[ 0.001415@0]- ftrace: allocating 42179 entries in 165 pages [ 0.076508@0]- sched-energy: Sched-energy-costs installed from DT [ 0.088158@0]- ASID allocator initialised with 65536 entries [ 0.126871@0]- secmon: clear_range:5100000 200000 [ 0.172757@1]d Detected VIPT I-cache on CPU1 [ 0.172805@1]d CPU1: Booted secondary processor [410fd034] [ 0.205280@2]d Detected VIPT I-cache on CPU2 [ 0.205321@2]d CPU2: Booted secondary processor [410fd092] [ 0.236829@3]d Detected VIPT I-cache on CPU3 [ 0.236851@3]d CPU3: Booted secondary processor [410fd092] [ 0.268886@4]d Detected VIPT I-cache on CPU4 [ 0.268907@4]d CPU4: Booted secondary processor [410fd092] [ 0.300947@5]d Detected VIPT I-cache on CPU5 [ 0.300969@5]d CPU5: Booted secondary processor [410fd092] [ 0.301052@0]- Brought up 6 CPUs [ 0.301058@0]- SMP: Total of 6 processors activated. [ 0.301064@0]- CPU features: detected feature: 32-bit EL0 Support [ 0.301185@0]- CPU: All CPU(s) started at EL2 [ 0.301221@0]d alternatives: patching kernel code [ 0.302675@4]- devtmpfs: initialized [ 0.310386@4]- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.310396@4]- futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.310499@4]- pinctrl core: initialized pinctrl subsystem [ 0.311212@4]- NET: Registered protocol family 16 [ 0.311573@4]- schedtune: init normalization constants... [ 0.311579@4]- schedtune: CLUSTER[0-1] min_pwr: 0 max_pwr: 42 [ 0.311582@4]- schedtune: CPU[0] min_pwr: 0 max_pwr: 279 [ 0.311585@4]- schedtune: CPU[1] min_pwr: 0 max_pwr: 279 [ 0.311589@4]- schedtune: CLUSTER[2-5] min_pwr: 0 max_pwr: 64 [ 0.311591@4]- schedtune: CPU[2] min_pwr: 0 max_pwr: 759 [ 0.311594@4]- schedtune: CPU[3] min_pwr: 0 max_pwr: 759 [ 0.311597@4]- schedtune: CPU[4] min_pwr: 0 max_pwr: 759 [ 0.311599@4]- schedtune: CPU[5] min_pwr: 0 max_pwr: 759 [ 0.311601@4]- schedtune: SYSTEM min_pwr: 0 max_pwr: 3700 [ 0.311604@4]- schedtune: using normalization constants mul: 459677581 sh1: 1 sh2: 11 [ 0.311605@4]- schedtune: verify normalization constants... [ 0.311608@4]- schedtune: max_pwr/2^0: 3700 => norm_pwr: 1024 [ 0.311610@4]- schedtune: max_pwr/2^1: 1850 => norm_pwr: 512 [ 0.311612@4]- schedtune: max_pwr/2^2: 925 => norm_pwr: 256 [ 0.311614@4]- schedtune: max_pwr/2^3: 462 => norm_pwr: 127 [ 0.311615@4]- schedtune: max_pwr/2^4: 231 => norm_pwr: 63 [ 0.311617@4]- schedtune: max_pwr/2^5: 115 => norm_pwr: 31 [ 0.311618@4]- schedtune: configured to support global boosting only [ 0.324989@0]- cpuidle: using governor menu [ 0.325126@0]- register canvas platform driver [ 0.325160@0]- register rdma platform driver [ 0.325700@0]- vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.325714@0]- hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.327184@0]- DMA: preallocated 2048 KiB pool for atomic allocations [ 0.327371@0]- clkmsr: clkmsr: driver init [ 0.327373@0]- codec_mm_module_init [ 0.327415@0]- media_configs_system_init [ 0.327864@0]- pstore: using zlib compression [ 0.327927@0]- console [pstore-1] enabled [ 0.327930@0]- pstore: Registered ramoops as persistent store backend [ 0.327933@0]- ramoops: attached 0x100000@0x7400000, ecc: 0/0 [ 0.329614@0]- meson_mhu: mhu ffffffc0dd224810 to scp done 0x1 [ 0.329767@0]- aml_iomap: amlogic iomap probe done [ 0.330161@0]- vpu: driver version: v20210916(8-g12b) [ 0.330168@0]- vpu: load vpu_clk: 666666667Hz(7) [ 0.330333@0]- vpu: clktree_init [ 0.330386@0]- vpu: vpu_probe OK [ 0.334787@0]- clkmsr: msr_clk_reg0= (ptrval),msr_clk_reg2= (ptrval) [ 0.334797@0]- clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.337471@0]- audio_clocks: audio_clocks_probe done [ 0.339887@0]- aml_vdac_config_probe: cpu_id:4, name:meson-g12ab-vdac [ 0.340078@0]- aml_vdac_probe: ok [ 0.340247@0]- canvas_probe reg= (ptrval),size=2000 [ 0.340262@0]- canvas maped reg_base = (ptrval) [ 0.342394@0]- rdma_probe,cpu_type:0, ver:0, len:8,rdma_table_size:65536 [ 0.342643@0]- rdma_register, rdma_table_addr (ptrval) rdma_table_addr_phy e2600000 reg_buf (ptrval) [ 0.342648@0]- rdma_register success, handle 1 table_size 65536 [ 0.342651@0]- set_rdma_handle video rdma handle = 1. [ 0.342692@0]- classs created ok [ 0.342701@0]- classs file created ok [ 0.343735@0]- aml_snd_reg_map[0], reg:ff640000, size:2000 [ 0.343747@0]- aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.343755@0]- aml_snd_reg_map[2], reg:ff64a000, size:2000 [ 0.343763@0]- aml_snd_reg_map[3], reg:ff656000, size:1800 [ 0.343772@0]- aml_snd_reg_map[4], reg:ffd01000, size:1000 [ 0.343774@0]- amlogic auge_snd_iomap probe done [ 0.346188@0]- cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12b-cvbsout [ 0.346316@0]- cvbs_out: clk path:0x0 [ 0.346321@0]- cvbs_out: find performance_pal config [ 0.346329@0]- cvbs_out: register cvbs module server ok [ 0.346332@0]- cvbs_out: register cvbs module vout2 server ok [ 0.346336@0]- cvbs_out: chrdev devno 264241152 for disp [ 0.346548@0]- cvbs_out: create cdev cvbs [ 0.346552@0]- cvbs_out: cvbsout_probe OK [ 0.346839@0]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.346935@0]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.346938@0]- codec_mm_probe ok [ 0.494828@2]- SCSI subsystem initialized [ 0.494973@2]- libata version 3.00 loaded. [ 0.495128@2]- usbcore: registered new interface driver usbfs [ 0.495161@2]- usbcore: registered new interface driver hub [ 0.495188@2]- usbcore: registered new device driver usb [ 0.495266@2]- pps_core: LinuxPPS API ver. 1 registered [ 0.495268@2]- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.495286@2]- PTP clock support registered [ 0.495627@2]- secmon: reserve_mem_size:0x300000 [ 0.495689@2]- secmon secmon: assigned reserved memory node linux,secmon [ 0.495846@2]- secmon: get page: (ptrval), 5000 [ 0.495850@2]- secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.495852@2]- secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.495984@2]- fb: osd_init_module [ 0.496246@2]- fb: viu vsync irq: 34 [ 0.496256@2]- fb: viu2 vsync irq: 47 [ 0.496263@2]- fb: rdma irq: 46 [ 0.496439@2]- fb: osd_rdma_init: rdma_table p=0xe2610000,op=0xe2610000 , v=0x (ptrval) [ 0.496462@2]- rdma_register, rdma_table_addr (ptrval) rdma_table_addr_phy e2611000 reg_buf (ptrval) [ 0.496465@2]- rdma_register success, handle 2 table_size 4096 [ 0.496467@2]- fb: osd_rdma_init:osd rdma handle = 2. [ 0.496475@2]- fb: mem_size: 0x800000 [ 0.496477@2]- fb: mem_size: 0x4b80000 [ 0.496478@2]- fb: mem_size: 0x100000 [ 0.496479@2]- fb: mem_size: 0x100000 [ 0.496481@2]- fb: mem_size: 0x800000 [ 0.496513@2]- meson-fb meson-fb: assigned reserved memory node linux,meson-fb [ 0.496516@2]- fb: reserved memory base:0x0000000077800000, size:800000 [ 0.496604@2]- fb: init fbdev bpp is:32 [ 0.497357@2]- fb: set osd0 reverse as NONE [ 0.505622@2]- fb: osd probe OK [ 0.506093@2]- hdmitx: system: Ver: 20210902 [ 0.506184@2]- hdmitx: system: hpd irq = 33, viu1_vsync = 34 [ 0.506590@2]d vpu: switch_vpu_mem_pd: unsupport vpu mod: 63 [ 0.506593@2]- hdmitx: hw: alread display in uboot 0x10 [ 0.506619@2]- hdmitx: hw: avmute set to 1 [ 0.506659@2]- hdmitx: hdmitx_uboot_audio_en[604] data = 0xf [ 0.507902@2]- hdmitx: hdmitx_set_current_vmode[5442] [ 0.507906@2]- hdmitx: system: recalc before 1080p50hz 50 1, frac 0 [ 0.507910@2]- hdmitx: system: recalc after 1080p50hz 50 1, frac 0 [ 0.507912@2]- hdmitx: alread display in uboot [ 0.507914@2]- hdmitx: system: update rx hdr info 0 [ 0.507917@2]- vout: init mode 1080p50hz set ok [ 0.507919@2]- fb: current vmode=1080p50hz, cmd: 0x60000 [ 0.507921@2]- vout: aml_vout_probe OK [ 0.508147@2]- chip type:0x29 [ 0.508167@2]- can't find sec_base, set bytes_per_cycle to 16 [ 0.508428@2]- Advanced Linux Sound Architecture Driver Initialized. [ 0.509036@2]- NetLabel: Initializing [ 0.509039@2]- NetLabel: domain hash size = 128 [ 0.509040@2]- NetLabel: protocols = UNLABELED CIPSOv4 [ 0.509070@2]- NetLabel: unlabeled traffic allowed by default [ 0.509620@2]- clocksource: Switched to clocksource arch_sys_counter [ 0.542319@2]- VFS: Disk quotas dquot_6.6.0 [ 0.542359@2]- VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.542417@2]- FS-Cache: Loaded [ 0.548354@2]- NET: Registered protocol family 2 [ 0.565672@2]- TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.565811@2]- TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.565997@2]- TCP: Hash tables configured (established 32768 bind 32768) [ 0.566042@2]- UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.566074@2]- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.566196@2]- NET: Registered protocol family 1 [ 0.566402@2]- RPC: Registered named UNIX socket transport module. [ 0.566405@2]- RPC: Registered udp transport module. [ 0.566406@2]- RPC: Registered tcp transport module. [ 0.566409@2]- RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.566414@2]- PCI: CLS 0 bytes, default 64 [ 0.567651@2]- Unpacking initramfs... [ 0.584414@2]- Freeing initrd memory: 7188K [ 0.584840@2]- efusekeynum: 1 [ 0.584860@2]- efusekeyname: uuid offset: 0 size: 32 [ 0.585083@1]- efuse efuse: probe OK! [ 0.585923@1]- unifykey: aml_unifykeys_init done! [ 0.586463@1]- hw perfevents: clusterb_enabled = 1 [ 0.586468@1]- hw perfevents: cpumasks 0x3, 0x3c [ 0.586489@1]- hw perfevents: cluster A irq = 10 [ 0.586517@1]- hw perfevents: cluster B irq = 11 [ 0.586571@1]- hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.588994@1]- audit: initializing netlink subsys (disabled) [ 0.589053@1]- audit: type=2000 audit(0.536:1): initialized [ 0.589884@5]- workingset: timestamp_bits=45 max_order=20 bucket_order=0 [ 0.595298@5]- squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.595719@5]- FS-Cache: Netfs 'nfs' registered for caching [ 0.596140@5]- NFS: Registering the id_resolver key type [ 0.596154@5]- Key type id_resolver registered [ 0.596156@5]- Key type id_legacy registered [ 0.596163@5]- nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.596165@5]- nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.596291@5]- FS-Cache: Netfs 'cifs' registered for caching [ 0.596766@5]- SELinux: Registering netfilter hooks [ 0.599278@5]- NET: Registered protocol family 38 [ 0.599284@5]- Key type asymmetric registered [ 0.599287@5]- Asymmetric key parser 'x509' registered [ 0.599400@5]- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.599404@5]- io scheduler noop registered (default) [ 0.599406@5]- io scheduler deadline registered [ 0.599493@5]- io scheduler cfq registered [ 0.601191@2]d random: fast init done [ 0.601222@2]- random: crng init done [ 0.601247@5]- [drm] Initialized [ 0.601349@5]- Unable to detect cache hierarchy for CPU 0 [ 0.604335@5]- loop: module loaded [ 0.605201@5]- mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.605651@5]- libphy: Fixed MDIO Bus: probed [ 0.606150@5]- tx_amp_src not setup [ 0.606156@5]- no rst_mask setting [ 0.606157@5]- default enet type as 0 [ 0.606160@5]- read auto_cali_idx fail [ 0.606163@5]- Not set cali_val for REG1 [ 0.606474@5]- meson6-dwmac ff3f0000.ethernet: no reset control found [ 0.606478@5]- stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 0.606479@5]- Ring mode enabled [ 0.606481@5]- DMA HW capability register supported [ 0.606483@5]- Normal descriptors [ 0.606485@5]- RX Checksum Offload Engine supported [ 0.606486@5]- COE Type 2 [ 0.606487@5]- TX Checksum insertion supported [ 0.606489@5]- Wake-Up On Lan supported [ 0.606514@5]- eth%d: device MAC address 00:1e:06:42:2f:68 [ 0.606515@5]- Enable RX Mitigation via HW Watchdog Timer [ 0.609463@5]- libphy: stmmac: probed [ 0.609468@5]- eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.609471@5]- eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.610472@5]- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.610474@5]- ehci-pci: EHCI PCI platform driver [ 0.610508@5]- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.610520@5]- ohci-pci: OHCI PCI platform driver [ 0.610812@5]- usbcore: registered new interface driver cdc_acm [ 0.610814@5]- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.610850@5]- usbcore: registered new interface driver usb-storage [ 0.610909@5]- usbcore: registered new interface driver usbserial [ 0.610935@5]- usbcore: registered new interface driver usbserial_generic [ 0.610953@5]- usbserial: USB Serial support registered for generic [ 0.611176@5]- mousedev: PS/2 mouse device common for all mice [ 0.611416@5]- i2c /dev entries driver [ 0.612225@5]- ledtrig-cpu: registered to indicate activity on CPUs [ 0.612446@5]- hidraw: raw HID events driver (C) Jiri Kosina [ 0.612594@5]- usbcore: registered new interface driver usbhid [ 0.612595@5]- usbhid: USB HID core driver [ 0.612693@5]- cluster0 stock freq set to: 1896000 [ 0.612698@5]- cluster1 stock freq set to: 1800000 [ 0.612924@5]- meson_cpufreq_init: ignor dsu clk! [ 0.612927@5]- meson_cpufreq_init: ignor dsu pre parent clk! [ 0.612959@5]- value of voltage_tolerance 0 [ 0.612961@5]- meson_cpufreq_init:don't find the node [ 0.612978@5]- value of gp1_clk_target 0 [ 0.613456@5]- dvfs [meson_cpufreq_init] - cluster 0 freq 1992000 [ 0.613465@5]- cpu cpu0: meson_cpufreq_init: CPU 0 initialized [ 0.614953@5]- meson_cpufreq_init: ignor dsu clk! [ 0.614956@5]- meson_cpufreq_init: ignor dsu pre parent clk! [ 0.615000@5]- value of voltage_tolerance 0 [ 0.615003@5]- meson_cpufreq_init:don't find the node [ 0.615015@5]- value of gp1_clk_target 0 [ 0.615492@5]- dvfs [meson_cpufreq_init] - cluster 1 freq 1908000 [ 0.615494@5]- dvfs [meson_cpufreq_init] - cluster 1 freq 2004000 [ 0.615500@5]- cpu cpu2: meson_cpufreq_init: CPU 2 initialized [ 0.616928@5]- ff803000.serial: clock gate not found [ 0.616955@5]- meson_uart ff803000.serial: ==uart0 reg addr = 0000000068f587f2 [ 0.616975@5]- ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 25, base_baud = 1500000) is a meson_uart [ 0.616983@5]- meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200 [ 0.636985@2]d hdmitx: edid: EDID Parser: [ 0.636996@2]d hdmitx: edid: get dtd0 vic: 5 [ 0.636998@2]d hdmitx: edid: get dtd1 vic: 20 [ 0.637002@2]d hdmitx: edid: get dtd2 vic: 97 [ 0.637003@2]d hdmitx: edid: get dtd3 vic: 16 [ 0.637004@2]d hdmitx: hdmitx: get PMT vic: 97 [ 0.637006@2]d hdmitx: edid: find IEEEOUT [ 0.637011@2]- hdmitx: edid: blk0 raw data [ 0.637027@2]- hdmitx: edid: [ 0.637027@2]- 00ffffffffffff00412f00000101010100160103807341780acf74a3574cb023 [ 0.637027@2]- 09484c21080081c0814081800101010101010101010108e80030f2705a80b058 [ 0.637027@2]- 8a00ba882100001e023a801871382d40582c4500501d7400001e000000fd0018 [ 0.637027@2]- 4b0f883c000a202020202020000000fc005653582d3532380a20202020200101 [ 0.637027@2]- [ 0.637027@2]- [ 0.637028@2]- hdmitx: edid: blk1 raw data [ 0.637043@2]- hdmitx: edid: [ 0.637043@2]- 02033f714e01020405101113141f202122120338097f070f7f071507503e1ec0 [ 0.637043@2]- 492a005706005f7e01677f00834f000067030c0035008807e200f9e305000001 [ 0.637043@2]- 1d8018711c1620582c2500c48e2100009e011d80d0721c1620102c2580c48e21 [ 0.637043@2]- 00009e0000000000000000000000000000000000000000000000000000000074 [ 0.637043@2]- [ 0.637043@2]- [ 0.637045@2]- hdmitx: system: update rx hdr info 0 [ 0.637152@2]- hdmitx: hdmitx: get vic 16 cscd [ 0.637154@2]- hdmitx: hdmitx: mode name 1920x1080p60hz [ 0.637161@2]- hdmitx: hdmitx: tmds clock 148 [ 0.637162@2]- hdmitx: hdmitx: act clock: 148 [ 0.637171@0]h hdmitx: system: irq 80000002 0 [ 0.706194@5]- console [ttyS0] enabled [ 0.706707@5]- amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80084d9000 [ 0.706855@5]- amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80084dd080 [ 0.711754@5]- rtc rtc0: invalid alarm value: 2022-2-27 24:8:0 [ 0.711820@5]- rtc-pcf8563 3-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 0.713327@5]- gpio-keypad: probe of ff800000.gpio_keypad failed with error -22 [ 0.714146@5]- ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev [ 0.714158@5]- ion-dev: failed get fb memory [ 0.714166@5]- ion-dev: failed get secure memory [ 0.714292@5]- ion-dev: add heap type:0 id:0 [ 0.714322@5]- ion-dev: add heap type:5 id:5 [ 0.714337@5]- ion-dev: add heap type:4 id:4 [ 0.714338@5]- ion-dev: dev_ion_probe, create 3 heaps [ 0.714391@5]- ge2d: ge2d_init_module [ 0.714658@5]- ge2d: ge2d clock is 499 MHZ [ 0.714669@5]- ge2d: reserved mem is not used [ 0.714688@5]- ge2d: ge2d start monitor [ 0.714907@5]- new arch is :0. [ 0.714951@5]- [tsync_pcr_init]init success. [ 0.715051@5]- amvideom vsync irq: 34, cpu_type:1 [ 0.715067@5]- create_ge2d_work_queue video task ok [ 0.715344@5]- create_video_receiver video_render.0 000000008e0e815d, path_id:2 success [ 0.715346@5]- create_video_receiver video_render.1 000000006fdd5d9a, path_id:3 success [ 0.715454@5]- amvideocap_probe,amvideocap [ 0.715479@5]- use cma buf. [ 0.716753@5]- hdmitx: hdcp: hdmitx_hdcp_init [ 0.717086@5]- vout: vout2: clktree_init [ 0.717131@5]- vout: vout2: init mode null set ok [ 0.717132@5]- vout: vout2: aml_vout2_probe OK [ 0.717166@5]- DI: di_module_init ok. [ 0.717236@5]- dim:dim_module_init [ 0.717475@5]- dim:dim_probe: [ 0.717711@5]- dev_vframe_init finish [ 0.718040@5]- dim:match name: dim_g12b:id[17] [ 0.718077@5]- dim:no reserved mem. [ 0.718086@5]- dim:warn:alloc_sct:not support:1->0 [ 0.721454@5]- dim:warn:pout:from:3->0 [ 0.725205@5]- dim:pre_irq:63 [ 0.725210@5]- dim:post_irq:64 [ 0.725212@5]- dim:no aisr_irq [ 0.725216@5]- dim:err:dim_get_vpu_clkb: get clk vpu error. [ 0.730736@5]- DI: vpu clkb <334000000, 667000000> [ 0.730755@5]- dim:vpu clkb =666666656. [ 0.730818@5]- dim:afbc_prob:ver[2],_g12a,mode[0] [ 0.730820@5]- dim:init ops:17:(null) [ 0.730828@5]- dim:cvs inp:0x1e~0x1f~0x20. [ 0.730945@5]- . [ 0.730987@5]- . [ 0.731036@5]- dim:dim_probe:ok [ 0.731058@5]- dim:dim_module_init finish [ 0.731060@5]- dil:dil_init. [ 0.731172@5]- dil:dil_init ok. [ 0.731257@5]- Reserved memory: failed to init DMA memory pool at 0x00000000e3c00000, size 0 MiB [ 0.739494@5]- PPMGRDRV: info: ppmgr_dev major:508 [ 0.739628@5]- aml_vecm_init:module init [ 0.739721@5]- VECM probe start [ 0.739835@5]- Can't find tv_mode. [ 0.739837@5]- Can't find lut3d_en. [ 0.739840@5]- Can't find blue stretch en. [ 0.739857@5]- vlock clk not cfg [ 0.753614@5]- vlock_status_init vlock_en:1 [ 0.753750@5]- request amvecm_vsync2_irq successful [ 0.753792@5]- aml_vecm_probe: ok [ 0.753820@5]- amdolby_vision_init:module init [ 0.753951@5]- [ 0.753951@5]- amdolby_vision probe start & ver: 20181220 [ 0.753954@5]- [ 0.753954@5]- cpu_id=2 tvmode=0 [ 0.754031@5]- dolby_vision_init_receiver(dvel) [ 0.754035@5]- dolby_vision_init_receiver: dvel [ 0.754166@5]- amdolby_vision_probe: ok [ 0.754170@5]- g12 dovi disable in uboot [ 0.754479@5]- meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 0.758674@0]h hdmitx: hdmitx_set_drm_pkt: tf=1, cf=1, colormetry=0 [ 0.793631@0]- meson-mmc: meson_mmc_probe() : success! [ 0.798033@5]- meson-mmc: gpio_cd = 1ca [ 0.803729@0]h meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.804795@0]h meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.811648@2]- meson-mmc: meson_mmc_irq_thread_v3 656 emmc: cmd:1 [ 0.811650@2]- meson-mmc: meson_mmc_irq_thread_v3() 686: set 1st retry! [ 0.818236@2]- meson-mmc: retry cmd 1 the 3-th time(s) [ 0.824338@0]h meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.830014@0]h meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.836866@2]- meson-mmc: meson_mmc_irq_thread_v3 656 emmc: cmd:1 [ 0.836868@2]- meson-mmc: retry cmd 1 the 2-th time(s) [ 0.842975@0]h meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.848647@0]h meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.855500@2]- meson-mmc: meson_mmc_irq_thread_v3 656 emmc: cmd:1 [ 0.855502@2]- meson-mmc: retry cmd 1 the 1-th time(s) [ 0.855545@0]- meson-mmc: meson_mmc_probe() : success! [ 0.860881@0]- input: cec_input as /devices/virtual/input/input0 [ 0.861015@0]- cectx ff80023c.aocec: not find 'port_num' [ 0.865965@0]h meson-mmc: emmc: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 0.865967@0]h meson-mmc: emmc: err: wait for irq service, bus_fsm:0x8 [ 0.865979@2]- meson-mmc: meson_mmc_irq_thread_v3 656 emmc: cmd:1 [ 0.865981@2]- meson-mmc: Command retried failed line:708, cmd:1 [ 0.885062@0]- get A default state [ 0.885079@0]- cectx ff80023c.aocec: no clock regs [ 0.889850@2]- cectx ff80023c.aocec: not find 'arc_port_mask' [ 0.898451@2]- cectx ff80023c.aocec: [hdmitx_notify_callback] unsupported notify:3 [ 0.903154@2]- cectx ff80023c.aocec: wakeup_reason:0x0 [ 0.908240@2]- cectx ff80023c.aocec: wakeup_data: 0x0 0x0 [ 0.913744@2]- meson ts init [ 0.913760@2]- tsensor id: 0 [ 0.913816@2]- r1p1_tsensor_read valid cnt is 0 [ 0.913823@2]- tsensor trim info: 0xfa008013! [ 0.913825@2]- tsensor hireboot: 0xc0ff2a80 [ 0.913850@2]- meson ts init [ 0.913860@2]- tsensor id: 1 [ 0.913893@2]- r1p1_tsensor_read valid cnt is 0 [ 0.913897@2]- tsensor trim info: 0xfa00802b! [ 0.913898@2]- tsensor hireboot: 0xc0ff2a90 [ 0.913975@2]- audio_dsp: [dsp]register dsp to char divece(257) [ 0.914067@2]- amaudio: amaudio: driver amaudio init! [ 0.914225@2]- amaudio: amaudio_init - amaudio: driver amaudio succuess! [ 0.914499@2]- sysled: module init [ 0.914592@2]- meson_wdt ffd0f0d0.watchdog: start watchdog [ 0.914595@2]- meson_wdt ffd0f0d0.watchdog: create hrtimer for watch dog [ 0.914690@2]- meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 0.915109@2]- meson-saradc ff809000.saradc: set delay per tick to <1ms> by default. [ 0.915112@2]- meson-saradc ff809000.saradc: set ticks per period to <1> by default. [ 0.915539@2]- dmc_monitor_probe [ 0.915861@2]- defendkey ff630218.defendkey: Reserved memory is not enough! [ 0.920510@2]- defendkey: probe of ff630218.defendkey failed with error -22 [ 0.920777@2]- bl301_manager: driver init [ 0.920778@2]- bl301_manager: IR remote wake-up code: 0x23dc4db2 [ 0.920780@2]- bl301_manager: IR remote wake-up code mask: 0xffffffff [ 0.920781@2]- bl301_manager: IR remote wake-up code protocol: 0x0 [ 0.920782@2]- bl301_manager: enable 5V system power on suspend/power off state: 0 [ 0.934391@2]- usbcore: registered new interface driver snd-usb-audio [ 0.934904@2]- aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe [ 0.934913@2]- T9015 acodec used by auge, tdmout:1 [ 0.935798@2]- asoc debug: aml_audio_controller_probe-129 [ 0.936023@2]- aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 0.936031@2]- TDM id 1 samesource_sel:3 [ 0.936036@2]- snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0 [ 0.936206@2]- snd_tdm ff642000.audiobus:tdmb: aml_tdm_get_pins error! [ 0.936208@2]- No channel mask node Channel_Mask [ 0.936238@2]- aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 0.936245@2]- TDM id 2 i2s2hdmi:1 [ 0.936248@2]- snd_tdm ff642000.audiobus:i2s2hdmi: lane_mask_out = f, lane_oe_mask_out = 0 [ 0.936277@2]- snd_tdm ff642000.audiobus:i2s2hdmi: neither mclk_pad nor mclk2pad set [ 0.936378@2]- snd_tdm ff642000.audiobus:i2s2hdmi: aml_tdm_get_pins error! [ 0.936380@2]- No channel mask node Channel_Mask [ 0.936646@2]- aml_spdif_platform_probe, spdif ID = 0 [ 0.936880@2]- aml_spdif_platform_probe, spdif ID = 1 [ 0.936889@2]- snd_spdif ff642000.audiobus:spdif_b: spdif 1 has no pinctrl! [ 0.937199@2]- audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 26, frddr 29 [ 0.937208@2]- audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 27, frddr 30 [ 0.937216@2]- audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 28, frddr 31 [ 0.937379@2]- datain_src:4, datain_chnum:4, datain_chumask:f [ 0.937381@2]- datalb_src:1, datalb_chnum:2, datalb_chmask:3 [ 0.937382@2]- datain_lane_mask:0x5, datalb_lane_mask:0x1 [ 0.937383@2]- datalb_format: 1, chmask for lanes: 0x3 [ 0.937536@2]- loopback_platform_probe, p_loopback->id:0 register soc platform [ 0.937710@2]- audiolocker_platform_probe [ 0.938422@2]- Register vad [ 0.938511@2]- asoc-aml-card auge_sound: link 0: [ 0.938577@2]- asoc-aml-card auge_sound: name : SPDIF-B-dummy [ 0.938578@2]- asoc-aml-card auge_sound: format : 4010 [ 0.938581@2]- asoc-aml-card auge_sound: cpu : SPDIF-B / 6144000 [ 0.938582@2]- asoc-aml-card auge_sound: codec : dummy / 0 [ 0.938584@2]- asoc-aml-card auge_sound: link 1: [ 0.938638@2]- asoc-aml-card auge_sound: name : TDM-B-T9015-audio-hifi [ 0.938640@2]- asoc-aml-card auge_sound: format : 4011 [ 0.938641@2]- asoc-aml-card auge_sound: cpu : TDM-B / 12288000 [ 0.938643@2]- asoc-aml-card auge_sound: codec : T9015-audio-hifi / 0 [ 0.938644@2]- asoc-aml-card auge_sound: link 2: [ 0.938686@2]- asoc-aml-card auge_sound: name : SPDIF-A-dummy [ 0.938687@2]- asoc-aml-card auge_sound: format : 4010 [ 0.938689@2]- asoc-aml-card auge_sound: cpu : SPDIF-A / 6144000 [ 0.938691@2]- asoc-aml-card auge_sound: codec : dummy / 0 [ 0.938692@2]- asoc-aml-card auge_sound: link 3: [ 0.938744@2]- asoc-aml-card auge_sound: name : TDM-C-dummy [ 0.938745@2]- asoc-aml-card auge_sound: format : 4011 [ 0.938747@2]- asoc-aml-card auge_sound: cpu : TDM-C / 12288000 [ 0.938748@2]- asoc-aml-card auge_sound: codec : dummy / 0 [ 1.057666@0]- meson-mmc: card IN [ 1.145676@2]- asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 1.147873@2]- snd_tdm ff642000.audiobus:i2s2hdmi: ASoC: Failed to add I2SIn CLK: -16 [ 1.155688@2]- aml_dai_tdm_probe, failed add snd tdm controls [ 1.161398@2]- set normal 512 fs /4 fs [ 1.161416@2]- set spdifout clk:6144000, mpll:24576000 [ 1.161417@2]- get spdifout clk:6143997, mpll:24575987 [ 1.161456@2]- aml_spdif_new spdif_b, clk continuous:1 [ 1.161458@2]- spdifout_play_with_zerodata_free, spdif id:1 [ 1.161462@2]- asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok [ 1.161471@2]- set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987 [ 1.161474@2]- aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.161475@2]- lanes_out_cnt(1), lanes_in_cnt(1) [ 1.161476@2]- lanes_lb_cnt(0) [ 1.161477@2]- slots(2), slot_width(32) [ 1.161478@2]- lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.161484@2]- asoc aml_dai_set_tdm_fmt, 0x4011, 000000003223b64d, id(1), clksel(1) [ 1.161487@2]- master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.161529@2]- asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok [ 1.161530@2]- set normal 512 fs /4 fs [ 1.161538@2]- set spdifout clk:6144000, mpll:24576000 [ 1.161540@2]- get spdifout clk:6143997, mpll:24575987 [ 1.161576@2]- aml_spdif_new spdif_a, clk continuous:1 [ 1.161577@2]- spdifout_play_with_zerodata_free, spdif id:0 [ 1.161580@2]- asoc-aml-card auge_sound: dummy <-> SPDIF-A mapping ok [ 1.161588@2]- set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987 [ 1.161589@2]- aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.161590@2]- lanes_out_cnt(4), lanes_in_cnt(0) [ 1.161591@2]- lanes_lb_cnt(0) [ 1.161592@2]- slots(2), slot_width(32) [ 1.161593@2]- lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.161602@2]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000ceabc8b0, id(2), clksel(2) [ 1.161605@2]- master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.161616@0]- meson-mmc: normal card in [ 1.161655@2]- asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 1.162279@5]- snd_card_add_kcontrols card:000000004f268cb7 [ 1.162284@5]- effect_v2 is not init [ 1.162285@5]- Not init vad [ 1.162286@5]- Failed to add VAD controls [ 1.162293@5]- eq/drc v1 function enable [ 1.165620@2]- hdmitx: system: plugin [ 1.193997@5]- NET: Registered protocol family 10 [ 1.194416@5]- NET: Registered protocol family 17 [ 1.194447@5]- Key type dns_resolver registered [ 1.194595@5]- Registered swp emulation handler [ 1.194603@5]- Registered cp15_barrier emulation handler [ 1.194609@5]- Registered setend emulation handler [ 1.194981@5]- registered taskstats version 1 [ 1.198293@5]- dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 1.200926@5]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.200936@5]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.201116@5]- xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010 [ 1.201140@5]- xhci-hcd xhci-hcd.0.auto: irq 15, io mem 0xff500000 [ 1.201201@5]- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.201204@5]- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.201206@5]- usb usb1: Product: xHCI Host Controller [ 1.201208@5]- usb usb1: Manufacturer: Linux 4.9.269 xhci-hcd [ 1.201210@5]- usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.201453@5]- hub 1-0:1.0: USB hub found [ 1.201465@5]- hub 1-0:1.0: 2 ports detected [ 1.201595@5]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.201616@5]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.201641@5]- usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.201671@5]- usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.201674@5]- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.201676@5]- usb usb2: Product: xHCI Host Controller [ 1.201678@5]- usb usb2: Manufacturer: Linux 4.9.269 xhci-hcd [ 1.201679@5]- usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.201892@5]- hub 2-0:1.0: USB hub found [ 1.201904@5]- hub 2-0:1.0: 1 port detected [ 1.203329@5]- rtc-pcf8563 3-0051: setting system clock to 2022-02-27 10:28:08 UTC (1645957688) [ 1.203496@5]- dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(000000007fdc9006) [ 1.203508@5]- dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 1.203516@5]- dwc_otg ff400000.dwc2_a: base=0xffffff8008b40000 [ 1.203518@5]- dwc_otg ff400000.dwc2_a: dwc_otg_device=0x00000000ce78e5f5 [ 1.298739@2]d hdmitx: edid: EDID Parser: [ 1.298751@2]d hdmitx: edid: get dtd0 vic: 5 [ 1.298753@2]d hdmitx: edid: get dtd1 vic: 20 [ 1.298758@2]d hdmitx: edid: get dtd2 vic: 97 [ 1.298759@2]d hdmitx: edid: get dtd3 vic: 16 [ 1.298760@2]d hdmitx: hdmitx: get PMT vic: 97 [ 1.298762@2]d hdmitx: edid: find IEEEOUT [ 1.298769@2]- cectx ff80023c.aocec: [hdmitx_notify_callback] unsupported notify:3 [ 1.300702@2]- hdmitx: edid: blk0 raw data [ 1.300718@2]- hdmitx: edid: [ 1.300718@2]- 00ffffffffffff00412f00000101010100160103807341780acf74a3574cb023 [ 1.300718@2]- 09484c21080081c0814081800101010101010101010108e80030f2705a80b058 [ 1.300718@2]- 8a00ba882100001e023a801871382d40582c4500501d7400001e000000fd0018 [ 1.300718@2]- 4b0f883c000a202020202020000000fc005653582d3532380a20202020200101 [ 1.300718@2]- [ 1.300718@2]- [ 1.300720@2]- hdmitx: edid: blk1 raw data [ 1.300735@2]- hdmitx: edid: [ 1.300735@2]- 02033f714e01020405101113141f202122120338097f070f7f071507503e1ec0 [ 1.300735@2]- 492a005706005f7e01677f00834f000067030c0035008807e200f9e305000001 [ 1.300735@2]- 1d8018711c1620582c2500c48e2100009e011d80d0721c1620102c2580c48e21 [ 1.300735@2]- 00009e0000000000000000000000000000000000000000000000000000000074 [ 1.300735@2]- [ 1.300735@2]- [ 1.300737@2]- hdmitx: system: update physical size: 1150 650 [ 1.300740@2]- hdmitx: system: get current mode: 1080p50hz [ 1.300741@2]- hdmitx: system: update physical size: 1150 650 [ 1.300767@2]- hdmitx: video: already init VIC = 0 Now VIC = 31 [ 1.300769@2]- hdmitx: hw: div40: 0 [ 1.303632@5]- dwc_otg: Core Release: 3.30a [ 1.303634@5]- dwc_otg: Setting default values for core params [ 1.303640@5]- dwc_otg: curmode: 0, host_only: 0 [ 1.303651@5]- dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT [ 1.315773@5]- dwc_otg: Using Buffer DMA mode [ 1.315775@5]- dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.315776@5]- dwc_otg: Working on port type = SLAVE [ 1.315779@5]- dwc_otg: Dedicated Tx FIFOs mode [ 1.317035@5]- meson_cdev probe [ 1.317041@5]- thermal: read gpupp failed [ 1.317103@5]- meson_cdev index: 0 [ 1.317163@5]- thermal: read gpupp failed [ 1.319426@5]- meson_cdev index: 1 [ 1.319467@5]- thermal: read dyn_coeff failed [ 1.323742@5]- thermal: read gpupp failed [ 1.327612@2]- hdmitx: E: ddc w1b 0x54 0x20 0x00 [ 1.327616@2]- hdmitx: this mode doesn't have frac_rate [ 1.327617@2]- hdmitx: frac_rate = 0 [ 1.327618@2]- hdmitx: hdmitx: set clk: VIC = 31 cd = 4 cs = 2 frac_rate = 0 [ 1.327621@2]- hdmitx: config HPLL = 5940000 frac_rate = 0 [ 1.327674@2]- hdmitx: HPLLv1: 0xdb3a04f7 [ 1.327675@2]- hdmitx: config HPLL done [ 1.327680@2]- hdmitx: set_hpll_od3_clk_div[687] div = 6 [ 1.327684@2]- hdmitx: j = 4 vid_clk_div = 1 [ 1.327691@2]- hdmitx: set enc for VIC: 31 [ 1.327734@5]- thermal: no cluster id, cpucore as one cooldev [ 1.327746@5]- meson_cdev index: 2 [ 1.327749@5]- cpucore_cooling_register, max_cpu_core_num:6 [ 1.327751@5]- cpucore_cooling_register, clutser[1] core num:4 [ 1.327752@5]- cpucore_cooling_register, clutser[0] core num:2 [ 1.327791@5]- thermal: no cluster id, cpucore as one cooldev [ 1.327802@5]- meson_cdev index: 3 [ 1.327804@5]- thermal: read dyn_coeff failed [ 1.332061@5]- thermal: read gpupp failed [ 1.336047@5]- thermal: no cluster id, cpucore as one cooldev [ 1.336057@5]- meson_cdev index: 4 [ 1.336080@5]- find tzd id: 0 [ 1.336151@5]- find tzd id: 0 [ 1.336203@5]- find tzd id: 0 [ 1.336222@5]- meson_cdev probe done [ 1.336283@5]- gxbb_pm: enter meson_pm_probe! [ 1.336286@5]- no vddio3v3_en pin [ 1.336291@5]- pm-meson pm: Can't get switch_clk81 [ 1.340828@5]- gxbb_pm: meson_pm_probe done [ 1.341453@5]- ALSA device list: [ 1.341455@5]- #0: AML-AUGESOUND [ 1.342770@5]- Freeing unused kernel memory: 5056K [ 1.365673@2]- hdmitx: hw: config hdmitx IP vic = 31 cd:4 cs: 2 [ 1.365773@0]h hdmitx: system: irq 80000001 0 [ 1.366107@0]- sd: new high speed SDHC card at address e624 [ 1.366110@0]- sd: clock 50000000, 4-bit-bus-width [ 1.366110@0]- [ 1.371720@0]- mmcblk1: sd:e624 SP16G 14.8 GiB [ 1.372486@0]- mmcblk1: p1 p2 [ 1.375767@2]- hdmitx: video: Sink is HDMI device [ 1.375803@2]- hdmitx: hw: set audio [ 1.375808@2]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.375819@2]- hdmitx: fs = 3, cd = 4, tmds_clk = 148500 [ 1.375820@2]- hdmitx: hw: aud_n_para = 6144 [ 1.375827@2]- hdmitx: hw: set channel status [ 1.375840@2]- hdmitx: hw: [0x10e3] = 0x1f [ 1.375858@2]- hdmitx: audio: Audio Type: PCM [ 1.375861@2]- hdmitx: system: update rx hdr info 0 [ 1.375862@2]- hdmitx: hw: set audio [ 1.375863@2]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.375874@2]- hdmitx: fs = 3, cd = 4, tmds_clk = 148500 [ 1.375875@2]- hdmitx: hw: aud_n_para = 6144 [ 1.375882@2]- hdmitx: hw: set channel status [ 1.375894@2]- hdmitx: hw: [0x10e3] = 0x1f [ 1.375912@2]- hdmitx: audio: Audio Type: PCM [ 1.376253@5]- fb: malloc_osd_memory, cma:ffffff800aec0698 [ 1.376257@5]- fb: malloc_osd_memory, 1224, base:0x0000000077800000, size:8388608 [ 1.376270@5]- fb: use ion buffer for fb memory, fb_index=0 [ 1.376272@5]- fb: OSD0 as afbcd mode,afbc_type=2 [ 1.403266@1]- meson-fb meson-fb: create ion_client ffffffc0dc03b240, handle=00000000b9cc630b [ 1.406247@1]- meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB [ 1.414784@2]- fb: 0, phy: 0x00000000e5800000, vir:0xffffff800af70000, size=77312K [ 1.414784@2]- [ 1.414785@2]- fb: Frame buffer memory assigned at [ 1.414787@2]- fb: 0, phy: 0x00000000e5800000, vir:0xffffff800af70000, size=77312K [ 1.414787@2]- [ 1.414789@2]- fb: 0, phy: 0x00000000e5800000, vir:0xffffff800af70000, size=77312K [ 1.414789@2]- [ 1.414791@2]- fb: logo_index=0,fb_index=0 [ 1.414792@2]- fb: ---------------clear fb0 memory 0000000086c47e53 [ 1.428130@2]- fb: osd[0] canvas.idx =0x40 [ 1.428131@2]- fb: osd[0] canvas.addr=0xe5800000 [ 1.428132@2]- fb: osd[0] canvas.width=7680 [ 1.428133@2]- fb: osd[0] canvas.height=2160 [ 1.428134@2]- fb: osd[0] frame.width=1920 [ 1.428135@2]- fb: osd[0] frame.height=1080 [ 1.428135@2]- fb: osd[0] out_addr_id =0x1 [ 1.435916@2]- fb: osd_release now.index=0,open_count=1 [ 1.436807@3]- fb: malloc_osd_memory, cma:ffffff800aec0698 [ 1.436810@3]- fb: malloc_osd_memory, 1224, base:0x0000000077800000, size:8388608 [ 1.436811@3]- fb: use ion buffer for fb memory, fb_index=1 [ 1.436812@3]- fb: OSD1 as afbcd mode,afbc_type=2 [ 1.441290@3]- meson-fb meson-fb: create ion_client ffffffc0dc03b240, handle=000000006a4a71f1 [ 1.444188@3]- meson-fb meson-fb: ion memory(1): created fb at 0x00000000ea400000, size 1 MiB [ 1.452692@3]- fb: 1, phy: 0x00000000ea400000, vir:0xffffff8008cf5000, size=1024K [ 1.452692@3]- [ 1.452693@3]- fb: Frame buffer memory assigned at [ 1.452695@3]- fb: 1, phy: 0x00000000ea400000, vir:0xffffff8008cf5000, size=1024K [ 1.452695@3]- [ 1.452697@3]- fb: 1, phy: 0x00000000ea400000, vir:0xffffff8008cf5000, size=1024K [ 1.452697@3]- [ 1.452698@3]- fb: logo_index=0,fb_index=1 [ 1.452700@3]- fb: ---------------clear fb1 memory 00000000f8bdff06 [ 1.452880@3]- fb: osd[1] canvas.idx =0x43 [ 1.452881@3]- fb: osd[1] canvas.addr=0xea400000 [ 1.452882@3]- fb: osd[1] canvas.width=128 [ 1.452883@3]- fb: osd[1] canvas.height=32 [ 1.452884@3]- fb: osd[1] frame.width=32 [ 1.452885@3]- fb: osd[1] frame.height=32 [ 1.452885@3]- fb: osd[1] out_addr_id =0x2 [ 1.456052@0]- fb: osd_release now.index=1,open_count=1 [ 1.465633@5]d amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(0) tuning for host cf(xhci_hub_control)-- [ 1.469612@2]- hdmitx: [0x10000104]: 0x00000001 [ 1.469620@2]- hdmitx: [0x10000180]: 0x000000ff [ 1.469621@2]- hdmitx: [0x10000181]: 0x000000ff [ 1.469623@2]- hdmitx: [0x10000182]: 0x00000003 [ 1.469624@2]- hdmitx: [0x10000183]: 0x00000007 [ 1.469625@2]- hdmitx: [0x10000184]: 0x0000003f [ 1.469626@2]- hdmitx: [0x10000185]: 0x00000002 [ 1.469628@2]- hdmitx: [0x10000187]: 0x000000ff [ 1.469629@2]- hdmitx: [0x10000188]: 0x00000003 [ 1.476008@1]- VID: VD1 off [ 1.476121@1]- fb: osd[0] enable: 1 (sh) [ 1.495931@1]- fb: osd[1] enable: 0 (sh) [ 1.523889@2]- init: ### Loading kernel modules [ 1.524895@3]- init: ### Loading kernel module font [ 1.525451@2]- init: ### Loading kernel module softcursor [ 1.525627@5]- usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.525974@3]- init: ### Loading kernel module bitblit [ 1.526458@2]- init: ### Loading kernel module fbcon [ 1.535882@0]- Console: switching to colour frame buffer device 240x67 [ 1.551059@2]- init: ### Set console font [ 1.552957@3]- init: ### Checking disk(s): UUID=2602-1726 UUID=bd868225-1214-4bc9-918f-9018af4ba431 [ 1.667966@5]- usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 1.667969@5]- usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.667971@5]- usb 1-1: Product: USB2.1 Hub [ 1.667973@5]- usb 1-1: Manufacturer: GenesysLogic [ 1.681857@5]- hub 1-1:1.0: USB hub found [ 1.682101@5]- hub 1-1:1.0: 4 ports detected [ 1.709613@5]- av out status: high av_mute_sleep_time:500 [ 1.789719@5]- usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 1.812239@5]- usb 2-1: New USB device found, idVendor=05e3, idProduct=0620 [ 1.812242@5]- usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.812244@5]- usb 2-1: Product: USB3.1 Hub [ 1.812245@5]- usb 2-1: Manufacturer: GenesysLogic [ 1.825830@5]- hub 2-1:1.0: USB hub found [ 1.826113@5]- hub 2-1:1.0: 4 ports detected [ 1.849929@0]- init: ### Cannot initialize conversion from codepage 850 to ANSI_X3.4-1968: Invalid argument [ 1.850112@0]- init: ### Cannot initialize conversion from ANSI_X3.4-1968 to codepage 850: Invalid argument [ 1.850207@0]- init: ### Using internal CP850 conversion table [ 1.850281@0]- init: ### fsck.fat 4.2 (2021-01-31) [ 1.850389@0]- init: ### /dev/mmcblk1p1: 73 files, 28313/65501 clusters [ 1.850524@0]- init: ### STORAGE: clean, 1828/3758080 files, 994612/15029760 blocks [ 1.851819@0]- init: ### No filesystem errors found, continuing... [ 1.851927@0]- init: ### Mounting flash [ 1.851994@0]- init: ### mount filesystem UUID=2602-1726 ... [ 1.895338@0]- init: ### Cleaning up flash (if required) [ 1.895716@0]- init: ### mount filesystem /flash/SYSTEM ... [ 1.951504@0]- init: ### Mounting storage [ 1.951664@0]- init: ### mount filesystem UUID=bd868225-1214-4bc9-918f-9018af4ba431 ... [ 1.982247@1]- EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 1.982660@1]- EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 2.025607@5]- usb 1-1.1: new low-speed USB device number 3 using xhci-hcd [ 2.044476@1]- EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.060119@0]- init: ### Loading bootsplash [ 2.066365@0]- init: ### Checking for updates [ 2.087423@1]- init: ### Preparing system [ 2.129283@3]- init: ### Checking Amlogic DTB [ 2.159801@5]- usb 1-1.1: New USB device found, idVendor=20a0, idProduct=0001 [ 2.159805@5]- usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.159807@5]- usb 1-1.1: Product: flirc [ 2.159809@5]- usb 1-1.1: Manufacturer: flirc.tv [ 2.175494@5]- input: flirc.tv flirc as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:20A0:0001.0001/input/input1 [ 2.233869@5]- hid-generic 0003:20A0:0001.0001: input,hidraw0: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-xhci-hcd.0.auto-1.1/input0 [ 2.233961@5]- usb 1-1.1: Unsupported device [ 2.337666@5]- usb 1-1.2: new full-speed USB device number 4 using xhci-hcd [ 2.467740@5]- usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52e [ 2.467745@5]- usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.467747@5]- usb 1-1.2: Product: USB Receiver [ 2.467749@5]- usb 1-1.2: Manufacturer: Logitech [ 2.483289@5]- input: Logitech USB Receiver as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52E.0002/input/input2 [ 2.538896@0]- kernel-overlays-setup: setup base modules [ 2.541919@5]- hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.2/input0 [ 2.544613@5]- input: Logitech USB Receiver as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52E.0003/input/input3 [ 2.590262@3]- kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.269 [ 2.602093@5]- hid-generic 0003:046D:C52E.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.2/input1 [ 2.627143@0]- kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 2.627364@0]- kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 2.628116@0]- kernel-overlays-setup: done [ 2.709624@5]- usb 1-1.3: new high-speed USB device number 5 using xhci-hcd [ 2.836236@5]- usb 1-1.3: New USB device found, idVendor=0930, idProduct=6544 [ 2.836239@5]- usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.836241@5]- usb 1-1.3: Product: TransMemory [ 2.836243@5]- usb 1-1.3: Manufacturer: TOSHIBA [ 2.836244@5]- usb 1-1.3: SerialNumber: 0022CFF6B89AC140A6DAB34F [ 2.836989@5]- usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 2.841133@5]- scsi host0: usb-storage 1-1.3:1.0 [ 2.862786@0]- cgroup: cgroup2: unknown option "nsdelegate" [ 2.867899@0]- systemd[1]: systemd 247.9 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 2.868428@0]- systemd[1]: Detected architecture arm64. [ 2.871465@2]- systemd[1]: Set hostname to . [ 3.011309@3]- systemd[1]: Queued start job for default target Kodi Mediacenter Interface. [ 3.030338@3]- systemd[1]: Created slice Slice /system/modprobe. [ 3.030856@3]- systemd[1]: Created slice User and Session Slice. [ 3.030971@3]- systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.031064@3]- systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.031212@3]- systemd[1]: Reached target Host and Network Name Lookups. [ 3.031238@3]- systemd[1]: Reached target Paths. [ 3.031299@3]- systemd[1]: Reached target Slices. [ 3.039185@3]- systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.039262@3]- systemd[1]: Reached target RPC Port Mapper. [ 3.039421@3]- systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.039772@3]- systemd[1]: Listening on Journal Audit Socket. [ 3.039967@3]- systemd[1]: Listening on Journal Socket (/dev/log). [ 3.040175@3]- systemd[1]: Listening on Journal Socket. [ 3.040586@3]- systemd[1]: Listening on udev Control Socket. [ 3.040737@3]- systemd[1]: Listening on udev Kernel Socket. [ 3.040974@3]- systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.043953@3]- systemd[1]: Mounting POSIX Message Queue File System... [ 3.045583@3]- systemd[1]: Mounting Kernel Debug File System... [ 3.049175@3]- systemd[1]: Mounting Kernel Trace File System... [ 3.050937@3]- systemd[1]: Mounting Variable Directory... [ 3.052859@3]- systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY. [ 3.052949@2]- meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 3.054908@3]- systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.057029@3]- systemd[1]: Starting Load Kernel Module configfs... [ 3.058656@3]- systemd[1]: Starting Load Kernel Module drm... [ 3.060177@3]- systemd[1]: Starting Load Kernel Module fuse... [ 3.061831@3]- systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs... [ 3.063416@3]- systemd[1]: Starting Mounting swapfile... [ 3.075805@3]- systemd[1]: Starting Rebuild Hardware Database... [ 3.082659@3]- systemd[1]: Starting Load Kernel Modules... [ 3.084133@3]- systemd[1]: Starting Setup NTP servers for timesyncd... [ 3.085675@3]- systemd[1]: Starting Coldplug All udev Devices... [ 3.087318@3]- systemd[1]: Starting Wait for Kernel Time Synchronisation... [ 3.090602@3]- systemd[1]: Mounted POSIX Message Queue File System. [ 3.090870@3]- systemd[1]: Mounted Kernel Debug File System. [ 3.091087@3]- systemd[1]: Mounted Kernel Trace File System. [ 3.091293@3]- systemd[1]: Mounted Variable Directory. [ 3.099800@3]- systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs. [ 3.104038@3]- systemd[1]: Condition check resulted in Persistent Log Storage being skipped. [ 3.141762@3]- systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.220188@5]- systemd[1]: Finished Setup NTP servers for timesyncd. [ 3.228178@4]- systemd[1]: modprobe@configfs.service: Succeeded. [ 3.228961@4]- systemd[1]: Finished Load Kernel Module configfs. [ 3.229557@4]- systemd[1]: modprobe@drm.service: Succeeded. [ 3.230245@4]- systemd[1]: Finished Load Kernel Module drm. [ 3.231833@4]- systemd[1]: Mounting Kernel Configuration File System... [ 3.238939@4]- systemd[1]: Mounted Kernel Configuration File System. [ 3.267964@0]- fuse init (API version 7.26) [ 3.270626@5]- media: Linux media interface: v0.10 [ 3.301757@5]- Linux video capture interface: v2.00 [ 3.322396@1]- systemd[1]: modprobe@fuse.service: Succeeded. [ 3.323562@1]- systemd[1]: Finished Load Kernel Module fuse. [ 3.328597@1]- systemd[1]: Mounting FUSE Control File System... [ 3.344900@0]- amlvideo-000: V4L2 device registered as video10 [ 3.344906@0]- amlvid:info: v4l2_dev.name=:amlvideo-001 [ 3.345125@0]- amlvideo-001: V4L2 device registered as video23 [ 3.354112@1]- systemd[1]: Mounted FUSE Control File System. [ 3.362330@1]- video_framerate_adapter: loading out-of-tree module taints kernel. [ 3.362932@1]- Registered frame rate driver success. [ 3.364498@1]- No find node. [ 3.364545@1]- register clk_set_setting cpu[41] [ 3.370450@1]- systemd[1]: Finished Mounting swapfile. [ 3.370886@1]- systemd[1]: Reached target Swap. [ 3.373661@1]- systemd[1]: Mounting Temporary Directory (/tmp)... [ 3.375343@3]- Registered firmware driver success. [ 3.375859@3]- Try to load video/h264_enc.bin ... [ 3.375888@3]- load firmware size : 76288, Name : video/h264_enc.bin. [ 3.376378@3]- Try to load video/video_ucode.bin ... [ 3.377043@3]- load firmware size : 1871104, Name : video/video_ucode.bin. [ 3.377047@3]- The fw driver version (v0.2) is lower than the pkg version (v0.3). [ 3.377048@3]- The driver version is too low that may affect the work please update asap. [ 3.379795@5]- systemd[1]: Mounted Temporary Directory (/tmp). [ 3.380140@5]- systemd[1]: Reached target Local File Systems. [ 3.382198@5]- systemd[1]: Starting Setup machine-id... [ 3.393932@3]- Amlogic A/V streaming port init [ 3.396755@3]- get gate demux control ok 000000004c75b1e2 [ 3.396777@3]- get gate parser_top control ok 00000000715616c9 [ 3.396801@3]- get gate vdec control ok 000000006d9fa867 [ 3.396811@3]- get gate clk_81 control failed (null) [ 3.396834@3]- get gate clk_vdec_mux control ok 00000000d845c8b4 [ 3.396861@3]- get gate clk_hcodec_mux control ok 00000000707d28c7 [ 3.396889@3]- get gate clk_hevc_mux control ok 000000006509f74b [ 3.396923@3]- get gate clk_hevcb_mux control ok 000000009109f592 [ 3.396939@3]- get gate ahbarb0 control ok 00000000eddec206 [ 3.396943@3]- get gate asyncfifo control failed (null) [ 3.396946@3]- get gate clk_hevcf_mux control failed (null) [ 3.396949@3]- get mux clk err. [ 3.396950@3]- get mux clk err. [ 3.396952@3]- get mux clk err. [ 3.415843@4]- amvdec_avs module init [ 3.420502@3]- amvdec_h264 module init [ 3.425274@3]- amvdec_h265 module init [ 3.431837@1]- systemd[1]: Finished Setup machine-id. [ 3.433458@3]- ammvdec_h264 module init [ 3.436824@1]- systemd[1]: Starting Journal Service... [ 3.437496@4]- ammvdec_mpeg12 module init [ 3.439085@4]- ammvdec_mpeg4_driver_init_module [ 3.439905@1]- systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.442964@1]- systemd[1]: Finished Coldplug All udev Devices. [ 3.459887@3]- amvdec_vc1 module init [ 3.469237@2]- amvdec_vp9 module init [ 3.478841@2]- Triggered SDIO WiFi power on and bus rescan. [ 3.478850@2]- (NULL device *): [extern_wifi_set_enable] WIFI Disable! 0 [ 3.510563@3]- systemd[1]: Finished Create Static Device Nodes in /dev. [ 3.510900@3]- systemd[1]: Started Journal Service. [ 3.519397@4]- systemd-journald[3097]: Received client request to flush runtime journal. [ 3.589635@5]- lcd vlock_en=1, vlock_mode=0x4 [ 3.789639@3]- (NULL device *): [extern_wifi_set_enable] WIFI Enable! 0 [ 3.870612@3]- scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [ 3.871181@4]- sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.871488@4]- sd 0:0:0:0: [sda] 30274560 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 3.871695@3]- sd 0:0:0:0: [sda] Write Protect is off [ 3.871699@3]- sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 3.871910@5]- sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.884423@4]- sda: sda1 [ 3.885953@2]- sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.113622@3]- meson-mmc: Error: sdio_host is NULL [ 4.113626@3]- meson-mmc: [sdio_reinit] finish [ 4.133540@5]- wireguard: WireGuard 1.0.20210219 loaded. See www.wireguard.com for information. [ 4.133543@5]- wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 4.376198@1]- Console: switching to colour dummy device 80x25 [ 4.398964@2]- proc: unrecognized mount option "hidepid=invisible" or missing value [ 4.470583@5]- mali ffe40000.bifrost: Continuing without Mali regulator control [ 4.470661@5]- mali ffe40000.bifrost: max pp is 2 [ 4.470663@5]- mali ffe40000.bifrost: set min pp to default 1 [ 4.470665@5]- mali ffe40000.bifrost: min pp is 1 [ 4.470667@5]- mali ffe40000.bifrost: set min clk default to 0 [ 4.470669@5]- mali ffe40000.bifrost: min clk is 0 [ 4.470680@5]- mali ffe40000.bifrost: hiu io source 0x000000004f685bad [ 4.470684@5]- mali ffe40000.bifrost: hiu io source 0x00000000a70baf12 [ 4.470687@5]- mali ffe40000.bifrost: num of pp used most of time 1 [ 4.470689@5]- mali ffe40000.bifrost: clock dvfs cfg table size is 6 [ 4.470701@5]- mali ffe40000.bifrost: max clk set 4 [ 4.470703@5]- mali ffe40000.bifrost: max clk is 4 [ 4.470705@5]- mali ffe40000.bifrost: turbo clk set to 5 [ 4.470706@5]- mali ffe40000.bifrost: turbo clk is 5 [ 4.470708@5]- mali ffe40000.bifrost: default clk set to 4 [ 4.470709@5]- mali ffe40000.bifrost: default clk is 4 [ 4.470713@5]- mali ffe40000.bifrost: ====================0==================== [ 4.470713@5]- clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<0 76>, clk_sample=285 [ 4.470716@5]- mali ffe40000.bifrost: ====================1==================== [ 4.470716@5]- clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400 [ 4.470883@5]- mali ffe40000.bifrost: ====================2==================== [ 4.470883@5]- clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<38 194>, clk_sample=500 [ 4.470887@5]- mali ffe40000.bifrost: ====================3==================== [ 4.470887@5]- clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<150 203>, clk_sample=666 [ 4.470890@5]- mali ffe40000.bifrost: ====================4==================== [ 4.470890@5]- clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800 [ 4.470893@5]- mali ffe40000.bifrost: ====================5==================== [ 4.470893@5]- clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800 [ 4.470895@5]- mali ffe40000.bifrost: clock dvfs table size is 6 [ 4.470997@5]- mali_plat=00000000d92ce32c [ 4.471214@5]- find tzd id: 0 [ 4.471250@5]- gpu cooling register okay with err=0 [ 4.471345@5]- find tzd id: 0 [ 4.471355@5]- gpu core cooling register okay with err=0 [ 4.471379@5]- shader_present=3, tiler_present=1, l2_present=1 [ 4.471463@5]- Mali_pwr_on:gpu_irq : 200 [ 4.471634@5]- mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0 [ 4.471797@5]- mali ffe40000.bifrost: Using coherency mode 0 set from dtb [ 4.475639@0]- mali ffe40000.bifrost: Probed as mali0 [ 4.490233@1]- Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.364950@0]- meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP. [ 5.369792@3]- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.507320@0]- proc: unrecognized mount option "hidepid=invisible" or missing value [ 9.453937@0]d meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.453958@0]- IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.476173@0]- 8021q: 802.1Q VLAN Support v1.8 [ 10.479328@1]- Registered IR keymap rc-empty [ 10.479579@1]- input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input4 [ 10.479854@1]- rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0 [ 10.489878@1]- lirc_dev: IR Remote Control driver registered, major 499 [ 10.494787@1]- IR LIRC bridge handler initialized [ 10.497874@0]- rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0 [ 10.497921@0]- meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011 [ 10.497933@0]- meson-ir ff808040.meson-ir: receiver initialized [ 10.606040@0]- IR NEC protocol handler initialized [ 10.637989@1]- IR RC6 protocol handler initialized [ 12.648498@0]- Not init audio effects [ 12.649077@4]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 12.649691@4]- tdm playback mute: 1, lane_cnt = 4 [ 12.649796@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 12.650821@0]- Not init audio effects [ 12.654534@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 12.655252@0]- tdm playback mute: 1, lane_cnt = 4 [ 12.655310@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 12.656155@0]- Not init audio effects [ 12.656266@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 12.656560@0]- tdm playback mute: 1, lane_cnt = 4 [ 12.656612@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 12.657468@0]- Not init audio effects [ 12.657585@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 12.657902@0]- tdm playback mute: 1, lane_cnt = 4 [ 12.657970@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 12.658932@0]- Not init audio effects [ 12.659063@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 12.659444@0]- tdm playback mute: 1, lane_cnt = 4 [ 12.659502@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 12.673452@2]- Not init audio effects [ 12.673562@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 12.674145@2]- tdm playback mute: 1, lane_cnt = 4 [ 12.674188@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 12.674611@2]- Not init audio effects [ 12.674701@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 12.675110@2]- tdm playback mute: 1, lane_cnt = 4 [ 12.675138@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 12.675587@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif [ 12.675789@2]- spdif_a keep clk continuous [ 12.675814@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif [ 12.676210@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 12.676702@2]- spdif_b keep clk continuous [ 12.676726@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 12.680181@0]- audio_dsp: buf=0 [ 12.680187@0]- audio_dsp: IEC958_mode_raw=0 [ 12.685663@0]- Not init audio effects [ 12.685799@1]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 12.687427@1]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 12.687435@1]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000ceabc8b0, id(2), clksel(2) [ 12.687436@1]- aml_tdm_set_fmt(), fmt not change [ 12.687443@1]- dump_pcm_setting(00000000ceabc8b0) [ 12.687444@1]- pcm_mode(1) [ 12.687445@1]- sysclk(11289600) [ 12.687446@1]- sysclk_bclk_ratio(4) [ 12.687447@1]- bclk(2822400) [ 12.687448@1]- bclk_lrclk_ratio(64) [ 12.687450@1]- lrclk(44100) [ 12.687451@1]- tx_mask(0x3) [ 12.687452@1]- rx_mask(0x3) [ 12.687453@1]- slots(2) [ 12.687454@1]- slot_width(32) [ 12.687455@1]- lane_mask_in(0x0) [ 12.687456@1]- lane_mask_out(0xf) [ 12.687457@1]- lane_oe_mask_in(0x0) [ 12.687459@1]- lane_oe_mask_out(0x0) [ 12.687460@1]- lane_lb_mask_in(0x0) [ 12.687462@1]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 12.687464@1]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 12.687471@1]- aml_set_bclk_ratio, select I2S mode [ 12.687575@1]- hdmitx: hw: set audio [ 12.687578@1]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 12.687591@1]- hdmitx: fs = 3, cd = 4, tmds_clk = 148500 [ 12.687593@1]- hdmitx: hw: aud_n_para = 6144 [ 12.687601@1]- hdmitx: hw: set channel status [ 12.713646@1]- hdmitx: hw: [0x10e3] = 0x1f [ 12.713669@1]- hdmitx: audio: Audio Type: PCM [ 12.713673@1]- hdmitx: hw: set audio [ 12.713677@1]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 12.713688@1]- hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 12.713691@1]- hdmitx: hw: aud_n_para = 6272 [ 12.713699@1]- hdmitx: hw: set channel status [ 12.741658@1]- hdmitx: hw: [0x10e3] = 0x1f [ 12.741681@1]- hdmitx: audio: Audio Type: PCM [ 12.741683@1]- hdmitx: audio: set audio param [ 12.741906@1]- tdm playback mute: 0, lane_cnt = 4 [ 12.742162@1]- tdm playback mute: 0, lane_cnt = 4 [ 12.744642@1]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 12.878092@1]- fb: osd_release now.index=0,open_count=1 [ 12.890587@1]- fb: malloc_osd_memory, cma:ffffff800aec0698 [ 12.890595@1]- fb: malloc_osd_memory, 1224, base:0x0000000077800000, size:8388608 [ 12.890597@1]- fb: use ion buffer for fb memory, fb_index=2 [ 12.890599@1]- fb: OSD2 as afbcd mode,afbc_type=2 [ 12.891124@1]- meson-fb meson-fb: create ion_client ffffffc0dc03b240, handle=00000000fdd0da49 [ 12.891128@1]- meson-fb meson-fb: ion memory(2): created fb at 0x00000000ea500000, size 1 MiB [ 12.891131@1]- fb: 2, phy: 0x00000000ea500000, vir:0xffffff8010c0a000, size=1024K [ 12.891131@1]- [ 12.891133@1]- fb: Frame buffer memory assigned at [ 12.891135@1]- fb: 2, phy: 0x00000000ea500000, vir:0xffffff8010c0a000, size=1024K [ 12.891135@1]- [ 12.891138@1]- fb: 2, phy: 0x00000000ea500000, vir:0xffffff8010c0a000, size=1024K [ 12.891138@1]- [ 12.891140@1]- fb: logo_index=0,fb_index=2 [ 12.891142@1]- fb: ---------------clear fb2 memory 0000000002e30419 [ 12.891276@1]- fb: osd[2] canvas.idx =0x41 [ 12.891278@1]- fb: osd[2] canvas.addr=0xea500000 [ 12.891279@1]- fb: osd[2] canvas.width=128 [ 12.891281@1]- fb: osd[2] canvas.height=32 [ 12.891282@1]- fb: osd[2] frame.width=32 [ 12.891283@1]- fb: osd[2] frame.height=32 [ 12.891285@1]- fb: osd[2] out_addr_id =0x3 [ 12.896079@1]- fb: vpu clkc clock is 199 MHZ [ 12.896098@1]- fb: malloc_osd_memory, cma:ffffff800aec0698 [ 12.896100@1]- fb: malloc_osd_memory, 1224, base:0x0000000077800000, size:8388608 [ 12.896102@1]- fb: use ion buffer for fb memory, fb_index=3 [ 12.896104@1]- fb: OSD3 as afbcd mode,afbc_type=2 [ 12.899586@1]- meson-fb meson-fb: create ion_client ffffffc0dc03b240, handle=00000000ed71a454 [ 12.899592@1]- meson-fb meson-fb: ion memory(3): created fb at 0x00000000ea600000, size 8 MiB [ 12.899595@1]- fb: 3, phy: 0x00000000ea600000, vir:0xffffff8010d0b000, size=8192K [ 12.899595@1]- [ 12.899597@1]- fb: Frame buffer memory assigned at [ 12.899600@1]- fb: 3, phy: 0x00000000ea600000, vir:0xffffff8010d0b000, size=8192K [ 12.899600@1]- [ 12.899602@1]- fb: 3, phy: 0x00000000ea600000, vir:0xffffff8010d0b000, size=8192K [ 12.899602@1]- [ 12.899604@1]- fb: logo_index=0,fb_index=3 [ 12.899606@1]- fb: ---------------clear fb3 memory 00000000d9d41c7f [ 12.900659@1]- fb: osd[3] canvas.idx =0x42 [ 12.900660@1]- fb: osd[3] canvas.addr=0xea600000 [ 12.900662@1]- fb: osd[3] canvas.width=128 [ 12.900663@1]- fb: osd[3] canvas.height=32 [ 12.900665@1]- fb: osd[3] frame.width=32 [ 12.900666@1]- fb: osd[3] frame.height=32 [ 12.900667@1]- fb: osd[3] out_addr_id =0x4 [ 13.044871@1]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 13.045041@0]- tdm playback mute: 0, lane_cnt = 4 [ 13.045163@0]- tdm playback mute: 1, lane_cnt = 4 [ 13.045212@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 13.050197@0]- Not init audio effects [ 13.050337@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 13.051120@0]- tdm playback mute: 1, lane_cnt = 4 [ 13.051212@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 13.051999@0]- Not init audio effects [ 13.052333@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 13.053080@0]- tdm playback mute: 1, lane_cnt = 4 [ 13.053164@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 13.053998@0]- Not init audio effects [ 13.054844@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 13.055186@0]- tdm playback mute: 1, lane_cnt = 4 [ 13.055268@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 13.056244@0]- Not init audio effects [ 13.056382@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 13.056707@0]- tdm playback mute: 1, lane_cnt = 4 [ 13.056787@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 13.057781@0]- Not init audio effects [ 13.058521@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 13.058987@0]- tdm playback mute: 1, lane_cnt = 4 [ 13.059075@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 13.073508@2]- Not init audio effects [ 13.073636@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 13.074211@2]- tdm playback mute: 1, lane_cnt = 4 [ 13.074261@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 13.074683@2]- Not init audio effects [ 13.074777@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 13.075195@2]- tdm playback mute: 1, lane_cnt = 4 [ 13.075220@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 13.075635@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif [ 13.075822@2]- spdif_a keep clk continuous [ 13.075857@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif [ 13.076248@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 13.076704@2]- spdif_b keep clk continuous [ 13.076750@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 13.085068@0]- audio_dsp: buf=0 [ 13.085076@0]- audio_dsp: IEC958_mode_raw=0 [ 13.091057@0]- Not init audio effects [ 13.091219@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 13.093102@0]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 13.093110@0]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000ceabc8b0, id(2), clksel(2) [ 13.093112@0]- aml_tdm_set_fmt(), fmt not change [ 13.093119@0]- dump_pcm_setting(00000000ceabc8b0) [ 13.093120@0]- pcm_mode(1) [ 13.093121@0]- sysclk(11289600) [ 13.093122@0]- sysclk_bclk_ratio(4) [ 13.093123@0]- bclk(2822400) [ 13.093124@0]- bclk_lrclk_ratio(64) [ 13.093125@0]- lrclk(44100) [ 13.093126@0]- tx_mask(0x3) [ 13.093127@0]- rx_mask(0x3) [ 13.093129@0]- slots(2) [ 13.093130@0]- slot_width(32) [ 13.093131@0]- lane_mask_in(0x0) [ 13.093132@0]- lane_mask_out(0xf) [ 13.093133@0]- lane_oe_mask_in(0x0) [ 13.093134@0]- lane_oe_mask_out(0x0) [ 13.093135@0]- lane_lb_mask_in(0x0) [ 13.093137@0]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 13.093139@0]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 13.093145@0]- aml_set_bclk_ratio, select I2S mode [ 13.093393@0]- tdm playback mute: 0, lane_cnt = 4 [ 13.095712@0]- tdm playback mute: 0, lane_cnt = 4 [ 13.097532@0]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 14.974369@4]- cectx ff80023c.aocec: CEC framework ctrl enabled [ 41.044829@4]- VID: VD1 off [ 41.045736@4]- the demux clock on, ref cnt: 1 [ 41.045746@4]- the parser_top clock on, ref cnt: 1 [ 41.045749@4]- the vdec clock on, ref cnt: 1 [ 41.045771@4]- the clk_vdec_mux clock on, ref cnt: 1 [ 41.045853@4]- vdec mux clock is 499999992 Hz [ 41.045918@4]- vdec_create instance 00000000c6a6cecf, total 1, PM: legacy [ 41.046245@4]- The fw has been loaded. [ 41.046275@4]- the clk_hevc_mux clock on, ref cnt: 1 [ 41.046279@4]- the clk_hevcb_mux clock on, ref cnt: 1 [ 41.046351@4]- hevc mux clock is 499999992 Hz [ 41.046376@4]- hevc back mux clock is 499999992 Hz [ 41.046391@4]- vdec_init, dev_name:ammvdec_h264, vdec_type=VDEC_TYPE_FRAME_BLOCK id = 0 [ 41.046764@4]- ammvdec_h264_mmu_init tvp = 0x0 mmu_enable 0 [ 41.046767@4]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 41.046775@4]- 0: ammvdec_h264_probe mmu_enable 0 double_write_mode 0x0 [ 41.049104@4]- 0: ammvdec_h264 mem-addr=0,buff_offset=b8c10000,buf_start=b8c00000 [ 41.049177@4]- vdec mux clock is 666666656 Hz [ 41.049179@4]- vdec1 video changed to 3840 x 2160 60 fps clk->667MHZ [ 41.049182@4]- H264 sysinfo: 3840x1600 duration=4004, pts_outside=1 [ 41.049183@4]- sync_outside=0, use_idr_framerate=0, is_used_v4l: 0 [ 41.049216@4]- [LOCAL], the fw (h264_multi) will be loaded. [ 41.063016@0]- vh264_init, phy_addr=e264f000 vaddr=0000000071c5d8cb [ 41.067587@2]- vfm map vdec-map-0 created [ 41.067612@2]- ppmgr local_init [ 41.067619@2]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 41.067621@2]- dim:reg:ppmgr[1] [ 41.067687@2]- dim:reg:use[0]ms [ 41.067961@1]- ppmgr local_init [ 41.068415@0]- dim:ch[0]:di_receiver_event_fun,3:_START [ 41.068446@0]- vdec_init, vf_provider_name = vdec.h264.00, b 0 [ 41.074767@3]- vdec->port_flag=0x102, port_flag=0x103 [ 41.076159@5]- 0: AV_SCRATCH_1 = 855dc0f0, AV_SCRATCH_2 a062 [ 41.076245@5]- 0: chroma_format_idc = 1 frame_mbs_only_flag 1, crop_bottom 0, frame_height 1600, [ 41.076248@5]- 0: mb_height 100,crop_right 0, frame_width 3840, mb_width 240 [ 41.076251@5]- 0: level_idc = 51 pic_size = 9216000 size = 7 [ 41.076253@5]- 0: Warning: max_dec_frame_buffering(5) is less than DPB size(7) calculated from Profile/Level. [ 41.076256@5]- 0: mb height/widht/total: 64/f0/5dc0 level_idc 33 max_ref_num 5 [ 41.076258@5]- 0: restriction_flag=1, max_dec_frame_buffering=5, dec_dpb_size=7 num_reorder_frames 2 used_reorder_dpb_size_margin 6 [ 41.076261@5]- 0: vh264_set_params active_buf_spec_num 13 dec_dpb_size 7 collocate_buf_num 9 [ 41.304880@4]- 0: num_ref_frames change from 0 to 5 [ 41.348842@1]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 41.349091@5]- tdm playback mute: 0, lane_cnt = 4 [ 41.349205@3]- tdm playback mute: 1, lane_cnt = 4 [ 41.349291@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 41.351415@0]- audio_dsp: buf=2 [ 41.351423@0]- audio_dsp: IEC958_mode_raw=2 [ 41.357345@0]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 41.357359@0]- dim:3840x1600-0x9000. [ 41.357432@0]- dim:dim_nr_ds_init alloc nrds canvas 33. [ 41.370731@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 41.372150@2]- set 4x audio clk for 958 [ 41.372182@2]- set spdifout clk:98304000, mpll:393216000 [ 41.372184@2]- get spdifout clk:98303212, mpll:393212848 [ 41.372187@2]- set 4x audio clk for 958 [ 41.372194@2]- set spdifout clk:98304000, mpll:393216000 [ 41.372195@2]- get spdifout clk:98303212, mpll:393212848 [ 41.372328@2]- iec_info: rate: 192000, codec_type:0x8, channel status L:0x9001902, R:0x9001902 [ 41.372331@2]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 41.372332@2]- hdmitx: hw: set audio [ 41.372334@2]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 41.372347@2]- hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 41.372348@2]- hdmitx: hw: aud_n_para = 6272 [ 41.372355@2]- hdmitx: hw: set channel status [ 41.372368@2]- hdmitx: hw: [0x10e3] = 0x1f [ 41.372386@2]- hdmitx: audio: Audio Type: PCM [ 41.372387@2]- hdmitx: err chn msk, must larger than 0 [ 41.372391@2]- hdmitx: audio: aout notify format CT_DTS_HD [ 41.372392@2]- hdmitx: audio: aout notify channel num: 8 [ 41.372393@2]- hdmitx: hw: set audio [ 41.372394@2]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 7, hdev->aud_output_ch = 0 [ 41.372404@2]- hdmitx: fs = 7, cd = 4, tmds_clk = 148500 [ 41.372405@2]- hdmitx: hw: aud_n_para = 24576 [ 41.372412@2]- hdmitx: hw: set channel status [ 41.372425@2]- hdmitx: hw: [0x10e3] = 0x1f [ 41.372442@2]- hdmitx: audio: set audio param [ 41.372445@2]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 41.372741@1]- iec_info: rate: 192000, codec_type:0x8, channel status L:0x9001902, R:0x9001902 [ 41.372749@1]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 41.372750@1]- hdmitx: err chn msk, must larger than 0 [ 41.372755@1]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 41.374700@2]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 41.375841@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:1(S) [ 41.375849@0]h pcr:0x0,param:0x43b5976,vpts:0x0,apts:0xffffffff [ 41.375852@0]h video first pts = 43b5976 [ 41.410917@4]- cal_dur_from_pts vstatus 4004 dur3780 -> 4032, revised 4032 [ 41.450416@4]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=4032 [ 41.966921@3]- vout: vmode set to null [ 41.967002@3]- fb: current vmode=1080p50hz, cmd: 0x10000 [ 41.967005@3]- vlock: event MODE_CHANGE_PRE 0 [ 41.967045@3]- vout: new mode null set ok [ 41.967047@3]- fb: current vmode=null, cmd: 0x20000 [ 41.967162@3]- hdmitx: system: set frac_rate_policy as 1 [ 41.967188@3]- vout: vmode set to 2160p60hz [ 41.967214@3]- fb: current vmode=null, cmd: 0x10000 [ 41.967218@3]- hdmitx: hdmitx_set_current_vmode[5442] [ 41.967220@3]- hdmitx: system: recalc before 2160p60hz 60 1, frac 0 [ 41.967222@3]- hdmitx: system: recalc after 2160p60hz 2997 50, frac 1 [ 41.967224@3]- hdmitx: hdmitx: display colourdepth was 8 in cur_param 0x0ad320b8 (VIC: 31) [ 41.967225@3]- hdmitx: system: get current mode: 2160p60hz [ 41.967226@3]- hdmitx: system: update physical size: 1150 650 [ 41.967231@3]- hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0ad320b8 (VIC: 31) [ 41.967233@3]- hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 41.967700@3]- hdmitx: video: already init VIC = 0 Now VIC = 97 [ 41.967706@3]- hdmitx: hw: div40: 0 [ 41.995629@3]- hdmitx: E: ddc w1b 0x54 0x20 0x00 [ 41.995636@3]- hdmitx: frac_rate = 1 [ 41.995638@3]- hdmitx: hdmitx: set clk: VIC = 353 cd = 4 cs = 3 frac_rate = 1 [ 41.995641@3]- hdmitx: config HPLL = 5940000 frac_rate = 1 [ 41.995696@3]- hdmitx: HPLLv1: 0xdb3a04f7 [ 41.995697@3]- hdmitx: config HPLL done [ 41.995700@3]- hdmitx: set_hpll_od3_clk_div[687] div = 6 [ 41.995705@3]- hdmitx: j = 10 vid_clk_div = 1 [ 41.995715@3]- hdmitx: set enc for VIC: 97 [ 42.037640@3]- hdmitx: hw: config hdmitx IP vic = 97 cd:4 cs: 3 [ 42.047743@3]- hdmitx: video: Sink is HDMI device [ 42.047776@3]- hdmitx: hw: set audio [ 42.047783@3]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 7, hdev->aud_output_ch = 0 [ 42.047794@3]- hdmitx: fs = 7, cd = 4, tmds_clk = 593407 [ 42.047796@3]- hdmitx: hw: aud_n_para = 23296 [ 42.047803@3]- hdmitx: hw: set channel status [ 42.047815@3]- hdmitx: hw: [0x10e3] = 0x1f [ 42.047836@3]- hdmitx: system: update rx hdr info 0 [ 42.047838@3]- vout: new mode 2160p60hz set ok [ 42.047842@3]- fb: current vmode=2160p60hz, cmd: 0x20000 [ 42.047848@3]- fb: outputmode changed to 2160p60hz, reset osd0, (0, 0, 1919, 1079) -> (0, 0, 3839, 2159) [ 42.047973@0]h hdmitx: system: irq 80000001 0 [ 42.048265@5]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 42.048268@5]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 42.081639@2]- fb: osd[0] enable: 1 (kodi.bin) [ 42.098320@1]- fb: osd_update_disp_axis_hw:pan_data(0,1080,1919,2159) [ 42.098322@1]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 42.114976@2]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 42.114978@2]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 42.131671@4]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 42.131673@4]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 42.148331@3]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 42.148334@3]- vlock: event MODE_CHANGE [ 42.149840@4]- hdmitx: [0x10000103]: 0x00000008 [ 42.149846@4]- hdmitx: [0x10000104]: 0x00000001 [ 42.149849@4]- hdmitx: [0x10000170]: 0x00000010 [ 42.149851@4]- hdmitx: [0x10000180]: 0x000000ff [ 42.149852@4]- hdmitx: [0x10000181]: 0x000000ff [ 42.149854@4]- hdmitx: [0x10000182]: 0x00000003 [ 42.149855@4]- hdmitx: [0x10000183]: 0x00000007 [ 42.149856@4]- hdmitx: [0x10000184]: 0x0000003f [ 42.149857@4]- hdmitx: [0x10000185]: 0x00000002 [ 42.149859@4]- hdmitx: [0x10000187]: 0x000000ff [ 42.149860@4]- hdmitx: [0x10000188]: 0x00000003 [ 42.164943@0]h detect vout mode change!!!!!!!!!!!! [ 62.477615@2]- fb: mem_free_work, free memory: addr:800000 [ 68.753202@0]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 68.754047@2]- PPMGRVPP: info: task: quit [ 68.754085@0]- ppmgr local_init [ 68.754095@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 68.754106@0]- disabled amvideo on vd1 for next before free keep buffer! [ 68.754107@0]- VID: VD1 off [ 68.754110@0]- keep exit is skip current [ 68.754115@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:0, black_out:1, cur_dispbuf:00000000314af862 [ 68.754118@0]d video first pts = 0 [ 68.754120@0]- keep frame skip, disable video again. [ 68.754122@0]- disabled amvideo on vd1 for next before free keep buffer! [ 68.754123@0]- VID: VD1 off [ 68.754124@0]- VD1 AFBC 0x0. [ 68.754127@0]- pattern detected = 0, pts_enter_pattern_cnt =10, pts_exit_pattern_cnt =10 [ 68.754174@0]- dim:unreg:2keep[0], msk:[0x0,0x0] [ 68.766454@0]- dim:unreg:use[12]ms [ 68.766480@0]- vdec_disable_DMC input->target= 0x0 [ 68.766578@0]- 0: vh264_stop [ 68.773492@0]- vdec_release instance 00000000c6a6cecf, total 1 id = 0 [ 68.774095@0]- the clk_hevc_mux clock off, ref cnt: 0 [ 68.774100@0]- the clk_hevcb_mux clock off, ref cnt: 0 [ 68.774105@0]- the clk_vdec_mux clock off, ref cnt: 0 [ 68.774110@0]- the vdec clock off, ref cnt: 0 [ 68.774113@0]- the parser_top clock off, ref cnt: 0 [ 68.774116@0]- the demux clock off, ref cnt: 0 [ 68.775106@0]- VID: VD1 off [ 68.809636@1]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 68.809698@1]- iec_info: rate: 192000, codec_type:0x8, channel status L:0x9001902, R:0x9001902 [ 68.809702@1]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 68.809703@1]- hdmitx: err chn msk, must larger than 0 [ 68.809708@1]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 68.810004@1]- spdif_b keep clk continuous [ 68.810083@1]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 68.841398@3]- audio_dsp: buf=0 [ 68.841403@3]- audio_dsp: IEC958_mode_raw=0 [ 68.845076@3]- Not init audio effects [ 68.845238@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 68.850962@0]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 68.850969@0]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000ceabc8b0, id(2), clksel(2) [ 68.850971@0]- aml_tdm_set_fmt(), fmt not change [ 68.850977@0]- dump_pcm_setting(00000000ceabc8b0) [ 68.850978@0]- pcm_mode(1) [ 68.850979@0]- sysclk(11289600) [ 68.850980@0]- sysclk_bclk_ratio(4) [ 68.850981@0]- bclk(2822400) [ 68.850982@0]- bclk_lrclk_ratio(64) [ 68.850983@0]- lrclk(44100) [ 68.850985@0]- tx_mask(0x3) [ 68.850986@0]- rx_mask(0x3) [ 68.850987@0]- slots(2) [ 68.850988@0]- slot_width(32) [ 68.850989@0]- lane_mask_in(0x0) [ 68.850990@0]- lane_mask_out(0xf) [ 68.850991@0]- lane_oe_mask_in(0x0) [ 68.850992@0]- lane_oe_mask_out(0x0) [ 68.850994@0]- lane_lb_mask_in(0x0) [ 68.850996@0]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 68.850998@0]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 68.851004@0]- aml_set_bclk_ratio, select I2S mode [ 68.851106@0]- hdmitx: hw: set audio [ 68.851110@0]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 7, hdev->aud_output_ch = 33 [ 68.851124@0]- hdmitx: fs = 7, cd = 4, tmds_clk = 593407 [ 68.851126@0]- hdmitx: hw: aud_n_para = 23296 [ 68.851133@0]- hdmitx: hw: set channel status [ 68.877651@1]- hdmitx: hw: [0x10e3] = 0x1f [ 68.877677@1]- hdmitx: audio: aout notify format CT_PCM [ 68.877679@1]- hdmitx: audio: aout notify channel num: 2 [ 68.877681@1]- hdmitx: hw: set audio [ 68.877683@1]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 68.877695@1]- hdmitx: fs = 2, cd = 4, tmds_clk = 593407 [ 68.877697@1]- hdmitx: hw: aud_n_para = 8918 [ 68.877704@1]- hdmitx: hw: set channel status [ 68.877717@1]- hdmitx: hw: [0x10e3] = 0x1f [ 68.877735@1]- hdmitx: audio: Audio Type: PCM [ 68.877737@1]- hdmitx: audio: set audio param [ 68.877886@1]- tdm playback mute: 0, lane_cnt = 4 [ 68.878158@1]- tdm playback mute: 0, lane_cnt = 4 [ 68.880110@1]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 68.890935@3]- vout: vmode set to null [ 68.891015@3]- fb: current vmode=2160p60hz, cmd: 0x10000 [ 68.891019@3]- vlock: event MODE_CHANGE_PRE 0 [ 68.891056@3]- vout: new mode null set ok [ 68.891058@3]- fb: current vmode=null, cmd: 0x20000 [ 68.891117@3]- hdmitx: system: set frac_rate_policy as 0 [ 68.891138@3]- vout: vmode set to 1080p50hz [ 68.891159@3]- fb: current vmode=null, cmd: 0x10000 [ 68.891163@3]- hdmitx: hdmitx_set_current_vmode[5442] [ 68.891165@3]- hdmitx: system: recalc before 1080p50hz 50 1, frac 0 [ 68.891167@3]- hdmitx: system: recalc after 1080p50hz 50 1, frac 0 [ 68.891170@3]- hdmitx: hdmitx: display colourdepth was 8 in cur_param 0x0ad322c0 (VIC: 97) [ 68.891171@3]- hdmitx: system: get current mode: 1080p50hz [ 68.891173@3]- hdmitx: system: update physical size: 1150 650 [ 68.891178@3]- hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0ad322c0 (VIC: 97) [ 68.891197@3]- hdmitx: video: already init VIC = 0 Now VIC = 31 [ 68.891199@3]- hdmitx: hw: div40: 0 [ 68.923625@0]- hdmitx: E: ddc w1b 0x54 0x20 0x00 [ 68.923633@0]- hdmitx: this mode doesn't have frac_rate [ 68.923635@0]- hdmitx: frac_rate = 0 [ 68.923637@0]- hdmitx: hdmitx: set clk: VIC = 31 cd = 5 cs = 2 frac_rate = 0 [ 68.923642@0]- hdmitx: config HPLL = 3712500 frac_rate = 0 [ 68.923696@0]- hdmitx: HPLL: 0xdb00049a [ 68.923698@0]- hdmitx: config HPLL done [ 68.923702@0]- hdmitx: set_hpll_od3_clk_div[687] div = 8 [ 68.923707@0]- hdmitx: j = 4 vid_clk_div = 1 [ 68.923717@0]- hdmitx: set enc for VIC: 31 [ 68.965628@0]- hdmitx: hw: config hdmitx IP vic = 31 cd:5 cs: 2 [ 68.975722@3]- hdmitx: video: Sink is HDMI device [ 68.975754@3]- hdmitx: hw: set audio [ 68.975760@3]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 68.975770@3]- hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 68.975771@3]- hdmitx: hw: aud_n_para = 6272 [ 68.975779@3]- hdmitx: hw: set channel status [ 68.976436@0]h hdmitx: system: irq 80000001 0 [ 69.001622@0]- hdmitx: hw: [0x10e3] = 0x1f [ 69.001643@0]- hdmitx: audio: Audio Type: PCM [ 69.001647@0]- hdmitx: system: update rx hdr info 0 [ 69.001650@0]- vout: new mode 1080p50hz set ok [ 69.001654@0]- fb: current vmode=1080p50hz, cmd: 0x20000 [ 69.001660@0]- fb: outputmode changed to 1080p50hz, reset osd0, (0, 0, 3839, 2159) -> (0, 0, 1919, 1079) [ 69.015826@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 69.015829@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 69.055787@0]- fb: osd[0] enable: 1 (kodi.bin) [ 69.075812@0]- fb: osd_update_disp_axis_hw:pan_data(0,1080,1919,2159) [ 69.075814@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 69.077626@0]- hdmitx: [0x10000103]: 0x00000008 [ 69.077628@0]- hdmitx: [0x10000104]: 0x00000001 [ 69.077631@0]- hdmitx: [0x10000170]: 0x00000010 [ 69.077633@0]- hdmitx: [0x10000180]: 0x000000ff [ 69.077634@0]- hdmitx: [0x10000181]: 0x000000ff [ 69.077636@0]- hdmitx: [0x10000182]: 0x00000003 [ 69.077637@0]- hdmitx: [0x10000183]: 0x00000007 [ 69.077639@0]- hdmitx: [0x10000184]: 0x0000003f [ 69.077640@0]- hdmitx: [0x10000185]: 0x00000002 [ 69.077642@0]- hdmitx: [0x10000187]: 0x000000ff [ 69.077643@0]- hdmitx: [0x10000188]: 0x00000003 [ 69.095820@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 69.095822@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 69.115830@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 69.115831@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 69.135822@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 69.135826@0]- vlock: event MODE_CHANGE [ 207.580053@1]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 207.580254@1]- tdm playback mute: 0, lane_cnt = 4 [ 207.580327@1]- tdm playback mute: 1, lane_cnt = 4 [ 207.580396@1]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 209.563814@1]- cectx ff80023c.aocec: CEC framework ctrl disabled [ 209.895394@2]- fb: osd_release now.index=0,open_count=1 [ 209.895407@2]- fb: osd_release now.index=1,open_count=1 [ 209.895413@2]- fb: osd_release now.index=2,open_count=1 [ 209.895418@2]- fb: osd_release now.index=3,open_count=1 [ 212.806176@2]- Not init audio effects [ 212.806351@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 212.807193@0]- tdm playback mute: 1, lane_cnt = 4 [ 212.807288@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 212.808082@0]- Not init audio effects [ 212.808215@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 212.808954@0]- tdm playback mute: 1, lane_cnt = 4 [ 212.809041@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 212.809858@0]- Not init audio effects [ 212.810473@1]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 212.810784@1]- tdm playback mute: 1, lane_cnt = 4 [ 212.810848@1]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 212.811682@1]- Not init audio effects [ 212.811809@1]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 212.812108@1]- tdm playback mute: 1, lane_cnt = 4 [ 212.812165@1]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 212.813019@1]- Not init audio effects [ 212.813147@1]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 212.813569@1]- tdm playback mute: 1, lane_cnt = 4 [ 212.814408@1]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 212.830542@2]- Not init audio effects [ 212.830651@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 212.831266@2]- tdm playback mute: 1, lane_cnt = 4 [ 212.831306@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 212.831731@2]- Not init audio effects [ 212.831795@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 212.832215@2]- tdm playback mute: 1, lane_cnt = 4 [ 212.832241@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 212.832662@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif [ 212.832864@2]- spdif_a keep clk continuous [ 212.832888@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif [ 212.833278@2]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 212.833876@2]- spdif_b keep clk continuous [ 212.833911@2]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 212.838857@0]- audio_dsp: buf=0 [ 212.838864@0]- audio_dsp: IEC958_mode_raw=0 [ 212.844510@0]- Not init audio effects [ 212.844646@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 212.846511@0]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 212.846519@0]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000ceabc8b0, id(2), clksel(2) [ 212.846521@0]- aml_tdm_set_fmt(), fmt not change [ 212.846527@0]- dump_pcm_setting(00000000ceabc8b0) [ 212.846528@0]- pcm_mode(1) [ 212.846529@0]- sysclk(11289600) [ 212.846530@0]- sysclk_bclk_ratio(4) [ 212.846531@0]- bclk(2822400) [ 212.846532@0]- bclk_lrclk_ratio(64) [ 212.846534@0]- lrclk(44100) [ 212.846535@0]- tx_mask(0x3) [ 212.846536@0]- rx_mask(0x3) [ 212.846537@0]- slots(2) [ 212.846538@0]- slot_width(32) [ 212.846539@0]- lane_mask_in(0x0) [ 212.846541@0]- lane_mask_out(0xf) [ 212.846542@0]- lane_oe_mask_in(0x0) [ 212.846543@0]- lane_oe_mask_out(0x0) [ 212.846544@0]- lane_lb_mask_in(0x0) [ 212.846546@0]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 212.846548@0]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 212.846554@0]- aml_set_bclk_ratio, select I2S mode [ 212.848354@0]- tdm playback mute: 0, lane_cnt = 4 [ 212.848712@0]- tdm playback mute: 0, lane_cnt = 4 [ 212.851424@0]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 213.151671@0]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 213.151810@4]- tdm playback mute: 0, lane_cnt = 4 [ 213.151894@4]- tdm playback mute: 1, lane_cnt = 4 [ 213.151950@4]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 213.154716@4]- Not init audio effects [ 213.154813@4]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 213.155297@4]- tdm playback mute: 1, lane_cnt = 4 [ 213.155328@4]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 213.155930@4]- Not init audio effects [ 213.156016@5]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 213.156467@5]- tdm playback mute: 1, lane_cnt = 4 [ 213.156505@5]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 213.156995@5]- Not init audio effects [ 213.157081@4]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 213.157234@4]- tdm playback mute: 1, lane_cnt = 4 [ 213.157264@4]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 213.157904@4]- Not init audio effects [ 213.157997@3]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 213.158178@3]- tdm playback mute: 1, lane_cnt = 4 [ 213.158215@3]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 213.158897@4]- Not init audio effects [ 213.158986@5]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 213.159246@5]- tdm playback mute: 1, lane_cnt = 4 [ 213.159279@5]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 213.168608@5]- Not init audio effects [ 213.168707@5]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 213.169414@5]- tdm playback mute: 1, lane_cnt = 4 [ 213.169456@5]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 213.170101@4]- Not init audio effects [ 213.170183@4]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 213.170717@4]- tdm playback mute: 1, lane_cnt = 4 [ 213.170750@4]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 213.171410@4]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif [ 213.171675@4]- spdif_a keep clk continuous [ 213.171702@4]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif [ 213.172222@4]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 213.172839@4]- spdif_b keep clk continuous [ 213.172878@4]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 213.176484@3]- audio_dsp: buf=0 [ 213.176489@3]- audio_dsp: IEC958_mode_raw=0 [ 213.179855@5]- Not init audio effects [ 213.179950@5]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:i2s2hdmi [ 213.181083@5]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 213.181088@5]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000ceabc8b0, id(2), clksel(2) [ 213.181089@5]- aml_tdm_set_fmt(), fmt not change [ 213.181093@5]- dump_pcm_setting(00000000ceabc8b0) [ 213.181095@5]- pcm_mode(1) [ 213.181096@5]- sysclk(11289600) [ 213.181097@5]- sysclk_bclk_ratio(4) [ 213.181097@5]- bclk(2822400) [ 213.181098@5]- bclk_lrclk_ratio(64) [ 213.181099@5]- lrclk(44100) [ 213.181100@5]- tx_mask(0x3) [ 213.181100@5]- rx_mask(0x3) [ 213.181101@5]- slots(2) [ 213.181102@5]- slot_width(32) [ 213.181103@5]- lane_mask_in(0x0) [ 213.181104@5]- lane_mask_out(0xf) [ 213.181104@5]- lane_oe_mask_in(0x0) [ 213.181105@5]- lane_oe_mask_out(0x0) [ 213.181106@5]- lane_lb_mask_in(0x0) [ 213.181107@5]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 213.181109@5]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 213.181114@5]- aml_set_bclk_ratio, select I2S mode [ 213.181392@0]- tdm playback mute: 0, lane_cnt = 4 [ 213.183399@4]- tdm playback mute: 0, lane_cnt = 4 [ 213.184738@5]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 213.858148@3]- cectx ff80023c.aocec: CEC framework ctrl enabled [ 273.228521@2]- VID: VD1 off [ 273.228952@2]- the demux clock on, ref cnt: 1 [ 273.228957@2]- the parser_top clock on, ref cnt: 1 [ 273.228960@2]- the vdec clock on, ref cnt: 1 [ 273.228982@2]- the clk_vdec_mux clock on, ref cnt: 1 [ 273.229000@2]- vdec mux clock is 499999992 Hz [ 273.229042@2]- vdec_create instance 00000000d28a00fb, total 1, PM: legacy [ 273.229190@2]- The fw has been loaded. [ 273.229207@2]- the clk_hevc_mux clock on, ref cnt: 1 [ 273.229209@2]- the clk_hevcb_mux clock on, ref cnt: 1 [ 273.229266@2]- hevc mux clock is 499999992 Hz [ 273.229288@2]- hevc back mux clock is 499999992 Hz [ 273.229302@2]- vdec_init, dev_name:ammvdec_h264, vdec_type=VDEC_TYPE_FRAME_BLOCK id = 0 [ 273.229674@2]- ammvdec_h264_mmu_init tvp = 0x0 mmu_enable 0 [ 273.229678@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 273.229683@2]- 0: ammvdec_h264_probe mmu_enable 0 double_write_mode 0x0 [ 273.232327@2]- 0: ammvdec_h264 mem-addr=0,buff_offset=b8c10000,buf_start=b8c00000 [ 273.232351@2]- vdec mux clock is 666666656 Hz [ 273.232353@2]- vdec1 video changed to 3840 x 2160 60 fps clk->667MHZ [ 273.232357@2]- H264 sysinfo: 3840x1600 duration=4004, pts_outside=1 [ 273.232358@2]- sync_outside=0, use_idr_framerate=0, is_used_v4l: 0 [ 273.232389@2]- [LOCAL], the fw (h264_multi) will be loaded. [ 273.232582@2]- vh264_init, phy_addr=e264f000 vaddr=000000006798cbe4 [ 273.232684@2]- vfm map vdec-map-0 created [ 273.232700@2]- ppmgr local_init [ 273.232707@2]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 273.232708@2]- dim:reg:ppmgr[2] [ 273.233241@2]- dim:reg:use[1]ms [ 273.233358@5]- ppmgr local_init [ 273.233407@5]- dim:ch[0]:di_receiver_event_fun,3:_START [ 273.233420@5]- vdec_init, vf_provider_name = vdec.h264.00, b 0 [ 273.237372@5]- vdec->port_flag=0x102, port_flag=0x103 [ 273.239380@5]- 0: AV_SCRATCH_1 = 855dc0f0, AV_SCRATCH_2 a062 [ 273.239484@5]- 0: chroma_format_idc = 1 frame_mbs_only_flag 1, crop_bottom 0, frame_height 1600, [ 273.239487@5]- 0: mb_height 100,crop_right 0, frame_width 3840, mb_width 240 [ 273.239490@5]- 0: level_idc = 51 pic_size = 9216000 size = 7 [ 273.239492@5]- 0: Warning: max_dec_frame_buffering(5) is less than DPB size(7) calculated from Profile/Level. [ 273.239495@5]- 0: mb height/widht/total: 64/f0/5dc0 level_idc 33 max_ref_num 5 [ 273.239498@5]- 0: restriction_flag=1, max_dec_frame_buffering=5, dec_dpb_size=7 num_reorder_frames 2 used_reorder_dpb_size_margin 6 [ 273.239500@5]- 0: vh264_set_params active_buf_spec_num 13 dec_dpb_size 7 collocate_buf_num 9 [ 273.400007@4]- 0: num_ref_frames change from 0 to 5 [ 273.457196@0]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 273.457212@0]- dim:3840x1600-0x9000. [ 273.475749@0]h detect vout mode change!!!!!!!!!!!! [ 273.475773@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:0(S) [ 273.475777@0]h pcr:0x0,param:0x0,vpts:0x0,apts:0xffffffff [ 273.486115@1]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 273.488875@0]- tdm playback mute: 0, lane_cnt = 4 [ 273.489916@0]- tdm playback mute: 1, lane_cnt = 4 [ 273.489990@0]- audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:i2s2hdmi [ 273.490538@0]- audio_dsp: buf=2 [ 273.490544@0]- audio_dsp: IEC958_mode_raw=2 [ 273.494201@4]- cal_dur_from_pts vstatus 4004 dur3690 -> 3936, revised 3936 [ 273.494205@4]- wr=2,slot=2 pts 7470, 3780, 0 [ 273.498887@0]- audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 273.511586@0]- set 4x audio clk for 958 [ 273.511641@0]- set spdifout clk:98304000, mpll:393216000 [ 273.511644@0]- get spdifout clk:98303212, mpll:393212848 [ 273.511652@0]- set 4x audio clk for 958 [ 273.511663@0]- set spdifout clk:98304000, mpll:393216000 [ 273.511665@0]- get spdifout clk:98303212, mpll:393212848 [ 273.511846@0]- iec_info: rate: 192000, codec_type:0x8, channel status L:0x9001902, R:0x9001902 [ 273.511852@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 273.511854@0]- hdmitx: hw: set audio [ 273.511857@0]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 273.511871@0]- hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 273.511874@0]- hdmitx: hw: aud_n_para = 6272 [ 273.511882@0]- hdmitx: hw: set channel status [ 273.511894@0]- hdmitx: hw: [0x10e3] = 0x1f [ 273.511913@0]- hdmitx: audio: Audio Type: PCM [ 273.511915@0]- hdmitx: err chn msk, must larger than 0 [ 273.511919@0]- hdmitx: audio: aout notify format CT_DTS_HD [ 273.511921@0]- hdmitx: audio: aout notify channel num: 8 [ 273.511922@0]- hdmitx: hw: set audio [ 273.511924@0]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 7, hdev->aud_output_ch = 0 [ 273.511935@0]- hdmitx: fs = 7, cd = 4, tmds_clk = 148500 [ 273.511936@0]- hdmitx: hw: aud_n_para = 24576 [ 273.511944@0]- hdmitx: hw: set channel status [ 273.511956@0]- hdmitx: hw: [0x10e3] = 0x1f [ 273.511975@0]- hdmitx: audio: set audio param [ 273.511978@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 273.512437@0]- iec_info: rate: 192000, codec_type:0x8, channel status L:0x9001902, R:0x9001902 [ 273.512446@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 273.512448@0]- hdmitx: err chn msk, must larger than 0 [ 273.512454@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 273.514165@0]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 273.538218@4]- cal_dur_from_pts vstatus 4004 dur3780 -> 4032, revised 4032 [ 273.538224@4]- wr=3,slot=3 pts 11250, 7470, 3780 [ 273.538278@4]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=3984 [ 274.285026@2]- vout: vmode set to null [ 274.285115@2]- fb: current vmode=1080p50hz, cmd: 0x10000 [ 274.285118@2]- vlock: event MODE_CHANGE_PRE 0 [ 274.285155@2]- vout: new mode null set ok [ 274.285156@2]- fb: current vmode=null, cmd: 0x20000 [ 274.285213@2]- hdmitx: system: set frac_rate_policy as 1 [ 274.285234@2]- vout: vmode set to 2160p60hz [ 274.285255@2]- fb: current vmode=null, cmd: 0x10000 [ 274.285258@2]- hdmitx: hdmitx_set_current_vmode[5442] [ 274.285259@2]- hdmitx: system: recalc before 2160p60hz 2997 50, frac 1 [ 274.285262@2]- hdmitx: system: recalc after 2160p60hz 2997 50, frac 1 [ 274.285265@2]- hdmitx: hdmitx: display colourdepth was 10 in cur_param 0x0ad320b8 (VIC: 31) [ 274.285265@2]- hdmitx: system: get current mode: 2160p60hz [ 274.285267@2]- hdmitx: system: update physical size: 1150 650 [ 274.285272@2]- hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0ad320b8 (VIC: 31) [ 274.285273@2]- hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 274.285293@2]- hdmitx: video: already init VIC = 0 Now VIC = 97 [ 274.285295@2]- hdmitx: hw: div40: 0 [ 274.315621@2]- hdmitx: E: ddc w1b 0x54 0x20 0x00 [ 274.315627@2]- hdmitx: frac_rate = 1 [ 274.315629@2]- hdmitx: hdmitx: set clk: VIC = 353 cd = 4 cs = 3 frac_rate = 1 [ 274.315633@2]- hdmitx: config HPLL = 5940000 frac_rate = 1 [ 274.315687@2]- hdmitx: HPLLv1: 0xdb3a04f7 [ 274.315688@2]- hdmitx: config HPLL done [ 274.315691@2]- hdmitx: set_hpll_od3_clk_div[687] div = 6 [ 274.315695@2]- hdmitx: j = 10 vid_clk_div = 1 [ 274.315705@2]- hdmitx: set enc for VIC: 97 [ 274.357672@5]- hdmitx: hw: config hdmitx IP vic = 97 cd:4 cs: 3 [ 274.368056@5]- hdmitx: video: Sink is HDMI device [ 274.369273@5]- hdmitx: hw: set audio [ 274.369291@5]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 7, hdev->aud_output_ch = 0 [ 274.369308@5]- hdmitx: fs = 7, cd = 4, tmds_clk = 593407 [ 274.369311@5]- hdmitx: hw: aud_n_para = 23296 [ 274.369318@5]- hdmitx: hw: set channel status [ 274.369331@5]- hdmitx: hw: [0x10e3] = 0x1f [ 274.369356@5]- hdmitx: system: update rx hdr info 0 [ 274.369368@5]- vout: new mode 2160p60hz set ok [ 274.369377@5]- fb: current vmode=2160p60hz, cmd: 0x20000 [ 274.369392@5]- fb: outputmode changed to 2160p60hz, reset osd0, (0, 0, 1919, 1079) -> (0, 0, 3839, 2159) [ 274.385228@2]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 274.385232@2]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 274.418601@2]- fb: osd[0] enable: 1 (kodi.bin) [ 274.435274@2]- fb: osd_update_disp_axis_hw:pan_data(0,1080,1919,2159) [ 274.435275@2]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 274.451960@2]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 274.451962@2]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 274.468646@2]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 274.468647@2]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 274.485354@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 274.485357@0]- vlock: event MODE_CHANGE [ 274.501928@0]h detect vout mode change!!!!!!!!!!!! CoreELEC:~ #