U-Boot 2010.12.6 (Mar 09 2016 - 19:56:30) (primary) Power LED ON CPU0: P1020E, Version: 1.1, (0x80ec0011) Core: E500, Version: 5.1, (0x80212051) Clock Configuration: CPU0:800 MHz, CPU1:800 MHz, CCB:400 MHz, DDR:333.333 MHz (666.667 MT/s data rate) (Asynchronous), LBC:25 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: P1020RDB CPLD: V15.15 PCBA: V15.0 rom_loc: nor upper bank SD/MMC : 4-bit Mode eSPI : Enabled I2C: ready SPI: ready DRAM: Configuring DDR for 666.667 MT/s data rate DDR: 256 MiB (DDR3, 32-bit, CL=6, ECC off) Testing DRAM from 0x00010000 to 0x000fffff DRAM test phase 1: DRAM test phase 2: DRAM test passed. FLASH: 64 MiB L2: 256 KB enabled MMC: FSL_ESDHC: 0 PCIe1: Root Complex of mini PCIe SLOT, x1, regs @ 0xffe0a000 01:00.0 - 168c:003c - Network controller PCIe1: Bus 00 - 01 PCIe2: Root Complex of PCIe SLOT, x1, regs @ 0xffe09000 03:00.0 - 168c:0033 - Network controller PCIe2: Bus 02 - 03 In: serial Out: serial Err: serial Net: eTSEC1, eTSEC3 ### JFFS2 loading '/home/config/shadow' rescan: First time in use Scanning JFFS2 FS: . done. load: loaded '/home/config/shadow' to 0xfac05d0 (116 bytes) ### JFFS2 load complete: 116 bytes loaded Hit 'd' for diagnostics, or any other key to stop autoboot: 0 [30s timeout] login: admin password: new2day Boot (PRI)-> setenv ipaddr 192.168.2.45 Boot (PRI)-> setenv serverip 192.168.2.30 Boot (PRI)-> tftpboot 0x2000000 openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin Speed: 1000, full duplex Using eTSEC1 device TFTP from server 192.168.2.30; our IP address is 192.168.2.45 Filename 'openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin'. Load address: 0x2000000 Loading: T T T T T T T T Abort Boot (PRI)-> setenv ipaddr 192.168.2.49 Boot (PRI)-> setenv serverip 192.168.2.45 Boot (PRI)-> tftpboot 0x2000000 openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin Speed: 1000, full duplex Using eTSEC1 device TFTP from server 192.168.2.45; our IP address is 192.168.2.49 Filename 'openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin'. Load address: 0x2000000 Loading: T T T T T T T T Abort Boot (PRI)-> setenv serverip 192.168.2.188 Boot (PRI)-> tftpboot 0x2000000 openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin Speed: 1000, full duplex Using eTSEC1 device TFTP from server 192.168.2.188; our IP address is 192.168.2.49 Filename 'openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin'. Load address: 0x2000000 Loading: ################################################################## ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# done Bytes transferred = 6374948 (614624 hex) Boot (PRI)-> interrupts off; bootm start 0x2000000; bootm loados; bootm ramdisk; fdt resize; fdt boardsetup; fdt chosen; bootm prep; bootm go ## Booting kernel from FIT Image at 02000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: POWERPC OpenWrt Linux-5.10.82 Type: Kernel Image Compression: lzma compressed Data Start: 0x020000ec Data Size: 6362236 Bytes = 6.1 MiB Architecture: PowerPC OS: Linux Load Address: 0x00000000 Entry Point: 0x00000000 Hash algo: crc32 Hash value: 0d35c1e8 Hash algo: sha1 Hash value: e59c0fea2564f66752644ba250a1ff93d7c43101 Verifying Hash Integrity ... crc32+ sha1+ OK ## Flattened Device Tree from FIT Image at 02000000 Using 'config-1' configuration Trying 'fdt-1' FDT blob subimage Description: POWERPC OpenWrt extreme-networks_ws-ap3825i device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x026116b8 Data Size: 10777 Bytes = 10.5 KiB Architecture: PowerPC Hash algo: crc32 Hash value: a85d732a Hash algo: sha1 Hash value: 568cdecfa6df5897f8658c3b1ad6d8a3fd7e1aa3 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x26116b8 Uncompressing Kernel Image ... OK ft_fixup_l2cache: FDT_ERR_NOTFOUND [ 0.000000] Memory CAM mapping: 256 Mb, residual: 0Mb [ 0.000000] Linux version 5.10.82 (labby@lobon) (powerpc-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r18216+1-a662d8550f) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sun Nov 28 02:05:00 2021 [ 0.000000] ##### ws_ap3825i_probe: PASSED: L 76 [ 0.000000] Using P1020 RDB machine description [ 0.000000] ioremap() called early from find_legacy_serial_ports+0x5ec/0x6f8. Use early_ioremap() instead [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x10000000 [ 0.000000] dcache_bsize = 0x20 [ 0.000000] icache_bsize = 0x20 [ 0.000000] cpu_features = 0x0000000010010128 [ 0.000000] possible = 0x0000000010010128 [ 0.000000] always = 0x0000000010010128 [ 0.000000] cpu_user_features = 0x84e08000 0x08000000 [ 0.000000] mmu_features = 0x00020010 [ 0.000000] ----------------------------------------------------- [ 0.000000] ##### ws_ap3825i_setup_arch: PASSED: L 58 ws_ap3825i_setup_arch() [ 0.000000] ioremap() called early from mpc85xx_setup_pmc+0x38/0x8c. Use early_ioremap() instead [ 0.000000] WS-AP3825i board from Extreme Networks [ 0.000000] barrier-nospec: using isync; sync as speculation barrier [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts [ 0.000000] percpu: Embedded 12 pages/cpu s18700 r8192 d22260 u49152 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyS0,115200n81 panic=30 ro mtdparts=ec000000.nor:62848K(FS),128K(CALIB),512K(BootPRI),128K(NVRAM1),128K(NVRAM2),128K(NVRAM3),128K(NVRAM4),128K(NVRAM5),128K(NVRAM6),128K(NVRAM7),128K(NVRAM8),128K(CFG2),128K(CFG1) BOOT_KERNEL=primary BOOT_BOOTROM="U-Boot 2010.12.6 (Mar 09 2016 - 19:56:30)" [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 246984K/262144K available (6716K kernel code, 640K rwdata, 1324K rodata, 3536K init, 219K bss, 15160K reserved, 0K cma-reserved) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xffbdf000..0xfffff000 : fixmap [ 0.000000] * 0xffbdc000..0xffbdf000 : early ioremap [ 0.000000] * 0xd1000000..0xffbdc000 : vmalloc & ioremap [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe40000, max 2 CPUs [ 0.000000] mpic: ISU size: 256, shift: 8, mask: ff [ 0.000000] ##### ws_ap3825i_pic_init: PASSED: L 48 [ 0.000000] mpic: Initializing for 256 sources [ 0.000000] random: get_random_u32 called from start_kernel+0x344/0x4bc with crng_init=0 [ 0.000012] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.010240] clocksource: timebase mult[14000000] shift[24] registered [ 0.016716] pid_max: default: 32768 minimum: 301 [ 0.021380] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.028626] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.037227] mpic: requesting IPIs... [ 0.041459] rcu: Hierarchical SRCU implementation. [ 0.046331] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.054112] smp: Bringing up secondary CPUs ... [ 0.059305] smp: Brought up 1 node, 2 CPUs [ 0.065894] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.075674] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.083408] NET: Registered protocol family 16 [ 0.100209] Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->1 [ 0.108069] PCI host bridge /pcie@ffe09000 (primary) ranges: [ 0.113699] MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000 [ 0.120901] IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000 [ 0.128046] /pcie@ffe09000: PCICSRBAR @ 0xfff00000 [ 0.132791] setup_pci_atmu: end of DRAM 10000000 [ 0.138114] Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->1 [ 0.145981] PCI host bridge /pcie@ffe0a000 ranges: [ 0.150822] MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000 [ 0.158024] IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000 [ 0.165168] /pcie@ffe0a000: PCICSRBAR @ 0xfff00000 [ 0.169913] setup_pci_atmu: end of DRAM 10000000 [ 0.176474] PCI: Probing PCI hardware [ 0.180209] fsl-pci ffe09000.pcie: PCI host bridge to bus 9000:00 [ 0.186320] pci_bus 9000:00: root bus resource [io 0x0000-0xffff] [ 0.192411] pci_bus 9000:00: root bus resource [mem 0xa0000000-0xbfffffff] [ 0.199296] pci_bus 9000:00: root bus resource [bus 00-ff] [ 0.204739] pci_bus 9000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.211394] pci 9000:00:00.0: [1957:0100] type 01 class 0x060400 [ 0.217334] pci 9000:00:00.0: reg 0x10: [mem 0xfff00000-0xffffffff] [ 0.223645] pci 9000:00:00.0: supports D1 D2 [ 0.227825] pci 9000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.235628] pci 9000:01:00.0: [168c:0033] type 00 class 0x028000 [ 0.241578] pci 9000:01:00.0: reg 0x10: [mem 0xa0000000-0xa001ffff 64bit] [ 0.248386] pci 9000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.255101] pci 9000:01:00.0: supports D1 [ 0.259031] pci 9000:01:00.0: PME# supported from D0 D1 D3hot [ 0.289877] pci 9000:00:00.0: PCI bridge to [bus 01-ff] [ 0.295025] pci 9000:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.301134] pci 9000:00:00.0: bridge window [mem 0xa0000000-0xa00fffff] [ 0.307881] pci_bus 9000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.314484] pci_bus 9000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.321289] fsl-pci ffe0a000.pcie: PCI host bridge to bus a000:02 [ 0.327326] pci_bus a000:02: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 0.336238] pci_bus a000:02: root bus resource [mem 0x80000000-0x9fffffff] [ 0.343106] pci_bus a000:02: root bus resource [bus 02-ff] [ 0.348564] pci_bus a000:02: busn_res: [bus 02-ff] end is updated to ff [ 0.355206] pci a000:02:00.0: [1957:0100] type 01 class 0x060400 [ 0.361161] pci a000:02:00.0: reg 0x10: [mem 0xfff00000-0xffffffff] [ 0.367483] pci a000:02:00.0: supports D1 D2 [ 0.371663] pci a000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.379268] pci a000:02:00.0: Primary bus is hard wired to 0 [ 0.384844] pci a000:02:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring [ 0.393038] pci a000:03:00.0: [168c:003c] type 00 class 0x028000 [ 0.398979] pci a000:03:00.0: reg 0x10: [mem 0x80000000-0x801fffff 64bit] [ 0.405783] pci a000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.412504] pci a000:03:00.0: supports D1 D2 [ 0.447527] pci a000:02:00.0: PCI bridge to [bus 03-ff] [ 0.452674] pci a000:02:00.0: bridge window [io 0x20000-0x20fff] [ 0.458956] pci a000:02:00.0: bridge window [mem 0x80000000-0x801fffff] [ 0.465703] pci_bus a000:03: busn_res: [bus 03-ff] end is updated to 03 [ 0.472306] pci_bus a000:02: busn_res: [bus 02-ff] end is updated to 03 [ 0.479001] PCI: Cannot allocate resource region 0 of device 9000:00:00.0, will remap [ 0.486760] PCI: Cannot allocate resource region 0 of device a000:02:00.0, will remap [ 0.494599] pci 9000:00:00.0: BAR 0: no space for [mem size 0x00100000] [ 0.501162] pci 9000:00:00.0: BAR 0: failed to assign [mem size 0x00100000] [ 0.508101] pci 9000:01:00.0: BAR 6: assigned [mem 0xa0020000-0xa002ffff pref] [ 0.515309] pci 9000:00:00.0: PCI bridge to [bus 01] [ 0.520247] pci 9000:00:00.0: bridge window [io 0x0000-0xffff] [ 0.526342] pci 9000:00:00.0: bridge window [mem 0xa0000000-0xbfffffff] [ 0.533094] pci_bus 9000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.542130] pci_bus 9000:00: resource 4 [io 0x0000-0xffff] [ 0.547674] pci_bus 9000:00: resource 5 [mem 0xa0000000-0xbfffffff] [ 0.553933] pci_bus 9000:01: resource 0 [io 0x0000-0xffff] [ 0.559479] pci_bus 9000:01: resource 1 [mem 0xa0000000-0xbfffffff] [ 0.565745] pci a000:02:00.0: BAR 0: no space for [mem size 0x00100000] [ 0.572325] pci a000:02:00.0: BAR 0: failed to assign [mem size 0x00100000] [ 0.579284] pci a000:03:00.0: BAR 6: assigned [mem 0x80200000-0x8020ffff pref] [ 0.586474] pci a000:02:00.0: PCI bridge to [bus 03] [ 0.591433] pci a000:02:00.0: bridge window [io 0x20000-0x2ffff] [ 0.597672] pci a000:02:00.0: bridge window [mem 0x80000000-0x9fffffff] [ 0.604459] pci_bus a000:02: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.613470] pci_bus a000:02: resource 4 [io 0x20000-0x2ffff] [ 0.619208] pci_bus a000:02: resource 5 [mem 0x80000000-0x9fffffff] [ 0.625447] pci_bus a000:03: resource 0 [io 0x20000-0x2ffff] [ 0.631184] pci_bus a000:03: resource 1 [mem 0x80000000-0x9fffffff] [ 0.637545] /soc@ffe00000/timer@41100: cannot get timer frequency. [ 0.643716] /soc@ffe00000/timer@42100: cannot get timer frequency. [ 0.665868] clocksource: Switched to clocksource timebase [ 0.672107] NET: Registered protocol family 2 [ 0.676549] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.684166] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.692477] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.700103] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.707237] TCP: Hash tables configured (established 2048 bind 2048) [ 0.713617] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.720095] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.727178] NET: Registered protocol family 1 [ 0.731507] PCI: CLS 32 bytes, default 32 [ 5.135453] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 5.145482] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.151270] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.161996] pcieport 9000:00:00.0: enabling device (0106 -> 0107) [ 5.168366] pcieport a000:02:00.0: enabling device (0106 -> 0107) [ 5.195210] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 5.202395] printk: console [ttyS0] disabled [ 5.206710] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42, base_baud = 24999999) is a 16550A [ 5.215381] printk: console [ttyS0] enabled [ 5.215381] printk: console [ttyS0] enabled [ 5.223700] printk: bootconsole [udbg0] disabled [ 5.223700] printk: bootconsole [udbg0] disabled [ 5.233576] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 24999999) is a 16550A [ 5.243365] printk: console [ttyS0] disabled [ 5.247842] printk: console [ttyS0] enabled [ 5.252970] ffe04600.serial: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 24999999) is a 16550 [ 5.263747] physmap-flash ec000000.nor: physmap platform flash device: [mem 0xec000000-0xefffffff] [ 5.272825] ec000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x00227e [ 5.282843] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.287995] Amd/Fujitsu Extended Query version 1.3. [ 5.293046] number of CFI chips: 1 [ 5.314937] 6 fixed-partitions partitions found on MTD device ec000000.nor [ 5.321881] Creating 6 MTD partitions on "ec000000.nor": [ 5.327219] 0x000000000000-0x000003d60000 : "firmware" [ 5.336581] read error in "firmware" at offset 0x3d60000 [ 5.341910] 0x000003d60000-0x000003d80000 : "calib" [ 5.347366] 0x000003d80000-0x000003e00000 : "u-boot" [ 5.352876] 0x000003e00000-0x000003f00000 : "nvram" [ 5.358346] 0x000003f00000-0x000003f20000 : "cfg2" [ 5.363858] 0x000003f20000-0x000003f40000 : "cfg1" [ 5.372960] fsl_espi ffe07000.spi: irq = 59 [ 5.378788] libphy: Fixed MDIO Bus: probed [ 5.383753] libphy: Freescale PowerQUICC MII Bus: probed [ 5.408678] fsl-gianfar soc@ffe00000:ethernet@b0000: enabled errata workarounds, flags: 0x4 [ 5.427954] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: mac: d8:84:66:78:dc:f6 [ 5.435361] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: Running with NAPI enabled [ 5.443038] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: RX BD ring size for Q[0]: 256 [ 5.451047] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: RX BD ring size for Q[1]: 256 [ 5.459056] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: TX BD ring size for Q[0]: 256 [ 5.467065] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: TX BD ring size for Q[1]: 256 [ 5.475613] fsl-gianfar soc@ffe00000:ethernet@b1000: enabled errata workarounds, flags: 0x4 [ 5.494630] fsl-gianfar soc@ffe00000:ethernet@b1000 eth1: mac: d8:84:66:78:dc:f5 [ 5.502060] fsl-gianfar soc@ffe00000:ethernet@b1000 eth1: Running with NAPI enabled [ 5.509725] fsl-gianfar soc@ffe00000:ethernet@b1000 eth1: RX BD ring size for Q[0]: 256 [ 5.517733] fsl-gianfar soc@ffe00000:ethernet@b1000 eth1: RX BD ring size for Q[1]: 256 [ 5.525732] fsl-gianfar soc@ffe00000:ethernet@b1000 eth1: TX BD ring size for Q[0]: 256 [ 5.533739] fsl-gianfar soc@ffe00000:ethernet@b1000 eth1: TX BD ring size for Q[1]: 256 [ 5.541959] ucc_geth_driver: QE UCC Gigabit Ethernet Controller [ 5.548223] i2c /dev entries driver [ 5.552026] mpc-i2c ffe03000.i2c: timeout 1000000 us [ 5.557369] mpc-i2c ffe03100.i2c: timeout 1000000 us [ 5.562733] booke_wdt: powerpc book-e watchdog driver loaded [ 5.569222] NET: Registered protocol family 10 [ 5.574703] Segment Routing with IPv6 [ 5.578545] NET: Registered protocol family 17 [ 5.583032] 8021q: 802.1Q VLAN Support v1.8 [ 5.587325] drmem: No dynamic reconfiguration memory found [ 5.593196] random: fast init done [ 5.608073] Freeing unused kernel memory: 3536K [ 5.665895] Run /init as init process [ 5.983234] init: Console is alive [ 5.986932] init: - watchdog - [ 5.999556] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 6.016716] usbcore: registered new interface driver usbfs [ 6.022297] usbcore: registered new interface driver hub [ 6.027723] usbcore: registered new device driver usb [ 6.036001] Button Hotplug driver version 0.4.1 [ 6.042166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.049727] ehci-fsl: Freescale EHCI Host controller driver [ 6.056340] ehci-platform: EHCI generic platform driver [ 6.065750] input: keys as /devices/platform/keys/input/input0 [ 6.072247] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.081605] init: - preinit - [ 6.259116] random: procd: uninitialized urandom read (4 bytes read) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 10.361277] procd: - early - [ 10.364302] procd: - watchdog - [ 11.133108] procd: - watchdog - [ 11.136575] procd: - ubus - [ 11.143912] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.189616] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.196303] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.204607] procd: - init - Please press Enter to activate this console. [ 11.473935] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.577417] urngd: v1.0.2 started. [ 11.691638] Loading modules backported from Linux version v5.15-rc6-0-g519d81956ee2 [ 11.699363] Backport generated by backports.git v5.15-rc6-1-0-gd44432d6 [ 11.701947] random: crng init done [ 11.709449] random: 6 urandom warning(s) missed due to ratelimiting [ 11.733233] xt_time: kernel timezone is -0000 [ 11.799582] PPP generic driver version 2.4.2 [ 11.805812] NET: Registered protocol family 24 [ 11.844514] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x3c. [ 11.855401] ath10k_pci a000:03:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 12.804041] ath10k_pci a000:03:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 12.813362] ath10k_pci a000:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 12.823952] ath10k_pci a000:03:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f [ 12.918037] ath10k_pci a000:03:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 13.776099] ath10k_pci a000:03:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256 [ 13.793275] ath10k_pci a000:03:00.0: wmi print 'P 128 V 8 T 410' [ 13.799452] ath10k_pci a000:03:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0' [ 13.807474] ath10k_pci a000:03:00.0: wmi print 'alloc rem: 24984 iram: 38672' [ 13.875186] ath10k_pci a000:03:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 [ 13.884874] ath10k_pci a000:03:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000 [ 14.178640] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xd5920000, irq=17 [ 14.188715] kmodloader: done loading kernel modules from /etc/modules.d/* [ 31.839005] br-lan: port 1(eth0) entered blocking state [ 31.844239] br-lan: port 1(eth0) entered disabled state [ 31.849877] device eth0 entered promiscuous mode [ 34.986361] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: Link is Up - 1Gbps/Full - flow control off [ 34.995527] br-lan: port 1(eth0) entered blocking state [ 35.000778] br-lan: port 1(eth0) entered forwarding state [ 35.006933] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready BusyBox v1.34.1 (2021-11-28 02:05:00 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r18216+1-a662d8550f ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/# uci set network.lan.ipaddr="192.168.2.45" root@OpenWrt:/# uci set network.lan.gateway="192.168.2.1" root@OpenWrt:/# uci set network.lan.dns="192.168.2.1" root@OpenWrt:/# uci commit root@OpenWrt:/# /etc/init.d/network restart 'radio0' is disabled 'radio1' is disabled [ 91.089503] br-lan: port 1(eth0) entered disabled state [ 91.100530] device eth0 left promiscuous mode [ 91.105047] br-lan: port 1(eth0) entered disabled state [ 91.158203] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: Link is Down root@OpenWrt:/# [ 93.769124] br-lan: port 1(eth0) entered blocking state [ 93.774358] br-lan: port 1(eth0) entered disabled state [ 93.780011] device eth0 entered promiscuous mode [ 96.916357] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: Link is Up - 1Gbps/Full - flow control off [ 96.925523] br-lan: port 1(eth0) entered blocking state [ 96.930777] br-lan: port 1(eth0) entered forwarding state [ 96.937486] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready root@OpenWrt:/# mkdir /tmp/sysupgrade root@OpenWrt:/# cd /tmp/sysupgrade root@OpenWrt:/tmp/sysupgrade# wget https://downloads.laboratoryb.org/releases/sn apshot/targets/mpc85xx/p1020/openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-s quashfs-sysupgrade.bin Downloading 'https://downloads.laboratoryb.org/releases/snapshot/targets/mpc85xx/p1020/openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-squashfs-sysupgrade.bin' Connecting to 204.13.45.156:443 Writing to 'openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-squashfs-sysupgrade.bin' openwrt-mpc85xx-p102 100% |*******************************| 6400k 0:00:00 ETA Download completed (6554430 bytes) root@OpenWrt:/tmp/sysupgrade# sysupgrade -v /tmp/sysupgrade/openwrt-mpc85xx-p102 0-extreme-networks_ws-ap3825i-squashfs-sysupgrade.bin Cannot save config while running from ramdisk. Fri Dec 17 01:10:33 UTC 2021 upgrade: Commencing upgrade. Closing all shell sessions. ComWatchdog handover: fd=3 - watchdog - Watchdog does not have CARDRESET support Fri Dec 17 01:10:34 UTC 2021 upgrade: Sending TERM to remaining processes ... Fri Dec 17 01:10:38 UTC 2021 upgrade: Sending KILL to remaining processes ... [ 150.986201] sh (4242): drop_caches: 3 Fri Dec 17 01:10:44 UTC 2021 upgrade: Switching to ramdisk... Fri Dec 17 01:10:45 UTC 2021 upgrade: Performing system upgrade... [ 152.418942] sh (4242): drop_caches: 3 Unlocking firmware ... Writing from to firmware ... [w] Appending jffs2 data from /tmp/sysupgrade.tgz to firmware.. .File /tmp/sysupgrade.tgz does not exist Fri Dec 17 01:11:25 UTC 2021 upgrade: Upgrade completed Fri Dec 17 01:11:26 UTC 2021 upgrade: Rebooting system... umount: can't unmount /dev: Resource busy umount[ 193.492088] reboot: Restarting system ▒ U-Boot 2010.12.6 (Mar 09 2016 - 19:56:30) (primary) Power LED ON CPU0: P1020E, Version: 1.1, (0x80ec0011) Core: E500, Version: 5.1, (0x80212051) Clock Configuration: CPU0:800 MHz, CPU1:800 MHz, CCB:400 MHz, DDR:333.333 MHz (666.667 MT/s data rate) (Asynchronous), LBC:25 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: P1020RDB CPLD: V15.15 PCBA: V15.0 rom_loc: nor upper bank SD/MMC : 4-bit Mode eSPI : Enabled I2C: ready SPI: ready DRAM: Configuring DDR for 666.667 MT/s data rate DDR: 256 MiB (DDR3, 32-bit, CL=6, ECC off) Testing DRAM from 0x00010000 to 0x000fffff DRAM test phase 1: DRAM test phase 2: DRAM test passed. FLASH: 64 MiB L2: 256 KB enabled MMC: FSL_ESDHC: 0 PCIe1: Root Complex of mini PCIe SLOT, x1, regs @ 0xffe0a000 01:00.0 - 168c:003c - Network controller PCIe1: Bus 00 - 01 PCIe2: Root Complex of PCIe SLOT, x1, regs @ 0xffe09000 03:00.0 - 168c:0033 - Network controller PCIe2: Bus 02 - 03 In: serial Out: serial Err: serial Net: eTSEC1, eTSEC3 ### JFFS2 loading '/home/config/shadow' rescan: First time in use Scanning JFFS2 FS: . done. load: loaded '/home/config/shadow' to 0xfac05d0 (116 bytes) ### JFFS2 load complete: 116 bytes loaded Hit 'd' for diagnostics, or any other key to stop autoboot: 0 ## Executing script at 0ff33414 check for watchdog, limit=3... check for reset by watchdog... no watchdog... bSaveEnviron=0 image_order=primary secondary ### JFFS2 loading 'primary.gz.uImage' find_inode failed for name=primary.gz.uImage load: Failed to find inode ### JFFS2 LOAD ERROR<0> for primary.gz.uImage! ### JFFS2 loading 'secondary.gz.uImage' load: loaded 'secondary.gz.uImage' to 0xa000000 (7068753 bytes) ### JFFS2 load complete: 7068753 bytes loaded ready to boot kernel... [DTB 1] ## Booting kernel from Legacy Image at 0a000000 ... Image Name: Linux Kernel Image (LZMA) Image Type: PowerPC Linux Kernel Image (lzma compressed) Data Size: 7056401 Bytes = 6.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 0a6bac51 Booting using the fdt blob at 0xa6bac51 Uncompressing Kernel Image ... OK Loading Device Tree to 09ffa000, end 09ffffff ... OK Using P1020 RDB machine description Memory CAM mapping: 64/64/64 Mb, residual: 63Mb Linux version 2.6.35--09.21.18.0009+ (root@ngap-fat6) (gcc version 4.3.2 (GCC) ) #2 SMP Wed Jul 12 18:16:45 EDT 2017 CPU maps initialized for 1 thread per core bootconsole [udbg0] enabled setup_arch: bootmem mpc85xx_rdb_setup_arch() Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->1 PCI host bridge /pcie@ffe09000 ranges: MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000 IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000 /pcie@ffe09000: PCICSRBAR @ 0xfff00000 Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->1 PCI host bridge /pcie@ffe0a000 ranges: MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000 IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000 /pcie@ffe0a000: PCICSRBAR @ 0xfff00000 MPC85xx RDB board from Freescale Semiconductor arch: exit Zone PFN ranges: DMA 0x00000000 -> 0x0000c000 Normal empty HighMem 0x0000c000 -> 0x0000ff7f Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x0000ff7f MMU: Allocated 1088 bytes of context maps for 255 contexts PERCPU: Embedded 7 pages/cpu @c1f8b000 s7872 r8192 d12608 u65536 pcpu-alloc: s7872 r8192 d12608 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64896 Kernel command line: mtdparts=ec000000.nor:62848K(FS),128K(CALIB),512K(BootPRI),128K(NVRAM1),128K(NVRAM2),128K(NVRAM3),128K(NVRAM4),128K(NVRAM5),128K(NVRAM6),128K(NVRAM7),128K(NVRAM8),128K(CFG2),128K(CFG1) BOOT_BOOTROM="U-Boot 2010.12.6 (Mar 09 2016 - 19:56:30) (primary)" BOOT_KERNEL=secondary console=ttyS0,115200n81 panic=30 ro PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 228880k/261628k available (29864k kernel code, 32748k reserved, 204k data, 149k bss, 27244k init) Kernel virtual memory layout: * 0xfffbf000..0xfffff000 : fixmap * 0xff800000..0xffc00000 : highmem PTEs * 0xff7d8000..0xff800000 : early ioremap * 0xcd000000..0xff7d8000 : vmalloc & ioremap SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:512 mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe40000, max 2 CPUs mpic: ISU size: 256, shift: 8, mask: ff mpic: Initializing for 256 sources clocksource: timebase mult[5000000] shift[22] registered pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 mpic: requesting IPIs... Processor 1 found. Brought up 2 CPUs NET: Registered protocol family 16 mpc8xxx_add_controller RESET button signal is high mpc8xxx_add_controller hwirq 47 PCI: Probing PCI hardware pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01) pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0001:02:00.0: ignoring class b20 (doesn't match header type 01) pci 0001:02:00.0: PCI bridge to [bus 03-ff] pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x100000) pci 0000:01:00.0: BAR 6: assigned [mem 0xa0020000-0xa002ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io 0xff7ec000-0xff7fbfff] pci 0000:00:00.0: bridge window [mem 0xa0000000-0xbfffffff] pci 0000:00:00.0: bridge window [mem pref disabled] pci 0000:00:00.0: enabling device (0106 -> 0107) pci 0001:02:00.0: BAR 9: can't assign mem pref (size 0x100000) pci 0001:03:00.0: BAR 6: assigned [mem 0x80200000-0x8020ffff pref] pci 0001:02:00.0: PCI bridge to [bus 03-03] pci 0001:02:00.0: bridge window [io 0xff7d9000-0xff7e8fff] pci 0001:02:00.0: bridge window [mem 0x80000000-0x9fffffff] pci 0001:02:00.0: bridge window [mem pref disabled] pci 0001:02:00.0: enabling device (0106 -> 0107) bio: create slab at 0 Freescale Elo / Elo Plus DMA driver Switching to clocksource timebase NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 5, 229376 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 128 (order: 1, 8192 bytes) UDP-Lite hash table entries: 128 (order: 1, 8192 bytes) NET: Registered protocol family 1 fsl-elo-dma ffe21300.dma: #0 (fsl,eloplus-dma-channel), ir ex3ae instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a000c: 0x21b6 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0010: 0x75fb instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0014: 0x6df3 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0018: 0xb320 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a001c: 0x6fdf instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0020: 0xcb01 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0024: 0xc0ea instead Further such events for this eras jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0000: 0x95e7 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0004: 0xede8 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0008: 0x2b32 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c000c: 0x4176 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0010: 0x36fe instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0014: 0x772d instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0018: 0xb785 instead jffs2_scan_eraseblock(): Magitde jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0024: 0xdb89 instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0000: 0xeb18 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0004: 0xfddc instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0008: 0x9fd1 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e000c: 0x2136 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0010: 0x7ef9 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0014: 0xe950 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0018: 0x17bf instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e001c: 0x2fa6 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0020: 0x32aa instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0024: 0x599f instead Further such events for this erase block will not be printed Old JFFS2 bitmask found at 0x005fe108 You cannot use older JFFS2 filesystems with newer kernels jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600000: 0x4bcd instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600004: 0x9abd instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600008: 0x1da5 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0060000c: 0x0c10 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600010: 0x4054 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600014: 0x232b instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600018: 0x9805 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0060001c: 0x5e2e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600020: 0x0e35 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600024: 0x50e1 instead Further such events for this erase block will not be printed Old JFFS2 bitmask found at 0x00605fe0 You cannot use older JFFS2 filesystems with newer kernels jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620000: 0x1407 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620004: 0x1105 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620008: 0x3278 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0062000c: 0xdc78 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620010: 0xe635 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620014: 0x1419 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620018: 0x7dcc instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0062001c: 0xa523 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620020: 0x0441 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620024: 0xfb45 instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00640000: 0xdead instead pid 1's current affinity mask: 3 pid 1's new affinity mask: 1 pid 44's current affinity mask: 3 pid 44's new affinity mask: 1atherosHooks: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint rcS: watchdogDis 0 serNum 16453819085M0000 Waiting for jffsap_drv: trap Monitor has been suspended. 2_gcd_mtd and flush-mtd to finish, wait time 0 seconds. ap_drv: trap Monitor will resume shortly. eth0 hw addr: D8:84:66:78:DC:F6 eth1 hw addr: D8:84:66:78:DC:F5 tunnelDrv: loaded update_compliance_file: /flash/v3_confData.bin up to date (Ver in Image AP3825i-1-71 Ver on AP AP3825i-1-72 format 129) update_compliance_file:Imported Compliance Table V4.16 dated on 4/30/2018 (AP38XX_Power_Settings_V9.xlsx) 3708+0 records in 3708+0 records out 3708+0 records in 3708+0 records out MODEL AP3825i-1 SERVICETYPE siemens SERVICEATTRS ac_manager,ru_manager AC_HOSTNAME Controller VERSIONBASE 0 SERIALNUMBER 16453819085M0000 AP_FLAG 0 AP_MODE 0 NUM_ANTENNAS 6 starting pid 342, tty '': '/sbi (none) ppc #2 SMP Wed Jul 12 18:16:45 EDT 2017 (none) (none) login: