_read=2880811 bytes_retransmit=9 bytes_invalid=0 send_seq=171664 receive_seq=171664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=56.5 mcu_temp: temp=43.3 sd_pos=2798809 sysload=0.01 cputime=403.179 memavail=1626608 print_time=8168.156 buffer_time=2.011 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 8158.5: gcodein=0 mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000051 bytes_write=6540780 bytes_read=2881288 bytes_retransmit=9 bytes_invalid=0 send_seq=171702 receive_seq=171702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.256 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2799387 sysload=0.01 cputime=403.244 memavail=1626860 print_time=8169.174 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 8159.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6542912 bytes_read=2881846 bytes_retransmit=9 bytes_invalid=0 send_seq=171747 receive_seq=171747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.215 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2799971 sysload=0.01 cputime=403.313 memavail=1626608 print_time=8170.388 buffer_time=2.241 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 8160.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6544924 bytes_read=2882367 bytes_retransmit=9 bytes_invalid=0 send_seq=171791 receive_seq=171791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.343 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2800433 sysload=0.01 cputime=403.378 memavail=1626548 print_time=8171.413 buffer_time=2.266 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 8161.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6546439 bytes_read=2882829 bytes_retransmit=9 bytes_invalid=0 send_seq=171826 receive_seq=171826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.270 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2800907 sysload=0.01 cputime=403.434 memavail=1626516 print_time=8172.290 buffer_time=2.142 print_stall=0 extruder: target=215 temp=215.0 pwm=0.506
Stats 8162.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6547901 bytes_read=2883316 bytes_retransmit=9 bytes_invalid=0 send_seq=171860 receive_seq=171860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.309 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2801267 sysload=0.01 cputime=403.487 memavail=1626472 print_time=8173.238 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 8163.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6550922 bytes_read=2883917 bytes_retransmit=9 bytes_invalid=0 send_seq=171922 receive_seq=171922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.178 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2804054 sysload=0.01 cputime=403.588 memavail=1626556 print_time=8174.307 buffer_time=2.159 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 8164.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=6552772 bytes_read=2884410 bytes_retransmit=9 bytes_invalid=0 send_seq=171962 receive_seq=171962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.457 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2804473 sysload=0.01 cputime=403.653 memavail=1626828 print_time=8175.340 buffer_time=2.190 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 8165.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=6556110 bytes_read=2885035 bytes_retransmit=9 bytes_invalid=0 send_seq=172026 receive_seq=172026 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.326 rpi: temp=57.9 mcu_temp: temp=44.0 sd_pos=2806127 sysload=0.01 cputime=403.743 memavail=1626524 print_time=8176.636 buffer_time=2.486 print_stall=0 extruder: target=215 temp=214.7 pwm=0.645
Stats 8166.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=6557775 bytes_read=2885518 bytes_retransmit=9 bytes_invalid=0 send_seq=172064 receive_seq=172064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.1 pwm=0.137 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2806993 sysload=0.01 cputime=403.804 memavail=1625760 print_time=8177.196 buffer_time=2.044 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 8167.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=6560760 bytes_read=2886115 bytes_retransmit=9 bytes_invalid=0 send_seq=172124 receive_seq=172124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.428 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2809048 sysload=0.01 cputime=403.870 memavail=1626064 print_time=8178.343 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.9 pwm=0.464
Stats 8168.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=6562901 bytes_read=2886662 bytes_retransmit=9 bytes_invalid=0 send_seq=172170 receive_seq=172170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.503 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2810098 sysload=0.01 cputime=403.945 memavail=1625552 print_time=8179.297 buffer_time=2.145 print_stall=0 extruder: target=215 temp=214.9 pwm=0.462
Stats 8169.5: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000057 bytes_write=6565110 bytes_read=2887209 bytes_retransmit=9 bytes_invalid=0 send_seq=172216 receive_seq=172216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.234 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2811447 sysload=0.01 cputime=404.028 memavail=1625820 print_time=8180.252 buffer_time=2.099 print_stall=0 extruder: target=215 temp=214.9 pwm=0.517
Stats 8170.5: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000057 bytes_write=6567190 bytes_read=2887726 bytes_retransmit=9 bytes_invalid=0 send_seq=172262 receive_seq=172262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.144 rpi: temp=57.5 mcu_temp: temp=44.1 sd_pos=2813291 sysload=0.01 cputime=404.114 memavail=1625828 print_time=8181.526 buffer_time=2.362 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 8171.5: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000057 bytes_write=6569534 bytes_read=2888293 bytes_retransmit=9 bytes_invalid=0 send_seq=172312 receive_seq=172312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.2 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2815212 sysload=0.01 cputime=404.198 memavail=1625824 print_time=8182.397 buffer_time=2.234 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 8172.5: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000057 bytes_write=6570720 bytes_read=2888739 bytes_retransmit=9 bytes_invalid=0 send_seq=172341 receive_seq=172341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=2815836 sysload=0.01 cputime=404.262 memavail=1625824 print_time=8183.172 buffer_time=2.007 print_stall=0 extruder: target=215 temp=214.9 pwm=0.531
Stats 8173.5: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000057 bytes_write=6573400 bytes_read=2889291 bytes_retransmit=9 bytes_invalid=0 send_seq=172394 receive_seq=172394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.077 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2817795 sysload=0.01 cputime=404.348 memavail=1625564 print_time=8184.413 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.1 pwm=0.389
Stats 8174.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6574834 bytes_read=2889794 bytes_retransmit=9 bytes_invalid=0 send_seq=172428 receive_seq=172428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.310 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2819166 sysload=0.01 cputime=404.429 memavail=1625824 print_time=8185.206 buffer_time=2.040 print_stall=0 extruder: target=215 temp=215.1 pwm=0.417
Stats 8175.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6576302 bytes_read=2890255 bytes_retransmit=9 bytes_invalid=0 send_seq=172460 receive_seq=172460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2820451 sysload=0.01 cputime=404.507 memavail=1625764 print_time=8186.288 buffer_time=2.122 print_stall=0 extruder: target=215 temp=215.1 pwm=0.463
Stats 8176.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6578321 bytes_read=2890752 bytes_retransmit=9 bytes_invalid=0 send_seq=172502 receive_seq=172502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2822237 sysload=0.01 cputime=404.589 memavail=1625772 print_time=8187.195 buffer_time=2.028 print_stall=0 extruder: target=215 temp=215.1 pwm=0.463
Stats 8177.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6580631 bytes_read=2891318 bytes_retransmit=9 bytes_invalid=0 send_seq=172549 receive_seq=172549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2824646 sysload=0.01 cputime=404.683 memavail=1625764 print_time=8188.298 buffer_time=2.130 print_stall=0 extruder: target=215 temp=215.0 pwm=0.574
Stats 8178.5: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6582810 bytes_read=2891835 bytes_retransmit=9 bytes_invalid=0 send_seq=172595 receive_seq=172595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2827315 sysload=0.01 cputime=404.777 memavail=1625780 print_time=8189.309 buffer_time=2.140 print_stall=0 extruder: target=215 temp=215.1 pwm=0.439
Stats 8179.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6584739 bytes_read=2892342 bytes_retransmit=9 bytes_invalid=0 send_seq=172636 receive_seq=172636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.119 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2828737 sysload=0.01 cputime=404.862 memavail=1625780 print_time=8190.377 buffer_time=2.208 print_stall=0 extruder: target=215 temp=215.0 pwm=0.571
Stats 8180.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6586293 bytes_read=2892863 bytes_retransmit=9 bytes_invalid=0 send_seq=172674 receive_seq=172674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.218 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=2830413 sysload=0.01 cputime=404.945 memavail=1626004 print_time=8191.234 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.2 pwm=0.345
Stats 8181.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6588976 bytes_read=2893420 bytes_retransmit=9 bytes_invalid=0 send_seq=172728 receive_seq=172728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.336 rpi: temp=56.5 mcu_temp: temp=43.7 sd_pos=2832510 sysload=0.01 cputime=405.038 memavail=1625664 print_time=8192.295 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.522
Stats 8182.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6590763 bytes_read=2893887 bytes_retransmit=9 bytes_invalid=0 send_seq=172764 receive_seq=172764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2835486 sysload=0.01 cputime=405.136 memavail=1625664 print_time=8193.326 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.1 pwm=0.428
Stats 8183.5: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000027 mcu_task_stddev=0.000052 bytes_write=6593787 bytes_read=2894523 bytes_retransmit=9 bytes_invalid=0 send_seq=172825 receive_seq=172825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.187 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2838094 sysload=0.01 cputime=405.235 memavail=1625664 print_time=8194.447 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.1 pwm=0.426
Stats 8184.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=6595604 bytes_read=2894991 bytes_retransmit=9 bytes_invalid=0 send_seq=172865 receive_seq=172858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.075 rpi: temp=56.5 mcu_temp: temp=43.6 sd_pos=2840253 sysload=0.01 cputime=405.328 memavail=1625412 print_time=8195.556 buffer_time=2.384 print_stall=0 extruder: target=215 temp=214.8 pwm=0.598
Stats 8185.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=6597814 bytes_read=2895548 bytes_retransmit=9 bytes_invalid=0 send_seq=172912 receive_seq=172912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.1 pwm=0.026 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2841445 sysload=0.01 cputime=405.406 memavail=1625672 print_time=8196.340 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 8186.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=6599329 bytes_read=2896049 bytes_retransmit=9 bytes_invalid=0 send_seq=172946 receive_seq=172946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.243 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2843456 sysload=0.01 cputime=405.476 memavail=1626180 print_time=8197.361 buffer_time=2.188 print_stall=0 extruder: target=215 temp=214.9 pwm=0.488
Stats 8187.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=6601410 bytes_read=2896561 bytes_retransmit=9 bytes_invalid=0 send_seq=172991 receive_seq=172991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996326 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2844846 sysload=0.00 cputime=405.537 memavail=1625932 print_time=8198.509 buffer_time=2.335 print_stall=0 extruder: target=215 temp=214.9 pwm=0.505
Stats 8188.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000053 bytes_write=6602399 bytes_read=2896973 bytes_retransmit=9 bytes_invalid=0 send_seq=173016 receive_seq=173016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=54.8 pwm=0.785 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2845679 sysload=0.00 cputime=405.592 memavail=1625680 print_time=8199.422 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.0 pwm=0.435
Stats 8189.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=6604208 bytes_read=2897509 bytes_retransmit=9 bytes_invalid=0 send_seq=173054 receive_seq=173054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=2847203 sysload=0.00 cputime=405.660 memavail=1625688 print_time=8200.193 buffer_time=2.019 print_stall=0 extruder: target=215 temp=214.8 pwm=0.559
Stats 8190.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=6605111 bytes_read=2897921 bytes_retransmit=9 bytes_invalid=0 send_seq=173079 receive_seq=173079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2847689 sysload=0.00 cputime=405.725 memavail=1625688 print_time=8201.343 buffer_time=2.168 print_stall=0 extruder: target=215 temp=214.9 pwm=0.429
Stats 8191.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=6606613 bytes_read=2898383 bytes_retransmit=9 bytes_invalid=0 send_seq=173114 receive_seq=173114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.128 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2849900 sysload=0.00 cputime=405.811 memavail=1625932 print_time=8202.294 buffer_time=2.118 print_stall=0 extruder: target=215 temp=214.8 pwm=0.572
Stats 8192.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=6608868 bytes_read=2898944 bytes_retransmit=9 bytes_invalid=0 send_seq=173160 receive_seq=173160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.161 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2852699 sysload=0.00 cputime=405.908 memavail=1625948 print_time=8203.460 buffer_time=2.283 print_stall=0 extruder: target=215 temp=214.8 pwm=0.581
Stats 8193.5: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=6611799 bytes_read=2899531 bytes_retransmit=9 bytes_invalid=0 send_seq=173220 receive_seq=173220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2854261 sysload=0.00 cputime=405.990 memavail=1625948 print_time=8204.582 buffer_time=2.405 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 8194.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=6614397 bytes_read=2900114 bytes_retransmit=9 bytes_invalid=0 send_seq=173273 receive_seq=173273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.119 rpi: temp=57.0 mcu_temp: temp=44.0 sd_pos=2856696 sysload=0.00 cputime=406.082 memavail=1626200 print_time=8205.453 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 8195.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=6617050 bytes_read=2900705 bytes_retransmit=9 bytes_invalid=0 send_seq=173328 receive_seq=173328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.312 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2858497 sysload=0.00 cputime=406.165 memavail=1626204 print_time=8206.239 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.1 pwm=0.505
Stats 8196.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=6619054 bytes_read=2901197 bytes_retransmit=9 bytes_invalid=0 send_seq=173369 receive_seq=173369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.117 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2859107 sysload=0.00 cputime=406.232 memavail=1626572 print_time=8207.337 buffer_time=2.158 print_stall=0 extruder: target=215 temp=215.0 pwm=0.505
Stats 8197.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=6620301 bytes_read=2901654 bytes_retransmit=9 bytes_invalid=0 send_seq=173400 receive_seq=173400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.209 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=2859415 sysload=0.00 cputime=406.301 memavail=1626320 print_time=8208.460 buffer_time=2.281 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 8198.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000057 bytes_write=6622492 bytes_read=2902205 bytes_retransmit=9 bytes_invalid=0 send_seq=173447 receive_seq=173447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.308 rpi: temp=56.5 mcu_temp: temp=43.5 sd_pos=2859929 sysload=0.00 cputime=406.372 memavail=1626564 print_time=8209.279 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.2 pwm=0.401
Stats 8199.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6624347 bytes_read=2902713 bytes_retransmit=9 bytes_invalid=0 send_seq=173488 receive_seq=173488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.671 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2860461 sysload=0.00 cputime=406.440 memavail=1626320 print_time=8210.310 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.1 pwm=0.506
Stats 8200.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6626494 bytes_read=2903180 bytes_retransmit=9 bytes_invalid=0 send_seq=173533 receive_seq=173521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=245 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.027 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=2862120 sysload=0.00 cputime=406.525 memavail=1626572 print_time=8211.557 buffer_time=2.362 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 8201.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6629750 bytes_read=2903871 bytes_retransmit=9 bytes_invalid=0 send_seq=173596 receive_seq=173596 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=57.0 mcu_temp: temp=43.5 sd_pos=2864460 sysload=0.00 cputime=406.629 memavail=1626320 print_time=8212.516 buffer_time=2.321 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 8202.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6631853 bytes_read=2904383 bytes_retransmit=9 bytes_invalid=0 send_seq=173641 receive_seq=173641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.2 sd_pos=2865413 sysload=0.00 cputime=406.702 memavail=1626324 print_time=8213.259 buffer_time=2.062 print_stall=0 extruder: target=215 temp=215.2 pwm=0.378
Stats 8203.5: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=6634721 bytes_read=2904970 bytes_retransmit=9 bytes_invalid=0 send_seq=173698 receive_seq=173698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.235 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2867392 sysload=0.00 cputime=406.791 memavail=1626576 print_time=8214.272 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.0 pwm=0.553
Stats 8204.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=6637052 bytes_read=2905542 bytes_retransmit=9 bytes_invalid=0 send_seq=173746 receive_seq=173746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=54.9 pwm=0.414 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2868383 sysload=0.00 cputime=406.866 memavail=1626316 print_time=8215.229 buffer_time=2.031 print_stall=0 extruder: target=215 temp=215.2 pwm=0.422
Stats 8205.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=6639476 bytes_read=2906079 bytes_retransmit=9 bytes_invalid=0 send_seq=173796 receive_seq=173796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.440 rpi: temp=57.9 mcu_temp: temp=44.2 sd_pos=2869863 sysload=0.00 cputime=406.947 memavail=1626028 print_time=8216.215 buffer_time=2.017 print_stall=0 extruder: target=215 temp=215.1 pwm=0.498
Stats 8206.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=6641901 bytes_read=2906631 bytes_retransmit=9 bytes_invalid=0 send_seq=173846 receive_seq=173846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.618 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2871809 sysload=0.00 cputime=407.019 memavail=1626280 print_time=8217.376 buffer_time=2.177 print_stall=0 extruder: target=215 temp=215.1 pwm=0.394
Stats 8207.5: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000048 bytes_write=6643706 bytes_read=2907147 bytes_retransmit=9 bytes_invalid=0 send_seq=173886 receive_seq=173886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=56.5 mcu_temp: temp=43.7 sd_pos=2873233 sysload=0.00 cputime=407.085 memavail=1625968 print_time=8218.486 buffer_time=2.286 print_stall=0 extruder: target=215 temp=215.0 pwm=0.504
Stats 8208.5: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6646018 bytes_read=2907685 bytes_retransmit=9 bytes_invalid=0 send_seq=173933 receive_seq=173933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=56.5 mcu_temp: temp=44.0 sd_pos=2874800 sysload=0.00 cputime=407.173 memavail=1625968 print_time=8219.374 buffer_time=2.173 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 8209.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6648260 bytes_read=2908217 bytes_retransmit=9 bytes_invalid=0 send_seq=173979 receive_seq=173979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.181 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=2876828 sysload=0.00 cputime=407.264 memavail=1626028 print_time=8220.454 buffer_time=2.253 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 8210.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6650302 bytes_read=2908743 bytes_retransmit=9 bytes_invalid=0 send_seq=174021 receive_seq=174021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.227 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2878512 sysload=0.00 cputime=407.351 memavail=1625928 print_time=8221.298 buffer_time=2.096 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 8211.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6652415 bytes_read=2909245 bytes_retransmit=9 bytes_invalid=0 send_seq=174064 receive_seq=174064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.355 rpi: temp=57.0 mcu_temp: temp=43.9 sd_pos=2881429 sysload=0.00 cputime=407.445 memavail=1626224 print_time=8222.329 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.0 pwm=0.496
Stats 8212.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6654337 bytes_read=2909747 bytes_retransmit=9 bytes_invalid=0 send_seq=174104 receive_seq=174104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.261 rpi: temp=57.9 mcu_temp: temp=44.2 sd_pos=2882854 sysload=0.00 cputime=407.519 memavail=1625728 print_time=8223.398 buffer_time=2.195 print_stall=0 extruder: target=215 temp=215.1 pwm=0.496
Stats 8213.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6656278 bytes_read=2910283 bytes_retransmit=9 bytes_invalid=0 send_seq=174148 receive_seq=174148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.211 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2884995 sysload=0.00 cputime=407.614 memavail=1625972 print_time=8224.286 buffer_time=2.082 print_stall=0 extruder: target=215 temp=215.3 pwm=0.345
Stats 8214.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6658820 bytes_read=2910846 bytes_retransmit=9 bytes_invalid=0 send_seq=174200 receive_seq=174200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.390 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=2886581 sysload=0.00 cputime=407.698 memavail=1625920 print_time=8225.371 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.2 pwm=0.424
Stats 8215.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6660755 bytes_read=2911353 bytes_retransmit=9 bytes_invalid=0 send_seq=174241 receive_seq=174241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.071 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=2887464 sysload=0.00 cputime=407.770 memavail=1626232 print_time=8226.513 buffer_time=2.309 print_stall=0 extruder: target=215 temp=215.1 pwm=0.450
Stats 8216.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6662493 bytes_read=2911859 bytes_retransmit=9 bytes_invalid=0 send_seq=174279 receive_seq=174279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.387 rpi: temp=57.9 mcu_temp: temp=44.1 sd_pos=2888640 sysload=0.00 cputime=407.842 memavail=1626240 print_time=8227.300 buffer_time=2.095 print_stall=0 extruder: target=215 temp=215.2 pwm=0.414
Stats 8217.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6664664 bytes_read=2912381 bytes_retransmit=9 bytes_invalid=0 send_seq=174326 receive_seq=174326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.240 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=2890127 sysload=0.00 cputime=407.915 memavail=1625988 print_time=8228.240 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.1 pwm=0.534
Stats 8218.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=6666499 bytes_read=2912909 bytes_retransmit=9 bytes_invalid=0 send_seq=174365 receive_seq=174365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.048 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2892819 sysload=0.00 cputime=408.017 memavail=1626244 print_time=8229.259 buffer_time=2.050 print_stall=0 extruder: target=215 temp=215.0 pwm=0.526
Stats 8219.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=6669031 bytes_read=2913465 bytes_retransmit=9 bytes_invalid=0 send_seq=174416 receive_seq=174416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2895351 sysload=0.00 cputime=408.114 memavail=1625992 print_time=8230.311 buffer_time=2.099 print_stall=0 extruder: target=215 temp=215.1 pwm=0.479
Stats 8220.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=6670859 bytes_read=2913942 bytes_retransmit=9 bytes_invalid=0 send_seq=174454 receive_seq=174454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.105 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2897548 sysload=0.00 cputime=408.200 memavail=1625740 print_time=8231.290 buffer_time=2.078 print_stall=0 extruder: target=215 temp=215.2 pwm=0.412
Stats 8221.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=6673556 bytes_read=2914524 bytes_retransmit=9 bytes_invalid=0 send_seq=174507 receive_seq=174507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.097 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2899178 sysload=0.00 cputime=408.289 memavail=1625992 print_time=8232.295 buffer_time=2.082 print_stall=0 extruder: target=215 temp=214.9 pwm=0.607
Stats 8222.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=6675109 bytes_read=2914985 bytes_retransmit=9 bytes_invalid=0 send_seq=174540 receive_seq=174540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=71996388 heater_bed: target=55 temp=54.9 pwm=0.292 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2901092 sysload=0.00 cputime=408.376 memavail=1625996 print_time=8233.360 buffer_time=2.147 print_stall=0 extruder: target=215 temp=214.9 pwm=0.605
Stats 8223.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000062 bytes_write=6676899 bytes_read=2915452 bytes_retransmit=9 bytes_invalid=0 send_seq=174578 receive_seq=174578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=71996385 heater_bed: target=55 temp=54.9 pwm=0.439 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2902775 sysload=0.00 cputime=408.459 memavail=1625996 print_time=8234.290 buffer_time=2.075 print_stall=0 extruder: target=215 temp=215.1 pwm=0.441
Stats 8224.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6677942 bytes_read=2915898 bytes_retransmit=9 bytes_invalid=0 send_seq=174603 receive_seq=174603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996382 heater_bed: target=55 temp=54.9 pwm=0.392 rpi: temp=57.0 mcu_temp: temp=43.8 sd_pos=2903368 sysload=0.00 cputime=408.527 memavail=1625996 print_time=8235.477 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.1 pwm=0.415
Stats 8225.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6679557 bytes_read=2916363 bytes_retransmit=9 bytes_invalid=0 send_seq=174638 receive_seq=174638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996380 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=2905062 sysload=0.00 cputime=408.609 memavail=1625744 print_time=8236.282 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.1 pwm=0.452
Stats 8226.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6680610 bytes_read=2916771 bytes_retransmit=9 bytes_invalid=0 send_seq=174663 receive_seq=174663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996377 heater_bed: target=55 temp=54.9 pwm=0.308 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2905829 sysload=0.00 cputime=408.673 memavail=1626256 print_time=8237.288 buffer_time=2.070 print_stall=0 extruder: target=215 temp=215.1 pwm=0.457
Stats 8227.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6682075 bytes_read=2917269 bytes_retransmit=9 bytes_invalid=0 send_seq=174697 receive_seq=174697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=55 temp=54.9 pwm=0.399 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2907643 sysload=0.00 cputime=408.760 memavail=1626008 print_time=8238.232 buffer_time=2.015 print_stall=0 extruder: target=215 temp=215.0 pwm=0.551
Stats 8228.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6684215 bytes_read=2917790 bytes_retransmit=9 bytes_invalid=0 send_seq=174741 receive_seq=174741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2910167 sysload=0.00 cputime=408.860 memavail=1625756 print_time=8239.225 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.485
Stats 8229.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6687974 bytes_read=2918452 bytes_retransmit=9 bytes_invalid=0 send_seq=174813 receive_seq=174813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=55 temp=55.0 pwm=0.059 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2912936 sysload=0.00 cputime=408.962 memavail=1625748 print_time=8240.298 buffer_time=2.079 print_stall=0 extruder: target=215 temp=214.9 pwm=0.469
Stats 8230.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6689953 bytes_read=2918979 bytes_retransmit=9 bytes_invalid=0 send_seq=174855 receive_seq=174855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=55.0 pwm=0.032 rpi: temp=57.5 mcu_temp: temp=44.1 sd_pos=2913582 sysload=0.00 cputime=409.031 memavail=1625748 print_time=8241.258 buffer_time=2.038 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 8231.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6693581 bytes_read=2919630 bytes_retransmit=9 bytes_invalid=0 send_seq=174925 receive_seq=174925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=71996360 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.7 sd_pos=2914662 sysload=0.00 cputime=409.114 memavail=1625748 print_time=8242.628 buffer_time=2.407 print_stall=0 extruder: target=215 temp=214.7 pwm=0.557
Stats 8232.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6694837 bytes_read=2920072 bytes_retransmit=9 bytes_invalid=0 send_seq=174956 receive_seq=174956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.8 sd_pos=2914989 sysload=0.00 cputime=409.178 memavail=1625556 print_time=8243.553 buffer_time=2.331 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 8233.6: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000024 mcu_task_stddev=0.000050 bytes_write=6696242 bytes_read=2920549 bytes_retransmit=9 bytes_invalid=0 send_seq=174988 receive_seq=174988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.262 rpi: temp=58.4 mcu_temp: temp=43.9 sd_pos=2915319 sysload=0.00 cputime=409.243 memavail=1625500 print_time=8244.286 buffer_time=2.064 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 8234.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000045 bytes_write=6698186 bytes_read=2921066 bytes_retransmit=9 bytes_invalid=0 send_seq=175028 receive_seq=175028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=57.9 mcu_temp: temp=43.9 sd_pos=2916880 sysload=0.00 cputime=409.323 memavail=1626004 print_time=8245.412 buffer_time=2.189 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 8235.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000045 bytes_write=6701441 bytes_read=2921608 bytes_retransmit=9 bytes_invalid=0 send_seq=175091 receive_seq=175079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.074 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2920390 sysload=0.00 cputime=409.427 memavail=1625500 print_time=8246.607 buffer_time=2.381 print_stall=0 extruder: target=215 temp=215.0 pwm=0.465
Stats 8236.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000045 bytes_write=6703951 bytes_read=2922245 bytes_retransmit=9 bytes_invalid=0 send_seq=175143 receive_seq=175143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996357 heater_bed: target=55 temp=55.0 pwm=0.155 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2921733 sysload=0.00 cputime=409.495 memavail=1625752 print_time=8247.497 buffer_time=2.270 print_stall=0 extruder: target=215 temp=214.8 pwm=0.596
Stats 8237.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000045 bytes_write=6706655 bytes_read=2922816 bytes_retransmit=9 bytes_invalid=0 send_seq=175197 receive_seq=175197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.0 mcu_temp: temp=43.8 sd_pos=2923568 sysload=0.00 cputime=409.561 memavail=1625752 print_time=8248.488 buffer_time=2.261 print_stall=0 extruder: target=215 temp=215.0 pwm=0.467
Stats 8238.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000045 bytes_write=6708960 bytes_read=2923353 bytes_retransmit=9 bytes_invalid=0 send_seq=175247 receive_seq=175247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.010 rpi: temp=57.5 mcu_temp: temp=43.5 sd_pos=2924577 sysload=0.00 cputime=409.641 memavail=1625500 print_time=8249.438 buffer_time=2.211 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 8239.6: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000054 bytes_write=6711326 bytes_read=2923936 bytes_retransmit=9 bytes_invalid=0 send_seq=175297 receive_seq=175297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.302 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=2925991 sysload=0.00 cputime=409.728 memavail=1625684 print_time=8250.394 buffer_time=2.166 print_stall=0 extruder: target=215 temp=215.1 pwm=0.424
Stats 8240.6: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000054 bytes_write=6713228 bytes_read=2924447 bytes_retransmit=9 bytes_invalid=0 send_seq=175339 receive_seq=175339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=2927522 sysload=0.00 cputime=409.813 memavail=1625180 print_time=8251.303 buffer_time=2.074 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 8241.6: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000054 bytes_write=6715190 bytes_read=2924939 bytes_retransmit=9 bytes_invalid=0 send_seq=175380 receive_seq=175380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.413 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2928794 sysload=0.00 cputime=409.897 memavail=1625252 print_time=8252.240 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.2 pwm=0.373
Stats 8242.6: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000054 bytes_write=6718032 bytes_read=2925541 bytes_retransmit=9 bytes_invalid=0 send_seq=175437 receive_seq=175437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=54.9 pwm=0.743 rpi: temp=58.4 mcu_temp: temp=44.0 sd_pos=2930901 sysload=0.00 cputime=409.999 memavail=1625248 print_time=8253.520 buffer_time=2.290 print_stall=0 extruder: target=215 temp=215.0 pwm=0.535
Stats 8243.6: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000054 bytes_write=6719847 bytes_read=2926042 bytes_retransmit=9 bytes_invalid=0 send_seq=175477 receive_seq=175477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.065 rpi: temp=57.5 mcu_temp: temp=43.8 sd_pos=2932555 sysload=0.00 cputime=410.085 memavail=1625476 print_time=8254.385 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.1 pwm=0.437
Stats 8244.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6722423 bytes_read=2926555 bytes_retransmit=9 bytes_invalid=0 send_seq=175528 receive_seq=175519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.219 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=2934778 sysload=0.00 cputime=410.174 memavail=1625448 print_time=8255.494 buffer_time=2.257 print_stall=0 extruder: target=215 temp=215.1 pwm=0.461
Stats 8245.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6723968 bytes_read=2927092 bytes_retransmit=9 bytes_invalid=0 send_seq=175563 receive_seq=175563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.365 rpi: temp=57.9 mcu_temp: temp=43.7 sd_pos=2937038 sysload=0.00 cputime=410.265 memavail=1625440 print_time=8256.240 buffer_time=2.003 print_stall=0 extruder: target=215 temp=215.1 pwm=0.472
Stats 8246.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6725737 bytes_read=2927588 bytes_retransmit=9 bytes_invalid=0 send_seq=175602 receive_seq=175602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.523 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2938373 sysload=0.00 cputime=410.339 memavail=1626452 print_time=8257.276 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.2 pwm=0.466
Stats 8247.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6728208 bytes_read=2928130 bytes_retransmit=9 bytes_invalid=0 send_seq=175653 receive_seq=175653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.295 rpi: temp=57.5 mcu_temp: temp=44.0 sd_pos=2941017 sysload=0.08 cputime=410.414 memavail=1626608 print_time=8258.406 buffer_time=2.167 print_stall=0 extruder: target=215 temp=215.3 pwm=0.411
Stats 8248.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6731283 bytes_read=2928757 bytes_retransmit=9 bytes_invalid=0 send_seq=175715 receive_seq=175715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.013 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2942411 sysload=0.08 cputime=410.504 memavail=1627008 print_time=8259.568 buffer_time=2.328 print_stall=0 extruder: target=215 temp=215.1 pwm=0.493
Stats 8249.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6732833 bytes_read=2929244 bytes_retransmit=9 bytes_invalid=0 send_seq=175749 receive_seq=175749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.266 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2943499 sysload=0.08 cputime=410.566 memavail=1626848 print_time=8260.488 buffer_time=2.247 print_stall=0 extruder: target=215 temp=215.2 pwm=0.444
Stats 8250.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6734938 bytes_read=2929751 bytes_retransmit=9 bytes_invalid=0 send_seq=175793 receive_seq=175793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.254 rpi: temp=57.0 mcu_temp: temp=43.7 sd_pos=2944345 sysload=0.08 cputime=410.624 memavail=1626708 print_time=8261.466 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.2 pwm=0.394
Stats 8251.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6736892 bytes_read=2930258 bytes_retransmit=9 bytes_invalid=0 send_seq=175837 receive_seq=175831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.397 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2947066 sysload=0.08 cputime=410.729 memavail=1626376 print_time=8262.492 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.3 pwm=0.379
Stats 8252.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6739693 bytes_read=2930869 bytes_retransmit=9 bytes_invalid=0 send_seq=175893 receive_seq=175893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.1 pwm=0.024 rpi: temp=57.5 mcu_temp: temp=43.6 sd_pos=2949555 sysload=0.07 cputime=410.820 memavail=1626456 print_time=8263.630 buffer_time=2.379 print_stall=0 extruder: target=215 temp=215.2 pwm=0.463
Stats 8253.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000054 bytes_write=6741099 bytes_read=2931316 bytes_retransmit=9 bytes_invalid=0 send_seq=175925 receive_seq=175925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.063 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=2951275 sysload=0.07 cputime=410.893 memavail=1626392 print_time=8264.408 buffer_time=2.156 print_stall=0 extruder: target=215 temp=214.9 pwm=0.554
Stats 8254.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6743928 bytes_read=2931938 bytes_retransmit=9 bytes_invalid=0 send_seq=175983 receive_seq=175983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=54.9 pwm=0.540 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2953083 sysload=0.07 cputime=410.979 memavail=1626960 print_time=8265.580 buffer_time=2.328 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 8255.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6745141 bytes_read=2932389 bytes_retransmit=9 bytes_invalid=0 send_seq=176013 receive_seq=176013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.356 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=2954279 sysload=0.07 cputime=411.057 memavail=1626456 print_time=8266.346 buffer_time=2.093 print_stall=0 extruder: target=215 temp=214.9 pwm=0.570
Stats 8256.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6746956 bytes_read=2932876 bytes_retransmit=9 bytes_invalid=0 send_seq=176053 receive_seq=176053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=54.9 pwm=0.439 rpi: temp=58.4 mcu_temp: temp=43.7 sd_pos=2955736 sysload=0.07 cputime=411.130 memavail=1626468 print_time=8267.287 buffer_time=2.033 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 8257.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6748050 bytes_read=2933343 bytes_retransmit=9 bytes_invalid=0 send_seq=176083 receive_seq=176083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.449 rpi: temp=57.0 mcu_temp: temp=43.4 sd_pos=2956686 sysload=0.07 cputime=411.200 memavail=1626236 print_time=8268.455 buffer_time=2.201 print_stall=0 extruder: target=215 temp=214.8 pwm=0.605
Stats 8258.6: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6749807 bytes_read=2933844 bytes_retransmit=9 bytes_invalid=0 send_seq=176123 receive_seq=176123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.480 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=2958224 sysload=0.07 cputime=411.281 memavail=1625968 print_time=8269.536 buffer_time=2.281 print_stall=0 extruder: target=215 temp=214.9 pwm=0.471
Stats 8259.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6750802 bytes_read=2934271 bytes_retransmit=9 bytes_invalid=0 send_seq=176148 receive_seq=176148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.231 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=2958966 sysload=0.07 cputime=411.338 memavail=1626116 print_time=8270.434 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.8 pwm=0.528
Stats 8260.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6752387 bytes_read=2934768 bytes_retransmit=9 bytes_invalid=0 send_seq=176184 receive_seq=176184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.018 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=2961040 sysload=0.07 cputime=411.405 memavail=1625928 print_time=8271.267 buffer_time=2.011 print_stall=0 extruder: target=215 temp=215.0 pwm=0.413
Stats 8261.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6755654 bytes_read=2935404 bytes_retransmit=9 bytes_invalid=0 send_seq=176251 receive_seq=176251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.461 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=2965175 sysload=0.07 cputime=411.518 memavail=1625904 print_time=8272.537 buffer_time=2.280 print_stall=0 extruder: target=215 temp=214.9 pwm=0.499
Stats 8262.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6758556 bytes_read=2935981 bytes_retransmit=9 bytes_invalid=0 send_seq=176309 receive_seq=176309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.082 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=2967879 sysload=0.06 cputime=411.610 memavail=1625984 print_time=8273.385 buffer_time=2.127 print_stall=0 extruder: target=215 temp=214.9 pwm=0.440
Stats 8263.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000025 mcu_task_stddev=0.000049 bytes_write=6761350 bytes_read=2936578 bytes_retransmit=9 bytes_invalid=0 send_seq=176365 receive_seq=176365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.162 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=2968738 sysload=0.06 cputime=411.680 memavail=1625840 print_time=8274.526 buffer_time=2.268 print_stall=0 extruder: target=215 temp=214.8 pwm=0.516
Stats 8264.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6763232 bytes_read=2937105 bytes_retransmit=9 bytes_invalid=0 send_seq=176407 receive_seq=176407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.286 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=2969254 sysload=0.06 cputime=411.744 memavail=1625692 print_time=8275.554 buffer_time=2.295 print_stall=0 extruder: target=215 temp=215.1 pwm=0.358
Stats 8265.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6764677 bytes_read=2937567 bytes_retransmit=9 bytes_invalid=0 send_seq=176442 receive_seq=176442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.323 rpi: temp=57.5 mcu_temp: temp=42.6 sd_pos=2969640 sysload=0.06 cputime=411.808 memavail=1625964 print_time=8276.297 buffer_time=2.037 print_stall=0 extruder: target=215 temp=214.8 pwm=0.511
Stats 8266.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6767896 bytes_read=2938189 bytes_retransmit=9 bytes_invalid=0 send_seq=176503 receive_seq=176503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.749 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=2972442 sysload=0.06 cputime=411.898 memavail=1625340 print_time=8277.550 buffer_time=2.289 print_stall=0 extruder: target=215 temp=214.9 pwm=0.458
Stats 8267.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6770437 bytes_read=2938750 bytes_retransmit=9 bytes_invalid=0 send_seq=176555 receive_seq=176555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.169 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=2973636 sysload=0.06 cputime=411.970 memavail=1625404 print_time=8278.451 buffer_time=2.190 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 8268.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000047 bytes_write=6772464 bytes_read=2939257 bytes_retransmit=9 bytes_invalid=0 send_seq=176599 receive_seq=176599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.334 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=2975802 sysload=0.06 cputime=412.055 memavail=1625372 print_time=8279.338 buffer_time=2.075 print_stall=0 extruder: target=215 temp=214.9 pwm=0.535
Stats 8269.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=6775168 bytes_read=2939865 bytes_retransmit=9 bytes_invalid=0 send_seq=176654 receive_seq=176654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=54.9 pwm=0.482 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2977780 sysload=0.06 cputime=412.139 memavail=1625168 print_time=8280.494 buffer_time=2.231 print_stall=0 extruder: target=215 temp=214.9 pwm=0.533
Stats 8270.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=6777261 bytes_read=2940386 bytes_retransmit=9 bytes_invalid=0 send_seq=176698 receive_seq=176698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.319 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2978872 sysload=0.06 cputime=412.215 memavail=1625120 print_time=8281.454 buffer_time=2.191 print_stall=0 extruder: target=215 temp=214.8 pwm=0.545
Stats 8271.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=6779978 bytes_read=2940943 bytes_retransmit=9 bytes_invalid=0 send_seq=176752 receive_seq=176752 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.9 sd_pos=2979893 sysload=0.06 cputime=412.287 memavail=1625364 print_time=8282.577 buffer_time=2.313 print_stall=0 extruder: target=215 temp=214.9 pwm=0.441
Stats 8272.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=6781863 bytes_read=2941460 bytes_retransmit=9 bytes_invalid=0 send_seq=176792 receive_seq=176792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.438 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=2980875 sysload=0.05 cputime=412.367 memavail=1625636 print_time=8283.513 buffer_time=2.248 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 8273.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000059 bytes_write=6783363 bytes_read=2941931 bytes_retransmit=9 bytes_invalid=0 send_seq=176826 receive_seq=176826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.047 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=2981945 sysload=0.05 cputime=412.441 memavail=1625332 print_time=8284.421 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.1 pwm=0.337
Stats 8274.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6785731 bytes_read=2942474 bytes_retransmit=9 bytes_invalid=0 send_seq=176874 receive_seq=176874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=2984054 sysload=0.05 cputime=412.528 memavail=1625580 print_time=8285.484 buffer_time=2.218 print_stall=0 extruder: target=215 temp=214.9 pwm=0.498
Stats 8275.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6787927 bytes_read=2943021 bytes_retransmit=9 bytes_invalid=0 send_seq=176920 receive_seq=176920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=2985606 sysload=0.05 cputime=412.605 memavail=1625888 print_time=8286.291 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.1 pwm=0.397
Stats 8276.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6790238 bytes_read=2943557 bytes_retransmit=9 bytes_invalid=0 send_seq=176967 receive_seq=176967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.082 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=2987931 sysload=0.05 cputime=412.683 memavail=1625428 print_time=8287.420 buffer_time=2.153 print_stall=0 extruder: target=215 temp=214.9 pwm=0.522
Stats 8277.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6792366 bytes_read=2944064 bytes_retransmit=9 bytes_invalid=0 send_seq=177011 receive_seq=177011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=2990463 sysload=0.05 cputime=412.765 memavail=1625388 print_time=8288.396 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.1 pwm=0.416
Stats 8278.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000048 bytes_write=6795544 bytes_read=2944705 bytes_retransmit=9 bytes_invalid=0 send_seq=177073 receive_seq=177073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.383 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=2992149 sysload=0.05 cputime=412.857 memavail=1625344 print_time=8289.548 buffer_time=2.279 print_stall=0 extruder: target=215 temp=215.1 pwm=0.454
Stats 8279.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6797461 bytes_read=2945213 bytes_retransmit=9 bytes_invalid=0 send_seq=177114 receive_seq=177114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.269 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=2993078 sysload=0.05 cputime=412.930 memavail=1625864 print_time=8290.639 buffer_time=2.369 print_stall=0 extruder: target=215 temp=214.9 pwm=0.508
Stats 8280.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6799303 bytes_read=2945705 bytes_retransmit=9 bytes_invalid=0 send_seq=177155 receive_seq=177155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=2994342 sysload=0.05 cputime=413.000 memavail=1625644 print_time=8291.407 buffer_time=2.136 print_stall=0 extruder: target=215 temp=215.1 pwm=0.442
Stats 8281.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6801181 bytes_read=2946236 bytes_retransmit=9 bytes_invalid=0 send_seq=177195 receive_seq=177195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.298 rpi: temp=58.4 mcu_temp: temp=42.5 sd_pos=2997314 sysload=0.05 cputime=413.095 memavail=1625660 print_time=8292.435 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.9 pwm=0.504
Stats 8282.6: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6804045 bytes_read=2946759 bytes_retransmit=9 bytes_invalid=0 send_seq=177253 receive_seq=177244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.447 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=2999675 sysload=0.04 cputime=413.185 memavail=1625660 print_time=8293.506 buffer_time=2.226 print_stall=0 extruder: target=215 temp=215.0 pwm=0.456
Stats 8283.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6805245 bytes_read=2947259 bytes_retransmit=9 bytes_invalid=0 send_seq=177283 receive_seq=177283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.267 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=3000952 sysload=0.04 cputime=413.255 memavail=1625432 print_time=8294.287 buffer_time=2.006 print_stall=0 extruder: target=215 temp=215.1 pwm=0.383
Stats 8284.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6807914 bytes_read=2947828 bytes_retransmit=9 bytes_invalid=0 send_seq=177336 receive_seq=177336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.076 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=3002379 sysload=0.04 cputime=413.332 memavail=1625344 print_time=8295.298 buffer_time=2.016 print_stall=0 extruder: target=215 temp=215.1 pwm=0.462
Stats 8285.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6809408 bytes_read=2948265 bytes_retransmit=9 bytes_invalid=0 send_seq=177368 receive_seq=177368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.107 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=3004377 sysload=0.04 cputime=413.403 memavail=1625420 print_time=8296.320 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.462
Stats 8286.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6810986 bytes_read=2948741 bytes_retransmit=9 bytes_invalid=0 send_seq=177403 receive_seq=177403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=3005157 sysload=0.04 cputime=413.450 memavail=1625880 print_time=8297.530 buffer_time=2.247 print_stall=0 extruder: target=215 temp=214.9 pwm=0.549
Stats 8287.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6812452 bytes_read=2949233 bytes_retransmit=9 bytes_invalid=0 send_seq=177436 receive_seq=177436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=43.2 sd_pos=3006613 sysload=0.04 cputime=413.515 memavail=1626128 print_time=8298.484 buffer_time=2.201 print_stall=0 extruder: target=215 temp=215.0 pwm=0.468
Stats 8288.6: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6813560 bytes_read=2949655 bytes_retransmit=9 bytes_invalid=0 send_seq=177463 receive_seq=177463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.203 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=3007140 sysload=0.04 cputime=413.580 memavail=1625596 print_time=8299.420 buffer_time=2.136 print_stall=0 extruder: target=215 temp=214.9 pwm=0.527
Stats 8289.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6815024 bytes_read=2950142 bytes_retransmit=9 bytes_invalid=0 send_seq=177497 receive_seq=177497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.724 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3008881 sysload=0.04 cputime=413.662 memavail=1625576 print_time=8300.353 buffer_time=2.068 print_stall=0 extruder: target=215 temp=214.9 pwm=0.488
Stats 8290.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6817930 bytes_read=2950738 bytes_retransmit=9 bytes_invalid=0 send_seq=177553 receive_seq=177553 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=3012766 sysload=0.04 cputime=413.771 memavail=1625664 print_time=8301.515 buffer_time=2.230 print_stall=0 extruder: target=215 temp=215.0 pwm=0.488
Stats 8291.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6820445 bytes_read=2951285 bytes_retransmit=9 bytes_invalid=0 send_seq=177605 receive_seq=177605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.245 rpi: temp=59.4 mcu_temp: temp=43.3 sd_pos=3014538 sysload=0.04 cputime=413.848 memavail=1625792 print_time=8302.435 buffer_time=2.149 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 8292.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6822009 bytes_read=2951762 bytes_retransmit=9 bytes_invalid=0 send_seq=177640 receive_seq=177640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.054 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=3014885 sysload=0.12 cputime=413.909 memavail=1626352 print_time=8303.376 buffer_time=2.090 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 8293.6: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=6824179 bytes_read=2952243 bytes_retransmit=9 bytes_invalid=0 send_seq=177685 receive_seq=177673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=87 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.467 rpi: temp=60.4 mcu_temp: temp=43.5 sd_pos=3015427 sysload=0.12 cputime=413.975 memavail=1626336 print_time=8304.671 buffer_time=2.383 print_stall=0 extruder: target=215 temp=215.0 pwm=0.371
Stats 8294.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=6827557 bytes_read=2952936 bytes_retransmit=9 bytes_invalid=0 send_seq=177751 receive_seq=177751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.352 rpi: temp=59.4 mcu_temp: temp=43.2 sd_pos=3017888 sysload=0.12 cputime=414.065 memavail=1626296 print_time=8305.680 buffer_time=2.391 print_stall=0 extruder: target=215 temp=214.8 pwm=0.571
Stats 8295.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=6829467 bytes_read=2953438 bytes_retransmit=9 bytes_invalid=0 send_seq=177791 receive_seq=177791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.233 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=3019179 sysload=0.12 cputime=414.122 memavail=1626868 print_time=8306.430 buffer_time=2.140 print_stall=0 extruder: target=215 temp=214.9 pwm=0.484
Stats 8296.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=6832133 bytes_read=2954014 bytes_retransmit=9 bytes_invalid=0 send_seq=177843 receive_seq=177843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.093 rpi: temp=59.4 mcu_temp: temp=42.9 sd_pos=3021622 sysload=0.12 cputime=414.191 memavail=1626368 print_time=8307.377 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.495
Stats 8297.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=6834495 bytes_read=2954536 bytes_retransmit=9 bytes_invalid=0 send_seq=177890 receive_seq=177890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3023738 sysload=0.11 cputime=414.272 memavail=1626076 print_time=8308.454 buffer_time=2.164 print_stall=0 extruder: target=215 temp=214.8 pwm=0.556
Stats 8298.6: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000028 mcu_task_stddev=0.000059 bytes_write=6837267 bytes_read=2955113 bytes_retransmit=9 bytes_invalid=0 send_seq=177945 receive_seq=177945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.122 rpi: temp=58.4 mcu_temp: temp=43.8 sd_pos=3024977 sysload=0.11 cputime=414.354 memavail=1625988 print_time=8309.574 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.0 pwm=0.417
Stats 8299.6: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=6839628 bytes_read=2955685 bytes_retransmit=9 bytes_invalid=0 send_seq=177993 receive_seq=177993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=57.5 mcu_temp: temp=43.9 sd_pos=3025878 sysload=0.11 cputime=414.428 memavail=1626144 print_time=8310.535 buffer_time=2.242 print_stall=0 extruder: target=215 temp=214.8 pwm=0.534
Stats 8300.6: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=6842057 bytes_read=2956222 bytes_retransmit=9 bytes_invalid=0 send_seq=178043 receive_seq=178043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.388 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=3027288 sysload=0.11 cputime=414.501 memavail=1626256 print_time=8311.517 buffer_time=2.225 print_stall=0 extruder: target=215 temp=214.9 pwm=0.530
Stats 8301.6: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=6843892 bytes_read=2956714 bytes_retransmit=9 bytes_invalid=0 send_seq=178081 receive_seq=178081 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3029686 sysload=0.11 cputime=414.587 memavail=1625992 print_time=8312.315 buffer_time=2.022 print_stall=0 extruder: target=215 temp=215.1 pwm=0.405
Stats 8302.6: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=6845740 bytes_read=2957235 bytes_retransmit=9 bytes_invalid=0 send_seq=178122 receive_seq=178122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.035 rpi: temp=59.4 mcu_temp: temp=43.2 sd_pos=3031067 sysload=0.10 cputime=414.665 memavail=1626192 print_time=8313.332 buffer_time=2.038 print_stall=0 extruder: target=215 temp=215.0 pwm=0.517
Stats 8303.6: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000029 mcu_task_stddev=0.000050 bytes_write=6848434 bytes_read=2957792 bytes_retransmit=9 bytes_invalid=0 send_seq=178176 receive_seq=178176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996334 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=59.4 mcu_temp: temp=43.8 sd_pos=3033685 sysload=0.10 cputime=414.756 memavail=1625936 print_time=8314.516 buffer_time=2.222 print_stall=0 extruder: target=215 temp=215.0 pwm=0.467
Stats 8304.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6850504 bytes_read=2958320 bytes_retransmit=9 bytes_invalid=0 send_seq=178218 receive_seq=178218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=43.3 sd_pos=3035179 sysload=0.10 cputime=414.833 memavail=1626248 print_time=8315.312 buffer_time=2.018 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 8305.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6852913 bytes_read=2958886 bytes_retransmit=9 bytes_invalid=0 send_seq=178268 receive_seq=178268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.412 rpi: temp=59.4 mcu_temp: temp=43.9 sd_pos=3036664 sysload=0.10 cputime=414.911 memavail=1626048 print_time=8316.422 buffer_time=2.127 print_stall=0 extruder: target=215 temp=215.1 pwm=0.482
Stats 8306.6: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6854799 bytes_read=2959373 bytes_retransmit=9 bytes_invalid=0 send_seq=178308 receive_seq=178308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=54.9 pwm=0.434 rpi: temp=59.4 mcu_temp: temp=43.5 sd_pos=3038491 sysload=0.10 cputime=414.982 memavail=1625920 print_time=8317.386 buffer_time=2.090 print_stall=0 extruder: target=215 temp=215.0 pwm=0.561
Stats 8307.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6856614 bytes_read=2959870 bytes_retransmit=9 bytes_invalid=0 send_seq=178347 receive_seq=178347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.9 pwm=0.542 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=3041345 sysload=0.09 cputime=415.059 memavail=1626180 print_time=8318.396 buffer_time=2.100 print_stall=0 extruder: target=215 temp=215.1 pwm=0.523
Stats 8308.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6858733 bytes_read=2960406 bytes_retransmit=9 bytes_invalid=0 send_seq=178391 receive_seq=178391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=59.4 mcu_temp: temp=43.3 sd_pos=3043349 sysload=0.09 cputime=415.145 memavail=1626204 print_time=8319.398 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.1 pwm=0.510
Stats 8309.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6860173 bytes_read=2960879 bytes_retransmit=9 bytes_invalid=0 send_seq=178425 receive_seq=178425 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.137 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3044503 sysload=0.09 cputime=415.216 memavail=1626444 print_time=8320.395 buffer_time=2.097 print_stall=0 extruder: target=215 temp=215.2 pwm=0.445
Stats 8310.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6862138 bytes_read=2961386 bytes_retransmit=9 bytes_invalid=0 send_seq=178466 receive_seq=178466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=58.4 mcu_temp: temp=42.9 sd_pos=3046928 sysload=0.09 cputime=415.302 memavail=1626472 print_time=8321.546 buffer_time=2.248 print_stall=0 extruder: target=215 temp=215.2 pwm=0.430
Stats 8311.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6863279 bytes_read=2961842 bytes_retransmit=9 bytes_invalid=0 send_seq=178494 receive_seq=178494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=3047640 sysload=0.09 cputime=415.371 memavail=1626492 print_time=8322.379 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.1 pwm=0.497
Stats 8312.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=6864876 bytes_read=2962319 bytes_retransmit=9 bytes_invalid=0 send_seq=178532 receive_seq=178532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.096 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3049414 sysload=0.08 cputime=415.454 memavail=1626468 print_time=8323.459 buffer_time=2.159 print_stall=0 extruder: target=215 temp=215.0 pwm=0.574
Stats 8313.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6866817 bytes_read=2962851 bytes_retransmit=9 bytes_invalid=0 send_seq=178575 receive_seq=178575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3051334 sysload=0.08 cputime=415.537 memavail=1626460 print_time=8324.572 buffer_time=2.271 print_stall=0 extruder: target=215 temp=215.1 pwm=0.444
Stats 8314.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6869379 bytes_read=2963427 bytes_retransmit=9 bytes_invalid=0 send_seq=178627 receive_seq=178627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.1 pwm=0.228 rpi: temp=59.9 mcu_temp: temp=43.5 sd_pos=3053914 sysload=0.08 cputime=415.634 memavail=1626212 print_time=8325.403 buffer_time=2.102 print_stall=0 extruder: target=215 temp=215.0 pwm=0.538
Stats 8315.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6872575 bytes_read=2964029 bytes_retransmit=9 bytes_invalid=0 send_seq=178690 receive_seq=178690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=54.9 pwm=0.504 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=3056335 sysload=0.08 cputime=415.722 memavail=1626204 print_time=8326.396 buffer_time=2.093 print_stall=0 extruder: target=215 temp=215.0 pwm=0.541
Stats 8316.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6875586 bytes_read=2964626 bytes_retransmit=9 bytes_invalid=0 send_seq=178749 receive_seq=178749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.253 rpi: temp=59.9 mcu_temp: temp=43.2 sd_pos=3058602 sysload=0.08 cputime=415.811 memavail=1626208 print_time=8327.424 buffer_time=2.120 print_stall=0 extruder: target=215 temp=215.1 pwm=0.433
Stats 8317.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6877914 bytes_read=2965187 bytes_retransmit=9 bytes_invalid=0 send_seq=178798 receive_seq=178798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=59.4 mcu_temp: temp=43.7 sd_pos=3059321 sysload=0.08 cputime=415.882 memavail=1626208 print_time=8328.622 buffer_time=2.318 print_stall=0 extruder: target=215 temp=215.0 pwm=0.523
Stats 8318.7: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000024 mcu_task_stddev=0.000051 bytes_write=6879357 bytes_read=2965639 bytes_retransmit=9 bytes_invalid=0 send_seq=178831 receive_seq=178831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996332 heater_bed: target=55 temp=55.0 pwm=0.366 rpi: temp=59.4 mcu_temp: temp=43.5 sd_pos=3059783 sysload=0.08 cputime=415.940 memavail=1625720 print_time=8329.485 buffer_time=2.181 print_stall=0 extruder: target=215 temp=215.0 pwm=0.523
Stats 8319.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000056 bytes_write=6881702 bytes_read=2966187 bytes_retransmit=9 bytes_invalid=0 send_seq=178877 receive_seq=178877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=55.0 pwm=0.330 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3061255 sysload=0.08 cputime=416.012 memavail=1625472 print_time=8330.363 buffer_time=2.058 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 8320.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000056 bytes_write=6884095 bytes_read=2966743 bytes_retransmit=9 bytes_invalid=0 send_seq=178925 receive_seq=178925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996331 heater_bed: target=55 temp=54.9 pwm=0.639 rpi: temp=58.9 mcu_temp: temp=43.0 sd_pos=3064004 sysload=0.08 cputime=416.104 memavail=1625200 print_time=8331.484 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 8321.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000056 bytes_write=6885797 bytes_read=2967220 bytes_retransmit=9 bytes_invalid=0 send_seq=178963 receive_seq=178963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996330 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3065754 sysload=0.08 cputime=416.188 memavail=1625724 print_time=8332.352 buffer_time=2.046 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 8322.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000056 bytes_write=6888236 bytes_read=2967782 bytes_retransmit=9 bytes_invalid=0 send_seq=179012 receive_seq=179012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996329 heater_bed: target=55 temp=55.0 pwm=0.196 rpi: temp=58.9 mcu_temp: temp=43.7 sd_pos=3068200 sysload=0.07 cputime=416.284 memavail=1625868 print_time=8333.417 buffer_time=2.110 print_stall=0 extruder: target=215 temp=215.1 pwm=0.490
Stats 8323.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000056 bytes_write=6891010 bytes_read=2968358 bytes_retransmit=9 bytes_invalid=0 send_seq=179067 receive_seq=179067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=3069314 sysload=0.07 cputime=416.368 memavail=1625672 print_time=8334.491 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 8324.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6893875 bytes_read=2968951 bytes_retransmit=9 bytes_invalid=0 send_seq=179125 receive_seq=179125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=54.9 pwm=0.464 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=3070285 sysload=0.07 cputime=416.444 memavail=1625664 print_time=8335.523 buffer_time=2.214 print_stall=0 extruder: target=215 temp=214.8 pwm=0.640
Stats 8325.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6895976 bytes_read=2969483 bytes_retransmit=9 bytes_invalid=0 send_seq=179168 receive_seq=179168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996327 heater_bed: target=55 temp=55.0 pwm=0.190 rpi: temp=59.4 mcu_temp: temp=43.3 sd_pos=3072004 sysload=0.07 cputime=416.529 memavail=1625732 print_time=8336.411 buffer_time=2.101 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 8326.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6898500 bytes_read=2970039 bytes_retransmit=9 bytes_invalid=0 send_seq=179219 receive_seq=179219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996363 heater_bed: target=55 temp=54.9 pwm=0.460 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=3074896 sysload=0.07 cputime=416.617 memavail=1625192 print_time=8337.520 buffer_time=2.210 print_stall=0 extruder: target=215 temp=215.1 pwm=0.471
Stats 8327.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6900742 bytes_read=2970556 bytes_retransmit=9 bytes_invalid=0 send_seq=179265 receive_seq=179265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.104 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3076570 sysload=0.06 cputime=416.687 memavail=1625392 print_time=8338.371 buffer_time=2.061 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 8328.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6903182 bytes_read=2971113 bytes_retransmit=9 bytes_invalid=0 send_seq=179313 receive_seq=179313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.112 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3078633 sysload=0.06 cputime=416.774 memavail=1625688 print_time=8339.462 buffer_time=2.151 print_stall=0 extruder: target=215 temp=215.1 pwm=0.497
Stats 8329.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6906182 bytes_read=2971720 bytes_retransmit=9 bytes_invalid=0 send_seq=179371 receive_seq=179371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.131 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3080534 sysload=0.06 cputime=416.867 memavail=1625704 print_time=8340.697 buffer_time=2.385 print_stall=0 extruder: target=215 temp=215.2 pwm=0.408
Stats 8330.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6907624 bytes_read=2972177 bytes_retransmit=9 bytes_invalid=0 send_seq=179405 receive_seq=179405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.252 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=3082480 sysload=0.06 cputime=416.947 memavail=1625672 print_time=8341.480 buffer_time=2.168 print_stall=0 extruder: target=215 temp=215.1 pwm=0.472
Stats 8331.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6909959 bytes_read=2972734 bytes_retransmit=9 bytes_invalid=0 send_seq=179453 receive_seq=179453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3085507 sysload=0.06 cputime=417.049 memavail=1625652 print_time=8342.638 buffer_time=2.324 print_stall=0 extruder: target=215 temp=215.0 pwm=0.529
Stats 8332.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6911328 bytes_read=2973190 bytes_retransmit=9 bytes_invalid=0 send_seq=179484 receive_seq=179484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=59.4 mcu_temp: temp=43.5 sd_pos=3086814 sysload=0.06 cputime=417.126 memavail=1625680 print_time=8343.370 buffer_time=2.055 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 8333.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000051 bytes_write=6912458 bytes_read=2973627 bytes_retransmit=9 bytes_invalid=0 send_seq=179514 receive_seq=179514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3087579 sysload=0.06 cputime=417.194 memavail=1625436 print_time=8344.342 buffer_time=2.024 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 8334.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6914828 bytes_read=2974199 bytes_retransmit=9 bytes_invalid=0 send_seq=179562 receive_seq=179562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.084 rpi: temp=59.4 mcu_temp: temp=42.8 sd_pos=3090201 sysload=0.06 cputime=417.289 memavail=1625204 print_time=8345.400 buffer_time=2.079 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 8335.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6916717 bytes_read=2974715 bytes_retransmit=9 bytes_invalid=0 send_seq=179605 receive_seq=179605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.213 rpi: temp=58.9 mcu_temp: temp=43.5 sd_pos=3091747 sysload=0.06 cputime=417.370 memavail=1625156 print_time=8346.455 buffer_time=2.132 print_stall=0 extruder: target=215 temp=214.9 pwm=0.521
Stats 8336.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6920484 bytes_read=2975292 bytes_retransmit=9 bytes_invalid=0 send_seq=179675 receive_seq=179663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=599 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.1 pwm=0.163 rpi: temp=58.9 mcu_temp: temp=43.4 sd_pos=3095217 sysload=0.06 cputime=417.469 memavail=1625936 print_time=8347.931 buffer_time=2.602 print_stall=0 extruder: target=215 temp=215.0 pwm=0.521
Stats 8337.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000050 bytes_write=6923158 bytes_read=2975939 bytes_retransmit=9 bytes_invalid=0 send_seq=179729 receive_seq=179729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.118 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3096538 sysload=0.05 cputime=417.532 memavail=1625440 print_time=8348.590 buffer_time=2.261 print_stall=0 extruder: target=215 temp=214.9 pwm=0.532
Stats 8338.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=6924792 bytes_read=2976436 bytes_retransmit=9 bytes_invalid=0 send_seq=179765 receive_seq=179765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.224 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=3096888 sysload=0.05 cputime=417.597 memavail=1625692 print_time=8349.433 buffer_time=2.103 print_stall=0 extruder: target=215 temp=214.9 pwm=0.520
Stats 8339.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=6926639 bytes_read=2976923 bytes_retransmit=9 bytes_invalid=0 send_seq=179805 receive_seq=179805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.404 rpi: temp=58.4 mcu_temp: temp=43.3 sd_pos=3097399 sysload=0.05 cputime=417.661 memavail=1625672 print_time=8350.656 buffer_time=2.326 print_stall=0 extruder: target=215 temp=214.9 pwm=0.503
Stats 8340.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=6928471 bytes_read=2977440 bytes_retransmit=9 bytes_invalid=0 send_seq=179845 receive_seq=179845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.138 rpi: temp=59.9 mcu_temp: temp=43.2 sd_pos=3099419 sysload=0.05 cputime=417.744 memavail=1625968 print_time=8351.436 buffer_time=2.106 print_stall=0 extruder: target=215 temp=214.8 pwm=0.587
Stats 8341.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=6931560 bytes_read=2978038 bytes_retransmit=9 bytes_invalid=0 send_seq=179905 receive_seq=179905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.114 rpi: temp=59.4 mcu_temp: temp=42.9 sd_pos=3101181 sysload=0.05 cputime=417.832 memavail=1625876 print_time=8352.627 buffer_time=2.296 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 8342.7: gcodein=0 mcu: mcu_awake=0.027 mcu_task_avg=0.000030 mcu_task_stddev=0.000060 bytes_write=6933340 bytes_read=2978500 bytes_retransmit=9 bytes_invalid=0 send_seq=179942 receive_seq=179942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.184 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=3101821 sysload=0.05 cputime=417.902 memavail=1625600 print_time=8353.351 buffer_time=2.020 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 8343.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6935573 bytes_read=2979051 bytes_retransmit=9 bytes_invalid=0 send_seq=179988 receive_seq=179988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.201 rpi: temp=59.4 mcu_temp: temp=43.2 sd_pos=3103921 sysload=0.05 cputime=417.993 memavail=1625880 print_time=8354.394 buffer_time=2.063 print_stall=0 extruder: target=215 temp=214.9 pwm=0.523
Stats 8344.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6937940 bytes_read=2979581 bytes_retransmit=9 bytes_invalid=0 send_seq=180036 receive_seq=180036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=54.9 pwm=0.566 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3105842 sysload=0.05 cputime=418.088 memavail=1626132 print_time=8355.418 buffer_time=2.086 print_stall=0 extruder: target=215 temp=215.0 pwm=0.457
Stats 8345.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6940696 bytes_read=2980142 bytes_retransmit=9 bytes_invalid=0 send_seq=180092 receive_seq=180092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.199 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3107644 sysload=0.05 cputime=418.178 memavail=1625888 print_time=8356.583 buffer_time=2.251 print_stall=0 extruder: target=215 temp=214.9 pwm=0.477
Stats 8346.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6942933 bytes_read=2980689 bytes_retransmit=9 bytes_invalid=0 send_seq=180138 receive_seq=180138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.357 rpi: temp=59.4 mcu_temp: temp=43.1 sd_pos=3109894 sysload=0.05 cputime=418.268 memavail=1625352 print_time=8357.443 buffer_time=2.111 print_stall=0 extruder: target=215 temp=215.0 pwm=0.543
Stats 8347.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=6945596 bytes_read=2981260 bytes_retransmit=9 bytes_invalid=0 send_seq=180192 receive_seq=180192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.026 rpi: temp=58.9 mcu_temp: temp=43.0 sd_pos=3112053 sysload=0.04 cputime=418.357 memavail=1625360 print_time=8358.562 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.1 pwm=0.427
Stats 8348.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6947631 bytes_read=2981789 bytes_retransmit=9 bytes_invalid=0 send_seq=180235 receive_seq=180235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.241 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=3113743 sysload=0.04 cputime=418.440 memavail=1625592 print_time=8359.508 buffer_time=2.174 print_stall=0 extruder: target=215 temp=214.9 pwm=0.518
Stats 8349.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6949580 bytes_read=2982316 bytes_retransmit=9 bytes_invalid=0 send_seq=180277 receive_seq=180277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=54.9 pwm=0.383 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=3116776 sysload=0.04 cputime=418.537 memavail=1625856 print_time=8360.539 buffer_time=2.205 print_stall=0 extruder: target=215 temp=214.9 pwm=0.592
Stats 8350.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6951307 bytes_read=2982807 bytes_retransmit=9 bytes_invalid=0 send_seq=180315 receive_seq=180315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.257 rpi: temp=58.9 mcu_temp: temp=43.6 sd_pos=3118277 sysload=0.04 cputime=418.604 memavail=1626128 print_time=8361.460 buffer_time=2.125 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 8351.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6952681 bytes_read=2983249 bytes_retransmit=9 bytes_invalid=0 send_seq=180346 receive_seq=180346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.070 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3119342 sysload=0.04 cputime=418.661 memavail=1625884 print_time=8362.479 buffer_time=2.144 print_stall=0 extruder: target=215 temp=215.0 pwm=0.489
Stats 8352.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6954607 bytes_read=2983766 bytes_retransmit=9 bytes_invalid=0 send_seq=180386 receive_seq=180386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3121411 sysload=0.04 cputime=418.744 memavail=1626124 print_time=8363.380 buffer_time=2.044 print_stall=0 extruder: target=215 temp=215.1 pwm=0.489
Stats 8353.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000052 bytes_write=6956209 bytes_read=2984242 bytes_retransmit=9 bytes_invalid=0 send_seq=180421 receive_seq=180421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.113 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=3122846 sysload=0.04 cputime=418.826 memavail=1626128 print_time=8364.359 buffer_time=2.023 print_stall=0 extruder: target=215 temp=215.0 pwm=0.486
Stats 8354.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=6959611 bytes_read=2984879 bytes_retransmit=9 bytes_invalid=0 send_seq=180488 receive_seq=180488 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.263 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3126167 sysload=0.04 cputime=418.929 memavail=1625624 print_time=8365.729 buffer_time=2.392 print_stall=0 extruder: target=215 temp=215.1 pwm=0.455
Stats 8355.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=6962110 bytes_read=2985446 bytes_retransmit=9 bytes_invalid=0 send_seq=180538 receive_seq=180538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=54.9 pwm=0.411 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3128218 sysload=0.04 cputime=419.020 memavail=1625848 print_time=8366.577 buffer_time=2.240 print_stall=0 extruder: target=215 temp=214.9 pwm=0.509
Stats 8356.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=6964252 bytes_read=2985967 bytes_retransmit=9 bytes_invalid=0 send_seq=180582 receive_seq=180582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.340 rpi: temp=59.4 mcu_temp: temp=43.6 sd_pos=3128824 sysload=0.04 cputime=419.077 memavail=1625368 print_time=8367.450 buffer_time=2.112 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 8357.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=6966237 bytes_read=2986464 bytes_retransmit=9 bytes_invalid=0 send_seq=180624 receive_seq=180624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.279 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3129531 sysload=0.04 cputime=419.136 memavail=1625332 print_time=8368.741 buffer_time=2.403 print_stall=0 extruder: target=215 temp=215.0 pwm=0.519
Stats 8358.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000053 bytes_write=6968613 bytes_read=2987026 bytes_retransmit=9 bytes_invalid=0 send_seq=180673 receive_seq=180673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=54.9 pwm=0.360 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3131343 sysload=0.04 cputime=419.219 memavail=1625372 print_time=8369.564 buffer_time=2.225 print_stall=0 extruder: target=215 temp=215.0 pwm=0.455
Stats 8359.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6970352 bytes_read=2987528 bytes_retransmit=9 bytes_invalid=0 send_seq=180710 receive_seq=180710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.111 rpi: temp=58.9 mcu_temp: temp=43.3 sd_pos=3133774 sysload=0.04 cputime=419.309 memavail=1625604 print_time=8370.542 buffer_time=2.202 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 8360.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6972807 bytes_read=2988070 bytes_retransmit=9 bytes_invalid=0 send_seq=180761 receive_seq=180761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.8 pwm=0.770 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3135258 sysload=0.04 cputime=419.396 memavail=1625940 print_time=8371.394 buffer_time=2.054 print_stall=0 extruder: target=215 temp=215.0 pwm=0.445
Stats 8361.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6975185 bytes_read=2988632 bytes_retransmit=9 bytes_invalid=0 send_seq=180810 receive_seq=180810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.404 rpi: temp=57.0 mcu_temp: temp=43.3 sd_pos=3136718 sysload=0.04 cputime=419.481 memavail=1625688 print_time=8372.523 buffer_time=2.182 print_stall=0 extruder: target=215 temp=215.0 pwm=0.513
Stats 8362.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6977559 bytes_read=2989173 bytes_retransmit=9 bytes_invalid=0 send_seq=180858 receive_seq=180858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=54.9 pwm=0.622 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3138058 sysload=0.03 cputime=419.560 memavail=1625428 print_time=8373.576 buffer_time=2.234 print_stall=0 extruder: target=215 temp=214.9 pwm=0.554
Stats 8363.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000028 mcu_task_stddev=0.000050 bytes_write=6979450 bytes_read=2989660 bytes_retransmit=9 bytes_invalid=0 send_seq=180898 receive_seq=180898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.0 pwm=0.200 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=3139576 sysload=0.03 cputime=419.642 memavail=1625696 print_time=8374.409 buffer_time=2.066 print_stall=0 extruder: target=215 temp=215.3 pwm=0.303
Stats 8364.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6982174 bytes_read=2990263 bytes_retransmit=9 bytes_invalid=0 send_seq=180952 receive_seq=180952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.223 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3141829 sysload=0.03 cputime=419.740 memavail=1625508 print_time=8375.585 buffer_time=2.242 print_stall=0 extruder: target=215 temp=215.1 pwm=0.494
Stats 8365.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6984401 bytes_read=2990799 bytes_retransmit=9 bytes_invalid=0 send_seq=180999 receive_seq=180999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.0 pwm=0.290 rpi: temp=58.4 mcu_temp: temp=43.6 sd_pos=3143094 sysload=0.03 cputime=419.824 memavail=1625840 print_time=8376.522 buffer_time=2.178 print_stall=0 extruder: target=215 temp=214.9 pwm=0.540
Stats 8366.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6986819 bytes_read=2991331 bytes_retransmit=9 bytes_invalid=0 send_seq=181048 receive_seq=181048 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.0 pwm=0.103 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=3145103 sysload=0.03 cputime=419.909 memavail=1625544 print_time=8377.484 buffer_time=2.139 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 8367.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6988673 bytes_read=2991843 bytes_retransmit=9 bytes_invalid=0 send_seq=181087 receive_seq=181087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.260 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=3148069 sysload=0.03 cputime=420.009 memavail=1625568 print_time=8378.515 buffer_time=2.170 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 8368.7: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000029 mcu_task_stddev=0.000060 bytes_write=6990919 bytes_read=2992384 bytes_retransmit=9 bytes_invalid=0 send_seq=181135 receive_seq=181135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=71996333 heater_bed: target=55 temp=55.0 pwm=0.329 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3149755 sysload=0.03 cputime=420.091 memavail=1625568 print_time=8379.527 buffer_time=2.181 print_stall=0 extruder: target=215 temp=214.9 pwm=0.562
Stats 8369.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6992416 bytes_read=2992857 bytes_retransmit=9 bytes_invalid=0 send_seq=181169 receive_seq=181169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=3151149 sysload=0.03 cputime=420.171 memavail=1625548 print_time=8380.625 buffer_time=2.278 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 8370.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6993485 bytes_read=2993304 bytes_retransmit=9 bytes_invalid=0 send_seq=181195 receive_seq=181195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=55 temp=55.0 pwm=0.334 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3152260 sysload=0.03 cputime=420.245 memavail=1625372 print_time=8381.471 buffer_time=2.123 print_stall=0 extruder: target=215 temp=214.9 pwm=0.483
Stats 8371.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6994927 bytes_read=2993770 bytes_retransmit=9 bytes_invalid=0 send_seq=181228 receive_seq=181228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=54.9 pwm=0.494 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3153440 sysload=0.03 cputime=420.318 memavail=1625356 print_time=8382.541 buffer_time=2.192 print_stall=0 extruder: target=215 temp=215.1 pwm=0.408
Stats 8372.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6998152 bytes_read=2994367 bytes_retransmit=9 bytes_invalid=0 send_seq=181290 receive_seq=181290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.0 pwm=0.368 rpi: temp=59.9 mcu_temp: temp=43.2 sd_pos=3156197 sysload=0.03 cputime=420.406 memavail=1625308 print_time=8383.633 buffer_time=2.283 print_stall=0 extruder: target=215 temp=215.2 pwm=0.381
Stats 8373.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000050 bytes_write=6999955 bytes_read=2994879 bytes_retransmit=9 bytes_invalid=0 send_seq=181329 receive_seq=181329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=54.9 pwm=0.266 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=3156863 sysload=0.03 cputime=420.476 memavail=1625572 print_time=8384.569 buffer_time=2.219 print_stall=0 extruder: target=215 temp=215.2 pwm=0.351
Stats 8374.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7002007 bytes_read=2995410 bytes_retransmit=9 bytes_invalid=0 send_seq=181372 receive_seq=181372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.043 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3157700 sysload=0.03 cputime=420.552 memavail=1625568 print_time=8385.907 buffer_time=2.555 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 8375.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7003825 bytes_read=2995907 bytes_retransmit=9 bytes_invalid=0 send_seq=181414 receive_seq=181414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=3159297 sysload=0.03 cputime=420.633 memavail=1626048 print_time=8386.615 buffer_time=2.263 print_stall=0 extruder: target=215 temp=215.0 pwm=0.527
Stats 8376.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7005563 bytes_read=2996419 bytes_retransmit=9 bytes_invalid=0 send_seq=181453 receive_seq=181453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.362 rpi: temp=58.9 mcu_temp: temp=42.8 sd_pos=3160798 sysload=0.03 cputime=420.702 memavail=1626092 print_time=8387.461 buffer_time=2.108 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 8377.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7008288 bytes_read=2996990 bytes_retransmit=9 bytes_invalid=0 send_seq=181507 receive_seq=181507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=3 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.654 rpi: temp=58.4 mcu_temp: temp=43.2 sd_pos=3162897 sysload=0.03 cputime=420.781 memavail=1625840 print_time=8388.499 buffer_time=2.146 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 8378.7: gcodein=0 mcu: mcu_awake=0.020 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7010265 bytes_read=2997487 bytes_retransmit=9 bytes_invalid=0 send_seq=181549 receive_seq=181549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.002 rpi: temp=58.9 mcu_temp: temp=43.2 sd_pos=3164416 sysload=0.03 cputime=420.864 memavail=1625540 print_time=8389.592 buffer_time=2.238 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 8379.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=7012483 bytes_read=2998045 bytes_retransmit=9 bytes_invalid=0 send_seq=181594 receive_seq=181594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.341 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=3165479 sysload=0.03 cputime=420.939 memavail=1625564 print_time=8390.427 buffer_time=2.072 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 8380.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=7014630 bytes_read=2998576 bytes_retransmit=9 bytes_invalid=0 send_seq=181640 receive_seq=181640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.061 rpi: temp=58.4 mcu_temp: temp=42.9 sd_pos=3166532 sysload=0.03 cputime=421.005 memavail=1625572 print_time=8391.453 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.0 pwm=0.551
Stats 8381.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=7016840 bytes_read=2999103 bytes_retransmit=9 bytes_invalid=0 send_seq=181688 receive_seq=181688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=42.9 sd_pos=3168427 sysload=0.03 cputime=421.074 memavail=1625812 print_time=8392.386 buffer_time=2.031 print_stall=0 extruder: target=215 temp=214.8 pwm=0.590
Stats 8382.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=7018760 bytes_read=2999625 bytes_retransmit=9 bytes_invalid=0 send_seq=181729 receive_seq=181729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996339 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=3171270 sysload=0.02 cputime=421.178 memavail=1625836 print_time=8393.445 buffer_time=2.089 print_stall=0 extruder: target=215 temp=214.9 pwm=0.437
Stats 8383.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000055 bytes_write=7021069 bytes_read=3000181 bytes_retransmit=9 bytes_invalid=0 send_seq=181780 receive_seq=181780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996340 heater_bed: target=55 temp=55.0 pwm=0.206 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=3172570 sysload=0.02 cputime=421.263 memavail=1625740 print_time=8394.507 buffer_time=2.150 print_stall=0 extruder: target=215 temp=214.9 pwm=0.545
Stats 8384.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=7022321 bytes_read=3000644 bytes_retransmit=9 bytes_invalid=0 send_seq=181812 receive_seq=181812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996338 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.4 sd_pos=3173724 sysload=0.02 cputime=421.339 memavail=1625860 print_time=8395.368 buffer_time=2.010 print_stall=0 extruder: target=215 temp=214.9 pwm=0.491
Stats 8385.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=7023977 bytes_read=3001146 bytes_retransmit=9 bytes_invalid=0 send_seq=181849 receive_seq=181849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=71996337 heater_bed: target=55 temp=55.1 pwm=0.055 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3175052 sysload=0.02 cputime=421.428 memavail=1625792 print_time=8396.511 buffer_time=2.152 print_stall=0 extruder: target=215 temp=214.9 pwm=0.496
Stats 8386.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=7026600 bytes_read=3001717 bytes_retransmit=9 bytes_invalid=0 send_seq=181903 receive_seq=181903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996336 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=42.9 sd_pos=3178294 sysload=0.02 cputime=421.518 memavail=1626580 print_time=8397.601 buffer_time=2.242 print_stall=0 extruder: target=215 temp=214.9 pwm=0.576
Stats 8387.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=7029284 bytes_read=3002264 bytes_retransmit=9 bytes_invalid=0 send_seq=181955 receive_seq=181955 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=55 temp=54.9 pwm=0.456 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=3180824 sysload=0.10 cputime=421.590 memavail=1626588 print_time=8398.490 buffer_time=2.130 print_stall=0 extruder: target=215 temp=214.9 pwm=0.510
Stats 8388.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000051 bytes_write=7031135 bytes_read=3002781 bytes_retransmit=9 bytes_invalid=0 send_seq=181995 receive_seq=181995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.584 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=3181416 sysload=0.10 cputime=421.662 memavail=1626644 print_time=8399.555 buffer_time=2.194 print_stall=0 extruder: target=215 temp=215.0 pwm=0.510
Stats 8389.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000063 bytes_write=7033276 bytes_read=3003328 bytes_retransmit=9 bytes_invalid=0 send_seq=182041 receive_seq=182041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=54.9 pwm=0.486 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=3182528 sysload=0.10 cputime=421.735 memavail=1626392 print_time=8400.376 buffer_time=2.014 print_stall=0 extruder: target=215 temp=215.0 pwm=0.453
Stats 8390.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000063 bytes_write=7035936 bytes_read=3003890 bytes_retransmit=9 bytes_invalid=0 send_seq=182096 receive_seq=182096 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=71996342 heater_bed: target=55 temp=55.0 pwm=0.037 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=3184726 sysload=0.10 cputime=421.829 memavail=1626400 print_time=8401.612 buffer_time=2.249 print_stall=0 extruder: target=215 temp=214.9 pwm=0.564
Stats 8391.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000063 bytes_write=7037869 bytes_read=3004422 bytes_retransmit=9 bytes_invalid=0 send_seq=182139 receive_seq=182139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.207 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3186605 sysload=0.10 cputime=421.915 memavail=1626404 print_time=8402.441 buffer_time=2.077 print_stall=0 extruder: target=215 temp=215.1 pwm=0.420
Stats 8392.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000063 bytes_write=7040209 bytes_read=3004958 bytes_retransmit=9 bytes_invalid=0 send_seq=182186 receive_seq=182186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.0 pwm=0.132 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3187954 sysload=0.09 cputime=421.996 memavail=1626404 print_time=8403.549 buffer_time=2.185 print_stall=0 extruder: target=215 temp=215.0 pwm=0.544
Stats 8393.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000029 mcu_task_stddev=0.000063 bytes_write=7042627 bytes_read=3005495 bytes_retransmit=9 bytes_invalid=0 send_seq=182236 receive_seq=182236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.452 rpi: temp=57.9 mcu_temp: temp=43.6 sd_pos=3189210 sysload=0.09 cputime=422.075 memavail=1626404 print_time=8404.544 buffer_time=2.179 print_stall=0 extruder: target=215 temp=214.9 pwm=0.584
Stats 8394.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7044670 bytes_read=3006048 bytes_retransmit=9 bytes_invalid=0 send_seq=182280 receive_seq=182280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.081 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=3190658 sysload=0.09 cputime=422.154 memavail=1626092 print_time=8405.472 buffer_time=2.106 print_stall=0 extruder: target=215 temp=215.1 pwm=0.438
Stats 8395.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7046731 bytes_read=3006569 bytes_retransmit=9 bytes_invalid=0 send_seq=182324 receive_seq=182324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.360 rpi: temp=57.5 mcu_temp: temp=43.4 sd_pos=3192733 sysload=0.09 cputime=422.242 memavail=1626064 print_time=8406.403 buffer_time=2.037 print_stall=0 extruder: target=215 temp=215.0 pwm=0.469
Stats 8396.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7048847 bytes_read=3007076 bytes_retransmit=9 bytes_invalid=0 send_seq=182368 receive_seq=182368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.160 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=3195874 sysload=0.09 cputime=422.342 memavail=1625856 print_time=8407.520 buffer_time=2.153 print_stall=0 extruder: target=215 temp=215.0 pwm=0.454
Stats 8397.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7049988 bytes_read=3007557 bytes_retransmit=9 bytes_invalid=0 send_seq=182398 receive_seq=182398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.499 rpi: temp=57.9 mcu_temp: temp=42.6 sd_pos=3196450 sysload=0.09 cputime=422.408 memavail=1625584 print_time=8408.435 buffer_time=2.067 print_stall=0 extruder: target=215 temp=215.1 pwm=0.447
Stats 8398.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7051405 bytes_read=3008019 bytes_retransmit=9 bytes_invalid=0 send_seq=182433 receive_seq=182433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.0 pwm=0.176 rpi: temp=58.4 mcu_temp: temp=43.4 sd_pos=3197370 sysload=0.09 cputime=422.482 memavail=1625788 print_time=8409.458 buffer_time=2.089 print_stall=0 extruder: target=215 temp=215.1 pwm=0.440
Stats 8399.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7053929 bytes_read=3008581 bytes_retransmit=9 bytes_invalid=0 send_seq=182485 receive_seq=182485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.1 pwm=0.012 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=3199315 sysload=0.09 cputime=422.569 memavail=1626108 print_time=8410.487 buffer_time=2.118 print_stall=0 extruder: target=215 temp=215.1 pwm=0.467
Stats 8400.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7055849 bytes_read=3009132 bytes_retransmit=9 bytes_invalid=0 send_seq=182529 receive_seq=182529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=3200455 sysload=0.09 cputime=422.643 memavail=1626312 print_time=8411.557 buffer_time=2.187 print_stall=0 extruder: target=215 temp=214.9 pwm=0.543
Stats 8401.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7059175 bytes_read=3009743 bytes_retransmit=9 bytes_invalid=0 send_seq=182595 receive_seq=182595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.189 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=3202385 sysload=0.09 cputime=422.732 memavail=1626336 print_time=8412.677 buffer_time=2.306 print_stall=0 extruder: target=215 temp=215.0 pwm=0.507
Stats 8402.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7061229 bytes_read=3010235 bytes_retransmit=9 bytes_invalid=0 send_seq=182638 receive_seq=182638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.008 rpi: temp=57.0 mcu_temp: temp=43.2 sd_pos=3204030 sysload=0.08 cputime=422.811 memavail=1626600 print_time=8413.646 buffer_time=2.275 print_stall=0 extruder: target=215 temp=215.1 pwm=0.400
Stats 8403.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7063218 bytes_read=3010768 bytes_retransmit=9 bytes_invalid=0 send_seq=182681 receive_seq=182681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.402 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=3205747 sysload=0.08 cputime=422.894 memavail=1626360 print_time=8414.442 buffer_time=2.070 print_stall=0 extruder: target=215 temp=214.9 pwm=0.569
Stats 8404.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=7065100 bytes_read=3011271 bytes_retransmit=9 bytes_invalid=0 send_seq=182723 receive_seq=182723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=54.9 pwm=0.534 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3206807 sysload=0.08 cputime=422.965 memavail=1626360 print_time=8415.424 buffer_time=2.052 print_stall=0 extruder: target=215 temp=215.1 pwm=0.468
Stats 8405.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=7067864 bytes_read=3011831 bytes_retransmit=9 bytes_invalid=0 send_seq=182778 receive_seq=182778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.173 rpi: temp=57.5 mcu_temp: temp=43.1 sd_pos=3208855 sysload=0.08 cputime=423.049 memavail=1626112 print_time=8416.661 buffer_time=2.288 print_stall=0 extruder: target=215 temp=215.2 pwm=0.363
Stats 8406.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=7069053 bytes_read=3012307 bytes_retransmit=9 bytes_invalid=0 send_seq=182807 receive_seq=182807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996356 heater_bed: target=55 temp=55.0 pwm=0.246 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3209918 sysload=0.08 cputime=423.120 memavail=1625852 print_time=8417.427 buffer_time=2.053 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 8407.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=7070565 bytes_read=3012764 bytes_retransmit=9 bytes_invalid=0 send_seq=182841 receive_seq=182841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996361 heater_bed: target=55 temp=55.0 pwm=0.185 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=3211962 sysload=0.07 cputime=423.211 memavail=1625564 print_time=8418.533 buffer_time=2.159 print_stall=0 extruder: target=215 temp=215.0 pwm=0.537
Stats 8408.7: gcodein=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000027 mcu_task_stddev=0.000049 bytes_write=7072778 bytes_read=3013281 bytes_retransmit=9 bytes_invalid=0 send_seq=182887 receive_seq=182887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=71996358 heater_bed: target=55 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=3215253 sysload=0.07 cputime=423.313 memavail=1625308 print_time=8419.603 buffer_time=2.229 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 8409.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7075390 bytes_read=3013887 bytes_retransmit=9 bytes_invalid=0 send_seq=182939 receive_seq=182939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996355 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.0 sd_pos=3217112 sysload=0.07 cputime=423.403 memavail=1625468 print_time=8420.589 buffer_time=2.213 print_stall=0 extruder: target=215 temp=215.0 pwm=0.474
Stats 8410.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7078132 bytes_read=3014465 bytes_retransmit=9 bytes_invalid=0 send_seq=182995 receive_seq=182995 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=55 temp=55.0 pwm=0.069 rpi: temp=58.4 mcu_temp: temp=43.1 sd_pos=3218639 sysload=0.07 cputime=423.481 memavail=1625416 print_time=8421.803 buffer_time=2.426 print_stall=0 extruder: target=215 temp=215.1 pwm=0.474
Stats 8411.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7080295 bytes_read=3014982 bytes_retransmit=9 bytes_invalid=0 send_seq=183038 receive_seq=183038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996353 heater_bed: target=55 temp=55.0 pwm=0.306 rpi: temp=58.9 mcu_temp: temp=43.1 sd_pos=3220473 sysload=0.07 cputime=423.562 memavail=1625508 print_time=8422.532 buffer_time=2.155 print_stall=0 extruder: target=215 temp=215.2 pwm=0.371
Stats 8412.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7082342 bytes_read=3015518 bytes_retransmit=9 bytes_invalid=0 send_seq=183082 receive_seq=183082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=54.9 pwm=0.469 rpi: temp=57.9 mcu_temp: temp=42.8 sd_pos=3222406 sysload=0.07 cputime=423.633 memavail=1625196 print_time=8423.581 buffer_time=2.203 print_stall=0 extruder: target=215 temp=215.0 pwm=0.520
Stats 8413.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000052 bytes_write=7084417 bytes_read=3016030 bytes_retransmit=9 bytes_invalid=0 send_seq=183127 receive_seq=183127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=3223530 sysload=0.07 cputime=423.702 memavail=1625432 print_time=8424.575 buffer_time=2.196 print_stall=0 extruder: target=215 temp=215.0 pwm=0.534
Stats 8414.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=7086385 bytes_read=3016558 bytes_retransmit=9 bytes_invalid=0 send_seq=183169 receive_seq=183169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.270 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=3224972 sysload=0.07 cputime=423.780 memavail=1625388 print_time=8425.452 buffer_time=2.072 print_stall=0 extruder: target=215 temp=214.9 pwm=0.534
Stats 8415.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=7087826 bytes_read=3017034 bytes_retransmit=9 bytes_invalid=0 send_seq=183201 receive_seq=183201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.0 pwm=0.178 rpi: temp=58.4 mcu_temp: temp=43.0 sd_pos=3226269 sysload=0.07 cputime=423.863 memavail=1625160 print_time=8426.542 buffer_time=2.162 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 8416.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=7089123 bytes_read=3017486 bytes_retransmit=9 bytes_invalid=0 send_seq=183234 receive_seq=183234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.7 sd_pos=3227469 sysload=0.07 cputime=423.937 memavail=1624752 print_time=8427.413 buffer_time=2.032 print_stall=0 extruder: target=215 temp=215.0 pwm=0.491
Stats 8417.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=7091858 bytes_read=3018053 bytes_retransmit=9 bytes_invalid=0 send_seq=183287 receive_seq=183287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.304 rpi: temp=58.4 mcu_temp: temp=43.5 sd_pos=3230673 sysload=0.06 cputime=424.035 memavail=1624960 print_time=8428.614 buffer_time=2.233 print_stall=0 extruder: target=215 temp=215.1 pwm=0.422
Stats 8418.7: gcodein=0 mcu: mcu_awake=0.026 mcu_task_avg=0.000029 mcu_task_stddev=0.000058 bytes_write=7094611 bytes_read=3018644 bytes_retransmit=9 bytes_invalid=0 send_seq=183342 receive_seq=183342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=55.1 pwm=0.245 rpi: temp=58.4 mcu_temp: temp=42.9 sd_pos=3232701 sysload=0.06 cputime=424.126 memavail=1625460 print_time=8429.716 buffer_time=2.334 print_stall=0 extruder: target=215 temp=215.0 pwm=0.509
Stats 8419.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=7096101 bytes_read=3019122 bytes_retransmit=9 bytes_invalid=0 send_seq=183377 receive_seq=183377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.1 pwm=0.125 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=3233630 sysload=0.06 cputime=424.196 memavail=1625472 print_time=8430.389 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.9 pwm=0.565
Stats 8420.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=7098471 bytes_read=3019674 bytes_retransmit=9 bytes_invalid=0 send_seq=183427 receive_seq=183427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.222 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3236028 sysload=0.06 cputime=424.294 memavail=1625460 print_time=8431.628 buffer_time=2.245 print_stall=0 extruder: target=215 temp=215.0 pwm=0.533
Stats 8421.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=7100024 bytes_read=3020165 bytes_retransmit=9 bytes_invalid=0 send_seq=183462 receive_seq=183462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996345 heater_bed: target=55 temp=55.0 pwm=0.217 rpi: temp=58.4 mcu_temp: temp=42.9 sd_pos=3238159 sysload=0.06 cputime=424.383 memavail=1625180 print_time=8432.455 buffer_time=2.071 print_stall=0 extruder: target=215 temp=215.0 pwm=0.490
Stats 8422.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=7102417 bytes_read=3020697 bytes_retransmit=9 bytes_invalid=0 send_seq=183511 receive_seq=183511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=55 temp=54.9 pwm=0.460 rpi: temp=58.4 mcu_temp: temp=42.6 sd_pos=3240291 sysload=0.06 cputime=424.465 memavail=1625532 print_time=8433.473 buffer_time=2.088 print_stall=0 extruder: target=215 temp=214.9 pwm=0.560
Stats 8423.7: gcodein=0 mcu: mcu_awake=0.023 mcu_task_avg=0.000027 mcu_task_stddev=0.000053 bytes_write=7105031 bytes_read=3021269 bytes_retransmit=9 bytes_invalid=0 send_seq=183565 receive_seq=183565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.3 sd_pos=3241888 sysload=0.06 cputime=424.546 memavail=1625496 print_time=8434.483 buffer_time=2.098 print_stall=0 extruder: target=215 temp=215.0 pwm=0.482
Stats 8424.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=7107063 bytes_read=3021811 bytes_retransmit=9 bytes_invalid=0 send_seq=183607 receive_seq=183607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.251 rpi: temp=57.9 mcu_temp: temp=42.7 sd_pos=3244195 sysload=0.06 cputime=424.638 memavail=1625532 print_time=8435.677 buffer_time=2.291 print_stall=0 extruder: target=215 temp=214.8 pwm=0.570
Stats 8425.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=7108998 bytes_read=3022308 bytes_retransmit=9 bytes_invalid=0 send_seq=183649 receive_seq=183649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996352 heater_bed: target=55 temp=55.0 pwm=0.361 rpi: temp=58.4 mcu_temp: temp=42.8 sd_pos=3245636 sysload=0.06 cputime=424.711 memavail=1625756 print_time=8436.401 buffer_time=2.014 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 8426.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=7110591 bytes_read=3022785 bytes_retransmit=9 bytes_invalid=0 send_seq=183684 receive_seq=183684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=3247141 sysload=0.06 cputime=424.780 memavail=1625500 print_time=8437.525 buffer_time=2.138 print_stall=0 extruder: target=215 temp=214.9 pwm=0.493
Stats 8427.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=7112709 bytes_read=3023261 bytes_retransmit=9 bytes_invalid=0 send_seq=183728 receive_seq=183716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=199 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.433 rpi: temp=57.9 mcu_temp: temp=43.2 sd_pos=3249618 sysload=0.05 cputime=424.868 memavail=1625500 print_time=8438.740 buffer_time=2.352 print_stall=0 extruder: target=215 temp=215.0 pwm=0.493
Stats 8428.7: gcodein=0 mcu: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000048 bytes_write=7114454 bytes_read=3023808 bytes_retransmit=9 bytes_invalid=0 send_seq=183768 receive_seq=183768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=71996346 heater_bed: target=55 temp=55.0 pwm=0.157 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=3250968 sysload=0.05 cputime=424.943 memavail=1625448 print_time=8439.605 buffer_time=2.217 print_stall=0 extruder: target=215 temp=215.0 pwm=0.461
Stats 8429.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=7116084 bytes_read=3024305 bytes_retransmit=9 bytes_invalid=0 send_seq=183804 receive_seq=183804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996343 heater_bed: target=55 temp=55.0 pwm=0.202 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=3252648 sysload=0.05 cputime=425.017 memavail=1625440 print_time=8440.517 buffer_time=2.129 print_stall=0 extruder: target=215 temp=215.0 pwm=0.512
Stats 8430.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=7117697 bytes_read=3024796 bytes_retransmit=9 bytes_invalid=0 send_seq=183839 receive_seq=183839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=55 temp=55.1 pwm=0.047 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=3253982 sysload=0.05 cputime=425.092 memavail=1625412 print_time=8441.404 buffer_time=2.016 print_stall=0 extruder: target=215 temp=214.9 pwm=0.536
Stats 8431.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=7119123 bytes_read=3025248 bytes_retransmit=9 bytes_invalid=0 send_seq=183872 receive_seq=183872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=55 temp=55.0 pwm=0.462 rpi: temp=57.9 mcu_temp: temp=42.9 sd_pos=3255492 sysload=0.05 cputime=425.172 memavail=1625356 print_time=8442.513 buffer_time=2.124 print_stall=0 extruder: target=215 temp=215.0 pwm=0.497
Stats 8432.7: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=7121103 bytes_read=3025750 bytes_retransmit=9 bytes_invalid=0 send_seq=183912 receive_seq=183912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=71996349 heater_bed: target=55 temp=55.0 pwm=0.080 rpi: temp=57.9 mcu_temp: temp=43.0 sd_pos=3257116 sysload=0.05 cputime=425.247 memavail=1625332 print_time=8443.620 buffer_time=2.230 print_stall=0 extruder: target=215 temp=215.0 pwm=0.497
Stats 8433.8: gcodein=0 mcu: mcu_awake=0.021 mcu_task_avg=0.000026 mcu_task_stddev=0.000047 bytes_write=7122157 bytes_read=3026196 bytes_retransmit=9 bytes_invalid=0 send_seq=183938 receive_seq=183938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996351 heater_bed: target=55 temp=55.0 pwm=0.292 rpi: temp=57.5 mcu_temp: temp=43.3 sd_pos=3257918 sysload=0.05 cputime=425.312 memavail=1625548 print_time=8444.396 buffer_time=2.006 print_stall=0 extruder: target=215 temp=214.9 pwm=0.568
Stats 8434.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=7124352 bytes_read=3026733 bytes_retransmit=9 bytes_invalid=0 send_seq=183985 receive_seq=183985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.291 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=3260097 sysload=0.05 cputime=425.400 memavail=1625364 print_time=8445.679 buffer_time=2.289 print_stall=0 extruder: target=215 temp=215.0 pwm=0.480
Stats 8435.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=7126195 bytes_read=3027235 bytes_retransmit=9 bytes_invalid=0 send_seq=184025 receive_seq=184025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=54.9 pwm=0.736 rpi: temp=57.9 mcu_temp: temp=42.2 sd_pos=3261860 sysload=0.05 cputime=425.480 memavail=1625680 print_time=8446.639 buffer_time=2.249 print_stall=0 extruder: target=215 temp=215.1 pwm=0.459
Stats 8436.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=7128077 bytes_read=3027756 bytes_retransmit=9 bytes_invalid=0 send_seq=184066 receive_seq=184066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=71996350 heater_bed: target=55 temp=55.0 pwm=0.311 rpi: temp=57.5 mcu_temp: temp=42.9 sd_pos=3263310 sysload=0.05 cputime=425.556 memavail=1625464 print_time=8447.414 buffer_time=2.021 print_stall=0 extruder: target=215 temp=214.9 pwm=0.579
Stats 8437.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=7129024 bytes_read=3028163 bytes_retransmit=9 bytes_invalid=0 send_seq=184090 receive_seq=184090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=0 temp=55.1 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.2 sd_pos=3263868 sysload=0.04 cputime=425.621 memavail=1625436 print_time=8449.659 buffer_time=3.263 print_stall=0 extruder: target=0 temp=215.0 pwm=0.000
Stats 8438.8: gcodein=0 mcu: mcu_awake=0.019 mcu_task_avg=0.000025 mcu_task_stddev=0.000052 bytes_write=7129142 bytes_read=3028510 bytes_retransmit=9 bytes_invalid=0 send_seq=184099 receive_seq=184099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=3263868 sysload=0.04 cputime=425.669 memavail=1625556 print_time=8449.659 buffer_time=2.262 print_stall=0 extruder: target=0 temp=215.1 pwm=0.000
Stats 8439.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=7129690 bytes_read=3028931 bytes_retransmit=9 bytes_invalid=0 send_seq=184117 receive_seq=184117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.1 sd_pos=3263868 sysload=0.04 cputime=425.724 memavail=1625780 print_time=8451.179 buffer_time=2.782 print_stall=0 extruder: target=0 temp=214.9 pwm=0.000
Stats 8440.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=7129898 bytes_read=3029273 bytes_retransmit=9 bytes_invalid=0 send_seq=184128 receive_seq=184128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=54.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.5 sd_pos=3263868 sysload=0.04 cputime=425.778 memavail=1625288 print_time=8451.579 buffer_time=2.182 print_stall=0 extruder: target=0 temp=214.8 pwm=0.000
Stats 8441.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=7130229 bytes_read=3029635 bytes_retransmit=9 bytes_invalid=0 send_seq=184140 receive_seq=184140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.6 sd_pos=3263868 sysload=0.04 cputime=425.829 memavail=1625244 print_time=8452.574 buffer_time=2.176 print_stall=0 extruder: target=0 temp=214.6 pwm=0.000
Finished SD card print
Exiting SD card print (position 3276424)
Stats 8442.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=7130295 bytes_read=3029858 bytes_retransmit=9 bytes_invalid=0 send_seq=184143 receive_seq=184143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.3  sysload=0.04 cputime=425.898 memavail=1625484 print_time=8452.674 buffer_time=1.276 print_stall=0 extruder: target=0 temp=214.4 pwm=0.000
Stats 8443.8: gcodein=0 mcu: mcu_awake=0.018 mcu_task_avg=0.000025 mcu_task_stddev=0.000055 bytes_write=7130320 bytes_read=3030011 bytes_retransmit=9 bytes_invalid=0 send_seq=184145 receive_seq=184145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=55.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.2  sysload=0.04 cputime=425.931 memavail=1625572 print_time=8452.674 buffer_time=0.275 print_stall=0 extruder: target=0 temp=214.1 pwm=0.000
Stats 8444.8: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=7130396 bytes_read=3030199 bytes_retransmit=9 bytes_invalid=0 send_seq=184148 receive_seq=184148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=0 temp=54.7 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.6  sysload=0.04 cputime=425.964 memavail=1625792 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.4 pwm=0.000
Stats 8445.8: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=7130402 bytes_read=3030376 bytes_retransmit=9 bytes_invalid=0 send_seq=184149 receive_seq=184149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.2  sysload=0.04 cputime=425.995 memavail=1625832 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.2 pwm=0.000
Stats 8446.8: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=7130432 bytes_read=3030534 bytes_retransmit=9 bytes_invalid=0 send_seq=184152 receive_seq=184152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.5  sysload=0.04 cputime=426.022 memavail=1626376 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.7 pwm=0.000
Stats 8447.8: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=7130438 bytes_read=3030697 bytes_retransmit=9 bytes_invalid=0 send_seq=184153 receive_seq=184153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=0 temp=54.5 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.3  sysload=0.04 cputime=426.049 memavail=1626624 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.3 pwm=0.000
Stats 8448.8: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=7130468 bytes_read=3030884 bytes_retransmit=9 bytes_invalid=0 send_seq=184156 receive_seq=184156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=0 temp=54.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.3  sysload=0.04 cputime=426.082 memavail=1626624 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.5 pwm=0.000
Stats 8449.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=7130512 bytes_read=3031057 bytes_retransmit=9 bytes_invalid=0 send_seq=184159 receive_seq=184159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.1  sysload=0.04 cputime=426.115 memavail=1626320 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.9 pwm=0.000
Stats 8450.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=7130518 bytes_read=3031220 bytes_retransmit=9 bytes_invalid=0 send_seq=184160 receive_seq=184160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996347 heater_bed: target=0 temp=54.4 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.7  sysload=0.04 cputime=426.146 memavail=1626308 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.3 pwm=0.000
Stats 8451.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=7130543 bytes_read=3031402 bytes_retransmit=9 bytes_invalid=0 send_seq=184162 receive_seq=184162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=0 temp=54.2 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.3  sysload=0.04 cputime=426.178 memavail=1626576 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.5 pwm=0.000
Stats 8452.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=7130572 bytes_read=3031555 bytes_retransmit=9 bytes_invalid=0 send_seq=184164 receive_seq=184164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=0 temp=54.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.2  sysload=0.03 cputime=426.209 memavail=1626652 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.7 pwm=0.000
Stats 8453.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000040 bytes_write=7130578 bytes_read=3031718 bytes_retransmit=9 bytes_invalid=0 send_seq=184165 receive_seq=184165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=0 temp=54.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.5  sysload=0.03 cputime=426.240 memavail=1626500 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.0 pwm=0.000
Stats 8454.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7130608 bytes_read=3031920 bytes_retransmit=9 bytes_invalid=0 send_seq=184168 receive_seq=184168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=0 temp=54.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.6  sysload=0.03 cputime=426.272 memavail=1626876 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.0 pwm=0.000
Stats 8455.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7130638 bytes_read=3032078 bytes_retransmit=9 bytes_invalid=0 send_seq=184171 receive_seq=184171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=44.0  sysload=0.03 cputime=426.302 memavail=1626844 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.4 pwm=0.000
Stats 8456.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7130663 bytes_read=3032261 bytes_retransmit=9 bytes_invalid=0 send_seq=184173 receive_seq=184173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=54.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.5  sysload=0.03 cputime=426.332 memavail=1625900 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.5 pwm=0.000
Stats 8457.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7130688 bytes_read=3032428 bytes_retransmit=9 bytes_invalid=0 send_seq=184175 receive_seq=184175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.6  sysload=0.03 cputime=426.364 memavail=1625560 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.4 pwm=0.000
Stats 8458.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7130713 bytes_read=3032581 bytes_retransmit=9 bytes_invalid=0 send_seq=184177 receive_seq=184177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.4  sysload=0.03 cputime=426.394 memavail=1625572 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.6 pwm=0.000
Stats 8459.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=7130738 bytes_read=3032779 bytes_retransmit=9 bytes_invalid=0 send_seq=184179 receive_seq=184179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=53.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.4  sysload=0.03 cputime=426.426 memavail=1625528 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.8 pwm=0.000
Stats 8460.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=7130744 bytes_read=3032941 bytes_retransmit=9 bytes_invalid=0 send_seq=184180 receive_seq=184180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.0 mcu_temp: temp=43.6  sysload=0.03 cputime=426.454 memavail=1625764 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.7 pwm=0.000
Stats 8461.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=7130769 bytes_read=3033085 bytes_retransmit=9 bytes_invalid=0 send_seq=184182 receive_seq=184182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=0 temp=53.7 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.4  sysload=0.03 cputime=426.480 memavail=1625684 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.0 pwm=0.000
Stats 8462.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=7130799 bytes_read=3033261 bytes_retransmit=9 bytes_invalid=0 send_seq=184185 receive_seq=184185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996340 heater_bed: target=0 temp=53.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.4  sysload=0.03 cputime=426.513 memavail=1625740 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.0 pwm=0.000
Stats 8463.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=7130829 bytes_read=3033422 bytes_retransmit=9 bytes_invalid=0 send_seq=184188 receive_seq=184188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.4  sysload=0.03 cputime=426.546 memavail=1625384 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.9 pwm=0.000
Stats 8464.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=7130863 bytes_read=3033588 bytes_retransmit=9 bytes_invalid=0 send_seq=184191 receive_seq=184191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=0 temp=53.5 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.3  sysload=0.03 cputime=426.579 memavail=1625384 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.1 pwm=0.000
Stats 8465.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=7130907 bytes_read=3033776 bytes_retransmit=9 bytes_invalid=0 send_seq=184194 receive_seq=184194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=0 temp=53.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=43.2  sysload=0.03 cputime=426.613 memavail=1625468 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.3 pwm=0.000
Stats 8466.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=7130932 bytes_read=3033943 bytes_retransmit=9 bytes_invalid=0 send_seq=184196 receive_seq=184196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=53.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.5  sysload=0.03 cputime=426.640 memavail=1625064 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.2 pwm=0.000
Stats 8467.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=7130957 bytes_read=3034096 bytes_retransmit=9 bytes_invalid=0 send_seq=184198 receive_seq=184198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996346 heater_bed: target=0 temp=53.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.2  sysload=0.11 cputime=426.666 memavail=1625360 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.4 pwm=0.000
Stats 8468.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=7130987 bytes_read=3034284 bytes_retransmit=9 bytes_invalid=0 send_seq=184201 receive_seq=184201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=52.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.2  sysload=0.11 cputime=426.698 memavail=1625416 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.4 pwm=0.000
Stats 8469.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=7131012 bytes_read=3034466 bytes_retransmit=9 bytes_invalid=0 send_seq=184203 receive_seq=184203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=52.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.2  sysload=0.11 cputime=426.731 memavail=1625360 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.2 pwm=0.000
Stats 8470.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=7131037 bytes_read=3034619 bytes_retransmit=9 bytes_invalid=0 send_seq=184205 receive_seq=184205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=0 temp=52.6 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.2  sysload=0.11 cputime=426.761 memavail=1625300 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.4 pwm=0.000
Stats 8471.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=7131073 bytes_read=3034823 bytes_retransmit=9 bytes_invalid=0 send_seq=184209 receive_seq=184209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=0 temp=52.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.2  sysload=0.11 cputime=426.792 memavail=1625156 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.6 pwm=0.000
Stats 8472.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=7131098 bytes_read=3034990 bytes_retransmit=9 bytes_invalid=0 send_seq=184211 receive_seq=184211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=52.3 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=43.2  sysload=0.10 cputime=426.823 memavail=1625260 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.5 pwm=0.000
webhooks client 3041533824: Disconnected
Stats 8473.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=7131142 bytes_read=3035148 bytes_retransmit=9 bytes_invalid=0 send_seq=184214 receive_seq=184214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996345 heater_bed: target=0 temp=52.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.5  sysload=0.10 cputime=426.855 memavail=1625576 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.6 pwm=0.000
Stats 8474.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7131171 bytes_read=3035346 bytes_retransmit=9 bytes_invalid=0 send_seq=184216 receive_seq=184216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=52.3 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.1  sysload=0.10 cputime=426.870 memavail=1626452 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.8 pwm=0.000
webhooks client 3042996792: New connection
webhooks client 3042996792: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3042996792
webhooks: registering remote method 'reboot_machine' for connection id: 3042996792
webhooks: registering remote method 'pause_job_queue' for connection id: 3042996792
webhooks: registering remote method 'start_job_queue' for connection id: 3042996792
Stats 8475.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7131201 bytes_read=3035518 bytes_retransmit=9 bytes_invalid=0 send_seq=184219 receive_seq=184219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=0 temp=52.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.7  sysload=0.10 cputime=426.907 memavail=1626024 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.6 pwm=0.000
Stats 8476.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7131226 bytes_read=3035671 bytes_retransmit=9 bytes_invalid=0 send_seq=184221 receive_seq=184221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=0 temp=52.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.9  sysload=0.10 cputime=426.947 memavail=1625992 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.6 pwm=0.000
Stats 8477.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7131232 bytes_read=3035849 bytes_retransmit=9 bytes_invalid=0 send_seq=184222 receive_seq=184222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996342 heater_bed: target=0 temp=52.0 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=42.7  sysload=0.09 cputime=426.977 memavail=1626500 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.9 pwm=0.000
Stats 8478.8: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7131281 bytes_read=3036026 bytes_retransmit=9 bytes_invalid=0 send_seq=184226 receive_seq=184226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996341 heater_bed: target=0 temp=52.1 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=43.1  sysload=0.09 cputime=427.009 memavail=1626152 print_time=8452.674 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.7 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-218-gf8afe49a'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 11:38:30 2021 (1640947110.2 8479.6)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3042062048: New connection
webhooks client 3042062048: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
mcu 'mcu': got {'#receive_time': 8480.740282334, u'next_clock': 1370883968, u'oid': 17, u'value': 28448, '#name': u'analog_in_state', '#sent_time': 8480.72118113}
mcu 'mcu': got {'#receive_time': 8480.770312037, u'next_clock': 1373043968, u'oid': 20, u'value': 13446, '#name': u'analog_in_state', '#sent_time': 8480.72118113}
mcu 'mcu': got {'#receive_time': 8480.830258037, u'next_clock': 1377363968, u'oid': 26, u'value': 4679, '#name': u'analog_in_state', '#sent_time': 8480.823456704}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3042062048
webhooks: registering remote method 'reboot_machine' for connection id: 3042062048
webhooks: registering remote method 'pause_job_queue' for connection id: 3042062048
webhooks: registering remote method 'start_job_queue' for connection id: 3042062048
Stats 8483.4: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7425 bytes_read=5978 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.002 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996219 heater_bed: target=0 temp=51.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=42.5  sysload=0.08 cputime=1.457 memavail=1627448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.6 pwm=0.000
Stats 8484.4: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000058 mcu_task_stddev=0.000146 bytes_write=7455 bytes_read=6168 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996031 heater_bed: target=0 temp=51.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=42.3  sysload=0.08 cputime=1.480 memavail=1627012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.7 pwm=0.000
Stats 8485.4: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000058 mcu_task_stddev=0.000146 bytes_write=7461 bytes_read=6345 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996252 heater_bed: target=0 temp=51.7 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.3  sysload=0.08 cputime=1.512 memavail=1626648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.6 pwm=0.000
Stats 8486.4: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000058 mcu_task_stddev=0.000146 bytes_write=7495 bytes_read=6503 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996272 heater_bed: target=0 temp=51.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=42.1  sysload=0.08 cputime=1.542 memavail=1626396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.8 pwm=0.000
Stats 8487.4: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000058 mcu_task_stddev=0.000146 bytes_write=7539 bytes_read=6676 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996493 heater_bed: target=0 temp=51.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=43.2  sysload=0.07 cputime=1.574 memavail=1626656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.1 pwm=0.000
Stats 8488.4: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000058 mcu_task_stddev=0.000146 bytes_write=7569 bytes_read=6863 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=51.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.8  sysload=0.07 cputime=1.604 memavail=1627016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.9 pwm=0.000
Stats 8489.4: gcodein=0 mcu: mcu_awake=0.063 mcu_task_avg=0.000058 mcu_task_stddev=0.000146 bytes_write=7599 bytes_read=7021 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=51.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.3  sysload=0.07 cputime=1.634 memavail=1626828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.1 pwm=0.000
Stats 8490.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7629 bytes_read=7209 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996335 heater_bed: target=0 temp=51.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.1  sysload=0.07 cputime=1.664 memavail=1626768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.3 pwm=0.000
Stats 8491.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7654 bytes_read=7391 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996328 heater_bed: target=0 temp=51.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.0  sysload=0.07 cputime=1.695 memavail=1626656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.2 pwm=0.000
Stats 8492.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7660 bytes_read=7539 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996343 heater_bed: target=0 temp=50.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.5  sysload=0.07 cputime=1.726 memavail=1626596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.4 pwm=0.000
Stats 8493.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7685 bytes_read=7707 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996344 heater_bed: target=0 temp=50.8 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=41.8  sysload=0.07 cputime=1.758 memavail=1626596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.6 pwm=0.000
Stats 8494.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=7715 bytes_read=7894 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=0 temp=50.9 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.3  sysload=0.07 cputime=1.789 memavail=1626420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.6 pwm=0.000
Stats 8495.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7745 bytes_read=8067 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=50.9 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.2  sysload=0.07 cputime=1.823 memavail=1626428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.8 pwm=0.000
Stats 8496.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7775 bytes_read=8240 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996414 heater_bed: target=0 temp=50.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=42.4  sysload=0.07 cputime=1.857 memavail=1626204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.1 pwm=0.000
Stats 8497.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7804 bytes_read=8422 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=50.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=41.7  sysload=0.06 cputime=1.889 memavail=1626488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.1 pwm=0.000
Stats 8498.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7834 bytes_read=8580 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996423 heater_bed: target=0 temp=50.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=41.5  sysload=0.06 cputime=1.921 memavail=1626488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.3 pwm=0.000
Stats 8499.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7859 bytes_read=8748 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=50.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=42.3  sysload=0.06 cputime=1.952 memavail=1626112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.6 pwm=0.000
Stats 8500.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7884 bytes_read=8945 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=0 temp=50.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=41.7  sysload=0.06 cputime=1.982 memavail=1626104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.5 pwm=0.000
Stats 8501.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7914 bytes_read=9103 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=0 temp=50.4 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=41.8  sysload=0.06 cputime=2.012 memavail=1626164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.0 pwm=0.000
Stats 8502.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7944 bytes_read=9276 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=50.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=41.3  sysload=0.06 cputime=2.044 memavail=1626164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.1 pwm=0.000
Stats 8503.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7974 bytes_read=9463 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=50.4 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=41.5  sysload=0.06 cputime=2.075 memavail=1626420 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.2 pwm=0.000
Stats 8504.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=7980 bytes_read=9611 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=0 temp=49.8 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=42.0  sysload=0.06 cputime=2.103 memavail=1626120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.4 pwm=0.000
Stats 8505.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8010 bytes_read=9798 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=0 temp=50.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=41.4  sysload=0.06 cputime=2.134 memavail=1626128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.7 pwm=0.000
Stats 8506.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8040 bytes_read=9985 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996356 heater_bed: target=0 temp=49.9 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=42.0  sysload=0.06 cputime=2.164 memavail=1626432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.7 pwm=0.000
Stats 8507.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8070 bytes_read=10143 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996354 heater_bed: target=0 temp=49.7 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=40.8  sysload=0.05 cputime=2.194 memavail=1626432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.1 pwm=0.000
Stats 8508.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8100 bytes_read=10331 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=0 temp=49.6 pwm=0.000 rpi: temp=57.5 mcu_temp: temp=41.1  sysload=0.05 cputime=2.226 memavail=1626132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.3 pwm=0.000
Stats 8509.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8134 bytes_read=10503 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996349 heater_bed: target=0 temp=49.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=42.1  sysload=0.05 cputime=2.256 memavail=1626392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.5 pwm=0.000
Stats 8510.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8168 bytes_read=10676 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=49.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=40.8  sysload=0.05 cputime=2.287 memavail=1626628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.8 pwm=0.000
Stats 8511.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8198 bytes_read=10864 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996348 heater_bed: target=0 temp=49.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.6  sysload=0.05 cputime=2.317 memavail=1626628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.1 pwm=0.000
Stats 8512.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8274 bytes_read=11046 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996350 heater_bed: target=0 temp=49.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.6  sysload=0.05 cputime=2.348 memavail=1626944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.1 pwm=0.000
Stats 8513.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8299 bytes_read=11199 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996365 heater_bed: target=0 temp=49.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=40.3  sysload=0.05 cputime=2.377 memavail=1627000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.6 pwm=0.000
Stats 8514.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8305 bytes_read=11377 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=48.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=41.1  sysload=0.05 cputime=2.400 memavail=1626448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.8 pwm=0.000
Stats 8515.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=8330 bytes_read=11559 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=49.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=41.2  sysload=0.05 cputime=2.431 memavail=1626448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.0 pwm=0.000
Stats 8516.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=8360 bytes_read=11717 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=48.6 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=40.7  sysload=0.05 cputime=2.462 memavail=1626700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.2 pwm=0.000
Stats 8517.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=8390 bytes_read=11905 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=0 temp=48.7 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.2  sysload=0.04 cputime=2.493 memavail=1626760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.6 pwm=0.000
Stats 8518.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=8396 bytes_read=12067 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=0 temp=48.7 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.0  sysload=0.04 cputime=2.523 memavail=1627012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.8 pwm=0.000
Stats 8519.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=8426 bytes_read=12225 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=0 temp=48.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=40.6  sysload=0.04 cputime=2.554 memavail=1627328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.2 pwm=0.000
Stats 8520.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=8451 bytes_read=12422 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=0 temp=48.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.9  sysload=0.04 cputime=2.584 memavail=1627216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.6 pwm=0.000
Stats 8521.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=8457 bytes_read=12574 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.5  sysload=0.04 cputime=2.612 memavail=1627224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.7 pwm=0.000
Stats 8522.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=8501 bytes_read=12722 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=40.0  sysload=0.04 cputime=2.643 memavail=1627216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.1 pwm=0.000
Stats 8523.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=8541 bytes_read=12913 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=40.0  sysload=0.04 cputime=2.675 memavail=1627528 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.4 pwm=0.000
Stats 8524.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=8571 bytes_read=13077 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.6  sysload=0.04 cputime=2.698 memavail=1627280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.5 pwm=0.000
Stats 8525.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=8577 bytes_read=13240 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=0 temp=48.4 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=40.0  sysload=0.04 cputime=2.727 memavail=1627028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.0 pwm=0.000
Stats 8526.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=8607 bytes_read=13428 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.9  sysload=0.04 cputime=2.757 memavail=1627288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.3 pwm=0.000
Stats 8527.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=8637 bytes_read=13600 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.7  sysload=0.04 cputime=2.788 memavail=1627288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.4 pwm=0.000
Stats 8528.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=8643 bytes_read=13748 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=40.1  sysload=0.04 cputime=2.819 memavail=1627040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.8 pwm=0.000
Stats 8529.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=8668 bytes_read=13931 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=0 temp=48.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.7  sysload=0.04 cputime=2.851 memavail=1627040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.3 pwm=0.000
Stats 8530.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8693 bytes_read=14112 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=0 temp=48.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.5  sysload=0.04 cputime=2.882 memavail=1627360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.4 pwm=0.000
Stats 8531.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8699 bytes_read=14260 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.6  sysload=0.04 cputime=2.913 memavail=1627108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.8 pwm=0.000
Stats 8532.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8724 bytes_read=14443 bytes_retransmit=9 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=0 temp=47.9 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.6  sysload=0.03 cputime=2.944 memavail=1627048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.3 pwm=0.000
Stats 8533.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8754 bytes_read=14615 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=0 temp=47.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.5  sysload=0.03 cputime=2.974 memavail=1627048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.4 pwm=0.000
Stats 8534.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=8760 bytes_read=14763 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=0 temp=47.7 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.5  sysload=0.03 cputime=3.004 memavail=1627548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.8 pwm=0.000
Stats 8535.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=8785 bytes_read=14961 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=0 temp=47.7 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=39.3  sysload=0.03 cputime=3.034 memavail=1627548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000
Stats 8536.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=8815 bytes_read=15133 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=39.0  sysload=0.03 cputime=3.064 memavail=1627552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.5 pwm=0.000
Stats 8537.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=8821 bytes_read=15281 bytes_retransmit=9 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996364 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.3  sysload=0.03 cputime=3.095 memavail=1627604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.9 pwm=0.000
Stats 8538.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=8855 bytes_read=15469 bytes_retransmit=9 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996363 heater_bed: target=0 temp=47.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.7  sysload=0.03 cputime=3.126 memavail=1627248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.3 pwm=0.000
Stats 8539.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=8885 bytes_read=15641 bytes_retransmit=9 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996362 heater_bed: target=0 temp=47.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.3  sysload=0.03 cputime=3.155 memavail=1627248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.6 pwm=0.000
Stats 8540.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8915 bytes_read=15814 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996367 heater_bed: target=0 temp=47.4 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.3  sysload=0.03 cputime=3.184 memavail=1627248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.0 pwm=0.000
Stats 8541.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8940 bytes_read=15997 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996366 heater_bed: target=0 temp=47.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=39.2  sysload=0.03 cputime=3.215 memavail=1627508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.5 pwm=0.000
Stats 8542.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8946 bytes_read=16159 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=0 temp=47.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.3  sysload=0.11 cputime=3.243 memavail=1627252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.7 pwm=0.000
Stats 8543.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8976 bytes_read=16317 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=0 temp=47.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.0  sysload=0.11 cputime=3.272 memavail=1627256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.1 pwm=0.000
Stats 8544.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9001 bytes_read=16500 bytes_retransmit=9 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=0 temp=47.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.0  sysload=0.11 cputime=3.303 memavail=1627628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.6 pwm=0.000
Stats 8545.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9007 bytes_read=16676 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=0 temp=47.0 pwm=0.000 rpi: temp=57.9 mcu_temp: temp=39.2  sysload=0.11 cputime=3.334 memavail=1627884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.8 pwm=0.000
Stats 8546.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9037 bytes_read=16834 bytes_retransmit=9 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=39.2  sysload=0.11 cputime=3.365 memavail=1627948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.3 pwm=0.000
Stats 8547.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9067 bytes_read=17022 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=38.8  sysload=0.10 cputime=3.395 memavail=1628144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.8 pwm=0.000
Stats 8548.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9073 bytes_read=17184 bytes_retransmit=9 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.9  sysload=0.10 cputime=3.424 memavail=1628460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.0 pwm=0.000
Stats 8549.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9103 bytes_read=17342 bytes_retransmit=9 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.8  sysload=0.10 cputime=3.454 memavail=1628648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.5 pwm=0.000
Stats 8550.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9109 bytes_read=17534 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=0 temp=46.9 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.8  sysload=0.10 cputime=3.484 memavail=1628460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.0 pwm=0.000
Stats 8551.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9139 bytes_read=17706 bytes_retransmit=9 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.5  sysload=0.10 cputime=3.515 memavail=1628708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.2 pwm=0.000
Stats 8552.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9169 bytes_read=17864 bytes_retransmit=9 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.9  sysload=0.09 cputime=3.545 memavail=1628708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.6 pwm=0.000
Stats 8553.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9175 bytes_read=18042 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=38.6  sysload=0.09 cputime=3.575 memavail=1628712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.2 pwm=0.000
Stats 8554.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9209 bytes_read=18215 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996378 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.8  sysload=0.09 cputime=3.604 memavail=1628776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.4 pwm=0.000
Stats 8555.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9239 bytes_read=18391 bytes_retransmit=9 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=0 temp=46.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.7  sysload=0.09 cputime=3.635 memavail=1628404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.9 pwm=0.000
Stats 8556.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9245 bytes_read=18572 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996375 heater_bed: target=0 temp=46.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.4  sysload=0.09 cputime=3.665 memavail=1628656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.3 pwm=0.000
Stats 8557.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9275 bytes_read=18748 bytes_retransmit=9 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=46.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=38.2  sysload=0.24 cputime=3.695 memavail=1628216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.7 pwm=0.000
Stats 8558.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9281 bytes_read=18899 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996376 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.6  sysload=0.24 cputime=3.725 memavail=1628220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.2 pwm=0.000
Stats 8559.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9311 bytes_read=19090 bytes_retransmit=9 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.7  sysload=0.24 cputime=3.756 memavail=1628284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.6 pwm=0.000
Stats 8560.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9317 bytes_read=19270 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=46.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.6  sysload=0.24 cputime=3.785 memavail=1628536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.9 pwm=0.000
Stats 8561.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9342 bytes_read=19426 bytes_retransmit=9 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=46.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.4  sysload=0.24 cputime=3.813 memavail=1628476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.4 pwm=0.000
Stats 8562.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9367 bytes_read=19612 bytes_retransmit=9 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996373 heater_bed: target=0 temp=46.2 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=38.1  sysload=0.22 cputime=3.843 memavail=1628236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.8 pwm=0.000
Stats 8563.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9397 bytes_read=19788 bytes_retransmit=9 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=0 temp=46.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=38.1  sysload=0.22 cputime=3.873 memavail=1628148 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.2 pwm=0.000
Stats 8564.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=9427 bytes_read=19949 bytes_retransmit=9 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996370 heater_bed: target=0 temp=45.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.2  sysload=0.22 cputime=3.895 memavail=1627424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.6 pwm=0.000
Stats 8565.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=9433 bytes_read=20145 bytes_retransmit=9 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=0 temp=45.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.3  sysload=0.22 cputime=3.928 memavail=1627676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.3 pwm=0.000
Stats 8566.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=9463 bytes_read=20321 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=0 temp=45.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=38.0  sysload=0.22 cputime=3.958 memavail=1627368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.6 pwm=0.000
Stats 8567.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=9469 bytes_read=20472 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=0 temp=45.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.9  sysload=0.21 cputime=3.987 memavail=1627580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.1 pwm=0.000
Stats 8568.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=9494 bytes_read=20658 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=0 temp=45.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=38.1  sysload=0.21 cputime=4.018 memavail=1627400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.6 pwm=0.000
Stats 8569.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=9500 bytes_read=20824 bytes_retransmit=9 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996368 heater_bed: target=0 temp=45.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.4  sysload=0.21 cputime=4.048 memavail=1627320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.0 pwm=0.000
Stats 8570.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9544 bytes_read=21000 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996369 heater_bed: target=0 temp=45.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=37.9  sysload=0.21 cputime=4.080 memavail=1627380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.4 pwm=0.000
Stats 8571.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9550 bytes_read=21181 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996371 heater_bed: target=0 temp=44.9 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=37.6  sysload=0.21 cputime=4.112 memavail=1627128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.0 pwm=0.000
Stats 8572.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9579 bytes_read=21352 bytes_retransmit=9 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996372 heater_bed: target=0 temp=45.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.4  sysload=0.19 cputime=4.143 memavail=1627264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.3 pwm=0.000
Stats 8573.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9604 bytes_read=21508 bytes_retransmit=9 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=45.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.4  sysload=0.19 cputime=4.174 memavail=1627328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.8 pwm=0.000
Stats 8574.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9610 bytes_read=21689 bytes_retransmit=9 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=44.9 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=37.4  sysload=0.19 cputime=4.203 memavail=1627572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.4 pwm=0.000
Stats 8575.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9640 bytes_read=21880 bytes_retransmit=9 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996374 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=37.7  sysload=0.19 cputime=4.234 memavail=1627572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.8 pwm=0.000
Stats 8576.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9646 bytes_read=22031 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=44.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.8  sysload=0.19 cputime=4.265 memavail=1627580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.3 pwm=0.000
Stats 8577.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9676 bytes_read=22222 bytes_retransmit=9 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996377 heater_bed: target=0 temp=44.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.3  sysload=0.17 cputime=4.295 memavail=1627628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.7 pwm=0.000
Stats 8578.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9682 bytes_read=22388 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.1  sysload=0.17 cputime=4.324 memavail=1627388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.1 pwm=0.000
Stats 8579.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=9712 bytes_read=22549 bytes_retransmit=9 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996379 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=37.3  sysload=0.17 cputime=4.354 memavail=1627332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.6 pwm=0.000
Stats 8580.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=9718 bytes_read=22741 bytes_retransmit=9 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996382 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=37.4  sysload=0.17 cputime=4.384 memavail=1627080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.3 pwm=0.000
Stats 8581.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=9748 bytes_read=22906 bytes_retransmit=9 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=44.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=37.4  sysload=0.17 cputime=4.413 memavail=1626828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.6 pwm=0.000
Stats 8582.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=9778 bytes_read=23057 bytes_retransmit=9 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=44.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.2  sysload=0.16 cputime=4.442 memavail=1626592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.2 pwm=0.000
Stats 8583.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=9808 bytes_read=23236 bytes_retransmit=9 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996381 heater_bed: target=0 temp=44.4 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=37.3  sysload=0.16 cputime=4.471 memavail=1626892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.7 pwm=0.000
Stats 8584.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=9820 bytes_read=23413 bytes_retransmit=9 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=44.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=37.3  sysload=0.16 cputime=4.502 memavail=1627720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.4 pwm=0.000
Stats 8585.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9845 bytes_read=23584 bytes_retransmit=9 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=44.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.5  sysload=0.16 cputime=4.533 memavail=1627564 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.6 pwm=0.000
Stats 8586.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9851 bytes_read=23765 bytes_retransmit=9 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=44.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.8  sysload=0.16 cputime=4.561 memavail=1627532 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.2 pwm=0.000
Stats 8587.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9876 bytes_read=23936 bytes_retransmit=9 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=44.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=36.9  sysload=0.31 cputime=4.591 memavail=1627596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.7 pwm=0.000
Stats 8588.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9882 bytes_read=24087 bytes_retransmit=9 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=43.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.6  sysload=0.31 cputime=4.621 memavail=1627592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.2 pwm=0.000
Stats 8589.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9907 bytes_read=24273 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=43.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=37.0  sysload=0.31 cputime=4.651 memavail=1627400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.2 pwm=0.000
Stats 8590.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9913 bytes_read=24439 bytes_retransmit=9 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=43.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.1  sysload=0.31 cputime=4.679 memavail=1627912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.2 pwm=0.000
Stats 8591.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=9919 bytes_read=24604 bytes_retransmit=9 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=44.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=37.1  sysload=0.31 cputime=4.707 memavail=1628220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.9 pwm=0.000
Stats 8592.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=9953 bytes_read=24795 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=43.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=37.1  sysload=0.36 cputime=4.738 memavail=1628360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.4 pwm=0.000
Stats 8593.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=9983 bytes_read=24971 bytes_retransmit=9 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=43.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.9  sysload=0.36 cputime=4.767 memavail=1628112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.0 pwm=0.000
Stats 8594.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10013 bytes_read=25132 bytes_retransmit=9 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=42.9 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=37.0  sysload=0.36 cputime=4.798 memavail=1628684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.4 pwm=0.000
Stats 8595.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10019 bytes_read=25313 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=43.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.6  sysload=0.36 cputime=4.826 memavail=1628684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.1 pwm=0.000
Stats 8596.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10049 bytes_read=25504 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=42.9 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.4  sysload=0.36 cputime=4.855 memavail=1628944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.5 pwm=0.000
Stats 8597.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10055 bytes_read=25655 bytes_retransmit=9 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=42.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=36.5  sysload=0.33 cputime=4.883 memavail=1628244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.0 pwm=0.000
Stats 8598.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10080 bytes_read=25841 bytes_retransmit=9 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=36.6  sysload=0.33 cputime=4.913 memavail=1628248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.6 pwm=0.000
Stats 8599.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10086 bytes_read=26007 bytes_retransmit=9 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.7  sysload=0.33 cputime=4.940 memavail=1627996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.1 pwm=0.000
Stats 8600.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10116 bytes_read=26168 bytes_retransmit=9 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=42.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.3  sysload=0.33 cputime=4.969 memavail=1627948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.7 pwm=0.000
Stats 8601.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10122 bytes_read=26363 bytes_retransmit=9 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.6  sysload=0.33 cputime=4.998 memavail=1628012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.2 pwm=0.000
Stats 8602.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10152 bytes_read=26539 bytes_retransmit=9 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.0  sysload=0.31 cputime=5.027 memavail=1627644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.8 pwm=0.000
Stats 8603.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10158 bytes_read=26690 bytes_retransmit=9 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=36.0  sysload=0.31 cputime=5.055 memavail=1627704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.4 pwm=0.000
Stats 8604.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10183 bytes_read=26891 bytes_retransmit=9 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.2  sysload=0.31 cputime=5.076 memavail=1627452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.9 pwm=0.000
Stats 8605.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=10189 bytes_read=27042 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.3  sysload=0.31 cputime=5.105 memavail=1627168 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.5 pwm=0.000
Stats 8606.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10219 bytes_read=27217 bytes_retransmit=9 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=36.5  sysload=0.31 cputime=5.135 memavail=1627452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.0 pwm=0.000
Stats 8607.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10225 bytes_read=27413 bytes_retransmit=9 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.2  sysload=0.28 cputime=5.164 memavail=1627144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.6 pwm=0.000
Stats 8608.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10231 bytes_read=27564 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.2  sysload=0.28 cputime=5.194 memavail=1627468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.2 pwm=0.000
Stats 8609.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10261 bytes_read=27725 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.2  sysload=0.28 cputime=5.223 memavail=1627264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.9 pwm=0.000
Stats 8610.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10267 bytes_read=27921 bytes_retransmit=9 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.6 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=35.8  sysload=0.28 cputime=5.253 memavail=1627208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.3 pwm=0.000
Stats 8611.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10292 bytes_read=28091 bytes_retransmit=9 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.9  sysload=0.28 cputime=5.283 memavail=1627156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.9 pwm=0.000
Stats 8612.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10298 bytes_read=28242 bytes_retransmit=9 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.8  sysload=0.26 cputime=5.313 memavail=1627192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.6 pwm=0.000
Stats 8613.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10328 bytes_read=28448 bytes_retransmit=9 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.3  sysload=0.26 cputime=5.345 memavail=1627132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.0 pwm=0.000
Stats 8614.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10357 bytes_read=28604 bytes_retransmit=9 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.0  sysload=0.26 cputime=5.367 memavail=1627160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.6 pwm=0.000
Stats 8615.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10363 bytes_read=28755 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.8  sysload=0.26 cputime=5.397 memavail=1626880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.3 pwm=0.000
Stats 8616.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=10388 bytes_read=28971 bytes_retransmit=9 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=36.2  sysload=0.26 cputime=5.427 memavail=1627100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.7 pwm=0.000
Stats 8617.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=10394 bytes_read=29122 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=35.8  sysload=0.24 cputime=5.456 memavail=1626924 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000
Stats 8618.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=10424 bytes_read=29283 bytes_retransmit=9 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=35.8  sysload=0.24 cputime=5.487 memavail=1626856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.1 pwm=0.000
Stats 8619.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=10430 bytes_read=29479 bytes_retransmit=9 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996389 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=36.2  sysload=0.24 cputime=5.519 memavail=1627120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.5 pwm=0.000
Stats 8620.4: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=10436 bytes_read=29630 bytes_retransmit=9 bytes_invalid=0 send_seq=590 receive_seq=590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=42.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.9  sysload=0.24 cputime=5.548 memavail=1626812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.2 pwm=0.000
Stats 8621.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10466 bytes_read=29820 bytes_retransmit=9 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=35.8  sysload=0.24 cputime=5.579 memavail=1626608 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.9 pwm=0.000
Stats 8622.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10472 bytes_read=30001 bytes_retransmit=9 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=42.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=36.1  sysload=0.22 cputime=5.608 memavail=1626948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.4 pwm=0.000
Stats 8623.4: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10502 bytes_read=30162 bytes_retransmit=9 bytes_invalid=0 send_seq=597 receive_seq=597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.6  sysload=0.22 cputime=5.637 memavail=1627184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.1 pwm=0.000
Stats 8624.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10508 bytes_read=30328 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.7  sysload=0.22 cputime=5.658 memavail=1627488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.6 pwm=0.000
Stats 8625.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10514 bytes_read=30509 bytes_retransmit=9 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=42.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=35.4  sysload=0.22 cputime=5.687 memavail=1627488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.1 pwm=0.000
Stats 8626.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10544 bytes_read=30684 bytes_retransmit=9 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996385 heater_bed: target=0 temp=42.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=35.0  sysload=0.22 cputime=5.718 memavail=1627236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000
Stats 8627.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10550 bytes_read=30850 bytes_retransmit=9 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996384 heater_bed: target=0 temp=42.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=35.7  sysload=0.20 cputime=5.747 memavail=1626936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.5 pwm=0.000
Stats 8628.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10556 bytes_read=31031 bytes_retransmit=9 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=42.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.5  sysload=0.20 cputime=5.776 memavail=1626580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.9 pwm=0.000
Stats 8629.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10586 bytes_read=31192 bytes_retransmit=9 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=41.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=35.1  sysload=0.20 cputime=5.806 memavail=1626816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.7 pwm=0.000
Stats 8630.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10592 bytes_read=31358 bytes_retransmit=9 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=41.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.9  sysload=0.20 cputime=5.834 memavail=1627132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.2 pwm=0.000
Stats 8631.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10617 bytes_read=31558 bytes_retransmit=9 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=41.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.3  sysload=0.20 cputime=5.866 memavail=1627004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.8 pwm=0.000
Stats 8632.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10623 bytes_read=31709 bytes_retransmit=9 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996386 heater_bed: target=0 temp=41.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.1  sysload=0.18 cputime=5.896 memavail=1626980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000
Stats 8633.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10629 bytes_read=31875 bytes_retransmit=9 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=41.9 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=35.6  sysload=0.18 cputime=5.925 memavail=1626948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.1 pwm=0.000
Stats 8634.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10654 bytes_read=32061 bytes_retransmit=9 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996387 heater_bed: target=0 temp=41.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.1  sysload=0.18 cputime=5.948 memavail=1626892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.0 pwm=0.000
Stats 8635.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10660 bytes_read=32212 bytes_retransmit=9 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996388 heater_bed: target=0 temp=41.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=35.4  sysload=0.18 cputime=5.978 memavail=1627016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.4 pwm=0.000
Stats 8636.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10690 bytes_read=32402 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=41.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=35.0  sysload=0.18 cputime=6.009 memavail=1627044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.0 pwm=0.000
Stats 8637.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10696 bytes_read=32583 bytes_retransmit=9 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=0 temp=41.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.8  sysload=0.17 cputime=6.038 memavail=1626952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.7 pwm=0.000
Stats 8638.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10726 bytes_read=32744 bytes_retransmit=9 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=0 temp=41.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=35.3  sysload=0.17 cputime=6.070 memavail=1627088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.0 pwm=0.000
Stats 8639.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10760 bytes_read=32920 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=0 temp=41.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=35.0  sysload=0.17 cputime=6.101 memavail=1627424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.8 pwm=0.000
Stats 8640.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10766 bytes_read=33092 bytes_retransmit=9 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=41.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=35.1  sysload=0.17 cputime=6.131 memavail=1627208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.6 pwm=0.000
Stats 8641.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10772 bytes_read=33247 bytes_retransmit=9 bytes_invalid=0 send_seq=627 receive_seq=627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=40.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=35.2  sysload=0.17 cputime=6.161 memavail=1626844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.3 pwm=0.000
Stats 8642.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10802 bytes_read=33412 bytes_retransmit=9 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=41.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.7  sysload=0.16 cputime=6.193 memavail=1626712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.8 pwm=0.000
Stats 8643.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10808 bytes_read=33581 bytes_retransmit=9 bytes_invalid=0 send_seq=631 receive_seq=631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=41.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.3  sysload=0.16 cputime=6.224 memavail=1626712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.5 pwm=0.000
Stats 8644.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10814 bytes_read=33731 bytes_retransmit=9 bytes_invalid=0 send_seq=632 receive_seq=632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=41.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=35.1  sysload=0.16 cputime=6.246 memavail=1626660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.3 pwm=0.000
Stats 8645.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=10844 bytes_read=33907 bytes_retransmit=9 bytes_invalid=0 send_seq=635 receive_seq=635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.7  sysload=0.16 cputime=6.277 memavail=1626660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.9 pwm=0.000
Stats 8646.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10856 bytes_read=34118 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.9  sysload=0.16 cputime=6.307 memavail=1626912 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000
Stats 8647.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10862 bytes_read=34269 bytes_retransmit=9 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.3  sysload=0.14 cputime=6.336 memavail=1626684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.3 pwm=0.000
Stats 8648.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10887 bytes_read=34440 bytes_retransmit=9 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=40.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.7  sysload=0.14 cputime=6.358 memavail=1626724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.8 pwm=0.000
Stats 8649.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10893 bytes_read=34621 bytes_retransmit=9 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996390 heater_bed: target=0 temp=40.6 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=34.5  sysload=0.14 cputime=6.389 memavail=1626920 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 8650.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=10923 bytes_read=34782 bytes_retransmit=9 bytes_invalid=0 send_seq=644 receive_seq=644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.9  sysload=0.14 cputime=6.419 memavail=1626864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.1 pwm=0.000
Stats 8651.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10929 bytes_read=34962 bytes_retransmit=9 bytes_invalid=0 send_seq=645 receive_seq=645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.6  sysload=0.14 cputime=6.449 memavail=1626928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.8 pwm=0.000
Stats 8652.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10935 bytes_read=35143 bytes_retransmit=9 bytes_invalid=0 send_seq=646 receive_seq=646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.8  sysload=0.13 cputime=6.479 memavail=1627056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.5 pwm=0.000
Stats 8653.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10965 bytes_read=35304 bytes_retransmit=9 bytes_invalid=0 send_seq=649 receive_seq=649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=40.5 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=34.4  sysload=0.13 cputime=6.511 memavail=1626748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.3 pwm=0.000
Stats 8654.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=10995 bytes_read=35480 bytes_retransmit=9 bytes_invalid=0 send_seq=652 receive_seq=652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.4 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.9  sysload=0.13 cputime=6.533 memavail=1626992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.8 pwm=0.000
Stats 8655.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11001 bytes_read=35661 bytes_retransmit=9 bytes_invalid=0 send_seq=653 receive_seq=653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996391 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.3  sysload=0.13 cputime=6.564 memavail=1627196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.3 pwm=0.000
Stats 8656.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11031 bytes_read=35836 bytes_retransmit=9 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996392 heater_bed: target=0 temp=40.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.5  sysload=0.13 cputime=6.620 memavail=1627016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.1 pwm=0.000
Stats 8657.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11037 bytes_read=36002 bytes_retransmit=9 bytes_invalid=0 send_seq=657 receive_seq=657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996393 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.6  sysload=0.13 cputime=6.652 memavail=1626952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.8 pwm=0.000
Stats 8658.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11043 bytes_read=36183 bytes_retransmit=9 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=34.3  sysload=0.12 cputime=6.682 memavail=1627328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.5 pwm=0.000
Stats 8659.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11049 bytes_read=36334 bytes_retransmit=9 bytes_invalid=0 send_seq=659 receive_seq=659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996394 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=34.5  sysload=0.12 cputime=6.712 memavail=1627260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.2 pwm=0.000
Stats 8660.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11074 bytes_read=36505 bytes_retransmit=9 bytes_invalid=0 send_seq=661 receive_seq=661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996395 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.3  sysload=0.12 cputime=6.744 memavail=1627260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.1 pwm=0.000
Stats 8661.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11080 bytes_read=36700 bytes_retransmit=9 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996396 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.3  sysload=0.12 cputime=6.776 memavail=1627508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.4 pwm=0.000
Stats 8662.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11086 bytes_read=36851 bytes_retransmit=9 bytes_invalid=0 send_seq=663 receive_seq=663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996397 heater_bed: target=0 temp=40.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.5  sysload=0.12 cputime=6.808 memavail=1627524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.2 pwm=0.000
Stats 8663.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11111 bytes_read=37022 bytes_retransmit=9 bytes_invalid=0 send_seq=665 receive_seq=665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.3  sysload=0.11 cputime=6.839 memavail=1627728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.9 pwm=0.000
Stats 8664.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11117 bytes_read=37203 bytes_retransmit=9 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996398 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=34.5  sysload=0.11 cputime=6.869 memavail=1627460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.5 pwm=0.000
Stats 8665.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11142 bytes_read=37359 bytes_retransmit=9 bytes_invalid=0 send_seq=668 receive_seq=668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996399 heater_bed: target=0 temp=40.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.1  sysload=0.11 cputime=6.901 memavail=1627768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.9 pwm=0.000
Stats 8666.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11148 bytes_read=37539 bytes_retransmit=9 bytes_invalid=0 send_seq=669 receive_seq=669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996401 heater_bed: target=0 temp=40.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.0  sysload=0.11 cputime=6.932 memavail=1627784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.9 pwm=0.000
Stats 8667.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11154 bytes_read=37720 bytes_retransmit=9 bytes_invalid=0 send_seq=670 receive_seq=670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996403 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.11 cputime=6.961 memavail=1628028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.7 pwm=0.000
Stats 8668.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11160 bytes_read=37871 bytes_retransmit=9 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996404 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=34.2  sysload=0.18 cputime=6.991 memavail=1627524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.3 pwm=0.000
Stats 8669.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11194 bytes_read=38062 bytes_retransmit=9 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=0 temp=39.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.1  sysload=0.18 cputime=7.021 memavail=1627524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.0 pwm=0.000
Stats 8670.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11200 bytes_read=38228 bytes_retransmit=9 bytes_invalid=0 send_seq=675 receive_seq=675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=0 temp=40.0 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=34.0  sysload=0.18 cputime=7.051 memavail=1627528 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.6 pwm=0.000
Stats 8671.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11206 bytes_read=38393 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996405 heater_bed: target=0 temp=39.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.18 cputime=7.080 memavail=1627528 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.4 pwm=0.000
Stats 8672.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11231 bytes_read=38579 bytes_retransmit=9 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996406 heater_bed: target=0 temp=39.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.8  sysload=0.18 cputime=7.111 memavail=1627480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.2 pwm=0.000
Stats 8673.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11237 bytes_read=38745 bytes_retransmit=9 bytes_invalid=0 send_seq=679 receive_seq=679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=0 temp=39.6 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=34.3  sysload=0.17 cputime=7.140 memavail=1627472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.8 pwm=0.000
Stats 8674.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11243 bytes_read=38896 bytes_retransmit=9 bytes_invalid=0 send_seq=680 receive_seq=680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996408 heater_bed: target=0 temp=39.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.1  sysload=0.17 cputime=7.163 memavail=1627476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.6 pwm=0.000
Stats 8675.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11249 bytes_read=39077 bytes_retransmit=9 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996409 heater_bed: target=0 temp=39.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.17 cputime=7.191 memavail=1627532 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.5 pwm=0.000
Stats 8676.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11274 bytes_read=39262 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=39.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.3  sysload=0.17 cputime=7.221 memavail=1627596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.9 pwm=0.000
Stats 8677.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11280 bytes_read=39413 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=39.7 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.9  sysload=0.17 cputime=7.251 memavail=1627540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.5 pwm=0.000
Stats 8678.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11286 bytes_read=39594 bytes_retransmit=9 bytes_invalid=0 send_seq=685 receive_seq=685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=39.6 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=34.1  sysload=0.15 cputime=7.280 memavail=1627544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.3 pwm=0.000
Stats 8679.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11311 bytes_read=39765 bytes_retransmit=9 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=39.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.15 cputime=7.309 memavail=1627680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.4 pwm=0.000
Stats 8680.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11317 bytes_read=39916 bytes_retransmit=9 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=39.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.15 cputime=7.338 memavail=1627484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000
Stats 8681.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11347 bytes_read=40121 bytes_retransmit=9 bytes_invalid=0 send_seq=691 receive_seq=691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=39.5 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.9  sysload=0.15 cputime=7.370 memavail=1627372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 8682.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11353 bytes_read=40287 bytes_retransmit=9 bytes_invalid=0 send_seq=692 receive_seq=692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=39.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.15 cputime=7.399 memavail=1627436 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 8683.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11387 bytes_read=40448 bytes_retransmit=9 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.1  sysload=0.14 cputime=7.429 memavail=1627696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.9 pwm=0.000
Stats 8684.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11393 bytes_read=40629 bytes_retransmit=9 bytes_invalid=0 send_seq=696 receive_seq=696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=39.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=34.2  sysload=0.14 cputime=7.451 memavail=1627752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.6 pwm=0.000
Stats 8685.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11399 bytes_read=40795 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996410 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.9  sysload=0.14 cputime=7.480 memavail=1627760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.3 pwm=0.000
Stats 8686.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11429 bytes_read=40970 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996411 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.9  sysload=0.14 cputime=7.512 memavail=1627760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000
Stats 8687.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11435 bytes_read=41151 bytes_retransmit=9 bytes_invalid=0 send_seq=701 receive_seq=701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=39.4 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=33.8  sysload=0.14 cputime=7.543 memavail=1628068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.8 pwm=0.000
Stats 8688.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11441 bytes_read=41317 bytes_retransmit=9 bytes_invalid=0 send_seq=702 receive_seq=702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996412 heater_bed: target=0 temp=39.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.4  sysload=0.21 cputime=7.572 memavail=1627708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.4 pwm=0.000
Stats 8689.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11471 bytes_read=41478 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996413 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.1  sysload=0.21 cputime=7.602 memavail=1627572 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.2 pwm=0.000
Stats 8690.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11477 bytes_read=41659 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=38.9 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.9  sysload=0.21 cputime=7.631 memavail=1627516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.0 pwm=0.000
Stats 8691.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11483 bytes_read=41825 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996420 heater_bed: target=0 temp=39.2 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.0  sysload=0.21 cputime=7.661 memavail=1627516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.7 pwm=0.000
Stats 8692.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11489 bytes_read=41990 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.1  sysload=0.21 cputime=7.690 memavail=1627516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000
Stats 8693.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11519 bytes_read=42181 bytes_retransmit=9 bytes_invalid=0 send_seq=711 receive_seq=711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996422 heater_bed: target=0 temp=39.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=34.2  sysload=0.19 cputime=7.719 memavail=1627768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.3 pwm=0.000
Stats 8694.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11525 bytes_read=42347 bytes_retransmit=9 bytes_invalid=0 send_seq=712 receive_seq=712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=39.3 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=33.8  sysload=0.19 cputime=7.749 memavail=1627720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 8695.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11531 bytes_read=42498 bytes_retransmit=9 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996424 heater_bed: target=0 temp=38.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.5  sysload=0.19 cputime=7.777 memavail=1627984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.5 pwm=0.000
Stats 8696.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11537 bytes_read=42679 bytes_retransmit=9 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=33.2  sysload=0.19 cputime=7.800 memavail=1628064 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.3 pwm=0.000
Stats 8697.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11562 bytes_read=42864 bytes_retransmit=9 bytes_invalid=0 send_seq=716 receive_seq=716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996426 heater_bed: target=0 temp=39.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.4  sysload=0.19 cputime=7.829 memavail=1628024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.1 pwm=0.000
Stats 8698.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11568 bytes_read=43015 bytes_retransmit=9 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=39.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.3  sysload=0.26 cputime=7.857 memavail=1627520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.7 pwm=0.000
Stats 8699.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11574 bytes_read=43194 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=39.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=34.0  sysload=0.26 cputime=7.886 memavail=1627588 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.4 pwm=0.000
Stats 8700.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11599 bytes_read=43355 bytes_retransmit=9 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996425 heater_bed: target=0 temp=38.8 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.4  sysload=0.26 cputime=7.915 memavail=1627216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.1 pwm=0.000
Stats 8701.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=11605 bytes_read=43495 bytes_retransmit=9 bytes_invalid=0 send_seq=721 receive_seq=721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.8  sysload=0.26 cputime=7.945 memavail=1626964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.0 pwm=0.000
Stats 8702.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11611 bytes_read=43678 bytes_retransmit=9 bytes_invalid=0 send_seq=722 receive_seq=722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=39.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.9  sysload=0.26 cputime=7.975 memavail=1626964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.8 pwm=0.000
Stats 8703.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11617 bytes_read=43837 bytes_retransmit=9 bytes_invalid=0 send_seq=723 receive_seq=723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=38.4 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.9  sysload=0.24 cputime=8.004 memavail=1627084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.5 pwm=0.000
Stats 8704.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11623 bytes_read=43988 bytes_retransmit=9 bytes_invalid=0 send_seq=724 receive_seq=724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=38.7 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=33.1  sysload=0.24 cputime=8.033 memavail=1627040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000
Stats 8705.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11681 bytes_read=44189 bytes_retransmit=9 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=38.5 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.8  sysload=0.24 cputime=8.063 memavail=1626736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.1 pwm=0.000
Stats 8706.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11706 bytes_read=44360 bytes_retransmit=9 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=38.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=34.1  sysload=0.24 cputime=8.094 memavail=1626980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
Stats 8707.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=11737 bytes_read=44547 bytes_retransmit=9 bytes_invalid=0 send_seq=734 receive_seq=734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=38.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.3  sysload=0.24 cputime=8.124 memavail=1626980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.5 pwm=0.000
Stats 8708.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=11767 bytes_read=44738 bytes_retransmit=9 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=38.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=32.6  sysload=0.22 cputime=8.154 memavail=1626932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.3 pwm=0.000
Stats 8709.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=11773 bytes_read=44904 bytes_retransmit=9 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=38.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.2  sysload=0.22 cputime=8.182 memavail=1626980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.9 pwm=0.000
Stats 8710.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=11779 bytes_read=45055 bytes_retransmit=9 bytes_invalid=0 send_seq=739 receive_seq=739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996428 heater_bed: target=0 temp=38.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.1  sysload=0.22 cputime=8.212 memavail=1626984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000
Stats 8711.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=11785 bytes_read=45236 bytes_retransmit=9 bytes_invalid=0 send_seq=740 receive_seq=740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=33.4  sysload=0.22 cputime=8.240 memavail=1626740 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.5 pwm=0.000
Stats 8712.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11791 bytes_read=45416 bytes_retransmit=9 bytes_invalid=0 send_seq=741 receive_seq=741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996427 heater_bed: target=0 temp=38.4 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.8  sysload=0.22 cputime=8.269 memavail=1626740 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.4 pwm=0.000
Stats 8713.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11816 bytes_read=45572 bytes_retransmit=9 bytes_invalid=0 send_seq=743 receive_seq=743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996429 heater_bed: target=0 temp=38.3 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=32.9  sysload=0.20 cputime=8.297 memavail=1626800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.4 pwm=0.000
Stats 8714.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11822 bytes_read=45753 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.7  sysload=0.20 cputime=8.327 memavail=1626800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 8715.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11828 bytes_read=45919 bytes_retransmit=9 bytes_invalid=0 send_seq=745 receive_seq=745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.1  sysload=0.20 cputime=8.357 memavail=1626548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000
Stats 8716.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11853 bytes_read=46075 bytes_retransmit=9 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.0  sysload=0.20 cputime=8.385 memavail=1627108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.3 pwm=0.000
Stats 8717.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11859 bytes_read=46270 bytes_retransmit=9 bytes_invalid=0 send_seq=748 receive_seq=748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.1  sysload=0.20 cputime=8.414 memavail=1626752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.0 pwm=0.000
Stats 8718.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11865 bytes_read=46436 bytes_retransmit=9 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.4  sysload=0.18 cputime=8.444 memavail=1626808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
Stats 8719.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11871 bytes_read=46587 bytes_retransmit=9 bytes_invalid=0 send_seq=750 receive_seq=750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=33.6  sysload=0.18 cputime=8.473 memavail=1626752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.6 pwm=0.000
Stats 8720.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11877 bytes_read=46768 bytes_retransmit=9 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=33.2  sysload=0.18 cputime=8.501 memavail=1626440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.4 pwm=0.000
Stats 8721.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11902 bytes_read=46939 bytes_retransmit=9 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.6  sysload=0.18 cputime=8.529 memavail=1626692 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000
Stats 8722.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11908 bytes_read=47104 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=33.4  sysload=0.18 cputime=8.558 memavail=1626944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000
Stats 8723.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11914 bytes_read=47285 bytes_retransmit=9 bytes_invalid=0 send_seq=755 receive_seq=755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=33.4  sysload=0.17 cputime=8.587 memavail=1626708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.8 pwm=0.000
Stats 8724.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11920 bytes_read=47451 bytes_retransmit=9 bytes_invalid=0 send_seq=756 receive_seq=756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=33.2  sysload=0.17 cputime=8.615 memavail=1626792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.7 pwm=0.000
Stats 8725.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11926 bytes_read=47602 bytes_retransmit=9 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.1  sysload=0.17 cputime=8.644 memavail=1627028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 8726.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11951 bytes_read=47788 bytes_retransmit=9 bytes_invalid=0 send_seq=759 receive_seq=759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.0  sysload=0.17 cputime=8.674 memavail=1627012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 8727.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11957 bytes_read=47968 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=33.1  sysload=0.17 cputime=8.703 memavail=1627048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
Stats 8728.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11963 bytes_read=48119 bytes_retransmit=9 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996437 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.1  sysload=0.24 cputime=8.731 memavail=1627016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000
Stats 8729.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11969 bytes_read=48300 bytes_retransmit=9 bytes_invalid=0 send_seq=762 receive_seq=762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=33.6  sysload=0.24 cputime=8.760 memavail=1627084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000
Stats 8730.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=11994 bytes_read=48471 bytes_retransmit=9 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.8  sysload=0.24 cputime=8.788 memavail=1627084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000
Stats 8731.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12000 bytes_read=48622 bytes_retransmit=9 bytes_invalid=0 send_seq=765 receive_seq=765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.6  sysload=0.24 cputime=8.817 memavail=1627092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.9 pwm=0.000
Stats 8732.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12006 bytes_read=48817 bytes_retransmit=9 bytes_invalid=0 send_seq=766 receive_seq=766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=32.7  sysload=0.24 cputime=8.846 memavail=1627084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.7 pwm=0.000
Stats 8733.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12012 bytes_read=48983 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.8  sysload=0.22 cputime=8.875 memavail=1627028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.5 pwm=0.000
Stats 8734.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12037 bytes_read=49139 bytes_retransmit=9 bytes_invalid=0 send_seq=769 receive_seq=769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996432 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.7  sysload=0.22 cputime=8.896 memavail=1626580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000
Stats 8735.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12043 bytes_read=49320 bytes_retransmit=9 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996433 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=32.6  sysload=0.22 cputime=8.926 memavail=1626852 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000
Stats 8736.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12049 bytes_read=49486 bytes_retransmit=9 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=32.5  sysload=0.22 cputime=8.955 memavail=1627104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000
Stats 8737.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12055 bytes_read=49651 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.9  sysload=0.22 cputime=8.984 memavail=1626788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
Stats 8738.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12061 bytes_read=49832 bytes_retransmit=9 bytes_invalid=0 send_seq=773 receive_seq=773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996434 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.9  sysload=0.20 cputime=9.014 memavail=1627044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
Stats 8739.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12067 bytes_read=49998 bytes_retransmit=9 bytes_invalid=0 send_seq=774 receive_seq=774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=38.1 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=32.4  sysload=0.20 cputime=9.042 memavail=1626840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 8740.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12097 bytes_read=50159 bytes_retransmit=9 bytes_invalid=0 send_seq=777 receive_seq=777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.2  sysload=0.20 cputime=9.071 memavail=1627104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 8741.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12103 bytes_read=50340 bytes_retransmit=9 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=37.6 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.5  sysload=0.20 cputime=9.100 memavail=1627364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000
Stats 8742.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12109 bytes_read=50520 bytes_retransmit=9 bytes_invalid=0 send_seq=779 receive_seq=779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996435 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.9  sysload=0.20 cputime=9.129 memavail=1627412 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.5 pwm=0.000
Stats 8743.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12115 bytes_read=50671 bytes_retransmit=9 bytes_invalid=0 send_seq=780 receive_seq=780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996436 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=33.2  sysload=0.18 cputime=9.158 memavail=1627140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 8744.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12140 bytes_read=50857 bytes_retransmit=9 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=38.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.3  sysload=0.18 cputime=9.189 memavail=1627104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000
Stats 8745.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12146 bytes_read=51023 bytes_retransmit=9 bytes_invalid=0 send_seq=783 receive_seq=783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.1  sysload=0.18 cputime=9.211 memavail=1627036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000
Stats 8746.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12152 bytes_read=51174 bytes_retransmit=9 bytes_invalid=0 send_seq=784 receive_seq=784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=37.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.3  sysload=0.18 cputime=9.239 memavail=1626848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000
Stats 8747.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12158 bytes_read=51369 bytes_retransmit=9 bytes_invalid=0 send_seq=785 receive_seq=785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=37.6 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.7  sysload=0.18 cputime=9.269 memavail=1627060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
Stats 8748.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12164 bytes_read=51535 bytes_retransmit=9 bytes_invalid=0 send_seq=786 receive_seq=786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=37.4 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.0  sysload=0.25 cputime=9.298 memavail=1626808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 8749.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12212 bytes_read=51696 bytes_retransmit=9 bytes_invalid=0 send_seq=789 receive_seq=789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=37.6 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.6  sysload=0.25 cputime=9.330 memavail=1627060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000
Stats 8750.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12218 bytes_read=51877 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=37.2 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.9  sysload=0.25 cputime=9.360 memavail=1627008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 8751.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12224 bytes_read=52043 bytes_retransmit=9 bytes_invalid=0 send_seq=791 receive_seq=791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=37.7 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.2  sysload=0.25 cputime=9.389 memavail=1626996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 8752.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12254 bytes_read=52219 bytes_retransmit=9 bytes_invalid=0 send_seq=794 receive_seq=794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=37.1 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=32.3  sysload=0.25 cputime=9.420 memavail=1627212 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000
Stats 8753.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12279 bytes_read=52405 bytes_retransmit=9 bytes_invalid=0 send_seq=796 receive_seq=796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=36.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.0  sysload=0.23 cputime=9.451 memavail=1627112 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000
Stats 8754.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12304 bytes_read=52576 bytes_retransmit=9 bytes_invalid=0 send_seq=798 receive_seq=798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996457 heater_bed: target=0 temp=36.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=32.1  sysload=0.23 cputime=9.480 memavail=1626896 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 8755.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12310 bytes_read=52727 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=36.9 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.8  sysload=0.23 cputime=9.509 memavail=1626756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000
Stats 8756.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12316 bytes_read=52908 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996460 heater_bed: target=0 temp=37.3 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=32.1  sysload=0.23 cputime=9.539 memavail=1626368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 8757.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12322 bytes_read=53074 bytes_retransmit=9 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=0 temp=36.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.6  sysload=0.23 cputime=9.567 memavail=1626400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 8758.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12328 bytes_read=53239 bytes_retransmit=9 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996459 heater_bed: target=0 temp=37.1 pwm=0.000 rpi: temp=58.4 mcu_temp: temp=31.6  sysload=0.21 cputime=9.598 memavail=1626496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 8759.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12358 bytes_read=53425 bytes_retransmit=9 bytes_invalid=0 send_seq=805 receive_seq=805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996458 heater_bed: target=0 temp=36.7 pwm=0.000 rpi: temp=58.9 mcu_temp: temp=31.6  sysload=0.21 cputime=9.628 memavail=1626960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 8760.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12364 bytes_read=53580 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996456 heater_bed: target=0 temp=36.4 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=31.7  sysload=0.21 cputime=9.658 memavail=1626748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
Stats 8761.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12389 bytes_read=53726 bytes_retransmit=9 bytes_invalid=0 send_seq=808 receive_seq=808 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996455 heater_bed: target=0 temp=36.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.9  sysload=0.21 cputime=9.686 memavail=1627032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 8762.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12395 bytes_read=53895 bytes_retransmit=9 bytes_invalid=0 send_seq=809 receive_seq=809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996454 heater_bed: target=0 temp=35.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.8  sysload=0.21 cputime=9.716 memavail=1627032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 8763.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=12401 bytes_read=54072 bytes_retransmit=9 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996453 heater_bed: target=0 temp=36.2 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.7  sysload=0.19 cputime=9.747 memavail=1627032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000
Stats 8764.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=12431 bytes_read=54233 bytes_retransmit=9 bytes_invalid=0 send_seq=813 receive_seq=813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=36.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.5  sysload=0.19 cputime=9.777 memavail=1626868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000
Stats 8765.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=12437 bytes_read=54414 bytes_retransmit=9 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=36.4 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.0  sysload=0.19 cputime=9.806 memavail=1627080 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
Stats 8766.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=12443 bytes_read=54580 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=36.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.6  sysload=0.19 cputime=9.836 memavail=1627120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000
Stats 8767.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=12449 bytes_read=54731 bytes_retransmit=9 bytes_invalid=0 send_seq=816 receive_seq=816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=35.9 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=31.8  sysload=0.19 cputime=9.865 memavail=1627544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 8768.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12455 bytes_read=54926 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=36.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=32.3  sysload=0.18 cputime=9.896 memavail=1627484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 8769.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12467 bytes_read=55108 bytes_retransmit=9 bytes_invalid=0 send_seq=819 receive_seq=819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=36.0 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.1  sysload=0.18 cputime=9.928 memavail=1627052 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000
Stats 8770.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12473 bytes_read=55259 bytes_retransmit=9 bytes_invalid=0 send_seq=820 receive_seq=820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=35.7 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.8  sysload=0.18 cputime=9.958 memavail=1627068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000
Stats 8771.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12498 bytes_read=55445 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.8 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.4  sysload=0.18 cputime=9.988 memavail=1626980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000
Stats 8772.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12504 bytes_read=55611 bytes_retransmit=9 bytes_invalid=0 send_seq=823 receive_seq=823 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.8 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.3  sysload=0.18 cputime=10.017 memavail=1627044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
Stats 8773.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12510 bytes_read=55776 bytes_retransmit=9 bytes_invalid=0 send_seq=824 receive_seq=824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.5 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.3  sysload=0.16 cputime=10.044 memavail=1627240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.1 pwm=0.000
Stats 8774.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12554 bytes_read=55982 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.4 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.2  sysload=0.16 cputime=10.074 memavail=1628060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 8775.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12560 bytes_read=56133 bytes_retransmit=9 bytes_invalid=0 send_seq=828 receive_seq=828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.7 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.1  sysload=0.16 cputime=10.103 memavail=1627704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 8776.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12614 bytes_read=56304 bytes_retransmit=9 bytes_invalid=0 send_seq=833 receive_seq=833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.3  sysload=0.16 cputime=10.133 memavail=1627244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 8777.5: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12620 bytes_read=56500 bytes_retransmit=9 bytes_invalid=0 send_seq=834 receive_seq=834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.0  sysload=0.16 cputime=10.163 memavail=1627104 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 8778.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12626 bytes_read=56666 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.9 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.2  sysload=0.15 cputime=10.193 memavail=1627308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 8779.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12632 bytes_read=56817 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.5 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=30.8  sysload=0.15 cputime=10.222 memavail=1627268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 8780.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12638 bytes_read=57013 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.0  sysload=0.15 cputime=10.252 memavail=1627820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 8781.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12663 bytes_read=57169 bytes_retransmit=9 bytes_invalid=0 send_seq=839 receive_seq=839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=30.9  sysload=0.15 cputime=10.284 memavail=1627884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 8782.5: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12669 bytes_read=57320 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.4 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.3  sysload=0.15 cputime=10.313 memavail=1628072 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 8783.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12675 bytes_read=57530 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.5  sysload=0.14 cputime=10.344 memavail=1628276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000
Stats 8784.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12681 bytes_read=57681 bytes_retransmit=9 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=61.3 mcu_temp: temp=30.9  sysload=0.14 cputime=10.368 memavail=1628140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 8785.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12687 bytes_read=57832 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.6  sysload=0.14 cputime=10.397 memavail=1628152 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 8786.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12693 bytes_read=58028 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.4 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=31.2  sysload=0.14 cputime=10.428 memavail=1628448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 8787.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12699 bytes_read=58179 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=35.2 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=30.7  sysload=0.14 cputime=10.451 memavail=1627944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 8788.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12724 bytes_read=58349 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=30.8  sysload=0.13 cputime=10.479 memavail=1627944 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 8789.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12730 bytes_read=58545 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=60.4 mcu_temp: temp=30.9  sysload=0.13 cputime=10.511 memavail=1627748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 8790.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12736 bytes_read=58696 bytes_retransmit=9 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996446 heater_bed: target=0 temp=35.3 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=31.0  sysload=0.13 cputime=10.542 memavail=1627424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 8791.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12742 bytes_read=58847 bytes_retransmit=9 bytes_invalid=0 send_seq=850 receive_seq=850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=30.9  sysload=0.13 cputime=10.572 memavail=1627456 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 8792.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000012 bytes_write=12748 bytes_read=59043 bytes_retransmit=9 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=30.6  sysload=0.13 cputime=10.605 memavail=1627448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 8793.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=12754 bytes_read=59208 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996447 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=30.9  sysload=0.12 cputime=10.635 memavail=1627200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 8794.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=12760 bytes_read=59359 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=31.0  sysload=0.12 cputime=10.666 memavail=1627956 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 8795.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=12790 bytes_read=59565 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996448 heater_bed: target=0 temp=35.1 pwm=0.000 rpi: temp=60.9 mcu_temp: temp=31.1  sysload=0.12 cputime=10.698 memavail=1627392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 8796.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=12796 bytes_read=59716 bytes_retransmit=9 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=35.0 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=30.9  sysload=0.12 cputime=10.728 memavail=1627088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 8797.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=12802 bytes_read=59882 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996449 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=30.7  sysload=0.12 cputime=10.758 memavail=1627088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 8798.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12808 bytes_read=60077 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=59.9 mcu_temp: temp=30.5  sysload=0.19 cputime=10.789 memavail=1626836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 8799.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12814 bytes_read=60228 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996450 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=30.4  sysload=0.19 cputime=10.819 memavail=1627284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 8800.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12839 bytes_read=60399 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996451 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=30.4  sysload=0.19 cputime=10.849 memavail=1627592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Stats 8801.6: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=12845 bytes_read=60580 bytes_retransmit=9 bytes_invalid=0 send_seq=863 receive_seq=863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996452 heater_bed: target=0 temp=34.9 pwm=0.000 rpi: temp=59.4 mcu_temp: temp=30.7  sysload=0.19 cputime=10.881 memavail=1627844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Starting SD card print (position 0)
Stats 11773.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=60466 bytes_read=571378 bytes_retransmit=9 bytes_invalid=0 send_seq=5982 receive_seq=5982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=22.0 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.13 cputime=98.287 memavail=1628152 print_time=11781.062 buffer_time=0.000 print_stall=0 extruder: target=220 temp=18.7 pwm=1.000
Heater heater_bed approaching new target of 60.000
Heater extruder approaching new target of 220.000
Stats 11774.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=60524 bytes_read=571564 bytes_retransmit=9 bytes_invalid=0 send_seq=5987 receive_seq=5987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=22.1 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.12 cputime=98.323 memavail=1627916 print_time=11782.063 buffer_time=0.000 print_stall=0 extruder: target=220 temp=19.2 pwm=1.000
Stats 11775.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=60577 bytes_read=571760 bytes_retransmit=9 bytes_invalid=0 send_seq=5991 receive_seq=5991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996548 heater_bed: target=60 temp=21.7 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=25.9 sd_pos=1519 sysload=0.12 cputime=98.358 memavail=1627576 print_time=11783.063 buffer_time=0.000 print_stall=0 extruder: target=220 temp=20.3 pwm=1.000
Stats 11776.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=60602 bytes_read=571916 bytes_retransmit=9 bytes_invalid=0 send_seq=5993 receive_seq=5993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=22.9 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.0 sd_pos=1519 sysload=0.12 cputime=98.389 memavail=1627356 print_time=11784.063 buffer_time=0.000 print_stall=0 extruder: target=220 temp=20.8 pwm=1.000
Stats 11777.0: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=60702 bytes_read=572112 bytes_retransmit=9 bytes_invalid=0 send_seq=6000 receive_seq=6000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=22.9 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=25.9 sd_pos=1519 sysload=0.12 cputime=98.425 memavail=1627324 print_time=11785.064 buffer_time=0.000 print_stall=0 extruder: target=220 temp=21.1 pwm=1.000
Stats 11778.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000080 bytes_write=60727 bytes_read=572313 bytes_retransmit=9 bytes_invalid=0 send_seq=6002 receive_seq=6002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996553 heater_bed: target=60 temp=23.7 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.2 sd_pos=1519 sysload=0.12 cputime=98.447 memavail=1627328 print_time=11786.065 buffer_time=0.000 print_stall=0 extruder: target=220 temp=21.5 pwm=1.000
Stats 11779.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000080 bytes_write=60779 bytes_read=572474 bytes_retransmit=9 bytes_invalid=0 send_seq=6005 receive_seq=6005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996552 heater_bed: target=60 temp=24.4 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.11 cputime=98.481 memavail=1627148 print_time=11787.065 buffer_time=0.000 print_stall=0 extruder: target=220 temp=23.2 pwm=1.000
Stats 11780.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000080 bytes_write=60847 bytes_read=572660 bytes_retransmit=9 bytes_invalid=0 send_seq=6010 receive_seq=6010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996550 heater_bed: target=60 temp=25.0 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=25.9 sd_pos=1519 sysload=0.11 cputime=98.516 memavail=1627388 print_time=11788.066 buffer_time=0.000 print_stall=0 extruder: target=220 temp=26.0 pwm=1.000
Stats 11781.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000080 bytes_write=60956 bytes_read=572866 bytes_retransmit=9 bytes_invalid=0 send_seq=6016 receive_seq=6016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996549 heater_bed: target=60 temp=25.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.2 sd_pos=1519 sysload=0.11 cputime=98.550 memavail=1627368 print_time=11789.066 buffer_time=0.000 print_stall=0 extruder: target=220 temp=26.2 pwm=1.000
Stats 11782.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000026 mcu_task_stddev=0.000080 bytes_write=61008 bytes_read=573027 bytes_retransmit=9 bytes_invalid=0 send_seq=6019 receive_seq=6019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=25.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.11 cputime=98.577 memavail=1626024 print_time=11790.067 buffer_time=0.000 print_stall=0 extruder: target=220 temp=27.7 pwm=1.000
Stats 11783.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=61049 bytes_read=573223 bytes_retransmit=9 bytes_invalid=0 send_seq=6023 receive_seq=6023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=26.0 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=25.9 sd_pos=1519 sysload=0.11 cputime=98.600 memavail=1626596 print_time=11791.067 buffer_time=0.000 print_stall=0 extruder: target=220 temp=28.9 pwm=1.000
Stats 11784.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=61103 bytes_read=573424 bytes_retransmit=9 bytes_invalid=0 send_seq=6028 receive_seq=6028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=26.1 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.3 sd_pos=1519 sysload=0.10 cputime=98.635 memavail=1626588 print_time=11792.068 buffer_time=0.000 print_stall=0 extruder: target=220 temp=31.5 pwm=1.000
Stats 11785.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=61175 bytes_read=573595 bytes_retransmit=9 bytes_invalid=0 send_seq=6033 receive_seq=6033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=26.1 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.7 sd_pos=1519 sysload=0.10 cputime=98.668 memavail=1626108 print_time=11793.069 buffer_time=0.000 print_stall=0 extruder: target=220 temp=33.4 pwm=1.000
Stats 11786.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=61275 bytes_read=573791 bytes_retransmit=9 bytes_invalid=0 send_seq=6040 receive_seq=6040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996544 heater_bed: target=60 temp=26.1 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=26.2 sd_pos=1519 sysload=0.10 cputime=98.702 memavail=1626108 print_time=11794.069 buffer_time=0.000 print_stall=0 extruder: target=220 temp=35.1 pwm=1.000
Stats 11787.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000034 bytes_write=61343 bytes_read=573992 bytes_retransmit=9 bytes_invalid=0 send_seq=6045 receive_seq=6045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=26.3 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.4 sd_pos=1519 sysload=0.10 cputime=98.735 memavail=1626104 print_time=11795.070 buffer_time=0.000 print_stall=0 extruder: target=220 temp=38.7 pwm=1.000
Stats 11788.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61411 bytes_read=574178 bytes_retransmit=9 bytes_invalid=0 send_seq=6050 receive_seq=6050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996542 heater_bed: target=60 temp=26.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.10 cputime=98.760 memavail=1626048 print_time=11796.071 buffer_time=0.000 print_stall=0 extruder: target=220 temp=39.9 pwm=1.000
Stats 11789.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61483 bytes_read=574364 bytes_retransmit=9 bytes_invalid=0 send_seq=6055 receive_seq=6055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996541 heater_bed: target=60 temp=27.1 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.09 cputime=98.792 memavail=1625988 print_time=11797.072 buffer_time=0.000 print_stall=0 extruder: target=220 temp=42.0 pwm=1.000
Stats 11790.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61578 bytes_read=574570 bytes_retransmit=9 bytes_invalid=0 send_seq=6061 receive_seq=6061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=27.7 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=26.3 sd_pos=1519 sysload=0.09 cputime=98.827 memavail=1626360 print_time=11798.072 buffer_time=0.000 print_stall=0 extruder: target=220 temp=45.1 pwm=1.000
Stats 11791.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61654 bytes_read=574741 bytes_retransmit=9 bytes_invalid=0 send_seq=6066 receive_seq=6066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=27.8 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=26.4 sd_pos=1519 sysload=0.09 cputime=98.860 memavail=1626332 print_time=11799.073 buffer_time=0.000 print_stall=0 extruder: target=220 temp=48.0 pwm=1.000
Stats 11792.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000014 mcu_task_stddev=0.000028 bytes_write=61722 bytes_read=574942 bytes_retransmit=9 bytes_invalid=0 send_seq=6071 receive_seq=6071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=28.5 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.09 cputime=98.894 memavail=1626284 print_time=11800.074 buffer_time=0.000 print_stall=0 extruder: target=220 temp=49.7 pwm=1.000
Stats 11793.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=61794 bytes_read=575143 bytes_retransmit=9 bytes_invalid=0 send_seq=6076 receive_seq=6076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996544 heater_bed: target=60 temp=28.6 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.09 cputime=98.919 memavail=1626048 print_time=11801.075 buffer_time=0.000 print_stall=0 extruder: target=220 temp=53.0 pwm=1.000
Stats 11794.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=61889 bytes_read=575319 bytes_retransmit=9 bytes_invalid=0 send_seq=6082 receive_seq=6082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=29.0 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.08 cputime=98.951 memavail=1626048 print_time=11802.075 buffer_time=0.000 print_stall=0 extruder: target=220 temp=55.4 pwm=1.000
Stats 11795.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=61979 bytes_read=575520 bytes_retransmit=9 bytes_invalid=0 send_seq=6087 receive_seq=6087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=29.2 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.08 cputime=98.977 memavail=1626264 print_time=11803.076 buffer_time=0.000 print_stall=0 extruder: target=220 temp=57.6 pwm=1.000
Stats 11796.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=62034 bytes_read=575701 bytes_retransmit=9 bytes_invalid=0 send_seq=6091 receive_seq=6091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=29.3 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.0 sd_pos=1519 sysload=0.08 cputime=99.011 memavail=1626332 print_time=11804.076 buffer_time=0.000 print_stall=0 extruder: target=220 temp=60.7 pwm=1.000
Stats 11797.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=62114 bytes_read=575867 bytes_retransmit=9 bytes_invalid=0 send_seq=6096 receive_seq=6095 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=29.6 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.4 sd_pos=1519 sysload=0.08 cputime=99.047 memavail=1626264 print_time=11805.077 buffer_time=0.000 print_stall=0 extruder: target=220 temp=63.1 pwm=1.000
Stats 11798.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=62209 bytes_read=576093 bytes_retransmit=9 bytes_invalid=0 send_seq=6102 receive_seq=6102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996548 heater_bed: target=60 temp=29.5 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.9 sd_pos=1519 sysload=0.08 cputime=99.082 memavail=1626548 print_time=11806.077 buffer_time=0.000 print_stall=0 extruder: target=220 temp=65.6 pwm=1.000
Stats 11799.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=62277 bytes_read=576279 bytes_retransmit=9 bytes_invalid=0 send_seq=6107 receive_seq=6107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996548 heater_bed: target=60 temp=30.4 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.2 sd_pos=1519 sysload=0.08 cputime=99.117 memavail=1626316 print_time=11807.078 buffer_time=0.000 print_stall=0 extruder: target=220 temp=68.7 pwm=1.000
Stats 11800.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=62353 bytes_read=576450 bytes_retransmit=9 bytes_invalid=0 send_seq=6112 receive_seq=6112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=31.6 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.3 sd_pos=1519 sysload=0.08 cputime=99.151 memavail=1626608 print_time=11808.079 buffer_time=0.000 print_stall=0 extruder: target=220 temp=71.1 pwm=1.000
Stats 11801.0: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=62425 bytes_read=576651 bytes_retransmit=9 bytes_invalid=0 send_seq=6117 receive_seq=6117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=32.4 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.08 cputime=99.187 memavail=1626892 print_time=11809.080 buffer_time=0.000 print_stall=0 extruder: target=220 temp=73.5 pwm=1.000
Stats 11802.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000034 bytes_write=62539 bytes_read=576841 bytes_retransmit=9 bytes_invalid=0 send_seq=6124 receive_seq=6124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996546 heater_bed: target=60 temp=32.6 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.08 cputime=99.223 memavail=1627152 print_time=11810.081 buffer_time=0.000 print_stall=0 extruder: target=220 temp=76.6 pwm=1.000
Stats 11803.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=62607 bytes_read=577017 bytes_retransmit=9 bytes_invalid=0 send_seq=6129 receive_seq=6129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996547 heater_bed: target=60 temp=32.7 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.2 sd_pos=1519 sysload=0.08 cputime=99.259 memavail=1627436 print_time=11811.081 buffer_time=0.000 print_stall=0 extruder: target=220 temp=79.0 pwm=1.000
Stats 11804.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=62689 bytes_read=577206 bytes_retransmit=9 bytes_invalid=0 send_seq=6134 receive_seq=6134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=32.9 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.2 sd_pos=1519 sysload=0.07 cputime=99.295 memavail=1627372 print_time=11812.082 buffer_time=0.000 print_stall=0 extruder: target=220 temp=81.4 pwm=1.000
Stats 11805.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=62761 bytes_read=577381 bytes_retransmit=9 bytes_invalid=0 send_seq=6139 receive_seq=6139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=33.1 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=26.6 sd_pos=1519 sysload=0.07 cputime=99.332 memavail=1628620 print_time=11813.083 buffer_time=0.000 print_stall=0 extruder: target=220 temp=84.6 pwm=1.000
Stats 11806.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=62829 bytes_read=577551 bytes_retransmit=9 bytes_invalid=0 send_seq=6144 receive_seq=6144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996545 heater_bed: target=60 temp=33.3 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.6 sd_pos=1519 sysload=0.07 cputime=99.365 memavail=1628924 print_time=11814.083 buffer_time=0.000 print_stall=0 extruder: target=220 temp=87.0 pwm=1.000
Stats 11807.1: gcodein=0 mcu: mcu_awake=0.005 mcu_task_avg=0.000016 mcu_task_stddev=0.000033 bytes_write=62926 bytes_read=577757 bytes_retransmit=9 bytes_invalid=0 send_seq=6150 receive_seq=6150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=33.9 pwm=1.000 rpi: temp=53.6 mcu_temp: temp=26.1 sd_pos=1519 sysload=0.07 cputime=99.400 memavail=1628676 print_time=11815.084 buffer_time=0.000 print_stall=0 extruder: target=220 temp=88.9 pwm=1.000
Stats 11808.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=62981 bytes_read=577953 bytes_retransmit=9 bytes_invalid=0 send_seq=6154 receive_seq=6154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=34.3 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=26.6 sd_pos=1519 sysload=0.07 cputime=99.433 memavail=1628632 print_time=11816.084 buffer_time=0.000 print_stall=0 extruder: target=220 temp=92.3 pwm=1.000
Stats 11809.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=63039 bytes_read=578124 bytes_retransmit=9 bytes_invalid=0 send_seq=6159 receive_seq=6159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=34.6 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.6 sd_pos=1519 sysload=0.06 cputime=99.468 memavail=1628928 print_time=11817.085 buffer_time=0.000 print_stall=0 extruder: target=220 temp=94.6 pwm=1.000
Stats 11810.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=63115 bytes_read=578325 bytes_retransmit=9 bytes_invalid=0 send_seq=6164 receive_seq=6164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996544 heater_bed: target=60 temp=34.9 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.06 cputime=99.506 memavail=1628868 print_time=11818.085 buffer_time=0.000 print_stall=0 extruder: target=220 temp=96.9 pwm=1.000
Stats 11811.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=63215 bytes_read=578521 bytes_retransmit=9 bytes_invalid=0 send_seq=6171 receive_seq=6171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=35.0 pwm=1.000 rpi: temp=53.6 mcu_temp: temp=26.4 sd_pos=1519 sysload=0.06 cputime=99.531 memavail=1628596 print_time=11819.086 buffer_time=0.000 print_stall=0 extruder: target=220 temp=99.9 pwm=1.000
Stats 11812.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000032 bytes_write=63301 bytes_read=578692 bytes_retransmit=9 bytes_invalid=0 send_seq=6177 receive_seq=6176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996541 heater_bed: target=60 temp=35.2 pwm=1.000 rpi: temp=55.0 mcu_temp: temp=26.3 sd_pos=1519 sysload=0.06 cputime=99.562 memavail=1628860 print_time=11820.087 buffer_time=0.000 print_stall=0 extruder: target=220 temp=102.2 pwm=1.000
Stats 11813.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=63356 bytes_read=578919 bytes_retransmit=9 bytes_invalid=0 send_seq=6181 receive_seq=6181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996541 heater_bed: target=60 temp=35.8 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.6 sd_pos=1519 sysload=0.06 cputime=99.599 memavail=1628632 print_time=11821.088 buffer_time=0.000 print_stall=0 extruder: target=220 temp=104.4 pwm=1.000
Stats 11814.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=63438 bytes_read=579105 bytes_retransmit=9 bytes_invalid=0 send_seq=6186 receive_seq=6186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996542 heater_bed: target=60 temp=36.1 pwm=1.000 rpi: temp=54.5 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.06 cputime=99.634 memavail=1628552 print_time=11822.088 buffer_time=0.000 print_stall=0 extruder: target=220 temp=107.3 pwm=1.000
Stats 11815.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=63524 bytes_read=579286 bytes_retransmit=9 bytes_invalid=0 send_seq=6193 receive_seq=6193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=71996542 heater_bed: target=60 temp=37.7 pwm=1.000 rpi: temp=53.6 mcu_temp: temp=26.3 sd_pos=1519 sysload=0.06 cputime=99.670 memavail=1629076 print_time=11823.090 buffer_time=0.000 print_stall=0 extruder: target=220 temp=110.2 pwm=1.000
Stats 11816.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=63606 bytes_read=579487 bytes_retransmit=9 bytes_invalid=0 send_seq=6198 receive_seq=6198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=71996542 heater_bed: target=60 temp=38.0 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.4 sd_pos=1519 sysload=0.06 cputime=99.705 memavail=1628804 print_time=11824.093 buffer_time=0.000 print_stall=0 extruder: target=220 temp=111.7 pwm=1.000
Stats 11817.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000030 bytes_write=63692 bytes_read=579673 bytes_retransmit=9 bytes_invalid=0 send_seq=6203 receive_seq=6203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996542 heater_bed: target=60 temp=38.0 pwm=1.000 rpi: temp=55.5 mcu_temp: temp=26.8 sd_pos=1519 sysload=0.06 cputime=99.739 memavail=1628720 print_time=11825.091 buffer_time=0.000 print_stall=0 extruder: target=220 temp=114.5 pwm=1.000
Stats 11818.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000031 bytes_write=63768 bytes_read=579859 bytes_retransmit=9 bytes_invalid=0 send_seq=6208 receive_seq=6208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=38.1 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.06 cputime=99.763 memavail=1628456 print_time=11826.092 buffer_time=0.000 print_stall=0 extruder: target=220 temp=116.8 pwm=1.000
Stats 11819.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000031 bytes_write=63855 bytes_read=580065 bytes_retransmit=9 bytes_invalid=0 send_seq=6214 receive_seq=6214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=38.2 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.6 sd_pos=1519 sysload=0.05 cputime=99.796 memavail=1628892 print_time=11827.092 buffer_time=0.000 print_stall=0 extruder: target=220 temp=118.7 pwm=1.000
Stats 11820.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000031 bytes_write=63923 bytes_read=580251 bytes_retransmit=9 bytes_invalid=0 send_seq=6219 receive_seq=6219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=38.5 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.5 sd_pos=1519 sysload=0.05 cputime=99.831 memavail=1628984 print_time=11828.093 buffer_time=0.000 print_stall=0 extruder: target=220 temp=121.6 pwm=1.000
Stats 11821.1: gcodein=0 mcu: mcu_awake=0.004 mcu_task_avg=0.000016 mcu_task_stddev=0.000031 bytes_write=64003 bytes_read=580422 bytes_retransmit=9 bytes_invalid=0 send_seq=6224 receive_seq=6224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=71996543 heater_bed: target=60 temp=39.0 pwm=1.000 rpi: temp=54.0 mcu_temp: temp=26.7 sd_pos=1519 sysload=0.05 cputime=99.864 memavail=1628648 print_time=11829.094 buffer_time=0.000 print_stall=0 extruder: target=220 temp=123.6 pwm=1.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-218-gf8afe49a'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 12:34:31 2021 (1640950471.3 20.5)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041713648: New connection
webhooks client 3041713648: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
mcu 'mcu': got {'#receive_time': 22.120289801, u'next_clock': 3766315392L, u'oid': 17, u'value': 29954, '#name': u'analog_in_state', '#sent_time': 22.114654357}
mcu 'mcu': got {'#receive_time': 22.15034206, u'next_clock': 3768475392L, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 22.114654357}
mcu 'mcu': got {'#receive_time': 22.213238357, u'next_clock': 3772795392L, u'oid': 26, u'value': 10413, '#name': u'analog_in_state', '#sent_time': 22.165498283}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 162, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 723, in _connect
    config_params = self._send_get_config()
  File "/home/pi/klipper/klippy/mcu.py", line 710, in _send_get_config
    self._name,))
error: Can not update MCU 'mcu' config as it is shutdown
Build file /home/pi/klipper/klippy/../.config(2512): Thu Nov 18 18:30:11 2021
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32f103xe"
CONFIG_CLOCK_FREQ=72000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_START=0x8007000
CONFIG_FLASH_SIZE=0x10000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x5000
CONFIG_STACK_SIZE=512
CONFIG_STM32_SELECT=y
CONFIG_MACH_STM32F103=y
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32H750 is not set
CONFIG_MACH_STM32F1=y
CONFIG_HAVE_STM32_USBFS=y
CONFIG_HAVE_STM32_CANBUS=y
# CONFIG_STM32_FLASH_START_2000 is not set
# CONFIG_STM32_FLASH_START_5000 is not set
CONFIG_STM32_FLASH_START_7000=y
# CONFIG_STM32_FLASH_START_8000 is not set
# CONFIG_STM32_FLASH_START_8800 is not set
# CONFIG_STM32_FLASH_START_10000 is not set
# CONFIG_STM32_FLASH_START_800 is not set
# CONFIG_STM32_FLASH_START_4000 is not set
# CONFIG_STM32_FLASH_START_0000 is not set
CONFIG_STM32_CLOCK_REF_8M=y
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_25M is not set
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=8000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PB8_PB9 is not set
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_INITIAL_PINS="!PC13"
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(6817): Thu Nov 18 18:30:24 2021
Last MCU build version: v0.10.0-130-g68c92991
Last MCU build tools: gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1
Last MCU build config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 RESERVE_PINS_USB=PA11,PA12 BUS_PINS_i2c1a=PB8,PB9 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 PWM_MAX=255 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 CLOCK_FREQ=72000000
Build file /home/pi/klipper/klippy/../out/klipper.elf(268896): Thu Nov 18 18:30:30 2021
mcu 'mcu': got {'#receive_time': 22.420345801, u'next_clock': 3787915392L, u'oid': 17, u'value': 29936, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 22.450351875, u'next_clock': 3790075392L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 22.510344801, u'next_clock': 3794395392L, u'oid': 26, u'value': 10430, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 22.720366079, u'next_clock': 3809515392L, u'oid': 17, u'value': 29949, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 22.750382486, u'next_clock': 3811675392L, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 22.81038356, u'next_clock': 3815995392L, u'oid': 26, u'value': 10475, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 23.020445282, u'next_clock': 3831115392L, u'oid': 17, u'value': 29958, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 23.050378078, u'next_clock': 3833275392L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 23.110378782, u'next_clock': 3837595392L, u'oid': 26, u'value': 10501, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 23.320373893, u'next_clock': 3852715392L, u'oid': 17, u'value': 29959, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 23.350371078, u'next_clock': 3854875392L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 22.37484919}
mcu 'mcu': got {'#receive_time': 23.410371004, u'next_clock': 3859195392L, u'oid': 26, u'value': 10531, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 23.620381541, u'next_clock': 3874315392L, u'oid': 17, u'value': 29958, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 23.650377763, u'next_clock': 3876475392L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 23.710385208, u'next_clock': 3880795392L, u'oid': 26, u'value': 10549, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 23.920442745, u'next_clock': 3895915392L, u'oid': 17, u'value': 29954, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 23.950415689, u'next_clock': 3898075392L, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 24.010417393, u'next_clock': 3902395392L, u'oid': 26, u'value': 10581, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 24.223159318, u'next_clock': 3917515392L, u'oid': 17, u'value': 29953, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 24.250459152, u'next_clock': 3919675392L, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 24.310468763, u'next_clock': 3923995392L, u'oid': 26, u'value': 10617, '#name': u'analog_in_state', '#sent_time': 23.359412949}
mcu 'mcu': got {'#receive_time': 24.520427929, u'next_clock': 3939115392L, u'oid': 17, u'value': 29964, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 24.550424244, u'next_clock': 3941275392L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 24.610453652, u'next_clock': 3945595392L, u'oid': 26, u'value': 10637, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 24.820428577, u'next_clock': 3960715392L, u'oid': 17, u'value': 29958, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 24.85045004, u'next_clock': 3962875392L, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 24.910481448, u'next_clock': 3967195392L, u'oid': 26, u'value': 10678, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 25.120445392, u'next_clock': 3982315392L, u'oid': 17, u'value': 29974, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 25.150464614, u'next_clock': 3984475392L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 25.210549929, u'next_clock': 3988795392L, u'oid': 26, u'value': 10704, '#name': u'analog_in_state', '#sent_time': 24.344124744}
mcu 'mcu': got {'#receive_time': 25.420512762, u'next_clock': 4003915392L, u'oid': 17, u'value': 29981, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 25.450644947, u'next_clock': 4006075392L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 25.510486633, u'next_clock': 4010395392L, u'oid': 26, u'value': 10738, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 25.720468281, u'next_clock': 4025515392L, u'oid': 17, u'value': 29961, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 25.750467466, u'next_clock': 4027675392L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 25.810470225, u'next_clock': 4031995392L, u'oid': 26, u'value': 10757, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 26.020567169, u'next_clock': 4047115392L, u'oid': 17, u'value': 29962, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 26.050475151, u'next_clock': 4049275392L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 26.110486632, u'next_clock': 4053595392L, u'oid': 26, u'value': 10796, '#name': u'analog_in_state', '#sent_time': 25.329074133}
mcu 'mcu': got {'#receive_time': 26.320476206, u'next_clock': 4068715392L, u'oid': 17, u'value': 29968, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.350524299, u'next_clock': 4070875392L, u'oid': 20, u'value': 14133, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.410532021, u'next_clock': 4075195392L, u'oid': 26, u'value': 10836, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.620517039, u'next_clock': 4090315392L, u'oid': 17, u'value': 29972, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.650493354, u'next_clock': 4092475392L, u'oid': 20, u'value': 14124, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.710498947, u'next_clock': 4096795392L, u'oid': 26, u'value': 10868, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.920543261, u'next_clock': 4111915392L, u'oid': 17, u'value': 29958, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 26.950509113, u'next_clock': 4114075392L, u'oid': 20, u'value': 14119, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 27.010554187, u'next_clock': 4118395392L, u'oid': 26, u'value': 10899, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 27.220638317, u'next_clock': 4133515392L, u'oid': 17, u'value': 29968, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 27.250604502, u'next_clock': 4135675392L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 26.313940706}
mcu 'mcu': got {'#receive_time': 27.310589983, u'next_clock': 4139995392L, u'oid': 26, u'value': 10930, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 27.520644687, u'next_clock': 4155115392L, u'oid': 17, u'value': 29969, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 27.550651187, u'next_clock': 4157275392L, u'oid': 20, u'value': 14122, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 27.610633761, u'next_clock': 4161595392L, u'oid': 26, u'value': 10965, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 27.820739742, u'next_clock': 4176715392L, u'oid': 17, u'value': 29964, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 27.850638631, u'next_clock': 4178875392L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 27.910645001, u'next_clock': 4183195392L, u'oid': 26, u'value': 10997, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 28.120656112, u'next_clock': 4198315392L, u'oid': 17, u'value': 29965, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 28.150718372, u'next_clock': 4200475392L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 28.210691038, u'next_clock': 4204795392L, u'oid': 26, u'value': 11028, '#name': u'analog_in_state', '#sent_time': 27.298993372}
mcu 'mcu': got {'#receive_time': 28.42064426, u'next_clock': 4219915392L, u'oid': 17, u'value': 29961, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 28.450633409, u'next_clock': 4222075392L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 28.510672057, u'next_clock': 4226395392L, u'oid': 26, u'value': 11049, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 28.720709057, u'next_clock': 4241515392L, u'oid': 17, u'value': 29966, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 28.750698223, u'next_clock': 4243675392L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 28.810774834, u'next_clock': 4247995392L, u'oid': 26, u'value': 11084, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 29.020707519, u'next_clock': 4263115392L, u'oid': 17, u'value': 29963, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 29.050696593, u'next_clock': 4265275392L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 29.110692593, u'next_clock': 4269595392L, u'oid': 26, u'value': 11120, '#name': u'analog_in_state', '#sent_time': 28.283246223}
mcu 'mcu': got {'#receive_time': 29.320677334, u'next_clock': 4284715392L, u'oid': 17, u'value': 29967, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.350659908, u'next_clock': 4286875392L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.410723908, u'next_clock': 4291195392L, u'oid': 26, u'value': 11152, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.62073663, u'next_clock': 11348096, u'oid': 17, u'value': 29964, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.650729204, u'next_clock': 13508096, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.710726389, u'next_clock': 17828096, u'oid': 26, u'value': 11175, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.920841093, u'next_clock': 32948096, u'oid': 17, u'value': 29968, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 29.950760815, u'next_clock': 35108096, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 30.010750463, u'next_clock': 39428096, u'oid': 26, u'value': 11229, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 30.220853463, u'next_clock': 54548096, u'oid': 17, u'value': 29970, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 30.250805593, u'next_clock': 56708096, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 29.267667482}
mcu 'mcu': got {'#receive_time': 30.310777537, u'next_clock': 61028096, u'oid': 26, u'value': 11256, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 30.520698889, u'next_clock': 76148096, u'oid': 17, u'value': 29978, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 30.550684278, u'next_clock': 78308096, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 30.610704889, u'next_clock': 82628096, u'oid': 26, u'value': 11278, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 30.820767926, u'next_clock': 97748096, u'oid': 17, u'value': 29975, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 30.850697777, u'next_clock': 99908096, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 30.910697148, u'next_clock': 104228096, u'oid': 26, u'value': 11318, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 31.120791425, u'next_clock': 119348096, u'oid': 17, u'value': 29985, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 31.150809018, u'next_clock': 121508096, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 31.210843722, u'next_clock': 125828096, u'oid': 26, u'value': 11346, '#name': u'analog_in_state', '#sent_time': 30.251983852}
mcu 'mcu': got {'#receive_time': 31.420798555, u'next_clock': 140948096, u'oid': 17, u'value': 29977, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 31.450817407, u'next_clock': 143108096, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 31.510806073, u'next_clock': 147428096, u'oid': 26, u'value': 11371, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 31.720825092, u'next_clock': 162548096, u'oid': 17, u'value': 29968, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 31.750834166, u'next_clock': 164708096, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 31.810846999, u'next_clock': 169028096, u'oid': 26, u'value': 11412, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 32.020842795, u'next_clock': 184148096, u'oid': 17, u'value': 29982, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 32.050825999, u'next_clock': 186308096, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 32.110831851, u'next_clock': 190628096, u'oid': 26, u'value': 11431, '#name': u'analog_in_state', '#sent_time': 31.237113203}
mcu 'mcu': got {'#receive_time': 32.320791369, u'next_clock': 205748096, u'oid': 17, u'value': 29974, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.350765388, u'next_clock': 207908096, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.410780906, u'next_clock': 212228096, u'oid': 26, u'value': 11499, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.620831295, u'next_clock': 227348096, u'oid': 17, u'value': 30000, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.650797925, u'next_clock': 229508096, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.71078635, u'next_clock': 233828096, u'oid': 26, u'value': 11524, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.920838332, u'next_clock': 248948096, u'oid': 17, u'value': 29991, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 32.950806813, u'next_clock': 251108096, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 33.010801165, u'next_clock': 255428096, u'oid': 26, u'value': 11543, '#name': u'analog_in_state', '#sent_time': 32.221653906}
mcu 'mcu': got {'#receive_time': 33.220925258, u'next_clock': 270548096, u'oid': 17, u'value': 29987, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.250902257999996, u'next_clock': 272708096, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.310899165, u'next_clock': 277028096, u'oid': 26, u'value': 11578, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.52092635, u'next_clock': 292148096, u'oid': 17, u'value': 29989, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.550920794, u'next_clock': 294308096, u'oid': 20, u'value': 14120, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.610946276, u'next_clock': 298628096, u'oid': 26, u'value': 11614, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.821021868, u'next_clock': 313748096, u'oid': 17, u'value': 29971, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.850987498, u'next_clock': 315908096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 33.910965016, u'next_clock': 320228096, u'oid': 26, u'value': 11647, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 34.120994109, u'next_clock': 335348096, u'oid': 17, u'value': 29976, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 34.151019276, u'next_clock': 337508096, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 33.20580735}
mcu 'mcu': got {'#receive_time': 34.210958424, u'next_clock': 341828096, u'oid': 26, u'value': 11692, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 34.420900738, u'next_clock': 356948096, u'oid': 17, u'value': 29983, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 34.450880016, u'next_clock': 359108096, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 34.510874886, u'next_clock': 363428096, u'oid': 26, u'value': 11719, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 34.720938886, u'next_clock': 378548096, u'oid': 17, u'value': 29996, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 34.750894646, u'next_clock': 380708096, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 34.810890516, u'next_clock': 385028096, u'oid': 26, u'value': 11750, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 35.020985701, u'next_clock': 400148096, u'oid': 17, u'value': 29986, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 35.050985997, u'next_clock': 402308096, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 35.110991368, u'next_clock': 406628096, u'oid': 26, u'value': 11777, '#name': u'analog_in_state', '#sent_time': 34.19013972}
mcu 'mcu': got {'#receive_time': 35.321005108, u'next_clock': 421748096, u'oid': 17, u'value': 29982, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.350949849, u'next_clock': 423908096, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.410957682, u'next_clock': 428228096, u'oid': 26, u'value': 11823, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.621017849, u'next_clock': 443348096, u'oid': 17, u'value': 29987, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.651024867, u'next_clock': 445508096, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.711073275, u'next_clock': 449828096, u'oid': 26, u'value': 11849, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.921022071, u'next_clock': 464948096, u'oid': 17, u'value': 29977, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 35.951063311, u'next_clock': 467108096, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 36.011027034, u'next_clock': 471428096, u'oid': 26, u'value': 11898, '#name': u'analog_in_state', '#sent_time': 35.175160627}
mcu 'mcu': got {'#receive_time': 36.221113404, u'next_clock': 486548096, u'oid': 17, u'value': 29984, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.251136274, u'next_clock': 488708096, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.311069756, u'next_clock': 493028096, u'oid': 26, u'value': 11927, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.521012311, u'next_clock': 508148096, u'oid': 17, u'value': 29997, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.550986311, u'next_clock': 510308096, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.61098207, u'next_clock': 514628096, u'oid': 26, u'value': 11951, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.821095255, u'next_clock': 529748096, u'oid': 17, u'value': 29981, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.850986996, u'next_clock': 531908096, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 36.910997052, u'next_clock': 536228096, u'oid': 26, u'value': 12001, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 37.121012755, u'next_clock': 551348096, u'oid': 17, u'value': 29992, '#name': u'analog_in_state', '#sent_time': 36.159350589}
mcu 'mcu': got {'#receive_time': 37.150990477, u'next_clock': 553508096, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.211041996, u'next_clock': 557828096, u'oid': 26, u'value': 12034, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.421069959, u'next_clock': 572948096, u'oid': 17, u'value': 29995, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.451023977, u'next_clock': 575108096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.511022662, u'next_clock': 579428096, u'oid': 26, u'value': 12069, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.721073347, u'next_clock': 594548096, u'oid': 17, u'value': 29992, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.751084199, u'next_clock': 596708096, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 37.811072977, u'next_clock': 601028096, u'oid': 26, u'value': 12102, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 38.021139921, u'next_clock': 616148096, u'oid': 17, u'value': 29991, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 38.051132329, u'next_clock': 618308096, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 38.111131736, u'next_clock': 622628096, u'oid': 26, u'value': 12128, '#name': u'analog_in_state', '#sent_time': 37.144173626}
mcu 'mcu': got {'#receive_time': 38.32117394, u'next_clock': 637748096, u'oid': 17, u'value': 29997, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.35109194, u'next_clock': 639908096, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.41109844, u'next_clock': 644228096, u'oid': 26, u'value': 12173, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.621156902, u'next_clock': 659348096, u'oid': 17, u'value': 29994, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.651219588000004, u'next_clock': 661508096, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.711155273, u'next_clock': 665828096, u'oid': 26, u'value': 12199, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.921178291, u'next_clock': 680948096, u'oid': 17, u'value': 29989, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 38.951174273, u'next_clock': 683108096, u'oid': 20, u'value': 14121, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 39.011175013, u'next_clock': 687428096, u'oid': 26, u'value': 12232, '#name': u'analog_in_state', '#sent_time': 38.128945921}
mcu 'mcu': got {'#receive_time': 39.221209198, u'next_clock': 702548096, u'oid': 17, u'value': 30008, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.253406735, u'next_clock': 704708096, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.311226569, u'next_clock': 709028096, u'oid': 26, u'value': 12264, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.521127198, u'next_clock': 724148096, u'oid': 17, u'value': 30006, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.551122254, u'next_clock': 726308096, u'oid': 20, u'value': 14120, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.61112268, u'next_clock': 730628096, u'oid': 26, u'value': 12288, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.821211105, u'next_clock': 745748096, u'oid': 17, u'value': 30022, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.851150402, u'next_clock': 747908096, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 39.91113868, u'next_clock': 752228096, u'oid': 26, u'value': 12343, '#name': u'analog_in_state', '#sent_time': 39.113181624}
mcu 'mcu': got {'#receive_time': 40.121226494, u'next_clock': 767348096, u'oid': 17, u'value': 30000, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.15122655, u'next_clock': 769508096, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.211238939, u'next_clock': 773828096, u'oid': 26, u'value': 12377, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.421205216, u'next_clock': 788948096, u'oid': 17, u'value': 29995, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.451161772, u'next_clock': 791108096, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.511169864, u'next_clock': 795428096, u'oid': 26, u'value': 12411, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.721215698, u'next_clock': 810548096, u'oid': 17, u'value': 30009, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.751184568, u'next_clock': 812708096, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 40.811215253, u'next_clock': 817028096, u'oid': 26, u'value': 12446, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 41.021198975, u'next_clock': 832148096, u'oid': 17, u'value': 30014, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 41.05125016, u'next_clock': 834308096, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 40.098130587}
mcu 'mcu': got {'#receive_time': 41.111265938, u'next_clock': 838628096, u'oid': 26, u'value': 12485, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.321283956, u'next_clock': 853748096, u'oid': 17, u'value': 30015, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.351245660000004, u'next_clock': 855908096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.411281716, u'next_clock': 860228096, u'oid': 26, u'value': 12528, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.621380919, u'next_clock': 875348096, u'oid': 17, u'value': 30010, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.651317975, u'next_clock': 877508096, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.71131153, u'next_clock': 881828096, u'oid': 26, u'value': 12553, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.921336734, u'next_clock': 896948096, u'oid': 17, u'value': 30004, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 41.951330308, u'next_clock': 899108096, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 42.011332326, u'next_clock': 903428096, u'oid': 26, u'value': 12590, '#name': u'analog_in_state', '#sent_time': 41.083231179}
mcu 'mcu': got {'#receive_time': 42.221400789, u'next_clock': 918548096, u'oid': 17, u'value': 30011, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.251364771, u'next_clock': 920708096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.311375993, u'next_clock': 925028096, u'oid': 26, u'value': 12619, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.521392585, u'next_clock': 940148096, u'oid': 17, u'value': 30016, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.55130503, u'next_clock': 942308096, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.61139203, u'next_clock': 946628096, u'oid': 26, u'value': 12658, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.821356567, u'next_clock': 961748096, u'oid': 17, u'value': 30022, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.851322418, u'next_clock': 963908096, u'oid': 20, u'value': 14120, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 42.911321678, u'next_clock': 968228096, u'oid': 26, u'value': 12689, '#name': u'analog_in_state', '#sent_time': 42.067632937}
mcu 'mcu': got {'#receive_time': 43.121330992, u'next_clock': 983348096, u'oid': 17, u'value': 30011, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.1513099, u'next_clock': 985508096, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.211330307, u'next_clock': 989828096, u'oid': 26, u'value': 12725, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.421393585, u'next_clock': 1004948096, u'oid': 17, u'value': 30018, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.451368177, u'next_clock': 1007108096, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.511354881, u'next_clock': 1011428096, u'oid': 26, u'value': 12769, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.721419733, u'next_clock': 1026548096, u'oid': 17, u'value': 30019, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.751387511, u'next_clock': 1028708096, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 43.811428548, u'next_clock': 1033028096, u'oid': 26, u'value': 12790, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 44.02142701, u'next_clock': 1048148096, u'oid': 17, u'value': 30024, '#name': u'analog_in_state', '#sent_time': 43.051895622}
mcu 'mcu': got {'#receive_time': 44.051355955, u'next_clock': 1050308096, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.111377714, u'next_clock': 1054628096, u'oid': 26, u'value': 12811, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.321386825, u'next_clock': 1069748096, u'oid': 17, u'value': 30023, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.351378695, u'next_clock': 1071908096, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.411404084, u'next_clock': 1076228096, u'oid': 26, u'value': 12870, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.621431714, u'next_clock': 1091348096, u'oid': 17, u'value': 30006, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.651382121, u'next_clock': 1093508096, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.711390454, u'next_clock': 1097828096, u'oid': 26, u'value': 12901, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.921420065, u'next_clock': 1112948096, u'oid': 17, u'value': 30028, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 44.951416936, u'next_clock': 1115108096, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 45.011482325, u'next_clock': 1119428096, u'oid': 26, u'value': 12932, '#name': u'analog_in_state', '#sent_time': 44.036899418}
mcu 'mcu': got {'#receive_time': 45.222404399, u'next_clock': 1134548096, u'oid': 17, u'value': 30014, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.251963121, u'next_clock': 1136708096, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.311426954, u'next_clock': 1141028096, u'oid': 26, u'value': 12968, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.521420417, u'next_clock': 1156148096, u'oid': 17, u'value': 30028, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.551446343, u'next_clock': 1158308096, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.611435139, u'next_clock': 1162628096, u'oid': 26, u'value': 13006, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.821476917, u'next_clock': 1177748096, u'oid': 17, u'value': 30019, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.851441806, u'next_clock': 1179908096, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 45.911448917, u'next_clock': 1184228096, u'oid': 26, u'value': 13043, '#name': u'analog_in_state', '#sent_time': 45.021830991}
mcu 'mcu': got {'#receive_time': 46.121469213, u'next_clock': 1199348096, u'oid': 17, u'value': 30020, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.15146075, u'next_clock': 1201508096, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.21157625, u'next_clock': 1205828096, u'oid': 26, u'value': 13081, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.421548194, u'next_clock': 1220948096, u'oid': 17, u'value': 30036, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.451516731, u'next_clock': 1223108096, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.511543139, u'next_clock': 1227428096, u'oid': 26, u'value': 13103, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.721541805, u'next_clock': 1242548096, u'oid': 17, u'value': 30026, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.751577657, u'next_clock': 1244708096, u'oid': 20, u'value': 14121, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 46.811546861, u'next_clock': 1249028096, u'oid': 26, u'value': 13156, '#name': u'analog_in_state', '#sent_time': 46.006783324}
mcu 'mcu': got {'#receive_time': 47.021567786, u'next_clock': 1264148096, u'oid': 17, u'value': 30021, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.051543805, u'next_clock': 1266308096, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.111538768, u'next_clock': 1270628096, u'oid': 26, u'value': 13181, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.321563231, u'next_clock': 1285748096, u'oid': 17, u'value': 30017, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.351524527, u'next_clock': 1287908096, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.411540101, u'next_clock': 1292228096, u'oid': 26, u'value': 13224, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.621668156, u'next_clock': 1307348096, u'oid': 17, u'value': 30015, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.651566119, u'next_clock': 1309508096, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.711564823, u'next_clock': 1313828096, u'oid': 26, u'value': 13254, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.921591156, u'next_clock': 1328948096, u'oid': 17, u'value': 30024, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 47.951589175, u'next_clock': 1331108096, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 46.990958916}
mcu 'mcu': got {'#receive_time': 48.011605878, u'next_clock': 1335428096, u'oid': 26, u'value': 13314, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.221612989, u'next_clock': 1350548096, u'oid': 17, u'value': 30030, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.251841841, u'next_clock': 1352708096, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.311604563, u'next_clock': 1357028096, u'oid': 26, u'value': 13341, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.521657508, u'next_clock': 1372148096, u'oid': 17, u'value': 30029, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.551618248, u'next_clock': 1374308096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.611617211, u'next_clock': 1378628096, u'oid': 26, u'value': 13364, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.821659878, u'next_clock': 1393748096, u'oid': 17, u'value': 30024, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.851621582, u'next_clock': 1395908096, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 48.911634489, u'next_clock': 1400228096, u'oid': 26, u'value': 13407, '#name': u'analog_in_state', '#sent_time': 47.975149693}
mcu 'mcu': got {'#receive_time': 49.121647822, u'next_clock': 1415348096, u'oid': 17, u'value': 30028, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.151640989, u'next_clock': 1417508096, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.211645915, u'next_clock': 1421828096, u'oid': 26, u'value': 13438, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.421646044, u'next_clock': 1436948096, u'oid': 17, u'value': 30041, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.451673359, u'next_clock': 1439108096, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.511697933, u'next_clock': 1443428096, u'oid': 26, u'value': 13471, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.721668729, u'next_clock': 1458548096, u'oid': 17, u'value': 30044, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.751676285, u'next_clock': 1460708096, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 49.811737266, u'next_clock': 1465028096, u'oid': 26, u'value': 13521, '#name': u'analog_in_state', '#sent_time': 48.959414304}
mcu 'mcu': got {'#receive_time': 50.021724859, u'next_clock': 1480148096, u'oid': 17, u'value': 30040, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.051687099, u'next_clock': 1482308096, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.111685396, u'next_clock': 1486628096, u'oid': 26, u'value': 13551, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.321695451, u'next_clock': 1501748096, u'oid': 17, u'value': 30046, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.351741655, u'next_clock': 1503908096, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.411667488, u'next_clock': 1508228096, u'oid': 26, u'value': 13584, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.621855877, u'next_clock': 1523348096, u'oid': 17, u'value': 30045, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.651704118, u'next_clock': 1525508096, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.711715118, u'next_clock': 1529828096, u'oid': 26, u'value': 13621, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.921735506, u'next_clock': 1544948096, u'oid': 17, u'value': 30040, '#name': u'analog_in_state', '#sent_time': 49.943610951}
mcu 'mcu': got {'#receive_time': 50.951722821, u'next_clock': 1547108096, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.011764858, u'next_clock': 1551428096, u'oid': 26, u'value': 13652, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.221767469, u'next_clock': 1566548096, u'oid': 17, u'value': 30047, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.251796636, u'next_clock': 1568708096, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.311750543, u'next_clock': 1573028096, u'oid': 26, u'value': 13683, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.521823932, u'next_clock': 1588148096, u'oid': 17, u'value': 30038, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.551764302, u'next_clock': 1590308096, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.611801321, u'next_clock': 1594628096, u'oid': 26, u'value': 13714, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.821799246, u'next_clock': 1609748096, u'oid': 17, u'value': 30042, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.851771339, u'next_clock': 1611908096, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 51.911770691, u'next_clock': 1616228096, u'oid': 26, u'value': 13761, '#name': u'analog_in_state', '#sent_time': 50.927806506}
mcu 'mcu': got {'#receive_time': 52.121845043, u'next_clock': 1631348096, u'oid': 17, u'value': 30040, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.151799635, u'next_clock': 1633508096, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.211794728, u'next_clock': 1637828096, u'oid': 26, u'value': 13794, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.421845376, u'next_clock': 1652948096, u'oid': 17, u'value': 30042, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.451807394, u'next_clock': 1655108096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.511803913, u'next_clock': 1659428096, u'oid': 26, u'value': 13810, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.721821116, u'next_clock': 1674548096, u'oid': 17, u'value': 30040, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.751811653, u'next_clock': 1676708096, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 52.811847153, u'next_clock': 1681028096, u'oid': 26, u'value': 13868, '#name': u'analog_in_state', '#sent_time': 51.912048265}
mcu 'mcu': got {'#receive_time': 53.021865116, u'next_clock': 1696148096, u'oid': 17, u'value': 30033, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.051820894, u'next_clock': 1698308096, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.111828449, u'next_clock': 1702628096, u'oid': 26, u'value': 13906, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.321859949, u'next_clock': 1717748096, u'oid': 17, u'value': 30034, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.351828468, u'next_clock': 1719908096, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.411873208, u'next_clock': 1724228096, u'oid': 26, u'value': 13943, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.621923171, u'next_clock': 1739348096, u'oid': 17, u'value': 30046, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.651891301, u'next_clock': 1741508096, u'oid': 20, u'value': 14083, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.711905134, u'next_clock': 1745828096, u'oid': 26, u'value': 13972, '#name': u'analog_in_state', '#sent_time': 52.897112042}
mcu 'mcu': got {'#receive_time': 53.921867949, u'next_clock': 1760948096, u'oid': 17, u'value': 30046, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 53.951870727, u'next_clock': 1763108096, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.011907893, u'next_clock': 1767428096, u'oid': 26, u'value': 14009, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.221909282, u'next_clock': 1782548096, u'oid': 17, u'value': 30061, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.251940578, u'next_clock': 1784708096, u'oid': 20, u'value': 14078, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.311901189, u'next_clock': 1789028096, u'oid': 26, u'value': 14072, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.521975708, u'next_clock': 1804148096, u'oid': 17, u'value': 30044, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.551905189, u'next_clock': 1806308096, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.611938023, u'next_clock': 1810628096, u'oid': 26, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.821941782, u'next_clock': 1825748096, u'oid': 17, u'value': 30051, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.851914967, u'next_clock': 1827908096, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 53.882317208}
mcu 'mcu': got {'#receive_time': 54.911909671000004, u'next_clock': 1832228096, u'oid': 26, u'value': 14124, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.121926985, u'next_clock': 1847348096, u'oid': 17, u'value': 30059, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.151931559, u'next_clock': 1849508096, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.211966948, u'next_clock': 1853828096, u'oid': 26, u'value': 14151, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.422031078, u'next_clock': 1868948096, u'oid': 17, u'value': 30052, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.45189467, u'next_clock': 1871108096, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.511888781, u'next_clock': 1875428096, u'oid': 26, u'value': 14191, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.72219917, u'next_clock': 1890548096, u'oid': 17, u'value': 30051, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.75200504, u'next_clock': 1892708096, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 55.811967189, u'next_clock': 1897028096, u'oid': 26, u'value': 14225, '#name': u'analog_in_state', '#sent_time': 54.866559763}
mcu 'mcu': got {'#receive_time': 56.021941188, u'next_clock': 1912148096, u'oid': 17, u'value': 30052, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.051922151, u'next_clock': 1914308096, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.111911059, u'next_clock': 1918628096, u'oid': 26, u'value': 14260, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.321945299, u'next_clock': 1933748096, u'oid': 17, u'value': 30054, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.351975447, u'next_clock': 1935908096, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.41193167, u'next_clock': 1940228096, u'oid': 26, u'value': 14302, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.621993021, u'next_clock': 1955348096, u'oid': 17, u'value': 30064, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.651951873, u'next_clock': 1957508096, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.711942484, u'next_clock': 1961828096, u'oid': 26, u'value': 14326, '#name': u'analog_in_state', '#sent_time': 55.851634651}
mcu 'mcu': got {'#receive_time': 56.921945651, u'next_clock': 1976948096, u'oid': 17, u'value': 30031, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 56.951978021, u'next_clock': 1979108096, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.011968558, u'next_clock': 1983428096, u'oid': 26, u'value': 14378, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.222019651, u'next_clock': 1998548096, u'oid': 17, u'value': 30061, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.252003688, u'next_clock': 2000708096, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.311994336, u'next_clock': 2005028096, u'oid': 26, u'value': 14409, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.522143873, u'next_clock': 2020148096, u'oid': 17, u'value': 30047, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.552067373, u'next_clock': 2022308096, u'oid': 20, u'value': 14080, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.612117076, u'next_clock': 2026628096, u'oid': 26, u'value': 14434, '#name': u'analog_in_state', '#sent_time': 56.836276299}
mcu 'mcu': got {'#receive_time': 57.822049965, u'next_clock': 2041748096, u'oid': 17, u'value': 30058, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 57.852119428, u'next_clock': 2043908096, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 57.912088539, u'next_clock': 2048228096, u'oid': 26, u'value': 14459, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.122093261, u'next_clock': 2063348096, u'oid': 17, u'value': 30054, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.152096558, u'next_clock': 2065508096, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.212137817, u'next_clock': 2069828096, u'oid': 26, u'value': 14504, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.42224415, u'next_clock': 2084948096, u'oid': 17, u'value': 30069, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.452124687, u'next_clock': 2087108096, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.512115742, u'next_clock': 2091428096, u'oid': 26, u'value': 14545, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.722128242, u'next_clock': 2106548096, u'oid': 17, u'value': 30058, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.752136113, u'next_clock': 2108708096, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 57.821198002}
mcu 'mcu': got {'#receive_time': 58.81211889, u'next_clock': 2113028096, u'oid': 26, u'value': 14597, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.022176909, u'next_clock': 2128148096, u'oid': 17, u'value': 30059, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.052142687, u'next_clock': 2130308096, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.112134205, u'next_clock': 2134628096, u'oid': 26, u'value': 14610, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.322239761, u'next_clock': 2149748096L, u'oid': 17, u'value': 30062, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.352117261, u'next_clock': 2151908096L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.412115612, u'next_clock': 2156228096L, u'oid': 26, u'value': 14654, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.622193186, u'next_clock': 2171348096L, u'oid': 17, u'value': 30061, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.65214826, u'next_clock': 2173508096L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.712141297, u'next_clock': 2177828096L, u'oid': 26, u'value': 14690, '#name': u'analog_in_state', '#sent_time': 58.806326076}
mcu 'mcu': got {'#receive_time': 59.922158982, u'next_clock': 2192948096L, u'oid': 17, u'value': 30055, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 59.952174705, u'next_clock': 2195108096L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.012185223, u'next_clock': 2199428096L, u'oid': 26, u'value': 14721, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.222195723, u'next_clock': 2214548096L, u'oid': 17, u'value': 30075, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.252201686, u'next_clock': 2216708096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.312302241, u'next_clock': 2221028096L, u'oid': 26, u'value': 14762, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.522280149, u'next_clock': 2236148096L, u'oid': 17, u'value': 30066, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.552195223, u'next_clock': 2238308096L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.612190038, u'next_clock': 2242628096L, u'oid': 26, u'value': 14785, '#name': u'analog_in_state', '#sent_time': 59.790541816}
mcu 'mcu': got {'#receive_time': 60.822221297, u'next_clock': 2257748096L, u'oid': 17, u'value': 30099, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 60.852203982, u'next_clock': 2259908096L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 60.912212611, u'next_clock': 2264228096L, u'oid': 26, u'value': 14828, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.122201574, u'next_clock': 2279348096L, u'oid': 17, u'value': 30078, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.152276463, u'next_clock': 2281508096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.212217667, u'next_clock': 2285828096L, u'oid': 26, u'value': 14852, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.422321093, u'next_clock': 2300948096L, u'oid': 17, u'value': 30060, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.452185204, u'next_clock': 2303108096L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.512232074, u'next_clock': 2307428096L, u'oid': 26, u'value': 14858, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.722267481, u'next_clock': 2322548096L, u'oid': 17, u'value': 30076, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.752285611, u'next_clock': 2324708096L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 60.77469976}
mcu 'mcu': got {'#receive_time': 61.812267592, u'next_clock': 2329028096L, u'oid': 26, u'value': 14927, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.022378166, u'next_clock': 2344148096L, u'oid': 17, u'value': 30079, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.052242426, u'next_clock': 2346308096L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.112250129, u'next_clock': 2350628096L, u'oid': 26, u'value': 14973, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.322322092, u'next_clock': 2365748096L, u'oid': 17, u'value': 30077, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.352253703, u'next_clock': 2367908096L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.412239092, u'next_clock': 2372228096L, u'oid': 26, u'value': 14996, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.622351351, u'next_clock': 2387348096L, u'oid': 17, u'value': 30091, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.652251684, u'next_clock': 2389508096L, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.71227787, u'next_clock': 2393828096L, u'oid': 26, u'value': 15052, '#name': u'analog_in_state', '#sent_time': 61.759109666}
mcu 'mcu': got {'#receive_time': 62.922273888, u'next_clock': 2408948096L, u'oid': 17, u'value': 30076, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 62.952285555, u'next_clock': 2411108096L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.012274777, u'next_clock': 2415428096L, u'oid': 26, u'value': 15096, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.222406943, u'next_clock': 2430548096L, u'oid': 17, u'value': 30075, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.252385999, u'next_clock': 2432708096L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.312303591, u'next_clock': 2437028096L, u'oid': 26, u'value': 15113, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.522342128, u'next_clock': 2452148096L, u'oid': 17, u'value': 30077, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.552399851, u'next_clock': 2454308096L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.612350628, u'next_clock': 2458628096L, u'oid': 26, u'value': 15149, '#name': u'analog_in_state', '#sent_time': 62.743200555}
mcu 'mcu': got {'#receive_time': 63.822379591, u'next_clock': 2473748096L, u'oid': 17, u'value': 30092, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 63.852309036, u'next_clock': 2475908096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 63.912316369, u'next_clock': 2480228096L, u'oid': 26, u'value': 15191, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.122328943, u'next_clock': 2495348096L, u'oid': 17, u'value': 30097, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.152350647, u'next_clock': 2497508096L, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.212327406, u'next_clock': 2501828096L, u'oid': 26, u'value': 15223, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.422515683, u'next_clock': 2516948096L, u'oid': 17, u'value': 30080, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.45235985, u'next_clock': 2519108096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.512380554, u'next_clock': 2523428096L, u'oid': 26, u'value': 15243, '#name': u'analog_in_state', '#sent_time': 63.728078369}
mcu 'mcu': got {'#receive_time': 64.72232972, u'next_clock': 2538548096L, u'oid': 17, u'value': 30087, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 64.752361517, u'next_clock': 2540708096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 64.812332313, u'next_clock': 2545028096L, u'oid': 26, u'value': 15310, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.022390387, u'next_clock': 2560148096L, u'oid': 17, u'value': 30094, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.05233409, u'next_clock': 2562308096L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.112341646, u'next_clock': 2566628096L, u'oid': 26, u'value': 15347, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.32247159, u'next_clock': 2581748096L, u'oid': 17, u'value': 30093, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.352380553, u'next_clock': 2583908096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.412397812, u'next_clock': 2588228096L, u'oid': 26, u'value': 15369, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.622485516, u'next_clock': 2603348096L, u'oid': 17, u'value': 30088, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.652425757, u'next_clock': 2605508096L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 64.712963924}
mcu 'mcu': got {'#receive_time': 65.712430368, u'next_clock': 2609828096L, u'oid': 26, u'value': 15391, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 65.922467701, u'next_clock': 2624948096L, u'oid': 17, u'value': 30098, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 65.952451201, u'next_clock': 2627108096L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.012475794, u'next_clock': 2631428096L, u'oid': 26, u'value': 15432, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.22253346, u'next_clock': 2646548096L, u'oid': 17, u'value': 30079, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.252493997, u'next_clock': 2648708096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.312483812, u'next_clock': 2653028096L, u'oid': 26, u'value': 15464, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.522584275, u'next_clock': 2668148096L, u'oid': 17, u'value': 30108, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.552481015, u'next_clock': 2670308096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.612472608, u'next_clock': 2674628096L, u'oid': 26, u'value': 15497, '#name': u'analog_in_state', '#sent_time': 65.69796859}
mcu 'mcu': got {'#receive_time': 66.822518589, u'next_clock': 2689748096L, u'oid': 17, u'value': 30088, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 66.852498404, u'next_clock': 2691908096L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 66.912487997, u'next_clock': 2696228096L, u'oid': 26, u'value': 15548, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.12250646, u'next_clock': 2711348096L, u'oid': 17, u'value': 30109, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.15250733, u'next_clock': 2713508096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.212575645, u'next_clock': 2717828096L, u'oid': 26, u'value': 15606, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.422517033, u'next_clock': 2732948096L, u'oid': 17, u'value': 30081, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.452585348, u'next_clock': 2735108096L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.512523885, u'next_clock': 2739428096L, u'oid': 26, u'value': 15628, '#name': u'analog_in_state', '#sent_time': 66.682939849}
mcu 'mcu': got {'#receive_time': 67.722534033, u'next_clock': 2754548096L, u'oid': 17, u'value': 30112, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 67.752534996, u'next_clock': 2756708096L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 67.812545218, u'next_clock': 2761028096L, u'oid': 26, u'value': 15659, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.022552811, u'next_clock': 2776148096L, u'oid': 17, u'value': 30097, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.052550829, u'next_clock': 2778308096L, u'oid': 20, u'value': 14080, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.112569144, u'next_clock': 2782628096L, u'oid': 26, u'value': 15697, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.322683551, u'next_clock': 2797748096L, u'oid': 17, u'value': 30108, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.352506274, u'next_clock': 2799908096L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.412491977, u'next_clock': 2804228096L, u'oid': 26, u'value': 15719, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.622505496, u'next_clock': 2819348096L, u'oid': 17, u'value': 30092, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.652505588, u'next_clock': 2821508096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 67.6680982}
mcu 'mcu': got {'#receive_time': 68.712501273, u'next_clock': 2825828096L, u'oid': 26, u'value': 15742, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 68.922524255, u'next_clock': 2840948096L, u'oid': 17, u'value': 30098, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 68.952535384, u'next_clock': 2843108096L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.012521755, u'next_clock': 2847428096L, u'oid': 26, u'value': 15793, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.22270394, u'next_clock': 2862548096L, u'oid': 17, u'value': 30122, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.252642495, u'next_clock': 2864708096L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.31261081, u'next_clock': 2869028096L, u'oid': 26, u'value': 15833, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.522634217, u'next_clock': 2884148096L, u'oid': 17, u'value': 30112, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.552630977, u'next_clock': 2886308096L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.612650254, u'next_clock': 2890628096L, u'oid': 26, u'value': 15854, '#name': u'analog_in_state', '#sent_time': 68.653046959}
mcu 'mcu': got {'#receive_time': 69.822660717, u'next_clock': 2905748096L, u'oid': 17, u'value': 30137, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 69.852630754, u'next_clock': 2907908096L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 69.912628643, u'next_clock': 2912228096L, u'oid': 26, u'value': 15874, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.122684032, u'next_clock': 2927348096L, u'oid': 17, u'value': 30117, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.152689791, u'next_clock': 2929508096L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.212647254, u'next_clock': 2933828096L, u'oid': 26, u'value': 15936, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.422615569, u'next_clock': 2948948096L, u'oid': 17, u'value': 30115, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.452595384, u'next_clock': 2951108096L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.512603402, u'next_clock': 2955428096L, u'oid': 26, u'value': 15975, '#name': u'analog_in_state', '#sent_time': 69.638049403}
mcu 'mcu': got {'#receive_time': 70.722607587, u'next_clock': 2970548096L, u'oid': 17, u'value': 30121, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 70.752612254, u'next_clock': 2972708096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 70.812617383, u'next_clock': 2977028096L, u'oid': 26, u'value': 16000, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.022639828, u'next_clock': 2992148096L, u'oid': 17, u'value': 30096, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.052698161, u'next_clock': 2994308096L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.112695865, u'next_clock': 2998628096L, u'oid': 26, u'value': 16043, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.322721957, u'next_clock': 3013748096L, u'oid': 17, u'value': 30100, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.35272879, u'next_clock': 3015908096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.412690957, u'next_clock': 3020228096L, u'oid': 26, u'value': 16114, '#name': u'analog_in_state', '#sent_time': 70.622925772}
mcu 'mcu': got {'#receive_time': 71.622710827, u'next_clock': 3035348096L, u'oid': 17, u'value': 30119, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 71.652717624, u'next_clock': 3037508096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 71.712761809, u'next_clock': 3041828096L, u'oid': 26, u'value': 16131, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 71.922743716, u'next_clock': 3056948096L, u'oid': 17, u'value': 30111, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 71.95274892, u'next_clock': 3059108096L, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.012732938, u'next_clock': 3063428096L, u'oid': 26, u'value': 16167, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.222785068, u'next_clock': 3078548096L, u'oid': 17, u'value': 30111, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.252779938, u'next_clock': 3080708096L, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.312725475, u'next_clock': 3085028096L, u'oid': 26, u'value': 16196, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.522881197, u'next_clock': 3100148096L, u'oid': 17, u'value': 30129, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.55276716, u'next_clock': 3102308096L, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 71.607840772}
mcu 'mcu': got {'#receive_time': 72.612755549, u'next_clock': 3106628096L, u'oid': 26, u'value': 16224, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 72.822799475, u'next_clock': 3121748096L, u'oid': 17, u'value': 30121, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 72.852777493, u'next_clock': 3123908096L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 72.912777567, u'next_clock': 3128228096L, u'oid': 26, u'value': 16258, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.122843697, u'next_clock': 3143348096L, u'oid': 17, u'value': 30130, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.152850641, u'next_clock': 3145508096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.212824808, u'next_clock': 3149828096L, u'oid': 26, u'value': 16303, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.422836252, u'next_clock': 3164948096L, u'oid': 17, u'value': 30129, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.45282153, u'next_clock': 3167108096L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.5128044, u'next_clock': 3171428096L, u'oid': 26, u'value': 16343, '#name': u'analog_in_state', '#sent_time': 72.592095234}
mcu 'mcu': got {'#receive_time': 73.722849104, u'next_clock': 3186548096L, u'oid': 17, u'value': 30121, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 73.752823419, u'next_clock': 3188708096L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 73.812844752, u'next_clock': 3193028096L, u'oid': 26, u'value': 16363, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.022849326, u'next_clock': 3208148096L, u'oid': 17, u'value': 30133, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.052835363, u'next_clock': 3210308096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.112865326, u'next_clock': 3214628096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.322856066, u'next_clock': 3229748096L, u'oid': 17, u'value': 30127, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.352849937, u'next_clock': 3231908096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.412847233, u'next_clock': 3236228096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 73.5771794}
mcu 'mcu': got {'#receive_time': 74.622874659, u'next_clock': 3251348096L, u'oid': 17, u'value': 30117, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 74.652861974, u'next_clock': 3253508096L, u'oid': 20, u'value': 14120, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 74.712879566, u'next_clock': 3257828096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 74.922900566, u'next_clock': 3272948096L, u'oid': 17, u'value': 30107, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 74.952921659, u'next_clock': 3275108096L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 75.012961825, u'next_clock': 3279428096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 75.222999788, u'next_clock': 3294548096L, u'oid': 17, u'value': 30157, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 75.253088418, u'next_clock': 3296708096L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 75.312860232, u'next_clock': 3301028096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 75.522852751, u'next_clock': 3316148096L, u'oid': 17, u'value': 30124, '#name': u'analog_in_state', '#sent_time': 74.561496622}
mcu 'mcu': got {'#receive_time': 75.552842547, u'next_clock': 3318308096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 75.612850788, u'next_clock': 3322628096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 75.822875399, u'next_clock': 3337748096L, u'oid': 17, u'value': 30135, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 75.852864621, u'next_clock': 3339908096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 75.912861769, u'next_clock': 3344228096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.122919102, u'next_clock': 3359348096L, u'oid': 17, u'value': 30133, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.152871991, u'next_clock': 3361508096L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.212874028, u'next_clock': 3365828096L, u'oid': 26, u'value': 16376, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.422886565, u'next_clock': 3380948096L, u'oid': 17, u'value': 30132, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.452893898, u'next_clock': 3383108096L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.51292688, u'next_clock': 3387428096L, u'oid': 26, u'value': 16676, '#name': u'analog_in_state', '#sent_time': 75.546405214}
mcu 'mcu': got {'#receive_time': 76.722976917, u'next_clock': 3402548096L, u'oid': 17, u'value': 30121, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 76.753011935, u'next_clock': 3404708096L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 76.813002472, u'next_clock': 3409028096L, u'oid': 26, u'value': 16700, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.023025861, u'next_clock': 3424148096L, u'oid': 17, u'value': 30136, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.05302425, u'next_clock': 3426308096L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.112988583, u'next_clock': 3430628096L, u'oid': 26, u'value': 16742, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.323031676, u'next_clock': 3445748096L, u'oid': 17, u'value': 30142, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.353060731, u'next_clock': 3447908096L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.412966268, u'next_clock': 3452228096L, u'oid': 26, u'value': 16769, '#name': u'analog_in_state', '#sent_time': 76.531098139}
mcu 'mcu': got {'#receive_time': 77.623029027, u'next_clock': 3467348096L, u'oid': 17, u'value': 30140, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 77.65302762, u'next_clock': 3469508096L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 77.713019564, u'next_clock': 3473828096L, u'oid': 26, u'value': 16804, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 77.923061972, u'next_clock': 3488948096L, u'oid': 17, u'value': 30137, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 77.953069398, u'next_clock': 3491108096L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 78.01304812, u'next_clock': 3495428096L, u'oid': 26, u'value': 16831, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 78.223158064, u'next_clock': 3510548096L, u'oid': 17, u'value': 30136, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 78.253048138, u'next_clock': 3512708096L, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 78.313077953, u'next_clock': 3517028096L, u'oid': 26, u'value': 16870, '#name': u'analog_in_state', '#sent_time': 77.515264564}
mcu 'mcu': got {'#receive_time': 78.523053953, u'next_clock': 3532148096L, u'oid': 17, u'value': 30154, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 78.553060175, u'next_clock': 3534308096L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 78.613098008, u'next_clock': 3538628096L, u'oid': 26, u'value': 16880, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 78.823142601, u'next_clock': 3553748096L, u'oid': 17, u'value': 30146, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 78.853082638, u'next_clock': 3555908096L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 78.913079249, u'next_clock': 3560228096L, u'oid': 26, u'value': 16907, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 79.123131841, u'next_clock': 3575348096L, u'oid': 17, u'value': 30160, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 79.153094175, u'next_clock': 3577508096L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 79.213119101, u'next_clock': 3581828096L, u'oid': 26, u'value': 16971, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 79.4231571, u'next_clock': 3596948096L, u'oid': 17, u'value': 30149, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 79.453085563, u'next_clock': 3599108096L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 78.499479101}
mcu 'mcu': got {'#receive_time': 79.51308386, u'next_clock': 3603428096L, u'oid': 26, u'value': 16999, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 79.723136397, u'next_clock': 3618548096L, u'oid': 17, u'value': 30155, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 79.753117619, u'next_clock': 3620708096L, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 79.813141933, u'next_clock': 3625028096L, u'oid': 26, u'value': 17043, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.023206878, u'next_clock': 3640148096L, u'oid': 17, u'value': 30153, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.053131544, u'next_clock': 3642308096L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.113165674, u'next_clock': 3646628096L, u'oid': 26, u'value': 17077, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.323148229, u'next_clock': 3661748096L, u'oid': 17, u'value': 30169, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.353180952, u'next_clock': 3663908096L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.413140192, u'next_clock': 3668228096L, u'oid': 26, u'value': 17107, '#name': u'analog_in_state', '#sent_time': 79.483582286}
mcu 'mcu': got {'#receive_time': 80.623161877, u'next_clock': 3683348096L, u'oid': 17, u'value': 30182, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 80.653164914, u'next_clock': 3685508096L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 80.713169433, u'next_clock': 3689828096L, u'oid': 26, u'value': 17145, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 80.923221322, u'next_clock': 3704948096L, u'oid': 17, u'value': 30160, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 80.953153488, u'next_clock': 3707108096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 81.013254155, u'next_clock': 3711428096L, u'oid': 26, u'value': 17179, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 81.223168933, u'next_clock': 3726548096L, u'oid': 17, u'value': 30152, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 81.253163433, u'next_clock': 3728708096L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 81.313146636, u'next_clock': 3733028096L, u'oid': 26, u'value': 17199, '#name': u'analog_in_state', '#sent_time': 80.468551748}
mcu 'mcu': got {'#receive_time': 81.523180581, u'next_clock': 3748148096L, u'oid': 17, u'value': 30171, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 81.553324692, u'next_clock': 3750308096L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 81.613221395, u'next_clock': 3754628096L, u'oid': 26, u'value': 17229, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 81.823298432, u'next_clock': 3769748096L, u'oid': 17, u'value': 30182, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 81.853190969, u'next_clock': 3771908096L, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 81.913203914, u'next_clock': 3776228096L, u'oid': 26, u'value': 17265, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 82.123278654, u'next_clock': 3791348096L, u'oid': 17, u'value': 30184, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 82.153264321, u'next_clock': 3793508096L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 82.213295062, u'next_clock': 3797828096L, u'oid': 26, u'value': 17310, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 82.423227413, u'next_clock': 3812948096L, u'oid': 17, u'value': 30158, '#name': u'analog_in_state', '#sent_time': 81.453522766}
mcu 'mcu': got {'#receive_time': 82.453211487, u'next_clock': 3815108096L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 82.513213321, u'next_clock': 3819428096L, u'oid': 26, u'value': 17379, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 82.723223913, u'next_clock': 3834548096L, u'oid': 17, u'value': 30161, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 82.75323908, u'next_clock': 3836708096L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 82.813283321, u'next_clock': 3841028096L, u'oid': 26, u'value': 17385, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.023304765, u'next_clock': 3856148096L, u'oid': 17, u'value': 30169, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.053271932, u'next_clock': 3858308096L, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.113275672, u'next_clock': 3862628096L, u'oid': 26, u'value': 17418, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.32325758, u'next_clock': 3877748096L, u'oid': 17, u'value': 30161, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.353324931, u'next_clock': 3879908096L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.413299005, u'next_clock': 3884228096L, u'oid': 26, u'value': 17432, '#name': u'analog_in_state', '#sent_time': 82.438595802}
mcu 'mcu': got {'#receive_time': 83.623249487, u'next_clock': 3899348096L, u'oid': 17, u'value': 30187, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 83.65327595, u'next_clock': 3901508096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 83.713273135, u'next_clock': 3905828096L, u'oid': 26, u'value': 17461, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 83.923273616, u'next_clock': 3920948096L, u'oid': 17, u'value': 30164, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 83.953365079, u'next_clock': 3923108096L, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 84.013364561, u'next_clock': 3927428096L, u'oid': 26, u'value': 17503, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 84.223284542, u'next_clock': 3942548096L, u'oid': 17, u'value': 30176, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 84.253306653, u'next_clock': 3944708096L, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 84.313300875, u'next_clock': 3949028096L, u'oid': 26, u'value': 17524, '#name': u'analog_in_state', '#sent_time': 83.423424968}
mcu 'mcu': got {'#receive_time': 84.52332182, u'next_clock': 3964148096L, u'oid': 17, u'value': 30187, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 84.553294431, u'next_clock': 3966308096L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 84.613340505, u'next_clock': 3970628096L, u'oid': 26, u'value': 17563, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 84.823323949, u'next_clock': 3985748096L, u'oid': 17, u'value': 30191, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 84.853319393, u'next_clock': 3987908096L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 84.913339356, u'next_clock': 3992228096L, u'oid': 26, u'value': 17584, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 85.123320134, u'next_clock': 4007348096L, u'oid': 17, u'value': 30168, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 85.153303597, u'next_clock': 4009508096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 85.213391041, u'next_clock': 4013828096L, u'oid': 26, u'value': 17635, '#name': u'analog_in_state', '#sent_time': 84.408272338}
mcu 'mcu': got {'#receive_time': 85.423425041, u'next_clock': 4028948096L, u'oid': 17, u'value': 30185, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 85.45343143, u'next_clock': 4031108096L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 85.5134158, u'next_clock': 4035428096L, u'oid': 26, u'value': 17664, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 85.723426856, u'next_clock': 4050548096L, u'oid': 17, u'value': 30187, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 85.75342293, u'next_clock': 4052708096L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 85.813473837, u'next_clock': 4057028096L, u'oid': 26, u'value': 17689, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 86.0235508, u'next_clock': 4072148096L, u'oid': 17, u'value': 30187, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 86.053431856, u'next_clock': 4074308096L, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 86.113432911, u'next_clock': 4078628096L, u'oid': 26, u'value': 17718, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 86.323478893, u'next_clock': 4093748096L, u'oid': 17, u'value': 30187, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 86.353469615, u'next_clock': 4095908096L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 85.393096338}
mcu 'mcu': got {'#receive_time': 86.413390226, u'next_clock': 4100228096L, u'oid': 26, u'value': 17748, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 86.623477226, u'next_clock': 4115348096L, u'oid': 17, u'value': 30176, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 86.653482466, u'next_clock': 4117508096L, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 86.713472411, u'next_clock': 4121828096L, u'oid': 26, u'value': 17782, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 86.923593689, u'next_clock': 4136948096L, u'oid': 17, u'value': 30186, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 86.953493355, u'next_clock': 4139108096L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 87.013478559, u'next_clock': 4143428096L, u'oid': 26, u'value': 17807, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 87.223523429, u'next_clock': 4158548096L, u'oid': 17, u'value': 30179, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 87.253513059, u'next_clock': 4160708096L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 87.313519892, u'next_clock': 4165028096L, u'oid': 26, u'value': 17835, '#name': u'analog_in_state', '#sent_time': 86.377233856}
mcu 'mcu': got {'#receive_time': 87.523494929, u'next_clock': 4180148096L, u'oid': 17, u'value': 30186, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 87.553592744, u'next_clock': 4182308096L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 87.613511984, u'next_clock': 4186628096L, u'oid': 26, u'value': 17877, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 87.823570021, u'next_clock': 4201748096L, u'oid': 17, u'value': 30188, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 87.853524873, u'next_clock': 4203908096L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 87.91355354, u'next_clock': 4208228096L, u'oid': 26, u'value': 17896, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 88.123541243, u'next_clock': 4223348096L, u'oid': 17, u'value': 30188, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 88.153533688, u'next_clock': 4225508096L, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 88.213571058, u'next_clock': 4229828096L, u'oid': 26, u'value': 17912, '#name': u'analog_in_state', '#sent_time': 87.36145954}
mcu 'mcu': got {'#receive_time': 88.423520891, u'next_clock': 4244948096L, u'oid': 17, u'value': 30192, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 88.453533484, u'next_clock': 4247108096L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 88.513535632, u'next_clock': 4251428096L, u'oid': 26, u'value': 17957, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 88.723559836, u'next_clock': 4266548096L, u'oid': 17, u'value': 30188, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 88.753563558, u'next_clock': 4268708096L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 88.813616984, u'next_clock': 4273028096L, u'oid': 26, u'value': 18017, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 89.023714669, u'next_clock': 4288148096L, u'oid': 17, u'value': 30189, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 89.053591669, u'next_clock': 4290308096L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 89.113588335, u'next_clock': 4294628096L, u'oid': 26, u'value': 18033, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 89.323626817, u'next_clock': 14780800, u'oid': 17, u'value': 30197, '#name': u'analog_in_state', '#sent_time': 88.345623521}
mcu 'mcu': got {'#receive_time': 89.353664743, u'next_clock': 16940800, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 89.413562446, u'next_clock': 21260800, u'oid': 26, u'value': 18076, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 89.623651705, u'next_clock': 36380800, u'oid': 17, u'value': 30190, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 89.653606372, u'next_clock': 38540800, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 89.71360915, u'next_clock': 42860800, u'oid': 26, u'value': 18104, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 89.923663113, u'next_clock': 57980800, u'oid': 17, u'value': 30189, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 89.95362152, u'next_clock': 60140800, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 90.013671279, u'next_clock': 64460800, u'oid': 26, u'value': 18144, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 90.223647075, u'next_clock': 79580800, u'oid': 17, u'value': 30189, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 90.253637483, u'next_clock': 81740800, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 90.313730594, u'next_clock': 86060800, u'oid': 26, u'value': 18179, '#name': u'analog_in_state', '#sent_time': 89.329884372}
mcu 'mcu': got {'#receive_time': 90.523636853, u'next_clock': 101180800, u'oid': 17, u'value': 30192, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 90.553703538, u'next_clock': 103340800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 90.61366789, u'next_clock': 107660800, u'oid': 26, u'value': 18206, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 90.823806223, u'next_clock': 122780800, u'oid': 17, u'value': 30193, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 90.853697445, u'next_clock': 124940800, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 90.913678168, u'next_clock': 129260800, u'oid': 26, u'value': 18233, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 91.123687519, u'next_clock': 144380800, u'oid': 17, u'value': 30188, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 91.153691556, u'next_clock': 146540800, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 91.213734834, u'next_clock': 150860800, u'oid': 26, u'value': 18263, '#name': u'analog_in_state', '#sent_time': 90.314647186}
mcu 'mcu': got {'#receive_time': 91.423692334, u'next_clock': 165980800, u'oid': 17, u'value': 30182, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 91.453680908, u'next_clock': 168140800, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 91.513664982, u'next_clock': 172460800, u'oid': 26, u'value': 18297, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 91.723701149, u'next_clock': 187580800, u'oid': 17, u'value': 30192, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 91.753721426, u'next_clock': 189740800, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 91.813880797, u'next_clock': 194060800, u'oid': 26, u'value': 18323, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 92.023759445, u'next_clock': 209180800, u'oid': 17, u'value': 30194, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 92.053721056, u'next_clock': 211340800, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 92.113728241, u'next_clock': 215660800, u'oid': 26, u'value': 18362, '#name': u'analog_in_state', '#sent_time': 91.298921834}
mcu 'mcu': got {'#receive_time': 92.323775815, u'next_clock': 230780800, u'oid': 17, u'value': 30193, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.353761889, u'next_clock': 232940800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.413722574, u'next_clock': 237260800, u'oid': 26, u'value': 18382, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.623775259, u'next_clock': 252380800, u'oid': 17, u'value': 30194, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.65376387, u'next_clock': 254540800, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.713770055, u'next_clock': 258860800, u'oid': 26, u'value': 18414, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.923923407, u'next_clock': 273980800, u'oid': 17, u'value': 30190, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 92.95386287, u'next_clock': 276140800, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 93.013824055, u'next_clock': 280460800, u'oid': 26, u'value': 18422, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 93.223827055, u'next_clock': 295580800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 93.253793833, u'next_clock': 297740800, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 92.283152222}
mcu 'mcu': got {'#receive_time': 93.313821796, u'next_clock': 302060800, u'oid': 26, u'value': 18464, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 93.523794777, u'next_clock': 317180800, u'oid': 17, u'value': 30192, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 93.55378374, u'next_clock': 319340800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 93.61387561, u'next_clock': 323660800, u'oid': 26, u'value': 18511, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 93.823894555, u'next_clock': 338780800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 93.853857981, u'next_clock': 340940800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 93.913807536, u'next_clock': 345260800, u'oid': 26, u'value': 18543, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 94.123827036, u'next_clock': 360380800, u'oid': 17, u'value': 30188, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 94.153823018, u'next_clock': 362540800, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 94.213870943, u'next_clock': 366860800, u'oid': 26, u'value': 18583, '#name': u'analog_in_state', '#sent_time': 93.267356296}
mcu 'mcu': got {'#receive_time': 94.423829499, u'next_clock': 381980800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 94.45381311, u'next_clock': 384140800, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 94.513807721, u'next_clock': 388460800, u'oid': 26, u'value': 18611, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 94.723883091, u'next_clock': 403580800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 94.753944702, u'next_clock': 405740800, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 94.814092295, u'next_clock': 410060800, u'oid': 26, u'value': 18672, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 95.023796332, u'next_clock': 425180800, u'oid': 17, u'value': 30194, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 95.053788184, u'next_clock': 427340800, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 95.11378285, u'next_clock': 431660800, u'oid': 26, u'value': 18690, '#name': u'analog_in_state', '#sent_time': 94.251626499}
mcu 'mcu': got {'#receive_time': 95.32381998, u'next_clock': 446780800, u'oid': 17, u'value': 30197, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.353806035, u'next_clock': 448940800, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.413832776, u'next_clock': 453260800, u'oid': 26, u'value': 18712, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.623832924, u'next_clock': 468380800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.653815665, u'next_clock': 470540800, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.713814961, u'next_clock': 474860800, u'oid': 26, u'value': 18735, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.923867554, u'next_clock': 489980800, u'oid': 17, u'value': 30194, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 95.953874239, u'next_clock': 492140800, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 96.013830683, u'next_clock': 496460800, u'oid': 26, u'value': 18772, '#name': u'analog_in_state', '#sent_time': 95.236503739}
mcu 'mcu': got {'#receive_time': 96.223903424, u'next_clock': 511580800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.25392585, u'next_clock': 513740800, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.314011053, u'next_clock': 518060800, u'oid': 26, u'value': 18800, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.523951035, u'next_clock': 533180800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.554020701, u'next_clock': 535340800, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.613958461, u'next_clock': 539660800, u'oid': 26, u'value': 18828, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.823988072, u'next_clock': 554780800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.853967312, u'next_clock': 556940800, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 96.913961275, u'next_clock': 561260800, u'oid': 26, u'value': 18841, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 97.123964145, u'next_clock': 576380800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 97.153968238, u'next_clock': 578540800, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 96.221252553}
mcu 'mcu': got {'#receive_time': 97.213954979, u'next_clock': 582860800, u'oid': 26, u'value': 18887, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 97.423982108, u'next_clock': 597980800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 97.453954386, u'next_clock': 600140800, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 97.514029904, u'next_clock': 604460800, u'oid': 26, u'value': 18913, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 97.724102089, u'next_clock': 619580800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 97.754041923, u'next_clock': 621740800, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 97.814030386, u'next_clock': 626060800, u'oid': 26, u'value': 18937, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 98.024022015, u'next_clock': 641180800, u'oid': 17, u'value': 30195, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 98.054010867, u'next_clock': 643340800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 98.114016867, u'next_clock': 647660800, u'oid': 26, u'value': 18955, '#name': u'analog_in_state', '#sent_time': 97.206442294}
mcu 'mcu': got {'#receive_time': 98.324054237, u'next_clock': 662780800, u'oid': 17, u'value': 30193, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.354084571, u'next_clock': 664940800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.414007478, u'next_clock': 669260800, u'oid': 26, u'value': 18994, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.624049811, u'next_clock': 684380800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.654045589, u'next_clock': 686540800, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.714109533, u'next_clock': 690860800, u'oid': 26, u'value': 19043, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.92407133, u'next_clock': 705980800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 98.9540917, u'next_clock': 708140800, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 99.014065274, u'next_clock': 712460800, u'oid': 26, u'value': 19086, '#name': u'analog_in_state', '#sent_time': 98.1915462}
mcu 'mcu': got {'#receive_time': 99.224083477, u'next_clock': 727580800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.25408294, u'next_clock': 729740800, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.314120774, u'next_clock': 734060800, u'oid': 26, u'value': 19112, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.524093144, u'next_clock': 749180800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.554161996, u'next_clock': 751340800, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.614098662, u'next_clock': 755660800, u'oid': 26, u'value': 19144, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.824206181, u'next_clock': 770780800, u'oid': 17, u'value': 30199, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.854104644, u'next_clock': 772940800, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 99.914095514, u'next_clock': 777260800, u'oid': 26, u'value': 19189, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 100.124139125, u'next_clock': 792380800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 100.154101199, u'next_clock': 794540800, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 99.176626052}
mcu 'mcu': got {'#receive_time': 100.214101792, u'next_clock': 798860800, u'oid': 26, u'value': 19222, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 100.424084032, u'next_clock': 813980800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 100.454056532, u'next_clock': 816140800, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 100.514062847, u'next_clock': 820460800, u'oid': 26, u'value': 19236, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 100.724272458, u'next_clock': 835580800, u'oid': 17, u'value': 30210, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 100.75421981, u'next_clock': 837740800, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 100.814200088, u'next_clock': 842060800, u'oid': 26, u'value': 19265, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 101.024105254, u'next_clock': 857180800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 101.054130662, u'next_clock': 859340800, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 101.114101365, u'next_clock': 863660800, u'oid': 26, u'value': 19296, '#name': u'analog_in_state', '#sent_time': 100.16079581}
mcu 'mcu': got {'#receive_time': 101.324119884, u'next_clock': 878780800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.354148921, u'next_clock': 880940800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.414221198, u'next_clock': 885260800, u'oid': 26, u'value': 19331, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.624143513, u'next_clock': 900380800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.654215958, u'next_clock': 902540800, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.714145346, u'next_clock': 906860800, u'oid': 26, u'value': 19382, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.92415342, u'next_clock': 921980800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 101.954119994, u'next_clock': 924140800, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 102.014155698, u'next_clock': 928460800, u'oid': 26, u'value': 19445, '#name': u'analog_in_state', '#sent_time': 101.145830902}
mcu 'mcu': got {'#receive_time': 102.224154513, u'next_clock': 943580800, u'oid': 17, u'value': 30206, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.254155809, u'next_clock': 945740800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.314166272, u'next_clock': 950060800, u'oid': 26, u'value': 19449, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.524190105, u'next_clock': 965180800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.554178364, u'next_clock': 967340800, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.614278346, u'next_clock': 971660800, u'oid': 26, u'value': 19465, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.824261123, u'next_clock': 986780800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.854235179, u'next_clock': 988940800, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 102.914251179, u'next_clock': 993260800, u'oid': 26, u'value': 19489, '#name': u'analog_in_state', '#sent_time': 102.130765587}
mcu 'mcu': got {'#receive_time': 103.124201031, u'next_clock': 1008380800, u'oid': 17, u'value': 30212, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.154195086, u'next_clock': 1010540800, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.214226512, u'next_clock': 1014860800, u'oid': 26, u'value': 19504, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.42423066, u'next_clock': 1029980800, u'oid': 17, u'value': 30212, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.454230068, u'next_clock': 1032140800, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.514221623, u'next_clock': 1036460800, u'oid': 26, u'value': 19541, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.724238179, u'next_clock': 1051580800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.754228327, u'next_clock': 1053740800, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 103.814249253, u'next_clock': 1058060800, u'oid': 26, u'value': 19568, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 104.024254549, u'next_clock': 1073180800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 104.054251067, u'next_clock': 1075340800, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 103.115750568}
mcu 'mcu': got {'#receive_time': 104.114239826, u'next_clock': 1079660800, u'oid': 26, u'value': 19621, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.324269604, u'next_clock': 1094780800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.354278011, u'next_clock': 1096940800, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.414290937, u'next_clock': 1101260800, u'oid': 26, u'value': 19635, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.6244389, u'next_clock': 1116380800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.654315215, u'next_clock': 1118540800, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.714304382, u'next_clock': 1122860800, u'oid': 26, u'value': 19681, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.924352233, u'next_clock': 1137980800, u'oid': 17, u'value': 30223, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 104.954321196, u'next_clock': 1140140800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 105.014358474, u'next_clock': 1144460800, u'oid': 26, u'value': 19717, '#name': u'analog_in_state', '#sent_time': 104.100771252}
mcu 'mcu': got {'#receive_time': 105.224332363, u'next_clock': 1159580800, u'oid': 17, u'value': 30210, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.254341474, u'next_clock': 1161740800, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.31441227, u'next_clock': 1166060800, u'oid': 26, u'value': 19737, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.524286474, u'next_clock': 1181180800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.554275066, u'next_clock': 1183340800, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.614313177, u'next_clock': 1187660800, u'oid': 26, u'value': 19755, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.824296603, u'next_clock': 1202780800, u'oid': 17, u'value': 30199, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.854293936, u'next_clock': 1204940800, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 105.914289122, u'next_clock': 1209260800, u'oid': 26, u'value': 19781, '#name': u'analog_in_state', '#sent_time': 105.0849129}
mcu 'mcu': got {'#receive_time': 106.124379547, u'next_clock': 1224380800, u'oid': 17, u'value': 30196, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.154431622, u'next_clock': 1226540800, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.214416047, u'next_clock': 1230860800, u'oid': 26, u'value': 19816, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.424365344, u'next_clock': 1245980800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.454352251, u'next_clock': 1248140800, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.514400047, u'next_clock': 1252460800, u'oid': 26, u'value': 19843, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.72447588, u'next_clock': 1267580800, u'oid': 17, u'value': 30197, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.75440214, u'next_clock': 1269740800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 106.814445269, u'next_clock': 1274060800, u'oid': 26, u'value': 19868, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 107.024413843, u'next_clock': 1289180800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 106.069690455}
mcu 'mcu': got {'#receive_time': 107.05439451, u'next_clock': 1291340800, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.114426436, u'next_clock': 1295660800, u'oid': 26, u'value': 19891, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.324489676, u'next_clock': 1310780800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.354490028, u'next_clock': 1312940800, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.414438213, u'next_clock': 1317260800, u'oid': 26, u'value': 19935, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.624561843, u'next_clock': 1332380800, u'oid': 17, u'value': 30198, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.654455472, u'next_clock': 1334540800, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.714473176, u'next_clock': 1338860800, u'oid': 26, u'value': 19943, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.924470528, u'next_clock': 1353980800, u'oid': 17, u'value': 30224, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 107.954459528, u'next_clock': 1356140800, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 108.014464028, u'next_clock': 1360460800, u'oid': 26, u'value': 19959, '#name': u'analog_in_state', '#sent_time': 107.053994621}
mcu 'mcu': got {'#receive_time': 108.224511731, u'next_clock': 1375580800, u'oid': 17, u'value': 30228, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.25449525, u'next_clock': 1377740800, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.319864583, u'next_clock': 1382060800, u'oid': 26, u'value': 19972, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.524544361, u'next_clock': 1397180800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.554583639, u'next_clock': 1399340800, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.614584639, u'next_clock': 1403660800, u'oid': 26, u'value': 20046, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.824549064, u'next_clock': 1418780800, u'oid': 17, u'value': 30204, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.854523268, u'next_clock': 1420940800, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 108.914516935, u'next_clock': 1425260800, u'oid': 26, u'value': 20079, '#name': u'analog_in_state', '#sent_time': 108.038265139}
mcu 'mcu': got {'#receive_time': 109.12455312, u'next_clock': 1440380800, u'oid': 17, u'value': 30206, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.154530268, u'next_clock': 1442540800, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.214538416, u'next_clock': 1446860800, u'oid': 26, u'value': 20092, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.42452499, u'next_clock': 1461980800, u'oid': 17, u'value': 30214, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.454498564, u'next_clock': 1464140800, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.514504434, u'next_clock': 1468460800, u'oid': 26, u'value': 20134, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.724660712, u'next_clock': 1483580800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.754552045, u'next_clock': 1485740800, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 109.814642638, u'next_clock': 1490060800, u'oid': 26, u'value': 20179, '#name': u'analog_in_state', '#sent_time': 109.023332638}
mcu 'mcu': got {'#receive_time': 110.024567415, u'next_clock': 1505180800, u'oid': 17, u'value': 30199, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.054573415, u'next_clock': 1507340800, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.114575915, u'next_clock': 1511660800, u'oid': 26, u'value': 20218, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.324643119, u'next_clock': 1526780800, u'oid': 17, u'value': 30214, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.354697082, u'next_clock': 1528940800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.4146401, u'next_clock': 1533260800, u'oid': 26, u'value': 20237, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.62456186, u'next_clock': 1548380800, u'oid': 17, u'value': 30206, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.654525989, u'next_clock': 1550540800, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.714529989, u'next_clock': 1554860800, u'oid': 26, u'value': 20255, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.924542267, u'next_clock': 1569980800, u'oid': 17, u'value': 30208, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 110.954537156, u'next_clock': 1572140800, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 110.007596286}
mcu 'mcu': got {'#receive_time': 111.014540304, u'next_clock': 1576460800, u'oid': 26, u'value': 20279, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.224647285, u'next_clock': 1591580800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.2546846, u'next_clock': 1593740800, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.314682211, u'next_clock': 1598060800, u'oid': 26, u'value': 20299, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.524740989, u'next_clock': 1613180800, u'oid': 17, u'value': 30233, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.554631192, u'next_clock': 1615340800, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.614726878, u'next_clock': 1619660800, u'oid': 26, u'value': 20348, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.824674544, u'next_clock': 1634780800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.854664414, u'next_clock': 1636940800, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 111.91465547, u'next_clock': 1641260800, u'oid': 26, u'value': 20363, '#name': u'analog_in_state', '#sent_time': 110.992632767}
mcu 'mcu': got {'#receive_time': 112.124683322, u'next_clock': 1656380800, u'oid': 17, u'value': 30227, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.154687785, u'next_clock': 1658540800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.214748525, u'next_clock': 1662860800, u'oid': 26, u'value': 20396, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.424685562, u'next_clock': 1677980800, u'oid': 17, u'value': 30234, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.454668729, u'next_clock': 1680140800, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.514808433, u'next_clock': 1684460800, u'oid': 26, u'value': 20406, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.724767673, u'next_clock': 1699580800, u'oid': 17, u'value': 30214, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.754741155, u'next_clock': 1701740800, u'oid': 20, u'value': 14077, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 112.814711858, u'next_clock': 1706060800, u'oid': 26, u'value': 20451, '#name': u'analog_in_state', '#sent_time': 111.977678192}
mcu 'mcu': got {'#receive_time': 113.02469584, u'next_clock': 1721180800, u'oid': 17, u'value': 30258, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.05470621, u'next_clock': 1723340800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.11470271, u'next_clock': 1727660800, u'oid': 26, u'value': 20463, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.324773506, u'next_clock': 1742780800, u'oid': 17, u'value': 30228, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.354737173, u'next_clock': 1744940800, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.41472871, u'next_clock': 1749260800, u'oid': 26, u'value': 20500, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.62477058, u'next_clock': 1764380800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.654761876, u'next_clock': 1766540800, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.714741913, u'next_clock': 1770860800, u'oid': 26, u'value': 20527, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.924804839, u'next_clock': 1785980800, u'oid': 17, u'value': 30230, '#name': u'analog_in_state', '#sent_time': 112.961915654}
mcu 'mcu': got {'#receive_time': 113.954792969, u'next_clock': 1788140800, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.014858524, u'next_clock': 1792460800, u'oid': 26, u'value': 20543, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.224709635, u'next_clock': 1807580800, u'oid': 17, u'value': 30269, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.254690543, u'next_clock': 1809740800, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.314741339, u'next_clock': 1814060800, u'oid': 26, u'value': 20576, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.524754968, u'next_clock': 1829180800, u'oid': 17, u'value': 30200, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.554713116, u'next_clock': 1831340800, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.614709376, u'next_clock': 1835660800, u'oid': 26, u'value': 20599, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.824731339, u'next_clock': 1850780800, u'oid': 17, u'value': 30221, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.854999079, u'next_clock': 1852940800, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 114.914758487, u'next_clock': 1857260800, u'oid': 26, u'value': 20645, '#name': u'analog_in_state', '#sent_time': 113.94634195}
mcu 'mcu': got {'#receive_time': 115.124750264, u'next_clock': 1872380800, u'oid': 17, u'value': 30214, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.15474019, u'next_clock': 1874540800, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.214752153, u'next_clock': 1878860800, u'oid': 26, u'value': 20685, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.424840357, u'next_clock': 1893980800, u'oid': 17, u'value': 30233, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.454837153, u'next_clock': 1896140800, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.514840894, u'next_clock': 1900460800, u'oid': 26, u'value': 20722, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.724893949, u'next_clock': 1915580800, u'oid': 17, u'value': 30281, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.754851819, u'next_clock': 1917740800, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 115.814892949, u'next_clock': 1922060800, u'oid': 26, u'value': 20735, '#name': u'analog_in_state', '#sent_time': 114.931181635}
mcu 'mcu': got {'#receive_time': 116.024865856, u'next_clock': 1937180800, u'oid': 17, u'value': 30233, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.054873079, u'next_clock': 1939340800, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.114873634, u'next_clock': 1943660800, u'oid': 26, u'value': 20759, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.325045634, u'next_clock': 1958780800, u'oid': 17, u'value': 30250, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.354897838, u'next_clock': 1960940800, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.414938282, u'next_clock': 1965260800, u'oid': 26, u'value': 20776, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.624967819, u'next_clock': 1980380800, u'oid': 17, u'value': 30329, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.654931263, u'next_clock': 1982540800, u'oid': 20, u'value': 14079, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.714901115, u'next_clock': 1986860800, u'oid': 26, u'value': 20814, '#name': u'analog_in_state', '#sent_time': 115.916173671}
mcu 'mcu': got {'#receive_time': 116.924901522, u'next_clock': 2001980800, u'oid': 17, u'value': 30214, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 116.954903004, u'next_clock': 2004140800, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.014985448, u'next_clock': 2008460800, u'oid': 26, u'value': 20830, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.224930411, u'next_clock': 2023580800, u'oid': 17, u'value': 30266, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.254924856, u'next_clock': 2025740800, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.314992059, u'next_clock': 2030060800, u'oid': 26, u'value': 20864, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.525015207, u'next_clock': 2045180800, u'oid': 17, u'value': 30247, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.554927115, u'next_clock': 2047340800, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.615024578, u'next_clock': 2051660800, u'oid': 26, u'value': 20882, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.824936726, u'next_clock': 2066780800, u'oid': 17, u'value': 30235, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.854970003, u'next_clock': 2068940800, u'oid': 20, u'value': 14081, '#name': u'analog_in_state', '#sent_time': 116.900434967}
mcu 'mcu': got {'#receive_time': 117.914950837, u'next_clock': 2073260800, u'oid': 26, u'value': 20902, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.124978725, u'next_clock': 2088380800, u'oid': 17, u'value': 30236, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.154961448, u'next_clock': 2090540800, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.215017966, u'next_clock': 2094860800, u'oid': 26, u'value': 20935, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.42506741, u'next_clock': 2109980800, u'oid': 17, u'value': 30249, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.454959244, u'next_clock': 2112140800, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.514975614, u'next_clock': 2116460800, u'oid': 26, u'value': 20962, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.725037633, u'next_clock': 2131580800, u'oid': 17, u'value': 30270, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.754997447, u'next_clock': 2133740800, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 118.815030836, u'next_clock': 2138060800, u'oid': 26, u'value': 20974, '#name': u'analog_in_state', '#sent_time': 117.884660318}
mcu 'mcu': got {'#receive_time': 119.025017503, u'next_clock': 2153180800L, u'oid': 17, u'value': 30288, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.055005503, u'next_clock': 2155340800L, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.115015743, u'next_clock': 2159660800L, u'oid': 26, u'value': 20982, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.32510104, u'next_clock': 2174780800L, u'oid': 17, u'value': 30361, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.355091465, u'next_clock': 2176940800L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.415143484, u'next_clock': 2181260800L, u'oid': 26, u'value': 20995, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.625056225, u'next_clock': 2196380800L, u'oid': 17, u'value': 30249, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.655079965, u'next_clock': 2198540800L, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.715066391, u'next_clock': 2202860800L, u'oid': 26, u'value': 21032, '#name': u'analog_in_state', '#sent_time': 118.868964892}
mcu 'mcu': got {'#receive_time': 119.925052039, u'next_clock': 2217980800L, u'oid': 17, u'value': 30337, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 119.955140928, u'next_clock': 2220140800L, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.015139521, u'next_clock': 2224460800L, u'oid': 26, u'value': 21082, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.225044039, u'next_clock': 2239580800L, u'oid': 17, u'value': 30238, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.255045354, u'next_clock': 2241740800L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.315452169, u'next_clock': 2246060800L, u'oid': 26, u'value': 21125, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.525097928, u'next_clock': 2261180800L, u'oid': 17, u'value': 30312, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.555044835, u'next_clock': 2263340800L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.615077705, u'next_clock': 2267660800L, u'oid': 26, u'value': 21164, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.825126298, u'next_clock': 2282780800L, u'oid': 17, u'value': 30288, '#name': u'analog_in_state', '#sent_time': 119.853198428}
mcu 'mcu': got {'#receive_time': 120.855068705, u'next_clock': 2284940800L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 120.915083928, u'next_clock': 2289260800L, u'oid': 26, u'value': 21197, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.125080983, u'next_clock': 2304380800L, u'oid': 17, u'value': 30296, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.155072113, u'next_clock': 2306540800L, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.215091927, u'next_clock': 2310860800L, u'oid': 26, u'value': 21220, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.425117316, u'next_clock': 2325980800L, u'oid': 17, u'value': 30227, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.455079335, u'next_clock': 2328140800L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.515121112, u'next_clock': 2332460800L, u'oid': 26, u'value': 21253, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.725107205, u'next_clock': 2347580800L, u'oid': 17, u'value': 30331, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.755094779, u'next_clock': 2349740800L, u'oid': 20, u'value': 14083, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 121.815117186, u'next_clock': 2354060800L, u'oid': 26, u'value': 21278, '#name': u'analog_in_state', '#sent_time': 120.838172909}
mcu 'mcu': got {'#receive_time': 122.025137779, u'next_clock': 2369180800L, u'oid': 17, u'value': 30304, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.055120797, u'next_clock': 2371340800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.115147408, u'next_clock': 2375660800L, u'oid': 26, u'value': 21288, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.325246408, u'next_clock': 2390780800L, u'oid': 17, u'value': 30233, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.355179556, u'next_clock': 2392940800L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.41518139, u'next_clock': 2397260800L, u'oid': 26, u'value': 21293, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.625256315, u'next_clock': 2412380800L, u'oid': 17, u'value': 30304, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.655169815, u'next_clock': 2414540800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.715149723, u'next_clock': 2418860800L, u'oid': 26, u'value': 21349, '#name': u'analog_in_state', '#sent_time': 121.823113094}
mcu 'mcu': got {'#receive_time': 122.9251645, u'next_clock': 2433980800L, u'oid': 17, u'value': 30281, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 122.9551305, u'next_clock': 2436140800L, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.015183815, u'next_clock': 2440460800L, u'oid': 26, u'value': 21359, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.225181408, u'next_clock': 2455580800L, u'oid': 17, u'value': 30335, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.255178148, u'next_clock': 2457740800L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.315266371, u'next_clock': 2462060800L, u'oid': 26, u'value': 21420, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.52518463, u'next_clock': 2477180800L, u'oid': 17, u'value': 30308, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.555175611, u'next_clock': 2479340800L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.615183944, u'next_clock': 2483660800L, u'oid': 26, u'value': 21487, '#name': u'analog_in_state', '#sent_time': 122.807889556}
mcu 'mcu': got {'#receive_time': 123.825242352, u'next_clock': 2498780800L, u'oid': 17, u'value': 30304, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 123.855246333, u'next_clock': 2500940800L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 123.915253592, u'next_clock': 2505260800L, u'oid': 26, u'value': 21504, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.125327129, u'next_clock': 2520380800L, u'oid': 17, u'value': 30271, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.155259222, u'next_clock': 2522540800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.21528837, u'next_clock': 2526860800L, u'oid': 26, u'value': 21510, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.425253277, u'next_clock': 2541980800L, u'oid': 17, u'value': 30299, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.455203666, u'next_clock': 2544140800L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.515327333, u'next_clock': 2548460800L, u'oid': 26, u'value': 21507, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.72530337, u'next_clock': 2563580800L, u'oid': 17, u'value': 30315, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.755276073, u'next_clock': 2565740800L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 123.792784278}
mcu 'mcu': got {'#receive_time': 124.815294481, u'next_clock': 2570060800L, u'oid': 26, u'value': 21523, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.025282981, u'next_clock': 2585180800L, u'oid': 17, u'value': 30363, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.055282869, u'next_clock': 2587340800L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.115283944, u'next_clock': 2591660800L, u'oid': 26, u'value': 21545, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.325445221, u'next_clock': 2606780800L, u'oid': 17, u'value': 30334, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.355331443, u'next_clock': 2608940800L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.415300184, u'next_clock': 2613260800L, u'oid': 26, u'value': 21565, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.625328925, u'next_clock': 2628380800L, u'oid': 17, u'value': 30370, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.655312573, u'next_clock': 2630540800L, u'oid': 20, u'value': 14082, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.715327184, u'next_clock': 2634860800L, u'oid': 26, u'value': 21586, '#name': u'analog_in_state', '#sent_time': 124.777053055}
mcu 'mcu': got {'#receive_time': 125.925339443, u'next_clock': 2649980800L, u'oid': 17, u'value': 30255, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 125.955345073, u'next_clock': 2652140800L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.015375387, u'next_clock': 2656460800L, u'oid': 26, u'value': 21599, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.225337461, u'next_clock': 2671580800L, u'oid': 17, u'value': 30370, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.255369498, u'next_clock': 2673740800L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.315432443, u'next_clock': 2678060800L, u'oid': 26, u'value': 21628, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.525354424, u'next_clock': 2693180800L, u'oid': 17, u'value': 30407, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.555327757, u'next_clock': 2695340800L, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.615359276, u'next_clock': 2699660800L, u'oid': 26, u'value': 21662, '#name': u'analog_in_state', '#sent_time': 125.761309202}
mcu 'mcu': got {'#receive_time': 126.825376405, u'next_clock': 2714780800L, u'oid': 17, u'value': 30329, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 126.85537622, u'next_clock': 2716940800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 126.915369591, u'next_clock': 2721260800L, u'oid': 26, u'value': 21704, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.125378146, u'next_clock': 2736380800L, u'oid': 17, u'value': 30376, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.155374942, u'next_clock': 2738540800L, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.215402479, u'next_clock': 2742860800L, u'oid': 26, u'value': 21736, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.42612522, u'next_clock': 2757980800L, u'oid': 17, u'value': 30346, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.455365053, u'next_clock': 2760140800L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.515363553, u'next_clock': 2764460800L, u'oid': 26, u'value': 21768, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.725412368, u'next_clock': 2779580800L, u'oid': 17, u'value': 30421, '#name': u'analog_in_state', '#sent_time': 126.745531887}
mcu 'mcu': got {'#receive_time': 127.755402683, u'next_clock': 2781740800L, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 127.815427886, u'next_clock': 2786060800L, u'oid': 26, u'value': 21782, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.025425016, u'next_clock': 2801180800L, u'oid': 17, u'value': 30401, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.055426923, u'next_clock': 2803340800L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.115427164, u'next_clock': 2807660800L, u'oid': 26, u'value': 21805, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.325531756, u'next_clock': 2822780800L, u'oid': 17, u'value': 30391, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.357429534, u'next_clock': 2824940800L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.415432738, u'next_clock': 2829260800L, u'oid': 26, u'value': 21840, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.625466553, u'next_clock': 2844380800L, u'oid': 17, u'value': 30359, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.655493886, u'next_clock': 2846540800L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 127.729914998}
mcu 'mcu': got {'#receive_time': 128.71544559, u'next_clock': 2850860800L, u'oid': 26, u'value': 21856, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 128.925482515, u'next_clock': 2865980800L, u'oid': 17, u'value': 30409, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 128.955465552, u'next_clock': 2868140800L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.015526571, u'next_clock': 2872460800L, u'oid': 26, u'value': 21867, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.225553404, u'next_clock': 2887580800L, u'oid': 17, u'value': 30420, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.255480071, u'next_clock': 2889740800L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.315500737, u'next_clock': 2894060800L, u'oid': 26, u'value': 21896, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.525505626, u'next_clock': 2909180800L, u'oid': 17, u'value': 30393, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.555485404, u'next_clock': 2911340800L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.615509108, u'next_clock': 2915660800L, u'oid': 26, u'value': 21917, '#name': u'analog_in_state', '#sent_time': 128.714160275}
mcu 'mcu': got {'#receive_time': 129.825524756, u'next_clock': 2930780800L, u'oid': 17, u'value': 30435, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 129.855523422, u'next_clock': 2932940800L, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 129.915518626, u'next_clock': 2937260800L, u'oid': 26, u'value': 21950, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.125531941, u'next_clock': 2952380800L, u'oid': 17, u'value': 30357, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.155527348, u'next_clock': 2954540800L, u'oid': 20, u'value': 14081, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.215621422, u'next_clock': 2958860800L, u'oid': 26, u'value': 21987, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.4255007, u'next_clock': 2973980800L, u'oid': 17, u'value': 30399, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.455498459, u'next_clock': 2976140800L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.515483644, u'next_clock': 2980460800L, u'oid': 26, u'value': 21995, '#name': u'analog_in_state', '#sent_time': 129.698840663}
mcu 'mcu': got {'#receive_time': 130.725531848, u'next_clock': 2995580800L, u'oid': 17, u'value': 30374, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 130.755520996, u'next_clock': 2997740800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 130.815512292, u'next_clock': 3002060800L, u'oid': 26, u'value': 22000, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.025525625, u'next_clock': 3017180800L, u'oid': 17, u'value': 30368, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.055517347, u'next_clock': 3019340800L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.115528255, u'next_clock': 3023660800L, u'oid': 26, u'value': 22006, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.325643829, u'next_clock': 3038780800L, u'oid': 17, u'value': 30469, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.355595421, u'next_clock': 3040940800L, u'oid': 20, u'value': 14083, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.415604014, u'next_clock': 3045260800L, u'oid': 26, u'value': 22040, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.62563094, u'next_clock': 3060380800L, u'oid': 17, u'value': 30390, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.655563866, u'next_clock': 3062540800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 130.682978755}
mcu 'mcu': got {'#receive_time': 131.715575403, u'next_clock': 3066860800L, u'oid': 26, u'value': 22065, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 131.925585699, u'next_clock': 3081980800L, u'oid': 17, u'value': 30381, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 131.955596384, u'next_clock': 3084140800L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.015619569, u'next_clock': 3088460800L, u'oid': 26, u'value': 22093, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.225664162, u'next_clock': 3103580800L, u'oid': 17, u'value': 30434, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.25564805, u'next_clock': 3105740800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.315628013, u'next_clock': 3110060800L, u'oid': 26, u'value': 22146, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.525597161, u'next_clock': 3125180800L, u'oid': 17, u'value': 30420, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.555592958, u'next_clock': 3127340800L, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.615588624, u'next_clock': 3131660800L, u'oid': 26, u'value': 22176, '#name': u'analog_in_state', '#sent_time': 131.667181403}
mcu 'mcu': got {'#receive_time': 132.825634402, u'next_clock': 3146780800L, u'oid': 17, u'value': 30422, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 132.855629365, u'next_clock': 3148940800L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 132.915670643, u'next_clock': 3153260800L, u'oid': 26, u'value': 22199, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.125725976, u'next_clock': 3168380800L, u'oid': 17, u'value': 30419, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.155947791, u'next_clock': 3170540800L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.215736605, u'next_clock': 3174860800L, u'oid': 26, u'value': 22249, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.425641568, u'next_clock': 3189980800L, u'oid': 17, u'value': 30427, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.455649198, u'next_clock': 3192140800L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.515637976, u'next_clock': 3196460800L, u'oid': 26, u'value': 22281, '#name': u'analog_in_state', '#sent_time': 132.651999309}
mcu 'mcu': got {'#receive_time': 133.725688012, u'next_clock': 3211580800L, u'oid': 17, u'value': 30432, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 133.755677864, u'next_clock': 3213740800L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 133.815659049, u'next_clock': 3218060800L, u'oid': 26, u'value': 22287, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.025708253, u'next_clock': 3233180800L, u'oid': 17, u'value': 30421, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.055666327, u'next_clock': 3235340800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.115661309, u'next_clock': 3239660800L, u'oid': 26, u'value': 22315, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.325766142, u'next_clock': 3254780800L, u'oid': 17, u'value': 30425, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.355702771, u'next_clock': 3256940800L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.415677938, u'next_clock': 3261260800L, u'oid': 26, u'value': 22323, '#name': u'analog_in_state', '#sent_time': 133.636285457}
mcu 'mcu': got {'#receive_time': 134.625703882, u'next_clock': 3276380800L, u'oid': 17, u'value': 30424, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 134.655745845, u'next_clock': 3278540800L, u'oid': 20, u'value': 14085, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 134.71585179, u'next_clock': 3282860800L, u'oid': 26, u'value': 22339, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 134.925773641, u'next_clock': 3297980800L, u'oid': 17, u'value': 30444, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 134.955771827, u'next_clock': 3300140800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.015770475, u'next_clock': 3304460800L, u'oid': 26, u'value': 22372, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.225753123, u'next_clock': 3319580800L, u'oid': 17, u'value': 30407, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.259867086, u'next_clock': 3321740800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.315733474, u'next_clock': 3326060800L, u'oid': 26, u'value': 22390, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.525745863, u'next_clock': 3341180800L, u'oid': 17, u'value': 30421, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.555726697, u'next_clock': 3343340800L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 134.621187067}
mcu 'mcu': got {'#receive_time': 135.615726641, u'next_clock': 3347660800L, u'oid': 26, u'value': 22428, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 135.825811178, u'next_clock': 3362780800L, u'oid': 17, u'value': 30424, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 135.855869863, u'next_clock': 3364940800L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 135.915824493, u'next_clock': 3369260800L, u'oid': 26, u'value': 22438, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.125951493, u'next_clock': 3384380800L, u'oid': 17, u'value': 30388, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.155824844, u'next_clock': 3386540800L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.215830604, u'next_clock': 3390860800L, u'oid': 26, u'value': 22458, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.425807566, u'next_clock': 3405980800L, u'oid': 17, u'value': 30443, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.455791492, u'next_clock': 3408140800L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.515852474, u'next_clock': 3412460800L, u'oid': 26, u'value': 22496, '#name': u'analog_in_state', '#sent_time': 135.605144474}
mcu 'mcu': got {'#receive_time': 136.725880733, u'next_clock': 3427580800L, u'oid': 17, u'value': 30426, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 136.755854381, u'next_clock': 3429740800L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 136.815875974, u'next_clock': 3434060800L, u'oid': 26, u'value': 22508, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.025879677, u'next_clock': 3449180800L, u'oid': 17, u'value': 30470, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.055904066, u'next_clock': 3451340800L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.115937251, u'next_clock': 3455660800L, u'oid': 26, u'value': 22518, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.325899714, u'next_clock': 3470780800L, u'oid': 17, u'value': 30466, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.355952103, u'next_clock': 3472940800L, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.415959066, u'next_clock': 3477260800L, u'oid': 26, u'value': 22524, '#name': u'analog_in_state', '#sent_time': 136.590262103}
mcu 'mcu': got {'#receive_time': 137.625895547, u'next_clock': 3492380800L, u'oid': 17, u'value': 30437, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 137.65594064, u'next_clock': 3494540800L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 137.715911047, u'next_clock': 3498860800L, u'oid': 26, u'value': 22536, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 137.925924343, u'next_clock': 3513980800L, u'oid': 17, u'value': 30447, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 137.955910862, u'next_clock': 3516140800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.015959584, u'next_clock': 3520460800L, u'oid': 26, u'value': 22587, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.226004362, u'next_clock': 3535580800L, u'oid': 17, u'value': 30455, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.255962232, u'next_clock': 3537740800L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.315929325, u'next_clock': 3542060800L, u'oid': 26, u'value': 22637, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.525939584, u'next_clock': 3557180800L, u'oid': 17, u'value': 30459, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.555915824, u'next_clock': 3559340800L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 137.575517418}
mcu 'mcu': got {'#receive_time': 138.615935473, u'next_clock': 3563660800L, u'oid': 26, u'value': 22658, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 138.825966084, u'next_clock': 3578780800L, u'oid': 17, u'value': 30465, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 138.855959621, u'next_clock': 3580940800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 138.915962435, u'next_clock': 3585260800L, u'oid': 26, u'value': 22671, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.126040472, u'next_clock': 3600380800L, u'oid': 17, u'value': 30446, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.155972268, u'next_clock': 3602540800L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.216047509, u'next_clock': 3606860800L, u'oid': 26, u'value': 22708, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.425957324, u'next_clock': 3621980800L, u'oid': 17, u'value': 30462, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.455970213, u'next_clock': 3624140800L, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.515958065, u'next_clock': 3628460800L, u'oid': 26, u'value': 22762, '#name': u'analog_in_state', '#sent_time': 138.55982851}
mcu 'mcu': got {'#receive_time': 139.725970009, u'next_clock': 3643580800L, u'oid': 17, u'value': 30423, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 139.755974157, u'next_clock': 3645740800L, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 139.815964805, u'next_clock': 3650060800L, u'oid': 26, u'value': 22775, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.02597162, u'next_clock': 3665180800L, u'oid': 17, u'value': 30473, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.056013712, u'next_clock': 3667340800L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.116007768, u'next_clock': 3671660800L, u'oid': 26, u'value': 22789, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.325993638, u'next_clock': 3686780800L, u'oid': 17, u'value': 30465, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.356015064, u'next_clock': 3688940800L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.415987286, u'next_clock': 3693260800L, u'oid': 26, u'value': 22810, '#name': u'analog_in_state', '#sent_time': 139.544204842}
mcu 'mcu': got {'#receive_time': 140.626003138, u'next_clock': 3708380800L, u'oid': 17, u'value': 30426, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 140.656001971, u'next_clock': 3710540800L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 140.716018786, u'next_clock': 3714860800L, u'oid': 26, u'value': 22825, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 140.926018527, u'next_clock': 3729980800L, u'oid': 17, u'value': 30466, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 140.956011953, u'next_clock': 3732140800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 141.016000804, u'next_clock': 3736460800L, u'oid': 26, u'value': 22837, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 141.226070804, u'next_clock': 3751580800L, u'oid': 17, u'value': 30449, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 141.256031823, u'next_clock': 3753740800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 141.316047415, u'next_clock': 3758060800L, u'oid': 26, u'value': 22866, '#name': u'analog_in_state', '#sent_time': 140.529335416}
mcu 'mcu': got {'#receive_time': 141.526045693, u'next_clock': 3773180800L, u'oid': 17, u'value': 30453, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 141.556043026, u'next_clock': 3775340800L, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 141.61604386, u'next_clock': 3779660800L, u'oid': 26, u'value': 22887, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 141.826179378, u'next_clock': 3794780800L, u'oid': 17, u'value': 30474, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 141.856057174, u'next_clock': 3796940800L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 141.916143971, u'next_clock': 3801260800L, u'oid': 26, u'value': 22897, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 142.126176637, u'next_clock': 3816380800L, u'oid': 17, u'value': 30454, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 142.156101804, u'next_clock': 3818540800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 142.216115304, u'next_clock': 3822860800L, u'oid': 26, u'value': 22922, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 142.426092211, u'next_clock': 3837980800L, u'oid': 17, u'value': 30474, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 142.456061581, u'next_clock': 3840140800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 141.514221323}
mcu 'mcu': got {'#receive_time': 142.516090915, u'next_clock': 3844460800L, u'oid': 26, u'value': 22949, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 142.726088877, u'next_clock': 3859580800L, u'oid': 17, u'value': 30466, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 142.756065322, u'next_clock': 3861740800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 142.816075896, u'next_clock': 3866060800L, u'oid': 26, u'value': 22962, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.026215266, u'next_clock': 3881180800L, u'oid': 17, u'value': 30473, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.056149877, u'next_clock': 3883340800L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.116151377, u'next_clock': 3887660800L, u'oid': 26, u'value': 22989, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.326188266, u'next_clock': 3902780800L, u'oid': 17, u'value': 30460, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.356560099, u'next_clock': 3904940800L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.416191322, u'next_clock': 3909260800L, u'oid': 26, u'value': 23012, '#name': u'analog_in_state', '#sent_time': 142.499136267}
mcu 'mcu': got {'#receive_time': 143.62619771, u'next_clock': 3924380800L, u'oid': 17, u'value': 30467, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 143.656208821, u'next_clock': 3926540800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 143.716235358, u'next_clock': 3930860800L, u'oid': 26, u'value': 23022, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 143.92625908, u'next_clock': 3945980800L, u'oid': 17, u'value': 30458, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 143.956218043, u'next_clock': 3948140800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 144.016280969, u'next_clock': 3952460800L, u'oid': 26, u'value': 23028, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 144.226251858, u'next_clock': 3967580800L, u'oid': 17, u'value': 30474, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 144.25624671, u'next_clock': 3969740800L, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 144.316236951, u'next_clock': 3974060800L, u'oid': 26, u'value': 23032, '#name': u'analog_in_state', '#sent_time': 143.483382933}
mcu 'mcu': got {'#receive_time': 144.526150747, u'next_clock': 3989180800L, u'oid': 17, u'value': 30459, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 144.556163525, u'next_clock': 3991340800L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 144.616159487, u'next_clock': 3995660800L, u'oid': 26, u'value': 23032, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 144.826194858, u'next_clock': 4010780800L, u'oid': 17, u'value': 30474, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 144.856178673, u'next_clock': 4012940800L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 144.916180506, u'next_clock': 4017260800L, u'oid': 26, u'value': 23032, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 145.126222395, u'next_clock': 4032380800L, u'oid': 17, u'value': 30479, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 145.15627908, u'next_clock': 4034540800L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 145.216273228, u'next_clock': 4038860800L, u'oid': 26, u'value': 23113, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 145.426286672, u'next_clock': 4053980800L, u'oid': 17, u'value': 30459, '#name': u'analog_in_state', '#sent_time': 144.46761958}
mcu 'mcu': got {'#receive_time': 145.456233302, u'next_clock': 4056140800L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 145.516323654, u'next_clock': 4060460800L, u'oid': 26, u'value': 23170, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 145.726338672, u'next_clock': 4075580800L, u'oid': 17, u'value': 30472, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 145.756298283, u'next_clock': 4077740800L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 145.816323079, u'next_clock': 4082060800L, u'oid': 26, u'value': 23218, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.026384338, u'next_clock': 4097180800L, u'oid': 17, u'value': 30476, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.056311838, u'next_clock': 4099340800L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.116323468, u'next_clock': 4103660800L, u'oid': 26, u'value': 23224, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.326368857, u'next_clock': 4118780800L, u'oid': 17, u'value': 30482, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.356364172, u'next_clock': 4120940800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.416402875, u'next_clock': 4125260800L, u'oid': 26, u'value': 23259, '#name': u'analog_in_state', '#sent_time': 145.452496413}
mcu 'mcu': got {'#receive_time': 146.626358708, u'next_clock': 4140380800L, u'oid': 17, u'value': 30471, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 146.656389246, u'next_clock': 4142540800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 146.716380357, u'next_clock': 4146860800L, u'oid': 26, u'value': 23294, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 146.926375542, u'next_clock': 4161980800L, u'oid': 17, u'value': 30475, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 146.956393282, u'next_clock': 4164140800L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 147.016372412, u'next_clock': 4168460800L, u'oid': 26, u'value': 23310, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 147.226380486, u'next_clock': 4183580800L, u'oid': 17, u'value': 30462, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 147.256380893, u'next_clock': 4185740800L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 147.316390541, u'next_clock': 4190060800L, u'oid': 26, u'value': 23326, '#name': u'analog_in_state', '#sent_time': 146.436805597}
mcu 'mcu': got {'#receive_time': 147.526303449, u'next_clock': 4205180800L, u'oid': 17, u'value': 30468, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 147.55631243, u'next_clock': 4207340800L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 147.616307467, u'next_clock': 4211660800L, u'oid': 26, u'value': 23340, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 147.82633406, u'next_clock': 4226780800L, u'oid': 17, u'value': 30482, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 147.856333523, u'next_clock': 4228940800L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 147.916322152, u'next_clock': 4233260800L, u'oid': 26, u'value': 23346, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 148.126379652, u'next_clock': 4248380800L, u'oid': 17, u'value': 30479, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 148.156417911, u'next_clock': 4250540800L, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 148.216417763, u'next_clock': 4254860800L, u'oid': 26, u'value': 23359, '#name': u'analog_in_state', '#sent_time': 147.421217319}
mcu 'mcu': got {'#receive_time': 148.426397041, u'next_clock': 4269980800L, u'oid': 17, u'value': 30479, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 148.45638443, u'next_clock': 4272140800L, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 148.516419559, u'next_clock': 4276460800L, u'oid': 26, u'value': 23385, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 148.726475411, u'next_clock': 4291580800L, u'oid': 17, u'value': 30477, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 148.756454004, u'next_clock': 4293740800L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 148.816466041, u'next_clock': 3093504, u'oid': 26, u'value': 23427, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 149.026511466, u'next_clock': 18213504, u'oid': 17, u'value': 30489, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 149.056450596, u'next_clock': 20373504, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 149.116457651, u'next_clock': 24693504, u'oid': 26, u'value': 23518, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 149.326490244, u'next_clock': 39813504, u'oid': 17, u'value': 30477, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 149.356500688, u'next_clock': 41973504, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 148.406153041}
mcu 'mcu': got {'#receive_time': 149.416469392, u'next_clock': 46293504, u'oid': 26, u'value': 23529, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 149.626478892, u'next_clock': 61413504, u'oid': 17, u'value': 30480, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 149.656475096, u'next_clock': 63573504, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 149.716475984, u'next_clock': 67893504, u'oid': 26, u'value': 23552, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 149.926559262, u'next_clock': 83013504, u'oid': 17, u'value': 30474, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 149.956603947, u'next_clock': 85173504, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 150.016488984, u'next_clock': 89493504, u'oid': 26, u'value': 23554, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 150.226444429, u'next_clock': 104613504, u'oid': 17, u'value': 30475, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 150.256428558, u'next_clock': 106773504, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 150.316436169, u'next_clock': 111093504, u'oid': 26, u'value': 23558, '#name': u'analog_in_state', '#sent_time': 149.390550725}
mcu 'mcu': got {'#receive_time': 150.526482762, u'next_clock': 126213504, u'oid': 17, u'value': 30483, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 150.556452854, u'next_clock': 128373504, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 150.61643991, u'next_clock': 132693504, u'oid': 26, u'value': 23560, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 150.826558873, u'next_clock': 147813504, u'oid': 17, u'value': 30474, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 150.856543595, u'next_clock': 149973504, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 150.916542669, u'next_clock': 154293504, u'oid': 26, u'value': 23571, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 151.12656128, u'next_clock': 169413504, u'oid': 17, u'value': 30471, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 151.156551132, u'next_clock': 171573504, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 151.216553798, u'next_clock': 175893504, u'oid': 26, u'value': 23588, '#name': u'analog_in_state', '#sent_time': 150.374702391}
mcu 'mcu': got {'#receive_time': 151.426548539, u'next_clock': 191013504, u'oid': 17, u'value': 30484, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 151.456508372, u'next_clock': 193173504, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 151.516553224, u'next_clock': 197493504, u'oid': 26, u'value': 23602, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 151.726638057, u'next_clock': 212613504, u'oid': 17, u'value': 30480, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 151.75660065, u'next_clock': 214773504, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 151.816645446, u'next_clock': 219093504, u'oid': 26, u'value': 23612, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 152.02671202, u'next_clock': 234213504, u'oid': 17, u'value': 30484, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 152.056645557, u'next_clock': 236373504, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 152.116593298, u'next_clock': 240693504, u'oid': 26, u'value': 23655, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 152.326639131, u'next_clock': 255813504, u'oid': 17, u'value': 30490, '#name': u'analog_in_state', '#sent_time': 151.35968015}
mcu 'mcu': got {'#receive_time': 152.35665639, u'next_clock': 257973504, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 152.416735372, u'next_clock': 262293504, u'oid': 26, u'value': 23670, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 152.626574575, u'next_clock': 277413504, u'oid': 17, u'value': 30489, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 152.656552316, u'next_clock': 279573504, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 152.71654702, u'next_clock': 283893504, u'oid': 26, u'value': 23684, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 152.92662876, u'next_clock': 299013504, u'oid': 17, u'value': 30495, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 152.956563927, u'next_clock': 301173504, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 153.016552594, u'next_clock': 305493504, u'oid': 26, u'value': 23694, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 153.226565519, u'next_clock': 320613504, u'oid': 17, u'value': 30473, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 153.25656639, u'next_clock': 322773504, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 153.317919945, u'next_clock': 327093504, u'oid': 26, u'value': 23743, '#name': u'analog_in_state', '#sent_time': 152.344237446}
mcu 'mcu': got {'#receive_time': 153.526608667, u'next_clock': 342213504, u'oid': 17, u'value': 30487, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 153.556584149, u'next_clock': 344373504, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 153.616581519, u'next_clock': 348693504, u'oid': 26, u'value': 23768, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 153.826606112, u'next_clock': 363813504, u'oid': 17, u'value': 30500, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 153.856684926, u'next_clock': 365973504, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 153.916640926, u'next_clock': 370293504, u'oid': 26, u'value': 23791, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 154.126694611, u'next_clock': 385413504, u'oid': 17, u'value': 30480, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 154.156682093, u'next_clock': 387573504, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 154.216695278, u'next_clock': 391893504, u'oid': 26, u'value': 23810, '#name': u'analog_in_state', '#sent_time': 153.328256445}
mcu 'mcu': got {'#receive_time': 154.426728611, u'next_clock': 407013504, u'oid': 17, u'value': 30486, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 154.456701556, u'next_clock': 409173504, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 154.516676963, u'next_clock': 413493504, u'oid': 26, u'value': 23829, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 154.726759315, u'next_clock': 428613504, u'oid': 17, u'value': 30487, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 154.756732315, u'next_clock': 430773504, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 154.816855055, u'next_clock': 435093504, u'oid': 26, u'value': 23836, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 155.026762981, u'next_clock': 450213504, u'oid': 17, u'value': 30488, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 155.056746389, u'next_clock': 452373504, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 155.116759833, u'next_clock': 456693504, u'oid': 26, u'value': 23852, '#name': u'analog_in_state', '#sent_time': 154.313245463}
mcu 'mcu': got {'#receive_time': 155.326749833, u'next_clock': 471813504, u'oid': 17, u'value': 30472, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.356794926, u'next_clock': 473973504, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.416761277, u'next_clock': 478293504, u'oid': 26, u'value': 23870, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.626795573, u'next_clock': 493413504, u'oid': 17, u'value': 30484, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.656776425, u'next_clock': 495573504, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.716813185, u'next_clock': 499893504, u'oid': 26, u'value': 23899, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.926931907, u'next_clock': 515013504, u'oid': 17, u'value': 30499, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 155.956796203, u'next_clock': 517173504, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 156.016792629, u'next_clock': 521493504, u'oid': 26, u'value': 23908, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 156.22681111, u'next_clock': 536613504, u'oid': 17, u'value': 30482, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 156.256794851, u'next_clock': 538773504, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 155.297525111}
mcu 'mcu': got {'#receive_time': 156.31680361, u'next_clock': 543093504, u'oid': 26, u'value': 23916, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 156.526801703, u'next_clock': 558213504, u'oid': 17, u'value': 30493, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 156.55682348, u'next_clock': 560373504, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 156.616821258, u'next_clock': 564693504, u'oid': 26, u'value': 23938, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 156.826912795, u'next_clock': 579813504, u'oid': 17, u'value': 30493, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 156.856846795, u'next_clock': 581973504, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 156.916815573, u'next_clock': 586293504, u'oid': 26, u'value': 23958, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 157.126854758, u'next_clock': 601413504, u'oid': 17, u'value': 30485, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 157.15682211, u'next_clock': 603573504, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 157.216962665, u'next_clock': 607893504, u'oid': 26, u'value': 23991, '#name': u'analog_in_state', '#sent_time': 156.281796573}
mcu 'mcu': got {'#receive_time': 157.426893165, u'next_clock': 623013504, u'oid': 17, u'value': 30494, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 157.456997146, u'next_clock': 625173504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 157.516798591, u'next_clock': 629493504, u'oid': 26, u'value': 24007, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 157.726902239, u'next_clock': 644613504, u'oid': 17, u'value': 30497, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 157.756849739, u'next_clock': 646773504, u'oid': 20, u'value': 14124, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 157.817007591, u'next_clock': 651093504, u'oid': 26, u'value': 24028, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 158.026891017, u'next_clock': 666213504, u'oid': 17, u'value': 30490, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 158.056893665, u'next_clock': 668373504, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 158.116890628, u'next_clock': 672693504, u'oid': 26, u'value': 24038, '#name': u'analog_in_state', '#sent_time': 157.266041573}
mcu 'mcu': got {'#receive_time': 158.32691209, u'next_clock': 687813504, u'oid': 17, u'value': 30494, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.356928053, u'next_clock': 689973504, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.417012201, u'next_clock': 694293504, u'oid': 26, u'value': 24048, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.626878775, u'next_clock': 709413504, u'oid': 17, u'value': 30491, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.656888738, u'next_clock': 711573504, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.716889238, u'next_clock': 715893504, u'oid': 26, u'value': 24049, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.927022646, u'next_clock': 731013504, u'oid': 17, u'value': 30489, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 158.956905609, u'next_clock': 733173504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 159.01689872, u'next_clock': 737493504, u'oid': 26, u'value': 24056, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 159.226899349, u'next_clock': 752613504, u'oid': 17, u'value': 30492, '#name': u'analog_in_state', '#sent_time': 158.25019859}
mcu 'mcu': got {'#receive_time': 159.256916831, u'next_clock': 754773504, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.31691246, u'next_clock': 759093504, u'oid': 26, u'value': 24056, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.526972164, u'next_clock': 774213504, u'oid': 17, u'value': 30498, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.556917016, u'next_clock': 776373504, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.616914312, u'next_clock': 780693504, u'oid': 26, u'value': 24056, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.826965775, u'next_clock': 795813504, u'oid': 17, u'value': 30496, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.85692033, u'next_clock': 797973504, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 159.916936719, u'next_clock': 802293504, u'oid': 26, u'value': 24070, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 160.126971812, u'next_clock': 817413504, u'oid': 17, u'value': 30495, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 160.156945367, u'next_clock': 819573504, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 160.216951071, u'next_clock': 823893504, u'oid': 26, u'value': 24161, '#name': u'analog_in_state', '#sent_time': 159.234262294}
mcu 'mcu': got {'#receive_time': 160.4269562, u'next_clock': 839013504, u'oid': 17, u'value': 30500, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 160.456942589, u'next_clock': 841173504, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 160.516958645, u'next_clock': 845493504, u'oid': 26, u'value': 24181, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 160.727029774, u'next_clock': 860613504, u'oid': 17, u'value': 30513, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 160.756970515, u'next_clock': 862773504, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 160.816968404, u'next_clock': 867093504, u'oid': 26, u'value': 24230, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 161.027106922, u'next_clock': 882213504, u'oid': 17, u'value': 30492, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 161.056991218, u'next_clock': 884373504, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 161.117042292, u'next_clock': 888693504, u'oid': 26, u'value': 24256, '#name': u'analog_in_state', '#sent_time': 160.219168386}
mcu 'mcu': got {'#receive_time': 161.327011644, u'next_clock': 903813504, u'oid': 17, u'value': 30505, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.356970218, u'next_clock': 905973504, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.416988922, u'next_clock': 910293504, u'oid': 26, u'value': 24288, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.627025792, u'next_clock': 925413504, u'oid': 17, u'value': 30495, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.65701657, u'next_clock': 927573504, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.71709707, u'next_clock': 931893504, u'oid': 26, u'value': 24296, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.927003644, u'next_clock': 947013504, u'oid': 17, u'value': 30503, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 161.95699307, u'next_clock': 949173504, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 162.016988496, u'next_clock': 953493504, u'oid': 26, u'value': 24326, '#name': u'analog_in_state', '#sent_time': 161.204287681}
mcu 'mcu': got {'#receive_time': 162.227073588, u'next_clock': 968613504, u'oid': 17, u'value': 30512, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.257079347, u'next_clock': 970773504, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.317084699, u'next_clock': 975093504, u'oid': 26, u'value': 24362, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.527104606, u'next_clock': 990213504, u'oid': 17, u'value': 30494, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.557060829, u'next_clock': 992373504, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.617104477, u'next_clock': 996693504, u'oid': 26, u'value': 24455, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.827196125, u'next_clock': 1011813504, u'oid': 17, u'value': 30502, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.857145828, u'next_clock': 1013973504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 162.917121217, u'next_clock': 1018293504, u'oid': 26, u'value': 24467, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 163.127166106, u'next_clock': 1033413504, u'oid': 17, u'value': 30519, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 163.157128791, u'next_clock': 1035573504, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 162.189199773}
mcu 'mcu': got {'#receive_time': 163.217120291, u'next_clock': 1039893504, u'oid': 26, u'value': 24466, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 163.427143902, u'next_clock': 1055013504, u'oid': 17, u'value': 30507, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 163.457149773, u'next_clock': 1057173504, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 163.517097624, u'next_clock': 1061493504, u'oid': 26, u'value': 24514, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 163.72728455, u'next_clock': 1076613504, u'oid': 17, u'value': 30507, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 163.757152198, u'next_clock': 1078773504, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 163.817174643, u'next_clock': 1083093504, u'oid': 26, u'value': 24557, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 164.027191531, u'next_clock': 1098213504, u'oid': 17, u'value': 30509, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 164.057189976, u'next_clock': 1100373504, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 164.117170568, u'next_clock': 1104693504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 163.173376162}
mcu 'mcu': got {'#receive_time': 164.327194587, u'next_clock': 1119813504, u'oid': 17, u'value': 30507, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.357171587, u'next_clock': 1121973504, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.417208513, u'next_clock': 1126293504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.627225957, u'next_clock': 1141413504, u'oid': 17, u'value': 30515, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.657190105, u'next_clock': 1143573504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.71729592, u'next_clock': 1147893504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.927242327, u'next_clock': 1163013504, u'oid': 17, u'value': 30502, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 164.957209549, u'next_clock': 1165173504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 165.017216549, u'next_clock': 1169493504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 164.157722254}
mcu 'mcu': got {'#receive_time': 165.227224031, u'next_clock': 1184613504, u'oid': 17, u'value': 30517, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.257241308, u'next_clock': 1186773504, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.317245531, u'next_clock': 1191093504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.527229679, u'next_clock': 1206213504, u'oid': 17, u'value': 30509, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.557201586, u'next_clock': 1208373504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.617237105, u'next_clock': 1212693504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.827362882, u'next_clock': 1227813504, u'oid': 17, u'value': 30507, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.857272456, u'next_clock': 1229973504, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 165.917271234, u'next_clock': 1234293504, u'oid': 26, u'value': 24576, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 166.127264197, u'next_clock': 1249413504, u'oid': 17, u'value': 30507, '#name': u'analog_in_state', '#sent_time': 165.142811957}
mcu 'mcu': got {'#receive_time': 166.157273382, u'next_clock': 1251573504, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.217276586, u'next_clock': 1255893504, u'oid': 26, u'value': 24579, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.427295956, u'next_clock': 1271013504, u'oid': 17, u'value': 30517, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.457306123, u'next_clock': 1273173504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.517288937, u'next_clock': 1277493504, u'oid': 26, u'value': 24588, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.727430771, u'next_clock': 1292613504, u'oid': 17, u'value': 30508, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.757299641, u'next_clock': 1294773504, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 166.817308252, u'next_clock': 1299093504, u'oid': 26, u'value': 24604, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 167.027316493, u'next_clock': 1314213504, u'oid': 17, u'value': 30510, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 167.057316344, u'next_clock': 1316373504, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 166.127237289}
mcu 'mcu': got {'#receive_time': 167.117308233, u'next_clock': 1320693504, u'oid': 26, u'value': 24622, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.327358826, u'next_clock': 1335813504, u'oid': 17, u'value': 30503, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.357327252, u'next_clock': 1337973504, u'oid': 20, u'value': 14081, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.417349048, u'next_clock': 1342293504, u'oid': 26, u'value': 24623, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.627402214, u'next_clock': 1357413504, u'oid': 17, u'value': 30510, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.657341974, u'next_clock': 1359573504, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.717386381, u'next_clock': 1363893504, u'oid': 26, u'value': 24635, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.927394492, u'next_clock': 1379013504, u'oid': 17, u'value': 30510, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 167.957353103, u'next_clock': 1381173504, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 168.01735464, u'next_clock': 1385493504, u'oid': 26, u'value': 24656, '#name': u'analog_in_state', '#sent_time': 167.11154427}
mcu 'mcu': got {'#receive_time': 168.227410029, u'next_clock': 1400613504, u'oid': 17, u'value': 30520, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.257515825, u'next_clock': 1402773504, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.317338751, u'next_clock': 1407093504, u'oid': 26, u'value': 24678, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.527361214, u'next_clock': 1422213504, u'oid': 17, u'value': 30519, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.557331881, u'next_clock': 1424373504, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.617419029, u'next_clock': 1428693504, u'oid': 26, u'value': 24703, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.827417066, u'next_clock': 1443813504, u'oid': 17, u'value': 30516, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.857439121, u'next_clock': 1445973504, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 168.917406454, u'next_clock': 1450293504, u'oid': 26, u'value': 24705, '#name': u'analog_in_state', '#sent_time': 168.095840622}
mcu 'mcu': got {'#receive_time': 169.127442899, u'next_clock': 1465413504, u'oid': 17, u'value': 30530, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.157418362, u'next_clock': 1467573504, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.217409399, u'next_clock': 1471893504, u'oid': 26, u'value': 24720, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.427442528, u'next_clock': 1487013504, u'oid': 17, u'value': 30514, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.457445121, u'next_clock': 1489173504, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.517380417, u'next_clock': 1493493504, u'oid': 26, u'value': 24756, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.727575158, u'next_clock': 1508613504, u'oid': 17, u'value': 30517, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.757438639, u'next_clock': 1510773504, u'oid': 20, u'value': 14085, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 169.817458287, u'next_clock': 1515093504, u'oid': 26, u'value': 24777, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 170.027482787, u'next_clock': 1530213504, u'oid': 17, u'value': 30518, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 170.057459195, u'next_clock': 1532373504, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 169.080024769}
mcu 'mcu': got {'#receive_time': 170.117473343, u'next_clock': 1536693504, u'oid': 26, u'value': 24791, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.327485417, u'next_clock': 1551813504, u'oid': 17, u'value': 30509, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.35746562, u'next_clock': 1553973504, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.417497565, u'next_clock': 1558293504, u'oid': 26, u'value': 24826, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.627465509, u'next_clock': 1573413504, u'oid': 17, u'value': 30515, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.65741499, u'next_clock': 1575573504, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.717413916, u'next_clock': 1579893504, u'oid': 26, u'value': 24843, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.927430787, u'next_clock': 1595013504, u'oid': 17, u'value': 30527, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 170.957421083, u'next_clock': 1597173504, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 171.017417268, u'next_clock': 1601493504, u'oid': 26, u'value': 24848, '#name': u'analog_in_state', '#sent_time': 170.064274472}
mcu 'mcu': got {'#receive_time': 171.22752736, u'next_clock': 1616613504, u'oid': 17, u'value': 30530, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.257528601, u'next_clock': 1618773504, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.317588286, u'next_clock': 1623093504, u'oid': 26, u'value': 24867, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.527568434, u'next_clock': 1638213504, u'oid': 17, u'value': 30526, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.557619768, u'next_clock': 1640373504, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.617650008, u'next_clock': 1644693504, u'oid': 26, u'value': 24878, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.827566805, u'next_clock': 1659813504, u'oid': 17, u'value': 30526, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.857969286, u'next_clock': 1661973504, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 171.917482601, u'next_clock': 1666293504, u'oid': 26, u'value': 24893, '#name': u'analog_in_state', '#sent_time': 171.04919199}
mcu 'mcu': got {'#receive_time': 172.127470045, u'next_clock': 1681413504, u'oid': 17, u'value': 30524, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.157477693, u'next_clock': 1683573504, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.217477193, u'next_clock': 1687893504, u'oid': 26, u'value': 24901, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.427514971, u'next_clock': 1703013504, u'oid': 17, u'value': 30519, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.457507563, u'next_clock': 1705173504, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.517499712, u'next_clock': 1709493504, u'oid': 26, u'value': 24925, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.727506211, u'next_clock': 1724613504, u'oid': 17, u'value': 30519, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.757508786, u'next_clock': 1726773504, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 172.8175241, u'next_clock': 1731093504, u'oid': 26, u'value': 24930, '#name': u'analog_in_state', '#sent_time': 172.033268749}
mcu 'mcu': got {'#receive_time': 173.027512822, u'next_clock': 1746213504, u'oid': 17, u'value': 30531, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.05751923, u'next_clock': 1748373504, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.117523193, u'next_clock': 1752693504, u'oid': 26, u'value': 24949, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.327643544, u'next_clock': 1767813504, u'oid': 17, u'value': 30523, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.357619304, u'next_clock': 1769973504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.4176486, u'next_clock': 1774293504, u'oid': 26, u'value': 24972, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.627636896, u'next_clock': 1789413504, u'oid': 17, u'value': 30517, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.657614507, u'next_clock': 1791573504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.717567822, u'next_clock': 1795893504, u'oid': 26, u'value': 24975, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.927578748, u'next_clock': 1811013504, u'oid': 17, u'value': 30513, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 173.957571044, u'next_clock': 1813173504, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 173.017909674}
mcu 'mcu': got {'#receive_time': 174.017559766, u'next_clock': 1817493504, u'oid': 26, u'value': 25016, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.227583859, u'next_clock': 1832613504, u'oid': 17, u'value': 30534, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.257583266, u'next_clock': 1834773504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.317642266, u'next_clock': 1839093504, u'oid': 26, u'value': 25025, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.527649414, u'next_clock': 1854213504, u'oid': 17, u'value': 30542, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.557602896, u'next_clock': 1856373504, u'oid': 20, u'value': 14085, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.61759734, u'next_clock': 1860693504, u'oid': 26, u'value': 25041, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.827625025, u'next_clock': 1875813504, u'oid': 17, u'value': 30536, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.857621544, u'next_clock': 1877973504, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 174.917622951, u'next_clock': 1882293504, u'oid': 26, u'value': 25060, '#name': u'analog_in_state', '#sent_time': 174.002841285}
mcu 'mcu': got {'#receive_time': 175.127620729, u'next_clock': 1897413504, u'oid': 17, u'value': 30526, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.157623617, u'next_clock': 1899573504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.217701728, u'next_clock': 1903893504, u'oid': 26, u'value': 25068, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.427709451, u'next_clock': 1919013504, u'oid': 17, u'value': 30512, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.457739321, u'next_clock': 1921173504, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.51772258, u'next_clock': 1925493504, u'oid': 26, u'value': 25066, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.727734302, u'next_clock': 1940613504, u'oid': 17, u'value': 30526, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.757728673, u'next_clock': 1942773504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 175.817743413, u'next_clock': 1947093504, u'oid': 26, u'value': 25077, '#name': u'analog_in_state', '#sent_time': 174.987585506}
mcu 'mcu': got {'#receive_time': 176.02773945, u'next_clock': 1962213504, u'oid': 17, u'value': 30542, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.057766413, u'next_clock': 1964373504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.117751598, u'next_clock': 1968693504, u'oid': 26, u'value': 25084, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.327768598, u'next_clock': 1983813504, u'oid': 17, u'value': 30539, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.357749302, u'next_clock': 1985973504, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.417908635, u'next_clock': 1990293504, u'oid': 26, u'value': 25112, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.627894894, u'next_clock': 2005413504, u'oid': 17, u'value': 30535, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.657758265, u'next_clock': 2007573504, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.717795283, u'next_clock': 2011893504, u'oid': 26, u'value': 25115, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.927780468, u'next_clock': 2027013504, u'oid': 17, u'value': 30536, '#name': u'analog_in_state', '#sent_time': 175.971696672}
mcu 'mcu': got {'#receive_time': 176.957754339, u'next_clock': 2029173504, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.017773283, u'next_clock': 2033493504, u'oid': 26, u'value': 25161, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.227784301, u'next_clock': 2048613504, u'oid': 17, u'value': 30532, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.25777882, u'next_clock': 2050773504, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.317834949, u'next_clock': 2055093504, u'oid': 26, u'value': 25154, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.52787656, u'next_clock': 2070213504, u'oid': 17, u'value': 30542, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.557792838, u'next_clock': 2072373504, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.617781023, u'next_clock': 2076693504, u'oid': 26, u'value': 25206, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.827804782, u'next_clock': 2091813504, u'oid': 17, u'value': 30537, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.857799208, u'next_clock': 2093973504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 177.917799708, u'next_clock': 2098293504, u'oid': 26, u'value': 25244, '#name': u'analog_in_state', '#sent_time': 176.956201857}
mcu 'mcu': got {'#receive_time': 178.127811967, u'next_clock': 2113413504, u'oid': 17, u'value': 30547, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.157810505, u'next_clock': 2115573504, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.217793245, u'next_clock': 2119893504, u'oid': 26, u'value': 25239, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.427859264, u'next_clock': 2135013504, u'oid': 17, u'value': 30525, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.457843301, u'next_clock': 2137173504, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.517811949, u'next_clock': 2141493504, u'oid': 26, u'value': 25270, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.727826763, u'next_clock': 2156613504L, u'oid': 17, u'value': 30536, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.75784143, u'next_clock': 2158773504L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 178.817834523, u'next_clock': 2163093504L, u'oid': 26, u'value': 25274, '#name': u'analog_in_state', '#sent_time': 177.940395245}
mcu 'mcu': got {'#receive_time': 179.02784256, u'next_clock': 2178213504L, u'oid': 17, u'value': 30534, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.057841411, u'next_clock': 2180373504L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.117836041, u'next_clock': 2184693504L, u'oid': 26, u'value': 25302, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.327861078, u'next_clock': 2199813504L, u'oid': 17, u'value': 30532, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.357857207, u'next_clock': 2201973504L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.417861763, u'next_clock': 2206293504L, u'oid': 26, u'value': 25326, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.627914707, u'next_clock': 2221413504L, u'oid': 17, u'value': 30543, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.657855893, u'next_clock': 2223573504L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.717884392, u'next_clock': 2227893504L, u'oid': 26, u'value': 25335, '#name': u'analog_in_state', '#sent_time': 178.925054856}
mcu 'mcu': got {'#receive_time': 179.927884818, u'next_clock': 2243013504L, u'oid': 17, u'value': 30539, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 179.957887652, u'next_clock': 2245173504L, u'oid': 20, u'value': 14119, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.017884059, u'next_clock': 2249493504L, u'oid': 26, u'value': 25352, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.22787804, u'next_clock': 2264613504L, u'oid': 17, u'value': 30540, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.257918763, u'next_clock': 2266773504L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.317924466, u'next_clock': 2271093504L, u'oid': 26, u'value': 25367, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.527953318, u'next_clock': 2286213504L, u'oid': 17, u'value': 30538, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.557893485, u'next_clock': 2288373504L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.617937836, u'next_clock': 2292693504L, u'oid': 26, u'value': 25374, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.827912318, u'next_clock': 2307813504L, u'oid': 17, u'value': 30549, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.857897873, u'next_clock': 2309973504L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 179.909936689}
mcu 'mcu': got {'#receive_time': 180.917896373, u'next_clock': 2314293504L, u'oid': 26, u'value': 25373, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.127964188, u'next_clock': 2329413504L, u'oid': 17, u'value': 30554, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.157984429, u'next_clock': 2331573504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.217983206, u'next_clock': 2335893504L, u'oid': 26, u'value': 25400, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.428812503, u'next_clock': 2351013504L, u'oid': 17, u'value': 30554, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.458048243, u'next_clock': 2353173504L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.518021873, u'next_clock': 2357493504L, u'oid': 26, u'value': 25415, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.72801128, u'next_clock': 2372613504L, u'oid': 17, u'value': 30545, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.757996465, u'next_clock': 2374773504L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 181.818032817, u'next_clock': 2379093504L, u'oid': 26, u'value': 25432, '#name': u'analog_in_state', '#sent_time': 180.894923707}
mcu 'mcu': got {'#receive_time': 182.028027465, u'next_clock': 2394213504L, u'oid': 17, u'value': 30537, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.058023724, u'next_clock': 2396373504L, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.118064798, u'next_clock': 2400693504L, u'oid': 26, u'value': 25451, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.328037632, u'next_clock': 2415813504L, u'oid': 17, u'value': 30546, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.358066909, u'next_clock': 2417973504L, u'oid': 20, u'value': 14094, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.418201817, u'next_clock': 2422293504L, u'oid': 26, u'value': 25470, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.628086631, u'next_clock': 2437413504L, u'oid': 17, u'value': 30550, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.658062539, u'next_clock': 2439573504L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.718089187, u'next_clock': 2443893504L, u'oid': 26, u'value': 25477, '#name': u'analog_in_state', '#sent_time': 181.880057354}
mcu 'mcu': got {'#receive_time': 182.928062631, u'next_clock': 2459013504L, u'oid': 17, u'value': 30537, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 182.958101483, u'next_clock': 2461173504L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.018062909, u'next_clock': 2465493504L, u'oid': 26, u'value': 25538, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.228083001, u'next_clock': 2480613504L, u'oid': 17, u'value': 30557, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.258082205, u'next_clock': 2482773504L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.318110261, u'next_clock': 2487093504L, u'oid': 26, u'value': 25574, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.52810852, u'next_clock': 2502213504L, u'oid': 17, u'value': 30542, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.558052446, u'next_clock': 2504373504L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.618098427, u'next_clock': 2508693504L, u'oid': 26, u'value': 25578, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.828121927, u'next_clock': 2523813504L, u'oid': 17, u'value': 30555, '#name': u'analog_in_state', '#sent_time': 182.864220187}
mcu 'mcu': got {'#receive_time': 183.858103001, u'next_clock': 2525973504L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 183.918112668, u'next_clock': 2530293504L, u'oid': 26, u'value': 25593, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.128151149, u'next_clock': 2545413504L, u'oid': 17, u'value': 30559, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.158125223, u'next_clock': 2547573504L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.218119279, u'next_clock': 2551893504L, u'oid': 26, u'value': 25604, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.428261797, u'next_clock': 2567013504L, u'oid': 17, u'value': 30558, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.458182204, u'next_clock': 2569173504L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.518109797, u'next_clock': 2573493504L, u'oid': 26, u'value': 25602, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.728176334, u'next_clock': 2588613504L, u'oid': 17, u'value': 30553, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.758151741, u'next_clock': 2590773504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 184.818167686, u'next_clock': 2595093504L, u'oid': 26, u'value': 25611, '#name': u'analog_in_state', '#sent_time': 183.848460205}
mcu 'mcu': got {'#receive_time': 185.028189093, u'next_clock': 2610213504L, u'oid': 17, u'value': 30567, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.058211519, u'next_clock': 2612373504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.11818913, u'next_clock': 2616693504L, u'oid': 26, u'value': 25611, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.328222315, u'next_clock': 2631813504L, u'oid': 17, u'value': 30551, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.358260611, u'next_clock': 2633973504L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.418255611, u'next_clock': 2638293504L, u'oid': 26, u'value': 25640, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.628245407, u'next_clock': 2653413504L, u'oid': 17, u'value': 30551, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.658213685, u'next_clock': 2655573504L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.718250333, u'next_clock': 2659893504L, u'oid': 26, u'value': 25639, '#name': u'analog_in_state', '#sent_time': 184.833551908}
mcu 'mcu': got {'#receive_time': 185.928223055, u'next_clock': 2675013504L, u'oid': 17, u'value': 30565, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 185.958235778, u'next_clock': 2677173504L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.018439389, u'next_clock': 2681493504L, u'oid': 26, u'value': 25644, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.228241389, u'next_clock': 2696613504L, u'oid': 17, u'value': 30547, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.258265685, u'next_clock': 2698773504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.318296333, u'next_clock': 2703093504L, u'oid': 26, u'value': 25662, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.528230296, u'next_clock': 2718213504L, u'oid': 17, u'value': 30565, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.55820474, u'next_clock': 2720373504L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.618253574, u'next_clock': 2724693504L, u'oid': 26, u'value': 25681, '#name': u'analog_in_state', '#sent_time': 185.817755796}
mcu 'mcu': got {'#receive_time': 186.828267351, u'next_clock': 2739813504L, u'oid': 17, u'value': 30567, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 186.85825974, u'next_clock': 2741973504L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 186.918303425, u'next_clock': 2746293504L, u'oid': 26, u'value': 25695, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.12829061, u'next_clock': 2761413504L, u'oid': 17, u'value': 30547, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.158288647, u'next_clock': 2763573504L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.218275981, u'next_clock': 2767893504L, u'oid': 26, u'value': 25708, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.428430925, u'next_clock': 2783013504L, u'oid': 17, u'value': 30555, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.458298462, u'next_clock': 2785173504L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.518269888, u'next_clock': 2789493504L, u'oid': 26, u'value': 25718, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.728320462, u'next_clock': 2804613504L, u'oid': 17, u'value': 30556, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.758307277, u'next_clock': 2806773504L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 186.801971573}
mcu 'mcu': got {'#receive_time': 187.818299517, u'next_clock': 2811093504L, u'oid': 26, u'value': 25744, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.02831348, u'next_clock': 2826213504L, u'oid': 17, u'value': 30553, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.058346128, u'next_clock': 2828373504L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.118318424, u'next_clock': 2832693504L, u'oid': 26, u'value': 25768, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.328459573, u'next_clock': 2847813504L, u'oid': 17, u'value': 30584, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.358333628, u'next_clock': 2849973504L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.418408702, u'next_clock': 2854293504L, u'oid': 26, u'value': 25820, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.628344387, u'next_clock': 2869413504L, u'oid': 17, u'value': 30564, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.658360628, u'next_clock': 2871573504L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.718361943, u'next_clock': 2875893504L, u'oid': 26, u'value': 25795, '#name': u'analog_in_state', '#sent_time': 187.786218906}
mcu 'mcu': got {'#receive_time': 188.928380924, u'next_clock': 2891013504L, u'oid': 17, u'value': 30569, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 188.95836372, u'next_clock': 2893173504L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.018359368, u'next_clock': 2897493504L, u'oid': 26, u'value': 25811, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.228375905, u'next_clock': 2912613504L, u'oid': 17, u'value': 30567, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.25840409, u'next_clock': 2914773504L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.31850309, u'next_clock': 2919093504L, u'oid': 26, u'value': 25840, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.528388387, u'next_clock': 2934213504L, u'oid': 17, u'value': 30575, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.55834622, u'next_clock': 2936373504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.61840909, u'next_clock': 2940693504L, u'oid': 26, u'value': 25842, '#name': u'analog_in_state', '#sent_time': 188.77031435}
mcu 'mcu': got {'#receive_time': 189.828425775, u'next_clock': 2955813504L, u'oid': 17, u'value': 30560, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 189.858410312, u'next_clock': 2957973504L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 189.918436775, u'next_clock': 2962293504L, u'oid': 26, u'value': 25863, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.128434794, u'next_clock': 2977413504L, u'oid': 17, u'value': 30564, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.15842396, u'next_clock': 2979573504L, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.218421849, u'next_clock': 2983893504L, u'oid': 26, u'value': 25878, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.428557682, u'next_clock': 2999013504L, u'oid': 17, u'value': 30565, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.458419664, u'next_clock': 3001173504L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.51843259, u'next_clock': 3005493504L, u'oid': 26, u'value': 25883, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.728475756, u'next_clock': 3020613504L, u'oid': 17, u'value': 30573, '#name': u'analog_in_state', '#sent_time': 189.754575016}
mcu 'mcu': got {'#receive_time': 190.758439423, u'next_clock': 3022773504L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 190.818470904, u'next_clock': 3027093504L, u'oid': 26, u'value': 25884, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.028503478, u'next_clock': 3042213504L, u'oid': 17, u'value': 30571, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.058484886, u'next_clock': 3044373504L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.118490275, u'next_clock': 3048693504L, u'oid': 26, u'value': 25900, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.328562274, u'next_clock': 3063813504L, u'oid': 17, u'value': 30582, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.358465923, u'next_clock': 3065973504L, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.418722571, u'next_clock': 3070293504L, u'oid': 26, u'value': 25929, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.628436959, u'next_clock': 3085413504L, u'oid': 17, u'value': 30563, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.658419811, u'next_clock': 3087573504L, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.71842333, u'next_clock': 3091893504L, u'oid': 26, u'value': 25931, '#name': u'analog_in_state', '#sent_time': 190.738639404}
mcu 'mcu': got {'#receive_time': 191.928469756, u'next_clock': 3107013504L, u'oid': 17, u'value': 30576, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 191.958424089, u'next_clock': 3109173504L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.018433737, u'next_clock': 3113493504L, u'oid': 26, u'value': 25955, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.228478959, u'next_clock': 3128613504L, u'oid': 17, u'value': 30572, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.258443163, u'next_clock': 3130773504L, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.318455089, u'next_clock': 3135093504L, u'oid': 26, u'value': 25960, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.528522311, u'next_clock': 3150213504L, u'oid': 17, u'value': 30586, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.55849357, u'next_clock': 3152373504L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.618554274, u'next_clock': 3156693504L, u'oid': 26, u'value': 25960, '#name': u'analog_in_state', '#sent_time': 191.7234327}
mcu 'mcu': got {'#receive_time': 192.828559348, u'next_clock': 3171813504L, u'oid': 17, u'value': 30576, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 192.858581755, u'next_clock': 3173973504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 192.918553162, u'next_clock': 3178293504L, u'oid': 26, u'value': 25980, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.128562718, u'next_clock': 3193413504L, u'oid': 17, u'value': 30572, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.158567514, u'next_clock': 3195573504L, u'oid': 20, u'value': 14089, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.218595033, u'next_clock': 3199893504L, u'oid': 26, u'value': 25998, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.428619069, u'next_clock': 3215013504L, u'oid': 17, u'value': 30575, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.458585736, u'next_clock': 3217173504L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.518589755, u'next_clock': 3221493504L, u'oid': 26, u'value': 26020, '#name': u'analog_in_state', '#sent_time': 192.708166903}
mcu 'mcu': got {'#receive_time': 193.728583477, u'next_clock': 3236613504L, u'oid': 17, u'value': 30575, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 193.758602051, u'next_clock': 3238773504L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 193.818603403, u'next_clock': 3243093504L, u'oid': 26, u'value': 26031, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.028608365, u'next_clock': 3258213504L, u'oid': 17, u'value': 30576, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.058600069, u'next_clock': 3260373504L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.118641402, u'next_clock': 3264693504L, u'oid': 26, u'value': 26038, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.328684587, u'next_clock': 3279813504L, u'oid': 17, u'value': 30589, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.358619087, u'next_clock': 3281973504L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.418684513, u'next_clock': 3286293504L, u'oid': 26, u'value': 26041, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.628656217, u'next_clock': 3301413504L, u'oid': 17, u'value': 30586, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.658646772, u'next_clock': 3303573504L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 193.693404792}
mcu 'mcu': got {'#receive_time': 194.718642884, u'next_clock': 3307893504L, u'oid': 26, u'value': 26076, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 194.928668198, u'next_clock': 3323013504L, u'oid': 17, u'value': 30586, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 194.958646161, u'next_clock': 3325173504L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.018650772, u'next_clock': 3329493504L, u'oid': 26, u'value': 26074, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.228734309, u'next_clock': 3344613504L, u'oid': 17, u'value': 30584, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.258687476, u'next_clock': 3346773504L, u'oid': 20, u'value': 14121, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.318679846, u'next_clock': 3351093504L, u'oid': 26, u'value': 26084, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.52866442, u'next_clock': 3366213504L, u'oid': 17, u'value': 30588, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.558635216, u'next_clock': 3368373504L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.618684679, u'next_clock': 3372693504L, u'oid': 26, u'value': 26098, '#name': u'analog_in_state', '#sent_time': 194.677638902}
mcu 'mcu': got {'#receive_time': 195.828732198, u'next_clock': 3387813504L, u'oid': 17, u'value': 30569, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 195.858693087, u'next_clock': 3389973504L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 195.918699012, u'next_clock': 3394293504L, u'oid': 26, u'value': 26100, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.128709846, u'next_clock': 3409413504L, u'oid': 17, u'value': 30586, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.158707883, u'next_clock': 3411573504L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.218733938, u'next_clock': 3415893504L, u'oid': 26, u'value': 26104, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.428776808, u'next_clock': 3431013504L, u'oid': 17, u'value': 30593, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.458719271, u'next_clock': 3433173504L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.518722975, u'next_clock': 3437493504L, u'oid': 26, u'value': 26129, '#name': u'analog_in_state', '#sent_time': 195.661898179}
mcu 'mcu': got {'#receive_time': 196.728741642, u'next_clock': 3452613504L, u'oid': 17, u'value': 30580, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 196.758747753, u'next_clock': 3454773504L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 196.818751512, u'next_clock': 3459093504L, u'oid': 26, u'value': 26141, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.02890453, u'next_clock': 3474213504L, u'oid': 17, u'value': 30586, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.058749623, u'next_clock': 3476373504L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.118795864, u'next_clock': 3480693504L, u'oid': 26, u'value': 26149, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.328862882, u'next_clock': 3495813504L, u'oid': 17, u'value': 30590, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.358748308, u'next_clock': 3497973504L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.418762789, u'next_clock': 3502293504L, u'oid': 26, u'value': 26172, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.628761771, u'next_clock': 3517413504L, u'oid': 17, u'value': 30591, '#name': u'analog_in_state', '#sent_time': 196.64694879}
mcu 'mcu': got {'#receive_time': 197.658734511, u'next_clock': 3519573504L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 197.718776789, u'next_clock': 3523893504L, u'oid': 26, u'value': 26200, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 197.928813419, u'next_clock': 3539013504L, u'oid': 17, u'value': 30582, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 197.958795956, u'next_clock': 3541173504L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.018769363, u'next_clock': 3545493504L, u'oid': 26, u'value': 26222, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.228780826, u'next_clock': 3560613504L, u'oid': 17, u'value': 30590, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.258776937, u'next_clock': 3562773504L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.31880977, u'next_clock': 3567093504L, u'oid': 26, u'value': 26233, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.5288369, u'next_clock': 3582213504L, u'oid': 17, u'value': 30585, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.558784696, u'next_clock': 3584373504L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 197.632029715}
mcu 'mcu': got {'#receive_time': 198.618766844, u'next_clock': 3588693504L, u'oid': 26, u'value': 26251, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 198.828809826, u'next_clock': 3603813504L, u'oid': 17, u'value': 30602, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 198.858808992, u'next_clock': 3605973504L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 198.918834937, u'next_clock': 3610293504L, u'oid': 26, u'value': 26291, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.128906751, u'next_clock': 3625413504L, u'oid': 17, u'value': 30587, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.158822196, u'next_clock': 3627573504L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.218817714, u'next_clock': 3631893504L, u'oid': 26, u'value': 26305, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.428840899, u'next_clock': 3647013504L, u'oid': 17, u'value': 30599, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.458851733, u'next_clock': 3649173504L, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.518945862, u'next_clock': 3653493504L, u'oid': 26, u'value': 26309, '#name': u'analog_in_state', '#sent_time': 198.616816455}
mcu 'mcu': got {'#receive_time': 199.72887201, u'next_clock': 3668613504L, u'oid': 17, u'value': 30596, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 199.758853788, u'next_clock': 3670773504L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 199.818830899, u'next_clock': 3675093504L, u'oid': 26, u'value': 26330, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.028964714, u'next_clock': 3690213504L, u'oid': 17, u'value': 30593, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.058829862, u'next_clock': 3692373504L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.118917251, u'next_clock': 3696693504L, u'oid': 26, u'value': 26344, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.328905417, u'next_clock': 3711813504L, u'oid': 17, u'value': 30590, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.358879973, u'next_clock': 3713973504L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.418911602, u'next_clock': 3718293504L, u'oid': 26, u'value': 26351, '#name': u'analog_in_state', '#sent_time': 199.601658732}
mcu 'mcu': got {'#receive_time': 200.62886551, u'next_clock': 3733413504L, u'oid': 17, u'value': 30598, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 200.65887501, u'next_clock': 3735573504L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 200.71893638, u'next_clock': 3739893504L, u'oid': 26, u'value': 26374, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 200.928989935, u'next_clock': 3755013504L, u'oid': 17, u'value': 30595, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 200.958970121, u'next_clock': 3757173504L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.018975083, u'next_clock': 3761493504L, u'oid': 26, u'value': 26391, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.229062157, u'next_clock': 3776613504L, u'oid': 17, u'value': 30593, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.258989009, u'next_clock': 3778773504L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.318951917, u'next_clock': 3783093504L, u'oid': 26, u'value': 26396, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.528923065, u'next_clock': 3798213504L, u'oid': 17, u'value': 30583, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.558894139, u'next_clock': 3800373504L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 200.586611454}
mcu 'mcu': got {'#receive_time': 201.618882065, u'next_clock': 3804693504L, u'oid': 26, u'value': 26402, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 201.82891462, u'next_clock': 3819813504L, u'oid': 17, u'value': 30604, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 201.858907694, u'next_clock': 3821973504L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 201.918917953, u'next_clock': 3826293504L, u'oid': 26, u'value': 26408, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.128952027, u'next_clock': 3841413504L, u'oid': 17, u'value': 30595, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.158912453, u'next_clock': 3843573504L, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.218959601, u'next_clock': 3847893504L, u'oid': 26, u'value': 26423, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.429058268, u'next_clock': 3863013504L, u'oid': 17, u'value': 30613, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.460485416, u'next_clock': 3865173504L, u'oid': 20, u'value': 14119, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.519004009, u'next_clock': 3869493504L, u'oid': 26, u'value': 26434, '#name': u'analog_in_state', '#sent_time': 201.570889657}
mcu 'mcu': got {'#receive_time': 202.729018323, u'next_clock': 3884613504L, u'oid': 17, u'value': 30583, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 202.759011916, u'next_clock': 3886773504L, u'oid': 20, u'value': 14085, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 202.81902749, u'next_clock': 3891093504L, u'oid': 26, u'value': 26449, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.029060582, u'next_clock': 3906213504L, u'oid': 17, u'value': 30613, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.059091286, u'next_clock': 3908373504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.119039564, u'next_clock': 3912693504L, u'oid': 26, u'value': 26458, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.329066415, u'next_clock': 3927813504L, u'oid': 17, u'value': 30598, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.359032952, u'next_clock': 3929973504L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.419097915, u'next_clock': 3934293504L, u'oid': 26, u'value': 26468, '#name': u'analog_in_state', '#sent_time': 202.555783583}
mcu 'mcu': got {'#receive_time': 203.629035249, u'next_clock': 3949413504L, u'oid': 17, u'value': 30607, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 203.659103193, u'next_clock': 3951573504L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 203.719067878, u'next_clock': 3955893504L, u'oid': 26, u'value': 26483, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 203.929100711, u'next_clock': 3971013504L, u'oid': 17, u'value': 30583, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 203.959076119, u'next_clock': 3973173504L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 204.019079285, u'next_clock': 3977493504L, u'oid': 26, u'value': 26506, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 204.229145619, u'next_clock': 3992613504L, u'oid': 17, u'value': 30579, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 204.259119082, u'next_clock': 3994773504L, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 204.319095915, u'next_clock': 3999093504L, u'oid': 26, u'value': 26519, '#name': u'analog_in_state', '#sent_time': 203.539934545}
mcu 'mcu': got {'#receive_time': 204.529049711, u'next_clock': 4014213504L, u'oid': 17, u'value': 30587, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 204.559072822, u'next_clock': 4016373504L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 204.619103544, u'next_clock': 4020693504L, u'oid': 26, u'value': 26504, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 204.82912784, u'next_clock': 4035813504L, u'oid': 17, u'value': 30601, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 204.85916547, u'next_clock': 4037973504L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 204.919118711, u'next_clock': 4042293504L, u'oid': 26, u'value': 26538, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 205.129233266, u'next_clock': 4057413504L, u'oid': 17, u'value': 30595, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 205.159134451, u'next_clock': 4059573504L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 205.219130637, u'next_clock': 4063893504L, u'oid': 26, u'value': 26540, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 205.429205896, u'next_clock': 4079013504L, u'oid': 17, u'value': 30619, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 205.459159377, u'next_clock': 4081173504L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 204.5241136}
mcu 'mcu': got {'#receive_time': 205.519107525, u'next_clock': 4085493504L, u'oid': 26, u'value': 26549, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 205.729181636, u'next_clock': 4100613504L, u'oid': 17, u'value': 30602, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 205.759166933, u'next_clock': 4102773504L, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 205.819168692, u'next_clock': 4107093504L, u'oid': 26, u'value': 26576, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.02923408, u'next_clock': 4122213504L, u'oid': 17, u'value': 30598, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.059213525, u'next_clock': 4124373504L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.119173562, u'next_clock': 4128693504L, u'oid': 26, u'value': 26582, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.329194654, u'next_clock': 4143813504L, u'oid': 17, u'value': 30617, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.359188488, u'next_clock': 4145973504L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.419224525, u'next_clock': 4150293504L, u'oid': 26, u'value': 26596, '#name': u'analog_in_state', '#sent_time': 205.508343155}
mcu 'mcu': got {'#receive_time': 206.629160451, u'next_clock': 4165413504L, u'oid': 17, u'value': 30608, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 206.659226247, u'next_clock': 4167573504L, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 206.719207895, u'next_clock': 4171893504L, u'oid': 26, u'value': 26593, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 206.929253802, u'next_clock': 4187013504L, u'oid': 17, u'value': 30609, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 206.959221691, u'next_clock': 4189173504L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 207.019256117, u'next_clock': 4193493504L, u'oid': 26, u'value': 26611, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 207.229228043, u'next_clock': 4208613504L, u'oid': 17, u'value': 30614, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 207.259235228, u'next_clock': 4210773504L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 207.319272098, u'next_clock': 4215093504L, u'oid': 26, u'value': 26608, '#name': u'analog_in_state', '#sent_time': 206.495930895}
mcu 'mcu': got {'#receive_time': 207.529225617, u'next_clock': 4230213504L, u'oid': 17, u'value': 30610, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 207.559202468, u'next_clock': 4232373504L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 207.619207357, u'next_clock': 4236693504L, u'oid': 26, u'value': 26623, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 207.829266413, u'next_clock': 4251813504L, u'oid': 17, u'value': 30619, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 207.859261061, u'next_clock': 4253973504L, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 207.919292394, u'next_clock': 4258293504L, u'oid': 26, u'value': 26614, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 208.129345227, u'next_clock': 4273413504L, u'oid': 17, u'value': 30615, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 208.159279338, u'next_clock': 4275573504L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 208.219274098, u'next_clock': 4279893504L, u'oid': 26, u'value': 26621, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 208.429309579, u'next_clock': 46208, u'oid': 17, u'value': 30614, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 208.459340653, u'next_clock': 2206208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 207.47692908}
mcu 'mcu': got {'#receive_time': 208.519312505, u'next_clock': 6526208, u'oid': 26, u'value': 26655, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 208.729328171, u'next_clock': 21646208, u'oid': 17, u'value': 30633, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 208.759303486, u'next_clock': 23806208, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 208.819318708, u'next_clock': 28126208, u'oid': 26, u'value': 26663, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.029418097, u'next_clock': 43246208, u'oid': 17, u'value': 30615, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.059332338, u'next_clock': 45406208, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.119327023, u'next_clock': 49726208, u'oid': 26, u'value': 26683, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.329329782, u'next_clock': 64846208, u'oid': 17, u'value': 30613, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.359334838, u'next_clock': 67006208, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.419342208, u'next_clock': 71326208, u'oid': 26, u'value': 26710, '#name': u'analog_in_state', '#sent_time': 208.461283338}
mcu 'mcu': got {'#receive_time': 209.629329023, u'next_clock': 86446208, u'oid': 17, u'value': 30633, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 209.659395856, u'next_clock': 88606208, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 209.719357486, u'next_clock': 92926208, u'oid': 26, u'value': 26718, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 209.929376263, u'next_clock': 108046208, u'oid': 17, u'value': 30638, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 209.959424449, u'next_clock': 110206208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 210.019358023, u'next_clock': 114526208, u'oid': 26, u'value': 26735, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 210.229449708, u'next_clock': 129646208, u'oid': 17, u'value': 30628, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 210.259382152, u'next_clock': 131806208, u'oid': 20, u'value': 14093, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 210.3193798, u'next_clock': 136126208, u'oid': 26, u'value': 26751, '#name': u'analog_in_state', '#sent_time': 209.445645856}
mcu 'mcu': got {'#receive_time': 210.52937767, u'next_clock': 151246208, u'oid': 17, u'value': 30625, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 210.559336744, u'next_clock': 153406208, u'oid': 20, u'value': 14118, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 210.619341578, u'next_clock': 157726208, u'oid': 26, u'value': 26783, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 210.829380485, u'next_clock': 172846208, u'oid': 17, u'value': 30618, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 210.859395818, u'next_clock': 175006208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 210.919384781, u'next_clock': 179326208, u'oid': 26, u'value': 26801, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 211.129517077, u'next_clock': 194446208, u'oid': 17, u'value': 30620, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 211.159365374, u'next_clock': 196606208, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 211.219355411, u'next_clock': 200926208, u'oid': 26, u'value': 26790, '#name': u'analog_in_state', '#sent_time': 210.430199763}
mcu 'mcu': got {'#receive_time': 211.429386633, u'next_clock': 216046208, u'oid': 17, u'value': 30626, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 211.459457411, u'next_clock': 218206208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 211.519368133, u'next_clock': 222526208, u'oid': 26, u'value': 26819, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 211.729444447, u'next_clock': 237646208, u'oid': 17, u'value': 30602, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 211.759414855, u'next_clock': 239806208, u'oid': 20, u'value': 14088, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 211.819466133, u'next_clock': 244126208, u'oid': 26, u'value': 26848, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 212.029528595, u'next_clock': 259246208, u'oid': 17, u'value': 30615, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 212.059453744, u'next_clock': 261406208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 212.119469318, u'next_clock': 265726208, u'oid': 26, u'value': 26846, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 212.329485651, u'next_clock': 280846208, u'oid': 17, u'value': 30609, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 212.359501892, u'next_clock': 283006208, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 211.415179744}
mcu 'mcu': got {'#receive_time': 212.419484373, u'next_clock': 287326208, u'oid': 26, u'value': 26870, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 212.629502891, u'next_clock': 302446208, u'oid': 17, u'value': 30630, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 212.659463225, u'next_clock': 304606208, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 212.719497465, u'next_clock': 308926208, u'oid': 26, u'value': 26878, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 212.929654095, u'next_clock': 324046208, u'oid': 17, u'value': 30620, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 212.959521428, u'next_clock': 326206208, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 213.019506799, u'next_clock': 330526208, u'oid': 26, u'value': 26888, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 213.22952228, u'next_clock': 345646208, u'oid': 17, u'value': 30627, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 213.259520669, u'next_clock': 347806208, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 213.319558261, u'next_clock': 352126208, u'oid': 26, u'value': 26886, '#name': u'analog_in_state', '#sent_time': 212.400484725}
mcu 'mcu': got {'#receive_time': 213.529596965, u'next_clock': 367246208, u'oid': 17, u'value': 30613, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 213.559484391, u'next_clock': 369406208, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 213.619493854, u'next_clock': 373726208, u'oid': 26, u'value': 26908, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 213.829568205, u'next_clock': 388846208, u'oid': 17, u'value': 30630, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 213.859552539, u'next_clock': 391006208, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 213.919658298, u'next_clock': 395326208, u'oid': 26, u'value': 26903, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 214.129574039, u'next_clock': 410446208, u'oid': 17, u'value': 30646, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 214.159579983, u'next_clock': 412606208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 214.219567261, u'next_clock': 416926208, u'oid': 26, u'value': 26919, '#name': u'analog_in_state', '#sent_time': 213.384556132}
mcu 'mcu': got {'#receive_time': 214.429651594, u'next_clock': 432046208, u'oid': 17, u'value': 30634, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 214.45964052, u'next_clock': 434206208, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 214.519612279, u'next_clock': 438526208, u'oid': 26, u'value': 26934, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 214.72961039, u'next_clock': 453646208, u'oid': 17, u'value': 30630, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 214.759597742, u'next_clock': 455806208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 214.819603797, u'next_clock': 460126208, u'oid': 26, u'value': 26942, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 215.029708538, u'next_clock': 475246208, u'oid': 17, u'value': 30603, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 215.059617279, u'next_clock': 477406208, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 215.119614964, u'next_clock': 481726208, u'oid': 26, u'value': 26956, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 215.329656927, u'next_clock': 496846208, u'oid': 17, u'value': 30636, '#name': u'analog_in_state', '#sent_time': 214.368771779}
mcu 'mcu': got {'#receive_time': 215.359611482, u'next_clock': 499006208, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 215.41963426, u'next_clock': 503326208, u'oid': 26, u'value': 26955, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 215.629627019, u'next_clock': 518446208, u'oid': 17, u'value': 30649, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 215.659650741, u'next_clock': 520606208, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 215.719651075, u'next_clock': 524926208, u'oid': 26, u'value': 26971, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 215.929752056, u'next_clock': 540046208, u'oid': 17, u'value': 30647, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 215.959651908, u'next_clock': 542206208, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 216.019661649, u'next_clock': 546526208, u'oid': 26, u'value': 26977, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 216.229756723, u'next_clock': 561646208, u'oid': 17, u'value': 30617, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 216.259674, u'next_clock': 563806208, u'oid': 20, u'value': 14121, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 216.319646704, u'next_clock': 568126208, u'oid': 26, u'value': 26989, '#name': u'analog_in_state', '#sent_time': 215.352948242}
mcu 'mcu': got {'#receive_time': 216.529784593, u'next_clock': 583246208, u'oid': 17, u'value': 30645, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 216.559662704, u'next_clock': 585406208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 216.619668945, u'next_clock': 589726208, u'oid': 26, u'value': 26998, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 216.829682315, u'next_clock': 604846208, u'oid': 17, u'value': 30649, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 216.859794889, u'next_clock': 607006208, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 216.919674926, u'next_clock': 611326208, u'oid': 26, u'value': 27020, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 217.129777796, u'next_clock': 626446208, u'oid': 17, u'value': 30664, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 217.159709241, u'next_clock': 628606208, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 217.219692463, u'next_clock': 632926208, u'oid': 26, u'value': 27023, '#name': u'analog_in_state', '#sent_time': 216.337195871}
mcu 'mcu': got {'#receive_time': 217.429708351, u'next_clock': 648046208, u'oid': 17, u'value': 30627, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 217.459730963, u'next_clock': 650206208, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 217.519704925, u'next_clock': 654526208, u'oid': 26, u'value': 27029, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 217.729790796, u'next_clock': 669646208, u'oid': 17, u'value': 30657, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 217.759713592, u'next_clock': 671806208, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 217.819722166, u'next_clock': 676126208, u'oid': 26, u'value': 27060, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 218.029798444, u'next_clock': 691246208, u'oid': 17, u'value': 30622, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 218.059757499, u'next_clock': 693406208, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 218.119731258, u'next_clock': 697726208, u'oid': 26, u'value': 27062, '#name': u'analog_in_state', '#sent_time': 217.322145222}
mcu 'mcu': got {'#receive_time': 218.329787444, u'next_clock': 712846208, u'oid': 17, u'value': 30653, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.359741758, u'next_clock': 715006208, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.41975361, u'next_clock': 719326208, u'oid': 26, u'value': 27050, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.629767573, u'next_clock': 734446208, u'oid': 17, u'value': 30634, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.659784499, u'next_clock': 736606208, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.719743166, u'next_clock': 740926208, u'oid': 26, u'value': 27099, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.929955925, u'next_clock': 756046208, u'oid': 17, u'value': 30644, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 218.959782091, u'next_clock': 758206208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 219.019761147, u'next_clock': 762526208, u'oid': 26, u'value': 27093, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 219.229778943, u'next_clock': 777646208, u'oid': 17, u'value': 30653, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 219.259779776, u'next_clock': 779806208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 218.307007758}
mcu 'mcu': got {'#receive_time': 219.319744424, u'next_clock': 784126208, u'oid': 26, u'value': 27100, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 219.529820628, u'next_clock': 799246208, u'oid': 17, u'value': 30649, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 219.559796517, u'next_clock': 801406208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 219.619829184, u'next_clock': 805726208, u'oid': 26, u'value': 27099, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 219.829850646, u'next_clock': 820846208, u'oid': 17, u'value': 30656, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 219.85980298, u'next_clock': 823006208, u'oid': 20, u'value': 14091, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 219.919862683, u'next_clock': 827326208, u'oid': 26, u'value': 27120, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 220.129901979, u'next_clock': 842446208, u'oid': 17, u'value': 30663, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 220.159848628, u'next_clock': 844606208, u'oid': 20, u'value': 14084, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 220.219856813, u'next_clock': 848926208, u'oid': 26, u'value': 27121, '#name': u'analog_in_state', '#sent_time': 219.291861387}
mcu 'mcu': got {'#receive_time': 220.429886035, u'next_clock': 864046208, u'oid': 17, u'value': 30659, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 220.45997559, u'next_clock': 866206208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 220.519921627, u'next_clock': 870526208, u'oid': 26, u'value': 27122, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 220.730011146, u'next_clock': 885646208, u'oid': 17, u'value': 30665, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 220.759977053, u'next_clock': 887806208, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 220.820023775, u'next_clock': 892126208, u'oid': 26, u'value': 27124, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 221.029902775, u'next_clock': 907246208, u'oid': 17, u'value': 30658, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 221.059894405, u'next_clock': 909406208, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 221.119901886, u'next_clock': 913726208, u'oid': 26, u'value': 27134, '#name': u'analog_in_state', '#sent_time': 220.276845016}
mcu 'mcu': got {'#receive_time': 221.329912571, u'next_clock': 928846208, u'oid': 17, u'value': 30640, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.359929757, u'next_clock': 931006208, u'oid': 20, u'value': 14126, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.41991696, u'next_clock': 935326208, u'oid': 26, u'value': 27128, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.629981997, u'next_clock': 950446208, u'oid': 17, u'value': 30649, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.659943256, u'next_clock': 952606208, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.719943812, u'next_clock': 956926208, u'oid': 26, u'value': 27134, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.930086386, u'next_clock': 972046208, u'oid': 17, u'value': 30671, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 221.959957571, u'next_clock': 974206208, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 222.01995133, u'next_clock': 978526208, u'oid': 26, u'value': 27174, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 222.229972886, u'next_clock': 993646208, u'oid': 17, u'value': 30674, '#name': u'analog_in_state', '#sent_time': 221.261834405}
mcu 'mcu': got {'#receive_time': 222.259945608, u'next_clock': 995806208, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.319971052, u'next_clock': 1000126208, u'oid': 26, u'value': 27194, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.529955126, u'next_clock': 1015246208, u'oid': 17, u'value': 30674, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.55989796, u'next_clock': 1017406208, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.619905608, u'next_clock': 1021726208, u'oid': 26, u'value': 27199, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.829953478, u'next_clock': 1036846208, u'oid': 17, u'value': 30658, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.859920737, u'next_clock': 1039006208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 222.91991583, u'next_clock': 1043326208, u'oid': 26, u'value': 27226, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 223.129942015, u'next_clock': 1058446208, u'oid': 17, u'value': 30666, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 223.159926552, u'next_clock': 1060606208, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 223.219971978, u'next_clock': 1064926208, u'oid': 26, u'value': 27243, '#name': u'analog_in_state', '#sent_time': 222.24607883}
mcu 'mcu': got {'#receive_time': 223.430064144, u'next_clock': 1080046208, u'oid': 17, u'value': 30640, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 223.460128755, u'next_clock': 1082206208, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 223.520072052, u'next_clock': 1086526208, u'oid': 26, u'value': 27264, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 223.729976163, u'next_clock': 1101646208, u'oid': 17, u'value': 30676, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 223.760024959, u'next_clock': 1103806208, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 223.819976348, u'next_clock': 1108126208, u'oid': 26, u'value': 27277, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 224.029985514, u'next_clock': 1123246208, u'oid': 17, u'value': 30670, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 224.059978348, u'next_clock': 1125406208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 224.119977051, u'next_clock': 1129726208, u'oid': 26, u'value': 27282, '#name': u'analog_in_state', '#sent_time': 223.231015367}
mcu 'mcu': got {'#receive_time': 224.33006157, u'next_clock': 1144846208, u'oid': 17, u'value': 30652, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.360076847, u'next_clock': 1147006208, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.420065625, u'next_clock': 1151326208, u'oid': 26, u'value': 27277, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.630023625, u'next_clock': 1166446208, u'oid': 17, u'value': 30664, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.659999495, u'next_clock': 1168606208, u'oid': 20, u'value': 14115, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.720032773, u'next_clock': 1172926208, u'oid': 26, u'value': 27299, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.930033403, u'next_clock': 1188046208, u'oid': 17, u'value': 30649, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 224.960018421, u'next_clock': 1190206208, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 225.020013588, u'next_clock': 1194526208, u'oid': 26, u'value': 27302, '#name': u'analog_in_state', '#sent_time': 224.215881588}
mcu 'mcu': got {'#receive_time': 225.230072643, u'next_clock': 1209646208, u'oid': 17, u'value': 30660, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.260104939, u'next_clock': 1211806208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.320117791, u'next_clock': 1216126208, u'oid': 26, u'value': 27328, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.53021018, u'next_clock': 1231246208, u'oid': 17, u'value': 30671, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.560082532, u'next_clock': 1233406208, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.62008718, u'next_clock': 1237726208, u'oid': 26, u'value': 27338, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.830270643, u'next_clock': 1252846208, u'oid': 17, u'value': 30672, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.860139272, u'next_clock': 1255006208, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 225.920181754, u'next_clock': 1259326208, u'oid': 26, u'value': 27350, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 226.130166476, u'next_clock': 1274446208, u'oid': 17, u'value': 30674, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 226.160152143, u'next_clock': 1276606208, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 225.200517717}
mcu 'mcu': got {'#receive_time': 226.220157791, u'next_clock': 1280926208, u'oid': 26, u'value': 27383, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 226.430183939, u'next_clock': 1296046208, u'oid': 17, u'value': 30669, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 226.460248013, u'next_clock': 1298206208, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 226.520172846, u'next_clock': 1302526208, u'oid': 26, u'value': 27389, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 226.730310216, u'next_clock': 1317646208, u'oid': 17, u'value': 30660, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 226.760193161, u'next_clock': 1319806208, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 226.820207661, u'next_clock': 1324126208, u'oid': 26, u'value': 27395, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 227.03020229, u'next_clock': 1339246208, u'oid': 17, u'value': 30659, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 227.060231068, u'next_clock': 1341406208, u'oid': 20, u'value': 14119, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 227.120200216, u'next_clock': 1345726208, u'oid': 26, u'value': 27406, '#name': u'analog_in_state', '#sent_time': 226.184763717}
mcu 'mcu': got {'#receive_time': 227.330217401, u'next_clock': 1360846208, u'oid': 17, u'value': 30684, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.360223697, u'next_clock': 1363006208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.420217734, u'next_clock': 1367326208, u'oid': 26, u'value': 27413, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.630238049, u'next_clock': 1382446208, u'oid': 17, u'value': 30674, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.660217605, u'next_clock': 1384606208, u'oid': 20, u'value': 14087, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.720319642, u'next_clock': 1388926208, u'oid': 26, u'value': 27410, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.930278827, u'next_clock': 1404046208, u'oid': 17, u'value': 30674, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 227.96023953, u'next_clock': 1406206208, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 228.02023953, u'next_clock': 1410526208, u'oid': 26, u'value': 27434, '#name': u'analog_in_state', '#sent_time': 227.169896346}
mcu 'mcu': got {'#receive_time': 228.230251401, u'next_clock': 1425646208, u'oid': 17, u'value': 30663, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.260281012, u'next_clock': 1427806208, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.320258419, u'next_clock': 1432126208, u'oid': 26, u'value': 27435, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.530268678, u'next_clock': 1447246208, u'oid': 17, u'value': 30679, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.560245752, u'next_clock': 1449406208, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.6202584, u'next_clock': 1453726208, u'oid': 26, u'value': 27441, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.830402178, u'next_clock': 1468846208, u'oid': 17, u'value': 30673, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.860322197, u'next_clock': 1471006208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 228.920295141, u'next_clock': 1475326208, u'oid': 26, u'value': 27452, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 229.130353807, u'next_clock': 1490446208, u'oid': 17, u'value': 30676, '#name': u'analog_in_state', '#sent_time': 228.154062771}
mcu 'mcu': got {'#receive_time': 229.160305733, u'next_clock': 1492606208, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.220301678, u'next_clock': 1496926208, u'oid': 26, u'value': 27458, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.430326715, u'next_clock': 1512046208, u'oid': 17, u'value': 30658, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.460543604, u'next_clock': 1514206208, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.520350326, u'next_clock': 1518526208, u'oid': 26, u'value': 27503, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.73035777, u'next_clock': 1533646208, u'oid': 17, u'value': 30677, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.760250659, u'next_clock': 1535806208, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 229.820270714, u'next_clock': 1540126208, u'oid': 26, u'value': 27484, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 230.030266659, u'next_clock': 1555246208, u'oid': 17, u'value': 30681, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 230.060304733, u'next_clock': 1557406208, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 230.120276974, u'next_clock': 1561726208, u'oid': 26, u'value': 27501, '#name': u'analog_in_state', '#sent_time': 229.138186159}
mcu 'mcu': got {'#receive_time': 230.330325844, u'next_clock': 1576846208, u'oid': 17, u'value': 30660, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.360304307, u'next_clock': 1579006208, u'oid': 20, u'value': 14090, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.420334862, u'next_clock': 1583326208, u'oid': 26, u'value': 27502, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.630393992, u'next_clock': 1598446208, u'oid': 17, u'value': 30657, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.660287158, u'next_clock': 1600606208, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.720300251, u'next_clock': 1604926208, u'oid': 26, u'value': 27557, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.930336936, u'next_clock': 1620046208, u'oid': 17, u'value': 30682, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 230.960343214, u'next_clock': 1622206208, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 231.020344862, u'next_clock': 1626526208, u'oid': 26, u'value': 27549, '#name': u'analog_in_state', '#sent_time': 230.123046548}
mcu 'mcu': got {'#receive_time': 231.230388028, u'next_clock': 1641646208, u'oid': 17, u'value': 30671, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.260400899, u'next_clock': 1643806208, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.320420232, u'next_clock': 1648126208, u'oid': 26, u'value': 27591, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.53055438, u'next_clock': 1663246208, u'oid': 17, u'value': 30670, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.560379232, u'next_clock': 1665406208, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.620407713, u'next_clock': 1669726208, u'oid': 26, u'value': 27597, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.830482435, u'next_clock': 1684846208, u'oid': 17, u'value': 30673, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.860465732, u'next_clock': 1687006208, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 231.920493306, u'next_clock': 1691326208, u'oid': 26, u'value': 27612, '#name': u'analog_in_state', '#sent_time': 231.107987936}
mcu 'mcu': got {'#receive_time': 232.130433046, u'next_clock': 1706446208, u'oid': 17, u'value': 30693, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.160504417, u'next_clock': 1708606208, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.220469083, u'next_clock': 1712926208, u'oid': 26, u'value': 27615, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.430492861, u'next_clock': 1728046208, u'oid': 17, u'value': 30682, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.460595824, u'next_clock': 1730206208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.520504657, u'next_clock': 1734526208, u'oid': 26, u'value': 27649, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.730640009, u'next_clock': 1749646208, u'oid': 17, u'value': 30688, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.760531657, u'next_clock': 1751806208, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 232.820517713, u'next_clock': 1756126208, u'oid': 26, u'value': 27648, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 233.030505213, u'next_clock': 1771246208, u'oid': 17, u'value': 30681, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 233.060569787, u'next_clock': 1773406208, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 232.092124546}
mcu 'mcu': got {'#receive_time': 233.12051025, u'next_clock': 1777726208, u'oid': 26, u'value': 27648, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.330605027, u'next_clock': 1792846208, u'oid': 17, u'value': 30680, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.360588323, u'next_clock': 1795006208, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.420521064, u'next_clock': 1799326208, u'oid': 26, u'value': 27652, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.630531805, u'next_clock': 1814446208, u'oid': 17, u'value': 30691, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.66051386, u'next_clock': 1816606208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.720505064, u'next_clock': 1820926208, u'oid': 26, u'value': 27644, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.93055686, u'next_clock': 1836046208, u'oid': 17, u'value': 30695, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 233.960547193, u'next_clock': 1838206208, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 234.020555379, u'next_clock': 1842526208, u'oid': 26, u'value': 27654, '#name': u'analog_in_state', '#sent_time': 233.07639762}
mcu 'mcu': got {'#receive_time': 234.230531341, u'next_clock': 1857646208, u'oid': 17, u'value': 30679, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.260561897, u'next_clock': 1859806208, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.320540119, u'next_clock': 1864126208, u'oid': 26, u'value': 27651, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.530586952, u'next_clock': 1879246208, u'oid': 17, u'value': 30681, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.560684304, u'next_clock': 1881406208, u'oid': 20, u'value': 14095, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.620557341, u'next_clock': 1885726208, u'oid': 26, u'value': 27659, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.83058386, u'next_clock': 1900846208, u'oid': 17, u'value': 30680, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.860603267, u'next_clock': 1903006208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 234.92055973, u'next_clock': 1907326208, u'oid': 26, u'value': 27669, '#name': u'analog_in_state', '#sent_time': 234.060551656}
mcu 'mcu': got {'#receive_time': 235.130606859, u'next_clock': 1922446208, u'oid': 17, u'value': 30692, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.160577433, u'next_clock': 1924606208, u'oid': 20, u'value': 14116, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.220576119, u'next_clock': 1928926208, u'oid': 26, u'value': 27672, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.431222081, u'next_clock': 1944046208, u'oid': 17, u'value': 30683, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.460793989, u'next_clock': 1946206208, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.5206126, u'next_clock': 1950526208, u'oid': 26, u'value': 27683, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.730652322, u'next_clock': 1965646208, u'oid': 17, u'value': 30680, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.760567489, u'next_clock': 1967806208, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 235.820563952, u'next_clock': 1972126208, u'oid': 26, u'value': 27690, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 236.030547266, u'next_clock': 1987246208, u'oid': 17, u'value': 30683, '#name': u'analog_in_state', '#sent_time': 235.045457545}
mcu 'mcu': got {'#receive_time': 236.060630637, u'next_clock': 1989406208, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.120606822, u'next_clock': 1993726208, u'oid': 26, u'value': 27696, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.33061534, u'next_clock': 2008846208, u'oid': 17, u'value': 30690, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.360583785, u'next_clock': 2011006208, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.420588303, u'next_clock': 2015326208, u'oid': 26, u'value': 27699, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.630631229, u'next_clock': 2030446208, u'oid': 17, u'value': 30688, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.660669136, u'next_clock': 2032606208, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.720627766, u'next_clock': 2036926208, u'oid': 26, u'value': 27707, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.930628099, u'next_clock': 2052046208, u'oid': 17, u'value': 30673, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 236.960625988, u'next_clock': 2054206208, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 236.030479822}
mcu 'mcu': got {'#receive_time': 237.020603895, u'next_clock': 2058526208, u'oid': 26, u'value': 27716, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.230634562, u'next_clock': 2073646208, u'oid': 17, u'value': 30696, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.260699284, u'next_clock': 2075806208, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.320748117, u'next_clock': 2080126208, u'oid': 26, u'value': 27731, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.530702747, u'next_clock': 2095246208, u'oid': 17, u'value': 30682, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.560640821, u'next_clock': 2097406208, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.620660784, u'next_clock': 2101726208, u'oid': 26, u'value': 27720, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.830665487, u'next_clock': 2116846208, u'oid': 17, u'value': 30684, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.860722802, u'next_clock': 2119006208, u'oid': 20, u'value': 14086, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 237.920689913, u'next_clock': 2123326208, u'oid': 26, u'value': 27734, '#name': u'analog_in_state', '#sent_time': 237.015547655}
mcu 'mcu': got {'#receive_time': 238.130706617, u'next_clock': 2138446208, u'oid': 17, u'value': 30702, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.160678209, u'next_clock': 2140606208, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.220680932, u'next_clock': 2144926208, u'oid': 26, u'value': 27765, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.430686765, u'next_clock': 2160046208L, u'oid': 17, u'value': 30687, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.460729154, u'next_clock': 2162206208L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.520758506, u'next_clock': 2166526208L, u'oid': 26, u'value': 27769, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.730697117, u'next_clock': 2181646208L, u'oid': 17, u'value': 30676, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.760715542, u'next_clock': 2183806208L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 238.820717765, u'next_clock': 2188126208L, u'oid': 26, u'value': 27779, '#name': u'analog_in_state', '#sent_time': 238.000453376}
mcu 'mcu': got {'#receive_time': 239.03067832, u'next_clock': 2203246208L, u'oid': 17, u'value': 30689, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.060716839, u'next_clock': 2205406208L, u'oid': 20, u'value': 14100, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.120729968, u'next_clock': 2209726208L, u'oid': 26, u'value': 27780, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.330797801, u'next_clock': 2224846208L, u'oid': 17, u'value': 30684, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.360807912, u'next_clock': 2227006208L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.420787672, u'next_clock': 2231326208L, u'oid': 26, u'value': 27775, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.630763949, u'next_clock': 2246446208L, u'oid': 17, u'value': 30695, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.660756635, u'next_clock': 2248606208L, u'oid': 20, u'value': 14117, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.720731468, u'next_clock': 2252926208L, u'oid': 26, u'value': 27812, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.930748264, u'next_clock': 2268046208L, u'oid': 17, u'value': 30685, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 239.960742468, u'next_clock': 2270206208L, u'oid': 20, u'value': 14108, '#name': u'analog_in_state', '#sent_time': 238.984597061}
mcu 'mcu': got {'#receive_time': 240.020746875, u'next_clock': 2274526208L, u'oid': 26, u'value': 27837, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.230780764, u'next_clock': 2289646208L, u'oid': 17, u'value': 30683, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.260836005, u'next_clock': 2291806208L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.320876542, u'next_clock': 2296126208L, u'oid': 26, u'value': 27854, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.53091769, u'next_clock': 2311246208L, u'oid': 17, u'value': 30685, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.560846375, u'next_clock': 2313406208L, u'oid': 20, u'value': 14120, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.620773208, u'next_clock': 2317726208L, u'oid': 26, u'value': 27862, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.830790838, u'next_clock': 2332846208L, u'oid': 17, u'value': 30682, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.860782282, u'next_clock': 2335006208L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 240.920799689, u'next_clock': 2339326208L, u'oid': 26, u'value': 27878, '#name': u'analog_in_state', '#sent_time': 239.96942582}
mcu 'mcu': got {'#receive_time': 241.130793282, u'next_clock': 2354446208L, u'oid': 17, u'value': 30676, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.160799782, u'next_clock': 2356606208L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.220804985, u'next_clock': 2360926208L, u'oid': 26, u'value': 27875, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.430898745, u'next_clock': 2376046208L, u'oid': 17, u'value': 30684, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.460955078, u'next_clock': 2378206208L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.520913819, u'next_clock': 2382526208L, u'oid': 26, u'value': 27903, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.73096443, u'next_clock': 2397646208L, u'oid': 17, u'value': 30696, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.760899855, u'next_clock': 2399806208L, u'oid': 20, u'value': 14113, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 241.820914726, u'next_clock': 2404126208L, u'oid': 26, u'value': 27909, '#name': u'analog_in_state', '#sent_time': 240.954244486}
mcu 'mcu': got {'#receive_time': 242.030898911, u'next_clock': 2419246208L, u'oid': 17, u'value': 30697, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.060923003, u'next_clock': 2421406208L, u'oid': 20, u'value': 14101, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.120951392, u'next_clock': 2425726208L, u'oid': 26, u'value': 27904, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.330939985, u'next_clock': 2440846208L, u'oid': 17, u'value': 30691, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.3609313, u'next_clock': 2443006208L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.420937559, u'next_clock': 2447326208L, u'oid': 26, u'value': 27904, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.631009022, u'next_clock': 2462446208L, u'oid': 17, u'value': 30689, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.660921762, u'next_clock': 2464606208L, u'oid': 20, u'value': 14104, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.72100917, u'next_clock': 2468926208L, u'oid': 26, u'value': 27902, '#name': u'analog_in_state', '#sent_time': 241.939160133}
mcu 'mcu': got {'#receive_time': 242.930947058, u'next_clock': 2484046208L, u'oid': 17, u'value': 30700, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 242.960973318, u'next_clock': 2486206208L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.020960614, u'next_clock': 2490526208L, u'oid': 26, u'value': 27922, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.230972762, u'next_clock': 2505646208L, u'oid': 17, u'value': 30692, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.261007818, u'next_clock': 2507806208L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.320969966, u'next_clock': 2512126208L, u'oid': 26, u'value': 27931, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.531094984, u'next_clock': 2527246208L, u'oid': 17, u'value': 30694, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.561013503, u'next_clock': 2529406208L, u'oid': 20, u'value': 14098, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.620950484, u'next_clock': 2533726208L, u'oid': 26, u'value': 27929, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.831005669, u'next_clock': 2548846208L, u'oid': 17, u'value': 30693, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.861017799, u'next_clock': 2551006208L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 242.924248058}
mcu 'mcu': got {'#receive_time': 243.920987669, u'next_clock': 2555326208L, u'oid': 26, u'value': 27945, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.131025243, u'next_clock': 2570446208L, u'oid': 17, u'value': 30703, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.161008206, u'next_clock': 2572606208L, u'oid': 20, u'value': 14102, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.221018965, u'next_clock': 2576926208L, u'oid': 26, u'value': 27928, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.43109478, u'next_clock': 2592046208L, u'oid': 17, u'value': 30698, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.461052187, u'next_clock': 2594206208L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.521071724, u'next_clock': 2598526208L, u'oid': 26, u'value': 27948, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.731034113, u'next_clock': 2613646208L, u'oid': 17, u'value': 30701, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.761164817, u'next_clock': 2615806208L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 244.821049557, u'next_clock': 2620126208L, u'oid': 26, u'value': 27947, '#name': u'analog_in_state', '#sent_time': 243.908440336}
mcu 'mcu': got {'#receive_time': 245.03106065, u'next_clock': 2635246208L, u'oid': 17, u'value': 30701, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.061060983, u'next_clock': 2637406208L, u'oid': 20, u'value': 14103, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.121050613, u'next_clock': 2641726208L, u'oid': 26, u'value': 27953, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.331091187, u'next_clock': 2656846208L, u'oid': 17, u'value': 30703, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.361069446, u'next_clock': 2659006208L, u'oid': 20, u'value': 14121, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.421161835, u'next_clock': 2663326208L, u'oid': 26, u'value': 27963, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.63107539, u'next_clock': 2678446208L, u'oid': 17, u'value': 30698, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.661100835, u'next_clock': 2680606208L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.721098668, u'next_clock': 2684926208L, u'oid': 26, u'value': 27972, '#name': u'analog_in_state', '#sent_time': 244.892556168}
mcu 'mcu': got {'#receive_time': 245.931098131, u'next_clock': 2700046208L, u'oid': 17, u'value': 30690, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 245.961120372, u'next_clock': 2702206208L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.021119501, u'next_clock': 2706526208L, u'oid': 26, u'value': 27983, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.231130464, u'next_clock': 2721646208L, u'oid': 17, u'value': 30695, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.26113739, u'next_clock': 2723806208L, u'oid': 20, u'value': 14096, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.321142131, u'next_clock': 2728126208L, u'oid': 26, u'value': 27993, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.531216742, u'next_clock': 2743246208L, u'oid': 17, u'value': 30696, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.561167149, u'next_clock': 2745406208L, u'oid': 20, u'value': 14099, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.621059279, u'next_clock': 2749726208L, u'oid': 26, u'value': 27991, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.831081797, u'next_clock': 2764846208L, u'oid': 17, u'value': 30695, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.861072427, u'next_clock': 2767006208L, u'oid': 20, u'value': 14092, '#name': u'analog_in_state', '#sent_time': 245.876741557}
mcu 'mcu': got {'#receive_time': 246.921074149, u'next_clock': 2771326208L, u'oid': 26, u'value': 27994, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.131093889, u'next_clock': 2786446208L, u'oid': 17, u'value': 30700, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.16108326, u'next_clock': 2788606208L, u'oid': 20, u'value': 14109, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.221088871, u'next_clock': 2792926208L, u'oid': 26, u'value': 28022, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.431294315, u'next_clock': 2808046208L, u'oid': 17, u'value': 30700, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.461187704, u'next_clock': 2810206208L, u'oid': 20, u'value': 14112, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.521225593, u'next_clock': 2814526208L, u'oid': 26, u'value': 28029, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.731207167, u'next_clock': 2829646208L, u'oid': 17, u'value': 30705, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.761204222, u'next_clock': 2831806208L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 247.821219778, u'next_clock': 2836126208L, u'oid': 26, u'value': 28015, '#name': u'analog_in_state', '#sent_time': 246.86149876}
mcu 'mcu': got {'#receive_time': 248.031218648, u'next_clock': 2851246208L, u'oid': 17, u'value': 30697, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.061226592, u'next_clock': 2853406208L, u'oid': 20, u'value': 14097, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.121233722, u'next_clock': 2857726208L, u'oid': 26, u'value': 28032, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.331247259, u'next_clock': 2872846208L, u'oid': 17, u'value': 30678, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.361293592, u'next_clock': 2875006208L, u'oid': 20, u'value': 14114, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.421230685, u'next_clock': 2879326208L, u'oid': 26, u'value': 28033, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.631232166, u'next_clock': 2894446208L, u'oid': 17, u'value': 30687, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.661321888, u'next_clock': 2896606208L, u'oid': 20, u'value': 14106, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.721257685, u'next_clock': 2900926208L, u'oid': 26, u'value': 28049, '#name': u'analog_in_state', '#sent_time': 247.845648611}
mcu 'mcu': got {'#receive_time': 248.931187481, u'next_clock': 2916046208L, u'oid': 17, u'value': 30704, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 248.961169073, u'next_clock': 2918206208L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.021171796, u'next_clock': 2922526208L, u'oid': 26, u'value': 28059, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.231192758, u'next_clock': 2937646208L, u'oid': 17, u'value': 30698, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.261185814, u'next_clock': 2939806208L, u'oid': 20, u'value': 14110, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.321198666, u'next_clock': 2944126208L, u'oid': 26, u'value': 28071, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.531308888, u'next_clock': 2959246208L, u'oid': 17, u'value': 30699, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.561220573, u'next_clock': 2961406208L, u'oid': 20, u'value': 14105, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.621214184, u'next_clock': 2965726208L, u'oid': 26, u'value': 28098, '#name': u'analog_in_state', '#sent_time': 248.830750277}
mcu 'mcu': got {'#receive_time': 249.831209777, u'next_clock': 2980846208L, u'oid': 17, u'value': 30703, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 249.861235832, u'next_clock': 2983006208L, u'oid': 20, u'value': 14123, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 249.921251943, u'next_clock': 2987326208L, u'oid': 26, u'value': 28088, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 250.131317888, u'next_clock': 3002446208L, u'oid': 17, u'value': 30695, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 250.161325813, u'next_clock': 3004606208L, u'oid': 20, u'value': 14111, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 250.221334036, u'next_clock': 3008926208L, u'oid': 26, u'value': 28100, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 250.431413073, u'next_clock': 3024046208L, u'oid': 17, u'value': 30704, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 250.461316276, u'next_clock': 3026206208L, u'oid': 20, u'value': 14107, '#name': u'analog_in_state', '#sent_time': 249.815397684}
mcu 'mcu': got {'#receive_time': 250.521360721, u'next_clock': 3030526208L, u'oid': 26, u'value': 28090, '#name': u'analog_in_state', '#sent_time': 249.815397684}
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-218-gf8afe49a'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 12:39:04 2021 (1640950744.7 26.0)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041508848: New connection
webhooks client 3041508848: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 28.2: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2439 bytes_read=5328 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4625 freq=71993257 heater_bed: target=0 temp=0.0 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=0.0  sysload=1.42 cputime=1.691 memavail=1678236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 3041508848
webhooks: registering remote method 'reboot_machine' for connection id: 3041508848
webhooks: registering remote method 'pause_job_queue' for connection id: 3041508848
webhooks: registering remote method 'start_job_queue' for connection id: 3041508848
Stats 29.2: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7613 bytes_read=5924 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.003 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71995068 heater_bed: target=0 temp=30.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.9  sysload=1.42 cputime=1.723 memavail=1676164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 30.2: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7673 bytes_read=6110 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71995814 heater_bed: target=0 temp=30.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.4  sysload=1.39 cputime=1.739 memavail=1673280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000
Stats 31.2: gcodein=0 mcu: mcu_awake=0.065 mcu_task_avg=0.000055 mcu_task_stddev=0.000142 bytes_write=7717 bytes_read=6288 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.001 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996603 heater_bed: target=0 temp=30.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.7  sysload=1.39 cputime=1.755 memavail=1659392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000
Stats 32.2: gcodein=0 mcu: mcu_awake=0.065 mcu_task_avg=0.000055 mcu_task_stddev=0.000142 bytes_write=7742 bytes_read=6474 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996758 heater_bed: target=0 temp=30.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.3  sysload=1.39 cputime=1.769 memavail=1653844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000
Stats 33.2: gcodein=0 mcu: mcu_awake=0.065 mcu_task_avg=0.000055 mcu_task_stddev=0.000142 bytes_write=7748 bytes_read=6640 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996690 heater_bed: target=0 temp=30.6 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=27.2  sysload=1.39 cputime=1.787 memavail=1653428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000
Stats 34.2: gcodein=0 mcu: mcu_awake=0.065 mcu_task_avg=0.000055 mcu_task_stddev=0.000142 bytes_write=7754 bytes_read=6791 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996651 heater_bed: target=0 temp=30.7 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=26.5  sysload=1.39 cputime=1.810 memavail=1653176 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.7 pwm=0.000
Stats 35.2: gcodein=0 mcu: mcu_awake=0.065 mcu_task_avg=0.000055 mcu_task_stddev=0.000142 bytes_write=7784 bytes_read=6982 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996655 heater_bed: target=0 temp=30.5 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=26.5  sysload=1.28 cputime=1.835 memavail=1652856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.5 pwm=0.000
Stats 36.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=7814 bytes_read=7172 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996654 heater_bed: target=0 temp=30.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.8  sysload=1.28 cputime=1.858 memavail=1651992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.8 pwm=0.000
Stats 37.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=7844 bytes_read=7333 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996617 heater_bed: target=0 temp=29.5 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.7  sysload=1.28 cputime=1.873 memavail=1651140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000
Stats 38.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=7850 bytes_read=7514 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996612 heater_bed: target=0 temp=30.6 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=26.5  sysload=1.28 cputime=1.897 memavail=1651240 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000
Stats 39.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=7856 bytes_read=7680 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996606 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=26.6  sysload=1.28 cputime=1.920 memavail=1651016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000
Stats 40.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=7862 bytes_read=7831 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996621 heater_bed: target=0 temp=30.4 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=26.4  sysload=1.17 cputime=1.944 memavail=1650764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000
Stats 41.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7868 bytes_read=8026 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996616 heater_bed: target=0 temp=29.7 pwm=0.000 rpi: temp=54.5 mcu_temp: temp=26.6  sysload=1.17 cputime=1.968 memavail=1650504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.5 pwm=0.000
Stats 42.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7874 bytes_read=8192 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996611 heater_bed: target=0 temp=30.3 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.8  sysload=1.17 cputime=1.992 memavail=1652704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.5 pwm=0.000
Stats 43.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7880 bytes_read=8343 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996574 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=27.0  sysload=1.17 cputime=2.003 memavail=1695220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.5 pwm=0.000
Stats 44.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7886 bytes_read=8524 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996607 heater_bed: target=0 temp=30.1 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=26.8  sysload=1.17 cputime=2.021 memavail=1694960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.4 pwm=0.000
Stats 45.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7916 bytes_read=8700 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996591 heater_bed: target=0 temp=29.9 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=27.0  sysload=1.08 cputime=2.045 memavail=1694976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.5 pwm=0.000
Stats 46.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7922 bytes_read=8865 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996587 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=53.6 mcu_temp: temp=26.3  sysload=1.08 cputime=2.068 memavail=1695468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.4 pwm=0.000
Stats 47.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7928 bytes_read=9046 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996611 heater_bed: target=0 temp=30.0 pwm=0.000 rpi: temp=55.5 mcu_temp: temp=26.5  sysload=1.08 cputime=2.092 memavail=1695164 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.3 pwm=0.000
Stats 48.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7934 bytes_read=9212 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996598 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=55.0 mcu_temp: temp=27.0  sysload=1.08 cputime=2.115 memavail=1692696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.2 pwm=0.000
Stats 49.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7940 bytes_read=9363 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996610 heater_bed: target=0 temp=29.7 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=26.8  sysload=1.08 cputime=2.129 memavail=1671444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.0 pwm=0.000
Stats 50.2: gcodein=0 mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=7946 bytes_read=9536 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=71996597 heater_bed: target=0 temp=30.2 pwm=0.000 rpi: temp=56.0 mcu_temp: temp=26.6  sysload=1.07 cputime=2.144 memavail=1668604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.1 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-218-gf8afe49a'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 12:44:59 2021 (1640951099.0 19.2)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041320232: New connection
webhooks client 3041320232: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
mcu 'mcu': got {'#receive_time': 20.790122895, u'next_clock': 1062436224, u'oid': 17, u'value': 31203, '#name': u'analog_in_state', '#sent_time': 20.73893258}
mcu 'mcu': got {'#receive_time': 20.820136117, u'next_clock': 1064596224, u'oid': 20, u'value': 14127, '#name': u'analog_in_state', '#sent_time': 20.790189858}
mcu 'mcu': got {'#receive_time': 20.88012845, u'next_clock': 1068916224, u'oid': 26, u'value': 31222, '#name': u'analog_in_state', '#sent_time': 20.841560543}
mcu 'mcu': got {'#receive_time': 21.090192302, u'next_clock': 1084036224, u'oid': 17, u'value': 31206, '#name': u'analog_in_state', '#sent_time': 21.045126265}
mcu 'mcu': got {'#receive_time': 21.12018408, u'next_clock': 1086196224, u'oid': 20, u'value': 14134, '#name': u'analog_in_state', '#sent_time': 21.096481746}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3041320232
webhooks: registering remote method 'reboot_machine' for connection id: 3041320232
webhooks: registering remote method 'pause_job_queue' for connection id: 3041320232
webhooks: registering remote method 'start_job_queue' for connection id: 3041320232
webhooks client 3041320232: Disconnected
webhooks client 3042112536: New connection
webhooks client 3042112536: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3042112536
webhooks: registering remote method 'reboot_machine' for connection id: 3042112536
webhooks: registering remote method 'pause_job_queue' for connection id: 3042112536
webhooks: registering remote method 'start_job_queue' for connection id: 3042112536
webhooks client 3042112536: Disconnected
webhooks client 3044542024: New connection
webhooks client 3044542024: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3044542024
webhooks: registering remote method 'reboot_machine' for connection id: 3044542024
webhooks: registering remote method 'pause_job_queue' for connection id: 3044542024
webhooks: registering remote method 'start_job_queue' for connection id: 3044542024
webhooks client 3044542024: Disconnected
webhooks client 3044273848: New connection
webhooks client 3044273848: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3044273848
webhooks: registering remote method 'reboot_machine' for connection id: 3044273848
webhooks: registering remote method 'pause_job_queue' for connection id: 3044273848
webhooks: registering remote method 'start_job_queue' for connection id: 3044273848
webhooks client 3044273848: Disconnected
webhooks client 3044891424: New connection
webhooks client 3044891424: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3044891424
webhooks: registering remote method 'reboot_machine' for connection id: 3044891424
webhooks: registering remote method 'pause_job_queue' for connection id: 3044891424
webhooks: registering remote method 'start_job_queue' for connection id: 3044891424
webhooks client 3044891424: Disconnected
webhooks client 3041320072: New connection
webhooks client 3041320072: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3041320072
webhooks: registering remote method 'reboot_machine' for connection id: 3041320072
webhooks: registering remote method 'pause_job_queue' for connection id: 3041320072
webhooks: registering remote method 'start_job_queue' for connection id: 3041320072
webhooks client 3041320072: Disconnected
webhooks client 3041319312: New connection
webhooks client 3041319312: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3041319312
webhooks: registering remote method 'reboot_machine' for connection id: 3041319312
webhooks: registering remote method 'pause_job_queue' for connection id: 3041319312
webhooks: registering remote method 'start_job_queue' for connection id: 3041319312
webhooks client 3041319312: Disconnected
webhooks client 3044200536: New connection
webhooks client 3044200536: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3044200536
webhooks: registering remote method 'reboot_machine' for connection id: 3044200536
webhooks: registering remote method 'pause_job_queue' for connection id: 3044200536
webhooks: registering remote method 'start_job_queue' for connection id: 3044200536
webhooks client 3044200536: Disconnected
webhooks client 3042039488: New connection
webhooks client 3042039488: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3042039488
webhooks: registering remote method 'reboot_machine' for connection id: 3042039488
webhooks: registering remote method 'pause_job_queue' for connection id: 3042039488
webhooks: registering remote method 'start_job_queue' for connection id: 3042039488
webhooks client 3042039488: Disconnected
webhooks client 3044203976: New connection
webhooks client 3044203976: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3044203976
webhooks: registering remote method 'reboot_machine' for connection id: 3044203976
webhooks: registering remote method 'pause_job_queue' for connection id: 3044203976
webhooks: registering remote method 'start_job_queue' for connection id: 3044203976
webhooks client 3044203976: Disconnected
webhooks client 3041971536: New connection
webhooks client 3041971536: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3041971536
webhooks: registering remote method 'reboot_machine' for connection id: 3041971536
webhooks: registering remote method 'pause_job_queue' for connection id: 3041971536
webhooks: registering remote method 'start_job_queue' for connection id: 3041971536
webhooks client 3041971536: Disconnected
webhooks client 3041970896: New connection
webhooks client 3041970896: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
webhooks: registering remote method 'shutdown_machine' for connection id: 3041970896
webhooks: registering remote method 'reboot_machine' for connection id: 3041970896
webhooks: registering remote method 'pause_job_queue' for connection id: 3041970896
webhooks: registering remote method 'start_job_queue' for connection id: 3041970896
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-218-gf8afe49a'
CPU: 4 core ARMv7 Processor rev 3 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Fri Dec 31 14:20:23 2021 (1640956823.8 25.9)
===== Config file =====
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
endstop_pin = ^!PC0
position_endstop = 0
position_max = 200
homing_speed = 50
rotation_distance = 40.1728
microsteps = 16

[tmc2209 stepper_x]
uart_pin = PB15
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
endstop_pin = ^!PC1
position_endstop = 0
position_max = 260
homing_speed = 50
microsteps = 16
rotation_distance = 40.1024

[tmc2209 stepper_y]
uart_pin = PC6
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 999999

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
endstop_pin = probe:z_virtual_endstop
position_max = 190
position_min = -0.1
microsteps = 16
rotation_distance = 8.0416

[bltouch]
sensor_pin = ^PC2
control_pin = PA1
pin_up_reports_not_triggered = False
pin_up_touch_mode_reports_triggered = False
x_offset = -30
y_offset = 0
z_offset = 4.07
pin_move_time = 1.0
samples = 2
sample_retract_dist = 4.0
samples_tolerance = 0.050
samples_tolerance_retries = 1

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 5,15
mesh_max = 170,250
probe_count = 4,4
mesh_pps = 2,3
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 35,15
screw1_name = front left screw
screw2 = 200,15
screw2_name = front right screw
screw3 = 200,250
screw3_name = rear right screw
screw4 = 35,250
screw4_name = rear left screw
horizontal_move_z = 10
speed = 50
screw_thread = CW-M4

[tmc2209 stepper_z]
uart_pin = PC10
run_current = 0.580
hold_current = 0.500
stealthchop_threshold = 5

[safe_z_home]
home_xy_position = 100,130
speed = 50
z_hop = 10
z_hop_speed = 5

[extruder]
step_pin = PB3
dir_pin = !PB4
enable_pin = !PD2
rotation_distance = 32.4544
microsteps = 16
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 250
control = pid
pid_kp = 22.042
pid_ki = 0.826
pid_kd = 147.128

[tmc2209 extruder]
uart_pin = PC11
run_current = 0.650
hold_current = 0.500
stealthchop_threshold = 5

[heater_bed]
heater_pin = PC9
sensor_type = ATC Semitec 104GT-2
sensor_pin = PC3
min_temp = 0
max_temp = 130
control = pid
pid_kp = 64.529
pid_ki = 1.320
pid_kd = 788.866

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f103xe_35FFDA05524E343526810743-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 1200
max_z_velocity = 5
max_z_accel = 100

[static_digital_output usb_pullup_enable]
pins = !PC13

[board_pins]
aliases = 
	EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>

[temperature_sensor rpi]
sensor_type = temperature_host
min_temp = -40
max_temp = 85

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[virtual_sdcard]
path = ~/gcode_files

[display_status]

[pause_resume]

[display]
lcd_type = emulated_st7920
en_pin = PB8
spi_software_sclk_pin = PB9
spi_software_mosi_pin = PB7
encoder_pins = ^PA9, ^PA10
click_pin = ^!PB6
spi_software_miso_pin = PA2

[output_pin beeper]
pin = PB5

[gcode_macro PAUSA]
gcode = 
	{% set X = params.X|default(0)|float %}
	{% set Y = params.Y|default(0)|float %}
	{% set Z = params.Z|default(10)|float %}
	{% set E = params.E|default(1)|float %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{E} F2100
	G1 Z{Z}
	G90
	G1 X{X} Y{Y} F6000

[gcode_macro RIPRENDI]
gcode = 
	{% set E = params.E|default(1)|float %}
	G91
	G1 E{E} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="wifi_switch",
	state="off")}

[gcode_macro RESET_PROBE]
gcode = 
	BLTOUCH_DEBUG COMMAND=reset

[gcode_macro ADJUST_SCREWS]
gcode = 
	G28
	SCREWS_TILT_CALCULATE

[gcode_macro PROGRAM_START]
gcode = 
	G90 ; use absolute coordinates
	G28 ; home all
	G1 Z2 F240
	G1 X2 Y10 F3000
	G1 Z0.28 F240
	G92 E0.0
	G1 Y190 E15.0 F1500.0 ; intro line
	G1 X2.3 F5000
	G1 Y75 E30 F1200.0 ; intro line
	G92 E0.0

[gcode_macro PROGRAM_END]
gcode = 
	M104 S0 ; turn off temperature
	M140 S0 ; turn off heatbed
	M107 ; turn off fan
	G91
	G1 Z10 F3000
	G90
	G1 X0 Y230 F3000 ; present print
	M84 X Y E ; disable motors

[bed_mesh default]
version = 1
points = 
	-0.050260, -0.190988, -0.219887, -0.189731
	-0.124393, -0.159575, -0.216118, -0.185962
	-0.015078, -0.118111, -0.099263, -0.178423
	-0.017591, -0.123137, -0.168371, -0.180936
tension = 0.2
min_x = 5.0
algo = bicubic
y_count = 4
mesh_y_pps = 3
min_y = 14.99
x_count = 4
max_y = 249.99
mesh_x_pps = 2
max_x = 170.01
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 3041607072: New connection
webhooks client 3041607072: Client info {'program': 'Moonraker', 'version': 'v0.7.1-280-g9d7baa1'}
mcu 'mcu': got {'#receive_time': 27.498206187, u'next_clock': 895175808, u'oid': 17, u'value': 31504, '#name': u'analog_in_state', '#sent_time': 27.453798761}
mcu 'mcu': got {'#receive_time': 27.528234205, u'next_clock': 897335808, u'oid': 20, u'value': 14133, '#name': u'analog_in_state', '#sent_time': 27.505632167999998}
mcu 'mcu': got {'#receive_time': 27.588244502, u'next_clock': 901655808, u'oid': 26, u'value': 31679, '#name': u'analog_in_state', '#sent_time': 27.557403483}
mcu 'mcu': got {'#receive_time': 27.798228705, u'next_clock': 916775808, u'oid': 17, u'value': 31509, '#name': u'analog_in_state', '#sent_time': 27.761032335}
mcu 'mcu': got {'#receive_time': 27.828219631, u'next_clock': 918935808, u'oid': 20, u'value': 14130, '#name': u'analog_in_state', '#sent_time': 27.812062261}
Loaded MCU 'mcu' 94 commands (v0.10.0-130-g68c92991 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_spi3=PB4,PB5,PB3 INITIAL_PINS=!PC13 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 PWM_MAX=255 CLOCK_FREQ=72000000 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_USB=PA11,PA12 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (35.0, 15.0)    | (5.0, 15.0)
  1   | (90.0, 15.0)    | (60.0, 15.0)
  2   | (145.0, 15.0)   | (115.0, 15.0)
  3   | (200.0, 15.0)   | (170.0, 15.0)
  4   | (200.0, 93.3)   | (170.0, 93.3)
  5   | (145.0, 93.3)   | (115.0, 93.3)
  6   | (90.0, 93.3)    | (60.0, 93.3)
  7   | (35.0, 93.3)    | (5.0, 93.3)
  8   | (35.0, 171.7)   | (5.0, 171.7)
  9   | (90.0, 171.7)   | (60.0, 171.7)
  10  | (145.0, 171.7)  | (115.0, 171.7)
  11  | (200.0, 171.7)  | (170.0, 171.7)
  12  | (200.0, 250.0)  | (170.0, 250.0)
  13  | (145.0, 250.0)  | (115.0, 250.0)
  14  | (90.0, 250.0)   | (60.0, 250.0)
  15  | (35.0, 250.0)   | (5.0, 250.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3041607072
webhooks: registering remote method 'reboot_machine' for connection id: 3041607072
webhooks: registering remote method 'pause_job_queue' for connection id: 3041607072
webhooks: registering remote method 'start_job_queue' for connection id: 3041607072