[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.193-perf-g1011f5b (builder@c4-miui-ota-bd26.bj) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 30 20:54:07 CST 2020 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Olive QRD [ 0.000000] Powerup reason=0x40021 [ 0.000000] OF: fdt:Powerup reason 0x40021 [ 0.000000] Reserved memory: created CMA memory pool at 0x8f800000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0xff800000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0xf8800000, size 112 MiB [ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x8f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node. [ 0.000000] Reserved memory: created CMA memory pool at 0xf7800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0xf6800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x84a00000, size 29 MiB [ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x86800000, size 85 MiB [ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x8bd00000, size 24 MiB [ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x8d500000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x9ff00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node pstore_reserve_mem_region@0, compatible id removed-dma-pool [ 0.000000] cma: Reserved 16 MiB at 0xf5800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 749055 [ 0.000000] free_area_init_node: node 0, pgdat c1959bc0, node_mem_map eb0f9000 [ 0.000000] Normal zone: 1611 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 183296 pages, LIFO batch:31 [ 0.000000] HighMem zone: 565759 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] Did not receive the expected number of bytes from PRNG: 0 [ 0.000000] percpu: max_distance=0x80000 too large for vmalloc space 0x0 [ 0.000000] percpu: Embedded 16 pages/cpu s33036 r8192 d24308 u65536 [ 0.000000] pcpu-alloc: s33036 r8192 d24308 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747444 [ 0.000000] Kernel command line: sched_enable_hmp=1 kpti=0 console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 androidboot.hardware=qcom user_debug=30 msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci androidboot.usbconfigfs=true androidboot.selinux=permissive androidboot.configfs=true lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78B0000 vmalloc=300M firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 android.boot.selinux=permissive buildvariant=eng androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.keymaster=1 root=PARTUUID=7d7717f8-fc70-bd02-d7b2-5c9c54ba7b69 androidboot.serialno=39b2a4210606 androidboot.secureboot=1 androidboot.dp=0x0 androidboot.efuse=1 gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi rootwait ro init=/init androidboot.dtbo_idx=6 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2718988K/2996220K available (15360K kernel code, 2464K rwdata, 5000K rodata, 1024K init, 2766K bss, 92912K reserved, 184320K cma-reserved, 2058236K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xecc00000 - 0xff800000 ( 300 MB) [ 0.000000] lowmem : 0xc0000000 - 0xecc00000 ( 716 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (16352 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (2465 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (2767 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] [ 0.000000] ********************************************************** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ** ** [ 0.000000] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000] ** ** [ 0.000000] ** This means that this is a DEBUG kernel and it is ** [ 0.000000] ** unsafe for production use. ** [ 0.000000] ** ** [ 0.000000] ** If you see this message and you are not debugging ** [ 0.000000] ** the kernel, report this immediately to your vendor! ** [ 0.000000] ** ** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ********************************************************** [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000020] clocksource: Switched to clocksource arch_sys_counter [ 0.000032] Switching to timer-based delay loop, resolution 52ns [ 0.001344] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001359] pid_max: default: 32768 minimum: 301 [ 0.001468] Security Framework initialized [ 0.001477] SELinux: Initializing. [ 0.001519] SELinux: Starting in permissive mode [ 0.001555] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001566] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002322] CPU: Testing write buffer coherency: ok [ 0.002351] ftrace: allocating 41203 entries in 121 pages [ 0.115122] /cpus/cpu@100 missing clock-frequency property [ 0.115140] /cpus/cpu@101 missing clock-frequency property [ 0.115152] /cpus/cpu@102 missing clock-frequency property [ 0.115165] /cpus/cpu@103 missing clock-frequency property [ 0.115179] /cpus/cpu@0 missing clock-frequency property [ 0.115194] /cpus/cpu@1 missing clock-frequency property [ 0.115211] /cpus/cpu@2 missing clock-frequency property [ 0.115228] /cpus/cpu@3 missing clock-frequency property [ 0.115354] sched-energy: Sched-energy-costs installed from DT [ 0.115363] CPU0: update cpu_capacity 1024 [ 0.118829] Setting up static identity map for 0x40100000 - 0x40100058 [ 0.126259] cpu_clock_a53_init_little: A53 Power clocks configured [ 0.126756] MSM Memory Dump base table set up [ 0.126777] MSM Memory Dump apps data table set up [ 0.138094] CPU1: update cpu_capacity 1024 [ 0.146980] CPU2: update cpu_capacity 1024 [ 0.155781] CPU3: update cpu_capacity 1024 [ 0.164786] CPU4: update cpu_capacity 1024 [ 0.173887] CPU5: update cpu_capacity 1024 [ 0.182985] CPU6: update cpu_capacity 1024 [ 0.192123] CPU7: update cpu_capacity 1024 [ 0.192542] Brought up 8 CPUs [ 0.192575] SMP: Total of 8 processors activated (307.20 BogoMIPS). [ 0.192581] CPU: All CPU(s) started in SVC mode. [ 0.192664] CPU7: update max cpu_capacity 1024 [ 0.200074] CPU7: update max cpu_capacity 1024 [ 0.288459] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.289079] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.289097] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.298232] pinctrl core: initialized pinctrl subsystem [ 0.299374] NET: Registered protocol family 16 [ 0.302818] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.302826] schedtune: init normalization constants... [ 0.302837] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 120 [ 0.302846] schedtune: CPU[0] min_pwr: 40 max_pwr: 470 [ 0.302855] schedtune: CPU[1] min_pwr: 40 max_pwr: 470 [ 0.302863] schedtune: CPU[2] min_pwr: 40 max_pwr: 470 [ 0.302871] schedtune: CPU[3] min_pwr: 40 max_pwr: 470 [ 0.302879] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 20 [ 0.302887] schedtune: CPU[4] min_pwr: 8 max_pwr: 120 [ 0.302896] schedtune: CPU[5] min_pwr: 8 max_pwr: 120 [ 0.302904] schedtune: CPU[6] min_pwr: 8 max_pwr: 120 [ 0.302911] schedtune: CPU[7] min_pwr: 8 max_pwr: 120 [ 0.302918] schedtune: SYSTEM min_pwr: 194 max_pwr: 2500 [ 0.302928] schedtune: using normalization constants mul: 3333907832 sh1: 1 sh2: 11 [ 0.302933] schedtune: verify normalization constants... [ 0.302940] schedtune: max_pwr/2^0: 2306 => norm_pwr: 1024 [ 0.302947] schedtune: max_pwr/2^1: 1153 => norm_pwr: 512 [ 0.302954] schedtune: max_pwr/2^2: 576 => norm_pwr: 255 [ 0.302960] schedtune: max_pwr/2^3: 288 => norm_pwr: 127 [ 0.302967] schedtune: max_pwr/2^4: 144 => norm_pwr: 63 [ 0.302974] schedtune: max_pwr/2^5: 72 => norm_pwr: 31 [ 0.302981] schedtune: configured to support 5 boost groups [ 0.303763] ramoops: using module parameters [ 0.305430] pstore: using zlib compression [ 0.306062] console [pstore-1] enabled [ 0.306208] pstore: Registered ramoops as persistent store backend [ 0.306219] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0 [ 0.308090] cpuidle: using governor menu [ 0.309337] cpuidle: using governor qcom [ 0.324775] unable to find DT imem DLOAD mode node [ 0.325504] unable to find DT imem EDLOAD mode node [ 0.331882] msm_watchdog b017000.qcom,wdt: wdog absent resource not present [ 0.333540] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized [ 0.335964] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0 [ 0.337755] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 [ 0.337971] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 [ 0.338188] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 [ 0.338328] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 [ 0.350584] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0 [ 0.350835] irq: no irq domain found for /soc/pinctrl@1000000 ! [ 0.350978] irq: no irq domain found for /soc/pinctrl@1000000 ! [ 0.352118] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.352128] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.352225] msm8937-pinctrl 1000000.pinctrl: invalid resource [ 0.355130] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0! [ 0.355143] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 4 PVS Version: 0 [ 0.359705] smd_channel_probe_now: allocation table not initialized [ 0.359790] smd_channel_probe_now: allocation table not initialized [ 0.359869] smd_channel_probe_now: allocation table not initialized [ 0.361167] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches [ 0.365535] msm-sn-fuse a4128.snfuse: SN interface initialized [ 0.365551] msm-sn-fuse a4128.snfuse: CFI interface initialized [ 0.366455] pm8953_s1: Bringing 1uV into 16-16uV [ 0.366973] pm8953_s2_level: Bringing 1uV into 16-16uV [ 0.367448] pm8953_s2_floor_level: Bringing 1uV into 16-16uV [ 0.368170] pm8953_s2_level_ao: Bringing 1uV into 16-16uV [ 0.377689] pm8953_l19: Bringing 1224000uV into 1350000-1350000uV [ 0.379705] pm8953_s7_level_ao: Bringing 1uV into 16-16uV [ 0.382657] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000) [ 0.382695] cpr_read_fuse_revision: apc_corner: fuse revision = 1 [ 0.382710] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0xa0d0d07129a47ab2, speed_bits = 4 [ 0.382788] cpr_pvs_init: apc_corner: pvs voltage: [760000 785000 900000] uV [ 0.382800] cpr_pvs_init: apc_corner: ceiling voltage: [810000 845000 980000] uV [ 0.382811] cpr_pvs_init: apc_corner: floor voltage: [700000 700000 790000] uV [ 0.384757] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.389131] pm8953_s5_avs_limit: Bringing 0uV into 490000-490000uV [ 0.389403] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=735000 uV, mode=AUTO, step rate=2400 uV/us [ 0.394537] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517 [ 0.395099] sps:sps is ready. [ 0.396380] gfx3d_clk_src: set OPP pair(19200000 Hz: 128 uV) on 1c00000.qcom,kgsl-3d0 [ 0.396711] gfx3d_clk_src: set OPP pair(200000000 Hz: 128 uV) on 1c00000.qcom,kgsl-3d0 [ 0.397556] gfx3d_clk_src: set OPP pair(650000000 Hz: 384 uV) on 1c00000.qcom,kgsl-3d0 [ 0.411553] qcom,gcc-spm-8952 b111200.qcom,spm: Registered GCC SPM clocks [ 0.411586] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks [ 0.411663] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0! [ 0.411675] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 4 PVS Version: 0 [ 0.411928] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000) [ 0.411960] cpr_read_fuse_revision: apc_corner: fuse revision = 1 [ 0.411975] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0xa0d0d07129a47ab2, speed_bits = 4 [ 0.412053] cpr_pvs_init: apc_corner: pvs voltage: [760000 785000 900000] uV [ 0.412064] cpr_pvs_init: apc_corner: ceiling voltage: [810000 845000 980000] uV [ 0.412075] cpr_pvs_init: apc_corner: floor voltage: [700000 700000 790000] uV [ 0.412211] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4 [ 0.412236] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default. [ 0.412264] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x5b4b1202f884f521 [ 0.412286] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 5, target quot = 708 [ 0.412297] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 5, target quot = 760 [ 0.412307] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 5, target quot = 980 [ 0.412334] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 634 [ 0.412351] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 950 [ 0.412423] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.656 [ 0.412434] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.366 [ 0.412461] cpr_virtual_corner_quot_adjust: apc_corner: corner=3 adjusted quotient=816 [ 0.412484] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 634 [ 0.412493] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 760 [ 0.412502] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 816 [ 0.412510] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 873 [ 0.412519] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 929 [ 0.412527] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 950 [ 0.412575] cpr_fill_override_voltage: apc_corner: ceiling override voltage: [810000 845000 885000 980000 980000 980000] uV [ 0.413062] cpr_init_floor_to_ceiling_range: apc_corner: Final floor override voltages: [710000 735000 790000 790000 825000 835000] uV [ 0.413106] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us) [ 0.413433] apc_corner: Bringing 0uV into 1-1uV [ 0.413857] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517 [ 0.413938] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0! [ 0.413950] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 4 PVS Version: 0 [ 0.418090] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 7 and 3) [ 0.418102] print_opp_table: clock_cpu: a53_c0: OPP voltage for 768000000: 760000 [ 0.418112] print_opp_table: clock_cpu: a53_c0: OPP voltage for 1459200000: 890000 [ 0.418122] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 760000 [ 0.418131] print_opp_table: clock_cpu: a53_c1: OPP voltage for 2016000000: 900000 [ 0.418207] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517 [ 0.437694] sched-energy energy-costs: cpu=0 eff=1126 [freq=800000 cap=407 power_d0=137] -> [freq=2016000 cap=1024 power_d0=470] [ 0.437705] CPU0: update cpu_capacity 1024 [ 0.437720] sched-energy energy-costs: cpu=1 eff=1126 [freq=800000 cap=407 power_d0=137] -> [freq=2016000 cap=1024 power_d0=470] [ 0.437729] CPU1: update cpu_capacity 1024 [ 0.437744] sched-energy energy-costs: cpu=2 eff=1126 [freq=800000 cap=407 power_d0=137] -> [freq=2016000 cap=1024 power_d0=470] [ 0.437752] CPU2: update cpu_capacity 1024 [ 0.437767] sched-energy energy-costs: cpu=3 eff=1126 [freq=800000 cap=407 power_d0=137] -> [freq=2016000 cap=1024 power_d0=470] [ 0.437775] CPU3: update cpu_capacity 1024 [ 0.437790] sched-energy energy-costs: cpu=4 eff=1024 [freq=768000 cap=356 power_d0=43] -> [freq=1459200 cap=675 power_d0=120] [ 0.437798] CPU4: update cpu_capacity 675 [ 0.437812] sched-energy energy-costs: cpu=5 eff=1024 [freq=768000 cap=356 power_d0=43] -> [freq=1459200 cap=675 power_d0=120] [ 0.437821] CPU5: update cpu_capacity 675 [ 0.437835] sched-energy energy-costs: cpu=6 eff=1024 [freq=768000 cap=356 power_d0=43] -> [freq=1459200 cap=675 power_d0=120] [ 0.437843] CPU6: update cpu_capacity 675 [ 0.437858] sched-energy energy-costs: cpu=7 eff=1024 [freq=768000 cap=356 power_d0=43] -> [freq=1459200 cap=675 power_d0=120] [ 0.437866] CPU7: update cpu_capacity 675 [ 0.438383] CPU7: update max cpu_capacity 675 [ 0.438396] CPU3: update max cpu_capacity 1024 [ 0.439453] sched-energy energy-costs: Sched-energy-costs capacity updated [ 0.440179] CPU0: update max cpu_capacity 1024 [ 0.447255] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.447270] mdss_pll_probe: mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi rootwait ro init=/init androidboot.dtbo_idx=6 res=1 [ 0.447280] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.447306] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.447324] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.448009] dsi_pll_clock_register_12nm: Registered DSI PLL ndx=0 clocks successfully [ 0.448065] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL [ 0.448078] mdss_pll_probe: mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi rootwait ro init=/init androidboot.dtbo_idx=6 res=1 [ 0.448087] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled [ 0.448111] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.448129] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.449591] dsi_pll_clock_register_12nm: Registered DSI PLL ndx=1 clocks successfully [ 0.451937] KPI: Bootloader start count = 38266 [ 0.451947] KPI: Bootloader end count = 120291 [ 0.451955] KPI: Bootloader display count = 54742 [ 0.451962] KPI: Bootloader load kernel count = 3199 [ 0.451970] KPI: Kernel MPM timestamp = 176394 [ 0.451978] KPI: Kernel MPM Clock frequency = 32768 [ 0.452002] socinfo_print: v0.10, id=353, ver=1.0, raw_id=191, raw_ver=0, hw_plat=11, hw_plat_ver=65536 [ 0.452002] accessory_chip=0, hw_plat_subtype=2, pmic_model=65558, pmic_die_revision=65536 foundry_id=1 serial_number=698645170 [ 0.453794] arm-smmu 1c40000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property) [ 0.453810] arm-smmu 1c40000.arm,smmu-kgsl: stream matching with 4 register groups, mask 0x7fff [ 0.454816] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property) [ 0.454831] arm-smmu 1e00000.qcom,iommu: stream matching with 123 register groups, mask 0x7fff [ 0.454938] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts. [ 0.455417] iommu: Adding device soc:qcom,msm-audio-ion to group 0 [ 0.458094] pcba config =113. [ 0.458387] SCSI subsystem initialized [ 0.458650] usbcore: registered new interface driver usbfs [ 0.458720] usbcore: registered new interface driver hub [ 0.459082] usbcore: registered new device driver usb [ 0.460014] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot [ 0.460122] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) [ 0.460456] input: qpnp_pon as /devices/virtual/input/input0 [ 0.461392] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: No PON config. specified [ 0.461444] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot [ 0.461474] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi632@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP2 (Keypad_Reset2) [ 0.461839] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.461896] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.461909] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.462164] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.462759] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 [ 0.462801] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.462812] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) [ 0.463063] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.463919] media: Linux media interface: v0.10 [ 0.463967] Linux video capture interface: v2.00 [ 0.464468] BATTERY: batterydata_init: Battery-data device created! [ 0.477212] EDAC MC: Ver: 3.0.0 [ 0.480089] cpufreq: driver msm up and running [ 0.481020] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0 [ 0.481098] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 [ 0.481171] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region [ 0.481309] ION heap system created [ 0.481465] ION heap mm created at 0xf8800000 with size 7000000 [ 0.481473] ION heap qsecom created at 0xf7800000 with size 1000000 [ 0.481480] ION heap qsecom_ta created at 0xf6800000 with size 1000000 [ 0.482268] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0 [ 0.482345] PMIC@SID2: PMI632 v2.0 options: 0, 0, 0, 0 [ 0.482814] Advanced Linux Sound Architecture Driver Initialized. [ 0.483114] Bluetooth: Core ver 2.22 [ 0.483128] NET: Registered protocol family 31 [ 0.483132] Bluetooth: HCI device and connection manager initialized [ 0.483139] Bluetooth: HCI socket layer initialized [ 0.483145] Bluetooth: L2CAP socket layer initialized [ 0.483407] NetLabel: Initializing [ 0.483411] NetLabel: domain hash size = 128 [ 0.483414] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.483443] NetLabel: unlabeled traffic allowed by default [ 0.483648] lcdb_ldo: Bringing 5500000uV into 6000000-6000000uV [ 0.483913] lcdb_ncp: Bringing 5500000uV into 6000000-6000000uV [ 0.484236] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=6000mV ncp_voltage=6000mV bst_voltage=6150mV [ 0.484996] clocksource: Switched to clocksource arch_sys_counter [ 0.513387] VFS: Disk quotas dquot_6.6.0 [ 0.513435] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.513489] msm_bus_fabric_init_driver [ 0.518029] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful [ 0.519032] ktrace : register ktrace events mm [ 0.519052] ktrace : register ktrace events sched [ 0.519081] ktrace : register ktrace events binder [ 0.519097] ktrace : register ktrace events misc [ 0.519123] ktrace : register ktrace events cpufreq [ 0.519157] ktrace : ktrace events init OK [ 0.519172] ktrace : sched ktrace init OK [ 0.519175] ktrace : ktrace init OK [ 0.519221] NET: Registered protocol family 2 [ 0.519618] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.519654] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.519712] TCP: Hash tables configured (established 8192 bind 8192) [ 0.519742] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.519758] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.519849] NET: Registered protocol family 1 [ 0.520433] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks. [ 0.521046] Trying to unpack rootfs image as initramfs... [ 0.882624] Freeing initrd memory: 15640K [ 0.883650] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available [ 0.887566] audit: initializing netlink subsys (disabled) [ 0.887607] audit: type=2000 audit(0.879:1): initialized [ 0.887770] Initialise system trusted keyrings [ 0.888138] workingset: timestamp_bits=13 max_order=20 bucket_order=7 [ 0.891416] Registering sdcardfs 0.1 [ 0.891514] fuse init (API version 7.26) [ 0.891896] SELinux: Registering netfilter hooks [ 0.892041] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully [ 0.892045] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully [ 0.892051] pfk [pfk_init]: Driver initialized successfully [ 0.896436] Key type asymmetric registered [ 0.896441] Asymmetric key parser 'x509' registered [ 0.896473] bounce: pool size: 64 pages [ 0.896535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.896541] io scheduler noop registered [ 0.896595] io scheduler cfq registered (default) [ 0.904420] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1 (ok) [ 0.904491] [ktd]probe start! [ 0.904491] [ 0.904497] [ktd]hwen --<-2> [ 0.904497] [ 0.904501] [ktd]pwmmode --<0> [ 0.904501] [ 0.904506] [ktd]using_lsb --<1> [ 0.904506] [ 0.904510] [ktd]pwm-frequency --<100> [ 0.904510] [ 0.904515] [ktd]full-scale led current --<152 mA> [ 0.904515] [ 0.904519] [ktd]ramp on time --<0 ms> [ 0.904519] [ 0.904524] [ktd]ramp off time --<0 ms> [ 0.904524] [ 0.904529] [ktd]pwm trnasition dimming --<0 ms> [ 0.904529] [ 0.904533] [ktd]i2c transition dimming --<0 ms> [ 0.904533] [ 0.904538] [ktd]bl-channel --<2> [ 0.904538] [ 0.904543] [ktd]ovp-level --<32> --temp <32> [ 0.904543] [ 0.904548] [ktd]switching frequency --<1000> [ 0.904548] [ 0.904552] [ktd]inductor current limit --<2600> [ 0.904552] [ 0.904557] invalid flash-time value! [ 0.904560] [ktd]linear_ramp --<1> [ 0.904560] [ 0.904565] [ktd]linear_backlight --<1> [ 0.904565] [ 0.904569] invalid flash current value! [ 0.904787] [ktd]Device ID is --<0x03> [ 0.904787] [ 0.905759] [ktd]register pwm<0x06> current value is --<1b> [ 0.905759] [ 0.906130] [ktd]rampon time is 0 [ 0.906130] [ 0.906503] [ktd]rampoff time is 0 [ 0.906503] [ 0.907744] [ktd]read control register -before--<0x6e> -after--<0x6e> [ 0.907744] [ 0.908775] [ktd]Successfully added driver ktd,ktd3137 [ 0.908775] [ 0.908853] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found [ 0.908865] mdss_mdp_probe+0x1b4/0x1338->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed [ 0.909009] mdss_mdp_irq_clk_register: unable to get clk: lut_clk [ 0.909019] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk [ 0.909281] No change in context(0==0), skip [ 0.909700] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 [ 0.909716] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1 [ 0.909722] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2 [ 0.909734] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3 [ 0.909748] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 [ 0.909757] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read [ 0.909830] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read [ 0.909837] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read [ 0.910052] xlog_status: enable:0, panic:1, dump:2 [ 0.910267] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1 [ 0.910435] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2 [ 0.910591] mdss_mdp_probe: mdss version = 0x100e0000, bootloader display is on, num 1, intf_sel=0x00000100 [ 0.911743] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.911751] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! [ 0.911766] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.911772] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! [ 0.912009] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.912019] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.912029] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.912457] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 [ 0.912609] [white point calibration] white_point_num_x = 291,white_point_num_y = 311 [ 0.912614] mdss_dsi_find_panel_of_node:[tp lockdown info] tp lockdown info is not present in 0:qcom,mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi [ 0.912620] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ili9881h_hdplus_video_c3i [ 0.912637] mdss_dsi_panel_init: Panel Name = ili9881h hdplus c3i video mode dsi panel [ 0.912763] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ili9881h_hdplus_video_c3i" (eaa0b5e0) [ 0.912783] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command [ 0.912790] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command [ 0.912795] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: [ 0.912876] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command [ 0.912883] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command [ 0.912926] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cold_gamma-command [ 0.912932] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-warm_gamma-command [ 0.912940] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-default_gamma-command [ 0.912946] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM1-command [ 0.912953] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM2-command [ 0.912960] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM3-command [ 0.912967] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM4-command [ 0.912974] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM5-command [ 0.912981] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM6-command [ 0.912987] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM7-command [ 0.912994] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM8-command [ 0.913012] mdss_dsi_parse_panel_features: ulps feature disabled [ 0.913018] mdss_dsi_parse_panel_features: ulps during suspend feature disabled [ 0.913025] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 [ 0.913060] mdss_dsi_parse_esd_status_len: request property number(1) not match command count(2) [ 0.913076] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on [ 0.913083] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off [ 0.913114] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.913122] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.913130] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.913139] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.913257] mdss_dsi_parse_ctrl_params:4198, Unable to read Phy Strength ctrl settings [ 0.913263] mdss_dsi_parse_ctrl_params:4212, Unable to read Phy regulator settings [ 0.913268] mdss_dsi_parse_ctrl_params:4232, Unable to read Phy lane configure settings [ 0.913277] mdss_dsi_parse_ctrl_params:4264 Unable to read qcom,display-id, data=00000000,len=-1006113920 [ 0.913286] mdss_dsi_parse_gpio_params: bklt_en gpio not specified [ 0.913291] mdss_dsi_parse_gpio_params: ext vdd gpio not specified [ 0.913322] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found [ 0.913334] mdss_dsi_retrieve_ctrl_resources+0xe0/0x21c->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed [ 0.913339] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ed259000 ctrl_size=300 phy_base=ed25b400 phy_size=400 [ 0.913456] dsi_panel_device_register: Continuous splash enabled [ 0.913515] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0 [ 0.934305] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x3 [ 0.934478] mdss_dsi_status_init: DSI status check interval:5000 [ 0.934634] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel [ 0.935032] mdss_fb_probe: fb0: split_mode:0 left:0 right:0 [ 0.935362] mdss_fb_register: FrameBuffer[0] 720x1520 registered successfully! [ 0.935582] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 [ 0.935652] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully! [ 0.935732] mdss_mdp_splash_parse_dt: splash mem child node is not present [ 0.935811] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels! [ 0.935858] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels! [ 0.936738] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 0.936755] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 0.938585] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.938591] batched_hyp_assign: Failed to assign memory protection, ret = -5 [ 0.938596] memshare: hyp_assign_phys failed size=2097152 err=-5 [ 0.938618] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped. [ 0.938780] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped. [ 0.941597] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.941602] batched_hyp_assign: Failed to assign memory protection, ret = -5 [ 0.941606] memshare: hyp_assign_phys failed size=5242880 err=-5 [ 0.941613] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped. [ 0.942586] minidump-id not found for adsp [ 0.942680] minidump-id not found for wcnss [ 0.942848] minidump-id not found for venus [ 0.942859] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. [ 0.943088] minidump-id not found for a506_zap [ 0.943096] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped. [ 0.943719] minidump-id not found for modem [ 0.944047] msm-dcc b3000.dcc: DCC XPU is not specified [ 0.945053] wcnss: wcnss_wlan probed in built-in mode [ 0.945703] msm_serial_hs module loaded [ 0.947162] random: fast init done [ 0.947244] random: crng init done [ 0.948135] diag: MUX: unable to register pcie operations for proc: 0, err: -22 [ 0.948141] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22 [ 0.954570] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL [ 0.954718] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA [ 0.954853] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD [ 0.954981] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA [ 0.955115] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD [ 0.957835] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3 [ 0.958038] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0 [ 0.958253] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4 [ 0.966955] brd: module loaded [ 0.970683] loop: module loaded [ 0.971063] zram: Added device: zram0 [ 0.971757] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000 [ 0.971779] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE [ 0.971787] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem [ 0.971792] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 [ 0.971971] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 [ 0.972529] msm8937-pinctrl 1000000.pinctrl: function 'fpc_reset_gpio_low' not supported [ 0.972534] msm8937-pinctrl 1000000.pinctrl: invalid function fpc_reset_gpio_low in map table [ 0.972553] msm8937-pinctrl 1000000.pinctrl: function 'fpc_reset_gpio_high' not supported [ 0.972557] msm8937-pinctrl 1000000.pinctrl: invalid function fpc_reset_gpio_high in map table [ 0.972603] fpc1020 soc:fpc1020: fpc1020_probe: ok [ 0.972668] fpc1020_init OK [ 0.972773] enter lan_enable_probe [ 0.972824] enter lan_enable_probe, ok [ 0.972934] simtray_probe enter [ 0.973245] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok) [ 0.973732] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0x8 MSTR_STS:0x0d1300c8 OPER:0x00000010 [ 0.973811] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0x8 MSTR_STS:0x0113e3c8 OPER:0x00000010 [ 0.973885] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0x8 MSTR_STS:0x011363c8 OPER:0x00000010 [ 0.973958] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0x8 MSTR_STS:0x011363c8 OPER:0x00000010 [ 0.973972] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107 [ 0.973977] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107 [ 0.973980] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107 [ 0.974031] i2c_pmic: probe of 2-0008 failed with error -107 [ 0.974395] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x0113e3c8 OPER:0x00000010 [ 0.974470] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010 [ 0.974543] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010 [ 0.974617] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010 [ 0.974631] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107 [ 0.974635] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107 [ 0.974638] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107 [ 0.974670] i2c_pmic: probe of 2-000c failed with error -107 [ 0.975850] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 0.976169] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000 [ 0.976177] qce 720000.qcedev: CE device = 0x0 IO base, CE = ee720000 Consumer (IN) PIPE 2, [ 0.976177] Producer (OUT) PIPE 3 IO base BAM = 00000000 [ 0.976177] BAM IRQ 86 Engines Availability = 0x2010853 [ 0.976324] sps:BAM 0x00704000 is registered. [ 0.976466] sps:BAM 0x00704000 (va:0xee9a0000) enabled: ver:0x27, number of pipes:8 [ 0.976629] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 86 [ 0.980426] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 0.980779] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000 [ 0.980786] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = eeba0000 Consumer (IN) PIPE 4, [ 0.980786] Producer (OUT) PIPE 5 IO base BAM = 00000000 [ 0.980786] BAM IRQ 86 Engines Availability = 0x2010853 [ 0.981000] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 86 [ 0.983164] qcrypto 720000.qcrypto: qcrypto-ecb-aes [ 0.983296] qcrypto 720000.qcrypto: qcrypto-cbc-aes [ 0.983410] qcrypto 720000.qcrypto: qcrypto-ctr-aes [ 0.983525] qcrypto 720000.qcrypto: qcrypto-ecb-des [ 0.983638] qcrypto 720000.qcrypto: qcrypto-cbc-des [ 0.983750] qcrypto 720000.qcrypto: qcrypto-ecb-3des [ 0.983862] qcrypto 720000.qcrypto: qcrypto-cbc-3des [ 0.983974] qcrypto 720000.qcrypto: qcrypto-xts-aes [ 0.984088] qcrypto 720000.qcrypto: qcrypto-sha1 [ 0.984200] qcrypto 720000.qcrypto: qcrypto-sha256 [ 0.984320] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 0.984434] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 0.984549] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 0.984663] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 0.984774] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 0.984886] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 0.984999] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 [ 0.985110] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 [ 0.985252] qcrypto 720000.qcrypto: qcrypto-aes-ccm [ 0.985380] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm [ 0.985956] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 0.986000] ICE IRQ = 80 [ 0.986389] SCSI Media Changer driver v0.25 [ 0.987155] sps: BAM device 0x07884000 is not registered yet. [ 0.987297] sps:BAM 0x07884000 is registered. [ 0.987622] sps:BAM 0x07884000 (va:0xee920000) enabled: ver:0x19, number of pipes:12 [ 0.988536] sps: BAM device 0x07ac4000 is not registered yet. [ 0.988663] sps:BAM 0x07ac4000 is registered. [ 0.988923] sps:BAM 0x07ac4000 (va:0xee9e0000) enabled: ver:0x19, number of pipes:12 [ 0.989933] libphy: Fixed MDIO Bus: probed [ 0.989938] tun: Universal TUN/TAP device driver, 1.6 [ 0.989941] tun: (C) 1999-2004 Max Krasnyansky [ 0.989986] PPP generic driver version 2.4.2 [ 0.990090] PPP BSD Compression module registered [ 0.990095] PPP Deflate Compression module registered [ 0.990110] PPP MPPE Compression module registered [ 0.990115] NET: Registered protocol family 24 [ 0.990213] usbcore: registered new interface driver asix [ 0.990258] usbcore: registered new interface driver ax88179_178a [ 0.990280] usbcore: registered new interface driver cdc_ether [ 0.990301] usbcore: registered new interface driver net1080 [ 0.990323] usbcore: registered new interface driver cdc_subset [ 0.990344] usbcore: registered new interface driver zaurus [ 0.990374] usbcore: registered new interface driver cdc_ncm [ 0.990379] CHRDEV "uio" major number 233 goes below the dynamic allocation range [ 0.990784] msm_sharedmem: sharedmem_register_qmi: qmi init successful [ 0.991942] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.991947] batched_hyp_assign: Failed to assign memory protection, ret = -5 [ 0.991953] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160xf6300000 size=1572864 err=-5 [ 0.992019] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 0.992439] msm_otg 78db000.usb: msm_otg probe [ 0.993541] msm_otg 78db000.usb: OTG regs = edc23000 [ 0.994597] ------------[ cut here ]------------ [ 0.994612] WARNING: CPU: 0 PID: 1 at /home/work/olivelite-q-stable-build/kernel/msm-4.9/drivers/base/core.c:600 device_create_file+0x7c/0xac [ 0.994616] Attribute otg_status: write permission without 'store' [ 0.994619] Modules linked in: [ 0.994628] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.193-perf-g1011f5b #1 [ 0.994631] Hardware name: Qualcomm Technologies, Inc. SDM439 (Flattened Device Tree) [ 0.994649] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 0.994657] [] (show_stack) from [] (dump_stack+0x94/0xa8) [ 0.994666] [] (dump_stack) from [] (__warn+0xf8/0x110) [ 0.994674] [] (__warn) from [] (warn_slowpath_fmt+0x58/0x74) [ 0.994681] [] (warn_slowpath_fmt) from [] (device_create_file+0x7c/0xac) [ 0.994691] [] (device_create_file) from [] (msm_otg_probe+0x1674/0x1c34) [ 0.994700] [] (msm_otg_probe) from [] (platform_drv_probe+0x48/0xac) [ 0.994708] [] (platform_drv_probe) from [] (driver_probe_device+0x23c/0x2e8) [ 0.994715] [] (driver_probe_device) from [] (__driver_attach+0xc8/0xcc) [ 0.994721] [] (__driver_attach) from [] (bus_for_each_dev+0x8c/0xd0) [ 0.994728] [] (bus_for_each_dev) from [] (driver_attach+0x2c/0x30) [ 0.994734] [] (driver_attach) from [] (bus_add_driver+0x1ac/0x224) [ 0.994740] [] (bus_add_driver) from [] (driver_register+0x9c/0x120) [ 0.994747] [] (driver_register) from [] (__platform_driver_register+0x50/0x58) [ 0.994757] [] (__platform_driver_register) from [] (msm_otg_driver_init+0x1c/0x20) [ 0.994766] [] (msm_otg_driver_init) from [] (do_one_initcall+0x60/0x1a4) [ 0.994775] [] (do_one_initcall) from [] (kernel_init_freeable+0x200/0x2bc) [ 0.994785] [] (kernel_init_freeable) from [] (kernel_init+0x18/0x158) [ 0.994794] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.994801] ---[ end trace 896f8dfe13aa5293 ]--- [ 0.995254] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range [ 0.995306] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.995310] ehci-platform: EHCI generic platform driver [ 0.995640] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 0.995687] i2c-msm-v2 7af5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1343c8 OPER:0x00000090 [ 0.995715] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send core reset Error [ 0.995851] Unable to get vbus_otg [ 0.995857] msm_hsusb_host msm_hsusb_host: unable to register with transceiver [ 0.995937] usbcore: registered new interface driver cdc_acm [ 0.995941] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.995972] usbcore: registered new interface driver usb-storage [ 0.995992] usbcore: registered new interface driver ums-alauda [ 0.996011] usbcore: registered new interface driver ums-cypress [ 0.996031] usbcore: registered new interface driver ums-datafab [ 0.996053] usbcore: registered new interface driver ums-freecom [ 0.996072] usbcore: registered new interface driver ums-isd200 [ 0.996091] usbcore: registered new interface driver ums-jumpshot [ 0.996110] usbcore: registered new interface driver ums-karma [ 0.996129] usbcore: registered new interface driver ums-onetouch [ 0.996148] usbcore: registered new interface driver ums-sddr09 [ 0.996168] usbcore: registered new interface driver ums-sddr55 [ 0.996187] usbcore: registered new interface driver ums-usbat [ 0.996233] usbcore: registered new interface driver usbserial [ 0.996257] usbcore: registered new interface driver usb_ehset_test [ 0.996281] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range [ 0.996817] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range [ 0.997396] mousedev: PS/2 mouse device common for all mice [ 0.997801] ILITEK:INFO (ilitek_plat_dev_init, 469): ILITEK TP driver init for QCOM [ 0.997806] ILITEK:INFO (ilitek_tddi_dev_init, 809): TP Interface: SPI [ 0.997811] ILITEK:INFO (ilitek_tddi_interface_dev_init, 676): ilitek start [ 0.997816] ILITEK:INFO (ilitek_tddi_interface_dev_init, 701): ilitek_tddi_interface_dev_init [ 0.997985] ILITEK:INFO (ilitek_spi_probe, 578): ilitek spi probe [ 0.998040] ILITEK:INFO (core_spi_setup, 552): spi clock = 10485760 [ 0.998094] ILITEK:INFO (core_spi_setup, 568): name = ilitek, bus_num = 3,cs = 0, mode = 0, speed = 10485760 [ 0.998099] ILITEK:INFO (ilitek_plat_probe, 422): platform probe [ 0.998107] ILITEK:INFO (ilitek_plat_gpio_register, 182): TP INT: 65 [ 0.998110] ILITEK:INFO (ilitek_plat_gpio_register, 183): TP RESET: 64 [ 0.998123] ILITEK:INFO (ilitek_tddi_init, 697): ilitek tddi main init [ 0.998468] ILITEK:INFO (ilitek_tddi_reset_ctrl, 672): TP HW RST [ 1.009481] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [ 1.009949] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [ 1.010719] ILITEK:INFO (ilitek_tddi_ic_get_info, 1114): CHIP INFO: PID = 98811105, ID = 9881, TYPE = 110005, OTP = 11, ANA = 11 [ 1.010724] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [ 1.011650] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.011848] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.012046] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.012305] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.012503] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x3 retry = 99 [ 1.012823] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.013020] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.014236] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.014434] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.014631] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.014891] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.015088] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.015406] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.015603] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.016831] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.017028] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.017227] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.017487] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.017684] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.018017] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.018215] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.019424] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.019622] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.019820] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.020112] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.020313] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.020632] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.020830] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.022042] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.022239] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.022436] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.022696] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.022894] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.023213] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.023410] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.024622] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.024820] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.025017] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.025277] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.025474] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.025793] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.025990] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.026175] i2c-msm-v2 7af5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:8) mode:FIFO slv_addr:0x28 MSTR_STS:0x0113e3c8 OPER:0x00000090 [ 1.026196] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send get version cmd Error [ 1.026202] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available [ 1.026311] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware [ 1.027228] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.027426] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.027624] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.027884] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.028082] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.028405] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.028602] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.029811] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.030009] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.030235] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.030498] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x1 retry = 99 [ 1.030696] ILITEK:INFO (ilitek_tddi_ic_rd_pack, 464): check ok 0x4800A read 0x7 retry = 99 [ 1.031015] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.031213] ILITEK:INFO (ilitek_tddi_ic_wr_pack, 439): check ok 0x73010 read 0x5 retry = 99 [ 1.031519] ILITEK:INFO (ilitek_tddi_node_lock_down_info, 1926): Sucess to creat ilitek_tp_lockdown_info /proc [ 1.031527] ILITEK:INFO (ilitek_mp_test, 1938): Succeed to create ilitek_mptest success /proc [ 1.031533] ILITEK:INFO (ilitek_tp_selftest, 1948): Succeed to create ilitek_mptest success /proc [ 1.031541] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create ioctl under /proc [ 1.031546] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create fw_process under /proc [ 1.031552] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create fw_upgrade under /proc [ 1.031557] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create debug_level under /proc [ 1.031563] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create mp_lcm_on_test under /proc [ 1.031568] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create mp_lcm_off_test under /proc [ 1.031573] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create debug_message under /proc [ 1.031579] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create debug_message_switch under /proc [ 1.031584] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create fw_pc_counter under /proc [ 1.031589] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create show_delta_data under /proc [ 1.031595] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create show_raw_data under /proc [ 1.031600] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create get_debug_mode_data under /proc [ 1.031605] ILITEK:INFO (ilitek_tddi_node_init, 1971): Succeed to create rw_tp_reg under /proc [ 1.031625] ILITEK:INFO (netlink_init, 1910): Initialise Netlink and create its socket [ 1.031629] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Disable ICE mode, mcu on = 0 [ 1.031802] ILITEK:INFO (ilitek_plat_irq_register, 316): idev->irq_num = 293 [ 1.031818] ILITEK:INFO (ilitek_tddi_fw_upgrade_handler, 459): get touch lock [ 1.031882] ILITEK:INFO (ilitek_tddi_fw_upgrade, 1430): Convert FW file from HEX_FILE [ 1.031888] ILITEK:INFO (ilitek_tdd_fw_hex_open, 1313): Open file method = FILP_OPEN, path = /vendor/firmware/ILITEK_FW [ 1.032015] ILITEK:ERR (ilitek_tdd_fw_hex_open, 1344): Failed to open the file at -2. [ 1.032022] ILITEK:ERR (ilitek_tddi_fw_upgrade, 1434): Open hex file fail, try upgrade from ILI file [ 1.032028] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1146): Start to parse ILI file, type = 159, block_count = 5 [ 1.032035] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[1]: start_addr = 0, end = ffff [ 1.032040] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[2]: start_addr = 10000, end = 11fff [ 1.032046] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[3]: start_addr = 12000, end = 121ff [ 1.032051] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[4]: start_addr = 1d000, end = 1efff [ 1.032057] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[5]: start_addr = 13000, end = 1cfff [ 1.032063] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1193): Tag 0xB0: change Block[2] to addr = 0x20870 [ 1.032069] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1193): Tag 0xB0: change Block[3] to addr = 0x20670 [ 1.032110] ILITEK:INFO (ilitek_plat_sleep_init, 402): Init notifier_fb struct [ 1.032140] [NVT-ts] nvt_driver_init 2356: start [ 1.032162] ILITEK:INFO (ilitek_tddi_fw_update_block_info, 1136): New FW ver = 0x4011600 [ 1.032164] [NVT-ts] nvt_ts_probe 1573: start [ 1.032175] ILITEK:INFO (ilitek_tddi_fw_update_block_info, 1137): star_addr = 0x000000, end_addr = 0x01F000, Block Num = 5 [ 1.032182] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [ 1.032220] [NVT-ts] nvt_ts_probe 1622: mode=0, max_speed_hz=9600000 [ 1.032228] [NVT-ts] nvt_parse_dt 1086: novatek,irq-gpio=65 [ 1.032232] [NVT-ts] nvt_parse_dt 1093: SWRST_N8_ADDR=0x03F0FE [ 1.032237] [NVT-ts] nvt_parse_dt 1102: SPI_RD_FAST_ADDR=0x03F310 [ 1.032241] [NVT-ts] nvt_gpio_config 1144: Failed to request NVT-int GPIO [ 1.032245] [NVT-ts] nvt_ts_probe 1634: gpio config error! [ 1.032252] NVT-ts: probe of spi3.1 failed with error -16 [ 1.032267] [NVT-ts] nvt_driver_init 2365: finished [ 1.032271] [FTS_TS]fts_ts_init: Enter [ 1.032457] [FTS_TS/I]fts_ts_probe:Touch Screen(SPI BUS) driver prboe... [ 1.032583] [FTS_TS]fts_ts_probe_entry: Enter [ 1.032587] [FTS_TS/I]fts_ts_probe_entry:Focaltech V3.1 20190807 [ 1.032591] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [ 1.032596] [FTS_TS]fts_parse_dt: Enter [ 1.032601] [FTS_TS/I]fts_get_dt_coords:display x(0 720) y(0 1520) [ 1.032609] [FTS_TS/I]fts_parse_dt:max touch number:10, irq gpio:65, reset gpio:64 [ 1.032612] [FTS_TS]fts_parse_dt: Exit(1277) [ 1.032781] [FTS_TS]fts_bus_init: Enter [ 1.032785] [FTS_TS]fts_bus_init: Exit(324) [ 1.032789] [FTS_TS]fts_input_init: Enter [ 1.032898] input: fts_ts as /devices/platform/soc/78b7000.spi/spi_master/spi3/spi3.2/input/input1 [ 1.032947] [FTS_TS]fts_input_init: Exit(818) [ 1.032951] [FTS_TS]fts_gpio_configure: Enter [ 1.032955] [FTS_TS/E]fts_gpio_configure:[GPIO]irq gpio request failed [ 1.032959] [FTS_TS]fts_gpio_configure: Exit(1154) [ 1.032962] [FTS_TS/E]fts_ts_probe_entry:configure the gpios fail [ 1.033361] [FTS_TS]fts_ts_probe_entry: Exit(1590) [ 1.033366] [FTS_TS/E]fts_ts_probe:Touch Screen(SPI BUS) driver probe fail [ 1.033373] fts_ts: probe of spi3.2 failed with error -16 [ 1.033388] [FTS_TS]fts_ts_init: Exit(1817) [ 1.033392] SAR virtualsar_init - Start driver initialization... [ 1.033451] virtualsar,sar 5-0033: virtualsar_probe [ 1.033455] SAR virtualsar_probe - Device tree matched! [ 1.033458] parse irq gpio correctly [ 1.033458] [ 1.033461] sar_parse_dt success [ 1.033551] input: vitural-sar as /devices/virtual/input/input2 [ 1.033640] after sar_irq_enable,probe end [ 1.033673] ret : 0 [ 1.034172] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0 [ 1.034288] i2c /dev entries driver [ 1.034436] CHRDEV "BaseRemoteCtl" major number 229 goes below the dynamic allocation range [ 1.034440] lirc_dev: IR Remote Control driver registered, major 229 [ 1.034445] IR NEC protocol handler initialized [ 1.034448] IR RC5(x/sz) protocol handler initialized [ 1.034452] IR RC6 protocol handler initialized [ 1.034455] IR JVC protocol handler initialized [ 1.034458] IR Sony protocol handler initialized [ 1.034462] IR SANYO protocol handler initialized [ 1.034465] IR Sharp protocol handler initialized [ 1.034469] IR MCE Keyboard/mouse protocol handler initialized [ 1.034472] IR LIRC bridge handler initialized [ 1.034476] IR XMP protocol handler initialized [ 1.034581] ir-spi spi6.0: lirc_dev: driver ir-spi registered at minor = 0 [ 1.035212] ILITEK:INFO (ilitek_tddi_reset_ctrl, 672): TP HW RST [ 1.036578] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5 [ 1.037019] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6 [ 1.037373] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7 [ 1.037679] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8 [ 1.041280] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9 [ 1.041370] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024 [ 1.041370] , [ 1.041376] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 9216 [ 1.041376] , [ 1.041560] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10 [ 1.041646] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168 [ 1.041646] , [ 1.041705] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11 [ 1.041802] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144 [ 1.041802] , [ 1.042791] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts [ 1.044726] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts [ 1.044859] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts [ 1.045147] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts [ 1.045278] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts [ 1.045402] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts [ 1.045742] msm_actuator_platform_probe:1994 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 1.046228] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [ 1.046541] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [ 1.047343] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download AP code from hex 0x0 to IRAM 0x0, len = 0x10000 [ 1.055556] msm_cci_init:1446: hw_version = 0x10020004 [ 1.055703] msm_cci_irq:1819 MASTER_0 error 0x10000000 [ 1.055731] msm_cci_i2c_read:966 read_words = 0, exp words = 4 [ 1.055736] msm_cci_i2c_read_bytes:1049 failed rc -22 [ 1.055752] read_eeprom_memory: read failed [ 1.055756] msm_eeprom_platform_probe read_eeprom_memory failed [ 1.063976] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@0 failed with error -22 [ 1.073654] msm_cci_init:1446: hw_version = 0x10020004 [ 1.073791] msm_cci_irq:1819 MASTER_0 error 0x10000000 [ 1.073818] msm_cci_i2c_read:966 read_words = 0, exp words = 4 [ 1.073823] msm_cci_i2c_read_bytes:1049 failed rc -22 [ 1.073839] read_eeprom_memory: read failed [ 1.073842] msm_eeprom_platform_probe read_eeprom_memory failed [ 1.082031] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@1 failed with error -22 [ 1.091689] msm_cci_init:1446: hw_version = 0x10020004 [ 1.125257] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): AP CRC is Correct ! (f56fa10e) : (f56fa10e) [ 1.125267] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download DATA code from hex 0x10000 to IRAM 0x20870, len = 0x2000 [ 1.137284] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): DATA CRC is Correct ! (18dcba9) : (18dcba9) [ 1.137292] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download TUNING code from hex 0x12000 to IRAM 0x20670, len = 0x200 [ 1.141099] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): TUNING CRC is Correct ! (17d552db) : (17d552db) [ 1.141106] ILITEK:INFO (ilitek_tddi_reset_ctrl, 660): TP IC Code RST [ 1.141183] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Disable ICE mode, mcu on = 0 [ 1.241288] ILITEK:INFO (ilitek_tddi_fw_check_update, 1389): FW upgrade PASS [ 1.241307] ILITEK:INFO (ilitek_tddi_fw_upgrade_handler, 475): Flash FW completed ... update TP/FW info [ 1.241313] ILITEK:INFO (ilitek_tddi_ic_check_protocol_ver, 1025): update protocol version = 50500 [ 1.241318] ILITEK:INFO (ilitek_tddi_ic_get_protocl_ver, 1081): Protocol version = 5.5.0 [ 1.241324] ILITEK:INFO (ilitek_tddi_ic_get_fw_ver, 879): [Vendor]Tianma(TP) + Tianma(LCD), [TP-IC]ILITEK9881H, [FW]Ver:4.1.22.0 [ 1.241329] ILITEK:INFO (ilitek_tddi_ic_get_core_ver, 828): Core version = 1.4.0.0 [ 1.241335] ILITEK:INFO (ilitek_tddi_ic_get_tp_info, 1009): TP Info: xch = 18, ych = 32, stx = 18, srx = 32, max_x = 2047, max_y = 2047 [ 1.241335] [ 1.241340] ILITEK:INFO (ilitek_tddi_ic_get_panel_info, 918): Panel info: width = 720, height = 1520 [ 1.241345] ILITEK:INFO (ilitek_plat_input_register, 40): [ 1.241463] input: ILITEK_TDDI as /devices/platform/soc/78b7000.spi/spi_master/spi3/spi3.0/input/input3 [ 1.379722] msm_cci_init:1446: hw_version = 0x10020004 [ 1.655667] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 [ 1.665211] msm_cci_init:1446: hw_version = 0x10020004 [ 1.919199] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 [ 1.928864] msm_cci_init:1446: hw_version = 0x10020004 [ 2.188627] msm_cci_init:1446: hw_version = 0x10020004 [ 2.188790] msm_cci_irq:1819 MASTER_0 error 0x10000000 [ 2.188823] msm_cci_i2c_read:966 read_words = 0, exp words = 4 [ 2.188830] msm_cci_i2c_read_bytes:1049 failed rc -22 [ 2.188852] read_eeprom_memory: read failed [ 2.188857] msm_eeprom_platform_probe read_eeprom_memory failed [ 2.197103] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@6 failed with error -22 [ 2.206840] msm_cci_init:1446: hw_version = 0x10020004 [ 2.207000] msm_cci_irq:1819 MASTER_0 error 0x10000000 [ 2.207031] msm_cci_i2c_read:966 read_words = 0, exp words = 4 [ 2.207037] msm_cci_i2c_read_bytes:1049 failed rc -22 [ 2.207059] read_eeprom_memory: read failed [ 2.207064] msm_eeprom_platform_probe read_eeprom_memory failed [ 2.215335] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@7 failed with error -22 [ 2.221656] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030002 [ 2.221669] MSM-CPP cpp_init_hardware:1151 stream_cnt:0 [ 2.221801] MSM-CPP cpp_release_hardware:1214 cpp hw release done [ 2.223682] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found [ 2.223690] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found [ 2.223796] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk [ 2.224455] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found [ 2.224462] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found [ 2.224554] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk [ 2.225946] __msm_jpeg_init:1591] Jpeg Device id 0 [ 2.226126] CHRDEV "jpeg0" major number 228 goes below the dynamic allocation range [ 2.226844] usbcore: registered new interface driver uvcvideo [ 2.226849] USB Video Class driver (1.1.1) [ 2.228833] sw_jeita_enable = 0, hw_jeita_enable = 1 [ 2.228941] PL_DISABLE: effective vote is now 1 voted by CHG_STATE_VOTER,0 [ 2.731666] msm_otg 78db000.usb: phy_reset: success [ 2.840413] msm_otg 78db000.usb: non-drive mode value 0x55 [ 2.840527] msm_otg 78db000.usb: non-drive mode value 0x4d [ 2.840699] USB_ICL: effective vote is now -22 voted by (null),-22 [ 2.840707] DC_SUSPEND: effective vote is now 0 voted by DEFAULT_VOTER,0 [ 2.840713] FCC: effective vote is now -22 voted by (null),-22 [ 2.840720] FV: effective vote is now 4400000 voted by HW_LIMIT_VOTER,0 [ 2.840726] FCC: effective vote is now 2000000 voted by BATT_PROFILE_VOTER,1 [ 2.840733] USB_ICL: effective vote is now 2000000 voted by HW_LIMIT_VOTER,1 [ 2.840754] CHG_DISABLE: effective vote is now 0 voted by DEFAULT_VOTER,0 [ 2.841693] pmi632_charger: smblib_usb_plugin_locked: attach_time = 4294937580 [ 2.841701] AWAKE: effective vote is now 1 voted by PL_DELAY_VOTER,0 [ 2.842631] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00,APSD_RESULT = 0x00 [ 2.842903] PL_ENABLE_INDIRECT: effective vote is now 1 voted by USBIN_I_VOTER,0 [ 2.843202] pmi632_charger: smblib_eval_chg_termination: Couldn't read SOC value, rc=-22 [ 2.850857] SMB5 status - usb:present=1 type=0 batt:present = 1 health = 1 charge = 4 [ 2.850902] QPNP SMB5 probed successfully [ 2.853345] thermal thermal_zone1: failed to read out thermal zone (-517) [ 2.875715] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.875730] thermal thermal_zone39: failed to read out thermal zone (-61) [ 2.875793] IRQ16 no longer affine to CPU0 [ 2.875801] IRQ21 no longer affine to CPU0 [ 2.876180] IRQ16 no longer affine to CPU1 [ 2.876186] IRQ21 no longer affine to CPU1 [ 2.876448] IRQ16 no longer affine to CPU2 [ 2.876455] IRQ21 no longer affine to CPU2 [ 2.876713] IRQ16 no longer affine to CPU3 [ 2.876720] IRQ21 no longer affine to CPU3 [ 2.876958] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.876966] thermal thermal_zone39: failed to read out thermal zone (-61) [ 2.876996] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.887724] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 2.891733] pmi632_charger: smblib_set_prop_system_temp_level: system_temp_level = 1, ibus =2000000 [ 2.891756] pmi632_charger: smblib_set_prop_system_temp_level: system_temp_level = 1, ibus =2000000 [ 2.891765] pmi632_charger: smblib_set_prop_system_temp_level: system_temp_level = 1, ibus =2000000 [ 2.891774] pmi632_charger: smblib_set_prop_system_temp_level: system_temp_level = 1, ibus =2000000 [ 2.891784] pmi632_charger: smblib_set_prop_system_temp_level: system_temp_level = 1, ibus =2000000 [ 2.908074] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 2.911109] pmi632_charger: smblib_eval_chg_termination: Couldn't read SOC value, rc=-22 [ 2.911474] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.922712] pmi632_charger: smblib_eval_chg_termination: Couldn't read SOC value, rc=-22 [ 2.923021] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.932785] device-mapper: uevent: version 1.0.3 [ 2.932957] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.933185] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 2.933185] [ 2.933947] CHRDEV "bt" major number 227 goes below the dynamic allocation range [ 2.934049] sdhci: Secure Digital Host Controller Interface driver [ 2.934054] sdhci: Copyright(c) Pierre Ossman [ 2.934059] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.935405] qcom_ice_get_pdevice: found ice device c3c3af00 [ 2.935415] qcom_ice_get_pdevice: matching platform device e95f8c00 [ 2.936092] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 2.937176] qpnp_vibrator_ldo_probe: Vibrator LDO successfully registered: uV = 2800000, overdrive = disabled [ 2.937358] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xee908000 [ 2.938104] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in CMDQ mode [ 2.938384] usbcore: registered new interface driver usbhid [ 2.938389] usbhid: USB HID core driver [ 2.938503] ashmem: initialized [ 2.938960] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm [ 2.956446] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 2.959467] pmi632_charger: smblib_eval_chg_termination: Couldn't read SOC value, rc=-22 [ 2.959883] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.970211] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 2.970221] thermal thermal_zone39: failed to read out thermal zone (-61) [ 2.971075] pmi632_charger: smblib_eval_chg_termination: Couldn't read SOC value, rc=-22 [ 2.971461] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 3.021863] mmc0: Out-of-interrupt timeout is 100[ms] [ 3.021871] mmc0: eMMC FW version: 3030303600000000 [ 3.021875] mmc0: CMDQ supported: depth: 32 [ 3.021880] mmc0: cache barrier support 1 flush policy 1 [ 3.027826] cmdq_host_alloc_tdl: desc_size: 512 data_sz: 31744 slot-sz: 16 [ 3.027953] mmc0: CMDQ enabled on card [ 3.027966] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.028696] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 [ 3.028705] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1 [ 3.028810] mmcblk0: mmc0:0001 hB8aP> 29.1 GiB [ 3.029074] mmcblk0rpmb: mmc0:0001 hB8aP> partition 3 16.0 MiB [ 3.030756] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 [ 3.035878] mmc_ffu start,mid:144,name:hB8aP>,fw_ver:0x3030303600000000 prv:3 [ 3.035886] the emmc fw_version has updated to 0x3030303600000000 [ 3.035891] the emmc fw_version has updated to 0x3030303600000000 [ 3.035895] mmc_ffu end [ 3.037211] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled [ 3.050229] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode [ 3.062072] pmi632_charger: smblib_eval_chg_termination: Couldn't read SOC value, rc=-22 [ 3.062507] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 3.081130] bcl_soc:bcl_read_soc battery percentage read error:-61 [ 3.081140] thermal thermal_zone39: failed to read out thermal zone (-61) [ 3.081758] tz_log 8600720.tz-log: Hyp log service is not supported [ 3.082720] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. [ 3.085566] CHRDEV "sensors" major number 226 goes below the dynamic allocation range [ 3.085930] usbcore: registered new interface driver snd-usb-audio [ 3.086516] u32 classifier [ 3.086522] Actions configured [ 3.086531] Netfilter messages via NETLINK v0.30. [ 3.086700] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.086880] ctnetlink v0.93: registering with nfnetlink. [ 3.087238] xt_time: kernel timezone is -0000 [ 3.087329] IPv4 over IPsec tunneling driver [ 3.087734] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.087868] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.087908] Initializing XFRM netlink socket [ 3.088205] NET: Registered protocol family 10 [ 3.089104] mip6: Mobile IPv6 [ 3.089132] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.089697] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.090503] NET: Registered protocol family 17 [ 3.090521] NET: Registered protocol family 15 [ 3.090544] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.090550] Ebtables v2.0 registered [ 3.090627] l2tp_core: L2TP core driver, V2.0 [ 3.090638] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.090643] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 3.090659] l2tp_netlink: L2TP netlink interface [ 3.090685] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 3.090690] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 3.090728] sctp: Hash tables configured (bind 512/512) [ 3.091490] NET: Registered protocol family 27 [ 3.095606] minidump-id not found for adsp [ 3.095825] subsys-pil-tz c200000.qcom,lpass: for adsp segments only will be dumped. [ 3.097580] minidump-id not found for wcnss [ 3.097712] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. [ 3.098332] minidump-id not found for modem [ 3.098706] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. [ 3.098768] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped. [ 3.100380] msm_otg 78db000.usb: phy_reset: success [ 3.112582] QG-K: qg_load_battery_profile: batt_id_ohm=330033 [ 3.112587] SUNWODA match succ. [ 3.112592] QG-K: qg_load_battery_profile: batt_id=330033 [ 3.112716] of_batterydata_get_best_profile: dhx batt_ids.kohm = 330 [ 3.112722] of_batterydata_get_best_profile: dhx batt_ids.kohm = 100 [ 3.112727] of_batterydata_get_best_profile: dhx batt_ids.kohm = 200 [ 3.112733] of_batterydata_get_best_profile: checknum = 0,best_id_kohm = 330, batt_id_kohm = 330,match = 1,id_range_pct = 10 [ 3.112739] of_batterydata_get_best_profile: SWD-5000mah-330kohm found [ 3.112748] CHRDEV "qg_battery" major number 225 goes below the dynamic allocation range [ 3.113078] QG-K: qg_batterydata_init: QG Battery-profile loaded, '/dev/qg_battery' created! [ 3.113087] QG-K: qg_setup_battery: battery_missing=0 batt_id_ohm=330033 Ohm profile_loaded=1 profile=SWD-5000mah-330kohm [ 3.113093] CHRDEV "qg" major number 224 goes below the dynamic allocation range [ 3.115093] QG-K: qg_determine_pon_soc: using SHUTDOWN_SOC @ PON ocv_uv=4366100uV soc=100 [ 3.116428] QG-K: qpnp_qg_probe: QG initialized! battery_profile=SWD-5000mah-330kohm SOC=100 [ 3.117467] Registering SWP/SWPB emulation handler [ 3.117491] core_ctl: Creating CPU group 0 [ 3.117496] core_ctl: Init CPU0 state [ 3.117500] core_ctl: Init CPU1 state [ 3.117504] core_ctl: Init CPU2 state [ 3.117508] core_ctl: Init CPU3 state [ 3.117637] core_ctl: Creating CPU group 4 [ 3.117642] core_ctl: Init CPU4 state [ 3.117647] core_ctl: Init CPU5 state [ 3.117651] core_ctl: Init CPU6 state [ 3.117655] core_ctl: Init CPU7 state [ 3.118010] registered taskstats version 1 [ 3.118025] Loading compiled-in X.509 certificates [ 3.122392] Loaded X.509 cert 'Build time autogenerated kernel key: 97daeb21a5ad69aed195adfef47a3ff4fcaf1e6b' [ 3.123994] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully [ 3.125166] of_batterydata_get_best_profile: dhx batt_ids.kohm = 330 [ 3.125173] of_batterydata_get_best_profile: dhx batt_ids.kohm = 100 [ 3.125179] of_batterydata_get_best_profile: dhx batt_ids.kohm = 200 [ 3.125185] of_batterydata_get_best_profile: checknum = 0,best_id_kohm = 330, batt_id_kohm = 330,match = 1,id_range_pct = 10 [ 3.125191] of_batterydata_get_best_profile: SWD-5000mah-330kohm found [ 3.125653] FCC: effective vote is now 3000000 voted by BATT_PROFILE_VOTER,1 [ 3.129007] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 12 [ 3.130223] CHRDEV "adsprpc-smd" major number 223 goes below the dynamic allocation range [ 3.130475] ------------[ cut here ]------------ [ 3.130490] WARNING: CPU: 4 PID: 1 at /home/work/olivelite-q-stable-build/kernel/msm-4.9/fs/proc/generic.c:345 proc_register+0x100/0x120 [ 3.130496] proc_dir_entry '/proc/cpumaxfreq' already registered [ 3.130500] Modules linked in: [ 3.130510] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 4.9.193-perf-g1011f5b #1 [ 3.130514] Hardware name: Qualcomm Technologies, Inc. SDM439 (Flattened Device Tree) [ 3.130532] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.130542] [] (show_stack) from [] (dump_stack+0x94/0xa8) [ 3.130554] [] (dump_stack) from [] (__warn+0xf8/0x110) [ 3.130564] [] (__warn) from [] (warn_slowpath_fmt+0x58/0x74) [ 3.130574] [] (warn_slowpath_fmt) from [] (proc_register+0x100/0x120) [ 3.130584] [] (proc_register) from [] (proc_create_data+0x88/0xcc) [ 3.130594] [] (proc_create_data) from [] (create_fs+0x34/0xb4) [ 3.130606] [] (create_fs) from [] (mi_fs_init+0x10/0x18) [ 3.130616] [] (mi_fs_init) from [] (do_one_initcall+0x60/0x1a4) [ 3.130627] [] (do_one_initcall) from [] (kernel_init_freeable+0x200/0x2bc) [ 3.130639] [] (kernel_init_freeable) from [] (kernel_init+0x18/0x158) [ 3.130650] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 3.130681] ---[ end trace 896f8dfe13aa5295 ]--- [ 3.132258] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input4 [ 3.132633] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: setting system clock to 1971-09-26 23:50:47 UTC (54777047) [ 3.133777] POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:5000000 [ 3.133804] power_supply bms: driver failed to report `cc_soc' property: -22 [ 3.133908] cpuidle: enable-method property 'psci' found operations [ 3.133915] cpuidle: enable-method property 'psci' found operations [ 3.133921] cpuidle: enable-method property 'psci' found operations [ 3.133926] cpuidle: enable-method property 'psci' found operations [ 3.133931] cpuidle: enable-method property 'psci' found operations [ 3.133937] cpuidle: enable-method property 'psci' found operations [ 3.133942] cpuidle: enable-method property 'psci' found operations [ 3.133947] cpuidle: enable-method property 'psci' found operations [ 3.134142] lpm_levels_of: idx 1 900 [ 3.134260] lpm_levels_of: Residency < 0 for LPM [ 3.134264] lpm_levels_of: idx 1 400 [ 3.134455] lpm_levels: register_cluster_lpm_stats() [ 3.134666] lpm_levels: register_cluster_lpm_stats() [ 3.135545] QG_WS: effective vote is now 1 voted by TTF_AWAKE_VOTER,0 [ 3.140416] RNDIS_IPA module is loaded. [ 3.140435] clock_late_init: Removing enables held for handed-off clocks [ 3.144428] apc_mem_acc_corner: disabling [ 3.144473] dbu1: disabling [ 3.144496] ALSA device list: [ 3.144501] No soundcards found. [ 3.144547] Warning: unable to open an initial console. [ 3.145525] Freeing unused kernel memory: 1024K [ 3.150247] init: init first stage started! [ 3.150291] init: First stage mount skipped (recovery mode) [ 3.150529] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 3.151529] init: [libfs_mgr]Error parsing fs_mgr_options [ 3.151561] init: [libfs_mgr]fs_mgr_read_fstab(): failed to load fstab from : '/etc/recovery.fstab' [ 3.210410] msm_otg 78db000.usb: non-drive mode value 0x55 [ 3.211385] ipa_get_transport_type:2724 IPA HW is not supported [ 3.213493] msm_otg 78db000.usb: USB in low power mode [ 3.215656] POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:5000000 [ 3.215677] power_supply bms: driver failed to report `cc_soc' property: -22 [ 3.216705] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 3.237071] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 3.251502] init: [libfs_mgr]Returning avb_handle with status: 3 [ 3.251694] init: Loading SELinux policy [ 3.255111] SELinux: 8192 avtab hash slots, 16624 rules. [ 3.261355] SELinux: 8192 avtab hash slots, 16624 rules. [ 3.261363] SELinux: 1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats [ 3.261368] SELinux: 93 classes, 16624 rules [ 3.263828] SELinux: Completing initialization. [ 3.263830] SELinux: Setting up existing superblocks. [ 3.316519] mmc1: new ultra high speed SDR104 SDXC card at address aaaa [ 3.317251] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 [ 3.317262] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1 [ 3.317359] mmcblk1: mmc1:aaaa SP128 119 GiB [ 3.320121] mmcblk1: p1 p2 p3 [ 3.320612] mmc_ffu start,mid:3,name:SP128,fw_ver:0x0 prv:0 [ 3.320617] mmc_ffu end [ 3.364054] audit: type=1403 audit(54777047.719:2): policy loaded auid=4294967295 ses=4294967295 [ 3.364233] selinux: SELinux: Loaded policy from /sepolicy [ 3.364233] [ 3.366759] selinux: SELinux: Loaded file_contexts [ 3.366759] [ 3.369562] init: init second stage started! [ 3.376494] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 3.379332] selinux: SELinux: Loaded file_contexts [ 3.379332] [ 3.379347] init: Running restorecon... [ 3.385240] init: waitid failed: No child processes [ 3.385294] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory [ 3.386328] init: Unable to set property 'ro.secure' to '1' in property file '/prop.default': Read-only property was already set [ 3.386365] init: Unable to set property 'ro.boot.avb_version' to '1.0' in property file '/prop.default': Read-only property was already set [ 3.386452] init: Unable to set property 'ro.secure' to '1' in property file '/prop.default': Read-only property was already set [ 3.386474] init: Unable to set property 'ro.adb.secure' to '0' in property file '/prop.default': Read-only property was already set [ 3.389917] audit: type=1400 audit(54777047.739:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1 [ 3.394662] ueventd: ueventd started! [ 3.397402] selinux: SELinux: Loaded file_contexts [ 3.397402] [ 3.397460] ueventd: Parsing file /ueventd.rc... [ 3.398264] ueventd: Parsing file /vendor/ueventd.rc... [ 3.398301] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory [ 3.398324] ueventd: Parsing file /odm/ueventd.rc... [ 3.398352] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory [ 3.398431] ueventd: Parsing file /ueventd.qcom.rc... [ 3.398459] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory [ 3.398859] ueventd: [libfs_mgr]Error parsing fs_mgr_options [ 3.444165] POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:5000000 [ 3.444190] power_supply bms: driver failed to report `cc_soc' property: -22 [ 3.445786] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 3.464915] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = UNKNOWN [ 3.576426] audit: type=1400 audit(54777047.929:4): avc: denied { create } for pid=1 comm="init" name="bin" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=1 [ 3.576853] audit: type=1400 audit(54777047.929:5): avc: denied { create } for pid=1 comm="init" name="sh" scontext=u:r:init:s0 tcontext=u:object_r:shell_exec:s0 tclass=lnk_file permissive=1 [ 3.577064] audit: type=1400 audit(54777047.929:6): avc: denied { create } for pid=1 comm="init" name="manifest.xml" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file permissive=1 [ 3.580902] audit: type=1400 audit(54777047.939:7): avc: denied { module_request } for pid=1 comm="init" kmod="fs-functionfs" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1 [ 3.584406] audit: type=1400 audit(54777047.939:8): avc: denied { entrypoint } for pid=402 comm="init" path="/sbin/logd" dev="rootfs" ino=11423 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 3.584865] audit: type=1400 audit(54777047.939:9): avc: denied { read execute } for pid=402 comm="logd" path="/sbin/logd" dev="rootfs" ino=11423 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 3.585697] audit: type=1400 audit(54777047.939:10): avc: denied { getattr } for pid=402 comm="logd" path="/sbin/logd" dev="rootfs" ino=11423 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 3.589611] Mass Storage Function, version: 2009/09/11 [ 3.589626] LUN: removable file: (no medium) [ 3.591293] file system registered [ 3.591774] CHRDEV "msm_usb_bridge" major number 222 goes below the dynamic allocation range [ 3.600410] f_cdev_alloc: port_name:at_usb0 (00000000) portno:(0) [ 3.601033] f_cdev_alloc: port_name:at_usb1 (00000000) portno:(1) [ 3.601119] logd: failed to set AID_LOGD uid [ 3.601609] f_cdev_alloc: port_name:at_usb2 (00000000) portno:(2) [ 3.601708] logd: Cannot read /system/etc/event-log-tags [ 3.602707] logd.auditd: start [ 3.602730] logd.klogd: 3602708227 [ 3.603641] CHRDEV "usb_rndis" major number 221 goes below the dynamic allocation range [ 3.632646] type=1400 audit(54777047.959:12): avc: denied { read } for pid=399 comm="hwservicemanage" name="plat_hwservice_contexts" dev="rootfs" ino=11211 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1 [ 3.632752] type=1400 audit(54777047.959:12): avc: denied { read } for pid=399 comm="hwservicemanage" name="plat_hwservice_contexts" dev="rootfs" ino=11211 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1 [ 3.632776] type=1400 audit(54777047.959:13): avc: denied { open } for pid=399 comm="hwservicemanage" path="/vendor_hwservice_contexts" dev="rootfs" ino=11696 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1 [ 3.634330] type=1400 audit(54777047.959:13): avc: denied { open } for pid=399 comm="hwservicemanage" path="/vendor_hwservice_contexts" dev="rootfs" ino=11696 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1 [ 3.634366] type=1400 audit(54777047.959:14): avc: denied { write } for pid=407 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1 [ 3.634566] type=1400 audit(54777047.959:14): avc: denied { write } for pid=407 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1 [ 3.647470] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.648036] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.649573] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.650442] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.653391] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.655147] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.656286] scm_call failed: func id 0x32000206, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.674153] ILITEK:INFO (ilitek_tddi_sleep_handler, 362): TP normal suspend start [ 3.674157] ILITEK:INFO (ilitek_tddi_ic_func_ctrl, 385): func = sense, len = 3, cmd = 0x1, 01, 0x0 [ 3.682492] ILITEK:INFO (core_spi_ice_mode_read, 428): WARRING! size(2) > len(1), use len to get data [ 3.683146] ILITEK:INFO (ilitek_tddi_ic_check_busy, 723): Check busy free [ 3.683152] ILITEK:INFO (ilitek_tddi_ic_func_ctrl, 385): func = sleep, len = 3, cmd = 0x1, 02, 0x3 [ 3.684327] ILITEK:INFO (ilitek_tddi_sleep_handler, 379): TP normal suspend end [ 3.685260] lcd-time event unblank begin! [ 3.685304] lcd-time event unblank end! [ 3.699739] lcd-time event blank begin! [ 3.699741] lcd-time event blank end! [ 3.986462] mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi rootwait ro init=/init androidboot.dtbo_idx=6 res=-1 [ 3.986464] mdss_dsi_panel_reset: ILITEK LCD Call TP Reset start! [ 3.986476] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [ 3.986798] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [ 3.989216] ILITEK:INFO (ilitek_tddi_reset_ctrl, 672): TP HW RST [ 4.000224] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [ 4.000510] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [ 4.000660] ILITEK:INFO (ilitek_tddi_fw_upgrade, 1430): Convert FW file from HEX_FILE [ 4.000663] ILITEK:INFO (ilitek_tdd_fw_hex_open, 1313): Open file method = FILP_OPEN, path = /vendor/firmware/ILITEK_FW [ 4.000718] ILITEK:ERR (ilitek_tdd_fw_hex_open, 1344): Failed to open the file at -2. [ 4.000720] ILITEK:ERR (ilitek_tddi_fw_upgrade, 1434): Open hex file fail, try upgrade from ILI file [ 4.000722] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1146): Start to parse ILI file, type = 159, block_count = 5 [ 4.000725] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[1]: start_addr = 0, end = ffff [ 4.000728] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[2]: start_addr = 10000, end = 11fff [ 4.000730] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[3]: start_addr = 12000, end = 121ff [ 4.000733] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[4]: start_addr = 1d000, end = 1efff [ 4.000735] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[5]: start_addr = 13000, end = 1cfff [ 4.000738] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1193): Tag 0xB0: change Block[2] to addr = 0x20870 [ 4.000740] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1193): Tag 0xB0: change Block[3] to addr = 0x20670 [ 4.000803] ILITEK:INFO (ilitek_tddi_fw_update_block_info, 1136): New FW ver = 0x4011600 [ 4.000806] ILITEK:INFO (ilitek_tddi_fw_update_block_info, 1137): star_addr = 0x000000, end_addr = 0x01F000, Block Num = 5 [ 4.001489] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download AP code from hex 0x0 to IRAM 0x0, len = 0x10000 [ 4.002525] mdss_dsi_panel_reset: ILITEK LCD Call TP Reset end! [ 4.037530] lcd-time event unblank begin! [ 4.079143] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): AP CRC is Correct ! (f56fa10e) : (f56fa10e) [ 4.079147] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download DATA code from hex 0x10000 to IRAM 0x20870, len = 0x2000 [ 4.091110] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): DATA CRC is Correct ! (18dcba9) : (18dcba9) [ 4.091113] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download TUNING code from hex 0x12000 to IRAM 0x20670, len = 0x200 [ 4.094777] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): TUNING CRC is Correct ! (17d552db) : (17d552db) [ 4.094780] ILITEK:INFO (ilitek_tddi_reset_ctrl, 660): TP IC Code RST [ 4.094878] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Disable ICE mode, mcu on = 0 [ 4.183206] mdss_dsi_cmds_tx: failed to call [ 4.183560] lcd-time event unblank end! [ 4.183989] [ktd]ktd3137_brightness_set brightness = 127 [ 4.183989] [ 4.194996] ILITEK:INFO (ilitek_tddi_fw_check_update, 1389): FW upgrade PASS [ 4.195018] ILITEK:INFO (ilitek_tddi_fw_upgrade_handler, 475): Flash FW completed ... update TP/FW info [ 4.195021] ILITEK:INFO (ilitek_tddi_ic_check_protocol_ver, 1018): same procotol version, do nothing [ 4.195023] ILITEK:INFO (ilitek_tddi_ic_get_protocl_ver, 1081): Protocol version = 5.5.0 [ 4.195028] ILITEK:INFO (ilitek_tddi_ic_get_fw_ver, 879): [Vendor]Tianma(TP) + Tianma(LCD), [TP-IC]ILITEK9881H, [FW]Ver:4.1.22.0 [ 4.195031] [hq_regiser_hw_info]: device has already registed hw->id:0x23 hw_device_name:[Vendor]Tianma(TP) + Tianma(LCD), [TP-IC]ILITEK9881H, [FW]Ver:4.1.22.0 [ 4.195031] [ 4.195034] ILITEK:INFO (ilitek_tddi_ic_get_core_ver, 828): Core version = 1.4.0.0 [ 4.195038] ILITEK:INFO (ilitek_tddi_ic_get_tp_info, 1009): TP Info: xch = 18, ych = 32, stx = 18, srx = 32, max_x = 2047, max_y = 2047 [ 4.195038] [ 4.195041] ILITEK:INFO (ilitek_tddi_ic_get_panel_info, 918): Panel info: width = 720, height = 1520 [ 4.212477] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01,APSD_RESULT = 0x01 [ 4.212517] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 4.212522] PL_ENABLE_INDIRECT: effective vote is now 0 voted by USBIN_I_VOTER,0 [ 4.215306] msm_otg 78db000.usb: phy_reset: success [ 4.240250] of_batterydata_get_best_profile: dhx batt_ids.kohm = 330 [ 4.240264] of_batterydata_get_best_profile: dhx batt_ids.kohm = 100 [ 4.240269] of_batterydata_get_best_profile: dhx batt_ids.kohm = 200 [ 4.240276] of_batterydata_get_best_profile: checknum = 0,best_id_kohm = 330, batt_id_kohm = 330,match = 1,id_range_pct = 10 [ 4.240283] of_batterydata_get_best_profile: SWD-5000mah-330kohm found [ 4.240292] QCOM-STEPCHG: read_range_data_from_node: Count qcom,step-chg-ranges failed, rc=-22 [ 4.240299] QCOM-STEPCHG: read_range_data_from_node: Count qcom,jeita-fcc-ranges failed, rc=-22 [ 4.240304] QCOM-STEPCHG: read_range_data_from_node: Count qcom,jeita-fv-ranges failed, rc=-22 [ 4.267541] [ktd]ktd3137_brightness_set brightness = 489 [ 4.267541] [ 4.289021] EXT4-fs (mmcblk0p59): mounted filesystem without journal. Opts: [ 4.320409] msm_otg 78db000.usb: USB exited from low power mode [ 4.320430] msm_otg 78db000.usb: non-drive mode value 0x55 [ 4.381184] EXT4-fs (mmcblk0p48): recovery complete [ 4.381646] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: [ 4.382921] SELinux: Context u:object_r:persist_time_file:s0 is not valid (left unmapped). [ 4.459913] EXT4-fs (mmcblk0p62): 4 orphan inodes deleted [ 4.459926] EXT4-fs (mmcblk0p62): recovery complete [ 4.463743] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts: [ 4.476099] mdss_fb_do_ioctl: unsupported ioctl (5401) [ 4.575492] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts: [ 4.588150] mdss_fb_do_ioctl: unsupported ioctl (5401) [ 4.642798] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)" [ 4.712889] EXT4-fs (mmcblk0p57): recovery complete [ 4.713388] EXT4-fs (mmcblk0p57): mounted filesystem with ordered data mode. Opts: [ 5.807989] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts: [ 5.821400] mdss_fb_do_ioctl: unsupported ioctl (5401) [ 6.664249] SELinux: Context u:object_r:mqsas_data_file:s0 is not valid (left unmapped). [ 6.678532] SELinux: Context u:object_r:whetstone_data_file:s0 is not valid (left unmapped). [ 6.680197] SELinux: Context u:object_r:migt_file:s0 is not valid (left unmapped). [ 6.685740] SELinux: Context u:object_r:theme_data_file:s0 is not valid (left unmapped). [ 6.686837] SELinux: Context u:object_r:miui_native_file:s0 is not valid (left unmapped). [ 6.687529] SELinux: Context u:object_r:mcd_data_file:s0 is not valid (left unmapped). [ 6.706014] SELinux: Context u:object_r:data_qtee_file:s0 is not valid (left unmapped). [ 6.706580] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped). [ 6.707135] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped). [ 6.708169] SELinux: Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped). [ 6.708861] SELinux: Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped). [ 6.712698] SELinux: Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped). [ 6.713248] SELinux: Context u:object_r:wigig_hostapd_socket:s0 is not valid (left unmapped). [ 6.713829] SELinux: Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped). [ 6.714665] SELinux: Context u:object_r:ramdump_vendor_data_file:s0 is not valid (left unmapped). [ 6.715219] SELinux: Context u:object_r:data_tzstorage_file:s0 is not valid (left unmapped). [ 6.715790] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped). [ 6.717332] SELinux: Context u:object_r:thermal_data_file:s0 is not valid (left unmapped). [ 6.718205] SELinux: Context u:object_r:scancode_file:s0 is not valid (left unmapped). [ 6.718874] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped). [ 6.719513] SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped). [ 6.720169] SELinux: Context u:object_r:vendor_fm_data_file:s0 is not valid (left unmapped). [ 6.720829] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped). [ 6.721415] SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped). [ 6.721980] SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped). [ 6.722868] SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped). [ 6.723437] SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped). [ 6.724353] SELinux: Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped). [ 6.724906] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped). [ 6.844889] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped). [ 6.845498] SELinux: Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped). [ 6.846619] SELinux: Context u:object_r:lm_data_file:s0 is not valid (left unmapped). [ 6.847171] SELinux: Context u:object_r:vendor_ramdump_data_file:s0 is not valid (left unmapped). [ 6.848082] SELinux: Context u:object_r:hbtp_log_file:s0 is not valid (left unmapped). [ 6.848634] SELinux: Context u:object_r:ta_data_file:s0 is not valid (left unmapped). [ 6.849530] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped). [ 6.851281] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped). [ 6.851852] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped). [ 6.852729] SELinux: Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped). [ 6.853287] SELinux: Context u:object_r:chargelogger_data_file:s0 is not valid (left unmapped). [ 6.853906] SELinux: Context u:object_r:vendor_qdma_data_file:s0 is not valid (left unmapped). [ 6.854479] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped). [ 6.856463] SELinux: Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped). [ 6.857028] SELinux: Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped). [ 6.857595] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped). [ 6.858615] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped). [ 6.858962] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped). [ 6.862041] audit_log_lost: 9 callbacks suppressed [ 6.862044] audit: audit_lost=322 audit_rate_limit=5 audit_backlog_limit=64 [ 6.862056] audit: rate limit exceeded [ 6.866229] SELinux: Context u:object_r:miui_pai_file:s0 is not valid (left unmapped). [ 7.340624] EXT4-fs (mmcblk0p59): mounted filesystem without journal. Opts: [ 7.408604] EXT4-fs (mmcblk0p59): mounted filesystem without journal. Opts: [ 7.499005] EXT4-fs (mmcblk0p60): mounted filesystem without journal. Opts: [ 7.589015] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: [ 7.639801] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: [ 7.681046] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts: [ 7.681112] SELinux: Context u:object_r:adsprpcd_file:s0 is not valid (left unmapped). [ 7.711088] EXT4-fs (mmcblk0p61): mounted filesystem with ordered data mode. Opts: [ 7.992859] EXT4-fs (mmcblk1p1): Unrecognized mount option "utf8" or missing value [ 7.998262] EXT4-fs (mmcblk1p1): warning: mounting unchecked fs, running e2fsck is recommended [ 8.016930] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 8.067898] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts: [ 8.081398] mdss_fb_do_ioctl: unsupported ioctl (5401) [ 8.610217] init: starting service 'adbd'... [ 8.611643] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000 [ 8.617148] read descriptors [ 8.617357] read strings [ 8.618062] init: processing action (sys.usb.config=adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:113) [ 8.619991] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32 [ 8.620024] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received [ 8.620117] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received [ 8.620128] msm_hsusb msm_hsusb: [ci13xxx_pullup] ci13xxx_pullup,softconnec=0,is_active=1 [ 8.620128] [ 8.620136] msm_hsusb msm_hsusb: [ci13xxx_pullup] ci13xxx_pullup [ 8.620136] [ 8.620141] xbt phy->flags=1 [ 8.620146] xbt phy->flags=1, ENABLE_DP_MANUAL_PULLUP [ 8.720326] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received [ 8.720515] android_work: did not send uevent (0 0 00000000) [ 8.720624] init: Command 'write /config/usb_gadget/g1/UDC ${sys.usb.controller}' action=sys.usb.config=adb && sys.usb.ffs.ready=1 (/init.recovery.usb.rc:123) took 101ms and succeeded [ 8.826631] type=1400 audit(1627241891.635:355): avc: denied { open } for pid=404 comm="recovery" path="/data/local" dev="mmcblk0p62" ino=771073 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1 [ 8.826663] type=1400 audit(1627241893.595:384): avc: denied { getattr } for pid=404 comm="recovery" path="/data/data/com.android.htmlviewer" dev="mmcblk0p62" ino=1028580 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c97,c256,c512,c768 tclass=dir permissive=1 [ 8.826770] type=1400 audit(1627241893.595:384): avc: denied { getattr } for pid=404 comm="recovery" path="/data/data/com.android.htmlviewer" dev="mmcblk0p62" ino=1028580 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c97,c256,c512,c768 tclass=dir permissive=1 [ 8.826794] type=1400 audit(1627241893.595:385): avc: denied { read } for pid=404 comm="recovery" name="com.android.htmlviewer" dev="mmcblk0p62" ino=1028580 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c97,c256,c512,c768 tclass=dir permissive=1 [ 8.826868] type=1400 audit(1627241893.595:385): avc: denied { read } for pid=404 comm="recovery" name="com.android.htmlviewer" dev="mmcblk0p62" ino=1028580 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c97,c256,c512,c768 tclass=dir permissive=1 [ 8.826890] type=1400 audit(1627241893.595:386): avc: denied { open } for pid=404 comm="recovery" path="/data/data/com.android.htmlviewer" dev="mmcblk0p62" ino=1028580 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c97,c256,c512,c768 tclass=dir permissive=1 [ 8.848088] audit: audit_lost=350 audit_rate_limit=5 audit_backlog_limit=64 [ 8.848098] type=1400 audit(1627241893.595:386): avc: denied { open } for pid=404 comm="recovery" path="/data/data/com.android.htmlviewer" dev="mmcblk0p62" ino=1028580 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c97,c256,c512,c768 tclass=dir permissive=1 [ 8.848100] audit: rate limit exceeded [ 8.848132] type=1400 audit(1627241893.615:387): avc: denied { getattr } for pid=404 comm="recovery" path="/data/data/com.google.android.webview" dev="mmcblk0p62" ino=1028936 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c92,c256,c512,c768 tclass=dir permissive=1 [ 8.848235] type=1400 audit(1627241893.615:387): avc: denied { getattr } for pid=404 comm="recovery" path="/data/data/com.google.android.webview" dev="mmcblk0p62" ino=1028936 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c92,c256,c512,c768 tclass=dir permissive=1 [ 8.848257] type=1400 audit(1627241893.615:388): avc: denied { read } for pid=404 comm="recovery" name="com.google.android.webview" dev="mmcblk0p62" ino=1028936 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c92,c256,c512,c768 tclass=dir permissive=1 [ 8.859392] Trying to set usb power supply type 4 [ 8.859410] msm_otg 78db000.usb: Avail curr from USB = 100 [ 8.859451] android_work: did not send uevent (0 0 00000000) [ 8.904408] android_work: sent uevent USB_STATE=CONNECTED [ 8.908095] Trying to set usb power supply type 4 [ 8.908147] android_work: sent uevent USB_STATE=DISCONNECTED [ 8.998007] android_work: sent uevent USB_STATE=CONNECTED [ 9.106088] configfs-gadget gadget: high-speed config #1: b [ 9.106188] Trying to set usb power supply type 4 [ 9.106202] msm_otg 78db000.usb: Avail curr from USB = 500 [ 9.106228] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,6 [ 9.106314] android_work: sent uevent USB_STATE=CONFIGURED [ 9.488237] EXT4-fs (mmcblk0p59): mounted filesystem without journal. Opts: [ 9.548669] EXT4-fs (mmcblk0p59): mounted filesystem without journal. Opts: [ 9.610384] EXT4-fs (mmcblk0p60): mounted filesystem without journal. Opts: [ 9.689047] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: [ 9.729702] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: [ 9.780897] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts: [ 9.810952] EXT4-fs (mmcblk0p61): mounted filesystem with ordered data mode. Opts: [ 9.876798] EXT4-fs (mmcblk1p1): Unrecognized mount option "utf8" or missing value [ 9.882310] EXT4-fs (mmcblk1p1): warning: mounting unchecked fs, running e2fsck is recommended [ 9.890335] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 9.890488] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 9.896047] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 10.455120] audit: audit_lost=410 audit_rate_limit=5 audit_backlog_limit=64 [ 10.455133] audit: rate limit exceeded [ 10.590704] EXT4-fs (mmcblk1p1): Unrecognized mount option "utf8" or missing value [ 10.595781] EXT4-fs (mmcblk1p1): warning: mounting unchecked fs, running e2fsck is recommended [ 10.613776] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 10.616940] selinux: avc: denied { set } for property=sys.usb.config pid=404 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1 [ 10.616940] [ 10.617043] init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:84) [ 10.617313] msm_hsusb msm_hsusb: [ci13xxx_pullup] ci13xxx_pullup,softconnec=1,is_active=0 [ 10.617313] [ 10.617408] android_disconnect: gadget is not connected [ 10.617566] init: Sending signal 9 to service 'adbd' (pid 497) process group... [ 10.653768] libprocessgroup: Successfully killed process cgroup uid 0 pid 497 in 36ms [ 10.654378] init: Service 'adbd' (pid 497) received signal 9 [ 10.655040] init: processing action (sys.usb.config=mtp,adb) from (/init.recovery.usb.rc:93) [ 10.660820] read descriptors [ 10.660947] read strings [ 10.662835] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32 [ 10.662870] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received [ 10.662881] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received [ 10.662893] msm_hsusb msm_hsusb: [ci13xxx_pullup] ci13xxx_pullup,softconnec=0,is_active=1 [ 10.662893] [ 10.662900] msm_hsusb msm_hsusb: [ci13xxx_pullup] ci13xxx_pullup [ 10.662900] [ 10.662906] xbt phy->flags=1 [ 10.662911] xbt phy->flags=1, ENABLE_DP_MANUAL_PULLUP [ 10.763049] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received [ 10.763316] android_work: sent uevent USB_STATE=DISCONNECTED [ 10.894465] android_work: did not send uevent (0 0 00000000) [ 10.894482] Trying to set usb power supply type 4 [ 10.894493] msm_otg 78db000.usb: Avail curr from USB = 100 [ 10.894520] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 10.939588] android_work: sent uevent USB_STATE=CONNECTED [ 10.943311] android_work: sent uevent USB_STATE=DISCONNECTED [ 10.943325] Trying to set usb power supply type 4 [ 11.033154] android_work: sent uevent USB_STATE=CONNECTED [ 11.043958] configfs-gadget gadget: high-speed config #1: b [ 11.044060] Trying to set usb power supply type 4 [ 11.044072] msm_otg 78db000.usb: Avail curr from USB = 500 [ 11.044097] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,6 [ 11.044137] android_work: sent uevent USB_STATE=CONFIGURED [ 11.185118] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 11.190841] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 11.419672] mtp_open [ 11.420012] mtp_open [ 11.420081] mtp_open mtp_release not called returning EBUSY [ 11.420094] mtp_release [ 12.220310] mtp_open [ 13.315907] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 13.321629] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 16.160104] PL_AWAKE: effective vote is now 0 voted by PL_VOTER,0 [ 33.120090] AWAKE: effective vote is now 0 voted by PL_DELAY_VOTER,0 [ 38.240201] QG_WS: effective vote is now 0 voted by TTF_AWAKE_VOTER,0 [ 45.734660] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 45.734720] Trying to set usb power supply type 4 [ 45.734731] msm_otg 78db000.usb: Avail curr from USB = 2 [ 45.734752] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 47.187647] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 47.187784] mtp_release [ 47.187806] Trying to set usb power supply type 4 [ 47.187817] msm_otg 78db000.usb: Avail curr from USB = 100 [ 47.187840] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 47.188281] android_work: sent uevent USB_STATE=DISCONNECTED [ 47.195126] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 47.195147] Trying to set usb power supply type 4 [ 47.195157] msm_otg 78db000.usb: Avail curr from USB = 2 [ 47.195182] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 47.974267] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 47.974347] Trying to set usb power supply type 4 [ 47.974357] msm_otg 78db000.usb: Avail curr from USB = 100 [ 47.974379] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 47.974485] android_work: did not send uevent (0 0 00000000) [ 47.981754] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 47.981794] Trying to set usb power supply type 4 [ 47.981805] msm_otg 78db000.usb: Avail curr from USB = 2 [ 47.981826] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 47.987928] mtp_open [ 48.792142] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 48.792236] Trying to set usb power supply type 4 [ 48.792247] msm_otg 78db000.usb: Avail curr from USB = 100 [ 48.792267] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 48.792369] android_work: did not send uevent (0 0 00000000) [ 48.799619] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 48.799635] Trying to set usb power supply type 4 [ 48.799644] msm_otg 78db000.usb: Avail curr from USB = 2 [ 48.799662] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 48.803832] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 48.803906] Trying to set usb power supply type 4 [ 48.803916] msm_otg 78db000.usb: Avail curr from USB = 100 [ 48.803936] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 48.804032] android_work: did not send uevent (0 0 00000000) [ 48.873001] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 48.873041] Trying to set usb power supply type 4 [ 48.873051] msm_otg 78db000.usb: Avail curr from USB = 2 [ 48.873068] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 48.964585] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 48.964646] Trying to set usb power supply type 4 [ 48.964655] msm_otg 78db000.usb: Avail curr from USB = 100 [ 48.964678] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 48.964773] android_work: did not send uevent (0 0 00000000) [ 49.036597] android_work: sent uevent USB_STATE=CONNECTED [ 49.051930] configfs-gadget gadget: high-speed config #1: b [ 49.052138] android_work: sent uevent USB_STATE=CONFIGURED [ 49.052169] Trying to set usb power supply type 4 [ 49.052181] msm_otg 78db000.usb: Avail curr from USB = 500 [ 49.052203] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,6 [ 49.350465] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 49.356188] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 54.275431] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 54.281151] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 63.058675] mtp_release [ 63.058677] Trying to set usb power supply type 4 [ 63.058687] msm_otg 78db000.usb: Avail curr from USB = 100 [ 63.058705] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 63.058835] android_work: sent uevent USB_STATE=DISCONNECTED [ 63.066068] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 63.066090] Trying to set usb power supply type 4 [ 63.066100] msm_otg 78db000.usb: Avail curr from USB = 2 [ 63.066122] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 63.097284] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 63.097333] Trying to set usb power supply type 4 [ 63.097344] msm_otg 78db000.usb: Avail curr from USB = 100 [ 63.097363] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 63.097467] android_work: did not send uevent (0 0 00000000) [ 63.104763] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 63.104806] Trying to set usb power supply type 4 [ 63.104816] msm_otg 78db000.usb: Avail curr from USB = 2 [ 63.104837] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 63.858822] mtp_open [ 63.866774] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 63.866851] Trying to set usb power supply type 4 [ 63.866862] msm_otg 78db000.usb: Avail curr from USB = 100 [ 63.866884] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 63.866988] android_work: did not send uevent (0 0 00000000) [ 63.874255] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 63.874301] Trying to set usb power supply type 4 [ 63.874313] msm_otg 78db000.usb: Avail curr from USB = 2 [ 63.874336] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 64.685078] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 64.685162] Trying to set usb power supply type 4 [ 64.685173] msm_otg 78db000.usb: Avail curr from USB = 100 [ 64.685193] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 64.685295] android_work: did not send uevent (0 0 00000000) [ 64.692565] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 64.692605] Trying to set usb power supply type 4 [ 64.692617] msm_otg 78db000.usb: Avail curr from USB = 2 [ 64.692638] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 64.695574] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 64.695633] Trying to set usb power supply type 4 [ 64.695642] msm_otg 78db000.usb: Avail curr from USB = 100 [ 64.695658] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 64.695752] android_work: did not send uevent (0 0 00000000) [ 64.764796] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 64.764838] Trying to set usb power supply type 4 [ 64.764848] msm_otg 78db000.usb: Avail curr from USB = 2 [ 64.764869] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 64.856548] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 64.856612] Trying to set usb power supply type 4 [ 64.856622] msm_otg 78db000.usb: Avail curr from USB = 100 [ 64.856639] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 64.856737] android_work: did not send uevent (0 0 00000000) [ 64.928546] android_work: sent uevent USB_STATE=CONNECTED [ 64.943787] configfs-gadget gadget: high-speed config #1: b [ 64.943909] Trying to set usb power supply type 4 [ 64.943921] msm_otg 78db000.usb: Avail curr from USB = 500 [ 64.943944] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,6 [ 64.943988] android_work: sent uevent USB_STATE=CONFIGURED [ 65.232128] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 65.248670] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 66.798305] QG_WS: effective vote is now 1 voted by FIFO_DONE_VOTER,1 [ 69.882344] [ktd]ktd3137_brightness_set brightness = 5 [ 69.882344] [ 69.882355] [ktd]ktd3137_brightness_set The lowest brightness = 7 [ 69.882355] [ 71.887463] [ktd]ktd3137_brightness_set brightness = 0 [ 71.887463] [ 71.900216] ILITEK:INFO (ilitek_tddi_sleep_handler, 362): TP normal suspend start [ 71.900220] ILITEK:INFO (ilitek_tddi_ic_func_ctrl, 385): func = sense, len = 3, cmd = 0x1, 01, 0x0 [ 71.903671] ILITEK:INFO (core_spi_ice_mode_read, 428): WARRING! size(2) > len(1), use len to get data [ 71.903981] ILITEK:INFO (ilitek_tddi_ic_check_busy, 723): Check busy free [ 71.903985] ILITEK:INFO (ilitek_tddi_ic_func_ctrl, 385): func = sleep, len = 3, cmd = 0x1, 02, 0x3 [ 71.904615] ILITEK:INFO (ilitek_tddi_sleep_handler, 379): TP normal suspend end [ 71.919672] lcd-time event blank begin! [ 71.919674] lcd-time event blank end! [ 77.463466] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 77.463528] Trying to set usb power supply type 4 [ 77.463538] msm_otg 78db000.usb: Avail curr from USB = 2 [ 77.463559] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 77.684880] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 77.685018] mtp_release [ 77.685051] Trying to set usb power supply type 4 [ 77.685062] msm_otg 78db000.usb: Avail curr from USB = 100 [ 77.685082] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 77.685265] android_work: sent uevent USB_STATE=DISCONNECTED [ 77.692370] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 77.692416] Trying to set usb power supply type 4 [ 77.692428] msm_otg 78db000.usb: Avail curr from USB = 2 [ 77.692454] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 77.903959] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 77.904058] Trying to set usb power supply type 4 [ 77.904069] msm_otg 78db000.usb: Avail curr from USB = 100 [ 77.904092] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 77.904406] android_work: did not send uevent (0 0 00000000) [ 78.148447] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 78.148521] Trying to set usb power supply type 4 [ 78.148531] msm_otg 78db000.usb: Avail curr from USB = 2 [ 78.148553] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 78.485176] mtp_open [ 78.506373] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 78.506462] Trying to set usb power supply type 4 [ 78.506472] msm_otg 78db000.usb: Avail curr from USB = 100 [ 78.506492] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 78.506592] android_work: did not send uevent (0 0 00000000) [ 78.568589] android_work: sent uevent USB_STATE=CONNECTED [ 78.572216] Trying to set usb power supply type 4 [ 78.572255] android_work: sent uevent USB_STATE=DISCONNECTED [ 78.646582] android_work: sent uevent USB_STATE=CONNECTED [ 78.648700] configfs-gadget gadget: high-speed config #1: b [ 78.648823] Trying to set usb power supply type 4 [ 78.648835] msm_otg 78db000.usb: Avail curr from USB = 500 [ 78.648858] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,6 [ 78.648885] android_work: sent uevent USB_STATE=CONFIGURED [ 78.883935] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 78.900473] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 79.822831] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received [ 79.822890] Trying to set usb power supply type 4 [ 79.822900] msm_otg 78db000.usb: Avail curr from USB = 2 [ 79.822920] USB_ICL: effective vote is now 2000 voted by USB_PSY_VOTER,6 [ 80.099198] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received [ 80.099335] mtp_release [ 80.099358] Trying to set usb power supply type 4 [ 80.099369] msm_otg 78db000.usb: Avail curr from USB = 100 [ 80.099389] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,6 [ 80.099529] android_work: sent uevent USB_STATE=DISCONNECTED [ 80.161623] android_work: sent uevent USB_STATE=CONNECTED [ 80.165347] Trying to set usb power supply type 4 [ 80.165387] android_work: sent uevent USB_STATE=DISCONNECTED [ 80.239492] android_work: sent uevent USB_STATE=CONNECTED [ 80.241243] configfs-gadget gadget: high-speed config #1: b [ 80.241426] android_work: sent uevent USB_STATE=CONFIGURED [ 80.241443] Trying to set usb power supply type 4 [ 80.241502] msm_otg 78db000.usb: Avail curr from USB = 500 [ 80.241541] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,6 [ 80.449267] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 80.454995] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 80.899469] mtp_open [ 103.620969] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 103.626684] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 125.236163] pmi632_charger: usb_source_change_irq_handler: APSD_STATUS = 0x11,APSD_RESULT = 0x01 [ 151.369404] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 151.380219] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 203.461014] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 203.471831] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 516.171489] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 516.177210] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 568.318324] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 568.329139] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 620.435642] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 620.446459] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 672.565091] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 672.575268] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 724.689755] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 724.700569] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 776.816562] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 776.827378] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 828.945764] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 828.962309] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 881.075807] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 881.092355] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 933.204942] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 933.221487] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 985.327753] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 985.333480] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 1004.313163] PL_AWAKE: effective vote is now 1 voted by TAPER_END_VOTER,1 [ 1004.314453] PL_AWAKE: effective vote is now 0 voted by TAPER_END_VOTER,1 [ 1037.450293] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 1037.456017] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [ 1525.530145] AWAKE: effective vote is now 1 voted by CHG_TERMINATION_VOTER,1 [ 1525.530168] AWAKE: effective vote is now 0 voted by CHG_TERMINATION_VOTER,1 [11767.515513] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [11767.521247] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [11767.558154] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [11767.565795] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [12214.090508] AWAKE: effective vote is now 1 voted by CHG_TERMINATION_VOTER,1 [12214.090532] AWAKE: effective vote is now 0 voted by CHG_TERMINATION_VOTER,1 [13290.693458] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [13290.704326] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [13295.185611] mdss_dsi_ili9881h_hdplus_video_c3i:bklic=24:wpoint=291311:1:none:cfg:single_dsi rootwait ro init=/init androidboot.dtbo_idx=6 res=-1 [13295.185614] mdss_dsi_panel_reset: ILITEK LCD Call TP Reset start! [13295.185625] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [13295.186082] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [13295.188570] ILITEK:INFO (ilitek_tddi_reset_ctrl, 672): TP HW RST [13295.199578] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Enable ICE mode, mcu on = 0 [13295.199874] ILITEK:INFO (ilitek_tddi_ic_check_support, 80): ILITEK CHIP (98811105, 9881) found. [13295.200029] ILITEK:INFO (ilitek_tddi_fw_upgrade, 1430): Convert FW file from HEX_FILE [13295.200032] ILITEK:INFO (ilitek_tdd_fw_hex_open, 1313): Open file method = FILP_OPEN, path = /vendor/firmware/ILITEK_FW [13295.200136] ILITEK:ERR (ilitek_tdd_fw_hex_open, 1344): Failed to open the file at -2. [13295.200138] ILITEK:ERR (ilitek_tddi_fw_upgrade, 1434): Open hex file fail, try upgrade from ILI file [13295.200141] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1146): Start to parse ILI file, type = 159, block_count = 5 [13295.200144] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[1]: start_addr = 0, end = ffff [13295.200146] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[2]: start_addr = 10000, end = 11fff [13295.200149] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[3]: start_addr = 12000, end = 121ff [13295.200151] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[4]: start_addr = 1d000, end = 1efff [13295.200154] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1182): Block[5]: start_addr = 13000, end = 1cfff [13295.200156] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1193): Tag 0xB0: change Block[2] to addr = 0x20870 [13295.200159] ILITEK:INFO (ilitek_tddi_fw_ili_convert, 1193): Tag 0xB0: change Block[3] to addr = 0x20670 [13295.200228] ILITEK:INFO (ilitek_tddi_fw_update_block_info, 1136): New FW ver = 0x4011600 [13295.200231] ILITEK:INFO (ilitek_tddi_fw_update_block_info, 1137): star_addr = 0x000000, end_addr = 0x01F000, Block Num = 5 [13295.200960] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download AP code from hex 0x0 to IRAM 0x0, len = 0x10000 [13295.202001] mdss_dsi_panel_reset: ILITEK LCD Call TP Reset end! [13295.237007] lcd-time event unblank begin! [13295.278756] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): AP CRC is Correct ! (f56fa10e) : (f56fa10e) [13295.278759] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download DATA code from hex 0x10000 to IRAM 0x20870, len = 0x2000 [13295.290810] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): DATA CRC is Correct ! (18dcba9) : (18dcba9) [13295.290814] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 823): Download TUNING code from hex 0x12000 to IRAM 0x20670, len = 0x200 [13295.294613] ILITEK:INFO (ilitek_tddi_fw_iram_upgrade, 837): TUNING CRC is Correct ! (17d552db) : (17d552db) [13295.294616] ILITEK:INFO (ilitek_tddi_reset_ctrl, 660): TP IC Code RST [13295.294711] ILITEK:INFO (ilitek_ice_mode_ctrl, 214): Disable ICE mode, mcu on = 0 [13295.382735] mdss_dsi_cmds_tx: failed to call [13295.383093] lcd-time event unblank end! [13295.394842] ILITEK:INFO (ilitek_tddi_fw_check_update, 1389): FW upgrade PASS [13295.394872] ILITEK:INFO (ilitek_tddi_fw_upgrade_handler, 475): Flash FW completed ... update TP/FW info [13295.394879] ILITEK:INFO (ilitek_tddi_ic_check_protocol_ver, 1018): same procotol version, do nothing [13295.394885] ILITEK:INFO (ilitek_tddi_ic_get_protocl_ver, 1081): Protocol version = 5.5.0 [13295.394893] ILITEK:INFO (ilitek_tddi_ic_get_fw_ver, 879): [Vendor]Tianma(TP) + Tianma(LCD), [TP-IC]ILITEK9881H, [FW]Ver:4.1.22.0 [13295.394899] [hq_regiser_hw_info]: device has already registed hw->id:0x23 hw_device_name:[Vendor]Tianma(TP) + Tianma(LCD), [TP-IC]ILITEK9881H, [FW]Ver:4.1.22.0 [13295.394899] [13295.394907] ILITEK:INFO (ilitek_tddi_ic_get_core_ver, 828): Core version = 1.4.0.0 [13295.394914] ILITEK:INFO (ilitek_tddi_ic_get_tp_info, 1009): TP Info: xch = 18, ych = 32, stx = 18, srx = 32, max_x = 2047, max_y = 2047 [13295.394914] [13295.394921] ILITEK:INFO (ilitek_tddi_ic_get_panel_info, 918): Panel info: width = 720, height = 1520 [13295.450386] [ktd]ktd3137_brightness_set brightness = 489 [13295.450386] [13341.445071] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [13341.450797] pmi632_charger: default_irq_handler: IRQ: usbin-collapse, APSD = SDP [13354.644947] [ktd]ktd3137_brightness_set brightness = 5 [13354.644947] [13354.644961] [ktd]ktd3137_brightness_set The lowest brightness = 7 [13354.644961] [13356.651289] [ktd]ktd3137_brightness_set brightness = 0 [13356.651289] [13356.663928] ILITEK:INFO (ilitek_tddi_sleep_handler, 362): TP normal suspend start [13356.663933] ILITEK:INFO (ilitek_tddi_ic_func_ctrl, 385): func = sense, len = 3, cmd = 0x1, 01, 0x0 [13356.695699] ILITEK:INFO (core_spi_ice_mode_read, 428): WARRING! size(2) > len(1), use len to get data [13356.696016] ILITEK:INFO (ilitek_tddi_ic_check_busy, 723): Check busy free [13356.696020] ILITEK:INFO (ilitek_tddi_ic_func_ctrl, 385): func = sleep, len = 3, cmd = 0x1, 02, 0x3 [13356.696582] ILITEK:INFO (ilitek_tddi_sleep_handler, 379): TP normal suspend end [13356.703277] lcd-time event blank begin! [13356.703278] lcd-time event blank end! [13426.414420] type=1400 audit(1627241896.195:536): avc: denied { read } for pid=522 comm="recovery" name="mtp_usb" dev="tmpfs" ino=17504 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1 [13426.414460] type=1400 audit(1627255311.185:537): avc: denied { ioctl } for pid=522 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=17504 ioctlcmd=0x4d03 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1 [13439.783291] logd: logdr: UID=0 GID=0 PID=590 n tail=0 logMask=19 pid=0 start=0ns timeout=0ns